Even the Odd Numbers Help: Failure Modes of SAM-Based Tunnel Junctions Probed via Odd-Even Effects Revealed in Synchrotrons and Supercomputers

Odd-Even Effects in the Structure and Thermal Stability of Carboxylic Acid Anchored Monolayers on Naturally Oxidized Aluminum Surface

Self-assembled monolayers (SAMs) are broadly used for molecular engineering of surfaces and interfaces, which demands control over their structure and properties. An important tool in this context is the so-called odd-even effects exploiting the dependence of the SAM structure on the parity of the number of building blocks forming the backbone of SAM-building molecules. Even though these effects influence parameters crucial for SAM applications, they have been mainly studied on coinage metals (Au and Ag) until now. Here, using the series of biphenyl-substituted carboxylic acids (BPnCOO, n = 0-4), we show that structural odd-even behavior occurs as well on technologically relevant surface of naturally oxidized aluminum (representative of other oxide surfaces), with the even-numbered monolayers exhibiting higher packing density and lower molecular inclination than the odd-numbered analogs. Despite these structural changes, the SAM desorption energy remains nearly constant at a high value (∼1.5 eV) making BPnCOO/AlOx a promising system for organic electronics applications.

Macrocyclic catalysis mediated by water: opportunities and challenges

Nanospaces within enzymes play a crucial role in chemical reactions in biological systems, garnering significant attention from supramolecular chemists. Inspired by the highly efficient catalysis of enzymes, artificial supramolecular hosts have been developed and widely employed in various reactions, paving the way for innovative and selective catalytic processes and offering new insights into enzymatic catalytic mechanisms. In supramolecular macrocycle systems, weak non-covalent interactions are exploited to enhance substrate solubility, increase local concentration, and stabilize the transition state, ultimately accelerating reaction rates and improving product selectivity. In this review, we will focus on the opportunities and challenges associated with the catalysis of chemical reactions by supramolecular macrocycles in the aqueous phase. Key issues to be discussed include limitations in molecular interaction efficiency in aqueous media, product inhibition, and the incompatibility of catalysts or conditions in "one-pot" reactions.

Correcting Edge Defects in Self-Assembled Monolayers through Thermal Annealing

Self-assembled monolayers (SAMs) are emerging as platform technology for a myriad of applications, yet they still possess varied spatial stability and predictability issues as their properties are heavily dependent on subtle structural features. Reducing entropy within such a system serves as one of many potential solutions to increase order and therefore coherence/precision in measured properties. Here we explore controlled thermal annealing to improve edge disorders in SAMs and significantly reduce data variance. Using both odd- and even-numbered n-alkanethiol SAMs on Au, we observe statistically significant difference in the contact angles between edge and center. Thermal annealing at 40 °C significantly narrows differences between edges and centre of the SAM, albeit with significant reduction in the parity dependent odd-even effect. This study provides a pathway to improve SAMs consistency through minimal external perturbation as reflected by the minimization of odd-even effect as SAMs become increasingly ordered.

Supramolecular tunnelling junctions with robust high rectification based on assembly effects

The performance of large-area molecular diodes can in rare cases approach the lower limit of commercial semiconductor devices but predictive structure-property design remains difficult as the rectification ratio (R) achieved by self-assembled monolayer (SAM) based diodes depends on several intertwined parameters. This paper describes a systematic approach to achieve high rectification in bisferrocenyl-based molecular diodes, HSCnFc-CC-Fc (n = 9-15) immobilised on metal surfaces (Ag, Au and Pt). Experiments supported by molecular dynamics simulations show that the molecular length and bottom electrode influence the SAM packing, which affects the breakdown voltage (VBD), the associated maximum R (Rmax), and the bias at which the Rmax is achieved (Vsat,R). From the electrical characterisation of the most stable Pt-SCnFc-CC-Fc//GaOx/EGaIn junctions, we found that VBD, Vsat,R, and Rmax all scale linearly with the spacer length of Cn, and that Rmax for all the SAMs consistently exceeds the "Landauer limit" of 103. Our data shows that the robust switching of M-SCnFc-CC-Fc//GaOx/EGaIn junctions is the result of the combined optimisation of parameters involving the molecular structure, the type of metal substrate, and the applied operating conditions (bias window), to create stable and high-performance junctions.

Molecular rectification induced by magnetization alignment in organic-ferromagnetic devices

Spin-dependent transport in ferromagnet/organic-ferromagnet/ferromagnet junctions is investigated theoretically under different alignment of magnetization orientations. The results demonstrate a significant current rectification at low bias voltages, and the rectifying direction relies on the relative magnetization orientation in each component. The orbital analysis demonstrates two underlying mechanisms for the rectification, the slight structural asymmetry of the molecule from spin radicals and distinct spin match between conducting electrons and the magnetic molecule upon the reversal of bias. The latter is responsible for the strong low-bias rectification and relies on the magnetization alignment. The effects of parameter strength, temperature and size on the rectification are discussed. This work explores a new route to achieve high-performance molecular rectifiers operating at low bias with controlled rectifying direction.

Extreme long-lifetime self-assembled monolayer for air-stable molecular junctions

The molecular electronic devices based on self-assembled monolayer (SAM) on metal surfaces demonstrate novel electronic functions for device minimization yet are unable to realize in practical applications, due to their instability against oxidation of the sulfur-metal bond. This paper describes an alternative to the thiolate anchoring group to form stable SAMs on gold by selenides anchoring group. Because of the formation of strong selenium-gold bonds, these stable SAMs allow us to incorporate them in molecular tunnel junctions to yield extremely stable junctions for over 200 days. A detailed structural characterization supported by spectroscopy and first-principles modeling shows that the oxidation process is much slower with the selenium-gold bond than the sulfur-gold bond, and the selenium-gold bond is strong enough to avoid bond breaking even when it is eventually oxidized. This proof of concept demonstrates that the extraordinarily stable SAMs derived from selenides are useful for long-lived molecular electronic devices and can possibly become important in many air-stable applications involving SAMs.

Supramolecular Memristor Based on Bistable [2]Catenanes: Toward High-Density and Non-Volatile Memory Devices

The ever-increasing demand for data storage and neuromorphic computing calls for innovative, high-density solutions, such as resistive random-access memory (RRAM). However, the integration of resistive switching and rectification at the nanoscale remains a formidable challenge. In this study, we introduce a bistable [2]catenane-based supramolecular junction that simultaneously functions as a resistive switch and a diode. All supramolecular junctions are highly stable and reproducible over thousands of resistive switching cycles, because the nano-confinement of two mechanically interlocked rings can stabilize the radical states of pyridinium moieties under ambient conditions. The successful realization of supramolecular junctions in functionality with a thickness of approximately 2 nm presents a promising avenue for the development of molecule-scale based RRAM for a better solution to high density and energy efficiency.

Molecular Electronics: Creating and Bridging Molecular Junctions and Promoting Its Commercialization

Molecular electronics is driven by the dream of expanding Moore's law to the molecular level for next-generation electronics through incorporating individual or ensemble molecules into electronic circuits. For nearly 50 years, numerous efforts have been made to explore the intrinsic properties of molecules and develop diverse fascinating molecular electronic devices with the desired functionalities. The flourishing of molecular electronics is inseparable from the development of various elegant methodologies for creating nanogap electrodes and bridging the nanogap with molecules. This review first focuses on the techniques for making lateral and vertical nanogap electrodes by breaking, narrowing, and fixed modes, and highlights their capabilities, applications, merits, and shortcomings. After summarizing the approaches of growing single molecules or molecular layers on the electrodes, the methods of constructing a complete molecular circuit are comprehensively grouped into three categories: 1) directly bridging one-molecule-electrode component with another electrode, 2) physically bridging two-molecule-electrode components, and 3) chemically bridging two-molecule-electrode components. Finally, the current state of molecular circuit integration and commercialization is discussed and perspectives are provided, hoping to encourage the community to accelerate the realization of fully scalable molecular electronics for a new era of integrated microsystems and applications.

Optical properties of plasmonic tunneling junctions

Over the last century, quantum theories have revolutionized our understanding of material properties. One of the most striking quantum phenomena occurring in heterogeneous media is the quantum tunneling effect, where carriers can tunnel through potential barriers even if the barrier height exceeds the carrier energy. Interestingly, the tunneling process can be accompanied by the absorption or emission of light. In most tunneling junctions made of noble metal electrodes, these optical phenomena are governed by plasmonic modes, i.e., light-driven collective oscillations of surface electrons. In the emission process, plasmon excitation via inelastic tunneling electrons can improve the efficiency of photon generation, resulting in bright nanoscale optical sources. On the other hand, the incident light can affect the tunneling behavior of plasmonic junctions as well, leading to phenomena such as optical rectification and induced photocurrent. Thus, plasmonic tunneling junctions provide a rich platform for investigating light-matter interactions, paving the way for various applications, including nanoscale light sources, sensors, and chemical reactors. In this paper, we will introduce recent research progress and promising applications based on plasmonic tunneling junctions.

Smart Eutectic Gallium-Indium: From Properties to Applications

Eutectic gallium-indium (EGaIn), a liquid metal with a melting point close to or below room temperature, has attracted extensive attention in recent years due to its excellent properties such as fluidity, high conductivity, thermal conductivity, stretchability, self-healing capability, biocompatibility, and recyclability. These features of EGaIn can be adjusted by changing the experimental condition, and various composite materials with extended properties can be further obtained by mixing EGaIn with other materials. In this review, not only the are unique properties of EGaIn introduced, but also the working principles for the EGaIn-based devices are illustrated and the developments of EGaIn-related techniques are summarized. The applications of EGaIn in various fields, such as flexible electronics (sensors, antennas, electronic circuits), molecular electronics (molecular memory, opto-electronic switches, or reconfigurable junctions), energy catalysis (heat management, motors, generators, batteries), biomedical science (drug delivery, tumor therapy, bioimaging and neural interfaces) are reviewed. Finally, a critical discussion of the main challenges for the development of EGaIn-based techniques are discussed, and the potential applications in new fields are prospected.

Chemical Conformation Induced Transport Carrier Switching in Molecular Junction based on Carboxylic-Terminated Thiol Molecules

The paper demonstrates the effect of the chemical conformation of the -COOH group on the transport characteristic including conductance, rectification, and length effect in molecular junctions (MJs) formed by self-assembled monolayers of carboxylic-terminated thiol molecules. For an alkyl chain shorter than C₁₁, the transport mechanism was attributed to a direct off-resonant tunneling of a hole carrier, located at the Au-S interface, whereas a hopping mechanism was assigned to the alkyl chain longer than the C₁₁ chain located at the -COOH group. The hopping mechanism may be operated by electron transport associated with the breaking of the -OH bonding likely driven by a voltage. Importantly, at the C₁₁ alkyl chain, we observed that the transport carrier operating in MJs could change from a hole carrier into an electron carrier. The result strongly proves that the chemical conformation should be considered in analyzing molecular electronics and provides a basis for the rational design of molecular electronic devices.

The Role of Structural Order in the Mechanism of Charge Transport across Tunnel Junctions with Various Iron-Storing Proteins

In biomolecular electronics, the role of structural order in charge transport (CT) is poorly understood. It has been reported that the metal oxide cores of protein cages (e.g., iron oxide and ferrihydrite nanoparticles (NPs) present in ferritin and E2-LFtn, which is E2 protein engineered with an iron-binding sequence) play an important role in the mechanism of CT. At the same time, the NP core also plays a major role in the structural integrity of the proteins. This paper describes the role of structural order in CT across tunnel junctions by comparing three iron-storing proteins. They are (1) DNA binding protein from starved cells (Dps, diameter (∅) = 9 nm); (2) engineered archaeal ferritin (AfFtn-AA, ∅ = 12 nm); and (3) engineered E2 of pyruvate dehydrogenase enzyme complex (E2-LFtn, ∅ = 25 nm). Both holo-Dps and apo-Dps proteins undergo CT by coherent tunneling because their globular architecture and relative structural stability provide a coherent conduction pathway. In contrast, apo-AfFtn-AA forms a disordered structure across which charges have to tunnel incoherently, but holo-AfFtn-AA retains its globular structure and supports coherent tunneling. The large E2-LFtn always forms disordered structures across which charges incoherently tunnel regardless of the presence of the NP core. These findings highlight the importance of structural order in the mechanism of CT across biomolecular tunnel junctions.

AFM Manipulation of EGaIn Microdroplets to Generate Controlled, On-Demand Contacts on Molecular Self-Assembled Monolayers

Liquid metal droplets, such as eutectic gallium-indium (EGaIn), are important in many research areas, such as soft electronics, catalysis, and energy storage. Droplet contact on solid surfaces is typically achieved without control over the applied force and without optimizing the wetting properties in different environments (e.g., in air or liquid), resulting in poorly defined contact areas. In this work, we demonstrate the direct manipulation of EGaIn microdroplets using an atomic force microscope (AFM) to generate repeated, on-demand making and breaking of contact on self-assembled monolayers (SAMs) of alkanethiols. The nanoscale positional control and feedback loop in an AFM allow us to control the contact force at the nanonewton level and, consequently, tune the droplet contact areas at the micrometer length scale in both air and ethanol. When submerged in ethanol, the droplets are highly nonwetting, resulting in hysteresis-free contact forces and minimal adhesion; as a result, we are able to create reproducible geometric contact areas of 0.8-4.5 μm² with the alkanethiolate SAMs in ethanol. In contrast, there is a larger hysteresis in the contact forces and larger adhesion for the same EGaIn droplet in air, which reduced the control over the contact area (4-12 μm²). We demonstrate the usefulness of the technique and of the gained insights in EGaIn contact mechanics by making well-defined molecular tunneling junctions based on alkanethiolate SAMs with small geometric contact areas of between 4 and 12 μm² in air, 1 to 2 orders of magnitude smaller than previously achieved.

Stable Universal 1- and 2-Input Single-Molecule Logic Gates

Controllable single-molecule logic operations will enable development of reliable ultra-minimalistic circuit elements for high-density computing but require stable currents from multiple orthogonal inputs in molecular junctions. Utilizing the two unique adjacent conductive molecular orbitals (MOs) of gated Au/S-(CH₂ )₃ -Fc-(CH₂ )₉ -S/Au (Fc = ferrocene) single-electron transistors (≈2 nm), a stable single-electron logic calculator (SELC) is presented, which allows real-time modulation of output current as a function of orthogonal input bias (V_b ) and gate (V_g ) voltages. Reliable and low-voltage (ǀV_b ǀ ≤ 80 mV, ǀV_g ǀ ≤ 2 V) operations of the SELC depend upon the unambiguous association of current resonances with energy shifts of the MOs (which show an invariable, small energy separation of ≈100 meV) in response to the changes of voltages, which is confirmed by electron-transport calculations. Stable multi-logic operations based on the SELC modulated current conversions between the two resonances and Coulomb blockade regimes are demonstrated via the implementation of all universal 1-input (YES/NOT/PASS_1/PASS_0) and 2-input (AND/XOR/OR/NAND/NOR/INT/XNOR) logic gates.

Metal-Molecule-Metal Junctions on Self-Assembled Monolayers Made with Selective Electroless Deposition

Electronic transport through molecular-scale devices has been studied extensively for its extraordinary dimension superiority. Assembling such devices into large-scale functional circuits is crucial since the molecular tunnel junctions must be reliable, stable and reproducible during technological applications. In ideal circumstances, the device architecture should be designed such that the metal-molecule-metal (MMM) junctions can be analyzed by the more sensitive four point probe system. In this paper, we expound a delicate method to manufacture molecular junctions, which show excellent stability and reproducibility with high yields (>91 per cent). We form self-assembled monolayers (SAMs) on conductive Au thin film by microcontact printing and then generate robust covalently bound metal thin film electrodes on top of the SAMs by selective electroless deposition. Following MMM junction formation, a photoresist is coated and wells are opened on each feature by lithography. Then, Au thin film, as a permanent top electrode, is deposited into the photolithographically defined well. Conductivity analyzations were carried out on the 50 μm square junctions by the four point probe measurement, and the results showed reproducible tunneling I-V characteristics. This method reveals an approach not only offering a unique vehicle to investigate the electrical properties of molecule ensembles in MMMs, but also making a significant step toward MMM applications at the device level.

Role of Order in the Mechanism of Charge Transport across Single-Stranded and Double-Stranded DNA Monolayers in Tunnel Junctions

Deoxyribonucleic acid (DNA) has been hypothesized to act as a molecular wire due to the presence of an extended π-stack between base pairs, but the factors that are detrimental in the mechanism of charge transport (CT) across tunnel junctions with DNA are still unclear. Here we systematically investigate CT across dense DNA monolayers in large-area biomolecular tunnel junctions to determine when intrachain or interchain CT dominates and under which conditions the mechanism of CT becomes thermally activated. In our junctions, double-stranded DNA (dsDNA) is 30-fold more conductive than single-stranded DNA (ssDNA). The main reason for this large change in conductivity is that dsDNA forms ordered monolayers where intrachain tunneling dominates, resulting in high CT rates. By varying the temperature T and the length of the DNA fragments in the junctions, which determines the tunneling distance, we reveal a complex interplay between T, the length of DNA, and structural order on the mechanism of charge transport. Both the increase in the tunneling distance and the decrease in structural order result in a change in the mechanism of CT from coherent tunneling to incoherent tunneling (hopping). Our results highlight the importance of the interplay between structural order, tunneling distance, and temperature on the CT mechanism across DNA in molecular junctions.

Molecular Structure Effect of a Self-Assembled Monolayer on Thermal Resistance across an Interface

Understanding heat transfer across an interface is essential to a variety of applications, including thermal energy storage systems. Recent studies have shown that introducing a self-assembled monolayer (SAM) can decrease thermal resistance between solid and fluid. However, the effects of the molecular structure of SAM on interfacial thermal resistance (ITR) are still unclear. Using the gold–SAM/PEG system as a model, we performed nonequilibrium molecular dynamics simulations to calculate the ITR between the PEG and gold. We found that increasing the SAM angle value from 100° to 150° could decrease ITR from 140.85 × 10⁻⁹ to 113.79 × 10⁻⁹ m² K/W owing to penetration of PEG into SAM chains, which promoted thermal transport across the interface. Moreover, a strong dependence of ITR on bond strength was also observed. When the SAM bond strength increased from 2 to 640 kcal⋅mol−1Å−2, ITR first decreased from 106.88 × 10⁻⁹ to 102.69 × 10⁻⁹ m² K/W and then increased to 123.02 × 10⁻⁹ m² K/W until reaching a steady state. The minimum ITR was obtained when the bond strength of SAM was close to that of PEG melt. The matching vibrational spectra facilitated the thermal transport between SAM chains and PEG. This work provides helpful information regarding the optimized design of SAM to enhance interfacial thermal transport.

Quantum Tunneling Induced Optical Rectification and Plasmon-Enhanced Photocurrent in Nanocavity Molecular Junctions

Molecular junctions offer the opportunity for downscaling optoelectronic devices. Separating two electrodes with a single layer of molecules accesses the quantum-tunneling regime at low voltages (<1 V), where tunneling currents become highly sensitive to local nanometer-scale geometric features of the electrodes. These features generate asymmetries in the electrical response of the junction which combine with the incident oscillating optical fields to produce optical rectification and photocurrents. Maximizing photocurrents requires accurate control of the overall junction geometry and a large confined optical field in the optimal location. Plasmonic nanostructures such as metallic nanoparticles are prime candidates for this application, because their size and shape dictate a consistent junction geometry while strongly enhancing the optical field from incident light. Here we demonstrate a robust lithography-free molecular optoelectronic device geometry, where a metallic nanoparticle on a self-assembled molecular monolayer is sandwiched between planar bottom and semitransparent top electrodes, to create molecular junctions with reproducible morphology and electrical response. The well-defined geometry enables predictable and intense plasmonic localization, which we show creates optical-frequency voltages ∼ 30 mV in the molecular junction from 100 μW incident light, generating photocurrent by optical rectification (>10 μA/W) from only a few hundred molecules. Quantitative agreement is thus obtained between DC- and optical-frequency quantum-tunneling currents, predicted by a simple analytic equation. By measuring the degree of junction asymmetry for different molecular monolayers, we find that molecules with a large DC rectification ratio also boost zero-bias electrical asymmetry, making them good candidates for sensing and energy harvesting applications in combination with plasmonic nanomaterials.

Molecular Conformation in Charge Tunneling across Large-Area Junctions

Self-assembled monolayers are predicated on thermodynamic equilibrium; hence, their properties project accessible relaxation pathways. Herein, we demonstrate that charge tunneling correlates with conformational degrees of freedom(s). Results from open chain and cyclic head groups show that, as expected, distribution in tunneling data correlates with the orientation of the head group, akin to the odd-even effect and more importantly the degree of conformational freedom, but fluctuates with applied bias. Trends in nature of distributions in current density illuminate the need for higher statistical moments in understanding these rather dynamic systems. We employ skewness, kurtosis, and estimation plots to show that the conformational degree of freedom in the head group significantly amplifies the odd-even effect and may lead to enhanced or perturbed tunneling based on whether the head group is on an odd- or even-parity spacer.

Strain sensors fabricated by surface assembly of nanoparticles

Harnessing interparticle spatial properties of surface assembly of nanoparticles (SAN) on flexible substrates is a rapidly emerging front of research in the design and fabrication of highly-sensitive strain sensors. It has recently shown promising potentials for applications in wearable sensors and skin electronics. SANs feature 3D structural tunability of the interparticle spatial properties at both molecular and nanoscale levels, which is transformative for the design of intriguing strain sensors. This review will present a comprehensive overview of the recent research development in exploring SAN-structured strain sensors for wearable applications. It starts from the basic principle governing the strain sensing characteristics of SANs on flexible substrates in terms of thermally-activated interparticle electron tunneling and conductive percolation. This discussion is followed by descriptions of the fabrication of the sensors and the proof-of-concept demonstrations of the strain sensing characteristics. The nanoparticles in the SANs are controllable in terms of size, shape, and composition, whereas the interparticle molecules enable the tunability of the electrical properties in terms of interparticle spatial properties. The design of SAN-derived strain sensors is further highlighted by describing several recent examples in the explorations of their applications in wearable biosensor and bioelectronics. Fundamental understanding of the role of interparticle spatial properties within SANs at both molecular and device levels is the focal point. The future direction of the SAN-derived wearable sensors will also be discussed, shining lights on a potential paradigm shift in materials design in exploring the emerging opportunities in wearable sensors and skin electronics.

Bias-Polarity-Dependent Direct and Inverted Marcus Charge Transport Affecting Rectification in a Redox-Active Molecular Junction

This paper describes the transition from the normal to inverted Marcus region in solid-state tunnel junctions consisting of self-assembled monolayers of benzotetrathiafulvalene (BTTF), and how this transition determines the performance of a molecular diode. Temperature-dependent normalized differential conductance analyses indicate the participation of the HOMO (highest occupied molecular orbital) at large negative bias, which follows typical thermally activated hopping behavior associated with the normal Marcus regime. In contrast, hopping involving the HOMO dominates the mechanism of charge transport at positive bias, yet it is nearly activationless indicating the junction operates in the inverted Marcus region. Thus, within the same junction it is possible to switch between Marcus and inverted Marcus regimes by changing the bias polarity. Consequently, the current only decreases with decreasing temperature at negative bias when hopping is "frozen out," but not at positive bias resulting in a 30-fold increase in the molecular rectification efficiency. These results indicate that the charge transport in the inverted Marcus region is readily accessible in junctions with redox molecules in the weak coupling regime and control over different hopping regimes can be used to improve junction performance.

Electrostatic gating of single-molecule junctions based on the STM-BJ technique

The gating of charge transport through single-molecule junctions is considered a critical step towards molecular circuits but remains challenging. In this work, we report an electrostatic gating method to tune the conductance of single-molecule junctions using the scanning tunneling microscope break junction (STM-BJ) technique incorporated with a back-gated chip as a substrate. We demonstrated that the conductance varied at different applied gating voltages (Vgs). The HOMO-dominated molecules show a decrease in conductance with an increase in Vg, and the LUMO-dominated molecules show the opposite trend. The measured conductance trends with Vg are consistent with the transition voltage spectroscopy measurements. Moreover, the transmission functions simulated from density functional theory (DFT) calculations and the finite element analysis all suggest that Vg changed the energy alignment of the molecular junction. This work provides a simple method for modulating the molecular orbitals' alignment relative to the Fermi energy (Ef) of metal electrodes to explore the charge transport properties at the single-molecule scale.

Solid State Dilution Controls Marcus Inverted Transport in Rectifying Molecular Junctions

Traditional Marcus theory accounts for electron transfer reactions in solutions, and the polarity of solvent molecule matters for them. How such an environment polarity affects electron transfer reactions in solid-state devices, however, remains uncertain. This paper describes how the Marcus inverted charge transport is influenced by solid-state molecular dilution in large-area tunneling junctions. A monolayer of 2,2'-bipyridyl terminated n-alkanethiolate (SC₁₁BIPY), which rectifies currents via electron hopping within the inverted regime, is diluted with n-alkanethiolate (SC_n) of different lengths (n = 8, 10, or 18) or at different surface mole fractions. The dilution introduces nonpolar environments within the monolayer, hinders stabilization of charged BIPY species upon electron hopping, and pushes the equilibrium of BIPY ⇄ BIPY^•- process toward the reverse direction. Our work demonstrates that solid-state molecular dilution permits systematic control of the environment polarity of active component in nanoscale devices, much like solvent polarity control in solution, and their performances.

Carbon supported hybrid catalysts for controlled product selectivity in the hydrosilylation of alkynes

A series of Rh- and Ir-hybrid catalysts with varying tether lengths has been prepared by immobilization of Rh^I, Rh^III and Ir^III complexes on carbon black, and applied in the hydrosilylation of alkynes.

Large Increase in the Dielectric Constant and Partial Loss of Coherence Increases Tunneling Rates across Molecular Wires

Although the dielectric behavior of monolayers is important in a large range of applications, its role in charge transport studies involving molecular junctions is largely ignored. This paper describes a large increase in the relative static dielectric constant (ε_r) by simply increasing the thickness of well-organized monolayers of oligoglycine and oligo(ethylene glycol) from 7 up to 14. The resulting large capacitance of 3.5-5.1 μF/cm² is thickness-independent, which is highly attractive for field-effect transistor applications. This increase of ε_r results in a linear increase of the thermal activation energy by a factor of 6, which suggests that the mechanism of charge transport gradually changes from coherent to (partially) incoherent tunneling. The comparisons of oligoglycine (which readily forms hydrogen bonds with neighboring molecules) and methyl terminated oligo(ethylene glycol) (which lacks hydrogen bond donors) monolayers, kinetic isotope effects, and relative humidity-dependent measurements all indicate the importance of strong hydrogen bonds involving ionic species and strongly bonded water in the unusual dielectric behavior and the incoherent tunneling mechanism. This partial loss of coherence of the charge carriers can explain the unusually small tunneling decay coefficients across long molecular wires, and the length-dependent increase of ε_r of monolayers opens up interesting new applications.

Molecular Origin of the Odd-Even Effect of Macroscopic Properties of n-Alkanethiolate Self-Assembled Monolayers: Bulk or Interface?

Elucidating the influence of the monolayer interface versus bulk on the macroscopic properties (e.g., surface hydrophobicity, charge transport, and electron transfer) of organic self-assembled monolayers (SAMs) chemically anchored to metal surfaces is a challenge. This article reports the characterization of prototypical SAMs of n-alkanethiolates on gold (CH₃(CH₂)_nSAu, n = 6-19) at the macroscopic scale by electrochemical impedance spectroscopy and contact angle goniometry, and at the molecular level, by infrared reflection absorption spectroscopy. The SAM capacitance, dielectric constant, and surface hydrophobicity exhibit dependencies on both the length (n) and parity (n_odd or n_even) of the polymethylene chain. The peak positions of the CH₂ stretching modes indicate a progressive increase in the chain conformational order with increasing n between n = 6 and 16. SAMs of n_odd have a greater degree of structural gauche defects than SAMs of n_even. The peak intensities and positions of the CH₃ stretching modes are chain length independent but show an odd-even alternation of the spatial orientation of the terminal CH₃. The correlations between the different data trends establish that the chain length dependencies of the dielectric constant and surface hydrophobicity originate from changes in the polymethylene chain conformation (bulk), while the odd-even variation arises primarily from a difference in the chemical composition of the interface related to the terminal group orientation. These findings provide new physical insights into the structure-property relation of SAMs for the design of ultrathin film dielectrics as well as the understanding of stereostructural effects on the electrical characteristics of tunnel junctions.

Systematic Modulation of Charge Transport in Molecular Devices through Facile Control of Molecule-Electrode Coupling Using a Double Self-Assembled Monolayer Nanowire Junction

We report a novel solid-state molecular device structure based on double self-assembled monolayers (D-SAM) incorporated into the suspended nanowire architecture to form a "Au|SAM-1||SAM-2|Au" junction. Using commercially available thiol molecules that are devoid of synthetic difficulty, we constructed a "Au|S-(CH2)6-ferrocene||SAM-2|Au" junction with various lengths and chemical structures of SAM-2 to tune the coupling between the ferrocene conductive molecular orbital and electrode of the junction. Combining low noise and a wide temperature range measurement, we demonstrated systematically modulated conduction depending on the length and chemical nature of SAM-2. Meanwhile, the transport mechanism transition from tunneling to hopping and the intermediate state accompanied by the current fluctuation due to the coexistence of the hopping and tunneling transport channels were observed. Considering the versatility of this solid-state D-SAM in modulating the electrode-molecule interface and electroactive groups, this strategy thus provides a novel facile strategy for tailorable nanoscale charge transport studies and functional molecular devices.

N-Heterocyclic Carbenes for the Self-Assembly of Thin and Highly Insulating Monolayers with High Quality and Stability

As an organic nanostructure, self-assembled monolayers (SAMs) play a central role in many aspects of nanotechnology, including molecular electronics. In this work, we show that SAMs based on N-heterocyclic carbenes on a Au(111) substrate offer a high level of crystallinity and also exhibit the highest possible packing density. As a result of this structural optimization, defect concentrations were reduced by 2-3 orders of magnitude and thermal stability was ∼100 K higher than those of any other SAMs on Au. The conductivity of these SAMs is ∼4 orders of magnitude lower than that of standard alkanethiols of comparable length, which together with very low defect concentration and high thermal stability makes them a highly interesting material for potential application in organic thin film transistors. The self-assembly of such dense, highly crystalline, and notably stable structures is associated with strong C-Au bonding and the rational design of assembled molecules, resulting in the high mobility of both adsorbate and substrate atoms, as confirmed by the size of the molecular domains and the adsorbate-driven modification of the Au(111) substrate, respectively.

Electric-Field-Induced Connectivity Switching in Single-Molecule Junctions

The manipulation of molecule-electrode interaction is essential for the fabrication of molecular devices and determines the connectivity from electrodes to molecular components. Although the connectivity of molecular devices could be controlled by molecular design to place anchor groups in different positions of molecule backbones, the reversible switching of such connectivities remains challenging. Here, we develop an electric-field-induced strategy to switch the connectivity of single-molecule junctions reversibly, leading to the manipulation of different connectivities in the same molecular backbone. Our results offer a new concept of single-molecule manipulation and provide a feasible strategy to regulate molecule-electrode interaction.

•

A strategy to in-situ switch the connectivity of single-molecule junctions

•

A concept to manipulate the molecule-electrode interaction

•

A molecular switch triggered by the varying of electric field

•

Experiments were combined with calculations to probe the switching mechanism

A simple vaporous probe with atomic-scale sensitivity to structural ordering and orientation of molecular assembly

Understanding the structural ordering and orientation of interfacial molecular assemblies requires an insight into the penetration depth of the probe molecules which determines the interfacial reactivity. In contrast to the conventional liquid probe-based contact angle measurement in which penetration depth is complicated by the liquid cohesive interaction, we report here a new approach that features a simple combination of vaporous hexane, which involves only van der Waals interaction, and quartz crystal microbalance operated at the third harmonic resonance, which is sensitive to sub-monolayer (0.2%) adsorption. Using this combination, we demonstrated the ability of probing the structural ordering and orientation of the self-assembled monolayers with a sensitivity from penetrating the top portion of the monolayers to interacting with the very top atomic structure at the interface. The determination of the dependence of the adsorption energy of vaporous hexane on the penetration depth in the molecular assembly allowed us to further reveal the atomic-scale origin of the odd-even oscillation, which is also substantiated by density functional theory calculations. The findings have broader implications for designing interfacial reactivities of molecular assemblies with atomic-scale depth precision.

Rectification Ratio and Tunneling Decay Coefficient Depend on the Contact Geometry Revealed by in Situ Imaging of the Formation of EGaIn Junctions

This paper describes how the intensive (tunneling decay coefficient β and rectification ratio R) and extensive (current density J) properties of Ag-S(CH₂) _n-1CH₃//GaO _x/EGaIn junctions ( n = 10, 14, 18) and molecular diodes of the form of Ag-S(CH₂)₁₁Fc//GaO _x/EGaIn depend on A_geo, the contact area between the self-assembled monolayer and the cone-shaped EGaIn tip. Large junctions with A_geo ≥ 1000 μm² are unreliable and defects, such as pinholes, dominate the charge transport characteristics. For S(CH₂)₁₁Fc SAMs, R decreases from 130 to unity with increasing A_geo due to an increase in the leakage current (the current flowing across the junction at reverse bias when the diodes block current flow). The value of β decreases from 1.00 ± 0.06 n^-1 to 0.70 ± 0.03 n^-1 with increasing A_geo which also indicates that large junctions suffer from defects. Small junctions with A_geo ≤ 300 μm² are not stable due to the high surface tension of the bulk EGaIn resulting in unstable EGaIn tips. In addition, the contact area for such small junctions is dominated by the rough tip apex reducing the effective contact area and reproducibility significantly. The contact area of very large junctions is dominated by the relatively smooth side walls of the tips. Our findings show that there is an optimum range for the value of A_geo between 300-500 μm² where the electrical properties of the junctions are dominated by molecular effects. In this range of A_geo, the value of J (defined by I/ A_geo where I is the measured current) increases with A_geo until it plateaus for junctions with A_geo > 1000 μm² in agreement with recently reported findings by the Whitesides group. In this regime reproducible measurements of J can be obtained provided A_geo is kept constant.

Molecularly Controlled Stark Effect Induces Significant Rectification in Polycyclic-Aromatic-Hydrocarbon-Terminated n-Alkanethiolates

The variation of the electronic structure of individual molecules as a function of the applied bias matters for the performance of molecular and organic electronic devices. Understanding the structure-electric-field relationship, however, remains a challenge because of the lack of in-operando spectroscopic technique and complexity arising from the ill-defined on-surface structure of molecules and organic-electrode interfaces within devices. We report that a reliable and reproducible molecular diode can be achieved by control of the conjugation length in polycyclic-aromatic-hydrocarbon (PAH)-terminated n-alkanethiolate (denoted as SC₁₁PAH), incorporated into liquid-metal-based large-area tunnel junctions in the form of a self-assembled monolayer. By taking advantage of the structural simplicity and tunability of SC₁₁PAH and the high-yielding feature of the junction technique, we demonstrate that the increase in the conjugation length of the PAH terminal group leads to a significant rectification ratio up to ∼1.7 × 10² at ±740 mV. Further study suggests that the Stark shift of the molecular energy resonance of the PAH breaks the symmetry of the energy topography across the junction and induces rectification in a temperature-independent charge-transport regime.

Influence of the donor unit on the rectification ratio in tunnel junctions based on donor-acceptor SAMs using PTM units as acceptors

Dyads formed by an electron donor unit (D) covalently linked to an electron acceptor (A) by an organic bridge are promising materials as molecular rectifiers. Very recently, we have reported the charge transport measurements across self-assembled monolayers (SAMs) of two D-A systems consisting of the ferrocene (Fc) electron-donor linked to a polychlorotriphenylmethane (PTM) electron-acceptor in its non-radical (SAM 1) and radical (SAM 2) forms. Interestingly, we observed that the non-radical SAM 1 showed rectification behavior of 2 orders of magnitude higher than its radical analogue dyad 2. In order to study the influence of the donor unit on the transport properties, we report herein the synthesis and characterization of two new D-A SAMs in which the electron-donor Fc unit is replaced by a tetrathiafulvalene (TTF) moiety linked to the PTM unit in its non-radical (SAM 3) and radical (SAM 4) forms. The observed decrease in the rectification ratio and increased current density for TTF-PTM based SAMs 3 and 4 in comparison to Fc-PTM based SAMs 1 and 2 are explained, supported by theoretical calculations, by significant changes in the electronic and supramolecular structures.

Understanding Keesom Interactions in Monolayer-Based Large-Area Tunneling Junctions

Charge transport across self-assembled monolayers (SAMs) has been widely studied. Discrepancies of charge tunneling data that arise from various studies, however, call for efforts to develop new statistical analytical approaches to understand charge tunneling across SAMs. Structure-property studies on charge tunneling across SAM-based junctions have largely been through comparison of average tunneling rates and associated variance. These early moments (especially the average) are dominated by barrier width-a static property of the junction. In this work, we show that analysis of higher statistical moments (skewness and kurtosis) reveals the dynamic nature of the tunnel junction. Intramolecular Keesom (dipole-dipole) interactions dynamically fluctuate with bias as dictated by stereoelectronic limitations. Analyzing variance in the distribution of tunneling data instead of the first statistical moment (average), for a series of n-alkanethiols containing internal amide and aromatic terminal groups, we observe that the direction of dipole moments affects molecule-electrode coupling. An applied bias induces changes in the tunneling probability, affecting the distribution of tunneling paths in large-area molecular junctions.

Ferrocenes as Building Blocks in Molecular Rectifiers and Diodes

Ferrocenes have recently been reported as components of a number of molecular circuits. This short review covers reports of ferrocenes in molecular rectifiers and diodes which have appeared in the last 10 years.

Transition from direct to inverted charge transport Marcus regions in molecular junctions via molecular orbital gating

Solid-state molecular tunnel junctions are often assumed to operate in the Landauer regime, which describes essentially activationless coherent tunnelling processes. In solution, on the other hand, charge transfer is described by Marcus theory, which accounts for thermally activated processes. In practice, however, thermally activated transport phenomena are frequently observed also in solid-state molecular junctions but remain poorly understood. Here, we show experimentally the transition from the Marcus to the inverted Marcus region in a solid-state molecular tunnel junction by means of intra-molecular orbital gating that can be tuned via the chemical structure of the molecule and applied bias. In the inverted Marcus region, charge transport is incoherent, yet virtually independent of temperature. Our experimental results fit well to a theoretical model that combines Landauer and Marcus theories and may have implications for the interpretation of temperature-dependent charge transport measurements in molecular junctions.

Stable Molecular Diodes Based on π-π Interactions of the Molecular Frontier Orbitals with Graphene Electrodes

In molecular electronics, it is important to control the strength of the molecule-electrode interaction to balance the trade-off between electronic coupling strength and broadening of the molecular frontier orbitals: too strong coupling results in severe broadening of the molecular orbitals while the molecular orbitals cannot follow the changes in the Fermi levels under applied bias when the coupling is too weak. Here, a platform based on graphene bottom electrodes to which molecules can bind via π-π interactions is reported. These interactions are strong enough to induce electronic function (rectification) while minimizing broadening of the molecular frontier orbitals. Molecular tunnel junctions are fabricated based on self-assembled monolayers (SAMs) of Fc(CH₂ )₁₁ X (Fc = ferrocenyl, X = NH₂ , Br, or H) on graphene bottom electrodes contacted to eutectic alloy of gallium and indium top electrodes. The Fc units interact more strongly with graphene than the X units resulting in SAMs with the Fc at the bottom of the SAM. The molecular diodes perform well with rectification ratios of 30-40, and they are stable against bias stressing under ambient conditions. Thus, tunnel junctions based on graphene with π-π molecule-electrode coupling are promising platforms to fabricate stable and well-performing molecular diodes.

Influence of conjugation length on ultrafast electronic tunneling in organic semiconductor thin films

Electron delocalization in conjugated organic molecules is a rate-limiting step in maximizing the photo conversion efficiency of next generation photovoltaics and molecular electronics.

Properties of Self-Assembled Monolayers Revealed via Inverse Tensiometry

Self-assembled monolayers (SAMs) have emerged as a simple platform technology and hence have been broadly studied. With advances in state-of-the-art fabrication and characterization methods, new insights into SAM structure and related properties have been delineated, albeit with some discrepancies and/or incoherencies. Some discrepancies, especially between experimental and theoretical work, are in part due to the misunderstanding of subtle structural features such as phase evolution and SAM quality. Recent work has, however, shown that simple techniques, such as the measurement of static contact angles, can be used to delineate otherwise complex properties of the SAM, especially when complemented by other more advanced techniques. In this article, we highlight the effect of nanoscale substrate asperities and molecular chain length on the SAM structure and associated properties. First, surfaces with tunable roughness are prepared on both Au and Ag, and their corresponding n-alkanethiolate SAMs are characterized through wetting and spectroscopy. From these data, chain-length- and substrate-morphology-dependent limits to the odd-even effect (structure and properties vary with the number of carbons in the molecules and the nature of the substrate), parametrization of gauche defect densities, and structural phase evolution (liquidlike, waxy, crystalline interfaces) are deduced. An evaluation of the correlation between the effect of roughness and the components of surface tension (polar-γ^p and dispersive-γ^d) reveals that wetting, at nanoscale rough surfaces, evolves proportionally with the ratio of the two components of surface tension. The evolution of conformational order is captured over a range of molecular lengths and parametrized through a dimensionless number, χ_c. By deploying a well-known tensiometry technique (herein the liquid is used to characterize the solid, hence the term inverse tensiometry) to characterize SAMs, we demonstrate that complex molecular-level phenomena in SAMs can be understood through simplicity.

Functional Molecular Junctions Derived from Double Self-Assembled Monolayers

Information processing using molecular junctions is becoming more important as devices are miniaturized to the nanoscale. Herein, we report functional molecular junctions derived from double self-assembled monolayers (SAMs) intercalated between soft graphene electrodes. Newly assembled molecular junctions are fabricated by placing a molecular SAM/(top) electrode on another molecular SAM/(bottom) electrode by using a contact-assembly technique. Double SAMs can provide tunneling conjugation across the van der Waals gap between the terminals of each monolayer and exhibit new electrical functions. Robust contact-assembled molecular junctions can act as platforms for the development of equivalent contact molecular junctions between top and bottom electrodes, which can be applied independently to different kinds of molecules to enhance either the structural complexity or the assembly properties of molecules.

Molecular diodes with rectification ratios exceeding 105 driven by electrostatic interactions

Molecular diodes operating in the tunnelling regime are intrinsically limited to a maximum rectification ratio R of ∼10³. To enhance this rectification ratio to values comparable to those of conventional diodes (R ≥ 10⁵) an alternative mechanism of rectification is therefore required. Here, we report a molecular diode with R = 6.3 × 10⁵ based on self-assembled monolayers with Fc-C≡C-Fc (Fc, ferrocenyl) termini. The number of molecules (n(V)) involved in the charge transport changes with the polarity of the applied bias. More specifically, n(V) increases at forward bias because of an attractive electrostatic force between the positively charged Fc units and the negatively charged top electrode, but remains constant at reverse bias when the Fc units are neutral and interact weakly with the positively charged electrode. We successfully model this mechanism using molecular dynamics calculations.