An artificial anchor domain: hydrophobicity suffices to stop transfer

Diversification of Phage-Displayed Peptide Libraries with Noncanonical Amino Acid Mutagenesis and Chemical Modification

Sitting on the interface between biologics and small molecules, peptides represent an emerging class of therapeutics. Numerous techniques have been developed in the past 30 years to take advantage of biological methods to generate and screen peptide libraries for the identification of therapeutic compounds, with phage display being one of the most accessible techniques. Although traditional phage display can generate billions of peptides simultaneously, it is limited to expression of canonical amino acids. Recently, several groups have successfully undergone efforts to apply genetic code expansion to introduce noncanonical amino acids (ncAAs) with novel reactivities and chemistries into phage-displayed peptide libraries. In addition to biological methods, several different chemical approaches have also been used to install noncanonical motifs into phage libraries. This review focuses on these recent advances that have taken advantage of both biological and chemical means for diversification of phage libraries with ncAAs.

Development, Validation, and Applications of Nonbonded Interaction Parameters between Coarse-Grained Amino Acid and Water Models

Interactions between amino acids and water play an important role in determining the stability and folding/unfolding, in aqueous solution, of many biological macromolecules, which affects their function. Thus, understanding the molecular-level interactions between water and amino acids is crucial to tune their function in aqueous solutions. Herein, we have developed nonbonded interaction parameters between the coarse-grained (CG) models of 20 amino acids and the one-site CG water model. The nonbonded parameters, represented using the 12-6 Lennard Jones (LJ) potential form, have been optimized using an artificial neural network (ANN)-assisted particle swarm optimization (PSO) (ANN-assisted PSO) method. All-atom (AA) molecular dynamics (MD) simulations of dipeptides in TIP3P water molecules were performed to calculate the Gibbs hydration free energies. The nonbonded force-field (FF) parameters between CG amino acids and the one-site CG water model were developed to accurately reproduce these energies. Furthermore, to test the transferability of these newly developed parameters, we calculated the hydration free energies of the analogues of the amino acid side chains, which showed good agreement with reported experimental data. Additionally, we show the applicability of these models by performing self-assembly simulations of peptide amphiphiles. Overall, these models are transferable and can be used to study the self-assembly of various biomaterials and biomolecules to develop a mechanistic understanding of these processes.

Screening for New Surface Anchoring Domains for Lactococcus lactis

The display of recombinant proteins on bacterial surfaces is a developing research area with a wide range of potential biotechnological applications. The lactic acid bacterium Lactococcus lactis is an attractive host for such surface display, and a promising vector for in vivo delivery of bioactive proteins. Surface-displayed recombinant proteins are usually anchored to the bacterial cell wall through anchoring domains. Here, we investigated alternatives to the commonly applied lactococcal lysine motif (LysM)-containing surface anchoring domain, the C-terminus of AcmA (cAcmA). We screened 15 anchoring domains of lactococcal or phage origins that belong to the Pfam categories LPXTG, LysM, CW_1, Cpl-7, WxL, SH3, and ChW, which can provide non-covalent or covalent binding to the cell wall. LPXTG, LysM, the duplicated CW_1 and SH3 domains promoted significant surface display of two model proteins, B domain and DARPin I07, although the display achieved was lower than that for the reference anchoring domain, cAcmA. On the other hand, the ChW-containing anchoring domain of the lactococcal phage AM12 endolysin (cAM12) demonstrated surface display comparable to that of cAcmA. The anchoring ability of cAM12 was confirmed by enabling non-covalent heterologous anchoring of the B domain on wild-type bacteria, as well as anchoring of CXCL8-binding evasin-3, which provided potential therapeutic applicability; both were displayed to an extent comparable to that of cAcmA. We have thereby demonstrated the effective use of different protein anchoring domains in L. lactis, with ChW-containing cAM12 the most promising alternative to the established approaches for surface display on L. lactis.

Filamentous Phage: Structure and Biology

Ff filamentous phage (fd, M13 and f1) of Escherichia coli have been the workhorse of phage display technology for the past 30 years. Dominance of Ff over other bacteriophage in display technology stems from the titres that are about 100-fold higher than any other known phage, efficacious transformation ensuring large library size and superior stability of the virion at high temperatures, detergents and pH extremes, allowing broad range of biopanning conditions in screening phage display libraries. Due to the excellent understanding of infection and assembly requirements, Ff phage have also been at the core of phage-assisted continual protein evolution strategies (PACE). This chapter will give an overview of the Ff filamentous phage structure and biology, emphasizing those properties of the Ff phage life cycle and virion that are pertinent to phage display applications.

The Sec translocase

The vast majority of proteins trafficking across or into the bacterial cytoplasmic membrane occur via the translocon. The translocon consists of the SecYEG complex that forms an evolutionarily conserved heterotrimeric protein-conducting membrane channel that functions in conjunction with a variety of ancillary proteins. For posttranslational protein translocation, the translocon interacts with the cytosolic motor protein SecA that drives the ATP-dependent stepwise translocation of unfolded polypeptides across the membrane. For the cotranslational integration of membrane proteins, the translocon interacts with ribosome-nascent chain complexes and membrane insertion is coupled to polypeptide chain elongation at the ribosome. These processes are assisted by the YidC and SecDF(yajC) complex that transiently interacts with the translocon. This review summarizes our current understanding of the structure-function relationship of the translocon and its interactions with ancillary components during protein translocation and membrane protein insertion. This article is part of a Special Issue entitled Protein translocation across or insertion into membranes.

Stop-transfer regions do not halt translocation of proteins into chloroplasts

Protein targeting in eukaryotic cells is determined by several topogenic signals. Among these are stop-transfer regions, which halt translocation of proteins across the endoplasmic reticulum membrane. Two different stop-transfer regions were incorporated into precursors for a chloroplast protein, the small subunit of ribulose-1,5-bisphosphate carboxylase/oxygenase. Both chimeric proteins were imported into chloroplasts and did not accumulate in the envelope membranes. Thus, the stop-transfer signals did not function during chloroplast protein import. These observations support the hypothesis that the mechanism for translocation of proteins across the chloroplast envelope is significantly different from that for translocation across the endoplasmic reticulum membrane.

The hydrophobic core of the Sec61 translocon defines the hydrophobicity threshold for membrane integration

Mutation of the apolar constriction of the yeast Sec61 translocon to polar or charged residues, while retaining functionality, affected the integration of potential transmembrane segments into the lipid bilayer. This indicates that the translocon plays an active role in setting the hydrophobicity threshold for membrane integration.

The Sec61 translocon mediates the translocation of proteins across the endoplasmic reticulum membrane and the lateral integration of transmembrane segments into the lipid bilayer. The structure of the idle translocon is closed by a lumenal plug domain and a hydrophobic constriction ring. To test the function of the apolar constriction, we have mutated all six ring residues of yeast Sec61p to more hydrophilic, bulky, or even charged amino acids (alanines, glycines, serines, tryptophans, lysines, or aspartates). The translocon was found to be surprisingly tolerant even to the charge mutations in the constriction ring, because growth and translocation efficiency were not drastically affected. Most interestingly, ring mutants were found to affect the integration of hydrophobic sequences into the lipid bilayer, indicating that the translocon does not simply catalyze the partitioning of potential transmembrane segments between an aqueous environment and the lipid bilayer but that it also plays an active role in setting the hydrophobicity threshold for membrane integration.

Localization of the Carnation Italian ringspot virus replication protein p36 to the mitochondrial outer membrane is mediated by an internal targeting signal and the TOM complex

BACKGROUND

Carnation Italian ringspot virus (CIRV) is a positive-strand RNA virus that causes massive structural alterations of mitochondria in infected host cells, the most conspicuous being the formation of numerous internal vesicles/spherules that are derived from the mitochondrial outer membrane and serve as the sites for viral RNA replication. While the membrane-bound components of the CIRV replication complex, including a 36-kD RNA-binding protein (p36), are known to be essential for these changes in mitochondrial morphology and are relatively well characterized in terms of their roles in nascent viral RNA synthesis, how these proteins are specifically targeted and inserted into mitochondria is poorly defined.

RESULTS

Here we report on the molecular signal responsible for sorting p36 to the mitochondrial outer membrane. Using a combination of gain-of-function assays with portions of p36 fused to reporter proteins and domain-swapping assays with p36 and another closely-related viral RNA-binding protein, p33, that sorts specifically to the peroxisomal boundary membrane, we show that the mitochondrial targeting information in p36 resides within its two transmembrane domains (TMDs) and intervening hydrophilic loop sequence. Comprehensive mutational analysis of these regions in p36 revealed that the primary targeting determinants are the moderate hydrophobicity of both TMDs and the positively-charged face of an amphipathic helix within the intervening loop sequence. We show also using bimolecular fluorescence complementation (BiFC) that p36 interacts with certain components of the translocase complex in the mitochondrial outer membrane (TOM), but not with the sorting and assembly machinery (SAM).

CONCLUSION

Our results provide insight to how viruses, such as CIRV, exploit specific host-cell protein sorting pathways to facilitate their replication. The characterization of the targeting and insertion of p36 into the mitochondrial outer membrane also sheds light on the mechanisms involved in sorting of host-cell membrane proteins to mitochondria, a process that has been largely unexplored in plants.

Mechanism and hydrophobic forces driving membrane protein insertion of subunit II of cytochrome bo 3 oxidase

Subunit II (CyoA) of cytochrome bo(3) oxidase, which spans the inner membrane twice in bacteria, has several unusual features in membrane biogenesis. It is synthesized with an amino-terminal cleavable signal peptide. In addition, distinct pathways are used to insert the two ends of the protein. The amino-terminal domain is inserted by the YidC pathway whereas the large carboxyl-terminal domain is translocated by the SecYEG pathway. Insertion of the protein is also proton motive force (pmf)-independent. Here we examined the topogenic sequence requirements and mechanism of insertion of CyoA in bacteria. We find that both the signal peptide and the first membrane-spanning region are required for insertion of the amino-terminal periplasmic loop. The pmf-independence of insertion of the first periplasmic loop is due to the loop's neutral net charge. We observe also that the introduction of negatively charged residues into the periplasmic loop makes insertion pmf dependent, whereas the addition of positively charged residues prevents insertion unless the pmf is abolished. Insertion of the carboxyl-terminal domain in the full-length CyoA occurs by a sequential mechanism even when the CyoA amino and carboxyl-terminal domains are swapped with other domains. However, when a long spacer peptide is added to increase the distance between the amino-terminal and carboxyl-terminal domains, insertion no longer occurs by a sequential mechanism.

Chlorophylls, ligands and assembly of light-harvesting complexes in chloroplasts

Chlorophyll (Chl) b serves an essential function in accumulation of light-harvesting complexes (LHCs) in plants. In this article, this role of Chl b is explored by considering the properties of Chls and the ligands with which they interact in the complexes. The overall properties of the Chls, not only their spectral features, are altered as consequences of chemical modifications on the periphery of the molecules. Important modifications are introduction of oxygen atoms at specific locations and reduction or desaturation of sidechains. These modifications influence formation of coordination bonds by which the central Mg atom, the Lewis acid, of Chl molecules interacts with amino acid sidechains, as the Lewis base, in proteins. Chl a is a versatile Lewis acid and interacts principally with imidazole groups but also with sidechain amides and water. The 7-formyl group on Chl b withdraws electron density toward the periphery of the molecule and consequently the positive Mg is less shielded by the molecular electron cloud than in Chl a. Chl b thus tends to form electrostatic bonds with Lewis bases with a fixed dipole, such as water and, in particular, peptide backbone carbonyl groups. The coordination bonds are enhanced by H-bonds between the protein and the 7-formyl group. These additional strong interactions with Chl b are necessary to achieve assembly of stable LHCs.

Eliminating helper phage from phage display

Phage display technology involves the display of proteins or peptides, as coat protein fusions, on the surface of a phage or phagemid particles. Using standard technology, helper phage are essential for the replication and assembly of phagemid particles, during library production and biopanning. We have eliminated the need to add helper phage by using 'bacterial packaging cell lines' that provide the same functions. These cell lines contain M13-based helper plasmids that express phage packaging proteins which assemble phagemid particles as efficiently as helper phage, but without helper phage contamination. This results in genetically pure phagemid particle preparations. Furthermore, by using constructs differing in the form of gene 3 that they contain, we have shown that the display, from a single library, can be modulated between monovalent (phagemid-like) and multivalent display (phage-like) without any further engineering. These packaging cells eliminate the use of helper phage from phagemid-based selection protocols; reducing the amount of technical preparation, facilitating automation, optimizing selections by matching display levels to diversity, and effectively using the packaged phagemid particles as means to transfer genetic information at an efficiency approaching 100%.

The cytoplasmic C-terminal domain of the Escherichia coli KdpD protein functions as a K+ sensor

The KdpD protein is a K(+) sensor kinase located in the cytoplasmic membrane of Escherichia coli. It contains four transmembrane stretches and two short periplasmic loops of 4 and 10 amino acid residues, respectively. To determine which part of KdpD functions as a K(+) sensor, genetic variants were constructed with truncations or altered arrangements of the transmembrane segments. All KdpD constructs were tested by complementation of an E. coli kdpD deletion strain for their ability to grow at a K(+) concentration of 0.1 mM in the medium. A soluble protein composed of the C-terminal cytoplasmic domain was able to complement the kdpD deletion strain. In addition, analysis of the beta-galactosidase activity of an E. coli strain which carries a transcriptional fusion of the upstream region of the kdpFABC operon and a promoterless lacZ gene revealed that this soluble KdpD mutant responds to changes in the K(+) concentration in the extracellular medium. The results suggest that the sensing and response functions are both located in the C-terminal domain and might be modulated by the N-terminal domain as well as by membrane anchoring.

Unlocking of the Filamentous Bacteriophage Virion During Infection is Mediated by the C Domain of pIII

Protein III (pIII) of filamentous phage is required for both the beginning and the end of the phage life cycle. The infection starts by binding of the N-terminal N2 and N1 domains to the primary and secondary host receptors, F pilus and TolA protein, respectively, whereas the life cycle terminates by the C-terminal domain-mediated release of the membrane-anchored virion from the cell. It has been assumed that the role of the C-terminal domain of pIII in the infection is that of a tether for the receptor-binding domains N1N2 to the main body of the virion. In a poorly understood process that follows receptor binding, the virion disassembles as its protein(s) become integrated into the host inner membrane, resulting in the phage genome entry into the bacterial cytoplasm. To begin revealing the mechanism of this process, we showed that tethering the functional N1N2 receptor-binding domain to the virion via termination-incompetent C domain abolishes infection. This infection defect cannot be complemented by in trans supply of the functional C domain. Therefore, the C domain of pIII acts in concert with the receptor-binding domains to mediate the post receptor binding events in the infection. Based on these findings, we propose a model in which binding of the N1 domain to the periplasmic portion of TolA, the secondary receptor, triggers in cis a conformational change in the C domain, and that this change opens or unlocks the pIII end of the virion, allowing the entry phase of infection to proceed. To our knowledge, this is the first virus that uses the same protein domain both for the insertion into and release from the host membrane.

Membrane integration of E. coli model membrane proteins

The molecular events of membrane translocation and insertion have been investigated using a number of different model proteins. Each of these proteins has specific features that allow interaction with the membrane components which ensure that the proteins reach their specific local destination and final conformation. This review will give an overview on the best-characterized proteins studied in the bacterial system and emphasize the distinct aspects of the pathways.

Translocon "pulling" of nascent SecM controls the duration of its translational pause and secretion-responsive secA regulation

SecA is an ATPase and motor protein that drives protein translocation across the bacterial plasma membrane. In Escherichia coli SecA levels are regulated by the secretion needs of the cell utilizing secM, which encodes a secreted protein. Previous studies demonstrated that this regulation requires a translational pause within secM, whose duration regulates the accessibility of the secA Shine-Dalgarno sequence on secM secA mRNA. Here we provide evidence that translocon "pulling" of nascent SecM is what regulates the duration of the secM translational pause, and thus secA expression levels, thereby providing direct support for this model.

Assembly of colicin A in the outer membrane of producing Escherichia coli cells requires both phospholipase A and one porin, but phospholipase A is sufficient for secretion

Three oligomeric forms of colicin A with apparent molecular masses of about 95 to 98 kDa were detected on sodium dodecyl sulfate (SDS)-polyacrylamide gels loaded with unheated samples from colicin A-producing cells of Escherichia coli. These heat-labile forms, called colicins Au, were visualized both on immunoblots probed with monoclonal antibodies against colicin A and by radiolabeling. Cell fractionation studies show that these forms of colicin A were localized in the outer membrane whether or not the producing cells contained the cal gene, which encodes the colicin A lysis protein responsible for colicin A release in the medium. Pulse-chase experiments indicated that their assembly into the outer membrane, as measured by their heat modifiable migration in SDS gels, was an efficient process. Colicins Au were produced in various null mutant strains, each devoid of one major outer membrane protein, except in a mutant devoid of both OmpC and OmpF porins. In cells devoid of outer membrane phospholipase A (OMPLA), colicin A was not expressed. Colicins Au were detected on immunoblots of induced cells probed with either polyclonal antibodies to OmpF or monoclonal antibodies to OMPLA, indicating that they were associated with both OmpF and OMPLA. Similar heat-labile forms were obtained with various colicin A derivatives, demonstrating that the C-terminal domain of colicin A, but not the hydrophobic hairpin present in this domain, was involved in their formation.

Delineating the site of interaction on the pIII protein of filamentous bacteriophage fd with the F-pilus of Escherichia coli

The minor coat protein pIII at one end of the filamentous bacteriophage fd, mediates the infection of Escherichia coli cells displaying an F-pilus. pIII has three domains (D1, D2 and D3), terminating with a short hydrophobic segment at the C-terminal end. Domain D2 binds to the tip of F-pilus, which is followed by retraction of the pilus and penetration of the E. coli cell membrane, the latter involving an interaction between domain D1 and the TolA protein in the membrane. Surface residues on the D2 domain of pIII were replaced systematically with alanine. Mutant virions were screened for D2-pilus interaction in vivo by measuring the release of infectious virions from E. coli F(+) cells infected with the mutants. A competitive ELISA was developed to measure in vitro the ability of mutant phages to bind to purified pili. This allowed the identification of amino acid residues involved in binding to F and to EDP208 pili. These residues were found to cluster on the outer rim of the 3D structure of the D2 domain, unexpectedly identifying this as the F-pilus binding region on the pIII protein.

Cloning of the Streptococcus mutans gene encoding glucan binding protein B and analysis of genetic diversity and protein production in clinical isolates

Streptococcus mutans, the primary etiological agent of dental caries, produces several activities that promote its accumulation within the dental biofilm. These include glucosyltransferases, their glucan products, and proteins that bind glucan. At least three glucan binding proteins have been identified, and GbpB, the protein characterized in this study, appears to be novel. The gbpB gene was cloned and the predicted protein sequence contained several unusual features and shared extensive homology with a putative peptidoglycan hydrolase from group B streptococcus. Examination of gbpB genes from clinical isolates of S. mutans revealed that DNA polymorphisms, and hence amino acid changes, were limited to the central region of the gene, suggesting functional conservation within the amino and carboxy termini of the protein. The GbpB produced by clinical isolates and laboratory strains showed various distributions between cells and culture medium, and amounts of protein produced by individual strains correlated positively with their ability to grow as biofilms in an in vitro assay.

An investigation into the membrane-interactive potential of the Escherichia coli KpsE C-terminus

Membrane binding via C-terminal amphiphilic alpha-helical structure is a novel anchoring mechanism, which has been characterised in a number of prokaryotic carboxypeptidases. Here, we have used graphical and DWIH analyses to ascertain if a similar anchoring mechanism may be utilised by the Escherichia coli KpsE protein in its binding to the periplasmic face of the inner membrane. The results of these analyses have been compared to those obtained for similar analyses of the C-terminal sequences of E. coli penicillin-binding proteins (PBPs) PBP5 and PBP6 which, are known to function as amphiphilic alpha-helical membrane anchors, and of melittin, a known membrane-interactive toxin. We have also used FTIR spectroscopy and lipid phase transition temperature analysis to investigate the interaction of a peptide homologue of KpsE C-terminal region with membrane lipid. Our results suggest that the KpsE C-terminal sequence has the potential to form an amphiphilic alpha-helix and that this alpha-helix could feature in the membrane binding of the protein.

Evolutionarily related insertion pathways of bacterial, mitochondrial, and thylakoid membrane proteins

The inner membranes of eubacteria and mitochondria, as well as the chloroplast thylakoid membrane, contain essential proteins that function in oxidative phosphorylation and electron transport processes or in photosynthesis. Because most of the organellar proteins are nuclear encoded, they are synthesized in the cytoplasm and subsequently imported into the organelle before they are inserted into the membrane. This review focuses on the pathways of protein insertion into the inner membrane of eubacteria and mitochondria and into the chloroplast thylakoid membrane. In many respects, insertion of proteins into the inner membrane of bacteria is a process similar to that used by proteins of the thylakoid membrane. In both of these systems a signal recognition particle (SRP) and a SecYE-translocase are involved, as in translocation into the endoplasmic reticulum. The pathway of proteins into the mitochondrial membranes appears to be different in that it involves no SecYE-like components. A conservative pathway, recently identified in mitochondria, involves the Oxa1 protein for the insertion of proteins from the matrix. The presence of Oxa1 homologues in eubacteria and chloroplasts suggests that this pathway is evolutionarily conserved.

Identification of sequence determinants that direct different intracellular folding pathways for aquaporin-1 and aquaporin-4

Homologous aquaporin water channels utilize different folding pathways to acquire their transmembrane (TM) topology in the endoplasmic reticulum (ER). AQP4 acquires each of its six TM segments via cotranslational translocation events, whereas AQP1 is initially synthesized with four TM segments and subsequently converted into a six membrane-spanning topology. To identify sequence determinants responsible for these pathways, peptide segments from AQP1 and AQP4 were systematically exchanged. Chimeric proteins were then truncated, fused to a C-terminal translocation reporter, and topology was analyzed by protease accessibility. In each chimeric context, TM1 initiated ER targeting and translocation. However, AQP4-TM2 cotranslationally terminated translocation, while AQP1-TM2 failed to terminate translocation and passed into the ER lumen. This difference in stop transfer activity was due to two residues that altered both the length and hydrophobicity of TM2 (Asn(49) and Lys(51) in AQP1 versus Met(48) and Leu(50) in AQP4). A second peptide region was identified within the TM3-4 peptide loop that enabled AQP4-TM3 but not AQP1-TM3 to reinitiate translocation and cotranslationally span the membrane. Based on these findings, it was possible to convert AQP1 into a cotranslational biogenesis mode similar to that of AQP4 by substituting just two peptide regions at the N terminus of TM2 and the C terminus of TM3. Interestingly, each of these substitutions disrupted water channel activity. These data thus establish the structural basis for different AQP folding pathways and provide evidence that variations in cotranslational folding enable polytopic proteins to acquire and/or maintain primary sequence determinants necessary for function.

The assembly pathway of outer membrane protein PhoE of Escherichia coli

The assembly of the wild-type and several mutant forms of the trimeric outer membrane porin PhoE of Escherichia coli was investigated in vitro and in vivo. In in vivo pulse-chase experiments, approximately half of the wild-type PhoE molecules assembled within the 30-s pulse in the native conformation in the cell envelope. The other half of the molecules followed slower kinetics, and three intermediates in this multistep assembly process were detected: a soluble trypsin-sensitive monomer, a trypsin-sensitive monomeric form that was loosely associated with the cell envelope and a metastable trimer, which was integrated into the membranes and converted to the stable trimeric configuration within minutes. The metastable trimers disassembled during sample preparation for standard SDS/PAGE into folded monomers. In vitro, the isolated PhoE protein could efficiently be folded in the presence of N,N-dimethyldodecylamine-N-oxide (LDAO). A mutant PhoE protein, DeltaF330, which lacks the C-terminal phenylalanine residue, mainly followed the slower kinetic pathway observed in vivo, resulting in increased amounts of the various assembly intermediates. It appears that the DeltaF330 mutant protein is intrinsically able to fold, because it was able to fold in vitro with LDAO with similar efficiencies as the wild-type protein. Therefore, we propose that the conserved C-terminal Phe is (part of) a sorting signal, directing the protein efficiently to the outer membrane. Furthermore, we analysed a mutant protein with a hydrophilic residue introduced at the hydrophobic side of one of the membrane-spanning amphipathic beta strands. The assembly of this mutant protein was not affected in vivo or in vitro in the presence of LDAO. However, it was not able to form folded monomers in a previously established in vitro folding system, which requires the presence of lipopolysaccharides and Triton. Hence, a folded monomer might not be a true assembly intermediate of PhoE in vivo.

The sorting signals for peroxisomal membrane-bound ascorbate peroxidase are within its C-terminal tail

Peroxisomal ascorbate peroxidase (APX) is a carboxyl tail-anchored, type II (N(cytosol)-C(matrix)) integral membrane protein that functions in the regeneration of NAD(+) in glyoxysomes of germinated oilseeds and protection of peroxisomes in other organisms from toxic H(2)O(2). Recently we showed that cottonseed peroxisomal APX was sorted post-translationally from the cytosol to peroxisomes via a novel reticular/circular membranous network that was interpreted to be a subdomain of the endoplasmic reticulum (ER), named peroxisomal ER (pER). Here we report on the molecular signals responsible for sorting peroxisomal APX. Deletions or site-specific substitutions of certain amino acid residues within the hydrophilic C-terminal-most eight-amino acid residues (includes a positively charged domain found in most peroxisomal integral membrane-destined proteins) abolished sorting of peroxisomal APX to peroxisomes via pER. However, the C-terminal tail was not sufficient for sorting chloramphenicol acetyltransferase to peroxisomes via pER, whereas the peptide plus most of the immediately adjacent 21-amino acid transmembrane domain (TMD) of peroxisomal APX was sufficient for sorting. Replacement of the peroxisomal APX TMD with an artificial TMD (devoid of putative sorting sequences) plus the peroxisomal APX C-terminal tail also sorted chloramphenicol acetyltransferase to peroxisomes via pER, indicating that the peroxisomal APX TMD does not possess essential sorting information. Instead, the TMD appears to confer the proper context required for the conserved positively charged domain to function within peroxisomal APX as an overlapping pER sorting signal and a membrane peroxisome targeting signal type 2.

The net charge of the first 18 residues of the mature sequence affects protein translocation across the cytoplasmic membrane of gram-negative bacteria

This statistical study shows that in proteins of gram-negative bacteria exported by the Sec-dependent pathway, the first 14 to 18 residues of the mature sequences have the highest deviation between the observed and expected net charge distributions. Moreover, almost all sequences have either neutral or negative net charge in this region. This rule is restricted to gram-negative bacteria, since neither eukaryotic nor gram-positive bacterial exported proteins have this charge bias. Subsequent experiments performed with a series of Escherichia coli alkaline phosphatase mutants confirmed that this charge bias is associated with protein translocation across the cytoplasmic membrane. Two consecutive basic residues inhibit translocation effectively when placed within the first 14 residues of the mature protein but not when placed in positions 19 and 20. The sensitivity to arginine partially reappeared again 30 residues away from the signal sequence. These data provide new insight into the mechanism of protein export in gram-negative bacteria and lead to practical recommendations for successful secretion of hybrid proteins.

Cloning and characterisation of the Pasteurella multocida ahpA gene responsible for a haemolytic phenotype in Escherichia coli

Haemolysins are membrane-damaging agents which have been described as bacterial virulence factors due to their ability to lyse erythrocytes and other host cells, and therefore inducing a greater inflammatory response (Elliott et al., 1998). Pasteurella multocida was found to be haemolytic under anaerobic conditions. In this study, we cloned and characterised a P. multocida gene, designated ahpA, which conferred a haemolytic phenotype on Escherichia coli when incubated under anaerobic conditions. A deletion was introduced into the ahpA open reading frame which abolished the haemolytic phenotype. The clone containing ahpA showed erythrocyte specificity, causing haemolysis of bovine and equine erythrocytes, and demonstrated weak haemolysis on ovine erythrocytes. Upon further investigation, AhpA was found to affect the expression of the E. coli K-12 latent haemolysin, SheA, under anaerobic conditions.

Surface proteins of gram-positive bacteria and mechanisms of their targeting to the cell wall envelope

The cell wall envelope of gram-positive bacteria is a macromolecular, exoskeletal organelle that is assembled and turned over at designated sites. The cell wall also functions as a surface organelle that allows gram-positive pathogens to interact with their environment, in particular the tissues of the infected host. All of these functions require that surface proteins and enzymes be properly targeted to the cell wall envelope. Two basic mechanisms, cell wall sorting and targeting, have been identified. Cell well sorting is the covalent attachment of surface proteins to the peptidoglycan via a C-terminal sorting signal that contains a consensus LPXTG sequence. More than 100 proteins that possess cell wall-sorting signals, including the M proteins of Streptococcus pyogenes, protein A of Staphylococcus aureus, and several internalins of Listeria monocytogenes, have been identified. Cell wall targeting involves the noncovalent attachment of proteins to the cell surface via specialized binding domains. Several of these wall-binding domains appear to interact with secondary wall polymers that are associated with the peptidoglycan, for example teichoic acids and polysaccharides. Proteins that are targeted to the cell surface include muralytic enzymes such as autolysins, lysostaphin, and phage lytic enzymes. Other examples for targeted proteins are the surface S-layer proteins of bacilli and clostridia, as well as virulence factors required for the pathogenesis of L. monocytogenes (internalin B) and Streptococcus pneumoniae (PspA) infections. In this review we describe the mechanisms for both sorting and targeting of proteins to the envelope of gram-positive bacteria and review the functions of known surface proteins.

Antitumor Response Elicited by a Superantigen- Transmembrane Sequence Fusion Protein Anchored onto Tumor Cells

Superantigens stimulate T cells bearing certain TCR β-chain variable regions when bound to MHC II molecules. We investigated whether the superantigen toxic shock syndrome toxin-1 (TSST1) could induce an antitumor immune response when anchored onto MHC II-negative tumor cells. Our approach was to facilitate association of TSST1 with cell membranes by fusing its coding region to the transmembrane region (TM) sequence of the proto-oncogene c-erb-B-2. TSST1-TM was expressed in bacteria with an N-terminal histidine tag and purified using nickel-agarose affinity chromatography. Purified TSST1-TM added to cultures of several different MHC II-negative tumor cells spontaneously associated with cell membranes, as detected by flow cytometry. Because superantigens can direct cell-mediated cytotoxicity against MHC II-positive cells, a TM fusion protein lacking the TSST1 MHC II binding domain (TSST88–194-TM) was also constructed. Tumor cells precoated with TSST1-TM or TSST88–194-TM stimulated proliferation of human peripheral blood lymphocytes in vitro whereas uncoated tumor cells did not. Mice preimmunized with TSST1-TM- or TSST88–194-TM-coated tumor cells mounted a systemic response that resulted in significant antitumor immunity as measured by regression of a parental tumor challenge. TSST1-TM and TSST88–194-TM fusion proteins represent a useful new strategy for attaching superantigens or potentially other proteins onto tumor cell surfaces without genetic manipulation.

An alternative first exon in the distal end of the erythroid ankyrin gene leads to production of a small isoform containing an NH2-terminal membrane anchor

Mouse erythroid ankyrin is encoded by the Ank1 gene on Chromosome 8. The best studied isoform is 210 kDa and contains three large functional domains. We have recently reported a small Ank1 isoform (relative mobility 25 kDa) that localizes to the M and Z lines in skeletal muscle. Analyses of cDNA and genomic clones show that three transcripts of 3.5, 2.0, and 1.6 kb code for this protein. The different transcript sizes are due to their 3'-untranslated regions. They are encoded by a new first exon located in intron 39 of the Ank1 gene and three previously described Ank1 exons (40, 41, and 42). The 5'-flanking region contains a putative muscle-specific promoter. The sequence of the first 72 amino acids is novel and is predicted to form a transmembrane helix at the NH2-terminus. Functional testing of the putative transmembrane segment indicates that it acts as a membrane anchor, suggesting that the new Ank1 isoform may play an important role in organizing the contractile apparatus within the cell.

Sec-dependent membrane protein biogenesis: SecYEG, preprotein hydrophobicity and translocation kinetics control the stop-transfer function

Preprotein translocase catalyzes membrane protein integration as well as complete translocation. Membrane proteins must interrupt their translocation and be laterally released from the translocase into the lipid bilayer. We have analyzed the translocation arrest and lateral release activities of Escherichia coli preprotein translocase with an in vitro reaction and the preprotein proOmpA carrying a synthetic stop-transfer sequence. Membrane protein integration is catalytic, occurs with kinetics similar to those of proOmpA itself and only requires the functions of SecYEG and SecA. Though a strongly hydrophobic segment will direct the protein to leave the translocase and enter the lipid bilayer, a protein with a segment of intermediate hydrophobicity partitions equally between the translocated and membrane-integrated states. Analysis of the effects of PMF, varied ATP concentrations or synthetic translocation arrest show that the stop-translocation efficiency of a mildly hydrophobic segment depends on the translocation kinetics. In contrast, the lateral partitioning from translocase to lipids depends solely on temperature and does not require SecA ATP hydrolysis or SecA membrane cycling. Thus translocation arrest is controlled by the SecYEG translocase activity while lateral release and membrane integration are directed by the hydrophobicity of the segment itself. Our results suggest that a greater hydrophobicity is required for efficient translocation arrest than for lateral release into the membrane.

The structure and function of CD26 in the T-cell immune response

CD26 is a widely distributed 110 kD cell-surface glycoprotein with known dipeptidyl-peptidase IV (DPP-IV) activity in its extracellular domain. This ecto-enzyme is capable of cleaving amino terminal dipeptides from polypeptides with either L-proline or L-alanine in the penultimate position. On human T cells, CD26 expression appears late in thymic differentiation and is preferentially restricted to the CD4+ helper/memory population, and CD26 can deliver a potent co-stimulatory T-cell activation signal. The cDNA sequence of CD26 predicts a type II membrane protein with only 6 amino acids in its cytoplasmic region, suggesting that, in addition to DPP-IV enzyme activity, other signal-inducing molecules may be associated with CD26. Considerable evidence exists that CD26 interacts, presumably in its extracellular domain, with both CD45, a protein tyrosine phosphatase, and adenosine deaminase (ADA), each of which is capable of functioning in a signal transduction pathway. In addition, CD26 is the receptor for ADA, and ADA on the cell surface is involved in an important immunoregulatory mechanism by which released ADA binds to the cell-surface ADA. This multifunctional molecule may be involved in cell migration and the HIV-1-associated loss of CD4+ cells through the process of programmed cell death. Thus, CD26 appears to play a key role in a number of aspects of lymphocyte function.

Extending filamentous phage host range by the grafting of a heterologous receptor binding domain

fd and IKe are two similar filamentous phage which infect their hosts by means of pili found on the host membrane: fd infects bacteria bearing F pili, whereas IKe infects bacteria bearing N or I pili. Infection is mediated by the gene 3 protein (g3p), which of the nine proteins found in both phage is the most diverse. Previous attempts to incorporate g3p from one phage into the other by complementation have been unsuccessful [Bross et al. (1988) J. Gen. Microbiol. 134, 461-471]. Here we have grafted different parts of IKe g3p to the end of fd g3p and so augmented the host range of fd phage. We show that phage bearing such chimeric g3p are able to infect bacteria bearing both N and F pili providing they contain at least the receptor domain of IKe g3p, the infection of N bearing bacteria occurring at a level 70,000 times greater than background. This level of infection can be increased tenfold by including the glycine-rich domain as well. Addition of the penetration domain does not improve the level of infection above that of the receptor domain alone, indicating that the fd penetration domain is functional in the infection of bacteria bearing either N or F pili. Similarly derived fd phagemid also show increased infection of bacteria bearing N pili, albeit at much lower levels, suggesting that efficient infection requires more than one functional g3p on the surface of the phage.

On the targeting and membrane assembly of the Escherichia coli outer membrane porin, PhoE

Within gram-negative bacteria such as Escherichia coli, the outer membrane porins provide a relatively non-specific uptake route which is utilised by a wide range of solutes including many antibiotics. Understanding the targeting and membrane assembly of these proteins is therefore of importance and this mini review aims to discuss this process in light of present knowledge.

Human pro-tumor necrosis factor: molecular determinants of membrane translocation, sorting, and maturation

Human pro-tumor necrosis factor (pro-TNF) is a type II transmembrane protein with a highly conserved 76-residue leader sequence. We have analyzed the behavior, both in a microsomal translocational system and by transfection, of a series of mutants with deletions from the cytoplasmic, transmembrane, and linking domains. Cytoplasmic deletions included the Arg doublet at -49 and -48 and/or the Lys doublet at -58 and -57; additional mutants included deletion of residues -73 to -55 and -73 to -55, -49, and -48. The transmembrane and linking domain mutants included deletions in the -42 to -35 region, combined with the deletion of residues -32 to -1. Two hybrid mutants combined the cytoplasmic deletions with the deletion of residues -32 to -1. All of the cytoplasmic deletion mutants were properly translocated, as were the transmembrane deletion mutants with deletions up to residues -36, -35, -32 to -1, although the last one exhibited reduced efficiency; further incremental deletions, including deletions of residues -38 to -35 and -32 to -1, completely blocked translocation. Both hybrid mutants were effectively translocated; furthermore, transfection analysis revealed competent expression and maturation of both the cytoplasmic and hybrid mutants. Thus, proper expression and maturation of human pro-TNF can be accomplished with as few as approximately 12 of the 26 residues of the native transmembrane domain and with a net negative charge in the cytoplasmic domain flanking the transmembrane region.

Artificial transmembrane segments. Requirements for stop transfer and polypeptide orientation

Transmembrane segments of proteins generally consist of a long stretch of hydrophobic amino acids, which can function to initiate membrane insertion (start-stop sequences), initiate translocation (signal-anchor sequences), or stop further translocation of the following polypeptide chain (stop-transfer sequences). In this study, we have taken Escherichia coli alkaline phosphatase, a transported and water-soluble protein, and examined the requirements for converting it into a transmembrane protein with particular orientation. Since the wild type enzyme is transported, there is no predisposition against membrane translocation, yet it is not a membrane protein, so it does not possess any intrinsic membrane topogenic preferences. A series of potential transmembrane segments was introduced into an internal position of the enzyme to test the ability of each to initiate translocation, stop translocation, and adopt a particular orientation. For this purpose, cassette mutagenesis was used to incorporate new structural segments composed of polymers of alanines and leucines. The threshold value of hydrophobicity required to function as a stop-transfer sequence was determined. For a transmembrane segment of typical length (21 residues), this value is equivalent to the hydrophobicity of 16 alanines and 5 leucines. Interestingly, much shorter segments will also suffice to stop translocation, but these must be composed of more highly hydrophobic residues (e.g. 11 leucines). When the wild type amino-terminal signal peptide is deleted or made dysfunctional, sufficiently hydrophobic internal segments can initiate translocation of the following polypeptide and function as a signal anchor. Furthermore, in so doing, the orientation of the protein is changed from N(out)-C(in) to N(in)-C(out).

Sequences determining the cytoplasmic localization of a chemoreceptor domain

The Escherichia coli serine chemoreceptor (Tsr) is a protein with a simple topology consisting of two membrane-spanning sequences (TM1 and TM2) separating a large periplasmic domain from N-terminal and C-terminal cytoplasmic regions. We analyzed the contributions of several sequence elements to the cytoplasmic localization of the C-terminal domain by using chemoreceptor-alkaline phosphatase gene fusions. The principal findings were as follows. (i) The cytoplasmic localization of the C-terminal domain depended on TM2 but was quite tolerant of mutations partially deleting or introducing charged residues into the sequence. (ii) The basal level of C-terminal domain export was significantly higher in proteins with the wild-type periplasmic domain than in derivatives with a shortened periplasmic domain, suggesting that the large size of the wild-type domain promotes partial membrane misinsertion. (iii) The membrane insertion of deletion derivatives with a single spanning segment (TM1 or TM2) could be controlled by either an adjacent positively charged sequence or an adjacent amphipathic sequence. The results provide evidence that the generation of the Tsr membrane topology is an overdetermined process directed by an interplay of sequences promoting and opposing establishment of the normal structure.

The beta subunit of the signal recognition particle receptor is a transmembrane GTPase that anchors the alpha subunit, a peripheral membrane GTPase, to the endoplasmic reticulum membrane

The signal recognition particle receptor (SR) is required for the cotranslational targeting of both secretory and membrane proteins to the endoplasmic reticulum (ER) membrane. During targeting, the SR interacts with the signal recognition particle (SRP) which is bound to the signal sequence of the nascent protein chain. This interaction catalyzes the GTP-dependent transfer of the nascent chain from SRP to the protein translocation apparatus in the ER membrane. The SR is a heterodimeric protein comprised of a 69-kD subunit (SR alpha) and a 30-kD subunit (SR beta) which are associated with the ER membrane in an unknown manner. SR alpha and the 54-kD subunits of SRP (SRP54) each contain related GTPase domains which are required for SR and SRP function. Molecular cloning and sequencing of a cDNA encoding SR beta revealed that SR beta is a transmembrane protein and, like SR alpha and SRP54, is a member of the GTPase superfamily. Although SR beta defines its own GTPase subfamily, it is distantly related to ARF and Sar1. Using UV cross-linking, we confirm that SR beta binds GTP specifically. Proteolytic digestion experiments show that SR alpha is required for the interaction of SRP with SR. SR alpha appears to be peripherally associated with the ER membrane, and we suggest that SR beta, as an integral membrane protein, mediates the membrane association of SR alpha. The discovery of its guanine nucleotide-binding domain, however, makes it likely that its role is more complex than that of a passive anchor for SR alpha. These findings suggest that a cascade of three directly interacting GTPases functions during protein targeting to the ER membrane.

Membrane insertion defects caused by positive charges in the early mature region of protein pIII of filamentous phage fd can be corrected by prlA suppressors

The filamentous phage coat protein pIII has been used to display a variety of peptides and proteins to allow easy screening for desirable binding properties. We have examined the biological constraints that restrict the expression of short peptides located in the early mature region of pIII, adjacent to the signal sequence cleavage site. Many functionally defective pIII fusion proteins contained several positively charged amino acids in this region. These residues appear to inhibit proper insertion of pIII into the Escherichia coli inner membrane, blocking the assembly and extrusion of phage particles. Suppressor mutations in the prlA (secY) component of the protein export apparatus dramatically alleviate the phage growth defect caused by the positively charged residues. We conclude that insertion of pIII fusion proteins into the inner membrane can occur by a sec gene-dependent mechanism. The suppressor strains should be useful for increasing the diversity of peptides displayed on pIII in phage libraries.

Enhancement of antigen-induced T-cell proliferation by soluble CD26/dipeptidyl peptidase IV

The addition of a soluble recombinant CD26 (sCD26) enhanced proliferation of peripheral blood lymphocytes induced by the recall antigen tetanus toxoid. sCD26 itself did not provide a mitogenic signal and did not augment the proliferative response of T cells to other mitogenic stimuli such as phytohemagglutinin and anti-CD3. Dipeptidyl peptidase IV-negative sCD26 did not have this enhancement effect, implying a requirement for enzyme activity. It was found that there exists a large variation in the levels of human plasma sCD26/dipeptidyl peptidase IV in vivo which may regulate T-cell activity. Peripheral blood lymphocytes from individuals whose plasma sCD26 was high and responded strongly to tetanus toxoid stimulation were insensitive to the enhancing effects of exogenously added sCD26. This suggests that plasma sCD26 had modulated the responsiveness of T cells of these individuals in vivo and that the endogenous plasma sCD26 regulates immune responses by allowing antigen-specific T cells to exert a maximal response to their specific antigen.

Cleavable signal peptides are rarely found in bacterial cytoplasmic membrane proteins (review)

Most proteins destined for secretion are synthesized with amino-terminal extensions, known as signal peptides, which play a vital role in their translocation across the membrane bordering the cytoplasm. Following translocation across the eukaryotic endoplasmic reticulum (ER) membrane or the bacterial cytoplasmic membrane, signal peptides are proteolytically removed from the preproteins. The process of membrane protein assembly can be likened to that of protein export in that it involves the translocation of portions of proteins across membranes. Moreover, the topological similarities between eukaryotic ER and plasma membrane proteins and bacterial cytoplasmic membrane proteins suggest that the mechanisms of membrane protein assembly may, like those of protein export, share fundamental similarities in eukaryotic and bacterial cells. However, whilst many of the ER and plasma membrane proteins of higher eukaryotes are synthesized with cleavable signal peptides, the same is true of only very few bacterial cytoplasmic membrane proteins. This fact is not widely appreciated, probably because certain exceptional (signal peptide-containing) bacterial membrane proteins, such as the major coat protein of bacteriophage M13, have been the subject of extensive investigations. In this review we highlight this anomaly and discuss it within the general context of membrane protein topology.