Applications of functionalized transition metal complexes in photonic and optoelectronic devices

Photochemical Au(I)-Au(I) Bond Formation: A Battle between Intersystem Crossing and Internal Conversion

The transition metal complex Au(CN)2- has provided experimental evidence of photoinduced bond formation between Au(I) atoms in solution. However, the underlying photochemical driving force for this bond formation reaction remains unclear. In this study, we investigate the ultrafast Au-Au bonding process in the [Au(CN)2]22- dimer using nonadiabatic dynamics simulations that incorporate intersystem crossing and internal conversion pathways. Reaction pathways and transitions among photochemically accessible singlet and triplet excited states are analyzed. Computational results indicate that intersystem crossing is the primary driving force in the early stages of ultrafast photochemical dynamics, while internal conversion among triplet states plays a critical role after the system stabilizes in a higher-lying triplet state. This work provides a mechanistic perspective on modulating photochemical reactions by tuning the relative strengths of spin-orbit coupling and nonadiabatic coupling.

Electronic Structures of Iron in Oxide Glasses via 1s3p Resonant Inelastic X-ray Scattering

Electronic structures of iron in glasses are essential for unraveling the effect of transition metals on amorphous networks and controlling the electro-optical and transport properties of advanced glasses and amorphous energy-storing materials. The electronic configurations around iron in glasses, however, remain not well understood due to the structural disorders arising from multiple iron species with distinct valence, coordination, and spin states. Here, the first 1s3p resonant inelastic X-ray scattering (RIXS) for oxide glasses identifies hidden electronic configurations for Fe2+ and Fe3+ in amorphous networks. The results allow us to quantify the composition-induced evolution of oxygen ligand-field interactions of high-spin Fe 3d states with varying valence and coordination environments in complex glasses. The distinct electronic structures account for the electronic origins of iron-induced changes in the glass properties. The results offer prospects for a simultaneous probing of valence, coordination, and spin states of transition metals in diverse multicomponent oxide glasses and functional amorphous solids via 1s3p RIXS.

Parametrization of Linear Vibronic Coupling Models for Degenerate Electronic States

Linear vibronic coupling (LVC) models have proven to be effective in describing coupled excited-state potential energy surfaces of rigid molecules. However, obtaining the LVC parameters in molecules with many degrees of freedom and a large number of, possibly (near-)degenerate, electronic states can be challenging. In this paper, we discuss how the linear intra- and interstate couplings can be computed correctly using a numerical differentiation scheme, requiring a phase correction and sufficient numerical precision in the involved electronic structure calculations. The numerical scheme is applied to three test systems with symmetry-induced state degeneracies: SO3, [PtBr6]2-, and [Ru(bpy)3]2+. The first two systems are employed to validate the performance of the parametrization scheme. LVC potentials for SO3 are shown to reproduce the trigonal symmetry of the potential energy surfaces. The integration of the LVC potentials for [PtBr6]2- with the surface-hopping trajectory method illustrates how spurious parameters lead to erroneous trajectory behavior. In the transition metal complex [Ru(bpy)3]2+, extensive nonadiabatic simulations using LVC potentials are compared to those conducted with direct on-the-fly potentials. The simulations with LVC potentials demonstrate excellent agreement with the on-the-fly results while incurring costs that are 5 orders of magnitude lower. Further, the simulations evidence that intersystem crossing in [Ru(bpy)3]2+ occurs at a slightly slower rate than luminescence decay, underscoring the importance of simulating the actual experimental observable when comparing computed time constants with experimental time constants. Lastly, the initial nuclear response to excitation involves a rapid, short-lived, and small elongation of the Ru-N bonds, with no charge localization occurring on a sub-ps time scale.

Molecular Design, DFT Study and Optoelectronics Properties of Several DSSCs Sensitizers Based on Different Donor Groups

Dye-sensitized solar cells (DSSCs) are a type of high-efficiency solar cells that can absorb sunlight using a dye sensitizer positioned on top of a titanium dioxide layer. The sensitizer is the core component in DSSCs, and the photo-to-electric conversion efficiency of DSSCs can be significantly improved by optimizing the dye sensitizer structure and properties. In this paper, a set of D-A-π-A sensitizer (SHY1 ∼ 4) were designed by modifying different donor groups and analyzed their charge transfer and photophysical properties. We compared the geometric structure, frontier molecular orbitals, Uv-vis, charge density difference, transition density matrix, photovoltaic and quantum chemical parameters of several molecules by means of density-functional theory (DFT) and time-dependent density-functional theory (TD-DFT). The results showed that SHY-2 with 4-methoxy-N-(4-methoxyphenyl)-N-phenylaniline as the donor group possessed the most outstanding photophysical and photochemical properties, including the smallest frontier molecular orbitals energy gap, the wider UV-Vis spectral range, the most appropriate open-circuit voltage value and so on, which provided a theoretical basis for the subsequent design and synthesis of molecules.

A promising mesoporous silica carrier material for the diagnosis and treatment of liver diseases: recent research advances

The therapeutic diagnosis of liver diseases has garnered significant interest within the medical community. In recent years, mesoporous silica nanoparticles (MSNs) have emerged as crucial nanocarriers for the treatment of liver ailments. Their remarkable diagnostic capabilities enable them to be used in techniques such as high-throughput mass spectrometry (MS), magnetic resonance imaging (MRI), near-infrared (NIR) fluorescence imaging, photoacoustic imaging (PAI), and ultrasonography (US), attracting considerable attention. Furthermore, the introduction of amino and carboxyl group modifications in MSNs has facilitated their use as drug delivery carriers for treating liver diseases, including hepatocellular carcinoma. This paper reviews the preparation methods, in vitro diagnostic capabilities, and in vivo therapeutic delivery systems of MSNs for liver disease treatment. It also summarizes relevant toxicity studies, aiming to provide a comprehensive overview of the diagnostic and therapeutic applications of MSNs in the treatment of liver diseases, particularly hepatocellular carcinoma. Through this review, we seek to offer theoretical insights into the potential of MSNs for diagnostic and therapeutic applications in liver disease treatment.

Coadsorption of ZnTPP and 2HMCTPP on Rutile TiO2(110)

Pure zinc tetraphenylporphyrin (ZnTPP) adsorbs on rutile TiO2(110) as flat-lying molecules, mostly interacting with the surface through weak van-der-Waals interactions. Pure monocarboxyphenyl triphenylporphyrin (2HMCTPP) forms a covalent bond to the rutile TiO2(110) surface through the carboxylic acid group, yielding densely-packed layers of upright-standing molecules. If given the chance, 2HMCTPP could therefore be expected to displace the weaker-bonding ZnTPP molecules. However, if 2HMCTPP is deposited on top of a ZnTPP layer, a coadsorption structure instead forms, with the carboxylic-acid groups of the 2HCMTPP molecules bonding to titanium atoms of the surface exposed by gaps between the molecules in the flat-lying ZnTPP adsorption structure.

Ligand Many-Body Expansion as a General Approach for Accelerating Transition Metal Complex Discovery

Methods that accelerate the evaluation of molecular properties are essential for chemical discovery. While some degree of ligand additivity has been established for transition metal complexes, it is underutilized in asymmetric complexes, such as the square pyramidal coordination geometries highly relevant to catalysis. To develop predictive methods beyond simple additivity, we apply a many-body expansion to octahedral and square pyramidal complexes and introduce a correction based on adjacent ligands (i.e., the cis interaction model). We first test the cis interaction model on adiabatic spin-splitting energies of octahedral Fe(II) complexes, predicting DFT-calculated values of unseen binary complexes to within an average error of 1.4 kcal/mol. Uncertainty analysis reveals the optimal basis, comprising the homoleptic and mer symmetric complexes. We next show that the cis model (i.e., the cis interaction model solved for the optimal basis) infers both DFT- and CCSD(T)-calculated model catalytic reaction energies to within 1 kcal/mol on average. The cis model predicts low-symmetry complexes with reaction energies outside the range of binary complex reaction energies. We observe that trans interactions are unnecessary for most monodentate systems but can be important for some combinations of ligands, such as complexes containing a mixture of bidentate and monodentate ligands. Finally, we demonstrate that the cis model may be combined with Δ-learning to predict CCSD(T) reaction energies from exhaustively calculated DFT reaction energies and the same fraction of CCSD(T) reaction energies needed for the cis model, achieving around 30% of the error from using the CCSD(T) reaction energies in the cis model alone.

Stacking interactions in stabilizing supramolecular assembly of M[9C]2M complexes: dynamic stability with remarkable nonlinear optical features

Continual attempts have been made to discover excellent nonlinear optical (NLO) materials. Here, we investigate the role of stacking interactions and van der Waals forces in the designed parallel stacked complexes M[9C]2M (where M = Li, Na, K, Be, Mg, and Ca) using various quantum chemical and molecular dynamics methods. The thermodynamic stability of the present complexes is also revealed by the computed interaction energy, enthalpy of formation, and Gibbs free energy of formation (ΔGf). Molecular dynamics simulations were performed at room temperature to determine the stability of the dimer formation and their complexes. Alkali metals act as a more prominent source of excess electrons at long-range interaction distances. Charge decomposition analysis (CDA) and natural bonding orbital (NBO) analyses suggest excellent charge transfer in the alkalide complexes. In this series, Li[9C]2Li exhibits an excellent hyperpolarizability response up to 2.3 × 106 a.u., while Ca[9C]2Ca performs well in alkaline-earth metal complexes. The NLO response is mostly influenced by the alkalide and earthide characteristics. Dynamic NLO features were computed at externally applied frequencies. Scattering first hyperpolarizability (βHRS) and its associated components were also measured. The effect of solvents on hyperpolarizability is also considered. The quantum theory of atoms in molecules (QTAIM) and NCI are employed to investigate the bonding nature and vdW forces in addition to stacking interactions. TD-DFT and vibrational studies are also performed. We aim for this research to pave the way for the innovative strategies in designing supramolecular assemblies tailored for NLO applications.

Universal All-In-One Lateral Flow Immunoassay with Triple Signal Amplification for Ultrasensitive and Simple Self-Testing of Treponema pallidum Antibodies

Lateral flow immunoassay (LFIA) is valued for its simplicity and rapidity for on-site screening, however, it experienced false negatives in real sample analysis due to low sensitivity. Although many signal amplification techniques can improve the sensitivity, they usually require additional complicated steps. To address these issues, taking Treponema pallidum (T. pallidum) antibodies as a model detecting target, herein, we report an all-in-one LFIA (AIO-LFIA) with triple-step signal amplification to significantly improve sensitivity while maintaining simplicity. This LFIA utilizes a biotin-streptavidin system for initial signal amplification, followed by introducing a release controller with a specific imprinted structure for timed multicomponent release, which avoids the extra steps when adding components in traditional LFIA. Particularly, a 3D-printed programmed metal in situ growth (MISG) device is integrated to localize signal enhancement at specific sites, overcoming limitations of traditional MISG and substantially reducing reagent usage and assay time, and the nitrocellulose membrane surface was much cleaner than the conventional approach, which facilitates signal readout. After optimization, the proposed AIO-LFIA is capable of visual detection down to 1 pg/mLT. pallidum antibodies in 15 min, 1000-fold lower than the gold nanoparticle-based LFIA. In clinical testing of 152 samples, the AIO-LFIA can distinguish all positive samples, outperforming commercial LFIA which missed those positive samples with relatively low antibody levels. Thus, this study presents a universal ultrasensitive and reliable AIO-LFIA strategy for infectious diseases self-testing, providing an effective promising prospect to address the challenge over emerging infectious diseases in the future.

Hypoxia-Active Iridium(III) Bis-terpyridine Complexes Bearing Oligothienyl Substituents: Synthesis, Photophysics, and Phototoxicity toward Cancer Cells

In an effort to develop hypoxia-active iridium(III) complexes with long visible-light absorption, we synthesized and characterized five bis(terpyridine) Ir(III) complexes bearing oligothienyl substituents on one of the terpyridine ligands, i.e., nT-Ir (n = 0-4). The UV-vis absorption, emission, and transient absorption spectroscopy were employed to characterize the singlet and triplet excited states of these complexes and to explore the effects of varied number of thienyl units on the photophysical parameters of the complexes. In vitro photodynamic therapeutic activities of these complexes were assessed with respect to three melanoma cell lines (SKMEL28, A375, and B16F10) and two breast cancer cell lines (MDA-MB-231 and MCF-7) under normoxia (∼18.5% oxygen tension) and hypoxia (1% oxygen tension) upon broadband visible (400-700 nm), blue (453 nm), green (523 nm), and red (633 nm) light activation. It was revealed that the increased number of thienyl units bathochromically shifted the low-energy absorption bands to the green/orange spectral regions and the emission bands to the near-infrared (NIR) regions. The lowest triplet excited-state lifetimes and the singlet oxygen generation efficiency also increased from 0T to 2T substitution but decreased in 3T and 4T substitution. All complexes exhibited low dark cytotoxicity toward all cell lines, but 2T-Ir-4T-Ir manifested high photocytotoxicity for all cell lines upon visible, blue, and green light activation under normoxia, with 2T-Ir showing the strongest photocytotoxicity toward SKMEL28, MDA-MB-231, and MCF-7 cells, and 4T-Ir being the most photocytotoxic one for B16F10 and A375 cells. Singlet oxygen, superoxide anion radicals, and peroxynitrite anions were found to likely be involved in the photocytotoxicity exhibited by the complexes. 4T-Ir also showed strong photocytotoxicity upon red-light excitation toward all cell lines under normoxia and retained its photocytotoxicity under hypoxia toward all cell lines upon visible, blue, and green light excitation. The hypoxic activity of 4T-Ir along with its green to orange light absorption, NIR emission, and low dark cytotoxicity suggest its potential as a photosensitizer for photodynamic therapy applications.

Self-Assembly of four Ni16 Molecular Wheels with Capsule and Tubular Supramolecular Architectures

Four new Ni16 molecular wheels with the general formula [L4Ni16(RCOO)16(H2O)x(MeOH)12-x] (where H4L=1,4-bis((E)-((2'-hydroxybenzyl)imino)methyl)-2,3-naphthalenediol, and R=H or Me) have been isolated and structurally characterised. Complexes C1-C3 (R=Me) were formed using nickel (II) acetate and presented as polymorphs with the same formulation of charged components. The same wheel-like architecture was observed in C4 (R=H), which was prepared using nickel (II) formate, demonstrating the potential for further versatility of the system. In contrast to similar four-fold symmetric Ni(II) wheel clusters, measurements of the static magnetic properties of C1 indicated the presence of dominant antiferromagnetic interactions and an S=0 ground state.

Ancillary Ligand-Promoted Charge Transfer in Bis-indole Pyridine Ligand-Based Nickel Complexes

There is growing demand for the utilization of first-row transition metal complexes in light-driven processes instead of their conventional noble metal counterparts due to the greater sustainability of first-row transition metal complexes. However, their major drawback is the ultrafast lifetime of the electronic excited states of these first-row transition metal complexes, particularly those of d8 square-planar systems such as Ni(II) complexes, wherein low-lying metal-centered (MC) states provide the deactivation pathway. To increase the excited-state lifetime and broaden their applications, it is important to develop sterically bulky, strong field ligands with low-lying π* orbitals and a highly σ-donating nature to augment the energy of MC states. The current strategy relies on synthetically carbene-based ligands, which are substitutionally cumbersome and act as σ-donors only. In this work, we introduce a bis-indole pyridine (H2BIP) ligand framework, whose dianionic congener (BIP) demonstrates the ability to form stronger covalent bonds with a Ni(II) center compared to neutral donors like carbene and its effect on the complex to produce a less distorted excited-state structure. When conjoined with ancillary ligands such as pyridine or lutidine, the BIP ligand orchestrates the formation of low-energy 3CT states, which decay in ∼40 ps.

Visualizing Thermally Activated Conical Intersections Governing Non-Radiative Triplet Decay in a Ni(II) Porphyrin-Nanographene Conjugate with Variable Temperature Transient Absorption Spectroscopy

Metalloporphyrins based on open-shell transition metals, such as Ni(II), exhibit typically fast excited-state relaxation. In this work, we shed light into the nonradiative relaxation mechanism in a nanographene-Ni(II) porphyrin conjugate. Variable temperature transient absorption and global fit analysis are combined to produce a picture of the relaxation pathways. At room temperature, photoexcitation of the lowest π-π* transition is followed by vibrational cooling in 1.6 ps, setting a short 20 ps temporal window wherein a small fraction of relaxed singlets radiatively decay to the ground state before intersystem crossing proceeds. Following intersystem crossing, triplets relax rapidly to the ground state (S0) in a few tens of picoseconds. By performing measurements at low temperature, we provide evidence for a competition between two terminal relaxation pathways from the lowest (metal-centered) triplet to the ground state: a slow ground state relaxation process proceeding in time scales beyond 1.6 ns and a faster pathway dictated by a sloped conical intersection, which is thermally accessible at room temperature from the triplet state. The overall triplet decay at a given temperature is dictated by the interplay of these two contributions. This observation bears significance in understanding the underlying fast relaxation processes in Ni-based molecules and related transition metal complexes, opening avenues for potential applications for energy harvesting and optoelectronics.

Photocatalytic systems: reactions, mechanism, and applications

The photocatalytic field revolves around the utilization of photon energy to initiate various chemical reactions using non-adsorbing substrates, through processes such as single electron transfer, energy transfer, or atom transfer. The efficiency of this field depends on the capacity of a light-absorbing metal complex, organic molecule, or substance (commonly referred to as photocatalysts or PCs) to execute these processes. Photoredox techniques utilize photocatalysts, which possess the essential characteristic of functioning as both an oxidizing and a reducing agent upon activation. In addition, it is commonly observed that photocatalysts exhibit optimal performance when irradiated with low-energy light sources, while still retaining their catalytic activity under ambient temperatures. The implementation of photoredox catalysis has resuscitated an array of synthesis realms, including but not limited to radical chemistry and photochemistry, ultimately affording prospects for the development of the reactions. Also, photoredox catalysis is utilized to resolve numerous challenges encountered in medicinal chemistry, as well as natural product synthesis. Moreover, its applications extend across diverse domains encompassing organic chemistry and catalysis. The significance of photoredox catalysts is rooted in their utilization across various fields, including biomedicine, environmental pollution management, and water purification. Of course, recently, research has evaluated photocatalysts in terms of cost, recyclability, and pollution of some photocatalysts and dyes from an environmental point of view. According to these new studies, there is a need for critical studies and reviews on photocatalysts and photocatalytic processes to provide a solution to reduce these limitations. As a future perspective for research on photocatalysts, it is necessary to put the goals of researchers on studies to overcome the limitations of the application and efficiency of photocatalysts to promote their use on a large scale for the development of industrial activities. Given the significant implications of the subject matter, this review seeks to delve into the fundamental tenets of the photocatalyst domain and its associated practical use cases. This review endeavors to demonstrate the prospective of a powerful tool known as photochemical catalysis and elucidate its underlying tenets. Additionally, another goal of this review is to expound upon the various applications of photocatalysts.

Deciphering Photoinduced Catalytic Reaction Mechanisms in Natural and Artificial Photosynthetic Systems on Multiple Temporal and Spatial Scales Using X-ray Probes

Utilization of renewable energies for catalytically generating value-added chemicals is highly desirable in this era of rising energy demands and climate change impacts. Artificial photosynthetic systems or photocatalysts utilize light to convert abundant CO2, H2O, and O2 to fuels, such as carbohydrates and hydrogen, thus converting light energy to storable chemical resources. The emergence of intense X-ray pulses from synchrotrons, ultrafast X-ray pulses from X-ray free electron lasers, and table-top laser-driven sources over the past decades opens new frontiers in deciphering photoinduced catalytic reaction mechanisms on the multiple temporal and spatial scales. Operando X-ray spectroscopic methods offer a new set of electronic transitions in probing the oxidation states, coordinating geometry, and spin states of the metal catalytic center and photosensitizers with unprecedented energy and time resolution. Operando X-ray scattering methods enable previously elusive reaction steps to be characterized on different length scales and time scales. The methodological progress and their application examples collected in this review will offer a glimpse into the accomplishments and current state in deciphering reaction mechanisms for both natural and synthetic systems. Looking forward, there are still many challenges and opportunities at the frontier of catalytic research that will require further advancement of the characterization techniques.

Luminescent Ruthenium-Terpyridine Complexes Coupled with Stilbene-Appended Naphthalene, Anthracene, and Pyrene Motifs Demonstrate Fluoride Ion Sensing and Reversible Trans-Cis Photoisomerization

A new family of luminescent heteroleptic Ru(II)-terpyridine complexes coupled with stilbene-appended naphthalene, anthracene, and pyrene motifs is reported. Each of the complexes features moderately intense emission at room temperature having a lifetime of 16.7 ns for naphthalene and 11.4 ns for anthracene, while a substantially elevated lifetime of 8.3 μs was observed for the pyrene derivative. All the three complexes display a reversible couple in the positive potential window due to Ru2+/Ru3+ oxidation but multiple reversible and/or quasi-reversible peaks in the negative potential domain because of the reduction of the terpyridine moieties. All the complexes selectively sense F- among the studied anions via the intermediary of different noncovalent interactions. The interaction event is monitored through absorption, emission, and 1H and 19F NMR spectroscopy. Additionally, upon utilizing the stilbene motif, reversible trans-cis isomerization of the complexes has been undertaken upon alternate treatment of visible and UV light so that the complexes can act as potential photomolecular switches. We also carried out the anion sensing characterization of the cis form of the complexes. Theoretical calculation employing density functional theory is also executed for a selective complex (naphthalene derivative) to elucidate different noncovalent interactions that are operative during the complex-fluoride interplay.

Directional multiobjective optimization of metal complexes at the billion-system scale

The discovery of transition metal complexes (TMCs) with optimal properties requires large ligand libraries and efficient multiobjective optimization algorithms. Here we provide the tmQMg-L library, containing 30k diverse and synthesizable ligands with robustly assigned charges and metal coordination modes. tmQMg-L enabled the generation of 1.37 million palladium TMCs, which were used to develop and benchmark the Pareto-Lighthouse multiobjective genetic algorithm (PL-MOGA). With fine control over aim and scope, this algorithm maximized both the polarizability and highest occupied molecular orbital-lowest unoccupied molecular orbital gap of the TMCs within selected regions of the Pareto front, without requiring prior knowledge on the objective limits. Instead of genetic operations on small ligand fragments, the PL-MOGA did whole-ligand mutation and crossover operations, which in chemical spaces containing billions of systems, yielded thousands of highly diverse TMCs in an interpretable manner.

Atomic Dynamics of Multi-Interfacial Migration and Transformations

Redox-induced interconversions of metal oxidation states typically result in multiple phase boundaries that separate chemically and structurally distinct oxides and suboxides. Directly probing such multi-interfacial reactions is challenging because of the difficulty in simultaneously resolving the multiple reaction fronts at the atomic scale. Using the example of CuO reduction in H2 gas, a reaction pathway of CuO → monoclinic m-Cu4 O3 → Cu2 O is demonstrated and identifies interfacial reaction fronts at the atomic scale, where the Cu2 O/m-Cu4 O3 interface shows a diffuse-type interfacial transformation; while the lateral flow of interfacial ledges appears to control the m-Cu4 O3 /CuO transformation. Together with atomistic modeling, it is shown that such a multi-interface transformation results from the surface-reaction-induced formation of oxygen vacancies that diffuse into deeper atomic layers, thereby resulting in the formation of the lower oxides of Cu2 O and m-Cu4 O3 , and activate the interfacial transformations. These results demonstrate the lively dynamics at the reaction fronts of the multiple interfaces and have substantial implications for controlling the microstructure and interphase boundaries by coupling the interplay between the surface reaction dynamics and the resulting mass transport and phase evolution in the subsurface and bulk.

Design Strategies for Luminescent Titanocenes: Improving the Photoluminescence and Photostability of Arylethynyltitanocenes

Complexes that undergo ligand-to-metal charge transfer (LMCT) to d0 metals are of interest as possible photocatalysts. Cp2Ti(C2Ph)2 (where C2Ph = phenylethynyl) was reported to be weakly emissive in room-temperature (RT) fluid solution from its phenylethynyl-to-Ti 3LMCT state but readily photodecomposes. Coordination of CuX between the alkyne ligands to give Cp2Ti(C2Ph)2CuX (X = Cl, Br) has been shown to significantly increase the photostability, but such complexes are not emissive in RT solution. Herein, we investigate whether inhibition of alkyne-Ti-alkyne bond compression might be responsible for the increased photostability of the CuX complexes by investigating the decomposition of a structurally constrained analogue, Cp2Ti(OBET) (OBET = o-bis(ethynyl)tolane). To investigate the mechanism of nonradiative decay from the 3LMCT states in Cp2Ti(C2Ph)2CuX, the photophysical properties were investigated both upon deuteration and upon rigidifying in a poly(methyl methacrylate) film. These investigations suggested that inhibition of structural rearrangement may play a dominant role in increasing emission lifetimes and quantum yields. The bulkier Cp*2Ti(C2Ph)2CuBr was prepared and is emissive at 693 nm in RT THF solution with a photoluminescent quantum yield of 1.3 × 10-3 (τ = 0.18 μs). Time-dependent density functional theory (TDDFT) calculations suggest that emission occurs from a 3LMCT state dominated by Cp*-to-Ti charge transfer.

Structure-directing role of CH⋯X (X = C, N, S, Cl) interactions in three ionic cobalt complexes: X-ray investigation and DFT study using QTAIM Vr predictor to eliminate the effect of pure Coulombic forces

Three cobalt complexes, namely [CoIII(HL1)2(N3)2]ClO4 (1), [CoIII(L2)(HL2)(N3)]ClO4·1.5H2O (2), and [CoIII(L3)(HL3)(NCS)]2 [CoIICl2(NCS)2] (3), where HL1 = 2-(3-(dimethylamino)propyliminomethyl)-6-methoxyphenol, HL2 = 2-(2-(dimethylamino)ethyliminomethyl)-4,6-dichlorophenol, and HL3 = 2-(2-(dimethylamino)ethyliminomethyl)-6-methoxyphenol, as potential tridentate N2O-donor Schiff base ligands, were synthesized and characterized using elemental analysis, IR and UV-vis spectroscopy, and single-crystal X-ray diffraction studies. All three were found to be monomeric ionic complexes. Complex 1 crystallizes in the orthorhombic space group Pbcn, whereas both complexes 2 and 3 crystallize in triclinic space groups, P1̄. Further, 1 and 2 are cationic complexes of octahedral cobalt(iii) with perchlorate anions, whereas complex 3 contains a cationic part of octahedral cobalt(iii) and an anionic part of tetrahedral cobalt(ii). Hydrogen-bonding interactions involving aromatic and aliphatic CH bonds as H-bond donors and the pseudo-halide co-ligands as H-bond acceptors were established, which are important aspects governing the X-ray packing. These interactions were analyzed theoretically using the quantum theory of atoms in molecules (QTAIM) and non-covalent interaction plot (NCI plot) analyses. Moreover, energy decomposition analysis (EDA) was performed to analyze the stabilization of the complexes in terms of the electrostatic, dispersion, and correlation forces.

Influences of Both N,N,N- and N,N,C-Coordination Modes of Tolyl-terpyridine on the Photophysical Properties of Cyclometalated Ru(II) Complexes: Combined Experimental and Theoretical Investigations on Acid/Base-Dependent Reversible Cyclometalation

With the goal of developing a new strategy for the synthesis of luminescent Ru(II) complexes, we have prepared herein a new set of bis-tridentate complexes of the type [(py-bpy-Ph-X)Ru(tpy-PhCH3)]ClO4 (X = -CH3, -CH2Br, and -CHO) incorporating both non-cyclometalated and cyclometalated coordination motifs of two isomeric forms of methylphenyl-terpyridine (tpy-PhCH3). Thorough characterization of the synthesized complexes is carried out using standard analytical tools and single crystal X-ray diffraction. Detailed investigations on their photophysical and electrochemical behaviors are carried out in MeCN. The presence of a carbanionic center in the cyclometalating unit increases the absorption spectral window of the complexes into a longer-wavelength region. The complexes also exhibit room-temperature luminescence in the NIR domain with enhanced excited-state lifetimes (up to 20.1 ns) compared to their non-cyclometalated counterpart, [Ru(tpy-PhCH3)2]2+. In the presence of acid, the non-coordinated nitrogen atom in the secondary coordination sphere of the complexes allows fine-tuning of the absorption and emission spectral properties. Excess acid induces de-coordination of the Ru-C bond, which is signaled by a remarkable alteration of their spectral profiles. Cleavage of the Ru-C bond is also possible upon treating the acidified solution of the complexes with visible light. Restoration of the Ru-C bond is again feasible upon treating the solution with base at an elevated temperature (∼70 °C). In essence, "on-off" and "off-on" switching of emission is facilitated upon alternating treatment of the Ru(II) complexes with acid, base, and temperature. DFT and TD-DFT calculations are also performed for assignments of the spectral bands as well as to understand structural changes associated with the switching behaviors of the complexes.

A Comparative XPS, UV PES, NEXAFS, and DFT Study of the Electronic Structure of the Salen Ligand in the H2(Salen) Molecule and the [Ni(Salen)] Complex

A comparative study of the electronic structure of the salen ligand in the H₂(Salen) molecule and the [Ni(Salen)] complex was performed using the experimental methods of XPS, UV PES, and NEXAFS spectroscopy along with DFT calculations. Significant chemical shifts of +1.0 eV (carbon), +1.9 eV (nitrogen), and -0.4 eV (oxygen) were observed in the 1s PE spectra of the salen ligand atoms when passing from a molecule to a complex, unambiguously indicating a substantial redistribution of the valence electron density between these atoms. It is proposed that the electron density transfer to the O atoms in [Ni(Salen)] occurred not only from the Ni atom, but also from the N and C atoms. This process seemed to be realized through the delocalized conjugated π-system of the phenol C 2p electronic states of the ligand molecule. The DFT calculations (total and partial DOS) for the valence band H₂(Salen) and [Ni(Salen)] described well the spectral shape of the UV PE spectra of both compounds and confirmed their experimental identification. An analysis of the N and O 1s NEXAFS spectra clearly indicated that the atomic structure of the ethylenediamine and phenol fragments was retained upon passing from the free salen ligand to the nickel complex.

Non-Phenomenological Description of the Time-Resolved Emission in Solution with Quantum-Classical Vibronic Approaches-Application to Coumarin C153 in Methanol

We report a joint experimental and theoretical work on the steady-state spectroscopy and time-resolved emission of the coumarin C153 dye in methanol. The lowest energy excited state of this molecule is characterized by an intramolecular charge transfer thus leading to remarkable shifts of the time-resolved emission spectra, dictated by the methanol reorganization dynamics. We selected this system as a prototypical test case for the first application of a novel computational protocol aimed at the prediction of transient emission spectral shapes, including both vibronic and solvent effects, without applying any phenomenological broadening. It combines a recently developed quantum-classical approach, the adiabatic molecular dynamics generalized vertical Hessian method (Ad-MD|gVH), with nonequilibrium molecular dynamics simulations. For the steady-state spectra we show that the Ad-MD|gVH approach is able to reproduce quite accurately the spectral shapes and the Stokes shift, while a ∼0.15 eV error is found on the prediction of the solvent shift going from gas phase to methanol. The spectral shape of the time-resolved emission signals is, overall, well reproduced, although the simulated spectra are slightly too broad and asymmetric at low energies with respect to experiments. As far as the spectral shift is concerned, the calculated spectra from 4 ps to 100 ps are in excellent agreement with experiments, correctly predicting the end of the solvent reorganization after about 20 ps. On the other hand, before 4 ps solvent dynamics is predicted to be too fast in the simulations and, in the sub-ps timescale, the uncertainty due to the experimental time resolution (300 fs) makes the comparison less straightforward. Finally, analysis of the reorganization of the first solvation shell surrounding the excited solute, based on atomic radial distribution functions and orientational correlations, indicates a fast solvent response (≈100 fs) characterized by the strengthening of the carbonyl-methanol hydrogen bond interactions, followed by the solvent reorientation, occurring on the ps timescale, to maximize local dipolar interactions.

Excited state processes of dinuclear Pt(II) complexes bridged by 8-hydroxyquinoline

Dinuclear d⁸ Pt(II) complexes, where two mononuclear square planar Pt(II) units are bridged in an "A-frame" geometry, possess photophysical properties characterised by either metal-to-ligand-(MLCT) or metal-metal-ligand-to-ligand charge transfer (MMLCT) transitions determined by the distance between the two Pt(II) centres. When using 8-hydroxyquinoline (8HQH) as the bridging ligand to construct novel dinuclear complexes with general formula [C^NPt(μ-8HQ)]₂, where C^N is either 2-phenylpyridine (1) or 7,8-benzoquinoline (2), triplet ligand-centered (³LC) photophysics results echoing that in a mononuclear model chromophore, [Pt(8HQ)₂] (3). The lengthened Pt-Pt distances of 3.255 Å (1) and 3.243 Å (2) results in a lowest energy absorption centred around 480 nm assigned as having mixed LC/MLCT character by TD-DFT, mirroring the visible absorption spectrum of 3. Additionally, 1 and 2 exhibit ³LC photoluminescence with limited quantum yields (0.008) from broad transitions centred near 680 nm. Photoexcitation of 1-3 leads to an initially prepared excited state that relaxes within 15 ps to a ³LC excited state centred on the 8HQ bridge, which then persists for several microseconds. All the experimental results correspond well with DFT electronic structure calculations.

Nanoscale chemical analysis of 2D molecular materials using tip-enhanced Raman spectroscopy

Two-dimensional (2D) molecular materials have attracted immense attention due to their unique properties, promising a wide range of exciting applications. To understand the structure-property relationship of these low-dimensional materials, sensitive analytical tools capable of providing structural and chemical characterisation at the nanoscale are required. However, most conventional analytical techniques fail to meet this challenge, especially in a label-free and non-destructive manner under ambient conditions. In the last two decades, tip-enhanced Raman spectroscopy (TERS) has emerged as a powerful analytical technique for nanoscale chemical characterisation by combining the high spatial resolution of scanning probe microscopy and the chemical sensitivity and specificity of surface-enhanced Raman spectroscopy. In this review article, we provide an overview of the application of TERS for nanoscale chemical analysis of 2D molecular materials, including 2D polymers, biomimetic lipid membranes, biological cell membranes, and 2D reactive systems. The progress in the structural and chemical characterisation of these 2D materials is demonstrated with key examples from our as well as other laboratories. We highlight the unique information that TERS can provide as well as point out the common pitfalls in experimental work and data interpretation and the possible ways of averting them.

Tris-decorated multi-iron polyoxotungstates

Solution-stable tris(hydroxymethyl)aminomethane-functionalized Fe^III-containing polyoxotungstates exhibit an unusual anchoring mode of triol moieties, with one -NH₂ and one -CH₂OH group remaining accessible for post-functionalization or chemisorption. The redox-active title compounds have been isolated under unusually mild reaction conditions and characterized in the solid state and in aqueous solutions.

Visible to Mid-IR Spectromicroscopy with Top-Down Illumination and Nanoscale (≈10 nm) Resolution

Photothermal induced resonance (PTIR), an atomic force microscopy (AFM) analogue of IR spectroscopy also known as AFM-IR, is capable of nanoscale lateral resolution and finds broad applications in biology and materials science. Here, the spectral range of a top-illumination PTIR setup operating in contact-mode is expanded for the first time to the visible and near-IR spectral ranges. The result is a tool that yields absorption spectra and maps of electronic and vibrational features with spatial resolution down to ≈10 nm. In addition to the improved resolution, the setup enables light-polarization-dependent PTIR experiments in the visible and near-IR ranges for the first time. While previous PTIR implementations in the visible used total internal reflection illumination requiring challenging sample preparations on an optically transparent prism, the top illumination used here greatly simplifies sample preparation and will foster a broad application of this method.

Tin Sulfide (SnS) Films Deposited by an Electric Field-Assisted Continuous Spray Pyrolysis Technique with Application as Counter Electrodes in Dye-Sensitized Solar Cells

The deposition of tin sulfide (SnS) nanostructured films using a continuous spray pyrolysis technique is reported with an electric field present at the nozzle for influencing the atomization and the subsequent film deposition. In the absence of the electric field, the X-ray diffraction pattern shows the orthorhombic phase of SnS with a crystallographic preferred orientation along the (040) plane. The application of the electric field results in significant improvement in the morphology and a reduction in surface roughness (28 nm from 37 nm). The direct optical band gap of the films deposited with and without the electric field is estimated to be 1.5 and 1.7 eV, respectively. The photothermal deflection spectroscopy studies show a lower energetic disorder (no Urbach tail), which indicates an annealing effect in the SnS films deposited under the electric field. The improvement in the film properties is reflected in the expected improvement in the power conversion efficiency (PCE) of dye-sensitized solar cells fabricated using the SnS film as a counter electrode. An enhancement of PCE from 2.07% for the film deposited without the electric field to 2.89% for the film deposited with the electric field shows the role of the electric field in the fabrication of improved SnS films.

Synthesis and Photophysics Characterization of Boronic Styril and Distyryl BODIPYs for Water-Based Dye-Sensitized Solar Cells

In this study, two boronic acid BODIPYs are obtained through a microwave-assisted Knoevenagel reaction. The aim is to use them for the first time as dyes in a photosensitized solar cell (DSSC) to mimic chlorophyll photosynthesis, harvesting solar light and converting it into electricity. The microwave-assisted Knoevenagel reaction is a straightforward approach to extending the molecular conjugation of the dye and is applied for the first time to synthesize BODIPY’s boronic acid derivatives. These derivatives have proved to be very useful for covalent deposition on titania. This work studies the photo-physical and electrochemical properties. Moreover, the photovoltaic performances of these two new dyes as sensitizers for DSSC are discussed. Experimental data show that both dyes exhibit photosensitizing activities in acetonitrile and water. In particular, in all the experiments, distyryl BODIPY was more efficient than styryl BODIPY. In this study, demonstrating the use of a natural component as a water-based electrolyte for boronic BODIPY sensitizers, we open new possibilities for the development of water-based solar cells.

Heteroleptic Cu(I) bis-diimine complexes as sensitizers in dye-sensitized solar cells (DSSCs): on some factors affecting intramolecular charge transfer

A set of eight heteroleptic bis-diimine copper dye complexes with two different ancillary ligands (functionalised 2,9-dimethyl-1,10-phenanthroline (dmp) and functionalised 6,6'-diphenyl-2,2'-bipyridine (dpbpy)) are investigated for their potential use as sensitizers in dye-sensitized solar cells (DSSCs), using first principles density functional theory (DFT) and time dependent DFT (TDDFT). A detailed analysis of the structural properties, projected density of electronic states and Kohn-Sham energy levels, and optical absorption spectra in the UV-visible region reveals that substituting the thiophene group in the ancillary ligand, and enhancing conjugation in the anchoring ligand, lead to increase in the light harvesting efficiency (LHE). However, a natural transition orbital (NTO) analysis, shows that the nature of charge transfer depends mainly on the nature of the parent ancillary group and is not significantly affected by the structural modifications. Importantly, the lower energy excitations lead to favourable mixed metal to ligand charge transfer (MLCT) and ligand to ligand charge transfer (LLCT), as well as good electron injection. The best charge transfer directionality is found in the dmp-based dyes, particularly thiophene substituted dyes, thus making these the more effective sensitizers in DSSCs.

Optically Transparent Gold Nanoparticles for DSSC Counter-Electrode: An Electrochemical Characterization

A gold nanoparticles transparent electrode was realized by chemical reduction. This work aims to compare the transparent gold nanoparticles electrode with a more commonly utilized gold-film-coated electrode in order to investigate its potential use as counter-electrode (CE) in dye-sensitized solar cells (DSSCs). A series of DSSC devices, utilizing I⁻/I³⁻ and Co(III)/(II) polypyridine redox mediators [Co(dtb)3]³⁺/²⁺; dtb = 4,4′ditert-butyl-2,2′-bipyridine)], were evaluated. The investigation focused firstly on the structural characterization of the deposited gold layers and then on the electrochemical study. The novelty of the work is the realization of a gold nanoparticles CE that reached 80% of average visible transmittance. We finally examined the performance of the transparent gold nanoparticles CE in DSSC devices. A maximum power conversion efficiency (PCE) of 4.56% was obtained with a commercial I⁻/I³⁻-based electrolyte, while a maximum 3.1% of PCE was obtained with the homemade Co-based electrolyte.

Ultrafast branching in intersystem crossing dynamics revealed by coherent vibrational wavepacket motions in a bimetallic Pt(II) complex

Ultrafast excited state processes of transition metal complexes (TMCs) are governed by complicated interplays between electronic and nuclear dynamics, which demand a detailed understanding to achieve optimal functionalities of photoactive TMC-based materials for many applications. In this work, we investigated a cyclometalated platinum(II) dimer known to undergo a Pt-Pt bond contraction in the metal-metal-to-ligand-charge-transfer (MMLCT) excited state using femtosecond broadband transient absorption (fs-BBTA) spectroscopy in combination with geometry optimization and normal mode calculations. Using a sub-20 fs pump and broadband probe pulses in fs-BBTA spectroscopy, we were able to correlate the coherent vibrational wavepacket (CVWP) evolution with the stimulated emission (SE) dynamics of the ¹MMLCT state. The results demonstrated that the 145 cm^-1 CVWP motions with the damping times of ∼0.9 ps and ∼2 ps originate from coherent Pt-Pt stretching vibrations in the singlet and triplet MMLCT states, respectively. On the basis of excited state potential energy surface calculations in our previous work, we rationalized that the CVWP transfer from the Franck-Condon (FC) state to the ³MMLCT state was mediated by a triplet ligand-centered (³LC) intermediate state through two step intersystem crossing (ISC) on a time scale shorter than a period of the Pt-Pt stretching wavepacket motions. Moreover, it was found that the CVWP motion had 110 cm^-1 frequency decays with the damping time of ∼0.2 ps, matching the time constant of 0.253 ps, corresponding to a redshift in the SE feature at early times. This observation indicates that the Pt-Pt bond contraction changes the stretching frequency from 110 to 145 cm^-1 and stabilizes the ¹MMLCT state relative to the ³LC state with a ∼0.2 ps time scale. Thus, the ultrafast ISC from the ¹MMLCT to the ³LC states occurs before the Pt-Pt bond shortening. The findings herein provide insight into understanding the impact of Pt-Pt bond contraction on the ultrafast branching of the ¹MMLCT population into the direct (¹MMLCT → ³MMLCT) and indirect ISC pathways (¹MMLCT → ³LC → ³MMLCT) in the Pt(II) dimer. These results revealed intricate excited state electronic and nuclear motions that could steer the reaction pathways with a level of detail that has not been achieved before.

Thermally activated delayed fluorescence in luminescent cationic copper(i) complexes

In this work, the photophysical characteristics of [Cu(N^N)2]+ and [Cu(N^N)(P^P)]+ complexes were described. The concept of thermally activated delayed fluorescence (TADF) and its development throughout the years was also explained. The importance of ΔE (S1-T1) and spin-orbital coupling (SOC) values on the TADF behavior of [Cu(N^N)2]+ and [Cu(N^N)(P^P)]+ complexes is discussed. Examples of ΔE (S1-T1) values reported in the literature were collected and some trends were proposed (e.g. the effect of the substituents at the 2,9 positions of the phenanthroline ligand). Besides, the techniques (or calculation methods) used for determining ΔE (S1-T1) values were described. The effect of SOC in TADF was also discussed, and examples of the determination of SOC values by DFT and TD-DFT calculations are provided. The last chapter covers the applications of [Cu(N^N)2]+ and [Cu(N^N)(P^P)]+ TADF complexes and the challenges that are still needed to be addressed to ensure the industrial applications of these compounds.

Optimization of Surface Loading of the Silatrane Anchoring Group on TiO2

Anchoring groups are usually needed for the attachment of small molecules to metal oxide surfaces such as in water-splitting dye-sensitized photoelectrochemical cells (WS-DSPECs). Here, we optimize the surface loading onto titanium dioxide surfaces of the silatrane anchoring group, a triethanolamine-protected trialkoxysilane. This anchoring group is not yet widely used because prior protocols afforded low surface coverage, but it has the advantage of high stability over a wide pH range and at both oxidizing and reducing potentials when bound. A new and improved method for estimating surface coverage is described here and used to determine that loading using previously reported binding protocols is very low. However, we were able to uncover several factors contributing to this low loading, which has allowed us to develop methods to greatly improve surface coverage for a variety of silatranes. Most notably, we were able to increase the loading of a model arylsilatrane by 145% through use of a benzoic acid additive. This is not general acid catalysis because alkylsilatranes are not similarly affected and 4-t-butylbenzoic acid, having a similar pK_a to benzoic acid, is not effective. Because the bulky t-butyl group of the latter additive is not expected to pi-stack with our arylsilatrane, we have tentatively assigned this enhancement to aromatic stacking between the aromatic additive and the arylsilatrane.

Nanostructure Shape-Effects in ZnO heterogeneous photocatalysis

Selective oxidation of alcohols is an essential reaction for fine chemical production. Here, the photocatalytic oxidation of benzyl alcohol by zinc oxide (ZnO) nanocrystals was investigated to clarify the mechanism of selective oxidation with this process. Reactivity when in contact with three distinct ZnO nanocrystal shapes: nanocones, nanorods and nanoplates, was studied in order to compare crystal facet-specific effects in the reaction system. The same non-hydrothermal and non-hydrolytic aminolysis method was used to synthesise all three nanocrystal shapes. The ZnO catalysts were characterized using by a range of techniques to establish the key properties of the prominent ZnO crystal facets exposed to the reaction medium. The ZnO nanocrystals photocatalysed the benzyl alcohol oxidation reaction when irradiated by a 370 - 375 nm LED output and each ZnO crystal morphology exhibited different reaction kinetics for the oxidation reaction. ZnO nanocones displayed the highest benzyl alcohol conversion rate while nanorods gave the lowest. This established a facet-dependent kinetic activity for the benzyl alcohol reaction of (101¯1) > (0001) > (101¯0). Experimental and density functional theory computation results confirm that the {101¯1} facet is a surface that exposes undercoordinated O atoms to the reaction medium, which explains why the reactant benzyl alcohol adsorption on this facet is the highest. Light irradiation can excite valence band electrons to the conduction band, which are then captured by O₂ molecules to yield superoxide (O₂^•-). In a non-aqueous solvent, the photogenerated holes oxidise benzyl alcohol to form a radical species, which reacts with O₂^•- to yield benzaldehyde. This results in 100% product selectivity for benzaldehyde, rather than the carboxylic acid derivative.

Bioinspired Artificial Photosynthetic Systems

Mimicking photosynthesis using artificial systems, as a means for solar energy conversion and green fuel generation, is one of the holy grails of modern science. This perspective presents recent advances towards developing artificial photosynthetic systems. In one approach, native photosystems are interfaced with electrodes to yield photobioelectrochemical cells that transform light energy into electrical power. This is exemplified by interfacing photosystem I (PSI) and photosystem II (PSII) as an electrically contacted assembly mimicking the native Z-scheme, and by the assembly of an electrically wired PSI/glucose oxidase biocatalytic conjugate on an electrode support. Illumination of the functionalized electrodes led to light-induced generation of electrical power, or to the generation of photocurrents using glucose as the fuel. The second approach introduces supramolecular photosensitizer nucleic acid/electron acceptor complexes as functional modules for effective photoinduced electron transfer stimulating the subsequent biocatalyzed generation of NADPH or the Pt-nanoparticle-catalyzed evolution of molecular hydrogen. Application of the DNA machineries for scaling-up the photosystems is demonstrated. A third approach presents the integration of artificial photosynthetic modules into dynamic nucleic acid networks undergoing reversible reconfiguration or dissipative transient operation in the presence of auxiliary triggers. Control over photoinduced electron transfer reactions and photosynthetic transformations by means of the dynamic networks is demonstrated.

Dipyridylmethane Ethers as Ligands for Luminescent Ir Complexes

This work reports two new cationic heteroleptic cyclometalated iridium complexes, containing ether derivatives of di(pyridin-2-yl)methanol. The new ligands are based on dipyridin-2-ylmethane and are designed to obtain ether-based intermediates with extended electronic conjugation by insertion of π system such as phenyl, allyl and ethynyl. Different synthetic strategies were employed to introduce these units, as molecular wires, between the dipyridin-2-ylmethane chelating portion and the terminal N-containing functional group, such as amine and carbamide. The corresponding complexes show luminescence in the blue region of the spectrum, lifetimes between 0.6 and 2.1 μs, high quantum yield and good electrochemical behavior. The computational description (DFT) of the electronic structure highlights the key role of the conjugated π systems on optical and electrochemical properties of the final products.

Charge Carrier Screening in Photoexcited Epitaxial Semiconductor Nanorods Revealed by Transient X-ray Absorption Linear Dichroism

Understanding the electronic structure and dynamics of semiconducting nanomaterials at the atomic level is crucial for the realization and optimization of devices in solar energy, catalysis, and optoelectronic applications. We report here on the use of ultrafast X-ray linear dichroism spectroscopy to monitor the carrier dynamics in epitaxial ZnO nanorods after band gap photoexcitation. By rigorously subtracting out thermal contributions and conducting ab initio calculations, we reveal an overall depletion of absorption cross sections in the transient X-ray spectra caused by photogenerated charge carriers screening the core-hole potential of the X-ray absorbing atom. At low laser excitation densities, we observe phase-space filling by excited electrons and holes separately. These results pave the way for carrier- and element-specific probing of charge transfer dynamics across heterostructured interfaces with ultrafast table-top and fourth-generation X-ray sources.

Metallaphotoredox: The Merger of Photoredox and Transition Metal Catalysis

The merger of photoredox catalysis with transition metal catalysis, termed metallaphotoredox catalysis, has become a mainstay in synthetic methodology over the past decade. Metallaphotoredox catalysis has combined the unparalleled capacity of transition metal catalysis for bond formation with the broad utility of photoinduced electron- and energy-transfer processes. Photocatalytic substrate activation has allowed the engagement of simple starting materials in metal-mediated bond-forming processes. Moreover, electron or energy transfer directly with key organometallic intermediates has provided novel activation modes entirely complementary to traditional catalytic platforms. This Review details and contextualizes the advancements in molecule construction brought forth by metallaphotocatalysis.