Targeting of porin to the outer membrane of Escherichia coli. Rate of trimer assembly and identification of a dimer intermediate

The TAM, a Translocation and Assembly Module for protein assembly and potential conduit for phospholipid transfer

The assembly of β-barrel proteins into the bacterial outer membrane is an essential process enabling the colonization of new environmental niches. The TAM was discovered as a module of the β-barrel protein assembly machinery; it is a heterodimeric complex composed of an outer membrane protein (TamA) bound to an inner membrane protein (TamB). The TAM spans the periplasm, providing a scaffold through the peptidoglycan layer and catalyzing the translocation and assembly of β-barrel proteins into the outer membrane. Recently, studies on another membrane protein (YhdP) have suggested that TamB might play a role in phospholipid transport to the outer membrane. Here we review and re-evaluate the literature covering the experimental studies on the TAM over the past decade, to reconcile what appear to be conflicting claims on the function of the TAM.

Recombinant expression of Yersinia ruckeri outer membrane proteins in Escherichia coli extracellular vesicles

The secretion of extracellular vesicles (EVs) is a common process in Gram-negative bacteria and can be exploited for biotechnological applications. EVs pose a self-adjuvanting, non-replicative vaccine platform, where membrane and antigens are presented to the host immune system in a non-infectious fashion. The secreted quantity of EVs varies between Gram-negative bacterial species and is comparatively high in the model bacterium E. coli. The outer membrane proteins OmpA and OmpF of the fish pathogen Y. ruckeri have been proposed as vaccine candidates to prevent enteric redmouth disease in aquaculture. In this work, Y.ruckeri OmpA or OmpF were expressed in E. coli and recombinant EVs were isolated. To avoid competition between endogenous E. coli OmpA or OmpF, Y. ruckeri OmpA and OmpF were expressed in E. coli strains lacking ompA, ompF, and in a quadruple knockout strain where the four major outer membrane protein genes ompA, ompC, ompF and lamB were removed. Y.ruckeri OmpA and OmpF were successfully expressed in EVs derived from the E. coli mutants as verified by SDS-PAGE, heat modifiability and proteomic analysis using mass-spectrometry. Transmission electron microscopy revealed the presence of EVs in all E. coli strains, and increased EV concentrations were detected when expressing Y. ruckeri OmpA or OmpF in recombinant EVs compared to empty vector controls as verified by nanoparticle tracking analysis. These results show that E. coli can be utilized as a vector for production of EVs expressing outer membrane antigens from Y. ruckeri.

Surveying membrane landscapes: a new look at the bacterial cell surface

Recent studies applying advanced imaging techniques are changing the way we understand bacterial cell surfaces, bringing new knowledge on everything from single-cell heterogeneity in bacterial populations to their drug sensitivity and mechanisms of antimicrobial resistance. In both Gram-positive and Gram-negative bacteria, the outermost surface of the bacterial cell is being imaged at nanoscale; as a result, topographical maps of bacterial cell surfaces can be constructed, revealing distinct zones and specific features that might uniquely identify each cell in a population. Functionally defined assembly precincts for protein insertion into the membrane have been mapped at nanoscale, and equivalent lipid-assembly precincts are suggested from discrete lipopolysaccharide patches. As we review here, particularly for Gram-negative bacteria, the applications of various modalities of nanoscale imaging are reawakening our curiosity about what is conceptually a 3D cell surface landscape: what it looks like, how it is made and how it provides resilience to respond to environmental impacts.

Reconstitution of Bam Complex-Mediated Assembly of a Trimeric Porin into Proteoliposomes

Many integral membrane proteins form oligomeric complexes, but the assembly of these structures is poorly understood. Here, we show that the assembly of OmpC, a trimeric porin that resides in the Escherichia coli outer membrane (OM), can be reconstituted in vitro. Although we observed the insertion of both urea-denatured and in vitro-synthesized OmpC into pure lipid vesicles at physiological pH, the protein assembled only into dead-end dimers. In contrast, in vitro-synthesized OmpC was inserted into proteoliposomes that contained the barrel assembly machinery (Bam) complex, a conserved heterooligomer that catalyzes protein integration into the bacterial OM, and folded into heat-stable trimers by passing through a short-lived dimeric intermediate. Interestingly, complete OmpC assembly was also dependent on the addition of lipopolysaccharide (LPS), a glycolipid located exclusively in the OM. Our results strongly suggest that trimeric porins form through a stepwise process that requires the integration of the protein into the OM in an assembly-competent state. Furthermore, our results provide surprising evidence that interaction with LPS is required not only for trimerization but also for the productive insertion of individual subunits into the lipid bilayer.

Chitoporin from Serratia marcescens: recombinant expression, purification and crystallization

Serratia marcescens is an opportunistic pathogen that commonly causes hospital-acquired infections and can utilize chitin-enriched nutrients as an alternative energy source. This study reports the identification of a chitoporin (ChiP), termed SmChiP, from the outer membrane of S. marcescens. Sequence alignment with genetically characterized ChiPs suggests that SmChiP is more closely related to the monomeric EcChiP from Escherichia coli than to the trimeric VhChiP from Vibrio campbellii. A single crystal of SmChiP grown under the condition 22%(w/v) PEG 8000, 0.1 M calcium acetate, 0.1 M MES pH 6.0 diffracted X-ray synchrotron radiation to 1.85 Å resolution. SmChiP co-crystallized with chitohexaose under the condition 19%(w/v) PEG 1500, 2 M ammonium phosphate monobasic, 0.1 M HEPES pH 7.0 diffracted X-rays to 2.70 Å resolution. Preliminary crystallographic analysis shows that both SmChiP crystal forms contain one molecule per asymmetric unit and that they belong to the tetragonal space groups P42212 and P41212, respectively. The SmChiP crystal has unit-cell parameters a = 82.97, b = 82.97, c = 189.53 Å, α = β = γ = 90°, while the crystal of SmChiP in complex with chitohexaose has unit-cell parameters a = 73.24, b = 73.24, c = 213.46 Å, α = β = γ = 90°. Initial assessment of the complex structure clearly revealed electron density for the sugar ligand. Structure determination of SmChiP in the absence and presence of chitohexaose should reveal the molecular basis of chitin utilization by S. marcescens.

Dynamics of OmpF Trimer Formation in the Bacterial Outer Membrane of Escherichia coli

The self-assembly of outer membrane protein F (OmpF) in the outer membrane of Escherichia coli Gram-negative bacteria was studied using multiscale molecular dynamics simulations. To accommodate the long time scale required for protein assembly, coarse-grained parametrization of E. coli outer membrane lipids was first developed. The OmpF monomers formed stable dimers at specific protein-protein interactions sites irrespective of the lipid membrane environment. The dimer intermediate was asymmetric but provided a template to form a symmetric trimer. Superposition analysis of the self-assembled trimer with the X-ray crystal structure of the trimer available in the protein data bank showed excellent agreement with global root-mean-square deviation of less than 2.2 Å. The free energy change associated with dimer formation was -26 ± 1 kcal mol^-1, and for a dimer to bind to a monomer and to form a trimer yielded -56 ± 4 kcal mol^-1. Based on thermodynamic data, an alternate path to trimer formation via interaction of two dimers is also presented.

Native State Organization of Outer Membrane Porins Unraveled by HDx-MS

Hydrogen-deuterium exchange (HDx) associated with mass spectrometry (MS) is emerging as a powerful tool to provide conformational information about membrane proteins. Unfortunately, as for X-ray diffraction and NMR, HDx performed on reconstituted in vitro systems might not always reflect the in vivo environment. Outer-membrane vesicles naturally released by Escherichia coli were used to carry out analysis of native OmpF through HDx-MS. A new protocol compatible with HDx analysis that avoids hindrance from the lipid contents was setup. The extent of deuterium incorporation was in good agreement with the X-ray diffraction data of OmpF as the buried β-barrels incorporated a low amount of deuterium, whereas the internal loop L3 and the external loops incorporated a higher amount of deuterium. Moreover, the kinetics of incorporation clearly highlights that peptides segregate well in two distinct groups based exclusively on a trimeric organization of OmpF in the membrane: peptides presenting fast kinetics of labeling are facing the complex surrounding environment, whereas those presenting slow kinetics are located in the buried core of the trimer. The data show that HDx-MS applied to a complex biological system is able to reveal solvent accessibility and spatial arrangement of an integral outer-membrane protein complex.

Assessing the Outer Membrane Insertion and Folding of Multimeric Transmembrane β-Barrel Proteins

In addition to the cytoplasmic membrane, Gram-negative bacteria have a second lipid bilayer, the outer membrane, which is the de facto barrier between the cell and the extracellular milieu. Virtually all integral proteins of the outer membrane form β-barrels, which are inserted into the outer membrane by the BAM complex. Some outer membrane proteins, like the porins and trimeric autotransporter adhesins, are multimeric. In the former case, the porin trimer consists of three individual β-barrels, whereas in the latter, the single autotransporter β-barrel domain is formed by three separate polypeptides. This chapter reviews methods to investigate the folding and membrane insertion of multimeric OMPs and further explains the use of a BamA depletion strain to study the effects of the BAM complex on multimeric OMPs in E. coli.

Beyond Saffman-Delbruck approximation: a new regime for 2D diffusion of α-hemolysin complexes in supported lipid bilayer

Cell mechanisms are actively modulated by membrane dynamics. We studied the dynamics of a first-stage biomimetic system by Fluorescence Recovery After Patterned Photobleaching. Using this simple biomimetic system, constituted by α -hemolysin from Staphylococcus aureus inserted as single heptameric pore or complexes of pores in a glass-supported DMPC bilayer, we observed true diffusion behavior, with no immobile fraction. We find two situations: i) when incubation is shorter than 15 hours, the protein inserts as a heptameric pore and diffuses roughly three times more slowly than its host lipid bilayer; ii) incubation longer than 15 hours leads to the formation of larger complexes which diffuse more slowly. Our results indicate that, while the Saffman-Delbruck model adequately describes the diffusion coefficient D for small radii, D of the objects decreases as 1/R(2) for the size range explored in this study. Additionally, in the presence of inserted proteins, the gel-to-fluid transition of the supported bilayer as well as a temperature shift in the gel-to-fluid transition are observed.

Engineered oligomerization state of OmpF protein through computational design decouples oligomer dissociation from unfolding

Biogenesis of β-barrel membrane proteins is a complex, multistep, and as yet incompletely characterized process. The bacterial porin family is perhaps the best-studied protein family among β-barrel membrane proteins that allows diffusion of small solutes across the bacterial outer membrane. In this study, we have identified residues that contribute significantly to the protein-protein interaction (PPI) interface between the chains of outer membrane protein F (OmpF), a trimeric porin, using an empirical energy function in conjunction with an evolutionary analysis. By replacing these residues through site-directed mutagenesis either with energetically favorable residues or substitutions that do not occur in natural bacterial outer membrane proteins, we succeeded in engineering OmpF mutants with dimeric and monomeric oligomerization states instead of a trimeric oligomerization state. Moreover, our results suggest that the oligomerization of OmpF proceeds through a series of interactions involving two distinct regions of the extensive PPI interface: two monomers interact to form a dimer through the PPI interface near G19. This dimer then interacts with another monomer through the PPI interface near G135 to form a trimer. We have found that perturbing the PPI interface near G19 results in the formation of the monomeric OmpF only. Thermal denaturation of the designed dimeric OmpF mutant suggests that oligomer dissociation can be separated from the process of protein unfolding. Furthermore, the conserved site near G57 and G59 is important for the PPI interface and might provide the essential scaffold for PPIs.

The Bam machine: a molecular cooper

The bacterial outer membrane (OM) is an exceptional biological structure with a unique composition that contributes significantly to the resiliency of Gram-negative bacteria. Since all OM components are synthesized in the cytosol, the cell must efficiently transport OM-specific lipids and proteins across the cell envelope and stably integrate them into a growing membrane. In this review, we discuss the challenges associated with these processes and detail the elegant solutions that cells have evolved to address the topological problem of OM biogenesis. Special attention will be paid to the Bam machine, a highly conserved multiprotein complex that facilitates OM β-barrel folding. This article is part of a Special Issue entitled: Protein Folding in Membranes.

The presence of OMP inclusion bodies in a Escherichia coli K-12 mutated strain is not related to lipopolysaccharide structure

The role of lipopolysaccharides (LPSs) in the biogenesis of outer membrane proteins have been investigated in several studies. Some of these analyses showed that LPS is required for correct and efficient folding of outer membrane proteins; other studies support the idea of independence of outer membrane proteins biogenesis from LPS structure. In this article, we investigated the involvement of LPS structure in the anomalous aggregation of outer membrane proteins in a E. coli mutant strain (S17-1(lambdapir)). To achieve this aim, the LPS structure of the mutant strain was carefully determined and compared with the E. coli K-12 one. It turned out that LPS of these two strains differs in the inner core for the absence of a heptose residue (HepIII). We demonstrated that this difference is due to a mutation in waaQ, a gene encoding the transferase for the branch heptose HepIII residue. The mutation was complemented to find out if the restoration of LPS structure influenced the observed outer membrane proteins aggregation. Data reported in this work demonstrated that, in E. coli S17-1(lambdapir) there is no influence of LPS structure on the outer membrane proteins inclusion bodies formation.

Reassembly of an integral oligomeric membrane protein OmpF porin in n-octyl beta-D: -glucopyranoside-lipids mixtures

The denatured monomers of an integral membrane protein OmpF porin were refolded and reassembled into its sodium dodecyl sulfate-resistant trimer in mixtures of n-octyl beta-D: -glucopyranoside and lipids. Effective reassembly was observed with a yield of 60-70% when the denatured monomers (0.1 mg/mL) were solubilized at 25 degrees C for 24 h in a refolding medium (pH 6.9) containing 7 mg/mL n-octyl beta-D: -glucopyranoside, 1 mg/mL sodium dodecyl sulfate and 2-2.5 mg/mL soybean asolectin. The reassembled species was characterized in the presence of sodium dodecyl sulfate by physicochemical methods. Low-angle laser light scattering measurements revealed that the molecular weight of the reassembled species is 115,000 +/- 3,500 which corresponds to that of the trimer of this protein. Circular dichroism spectra suggested that the reassembled species is composed of the same beta-structure as the native one. Synchrotron radiation small-angle X-ray scattering measurements confirmed that the reassembled species is a trimer that has the same compactness as the native one.

Refolding of Escherichia coli outer membrane protein F in detergent creates LPS-free trimers and asymmetric dimers

The Escherichia coli OmpF (outer-membrane protein F; matrix porin) is a homotrimeric beta-barrel and a member of the bacterial porin superfamily. It is the best characterized porin protein, but has resisted attempts to refold it efficiently in vitro. In the present paper, we report the discovery of detergent-based folding conditions, including dodecylglucoside, which can create pure samples of trimeric OmpF. Whereas outer membrane LPS (lipopolysaccharide) is clearly required for in vivo folding, the artificially refolded and LPS-free trimer has properties identical with those of the outer-membrane-derived form. Thus LPS is not required either for in vitro folding or for structural integrity. Dimeric forms of OmpF have been observed in vivo and are proposed to be folding intermediates. In vitro, dimers occur transiently in refolding of trimeric OmpF and, in the presence of dodecylmaltoside, pure dimer can be prepared. This form has less beta-structure by CD and shows lower thermal stability than the trimer. Study of these proteins at the single-molecule level is possible because each OmpF subunit forms a distinct ion channel. Whereas each trimer contains three channels of equal conductance, each dimer always contains two distinct channel sizes. This provides clear evidence that the two otherwise identical monomers adopt different structures in the dimer and indicates that the asymmetric interaction, characteristic of C3 symmetry, is formed at the dimer stage. This asymmetric dimer may be generally relevant to the folding of oligomeric proteins with odd numbers of subunits such as aspartate transcarbamoylase.

Physicochemical characterization of the reassembled dimer of an integral membrane protein OmpF porin

The in vitro reassembled species of OmpF porin, which was renatured from its denatured monomer using n-octyl-beta-D-glucopyranoside, was characterized by low-angle laser light scattering photometry, circular dichroism spectroscopy and synchrotron radiation small-angle X-ray scattering measurements. The light scattering measurement reconfirmed that the reassembled species was the dimer of the protein. Circular dichroism spectra of the reassembled dimer showed a native-like beta-structure. A small-angle X-ray scattering measurement indicated that the size of the reassembled dimer was nearly equal to that of the native trimer under the present experimental conditions. In a thermal denaturation experiment followed by sodium dodecyl sulfate-polyacrylamide gel electrophoresis, the reassembled dimer was less stable than the native trimer.

Role of the pilot protein YscW in the biogenesis of the YscC secretin in Yersinia enterocolitica

The YscC secretin is a major component of the type III protein secretion system of Yersinia enterocolitica and forms an oligomeric structure in the outer membrane. In a mutant lacking the outer membrane lipoprotein YscW, secretion is strongly reduced, and it has been proposed that YscW plays a role in the biogenesis of the secretin. To study the interaction between the secretin and this putative pilot protein, YscC and YscW were produced in trans in a Y. enterocolitica strain lacking all other components of the secretion machinery. YscW expression increased the yield of oligomeric YscC and was required for its outer membrane localization, confirming the function of YscW as a pilot protein. Whereas the pilot-binding site of other members of the secretin family has been identified in the C terminus, a truncated YscC derivative lacking the C-terminal 96 amino acid residues was functional and stabilized by YscW. Pulse-chase experiments revealed that approximately 30 min were required before YscC oligomerization was completed. In the absence of YscW, oligomerization was delayed and the yield of YscC oligomers was strongly reduced. An unlipidated form of the YscW protein was not functional, although it still interacted with the secretin and caused mislocalization of YscC even in the presence of wild-type YscW. Hence, YscW interacts with the unassembled YscC protein and facilitates efficient oligomerization, likely at the outer membrane.

Signal sequence mutations as tools for the characterization of LamB folding intermediates

lamBA23DA25Y and lamBA23YA25Y tether LamB to the inner membrane by blocking signal sequence processing. We isolated suppressors of lamBA23DA25Y and lamBA23YA25Y, all of which mapped within the LamB signal sequence. Most interesting were mutations that changed an amino acid with a strong positive charge to an amino acid with no charge. Further characterization of two such suppressors revealed that they produce functional LamB that is localized to the outer membrane with its entire signal sequence still attached. Biochemical analysis shows that mutant LamB monomer chases into an oligomeric species with properties different from those of wild-type LamB trimer. Because assembly of mutant LamB is slowed, these mutations provide useful tools for the characterization of LamB folding intermediates.

Characterization of the refolding and reassembly of an integral membrane protein OmpF porin by low-angle laser light scattering photometry coupled with high-performance gel chromatography

The refolding and reassembly of an integral membrane protein OmpF porin denatured in sodium dodecylsulfate (SDS) into its stable species by the addition of n-octyl-beta-D-glucopyranoside (OG) have been studied by means of circular dichroism (CD) spectroscopy and low-angle laser light scattering photometry coupled with high-performance gel chromatography. The minimal concentration where change in the secondary structure was induced by the addition of OG was found to be 6.0 mg/ml in CD experiments. A species unfolded further than the SDS-denatured form of this protein was observed at an early stage (5-15 min) of refolding just above the minimal OG concentration. In addition, the CD spectrum of protein species obtained above the minimal OG concentration showed that the protein is composed of a beta-structure which is different from the native structure of this protein. In light scattering experiments, no changes in molecular assemblies were observed when the OG concentration was below its minimal refolding concentration determined by CD measurements. Above the minimal concentration, a compact monomeric species was observed when denatured OmpF porin was incubated for 5 min at 25 degrees C in a refolding medium containing 1 mg/ml SDS and 7 mg/ml OG, and then injected into columns equilibrated with the refolding medium. After an incubation of 24 h before injection into the columns, predominant dimerization of this protein was observed in addition to incorrect aggregation.

Overexpression of protease-deficient DegP(S210A) rescues the lethal phenotype of Escherichia coli OmpF assembly mutants in a degP background

Replacement of OmpF's conserved carboxy-terminal phenylalanine with dissimilar amino acids severely impaired its assembly into stable trimers. In some instances, interactions of mutant proteins with the outer membrane were also affected, as judged by their hypersensitivity phenotype. Synthesis of all mutant OmpF proteins elevated the expression of periplasmic protease DegP, and synthesis of most of them made its presence obligatory for cell viability. These results showed a critical role for DegP in the event of aberrant outer membrane protein assembly. The lethal phenotype of mutant OmpF proteins in a degP null background was eliminated when a protease-deficient DegP(S210A) protein was overproduced. Our data showed that this rescue from lethality and a subsequent increase in mutant protein levels in the envelope did not lead to the proper assembly of the mutant proteins in the outer membrane. Rather, a detergent-soluble and thermolabile OmpF species resembling monomers accumulated in the mutants, and to a lesser extent in the parental strain, when DegP(S210A) was overproduced. Interestingly, this also led to the localization of a significant amount of mutant polypeptides to the inner membrane, where DegP(S210A) also fractionated. These results suggested that the DegP(S210A)-mediated rescue from toxicity involved preferential sequestration of misfolded OmpF monomers from the normal assembly pathway.

MOMP (major outer membrane protein) of Campylobacter jejuni; a versatile pore-forming protein

The great majority of trimeric porins of Gram-negative bacteria cannot be dissociated into monomers without disrupting their folded conformation. The porin of Campylobacter jejuni, however, displays two folded structures, a classical oligomer and a monomer resistant to detergent denaturation. We probed the transition of trimer to monomer using light scattering experiments and examined the secondary structures of these two molecular states by infra-red spectroscopy. The channel-forming properties of both trimer and monomer were studied after incorporation into artificial lipid bilayers. In these conditions, the trimer induced ion channels with a conductance value of 1200 pS in 1 M NaCl. The pores showed marked cationic selectivity and sensitivity to low voltage. Analysis of the isolated monomer showed nearly the same single-channel conductance and the same selectivity and sensitivity to voltage. These results indicate that the folded monomer form of C. jejuni MOMP displays essentially the same pore-forming properties as the native trimer.

Physicochemical evidence that Treponema pallidum TroA is a zinc-containing metalloprotein that lacks porin-like structure

Although TroA (Tromp1) was initially reported to be a Treponema pallidum outer membrane protein with porin-like properties, subsequent studies have suggested that it actually is a periplasmic substrate-binding protein involved in the transport of metals across the treponemal cytoplasmic membrane. Here we conducted additional physicochemical studies to address the divergent viewpoints concerning this protein. Triton X-114 phase partitioning of recombinant TroA constructs with or without a signal sequence corroborated our prior contention that the native protein's amphiphilic behavior is due to its uncleaved leader peptide. Whereas typical porins are trimers with extensive beta-barrel structure, size exclusion chromatography and circular dichroism spectroscopy revealed that TroA was a monomer and predominantly alpha-helical. Neutron activation, atomic absorption spectroscopy, and anomalous X-ray scattering all demonstrated that TroA binds zinc in a 1:1 molar stoichiometric ratio. TroA does not appear to possess structural features consistent with those of bacterial porins.

Targeting and assembly of periplasmic and outer-membrane proteins in Escherichia coli

Escherichia coli must actively transport many of its proteins to extracytoplasmic compartments such as the periplasm and outer membrane. To perform this duty, E. coli employs a collection of Sec (secretion) proteins that catalyze the translocation of various polypeptides through the inner membrane. After translocation across the inner membrane, periplasmic and outer-membrane proteins are folded and targeted to their appropriate destinations. Here we review our knowledge of protein translocation across the inner membrane. We also discuss the various signal transduction systems that monitor extracytoplasmic protein folding and targeting, and we consider how these signal transduction systems may ultimately control these processes.

Folding-based suppression of extracytoplasmic toxicity conferred by processing-defective LamB

We have utilized processing-defective derivatives of the outer membrane maltoporin, LamB, to study protein trafficking functions in the cell envelope of Escherichia coli. Our model proteins contain amino acid substitutions in the consensus site for cleavage by signal peptidase. As a result, the signal sequence is cleaved with reduced efficiency, effectively tethering the precursor protein to the inner membrane. These mutant porins are toxic when secreted to the cell envelope. Furthermore, strains producing these proteins exhibit altered outer membrane permeability, suggesting that the toxicity stems from some perturbation of the cell envelope (J. H. Carlson and T. J. Silhavy, J. Bacteriol. 175:3327-3334, 1993). We have characterized a multicopy suppressor of the processing-defective porins that appears to act by a novel mechanism. Using fractionation experiments and conformation-specific antibodies, we found that the presence of this multicopy suppressor allowed the processing-defective LamB precursors to be folded and localized to the outer membrane. Analysis of the suppressor plasmid revealed that these effects are mediated by the presence of a truncated derivative of the polytopic inner membrane protein, TetA. The suppression mediated by TetA' is independent of the CpxA/CpxR regulon and the sigma E regulon, both of which are involved in regulating protein trafficking functions in the cell envelope.

Peptide-specific antibodies as probes of the topography of the voltage-gated channel in the mitochondrial outer membrane of Neurospora crassa

The voltage-dependent anion-selective channel (VDAC) in mitochondrial outer membranes is formed by a polypeptide (M(r) 31,000) coded by a nuclear gene whose cDNA sequence is known for several organisms. Antibodies have been raised against synthetic peptides corresponding to four different regions in the predicted sequence of the VDAC polypeptide of the fungus Neurospora crassa (residues 1-20, amino terminus; 195-210, 251-268, and 272-283, carboxyl terminus). Specificity of the antibodies has been characterized in terms of binding to peptides or fungal mitochondria on microtiter plates and binding to mitochondrial proteins of several species in Western blots. Reactivity of three of the four antibodies with fungal mitochondria in suspension increases with lysis of outer membranes, indicating that the respective epitopes (including those near the amino and carboxyl termini) are exposed on the surface of the outer membrane that faces inside the mitochondrion. Preincubation of mitochondria with a polyanion that modulates VDAC voltage dependence strongly inhibits binding of the antibody against residues 251-268, whose epitopes are on the outer mitochondrial surface.

Molecular analysis of asmA, a locus identified as the suppressor of OmpF assembly mutants of Escherichia coli K-12

We present the molecular characterization of the asmA gene, whose product is involved in the assembly of outer membrane proteins in Escherichia coli K-12. The asmA locus was initially identified as a site for suppressor mutations of an assembly defective OmpF315. Our data suggest that these suppressor mutations either completely abolish or reduce asmA expression and can be complemented in trans by plasmid clones carrying asmA sequences. The recessive nature of asmA suppressor mutations suggests that the functional AsmA protein participates in inhibiting the assembly of OmpF315 and other mutant OmpFs. As the assembly of wild-type and parental OmpF proteins was not affected by asmA mutations, AsmA must provide an environment refractory only to the assembly of mutant OmpF proteins. However, we cannot completely rule out the possibility that AsmA plays a minor role in the assembly of wild-type and parental OmpF in wild-type cells. The presence of a putative signal sequence within the amino-terminal sequence of AsmA suggests that it is either a periplasmic or an outer membrane protein. This predicted location of AsmA is compatible with its role in the assembly of outer membrane proteins.

Involvement of exposed polypeptide loops in trimeric stability and membrane insertion of Escherichia coli OmpF porin

Different ompF-ompC gene fusions were used to analyse the regions involved in the stable trimerization and membrane insertion of the Escherichia coli OmpF porin. The stability of the trimers formed from the various hybrids was analysed. Three classes of trimer instability are observed related to the presence of different exposed polypeptide loops of OmpF. In all cases, amino acids located between residue 115 and residue 144 of OmpF are necessary to promote a correct and stable trimeric conformation. However, immunogold labelling studies indicate the correct insertion of the protein in the outer membrane despite a marked instability of some hybrid porins. The location of the residues involved in trimer stability is discussed with regards to both the three-dimensional structure and the folding of OmpF.

Assembly of LamB and OmpF in deep rough lipopolysaccharide mutants of Escherichia coli K-12

Assembly of the OmpF and LamB proteins was kinetically retarded in deep rough lipopolysaccharide mutants of Escherichia coli K-12. OmpF assembly was affected at the step of conversion of metastable trimers to stable trimers, whereas LamB assembly was influenced both at the monomer-to-metastable trimer and metastable-to-stable trimer steps. These assembly defects were reversed in the presence of the sfaA1 and sfaB3 suppressor alleles, which were isolated by using ompF assembly mutants.

Hemin uptake in Porphyromonas gingivalis: Omp26 is a hemin-binding surface protein

A 26-kDa outer membrane protein (Omp26) has been proposed to play a role in hemin acquisition by Porphyromonas gingivalis (T. E. Bramanti and S. C. Holt, J. Bacteriol. 174:5827-5839, 1992). We studied [55Fe]hemin uptake in P. gingivalis grown under conditions of hemin starvation (Omp26 expressed on the outer membrane surface) and hemin excess (Omp26 not expressed on surface). [55Fe]hemin uptake occurred rapidly in hemin-starved cells which incorporated up to 70% of total [55Fe]hemin within 3 min. P. gingivalis grown under hemin-starved conditions or treated with the iron chelator 2,2'-bipyridyl to induce an iron stress took up six times more [55Fe]hemin than hemin-excess-grown cells. Polyclonal monospecific anti-Omp26 antibody added to hemin-starved cells inhibited [55Fe]hemin uptake by more than 50%, whereas preimmune serum had no effect. [55Fe]hemin uptake in hemin-starved P. gingivalis was inhibited (36 to 67%) in the presence of equimolar amounts of unlabeled hemin, protoporphyrin IX, zinz protoporphyrin, and Congo red dye but was not inhibited in the presence of non-hemin-containing iron sources. Heat shock treatment (45 degrees C) of hemin-excess-grown P. gingivalis (which cases translocation of Omp26 to the surface) increased [55Fe]hemin uptake by threefold after 3 min in comparison with cells grown at 37 degrees C. However, no [55Fe] hemin uptake beyond 3 min was observed in either hemin-excess-grown or hemin-starved cells exposed to heat shock. In experiments using heterobifunctional cross-linker analysis, hemin and selected porphyrins were cross-linked to Omp26 in hemin-starved P. gingivalis, but no cross-linking was seen with hemin-excess-grown cells. However, cross-linking of hemin to Omp26 was observed after heat shock treatment of hemin-excess-grown cells. Finally, anti-Omp26 antibody inhibited cross-linked of hemin to Omp26. These findings indicate that hemin binding and transport into P.gingivalis cell mediated by Omp26.

The omp2 gene locus of Brucella abortus encodes two homologous outer membrane proteins with properties characteristic of bacterial porins

In Brucella abortus, a gene encoding a major cell envelope protein, omp2, is duplicated within a short segment of the large chromosomal DNA. Although both genes contain open reading frames, encoding proteins of high identity, expression from only one, omp2b, has been detected in laboratory-grown B. abortus. In the present study, we wished to determine whether omp2b encodes the previously studied Brucella porin and to characterize the omp2a gene product. Experiments were performed with Escherichia coli transformants expressing either omp2a or omp2b. Our results indicated that both gene products localized to the outer membrane of E. coli. Initial rates of transport of [14C]maltose and growth rates in the presence of maltodextrins of defined size indicated an increased hydrophilic permeability of transformants expressing omp2a. These cells were also shown to grow on maltotetraose, a molecule with a molecular mass of 667 Da. Activity consistent with the formation of pores could not be demonstrated in transformants expressing omp2b. However, Omp2b formed oligomers resistant to heat denaturation up to 70 degrees C in sodium dodecyl sulfate buffer, a property characteristic of bacterial porins. Overall, these results suggest that the omp2a gene product has pore-forming activity and that the omp2b gene encodes the previously characterized Brucella porin.

Location and unusual membrane topology of the immunity protein of the Escherichia coli phage T4

The immunity protein (Imm) encoded by the Escherichia coli phage T4 effects exclusion of phage superinfecting cells already infected with T4. The 83-residue polypeptide possesses two long lipophilic areas (from residues 3 to 32 and 37 to 65) interrupted by a hydrophilic stretch including two positively charged residues. The charge distribution of the protein very strongly suggested that it is a plasma membrane protein with the C terminus facing the periplasm. While it could be shown that the expected location was correct, fusions of Imm to alkaline phosphatase or beta-galactosidase showed that the C terminus was at the cytosolic side of the membrane. Also, concerning function, there was almost no structural specificity to this part of the protein. Even removal of the two positively charged residues did not completely abolish function. Evidence suggesting that Imm is associated with the membrane at specific sites is presented. It is proposed that Imm is localized to the membrane with the help of a receptor and that, therefore, it does not follow the established rules for the topology of other membrane proteins. The results also suggest that Imm acts indirectly, possibly by altering the conformation of a component of a phage DNA injection site.

OmpF assembly mutants of Escherichia coli K-12: isolation, characterization, and suppressor analysis

This paper describes a novel genetic method used to isolate mutations that alter proper assembly of OmpF in the outer membrane. The thermolabile nature of assembly intermediates allowed selection of temperature-sensitive mutations within the ompF gene. A variant allele of ompF (ompF-Dex) was used because it provided a convenient selectable phenotype (Dex+). Assembly mutants were isolated in two steps. First, amber mutations were obtained that mapped in ompF-Dex. This resulted in a Dex- phenotype. Starting with these Dex- strains, Dex+ revertants were isolated. Mutants that displayed a temperature-sensitive Dex+ phenotype were further characterized. Three such mutants possessed a single substitution within ompF that reverted the nonsense codon to a sense codon which replaced W214 with either an E or Q and Y231 with a Q residue in the mature OmpF protein. All three mutant OmpF proteins showed an assembly defect. This defect led to a substantial reduction in the amount of stable OmpF trimers with the concomitant increase of a high-molecular-weight form of OmpF which migrated at the top of the gel. Suppressor mutations were sought that corrected the assembly defect of OmpF. These extragenic suppressor mutations were mapped at 45 min on the Escherichia coli chromosome. The suppressor mutations displayed no allele specificity and were recessive to the wild-type allele. In the presence of a suppressor, mutant stable trimers appeared in an almost normal manner. The appearance of stable trimers concurred with a substantial loss of the high-molecular-weight OmpF species. At this stage, it is not clear whether the high-molecular-weight species of OmpF is a normal assembly intermediate or a dead-end assembly product. The results presented in this study raise the intriguing possibility of a chaperone-like activity for the wild-type suppressor gene product.

Specific regions of Escherichia coli OmpF protein involved in antigenic and colicin receptor sites and in stable trimerization

Four different mutations were obtained by selecting for resistance to colicin N and screening for continued production of the OmpF protein of Escherichia coli. Two of them also conferred resistance to colicin A. The substitutions C for R-168 (R168C) and E284K caused the loss of the E21 epitope, while the transition G285D altered the E18, E19, and E20 antigenic sites. The substitution G119D drastically affected the stability of the trimeric conformation.

Dynamics of the exposure of epitopes on OmpF, an outer membrane protein of Escherichia coli

The OmpF protein is the major outer membrane trimeric porin of Escherichia coli B. The exposure of several cell-surface-exposed epitopes, that are recognized by various monoclonal antibodies directed against the protein, is investigated. Kinetic analyses show that two epitopes (E18 and E19) appear early during the in-vivo assembly on the folded monomer, just after the removal of the signal peptide, and are conserved in the native trimer. The trimerization that immediately follows or occurs in conjunction with the folding of monomers exposes another antigenic site (E21) at the surface of metastable forms. The binding of nascent lipopolysaccharide promotes the conversion of the heat-modifiable intermediate to a stable trimer and ensures the exposure of E20, E1, E3, E4 and E7. Late epitopes, E1, E3, E4 and E7 are only detected in the outer membrane fraction. These results suggest that different steps induce the sequential exposure of native antigenic sites. The detection of these epitopes depends on conformational changes occurring during the OmpF insertion into the outer membrane.

Porins and specific channels of bacterial outer membranes

Porins and specific channels both produce water-filled pores that allow the transmembrane diffusion of small solutes, but the latter contain specific ligand-binding sites within the channels. Recent structural studies show that many or most of these proteins exist as beta-barrels with the beta-strands traversing the thickness of the outer membrane. The channels often have diameters in the range of 1 nm, and thus the penetration rates of solutes through porin channels are likely to be affected strongly by what appear to be minor differences in the size, shape, hydrophobicity or charge of the solute molecule. With the specific channels, the presence of binding sites can accelerate very significantly the diffusion of some ligands when they are present at low concentrations. Thus these simple channels can sometimes achieve a surprising degree of real or apparent specificity. Recent data tend to favour the idea that these proteins are first exported into the periplasm, and then inserted into the outer membrane. Although lipopolysaccharides seem to play a significant role in the final assembly of the trimeric porins, the details of the targeting process still remain to be elucidated.

Molecular characterization of the 28- and 31-kilodalton subunits of the Legionella pneumophila major outer membrane protein

The major outer membrane protein of Legionella pneumophila exhibits an apparent molecular mass of 100 kDa. Previous studies revealed the oligomer to be composed of 28- and 31-kDa subunits; the latter subunit is covalently bound to peptidoglycan. These proteins exhibit cross-reactivity with polyclonal anti-31-kDa protein serum. In this study, we present evidence to confirm that the 31-kDa subunit is a 28-kDa subunit containing a bound fragment of peptidoglycan. Peptide maps of purified proteins were generated following cyanogen bromide cleavage or proteolysis with staphylococcal V8 protease. A comparison of the banding patterns resulting from sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) revealed a common pattern. Selected peptide fragments were sequenced on a gas phase microsequencer, and the sequence was compared with the sequence obtained for the 28-kDa protein. While the amino terminus of the 31-kDa protein was blocked, peptide fragments generated by cyanogen bromide treatment exhibited a sequence identical to that of the amino terminus of the 28-kDa protein, but beginning at amino acid four (glycine), which is preceded by methionine at the third position. This sequence, (Gly-Thr-Met)-Gly-Pro-Val-Trp-Thr-Pro-Gly-Asn ... , confirms that these proteins have a common amino terminus. An oligonucleotide synthesized from the codons of the common N-terminal amino acid sequence was used to establish by Southern and Northern (RNA) blot analyses that a single gene coded for both proteins. With regard to the putative porin structure, we have identified two major bands at 70 kDa and at approximately 120 kDa by nonreducing SDS-PAGE. The former may represent the typical trimeric motif, while the latter may represent either a double trimer or an aggregate. Analysis of these two forms by two-dimensional SDS-PAGE (first dimensions, nonreducing; second dimensions, reducing) established that both were composed of 31- and 28-kDa subunits cross-linked via interchain disulfide bonds. These studies confirm that the novel L. pneumophila major outer protein is covalently bound to peptidoglycan via a modified 28-kDa subunit (31-kDa anchor protein) and cross-linked to other 28-kDa subunits via interchain disulfide bonds.

Permissive sites and topology of an outer membrane protein with a reporter epitope

We are developing a genetic approach to study with a single antibody the folding and topology of LamB, an integral outer membrane protein from Escherichia coli K-12. This approach consists of inserting the same reporter foreign antigenic determinant (the C3 epitope from poliovirus) at different sites of LamB so that the resulting hybrid proteins have essentially kept the in vivo biological properties of LamB and therefore its cellular location and structure; the corresponding sites are called permissive sites. A specific monoclonal antibody can then be used to examine the position of the reporter epitope with respect to the protein and the membrane. We present an improved and efficient procedure that led us to identify eight new permissive sites in LamB. These sites appear to be distributed on both sides of the membrane. At one of them (after residue 253), the C3 epitope was detected on intact bacteria, providing the first direct argument for exposure of the corresponding LamB region at the cell surface. At this site as well as at four others (after residues 183, 219, 236, and 352), the C3 epitope could be detected with the C3 monoclonal antibody at the surface of the extracted trimeric LamB-C3 hybrid proteins. We provide a number of convergent arguments showing that the hybrid proteins are not strongly distorted with respect to the wild-type protein so that the conclusions drawn are also valid for this protein. These conclusions are essentially in agreement with the proposed folding model for the LamB protein. They agree, in particular, with the idea that regions 183 and 352 are exposed to the periplasm. In addition, they suggest that region 236 is buried at the external face of the outer membrane and that region 219 is exposed to the periplasm. Including the 3 sites previously determined, 11 permissive sites are now available in LamB, including 3 at the cell surface and most probably at least 3 in the periplasm. We discuss the nature of such sites, the generalization of this approach to other proteins, and possible applications.

Lipopolysaccharide structure required for in vitro trimerization of Escherichia coli OmpF porin

Deep rought mutants, which produce very defective lipopolysaccharides, are unable to export normal levels of porins into the outer membrane. In this study, we showed that lipopolysaccharides from such mutants were also unable to facilitate the trimerization, in vitro, of monomeric OmpF porin secreted by spheroplasts of Escherichia coli B/r. In contrast, lipopolysaccharides containing most or all of the core oligosaccharides were able to facilitate trimerization.

Biophysics of the structure and function of porins

Gram-negative bacteria such asEscherichia coli(E. coli) andSalmonella typhimurium(S. typhimurium) have two layers of membranes in the cellular envelope – the cytoplasmic membrane and the outer membrane (Fig. I). Between these membranes is a periplasmic space in which there is a peptidoglycan layer that provides the cells with mechanical rigidity. In this periplasmic space, there are also a variety of hydrolases and binding proteins. The composition of the outer membrane is somewhat unusual. This membrane bilayer is asymmetric, having an inner (periplasmic) leaflet composed of phospholipids and an outer (extracellular) leaflet formed by lipopolysaccharide (LPS). Unlike phospholipids having two acyl chains, LPS has six or seven saturated fatty acid chains (see reviews, Lugtenberg & Van Alphen, 1983; Nikaido & Vaara, 1985; Nakae, 1986). The head groups of LPS have a strong affinity for divalent cations such as Ca2+, and given a sufficient concentration of these ions the outer membrane can form quite a formidable permeability barrier through this head group/salt bridge network (Nikaido & Vaara, 1985). The function of the outer membrane is to serve as a protective envelope against hostile environments such as those in the intestinal tract of animals where harmful and toxic substances - for example, bile salts and various enzymes - are often found. The outer membrane itself would be impermeable to most hydrophilic solutes were it not for the presence of membrane channels. The presence of a large number of pore-forming proteins provides both specific and nonspecific diffusion pathways across the outer membrane for solutes such as nutrients and waste products to diffuse into or out of the cell.

Role of lipopolysaccharide in assembly of Escherichia coli outer membrane proteins OmpA, OmpC, and OmpF

Selection was performed for resistance to a phage, Ox2, specific for the Escherichia coli outer membrane protein OmpA, under conditions which excluded recovery of ompA mutants. All mutants analyzed produced normal quantities of OmpA, which was also normally assembled in the outer membrane. They had become essentially resistant to OmpC and OmpF-specific phages and synthesized these outer membrane porins at much reduced rates. The inhibition of synthesis acted at the level of translation. This was due to the presence of lipopolysaccharides (LPS) with defective core oligosaccharides. Cerulenin blocks fatty acid synthesis and therefore that of LPS. It also inhibits synthesis of OmpC and OmpF but not of OmpA (C. Bocquet-Pagès, C. Lazdunski, and A. Lazdunski, Eur. J. Biochem. 118:105-111, 1981). In the presence of the antibiotic, OmpA synthesis and membrane incorporation remained unaffected at a time when OmpC and OmpF synthesis had almost ceased. The similarity of these results with those obtained with the mutants suggests that normal porin synthesis is not only interfered with by production of mutant LPS but also requires de novo synthesis of LPS. Since synthesis and assembly of OmpA into the outer membrane was not affected in the mutants or in the presence of cerulenin, association of this protein with LPS appears to occur with outer membrane-located LPS.

Associations of Escherichia coli K-12 OmpF trimers with rough and smooth lipopolysaccharides

The associations of both rough and smooth lipopolysaccharides (LPS) with the OmpF porin of Escherichia coli K-12 were examined in galE strains deleted for ompC. Transformation with pSS37 and growth with galactose conferred the ability to assemble a Shigella dysenteriae O antigen onto the core oligosaccharide of E. coli K-12 LPS. The association of LPS with OmpF trimers was assessed by staining, autoradiography of LPS specifically labeled with [1-14C]galactose, and Western immunoblotting with a monoclonal antibody specific for OmpF trimers. These techniques revealed that the migration distances and multiple banding patterns of OmpF porin trimers in sodium dodecyl sulfate-polyacrylamide gels were dictated by the chemotype of associated LPS. Expression of smooth LPS caused almost all of the trimeric OmpF to run in gels with a slower mobility than trimers from rough strains. The LPS associated with trimers from a smooth strain differed from the bulk-phase LPS by consisting almost exclusively of molecules with O antigen.

A genetic engineering approach to study the mode of assembly of the OmpF porin in the envelope of E coli

Inducible hybrid genes encoding two large domains, a periplasmic domain consisting of the PhoS sequence and an outer membrane domain corresponding to various lengths of the OmpF mature sequence were constructed. The synthesized hybrid polypeptides are correctly processed during the early times of induction, their precursor forms being accumulated at later times. These hybrids restore sensitivity toward colicin A to ompF E coli B strain which suggests an outer membrane location. At least 2 of them are indeed localized in the outer membrane after immunogold labelling on ultrathin cryosections. Insertion of a hydrophobic sequence between PhoS and OmpF improves the trimerization and the assembly of the OmpF part. Only the hybrids presenting the last C-terminal 29 residues of OmpF are able to promote the colicin N killing action and to exhibit a trimeric conformation which is recognized by specific antibodies. Moreover, the deletion of the C-terminal region impairs the functional insertion of the OmpF domain; this indicates that the last membrane-spanning region of OmpF is necessary for the correct folding and orientation of the protein in the outer membrane.