Protein Adsorption and Coordination-Based End-Tethering of Functional Polymers on Metal-Phenolic Network Films

Modification of cellulosic adsorbent via iron-based metal phenolic networks coating for efficient removal of chromium ion

Surface modification of durian rind cellulose (DCell) was done by utilizing the strong coordination effect of polyphenol-based metal phenolic networks (MPNs). MPNs from Fe(III)-tannic acid (FTN) and Fe(III)-gallic acid (FGN) were coated on DCell via a self-assembly reaction at pH 8, resulting in adsorbent composites of FTN@DCell and FGN@DCell for removal of Cr(VI). Batch adsorption experiments revealed that FTN coating resulted in an adsorbent composite with higher adsorption capacity than FGN coating, owing to the greater number of additional adsorption sites from phenolic hydroxyl groups of tannic acid. FTN@DCell exhibits an equilibrium adsorption capacity at 30°C of 110.9 mg/g for Cr(VI), significantly higher than FGN@DCell (73.63 mg/g); the adsorption capacity was increased at higher temperature (i.e., 155.8 and 116.8 mg/g at 50°C for FTN@DCell and FGN@DCell, respectively). Effects of pH, adsorbent dose, initial concentration, and coexisting ions on Cr(VI) removal were investigated. The kinetics fractal-based model Brouers-Sotolongo indicates the 1st and 2nd order reaction for Cr(VI) adsorption on FTN@DCell and FGN@DCell, respectively. The isotherm data can be described with a fractal-based model, which implies the heterogeneous nature of the adsorbent surface sites. The Cr(VI) adsorption via surface complexation with phenolic hydroxyl groups was confirmed by evaluating the functional groups shifting. FGN@DCell and FTN@DCell were found to have good reusability, maintaining over 50 % of their adsorption efficiency after four adsorption-desorption cycles. Environmental assessment with Arabidopsis thaliana demonstrated their potential in eliminating the Cr(VI) phytotoxic effect. Thus, this study has shown the efficient and economical conversion of durian waste into environmentally benign adsorbent for heavy metal treatment.

Antioxidative and antibacterial gallium (III)-phenolic coating for enhanced osseointegration of titanium implants via pro-osteogenesis and inhibiting osteoclastogenesis

Improving the ability of implants to integrate with natural bone tissue at the initial stage of implantation remains a huge challenge because bone-to-implant interfaces are often accompanied by abnormal microenvironments with infection, reactive oxygen species (ROS) and unbalanced bone homeostasis. In this study, a multifunctional coating was fabricated on the basis of gallium (III)-phenolic networks. It is easily obtained by immersing the implants into a mixed solution of tannic acids (TAs) and gallium ions. The thickness of the coating can be precisely controlled by adjusting the number and time of immersion experiments. The resulting coating displays excellent near-infrared photothermal property. As the coating degrades, TAs and gallium ions with low concentration are released from the coating, which is more rapid in acidic and oxidative stress microenvironments. Photothermal performance as well as released TAs and gallium ions give the coating outstanding broad-spectrum antibacterial ability. Furthermore, the coating effectively reduces intracellular ROS of osteoblasts. In vitro and in vivo experiments demonstrate the capability of the coating enhancing implants' osseointegration via pro-osteogenesis and inhibiting osteoclastogenesis. The findings imply that gallium (III)-phenolic coating holds great promise to promote implant osseointegration by rescuing abnormal microenvironments of infection, oxidative stress and unbalanced bone homeostasis.

Avoiding implant-related complications in medically compromised patients with or without unhealthy lifestyle/Elevated oxidative stress

Increased human life expectancy broadens the alternatives for missing teeth and played a role in the widespread use of dental implants and related augmentation procedures for the aging population. Though, many of these patients may have one or more diseases. These systemic conditions may directly lead to surgical complications, compromise implant/bone healing, or influence long-term peri-implant health and its response to biologic nuisances. Offering patients credible expectations regarding intra- and postoperative complications and therapeutic prognosis is an ethical and legal obligation. Clear identification of potential types of adverse effects, complications, or errors is important for decision-making processes as they may be related to different local, systemic, and technical aspects. Therefore, the present review structures the underlying biological mechanisms, clinical evidence, and clinical recommendations for the most common systemic risk factors for implant-related complications.

Plant-Derived Polyphenol and LL-37 Peptide-Modified Nanofibrous Scaffolds for Promotion of Antibacterial Activity, Anti-Inflammation, and Type-H Vascularized Bone Regeneration

The regeneration of oral tissues is a challenging clinical problem because of the complex microbial and biological stress environments. Electrospun fibrous scaffolds have attracted significant interest as effective barrier membranes for guided bone regeneration (GBR); however, no mature strategy yet exists for the surface modification of fibers to provide versatility to satisfy clinical requirements. This study demonstrated a practical biosafety strategy: the combined use of plant polyphenols and LL-37 peptides to modify the fiber surface to endow the fibrous scaffold with antimicrobial activity, immunoregulation, and vascularized bone regeneration. We confirmed that the LL-37 peptides interacted with tannic acid (TA) through noncovalent bonds through experiments and molecular docking simulation analysis. In vitro experiments showed that the TA coating imparted strong antibacterial properties to the fibrous scaffold, but it also caused cytotoxicity. The grafting of LL-37 peptide promoted the spreading, migration, and osteogenic differentiation of mesenchymal stem cells and was also conducive to the M2 polarization of RAW264.7 cells. In vivo experiments further verified that the LL-37 peptide-grafted fibrous scaffold significantly enhanced angiogenesis, anti-inflammatory effects, and type-H vascularized bone regeneration. Overall, the fibrous scaffold modified by the LL-37 peptide through TA grafting has significant potential for GBR applications.

Phenolic-Compound-Based Functional Coatings: Versatile Surface Chemistry and Biomedical Applications

Phenolic-compound-based functional coatings that allow for flexible modulation of chemical and surface properties have found widespread uses in a diverse range of biomedical applications from antibiofouling and antioxidation to bioimaging, therapeutics, and controlled drug delivery. It is imperative to understand the formation mechanism of phenolic coatings to fully meet the needs of their emerging applications in controlling the surface properties of biomaterials and medical devices. In this Perspective, we highlight the versatile chemical and self-assembly approaches to generate phenolic coatings with tailored surface properties and reactivities and also discuss how the surface properties and chemical reactivities impart functional materials for translational research.

Applications of Antioxidants in Dental Procedures

As people are paying more and more attention to dental health, various dental treatment procedures have emerged, such as tooth bleaching, dental implants, and dental restorations. However, a large number of free radicals are typically produced during the dental procedures. When the imbalance in distribution of reactive oxygen species (ROS) is induced, oxidative stress coupled with oxidative damage occurs. Oral inflammations such as those in periodontitis and pulpitis are also unavoidable. Therefore, the applications of exogenous antioxidants in oral environment have been proposed. In this article, the origin of ROS during dental procedures, the types of antioxidants, and their working mechanisms are reviewed. Additionally, antioxidants delivery in the complicated dental procedures and their feasibility for clinical applications are also covered. Finally, the importance of safety assessment of these materials and future work to take the challenge in antioxidants development are proposed for perspective.

Can polyphenolic surface modifications prevent fungal colonization of titanium dental implants?

Oral biofilms can be a major health problem causing infections and chronic inflammation of mucosal tissue. While much effort is put in the investigation of bacteria in biofilms, the role of fungi is often neglected, despite Candida albicans playing a key role in the formation of multispecies oral biofilms. With the rise of antibiotic resistance, new strategies to reduce microbial growth need to be found. Therefore, plant derived polyphenolic molecules have been suggested to reduce both adhesion and growth of pathogenic bacteria and fungi. In this study, we investigated the use of polyphenolic coatings to reduce adhesion and biofilm formation of C. albicans BWP17 on titanium implants. Tannic acid and pyrogallol coatings altered the hydrophobic and charge properties of titanium surfaces, and both compounds were gradually released as active molecules over time. Despite such effects, we found no significant inhibition on growth and biofilm formation of C. Albicans, indicating that the release of active molecules from the coatings did not reach relevant inhibitory concentrations. However, a potential antibiofilm effect was observed by the pH-dependent disassembly of the polyphenolic layer, which caused the biofilm to detach. Hence, further efforts are required to create tailored implant surfaces, which sustainably reduce microbial growth and adhesion.

Surface Coating with Naphthalene Trisulfonate/Hafnium(IV) Complexes: Versatility and Post-Functionalization

Naphthalene trisulfonate is found to have versatile surface coating capability when combined with hafnium(IV) ions, thereby forming complexes. Solid substrates such as titanium/titanium dioxide, glass, and nylon immersed in a solution of naphthalene trisulfonate and Hf^IV produces naphthalene trisulfonate/Hf^IV complex coating. The coating is not produced when the Hf^IV ions are absent or when naphthalene monosulfonate replaces naphthalene trisulfonate; this indicates the significance of Hf^IV ions and multiple sulfonates in this coating system. The versatile surface coating property of naphthalene trisulfonate/Hf^IV complexes is attributed to the coexistence of hydrophobic aromatic and hydrophilic side groups in naphthalene trisulfonate. Additionally, Hf^IV ion-mediated cross-linking reactions between naphthalene trisulfonate molecules induce molecular assembly, facilitating versatile surface coating. Post-functionalization of the coating is accomplished through additional Hf^IV-mediated coordinate bond formation; alginate and λ-carrageenan are successfully grafted onto the coating for nonbiofouling applications.

Polymer-drug conjugates: Design principles, emerging synthetic strategies and clinical overview

Adagen, an enzyme replacement treatment for adenosine deaminase deficiency, was the first protein-polymer conjugate to be approved in early 1990s. Post this regulatory approval, numerous polymeric drugs and polymeric nanoparticles have entered the market as advanced or next-generation polymer-based therapeutics, while many others have currently been tested clinically. The polymer conjugation to therapeutic moiety offers several advantages, like enhanced solubilization of drug, controlled release, reduced immunogenicity, and prolonged circulation. The present review intends to highlight considerations in the design of therapeutically effective polymer-drug conjugates (PDCs), including the choice of linker chemistry. The potential synthetic strategies to formulate PDCs have been discussed along with recent advancements in the different types of PDCs, i.e., polymer-small molecular weight drug conjugates, polymer-protein conjugates, and stimuli-responsive PDCs, which are under clinical/preclinical investigation. Current impediments and regulatory hurdles hindering the clinical translation of PDC into effective therapeutic regimens for the amelioration of disease conditions have been addressed.

Effect of N-Methylation on Dopamine Surface Chemistry

Dopamine (DA) surface chemistry has received significant attention because of its applicability in a wide range of research fields and the ability to graft functional molecules onto numerous solid surfaces. Various DA derivatives have been newly synthesized to identify key factors affecting the coating efficiency and to advance the coating system development. The oxidation of catechol into quinone followed by internal cyclization via the nucleophilic attack of primary amine is crucial for DA-based surface coating. Thus, it is expected that the amine group's nucleophilicity control directly affects the coating efficiency. However, it has not been systematically investigated, and most studies have been conducted with the focus on the transformation of amines into amides, despite such approaches decreasing the coating efficiency; the nitrogen in amides is less nucleophilic than that in free amines. In this study, we investigated the effect of N-alkylation on dopamine surface chemistry. N,N-Dimethyldopamine (DMDA) was newly synthesized, and the coating efficiency was systematically compared with DA and N-methyldopamine (MDA). DA N-monomethylation improved the coating rate by increasing the nitrogen nucleophilicity, whereas N,N-dimethylation dramatically decreased the DA surface coating property. In addition, MDA remained capable of universal surface coating and secondary reactions using the surface catechols. This study provides opportunities for developing coating materials with advanced functions and an improved coating rate.

Characterization of the foreign body response of titanium implants modified with polyphenolic coatings

The foreign body response is dictating the outcome of wound healing around any implanted materials. Patients who suffer from chronic inflammatory diseases and impaired wound healing often face a higher risk for implant failure. Therefore, functional surfaces need to be developed to improve tissue integration. For this purpose, we evaluated the impact of surface coatings made of antioxidant polyphenolic molecules tannic acid (TA) and pyrogallol (PG) on the host response in human blood. Our results showed that although the polyphenolic surface modifications impact the initial blood protein adsorption compared to Ti, the complement and coagulation systems are triggered. Despite complement activation, monocytes and granulocytes remained inactivated, which was manifested in a low pro-inflammatory cytokine expression. Under oxidative stress, both coatings were able to reduce intracellular reactive oxygen species in human gingival fibroblasts (hGFs). However, no anti-inflammatory effects of polyphenolic coatings could be verified in hGFs stimulated with lipopolysaccharide and IL-1β. Although polyphenols reportedly inhibit the NF-κB signaling pathway, phosphorylation of NF-κB p65 was observed. In conclusion, our results indicated that TA and PG coatings improved the hemocompatibility of titanium surfaces and have the potential to reduce oxidative stress during wound healing.

Rapid assembly of colorless antimicrobial and anti-odor coatings from polyphenols and silver

The development of antimicrobial fabrics and textiles that can sustainably inhibit a broad spectrum of microbes is crucial for protecting against pathogens in various environments. However, engineering antimicrobial textiles is challenging due to issues with discoloration and inhibited breathability, the use of harmful or harsh reagents and synthesis conditions, and complex and/or time-consuming processing. Herein, we develop a facile and rapid approach to deposit antimicrobial coatings using universally adherent plant polyphenols and antimicrobial silver ions. Importantly, the coatings are colorless, thin (< 10 nm), rapidly assembled (< 20 min), and can be deposited via immersion or spraying. We demonstrate that these metal-phenolic coatings on textiles can inhibit lipid-enveloped viruses over one thousand times more efficiently than coatings composed of other metal ions, while maintaining their efficacy even after 5 washes. Moreover, the coatings also inhibit Gram positive and negative bacteria, and fungi, and can prevent odors on clothes for at least 10 washes. Collectively, the ease of synthesis, use of simple and safe precursors, and amenability to at-home and industrial application suggests that the coatings will find practical application in various settings.

Coordination-Driven Surface Zwitteration for Antibacterial and Antifog Applications

The enhancement of surface wettability by hydrophilic polymer coatings has been of great interest because it has been used to address several technical challenges such as biofouling and surface fogging. Among the hydrophilic polymers, zwitterionic polymers have been extensively utilized to coat solid surfaces due to their excellent capability to bind water molecules, thereby forming dense hydration layers on the solid surfaces. For these zwitterionic polymers to function appropriately on the solid surfaces, techniques for fixing polymers onto the solid surface with high efficiency are required. Herein, we report a new approach to graft zwitterionic polymers onto solid substrates. The approach is based on the mussel-inspired surface chemistry and metal coordination. It consists of polydopamine coating and the coordination-driven grafting of the zwitterionic polymers. Polydopamine coating enables the versatile surface immobilization of catechols. Zwitterionic polymers are then easily fixed onto the catechol-immobilized surface by metal-mediated crosslinking reactions. Using this approach, nanometer-thick zwitterionic polymer layers that are highly resistant to bacterial adhesion and fog generation could be successfully fabricated on solid substrates in a substrate-independent manner.

Recent progress in Tannic Acid-driven antimicrobial/antifouling surface coating strategies

Medical devices and surgical implants are a necessary part of tissue engineering and regenerative medicines. However, the biofouling and microbial colonization on the implant surface continues to be a major...

Deconstruction and Reassembly of Renewable Polymers and Biocolloids into Next Generation Structured Materials

This review considers the most recent developments in supramolecular and supraparticle structures obtained from natural, renewable biopolymers as well as their disassembly and reassembly into engineered materials. We introduce the main interactions that control bottom-up synthesis and top-down design at different length scales, highlighting the promise of natural biopolymers and associated building blocks. The latter have become main actors in the recent surge of the scientific and patent literature related to the subject. Such developments make prominent use of multicomponent and hierarchical polymeric assemblies and structures that contain polysaccharides (cellulose, chitin, and others), polyphenols (lignins, tannins), and proteins (soy, whey, silk, and other proteins). We offer a comprehensive discussion about the interactions that exist in their native architectures (including multicomponent and composite forms), the chemical modification of polysaccharides and their deconstruction into high axial aspect nanofibers and nanorods. We reflect on the availability and suitability of the latter types of building blocks to enable superstructures and colloidal associations. As far as processing, we describe the most relevant transitions, from the solution to the gel state and the routes that can be used to arrive to consolidated materials with prescribed properties. We highlight the implementation of supramolecular and superstructures in different technological fields that exploit the synergies exhibited by renewable polymers and biocolloids integrated in structured materials.

One-step synthesis of nitrogen-grafted copper-gallic acid for enhanced methylene blue removal

Nitrogen-grafting through the addition of glycine (Gly) was performed on a metal- phenolic network (MPN) of copper (Cu²⁺) and gallic acid (GA) to increase its adsorption capacity. Herein, we reported a one-step synthesis method of MPN, which was developed according to the metal–ligand complexation principle. The nitrogen grafted CuGA (N_g-CuGA) MPN was obtained by reacting Cu²⁺, GA, and Gly in an aqueous solution at a molar ratio of 1:1:1 and a pH of 8. Several physicochemical measurements, such as Fourier transform infrared (FTIR) spectroscopy, scanning electron microscopy (SEM), N₂ sorption, X-ray diffraction (XRD), and thermal gravimetry analysis (TGA), were done on N_g-CuGA to elucidate its characteristics. The analysis revealed that the N_g-CuGA has non-uniform spherical shaped morphology with a pore volume of 0.56 cc/g, a pore size of 23.25 nm, and thermal stability up to 205 °C. The applicational potential of the N_g-CuGA was determined based on its adsorption capacity against methylene blue (MB). The N_g-CuGA was able to adsorb 190.81 mg MB per g adsorbent at a pH of 6 and temperature of 30 °C, which is 1.53 times higher than the non-grafted CuGA. Detailed assessment of N_g-CuGA adsorption properties revealed their pH- and temperature-dependent nature. The adsorption capacity and affinity were found to decrease at a higher temperature, demonstrating the exothermic adsorption behavior.

Polyphenol-Containing Nanoparticles: Synthesis, Properties, and Therapeutic Delivery

Polyphenols, the phenolic hydroxyl group-containing organic molecules, are widely found in natural plants and have shown beneficial effects on human health. Recently, polyphenol-containing nanoparticles have attracted extensive research attention due to their antioxidation property, anticancer activity, and universal adherent affinity, and thus have shown great promise in the preparation, stabilization, and modification of multifunctional nanoassemblies for bioimaging, therapeutic delivery, and other biomedical applications. Additionally, the metal-polyphenol networks, formed by the coordination interactions between polyphenols and metal ions, have been used to prepare an important class of polyphenol-containing nanoparticles for surface modification, bioimaging, drug delivery, and disease treatments. By focusing on the interactions between polyphenols and different materials (e.g., metal ions, inorganic materials, polymers, proteins, and nucleic acids), a comprehensive review on the synthesis and properties of the polyphenol-containing nanoparticles is provided. Moreover, the remarkable versatility of polyphenol-containing nanoparticles in different biomedical applications, including biodetection, multimodal bioimaging, protein and gene delivery, bone repair, antibiosis, and cancer theranostics is also demonstrated. Finally, the challenges faced by future research regarding the polyphenol-containing nanoparticles are discussed.

The role of poly(2-alkyl-2-oxazoline)s in hydrogels and biofabrication

Poly(2-alkyl-2-oxazoline)s (PAOXAs) have been rapidly emerging as starting materials in the design of tissue engineering supports and for the generation of platforms for cell cultures, especially in the form of hydrogels. Thanks to their biocompatibility, chemical versatility and robustness, PAOXAs now represent a valid alternative to poly(ethylene glycol)s (PEGs) and their derivatives in these applications, and in the formulation of bioinks for three-dimensional (3D) bioprinting. In this review, we summarize the recent literature where PAOXAs have been used as main components for hydrogels and biofabrication mixtures, especially highlighting how their easily tunable composition could be exploited to fabricate multifunctional biomaterials with an extremely broad spectrum of properties.

Phenolic-enabled nanotechnology: versatile particle engineering for biomedicine

Phenolics are ubiquitous in nature and have gained immense research attention because of their unique physiochemical properties and widespread industrial use. In recent decades, their accessibility, versatile reactivity, and relative biocompatibility have catalysed research in phenolic-enabled nanotechnology (PEN) particularly for biomedical applications which have been a major benefactor of this emergence, as largely demonstrated by polydopamine and polyphenols. Therefore, it is imperative to overveiw the fundamental mechanisms and synthetic strategies of PEN for state-of-the-art biomedical applications and provide a timely and comprehensive summary. In this review, we will focus on the principles and strategies involved in PEN and summarize the use of the PEN synthetic toolkit for particle engineering and the bottom-up synthesis of nanohybrid materials. Specifically, we will discuss the attractive forces between phenolics and complementary structural motifs in confined particle systems to synthesize high-quality products with controllable size, shape, composition, as well as surface chemistry and function. Additionally, phenolic's numerous applications in biosensing, bioimaging, and disease treatment will be highlighted. This review aims to provide guidelines for new scientists in the field and serve as an up-to-date compilation of what has been achieved in this area, while offering expert perspectives on PEN's use in translational research.

Metal-phenolic networks for cancer theranostics

Metal-phenolic networks (MPNs) have shown promising potential in biomedical applications since they provide a rapid, simple and robust way to construct multifunctional nanoplatforms. As a novel nanomaterial self-assembled from metal ions and polyphenols, MPNs can be prepared to assist the theranostics of cancer owing to their bio-adhesiveness, good biocompatibility, versatile drug loading, and stimuli-responsive profile. This Critical Review aims to summarize recent progress in MPN-based nanoplatforms for multimodal tumor therapy and imaging. First, the advantages of MPNs as drug carriers are summarized. Then, various tumor therapeutic modalities based on MPNs are introduced. Next, MPN-based theranostic systems are reviewed. In terms of in vivo applications, specific attention is paid to their biosafety, biodistribution, as well as excretion. Finally, some problems and limitations of MPNs are discussed, along with a future perspective on the field.

VTE risk assessment in pregnancy

A State of the Art lecture, "VTE Risk Assessment in Pregnancy," was presented at the ISTH congress in Melbourne, Australia, in 2019. Venous thromboembolism (VTE) remains a leading cause of death in pregnancy and in the postpartum period. Moreover, VTE can result in lifelong disability. The elevated baseline pregnancy-associated VTE risk is further increased by additional maternal, pregnancy, and delivery characteristics, highlighting the importance of VTE risk assessment in early pregnancy, at delivery, and if risk factors change. This review will provide an overview of the impact and epidemiology of VTE in pregnancy (including reported risk factors for pregnancy-associated VTE), will address VTE risk-reduction strategies (including ongoing studies), and will provide a summary of critical knowledge gaps. Finally, throughout this review, relevant new data presented during the 2019 ISTH annual congress in Melbourne will be summarized.

Bio-inspired immobilization of low-fouling phospholipid polymers via a simple dipping process: a comparative study of phenol, catechol and gallol as tethering groups

Low-fouling phospholipid polymer was conjugated with bio-inspired tethering groups. Immobilization efficiencies of these polymers onto various surfaces were investigated.

Thickness-Tunable Eggshell Membrane Hydrolysate Nanocoating with Enhanced Cytocompatibility and Neurite Outgrowth

The eggshell membrane is one of the easily obtainable natural biomaterials, but has been neglected in the biomaterial community, compared with marine biomaterials and discarded as a food waste. In this work, we utilized the ESM hydrolysate (ESMH), which was obtained by the enzymochemical method, as a bioactive functional material for interfacial bioengineering, exemplified by thickness-tunable, layer-by-layer (LbL) nanocoating with the Fe(III)-tannic acid (TA) complex. [Fe(III)-TA/ESMH] LbL films, ending with the ESMH layer, showed great cytocompatiblility with HeLa cells and even primary hippocampal neuron cells. More importantly, the films were found to be neurochemically active, inducing the acceleration of neurite outgrowth for the long-term neuron culture. We believe that the ability for building cytocompatible ESMH films in a thickness-tunable manner would be applicable to a broad range of different nanomaterials in shape and size and would be utilized with multimodal functionalities for biomedical applications, such as bioencapsulation, theranostics, and regenerative medicine.