Principles of Cation-π Interactions for Engineering Mussel-Inspired Functional Materials

CO2-Responsive Smart Wood Scaffold for Natural Organic Matter Removal without Secondary Pollution

Ensuring drinking water safety remains a critical challenge, particularly when treating complex water sources, due to secondary pollution caused by active chemical additives. Herein, a novel CO2-responsive smart wood scaffold that leverages non-toxic CO2 activation is developed to achieve highly efficient removal of carcinogenic natural organic matter (NOM) and broad-spectrum microbial disinfection without requiring additional chemical agents. Unlike conventional water purification techniques that face a safety-efficacy trade-off, the multi-stage CO2-responsive wood scaffold offers exceptional tunability in NOM abatement across diverse environmental conditions, including variable water chemistry, NOM composition, high salinity, and real-world water sources. The purified water meets stringent drinking water standards (e.g., UV254 reduction, dissolved organic carbon removal, and bacterial elimination). It is found that the highly efficient NOM adsorption mainly originates from the strong and stable CO2-triggered cation-π interaction between the scaffold surface and aromatic NOM groups, as revealed via high-resolution mass spectrometry and direct intermolecular force measurements. This ecofriendly and contamination-free CO2-responsive strategy provides a transformative approach to overcoming secondary pollution challenges in water purification, offering a scalable and sustainable platform for environmental applications and beyond.

Mussel-Inspired Molecular Strategies for Fabricating Functional Materials With Underwater Adhesion and Self-Healing Properties

The exceptional underwater adhesion and self-healing capabilities of mussels have fascinated researchers for over two decades. Extensive studies have shown that these remarkable properties arise from a series of reversible and dynamic molecular interactions involving mussel foot proteins. Inspired by these molecular interaction strategies, numerous functional materials exhibiting strong underwater adhesion and self-healing performance have been successfully developed. This review systematically explores the nanomechanical mechanisms of mussel-inspired molecular interactions, mainly revealed by direct force measurement techniques such as surface forces apparatus and atomic force microscopy. The development of functional materials, including coacervates, coatings, and hydrogels, with underwater adhesion and self-healing properties, is then summarized. Furthermore, the macroscopic material performances are correlated with the underlying molecular mechanisms, providing valuable insights for the rational design of next-generation mussel-inspired functional materials with enhanced underwater adhesion and self-healing properties.

Peptide Coacervates: Formation, Mechanism, and Biological Applications

Biomolecular coacervates, dynamic compartments formed via liquid-liquid phase separation (LLPS), are essential for orchestrating intracellular processes and have emerged as versatile tools in bioengineering. Peptides, with their modular amino acid sequences, exhibit unique potential in coacervate design due to their ability to undergo LLPS while offering precise control over molecular architecture and environmental responsiveness. Their simplicity, synthetic accessibility, and tunability make peptide-based coacervates particularly attractive for biomedical and materials applications. However, the formation and stability of these systems depend on a delicate balance of intrinsic factors (e.g., sequence charge, hydrophobicity, and chain length) and extrinsic conditions (e.g., pH, ionic strength, and temperature), necessitating a deeper understanding of their interplay. This review synthesizes recent advances in the molecular mechanisms driving peptide coacervation, emphasizing how sequence design and environmental cues govern phase behavior. We further highlight groundbreaking applications, from drug delivery platforms to protocell mimics, and discuss strategies to translate mechanistic insights into functional materials. By bridging fundamental principles with innovative applications, this work aims to accelerate the development of peptide coacervates as programmable, multifunctional systems, offering a roadmap for next-generation biochemical technologies.

Recent advances in tannic acid-based gels: Design, properties, and applications

With the flourishing of mussel-inspired chemistry, the fast-growing development for environmentally friendly materials, and the need for inexpensive and biocompatible analogues to PDA in gel design, TA has led to its gradual emergence as a research focus due to its remarkable biocompatible, renewable, sustainable and particular physicochemical properties. As a natural building block, TA can be used as a substrate or crosslinker, ensuring versatile functional polymeric networks for various applications. In this review, the design of TA-based gels is summarized in detail (i.e., different interactions such as: metal coordination, electrostatic, hydrophobic, host-guest, cation-π and π-π stacking interactions, hydrogen bonding and various reactions including: phenol-amine Michael and Schiff base, phenol-thiol Michael addition, phenol-epoxy ring opening reaction, etc.). Subsequently, TA-based gels with a variety of functionalities, including mechanical, adhesion, conductive, self-healing, UV-shielding, anti-swelling, anti-freezing, shape memory, antioxidant, antibacterial, anti-inflammatory and responsive properties are introduced in detail. Then, a summary of recent developments in the use of TA-based gels is provided, including bioelectronics, biomedicine, energy, packaging, water treatment and other fields. Finally, the difficulties that TA-based gels are currently facing are outlined, and an original yet realistic viewpoint is provided in an effort to spur future development.

Perceiving and Countering Marine Biofouling: Structure, Forces, and Processes at Surfaces in Sea Water Across the Length Scales

In marine industries, severe economic losses are caused by accumulating organisms on surfaces in biofouling processes. Establishing a universal and nontoxic protocol to eliminate biofouling has been a notoriously difficult task due to the complexity of the marine organisms' interactions with surfaces and the chemical, mechanical, and morphological diversity of the surfaces involved. The tremendous variety of environmental parameters in marine environments further complicates this field. For efficient surface engineering to combat fouling, secretion, chemical structure, and properties of biobased adhesives and adhesion mechanisms must be understood. Advanced characterization techniques, like Atomic Force Microscopy (AFM), now allow one to study the three parameters determining surface adhesion and, eventually, fouling, i.e., morphology, chemistry, and surface mechanical modulus. By AFM, characterization can now be performed across length scales from nanometers to hundreds of micrometers. This review provides an up-to-date account of the most promising AFM-based approaches for imaging and characterizing natural adhesives provided by marine organisms. We summarize the current understanding of the molecular basis and the related relevant processes of marine fouling. We focus on applications of AFM "beyond imaging", i.e., to study interactions between adhesives and the surfaces involved. Additionally, we discuss the performance enhancement of polymer antifouling coatings using information derived from AFM. Knowledge and control of marine adhesion can be applied to prevent marine fouling, as well as to design bioadhesives to enhance potential medical applications. We present some milestone results and conclude with an outlook discussing novel possibilities for designing antifouling coatings and medical bioadhesives.

The Cation-π Interaction in Chemistry and Biology

The cation-π interaction is an important noncovalent binding force that impacts all areas of chemistry and biology. Extensive computational and gas phase experimental studies have established the potential strength and the essential nature of the interaction. Previous reviews have emphasized studies of model systems and a variety of biological examples. This work includes discussion of those areas but emphasizes other areas that are perhaps less well appreciated. These include the novel cation-π binding ability of alkali metals in water; the application of the cation-π interaction to organic synthesis and chemical biology; cooperative behaviors of multiple cation-π interactions, including adhesive proteins from mussels and similar organisms and the formation and modulation of biomolecular condensates (phase separation); and cation-π interactions involved in recognizing DNA/RNA.

Adhesive conductive wood-based hydrogel with high tensile strength as a flexible sensor

Conductive hydrogels have promising applications for flexible strain sensors. However, most hydrogels have poor tensile strength and are susceptible to damage, significantly impeding their potential for further application. Wood has been used to reinforce hydrogels, significantly enhancing their strength and dimensional stability. However, wood-based hydrogels generally lack adhesive properties or exhibit low self-adhesion. To address this issue, we introduced acryloyloxyethyltrimethyl ammonium chloride (DAC) into the hydrogel network through graft aggregation. The resulting electrostatic interactions significantly enhanced the adhesion of the wood-based hydrogel up to 270 kPa (for glass) and concurrently strengthened its cohesion. The prepared novel wood-based hydrogel (WDDH) exhibited high tensile strength (3.38 MPa), low-swelling ratio (only 2 % longitudinal), and high tensile strain (274.40 %). When WDDH was used as the wearable strain sensor, it showed a gauge factor of approximately 4.94. The device effectively captured and detected human movements, including finger and joint flexion, walking patterns, and hydration habits. The objective of this research is to develop a wood-based hydrogel with enhanced mechanical strength, adhesive properties, and flexibility for use in wearable sensors. This study provides insight into the development of flexible sensor hydrogels with improved adhesion properties using biomass materials.

Advances in Adhesive Materials for Oral and Maxillofacial Soft Tissue Diseases

Oral diseases represent a prevalent global health burden, profoundly affecting patients' quality of life. Given the involvement of oral mucosa and muscles in diverse physiological functions, coupled with clinical aesthetics considerations, repairing oral and maxillofacial soft tissue defects poses a formidable challenge. Wet-adhesive materials are regarded as promising oral repair materials due to their unique advantages in easily overcoming physical and biological barriers in the oral cavity. This review first introduces the intricate wet-state environment prevalent in the oral cavity, meticulously explaining the fundamental physical and chemical adhesion mechanisms that underpin adhesive materials. It then comprehensively summarizes the diverse types of adhesives utilized in stomatology, encompassing polysaccharide, protein, and synthetic polymer adhesive materials. The review further evaluates the latest research advancements in utilizing these materials to treat various oral and maxillofacial soft tissue diseases, including oral mucosal diseases, periodontitis, peri-implantitis, oral and maxillofacial skin defects, and maxillofacial tumors. Finally, it also highlights the promising future prospects and pivotal challenges related to stomatology application of multifunctional adhesive materials.

Engineering Protein-Based Lipid-Binding Nanovesicles via Catechol-Amine-Derived Coacervation with Their Underlying Interfacial Mechanisms

The development of nonphospholipid nanovesicles has garnered tremendous attention as a viable alternative to traditional liposomal nanovesicles. Protein/peptide-based nanovesicles have demonstrated their potential to reduce immunogenicity while enhancing bioactivity. However, a fundamental understanding of how proteinaceous vesicles interact with lipids and cell membranes remains elusive. In this study, we engineered a series of protamine-based nonphospholipid nanovesicles by modulating intramolecular catechol-amine interactions. By grafting trihydroxybenzene (GA) and catechol (CA) groups onto the protamine (Prot), a salt-triggered coacervation was observed in an alkaline environment with the size of as-prepared vesicles ranging from 200 to 1200 nm. The bonding affinity to lipid interfaces followed the order of Prot-CA-Fe3+(25 μM) > Prot-CA-Fe3+(10 μM) > Prot-CA > original Prot with the underlying nanomechanics investigated by the lipid bubble force measurement. Direct quantification of interactions between the nanovesicles and living human gingival fibroblasts was performed by using surface charge difference mapping. Introducing trace amounts of Fe3+ (at 10 and 25 μM) enhanced vesicle-lipid interactions via the synergy of catechol-amine interactions and Fe3+-induced complexation. This work provides improved valuable insights into the interactions between nanovesicles and cell membranes, offering an energetic paradigm for modulating cell-target delivery processes via intramolecular short-range interactions.

Facile One-Pot Preparation of Self-Assembled Hyaluronate/Doxorubicin Nanoaggregates for Cancer Therapy

Hyaluronic acid (HA)-based delivery systems for doxorubicin (DOX) have been developed to selectively target cancer cells and enhance their therapeutic effects while reducing systemic side effects. However, conventional methods for preparing HA-based drug delivery systems are often limited by multistep synthetic processes, time-consuming purification, and the use of crosslinkers or surfactants, which can cause undesired toxicities. To resolve these issues, we developed a facile one-pot method to prepare self-assembled sodium hyaluronate/doxorubicin (HA/DOX) nanoaggregates by mixing HA and DOX. The self-assembled HA/DOX nanoaggregates were formed via cation-π interactions between the aromatic moiety of DOX and Na+ ions in HA as well as electrostatic interactions between HA and DOX. The optimized HA/DOX nanoaggregates with a [DOX]/[HA] molar ratio of 5 had an average particle size of approximately 250 nm and a sphere-like shape. In vitro studies revealed that HA/DOX nanoaggregates effectively targeted CD44-overexpressing cancer cells, selectively delivering DOX into the cell nuclei more efficiently than free DOX and resulting in enhanced cytotoxic effects. Annexin V and transferase dUTP nick-end labeling assays confirmed that HA/DOX nanoaggregates induced apoptosis via DNA fragmentation more effectively than free DOX.

Graphene oxide and its derivatives films for sustained-release trace element zinc based on cation-π interaction

Preventing and controlling agricultural non-point-source pollution, advancing the agricultural industry, and facilitating cation-π interaction to address cation instability and fertilizer loss are crucial for advancing agricultural sustainability. Due to the unique π-bond characteristics of GO (graphene oxide), it was selected as a cation carrier to improve fertilizer anti-loss capabilities and facilitate the effective release of nutrient ions. By adjusting the interface properties of GO, RGO (rippled graphene oxide) and CGO (crumpled graphene oxide) were successfully prepared, and their interactions with cations and the impact on sustained-release performance were studied. The selected optimal kinetic model provides a theoretical basis for material design. The results indicate that RGO-Zn1 (Zn2+/RGO = 16.7%) can not only effectively control agricultural non-point source pollution but also promote the cultivation of high-zinc rice. This study not only proposes an innovative solution for soil improvement and agricultural transformation and upgrading but also offers fundamental scientific insights into the cation-π interaction mechanism during transmembrane permeation.

Metal-phenolic network biointerface-mediated cell regulation for bone tissue regeneration

Bone tissue regeneration presents a significant challenge in clinical treatment due to inadequate coordination between implant materials and reparative cells at the biomaterial-bone interfaces. This gap underscores the necessity of enhancing interaction modulation between cells and biomaterials, which is a crucial focus in bone tissue engineering. Metal-polyphenolic networks (MPN) are novel inorganic-organic hybrid complexes that are formed through coordination interactions between phenolic ligands and metal ions. These networks provide a multifunctional platform for biomedical applications, with the potential for tailored design and modifications. Despite advances in understanding MPN and their role in bone tissue regeneration, a comprehensive overview of the related mechanisms is lacking. Here, we address this gap by focusing on MPN biointerface-mediated cellular regulatory mechanisms during bone regeneration. We begin by reviewing the natural healing processes of bone defects, followed by a detailed examination of MPN, including their constituents and distinctive characteristics. We then explore the regulatory influence of MPN biointerfaces on key cellular activities during bone regeneration. Additionally, we illustrate their primary applications in addressing inflammatory bone loss, regenerating critical-size bone defects, and enhancing implant-bone integration. In conclusion, this review elucidates how MPN-based interfaces facilitate effective bone tissue regeneration, advancing our understanding of material interface-mediated cellular control and the broader field of tissue engineering.

Aggregation-Disruption-Induced Multi-Scale Mediating Strategy for Anticoagulation in Blood-Contacting Devices

Minimally invasive blood-contacting interventional devices are increasingly used to treat cardiovascular diseases. However, the risk of device-related thrombosis remains a significant concern, particularly the formation of cycling thrombi, which pose life-threatening risks. To better understand the interactions between these devices and blood, the initial stages of coagulation contact activation on extrinsic surfaces are investigated. Direct force measurements reveals that activated contact factors stimulate the intrinsic coagulation pathway and promote surface crosslinking of fibrin. Furthermore, fibrin aggregation is disrupted by surface-grafted inhibitors, as confirmed by ex vivo coagulation tests. An engineered serum protein with zwitterion grafts to resist the deposition of biological species such as fibrin, platelets, and red blood cells is also developed. Simultaneously, a protease inhibitor-based coacervate is incorporated into the coating to inhibit the intrinsic pathway effectively. The loaded coacervate can be released and reloaded through modulation of catechol-amine interactions, facilitating material regeneration. The strategy offers a novel multi-scale mediation strategy that simultaneously inhibits nanoscale coagulation factors and resists microscale thrombus aggregation, providing a long-term solution for anticoagulation in blood-contacting devices.

Ion-Specific Interactions Engender Dynamic and Tailorable Properties in Biomimetic Cationic Polyelectrolytes

Biomaterials such as spider silk and mussel byssi are fabricated by the dynamic manipulation of intra- and intermolecular biopolymer interactions. Organisms modulate solution parameters, such as pH and ion co-solute concentration, to effect these processes. These biofabrication schemes provide a conceptual framework to develop new dynamic and responsive abiotic soft material systems. Towards these ends, the chemical diversity of readily available ionic compounds offers a broad palette to manipulate the physicochemical properties of polyelectrolytes via ion-specific interactions. In this study, we show for the first time that the ion-specific interactions of biomimetic polyelectrolytes engenders a variety of phase separation behaviors, creating dynamic thermal- and ion-responsive soft matter that exhibits a spectrum of physical properties, spanning viscous fluids to viscoelastic and viscoplastic solids. These ion-dependent characteristics are further rendered general by the merger of lysine and phenylalanine into a single, amphiphilic vinyl monomer. The unprecedented breadth, precision, and dynamicity in the reported ion-dependent phase behaviors thus introduce a broad array of opportunities for the future development of responsive soft matter; properties that are poised to drive developments in critical areas such as chemical sensing, soft robotics, and additive manufacturing.

Chemically Reversible Translational Moiré Superlattice Formations in the Two-Dimensional Films of the Zinc Phthalate Complex

The exciting electronic properties of two-dimensional layered materials introduced by twist angle and lattice mismatch between two consecutive layers are well-recognized. The major challenge lies in the control over the moiré periodicity. Herein, we report a chemically directed way to achieve the desired precision over moiré periodicity of the assembly of a complex of zinc ions and o-phthalic acid utilizing soft bonds. The reaction of o-phthalic acid with zinc ions in the aqueous medium at 80 °C for 1 h followed by preserving the reaction mixture at ambient temperature (35 °C) resulted in translational moiré superlattices with precise periods. Those lattices are further stacked angularly to give rotational super-moiré lattices. Further, the role of the π-zinc ion interaction in the origin of moiré fringes was examined with the reaction with 8-hydroxyquinoline-5-sulfonic acid (HQS) that also established the reversible nature of the superlattices. The present observations also suggest the formation of moiré superlattice through ion insertion in a chemical lattice.

Supramolecular Complex Surfactants and Structured Liquids Enabled by Cation-π and Charge-Transfer Interactions

Cation-π and charge-transfer (CT) interactions are pervasive with significant implications in the fields of chemistry, materials science, and biology. However, much less is known about the construction of interfacial assemblies based on the two interactions. Here, by combining cation-π and CT interactions between an acceptor molecule, dicationic naphthalenediimide, and an aromatic donor, pyrene-terminated poly-l-lactic acid, we report the generation of supramolecular complex surfactants (SCSs) in situ at the toluene-water interface. The utilization of SCSs as building blocks enables the fabrication of interfacial assemblies including 2D films, emulsions, and structured liquids. By modification of the redox state of the acceptor molecules under chemical stimulus, the association/assembly and dissociation/disassembly of SCSs can be precisely regulated, imparting intriguing redox-responsive properties to the resulting assemblies.

Freezing-Tolerant Supramolecular Adhesives from Tannic Acid-Based Low-Transition-Temperature Mixtures

Natural polyphenols like tannic acid (TA) have recently emerged as multifunctional building blocks for designing advanced materials. Herein, we show the benefits of having TA in a dynamic liquid state using low-transition-temperature mixtures (LTTMs) for developing freezing-tolerant glues. TA was combined with betaine or choline chloride to create LTTMs, which direct the self-assembly of guanosine into supramolecular viscoelastic materials with high adhesion. Molecular dynamics simulations showed that the structural properties of the material are linked to strong hydrogen bonding in TA-betaine and TA-choline chloride mixtures. Notably, long-term and repeatable adhesion was achieved even at -196 °C due to the binding ability of TA's catechol and gallol units and the mixtures' glass transition temperature. Additionally, the adhesives demonstrated injectability and low toxicity against fibroblasts in vitro. These traits reveal the potential of these systems as bioadhesives for tissue repair, opening new avenues for creating multifunctional soft materials with bioactive properties.

Poly(phenylalanine) and poly(3,4-dihydroxy-L-phenylalanine): Promising biomedical materials for building stimuli-responsive nanocarriers

Cancer is a serious threat to human health because of its high annual mortality rate. It has attracted significant attention in healthcare, and identifying effective strategies for the treatment and relief of cancer pain requires urgency. Drug delivery systems (DDSs) offer the advantages of excellent efficacy, low cost, and low toxicity for targeting drugs to tumor sites. In recent decades, copolymer carriers based on poly(phenylalanine) (PPhe) and poly(3,4-dihydroxy-L-phenylalanine) (PDopa) have been extensively investigated owing to their good biocompatibility, biodegradability, and controllable stimulus responsiveness, which have resulted in DDSs with loading and targeted delivery capabilities. In this review, we introduce the synthesis of PPhe and PDopa, highlighting the latest proposed synthetic routes and comparing the differences in drug delivery between PPhe and PDopa. Subsequently, we summarize the various applications of PPhe and PDopa in nanoscale-targeted DDSs, providing a comprehensive analysis of the drug release behavior based on different stimulus-responsive carriers using these two materials. In the end, we discuss the challenges and prospects of polypeptide-based DDSs in the field of cancer therapy, aiming to promote their further development to meet the growing demands for treatment.

Visual Quantitation of Dopamine-Inspired Fluorescent Adhesion with Orthogonal Phenanthrenequinone Photochemistry

Quantifying adhesion is crucial for understanding adhesion mechanisms and developing advanced dopamine-inspired materials and devices. However, achieving nondestructive and real-time quantitation of adhesion using optical spectra remains challenging. Here, we present a dopamine-inspired orthogonal phenanthrenequinone photochemistry strategy for the one-step adhesion and real-time visual quantitation of fluorescent spectra. This strategy utilizes phenanthrenequinone-mediated photochemistry to facilitate conjoined network formation in the adhesive through simultaneous photoclick cycloaddition and free-radical polymerization. The resulting hydrogel-like adhesive exhibits good mechanical performance, with a Young's modulus of 300 kPa, a toughness of 750 kJ m-3, and a fracture energy of 4500 J m-2. This adhesive, along with polycyclic aromatic phenanthrenequinones, shows strong adhesion (>100 kPa) and interfacial toughness thresholds (250 J m-2) on diverse surfaces─twice to triple as much as typical dopamine-contained adhesives. Importantly, such an adhesive demonstrates excellent fluorescent performance under UV irradiation, closely correlating with its adhesion strengths. Their fluorescence intensities remain constant after continuous stretching/releasing treatment and even in the dried state. Therefore, this dopamine-inspired orthogonal phenanthrenequinone photochemistry is readily available for real-time and nondestructive visual quantitation of adhesion performance under various conditions. Moreover, the adhesive precursor is chemically ultrastable for more than seven months and achieves adhesion on substrates within seconds upon blue light irradiation. As a proof-of-concept, we leverage the rapid and visual quantitation of adhesion and printability to create fluorescent patterns and structures, showcasing applications in information storage, adhesion prediction, and self-reporting properties. This general and straightforward strategy holds promise for rapidly preparing functional adhesive materials and designing high-performance wearable devices.

Intramolecular Cation-π Interactions Organize Bowl-Shaped, Luminescent Molecular Containers

Molecules with nonplanar architectures are highly desirable due to their unique topological structures and functions. We report here the synthesis of two molecular containers (1 ⋅ 3Br- and 1 ⋅ 3Cl-), which utilize intramolecular cation-π interactions to enforce macrocylic arrangements and exhibit high binding affinity and luminescent properties. Remarkably, the geometry of the cation-π interaction can be flexibly tailored to achieve a precise ring arrangement, irrespective of the angle of the noncovalent bonds. Additionally, the C-H⋅⋅⋅Br- hydrogen bonds within the container are also conducive to stabilizing the bowl-shaped conformation. These bowl-shaped conformations were confirmed both in solution through NMR spectroscopy and in the solid state by X-ray studies. 1 ⋅ 3Br- shows high binding affinity and selectivity: F->Cl-, through C-H⋅⋅⋅X- (X=F, Cl) hydrogen bonds. Additionally, these containers exhibited blue fluorescence in solution and yellow room-temperature phosphorescence (RTP) in the solid state. Our findings illustrate the utility of cation-π interactions in designing functional molecules.

Direct Assembly of Bioactive Nanoparticles Constructed from Polyphenol-Nanoengineered Albumin

Albumin nanoparticles are widely used in biomedicine due to their safety, low immunogenicity, and prolonged circulation. However, incorporating therapeutic molecules into these carriers faces challenges due to limited binding sites, restricting drug conjugation efficiency. We introduce a universal nanocarrier platform (X-UNP) using polyphenol-based engineering to incorporate phenolic moieties into albumin nanoparticles. Integration of catechol or galloyl groups significantly enhances drug binding and broadens the drug conjugation possibilities. Our study presents a library of X-UNP nanoparticles with improved drug-loading efficiency, achieving up to 96% across 10 clinically used drugs, surpassing conventional methods. Notably, ibuprofen-UNP nanoparticles exhibit a 5-fold increase in half-life compared with free ibuprofen, enhancing in vivo analgesic and anti-inflammatory effectiveness. This research establishes a versatile platform for protein-based nanosized materials accommodating various therapeutic agents in biotechnological applications.

Chemical Design of Supramolecular Reversible Adhesives for Promising Applications

Supramolecular reversible adhesives have garnered significant attention due to their potential applications in various fields. These adhesives exhibit remarkable properties such as reversible adhesion, self-healing, and high flexibility. This concept aims to present a comprehensive overview of the current research progress in developing supramolecular reversible adhesives. Firstly, the fundamentals of supramolecular chemistry and the principles underlying the design and synthesis of reversible adhesive systems are discussed. Next, the concept focuses on characterizing the reversible adhesion strength of supramolecular adhesive systems that have been developed. The adhesion performance of supramolecular reversible adhesives is summarized, highlighting their unique characteristics and promising applications. Finally, the challenges and future perspectives in the field of supramolecular reversible adhesives are discussed. The comprehensive overview provided in this concept aims to inspire further research and innovation in this exciting field.

Injectable Self-Expanding/Self-Propelling Hydrogel Adhesive with Procoagulant Activity and Rapid Gelation for Lethal Massive Hemorrhage Management

Developing hydrogels that can quickly reach deep bleeding sites, adhere to wounds, and expand to stop lethal and/or noncompressible bleeding in civil and battlefield environments remains a challenge. Herein, an injectable, antibacterial, self-expanding, and self-propelling hydrogel bioadhesive with procoagulant activity and rapid gelation is reported. This hydrogel combines spontaneous gas foaming and rapid Schiff base crosslinking for lethal massive hemorrhage. Hydrogels have rapid gelation and expansion rate, high self-expanding ratio, excellent antibacterial activity, antioxidant efficiency, and tissue adhesion capacity. In addition, hydrogels have good cytocompatibility, procoagulant ability, and higher blood cell/platelet adhesion activity than commercial combat gauze and gelatin sponge. The optimized hydrogel (OD-C/QGQL-A30) exhibits better hemostatic ability than combat gauze and gelatin sponge in rat liver and femoral artery bleeding models, rabbit volumetric liver loss massive bleeding models with/without anticoagulant, and rabbit liver and kidney incision bleeding models with bleeding site not visible. Especially, OD-C/QGQL-A30 rapidly stops the bleedings from pelvic area of rabbit, and swine subclavian artery vein transection. Furthermore, OD-C/QGQL-A30 has biodegradability and biocompatibility, and accelerates Methicillin-resistant S. aureus (MRSA)-infected skin wound healing. This injectable, antibacterial, self-expanding, and self-propelling hydrogel opens up a new avenue to develop hemostats for lethal massive bleeding, abdominal organ bleeding, and bleeding from coagulation lesions.

Synthetic Polypeptide Bioadhesive Based on Cation-π Interaction and Secondary Structure

Bioadhesives have garnered widespread attention in the biomedical field, for wound healing and tissue sealing. However, challenges exist due to the inferior performance of bioadhesives, including weak adhesion, poor biocompatibility, or lack of biodegradability. In this work, we demonstrate the fabrication of hydrogel adhesive based on polypeptides composed of lysine and glutamic acid. The cation-π interaction between the ammonium cations and phenyl groups endows the hydrogel with strong cohesion, and the hydrophobicity of the phenyl group significantly enhances the interaction between polypeptides and the substrate interface, leading to excellent adhesive performance. The equivalent molar ratio of ammonium cations and the phenyl group is beneficial for the enhancement of adhesiveness. Furthermore, we discover that the polypeptides with an α-helix exhibit better adhesiveness than the polypeptides with a β-sheet because the α-helical structure can increase the exposure of the side group on the polypeptide surface, which further strengthens the interaction between polypeptides and the substrate. Besides, this synthetic polypeptide adhesive can seal the tissue quickly and remain intact in water. This adhesive holds significant promise for application in wound healing and tissue sealing, and this study provides insight into the development of more peptide-based adhesives.

Illuminating a Solvent-Dependent Hierarchy for Aromatic CH/π Complexes with Dynamic Covalent Glyco-Balances

CH/π interactions are prevalent among aromatic complexes and represent invaluable tools for stabilizing well-defined molecular architectures. Their energy contributions are exceptionally sensitive to various structural and environmental factors, resulting in a context-dependent nature that has led to conflicting findings in the scientific literature. Consequently, a universally accepted hierarchy for aromatic CH/π interactions has remained elusive. Herein, we present a comprehensive experimental investigation of aromatic CH/π complexes, employing a novel approach that involves isotopically labeled glyco-balances generated in situ. This innovative strategy not only allows us to uncover thermodynamic insights but also delves into the often less-accessible domain of kinetic information. Our analyses have yielded more than 180 new free energy values while considering key factors such as solvent properties, the interaction geometry, and the presence and nature of accompanying counterions. Remarkably, the obtained results challenge conventional wisdom regarding the stability order of common aromatic complexes. While it was believed that cationic CH/π interactions held the highest strength, followed by polarized CH/π, nonpolarized CH/π, and finally anionic CH/π interactions, our study reveals that this hierarchy can be subverted depending on the environment. Indeed, the performance of polarized CH/π interactions can match or even outcompete that of cationic CH/π interactions making them a more reliable stabilization strategy across the entire spectrum of solvent polarity. Overall, our results provide valuable guidelines for the selection of optimal interacting partners in every chemical environment, allowing the design of tailored aromatic complexes with applications in supramolecular chemistry, organocatalysis, and/or material sciences.

Efficient Removal of Tetracyclines and Quinolones Enabled by Polyphenol-Mediated Supramolecular Coagulation

Ubiquitous antibiotics threaten human health and ecosystem sustainability, and existing removal strategies, especially conventional multistep water treatments, are primarily limited by the antibiotic-specific removal capability. Here, we explore the natural biomass, plant polyphenols, in the capture of various antibiotics with a facile treatment─polyphenol-mediated antibiotic-independent supramolecular coagulation (PMAC). The PMAC shows a superior performance in removing five tetracyclines and quinolones (up to 98.54%), even under complex environmental parameters, including different pH, the presence of inorganic particles and ionic strength, and the presence of conventional colloid-associated contaminants. Our mechanistic studies suggested that PMAC is capable of exerting multiple molecular interactions with various antibiotics, and the coordination-driven self-assembly further destabilizes the phenolic-antibiotic nanocomplexes, enabling an antibiotic-independent coagulation. Collectively, the combination of efficient remediation with inexpensive biomass suggests a simple and scalable method for the sustainable removal of antibiotics. Our strategy shows great promise as a cost-effective, facile approach to eliminate antibiotics capable of being integrated into the currently existing water treatment systems.

The complex of tannic acid and cetylpyridinium chloride: An antibacterial and stain-removal cleaner for aligners

INTRODUCTION

Effective aligner hygiene is recognized as an important part of orthodontic treatments and oral hygiene. However, there is no effective cleansing method for removable aligners.

METHODS

In this study, we incorporated tannic acid (TA) with cetylpyridinium chloride (CPC) to develop the TA-CPC complex. The antibacterial properties of 15.8 mg/mL TA-CPC against Escherichia coli and Staphylococcus aureus were evaluated in vitro, which were compared with 5.1 mg/mL TA, 10.7 mg/mL CPC, a commercial denture cleansing solution (YA; 15 mg/mL), and water. As for the assessment of stain-removal ability, the aligners stained by coffee were soaked in cleansing solutions, and the color changes (ΔE∗) were calculated on the basis of the CIE L∗a∗b∗ color system, and the National Bureau of Standards system was used for the clinical interpretation of the color change. Atomic force microscope examination, tensile property assessment, and wavelength dispersive x-ray fluorescence analysis were performed to investigate the material compatibility of TA-CPC, and Cell Counting Kit-8 assay and live/dead assay were used to test the cytotoxicity of TA-CPC.

RESULTS

The results showed that TA-CPC had a positive zeta-potential, and cation-π interaction changed the chemical environments of the phenyl group in TA-CPC, resulting in greater inhibition zones of S. aureus and E. coli than other cleaners. The quantification of the biofilm biomass and the fluorescent intensities also reflected that the TA-CPC solution exhibited better antibacterial ability. As for the ability of stain removal, ΔE∗ value of group TA-CPC was 2.84 ± 0.55, whereas those of stained aligners immersed with deionized distilled water, TA, YA, and CPC were 10.26 ± 0.04, 9.54 ± 0.24, 5.93 ± 0.36, and 4.69 ± 0.35, respectively. The visual inspection and National Bureau of Standards ratings also showed that the color of stained aligners cleansed by TA-CPC was much lighter than those of the other groups. Meanwhile, TA-CPC had good compatibility with the aligner material and cells.

CONCLUSIONS

TA-CPC is a promising strategy to inhibit the formation of biofilms and remove the stains on the aligners safely, which may disinfect the aligners to improve oral health and help keep the transparent appearances of aligners without impacting the morphology and mechanical properties.

Recent advances in fabricating injectable hydrogels via tunable molecular interactions for bio-applications

Hydrogels with three-dimensional structures have been widely applied in various applications because of their tunable structures, which can be easily tailored with desired functionalities. However, the application of hydrogel materials in bioengineering is still constrained by their limited dosage flexibility and the requirement of invasive surgical procedures. Compared to traditional hydrogels, injectable hydrogels, with shear-thinning and/or in situ formation properties, simplify the implantation process and reduce tissue invasion, which can be directly delivered to target sites using a syringe injection, offering distinct advantages over traditional hydrogels. These injectable hydrogels incorporate physically non-covalent and/or dynamic covalent bonds, granting them self-healing abilities to recover their structural integrity after injection. This review summarizes our recent progress in preparing injectable hydrogels and discusses their performance in various bioengineering applications. Moreover, the underlying molecular interaction mechanisms that govern the injectable and functional properties of hydrogels were characterized by using nanomechanical techniques such as surface forces apparatus (SFA) and atomic force microscopy (AFM). The remaining challenges and future perspectives on the design and application of injectable hydrogels are also discussed. This work provides useful insights and guides future research directions in the field of injectable hydrogels for bioengineering.

Supramolecular hydrogels for wound repair and hemostasis

The unique network characteristics and stimuli responsiveness of supramolecular hydrogels have rendered them highly advantageous in the field of wound dressings, showcasing unprecedented potential. However, there are few reports on a comprehensive review of supramolecular hydrogel dressings for wound repair and hemostasis. This review first introduces the major cross-linking methods for supramolecular hydrogels, which includes hydrogen bonding, electrostatic interactions, hydrophobic interactions, host-guest interactions, metal ligand coordination and some other interactions. Then, we review the advanced materials reported in recent years and then summarize the basic principles of each cross-linking method. Next, we classify the network structures of supramolecular hydrogels before outlining their forming process and propose their potential future directions. Furthermore, we also discuss the raw materials, structural design principles, and material characteristics used to achieve the advanced functions of supramolecular hydrogels, such as antibacterial function, tissue adhesion, substance delivery, anti-inflammatory and antioxidant functions, cell behavior regulation, angiogenesis promotion, hemostasis and other innovative functions in recent years. Finally, the existing problems as well as future development directions of the cross-linking strategy, network design, and functions in wound repair and hemostasis of supramolecular hydrogels are discussed. This review is proposed to stimulate further exploration of supramolecular hydrogels on wound repair and hemostasis by researchers in the future.

Mussel-Inspired Cation-π Interactions: Wet Adhesion and Biomimetic Materials

Cation-π interaction is one of the most important noncovalent interactions identified in biosystems, which has been proven to play an essential role in the strong adhesion of marine mussels. In addition to the well-known catecholic amino acid, l-3,4-dihydroxyphenylalanine, mussel foot proteins are rich in various aromatic moieties (e.g., tyrosine, phenylalanine, and tryptophan) and cationic residues (e.g., lysine, arginine, and histidine), which favor a series of short-range cation-π interactions with adjustable strengths, serving as a prototype for the development of high-performance underwater adhesives. This work highlights our recent advances in understanding and utilizing cation-π interactions in underwater adhesives, focusing on three aspects: (1) the investigation of the cation-π interaction mechanisms in mussel foot proteins via force-measuring techniques; (2) the modulation of cation-π interactions in mussel mimetic polymers with the variation of cations, anions, and aromatic groups; (3) the design of wet adhesives based on these revealed principles, leading to functional materials in the form of films, coacervates, and hydrogels with biomedical and engineering applications. This review provides valuable insights into the development and optimization of smart materials based on cation-π interactions.

Injectable Antiswelling and High-Strength Bioactive Hydrogels with a Wet Adhesion and Rapid Gelling Process to Promote Sutureless Wound Closure and Scar-free Repair of Infectious Wounds

Developing injectable antiswelling and high-strength bioactive hydrogels with wet tissue adhesiveness and a rapid gelling process to meet the requirements for rapid hemostasis, sutureless wound closure, and scar-free repair of infected skin wounds continues to have ongoing challenges. Herein, injectable, antibacterial, and antioxidant hydrogel adhesives based on poly(citric acid-co-polyethylene glycol)-g-dopamine and amino-terminated Pluronic F127 (APF) micelles loaded with astragaloside IV (AS) are prepared. The H2O2/horseradish peroxidase (HRP) system is used to cause cross-linking of the hydrogel network through oxidative coupling between catechol groups and chemical cross-linking between the catechol group and the amino group. The hydrogels exhibit a rapid gelling process, high mechanical strength, an antiswelling effect, good antioxidant property, H2O2 release behavior, and degradability. In addition, the hydrogels present good wet tissue adhesiveness, high bursting pressure, excellent antibacterial activity, long-term sustained release of AS, and good biocompatibility. The hydrogels perform good hemostasis on mouse liver, rat liver, and rabbit femoral vein bleeding models and achieve much better closure and healing of skin incisions than biomedical glue and surgical sutures. Furthermore, the hydrogel dressing significantly improved the scar-free repair of MRSA-infected full thickness skin defect wounds by modulating inflammation, regulating the ratio of collagen I/III, and improving the vascularization and granulation tissue formation. Thus, AS-loaded hydrogels show huge potential as multifunctional dressings for in vivo hemostasis, sutureless wound closure, and scar-free repair of infected skin wounds.

Biologically Derived Nanoarchitectonic Coatings for the Engineering of Hemostatic Needles

Bleeding after venipuncture could cause blood loss, hematoma, bruising, hemorrhagic shock, and even death. Herein, a hemostatic needle with antibacterial property is developed via coating of biologically derived carboxymethyl chitosan (CMCS) and Cirsium setosum extract (CsE). The rapid transition from films of the coatings to hydrogels under a wet environment provides an opportunity to detach the coatings from needles and subsequently seal the punctured site. The hydrogels do not significantly influence the healing process of the puncture site. After hemostasis, the coatings on hemostatic needles degrade in 72 h without inducing a systemic immune response. The composition of CMCS can inhibit bacteria of Gram-negative Escherichia coli and Gram-positive Staphylococcus aureus by destroying the membrane of bacteria. The hemostatic needle with good hemostasis efficacy, antibacterial property, and safety is promising for the prevention of bleeding-associated complications in practical applications.

Dipeptide-Based Photoreactive Instant Glue for Environmental and Biomedical Applications

Nature-inspired smart materials offer numerous advantages over environmental friendliness and efficiency. Emulating the excellent adhesive properties of mussels foot proteins, where the lysine is in close proximity with the 3,4-dihydroxy-l-phenylalanine (DOPA), we report the synthesis of a novel photocurable peptide-based adhesive consisting exclusively of these two amino acids. Our adhesive is a highly concentrated aqueous solution of a monomer, a cross-linker, and a photoinitiator. Lap-shear adhesion measurements on plastic and glass surfaces and comparison with different types of commercial adhesives showed that the adhesive strength of our glue is comparable when applied in air and superior when used underwater. No toxicity of our adhesive was observed when the cytocompatibility on human dermal fibroblast cells was assessed. Preliminary experiments with various tissues and coral fragments showed that our adhesive could be applied to wound healing and coral reef restoration. Given the convenience of the facile synthesis, biocompatibility, ease of application underwater, and high adhesive strength, we expect that our adhesive may find application, but not limited, to the biomedical and environmental field.

Double Cation-π Directed Two-Dimensional Metallacycle-Based Hierarchical Self-Assemblies for Dual-Mode Catalysis

Hierarchical self-assembly of Pt(II) metallacycles for the construction of functional materials has received considerable research interest, owing to their potential to meet increasing complexity and functionality demands while being based on well-defined scaffolds. However, the fabrication of long-range-ordered Pt(II) metallacycle-based two-dimensional hierarchical self-assemblies (2D HSAs) remains a challenge, primarily because of the limitations of conventional orthogonal noncovalent interaction (NCI) motifs and the intrinsic characteristics of Pt(II) metallacycles, making the delicate self-assembly processes difficult to control. Herein, we prepare well-regulated Pt(II)-metallacycle-based 2D HSAs through a directed strategy involving double cation-π interactions derived from C3-symmetric hexagonal Pt(II) metallacycles and C2-symmetric sodium phenate monomers. Spatially confined arrays of planar Pt(II) metallacycles and the selective growth of self-assemblies at desired locations are achieved by employing strong cation-π driving forces with well-defined directionality as the second orthogonal NCI, realizing the bottom-up, three-stage construction of Pt(II)-metallacycle-based 2D HSAs. The resultant 2D HSAs are applied as dual-mode catalysis platforms, which are loaded with two different nanocatalysts, one promoting catalytic oxidation and the other promoting photocatalytic reduction.

Strong Synergistic Molecular Interaction in Catanionic Surfactant Mixtures: Unravelling the Role of the Benzene Ring

Noncovalent interactions play a crucial role in driving the formation of diverse self-assembled structures in surfactant systems. Surfactants containing a benzene ring structure are an important subset of surfactants. These surfactants exhibit unique colloid and interfacial properties, which give rise to fascinating transformations in the aggregate structures. These transformations are directly influenced by specific noncovalent interactions facilitated by the benzene ring structure including cation-π and π-π interactions. Investigating catanionic surfactant systems that incorporate benzene ring structures provides valuable insights into the distinct noncovalent interactions observed in mixed surfactant systems. Our approach involved studying the enthalpy change ΔH during the titration process, utilizing isothermal titration calorimetry (ITC). Simultaneously, we employed cryogenic transmission electron microscopy (cryo-TEM) to observe the corresponding self-assembly structures. To gain further insight, we delved into the noncovalent interactions of the mixed systems by analyzing the molecular environments variations through chemical shifts of the aggregates using proton magnetic resonance (1H NMR). The intermolecular interaction was also confirmed by the two-dimensional nuclear Overhauser enhancement spectroscopy (2D NOESY). We conducted a systematic study of the effects of NaCl concentrations, molar ratios, and molecular structures of surfactants on aggregate structures. The existence forms of surfactants are closely linked to the shape of the titration curve and the transition of the aggregate structures. When cationic surfactants were titrated into sodium dodecylbenzenesulfonate (SDBS) micelle solutions, the dominant cation-π interaction leads to the direct formation of vesicle structures. Conversely, when the SDBS system is titrated into benzyldimethyldodecylammonium chloride (DDBAC) micelles, a delicate balance of multiple noncovalent interactions, including cation-π, π-π, hydrophobic, and electrostatic forces, results in a range of aggregate structure transformations such as worm-like micelles and vesicular structures.

Facile Synthesis of Catechol-Containing Polyacrylamide Copolymers: Synergistic Effects of Amine, Amide and Catechol Residues in Mussel-Inspired Adhesives

The straightforward synthesis of polyamide-derived statistical copolymers with catechol, amine, amide and hydroxy residues via free radical polymerization is presented. In particular, catechol, amine and amide residues are present in natural mussel foot proteins, enabling strong underwater adhesion due to synergistic effects where cationic residues displace hydration and ion layers, followed by strong short-rang hydrogen bonding between the catechol or primary amides and SiO2 surfaces. The present study is aimed at investigating whether such synergistic effects also exist for statistical copolymer systems that lack the sequence-defined positioning of functional groups in mussel foot proteins. A series of copolymers is established and the adsorption in saline solutions on SiO2 is determined by quartz crystal microbalance measurements and ellipsometry. These studies confirm a synergy between cationic amine groups with catechol units and primary amide groups via an increased adsorptivity and increased polymer layer thicknesses. Therefore, the free radical polymerization of catechol, amine and amide monomers as shown here may lead to simplified mussel-inspired adhesives that can be prepared with the readily scalable methods required for large-scale applications.

Mussel-Inspired, Underwater Self-Healing Ionoelastomers Based on α-Lipoic Acid for Iontronics

Weak adhesion and lack of underwater self-healability hinder advancing soft iontronics particularly in wet environments like sweaty skin and biological fluids. Mussel-inspired, liquid-free ionoelastomers are reported based on seminal thermal ring-opening polymerization of a biomass molecule of α-lipoic acid (LA), followed by sequentially incorporating dopamine methacrylamide as a chain extender, N,N'-bis(acryloyl) cystamine, and lithium bis(trifluoromethanesulphonyl) imide (LiTFSI). The ionoelastomers exhibit universal adhesion to 12 substrates in both dry and wet states, superfast self-healing underwater, sensing capability for monitoring human motion, and flame retardancy. The underwater self-repairabilitiy prolongs over three months without deterioration, and sustains even when mechanical properties greatly increase. The unprecedented underwater self-mendability benefits synergistically from the maximized availability of dynamic disulfide bonds and diverse reversible noncovalent interactions endowed by carboxylic groups, catechols, and LiTFSI, along with the prevented depolymerization by LiTFSI and tunability in mechanical strength. The ionic conductivity reaches 1.4 × 10^-6 -2.7 × 10^-5 S m^-1 because of partial dissociation of LiTFSI. The design rationale offers a new route for creating a wide range of LA- and sulfur-derived supramolecular (bio)polymers with superior adhesion, healability, and other functionalities, and thus has technological implications for coatings, adhesives, binders and sealants, biomedical engineering and drug delivery, wearable and flexible electronics, and human-machine interfaces.

Molecular Design and Mechanism Analysis of Phthalic Acid Ester Substitutes: Improved Biodegradability in Processes of Sewage Treatment and Soil Remediation

Phthalic acid esters (PAEs) have the characteristics of environmental persistence. Therefore, improving the biodegradability of PAEs is the key to reducing the extent of ecological harm realized. Firstly, the scoring function values of PAEs docking with various degrading enzymes in sewage treatment were calculated. Based on this, a 3D-quantitative structure-activity relationship (3D-QSAR) model for PAE biodegradability was built, and 38 PAE substitutes were created. By predicting the endocrine-disrupting toxicity and functions of PAE substitutes, two types of PAE substitutes that are easily degraded by microorganisms, have low toxicity, and remain functional were successfully screened. Meanwhile, the differences in the mechanism of molecular degradation difference before and after PAE modification were analyzed based on the distribution characteristics of amino acid residues in the molecular docking complex. Finally, the photodegradability and microbial degradability of the PAE substitutes in the soil environment was evaluated. From the 3D-QSAR model design perspective, the modification mechanism of PAE substitutes suitable for sewage treatment and soil environment degradation was analyzed. We aim to improve the biodegradability of PAEs at the source and provide theoretical support for alleviating the environmental hazards of using PAEs.

Bio-inspired adhesive hydrogel for biomedicine-principles and design strategies

The adhesiveness of hydrogels is urgently required in various biomedical applications such as medical patches, tissue sealants, and flexible electronic devices. However, biological tissues are often wet, soft, movable, and easily damaged. These features pose difficulties for the construction of adhesive hydrogels for medical use. In nature, organisms adhere to unique strategies, such as reversible sucker adhesion in octopuses and nontoxic and firm catechol chemistry in mussels, which provide many inspirations for medical hydrogels to overcome the above challenges. In this review, we systematically classify bioadhesion strategies into structure-related and molecular-related ones, which cover almost all known bioadhesion paradigms. We outline the principles of these strategies and summarize the corresponding designs of medical adhesive hydrogels inspired by them. Finally, conclusions and perspectives concerning the development of this field are provided. For the booming bio-inspired adhesive hydrogels, this review aims to summarize and analyze the various existing theories and provide systematic guidance for future research from an innovative perspective.

Robust and multifunctional natural polyphenolic composites for water remediation

The scarcity of clean water has become a global environmental problem which constrains the development of public health, economy, and sustainability. In recent years, natural polyphenols have drawn increasing interests as promising platforms towards diverse water remediation composites and devices, owing to their abundant and renewable resource in nature, highly active surface chemistry, and multifunctionality. This review aims to summarize the most recent advances and highlights of natural polyphenol-based composite materials (e.g., nanofibers, membranes, particles, and hydrogels) for water remediation, by focusing on their structural and functional features, as well as their diversified applications including membrane filtration, solar distillation, adsorption, advanced oxidation processes, and disinfection. Finally, the future challenges in this field are also prospected. It is anticipated that this review will provide new opportunities towards the future development of natural polyphenols and other kinds of naturally occurring molecules in water purification applications.

Insights into High-Performance and Selective Elimination of Cationic Dye from Multicomponent Systems by Using Fe-Based Metal-Organic Frameworks

Metal-organic frameworks (MOFs), especially Fe-MOFs, have shown prospective application in eliminating organic dyes from wastewater due to their well-developed pores, water stability, easy preparation, and economy. Herein, we synthesized four types of Fe-MOFs (such as MIL-88A, MIL-88B, MIL-100, and MIL-101) using the hydrothermal method. The products were analyzed with several methods. By comparing the adsorption effect of those four types of Fe-MOFs on three kinds of dyes, it has been shown that MIL-100 owns the best adsorption efficiency on cationic organic dyes methylene blue (MB) and Rhodamine B (RhB) in 180 min, while all MOFs have slight removal capacity on methyl orange (MO). MIL-100, as an adsorbent, was studied under various research conditions, and the maximum removal efficiencies to MB, RhB, and MO were found to be up to 97.36%, 88.75%, and 13.00%, respectively. Furthermore, cationic dye MB's removal by MIL-100 was fitted with a pseudo-second-order model and Langmuir isotherm model (Q_m = 411.041 mg/g) by adsorption kinetics and isotherms research, and MIL-100 could rapidly and selectively divide MB from a binary complex aqueous solution of MB and MO. The as-fabricated MIL-100 also exhibited excellent recyclability after four adsorption-desorption recycles and can be treated as a potential substance with high removal efficiency of cationic organic dye-containing industrial effluents.

Robust Natural Polyphenolic Adhesives against Various Harsh Environments

Although adhesive hydrogels have been extensively explored, the development of adhesives with long-term strong adhesion capacity under various harsh environments is still met with profound challenges such as sophisticated preparation, long-term curing, and low bonding strength. Herein, a series of robust adhesive hydrogels have been developed via the polyphenol-epoxy-cross-linking (PEC) reactions between natural polyphenols (extracts) and epoxy glycidyl ethers. The as-prepared natural polyphenolic adhesive hydrogels could induce strong adhesion onto several kinds of typical substrates (i.e., wood, glass, paper, PET, PMMA, and Fe) under both dry and wet conditions based on multi-interactions. Moreover, those natural polyphenolic adhesives exhibited good low-temperature and solvent resistance performances, which could be widely used in different kinds of device repairment (i.e., chemical, petroleum, wood, metal, glass, plastic, rubber, and other industries) under different conditions. This work could provide new opportunities toward natural-inspired robust adhesives in various fields ranging from chemical transportation, industrial manufacturing, architectural design, and marine engineering to daily life.