Sequential mechanism of calcium binding and translocation in sarcoplasmic reticulum adenosine triphosphatase

Calcium regulation by SERC-A before and during Alzheimer disease

There are many factors involved in the incidence of Alzheimer’s disease that, in combination, impede or hinder normal neuronal functions. Little is currently known about calcium regulation before and during the disease. Internal instability of calcium levels is associated with increased vascular risk, a prevalent condition in a high number of individuals already compromised by Alzheimer’s disease. This review provides a reevaluation of the molecular mechanism of the sarcoendoplasmic reticulum calcium ATPase (SERC-A) in the disease and discusses salient aspects of voltage-gated calcium channel function; in these way new alternatives could be open for its treatment. These regulation mechanisms are clinically relevant since the irregular functions of SERC+A has been implicated in pathologies of brain function.

Acquired disorders of mitochondrial metabolism and dynamics in pulmonary arterial hypertension

Pulmonary arterial hypertension (PAH) is an orphan disease of the cardiopulmonary unit that reflects an obstructive pulmonary vasculopathy and presents with hypertrophy, inflammation, fibrosis, and ultimately failure of the right ventricle (RVF). Despite treatment using pulmonary hypertension (PH)-targeted therapies, persistent functional impairment reduces the quality of life for people with PAH and death from RVF occurs in approximately 40% of patients within 5 years of diagnosis. PH-targeted therapeutics are primarily vasodilators and none, alone or in combination, are curative. This highlights a need to therapeutically explore molecular targets in other pathways that are involved in the pathogenesis of PAH. Several candidate pathways in PAH involve acquired mitochondrial dysfunction. These mitochondrial disorders include: 1) a shift in metabolism related to increased expression of pyruvate dehydrogenase kinase and pyruvate kinase, which together increase uncoupled glycolysis (Warburg metabolism); 2) disruption of oxygen-sensing related to increased expression of hypoxia-inducible factor 1α, resulting in a state of pseudohypoxia; 3) altered mitochondrial calcium homeostasis related to impaired function of the mitochondrial calcium uniporter complex, which elevates cytosolic calcium and reduces intramitochondrial calcium; and 4) abnormal mitochondrial dynamics related to increased expression of dynamin-related protein 1 and its binding partners, such as mitochondrial dynamics proteins of 49 kDa and 51 kDa, and depressed expression of mitofusin 2, resulting in increased mitotic fission. These acquired mitochondrial abnormalities increase proliferation and impair apoptosis in most pulmonary vascular cells (including endothelial cells, smooth muscle cells and fibroblasts). In the RV, Warburg metabolism and induction of glutaminolysis impairs bioenergetics and promotes hypokinesis, hypertrophy, and fibrosis. This review will explore our current knowledge of the causes and consequences of disordered mitochondrial function in PAH.

Proton Countertransport and Coupled Gating in the Sarcoplasmic Reticulum Calcium Pump

The calcium pump of the sarcoplasmic reticulum (SERCA) is an ATP-driven active transporter of Ca²⁺ ions that functions via an "alternating-access" cycle mechanism. In each cycle, SERCA transports two Ca²⁺ ions toward the lumen of the sarcoplasmic reticulum and two to three protons to the cytoplasm. How the latter conformational transition is coupled to cytoplasmic release of protons remains poorly understood. The present computational study shows how the mechanism of proton countertransport is coupled to the alternating access gating process in SERCA. Molecular dynamics simulation trajectories are generated starting from a series of configurations taken along the E2 to E1 transition pathway determined by the string method with swarms-of-trajectories. Simulations of different protonation configurations at the binding sites reveal how deprotonation events affect the opening of the cytoplasmic gate. The results show that there is a strong coupling between the chronological order of deprotonation, the entry of water molecules into the TM region, and the opening of the cytoplasmic gate. Deprotonation of E309 and E771 is sequential with E309 being the first to lose the proton. The deprotonation promotes the opening of the cytoplasmic gate but leads to a productive gating transition only if it occurs after the transmembrane domain has reached an intermediate conformation. Deprotonation of E309 and E771 is unproductive when it occurs too early because it causes the re-opening of the luminal gate.

Conformational Transitions and Alternating-Access Mechanism in the Sarcoplasmic Reticulum Calcium Pump

Ion pumps are integral membrane proteins responsible for transporting ions against concentration gradients across biological membranes. Sarco/endoplasmic reticulum Ca2+-ATPase (SERCA), a member of the P-type ATPases family, transports two calcium ions per hydrolyzed ATP molecule via an "alternating-access" mechanism. High-resolution crystallographic structures provide invaluable insight on the structural mechanism of the ion pumping process. However, to understand the molecular details of how ATP hydrolysis is coupled to calcium transport, it is necessary to gain knowledge about the conformational transition pathways connecting the crystallographically resolved conformations. Large-scale transitions in SERCA occur at time-scales beyond the current reach of unbiased molecular dynamics simulations. Here, we overcome this challenge by employing the string method, which represents a transition pathway as a chainofstates linking two conformational endpoints. Using a multiscale methodology, we have determined all-atom transition pathways for three main conformational transitions responsible for the alternating-access mechanism. The present pathways provide a clear chronology and ordering of the key events underlying the active transport of calcium ions by SERCA. Important conclusions are that the conformational transition that leads to occlusion with bound ATP and calcium is highly concerted and cooperative, the phosphorylation of Asp351 causes areorganization of the cytoplasmic domains that subsequently drives the opening of the luminal gate, and thereclosing of luminal gate induces a shift in the cytoplasmic domains that subsequently enables the dephosphorylation of Asp351-P. Formation of transient residue-residue contacts along the conformational transitions predicted by the computations provide an experimental route to test the general validity of the computational pathways.

Assembly of a Tyr122 Hydrophobic Cluster in Sarcoplasmic Reticulum Ca2+-ATPase Synchronizes Ca2+ Affinity Reduction and Release with Phosphoenzyme Isomerization

The mechanism whereby events in and around the catalytic site/head of Ca(2+)-ATPase effect Ca(2+) release to the lumen from the transmembrane helices remains elusive. We developed a method to determine deoccluded bound Ca(2+) by taking advantage of its rapid occlusion upon formation of E1PCa2 and of stabilization afforded by a high concentration of Ca(2+). The assay is applicable to minute amounts of Ca(2+)-ATPase expressed in COS-1 cells. It was validated by measuring the Ca(2+) binding properties of unphosphorylated Ca(2+)-ATPase. The method was then applied to the isomerization of the phosphorylated intermediate associated with the Ca(2+) release process E1PCa2 → E2PCa2 → E2P + 2Ca(2+). In the wild type, Ca(2+) release occurs concomitantly with EP isomerization fitting with rate-limiting isomerization (E1PCa2 → E2PCa2) followed by very rapid Ca(2+) release. In contrast, with alanine mutants of Leu(119) and Tyr(122) on the cytoplasmic part of the second transmembrane helix (M2) and Ile(179) on the A domain, Ca(2+) release in 10 μm Ca(2+) lags EP isomerization, indicating the presence of a transient E2P state with bound Ca(2+). The results suggest that these residues function in Ca(2+) affinity reduction in E2P, likely via a structural rearrangement at the cytoplasmic part of M2 and a resulting association with the A and P domains, therefore leading to Ca(2+) release.

Kinetics of luminal proton binding to the SR Ca-ATPase

An open membrane preparation containing SR Ca-ATPase was prepared from sarcoplasmic-reticulum vesicles to study the ion binding kinetics in the P-E(2) conformation. Because Ca(2+) and H(+) binding are electrogenic reactions, fluorescent styryl dyes could be used to determine changes in the binding site occupation in equilibrium titration experiments and time-resolved relaxation processes triggered by a pH jump. By photo release from caged proton the pH of the electrolyte could be decreased in a step of 0.1 pH units by a single ultraviolet-laser flash. Analysis of the pH-jump induced relaxation process in the P-E(2) conformation showed that three Ca-ATPase-specific processes could be identified, fast H(+) binding (τ < 100 μs) and pH-insensitive conformational relaxations after the release of the Ca(2+) ion (τ ∼160 ms), and a slow process (τ ∼3.4 s) whose origin could not be unambiguously revealed. The Ca(2+)-binding affinity in the P-E(2) conformation was reduced with increasing pH, a behavior that can be explained by a reversible transition of the empty P-E(2) state to an inactivated state of the ion pump. All findings are interpreted in the framework of the Post-Albers pump cycle introduced previously, supplemented by an additional transition to an inhibited state of the ion pump.

Ca2+ release to lumen from ADP-sensitive phosphoenzyme E1PCa2 without bound K+ of sarcoplasmic reticulum Ca2+-ATPase

During Ca(2+) transport by sarcoplasmic reticulum Ca(2+)-ATPase, the conformation change of ADP-sensitive phosphoenzyme (E1PCa(2)) to ADP-insensitive phosphoenzyme (E2PCa(2)) is followed by rapid Ca(2+) release into the lumen. Here, we find that in the absence of K(+), Ca(2+) release occurs considerably faster than E1PCa(2) to E2PCa(2) conformation change. Therefore, the lumenal Ca(2+) release pathway is open to some extent in the K(+)-free E1PCa(2) structure. The Ca(2+) affinity of this E1P is as high as that of the unphosphorylated ATPase (E1), indicating the Ca(2+) binding sites are not disrupted. Thus, bound K(+) stabilizes the E1PCa(2) structure with occluded Ca(2+), keeping the Ca(2+) pathway to the lumen closed. We found previously (Yamasaki, K., Wang, G., Daiho, T., Danko, S., and Suzuki, H. (2008) J. Biol. Chem. 283, 29144-29155) that the K(+) bound in E2P reduces the Ca(2+) affinity essential for achieving the high physiological Ca(2+) gradient and to fully open the lumenal Ca(2+) gate for rapid Ca(2+) release (E2PCa(2) → E2P + 2Ca(2+)). These findings show that bound K(+) is critical for stabilizing both E1PCa(2) and E2P structures, thereby contributing to the structural changes that efficiently couple phosphoenzyme processing and Ca(2+) handling.

Relationship between Ca2+-affinity and shielding of bulk water in the Ca2+-pump from molecular dynamics simulations

The sarcoplasmic reticulum Ca(2+)-ATPase transports two Ca(2+) per ATP hydrolyzed from the cytoplasm to the lumen against a large concentration gradient. During transport, the pump alters the affinity and accessibility for Ca(2+) by rearrangements of transmembrane helices. In this study, all-atom molecular dynamics simulations were performed for wild-type Ca(2+)-ATPase in the Ca(2+)-bound form and the Gln mutants of Glu771 and Glu908. Both of them contribute only one carboxyl oxygen to site I Ca(2+), but only Glu771Gln completely looses the Ca(2+)-binding ability. The simulations show that: (i) For Glu771Gln, but not Glu908Gln, coordination of Ca(2+) was critically disrupted. (ii) Coordination broke at site II first, although Glu771 and Glu908 only contribute to site I. (iii) A water molecule bound to site I Ca(2+) and hydrogen bonded to Glu771 in wild-type, drastically changed the coordination of Ca(2+) in the mutant. (iv) Water molecules flooded the binding sites from the lumenal side. (v) The side chain conformation of Ile775, located at the head of a hydrophobic cluster near the lumenal surface, appears critical for keeping out bulk water. Thus the simulations highlight the importance of the water molecule bound to site I Ca(2+) and point to a strong relationship between Ca(2+)-coordination and shielding of bulk water, providing insights into the mechanism of gating of ion pathways in cation pumps.

Sarcoplasmic reticulum function in smooth muscle

The sarcoplasmic reticulum (SR) of smooth muscles presents many intriguing facets and questions concerning its roles, especially as these change with development, disease, and modulation of physiological activity. The SR's function was originally perceived to be synthetic and then that of a Ca store for the contractile proteins, acting as a Ca amplification mechanism as it does in striated muscles. Gradually, as investigators have struggled to find a convincing role for Ca-induced Ca release in many smooth muscles, a role in controlling excitability has emerged. This is the Ca spark/spontaneous transient outward current coupling mechanism which reduces excitability and limits contraction. Release of SR Ca occurs in response to inositol 1,4,5-trisphosphate, Ca, and nicotinic acid adenine dinucleotide phosphate, and depletion of SR Ca can initiate Ca entry, the mechanism of which is being investigated but seems to involve Stim and Orai as found in nonexcitable cells. The contribution of the elemental Ca signals from the SR, sparks and puffs, to global Ca signals, i.e., Ca waves and oscillations, is becoming clearer but is far from established. The dynamics of SR Ca release and uptake mechanisms are reviewed along with the control of luminal Ca. We review the growing list of the SR's functions that still includes Ca storage, contraction, and relaxation but has been expanded to encompass Ca homeostasis, generating local and global Ca signals, and contributing to cellular microdomains and signaling in other organelles, including mitochondria, lysosomes, and the nucleus. For an integrated approach, a review of aspects of the SR in health and disease and during development and aging are also included. While the sheer versatility of smooth muscle makes it foolish to have a "one model fits all" approach to this subject, we have tried to synthesize conclusions wherever possible.

A thermodynamic model of the cardiac sarcoplasmic/endoplasmic Ca(2+) (SERCA) pump

We present a biophysically based kinetic model of the cardiac SERCA pump that consolidates a range of experimental data into a consistent and thermodynamically constrained framework. The SERCA model consists of a number of sub-states with partial reactions that are sensitive to Ca(2+) and pH, and to the metabolites MgATP, MgADP, and Pi. Optimization of model parameters to fit experimental data favors a fully cooperative Ca(2+)-binding mechanism and predicts a Ca(2+)/H(+) counter-transport stoichiometry of 2. Moreover, the order of binding of the partial reactions, particularly the binding of MgATP, proves to be a strong determinant of the ability of the model to fit the data. A thermodynamic investigation of the model indicates that the binding of MgATP has a large inhibitory effect on the maximal reverse rate of the pump. The model is suitable for integrating into whole-cell models of cardiac electrophysiology and Ca(2+) dynamics to simulate the effects on the cell of compromised metabolism arising in ischemia and hypoxia.

Review. Peering into an ATPase ion pump with single-channel recordings

In principle, an ion channel needs no more than a single gate, but a pump requires at least two gates that open and close alternately to allow ion access from only one side of the membrane at a time. In the Na+,K+-ATPase pump, this alternating gating effects outward transport of three Na+ ions and inward transport of two K+ ions, for each ATP hydrolysed, up to a hundred times per second, generating a measurable current if assayed in millions of pumps. Under these assay conditions, voltage jumps elicit brief charge movements, consistent with displacement of ions along the ion pathway while one gate is open but the other closed. Binding of the marine toxin, palytoxin, to the Na+,K+-ATPase uncouples the two gates, so that although each gate still responds to its physiological ligand they are no longer constrained to open and close alternately, and the Na+,K+-ATPase is transformed into a gated cation channel. Millions of Na+ or K+ ions per second flow through such an open pump-channel, permitting assay of single molecules and allowing unprecedented access to the ion transport pathway through the Na+,K+-ATPase. Use of variously charged small hydrophilic thiol-specific reagents to probe cysteine targets introduced throughout the pump's transmembrane segments allows mapping and characterization of the route traversed by transported ions.

The ion pathway through the opened Na(+),K(+)-ATPase pump

P-type ATPases pump ions across membranes, generating steep electrochemical gradients that are essential for the function of all cells. Access to the ion-binding sites within the pumps alternates between the two sides of the membrane to avoid the dissipation of the gradients that would occur during simultaneous access. In Na(+),K(+)-ATPase pumps treated with the marine agent palytoxin, this strict alternation is disrupted and binding sites are sometimes simultaneously accessible from both sides of the membrane, transforming the pumps into ion channels (see, for example, refs 2, 3). Current recordings in these channels can monitor accessibility of introduced cysteine residues to water-soluble sulphydryl-specific reagents. We found previously that Na(+),K(+) pump-channels open to the extracellular surface through a deep and wide vestibule that emanates from a narrower pathway between transmembrane helices 4 and 6 (TM4 and TM6). Here we report that cysteine scans from TM1 to TM6 reveal a single unbroken cation pathway that traverses palytoxin-bound Na(+),K(+) pump-channels from one side of the membrane to the other. This pathway comprises residues from TM1, TM2, TM4 and TM6, passes through ion-binding site II, and is probably conserved in structurally and evolutionarily related P-type pumps, such as sarcoplasmic- and endoplasmic-reticulum Ca(2+)-ATPases and H(+),K(+)-ATPases.

Structural aspects of ion pumping by Ca2+-ATPase of sarcoplasmic reticulum

Ca2+-ATPase of muscle sarcoplasmic reticulum is an ATP-powered Ca2+-pump that establishes a >10,000-fold concentration gradient across the membrane. Its crystal structures have been determined for nine different states that cover nearly the entire reaction cycle. Presented here is a brief structural account of the ion pumping process, which is achieved by a series of very large domain rearrangements.

Proton paths in the sarcoplasmic reticulum Ca(2+) -ATPase

The sarcoplasmic reticulum Ca(2+)-ATPase (SERCA1a) pumps Ca(2+) and countertransport protons. Proton pathways in the Ca(2+) bound and Ca(2+)-free states are suggested based on an analysis of crystal structures to which water molecules were added. The pathways are indicated by chains of water molecules that interact favorably with the protein. In the Ca(2+) bound state Ca(2)E1, one of the proposed Ca(2+) entry paths is suggested to operate additionally or alternatively as proton pathway. In analogs of the ADP-insensitive phosphoenzyme E2P and in the Ca(2+)-free state E2, the proton path leads between transmembrane helices M5 to M8 from the lumenal side of the protein to the Ca(2+) binding residues Glu-771, Asp-800 and Glu-908. The proton path is different from suggested Ca(2+) dissociation pathways. We suggest that separate proton and Ca(2+) pathways enable rapid (partial) neutralization of the empty cation binding sites. For this reason, transient protonation of empty cation binding sites and separate pathways for different ions are advantageous for P-type ATPases in general.

Kinetics of proton binding to the sarcoplasmic reticulum Ca-ATPase in the E1 state

A new caged proton, 2-methoxy-5-nitrophenyl sulfate, was synthesized and used in time-resolved pH jump experiments to study proton binding in the sarcoplasmic reticulum Ca-ATPase. The major advantage of this compound is that it does not produce significant artifacts in experiments in which the fluorescent styryl dye 2BITC is used to monitor ion movements in the Ca pump. Two rate-limiting processes were resolved and their dependence on pH, Ca(2+) concentration, and temperature investigated. The faster process showed a relaxation time between 4 and 8 ms independent on pH and Ca(2+) concentration, and the time constant of the slower process varied between 31 ms (0 Ca(2+)) and 100 ms (100 microM Ca(2+)). A consistent mechanism to explain the results was derived in agreement with previous studies and the generally accepted Post-Albers scheme of the pump cycle. This mechanism requires that under physiological conditions the ion-binding sites are always occupied and two protons and a Ca(2+) ion replace each other. In the absence of ATP at low pH a nonphysiological state can be induced in which up to four protons bind to the Ca pump in the E(1) conformation. So far it could not be verified whether these additional protons bind to amino acid side chains or are coordinated as hydronium ions.

Conformational changes in sarcoplasmic reticulum Ca(2+)-ATPase mutants: effect of mutations either at Ca(2+)-binding site II or at tryptophan 552 in the cytosolic domain

By analyzing, after expression in yeast and purification, the intrinsic fluorescence properties of point mutants of rabbit Ca(2+)-ATPase (SERCA1a) with alterations to amino acid residues in Ca(2+)-binding site I (E(771)), site II (E(309)), in both sites (D(800)), or in the nucleotide-binding domain (W(552)), we were able to follow the conformational changes associated with various steps in the ATPase catalytic cycle. Whereas Ca(2+) binding to purified wild-type (WT) ATPase in the absence of ATP leads to the rise in Trp fluorescence expected for the so-called E2 --> E1Ca(2) transition, the Ca(2+)-induced fluorescence rise is dramatically reduced for the E(309)Q mutant. As this purified E(309)Q mutant retains the ability to bind Ca(2+) at site I (but not at site II), we tentatively conclude that the protein reorganization induced by Ca(2+) binding at site II makes the major contribution to the overall Trp fluorescence changes observed upon Ca(2+) binding to both sites. Judging from the fluorescence response of W(552)F, similar to that of WT, these changes appear to be primarily due to membranous tryptophans, not to W(552). The same holds for the fluorescence rise observed upon phosphorylation from P(i) (the so-called E2 --> E2P transition). As for WT ATPase, Mg(2+) binding in the absence of Ca(2+) affects the fluorescence of the E(309)Q mutant, suggesting that this Mg(2+)-dependent fluorescence rise does not reflect binding of Mg(2+) to Ca(2+) sites; instead, Mg(2+) probably binds close to the catalytic site, or perhaps near transmembrane span M3, at a location recently revealed by Fe(2+)-catalyzed oxidative cleavage. Mutation of W(552) hardly affects ATP-induced fluorescence changes in the absence of Ca(2+), which are therefore mostly due to membranous Trp residues, demonstrating long-range communication between the nucleotide-binding domain and the membranous domain.

Essential role for Pro21 in phospholamban for optimal inhibition of the Ca-ATPase

We have investigated the functional role of the flexible hinge region centered near the sequence TIEMP(21), which connects the N-terminal cytosolic and C-terminal membrane-spanning helical domains of phospholamban (PLB). Specifically, we ask if the conformation of this region is important to attain optimal inhibitory interactions with the Ca-ATPase. A genetically engineered PLB mutant was constructed in which Pro(21) was mutated to an alanine (P21A-PLB(C)); in this construct, all three transmembrane cysteines were substituted with alanines to stabilize the monomeric form of PLB, and a unique cysteine was introduced at position 24 near the hinge element (A24C), permitting the site-specific attachment of fluorescein-5-maleimide (FMal) to monitor structure changes. In agreement with prior measurements in cardiac SR microsomes, the calcium concentration associated with half-maximal activation (Ca(1/2)) of the Ca-ATPase, 290 +/- 10 nM, is shifted to 580 +/- 20 nM when co-reconstituted with PLB(C) (Pro21) as a result of a reduction in the cooperativity associated with the calcium-dependent structural transition. Kinetic simulations indicate that PLB(C) association with the Ca-ATPase results in a 75% reduction in the equilibrium constant associated with the formation of the second high-affinity calcium binding site. In comparison, there is a 43% reduction in KCa(1/2) upon reconstitution of the Ca-ATPase with P21A-PLB(C), which can be simulated by decreasing the equilibrium constant associated with the calcium-dependent structural activation by 50%. The diminished inhibitory action of P21A-PLB(C) is associated with alterations in the structure of the hinge element, as evidenced by the diminished solvent accessibility of FMal relative to the native structure. Likewise, increases in the alpha-helical content and decreases in the mobility of the carboxyl-terminal domain of P21A-PLB(C) are observed using circular dichroism and fluorescence spectroscopy. Collectively, these results indicate that the overall dimensions of the carboxyl-terminal domain of PLB are increased through a stabilization of secondary structural elements upon mutation in P21A-PLB(C) that result in a reduction in the ability of the amino-terminal cytosolic portion of PLB to productively inhibit the Ca-ATPase. Further, these results suggest that the unstructured characteristics of the flexible hinge region in PLB are critical for optimal inhibitory interactions with the Ca-ATPase and suggest its role as a conformational switch.

Kinetics of Ca2+ binding to the SR Ca-ATPase in the E1 state

The time-resolved kinetics of Ca2+ binding to the SR Ca-ATPase in the E1 state was investigated by Ca(2+)-concentration jump experiments. Ca2+ was released by an ultraviolet-light flash from caged calcium, and charge movements in the membrane domain of the ion pumps were detected by the fluorescent styryl dye 2BITC. The partial reaction (H3E1 <-->) E1 <--> CaE1 <--> Ca2E1 can be characterized by two time constants, tau1 and tau2, both of which are not significantly Ca(2+)-concentration-dependent and only weakly pH-dependent at pH < 7.5. Both time constants differ by a factor of approximately 50 (4.7 vs. 200 ms). The weak substrate-dependence indicates that the rate-limiting process is not related to Ca2+ migration through the access channel and ion binding to the binding sites but to conformational rearrangements preceding the ion movements. The high activation energy obtained for both processes, 42.3 kJ mol(-1) and 60.3 kJ mol(-1) at pH 7.2, support this concept. Transient binding of Ca ions to the loop L67 and a movement of the Ca-loaded loop are discussed as a mechanism that facilitates the entrance of both Ca ions into the access channel to the ion-binding sites.

The average conformation at micromolar [Ca2+] of Ca2+-atpase with bound nucleotide differs from that adopted with the transition state analog ADP.AlFx or with AMPPCP under crystallization conditions at millimolar [Ca2+]

Crystalline forms of detergent-solubilized sarcoplasmic reticulum Ca2+-ATPase, obtained in the presence of either a substrate analog, AMPPCP, or a transition state complex, ADP.fluoroaluminate, were recently described to share the same general architecture despite the fact that, when studied in a test tube, these forms show different functional properties. Here, we show that the differences in the properties of the E1.AMPPCP and the E1.ADP.AlFx membraneous (or solubilized) forms are much less pronounced when these properties are examined in the presence of 10 mM Ca2+ (the concentration prevailing in the crystallization media) than when they are examined in the presence of the few micromolar of Ca2+ known to be sufficient to saturate the transport sites. This concerns various properties, including ATPase susceptibility to proteolytic cleavage by proteinase K, ATPase reactivity toward SH-directed Ellman's reagent, ATPase intrinsic fluorescence properties (here described for the E1.ADP.AlFx complex for the first time), and also the rates of 45Ca2+-40Ca2+ exchange at site "II." These results solve the above paradox at least partially and suggest that the presence of a previously unrecognized Ca2+ ion in the E1.AMPPCP crystals should be re-investigated. A contrario, they emphasize the fact that the average conformation of the E1.AMPPCP complex under usual conditions in the test tube differs from that found in the crystalline form. The extended conformation of nucleotide revealed by the E1.AMPPCP crystalline form might be only indicative of the requirements for further processing of the complex, toward the transition state leading to phosphorylation and Ca2+ occlusion.

Conformational changes within the cytosolic portion of phospholamban upon release of Ca-ATPase inhibition

Phospholamban (PLB) is a major target of the beta-adrenergic cascade in the heart, functioning to modulate contractile force by altering the rate of calcium re-sequestration by the Ca-ATPase. Functionally, inhibition by PLB binding is manifested by shifts in the calcium dependence of Ca-ATPase activation toward higher calcium levels; phosphorylation of PLB by PKA reverses the inhibitory action of PLB. To investigate structural changes in the cytoplasmic portion of PLB that result from either the phosphorylation of PLB by cAMP-dependent protein kinase (PKA) or calcium binding to the Ca-ATPase, we have used frequency-domain fluorescence spectroscopy to measure the spatial separation and conformational heterogeneity between N-(1-pyrenyl)maleimide, covalently bound to a single cysteine (Cys(24)) engineered near the membrane surface of the transmembrane domain of PLB, and Tyr(6) in the cytosolic domain. Irrespective of calcium activation of the Ca-ATPase or phosphorylation of Ser(16) in PLB by PKA, we find that PLB remains tightly associated with the Ca-ATPase in a well-defined conformation. However, calcium activation of the Ca-ATPase induces an increase in the overall dimensions of the cytoplasmic portion of bound PLB, whereas PLB phosphorylation results in a more compact structure, consistent with increased helical content induced by a salt link between phospho-Ser(16) and Arg(13). Thus, enzyme activation of the Ca-ATPase may occur through different mechanisms: calcium binding to high-affinity sites within the Ca-ATPase functions to overcome conformational constraints imposed by PLB on the N-domain of the Ca-ATPase; alternatively, phosphorylation stabilizes the backbone fold of PLB to release inhibitory interactions with the Ca-ATPase.

Time-resolved charge translocation by sarcoplasmic reticulum Ca-ATPase measured on a solid supported membrane

Sarcoplasmic reticulum vesicles were adsorbed on an octadecanethiol/phosphatidylcholine mixed bilayer anchored to a gold electrode, and the Ca-ATPase contained in the vesicles was activated by ATP concentration jumps both in the absence and in the presence of K(+) ions and at different pH values. Ca(2+) concentration jumps in the absence of ATP were also carried out. The resulting capacitive current transients were analyzed together with the charge under the transients. The relaxation time constants of the current transients were interpreted on the basis of an equivalent circuit. The current transient after ATP concentration jumps and the charge after Ca(2+) concentration jumps in the absence of ATP exhibit almost the same dependence upon the Ca(2+) concentration, with a half-saturating value of approximately 1.5 microM. The pH dependence of the charge after Ca(2+) translocation demonstrates the occurrence of one H(+) per one Ca(2+) countertransport at pH 7 by direct charge-transfer measurements. The presence of K(+) decreases the magnitude of the current transients without altering their shape; this decrease is explained by K(+) binding to the cytoplasmic side of the pump in the E(1) conformation and being released to the same side during the E(1)-E(2) transition.

Ca2+ occlusion and gating function of Glu309 in the ADP-fluoroaluminate analog of the Ca2+-ATPase phosphoenzyme intermediate

In the absence of ATP the sarcoplasmic reticulum ATPase (SERCA) binds two Ca(2+) with high affinity. The two bound Ca(2+) rapidly undergo reverse dissociation upon addition of EGTA, but can be distinguished by isotopic exchange indicating fast exchange at a superficial site (site II), and retardation of exchange at a deeper site (site I) by occupancy of site II. Site II mutations that allow high affinity binding to site I, but only low affinity binding to site II, show that retardation of isotopic exchange requires higher Ca(2+) concentrations with the N796A mutant, and is not observed with the E309Q mutant even at millimolar Ca(2+). Fluoroaluminate forms a complex at the catalytic site yielding stable analogs of the phosphoenzyme intermediate, with properties similar to E2-P or E1-P.Ca(2). Mutational analysis indicates that Asp(351), Lys(352), Thr(353), Asp(703), Asn(706), Asp(707), Thr(625), and Lys(684) participate in stabilization of fluoroaluminate and Mg(2+) at the phosphorylation site. In the presence of fluoroaluminate and Ca(2+), ADP (or AMP-PCP) favors formation of a stable ADP.E1-P.Ca(2) analog. This produces strong occlusion of Ca(2+) bound to both sites (I and II), whereby dissociation occurs very slowly even following addition of EGTA. Occlusion by fluoraluminate and ADP is not observed with the E309Q mutant, suggesting a gating function of Glu(309) at the mouth of a binding cavity with a single path of entry. This phenomenon corresponds to the earliest step of the catalytic cycle following utilization of ATP. Experiments on limited proteolysis reveal that a long range conformational change, involving displacement of headpiece domains and transmembrane helices, plays a mechanistic role.

Structure-function relationship in P-type ATPases--a biophysical approach

P-type ATPases are a large family of membrane proteins that perform active ion transport across biological membranes. In these proteins the energy-providing ATP hydrolysis is coupled to ion-transport that builds up or maintains the electrochemical potential gradients of one or two ion species across the membrane. P-type ATPases are found in virtually all eukaryotic cells and also in bacteria, and they are transporters of a broad variety of ions. So far, a crystal structure with atomic resolution is available only for one species, the SR Ca-ATPase. However, biochemical and biophysical studies provide an abundance of details on the function of this class of ion pumps. The aim of this review is to summarize the results of preferentially biophysical investigations of the three best-studied ion pumps, the Na,K-ATPase, the gastric H,K-ATPase, and the SR Ca-ATPase, and to compare functional properties to recent structural insights with the aim of contributing to the understanding of their structure-function relationship.

Importance of Transmembrane Segment M1 of the Sarcoplasmic Reticulum Ca2+-ATPase in Ca2+ Occlusion and Phosphoenzyme Processing

The functional consequences of a series of point mutations in transmembrane segment M1 of sarcoplasmic reticulum Ca2+-ATPase were analyzed in steady-state and transient kinetic experiments examining the partial reaction steps involved in Ca2+ interaction and phosphoenzyme turnover. Arginine or leucine substitution of Glu51, Glu55, or Glu58, located in the N-terminal third of M1, did not affect these functions. Arginine or leucine substitution of Asp59, located right at the bend of M1 seen in the crystal structure of the thapsigargin-bound form, caused a 10-fold increase of the rate of Ca2+ dissociation toward the cytoplasmic side. Mutation of Leu60 to alanine or proline and of Val62 to alanine also enhanced Ca2+ dissociation, whereas an 11-fold reduction of the rate of Ca2+ dissociation was observed upon alanine substitution of Leu65, thus providing evidence for a relation of the middle part of M1 to a gating mechanism controlling the dissociation of occluded Ca2+ from its membranous binding sites. Moreover, phosphoenzyme processing was affected by some of the latter mutations, in particular leucine substitution of Asp59, and alanine substitution of Leu65 accelerated the transition to ADP-insensitive phosphoenzyme and blocked its dephosphorylation, thus demonstrating that this part of M1, besides being important in Ca2+ interaction, furthermore, is a critical element in the long range signaling between the transmembrane domain and the cytoplasmic catalytic site.

Spatial and dynamic interactions between phospholamban and the canine cardiac Ca2+ pump revealed with use of heterobifunctional cross-linking agents

Heterobifunctional thiol to amine cross-linking agents were used to gain new insights on the dynamics and conformational factors governing the interaction between the cardiac Ca2+ pump (SERCA2a) and phospholamban (PLB). PLB is a small protein inhibitor of SERCA2a that reduces enzyme affinity for Ca2+ and thereby regulates cardiac contractility. We found that the PLB monomer with Asn27 or Asn30 changed to Cys (N27C-PLB or N30C-PLB) cross-linked to lysine of SERCA2a within seconds with > or =80% efficiency. Optimal cross-linking occurred at spacer chain lengths of 10 and 15 A for N27C and N30C, respectively. The rapid time course of cross-linking indicated that neither dissociation of PLB pentamers nor binding of PLB monomers to SERCA2a was rate-limiting. Cross-linking occurred only to the E2 (Ca2+-free) conformation of SERCA2a, was strongly favored by nucleotide binding to this state, and was completely inhibited by thapsigargin. Protein sequencing in combination with mutagenesis identified of Lys328 of SERCA2a as the target of cross-linking. A three-dimensional map of interacting residues indicated that the cross-linking distances were entirely compatible with the 10-A distance recently determined between N30C of PLB and Cys318 of SERCA2a. In contrast, Lys3 of PLB did not cross-link to any Lys (or Cys) of SERCA2a, suggesting that previous three-dimensional models that constrain Lys3 near residues 397-400 of thapsigargin-inhibited SERCA2a should be viewed with caution. Furthermore, although earlier models of PLB.SERCA2a are based on thapsigargin-bound SERCA, our results suggest that the nucleotide-bound, E2 conformation is substantially different and represents the key conformational state for interacting with PLB.

Calcium transport by sarcoplasmic reticulum Ca(2+)-ATPase. Role of the A domain and its C-terminal link with the transmembrane region

After treatment of sarcoplasmic reticulum Ca(2+)-ATPase with proteinase K (PK) in the presence of Ca(2+) and a protecting non-phosphorylated ligand (e.g. adenosine 5'-(beta,gamma-methylenetriphosphate), we were able to prepare in high yield an ATPase species that only differs from intact ATPase because of excision of the MAATE(243) sequence from the loop linking the A domain with the third transmembrane segment. The PK-treated ATPase was unable to transport Ca(2+) and to catalyze ATP hydrolysis, but it could bind two calcium ions with high affinity and react with ATP to form a classical ADP-sensitive phosphoenzyme, Ca(2)E1P, with occluded Ca(2+). The ability of Ca(2)E1P to become converted to the Ca(2+)-free ADP-insensitive form, E2P, was strongly reduced, as was the ability of PK-treated ATPase to react with orthovanadate or to form an E2P intermediate from inorganic phosphate in the absence of Ca(2+). PK-treated ATPase also reacted with thapsigargin to form a complex with altered properties, and the tryptic cleavage "T2" site in the A domain was no longer protected in the absence of Ca(2+). It is probable that disrupting the C-terminal link of the A domain with the transmembrane region severely compromises reorientation of A and P domains and the functionally critical cross-talk of these domains with the membrane-bound Ca(2+) ions.

A calcium pump made visible

The first high-resolution structure of a P-type ATPase, that of the Ca(2+)-ATPase of skeletal muscle sarcoplasmic reticulum, was published in 2000. This structure has provided many clues to how the Ca(2+)-ATPase might work, but no complete answers. The Ca(2+)-ATPase structure reveals no clear pathway from the cytoplasmic side of the membrane to the pair of high-affinity binding sites for Ca(2+) located in the transmembrane region of the ATPase and no clear pathway from these sites to the lumenal side of the membrane. The ATPase is therefore very unlike an ion channel in its construction. It is unclear from the crystal structure of the Ca(2+)-ATPase exactly how the protein sits within the lipid bilayer that surrounds it in the membrane. The Ca(2+)-ATPase is implicated in thermogenesis in some types of muscle; this could involve processes of slippage and leak modulated by interaction between the Ca(2+)-ATPase and sarcolipin.

Inhibition of sarcoplasmic reticulum Ca2+-ATPase by miconazole

The inhibition of sarcoplasmic reticulum Ca2+-ATPase activity by miconazole was dependent on the concentration of ATP and membrane protein. Half-maximal inhibition was observed at 12 microM miconazole when the ATP concentration was 50 microM and the membrane protein was 0.05 mg/ml. When ATP was 1 mM, a low micromolar concentration of miconazole activated the enzyme, whereas higher concentrations inhibited it. A qualitatively similar response was observed when Ca2+ transport was measured. Likewise, the half-maximal inhibition value was higher when the membrane concentration was raised. Phosphorylation studies carried out after sample preequilibration in different experimental settings shed light on key partial reactions such as Ca2+ binding and ATP phosphorylation. The miconazole effect on Ca2+-ATPase activity can be attributed to stabilization of the Ca2+-free enzyme conformation giving rise to a decrease in the rate of the Ca2+ binding transition. The phosphoryl transfer reaction was not affected by miconazole.

Involvement of the cytoplasmic loop L6-7 in the entry mechanism for transport of Ca2+ through the sarcoplasmic reticulum Ca2+-ATPase

We previously found that mutants of conserved aspartate residues of sarcoplasmic reticulum Ca(2+)-ATPase in the cytosolic loop, connecting transmembrane segments M6 and M7 (L6-7 loop), exhibit a strongly reduced sensitivity toward Ca(2+) activation of the transport process. In this study, yeast membranes, expressing wild type and mutant Ca(2+)-ATPases, were reacted with Cr small middle dotATP and tested for their ability to occlude (45)Ca(2+) by HPLC analysis, after cation resin and C(12)E(8) treatment. We found that the D813A/D818A mutant that displays markedly low calcium affinity was capable of occluding Ca(2+) to the same extent as wild type ATPase. Using NMR and mass spectrometry we have analyzed the conformational properties of the synthetic L6-7 loop and demonstrated the formation of specific 1:1 cation complexes of the peptide with calcium and lanthanum. All three aspartate Asp(813)/Asp(815)/Asp(818) were required to coordinate the trivalent lanthanide ion. Overall these observations suggest a dual function of the loop: in addition to mediating contact between the intramembranous Ca(2+)-binding sites and the cytosolic phosphorylation site (Zhang, Z., Lewis, D., Sumbilla, C., Inesi G., and Toyoshima, C. (2001) J. Biol. Chem. 276, 15232-15239), the L6-7 loop, in a preceding step, participates in the formation of an entrance port, before subsequent high affinity binding of Ca(2+) inside the membrane.

Kinetics of the Ca(2+), H(+), and Mg(2+) interaction with the ion-binding sites of the SR Ca-ATPase

Electrochromic styryl dyes were used to investigate mutually antagonistic effects of Ca(2+) and H(+) on binding of the other ion in the E(1) and P-E(2) states of the SR Ca-ATPase. On the cytoplasmic side of the protein in the absence of Mg(2+) a strictly competitive binding sequence, H(2)E(1) <==> HE(1) <==> E(1) <==> CaE(1) <==> Ca(2)E(1), was found with two Ca(2+) ions bound cooperatively. The apparent equilibrium dissociation constants were in the order of K(1/2)(2 Ca) = 34 nM, K(1/2)(H) = 1 nM and K(1/2)(H(2)) = 1.32 microM. Up to 2 Mg(2+) ions were also able to enter the binding sites electrogenically and to compete with the transported substrate ions (K(1/2)(Mg) = 165 microM, K(1/2)(Mg(2)) = 7.4 mM). In the P-E(2) state, with binding sites facing the lumen of the sarcoplasmatic reticulum, the measured concentration dependence of Ca(2+) and H(+) binding could be described satisfactorily only with a branched reaction scheme in which a mixed state, P-E(2)CaH, exists. From numerical simulations, equilibrium dissociation constants could be determined for Ca(2+) (0.4 mM and 25 mM) and H(+) (2 microM and 10 microM). These simulations reproduced all observed antagonistic concentration dependences. The comparison of the dielectric ion binding in the E(1) and P-E(2) conformations indicates that the transition between both conformations is accompanied by a shift of their (dielectric) position.

Slippage and uncoupling in P-type cation pumps; implications for energy transduction mechanisms and regulation of metabolism

P-type ATPases couple scalar and vectorial events under optimized states. A number of procedures and conditions lead to uncoupling or slippage. A key branching point in the catalytic cycle is at the cation-bound form of E(1)-P, where isomerization to E(2)-P leads to coupled transport, and hydrolysis leads to uncoupled release of cations to the cis membrane surface. The phenomenon of slippage supports a channel model for active transport. Ability to occlude cations within the channel is essential for coupling. Uncoupling and slippage appear to be inherent properties of P-type cation pumps, and are significant contributors to standard metabolic rate. Heat production is favored in the uncoupled state. A number of disease conditions, include ageing, ischemia and cardiac failure, result in uncoupling of either the Ca(2+)-ATPase or Na(+)/K(+)-ATPase.

Kinetic analysis of a model of the sarcoplasmic reticulum Ca-ATPase, with variable stoichiometry, which enhances the amount and the rate of Ca transport

The sarcoplasmic reticulum (SR) Ca-dependent adenosinetriphosphatase (Ca-ATPase) actively transports Ca2+ from the myoplasm to the SR lumen. Under optimal conditions a 2:1 stoichiometry of Ca transport/ATP hydrolysis has been observed, but lower stoichiometries have been reported under several circumstances. A lower stoichiometry under conditions of high Ca2+ load, although thermodynamically less efficient, could in theory increase the rate and the maximal amount of Ca uptake. We analysed, by computing simulation, the transient kinetics of a model of the SR Ca-ATPase with variable stoichiometry. The model is based on current experimental reports and includes the most relevant properties of the system. The results show an acceleration in the rate of Ca uptake, an increase in the net Ca transport, and an increase in the rate of [Ca2+] reduction in the medium, which might be physiologically useful to increase the rate of Ca pumping at high Ca load of the sarcoplasmic reticulum.

Characterisation of thapsigargin-releasable Ca(2+) from the Ca(2+)-ATPase of sarcoplasmic reticulum at limiting [Ca(2+)]

The Ca(2+) binding sites of the Ca(2+)-ATPase of skeletal muscle sarcoplasmic reticulum (SR) have been identified as two high-affinity sites orientated towards the cytoplasm, two sites of low affinity facing the lumen, and a transient occluded species that is isolated from both membrane surfaces. Binding and release studies, using (45)Ca(2+), have invoked models with sequential binding and release from high- and low-affinity sites in a channel-like structure. We have characterised turnover conditions in isolated SR vesicles with oxalate in a Ca(2+)-limited state, [Ca(2)](lim), where both high- and low-affinity sites are vacant in the absence of chelators (Biochim. Biophys. Acta 1418 (1999) 48-60). Thapsigargin (TG), a high-affinity specific inhibitor of the Ca(2+)-ATPase, released a fraction of total Ca(2+) at [Ca(2+)](lim) that accumulated during active transport. Maximal Ca(2+) release was at 2:1 TG/ATPase. Ionophore, A23187, and Triton X-100 released the rest of Ca(2+) resistant to TG. The amount of Ca(2+) released depended on the incubation time at [Ca(2+)](lim), being 3.0 nmol/mg at 20 s and 0.42 nmol/mg at 1000 s. Rate constants for release declined from 0. 13 to 0.03 s(-1). The rapidly released early fraction declined with time and k=0.13 min(-1). Release was not due to reversal of the pump cycle since ADP had no effect; neither was release impaired with substrates acetyl phosphate or GTP. A phase of reuptake of Ca(2+) followed release, being greater with shorter delay (up to 200 s) following active transport. Reuptake was minimal with GTP, with delays more than 300 s, and was abolished by vanadate and at higher [TG], >5 microM. Ruthenium red had no effect on efflux, indicating that ryanodine-sensitive efflux channels in terminal cisternal membranes are not involved in the Ca(2+) release mechanism. It is concluded that the Ca(2+) released by TG is from the occluded Ca(2+) fraction. The Ca(2+) occlusion sites appear to be independent of both high-affinity cytoplasmic and low-affinity lumenal sites, supporting a multisite 'in line' sequential binding mechanism for Ca(2+) transport.

Labeling the Ca2+-ATPase of skeletal muscle sarcoplasmic reticulum with maleimidylsalicylic acid

Maleimidylsalicylic acid reacts with the Ca(2+)-ATPase of skeletal muscle sarcoplasmic reticulum with high affinity and inhibits the ATPase activity following a pseudo-first-order kinetic with a rate constant of 8.3 m(-1) s(-1). Calcium binding remains unaffected in the maleimide-inhibited ATPase. However, the presence of ATP, ADP, and, to a lesser extent, AMP protects the enzyme against inhibition. Furthermore, ATPase inhibition is accompanied by a concomitant decrease in ATP binding. The stoichiometry of the nucleotide-dependent maleimidylsalicylic acid binding is 6-10 nmol/mg ATPase, which corresponds to the binding of up to one molecule of maleimide/molecule of ATPase. The stoichiometry of maleimide binding is decreased in the presence of nucleotides and in the ATPase previously labeled with fluorescein-5'-isothiocyanate or N-ethylmaleimide A fluorescent peptide was isolated by high performance liquid chromatography after trypsin digestion of the maleimide-labeled ATPase. Analysis of the sequence and mass spectrometry of the peptide leads us to propose Cys(344) as the target for maleimidylsalicylic acid in the inhibition reaction. The effect of Cys(344) modification on the nucleotide site is discussed.

Single amino acid mutations in transmembrane domain 5 confer to the plasma membrane Ca2+ pump properties typical of the Ca2+ pump of endo(sarco)plasmic reticulum

Conserved residues in some of the transmembrane domains are proposed to mediate ion translocation by P-type pumps. The plasma membrane Ca(2+) pump (PMCA) lacks 2 of these residues in transmembrane domains (TM) 5 and 8. In particular, a glutamic acid (Glu-771) residue in TM5, which is proposed to be involved in the binding and transport of Ca(2+) by the sarcoplasmic reticulum Ca(2+) pump (SERCA), is replaced by an alanine (Ala-854) in the PMCA pump. Ala-854 has been mutated to Glu, Asp, or Gln; Glu-975 in TM8, which is an Ala in the SERCA pump, has been mutated to Gln, Asp, or Ala. The mutants have been expressed in three cell systems, with or without the help of viruses. When expressed in large amounts in Sf9 cells, the mutated pumps were isolated and analyzed in the purified state. Two of the three TM8 mutants were correctly delivered to the plasma membrane and were active. All the TM5 mutants were retained in the endoplasmic reticulum; two of them (A854Q and A854E) retained activity. Their properties (La(3+) sensitivity and decay of the phosphorylated intermediate, higher cooperativity of Ca(2+) binding with a Hill's coefficient approaching 2) differed from those of the expressed wild type PMCA pump, and resembled those of the SERCA pump.

Detailed characterization of the cooperative mechanism of Ca(2+) binding and catalytic activation in the Ca(2+) transport (SERCA) ATPase

Expression of heterologous SERCA1a ATPase in Cos-1 cells was optimized to yield levels that account for 10-15% of the microsomal protein, as revealed by protein staining on electrophoretic gels. This high level of expression significantly improved our characterization of mutants, including direct measurements of Ca(2+) binding by the ATPase in the absence of ATP, and measurements of various enzyme functions in the presence of ATP or P(i). Mutational analysis distinguished two groups of amino acids within the transmembrane domain: The first group includes Glu771 (M5), Thr799 (M6), Asp800 (M6), and Glu908 (M8), whose individual mutations totally inhibit binding of the two Ca(2+) required for activation of one ATPase molecule. The second group includes Glu309 (M4) and Asn796 (M6), whose individual or combined mutations inhibit binding of only one and the same Ca(2+). The effects of mutations of these amino acids were interpreted in the light of recent information on the ATPase high-resolution structure, explaining the mechanism of Ca(2+) binding and catalytic activation in terms of two cooperative sites. The Glu771, Thr799, and Asp800 side chains contribute prominently to site 1, together with less prominent contributions by Asn768 and Glu908. The Glu309, Asn796, and Asp800 side chains, as well as the Ala305 (and possibly Val304 and Ile307) carbonyl oxygen, contribute to site 2. Sequential binding begins with Ca(2+) occupancy of site 1, followed by transition to a conformation (E') sensitive to Ca(2+) inhibition of enzyme phosphorylation by P(i), but still unable to utilize ATP. The E' conformation accepts the second Ca(2+) on site 2, producing then a conformation (E' ') which is able to utilize ATP. Mutations of residues (Asp813 and Asp818) in the M6/M7 loop reduce Ca(2+) affinity and catalytic turnover, suggesting a strong influence of this loop on the correct positioning of the M6 helix. Mutation of Asp351 (at the catalytic site within the cytosolic domain) produces total inhibition of ATP utilization and enzyme phosphorylation by P(i), without a significant effect on Ca(2+) binding.

Three distinct and sequential steps in the release of sodium ions by the Na+/K+-ATPase

The Na+/K+ pump, a P-type ion-motive ATPase, exports three sodium ions and then imports two potassium ions in each transport cycle. Ions on one side of the membrane bind to sites within the protein and become temporarily occluded (trapped within the protein) before being released to the other side, but details of these occlusion and de-occlusion transitions remain obscure for all P-type ATPases. If it is deprived of potassium ions, the Na+/K+ pump is restricted to sodium translocation steps, at least one involving charge movement through the membrane's electric fields. Changes in membrane potential alter the rate of such electrogenic reactions and so shift the distribution of enzyme conformations. Here we use high-speed voltage jumps to initiate this redistribution and show that the resulting pre-steady-state charge movements relax in three identifiable phases, apparently reflecting de-occlusion and release of the three sodium ions. Reciprocal relationships among the sizes of these three charge components show that the three sodium ions are de-occluded and released to the extracellular solution one at a time, in a strict order.

Regulation of Ca2+ transport by sarcoplasmic reticulum Ca2+-ATPase at limiting [Ca2+]

The factors regulating Ca2+ transport by isolated sarcoplasmic reticulum (SR) vesicles have been studied using the fluorescent indicator Fluo-3 to monitor extravesicular free [Ca2+]. ATP, in the presence of 5 mM oxalate, which clamps intravesicular [Ca2+] at approximately 10 microM, induced a rapid decline in Fluo-3 fluorescence to reach a limiting steady state level. This corresponds to a residual medium [Ca2+] of 100 to 200 nM, and has been defined as [Ca2+]lim, whilst thermodynamic considerations predict a level of less than 1 nM. This value is similar to that measured in intact muscle with Ca2+ fluophores, where it is presumed that sarcoplasmic free [Ca2+] is a balance between pump and leaks. Fluorescence of Fluo-3 at [Ca2+]lim was decreased 70% to 80% by histidine, imidazole and cysteine. The K0.5 value for histidine was 3 mM, suggesting that residual [Ca2+]lim fluorescence is due to Zn2+. The level of Zn2+ in preparations of SR vesicles, measured by atomic absorption, was 0.47+/-0.04 nmol/mg, corresponding to 0.1 mol per mol Ca-ATPase. This is in agreement with findings of Papp et al. (Arch. Biochem. Biophys., 243 (1985) 254-263). Histidine, 20 mM, included in the buffer, gave a corrected value for [Ca2+]lim of 49+/-1.8 nM, which is still higher than predicted on thermodynamic grounds. A possible 'pump/leak' mechanism was tested by the effects of varying active Ca2+ transport 1 to 2 orders with temperature and pH. [Ca2+]lim remained relatively constant under these conditions. Alternate substrates acetyl phosphate and p-NPP gave similar [Ca2+]lim levels even though the latter substrate supported transport 500-fold slower than with ATP. In fact, [Ca2+]lim was lower with 10 mM p-NPP than with 5 mM ATP. The magnitude of passive efflux from Ca-oxalate loaded SR during the steady state of [Ca2+]lim was estimated by the unidirectional flux of 45Ca2+, and directly, following depletion of ATP, by measuring release of 40Ca2+, and was 0.02% of Vmax. Constant infusion of CaCl2 at [Ca2+]lim resulted in a new steady state, in which active transport into SR vesicles balances the infusion rate. Varying infusion rates allows determination of [Ca2+]-dependence of transport in the absence of chelating agents. Parameters of non-linear regression were Vmax=853 nmol/min per mg, K0.5(Ca)=279 nM, and nH(Ca)=1.89. Since conditions employed in this study are similar to those in the sarcoplasm of relaxed muscle, it is suggested that histidine, added to media in studies of intracellular Ca2+ transients, and in the relaxed state, will minimise contribution of Zn2+ to fluophore fluorescence, since it occurs at levels predicted in this study to cause significant overestimation of cytoplasmic free [Ca2+] in the relaxed state. Similar precautions may apply to non-muscle cells as well. This study also suggests that [Ca2+]lim in the resting state is a characteristic feature of Ca2+ pump function, rather than a balance between active transport and passive leakage pathways.

The cytoplasmic loop located between transmembrane segments 6 and 7 controls activation by Ca2+ of sarcoplasmic reticulum Ca2+-ATPase

During active cation transport, sarcoplasmic reticulum Ca2+-ATPase, like other P-type ATPases, undergoes major conformational changes, some of which are dependent on Ca2+ binding to high affinity transport sites. We here report that, in addition to previously described residues of the transmembrane region (Clarke, D. M., Loo, T. W., Inesi, G., and MacLennan, D. H. (1989) Nature 339, 476-478), the region located in the cytosolic L6-7 loop connecting transmembrane segments M6 and M7 has a definite influence on the sensitivity of the Ca2+-ATPase to Ca2+, i.e. on the affinity of the ATPase for Ca2+. Cluster mutation of aspartic residues in this loop results in a strong reduction of the affinity for Ca2+, as shown by the Ca2+ dependence of ATPase phosphorylation from either ATP or Pi. The reduction in Ca2+ affinity for phosphorylation from Pi is observed both at acidic and neutral pH, suggesting that these mutations interfere with binding of the first Ca2+, as proposed for some of the intramembranous residues essential for Ca2+ binding (Andersen, J. P. (1995) Biosci. Rep. 15, 243-261). Treatment of the mutated Ca2+-ATPase with proteinase K, in the absence or presence of various Ca2+ concentrations, leads to Ca2+-dependent changes in the proteolytic degradation pattern similar to those in the wild type but observed only at higher Ca2+ concentrations. This implies that these effects are not due to changes in the conformational state of Ca2+-free ATPase but that changes affecting the proteolytic digestion pattern require higher Ca2+ concentrations. We conclude that aspartic residues in the L6-7 loop might interact with Ca2+ during the initial steps of Ca2+ binding.

ATP-Induced phosphorylation of the sarcoplasmic reticulum Ca2+ ATPase: molecular interpretation of infrared difference spectra

Time-resolved infrared difference spectra of the ATP-induced phosphorylation of the sarcoplasmic reticulum Ca2+-ATPase have been recorded in H2O and 2H2O at pH 7.0 and 1 degrees C. The reaction was induced by ATP release from P3-1-(2-nitro)phenylethyladenosine 5'-triphosphate (caged ATP) and from [gamma-18O3]caged ATP. A band at 1546 cm-1, not observed with the deuterated enzyme, can be assigned to the amide II mode of the protein backbone and indicates that a conformational change associated with ATPase phosphorylation takes place after ATP binding. This is also indicated between 1700 and 1610 cm-1, where bandshifts of up to 10 cm-1 observed upon protein deuteration suggest that amide I modes of the protein backbone dominate the difference spectrum. From the band positions it is deduced that alpha-helical, beta-sheet, and probably beta-turn structures are affected in the phosphorylation reaction. Model spectra of acetyl phosphate, acetate, ATP, and ADP suggest the tentative assignment of some of the bands of the phosphorylation spectrum to the molecular groups of ATP and Asp351, which participate directly in the phosphate transfer reaction: a positive band at 1719 cm-1 to the C==O group of aspartyl phosphate, a negative band at 1239 cm-1 to the nuas(PO2-) modes of the bound ATP molecule, and a positive band at 1131 cm-1 to the nuas(PO32-) mode of the phosphoenzyme phosphate group, the latter assignment being supported by the band's sensitivity toward isotopic substitution in the gamma-phosphate of ATP. Band positions and shapes of these bands indicate that the alpha- and/or beta-phosphate(s) of the bound ATP molecule become partly dehydrated when ATP binds to the ATPase, that the phosphoenzyme phosphate group is unprotonated at pH 7.0, and that the C==O group of aspartyl phosphate does not interact with bulk water. The Ca2+ binding sites seem to be largely undisturbed by the phosphorylation reaction, and a functional role of the side chains of Asn, Gln, and Arg residues was not detected.

Direct demonstration of Ca2+ binding defects in sarco-endoplasmic reticulum Ca2+ ATPase mutants overexpressed in COS-1 cells transfected with adenovirus vectors

Single mutations of specific amino acids within the membrane-bound region of the sarco-endoplasmic reticulum Ca2+ (SERCA)-1 ATPase interfere with Ca2+ inhibition of ATPase phosphorylation by Pi (1), suggesting that these residues may be involved in complexation of two Ca2+ that are known to bind to the enzyme. However, direct measurements of Ca2+ binding in the absence of ATP have been limited by the low quantities of available mutant protein. We have improved the transfection efficiency by means of recombinant adenovirus vectors, yielding sufficient expression of wild type and mutant SERCA-1 ATPase for measurements of Ca2+ binding to the microsomal fraction of the transfected cells. We find that in the presence of 20 microM Ca2+ and in the absence of ATP, the Glu771 --> Gln, Thr799 --> Ala, Asp800 --> Asn, and Glu908 --> Ala mutants exhibit negligible binding, indicating that the oxygen functions of Glu771, Thr799, Asp800, and Glu908 are involved in interactions whose single disruption causes major changes in the highly cooperative "duplex" binding. Total loss of Ca2+ binding is accompanied by loss of Ca2+ inhibition of the Pi reaction. We also find that, at pH 7.0, the Glu309 --> Gln and the Asn796 --> Ala mutants bind approximately half as much Ca2+ as the wild type ATPase and do not interfere with Ca2+ inhibition of the Pi reaction. At pH 6.2, the Glu309 --> Gln mutant does not bind any Ca2+, and its phosphorylation by Pi is not inhibited by Ca2+. On the contrary, the Asn796 --> Ala mutant retains the behavior displayed at pH 7.0. This suggests that in the Glu309 --> Gln mutant, ionization of acidic functions in other amino acids (e.g. Glu771 and Asp800) occurs as the pH is shifted, thereby rendering Ca2+ binding possible. In the Asn796 --> Ala mutant, on the other hand, the Glu309 carboxylic function allows binding of inhibitory Ca2+ even at pH 6.2. In all cases mutational interference with the inhibition of the Pi reaction by Ca2+ can be overcome by raising the Ca2+ concentration to the mM range, consistent with a general effect of mutations on the affinity of the ATPase for Ca2+.

Cyclopiazonic acid effect on Ca2+-dependent conformational states of the sarcoplasmic reticulum ATPase. Implication for the enzyme turnover

The affinity of sarcoplasmic reticulum Ca2+-ATPase for cyclopiazonic acid is dependent on the conformational state of the enzyme. It is high in the absence of Ca2+ but low in its presence. When Ca2+ was added to the enzyme in the presence of equimolar toxin, the apparent rate constant for Ca2+ binding was 0.6 min-1 when measured at 37 degrees C. The apparent equilibrium constant for Ca2+ dissociation increased from 0.2 to 0.6 microM at neutral pH, and from 5.9 to 37 microM at pH 6.0. The apparent equilibrium constant for Ca2+ dissociation increased progressively as the amount of toxin increased above an equimolar level. Cyclopiazonic acid decreased phosphorylation by ATP and Ca2+ when the enzyme in the absence of Ca2+ was incubated in the presence of toxin, although no effect was observed after a preliminary incubation with Ca2+ at 37 degrees C. Cyclopiazonic acid incubated with the enzyme in the presence of Ca2+ could be eliminated with a Sephadex column. However, the toxin could not be removed when it was incubated with the enzyme in the absence of Ca2+. In the latter case, cyclopiazonic acid was eliminated when the enzyme in the presence of toxin was incubated with Ca2+ at 37 degrees C. Under turnover conditions and in the presence of 10 microM ATP, the toxin-enzyme interaction can be characterized by an apparent Kd of 7 nM. With an ATP concentration of 1 mM, the enzyme was inhibited completely at a toxin/enzyme molar ratio of approximately 10. Furthermore, enzyme activity was observed to recover at a toxin/enzyme molar ratio of 1 when the Ca2+ concentration was raised, which is consistent with the competitive character of cyclopiazonic acid and Ca2+. It is concluded that ATP and Ca2+ can protect against cyclopiazonic acid inhibition.

Site-directed disulfide mapping of helices M4 and M6 in the Ca2+ binding domain of SERCA1a, the Ca2+ ATPase of fast twitch skeletal muscle sarcoplasmic reticulum

In an attempt to define the spatial relationships among SERCA1a transmembrane helices M4, M5, M6, and M8, involved in Ca2+ binding, all six cysteine residues were removed from predicted transmembrane sequences by substitution with Ser or Ala. The cysteine-depleted protein retained 44% of wild type Ca2+ transport activity. Pairs of cysteine residues were then reintroduced to determine whether their juxtaposition would result in the formation of disulfide cross-links between transmembrane helices. In initial studies designed to map the juxtaposition of Ca2+ binding residues, Cys was substituted for Glu309 or Gly310 in transmembrane sequence M4, in combination with the substitution of Cys for Glu771 in M5; for Asn796, Thr799, or Asp800 in M6; or for Glu908 in M8. These double mutants all retained the capacity to form a phosphoenzyme intermediate from Pi (but not from ATP in the presence of Ca2+), and in all but mutants E309C/N796C and G310C/N796C, phosphoenzyme formation was insensitive to 100 microM Ca2+. These results support the view that both Glu309 and Asn796 contribute to Ca2+ binding site II, which is not required for conversion of E2, the substrate for Pi phosphorylation, to E1. Cross-linking in mutants E309C/N796C and G310C/D800C established reference points for the orientation of M4 and M6 relative to each other and provided the basis for the prediction of potential additional cross-links. Strong links were formed with the pairs T317C/A804C and T317C/L807C near the cytoplasmic ends of the two helices and with A305C/L792C and A305C/L793C near the lumenal ends. These combined results support the conclusion that M4 and M6 form a right-handed coiled-coil structure that forms part of the pathway of Ca2+ translocation. In addition to providing a possible explanation for the mutation sensitivity of several pairs of residues in these helices, the proposed association of M4 and M6 supports a new model for the orientation of the two Ca2+ binding sites among transmembrane helices M4, M5, and M6.