1
|
Rogalski A, Wang F, Wang J, Martyniuk P, Hu W. The Perovskite Optoelectronic Devices - A Look at the Future. SMALL METHODS 2024:e2400709. [PMID: 39235586 DOI: 10.1002/smtd.202400709] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/14/2024] [Revised: 08/20/2024] [Indexed: 09/06/2024]
Abstract
The perovskite materials are broadly incorporated into optoelectronic devices due to a number of advantages. Their rapid technological progress is related to the relatively simple fabrication process, low production cost and high efficiency. Significant improvement is made in the light emitting, detection performance and device design especially operating in the visible and near-infrared regions. This review presents the status and possible future development of the perovskite devices such as solar cells, photodetectors, and light-emitting diodes. The fundamental properties of perovskite materials related to their effective device applications are summarized. Since the development of the perovskite technology is mainly driven by the revolutionary evolution of the semiconductor perovskite solar cell as a robust candidate for next-generation solar energy harvesting, this topic is considered first. The device engineering of various perovskite photodetector structures, including perovskite quantum dot photodetectors, is then discussed in detail. Their performance is compared with the current commercial photodetectors available on the global market together with their challenges. Finally, the considerable progress in the fabrication of the perovskite light-emitting diodes with external quantum efficiency exceeding 20% is presented. The paper is completed in an attempt to determine the development of perovskite optoelectronic devices in the future.
Collapse
Affiliation(s)
- Antoni Rogalski
- Institute of Applied Physics, Military University of Technology, 2 Kaliskiego St., Warsaw, 00-908, Poland
| | - Fang Wang
- State Key Laboratory of Infrared Physics, Shanghai Institute of Technical Physics, Chinese Academy of Sciences, 500 Yu Tian Road, Shanghai, 200083, China
| | - Jin Wang
- State Key Laboratory of Infrared Physics, Shanghai Institute of Technical Physics, Chinese Academy of Sciences, 500 Yu Tian Road, Shanghai, 200083, China
| | - Piotr Martyniuk
- Institute of Applied Physics, Military University of Technology, 2 Kaliskiego St., Warsaw, 00-908, Poland
| | - Weida Hu
- State Key Laboratory of Infrared Physics, Shanghai Institute of Technical Physics, Chinese Academy of Sciences, 500 Yu Tian Road, Shanghai, 200083, China
| |
Collapse
|
2
|
Chen J, Yang S, Jiang L, Fan K, Liu Z, Liu W, Li W, Huang H, Zhang H, Yao K. Surface Molecular Engineering for Fully Textured Perovskite/Silicon Tandem Solar Cells. Angew Chem Int Ed Engl 2024; 63:e202407151. [PMID: 38860918 DOI: 10.1002/anie.202407151] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/15/2024] [Revised: 05/27/2024] [Accepted: 06/10/2024] [Indexed: 06/12/2024]
Abstract
Developing large-scale monolithic perovskite/silicon tandem devices based on industrial Czochralski silicon wafers will likely have to adopt double-side textured architecture, given their optical benefits and low manufacturing costs. However, the surface engineering strategies that are widely used in solution-processed perovskites to regulate the interface properties are not directly applicable to micrometric textures. Here, we devise a surface passivation strategy by dynamic spray coating (DSC) fluorinated thiophenethylammonium ligands, combining the advantages of providing conformal coverage and suppressing phase conversion on textured surfaces. From the viewpoint of molecular engineering, theoretical calculation and experimental results demonstrate that introducing trifluoromethyl group provide more effective surface passivation through strong interaction and energy alignment by forming a dipole layer. Consequently, the DSC treatment of this bifunctional molecule enables the tandem cells based on industrial silicon wafers to achieve a certified stabilized power conversion efficiency of 30.89 %. In addition, encapsulated devices display excellent operational stability by retaining over 97 % of their initial performance after 600 h continuous illumination.
Collapse
Affiliation(s)
- Jun Chen
- Institute of Photovoltaics, School of Physics and Materials Science, Nanchang University, Nanchang, 330031, China
| | - Shaofei Yang
- Suzhou Maxwell Technologies Co., Ltd., Suzhou, 215200, China
| | - Long Jiang
- State Key Laboratory of Oil and Gas Equipment, CNPC Tubular Goods Research Institute, Xi'an, Shaanxi, 710077, China
| | - Ke Fan
- Department of Applied Physics, The Hong Kong Polytechnic University, Hung Hom, Kowloon, Hong Kong, 999077, China
| | - Zhiliang Liu
- Institute of Photovoltaics, School of Physics and Materials Science, Nanchang University, Nanchang, 330031, China
| | - Wentao Liu
- Institute of Photovoltaics, School of Physics and Materials Science, Nanchang University, Nanchang, 330031, China
| | - Wei Li
- State Key Laboratory of Advanced Technology for Materials Synthesis and Processing, Wuhan University of Technology, Wuhan, 430070, China
| | - Haitao Huang
- Department of Applied Physics, The Hong Kong Polytechnic University, Hung Hom, Kowloon, Hong Kong, 999077, China
| | - Hong Zhang
- State Key Laboratory of Photovoltaic Science and Technology, Institute of Optoelectronics, Fudan University, Shanghai, 200433, China
| | - Kai Yao
- Institute of Photovoltaics, School of Physics and Materials Science, Nanchang University, Nanchang, 330031, China
| |
Collapse
|
3
|
Chen P, Xiao Y, Li S, Jia X, Luo D, Zhang W, Snaith HJ, Gong Q, Zhu R. The Promise and Challenges of Inverted Perovskite Solar Cells. Chem Rev 2024. [PMID: 39207782 DOI: 10.1021/acs.chemrev.4c00073] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 09/04/2024]
Abstract
Recently, there has been an extensive focus on inverted perovskite solar cells (PSCs) with a p-i-n architecture due to their attractive advantages, such as exceptional stability, high efficiency, low cost, low-temperature processing, and compatibility with tandem architectures, leading to a surge in their development. Single-junction and perovskite-silicon tandem solar cells (TSCs) with an inverted architecture have achieved certified PCEs of 26.15% and 33.9% respectively, showing great promise for commercial applications. To expedite real-world applications, it is crucial to investigate the key challenges for further performance enhancement. We first introduce representative methods, such as composition engineering, additive engineering, solvent engineering, processing engineering, innovation of charge transporting layers, and interface engineering, for fabricating high-efficiency and stable inverted PSCs. We then delve into the reasons behind the excellent stability of inverted PSCs. Subsequently, we review recent advances in TSCs with inverted PSCs, including perovskite-Si TSCs, all-perovskite TSCs, and perovskite-organic TSCs. To achieve final commercial deployment, we present efforts related to scaling up, harvesting indoor light, economic assessment, and reducing environmental impacts. Lastly, we discuss the potential and challenges of inverted PSCs in the future.
Collapse
Affiliation(s)
- Peng Chen
- State Key Laboratory for Artificial Microstructure and Mesoscopic Physics, School of Physics, Frontiers Science Center for Nano-optoelectronics & Collaborative Innovation Center of Quantum Matter, Peking University, Beijing 100871, China
| | - Yun Xiao
- State Key Laboratory for Artificial Microstructure and Mesoscopic Physics, School of Physics, Frontiers Science Center for Nano-optoelectronics & Collaborative Innovation Center of Quantum Matter, Peking University, Beijing 100871, China
- Clarendon Laboratory, Department of Physics, University of Oxford, Oxford OX1 3PU, U.K
| | - Shunde Li
- State Key Laboratory for Artificial Microstructure and Mesoscopic Physics, School of Physics, Frontiers Science Center for Nano-optoelectronics & Collaborative Innovation Center of Quantum Matter, Peking University, Beijing 100871, China
| | - Xiaohan Jia
- State Key Laboratory for Artificial Microstructure and Mesoscopic Physics, School of Physics, Frontiers Science Center for Nano-optoelectronics & Collaborative Innovation Center of Quantum Matter, Peking University, Beijing 100871, China
| | - Deying Luo
- International Research Institute for Multidisciplinary Science, Beihang University, Beijing 100191, China
| | - Wei Zhang
- Advanced Technology Institute, Department of Electrical and Electronic Engineering, University of Surrey, Guildford, Surrey GU2 7XH, U.K
- State Centre for International Cooperation on Designer Low-carbon & Environmental Materials (CDLCEM), School of Materials Science and Engineering, Zhengzhou University, Zhengzhou 450001, China
| | - Henry J Snaith
- Clarendon Laboratory, Department of Physics, University of Oxford, Oxford OX1 3PU, U.K
| | - Qihuang Gong
- State Key Laboratory for Artificial Microstructure and Mesoscopic Physics, School of Physics, Frontiers Science Center for Nano-optoelectronics & Collaborative Innovation Center of Quantum Matter, Peking University, Beijing 100871, China
- Peking University Yangtze Delta Institute of Optoelectronics, Nantong, Jiangsu 226010, China
- Collaborative Innovation Center of Extreme Optics, Shanxi University, Taiyuan, Shanxi 030006, China
| | - Rui Zhu
- State Key Laboratory for Artificial Microstructure and Mesoscopic Physics, School of Physics, Frontiers Science Center for Nano-optoelectronics & Collaborative Innovation Center of Quantum Matter, Peking University, Beijing 100871, China
- Peking University Yangtze Delta Institute of Optoelectronics, Nantong, Jiangsu 226010, China
- Collaborative Innovation Center of Extreme Optics, Shanxi University, Taiyuan, Shanxi 030006, China
| |
Collapse
|
4
|
Wang X, Xie Z, Wang R, Xiao Y, Yan K, Zhao Y, Lin R, Redshaw C, Min Y, Ouyang X, Feng X. In Situ Photogenerated Radicals of Hydroxyl Substituted Pyrene-Based Triphenylamines with Enhanced Transport and Free Doping/Post-Oxidation for Efficient Perovskite Solar Cells. SMALL (WEINHEIM AN DER BERGSTRASSE, GERMANY) 2024; 20:e2311914. [PMID: 38566542 DOI: 10.1002/smll.202311914] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/27/2023] [Revised: 03/12/2024] [Indexed: 04/04/2024]
Abstract
The high-performance hole transporting material (HTM) is one of the most important components for the perovskite solar cells (PSCs) in promoting power conversion efficiency (PCE). However, the low conductivity of HTMs and their additional requirements for doping and post-oxidation greatly limits the device performance. In this work, three novel pyrene-based derivatives containing methoxy-substituted triphenylamines units (PyTPA, PyTPA-OH and PyTPA-2OH) are designed and synthesized, where different numbers of hydroxyl groups are connected at the 2- or 2,7-positions of the pyrene core. These hydroxyl groups at the 2- or 2,7-positions of pyrene play a significantly role to enhance the intermolecular interactions that are able to generate in situ radicals with the assistance of visible light irradiation, resulting in enhanced hole transferring ability, as well as an enhanced conductivity and suppressed recombination. These pyrene-core based HTMs exhibit excellent performance in PSCs, which possess a higher PCE than those control devices using the traditional spiro-OMeTAD as the HTM. The best performance can be found in the devices with PyTPA-2OH. It has an average PCE of 23.44% (PCEmax = 23.50%), which is the highest PCE among the reported PSCs with the pyrene-core based HTMs up to date. This research offers a novel avenue to design a dopant-free HTM by the combination of the pyrene core, methoxy triphenylamines, and hydroxy groups.
Collapse
Affiliation(s)
- Xiaohui Wang
- Guangdong Provincial Key Laboratory of Functional Soft Condensed Matter, School of Material and Energy, Guangdong University of Technology, Guangzhou, 510006, P. R. China
| | - Zhixin Xie
- Guangdong Provincial Key Laboratory of Functional Soft Condensed Matter, School of Material and Energy, Guangdong University of Technology, Guangzhou, 510006, P. R. China
| | - Rongxin Wang
- Fujian Agriculture and Forestry University, Fuzhou, 350002, P. R. China
| | - Ye Xiao
- Guangdong Provincial Key Laboratory of Functional Soft Condensed Matter, School of Material and Energy, Guangdong University of Technology, Guangzhou, 510006, P. R. China
| | - Kai Yan
- Analysis and Test Center, Guangdong University of Technology, Guangzhou, 510006, P. R. China
| | - Yu Zhao
- Guangdong Provincial Key Laboratory of Functional Soft Condensed Matter, School of Material and Energy, Guangdong University of Technology, Guangzhou, 510006, P. R. China
| | - Rui Lin
- Fujian Agriculture and Forestry University, Fuzhou, 350002, P. R. China
| | - Carl Redshaw
- Chemistry School of Natural Sciences, University of Hull, Hull, Yorkshire, HU6 7RX, UK
| | - Yonggang Min
- Guangdong Provincial Key Laboratory of Functional Soft Condensed Matter, School of Material and Energy, Guangdong University of Technology, Guangzhou, 510006, P. R. China
| | - Xinhua Ouyang
- Fujian Agriculture and Forestry University, Fuzhou, 350002, P. R. China
| | - Xing Feng
- Guangdong Provincial Key Laboratory of Functional Soft Condensed Matter, School of Material and Energy, Guangdong University of Technology, Guangzhou, 510006, P. R. China
| |
Collapse
|
5
|
Chen C, Duan C, Zou F, Li J, Yan K. Multifunctionally Reusing Waste Solder to Prepare Highly Efficient Sn-Pb Perovskite Solar Cells. SMALL (WEINHEIM AN DER BERGSTRASSE, GERMANY) 2024; 20:e2312265. [PMID: 38415951 DOI: 10.1002/smll.202312265] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/29/2023] [Revised: 02/13/2024] [Indexed: 02/29/2024]
Abstract
The preparation of perovskite components (PbI2 and SnI2) using waste materials is of great significance for the commercialization of perovskite solar cells (PSCs). However, this goal is difficult to achieve due to the purity of the recovered products and the easy oxidation of Sn2+. Here, a simple one-step synthetic process to convert waste Sn-Pb solder into SnI2/PbI2 and then applied as-prepared SnI2/PbI2 to PSCs for high additional value is adopted. During fabrication, Sn-Pb waste solder is also employed to serve as a reducing agent to reduce the Sn4+ in Sn-Pb mixed narrow perovskite precursor and hence remove the deep trap states in perovskite. The target PSCs achieved an efficiency of 21.04%, which is better than the efficiency of the device with commercial SnI2/PbI2 (20.10%). Meanwhile, the target PSC maintained an initial efficiency of 80% even after 800 h under continuous illumination, which is significantly better than commercial devices. In addition, the method achieved a recovery rate of 90.12% for Sn-Pb waste solder, with a lab-grade purity (over 99.8%) for SnI2/PbI2, and the cost of perovskite active layer reduced to 39.81% through this recycling strategy through calculation.
Collapse
Affiliation(s)
- Chang Chen
- School of Environment and Energy, State Key Laboratory of Luminescent Materials and Devices, Guangdong Provincial Key Laboratory of Solid Wastes Pollution Control and Recycling, South China University of Technology, Guangzhou, 510000, China
| | - Chenghao Duan
- School of Environment and Energy, State Key Laboratory of Luminescent Materials and Devices, Guangdong Provincial Key Laboratory of Solid Wastes Pollution Control and Recycling, South China University of Technology, Guangzhou, 510000, China
| | - Feilin Zou
- School of Environment and Energy, State Key Laboratory of Luminescent Materials and Devices, Guangdong Provincial Key Laboratory of Solid Wastes Pollution Control and Recycling, South China University of Technology, Guangzhou, 510000, China
| | - Jiong Li
- School of Environment and Energy, State Key Laboratory of Luminescent Materials and Devices, Guangdong Provincial Key Laboratory of Solid Wastes Pollution Control and Recycling, South China University of Technology, Guangzhou, 510000, China
| | - Keyou Yan
- School of Environment and Energy, State Key Laboratory of Luminescent Materials and Devices, Guangdong Provincial Key Laboratory of Solid Wastes Pollution Control and Recycling, South China University of Technology, Guangzhou, 510000, China
| |
Collapse
|
6
|
Arunagiri L, Gao F. Molecule doping enables high-quality perovskite junctions for all-perovskite tandem solar cells. Natl Sci Rev 2024; 11:nwae170. [PMID: 38883286 PMCID: PMC11173175 DOI: 10.1093/nsr/nwae170] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/22/2024] [Revised: 05/11/2024] [Accepted: 05/11/2024] [Indexed: 06/18/2024] Open
Affiliation(s)
| | - Feng Gao
- Department of Physics, Chemistry and Biology (IFM), Linköping University, Sweden
| |
Collapse
|
7
|
Wang W, Zhang J, Guo H, Pan Z, Rao H, Zhang G, Zhong X. Limitations and Progresses in Carbon-Based Cesium Lead Halide Perovskite Solar Cells. CHEMSUSCHEM 2024; 17:e202301761. [PMID: 38308586 DOI: 10.1002/cssc.202301761] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/30/2023] [Revised: 01/05/2024] [Accepted: 01/29/2024] [Indexed: 02/05/2024]
Abstract
Inorganic cesium lead halide perovskites (CsPbIxBr3-x, 0≤x≤3) are promising alternatives with great thermal stability. Additionally, the choice of moisture-resistive and dopant-free carbon as the electrode material can simultaneously solve the problems of stability and cost. Therefore, carbon electrode-based inorganic PSCs (C-IPSCs) represent a promising candidate for commercialization, yet both the efficiencies and stability of related devices demand further progress. This article reviews the recent advancement of C-IPSCs and then unravels the distinctive merits and limitations in this field. Subsequently, our perspective on various modification strategies is analyzed on a methodological level. Finally, this article outlooks the promising research contents and the remaining unresolved issues in this field. We believe that understanding and analyzing the related problems in this field are instructive to stimulate the future development of C-IPSCs.
Collapse
Affiliation(s)
- Wenran Wang
- Key Laboratory for Biobased Materials and Energy of Ministry of Education, College of Materials and Energy, South China Agricultural University, No. 483 Wushan Road, 510642, Guangzhou, China
- College of Chemistry and Civil Engineering, Shaoguan University, 512005, Shaoguan, Guangdong, China
- Guangdong Provincial Key Laboratory of Utilization and Conservation of Food and Medicinal Resources in Northern Region, Shaoguan University, 512005, Shaoguan, China
| | - Jianxin Zhang
- Key Laboratory for Biobased Materials and Energy of Ministry of Education, College of Materials and Energy, South China Agricultural University, No. 483 Wushan Road, 510642, Guangzhou, China
| | - Huishi Guo
- College of Chemistry and Civil Engineering, Shaoguan University, 512005, Shaoguan, Guangdong, China
- Guangdong Provincial Key Laboratory of Utilization and Conservation of Food and Medicinal Resources in Northern Region, Shaoguan University, 512005, Shaoguan, China
| | - Zhenxiao Pan
- Key Laboratory for Biobased Materials and Energy of Ministry of Education, College of Materials and Energy, South China Agricultural University, No. 483 Wushan Road, 510642, Guangzhou, China
| | - Huashang Rao
- Key Laboratory for Biobased Materials and Energy of Ministry of Education, College of Materials and Energy, South China Agricultural University, No. 483 Wushan Road, 510642, Guangzhou, China
| | - Guizhi Zhang
- Key Laboratory for Biobased Materials and Energy of Ministry of Education, College of Materials and Energy, South China Agricultural University, No. 483 Wushan Road, 510642, Guangzhou, China
| | - Xinhua Zhong
- Key Laboratory for Biobased Materials and Energy of Ministry of Education, College of Materials and Energy, South China Agricultural University, No. 483 Wushan Road, 510642, Guangzhou, China
| |
Collapse
|
8
|
Ali N, Shehzad K, Attique S, Ali A, Akram F, Younis A, Ali S, Sun Y, Yu G, Wu H, Dai N. Exploring Non-Toxic Lower Dimensional Perovskites for Next-Generation X-Ray Detectors. SMALL (WEINHEIM AN DER BERGSTRASSE, GERMANY) 2024; 20:e2310946. [PMID: 38229536 DOI: 10.1002/smll.202310946] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/14/2023] [Indexed: 01/18/2024]
Abstract
Owing to their extraordinary photophysical properties, organometal halide perovskites are emerging as a new material class for X-ray detection. However, the existence of toxic lead makes their commercialization questionable and should readily be replaced. Accordingly, several lead alternatives have been introduced into the framework of conventional perovskites, resulting in various new perovskite dimensionalities. Among these, Pb-free lower dimensional perovskites (LPVKs) not only show promising X-ray detecting properties due to their higher ionic migration energy, wider and tunable energy bandgap, smaller dark currents, and structural versatility but also exhibit extended environmental stability. Herein, first, the structural organization of the PVKs (including LPVKs) is summarized. In the context of X-ray detectors (XDs), the outstanding properties of the LPVKs and active layer synthesis routes are elaborated afterward. Subsequently, their applications in direct XDs are extensively discussed and the device performance, in terms of the synthesis method, device architecture, active layer size, figure of merits, and device stability are tabulated. Finally, the review is concluded with an in-depth outlook, thoroughly exploring the present challenges to LPVKs XDs, proposing innovative solutions, and future directions. This review provides valuable insights into optimizing non-toxic Pb-free perovskite XDs, paving the way for future advancements in the field.
Collapse
Affiliation(s)
- Nasir Ali
- Research Center for Frontier Fundamental Studies, Zhejiang Labs, Yuhang District, Hangzhou, Zhejiang, 311121, P. R. China
| | - Khurram Shehzad
- Research Center for Frontier Fundamental Studies, Zhejiang Labs, Yuhang District, Hangzhou, Zhejiang, 311121, P. R. China
| | - Sanam Attique
- State Key Laboratory of Extreme Photonics and Instrumentation, College of Optical Science and Engineering, Zhejiang University, Hangzhou, 310027, P. R. China
| | - Ayaz Ali
- Research Center for Frontier Fundamental Studies, Zhejiang Labs, Yuhang District, Hangzhou, Zhejiang, 311121, P. R. China
| | - Fazli Akram
- Center for High Technology Materials and the Department of Mechanical Engineering, The University of New Mexico, Albuquerque, NM, 87131, USA
| | - Adnan Younis
- Department of Physics, College of Science, United Arab Emirates University, Al-Ain, 15551, United Arab Emirates
| | - Shahid Ali
- Department of Physics, University of Peshawar, Peshawar, 25000, Pakistan
| | - Yan Sun
- Research Center for Frontier Fundamental Studies, Zhejiang Labs, Yuhang District, Hangzhou, Zhejiang, 311121, P. R. China
| | - Guolin Yu
- Research Center for Frontier Fundamental Studies, Zhejiang Labs, Yuhang District, Hangzhou, Zhejiang, 311121, P. R. China
| | - Huizhen Wu
- Research Center for Frontier Fundamental Studies, Zhejiang Labs, Yuhang District, Hangzhou, Zhejiang, 311121, P. R. China
- School of Physics, State Key Laboratory for Silicon Materials, Zhejiang University, Hangzhou, 310027, P. R. China
| | - Ning Dai
- Research Center for Frontier Fundamental Studies, Zhejiang Labs, Yuhang District, Hangzhou, Zhejiang, 311121, P. R. China
| |
Collapse
|
9
|
Pishro KA, Gonzalez MH. Use of deep eutectic solvents in environmentally-friendly dye-sensitized solar cells and their physicochemical properties: a brief review. RSC Adv 2024; 14:14480-14504. [PMID: 38708112 PMCID: PMC11063684 DOI: 10.1039/d4ra01610f] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/01/2024] [Accepted: 04/08/2024] [Indexed: 05/07/2024] Open
Abstract
A novel way to mitigate the greenhouse effect is to use dye-sensitized solar cells (DSSCs) to convert carbon dioxide from the air into useful products, such as hydrocarbons, which can also store energy from the sun, a plentiful, clean, and safe resource. The conversion of CO2 can help reduce the impacts of greenhouse gas emissions that contribute to global warming. However, there is a major obstacle in using DSSCs, since many solar devices operate with organic electrolytes, producing pollutants including toxic substances. Therefore, a key research area is to find new eco-friendly electrolytes that can effectively dissolve carbon dioxide. One option is to use deep eutectic solvents (DESs), which are potential substitutes for ionic liquids (ILs) and have similar advantages, such as being customizable, economical, and environmentally friendly. DESs are composed of low-cost materials and have very low toxicity and high biodegradability, making them suitable for use as electrolytes in DSSCs, within the framework of green chemistry. The purpose of this brief review is to explore the existing knowledge about how CO2 dissolves in DESs and how these solvents can be used as electrolytes in solar devices, especially in DSSCs. The physical and chemical properties of the DESs are described, and areas are suggested where further research should be focused.
Collapse
Affiliation(s)
- Khatereh A Pishro
- São Paulo State University (UNESP), Institute of Biosciences, Humanities and Exact Sciences (IBILCE), National Institute for Alternative Technologies of Detection, Toxicological Evaluation and Removal of Micropollutants and Radioactives (INCT-DATREM) São José do Rio Preto SP 15054-000 Brazil +55 17 32212512 +55 17 32212512
| | - Mario Henrique Gonzalez
- São Paulo State University (UNESP), Institute of Biosciences, Humanities and Exact Sciences (IBILCE), National Institute for Alternative Technologies of Detection, Toxicological Evaluation and Removal of Micropollutants and Radioactives (INCT-DATREM) São José do Rio Preto SP 15054-000 Brazil +55 17 32212512 +55 17 32212512
| |
Collapse
|
10
|
Asghar U, Qamar MA, Hakami O, Ali SK, Imran M, Farhan A, Parveen H, Sharma M. Recent Advances in Carbon Nanotube Utilization in Perovskite Solar Cells: A Review. MICROMACHINES 2024; 15:529. [PMID: 38675340 PMCID: PMC11051801 DOI: 10.3390/mi15040529] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/21/2024] [Revised: 03/25/2024] [Accepted: 04/11/2024] [Indexed: 04/28/2024]
Abstract
Due to their exceptional optoelectronic properties, halide perovskites have emerged as prominent materials for the light-absorbing layer in various optoelectronic devices. However, to increase device performance for wider adoption, it is essential to find innovative solutions. One promising solution is incorporating carbon nanotubes (CNTs), which have shown remarkable versatility and efficacy. In these devices, CNTs serve multiple functions, including providing conducting substrates and electrodes and improving charge extraction and transport. The next iteration of photovoltaic devices, metal halide perovskite solar cells (PSCs), holds immense promise. Despite significant progress, achieving optimal efficiency, stability, and affordability simultaneously remains a challenge, and overcoming these obstacles requires the development of novel materials known as CNTs, which, owing to their remarkable electrical, optical, and mechanical properties, have garnered considerable attention as potential materials for highly efficient PSCs. Incorporating CNTs into perovskite solar cells offers versatility, enabling improvements in device performance and longevity while catering to diverse applications. This article provides an in-depth exploration of recent advancements in carbon nanotube technology and its integration into perovskite solar cells, serving as transparent conductive electrodes, charge transporters, interlayers, hole-transporting materials, and back electrodes. Additionally, we highlighted key challenges and offered insights for future enhancements in perovskite solar cells leveraging CNTs.
Collapse
Affiliation(s)
- Usman Asghar
- Center of Excellence in Solid State Physics, University of the Punjab, Lahore 54590, Pakistan;
| | - Muhammad Azam Qamar
- Department of Chemistry, School of Science, University of Management and Technology, Lahore 54770, Pakistan
| | - Othman Hakami
- Department of Physical Sciences, Chemistry Division, College of Science, Jazan University, P.O. Box 114, Jazan 45142, Saudi Arabia;
| | - Syed Kashif Ali
- Department of Physical Sciences, Chemistry Division, College of Science, Jazan University, P.O. Box 114, Jazan 45142, Saudi Arabia;
- Nanotechnology Research Unit, College of Science, Jazan University, P.O. Box 114, Jazan 45142, Saudi Arabia
| | - Mohd Imran
- Department of Chemical Engineering, College of Engineering, Jazan University, P.O. Box 706, Jazan 45142, Saudi Arabia;
| | - Ahmad Farhan
- Department of Chemistry, University of Agriculture Faisalabad, Faisalabad 38000, Pakistan;
| | - Humaira Parveen
- Department of Chemistry, Faculty of Science, University of Tabuk, Tabuk 71491, Saudi Arabia;
| | - Mukul Sharma
- Environment and Nature Research Centre, Jazan University, P.O. Box 114, Jazan 45142, Saudi Arabia;
| |
Collapse
|
11
|
Liu S, Lu Y, Yu C, Li J, Luo R, Guo R, Liang H, Jia X, Guo X, Wang YD, Zhou Q, Wang X, Yang S, Sui M, Müller-Buschbaum P, Hou Y. Triple-junction solar cells with cyanate in ultrawide-bandgap perovskites. Nature 2024; 628:306-312. [PMID: 38438067 DOI: 10.1038/s41586-024-07226-1] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/10/2023] [Accepted: 02/22/2024] [Indexed: 03/06/2024]
Abstract
Perovskite bandgap tuning without quality loss makes perovskites unique among solar absorbers, offering promising avenues for tandem solar cells1,2. However, minimizing the voltage loss when their bandgap is increased to above 1.90 eV for triple-junction tandem use is challenging3-5. Here we present a previously unknown pseudohalide, cyanate (OCN-), with a comparable effective ionic radius (1.97 Å) to bromide (1.95 Å) as a bromide substitute. Electron microscopy and X-ray scattering confirm OCN incorporation into the perovskite lattice. This contributes to notable lattice distortion, ranging from 90.5° to 96.6°, a uniform iodide-bromide distribution and consistent microstrain. Owing to these effects, OCN-based perovskite exhibits enhanced defect formation energy and substantially decreased non-radiative recombination. We achieved an inverted perovskite (1.93 eV) single-junction device with an open-circuit voltage (VOC) of 1.422 V, a VOC × FF (fill factor) product exceeding 80% of the Shockley-Queisser limit and stable performance under maximum power point tracking, culminating in a 27.62% efficiency (27.10% certified efficiency) perovskite-perovskite-silicon triple-junction solar cell with 1 cm2 aperture area.
Collapse
Affiliation(s)
- Shunchang Liu
- Department of Chemical and Biomolecular Engineering, National University of Singapore, Singapore, Singapore
- Solar Energy Research Institute of Singapore (SERIS), National University of Singapore, Singapore, Singapore
| | - Yue Lu
- Beijing Key Laboratory of Microstructure and Properties of Solids, Faculty of Materials and Manufacturing, Beijing University of Technology, Beijing, People's Republic of China
| | - Cao Yu
- Suzhou Maxwell Technologies, Suzhou, People's Republic of China
| | - Jia Li
- Solar Energy Research Institute of Singapore (SERIS), National University of Singapore, Singapore, Singapore
| | - Ran Luo
- Department of Chemical and Biomolecular Engineering, National University of Singapore, Singapore, Singapore
- Solar Energy Research Institute of Singapore (SERIS), National University of Singapore, Singapore, Singapore
| | - Renjun Guo
- Solar Energy Research Institute of Singapore (SERIS), National University of Singapore, Singapore, Singapore
| | - Haoming Liang
- Department of Chemical and Biomolecular Engineering, National University of Singapore, Singapore, Singapore
- Solar Energy Research Institute of Singapore (SERIS), National University of Singapore, Singapore, Singapore
| | - Xiangkun Jia
- Department of Chemical and Biomolecular Engineering, National University of Singapore, Singapore, Singapore
- Solar Energy Research Institute of Singapore (SERIS), National University of Singapore, Singapore, Singapore
| | - Xiao Guo
- Department of Chemical and Biomolecular Engineering, National University of Singapore, Singapore, Singapore
- Solar Energy Research Institute of Singapore (SERIS), National University of Singapore, Singapore, Singapore
| | - Yu-Duan Wang
- Department of Chemical and Biomolecular Engineering, National University of Singapore, Singapore, Singapore
- Solar Energy Research Institute of Singapore (SERIS), National University of Singapore, Singapore, Singapore
| | - Qilin Zhou
- Department of Chemical and Biomolecular Engineering, National University of Singapore, Singapore, Singapore
- Solar Energy Research Institute of Singapore (SERIS), National University of Singapore, Singapore, Singapore
| | - Xi Wang
- Department of Chemical and Biomolecular Engineering, National University of Singapore, Singapore, Singapore
- Solar Energy Research Institute of Singapore (SERIS), National University of Singapore, Singapore, Singapore
| | - Shaofei Yang
- Suzhou Maxwell Technologies, Suzhou, People's Republic of China
| | - Manling Sui
- Beijing Key Laboratory of Microstructure and Properties of Solids, Faculty of Materials and Manufacturing, Beijing University of Technology, Beijing, People's Republic of China
| | - Peter Müller-Buschbaum
- TUM School of Natural Sciences, Department of Physics, Chair for Functional Materials, Technical University of Munich, Garching, Germany
- Heinz Maier-Leibniz Zentrum (MLZ), Technical University of Munich, Garching, Germany
| | - Yi Hou
- Department of Chemical and Biomolecular Engineering, National University of Singapore, Singapore, Singapore.
- Solar Energy Research Institute of Singapore (SERIS), National University of Singapore, Singapore, Singapore.
| |
Collapse
|
12
|
Xiong Z, Wu L, Zhou X, Yang S, Liu Z, Liu W, Zhao J, Li W, Yu C, Yao K. Constructing tin oxides Interfacial Layer with Gradient Compositions for Efficient Perovskite/Silicon Tandem Solar Cells with Efficiency Exceeding 28. SMALL (WEINHEIM AN DER BERGSTRASSE, GERMANY) 2024; 20:e2308024. [PMID: 37992243 DOI: 10.1002/smll.202308024] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 09/13/2023] [Revised: 10/31/2023] [Indexed: 11/24/2023]
Abstract
Atomic layer deposition (ALD) growth of conformal thin SnOx films on perovskite absorbers offers a promising method to improve carrier-selective contacts, enable sputter processing, and prevent humidity ingress toward high-performance tandem perovskite solar cells. However, the interaction between perovskite materials and reactive ALD precursor limits the process parameters of ALD-SnOx film and requires an additional fullerene layer. Here, it demonstrates that reducing the water dose to deposit SnOx can reduce the degradation effect upon the perovskite underlayer while increasing the water dose to promote the oxidization can improve the electrical properties. Accordingly, a SnOx buffer layer with a gradient composition structure is designed, in which the compositionally varying are achieved by gradually increasing the oxygen source during the vapor deposition from the bottom to the top layer. In addition, the gradient SnOx structure with favorable energy funnels significantly enhances carrier extraction, further minimizing its dependence on the fullerene layer. Its broad applicability for different perovskite compositions and various textured morphology is demonstrated. Notably, the design boosts the efficiencies of perovskite/silicon tandem cells (1.0 cm2) on industrially textured Czochralski (CZ) silicon to a certified efficiency of 28.0%.
Collapse
Affiliation(s)
- Zhijun Xiong
- Institute of Photovoltaics, School of Physics and Materials Science, Nanchang University, Nanchang, 330031, China
| | - Long Wu
- Institute of Photovoltaics, School of Physics and Materials Science, Nanchang University, Nanchang, 330031, China
| | - Xiaoheng Zhou
- Institute of Photovoltaics, School of Physics and Materials Science, Nanchang University, Nanchang, 330031, China
| | - Shaofei Yang
- Suzhou Maxwell Technologies Co., Ltd., Suzhou, 215200, China
| | - Zhiliang Liu
- Institute of Photovoltaics, School of Physics and Materials Science, Nanchang University, Nanchang, 330031, China
- Suzhou Maxwell Technologies Co., Ltd., Suzhou, 215200, China
| | - Wentao Liu
- Institute of Photovoltaics, School of Physics and Materials Science, Nanchang University, Nanchang, 330031, China
| | - Jie Zhao
- Institute of Photovoltaics, School of Physics and Materials Science, Nanchang University, Nanchang, 330031, China
| | - Wei Li
- State Key Laboratory of Advanced Technology for Materials Synthesis and Processing, Wuhan University of Technology, Wuhan, 430070, China
| | - Cao Yu
- Suzhou Maxwell Technologies Co., Ltd., Suzhou, 215200, China
| | - Kai Yao
- Institute of Photovoltaics, School of Physics and Materials Science, Nanchang University, Nanchang, 330031, China
| |
Collapse
|
13
|
Ternes S, Laufer F, Paetzold UW. Modeling and Fundamental Dynamics of Vacuum, Gas, and Antisolvent Quenching for Scalable Perovskite Processes. ADVANCED SCIENCE (WEINHEIM, BADEN-WURTTEMBERG, GERMANY) 2024; 11:e2308901. [PMID: 38308172 PMCID: PMC11005745 DOI: 10.1002/advs.202308901] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/05/2023] [Indexed: 02/04/2024]
Abstract
Hybrid perovskite photovoltaics (PVs) promise cost-effective fabrication with large-scale solution-based manufacturing processes as well as high power conversion efficiencies. Almost all of today's high-performance solution-processed perovskite absorber films rely on so-called quenching techniques that rapidly increase supersaturation to induce a prompt crystallization. However, to date, there are no metrics for comparing results obtained with different quenching methods. In response, the first quantitative modeling framework for gas quenching, anti-solvent quenching, and vacuum quenching is developed herein. Based on dynamic thickness measurements in a vacuum chamber, previous works on drying dynamics, and commonly known material properties, a detailed analysis of mass transfer dynamics is performed for each quenching technique. The derived models are delivered along with an open-source software framework that is modular and extensible. Thereby, a deep understanding of the impact of each process parameter on mass transfer dynamics is provided. Moreover, the supersaturation rate at critical concentration is proposed as a decisive benchmark of quenching effectiveness, yielding ≈ 10-3 - 10-1s-1 for vacuum quenching, ≈ 10-5 - 10-3s-1 for static gas quenching, ≈ 10-2 - 100s-1 for dynamic gas quenching and ≈ 102s-1 for antisolvent quenching. This benchmark fosters transferability and scalability of hybrid perovskite fabrication, transforming the "art of device making" to well-defined process engineering.
Collapse
Affiliation(s)
- Simon Ternes
- CHOSE–Center for Hybrid and Organic Solar EnergyDepartment of Electrical EngineeringUniversity of Rome “Tor Vergata”via del Politecnico 1Rome00133Italy
- Light Technology Institute (LTI)Karlsruhe Institute of Technology (KIT)Engesserstrasse 1376131KarlsruheGermany
- Institute of Microstructure Technology (IMT)Karlsruhe Institute of Technology (KIT)Hermann‐von‐Helmholtz‐Platz 176344Eggenstein‐LeopoldshafenGermany
| | - Felix Laufer
- Light Technology Institute (LTI)Karlsruhe Institute of Technology (KIT)Engesserstrasse 1376131KarlsruheGermany
| | - Ulrich W. Paetzold
- Light Technology Institute (LTI)Karlsruhe Institute of Technology (KIT)Engesserstrasse 1376131KarlsruheGermany
- Institute of Microstructure Technology (IMT)Karlsruhe Institute of Technology (KIT)Hermann‐von‐Helmholtz‐Platz 176344Eggenstein‐LeopoldshafenGermany
| |
Collapse
|
14
|
Yang J, Bao Q. Enhancing perovskite-silicon tandem solar cells through numerical optical and electric optimizations for light management. OPTICS EXPRESS 2024; 32:8614-8622. [PMID: 38571116 DOI: 10.1364/oe.513887] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/02/2024] [Accepted: 02/13/2024] [Indexed: 04/05/2024]
Abstract
We integrated optical and electrical numerical simulations to precisely investigate the effectiveness of using a pyramidal perovskite (Cs0.18FA0.82Pb(I,Br)3) nanostructured film as an example in perovskite-silicon tandem solar cells to reduce reflective losses and balance the current densities. Through our calculations, the PCE of tandem solar cells can be improved from 29.2% (the planar structures without texturing) to 36.1% in the best-performing textured tandem devices under the consistently calculated absorbed and EQE spectrum, where the predicted open-circuit voltage could reach over 2 V. These findings offer valuable theoretical insights for the advancement and optimization of perovskite-silicon tandem solar cells.
Collapse
|
15
|
Shcherbakov-Wu W, Saris S, Sheehan TJ, Wong NN, Powers ER, Krieg F, Kovalenko MV, Willard AP, Tisdale WA. Persistent enhancement of exciton diffusivity in CsPbBr 3 nanocrystal solids. SCIENCE ADVANCES 2024; 10:eadj2630. [PMID: 38381813 PMCID: PMC10881049 DOI: 10.1126/sciadv.adj2630] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/15/2023] [Accepted: 01/19/2024] [Indexed: 02/23/2024]
Abstract
In semiconductors, exciton or charge carrier diffusivity is typically described as an inherent material property. Here, we show that the transport of excitons among CsPbBr3 perovskite nanocrystals (NCs) depends markedly on how recently those NCs were occupied by a previous exciton. Using transient photoluminescence microscopy, we observe a striking dependence of the apparent exciton diffusivity on excitation laser power that does not arise from nonlinear exciton-exciton interactions or thermal heating. We interpret our observations with a model in which excitons cause NCs to transition to a long-lived metastable configuration that markedly increases exciton transport. The exciton diffusivity observed here (>0.15 square centimeters per second) is considerably higher than that observed in other NC systems, revealing unusually strong excitonic coupling between NCs. The finding of a persistent enhancement in excitonic coupling may help explain other photophysical behaviors observed in CsPbBr3 NCs, such as superfluorescence, and inform the design of optoelectronic devices.
Collapse
Affiliation(s)
- Wenbi Shcherbakov-Wu
- Department of Chemical Engineering, Massachusetts Institute of Technology, Cambridge, MA, USA
- Department of Chemistry, Massachusetts Institute of Technology, Cambridge, MA, USA
| | - Seryio Saris
- Department of Chemical Engineering, Massachusetts Institute of Technology, Cambridge, MA, USA
- Laboratory of Nanochemistry for Energy (LNCE), Institute of Chemical Sciences and Engineering (ISIC), École Polytechnique Fédérale de Lausanne, CH-1950 Sion, Switzerland
| | - Thomas John Sheehan
- Department of Chemical Engineering, Massachusetts Institute of Technology, Cambridge, MA, USA
| | - Narumi Nagaya Wong
- Department of Chemical Engineering, Massachusetts Institute of Technology, Cambridge, MA, USA
| | - Eric R. Powers
- Department of Chemical Engineering, Massachusetts Institute of Technology, Cambridge, MA, USA
| | - Franziska Krieg
- Department of Chemistry and Applied Bioscience, ETH Zürich, Zürich, Switzerland
- Laboratory for Thin Films and Photovoltaics and Laboratory for Transport at Nanoscale Interfaces, Empa – Swiss Federal Laboratories for Materials Science and Technology, Dübendorf, Switzerland
| | - Maksym V. Kovalenko
- Department of Chemistry and Applied Bioscience, ETH Zürich, Zürich, Switzerland
- Laboratory for Thin Films and Photovoltaics and Laboratory for Transport at Nanoscale Interfaces, Empa – Swiss Federal Laboratories for Materials Science and Technology, Dübendorf, Switzerland
| | - Adam P. Willard
- Department of Chemistry, Massachusetts Institute of Technology, Cambridge, MA, USA
| | - William A. Tisdale
- Department of Chemical Engineering, Massachusetts Institute of Technology, Cambridge, MA, USA
| |
Collapse
|
16
|
Niu G, Jiang J, Wang X, Che L, Sui L, Wu G, Yuan K, Yang X. Time-Resolved Dynamics of Metal Halide Perovskite under High Pressure: Recent Progress and Challenges. J Phys Chem Lett 2024; 15:1623-1635. [PMID: 38306470 DOI: 10.1021/acs.jpclett.3c03548] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 02/04/2024]
Abstract
Metal halide perovskites have garnered significant attention in the scientific community for their promising applications in optoelectronic devices. The application of pressure engineering, a viable technique, has played a crucial role in substantially improving the optoelectronic characteristics of perovskites. Despite notable progress in understanding ground-state structural changes under high pressure, a comprehensive exploration of excited-state dynamics influencing luminescence remains incomplete. This Perspective delves into recent advances in time-resolved dynamics studies of photoexcited metal halide perovskites under high pressure. With a focus on the intricate interplay between structural alterations and electronic properties, we investigate electron-phonon interactions, carrier transport mechanisms, and the influential roles of self-trapped excitons (STEs) and coherent phonons in luminescence. However, significant challenges persist, notably the need for more advanced measurement techniques and a deeper understanding of the phenomena induced by high pressure in perovskites.
Collapse
Affiliation(s)
- Guangming Niu
- Marine Engineering College, Dalian Maritime University, Dalian 116026, P. R. China
- State Key Laboratory of Molecular Reaction Dynamics and Dalian Coherent Light Source, Dalian Institute of Chemical Physics Chinese Academy of Sciences 457 Zhongshan Road, Dalian 116023, P. R. China
| | - Jutao Jiang
- State Key Laboratory of Molecular Reaction Dynamics and Dalian Coherent Light Source, Dalian Institute of Chemical Physics Chinese Academy of Sciences 457 Zhongshan Road, Dalian 116023, P. R. China
- University of the Chinese Academy of Sciences, Beijing 100039, P. R. China
| | - Xiaowei Wang
- State Key Laboratory of Molecular Reaction Dynamics and Dalian Coherent Light Source, Dalian Institute of Chemical Physics Chinese Academy of Sciences 457 Zhongshan Road, Dalian 116023, P. R. China
- University of the Chinese Academy of Sciences, Beijing 100039, P. R. China
| | - Li Che
- Department of Physics School of Science, Dalian Maritime University, Dalian 116026, P. R. China
| | - Laizhi Sui
- State Key Laboratory of Molecular Reaction Dynamics and Dalian Coherent Light Source, Dalian Institute of Chemical Physics Chinese Academy of Sciences 457 Zhongshan Road, Dalian 116023, P. R. China
| | - Guorong Wu
- State Key Laboratory of Molecular Reaction Dynamics and Dalian Coherent Light Source, Dalian Institute of Chemical Physics Chinese Academy of Sciences 457 Zhongshan Road, Dalian 116023, P. R. China
| | - Kaijun Yuan
- State Key Laboratory of Molecular Reaction Dynamics and Dalian Coherent Light Source, Dalian Institute of Chemical Physics Chinese Academy of Sciences 457 Zhongshan Road, Dalian 116023, P. R. China
- University of the Chinese Academy of Sciences, Beijing 100039, P. R. China
- Hefei National Laboratory, Hefei 230088, China
| | - Xueming Yang
- State Key Laboratory of Molecular Reaction Dynamics and Dalian Coherent Light Source, Dalian Institute of Chemical Physics Chinese Academy of Sciences 457 Zhongshan Road, Dalian 116023, P. R. China
- Hefei National Laboratory, Hefei 230088, China
- Department of Chemistry College of Science, Southern University of Science and Technology, Shenzhen 518055, P. R. China
| |
Collapse
|
17
|
Zhang P, Li C, He M, Liu Z, Hao X. The Intermediate Connection of Subcells in Si-based Tandem Solar Cells. SMALL METHODS 2024; 8:e2300432. [PMID: 37530212 DOI: 10.1002/smtd.202300432] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 04/02/2023] [Revised: 06/25/2023] [Indexed: 08/03/2023]
Abstract
Tandem solar cells are rationally designed and fabricated by stacking multiple subcells to achieve power conversion efficiency well above the Shockley-Queisser (SQ) limit. There is a large selection pool for the subcell candidates, such as Si, III-V, Kesterite, Perovskite, and organic solar cells. A series of different combinations of these subcells have been successfully demonstrated in practical tandem solar cell devices. However, there has not been a systematic summary of how to connect subcells in a tandem solar cell using a practical, cost-effective, and efficiency-beneficial fashion. In this work, the connection manners of subcells within a tandem cell are classified into three main categories, performing sequential growth, using the physical connection, and applying an intermediate layer, focusing on systematical description of intermediate layers using different materials. The advantages and disadvantages of these connection methods and their applicability to tandem cell types are further elaborated using two typical example models, III-V/Si and Perovskite inclusive tandem cell devices. Eventually, this work can provide useful guidance on how to carry out a suitable intermediate connection in the design of tandem solar cells depending on the selected subcells and device structure.
Collapse
Affiliation(s)
- Pengfei Zhang
- Australian Centre for Advanced Photovoltaics, School of Photovoltaic and Renewable Energy Engineering, University of New South Wales, Sydney, NSW, 2052, Australia
| | - Caixia Li
- Australian Centre for Advanced Photovoltaics, School of Photovoltaic and Renewable Energy Engineering, University of New South Wales, Sydney, NSW, 2052, Australia
| | - Mingrui He
- Australian Centre for Advanced Photovoltaics, School of Photovoltaic and Renewable Energy Engineering, University of New South Wales, Sydney, NSW, 2052, Australia
| | - Ziheng Liu
- Australian Centre for Advanced Photovoltaics, School of Photovoltaic and Renewable Energy Engineering, University of New South Wales, Sydney, NSW, 2052, Australia
| | - Xiaojing Hao
- Australian Centre for Advanced Photovoltaics, School of Photovoltaic and Renewable Energy Engineering, University of New South Wales, Sydney, NSW, 2052, Australia
| |
Collapse
|
18
|
Irshad Z, Lee W, Adnan M, Choi Y, Park T, Lim J. Elucidating Charge Carrier Dynamics in Perovskite-Based Tandem Solar Cells. SMALL METHODS 2024; 8:e2300238. [PMID: 37322273 DOI: 10.1002/smtd.202300238] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/24/2023] [Revised: 05/26/2023] [Indexed: 06/17/2023]
Abstract
Recently, multijunction tandem solar cells (TSCs) have presented high power conversion efficiency and revealed their immense potential in photovoltaic evolution. It is demonstrated that multiple light absorbers with various bandgap energies overcome the Shockley-Queisser limit of single-junction solar cells by absorbing the wide-range wavelength photons. Here, the main key challenges are reviewed, especially the charge carrier dynamics in perovskite-based 2-terminal (2-T) TSCs in terms of current matching, and how to manage these issues from a vantage point of characterization. To do this, the effect of recombination layers, optical and fabrication hurdles, and the impact of wide bandgap perovskite solar cells are discussed extensively. Afterward, this review focuses on various optoelectronics, spectroscopic, and theoretical (optical simulation) characterizations to figure out those issues, especially current-matching issues faced by the photovoltaic society. This review comprehensively provides deep insights into the relationship between the current-matching problems and the photovoltaic performance of TSCs through a variety of perspectives. Consequently, it is believed that this review is essential to address the main problems of 2-T TSCs, and the suggestions to elucidate the charge carrier dynamics and its characterization may pave the way to overcome such obstacles to further improve the development of 2-T TSCs in relation to the current-matching problems.
Collapse
Affiliation(s)
- Zobia Irshad
- Graduate School of Energy Science and Technology, Chungnam National University, Daejeon, 34134, Republic of Korea
| | - Wonjong Lee
- Graduate School of Energy Science and Technology, Chungnam National University, Daejeon, 34134, Republic of Korea
| | - Muhammad Adnan
- Graduate School of Energy Science and Technology, Chungnam National University, Daejeon, 34134, Republic of Korea
| | - Yelim Choi
- Department of Chemical Engineering, Pohang University of Science and Technology, Pohang, 37673, Republic of Korea
| | - Taiho Park
- Department of Chemical Engineering, Pohang University of Science and Technology, Pohang, 37673, Republic of Korea
| | - Jongchul Lim
- Graduate School of Energy Science and Technology, Chungnam National University, Daejeon, 34134, Republic of Korea
| |
Collapse
|
19
|
Puerto Galvis CE, González Ruiz DA, Martínez-Ferrero E, Palomares E. Challenges in the design and synthesis of self-assembling molecules as selective contacts in perovskite solar cells. Chem Sci 2024; 15:1534-1556. [PMID: 38303950 PMCID: PMC10829004 DOI: 10.1039/d3sc04668k] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/04/2023] [Accepted: 11/08/2023] [Indexed: 02/03/2024] Open
Abstract
Self-assembling molecules (SAMs), as selective contacts, play an important role in perovskite solar cells (PSCs), determining the performance and stability of these photovoltaic devices. These materials offer many advantages over other traditional materials used as hole-selective contacts, as they can be easily deposited on a large area of metal oxides, can modify the work function of these substrates, and reduce optical and electric losses with low material consumption. However, the most interesting thing about SAMs is that by modifying the chemical structure of the small molecules used, the energy levels, molecular dipoles, and surface properties of this assembled monolayer can be modulated to fine-tune the desired interactions between the substrate and the active layer. Due to the important role of organic chemistry in the field of photovoltaics, in this review, we will cover the current challenges for the design and synthesis of SAMs PSCs. Discussing, the structural features that define a SAM, (ii) disclosing how commercial molecules inspired the synthesis of new SAMs; and (iii) detailing the pros- and cons- of the reported synthetic protocols that have been employed for the synthesis of molecules for SAMs, helping synthetic chemists to develop novel structures and promoting the fast industrialization of PSCs.
Collapse
Affiliation(s)
- Carlos E Puerto Galvis
- Institute of Chemical Research of Catalonia (ICIQ) Avda. Països Catalans, 16 Tarragona Spain
| | - Dora A González Ruiz
- Institute of Chemical Research of Catalonia (ICIQ) Avda. Països Catalans, 16 Tarragona Spain
- Departament d'Enginyeria Electrònica, Elèctrica i Automàtica., Universitat Rovira i Virgili Avda. Països Catalans, 26 Tarragona Spain
| | | | - Emilio Palomares
- Institute of Chemical Research of Catalonia (ICIQ) Avda. Països Catalans, 16 Tarragona Spain
- Catalan Institution for Research and Advanced Studies (ICREA) Passeig Lluïs Companys, 23 Barcelona Spain
| |
Collapse
|
20
|
Chen Q, Zhou L, Zhang J, Chen D, Zhu W, Xi H, Zhang J, Zhang C, Hao Y. Recent Progress of Wide Bandgap Perovskites towards Two-Terminal Perovskite/Silicon Tandem Solar Cells. NANOMATERIALS (BASEL, SWITZERLAND) 2024; 14:202. [PMID: 38251165 PMCID: PMC10820607 DOI: 10.3390/nano14020202] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/15/2023] [Revised: 01/09/2024] [Accepted: 01/11/2024] [Indexed: 01/23/2024]
Abstract
Perovskite/silicon tandem solar cells have garnered considerable interest due to their potential to surpass the Shockley-Queisser limit of single-junction Si solar cells. The rapidly advanced efficiencies of perovskite/silicon tandem solar cells benefit from the significant improvements in perovskite technology. Beginning with the evolution of wide bandgap perovskite cells towards two-terminal (2T) perovskite/silicon tandem solar cells, this work concentrates on component engineering, additives, and interface modification of wide bandgap perovskite cells. Furthermore, the advancements in 2T perovskite/silicon tandem solar cells are presented, and the influence of the central interconnect layer and the Si cell on the progression of the tandem solar cells is emphasized. Finally, we discuss the challenges and obstacles associated with 2T perovskite/silicon tandem solar cells, conducting a thorough analysis and providing a prospect for their future.
Collapse
Affiliation(s)
- Qianyu Chen
- National Key Laboratory of Wide Bandgap Semiconductor Devices and Integrated Technology and Shaanxi Joint Key Laboratory of Graphene, School of Microelectronics, Xidian University, Xi’an 710071, China
| | - Long Zhou
- National Key Laboratory of Wide Bandgap Semiconductor Devices and Integrated Technology and Shaanxi Joint Key Laboratory of Graphene, School of Microelectronics, Xidian University, Xi’an 710071, China
- Xi’an Baoxin Solar Technology Co., Ltd., Xi’an 710071, China
| | - Jiaojiao Zhang
- National Key Laboratory of Wide Bandgap Semiconductor Devices and Integrated Technology and Shaanxi Joint Key Laboratory of Graphene, School of Microelectronics, Xidian University, Xi’an 710071, China
| | - Dazheng Chen
- National Key Laboratory of Wide Bandgap Semiconductor Devices and Integrated Technology and Shaanxi Joint Key Laboratory of Graphene, School of Microelectronics, Xidian University, Xi’an 710071, China
- Xi’an Baoxin Solar Technology Co., Ltd., Xi’an 710071, China
| | - Weidong Zhu
- National Key Laboratory of Wide Bandgap Semiconductor Devices and Integrated Technology and Shaanxi Joint Key Laboratory of Graphene, School of Microelectronics, Xidian University, Xi’an 710071, China
- Xi’an Baoxin Solar Technology Co., Ltd., Xi’an 710071, China
| | - He Xi
- National Key Laboratory of Wide Bandgap Semiconductor Devices and Integrated Technology and Shaanxi Joint Key Laboratory of Graphene, School of Microelectronics, Xidian University, Xi’an 710071, China
- Xi’an Baoxin Solar Technology Co., Ltd., Xi’an 710071, China
| | - Jincheng Zhang
- National Key Laboratory of Wide Bandgap Semiconductor Devices and Integrated Technology and Shaanxi Joint Key Laboratory of Graphene, School of Microelectronics, Xidian University, Xi’an 710071, China
| | - Chunfu Zhang
- National Key Laboratory of Wide Bandgap Semiconductor Devices and Integrated Technology and Shaanxi Joint Key Laboratory of Graphene, School of Microelectronics, Xidian University, Xi’an 710071, China
- Xi’an Baoxin Solar Technology Co., Ltd., Xi’an 710071, China
| | - Yue Hao
- National Key Laboratory of Wide Bandgap Semiconductor Devices and Integrated Technology and Shaanxi Joint Key Laboratory of Graphene, School of Microelectronics, Xidian University, Xi’an 710071, China
| |
Collapse
|
21
|
Yeo D, Shin J, Kim D, Jaung JY, Jung IH. Self-Assembled Monolayer-Based Hole-Transporting Materials for Perovskite Solar Cells. NANOMATERIALS (BASEL, SWITZERLAND) 2024; 14:175. [PMID: 38251141 PMCID: PMC10818599 DOI: 10.3390/nano14020175] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/07/2023] [Revised: 01/06/2024] [Accepted: 01/10/2024] [Indexed: 01/23/2024]
Abstract
Ever since self-assembled monolayers (SAMs) were adopted as hole-transporting layers (HTL) for perovskite solar cells (PSCs), numerous SAMs for HTL have been synthesized and reported. SAMs offer several unique advantages including relatively simple synthesis, straightforward molecular engineering, effective surface modification using small amounts of molecules, and suitability for large-area device fabrication. In this review, we discuss recent developments of SAM-based hole-transporting materials (HTMs) for PSCs. Notably, in this article, SAM-based HTMs have been categorized by similarity of synthesis to provide general information for building a SAM structure. SAMs are composed of head, linker, and anchoring groups, and the selection of anchoring groups is key to design the synthetic procedure of SAM-based HTMs. In addition, the working mechanism of SAM-based HTMs has been visualized and explained to provide inspiration for finding new head and anchoring groups that have not yet been explored. Furthermore, both photovoltaic properties and device stabilities have been discussed and summarized, expanding reader's understanding of the relationship between the structure and performance of SAMs-based PSCs.
Collapse
Affiliation(s)
| | | | | | - Jae Yun Jaung
- Department of Organic and Nano Engineering, and Human-Tech Convergence Program, Hanyang University, 222, Wangsimni-ro, Seongdong-gu, Seoul 04763, Republic of Korea; (D.Y.); (J.S.); (D.K.)
| | - In Hwan Jung
- Department of Organic and Nano Engineering, and Human-Tech Convergence Program, Hanyang University, 222, Wangsimni-ro, Seongdong-gu, Seoul 04763, Republic of Korea; (D.Y.); (J.S.); (D.K.)
| |
Collapse
|
22
|
Rahman MM. A Comprehensive Review on Perovskite Solar Cells Integrated Photo-supercapacitors and Perovskites-Based Electrochemical Supercapacitors. CHEM REC 2024; 24:e202300183. [PMID: 37642262 DOI: 10.1002/tcr.202300183] [Citation(s) in RCA: 3] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/19/2023] [Revised: 08/17/2023] [Indexed: 08/31/2023]
Abstract
Perovskite solar cells (PSCs) have rapidly become a prevalent photovoltaic technology owing to their simple structure, low processing cost, and remarkable increase in solar-to-electric power conversion efficiency (PCE). However, the intermittent nature of solar radiation induces some technical and financial challenges for its practical applications as a reliable power source. To address this issue, the integration of PSCs with supercapacitors (SCs) in the form of integrated photo-supercapacitors (IPSs) has gathered significant attention. This integration can balance energy availability and demand, reduce energy wastage, and stabilize power output for portable and wearable electronics. Meanwhile, the excellent optoelectronic properties with mixed electronic and ionic conductivity of metal halide perovskites (MHPs) have expanded their application as electrode and electrolyte materials for SCs and photo-supercapacitors (PSs) applications. This review provides an all-inclusive summary of the current state-of-the-art research progress of PSCs-IPSs and MHPs-based SCs and PSs by highlighting their basics and integration approaches. It also discusses the challenges and prospects of these materials and technologies.
Collapse
Affiliation(s)
- Md Mahbubur Rahman
- Department of Applied Chemistry, Konkuk University, Chungju, 27478, South Korea
| |
Collapse
|
23
|
Li L, Chen P, Su R, Xu H, Li Q, Zhong Q, Yan H, Yang X, Hu J, Li S, Huang T, Xiao Y, Liu B, Ji Y, Wang D, Sun H, Guo X, Lu ZH, Snaith HJ, Gong Q, Zhao L, Zhu R. Buried-Metal-Grid Electrodes for Efficient Parallel-Connected Perovskite Solar Cells. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2024; 36:e2305238. [PMID: 37665975 DOI: 10.1002/adma.202305238] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/01/2023] [Revised: 08/24/2023] [Indexed: 09/06/2023]
Abstract
The limited conductivity of existing transparent conducting oxide (TCO) greatly restricts the further performance improvement of perovskite solar cells (PSCs), especially for large-area devices. Herein, buried-metal-grid tin-doped indium oxide (BMG ITO) electrodes are developed to minimize the power loss caused by the undesirable high sheet resistance of TCOs. By burying 140-nm-thick metal grids into ITO using a photolithography technique, the sheet resistance of ITO is reduced from 15.0 to 2.7 Ω sq-1 . The metal step of BMG over ITO has a huge impact on the charge carrier transport in PSCs. The PSCs using BMG ITO with a low metal step deliver power conversion efficiencies (PCEs) significantly better than that of their counterparts with higher metal steps. Moreover, compared with the pristine ITO-based PSCs, the BMG ITO-based PSCs show a smaller PCE decrease when scaling up the active area of devices. The parallel-connected large-area PSCs with an active area of 102.8 mm2 reach a PCE of 22.5%. The BMG ITO electrodes are also compatible with the fabrication of inverted-structure PSCs and organic solar cells. The work demonstrates the great efficacy of improving the conductivity of TCO by BMG and opens up a promising avenue for constructing highly efficient large-area PSCs.
Collapse
Affiliation(s)
- Lei Li
- State Key Laboratory for Artificial Microstructure and Mesoscopic Physics, School of Physics, Frontiers Science Center for Nano-optoelectronics & Collaborative Innovation Center of Quantum Matter, Peking University, Beijing, 100871, China
| | - Peng Chen
- State Key Laboratory for Artificial Microstructure and Mesoscopic Physics, School of Physics, Frontiers Science Center for Nano-optoelectronics & Collaborative Innovation Center of Quantum Matter, Peking University, Beijing, 100871, China
| | - Rui Su
- State Key Laboratory for Artificial Microstructure and Mesoscopic Physics, School of Physics, Frontiers Science Center for Nano-optoelectronics & Collaborative Innovation Center of Quantum Matter, Peking University, Beijing, 100871, China
| | - Hongyu Xu
- State Key Laboratory for Artificial Microstructure and Mesoscopic Physics, School of Physics, Frontiers Science Center for Nano-optoelectronics & Collaborative Innovation Center of Quantum Matter, Peking University, Beijing, 100871, China
| | - Qiuyang Li
- State Key Laboratory for Artificial Microstructure and Mesoscopic Physics, School of Physics, Frontiers Science Center for Nano-optoelectronics & Collaborative Innovation Center of Quantum Matter, Peking University, Beijing, 100871, China
| | - Qixuan Zhong
- State Key Laboratory for Artificial Microstructure and Mesoscopic Physics, School of Physics, Frontiers Science Center for Nano-optoelectronics & Collaborative Innovation Center of Quantum Matter, Peking University, Beijing, 100871, China
| | - Haoming Yan
- State Key Laboratory for Artificial Microstructure and Mesoscopic Physics, School of Physics, Frontiers Science Center for Nano-optoelectronics & Collaborative Innovation Center of Quantum Matter, Peking University, Beijing, 100871, China
| | - Xiaoyu Yang
- State Key Laboratory for Artificial Microstructure and Mesoscopic Physics, School of Physics, Frontiers Science Center for Nano-optoelectronics & Collaborative Innovation Center of Quantum Matter, Peking University, Beijing, 100871, China
| | - Juntao Hu
- Department of Physics, Center for Optoelectronics Engineering Research, Yunnan University, Kunming, 650091, China
| | - Shunde Li
- State Key Laboratory for Artificial Microstructure and Mesoscopic Physics, School of Physics, Frontiers Science Center for Nano-optoelectronics & Collaborative Innovation Center of Quantum Matter, Peking University, Beijing, 100871, China
| | - Tianyu Huang
- State Key Laboratory for Artificial Microstructure and Mesoscopic Physics, School of Physics, Frontiers Science Center for Nano-optoelectronics & Collaborative Innovation Center of Quantum Matter, Peking University, Beijing, 100871, China
| | - Yun Xiao
- Clarendon Laboratory, Department of Physics, University of Oxford, Oxford, OX1 3PU, UK
| | - Bin Liu
- Department of Materials Science and Engineering, Southern University of Science and Technology (SUSTech) Shenzhen, Guangdong, 518055, China
| | - Yongqiang Ji
- State Key Laboratory for Artificial Microstructure and Mesoscopic Physics, School of Physics, Frontiers Science Center for Nano-optoelectronics & Collaborative Innovation Center of Quantum Matter, Peking University, Beijing, 100871, China
| | - Dengke Wang
- Department of Physics, Center for Optoelectronics Engineering Research, Yunnan University, Kunming, 650091, China
| | - Huiliang Sun
- Center for Advanced Analytical Science, School of Chemistry and Chemical Engineering, Guangzhou University, Guangzhou, 510006, China
| | - Xugang Guo
- Department of Materials Science and Engineering, Southern University of Science and Technology (SUSTech) Shenzhen, Guangdong, 518055, China
| | - Zheng-Hong Lu
- Department of Physics, Center for Optoelectronics Engineering Research, Yunnan University, Kunming, 650091, China
- Department of Materials Science and Engineering, University of Toronto, Toronto, Ontario, M5G 3E4, Canada
| | - Henry J Snaith
- Clarendon Laboratory, Department of Physics, University of Oxford, Oxford, OX1 3PU, UK
| | - Qihuang Gong
- State Key Laboratory for Artificial Microstructure and Mesoscopic Physics, School of Physics, Frontiers Science Center for Nano-optoelectronics & Collaborative Innovation Center of Quantum Matter, Peking University, Beijing, 100871, China
- Peking University Yangtze Delta Institute of Optoelectronics, Nantong, Jiangsu, 226010, China
- Collaborative Innovation Center of Extreme Optics, Shanxi University, Taiyuan, Shanxi, 030006, China
| | - Lichen Zhao
- State Key Laboratory for Artificial Microstructure and Mesoscopic Physics, School of Physics, Frontiers Science Center for Nano-optoelectronics & Collaborative Innovation Center of Quantum Matter, Peking University, Beijing, 100871, China
| | - Rui Zhu
- State Key Laboratory for Artificial Microstructure and Mesoscopic Physics, School of Physics, Frontiers Science Center for Nano-optoelectronics & Collaborative Innovation Center of Quantum Matter, Peking University, Beijing, 100871, China
- Peking University Yangtze Delta Institute of Optoelectronics, Nantong, Jiangsu, 226010, China
- Collaborative Innovation Center of Extreme Optics, Shanxi University, Taiyuan, Shanxi, 030006, China
| |
Collapse
|
24
|
Zhang Y, Yu R, Li M, He Z, Dong Y, Xu Z, Wang R, Ma Z, Tan Z. Amphoteric Ion Bridged Buried Interface for Efficient and Stable Inverted Perovskite Solar Cells. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2024; 36:e2310203. [PMID: 37967552 DOI: 10.1002/adma.202310203] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/02/2023] [Revised: 10/30/2023] [Indexed: 11/17/2023]
Abstract
Synergistic morphology and defects management at the buried perovskite interface are challenging but crucial for the further improvement of inverted perovskite solar cells (PerSCs). Herein, an amphoteric organic salt, 2-(4-fluorophenyl)ethylammonium-4-methyl benzenesulfonate (4FPEAPSA), is designed to optimize the film morphology and energy level alignment at the perovskite buried interface. 4FPEAPSA treatment promotes the growth of a void-free, coarse-grained, and hydrophobic film by inducing the crystal orientation. Besides, the dual-functional 4FPEAPSA can chemically interact with the perovskite film, and passivate the defects of iodine and formamidine vacancies, tending to revert the fermi level of perovskite to its defect-free state. Meanwhile, the formation of a p-type doping buried interface can facilitate the interfacial charge extraction and transport of PerSCs for reduced carrier recombination loss. Consequently, 4FPEAPSA treatment improves the efficiency of the perovskite devices to 25.03% with better storage, heat, and humidity stability. This work contributes to strengthening the systematic understanding of the perovskite buried interface, providing a synergetic approach to realize precise morphology control, effective defect suppression, and energy level alignment for efficient PerSCs.
Collapse
Affiliation(s)
- Yuling Zhang
- Beijing Advanced Innovation Center for Soft Matter Science and Engineering, College of Materials Science and Engineering, Beijing University of Chemical Technology, Beijing, 100029, China
| | - Runnan Yu
- Beijing Advanced Innovation Center for Soft Matter Science and Engineering, College of Materials Science and Engineering, Beijing University of Chemical Technology, Beijing, 100029, China
| | - Minghua Li
- Beijing Advanced Innovation Center for Soft Matter Science and Engineering, College of Materials Science and Engineering, Beijing University of Chemical Technology, Beijing, 100029, China
| | - Zhangwei He
- Beijing Advanced Innovation Center for Soft Matter Science and Engineering, College of Materials Science and Engineering, Beijing University of Chemical Technology, Beijing, 100029, China
| | - Yiman Dong
- Beijing Advanced Innovation Center for Soft Matter Science and Engineering, College of Materials Science and Engineering, Beijing University of Chemical Technology, Beijing, 100029, China
| | - Zhiyang Xu
- Beijing Advanced Innovation Center for Soft Matter Science and Engineering, College of Materials Science and Engineering, Beijing University of Chemical Technology, Beijing, 100029, China
| | - Ruyue Wang
- Beijing Advanced Innovation Center for Soft Matter Science and Engineering, College of Materials Science and Engineering, Beijing University of Chemical Technology, Beijing, 100029, China
| | - Zongwen Ma
- Beijing Advanced Innovation Center for Soft Matter Science and Engineering, College of Materials Science and Engineering, Beijing University of Chemical Technology, Beijing, 100029, China
| | - Zhanao Tan
- Beijing Advanced Innovation Center for Soft Matter Science and Engineering, College of Materials Science and Engineering, Beijing University of Chemical Technology, Beijing, 100029, China
| |
Collapse
|
25
|
Marchant C, Williams RM. Perovskite/silicon tandem solar cells-compositions for improved stability and power conversion efficiency. Photochem Photobiol Sci 2024; 23:1-22. [PMID: 37991706 DOI: 10.1007/s43630-023-00500-7] [Citation(s) in RCA: 1] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/14/2023] [Accepted: 10/23/2023] [Indexed: 11/23/2023]
Abstract
Perovskite/Silicon Tandem Solar Cells (PSTSCs) represent an emerging opportunity to compete with industry-standard single junction crystalline silicon (c-Si) solar cells. The maximum power conversion efficiency (PCE) of single junction cells is set by the Shockley-Queisser (SQ) limit (33.7%). However, tandem cells can expand this value to ~ 45% by utilising two stacked solar cells to harvest the solar spectrum more efficiently. 33.9% PCE has already been achieved with PSTSCs. This perspective analyses recent advances in PSTSC technology, with an emphasis on optimal perovskite composition, the problem and mitigation of light-induced halide phase segregation, self-assembled hole transporting monolayers and additives that can improve and stabilise the perovskite. Top-performing compositions show three cationic components (Cs+, FA+, Pb2+) and three anionic (I-, Br-, Cl-) with a bandgap between 1.55 and 1.77 eV and a theoretical maximum of 1.73 eV (717 nm). Anionic additives such as (Br3)- and SCN- reduce trap states and segregation. 2D-perovskite grain boundary interfaces are created with cationic alkylammonium additives such as methyl-phenethylammonium (MPEA) and result in improved performance. 2-, 3- or 4-terminal devices with a (partly) textured silicon heterojunction (SHJ) bottom cell are ideal. An ultra-thin interfacial recombination layer (~ 5 nm) of indium tin oxide (ITO) or indium zinc oxide (IZO) containing a carbazole-based hole transporting self-assembled monolayer (Me-4PACz) is used for optimal 2-terminal tandem devices.
Collapse
Affiliation(s)
- Charles Marchant
- Molecular Photonics Group, Van't Hoff Institute for Molecular Sciences (HIMS), Universiteit Van Amsterdam, Science Park 904, 1098 XH, Amsterdam, Netherlands
| | - René M Williams
- Molecular Photonics Group, Van't Hoff Institute for Molecular Sciences (HIMS), Universiteit Van Amsterdam, Science Park 904, 1098 XH, Amsterdam, Netherlands.
| |
Collapse
|
26
|
Shui QJ, Shan S, Zhai YC, Aoyagi S, Izawa S, Huda M, Yu CY, Zuo L, Chen H, Lin HS, Matsuo Y. Evaporable Fullerene Indanones with Controlled Amorphous Morphology as Electron Transport Layers for Inverted Perovskite Solar Cells. J Am Chem Soc 2023; 145:27307-27315. [PMID: 38063310 DOI: 10.1021/jacs.3c07192] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/21/2023]
Abstract
Fullerenes are among the most commonly used electron-transporting materials (ETMs) in inverted perovskite solar cells (IPSCs). Although versatile functionalized fullerene derivatives have shown excellent performance in IPSCs, pristine [60]fullerene (C60) is still the most widely used in devices mainly because of its uniform morphology by thermal deposition. However, thermally evaporable fullerene derivatives have not yet been achieved. Herein, we developed a series of evaporable fullerene derivatives, referred to as fullerene indanones (FIDOs), affording IPSCs with high power conversion efficiency (PCE) and long-term storage stability. The FIDOs were designed with a unique architecture in which the fullerene moiety and a benzene ring moiety are linked via a five-membered carbon ring in benzene ring plane. This molecular arrangement affords exceptional thermal stability, allowing the FIDOs to withstand harsh thermal deposition conditions. Moreover, by manipulating the steric bulk of the functional groups, we could control the state of the organic film from crystalline to amorphous. Subsequently, we used FIDOs as an electron transport layer (ETL) in IPSCs. Thanks to the suitable energy level and dual-passivation effect of FIDOs compared with a reference ETL using C60, the device using FIDOs achieved an open-circuit voltage of 1.16 V and a fill factor of 0.77. As a result, the PCE reached 22.11%, which is superior to 20.45% of the best-performing reference device. Most importantly, the FIDO-based IPSC devices exhibited exceptional stability in comparison to the reference device due to the stability of the amorphous ETL films.
Collapse
Affiliation(s)
- Qing-Jun Shui
- Department of Chemical Systems Engineering, Graduate School of Engineering, Nagoya University, Furo-cho, Chikusa-ku, Nagoya 464-8603, Japan
| | - Shiqi Shan
- State Key Laboratory of Silicon and Advanced Semiconductor Materials, Department of Polymer Science and Engineering, Zhejiang University, Hangzhou 310027, P. R. China
| | - Yong-Chang Zhai
- Department of Chemical Systems Engineering, Graduate School of Engineering, Nagoya University, Furo-cho, Chikusa-ku, Nagoya 464-8603, Japan
| | - Shinobu Aoyagi
- Department of Information and Basic Science, Nagoya City University, Nagoya 467-8501, Japan
| | - Seiichiro Izawa
- Laboratory for Materials and Structures, Institute of Innovative Research, Tokyo Institute of Technology, Yokohama, Kanagawa 226-8503, Japan
| | - Miftakhul Huda
- Department of Chemical Systems Engineering, Graduate School of Engineering, Nagoya University, Furo-cho, Chikusa-ku, Nagoya 464-8603, Japan
| | - Chu-Yang Yu
- Department of Chemical Systems Engineering, Graduate School of Engineering, Nagoya University, Furo-cho, Chikusa-ku, Nagoya 464-8603, Japan
| | - Lijian Zuo
- State Key Laboratory of Silicon and Advanced Semiconductor Materials, Department of Polymer Science and Engineering, Zhejiang University, Hangzhou 310027, P. R. China
| | - Hongzheng Chen
- State Key Laboratory of Silicon and Advanced Semiconductor Materials, Department of Polymer Science and Engineering, Zhejiang University, Hangzhou 310027, P. R. China
| | - Hao-Sheng Lin
- Department of Chemical Systems Engineering, Graduate School of Engineering, Nagoya University, Furo-cho, Chikusa-ku, Nagoya 464-8603, Japan
| | - Yutaka Matsuo
- Department of Chemical Systems Engineering, Graduate School of Engineering, Nagoya University, Furo-cho, Chikusa-ku, Nagoya 464-8603, Japan
- Institute of Materials Innovation, Institutes for Future Society, Nagoya University, Furo-cho, Chikusa-ku, Nagoya 464-8603, Japan
| |
Collapse
|
27
|
Lee C, Chae K, Ko Y, Lee C, Kim T, Park S, Jung MY, Kim J, Yun YJ, Lee M, Jun Y. Phase Stability Improvement of a γ-CsPbI 3 Perovskite Solar Cell Utilizing a Barium Bis(trifluoromethanesulfonimide) Solution. ACS APPLIED MATERIALS & INTERFACES 2023; 15:51050-51058. [PMID: 37874850 DOI: 10.1021/acsami.3c10668] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 10/26/2023]
Abstract
The cesium lead iodide (CsPbI3) perovskite solar cell possesses a wide band gap ranging from 1.65 to 1.75 eV, which is suitable for integration into a tandem structure along with a low-band-gap silicon solar cell. Moreover, CsPbI3 has received considerable attention as a potential solution for the prevalent issues of low thermal stability of organic-inorganic perovskite solar cells and phase segregation encountered in conventional mixed halide wide-band-gap perovskite solar cells. Through the implementation of volatile additives, CsPbI3 has demonstrated substantial advancements in efficiency, process temperature, and stability. This study introduces a novel approach for barium (Ba)-doping by spraying an antisolvent containing barium bis(trifluoromethanesulfonimide) during the spin-coating process. By incorporating Ba2+ through this spraying technique, the formation of the delta phase in CsPbI3 is significantly suppressed; thereby, a power conversion efficiency of 18.56% is achieved, and a remarkable 93% of the initial efficiency is maintained after 600 h.
Collapse
Affiliation(s)
- Chanyong Lee
- Department of Energy Environment Policy and Technology, Graduate School of Energy and Environment (KU-KIST Green School), College of Engineering, Korea University, Seoul 02841, Republic of Korea
| | - Kyungjin Chae
- Department of Energy Environment Policy and Technology, Graduate School of Energy and Environment (KU-KIST Green School), College of Engineering, Korea University, Seoul 02841, Republic of Korea
| | - Yohan Ko
- Nano Electronic Materials and Components Research Centre, Gumi Electronics and Information Technology Research Institute (GERI), Gumi 39171, Republic of Korea
| | - Changhyun Lee
- Department of Energy Environment Policy and Technology, Graduate School of Energy and Environment (KU-KIST Green School), College of Engineering, Korea University, Seoul 02841, Republic of Korea
| | - Taemin Kim
- Department of Energy Environment Policy and Technology, Graduate School of Energy and Environment (KU-KIST Green School), College of Engineering, Korea University, Seoul 02841, Republic of Korea
| | - Seaeun Park
- Department of Energy Environment Policy and Technology, Graduate School of Energy and Environment (KU-KIST Green School), College of Engineering, Korea University, Seoul 02841, Republic of Korea
| | - Moo Young Jung
- Department of Energy Environment Policy and Technology, Graduate School of Energy and Environment (KU-KIST Green School), College of Engineering, Korea University, Seoul 02841, Republic of Korea
| | - Jinhyoung Kim
- Department of Energy Environment Policy and Technology, Graduate School of Energy and Environment (KU-KIST Green School), College of Engineering, Korea University, Seoul 02841, Republic of Korea
| | - Yong Ju Yun
- Department of Integrative Energy Engineering, Graduate School of Energy and Environment (KU-KIST Green School), College of Engineering, Korea University, Seoul 02841, Republic of Korea
| | - Minoh Lee
- Department of Energy Environment Policy and Technology, Graduate School of Energy and Environment (KU-KIST Green School), College of Engineering, Korea University, Seoul 02841, Republic of Korea
| | - Yongseok Jun
- Department of Energy Environment Policy and Technology, Graduate School of Energy and Environment (KU-KIST Green School), College of Engineering, Korea University, Seoul 02841, Republic of Korea
- Department of Integrative Energy Engineering, Graduate School of Energy and Environment (KU-KIST Green School), College of Engineering, Korea University, Seoul 02841, Republic of Korea
- Energy Materials Research Centre, Clean Energy Research Division, Korea Institute of Science and Technology (KIST), Seoul 02792, Republic of Korea
| |
Collapse
|
28
|
Wen J, Zhao Y, Wu P, Liu Y, Zheng X, Lin R, Wan S, Li K, Luo H, Tian Y, Li L, Tan H. Heterojunction formed via 3D-to-2D perovskite conversion for photostable wide-bandgap perovskite solar cells. Nat Commun 2023; 14:7118. [PMID: 37932289 PMCID: PMC10628126 DOI: 10.1038/s41467-023-43016-5] [Citation(s) in RCA: 2] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/19/2023] [Accepted: 10/28/2023] [Indexed: 11/08/2023] Open
Abstract
Light-induced halide segregation constrains the photovoltaic performance and stability of wide-bandgap perovskite solar cells and tandem cells. The implementation of an intermixed two-dimensional/three-dimensional heterostructure via solution post-treatment is a typical strategy to improve the efficiency and stability of perovskite solar cells. However, owing to the composition-dependent sensitivity of surface reconstruction, the conventional solution post-treatment is suboptimal for methylammonium-free and cesium/bromide-enriched wide-bandgap PSCs. To address this, we develop a generic three-dimensional to two-dimensional perovskite conversion approach to realize a preferential growth of wider dimensionality (n ≥ 2) atop wide-bandgap perovskite layers (1.78 eV). This technique involves depositing a well-defined MAPbI3 thin layer through a vapor-assisted two-step process, followed by its conversion into a two-dimensional structure. Such a two-dimensional/three-dimensional heterostructure enables suppressed light-induced halide segregation, reduced non-radiative interfacial recombination, and facilitated charge extraction. The wide-bandgap perovskite solar cells demonstrate a champion power conversion efficiency of 19.6% and an open-circuit voltage of 1.32 V. By integrating with the thermal-stable FAPb0.5Sn0.5I3 narrow-bandgap perovskites, our all-perovskite tandem solar cells exhibit a stabilized PCE of 28.1% and retain 90% of the initial performance after 855 hours of continuous 1-sun illumination.
Collapse
Affiliation(s)
- Jin Wen
- National Laboratory of Solid State Microstructures, Frontiers Science Center for Critical Earth Material Cycling, College of Engineering and Applied Sciences, Nanjing University, Nanjing, 210023, China
| | - Yicheng Zhao
- State Key Laboratory of Electronic Thin Films and Integrated Devices, School of Electronic Science and Engineering, University of Electronic Science and Technology of China, Chengdu, 610054, China
| | - Pu Wu
- National Laboratory of Solid State Microstructures, Frontiers Science Center for Critical Earth Material Cycling, College of Engineering and Applied Sciences, Nanjing University, Nanjing, 210023, China
| | - Yuxuan Liu
- National Laboratory of Solid State Microstructures, Frontiers Science Center for Critical Earth Material Cycling, College of Engineering and Applied Sciences, Nanjing University, Nanjing, 210023, China
| | - Xuntian Zheng
- National Laboratory of Solid State Microstructures, Frontiers Science Center for Critical Earth Material Cycling, College of Engineering and Applied Sciences, Nanjing University, Nanjing, 210023, China
| | - Renxing Lin
- National Laboratory of Solid State Microstructures, Frontiers Science Center for Critical Earth Material Cycling, College of Engineering and Applied Sciences, Nanjing University, Nanjing, 210023, China
| | - Sushu Wan
- School of Chemistry and Chemical Engineering, Nanjing University, Nanjing, 210023, China
| | - Ke Li
- School of Chemistry and Chemical Engineering, Nanjing University, Nanjing, 210023, China
| | - Haowen Luo
- National Laboratory of Solid State Microstructures, Frontiers Science Center for Critical Earth Material Cycling, College of Engineering and Applied Sciences, Nanjing University, Nanjing, 210023, China
| | - Yuxi Tian
- School of Chemistry and Chemical Engineering, Nanjing University, Nanjing, 210023, China
| | - Ludong Li
- National Laboratory of Solid State Microstructures, Frontiers Science Center for Critical Earth Material Cycling, College of Engineering and Applied Sciences, Nanjing University, Nanjing, 210023, China
| | - Hairen Tan
- National Laboratory of Solid State Microstructures, Frontiers Science Center for Critical Earth Material Cycling, College of Engineering and Applied Sciences, Nanjing University, Nanjing, 210023, China.
| |
Collapse
|
29
|
Magliano E, Mariani P, Agresti A, Pescetelli S, Matteocci F, Taheri B, Cricenti A, Luce M, Di Carlo A. Semitransparent Perovskite Solar Cells with Ultrathin Protective Buffer Layers. ACS APPLIED ENERGY MATERIALS 2023; 6:10340-10353. [PMID: 37886223 PMCID: PMC10598631 DOI: 10.1021/acsaem.3c00735] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 03/20/2023] [Accepted: 09/13/2023] [Indexed: 10/28/2023]
Abstract
Semitransparent perovskite solar cells (ST-PSCs) are increasingly important in a range of applications, including top cells in tandem devices and see-through photovoltaics. Transparent conductive oxides (TCOs) are commonly used as transparent electrodes, with sputtering being the preferred deposition method. However, this process can damage exposed layers, affecting the electrical performance of the devices. In this study, an indium tin oxide (ITO) deposition process that effectively suppresses sputtering damage was developed using a transition metal oxides (TMOs)-based buffer layer. An ultrathin (<10 nm) layer of evaporated vanadium oxide or molybdenum oxide was found to be effective in protecting against sputtering damage in ST-PSCs for tandem applications, as well as in thin perovskite-based devices for building-integrated photovoltaics. The identification of minimal parasitic absorption, the high work function and the analysis of oxygen vacancies denoted that the TMO layers are suitable for use in ST-PSCs. The highest fill factor (FF) achieved was 76%, and the efficiency (16.4%) was reduced by less than 10% when compared with the efficiency of gold-based PSCs. Moreover, up-scaling to 1 cm2-large area ST-PSCs with the buffer layer was successfully demonstrated with an FF of ∼70% and an efficiency of 15.7%. Comparing the two TMOs, the ST-PSC with an ultrathin V2Ox layer was slightly less efficient than that with MoOx, but its superior transmittance in the near infrared and greater light-soaking stability (a T80 of 600 h for V2Ox compared to a T80 of 12 h for MoOx) make V2Ox a promising buffer layer for preventing ITO sputtering damage in ST-PSCs.
Collapse
Affiliation(s)
- Erica Magliano
- C.H.O.S.E.
(Center for Hybrid and Organic Solar Energy), Electronic Engineering
Department, University of Rome Tor Vergata, Via del Politecnico 1, 00133, Rome, Italy
| | - Paolo Mariani
- C.H.O.S.E.
(Center for Hybrid and Organic Solar Energy), Electronic Engineering
Department, University of Rome Tor Vergata, Via del Politecnico 1, 00133, Rome, Italy
| | - Antonio Agresti
- C.H.O.S.E.
(Center for Hybrid and Organic Solar Energy), Electronic Engineering
Department, University of Rome Tor Vergata, Via del Politecnico 1, 00133, Rome, Italy
| | - Sara Pescetelli
- C.H.O.S.E.
(Center for Hybrid and Organic Solar Energy), Electronic Engineering
Department, University of Rome Tor Vergata, Via del Politecnico 1, 00133, Rome, Italy
| | - Fabio Matteocci
- C.H.O.S.E.
(Center for Hybrid and Organic Solar Energy), Electronic Engineering
Department, University of Rome Tor Vergata, Via del Politecnico 1, 00133, Rome, Italy
| | - Babak Taheri
- ENEA
- Centro Ricerche Frascati, Via Enrico Fermi, 45, 00044, Frascati, Rome, Italy
| | - Antonio Cricenti
- Istituto
di Struttura della Materia (CNR-ISM) National Research Council, via del Fosso del Cavaliere 100, 00133, Rome, Italy
| | - Marco Luce
- Istituto
di Struttura della Materia (CNR-ISM) National Research Council, via del Fosso del Cavaliere 100, 00133, Rome, Italy
| | - Aldo Di Carlo
- C.H.O.S.E.
(Center for Hybrid and Organic Solar Energy), Electronic Engineering
Department, University of Rome Tor Vergata, Via del Politecnico 1, 00133, Rome, Italy
- Istituto
di Struttura della Materia (CNR-ISM) National Research Council, via del Fosso del Cavaliere 100, 00133, Rome, Italy
| |
Collapse
|
30
|
Chai W, Li L, Zhu W, Chen D, Zhou L, Xi H, Zhang J, Zhang C, Hao Y. Graded Heterojunction Improves Wide-Bandgap Perovskite for Highly Efficient 4-Terminal Perovskite/Silicon Tandem Solar Cells. RESEARCH (WASHINGTON, D.C.) 2023; 6:0196. [PMID: 37465160 PMCID: PMC10351391 DOI: 10.34133/research.0196] [Citation(s) in RCA: 1] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 04/28/2023] [Accepted: 06/25/2023] [Indexed: 07/20/2023]
Abstract
Wide-bandgap (WBG) perovskite solar cells (PSCs) are essential for highly efficient and stable silicon/perovskite tandem solar cells. In this study, we adopted a synthetic strategy with lead thiocyanate (Pb(SCN)2) additive and methylammonium chloride (MACl) posttreatment to enhance the crystallinity and improve the interface of WBG perovskite films with a bandgap of 1.68 eV. The excessive PbI2 was formed at grain boundaries and converted into MAPbI3-xClx perovskites, which are utilized to form the graded heterojunction (GHJ) and compressive strain. This is beneficial for passivating nonradiative recombination defects, suppressing halide phase segregation, and facilitating carrier extraction. Subsequently, the device with GHJ delivered a champion efficiency of 20.30% and superior stability in ambient air and under 85 °C. Finally, we achieved a recorded efficiency of 30.91% for 4-terminal WBG perovskite/TOPCon tandem silicon solar cells. Our findings demonstrate a promising approach for fabricating efficient and stable WBG PSCs through the formation of GHJ.
Collapse
Affiliation(s)
- Wenming Chai
- State Key Discipline Laboratory of Wide Band Gap Semiconductor Technology & Shaanxi Joint Key Laboratory of Graphene, School of Microelectronics, Xidian University, Xi'an, Shaanxi 710071, China
| | - Lindong Li
- State Key Discipline Laboratory of Wide Band Gap Semiconductor Technology & Shaanxi Joint Key Laboratory of Graphene, School of Microelectronics, Xidian University, Xi'an, Shaanxi 710071, China
| | - Weidong Zhu
- State Key Discipline Laboratory of Wide Band Gap Semiconductor Technology & Shaanxi Joint Key Laboratory of Graphene, School of Microelectronics, Xidian University, Xi'an, Shaanxi 710071, China
- Xi'an Baoxin Solar Technology Co., Ltd., Xi'an, 710071, China
- State Key Discipline Laboratory of Wide Band Gap Semiconductor Technology & Shaanxi Joint Key Laboratory of Graphene, School of Microelectronics, Xidian University, Xi'an, Shaanxi 710071, China
| | - Dazheng Chen
- State Key Discipline Laboratory of Wide Band Gap Semiconductor Technology & Shaanxi Joint Key Laboratory of Graphene, School of Microelectronics, Xidian University, Xi'an, Shaanxi 710071, China
- Xi'an Baoxin Solar Technology Co., Ltd., Xi'an, 710071, China
| | - Long Zhou
- State Key Discipline Laboratory of Wide Band Gap Semiconductor Technology & Shaanxi Joint Key Laboratory of Graphene, School of Microelectronics, Xidian University, Xi'an, Shaanxi 710071, China
- Xi'an Baoxin Solar Technology Co., Ltd., Xi'an, 710071, China
| | - He Xi
- State Key Discipline Laboratory of Wide Band Gap Semiconductor Technology & Shaanxi Joint Key Laboratory of Graphene, School of Microelectronics, Xidian University, Xi'an, Shaanxi 710071, China
| | - Jincheng Zhang
- State Key Discipline Laboratory of Wide Band Gap Semiconductor Technology & Shaanxi Joint Key Laboratory of Graphene, School of Microelectronics, Xidian University, Xi'an, Shaanxi 710071, China
| | - Chunfu Zhang
- State Key Discipline Laboratory of Wide Band Gap Semiconductor Technology & Shaanxi Joint Key Laboratory of Graphene, School of Microelectronics, Xidian University, Xi'an, Shaanxi 710071, China
- Xi'an Baoxin Solar Technology Co., Ltd., Xi'an, 710071, China
- State Key Discipline Laboratory of Wide Band Gap Semiconductor Technology & Shaanxi Joint Key Laboratory of Graphene, School of Microelectronics, Xidian University, Xi'an, Shaanxi 710071, China
| | - Yue Hao
- State Key Discipline Laboratory of Wide Band Gap Semiconductor Technology & Shaanxi Joint Key Laboratory of Graphene, School of Microelectronics, Xidian University, Xi'an, Shaanxi 710071, China
| |
Collapse
|
31
|
Tan CS. Lead-free europium and ytterbium perovskites. RSC Adv 2023; 13:19013-19019. [PMID: 37362345 PMCID: PMC10285355 DOI: 10.1039/d3ra03110a] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/10/2023] [Accepted: 06/17/2023] [Indexed: 06/28/2023] Open
Abstract
Halide perovskite is a material with fantastic properties that could substantially impact next-generation optoelectronics. However, toxic Pb cations in the most excellent and stable perovskites have raised environmental concerns and hindered their commercialization. A new lead-free perovskite material needs to be discovered and address this issue. This research predicts that MAEuCl3 and MAYbCl3 are dynamic stable structures with wide band gap properties, making them promising lead-free perovskites. The study discusses these two new perovskites' XRD, electrical conductivity, and carrier mobility. Based on the properties of Eu2+ and Yb2+ perovskites, the iodide-based variant is suitable for device operation within the temperature range of 400 K to 600 K. The bromide-based perovskite is appropriate for temperatures ranging from 500 K to 700 K. In comparison, the chloride-based perovskite can be used for device operation in the higher temperature range of 800 K to 1100 K. Additionally, this research identifies the dynamic stability issue of lanthanide cations in halide perovskites, providing a reference for future lead-free perovskite applications.
Collapse
Affiliation(s)
- Chih Shan Tan
- Institute of Electronics, National Yang Ming Chiao Tung University Hsinchu 30010 Taiwan
| |
Collapse
|
32
|
Ašmontas S, Mujahid M. Recent Progress in Perovskite Tandem Solar Cells. NANOMATERIALS (BASEL, SWITZERLAND) 2023; 13:1886. [PMID: 37368318 DOI: 10.3390/nano13121886] [Citation(s) in RCA: 2] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/23/2023] [Revised: 06/12/2023] [Accepted: 06/14/2023] [Indexed: 06/28/2023]
Abstract
Tandem solar cells are widely considered the industry's next step in photovoltaics because of their excellent power conversion efficiency. Since halide perovskite absorber material was developed, it has been feasible to develop tandem solar cells that are more efficient. The European Solar Test Installation has verified a 32.5% efficiency for perovskite/silicon tandem solar cells. There has been an increase in the perovskite/Si tandem devices' power conversion efficiency, but it is still not as high as it might be. Their instability and difficulties in large-area realization are significant challenges in commercialization. In the first part of this overview, we set the stage by discussing the background of tandem solar cells and their development over time. Subsequently, a concise summary of recent advancements in perovskite tandem solar cells utilizing various device topologies is presented. In addition, we explore the many possible configurations of tandem module technology: the present work addresses the characteristics and efficacy of 2T monolithic and mechanically stacked four-terminal devices. Next, we explore ways to boost perovskite tandem solar cells' power conversion efficiencies. Recent advancements in the efficiency of tandem cells are described, along with the limitations that are still restricting their efficiency. Stability is also a significant hurdle in commercializing such devices, so we proposed eliminating ion migration as a cornerstone strategy for solving intrinsic instability problems.
Collapse
Affiliation(s)
- Steponas Ašmontas
- Center for Physical Sciences and Technology, Saulėtekio Ave. 3, LT-10257 Vilnius, Lithuania
| | - Muhammad Mujahid
- Center for Physical Sciences and Technology, Saulėtekio Ave. 3, LT-10257 Vilnius, Lithuania
| |
Collapse
|
33
|
Jiang R, Luan Y, Li J, Ye F, Zhang S, Su Z, Jin C, Tong G, Tong J, Huang F, Cheng YB, Bu T. Low-Cost Fabrication of Efficient Perovskite Photovoltaics Using Low-Purity Lead Iodide via Powder Engineering. ACS APPLIED MATERIALS & INTERFACES 2023; 15:20958-20965. [PMID: 37079481 DOI: 10.1021/acsami.3c00358] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/03/2023]
Abstract
Low cost is the eternal theme for any commercial production. Numerous efforts have been explored to realize low-cost, high-efficiency perovskite solar cells (PSCs), such as replacing the traditional spin-coating method with an economical printing strategy, simplifying the device structure, reducing the number of functional layers, etc. However, there are few reports on the use of low-cost precursors. Herein, we enable the low-cost fabrication of efficient PSCs based on a very cheaper low-purity PbI2 via powder engineering. The low-purity PbI2 is blended with formamidinium iodide followed by dissolving in a 2-methoxyethanol solvent, and then, the high-quality FAPbI3 powders are formed via an inverse temperature crystallization process and solvent washing after several simple processes to reduce the impurities. As a result, the devices fabricated using the as-synthesized black powders based on the low-purity PbI2 exhibit a champion power conversion efficiency (PCE) of 23.9% and retained ∼95% of the initial PCE after ∼400 h of storage in the conditions of 25 ± 5 °C and 25 ± 5 RH% without encapsulation. In addition, the upscaling fabrication of a 5 cm × 5 cm solar minimodule also demonstrates an impressive efficiency of 19.5%. Our findings demonstrate an economic strategy for the commercialization of PSCs from the perspective of low-cost production.
Collapse
Affiliation(s)
- Ruixuan Jiang
- State Key Laboratory of Advanced Technology for Materials Synthesis and Processing, Wuhan University of Technology, Wuhan, Hubei 430070, P.R. China
| | - Yuchen Luan
- State Key Laboratory of Advanced Technology for Materials Synthesis and Processing, Wuhan University of Technology, Wuhan, Hubei 430070, P.R. China
| | - Jing Li
- State Key Laboratory of Advanced Technology for Materials Synthesis and Processing, Wuhan University of Technology, Wuhan, Hubei 430070, P.R. China
| | - Feng Ye
- State Key Laboratory of Advanced Technology for Materials Synthesis and Processing, Wuhan University of Technology, Wuhan, Hubei 430070, P.R. China
| | - Shujie Zhang
- State Key Laboratory of Advanced Technology for Materials Synthesis and Processing, Wuhan University of Technology, Wuhan, Hubei 430070, P.R. China
| | - Zhiwei Su
- State Key Laboratory of Advanced Technology for Materials Synthesis and Processing, Wuhan University of Technology, Wuhan, Hubei 430070, P.R. China
| | - Chengkai Jin
- State Key Laboratory of Advanced Technology for Materials Synthesis and Processing, Wuhan University of Technology, Wuhan, Hubei 430070, P.R. China
| | - Guoqing Tong
- School of Materials Science and Engineering, Hefei University of Technology, Hefei 230009, P.R. China
| | - Jinhui Tong
- State Key Laboratory of Advanced Technology for Materials Synthesis and Processing, Wuhan University of Technology, Wuhan, Hubei 430070, P.R. China
| | - Fuzhi Huang
- State Key Laboratory of Advanced Technology for Materials Synthesis and Processing, Wuhan University of Technology, Wuhan, Hubei 430070, P.R. China
| | - Yi-Bing Cheng
- State Key Laboratory of Advanced Technology for Materials Synthesis and Processing, Wuhan University of Technology, Wuhan, Hubei 430070, P.R. China
- Xianhu Laboratory of the Advanced Energy Science and Technology Guangdong Laboratory, Foshan 528200, P.R. China
| | - Tongle Bu
- State Key Laboratory of Advanced Technology for Materials Synthesis and Processing, Wuhan University of Technology, Wuhan, Hubei 430070, P.R. China
| |
Collapse
|
34
|
Naikaew A, Krajangsang T, Srathongsian L, Seriwattanachai C, Sakata P, Burimart S, Sanglee K, Khotmungkhun K, Ruankham P, Romphosri S, Limmanee A, Kanjanaboos P. Photoexcitation of perovskite precursor solution to induce high-valent iodoplumbate species for wide bandgap perovskite solar cells with enhanced photocurrent. Sci Rep 2023; 13:6125. [PMID: 37059723 PMCID: PMC10104826 DOI: 10.1038/s41598-023-32468-w] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/08/2023] [Accepted: 03/28/2023] [Indexed: 04/16/2023] Open
Abstract
Solution-processed organic-inorganic hybrid perovskite solar cells are among the candidates to replace the traditional silicon solar cells due to their excellent power conversion efficiency (PCE). Despite this considerable progress, understanding the properties of the perovskite precursor solution is critical for perovskite solar cells (PSCs) to achieve high performance and reproducibility. However, the exploration of perovskite precursor chemistry and its effects on photovoltaic performances has been limited thus far. Herein, we modified the equilibrium of chemical species inside the precursor solution using different photoenergy and heat pathways to identify the corresponding perovskite film formation. The illuminated perovskite precursors exhibited a higher density of high-valent iodoplumbate species, resulting in the fabricated perovskite films with reduced defect density and uniform distribution. Conclusively, the perovskite solar cells prepared by the photoaged precursor solution had not only improved PCE but also enhanced current density, confirmed by device performance, conductive atomic force microscopy (C-AFM), and external quantum efficiency (EQE). This innovative precursor photoexcitation is a simple and effective physical process for boosting perovskite morphology and current density.
Collapse
Affiliation(s)
- Atittaya Naikaew
- National Energy Technology Center (ENTEC), National Science and Technology Development Agency, Pathum Thani, 12120, Thailand
- School of Materials Science and Innovation, Faculty of Science, Mahidol University, Nakhon Pathom, 73170, Thailand
| | - Taweewat Krajangsang
- National Energy Technology Center (ENTEC), National Science and Technology Development Agency, Pathum Thani, 12120, Thailand
| | - Ladda Srathongsian
- School of Materials Science and Innovation, Faculty of Science, Mahidol University, Nakhon Pathom, 73170, Thailand
| | - Chaowaphat Seriwattanachai
- School of Materials Science and Innovation, Faculty of Science, Mahidol University, Nakhon Pathom, 73170, Thailand
| | - Patawee Sakata
- School of Materials Science and Innovation, Faculty of Science, Mahidol University, Nakhon Pathom, 73170, Thailand
| | - Supavudh Burimart
- School of Materials Science and Innovation, Faculty of Science, Mahidol University, Nakhon Pathom, 73170, Thailand
| | - Kanyanee Sanglee
- National Energy Technology Center (ENTEC), National Science and Technology Development Agency, Pathum Thani, 12120, Thailand
| | - Kittikhun Khotmungkhun
- School of Materials Science and Innovation, Faculty of Science, Mahidol University, Nakhon Pathom, 73170, Thailand
| | - Pipat Ruankham
- Department of Physics and Materials Science, Faculty of Science, Chiang Mai University, Chiang Mai, 50200, Thailand
| | - Suwat Romphosri
- School of Materials Science and Innovation, Faculty of Science, Mahidol University, Nakhon Pathom, 73170, Thailand
| | - Amornrat Limmanee
- National Energy Technology Center (ENTEC), National Science and Technology Development Agency, Pathum Thani, 12120, Thailand
| | - Pongsakorn Kanjanaboos
- School of Materials Science and Innovation, Faculty of Science, Mahidol University, Nakhon Pathom, 73170, Thailand.
- Center of Excellence for Innovation in Chemistry (PERCH-CIC), Ministry of Higher Education, Science, Research and Innovation, Bangkok, 10400, Thailand.
| |
Collapse
|
35
|
Xie YM, Yao Q, Yip HL, Cao Y. Influence of Component Properties on the Photovoltaic Performance of Monolithic Perovskite/Organic Tandem Solar Cells: Sub-Cell, Interconnecting Layer, and Photovoltaic Parameters. SMALL METHODS 2023; 7:e2201255. [PMID: 36782077 DOI: 10.1002/smtd.202201255] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 09/29/2022] [Revised: 01/09/2023] [Indexed: 06/18/2023]
Abstract
Wide-bandgap perovskite sub-cells (WPSCs)-based tandem solar cells attract considerable interest because of their capability to surpass the Shockley-Queisser limit. Monolithic perovskite/organic tandem solar cells (POTSCs) integrating WPSCs and small-bandgap organic sub-cells (SOSCs) are famous compositions owing to their simple fabrication method and compatibility with flexible devices. Most studies on POTSCs focus on enhancing device efficiency by modifying one or two of the device components (WPSCs, SOSCs, and interconnecting layers). The characteristics of POTSCs are not extensively investigated so far, especially in terms of the influence of the device structure and component properties on the tandem device photovoltaic performance. In this study, the existing p-i-n type WPSC-based p-i-n POTSCs and n-i-p type WPSC-based n-i-p POTSCs are reviewed and their advantages and limitations are highlighted. Furthermore, the influence of the tandem device component properties (optical, electrical, and photovoltaic properties) on the photovoltaic parameters (open-circuit voltage, short-circuit current density, fill factor, and power conversion efficiency) and the existing device modification methods are discussed to provide comprehensive guidance for the development of POTSCs.
Collapse
Affiliation(s)
- Yue-Min Xie
- Institute of Functional Nano & Soft Materials (FUNSOM), Joint International Research Laboratory of Carbon-Based Functional Materials and Devices, Soochow University, Suzhou, 215123, P. R. China
- Jiangsu Key Laboratory of Advanced Negative Carbon Technologies, Soochow University, Suzhou, 215123, P. R. China
- Institute of Polymer Optoelectronic Materials and Devices, State Key Laboratory of Luminescent Materials and Devices, South China University of Technology, Guangzhou, 510640, P. R. China
| | - Qin Yao
- Institute of Polymer Optoelectronic Materials and Devices, State Key Laboratory of Luminescent Materials and Devices, South China University of Technology, Guangzhou, 510640, P. R. China
| | - Hin-Lap Yip
- Institute of Polymer Optoelectronic Materials and Devices, State Key Laboratory of Luminescent Materials and Devices, South China University of Technology, Guangzhou, 510640, P. R. China
- Department of Materials Science and Engineering, City University of Hong Kong, Kowloon, 999077, Hong Kong
- School of Energy and Environmental Science, City University of Hong Kong, Kowloon, 999077, Hong Kong
- Hong Kong Institute for Clean Energy, City University of Hong Kong, Kowloon, 999077, Hong Kong
| | - Yong Cao
- Institute of Polymer Optoelectronic Materials and Devices, State Key Laboratory of Luminescent Materials and Devices, South China University of Technology, Guangzhou, 510640, P. R. China
| |
Collapse
|
36
|
Nie T, Fang Z, Ren X, Duan Y, Liu SF. Recent Advances in Wide-Bandgap Organic-Inorganic Halide Perovskite Solar Cells and Tandem Application. NANO-MICRO LETTERS 2023; 15:70. [PMID: 36943501 PMCID: PMC10030759 DOI: 10.1007/s40820-023-01040-6] [Citation(s) in RCA: 5] [Impact Index Per Article: 5.0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 12/03/2022] [Accepted: 01/28/2023] [Indexed: 06/18/2023]
Abstract
Perovskite-based tandem solar cells have attracted increasing interest because of its great potential to surpass the Shockley-Queisser limit set for single-junction solar cells. In the tandem architectures, the wide-bandgap (WBG) perovskites act as the front absorber to offer higher open-circuit voltage (VOC) for reduced thermalization losses. Taking advantage of tunable bandgap of the perovskite materials, the WBG perovskites can be easily obtained by substituting halide iodine with bromine, and substituting organic ions FA and MA with Cs. To date, the most concerned issues for the WBG perovskite solar cells (PSCs) are huge VOC deficit and severe photo-induced phase separation. Reducing VOC loss and improving photostability of the WBG PSCs are crucial for further efficiency breakthrough. Recently, scientists have made great efforts to overcome these key issues with tremendous progresses. In this review, we first summarize the recent progress of WBG perovskites from the aspects of compositions, additives, charge transport layers, interfaces and preparation methods. The key factors affecting efficiency and stability are then carefully discussed, which would provide decent guidance to develop highly efficient and stable WBG PSCs for tandem application.
Collapse
Affiliation(s)
- Ting Nie
- Key Laboratory of Applied Surface and Colloid Chemistry, Ministry of Education, Shaanxi Key Laboratory for Advanced Energy Devices, Shaanxi Engineering Lab for Advanced Energy Technology, School of Materials Science and Engineering, Shaanxi Normal University, Xi'an, 710119, China
| | - Zhimin Fang
- Key Laboratory of Applied Surface and Colloid Chemistry, Ministry of Education, Shaanxi Key Laboratory for Advanced Energy Devices, Shaanxi Engineering Lab for Advanced Energy Technology, School of Materials Science and Engineering, Shaanxi Normal University, Xi'an, 710119, China.
| | - Xiaodong Ren
- Key Laboratory of Applied Surface and Colloid Chemistry, Ministry of Education, Shaanxi Key Laboratory for Advanced Energy Devices, Shaanxi Engineering Lab for Advanced Energy Technology, School of Materials Science and Engineering, Shaanxi Normal University, Xi'an, 710119, China
| | - Yuwei Duan
- Key Laboratory of Applied Surface and Colloid Chemistry, Ministry of Education, Shaanxi Key Laboratory for Advanced Energy Devices, Shaanxi Engineering Lab for Advanced Energy Technology, School of Materials Science and Engineering, Shaanxi Normal University, Xi'an, 710119, China
| | - Shengzhong Frank Liu
- Key Laboratory of Applied Surface and Colloid Chemistry, Ministry of Education, Shaanxi Key Laboratory for Advanced Energy Devices, Shaanxi Engineering Lab for Advanced Energy Technology, School of Materials Science and Engineering, Shaanxi Normal University, Xi'an, 710119, China.
- Dalian National Laboratory for Clean Energy, iChEM, Dalian Institute of Chemical Physics, Chinese Academy of Sciences, Dalian, 116023, China.
| |
Collapse
|
37
|
Patil P, Sangale SS, Kwon SN, Na SI. Innovative Approaches to Semi-Transparent Perovskite Solar Cells. NANOMATERIALS (BASEL, SWITZERLAND) 2023; 13:1084. [PMID: 36985978 PMCID: PMC10057987 DOI: 10.3390/nano13061084] [Citation(s) in RCA: 2] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 02/24/2023] [Revised: 03/12/2023] [Accepted: 03/13/2023] [Indexed: 06/18/2023]
Abstract
Perovskite solar cells (PSCs) are advancing rapidly and have reached a performance comparable to that of silicon solar cells. Recently, they have been expanding into a variety of applications based on the excellent photoelectric properties of perovskite. Semi-transparent PSCs (ST-PSCs) are one promising application that utilizes the tunable transmittance of perovskite photoactive layers, which can be used in tandem solar cells (TSC) and building-integrated photovoltaics (BIPV). However, the inverse relationship between light transmittance and efficiency is a challenge in the development of ST-PSCs. To overcome these challenges, numerous studies are underway, including those on band-gap tuning, high-performance charge transport layers and electrodes, and creating island-shaped microstructures. This review provides a general and concise summary of the innovative approaches in ST-PSCs, including advances in the perovskite photoactive layer, transparent electrodes, device structures and their applications in TSC and BIPV. Furthermore, the essential requirements and challenges to be addressed to realize ST-PSCs are discussed, and the prospects of ST-PSCs are presented.
Collapse
Affiliation(s)
| | | | - Sung-Nam Kwon
- Correspondence: (S.-N.K.); (S.-I.N.); Tel.: +82-63-270-4465 (S.-I.N.); Fax: +82-63-270-2341 (S.-I.N.)
| | - Seok-In Na
- Correspondence: (S.-N.K.); (S.-I.N.); Tel.: +82-63-270-4465 (S.-I.N.); Fax: +82-63-270-2341 (S.-I.N.)
| |
Collapse
|
38
|
Xiao Y, Cui X, Xiang B, Chen Y, Zhao C, Wang L, Yang C, Zhang G, Xie C, Han Y, Qiu M, Li S, You P. MDACl 2-Modified SnO 2 Film for Efficient Planar Perovskite Solar Cells. Molecules 2023; 28:2668. [PMID: 36985640 PMCID: PMC10056177 DOI: 10.3390/molecules28062668] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/26/2023] [Revised: 03/13/2023] [Accepted: 03/14/2023] [Indexed: 03/17/2023] Open
Abstract
The electron transport layer (ETL) with excellent charge extraction and transport ability is one of the key components of high-performance perovskite solar cells (PSCs). SnO2 has been considered as a more promising ETL for the future commercialization of PSCs due to its excellent photoelectric properties and easy processing. Herein, we propose a facile and effective ETL modification strategy based on the incorporation of methylenediammonium dichloride (MDACl2) into the SnO2 precursor colloidal solution. The effects of MDACl2 incorporation on charge transport, defect passivation, perovskite crystallization, and PSC performance are systematically investigated. First, the surface defects of the SnO2 film are effectively passivated, resulting in the increased conductivity of the SnO2 film, which is conducive to electron extraction and transport. Second, the MDACl2 modification contributes to the formation of high-quality perovskite films with improved crystallinity and reduced defect density. Furthermore, a more suitable energy level alignment is achieved at the ETL/perovskite interface, which facilitates the charge transport due to the lower energy barrier. Consequently, the MDACl2-modified PSCs exhibit a champion efficiency of 22.30% compared with 19.62% of the control device, and the device stability is also significantly improved.
Collapse
Affiliation(s)
| | | | | | | | | | | | | | | | | | | | - Mingxia Qiu
- College of New Materials and New Energies, Shenzhen Technology University, Shenzhen 518118, China
| | - Shunpu Li
- College of New Materials and New Energies, Shenzhen Technology University, Shenzhen 518118, China
| | - Peng You
- College of New Materials and New Energies, Shenzhen Technology University, Shenzhen 518118, China
| |
Collapse
|
39
|
Fan E, Liu M, Yang K, Jiang S, Li B, Zhao D, Guo Y, Zhang Y, Zhang P, Zuo C, Ding L, Zheng Z. One-Step Gas-Solid-Phase Diffusion-Induced Elemental Reaction for Bandgap-Tunable Cu aAg m1Bi m2I n/CuI Thin Film Solar Cells. NANO-MICRO LETTERS 2023; 15:58. [PMID: 36862313 PMCID: PMC9981855 DOI: 10.1007/s40820-023-01033-5] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 11/30/2022] [Accepted: 01/31/2023] [Indexed: 06/18/2023]
Abstract
Lead-free inorganic copper-silver-bismuth-halide materials have attracted more and more attention due to their environmental friendliness, high element abundance, and low cost. Here, we developed a strategy of one-step gas-solid-phase diffusion-induced reaction to fabricate a series of bandgap-tunable CuaAgm1Bim2In/CuI bilayer films due to the atomic diffusion effect for the first time. By designing and regulating the sputtered Cu/Ag/Bi metal film thickness, the bandgap of CuaAgm1Bim2In could be reduced from 2.06 to 1.78 eV. Solar cells with the structure of FTO/TiO2/CuaAgm1Bim2In/CuI/carbon were constructed, yielding a champion power conversion efficiency of 2.76%, which is the highest reported for this class of materials owing to the bandgap reduction and the peculiar bilayer structure. The current work provides a practical path for developing the next generation of efficient, stable, and environmentally friendly photovoltaic materials.
Collapse
Affiliation(s)
- Erchuang Fan
- Key Laboratory of Micro-Nano Materials for Energy Storage and Conversion of Henan Province, College of Chemical and Materials Engineering, Institute of Surface Micro and Nano Materials, Xuchang University, Xuchang, 461000, People's Republic of China
- School of Materials Science and Engineering, Zhengzhou University, Zhengzhou, 450001, People's Republic of China
| | - Manying Liu
- Key Laboratory of Micro-Nano Materials for Energy Storage and Conversion of Henan Province, College of Chemical and Materials Engineering, Institute of Surface Micro and Nano Materials, Xuchang University, Xuchang, 461000, People's Republic of China.
| | - Kangni Yang
- Key Laboratory of Micro-Nano Materials for Energy Storage and Conversion of Henan Province, College of Chemical and Materials Engineering, Institute of Surface Micro and Nano Materials, Xuchang University, Xuchang, 461000, People's Republic of China
| | - Siyu Jiang
- Key Laboratory of Micro-Nano Materials for Energy Storage and Conversion of Henan Province, College of Chemical and Materials Engineering, Institute of Surface Micro and Nano Materials, Xuchang University, Xuchang, 461000, People's Republic of China
- School of Materials Science and Engineering, Zhengzhou University, Zhengzhou, 450001, People's Republic of China
| | - Bingxin Li
- Key Laboratory of Micro-Nano Materials for Energy Storage and Conversion of Henan Province, College of Chemical and Materials Engineering, Institute of Surface Micro and Nano Materials, Xuchang University, Xuchang, 461000, People's Republic of China
| | - Dandan Zhao
- Key Laboratory of Micro-Nano Materials for Energy Storage and Conversion of Henan Province, College of Chemical and Materials Engineering, Institute of Surface Micro and Nano Materials, Xuchang University, Xuchang, 461000, People's Republic of China
| | - Yanru Guo
- Key Laboratory of Micro-Nano Materials for Energy Storage and Conversion of Henan Province, College of Chemical and Materials Engineering, Institute of Surface Micro and Nano Materials, Xuchang University, Xuchang, 461000, People's Republic of China
| | - Yange Zhang
- Key Laboratory of Micro-Nano Materials for Energy Storage and Conversion of Henan Province, College of Chemical and Materials Engineering, Institute of Surface Micro and Nano Materials, Xuchang University, Xuchang, 461000, People's Republic of China
| | - Peng Zhang
- School of Materials Science and Engineering, Zhengzhou University, Zhengzhou, 450001, People's Republic of China
| | - Chuantian Zuo
- Center for Excellence in Nanoscience (CAS), Key Laboratory of Nanosystem and Hierarchical Fabrication (CAS), National Center for Nanoscience and Technology, Beijing, 100190, People's Republic of China
| | - Liming Ding
- Center for Excellence in Nanoscience (CAS), Key Laboratory of Nanosystem and Hierarchical Fabrication (CAS), National Center for Nanoscience and Technology, Beijing, 100190, People's Republic of China.
| | - Zhi Zheng
- Key Laboratory of Micro-Nano Materials for Energy Storage and Conversion of Henan Province, College of Chemical and Materials Engineering, Institute of Surface Micro and Nano Materials, Xuchang University, Xuchang, 461000, People's Republic of China.
- School of Materials Science and Engineering, Zhengzhou University, Zhengzhou, 450001, People's Republic of China.
| |
Collapse
|
40
|
Wu H, Cheng Y, Ma J, Zhang J, Zhang Y, Song Y, Peng S. Pivotal Routes for Maximizing Semitransparent Perovskite Solar Cell Performance: Photon Propagation Management and Carrier Kinetics Regulation. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2023; 35:e2206574. [PMID: 36056776 DOI: 10.1002/adma.202206574] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/19/2022] [Indexed: 06/15/2023]
Abstract
Semitransparent perovskite solar cells (ST-PSCs) are ideal candidates for building-integrated photovoltaics (BIPV) and tandem solar cells (TSCs) owing to their tunable bandgap and high visible transparency. The best power conversion efficiency (PCE) of ST-PSCs is close to 15% with an average visible transmittance of over 20%, which still lags far behind the PCE of normal opaque PSCs. This can be attributed to the poor light utilization efficiency (LUE) of ST-PSCs. Herein, the pivotal routes for maximizing LUE of ST-PSCs in terms of photon propagation management and carrier kinetics regulation are systematically rationalized. First, the fundamental theoretical analyses on optical processes and electronic properties are provided. Then, insights on photon propagation management measures and carrier kinetics regulation strategies are provided. Furthermore, a summary of the promising commercial application of ST-PSCs in BIPV and TSCs is provided. Finally, the main progress of ST-PSCs is briefly summarized, and the directions for the commercialization of ST-PSCs are proposed.
Collapse
Affiliation(s)
- Hangjuan Wu
- School of Materials Science and Engineering, College of Chemistry, Henan Institute of Advanced Technology, Zhengzhou University, Zhengzhou, 450001, P. R. China
| | - Yajie Cheng
- School of Materials Science and Engineering, College of Chemistry, Henan Institute of Advanced Technology, Zhengzhou University, Zhengzhou, 450001, P. R. China
| | - Junjie Ma
- School of Materials Science and Engineering, College of Chemistry, Henan Institute of Advanced Technology, Zhengzhou University, Zhengzhou, 450001, P. R. China
| | - Jiahao Zhang
- School of Materials Science and Engineering, College of Chemistry, Henan Institute of Advanced Technology, Zhengzhou University, Zhengzhou, 450001, P. R. China
| | - Yiqiang Zhang
- School of Materials Science and Engineering, College of Chemistry, Henan Institute of Advanced Technology, Zhengzhou University, Zhengzhou, 450001, P. R. China
| | - Yanlin Song
- Key Laboratory of Green Printing, Institute of Chemistry, Chinese Academy of Sciences (ICCAS), Beijing Engineering Research Center of Nanomaterials for Green Printing Technology, National Laboratory for Molecular Sciences (BNLMS), Beijing, 100190, P. R. China
| | - Shou Peng
- China National Building Material Group Co., Ltd., Beijing, 100036, P. R. China
- State Key Laboratory of Advanced Technology for Float Glass, Bengbu, 233000, P. R. China
| |
Collapse
|
41
|
Liu Y, Banon JP, Frohna K, Chiang YH, Tumen-Ulzii G, Stranks SD, Filoche M, Friend RH. The Electronic Disorder Landscape of Mixed Halide Perovskites. ACS ENERGY LETTERS 2023; 8:250-258. [PMID: 36660372 PMCID: PMC9841609 DOI: 10.1021/acsenergylett.2c02352] [Citation(s) in RCA: 3] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/17/2022] [Accepted: 11/23/2022] [Indexed: 05/13/2023]
Abstract
Band gap tunability of lead mixed halide perovskites makes them promising candidates for various applications in optoelectronics. Here we use the localization landscape theory to reveal that the static disorder due to iodide:bromide compositional alloying contributes at most 3 meV to the Urbach energy. Our modeling reveals that the reason for this small contribution is due to the small effective masses in perovskites, resulting in a natural length scale of around 20 nm for the "effective confining potential" for electrons and holes, with short-range potential fluctuations smoothed out. The increase in Urbach energy across the compositional range agrees well with our optical absorption measurements. We model systems of sizes up to 80 nm in three dimensions, allowing us to accurately reproduce the experimentally observed absorption spectra of perovskites with halide segregation. Our results suggest that we should look beyond static contribution and focus on the dynamic temperature dependent contribution to the Urbach energy.
Collapse
Affiliation(s)
- Yun Liu
- Cavendish
Laboratory, University of Cambridge, CambridgeCB3 0HE, United Kingdom
| | - Jean-Philippe Banon
- Laboratoire
de Physique de la Matière Condensée, CNRS, École Polytechnique, Institut Polytechnique
de Paris, 91120Palaiseau, France
| | - Kyle Frohna
- Cavendish
Laboratory, University of Cambridge, CambridgeCB3 0HE, United Kingdom
| | - Yu-Hsien Chiang
- Cavendish
Laboratory, University of Cambridge, CambridgeCB3 0HE, United Kingdom
| | - Ganbaatar Tumen-Ulzii
- Department
of Chemical Engineering & Biotechnology, University of Cambridge, CambridgeCB3 0AS, United Kingdom
| | - Samuel D. Stranks
- Cavendish
Laboratory, University of Cambridge, CambridgeCB3 0HE, United Kingdom
- Department
of Chemical Engineering & Biotechnology, University of Cambridge, CambridgeCB3 0AS, United Kingdom
| | - Marcel Filoche
- Laboratoire
de Physique de la Matière Condensée, CNRS, École Polytechnique, Institut Polytechnique
de Paris, 91120Palaiseau, France
- Institut
Langevin, ESPCI Paris, Université
PSL, CNRS, 75005Paris, France
| | - Richard H. Friend
- Cavendish
Laboratory, University of Cambridge, CambridgeCB3 0HE, United Kingdom
| |
Collapse
|
42
|
Wang C, Gao P. ‘Radicalize’ the Performance of Perovskite Solar Cells with Radical Compounds. Chem Res Chin Univ 2023. [DOI: 10.1007/s40242-023-2327-7] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/14/2023]
|
43
|
Guan N, Zhang Y, Chen W, Jiang Z, Gu L, Zhu R, Yadav D, Li D, Xu B, Cao L, Gao X, Chen Y, Song L. Deciphering the Morphology Change and Performance Enhancement for Perovskite Solar Cells Induced by Surface Modification. ADVANCED SCIENCE (WEINHEIM, BADEN-WURTTEMBERG, GERMANY) 2023; 10:e2205342. [PMID: 36453563 PMCID: PMC9875650 DOI: 10.1002/advs.202205342] [Citation(s) in RCA: 1] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 09/15/2022] [Revised: 11/15/2022] [Indexed: 05/27/2023]
Abstract
Organic-inorganic perovskite solar cells (PSCs) have achieved great attention due to their expressive power conversion efficiency (PCE) up to 25.7%. To improve the photovoltaic performance of PSCs, interface engineering between the perovskite and hole transport layer (HTL) is a widely used strategy. Following this concept, benzyl trimethyl ammonium chlorides (BTACls) are used to modify the wet chemical processed perovskite film in this work. The BTACl-induced low dimensional perovskite is found to have a bilayer structure, which efficiently decreases the trap density and improves the energy level alignment at the perovskite/HTL interface. As a result, the BTACl-modified PSCs show an improved PCE compared to the control devices. From device modeling, the reduced charge carrier recombination and promoted charge carrier transfer at the perovskite/HTL interface are the cause of the open-circuit (Voc ) and fill factor (FF) improvement, respectively. This study gives a deep understanding for surface modification of perovskite films from a perspective of the morphology and the function of enhancing photovoltaic performance.
Collapse
Affiliation(s)
- Nianci Guan
- Frontiers Science Center for Flexible ElectronicsInstitute of Flexible Electronics (IFE)Northwestern Polytechnical University (NPU)Xi'an710072P. R. China
| | - Yuezhou Zhang
- Frontiers Science Center for Flexible ElectronicsInstitute of Flexible Electronics (IFE)Northwestern Polytechnical University (NPU)Xi'an710072P. R. China
| | - Wei Chen
- Shenzhen Key Laboratory of Ultraintense Laser and Advanced Material Technology, Center for Advanced Material Diagnostic Technology, and College of EngineeringPhysicsShenzhen Technology University (SZTU)Lantian Road 3002Shenzhen518118China
| | - Zhengyan Jiang
- Department of Materials Science and EngineeringSouthern University of Science and TechnologyShenzhen518055China
| | - Lei Gu
- Frontiers Science Center for Flexible ElectronicsInstitute of Flexible Electronics (IFE)Northwestern Polytechnical University (NPU)Xi'an710072P. R. China
| | - Ruixue Zhu
- Frontiers Science Center for Flexible ElectronicsInstitute of Flexible Electronics (IFE)Northwestern Polytechnical University (NPU)Xi'an710072P. R. China
| | - Deependra Yadav
- Frontiers Science Center for Flexible ElectronicsInstitute of Flexible Electronics (IFE)Northwestern Polytechnical University (NPU)Xi'an710072P. R. China
- Pharmaceutical Sciences LaboratoryFaculty of Science and EngineeringÅbo Akademi UniversityTurkuFI‐00520Finland
| | - Deli Li
- Fujian Cross Strait Institute of Flexible Electronics (Future Technologies)Fujian Normal UniversityFuzhou350117China
| | - Baomin Xu
- Department of Materials Science and EngineeringSouthern University of Science and TechnologyShenzhen518055China
| | - Leifeng Cao
- Shenzhen Key Laboratory of Ultraintense Laser and Advanced Material Technology, Center for Advanced Material Diagnostic Technology, and College of EngineeringPhysicsShenzhen Technology University (SZTU)Lantian Road 3002Shenzhen518118China
| | - Xingyu Gao
- Country Shanghai Synchrotron Radiation Facility (SSRF)Zhangjiang LabShanghai Advanced Research InstituteChinese Academy of SciencesShanghai201204China
| | - Yonghua Chen
- Key Laboratory of Flexible Electronics (KLOFE) and Institute of Advanced Materials (IAM)Jiangsu National Synergistic Innovation Center for Advanced Materials (SICAM)Nanjing Tech University (NanjingTech)30 South Puzhu RoadNanjingJiangsu211816China
| | - Lin Song
- Frontiers Science Center for Flexible ElectronicsInstitute of Flexible Electronics (IFE)Northwestern Polytechnical University (NPU)Xi'an710072P. R. China
| |
Collapse
|
44
|
Moseley OI, Roose B, Zelewski SJ, Kahmann S, Dey K, Stranks SD. Tunable Multiband Halide Perovskite Tandem Photodetectors with Switchable Response. ACS PHOTONICS 2022; 9:3958-3966. [PMID: 36573164 PMCID: PMC9782784 DOI: 10.1021/acsphotonics.2c01328] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 08/26/2022] [Indexed: 06/17/2023]
Abstract
Photodetectors with multiple spectral response bands have shown promise to improve imaging and communications through the switchable detection of different photon energies. However, demonstrations to date have been limited to only two bands and lack capability for fast switching in situ. Here, we exploit the band gap tunability and capability of all-perovskite tandem solar cells to demonstrate a new device concept realizing four spectral bands of response from a single multijunction device, with fast, optically controlled switching between the bands. The response to monochromatic light is highly selective and narrowband without the need for additional filters and switches to broader response bands on applying bias light. Sensitive photodetection above 6 × 1011 Jones is demonstrated in all modes, with rapid switching response times of <250 ns. We demonstrate proof of principle on how the manipulation of the modular multiband detector response through light conditions enables diverse applications in optical communications with secure encryption.
Collapse
Affiliation(s)
- Oliver
D. I. Moseley
- Cavendish
Laboratory, University of Cambridge, JJ Thomson Avenue, Cambridge CB3 0HE, U.K.
| | - Bart Roose
- Cavendish
Laboratory, University of Cambridge, JJ Thomson Avenue, Cambridge CB3 0HE, U.K.
- Department
of Chemical Engineering & Biotechnology, University of Cambridge, Philippa Fawcett Drive, Cambridge CB3 0AS, U.K.
| | - Szymon J. Zelewski
- Cavendish
Laboratory, University of Cambridge, JJ Thomson Avenue, Cambridge CB3 0HE, U.K.
- Department
of Semiconductor Materials Engineering, Faculty of Fundamental Problems
of Technology, Wrocław University
of Science and Technology, Wybrzeże Wyspiańskiego 27, 50-370 Wrocław, Poland
| | - Simon Kahmann
- Cavendish
Laboratory, University of Cambridge, JJ Thomson Avenue, Cambridge CB3 0HE, U.K.
- Department
of Chemical Engineering & Biotechnology, University of Cambridge, Philippa Fawcett Drive, Cambridge CB3 0AS, U.K.
| | - Krishanu Dey
- Cavendish
Laboratory, University of Cambridge, JJ Thomson Avenue, Cambridge CB3 0HE, U.K.
| | - Samuel D. Stranks
- Cavendish
Laboratory, University of Cambridge, JJ Thomson Avenue, Cambridge CB3 0HE, U.K.
- Department
of Chemical Engineering & Biotechnology, University of Cambridge, Philippa Fawcett Drive, Cambridge CB3 0AS, U.K.
| |
Collapse
|
45
|
Zhang H, Qu F, Li H. Front Transparent Passivation of CIGS-Based Solar Cells via AZO. Molecules 2022; 27:molecules27196285. [PMID: 36234821 PMCID: PMC9572985 DOI: 10.3390/molecules27196285] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/30/2022] [Revised: 09/19/2022] [Accepted: 09/20/2022] [Indexed: 11/25/2022] Open
Abstract
We report a novel strategy for the front passivation of solar cells via aluminum-doped zinc oxide (AZO) films in the case of CIGS solar cells, leading to the highest efficiency of 15.07% without alkali metal post treatment and anti−reflective layer. The good passivation of CIGS solar cells via AZO films is attributed to the field passivation simulated by the SCAPS−1D software. The AZO films also exhibit high optical transparency both in visible and near infrared wavelength region, high conductivity, and cost−effective fabrication advantage. Importantly, the AZO films are deposited at room temperature via radio−frequency magnetron sputtering, showing that the AZO films are also applicable to other solar cells such as perovskite solar cells. Our work is of significance for advancing the development of CIGS−based photovoltaics devices by the well front passivation of AZO. The wide application of AZO in other solar cells such as perovskite solar cells and related tandem solar cells may also accelerate the development of these solar cells because of potential passivation of AZO, low deposition temperature, and high optical transparency of AZO.
Collapse
Affiliation(s)
- He Zhang
- Institute of Electrical Engineering, Chinese Academy of Sciences, Beijing 100190, China
| | - Fei Qu
- Institute of Electrical Engineering, Chinese Academy of Sciences, Beijing 100190, China
| | - Hui Li
- Institute of Physics, Chinese Academy of Sciences, P.O. Box 603, Beijing 100190, China
- School of Physical Sciences, University of Chinese Academy of Sciences, Beijing 100049, China
- Correspondence:
| |
Collapse
|
46
|
Zhang Y, Fu Y, Song X, Zhang X. Releasable Water Charge-Trapping and Water-Resistant Photodetection using 1D Perovskitoid Hydrate Single Crystal. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2022; 34:e2204710. [PMID: 35858017 DOI: 10.1002/adma.202204710] [Citation(s) in RCA: 5] [Impact Index Per Article: 2.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/25/2022] [Revised: 07/14/2022] [Indexed: 06/15/2023]
Abstract
Hydrates of hybrid organic-inorganic perovskites have been discovered with MAPbI3 and are proved to be unstable in atmosphere. However, the influence of water molecules on the performance of optoelectronic devices is still not fully understood. Here, using a dication, 2-(dimethylamino) ethylamine (DMEN2+ ), a stable quasi-1D perovskitoid hydrate single crystal is designed and successfully synthesized, which is formulated as DMENPb2 I6 ·H2 O. In this design, both corner-sharing and edge-sharing connectivity are adopted, and water molecules are connected with the crystal through hydrogen bonding. It is discovered that such water sites distributed along the inorganic chains function both as charge traps and as releasable charge stocks. Optical excitation that overcomes the potential wells formed on these water sites may release these stocked charges and facilitate enhanced transportable charge density. Meanwhile, exciton diffusion and charge transport are strongly confined in the 1D transport channels. Above mechanisms are verified both by the transient absorption spectroscopy and by the photodetection performance. This introduces a new design strategy with a trapping-stock-releasing-transport roadmap for perovskitoid materials. Excellent water resistance endows this material with more advantages in the development of a new generation of optoelectronic devices.
Collapse
Affiliation(s)
- Yiwei Zhang
- Institute of Information Photonics Technology, Faculty of Science, Beijing University of Technology, Beijing, 100124, P. R. China
| | - Yulan Fu
- Institute of Information Photonics Technology, Faculty of Science, Beijing University of Technology, Beijing, 100124, P. R. China
| | - Xiaoyan Song
- College of Materials Science and Engineering, Key Laboratory of Advanced Functional Materials, Education Ministry of China, Beijing University of Technology, Beijing, 100124, P. R. China
| | - Xinping Zhang
- Institute of Information Photonics Technology, Faculty of Science, Beijing University of Technology, Beijing, 100124, P. R. China
| |
Collapse
|
47
|
Li C, Luo H, Gu H, Li H. BTO-Coupled CIGS Solar Cells with High Performances. MATERIALS (BASEL, SWITZERLAND) 2022; 15:5883. [PMID: 36079265 PMCID: PMC9457443 DOI: 10.3390/ma15175883] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 04/15/2022] [Revised: 05/16/2022] [Accepted: 05/17/2022] [Indexed: 06/15/2023]
Abstract
In order to improve the power conversion efficiency (PCE) of Cu(In,Ga)Se2 (CIGS) solar cells, a BaTiO3 (BTO) layer was inserted into the Cu(In,Ga)Se2. The performances of the BTO-coupled CIGS solar cells with structures of Mo/CIGS/CdS/i-ZnO/AZO, Mo/BTO/CIGS/CdS/i-ZnO/AZO, Mo/CIGS/BTO/CdS/i-ZnO/AZO, Mo/CIGS/CdS/BTO/i-ZnO/AZO, Mo/CIGS/BTO/i-ZnO/AZO, Mo/CIGS/CdS/BTO/AZO, and Mo/ CIGS/CdS(5 nm)/BTO(5 nm)/i-ZnO/AZO were systematically studied via the SCAPS-1D software. It was found that the power conversion efficiency (PCE) of a BTO-coupled CIGS solar cell with a device configuration of Mo/CIGS/CdS/BTO/AZO was 24.53%, and its open-circuit voltage was 931.70 mV. The working mechanism for the BTO-coupled CIGS solar cells with different device structures was proposed. Our results provide a novel strategy for improving the PCE of solar cells by combining a ferroelectric material into the p-n junction materials.
Collapse
Affiliation(s)
- Congmeng Li
- Institute of Electrical Engineering Chinese Academy of Sciences, Beijing 100190, China
- University of Chinese Academy of Sciences, Beijing 100049, China
| | - Haitian Luo
- Institute of Electrical Engineering Chinese Academy of Sciences, Beijing 100190, China
- University of Chinese Academy of Sciences, Beijing 100049, China
| | - Hongwei Gu
- Institute of Electrical Engineering Chinese Academy of Sciences, Beijing 100190, China
- University of Chinese Academy of Sciences, Beijing 100049, China
| | - Hui Li
- Institute of Electrical Engineering Chinese Academy of Sciences, Beijing 100190, China
- University of Chinese Academy of Sciences, Beijing 100049, China
| |
Collapse
|
48
|
Romano V, Agresti A, Verduci R, D’Angelo G. Advances in Perovskites for Photovoltaic Applications in Space. ACS ENERGY LETTERS 2022; 7:2490-2514. [PMID: 35990414 PMCID: PMC9380018 DOI: 10.1021/acsenergylett.2c01099] [Citation(s) in RCA: 7] [Impact Index Per Article: 3.5] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Indexed: 06/15/2023]
Abstract
Perovskites have emerged as promising light harvesters in photovoltaics. The resulting solar cells (i) are thin and lightweight, (ii) can be produced through solution processes, (iii) mainly use low-cost raw materials, and (iv) can be flexible. These features make perovskite solar cells intriguing as space technologies; however, the extra-terrestrial environment can easily cause the premature failure of devices. In particular, the presence of high-energy radiation is the most dangerous factor that can damage space technologies. This Review discusses the status and perspectives of perovskite photovoltaics in space applications. The main factors used to describe the space environment are introduced, and the results concerning the radiation hardness of perovskites toward protons, electrons, neutrons, and γ-rays are presented. Emphasis is given to the physicochemical processes underlying radiation damage in such materials. Finally, the potential use of perovskite solar cells in extra-terrestrial conditions is discussed by considering the effects of the space environment on the choice of the architecture and components of the devices.
Collapse
Affiliation(s)
- Valentino Romano
- Department
of Physics, Politecnico di Milano, Piazza Leonardo da Vinci 32, 20133 Milano, Italy
- Department
of ChiBioFarAm, University of Messina, 98166 Messina, Italy
| | - Antonio Agresti
- CHOSE
(Center for Hibrid and Organic Solar Energy), Department of Electronics
Engineering, University of Rome Tor Vergata, 00133 Roma, Italy
| | - Rosaria Verduci
- Department
of ChiBioFarAm, University of Messina, 98166 Messina, Italy
| | - Giovanna D’Angelo
- Department
of Mathematical and Computer Sciences, Physical Sciences and Earth
Sciences, University of Messina, 98166 Messina, Italy
- CNR,
Institute for Chemical-Physical Processes (IPCF), 98158 Messina, Italy
| |
Collapse
|
49
|
Sujith C, Joseph S, Mathew T, Mathew V. Ab initio investigation of the structural and electronic properties of tantalum thallium chalcogenides TaTlX3 (X = S,Se). J SOLID STATE CHEM 2022. [DOI: 10.1016/j.jssc.2022.123534] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/24/2022]
|
50
|
Cho Y, Jung HR, Jo W. Halide perovskite single crystals: growth, characterization, and stability for optoelectronic applications. NANOSCALE 2022; 14:9248-9277. [PMID: 35758131 DOI: 10.1039/d2nr00513a] [Citation(s) in RCA: 7] [Impact Index Per Article: 3.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/15/2023]
Abstract
Recently, metal halide perovskite materials have received significant attention as promising candidates for optoelectronic applications with tremendous achievements, owing to their outstanding optoelectronic properties and facile solution-processed fabrication. However, the existence of a large number of grain boundaries in perovskite polycrystalline thin films causes ion migration, surface defects, and instability, which are detrimental to device applications. Compared with their polycrystalline counterparts, perovskite single crystals have been explored to realize stable and excellent properties such as a long diffusion length and low trap density. The development of growth techniques and physicochemical characterizations led to the widespread implementation of perovskite single-crystal structures in optoelectronic applications. In this review, recent progress in the growth techniques of perovskite single crystals, including advanced crystallization methods, is summarized. Additionally, their optoelectronic characterizations are elucidated along with a detailed analysis of their optical properties, carrier transport mechanisms, defect densities, surface morphologies, and stability issues. Furthermore, the promising applications of perovskite single crystals in solar cells, photodetectors, light-emitting diodes, lasers, and flexible devices are discussed. The development of suitable growth and characterization techniques contributes to the fundamental investigation of these materials and aids in the construction of highly efficient optoelectronic devices based on halide perovskite single crystals.
Collapse
Affiliation(s)
- Yunae Cho
- New and Renewable Energy Research Centre, Ewha Womans University, Seoul, Republic of Korea.
| | - Hye Ri Jung
- Department of Physics, Ewha Womans University, Seoul, Republic of Korea
| | - William Jo
- New and Renewable Energy Research Centre, Ewha Womans University, Seoul, Republic of Korea.
- Department of Physics, Ewha Womans University, Seoul, Republic of Korea
| |
Collapse
|