Engineered Polystyrene-Based Microplastics of High Environmental Relevance

Retention of ZnO nanoparticles onto polypropylene and polystyrene microplastics: Aging-associated interactions and the role of aqueous chemistry

Microplastics (MPs) are pervasive and undergo environmental aging processes, which alters potential interaction with the co-contaminants. Hence, to assess their contaminant-carrying capacity, mimicking the weathering characteristics of secondary MPs is crucial. To this end, the present study investigated the interaction of Zinc oxide (nZnO) nanoparticles with non-irradiated (NI) and UV-irradiated (UI) forms of the most abundant MPs, such as polypropylene (PP) and polystyrene (PS), in aqueous environments. SEM images revealed mechanical abrasions on the surfaces of NI-MPs and their subsequent photoaging caused the formation of close-ended and open-ended cracks in UI-PP and UI-PS, respectively. Batch-sorption experiments elucidated nZnO uptake kinetics by PP and PS MPs, suggesting a sorption-desorption pathway due to weaker and stronger sorption sites until equilibrium was achieved. UI-PP showed higher nZnO (∼3000 mg/kg) uptake compared to NI-PP, while UI-PS showed similar or slightly decreased nZnO (∼2000 mg/kg) uptake compared to NI-PS. FTIR spectra and zeta potential measurements revealed electrostatic interaction as the dominant interaction mechanism. Higher nZnO uptake by MPs was noted between pH 6.5 and 8.5, whereas it decreased beyond this range. Despite DOM, MPs always retained ∼874 mg/kg nZnO irrespective of MPs type and extent of aging. The experimental results in river water showed higher nZnO uptake on MPs compared to DI water, attributed to mutual effect of ionic competition, DOM, and MP hydrophobicity. In the case of humic acids, complex synthetic and natural water matrices, NI-MPs retained more nZnO than UI-MPs, suggesting that photoaged MPs sorb less nZnO under environmental conditions than non-photoaged MPs. These findings enhance our understanding on interaction of the MPs with co-contaminants in natural environments.

Hands-On Activity Illustrating the Sorting Process of Recycled Waste and Its Role in Promoting Sustainable Solutions

Effective recycling is not merely a matter of collecting waste; it also requires meticulous categorization to maximize the potential for reusing material and minimizing waste sent to landfills. Education and awareness of the sorting and recycling process bottlenecks need to be emphasized and extended beyond higher educational contexts (e.g., in multiple stages of educational pathways, such as middle or high school). Hence, this project introduces a hands-on plastic sorting activity where students use recycled waste to be sorted based on their physical properties. Several tools were provided to perform the separation, such as water, sieves, magnets, and manual/visual separation while considering the time and cost associated with each tool. The activity was evaluated by pre- and post-evaluations based on Likert-scale and open-ended questions grouped in several categories related to the sorting process. In several categories, we observed that the activity enhanced student knowledge (e.g., general sorting understanding), while in other categories, there was no growth. From open-ended questions, students expressed an understanding of how to sort recycled waste and an appreciation for the trade-offs in developing sorting solutions. This activity effectively enhanced students' awareness of the sorting process of recycled waste. It lays the foundation for future inquiry and outreach project design.

Everything falls apart: How solids degrade and release nanomaterials, composite fragments, and microplastics

To ensure the safe use of materials, one must assess the identity and quantity of exposure. Solid materials, such as plastics, metals, coatings and cements, degrade to some extent during their life cycle, and releases can occur during manufacturing, use and end-of-life. Releases (e.g., what is released, how does release happen, and how much material is released) depend on the composition and internal (nano)structures of the material as well as the applied stresses during the lifecycle. We consider, in some depth, releases from mechanical, weathering and thermal stresses and specifically address the use cases of fused-filament 3D printing, dermal contact, food contact and textile washing. Solid materials can release embedded nanomaterials, composite fragments, or micro- and nanoplastics, as well as volatile organics, ions and dissolved organics. The identity of the release is often a heterogenous mixture and requires adapted strategies for sampling and analysis, with suitable quality control measures. Control materials enhance robustness by enabling comparative testing, but reference materials are not always available as yet. The quantity of releases is typically described by time-dependent rates that are modulated by the nature and intensity of the applied stress, the chemical identity of the polymer or other solid matrix, and the chemical identity and compatibility of embedded engineered nanomaterials (ENMs) or other additives. Standardization of methods and the documentation of metadata, including all the above descriptors of the tested material, applied stresses, sampling and analytics, are identified as important needs to advance the field and to generate robust, comparable assessments. In this regard, there are strong methodological synergies between the study of all solid materials, including the study of micro- and nanoplastics. From an outlook perspective, we review the hazard of the released entities, and show how this informs risk assessment. We also address the transfer of methods to related issues such as tyre wear, advanced materials and advanced manufacturing, biodegradable polymers, and non-solid matrices. As the consideration of released entities will become more routine in industry via lifecycle assessment in Safe-and-Sustainable-by-Design practices, release assessments will require careful design of the study with quality controls, the use of agreed-on test materials and standardized methods where these exist and the adoption of clearly defined data reporting practices that enable data reuse, meta-analyses, and comparative studies.

Mechanistic interpretation of the sorption of terbuthylazine pesticide onto aged microplastics

Microplastics (MPs) pose a global concern due to their ubiquitous distribution. Once in the environment, they are subject to aging, which changes their chemical-physical properties and ability to interact with organic pollutants, such as pesticides. Therefore, this study investigated the interaction of the hydrophobic herbicide terbuthylazine (TBA), which is widely used in agriculture, with artificially aged polyethylene (PE) MP (PE-MP) to understand how aging affects its sorption. PE was aged by an accelerated weathering process including UV irradiation, hydrogen peroxide, and ultrasonic treatment, and aged particles were characterized in comparison to pristine particles. Sorption kinetics were performed for aged and pristine materials, while further sorption studies with aged PE-MP included determining environmental factors such as pH, temperature, and TBA concentration. Sorption of TBA was found to be significantly lower on aged PE-MP compared to pristine particles because aging led to the formation of oxygen-containing functional groups, resulting in a reduction in hydrophobicity and the formation of negatively charged sites on oxidized surfaces. For pristine PE-MP, sorption kinetics were best described by the pseudo-second-order model, while it was intra-particle diffusion for aged PE-MP as a result of crack and pore formation. Sorption followed a decreasing trend with increasing pH, while it became less favorable at higher temperatures. The isotherm data revealed a complex sorption process on altered, heterogeneous surfaces involving hydrophobic interactions, hydrogen bonding, and π-π interactions, and the process was best described by the Sips adsorption isotherm model. Desorption was found to be low, confirming a strong interaction. However, thermodynamic results imply that increased temperatures, such as those resulting from climate change, could promote the re-release of TBA from aged PE-MP into the environment. Time-of-flight secondary ion mass spectrometry (ToF-SIMS) confirmed TBA sorption onto PE.

Unraveling the micro- and nanoplastic predicament: A human-centric insight

Micro- and nanoplastics are vast anthropogenic pollutants in our direct surroundings with a robust environmental stability and a potential for a long-lasting and increasing global circulation. This has raised concerns among the public and policy makers for human health upon exposure to these particles. The micro- and nanoplastic burden on humans is currently under debate, along with criticism on the experimental approaches used in hazard assessment. The present review presents an overview of the human-relevant aspects associated with the current micro-and nanoplastic burden. We focus on environmental circulation and the estimation of exposure quantities to humans, along with a state-of-the-art overview of particle accumulation in over 15 human organs and other specimen. Additionally, data regarding particle characteristics used in toxicity testing was extracted from 91 studies and discussed considering their environmental and human relevance.

Aging of polystyrene microplastics by UV/Sodium percarbonate oxidation: Organic release, mechanism, and disinfection by-product formation

The occurrence and transformation of microplastics (MPs) in environment has attracted considerable attention. However, the release characteristics of MP-derived dissolved organic matter (MP-DOM) under oxidation conditions and the effect of DOM on subsequent chlorination disinfection by-product (DBP) still lacks relevant information. This study focused on the conversion of polystyrene microplastics (PSMPs) in the advanced oxidation of ultraviolet-activated sodium percarbonate (UV/SPC-AOP) and the release characteristics of MP-DOM. The DBP formation potential of MP-DOM was also investigated. As a result, UV/SPC significantly enhanced the aging and fragmentation of PSMPs. Under UV irradiation, the fluorescence peak intensity and position of humus-like and protein-like components of MP-DOM were correlated with SPC concentration. The aging MP suspension was analyzed by gas chromatography-mass spectrometry (GC-MS), and various alkyl-cleavage and oxidation products were identified. Quenching experiments and electron paramagnetic resonance (EPR) detection confirmed that carbonate and hydroxyl radicals jointly dominated the conversion of PSMPs. The formation of DBP was related to the components of MP-DOM. Overall, these results help to understand the aging behavior of MPs in AOP. Moreover, MP-DOM released by MPs after AOP oxidation may be a precursor of DBPs, which deserved more attention.

Sample transformation in online separations: how chemical conversion advances analytical technology

While the advent of modern analytical technology has allowed scientists to determine the complexity of mixtures, it also spurred the demand to understand these sophisticated mixtures better. Chemical transformation can be used to provide insights into properties of complex samples such as degradation pathways or molecular heterogeneity that are otherwise unaccessible. In this article, we explore how sample transformation is exploited across different application fields to empower analytical methods. Transformation mechanisms include molecular-weight reduction, controlled degradation, and derivatization. Both offline and online transformation methods have been explored. The covered studies show that sample transformation facilitates faster reactions (e.g. several hours to minutes), reduces sample complexity, unlocks new sample dimensions (e.g. functional groups), provides correlations between multiple sample dimensions, and improves detectability. The article highlights the state-of-the-art and future prospects, focusing in particular on the characterization of protein and nucleic-acid therapeutics, nanoparticles, synthetic polymers, and small molecules.

Aging characteristics of degradable and non-biodegradable microplastics and their adsorption mechanism for sulfonamides

As emerging pollutants, microplastics (MPs) and antibiotics (ATs) became a research hotspot in recent years. To evaluate the carrier effect of degradable and non-biodegradable MPs in the aquatic environment, the adsorption behaviors of polyamide (PA) and polylactic acid (PLA) towards two sulfonamide antibiotics (SAs) were investigated. Both chemical and photo-aging were used to handle the virgin MPs. Compared with PA, PLA was aged more drastically, showing the obvious grooves, notches and folds. However, due to the higher temperature during chemical aging, the tiny KPLA (PLA aged by K2S2O8) particles were agglomerated and the specific surface area was reduced to nearly 95 %. For PA, the oxidation of chemical aging was stronger than photo-aging. After aging, the hydrophilicity and polarity of MPs increased. In the adsorption experiments, the adsorption capacity of PA towards SAs was 1.7 times higher than that of PLA. Aging process enabled the adsorption capacity of PLA increased 1.22-3.18 times. Overall, the adsorption capacity of sulfamethoxazole (SMX) by both MPs was superior to sulfamerazine (SMR). These results would help to understand the carrier effects and potential ecological risks of MPs towards co-existing contaminants.

Risk assessment framework for microplastic in marine environments

Constantly raising microplastic (MP) contamination of water sources poses a direct threat to the gentle balance of the marine environment. This study focuses on a multifactor hazard evaluation of conventional (polyethylene - PE, polypropylene - PP, and polystyrene - PS) and alternative (polyethylene terephthalate with 25 % or 50 % recycled material and polylactic acid) plastics. The risk assessment framework explored included MP abundance, water acidification potential, surface oxidation, fragmentation, and bacterial growth inhibition. Based on MP monitoring campaigns worldwide, we conclude that PE-based plastics are the most abundant MPs in water samples (comprise up to 82 % the MP in those samples). A year-long weathering experiment showed that PS-based and PP-based plastics were oxidized to a higher extent, resulting in the highest water acidification with pH reduction of up to three orders of magnitude. Finally, our laboratory experiments showed that weathered PS was the most fragile plastic during mechanical degradation, while both PP- and PS-based plastic extracts showed a significant growth inhibition toward the marine microorganisms (Bacillus sp. and Pseudoaltermonas sp). Using the examined factors as weighted inputs into our framework, this holistic evaluation of hazards suggest that PP-based plastic products were the most hazardous compared to the other conventional and alternative plastic types.

Sorption of ionic liquids in soil enriched with polystyrene microplastic reveals independent behavior of cations and anions

Recently, much attention has been focused on the application of the Ionic Liquids (ILs) with herbicidal activity in agriculture. It has been suggested that through the appropriate selection of cations and anions, one can adjust the properties of ILs, particularly the hydrophobicity, solubility, bioavailability, toxicity. In practical agricultural conditions, it will be beneficial to reduce the mobility of herbicidal anions, such as the commonly applied 2,4-dichlorophenoxyacetic acid [2,4-D] in the soil. Furthermore, microplastics are becoming increasingly prevalent in the soil, potentially stimulating herbicidal sorption. Therefore, we investigated whether cations in ILs influence the mobility of anions in OECD soil supplemented with polystyrene microplastic (PS). For this purpose, we used the 2,4-D based ILs consisting of: a hydrophilic choline cation [Chol][2,4-D] and a hydrophobic choline cation with a C12chain [C12Chol][2,4-D]. Characterization of selected micropolystyrene was carried out using the BET sorption-desorption isotherm, particle size distribution and changes in soil sorption parameters such as soil sorption capacity and cation exchange capacity. Based on the batch sorption experiment, the effect of microplastic on the sorption of individual cations and anions in soil contaminated with micropolystyrene was evaluated. The results obtained indicate that the introduction of a 1-10% (w/w) PS resulted in an 18-23% increase of the soil sorption capacity. However, the sorption of both ILs' cations increased only by 3-5%. No sorption of the [2,4-D] anion was noted. This suggests that cations and anions forming ILs, behave independently of each other in the environment. The results indicate the fact that ILs upon introduction into the environment are not a new type of emerging contaminant, but rather a typical mixture of ions. It is worth noting that when analyzing the behavior of ILs in the environment, it is necessary to follow the fate of both cations and anions.

Fate and environmental behaviors of microplastics through the lens of free radical

Microplastics (MPs), as plastics with a size of less than 5 mm, are ubiquitously present in the environment and become an increasing environmental concern. The fate and environmental behavior of MPs are significantly influenced by the presence of free radicals. Free radicals can cause surface breakage, chemical release, change in crystallinity and hydrophilicity, and aggregation of MPs. On the other hand, the generation of free radicals with a high concentration and oxidation potential can effectively degrade MPs. There is a limited review article to bridge the fate and environmental behaviors of MP with free radicals and their reactions. This paper reviews the sources, types, detection methods, generation mechanisms, and influencing factors of free radicals affecting the environmental processes of MPs, the environmental effects of MPs controlled by free radicals, and the degradation strategies of MPs based on free radical-associated technologies. Moreover, this review elaborates on the limitations of the current research and provides ideas for future research on the interactions between MPs and free radicals to better explain their environmental impacts and control their risks. This article aims to keep the reader abreast of the latest development in the fate and environmental behaviors of MP with free radicals and their reactions and to bridge free radical chemistry with MP control methodology.

Toxicity of microplastics and triclosan, alone and in combination, to the fertilisation success of a broadcast spawning bivalve Tegillarca granosa

Since most marine invertebrates adopted external fertilisation, their fertilisation process is particularly vulnerable to aquatic pollutants. Both antimicrobial ingredients and microplastics (MPs) are ubiquitous in aquatic environments; however, their synergistic effects on the fertilisation of marine invertebrates remain unclear. Therefore, in this study, the fertilisation toxicity of MPs and triclosan (TCS), alone and in combination, was investigated in the broadcast spawning bivalve Tegillarca granosa. Results showed that MPs and TCS significantly suppressed the fertilisation success of T. granosa. As the fertilisation success of broadcast spawning invertebrates depends on successful gamete collisions, gamete fusion, and egg activation, sperm swimming velocity, viability, gamete collision probability, ATP status, and ion-transport enzyme activities were also analysed to further ascertain the underlying toxicity mechanisms. In summary, our findings indicate that the presence of MPs may enhance the fertilisation toxicity of TCS by hampering sperm-egg collision probability, reducing gamete fusion efficiency, and restricting Ca²⁺ oscillation formation.

Holes on surfaces of the weathered plastic fragments from coastal beaches

The surface morphology of weathered plastics undergoes a variety of changes. In this study, 3950 plastic fragments from 26 beaches around the world, were assessed to identify holes. Holes were identified on 123 fragments on 20 beaches, with the highest frequency (10.3 %) being identified at Qesm AL Gomrok Beach in Egypt. The distribution of holes could be divided into even, single-sided, and random types. The external and internal holes were similar in size (37 ± 15 μm) of even type fragments. The external holes were larger than the internal holes in single-sided (516 ± 259 μm and 383 ± 161 μm) and random (588 ± 262 μm and 454 ± 210 μm) fragment types. The external hole sizes were positively correlated with the internal hole sizes for each type. This study reports a novel deformation phenomenon on the surface of weathered plastics and highlights their potential effects on plastics.

The complexity of micro- and nanoplastic research in the genus Daphnia - A systematic review of study variability and a meta-analysis of immobilization rates

In recent years, the number of publications on nano- and microplastic particles (NMPs) effects on freshwater organisms has increased rapidly. Freshwater crustaceans of the genus Daphnia are widely used in ecotoxicological research as model organisms for assessing the impact of NMPs. However, the diversity of experimental designs in these studies makes conclusions about the general impact of NMPs on Daphnia challenging. To approach this, we systematically reviewed the literature on NMP effects on Daphnia and summarized the diversity of test organisms, experimental conditions, NMP properties and measured endpoints to identify gaps in our knowledge of NMP effects on Daphnia. We use a meta-analysis on mortality and immobilization rates extracted from the compiled literature to illustrate how NMP properties, study parameters and the biology of Daphnia can impact outcomes in toxicity bioassays. In addition, we investigate the extent to which the available data can be used to predict the toxicity of untested NMPs based on the extracted parameters. Based on our results, we argue that focusing on a more diverse set of NMP properties combined with a more detailed characterization of the particles in future studies will help to fill current research gaps, improve predictive models and allow the identification of NMP properties linked to toxicity.

Physicochemical changes in microplastics and formation of DBPs under ozonation

Microplastics (MPs) are substances that pose a risk to both human life and the environment. Their types and production are increasing year on year, and their potential to cause environmental pollution is a worldwide concern. Conventional water treatment processes, particularly coagulation and sedimentation, are not effective at removing all MPs. It is therefore important to assess the morphological changes in the MPs, i.e., the thermoplastic polyurethane (TPU) and polyethylene (PE), during ozonation and the dissolved organic carbon leaching as well as chloroform formation in the subsequent chlorination. The results show that the appearance and surface chemistry of the MPs changed during the ozonation process, most notably for TPU. The trichloromethane (CHCl₃) generation during chlorination was 0.168 and 0.152 μmol/L for TPU and PE, respectively, and the ozone pretreatment significantly increased the CHCl₃ yield of TPU, while it had a weak effect on PE. Additional disinfection byproducts (DBPs), including CHCl₂Br, CHClBr₂, and CHBr₃, were produced in the presence of bromide ions in the water column, and the total amount of DBPs produced by PE, PE-O, TPU, and TPU-O was significantly increased to 0.787, 0.814, 0.931, and 1.391 μmol/L, respectively. The study provides useful information for the environmental risk assessment of two representative MPs, i.e., TPU and MPs, in disinfection procedures for drinking water.

Polystyrene microplastics mediate inflammatory responses in the chicken thymus by Nrf2/NF-κB pathway and trigger autophagy and apoptosis

Microplastics (MPs) are now a hot environmental contaminant. However, researchers paid little attention to their effects on immune organs such as the thymus. Here, we exposed chickens to a concentration gradient of polystyrene microplastics (PS-MPs) and then followed the decrease in the thymus index. HE staining showed cellular infiltration in the thymus. The assay kit corroborated that PS-MPs impelled oxidative stress in the thymus: increased MDA levels, downregulated antioxidants such as SOD, CAT, and GSH, and significantly undermined total antioxidant capacity. Western blotting and qRT-PCR results showed that Nrf2/NF-κB, Bcl-2/Bax, and AKT signaling pathways were activated in the thymus after exposure to PS-MPs. It stimulated the increased expression of downstream such as IL-1β, caspase-3, and Beclin1, triggering thymus inflammation, apoptosis, and autophagy. This study provides new insights into the field of microplastic immunotoxicity and highlights potential environmental hazards in poultry farming.

The Minderoo-Monaco Commission on Plastics and Human Health

Background

Plastics have conveyed great benefits to humanity and made possible some of the most significant advances of modern civilization in fields as diverse as medicine, electronics, aerospace, construction, food packaging, and sports. It is now clear, however, that plastics are also responsible for significant harms to human health, the economy, and the earth's environment. These harms occur at every stage of the plastic life cycle, from extraction of the coal, oil, and gas that are its main feedstocks through to ultimate disposal into the environment. The extent of these harms not been systematically assessed, their magnitude not fully quantified, and their economic costs not comprehensively counted.

Goals

The goals of this Minderoo-Monaco Commission on Plastics and Human Health are to comprehensively examine plastics' impacts across their life cycle on: (1) human health and well-being; (2) the global environment, especially the ocean; (3) the economy; and (4) vulnerable populations-the poor, minorities, and the world's children. On the basis of this examination, the Commission offers science-based recommendations designed to support development of a Global Plastics Treaty, protect human health, and save lives.

Report Structure

This Commission report contains seven Sections. Following an Introduction, Section 2 presents a narrative review of the processes involved in plastic production, use, and disposal and notes the hazards to human health and the environment associated with each of these stages. Section 3 describes plastics' impacts on the ocean and notes the potential for plastic in the ocean to enter the marine food web and result in human exposure. Section 4 details plastics' impacts on human health. Section 5 presents a first-order estimate of plastics' health-related economic costs. Section 6 examines the intersection between plastic, social inequity, and environmental injustice. Section 7 presents the Commission's findings and recommendations.

Plastics

Plastics are complex, highly heterogeneous, synthetic chemical materials. Over 98% of plastics are produced from fossil carbon- coal, oil and gas. Plastics are comprised of a carbon-based polymer backbone and thousands of additional chemicals that are incorporated into polymers to convey specific properties such as color, flexibility, stability, water repellence, flame retardation, and ultraviolet resistance. Many of these added chemicals are highly toxic. They include carcinogens, neurotoxicants and endocrine disruptors such as phthalates, bisphenols, per- and poly-fluoroalkyl substances (PFAS), brominated flame retardants, and organophosphate flame retardants. They are integral components of plastic and are responsible for many of plastics' harms to human health and the environment.Global plastic production has increased almost exponentially since World War II, and in this time more than 8,300 megatons (Mt) of plastic have been manufactured. Annual production volume has grown from under 2 Mt in 1950 to 460 Mt in 2019, a 230-fold increase, and is on track to triple by 2060. More than half of all plastic ever made has been produced since 2002. Single-use plastics account for 35-40% of current plastic production and represent the most rapidly growing segment of plastic manufacture.Explosive recent growth in plastics production reflects a deliberate pivot by the integrated multinational fossil-carbon corporations that produce coal, oil and gas and that also manufacture plastics. These corporations are reducing their production of fossil fuels and increasing plastics manufacture. The two principal factors responsible for this pivot are decreasing global demand for carbon-based fuels due to increases in 'green' energy, and massive expansion of oil and gas production due to fracking.Plastic manufacture is energy-intensive and contributes significantly to climate change. At present, plastic production is responsible for an estimated 3.7% of global greenhouse gas emissions, more than the contribution of Brazil. This fraction is projected to increase to 4.5% by 2060 if current trends continue unchecked.

Plastic Life Cycle

The plastic life cycle has three phases: production, use, and disposal. In production, carbon feedstocks-coal, gas, and oil-are transformed through energy-intensive, catalytic processes into a vast array of products. Plastic use occurs in every aspect of modern life and results in widespread human exposure to the chemicals contained in plastic. Single-use plastics constitute the largest portion of current use, followed by synthetic fibers and construction.Plastic disposal is highly inefficient, with recovery and recycling rates below 10% globally. The result is that an estimated 22 Mt of plastic waste enters the environment each year, much of it single-use plastic and are added to the more than 6 gigatons of plastic waste that have accumulated since 1950. Strategies for disposal of plastic waste include controlled and uncontrolled landfilling, open burning, thermal conversion, and export. Vast quantities of plastic waste are exported each year from high-income to low-income countries, where it accumulates in landfills, pollutes air and water, degrades vital ecosystems, befouls beaches and estuaries, and harms human health-environmental injustice on a global scale. Plastic-laden e-waste is particularly problematic.

Environmental Findings

Plastics and plastic-associated chemicals are responsible for widespread pollution. They contaminate aquatic (marine and freshwater), terrestrial, and atmospheric environments globally. The ocean is the ultimate destination for much plastic, and plastics are found throughout the ocean, including coastal regions, the sea surface, the deep sea, and polar sea ice. Many plastics appear to resist breakdown in the ocean and could persist in the global environment for decades. Macro- and micro-plastic particles have been identified in hundreds of marine species in all major taxa, including species consumed by humans. Trophic transfer of microplastic particles and the chemicals within them has been demonstrated. Although microplastic particles themselves (>10 µm) appear not to undergo biomagnification, hydrophobic plastic-associated chemicals bioaccumulate in marine animals and biomagnify in marine food webs. The amounts and fates of smaller microplastic and nanoplastic particles (MNPs <10 µm) in aquatic environments are poorly understood, but the potential for harm is worrying given their mobility in biological systems. Adverse environmental impacts of plastic pollution occur at multiple levels from molecular and biochemical to population and ecosystem. MNP contamination of seafood results in direct, though not well quantified, human exposure to plastics and plastic-associated chemicals. Marine plastic pollution endangers the ocean ecosystems upon which all humanity depends for food, oxygen, livelihood, and well-being.

Human Health Findings

Coal miners, oil workers and gas field workers who extract fossil carbon feedstocks for plastic production suffer increased mortality from traumatic injury, coal workers' pneumoconiosis, silicosis, cardiovascular disease, chronic obstructive pulmonary disease, and lung cancer. Plastic production workers are at increased risk of leukemia, lymphoma, hepatic angiosarcoma, brain cancer, breast cancer, mesothelioma, neurotoxic injury, and decreased fertility. Workers producing plastic textiles die of bladder cancer, lung cancer, mesothelioma, and interstitial lung disease at increased rates. Plastic recycling workers have increased rates of cardiovascular disease, toxic metal poisoning, neuropathy, and lung cancer. Residents of "fenceline" communities adjacent to plastic production and waste disposal sites experience increased risks of premature birth, low birth weight, asthma, childhood leukemia, cardiovascular disease, chronic obstructive pulmonary disease, and lung cancer.During use and also in disposal, plastics release toxic chemicals including additives and residual monomers into the environment and into people. National biomonitoring surveys in the USA document population-wide exposures to these chemicals. Plastic additives disrupt endocrine function and increase risk for premature births, neurodevelopmental disorders, male reproductive birth defects, infertility, obesity, cardiovascular disease, renal disease, and cancers. Chemical-laden MNPs formed through the environmental degradation of plastic waste can enter living organisms, including humans. Emerging, albeit still incomplete evidence indicates that MNPs may cause toxicity due to their physical and toxicological effects as well as by acting as vectors that transport toxic chemicals and bacterial pathogens into tissues and cells.Infants in the womb and young children are two populations at particularly high risk of plastic-related health effects. Because of the exquisite sensitivity of early development to hazardous chemicals and children's unique patterns of exposure, plastic-associated exposures are linked to increased risks of prematurity, stillbirth, low birth weight, birth defects of the reproductive organs, neurodevelopmental impairment, impaired lung growth, and childhood cancer. Early-life exposures to plastic-associated chemicals also increase the risk of multiple non-communicable diseases later in life.

Economic Findings

Plastic's harms to human health result in significant economic costs. We estimate that in 2015 the health-related costs of plastic production exceeded $250 billion (2015 Int$) globally, and that in the USA alone the health costs of disease and disability caused by the plastic-associated chemicals PBDE, BPA and DEHP exceeded $920 billion (2015 Int$). Plastic production results in greenhouse gas (GHG) emissions equivalent to 1.96 gigatons of carbon dioxide (CO2e) annually. Using the US Environmental Protection Agency's (EPA) social cost of carbon metric, we estimate the annual costs of these GHG emissions to be $341 billion (2015 Int$).These costs, large as they are, almost certainly underestimate the full economic losses resulting from plastics' negative impacts on human health and the global environment. All of plastics' economic costs-and also its social costs-are externalized by the petrochemical and plastic manufacturing industry and are borne by citizens, taxpayers, and governments in countries around the world without compensation.

Social Justice Findings

The adverse effects of plastics and plastic pollution on human health, the economy and the environment are not evenly distributed. They disproportionately affect poor, disempowered, and marginalized populations such as workers, racial and ethnic minorities, "fenceline" communities, Indigenous groups, women, and children, all of whom had little to do with creating the current plastics crisis and lack the political influence or the resources to address it. Plastics' harmful impacts across its life cycle are most keenly felt in the Global South, in small island states, and in disenfranchised areas in the Global North. Social and environmental justice (SEJ) principles require reversal of these inequitable burdens to ensure that no group bears a disproportionate share of plastics' negative impacts and that those who benefit economically from plastic bear their fair share of its currently externalized costs.

Conclusions

It is now clear that current patterns of plastic production, use, and disposal are not sustainable and are responsible for significant harms to human health, the environment, and the economy as well as for deep societal injustices.The main driver of these worsening harms is an almost exponential and still accelerating increase in global plastic production. Plastics' harms are further magnified by low rates of recovery and recycling and by the long persistence of plastic waste in the environment.The thousands of chemicals in plastics-monomers, additives, processing agents, and non-intentionally added substances-include amongst their number known human carcinogens, endocrine disruptors, neurotoxicants, and persistent organic pollutants. These chemicals are responsible for many of plastics' known harms to human and planetary health. The chemicals leach out of plastics, enter the environment, cause pollution, and result in human exposure and disease. All efforts to reduce plastics' hazards must address the hazards of plastic-associated chemicals.

Recommendations

To protect human and planetary health, especially the health of vulnerable and at-risk populations, and put the world on track to end plastic pollution by 2040, this Commission supports urgent adoption by the world's nations of a strong and comprehensive Global Plastics Treaty in accord with the mandate set forth in the March 2022 resolution of the United Nations Environment Assembly (UNEA).International measures such as a Global Plastics Treaty are needed to curb plastic production and pollution, because the harms to human health and the environment caused by plastics, plastic-associated chemicals and plastic waste transcend national boundaries, are planetary in their scale, and have disproportionate impacts on the health and well-being of people in the world's poorest nations. Effective implementation of the Global Plastics Treaty will require that international action be coordinated and complemented by interventions at the national, regional, and local levels.This Commission urges that a cap on global plastic production with targets, timetables, and national contributions be a central provision of the Global Plastics Treaty. We recommend inclusion of the following additional provisions:The Treaty needs to extend beyond microplastics and marine litter to include all of the many thousands of chemicals incorporated into plastics.The Treaty needs to include a provision banning or severely restricting manufacture and use of unnecessary, avoidable, and problematic plastic items, especially single-use items such as manufactured plastic microbeads.The Treaty needs to include requirements on extended producer responsibility (EPR) that make fossil carbon producers, plastic producers, and the manufacturers of plastic products legally and financially responsible for the safety and end-of-life management of all the materials they produce and sell.The Treaty needs to mandate reductions in the chemical complexity of plastic products; health-protective standards for plastics and plastic additives; a requirement for use of sustainable non-toxic materials; full disclosure of all components; and traceability of components. International cooperation will be essential to implementing and enforcing these standards.The Treaty needs to include SEJ remedies at each stage of the plastic life cycle designed to fill gaps in community knowledge and advance both distributional and procedural equity.This Commission encourages inclusion in the Global Plastic Treaty of a provision calling for exploration of listing at least some plastic polymers as persistent organic pollutants (POPs) under the Stockholm Convention.This Commission encourages a strong interface between the Global Plastics Treaty and the Basel and London Conventions to enhance management of hazardous plastic waste and slow current massive exports of plastic waste into the world's least-developed countries.This Commission recommends the creation of a Permanent Science Policy Advisory Body to guide the Treaty's implementation. The main priorities of this Body would be to guide Member States and other stakeholders in evaluating which solutions are most effective in reducing plastic consumption, enhancing plastic waste recovery and recycling, and curbing the generation of plastic waste. This Body could also assess trade-offs among these solutions and evaluate safer alternatives to current plastics. It could monitor the transnational export of plastic waste. It could coordinate robust oceanic-, land-, and air-based MNP monitoring programs.This Commission recommends urgent investment by national governments in research into solutions to the global plastic crisis. This research will need to determine which solutions are most effective and cost-effective in the context of particular countries and assess the risks and benefits of proposed solutions. Oceanographic and environmental research is needed to better measure concentrations and impacts of plastics <10 µm and understand their distribution and fate in the global environment. Biomedical research is needed to elucidate the human health impacts of plastics, especially MNPs.

Summary

This Commission finds that plastics are both a boon to humanity and a stealth threat to human and planetary health. Plastics convey enormous benefits, but current linear patterns of plastic production, use, and disposal that pay little attention to sustainable design or safe materials and a near absence of recovery, reuse, and recycling are responsible for grave harms to health, widespread environmental damage, great economic costs, and deep societal injustices. These harms are rapidly worsening.While there remain gaps in knowledge about plastics' harms and uncertainties about their full magnitude, the evidence available today demonstrates unequivocally that these impacts are great and that they will increase in severity in the absence of urgent and effective intervention at global scale. Manufacture and use of essential plastics may continue. However, reckless increases in plastic production, and especially increases in the manufacture of an ever-increasing array of unnecessary single-use plastic products, need to be curbed.Global intervention against the plastic crisis is needed now because the costs of failure to act will be immense.

Aging of Nanoplastics Significantly Affects Protein Corona Composition Thus Enhancing Macrophage Uptake

Nanoplastics (NPs), as emerging contaminants, have attracted increasing attention for their effects on human exposure and potential health risks. The protein corona formed on the surface of NPs affects the biological activity and fate of the NPs in vivo. However, how environmental aging, an inevitable process once NPs enter the environment, affects the formation of protein corona on NPs is still unclear. This study investigated the changes in the compositions of protein corona formed on photo-aged polystyrene (PS) NPs in human bronchoalveolar lavage fluid (BALF), corresponding to the inhalation exposure pathway. The results demonstrated that both the species and abundance of proteins in the BALF protein corona on the surface of PS NPs were altered by aging. In addition, the aged PS NPs are more hydrophilic and less electronegative than the pristine PS NPs; hence, there is an increased sorption of more negatively charged hydrophilic proteins. Moreover, aging-induced alterations in BALF protein corona enhanced the uptake of aged PS NPs by lung macrophages J774A.1 through phagocytosis and clathrin-mediated endocytosis. These findings highlight the importance of environmental aging processes in the biosafety assessment of nanoplastics.

Physicochemical and biological ageing processes of (micro)plastics in the environment: a multi-tiered study on polyethylene

Pollution by plastic and microplastic impacts the environment globally. Knowledge on the ageing mechanisms of plastics in natural settings is needed to understand their environmental fate and their reactivity in the ecosystems. Accordingly, the study of ageing processes is gaining focus in the context of the environmental sciences. However, laboratory-based experimental research has typically assessed individual ageing processes, limiting environmental applicability. In this study, we propose a multi-tiered approach to study the environmental ageing of polyethylene plastic fragments focusing on the combined assessment of physical and biological processes in sequence. The ageing protocol included ultraviolet irradiation in air and in a range of water solutions, followed by a biofouling test. Changes in surface characteristics were assessed by Fourier transform infrared spectroscopy, scanning electron microscopy, and water contact angle. UV radiation both in air and water caused a significant increase in the density of oxidized groups (i.e., hydroxyl and carbonyl) on the plastic surface, whereby water solution chemistry influenced the process both by modulating surface oxidation and morphology. Biofouling, too, was a strong determinant of surface alterations, regardless of the prior irradiation treatments. All biofouled samples present (i) specific infrared bands of new surface functional groups (e.g., amides and polysaccharides), (ii) a further increase in hydroxyl and carbonyl groups, (iii) the diffuse presence of algal biofilm on the plastic surface, and (iv) a significant decrease in surface hydrophobicity. This suggests that biological-driven alterations are not affected by the level of physicochemical ageing and may represent, in real settings, the main driver of alteration of both weathered and pristine plastics. This work highlights the potentially pivotal role of biofouling as the main process of plastic ageing, providing useful technical insights for future experimental works. These results also confirm that a multi-tiered laboratory approach permits a realistic simulation of plastic environmental ageing in controlled conditions.

Mediterranean microplastic contamination: Israel's coastline contributions

This study provides an analysis of the current state of microplastic (MP) contamination along the Mediterranean coastline of Israel. Six strategic sites were monitored in this study - each representing a unique coastal environment. We conclude that Tel Aviv and Hadera, both located near stream estuaries, were highly contaminated (18,777 particles/m³) with MP compared to the other locations. The MP detected included both secondary MP and pristine polymeric pellets. In-depth characterization of the MP illustrated a large percentage of both fragmented and film MP morphologies and the most common MP polymers were polyethylene and polypropylene. Further particle analysis showed that MPs were contaminated with biofilm, including microorganisms such as diatoms, as well as metal residues. Through the spatial analysis presented herein we suggest that local rivers are significant contributors to MP contamination along the Mediterranean Sea coastline of Israel and may pose a direct threat to environment and human health.

Sorption of two common antihypertensive drugs onto polystyrene microplastics in water matrices

Recent studies have shown the widespread occurrence of microplastics in multiple environmental compartments. When discharged into the aquatic environment, microplastics interact with other chemicals acting as vectors of organic and inorganic micropollutants. In the present study, we examined the sorption of two commonly used antihypertensive drugs, valsartan (VAL) and losartan (LOS), onto polystyrene (PS) microplastics and we studied the effects of water matrix, solution's pH, salinity, and microplastics' aging on their sorption. According to the results, the sorption of VAL and LOS onto PS is a slow process that reaches equilibrium after 12 days. The sorption of both target micropollutants was pH-dependent and significantly decreased under alkaline conditions. The removal of VAL was enhanced in the presence of 100 mM of Ca²⁺ while no statistical significant effects were observed when Na⁺ was added. The increase of salinity either did not affect or decreased the removal of LOS. Lower sorption of both drugs was observed when aged PS was used despite that the specific surface area for aged PS was 39% higher than pristine. Calculation of the sorption distribution coefficient (K_d) for different water matrices showed that the increase of matrix complexity inhibited target compounds' removal and the sorption rate decreased from bottled water > river water ≈ treated wastewater for the two compounds. For VAL, the K_d values ranged between 795 ± 63 L/kg (bottled water) and 384 ± 88 L/kg (river water), while for LOS between 4453 ± 417 L/kg (bottled water) and 3078 ± 716 L/kg (treated wastewater). Both VAL and LOS sorption onto PS microplastics can be described by hydrophobic and electrostatic interactions. The current results indicate that PS particles could affect the transportation of antihypertensive drugs in the aquatic environment causing potential adverse effects on the environment and public health.

Aqueous aggregation and deposition kinetics of fresh and carboxyl-modified nanoplastics in the presence of divalent heavy metals

The presence of heavy metals alters the colloidal stability and deposition of nanoplastics (NPs) in urban waters. Such processes are important to assess the mobility and fate of NPs and their associated heavy metals. Up to date, few studies have reported the impact of heavy metals on the colloidal behaviors of NPs and the involved mechanisms. In the study, time-resolved dynamic light scattering (DLS) and quartz crystal microbalance with dissipation (QCM-D) methods were used to assess the aggregation and deposition kinetics of polystyrene nanospheres with divalent heavy metals. For comparison, carboxyl-modified polystyrene nanospheres were used. Results reveal that heavy metals destabilized NPs more significantly than calcium ions. Spectroscopy and transmission electron microscopy analysis propose that heavy metals destabilized NPs via inner-sphere coordination with carboxyl groups and cation-π interactions, further leading to the formation of different dimensional aggregates. QCM-D results suggest that the deposition rate, irreversibility, and film compactness of NPs on silica surfaces first increased but further decreased as heavy metal concentration increased. Such deposition behaviors depended on the bridging effects between NPs and silica and aggregation-induced diffusion limitation. In that case, the destabilization and retention ability of heavy metals for NPs were related to their electronegativity and hydration shell thickness. In urban waters, the presence of natural organic matter (NOM) decreased the destabilization and retention ability of heavy metals, whereas heavy metals with environmentally relevant concentrations still enhanced the aggregation and deposition of NPs compared with other environmental cations. This study highlights the impact of heavy metal property on the colloidal behaviors of NPs, thus deepening our understanding of the mobility and fate of NPs associated with heavy metals in urban waters.

Aging of microplastics increases their adsorption affinity towards organic contaminants

When released in the environment, microplastics undergo surface weathering due to mechanical abrasion and ultraviolet exposure. In this study, the adsorption of two model contaminants, phenanthrene and methylene blue, by weathered high density polyethylene (HDPE) and polypropylene (PPE) was evaluated to understand how the microplastics' aging influences contaminant adsorption. Microplastics were aged through an accelerated weathering process using ultraviolet exposure with or without hydrogen peroxide. Adsorption isotherms were conducted for both contaminants on pristine and aged microplastics. The adsorption of organic contaminants was higher on aged microplastics than on pristine ones, with methylene blue having the highest affinity increase with aging at 4.7-fold and phenanthrene having a 1.9-fold increase compared to the pristine particles. To understand the mechanisms involved with higher adsorption of contaminants by aged microplastics, changes in the specific surface area and surface chemistry of aged microplastics were characterized by Fourier Transform Infrared Spectroscopy, X-ray Photoelectron Spectroscopy, zeta potential, X-ray tomography, and Brunauer-Emmett-Teller krypton adsorption analyses. The results of this study show that oxidation of microplastics can enhance the adsorption of organic contaminants, which may increase their role as vectors of contaminants in the aquatic food chain.

Crack Patterns of Environmental Plastic Fragments

Secondary microplastics usually come from the breakdown of larger plastics due to weathering and environmental stress cracking of plastic wastes. In the present study, 5013 plastic fragments were collected from coastal beaches, estuary dikes, and lake banks in China. The fragment sizes ranged from 0.2 to 17.1 cm, and the dominant polymers were polypropylene and polyethylene. Cracks were observed on the surfaces of 49-56% of the fragments. Based on the extracted crack images, we proposed a general crack pattern system including four crack types with specific definitions, abbreviations, and symbols. The two-dimensional spectral analysis of the cracks suggests that the first three patterns showed good regularity and supported the rationality of the pattern system. Some crack metrics (e.g., line density) were closely correlated with the carbonyl index and additives (e.g., phthalate esters) of fragments. For crack investigation in field, we proposed a succinct protocol, in which five crack ranks were established to directly characterize the degree of cracking based on the line density values. The system was successfully applied to distinguish the differences in crack features at two representative sites, which indicates that crack pattern is a useful tool to describe the morphological changes of plastic surfaces in the environment.

Autofluorescence of Model Polyethylene Terephthalate Nanoplastics for Cell Interaction Studies

This work contributes to fill one of the gaps regarding nanoplastic interactions with biological systems by producing polyethylene terephthalate (PET) model nanoplastics, similar to those found in the marine environment, by means of a fast top-down approach based on mechanical fragmentation. Their size distribution and morphology were characterized by laser diffraction and atomic force microscopy (AFM). Their autofluorescence was studied by spectrofluorimetry and fluorescence imaging, being a key property for the evaluation of their interaction with biota. The emission spectra of label-free nanoplastics were comparable with those of PET nanoplastics labeled with Nile red. Finally, the suitability of label-free nanoplastics for biological studies was assessed by in vitro exposure with Mytilus galloprovincialis hemolymphatic cells in a time interval up to 6 h. The nanoplastic internalization into these cells, known to be provided with phagocytic activity, was assessed by fluorescence microscopy. The obtained results underlined that the autofluorescence of the model PET nanoplastics produced in the laboratory was adequate for biological studies having the potential to overcome the disadvantages commonly associated with several fluorescent dyes, such as the tendency to also stain other organic materials different from plastics, to form aggregates due to intermolecular interactions at high concentrations with a consequent decrease in fluorescence intensity, and to dye desorption from nanoparticles. The results of the autofluorescence study provide an innovative approach for plastic risk assessment.

Interactions of microplastics and organic compounds in aquatic environments: A case study of augmented joint toxicity

High levels of persistent contaminants such as microplastics (MPs) and trace organic compounds (TrOCs) in the aquatic environment have become a major threat on the ecosystem and human health. While MP's role as a vector of environmental TrOCs is widely discussed in the literature, the corresponding implications of the interaction between these two compounds on human health (i.e., their joint toxic effect) have not been illustrated. Using a TrOCs model (Triclosan, TCS) and primary MPs (polystyrene microbeads), this work evaluates the sorption and desorption potential of TCS and MPs in simulated environmental and cellular conditions, respectively, and estimates the single and joint toxicity of these interactions toward human cells (Caco-2). Surface functionality of the microbeads highly increased their adsorption capacity of TCS, from 2.3 mg TCS for non-functionalized microbeads to 4.6 mg and 6.1 mg TCS per gram of microbeads for amino- and carboxyl-functionalized MPs, respectively. Using non-functionalized MPs, non-specific "hydrophobic-like" interactions and π-π interactions dominated the sorption mechanism of TCS; however, the addition of hydrogen interactions between functionalized microbeads and TCS increased the microbeads' overall sorption capacity. TCS was desorbed from both functionalized and non-functionalized MPs when changing from environmental conditions to cellular conditions. Desorption was found to be dependent on the matrix complexity and protein content as well as microbead functionality. Finally, toxicity tests suggested that while low concentrations of TCS and MPs (separately) have minor toxic effect toward Caco-2 cells, TCS-sorbed MPs at similar concentrations have an order of magnitude higher toxicity than pristine MPs, potentially associated with the close interaction of both MP and TCS with the cells. Overall, this study not only elucidates the role of MPs as a TrOC vector, but also demonstrates a realistic scenario in which co-presence of these environmental contaminants poses risks to the environment and human health.