Photogenerated Hole-Induced Chemical-Chemical Redox Cycling Strategy on a Direct Z-Scheme Bi2S3/Bi2MoO6 Heterostructure Photoelectrode: Toward an Ultrasensitive Photoelectrochemical Immunoassay

A Z-scheme photoelectrochemical biosensing platform based on Cu2O-sensitized hollow covalent organic frameworks for sensitive microcystin-LR detection

Photoactive materials play a crucial role in enhancing the sensitivity of photoelectrochemical (PEC) biosensors. In this work, we developed a highly sensitive Z-scheme PEC biosensing platform based on Cu2O-sensitized hollow structured covalent organic frameworks (HCOF-OMe) microspheres for the detection of microcystin-LR (MC-LR). The HCOF-OMe photoelectrode with enhanced PEC response can be sensitized by Cu2O nanocubes through the formation of a Z-scheme system, enabling the construction of a signal-on PEC biosensing platform. To amplify the detection signal, a homogeneous biosensing strategy was employed by integrating a DNA walker nanomachine-assisted CRISPR/Cas12a system. A DNA walker nanomachine was assembled on streptavidin-modified magnetic bead (MB) and initially locked by MC-LR aptamer. Upon MC- LR recognition, the walker DNA was allowed to hybridize with support DNA, exposing cleavage sites for the nicking endonuclease Nb.BbvCI, which can release the activator strand to trigger the trans-cleavage ability of CRISPR/Cas12a. As a result, Cu2O nanocubes were released from the MB-ssDNA-Cu2O complex and subsequently loaded on the HCOF-OMe photoelectrode, significantly improving the PEC signals. This enabled the sensitive assay of MC-LR over a wide linear range of 1.0 × 10-5-100 μg/L with a low detection limit of 4.6 × 10-6 μg/L. The proposed biosensing platform is highly versatile and can be extended to detect other environmental pollutants or biological disease markers.

Rapid, flexible fabrication of a microfluidic electrochemical chip nucleic acid target for selective, label-free detection of influenza virus DNA using catalytic redox-recycling

H5N1 flu is a highly virulent and variable subtype of influenza with significant epidemic and pandemic potential. In this study, we introduce a novel, maskless, and rapid manufacturing process for a microfluidic chip integrated with electrodes for the quantitative detection of H5N1-DNA sequences. This detection leverages a catalytic redox-recycling signal via a novel Fe₃O₄@TMU-8 nanocomposite, which facilitates the turnover of the oxidation state of [Ru(NH₃)₆]³⁺, thereby amplifying the electrochemical signal output. The positively charged [Ru(NH₃)₆]³⁺ molecule associates with the phosphate backbone of the nucleic acids in H5N1-DNA. Changes in the aptasensor's redox-recycling signal, due to the hybridization of DNA sequences with [Ru(NH₃)₆]³⁺, were used as the electrochemical sensing response. Under optimal conditions, the signal exhibited a linear relationship with H5N1-DNA concentration, ranging from 1 fM to 1 nM, with a detection limit of 0.16 fM. This report details the fabrication of the microfluidic device using Poly(methyl methacrylate) (PMMA) sheet substrates. A laser system was employed to generate microfluidic patterns directly on the PMMA sheet. This biosensing device demonstrated long-term stability and good reproducibility, making it suitable for the quantitative assay of H5N1-DNA sequences. The results from food sample analyses further confirmed the applicability and effectiveness of the resulting biosensor.

Polarity-Switchable Dual-Mode Photoelectrochemical Cancer Marker Immunoassay Based on a Metal-Organic Framework@Nitrogen-Doped Graphdiyne Heterojunction

A photocurrent polarity-switching photoelectrochemical (PEC) assay has been used for its anti-interference ability and superior accuracy compared to a conventional PEC measuring system. In this work, an ultrasensitive photocurrent polarity-switchable assay was established for sensitive prostate-specific antigen (PSA) detection based on a novel metal-organic framework (MOF) and graphdiyne@polyaniline (GDY@PANI)-sensitized structure as a photoactive material. The nitrogen-doped carbon nanolayers wrapped around graphdiyne and a zinc-based MOF were synthesized via a hydrothermal method. As an excellent photoactive material, the type II heterostructure (MOF/GDY@PANI) not only reduced the recombination of generated electron-hole pairs but also resulted in a significant increase in photoelectric conversion efficiency. Furthermore, its photocurrent was 4.6-fold higher than that of GDY@PANI and 37-fold higher than the proposed MOF. The integrated MOF/GDY@PANI/antibody (Ab) glassy carbon photoelectrode (GCE) was used as a PEC immunosensor for PSA detection (signal-off mode) and exhibited a wide linear dynamic range from 0.1 fg/mL to 10 pg/mL and a limit of detection of 0.05 fg/mL. The GCE modified with MOF and primary antibody (Ab1) (GCE/MOF/Ab1) produced a cathodic photocurrent, and in the presence of PSA, after the introduction of GDY@PANI-labeled-secondary antibody (Ab2) onto the surface of GCE/MOF/Ab1 and formation of an immunocomplex, the photocurrent amplified and switched to an anodic current. Due to high photoelectric conversion efficiency and good polarity-switching ability of GDY@PANI, the proposed immunosensor presented a turn-on photoelectrochemical performance for PSA detection at a wide linear range from 0.1 to 10 pg/mL and ultralow detection limit of 0.03 fg/mL. Compared to signal-off mode, the sensitivity increased 2-fold and the effect of interferences produces more reliable results due to photocurrent switching, and its effectiveness was evaluated against an enzyme-linked immunosorbent assay (ELISA) using spiked real human serum samples. The positive and promising outcomes achieved by the proposed immunosensor imply that the developed platform has the potential to serve as an excellent enzyme-free photoanode immunosensor for early cancer diagnosis and therapeutic monitoring.

Machine Learning-Aided Intelligent Monitoring of Multivariate miRNA Biomarkers Using Bipolar Self-powered Sensors

Breast cancer has become the most prevalent form of cancer among women on a global scale. The early and timely diagnosis of breast cancer is of the utmost importance for improving the survival rate of patients with this disease. The occurrence of breast cancer is typically accompanied by the dysregulation of multiple microRNA (miRNA) expression profiles. Consequently, simultaneous detection of multiple miRNAs is vital for the early and accurate diagnosis of breast cancer. In this study, a bipolar self-powered sensor was developed for the simultaneous detection of miRNA-451 and miRNA-145 breast cancer biomarkers based on the specific catalytic properties of enzymes. Selenides with a microporous hollow cubic structure were designed and prepared, which can markedly enhance the enzyme load and activity, as well as detection sensitivity, due to their extensive surface area and three-dimensional porous channel. The designed bipolar self-powered sensor platform is integrated into the commercial chip, and the signal is presented in the smartphone interface, thereby enabling real-time and continuous monitoring. Furthermore, machine learning was utilized to predict miRNA detection, which encompasses numerous stages, including data collection, feature extraction, model training, and validation. In comparison to the limited sensing efficiency of self-powered biosensors driven by enzyme biofuel cells, our bipolar self-powered sensor achieved simultaneous quantitative analysis of multiple miRNA targets, thereby providing a robust tool for a more comprehensive understanding of miRNA function and its association with cancers.

3D Z-scheme conjugated polymer/Cu2O for organic photoelectrochemical transistor bioassay

Organic photoelectrochemical transistor (OPECT) is an emerging technology studying photo-electric-biological recognition events. Here, this work reports the three-dimensional (3D) Z-scheme poly (1,4-diethynylbenzene) (pDEB)@Cu2O heterojunction as a high-efficacy photogating module and its application for OPECT bioassay. Specifically, 3D Z-scheme pDEB@Cu2O heterojunction enabled fast charge transport and ion diffusion in the system, achieving remarkable amplification capability with a current gain as high as ca. 9.6 × 103. By linking with GOx-labeled sandwich immunorecognition, the impact of GOx-generated H2O2 on the OPECT made possible the sensitive bioassay. Exemplified by carcinoembryonic antigen (CEA) as the model target, the OPECT device achieved a linear detection range spanning from 100 fg/mL to 100 ng/mL and coupled with a detection limit as low as 72 fg/mL. This work provided a generic and extensible platform for the designation of novel bioassay systems.

Integrated self-powered sensors based on cubic nanostructure and cascade amplification strategies

The advantages of simple structure and easy portability inherent to self-powered biosensors have broad application prospects in clinical diagnosis and implantable medical devices. In light of the limitations of the clinical detection sensitivity, this study devised and fabricated a three-dimensional (3D) cubic structure of MoS₂ that was self-assembled by 2D nanosheets. The multi-dimensional structure design provides a broad binding site for the incubation of biological probes and the loading of biological enzymes, which can accelerate the electron transfer rate and effectively improve the detection sensitivity. On this basis, a self-powered biosensor platform was constructed for the detection of miRNA-499, employing the catalytic hairpin self-assembly (CHA) signal amplification strategy. This strategy has the potential to enhance the accuracy of detection and circumvent the occurrence of false positive results. The experimental results demonstrate that the self-powered biosensor exhibits a detection limit (LOD) of 0.12 fmol/L (S/N = 3) within a wide linear range of 1 fmol/L to 10 nmol/L. Furthermore, the sensor platform exhibits excellent specificity, stability, and reproducibility. Moreover, the test signal is transmitted via Bluetooth to the smartphone interface, thus meeting the requirements for portable, real-time detection.

Multipath collaboration-based signal amplification on Z-scheme In2O3/g-C3N4 heterojunction photoelectrode for sensitive photoelectrochemical immunoassay

The ideal photoelectrode and efficient signaling strategy are pivotal to achieve sensitive photoelectrochemical (PEC) analysis. Here, a multipath collaborative signal amplification-based PEC immunosensor was constructed for the ultrasensitive detection of cytokeratin 19 fragment 21-1. Specifically, the photoelectrode fabricated by Z-scheme In2O3/g-C3N4 heterojunction showed enhanced photocurrent intensity in response to visible light. Meanwhile, the signal probe, horseradish peroxidase functionalized dopamine-melanin nanosphere@Au nanoparticles (HRP-Dpa-melanin NS@AuNPs), were introduced into the system. When the target exists, the signal probe can induce multiple quenching of the photocurrent due to the competition of light absorption, steric hindrance and HRP-mediated biocatalytic precipitation, which effectively inhibit light, electron donor, and electron access to the photoelectrode. The fabricated immunosensor exhibits a wide linear range from 1.0 × 10-3 - 1.0 × 102 ng mL-1 with the detection limit of 0.35 pg mL-1 (S/N = 3) for cytokeratin 19 fragment 21-1 detection. The study enhances sensitivity for PEC detection by utilizing the superior Z-scheme heterojunction photoelectrode, providing a valuable method that combines multiple signal pathways for a synergistic effect in bioanalysis.

A portability self-powered sensor facilitates sensitive Cd2+ detection: Dual mechanism and three quantitative mode

As a common heavy metal contaminant, Cd2+ has adverse effects on food safety and consumer health. It is very important for human health to realize highly sensitive Cd2+ detection methods. The self-powered sensing system based on enzyme biofuel cells (EBFCs) does not need an external power supply, which can simplify the experimental equipment and has great application value in portable detection. Thus, the biosensor is innovatively integrated into the screen-printed electrode to construct a new type of portable sensor suitable for on-site and real-time Cd2+ detection. Hybridization chain reaction (HCR) combined with the Cd2+-dependent deoxyribose (DNAzyme) signal amplification strategy is used to enhance the detection sensitivity while specifically recognizing the Cd2+. Moreover, the self-powered sensor combines with smartphones to realize quantitative Cd2+ detection without other instruments and has the characteristic of Effectively improving the hazard detection technology is essential to ensure food safety. Portability, simplicity, and speed are suitable for real-time Cd2+ detection in the field. The dual mechanism and three quantitative modes combining colorimetric and two electrical signals output modes are adopted to realize the visualization and accurate detection. A series of research results confirm that this strategy is of great significance to strengthen the development of intelligent Cd2+ technology, expand the application of self-powered sensing technology, and improve the safety detection system.

Signal amplification strategies in photoelectrochemical sensing of carcinoembryonic antigen

Early detection of cancer markers is critical for cancer diagnosis and cancer therapy since these markers may indicate cancer risk, incidence, and disease prognosis. Carcinoembryonic antigen (CEA) is a type of non-specific and broad-spectrum cancer biomarker commonly utilized for early cancer diagnosis. Moreover, it serves as an essential tool to assess the efficacy of cancer treatment and monitor tumor recurrence as well as metastasis, thus garnering significant attention for precise and sensitive CEA detection. In recent years, photoelectrochemical (PEC) techniques have emerged as prominent methods in CEA detection due to the advantages of PEC, such as simple equipment requirements, cost-effectiveness, high sensitivity, low interference from background signals, and easy of instrument miniaturization. Different signal amplification methods have been reported in PEC sensors for CEA analysis. Based on these, this article reviews PEC sensors based on various signal amplification strategies for detection of CEA during the last five years. The advantages and drawbacks of these sensors were discussed, as well as future challenges.

Ternary Bi2WO6/TiO2-Pt Heterojunction Sonosensitizers for Boosting Sonodynamic Therapy

Engineering Z-scheme heterojunctions represents a promising strategy for optimizing the separation and migration of charge carriers in semiconductor sonosensitizers for enhanced reactive oxygen species (ROS) generation. Nevertheless, establishing a continuous and directional pathway for ultrasonic-induced charge flow in Z-scheme heterojunctions remains a significant challenge. In this study, we present a ternary Bi2WO6/TiO2-Pt heterojunction sonosensitizer achieved through the precise growth of Pt nanocrystals on a directionally assembled Bi2WO6/TiO2 Z-scheme structure. The construction of the Bi2WO6/TiO2-Pt heterojunction involves directional growth of Bi2WO6 in situ on the highly exposed (001) crystal facet of TiO2 nanosheets, followed by the precise deposition of nano Pt on the edge (101) crystal facet. The Z-scheme Bi2WO6/TiO2 in the ternary heterojunction ensures effective electron separation, while the Schottky TiO2-Pt interface establishes a well-defined charge flow path and robust redox capabilities. Moreover, nano Pt confers the Bi2WO6/TiO2-Pt heterojunction with excellent peroxidase-mimic and catalase-mimic activities, facilitating interactions with endogenous H2O2 to produce the hydroxyl radicals and O2. It effectively alleviates tumor hypoxia and enhances ROS production. This results in significantly higher efficiency in sonodynamically induced ROS generation compared to pure TiO2 or binary Bi2WO6/TiO2 heterojunctions, as confirmed by DFT theoretical calculation and experiments with both in vitro and in vivo anticancer performance. This study offers valuable insights for designing high-performance Z-scheme sonosensitizer systems.

Photocurrent polarity switching photoelectrochemical aptasensor for oxytetracycline based on BiOBr/Ag2S/PDA//CuO: CuO-induced II-type to dual Z-scheme system

BACKGROUND

As a broad-spectrum tetracycline antibiotic, Oxytetracycline (OTC) was widely used in a variety of applications. But, the overuse of OTC had led to the detection of it in food, water and soil, which could present significance risk to human health and cause damage to ecosystem. It was of great significance to develop sensitive detection methods for OTC. Herein, an environmentally friendly photoelectrochemical (PEC) aptasensor was constructed for the sensitive detection of OTC based on CuO-induced BiOBr/Ag2S/PDA (Polydopamine) photocurrent polarity reversal.

RESULTS

BiOBr/Ag2S/PDA composites modified electrode not only produced stable initial anodic photocurrent but also provided attachment sites for the aptamer S1 of OTC by the strong adhesion of PDA. On the other hand, CuO loaded OTC aptamer S2 (Cu-S2) was got through Cu-S bonds. After the target OTC was identified on the electrode surface, CuO was introduced to the surface of ITO/BiOBr/Ag2S/PDA through the specific binding of OTC to S2. This identification process formed dual Z-type heterojunctions and resulted in a remarkable reversal of photocurrent polarity from anodic to cathodic. Under optimization conditions, the PEC aptasensor showed a wide linear range (50 fM ∼ 100 nM), low detection limit (1.9 fM), excellent selectivity, stability and reproducibility for the detection of OTC. Moreover, it was successfully used for the analysis of OTC in real samples of tap water, milk and honey, and had the potential for practical application.

SIGNIFICANCE

This work developed an environmentally friendly photocurrent-polarity-switching PEC aptasensor with excellent selectivity, reproducibility, stability, low LOD and wide linear range for OTC detection. This sensitive system, which was including BiOBr, Ag2S, PDA and CuO were low toxicity, not only reduced the risk of traditional toxic semiconductors to operators and the environment, but can also be used for the detection of real samples, broadening the wider range of applications for BiOBr, Ag2S, PDA and CuO.

Enzymatically Mediated In Situ Generation of Z-Scheme Bi2S3/Bi2MoO6 Heterojunction-Based Organic Photoelectrochemical Transistor for METTL3/METTL14 Detection

The OPECT biosensing platform, which connects optoelectronics and biological systems, offers significant amplification and more possibilities for research in biological applications. In this work, a homogeneous organic photoelectrochemical transistor (OPECT) biosensor based on a Bi2S3/Bi2MoO6 heterojunction was constructed to detect METTL3/METTL14 protein activity. The METTL3/METTL14 complex enzyme was used to catalyze adenine (A) on an RNA strand to m6A, protecting m6A-RNA from being cleaved by an E. coli toxin (MazF). Alkaline phosphatase (ALP) catalyzed the conversion of Na3SPO3 to H2S through an enzymatic reaction. Due to the adoption of the strategy of no fixation on the electrode, the generated H2S was easy to diffuse to the surface of the ITO electrode. The Bi2S3/Bi2MoO6 heterojunction was formed in situ through a chemical replacement reaction with Bi2MoO6, improving photoelectric conversion efficiency and realizing signal amplification. Based on this "signal on" mode, METTL3/METTL14 exhibited a wide linear range (0.00001-25 ng/μL) between protein concentration and photocurrent intensity with a limit of detection (LOD) of 7.8 fg/μL under optimal experimental conditions. The applicability of the developed method was evaluated by investigating the effect of four plasticizers on the activity of the METTL3/METTL14 protein, and the molecular modeling technique was employed to investigate the interaction between plasticizers and the protein.

CuInS2/Red Phosphorus Nanosheet Interleaved Heterostructures with Improved Interfacial Charge Transfer for Photoelectrochemical Aptasensing

Accelerating the migration of interfacial carriers in heterojunctions is crucial for achieving highly sensitive photoelectrochemical (PEC) sensing. In this study, we developed three-dimensional (3D)/two-dimensional (2D) CuInS2/red phosphorus nanosheet (CuInS2/RP NS) n-n heterojunction functional materials with enhanced interfacial charge transfer capabilities for PEC sensing. The 3D CuInS2 serves as a conductive layer, providing excellent electronic conductivity and superior electron absorption and transport properties. In contrast, the ultrathin RP NS acts as a transport layer that enhances carrier mobility. The 3D/2D heterojunction ensures a large interface contact surface, shortening the carrier transport distance. A well-aligned band position generates a substantial built-in electric field, providing a significant driving force for efficient carrier separation and migration, thereby improving response sensitivity. A PEC aptamer sensor was constructed based on the synthesized heterostructure for ciprofloxacin detection. The detection limit of the CuInS2/RP NS aptamer sensor for ciprofloxacin is 2.03 × 10-15 mg·mL-1, with a linear range from 1.0 × 10-14 to 1.0 × 10-5 mg·mL-1. This work presents a strategy for enhancing the photoelectric response by modulating the interface structure of heterojunctions, thereby opening new prospects for the application of highly sensitive PEC sensors in antibiotic detection.

Overview on the Development of Electrochemical Immunosensors by the Signal Amplification of Enzyme- or Nanozyme-Based Catalysis Plus Redox Cycling

Enzyme-linked electrochemical immunosensors have attracted considerable attention for the sensitive and selective detection of various targets in clinical diagnosis, food quality control, and environmental analysis. In order to improve the performances of conventional immunoassays, significant efforts have been made to couple enzyme-linked or nanozyme-based catalysis and redox cycling for signal amplification. The current review summarizes the recent advances in the development of enzyme- or nanozyme-based electrochemical immunosensors with redox cycling for signal amplification. The special features of redox cycling reactions and their synergistic functions in signal amplification are discussed. Additionally, the current challenges and future directions of enzyme- or nanozyme-based electrochemical immunosensors with redox cycling are addressed.

In Situ Growth Reaction on Photoelectrodes of Single-Atom Fe Incorporated Bi4O5I2: A General Photoelectrochemical Immunoassay Toward Sensitive Protein Analysis

As one of the interesting signaling mechanisms, the in situ growth reaction on a photoelectrode has proven its powerful potential in photoelectrochemical (PEC) bioanalysis. However, the specific interaction between the signaling species with the photoactive materials limits the general application of the signal mechanism. Herein, on the basis of an in situ growth reaction on a photoelectrode of single-atom-based photoactive material, a general PEC immunoassay was developed in a split-type mode consisting of the immunoreaction and PEC detection procedure. Specifically, a single-atom photoactive material that incorporates Fe atoms into layered Bi4O5I2 (Bi4O5I2-Fe SAs) was used as a photoelectrode for PEC detection. The sandwich immunoreaction was performed in a well of a 96-well plate using Ag nanoparticles (Ag NPs) as signal tracers. In the PEC detection procedure, the Ag+ converted from Ag NPs were transferred onto the surface of the Bi4O5I2-Fe SAs photoelectrode and thereafter AgI was generated on the Bi4O5I2-Fe SAs in situ to form a heterojunction through the reaction of Ag+ with Bi4O5I2-Fe SAs. The formation of heterojunction greatly promoted the electro-hole separation, boosting the photocurrent response. Exemplified by myoglobin (Myo) as the analyte, the immunosensor achieved a wide linear range from 1.0 × 10-11 to 5.0 × 10-8 g mL-1 with a detection limit of 3.5 × 10-12 g mL-1. This strategy provides a general PEC immunoassay for disease-related proteins, as well as extends the application scope of in situ growth reaction in PEC analysis.

Chemical-chemical redox cycling for improving the sensitivity of the fluorescent assay: A proof-of-concept towards DNA methylation detection

Ultrasensitive analytical methods are still urgent for the discovery of trace level biomarkers and the early clinical diagnosis of disease. In this work, an ultrasensitive universal sensing platform was constructed by integrating fluorescent assay with chemical-chemical redox cycling signal amplification strategy. Using Ru@SiO2 nanoparticles wrapped by MnO2 nanosheets (Ru@SiO2@MnO2) as fluorescent probe, the chemical-chemical redox cycling system was conducted upon ascorbic acid (AA) and tris(2-carboxyethyl)phosphine (TCEP) as reductants and MnO2 nanosheets as oxidant. The MnO2 nanosheets not only could quench the fluorescence of Ru@SiO2 nanoparticles to reduce the background, but also could serve as oxidants to react with AA, generating dehydroascorbic acid (DHA). The DHA was reduced by TCEP in turn to form AA that participated in the next cycling of chemical-chemical redox reaction. Thus, the constantly released AA from the chemical-chemical redox cycling system could massively etch MnO2 nanosheets on Ru@SiO2 surface, making the fluorescence of Ru@SiO2 nanoparticles greatly recovered. It was shown that the sensitivity of the fluorescent assay was improved almost 52 times by utilizing the chemical-chemical redox cycling signal amplification strategy. This strategy was further employed to detect DNA methylation with the aid of AA-encapsulated liposomes that were modified with 5 mC antibodies to bind with the methylated DNA captured in 96-well plate. A detection of limit down to 16.2 fM was achieved for the detection of methylated DNA. It's believed that the incorporation of chemical-chemical redox cycling signal amplification strategy into fluorescent sensing paves a new way for ultrasensitive detection of biomarkers.

Fenton-like reaction triggered chemical redox-cycling signal amplification for ultrasensitive fluorometric detection of H2O2 and glucose

An ultrasensitive fluorescent biosensor is reported for glucose detection based on a Fenton-like reaction triggered chemical redox-cycling signal amplification strategy. In this amplified strategy, Cu2+ oxidizes chemically o-phenylenediamine (OPD) to generate photosensitive 2,3-diaminophenazine (DAP) and Cu+/Cu0. On the one hand, the generated Cu0 catalyzes the oxidation of OPD. On the other hand, H2O2 reacts with Cu+ to produce hydroxyl radicals (˙OH) and Cu2+ through a Cu+-mediated Fenton-like reaction. The generated ˙OH and recycled Cu2+ ions take turns oxidizing OPD to produce more photoactive DAP, triggering a self-sustaining chemical redox-cycling reaction and a remarkable fluorescent enhancement. It is worth mentioning that the cascade reaction did not stop until OPD molecules were completely consumed. Benefiting from H2O2-triggered chemical redox-cycling signal amplification, the strategy was exploited for the development of an ultrasensitive fluorescent biosensor for glucose determination. Glucose content monitoring was realized with a linear range from 1 nM to 1 μM and a limit of detection of 0.3 nM. This study validates the practicability of the chemical redox-cycling signal amplification on the fluorescent bioanalysis of glucose in human serum samples. It is expected that the method offers new opportunities to develop ultrasensitive fluorescent analysis strategy.

Cascade signal amplification strategy by coupling chemical redox-cycling and Fenton-like reaction: Toward an ultrasensitive split-type fluorescent immunoassay

An ultrasensitive split-type fluorescent immunobiosensor has been reported based on a cascade signal amplification strategy by coupling chemical redox-cycling and Fenton-like reaction. In this strategy, Cu2+ could oxidize chemically o-phenylenediamine (OPD) to generate photosensitive 2, 3-diaminophenazine (DAP) and Cu+/Cu0. On one hand, the generated Cu0 in turn catalyzed the oxidation of OPD. On the other hand, the introduced H2O2 reacted with Cu + ion to produce hydroxyl radicals (·OH) and Cu2+ ion through a Cu + -mediated Fenton-like reaction. The produced ·OH and recycled Cu2+ ion could take turns oxidizing OPD to generate more photoactive DAP, which triggering a self-sustaining chemical redox-cycling reaction and leading to a remarkable fluorescent improvement. It was worth mentioning that the cascade reaction did not stop until OPD molecules were completely consumed. Based on the H2O2-triggered cascade signal amplification, the strategy was exploited for the construction of split-type fluorescent immunoassay by taking interleukin-6 (IL-6) as the model target. It was realized for the ultrasensitive determination of IL-6 in a linear ranging from 20 fg/mL to 10 pg/mL with a limit of detection of 5 fg/mL. The study validated the practicability of the cascade signal amplification on the fluorescent bioanalysis and the superior performance in fluorescent immunoassay. It is expected that the strategy would offer new opportunities to develop ultrasensitive fluorescent methods for biosensor and bioanalysis.

A ZnIn2S4/Ag2CO3 Z-scheme heterostructure-based photoelectrochemical biosensor for neuron-specific enolase

An efficient photo-to-electrical signal is pivotal to photoelectrochemical (PEC) biosensors. In our work, a novel PEC biosensor was fabricated for the detection of neuron-specific enolase (NSE) based on a ZnIn2S4/Ag2CO3 Z-scheme heterostructure. Due to the overlapping band potentials of the ZnIn2S4 and Ag2CO3, the formed Z-scheme heterostructure can promote the charge separation and photoelectric conversion efficiency. And the concomitant Ag nanoparticles in Ag2CO3 provided multiple functions to enhance the PEC response of the Z-scheme heterostructure. It acts not only as a bridge for the transfer of carriers between ZnIn2S4 and Ag2CO3, promoting the constructed Z-scheme heterostructure, but also as electron mediators to accelerate the transfer of photogenerated carriers and improve the capture of visible light of the Z-scheme heterostructure by surface plasmon resonance (SPR). Compared with single Ag2CO3 and ZnIn2S4, the photocurrent of the designed Z-scheme heterostructure increased more than 20 and 60 times respectively. The fabricated PEC biosensor based on a ZnIn2S4/Ag2CO3 Z-scheme heterostructure exhibits sensitive detection to NSE, and presents a linear range of 50 fg·mL-1 ~ 200 ng·mL-1 with a limit of detection of 4.86 fg·mL-1. The proposed PEC biosensor provides a potential approach for clinical diagnosis.

Progress in Electrochemical Immunosensors with Alkaline Phosphatase as the Signal Label

Electrochemical immunosensors have shown great potential in clinical diagnosis, food safety, environmental protection, and other fields. The feasible and innovative combination of enzyme catalysis and other signal-amplified elements has yielded exciting progress in the development of electrochemical immunosensors. Alkaline phosphatase (ALP) is one of the most popularly used enzyme reporters in bioassays. It has been widely utilized to design electrochemical immunosensors owing to its significant advantages (e.g., high catalytic activity, high turnover number, and excellent substrate specificity). In this work, we summarized the achievements of electrochemical immunosensors with ALP as the signal reporter. We mainly focused on detection principles and signal amplification strategies and briefly discussed the challenges regarding how to further improve the performance of ALP-based immunoassays.

Direction regulation of interface carrier transfer and enhanced photocatalytic oxygen activation over Z-scheme Bi4V2O11/Ag/AgCl for water purification

Molecular oxygen activation is essential to the photocatalytic oxidation reaction, which is highly dependent on the construction of active sites and efficient charge transfer of photocatalysts. In this study, we constructed Bi₄V₂O₁₁/Ag/AgCl Z-type heterojunction photocatalysts with significantly enhanced molecular oxygen activation capacity. The systematic characterization and analysis including X-ray photoelectron spectroscopy (XPS) and density functional theory (DFT) calculations confirmed that the formation of efficient Z-type heterostructure could be attributed to the introduction of Ag nanoparticles (NPs), which regulated the electron transfer direction from Bi₄V₂O₁₁ to AgCl. Owing to the advantage of enhanced charge transfer efficiency, the O₂^- generation capacity of Bi₄V₂O11/Ag/AgCl Z-scheme heterojunction was as high as 4.6 times that of pure Bi₄V₂O₁₁. Consequently, Bi₄V₂O₁₁/Ag/AgCl showed good degradation performance against tetracycline (TC), ciprofloxacin (CIP), ranitidine hydrochloride (RAN) and 2,4-dichlorophenoxyacetic acid (2,4-D) under visible light, and their degradation rates were 8.2 times, 5.9 times, 3.8 times and 11.9 times higher than those of Bi₄V₂O₁₁, respectively. This study provides an effective and feasible strategy to design photocatalyst with improved molecular oxygen activation efficiency.

Ion-Exchange Reaction-Mediated Hierarchical Dual Z-Scheme Heterojunction for Split-Type Photoelectrochemical Immunoassays

Photoelectrochemical (PEC) immunoassays with ultrasensitive detection abilities are highly desirable for in vitro PEC diagnosis and biological detection. In this paper, dual Z-scheme PEC immunoassays with hierarchical nanostructures (TiO₂@NH₂-MIL-125@CdS) are synthesized through epitaxial growth of MOF-on-MOF and further in situ derivatization. The dual Z-scheme configuration not only extends the light absorption range but also increases the redox ability due to the interface structure nanoengineering, which synergistically suppresses bulk carrier recombination and promotes the charge transfer efficiency at the electron level. Furthermore, a smart MOF-derived labeling probe (CuO@ZnO nanocube) is designed to develop a split-type PEC biosensor by using prostate-specific antigen (PSA) as a target biomarker. In the presence of PSA, the Ab₂-labeled CuO@ZnO would specifically bond to the dual Z-scheme electrode. Then, the MOF-derived CuO@ZnO is dissolved by hydrochloric acid to release Cu²⁺, which could replace Cd²⁺ via an ion-exchange reaction, thus leading to the decrease of the photocurrent due to the destruction of the dual Z-scheme configuration. In typical applications, the split-type PEC immunoassay exhibits an excellent detection performance for PSA with a LOD as low as 0.025 pg·mL^-1.

Homogeneous photoelectrochemical biosensor for sensitive detection of omethoate via ALP-mediated pesticide assay and Bi2S3@Bi2Sn2O7 heterojunction as photoactive material

A simple homogeneous photoelectrochemical (PEC) sensing platform based on an alkaline phosphatase (ALP)-mediated pesticide assay was established for the sensitive detection of omethoate (OM). The Bi₂S₃@Bi₂Sn₂O₇ heterojunction was used as a photoactive material to provide stable background photocurrent signals. The inhibition of OM on ALP and PEC determination was carried out in the homogeneous system. In the absence of OM, dephosphorylation of L-ascorbic acid 2-phosphate trisodium salt (AAP) was catalyzed by ALP to produce the enzyme-catalyzed product (L-ascorbic acid, AA). AA, as an electron donor, could capture photogenerated holes on the Bi₂S₃@Bi₂Sn₂O₇ heterojunction, thus inhibiting the recombination of electron holes to achieve an increase of the photocurrent signal. When the OM was introduced, the enzyme activity of ALP was reduced due to the organophosphorus pesticides (OPs)-based enzyme inhibition, and the AA produced by catalytic hydrolysis was also reduced, thus reducing the photocurrent signal. Compared with the traditional PEC sensor for OPs, this homogeneous PEC sensor avoided immobilization procedures, covalent labeling, separation, and the steric hindrance effect caused by immobilized biomolecules, which achieved high recognition efficiency and caused a reduction in analysis time. Additionally, an ALP-mediated pesticide assay for the determination of OPs with a simplified experimental process further improved the stability and reproducibility of the PEC sensor. The PEC sensor showed high sensitivity to the target OM within a dynamic range of 0.05 ~ 500 ng mL^-1, and the detection limit was 0.0146 ng mL^-1. Additionally, the PEC biosensing system showed good selectivity and anti-interference ability, and exhibited a satisfactory result in spinach and mustard samples. A homogeneous PEC biosensor based on ALP inhibition strategy was constructed for OM detection in vegetable samples via Bi₂S₃@Bi₂Sn₂O₇ heterojunction as the photoactive substrate material.

Liposome-assisted chemical redox cycling strategy for advanced signal amplification: A proof-of-concept toward sensitive electrochemiluminescence immunoassay

This work presents a novel signal amplification strategy for electrochemiluminescence (ECL) biosensor based on liposome-assisted chemical redox cycling for in situ formation of Au nanoparticles (Au NPs) on TiO₂ nanotubes (TiO₂ NTs) electrode. The system was exemplified by ascorbic acid (AA)-loaded liposome, the redox cycling of AA utilizing tris (2-carboxyethyl) phosphine (TCEP) as reductant, and the use of Au nanoclusters (Au NCs)/TiO₂ NTs as working electrode to implement the ECL detection of prostate specific antigen (PSA). Specifically, the AA-loaded liposomes were used as tags to label the captured PSA through a sandwich immunoreaction. After the lysate of the liposome was transferred onto the interface of Au NCs/TiO₂ NTs in the presence of Au³⁺ and TECP, the chemical redox cycling was triggered. In the cycling, Au³⁺ was directly reduced in situ by AA to form Au NPs on Au NCs/TiO₂ NTs electrode, whereas the oxidation product of AA was reduced by TCEP to regenerate AA. The large loading capacity of the liposome and chemical redox cycling resulted in the incomplete reduction of the Au NCs to Au NPs on the TiO₂ NTs electrode, enhancing the ECL intensity greatly. The multiple signal amplification strategy achieved an ultrasensitive detection for PSA with a detection limit down to 6.7 × 10^-15 g mL^-1 and a wide linear concentration range from 1.0 × 10^-14 to 1.0 × 10^-8 g mL^-1. It is believed that this work is anticipated to extend the employment of advanced chemical redox cycling reaction in the field of ECL bioassays.

Bi-based photocatalysts for bacterial inactivation in water: Inactivation mechanisms, challenges, and strategies to improve the photocatalytic activity

Bi-based photocatalysts have been considered suitable materials for water disinfection under natural solar light due to their outstanding optical and electronic properties. However, until now, there are not extensive reviews about the development of Bi-based materials and their application in bacterial inactivation in aqueous solutions. For this reason, this work has focused on summarizing the state of the art related to the inactivation of Gram- and Gram + pathogenic bacteria under visible light irradiation using different Bi-based micro and nano structures. In this sense, the photocatalytic bacterial inactivation mechanisms are analyzed, considering several modifications. The factors that can affect the photocatalytic performance of these materials in real conditions and at a large scale (e.g., water characteristics, pH, light intensity, photocatalyst dosage, and bacteria level) have been studied. Furthermore, current alternatives for improving the photocatalytic antibacterial activity and reuse of Bi-based materials (e.g., surface engineering, crystal facet engineering, doping, noble metal coupling, heterojunctions, Z-scheme junctions, coupling with graphene derivatives, magnetic composites, immobilization) have been explored. According to several reports, inactivation rate values higher than 90% can be achieved by using the modified Bi-based micro/nano structures, which become them excellent candidates for photocatalytic water disinfection. However, these innovative photocatalytic materials bring a variety of future difficulties and opportunities in water disinfection.

In Situ Formation of Bi2MoO6-Bi2S3 Heterostructure: A Proof-Of-Concept Study for Photoelectrochemical Bioassay of l-Cysteine

A novel signal-increased photoelectrochemical (PEC) biosensor for l-cysteine (L-Cys) was proposed based on the Bi₂MoO₆–Bi₂S₃ heterostructure formed in situ on the indium–tin oxide (ITO) electrode. To fabricate the PEC biosensor, Bi₂MoO₆ nanoparticles were prepared by a hydrothermal method and coated on a bare ITO electrode. When L-Cys existed, Bi₂S₃ was formed in situ on the interface of the Bi₂MoO₆/ITO electrode by a chemical displacement reaction. Under the visible light irradiation, the Bi₂MoO₆–Bi₂S₃/ITO electrode exhibited evident enhancement in photocurrent response compared with the Bi₂MoO₆/ITO electrode, owing to the signal-increased sensing system and the excellent property of the formed Bi₂MoO₆–Bi₂S₃ heterostructure such as the widened light absorption range and efficient separation of photo-induced electron–hole pairs. Under the optimal conditions, the sensor for L-Cys detection has a linear range from 5.0 × 10⁻¹¹ to 1.0 × 10⁻⁴ mol L⁻¹ and a detection limit of 5.0 × 10⁻¹² mol L⁻¹. The recoveries ranging from 90.0% to 110.0% for determining L-Cys in human serum samples validated the applicability of the biosensor. This strategy not only provides a method for L-Cys detection but also broadens the application of the PEC bioanalysis based on in situ formation of photoactive materials.

Electroanalytical point-of-care detection of gold standard and emerging cardiac biomarkers for stratification and monitoring in intensive care medicine - a review

Determination of specific cardiac biomarkers (CBs) during the diagnosis and management of adverse cardiovascular events such as acute myocardial infarction (AMI) has become commonplace in emergency department (ED), cardiology and many other ward settings. Cardiac troponins (cTnT and cTnI) and natriuretic peptides (BNP and NT-pro-BNP) are the preferred biomarkers in clinical practice for the diagnostic workup of AMI, acute coronary syndrome (ACS) and other types of myocardial ischaemia and heart failure (HF), while the roles and possible clinical applications of several other potential biomarkers continue to be evaluated and are the subject of several comprehensive reviews. The requirement for rapid, repeated testing of a small number of CBs in ED and cardiology patients has led to the development of point-of-care (PoC) technology to circumvent the need for remote and lengthy testing procedures in the hospital pathology laboratories. Electroanalytical sensing platforms have the potential to meet these requirements. This review aims firstly to reflect on the potential benefits of rapid CB testing in critically ill patients, a very distinct cohort of patients with deranged baseline levels of CBs. We summarise their source and clinical relevance and are the first to report the required analytical ranges for such technology to be of value in this patient cohort. Secondly, we review the current electrochemical approaches, including its sub-variants such as photoelectrochemical and electrochemiluminescence, for the determination  of important CBs highlighting the various strategies used, namely the use of micro- and nanomaterials, to maximise the sensitivities and selectivities of such approaches. Finally, we consider the challenges that must be overcome to allow for the commercialisation of this technology and transition into intensive care medicine.

A signal-off photoelectrochemical aptasensor for ultrasensitive 17β-estradiol detection based on rose-like CdS@C nanostructure and enzymatic amplification

Carbon-coated cadmium sulfide rose-like nanostructures (CdS@C NRs) were prepared via a facile solvothermal approach and used as the photoelectrochemical (PEC) sensing platform for the integration of functional biomolecules. Based on this, a novel "signal-off" PEC aptasensor mediated by enzymatic amplification was proposed for the sensitive and selective detection of 17β-estradiol (E2). In the presence of E2, alkaline phosphatase-modified aptamer (ALP-apta) were released from the electrode surface through the specific recognition with E2, which caused the negative effect on PEC response due to the decrease of ascorbic acid (AA) produced by the ALP in situ enzymatic catalysis. The developed PEC aptasensor for detection of E2 exhibited a wide linear range of 1.0-250 nM, with the low detection limit of 0.37 nM. This work provides novel insight into the design of potential phoelectroactive materials and the application of signal amplification strategy in environmental analysis field.

A photoelectrochemical biosensor based on methylene blue sensitized Bi5O7I for sensitive detection of PSA

Herein, bismuth oxyiodide (Bi₅O₇I) was used as a signal probe to construct an effective sensitization structure with methylene blue (MB), combined with protein conversion strategy, and a photoelectrochemical (PEC) biosensor was constructed for sensitive detection of prostate-specific antigen (PSA). The designed biosensor had a high sensitivity and a low detection limit (LOD) of 0.047 fg mL^-1, which opened up a simple way for the detection of PSA and showed a good application prospect in clinical and medical fields.

Photoelectrochemical immunoassay of interleukin-6 based on covalent reaction-triggered photocurrent polarity switching of ZnO@fullerenol

We report here a novel photocurrent polarity switching strategy for a photoelectrochemical immunoassay driven by the covalent reaction between fullerenol (COH) and chloranilic acid (CA). The sensitive detection of interleukin-6 is achieved by using CA-encapsulated liposome as the label and COH-coated ZnO as the photoactive material, with a detection limit of 1.0 fg mL^-1.