Enhancing Extracellular Electron Transfer of Shewanella oneidensis MR-1 through Coupling Improved Flavin Synthesis and Metal-Reducing Conduit for Pollutant Degradation

Enhancing cellulase biosynthesis of Bacillus subtilis Z2 by regulating intracellular NADH level

Optimizing cellulase biosynthesis in Bacillus subtilis is crucial for enhancing enzymatic yield in lignocellulosic biomass conversion. However, the regulatory mechanisms linking intracellular NAD(H/+) levels to cellulase production remain elusive. In this study, we systematically screened 13 genes associated with NAD+ biosynthesis and NADH regeneration in B. subtilis Z2. Employing a modular engineering strategy with four distinct modules, we directed metabolic flux to enhance NAD+ biosynthesis and NADH regeneration. Key genes (ycel, nadV, nadM, mdh, and sucB) were identified, and their co-expression in B. subtilis Z2 resulted in a 13.09-fold increase in intracellular NADH levels and a consequential 2.24- and 2.04-fold enhancement in the filter paper-hydrolyzing (FPase [representing total cellulase]) activity and carboxymethylcellulose (CMCase [representing endoglucanase]) activity, respectively. Experimental validations, including antagonist LaCl3 treatment and spcF gene deletion, unequivocally established the calcium signaling pathway's role in regulating cellulase gene overexpression in response to elevated intracellular NAD(H/+) levels.

Intermittent Microaeration Enhanced Anaerobic Digestion: The Key Role of Fe(III)/Fe(II) Cycle and Reactive Oxygen Species

Microaeration has been reported to improve anaerobic digestion, which is generally attributed to increased microbial diversity, but a thorough explanation is lacking. In this study, it was found that intermittent microaeration (IMA) supplied to an anaerobic digester could oxidize Fe(II) produced by dissimilatory iron reduction (DIR) to form a Fe(III)/Fe(II) cycle and generate extracellular reactive oxygen species (ROS) to improve anaerobic treatment of phenol-containing wastewater. The results showed that compared to the control group without IMA, the removal rates of COD and phenol increased by 29.54 and 49.68 percentage points, respectively, and daily average methane production increased by 85.44%. The Fe(III)/Fe(II) cycle slowed down the loss of iron (13.97%) released from sludge due to the lower solubility of Fe(III) and facilitated •OH generation (1.22 ± 0.04 μM) via Fenton-like reactions. The DIR and the generation of •OH accelerated phenol degradation. Metagenomic analysis revealed that the abundance of methanogens and antioxidant enzymes-encoding genes in response to oxidative stress significantly increased in the IMA group compared to the control, enabling methanogenesis to proceed smoothly under microaeration. This study investigated the extracellular ROS generation induced by microaeration during anaerobic digestion and their roles in promoting anaerobic performance, thereby providing a new perspective for optimizing anaerobic systems with microaeration.

Unlocking the potential of Shewanella in metabolic engineering: Current status, challenges, and opportunities

Shewanella species are facultative anaerobes with distinctive electrochemical properties, making them valuable for applications in energy conversion and environmental bioremediation. Due to their well-characterized electron transfer mechanisms and ease of genetic manipulation, Shewanella spp. have emerged as a promising chassis for metabolic engineering. In this review, we provide a comprehensive overview of the advancements in Shewanella-based metabolic engineering. We begin by discussing the physiological characteristics of Shewanella, with a particular focus on its extracellular electron transfer (EET) capability. Next, we outline the use of Shewanella as a metabolic engineering chassis, presenting a general framework for strain construction based on the Design-Build-Test-Learn (DBTL) cycle and summarizing key advancements in the engineering of Shewanella's metabolic modules. Finally, we offer a perspective on the future development of Shewanella chassis, highlighting the need for deeper mechanistic insights, rational strain design, and interdisciplinary collaboration to drive further progress.

Efficient genetic manipulation of Shewanella through targeting defense islands

The Shewanella genus is widely recognized for its remarkable respiratory adaptability in anaerobic environments, exhibiting potential for bioremediation and microbial fuel cell applications. However, the genetic manipulation of certain Shewanella strains is hindered by defense systems that limit their genetic modification in biotechnology processes. In this study, we present a systematic method for predicting, mapping, and functionally analyzing defense islands within bacterial genomes. We investigated the genetically recalcitrant strain Shewanella putrefaciens CN32 and identified several defense systems located on two genomic islands integrated within the conserved chromosomal genes trmA and trmE. Our experimental assays demonstrated that overexpression of excisionases facilitated the excision of these islands from the chromosome, and their removal significantly enhanced the genetic manipulation efficiency of S. putrefaciens CN32. Further analysis revealed that these defense islands are widespread across various Shewanella strains and other gram-negative bacteria. This study presents an effective strategy to circumvent genetic barriers and fully exploit the potential of Shewanella for environmental and microbial engineering applications.

IMPORTANCE

Efficiently modifying bacterial genomes is critical for advancing their industrial applications. However, bacteria in complex environments naturally develop defense mechanisms in response to bacteriophages and exogenous DNA, which pose significant challenges to their genetic modification. Several methods have emerged to tackle these challenges, including in vitro methylation of plasmid DNA and targeting specific restriction-modification (R-M) and CRISPR loci. Nevertheless, many bacteria harbor multiple, often uncharacterized defense mechanisms, limiting these strategies. Our study differs from previous approaches by specifically targeting defense islands-clusters of defense systems located within mobile genetic elements. Here, we investigated Shewanella putrefaciens CN32 and identified two key defense islands responsible for these protective functions. By selectively deleting these defense islands, we significantly enhanced the efficiency of genetic manipulation in S. putrefaciens. Our findings not only demonstrate a promising strategy for improving genetic engineering in Shewanella but also suggest broader applicability across other bacterial species. This work opens new opportunities for optimizing microbial processes in biotechnology, highlighting the potential of defense island-targeted genetic modification.

A critical review of microbial profiles in black and odorous waters

Black and odorous waters (BOWs) are a serious environmental problem frequently reported over the past few decades. Microorganisms are identified as implementors of the black and odorous phenomenon, which play a crucial role in the decomposition and transformation of pollutants within the BOWs. However, the information on the role of microorganisms in BOWs remains elusive. BOWs are characterized by high concentrations of organic compounds and limited oxygen inputs, which have facilitated the emergence of distinct microbial species. The algae, hydrolytic and fermentative bacterium, sulfate-reducing bacteria, Fe-reducing bacteria and other microorganisms play an important role in the process of blackening and odorization of waters. Studying these specific microbial taxonomies provides valuable insights into their adaptations and contributions to the overall functioning of BOWs. This study comprehensively reviews 1) the microbial community structure, assembly and succession in BOWs; 2) the key microbial profiles involved in BOWs formation; 3) the interspecies interactions process in the BOWs, which are the issues easily overlooked but deserve further research and development.

Extracellular electron transfer-dependent bioremediation of uranium-contaminated groundwater: Advancements and challenges

Efficient and sustainable remediation of uranium-contaminated groundwater is critical for groundwater safety and the sustainable development of nuclear energy, particularly in the context of global carbon neutrality goals. This review explores the potential of microbial reduction processes that utilize extracellular electron transfer (EET) to convert soluble uranium (U(VI)) into its insoluble form (U(IV)), presenting a promising approach to groundwater remediation. The review first outlines the key processes and factors influencing the effectiveness of dissimilatory metal-reducing bacteria (DMRB), such as Geobacter and Shewanella, during uranium bioremediation and recovery. The cutting-edge progress on the molecular mechanism of EET-driven U(VI) reduction mediated by c-type cytochromes, conductive pili, and electron mediators, is critically reviewed. Additionally, advanced strategies such as optimizing electron transfer, leveraging synthetic biology approach, and integration with machine learning are discussed to enhance the efficiency of EET-driven processes. The review also considers the integration of EET processes into practical engineering applications, highlighting the need for optimization and innovation in bioremediation technologies. By providing a comprehensive overview of current progress and challenges, this review aims to inspire novel research and practical advancements in the field of uranium-contaminated groundwater remediation.

Electroactive biofilm communities in microbial fuel cells for the synergistic treatment of wastewater and bioelectricity generation

Increasing industrialization and urbanization have contributed to a significant rise in wastewater discharge and exerted extensive pressure on the existing natural energy resources. Microbial fuel cell (MFC) is a sustainable technology that utilizes wastewater for electricity generation. MFC comprises a bioelectrochemical system employing electroactive biofilms of several aerobic and anaerobic bacteria, such as Geobacter sulfurreducens, Shewanella oneidensis, Pseudomonas aeruginosa, and Ochrobacterum pseudiintermedium. Since the electroactive biofilms constitute a vital part of the MFC, it is crucial to understand the biofilm-mediated pollutant metabolism and electron transfer mechanisms. Engineering electroactive biofilm communities for improved biofilm formation and extracellular polymeric substances (EPS) secretion can positively impact the bioelectrochemical system and improve fuel cell performance. This review article summarizes the role of electroactive bacterial communities in MFC for wastewater treatment and bioelectricity generation. A significant focus has been laid on understanding the composition, structure, and function of electroactive biofilms in MFC. Various electron transport mechanisms, including direct electron transfer (DET), indirect electron transfer (IET), and long-distance electron transfer (LDET), have been discussed. A detailed summary of the optimization of process parameters and genetic engineering strategies for improving the performance of MFC has been provided. Lastly, the applications of MFC for wastewater treatment, bioelectricity generation, and biosensor development have been reviewed.

A universal and wide-range cytosine base editor via domain-inlaid and fidelity-optimized CRISPR-FrCas9

CRISPR-based base editor (BE) offer diverse editing options for genetic engineering of microorganisms, but its application is limited by protospacer adjacent motif (PAM) sequences, context preference, editing window, and off-target effects. Here, a series of iteratively improved cytosine base editors (CBEs) are constructed using the FrCas9 nickase (FrCas9n) with the unique PAM palindromic structure (NNTA) to alleviate these challenges. The deaminase domain-inlaid FrCas9n exhibits an editing range covering 38 nucleotides upstream and downstream of the palindromic PAM, without context preference, which is 6.3 times larger than that of traditional CBEs. Additionally, lower off-target editing is achieved when incorporating high-fidelity mutations at R61A and Q964A in FrCas9n, while maintaining high editing efficiency. The final CBE, HF-ID824-evoCDA-FrCas9n demonstrates broad applicability across different microbes such as Escherichia coli MG1655, Shewanella oneidensis MR-1, and Pseudomonas aeruginosa PAO1. Collectively, this tool offers robust gene editing for facilitating mechanistic studies, functional exploration, and protein evolution in microbes.

Unlocking anaerobic digestion potential via extracellular electron transfer by exogenous materials: Current status and perspectives

The efficiency of energy transfer among microorganisms presents a substantial hurdle for the widespread implementation of anaerobic digestion techniques. Nonetheless, recent studies have demonstrated that enhancing the extracellular electron transfer (EET) can markedly enhance this efficiency. This review highlights recent advancements in EET for anaerobic digestion and examines the contribution of external additives to fostering enhanced efficiency within this context. Diverse mechanisms through which additives are employed to improve EET in anaerobic environments are delineated. Furthermore, specific strategies for effectively regulating EET are proposed, aiming to augment methane production from anaerobic digestion. This review thus offers a perspective on future research directions aimed at optimizing waste resources, enhancing methane production efficiency, and improving process predictability in anaerobic digestion.

Shewanella oneidensis: Biotechnological Application of Metal-Reducing Bacteria

What is an unconventional organism in biotechnology? The γ-proteobacterium Shewanella oneidensis might fall into this category as it was initially established as a laboratory model organism for a process that was not seen as potentially interesting for biotechnology. The reduction of solid-state extracellular electron acceptors such as iron and manganese oxides is highly relevant for many biogeochemical cycles, although it turned out in recent years to be quite relevant for many potential biotechnological applications as well. Applications started with the production of nanoparticles and dramatically increased after understanding that electrodes in bioelectrochemical systems can also be used by these organisms. From the potential production of current and hydrogen in these systems and the development of biosensors, the field expanded to anode-assisted fermentations enabling fermentation reactions that were - so far - dependent on oxygen as an electron acceptor. Now the field expands further to cathode-dependent production routines. As a side product to all these application endeavors, S. oneidensis was understood more and more, and our understanding and genetic repertoire is at eye level to E. coli. Corresponding to this line of thought, this chapter will first summarize the available arsenal of tools in molecular biology that was established for working with the organism and thereafter describe so far established directions of application. Last but not least, we will highlight potential future directions of work with the unconventional model organism S. oneidensis.

Optimizing the Metal Bioreduction Process in Recombinant Shewanella azerbaijanica Bacteria: A Novel Approach via mtrC Gene Cloning and Nitrate-Reducing Pathway Destruction

Environmental pollution is growing every day in terms of the increase in population, industrialization, and urbanization. Shewanella azerbaijanica is introduced as a highly potent bacterium in metal bioremediation. The mtrC gene was selected as a cloning target to improve electron flux chains in the EET (extracellular electron transfer) pathway. Using the SDM (site-directed mutagenesis) technique, the unique gene assembly featured the mtrC gene sandwiched between two napD/B genes to disrupt the nitrate reduction pathway, which serves as the primary metal reduction competitor. Shew-mtrC gene construction was transferred to expression plasmid pET28a (+) in the expression host bacteria (E. coli BL21 and S. azerbaijanica), in pUC57, cloning plasmid, which was transferred to the cloning host bacteria E. coli Top10 and S. azerbaijanica. All cloning procedures (i.e., synthesis, insertion, transformation, cloning, and protein expression) were verified and confirmed by precise tests. ATR-FTIR analysis, CD, western blotting, affinity chromatography, SDS-PAGE, and other techniques were used to confirm the expression and structure of the MtrC protein. The genome sequence and primers were designed according to the submitted Shewanella oneidensis MR-1 genome, the most similar bacteria to this native species. The performance of recombinant S. azerbaijanica bacterium in metal bioremediation, as sustainable strategy, has to be verified by more research.

Boosting bioelectricity generation in bioelectrochemical systems with nitrogen-doped three-dimensional graphene aerogel anode

Bioelectricity generation by electrochemically active bacteria has become particularly appealing due to its vast potential in energy production, pollution treatment, and biosynthesis. However, developing high-performance anodes for bioelectricity generation remains a significant challenge. In this study, a highly efficient three-dimensional nitrogen-doped macroporous graphene aerogel anode with a nitrogen content of approximately 4.38 ± 0.50 at% was fabricated using hydrothermal method. The anode was successfully implemented in bioelectrochemical systems inoculated with Shewanella oneidensis MR-1, resulting in a significantly higher anodic current density (1.0 A/m2) compared to the control one. This enhancement was attributed to the greater biocapacity and improved extracellular electron transfer efficiency of the anode. Additionally, the N-doped aerogel anode demonstrated excellent performance in mixed-culture inoculated bioelectrochemical systems, achieving a high power density of 4.2 ± 0.2 W/m², one of the highest reported for three-dimensional carbon-based bioelectrochemical systems to date. Such improvements are likely due to the good biocompatibility of the N-doped aerogel anode, increased extracellular electron transfer efficiency at the bacteria/anode interface, and selectively enrichment of electroactive Geobacter soli within the NGA anode. Furthermore, based on gene-level Picrust2 prediction results, N-doping significantly upregulated the conductive pili-related genes of Geobacter in the three-dimensional anode, increasing the physical connection channels of bacteria, and thus strengthening the extracellular electron transfer process in Geobacter.

Review of cathodic electroactive bacteria: Species, properties, applications and electron transfer mechanisms

Cathodic electroactive bacteria (C-EAB) which are capable of accepting electrons from solid electrodes provide fresh avenues for pollutant removal, biosensor design, and electrosynthesis. This review systematically summarized the burgeoning applications of the C-EAB over the past decade, including 1) removal of nitrate, aromatic derivatives, and metal ions; 2) biosensing based on biocathode; 3) electrosynthesis of CH4, H2, organic carbon, NH3, and protein. In addition, the mechanisms of electron transfer by the C-EAB are also classified and summarized. Extracellular electron transfer and interspecies electron transfer have been introduced, and the electron transport mechanism of typical C-EAB, such as Shewanella oneidensis MR-1, has been combed in detail. By bringing to light this cutting-edge area of the C-EAB, this review aims to stimulate more interest and research on not only exploring great potential applications of these electron-accepting bacteria, but also developing steady and scalable processes harnessing biocathodes.

High power density redox-mediated Shewanella microbial flow fuel cells

Microbial fuel cells utilize exoelectrogenic microorganisms to directly convert organic matter into electricity, offering a compelling approach for simultaneous power generation and wastewater treatment. However, conventional microbial fuel cells typically require thick biofilms for sufficient metabolic electron production rate, which inevitably compromises mass and charge transport, posing a fundamental tradeoff that limits the achievable power density (<1 mW cm-2). Herein, we report a concept for redox-mediated microbial flow fuel cells that utilizes artificial redox mediators in a flowing medium to efficiently transfer metabolic electrons from planktonic bacteria to electrodes. This approach effectively overcomes mass and charge transport limitations, substantially reducing internal resistance. The biofilm-free microbial flow fuel cell thus breaks the inherent tradeoff in dense biofilms, resulting in a maximum current density surpassing 40 mA cm-2 and a highest power density exceeding 10 mW cm-2, approximately one order of magnitude higher than those of state-of-the-art microbial fuel cells.

Distinct influence of model electron shuttles on anaerobic mononitrophenols reduction in aquatic environments by Shewanella oneidensis MR-1

The environmental fate and risks of mononitrophenols (mono-NPs), the simplest nitrophenols (NPs) often found in aquatic environments, are profoundly influenced by anaerobic bioreduction and co-existing electron shuttles (ESs), but little is known about the underlying mechanisms. Here, we elucidate the pathways of anaerobic mono-NPs bioreduction by Shewanella oneidensis MR-1 and assess the effect of model ESs on these processes. We found that all three mono-NPs isomers could be readily reduced to their corresponding aminophenols by S. oneidensis MR-1 under anaerobic conditions. CymA, a core component of the Mtr respiratory pathway, performs a dynamic role in these bioreduction, which is highly dependent on the bioreduction kinetics. The exogenous addition of quinones was found to accelerate the mono-NPs bioreduction through interactions with key outer-membrane proteins (e.g., OmcA and MtrC), and all these processes matched well to linear free energy relationships (LFERs). Surprisingly, adding riboflavin did not influence the bioreduction of all three mono-NPs isomers, which may be due to the contribution of OmcA and MtrC to these bioreduction processes and their downregulated expression. This study enhances our understanding of the environmental fate of mono-NPs and their bioconversion processes, providing valuable insights for the bioremediation of nitrophenol-contaminated sites.

3D Bioprinting of Engineered Living Materials with Extracellular Electron Transfer Capability for Water Purification

Attention is widely drawn to the extracellular electron transfer (EET) process of electroactive bacteria (EAB) for water purification, but its efficacy is often hindered in complex environmental matrices. In this study, the engineered living materials with EET capability (e-ELMs) were for the first time created with customized geometric configurations for pollutant removal using three-dimensional (3D) bioprinting platform. By combining EAB and tailored viscoelastic matrix, a biocompatible and tunable electroactive bioink for 3D bioprinting was initially developed with tuned rheological properties, enabling meticulous manipulation of microbial spatial arrangement and density. e-ELMs with different spatial microstructures were then designed and constructed by adjusting the filament diameter and orientation during the 3D printing process. Simulations of diffusion and fluid dynamics collectively showcase internal mass transfer rates and EET efficiency of e-ELMs with different spatial microstructures, contributing to the outstanding decontamination performances. Our research propels 3D bioprinting technology into the environmental realm, enabling the creation of intricately designed e-ELMs and providing promising routes to address the emerging water pollution concerns.

Role of the cathode chamber in microbial electrosynthesis: A comprehensive review of key factors

The consumption of non-renewable fossil fuels has directly contributed to a dramatic rise in global carbon dioxide (CO2) emissions, posing an ongoing threat to the ecological security of the Earth. Microbial electrosynthesis (MES) is an innovative energy regeneration strategy that offers a gentle and efficient approach to converting CO2 into high-value products. The cathode chamber is a vital component of an MES system and its internal factors play crucial roles in improving the performance of the MES system. Therefore, this review aimed to provide a detailed analysis of the key factors related to the cathode chamber in the MES system. The topics covered include inward extracellular electron transfer pathways, cathode materials, applied cathode potentials, catholyte pH, and reactor configuration. In addition, this review analyzes and discusses the challenges and promising avenues for improving the conversion of CO2 into high-value products via MES.

Novel Insights on Extracellular Electron Transfer Networks in the Desulfovibrionaceae Family: Unveiling the Potential Significance of Horizontal Gene Transfer

Some sulfate-reducing bacteria (SRB), mainly belonging to the Desulfovibrionaceae family, have evolved the capability to conserve energy through microbial extracellular electron transfer (EET), suggesting that this process may be more widespread than previously believed. While previous evidence has shown that mobile genetic elements drive the plasticity and evolution of SRB and iron-reducing bacteria (FeRB), few have investigated the shared molecular mechanisms related to EET. To address this, we analyzed the prevalence and abundance of EET elements and how they contributed to their differentiation among 42 members of the Desulfovibrionaceae family and 23 and 59 members of Geobacteraceae and Shewanellaceae, respectively. Proteins involved in EET, such as the cytochromes PpcA and CymA, the outer membrane protein OmpJ, and the iron-sulfur cluster-binding CbcT, exhibited widespread distribution within Desulfovibrionaceae. Some of these showed modular diversification. Additional evidence revealed that horizontal gene transfer was involved in the acquiring and losing of critical genes, increasing the diversification and plasticity between the three families. The results suggest that specific EET genes were widely disseminated through horizontal transfer, where some changes reflected environmental adaptations. These findings enhance our comprehension of the evolution and distribution of proteins involved in EET processes, shedding light on their role in iron and sulfur biogeochemical cycling.

Microalgal extracellular polymeric substances (EPS) and their roles in cultivation, biomass harvesting, and bioproducts extraction

Microalgae extracellular polymeric substances (EPS) are complex high-molecular-weight polymers and the physicochemical properties of EPS strongly affect the core features of microalgae cultivation and resource utilization. Revealing the key roles of EPS in microalgae life-cycle processes in an interesting and novelty topic to achieve energy-efficient practical application of microalgae. This review found that EPS showed positive effect in non-gas uptake, extracellular electron transfer, toxicity resistance and heterotrophic symbiosis, but negative impact in gas transfer and light utilization during microalgae cultivation. For biomass harvesting, EPS favored biomass flocculation and large-size cell self-flocculation, but unfavored small size microalgae self-flocculation, membrane filtration, charge neutralization and biomass dewatering. During bioproducts extraction, EPS exhibited positive impact in extractant uptake, but the opposite effect in cellular membrane permeability and cell rupture. Future research on microalgal EPS were also identified, which offer suggestions for comprehensive understanding of microalgal EPS roles in various scenarios.

Biofilms for Production of Chemicals and Energy

The twenty-first century will be the century of biology. This is not only because of breakthrough advances in molecular biology tools but also because we need to reinvent our economy based on the biological principles of energy efficiency and sustainability. Consequently, new tools for production routines must be developed to help produce platform chemicals and energy sources based on sustainable resources. In this context, biofilm-based processes have the potential to impact future production processes, because they can be carried out continuously and with robust stationary biocatalysts embedded in an extracellular matrix with different properties. We review productive biofilm systems used for heterotrophic and lithoautotrophic production and attempt to identify fundamental reasons why they may be particularly suitable as future production systems.

Efficient Enhancement of Extracellular Electron Transfer in Shewanella oneidensis MR-1 via CRISPR-Mediated Transposase Technology

Electroactive bacteria, exemplified by Shewanella oneidensis MR-1, have garnered significant attention due to their unique extracellular electron-transfer (EET) capabilities, which are crucial for energy recovery and pollutant conversion. However, the practical application of MR-1 is constrained by its EET efficiency, a key limiting factor, due to the complexity of research methodologies and the challenges associated with the practical use of gene editing tools. To address this challenge, a novel gene integration system, INTEGRATE, was developed, utilizing CRISPR-mediated transposase technologies for precise genomic insertion within the S. oneidensis MR-1 genome. This system facilitated the insertion of extensive gene segments at different sites of the Shewanella genome with an efficiency approaching 100%. The inserted cargo genes could be kept stable on the genome after continuous cultivation. The enhancement of the organism's EET efficiency was realized through two primary strategies: the integration of the phenazine-1-carboxylic acid synthesis gene cluster to augment EET efficiency and the targeted disruption of the SO3350 gene to promote anodic biofilm development. Collectively, our findings highlight the potential of utilizing the INTEGRATE system for strategic genomic alterations, presenting a synergistic approach to augment the functionality of electroactive bacteria within bioelectrochemical systems.

Riboflavin modified carbon cloth enhances anaerobic digestion treating food waste in a pilot-scale system

Previous laboratory-scale studies have consistently shown that carbon-based conductive materials can notably improve the anaerobic digestion of food waste, typically employing reactors with regular capacity of 1-20 L. Furthermore, incorporating riboflavin-loaded conductive materials can further address the imbalance between fermentation and methanogenesis in anaerobic systems. However, there have been few reports on pilot-scale investigation. In this study, a 10 m2 of riboflavin modified carbon cloth was incorporated into a pilot-scale (2 m3) food waste anaerobic reactor to improve its treatment efficiency. The study found that the addition of riboflavin-loaded carbon cloth can increase the maximum organic loading rate (OLR) by 40% of the pilot-scale reactor, compared to the system using carbon cloth without riboflavin loading, while ensuring efficient operation of the reaction system, effectively alleviating system acidification, sustaining methanogen activity, and increasing daily methane production by 25%. Analysis of the microbial community structure revealed that riboflavin-loaded carbon cloth enriched the methanogenic archaea in the genera of Methanothrix and Methanobacterium, which are capable of extracellular direct interspecies electron transfer (DIET). And metabolic pathway analysis identified the methane production pathway, highly enriched on the reduction of acetic acid and CO2 at riboflavin-loaded carbon cloth sample. The expression levels of genes related to methane production via DIET pathway were also significantly upregulated. These results can provide important guidance for the practical application of food waste anaerobic digestion engineering.

Enhancing biohydrogen production from xylose through natural FeS2 ore: Mechanistic insights

In this study, we investigated the advantages of utilizing natural FeS2 ore in the context of dark fermentative hydrogen production within a fermentation system employing heat-treated anaerobic granular sludge with xylose as the carbon source. The results demonstrated a significant improvement in both hydrogen production and the maximum rate, with increases of 2.58 and 4.2 times, respectively. Moreover, the presence of FeS2 ore led to a reduction in lag time by more than 2-3 h. The enhanced biohydrogen production performance was attributed to factors such as the intracellular NADH/NAD+ ratio, redox-active components of extracellular polymeric substances, secreted flavins, as well as the presence of hydrogenase and nitrogenase. Furthermore, the FeS2 ore served as a direct electron donor and acceptor during biohydrogen production. This study shed light on the underlying mechanisms contributing to the improved performance of biohydrogen production from xylose during dark fermentation through the supplementation of natural FeS2 ore.

Metabolic engineering strategies to enable microbial electrosynthesis utilization of CO2: recent progress and challenges

Microbial electrosynthesis (MES) is a promising technology that mainly utilizes microbial cells to convert CO2 into value-added chemicals using electrons provided by the cathode. However, the low electron transfer rate is a solid bottleneck hindering the further application of MES. Thus, as an effective strategy, genetic tools play a key role in MES for enhancing the electron transfer rate and diversity of production. We describe a set of genetic strategies based on fundamental characteristics and current successes and discuss their functional mechanisms in driving microbial electrocatalytic reactions to fully comprehend the roles and uses of genetic tools in MES. This paper also analyzes the process of nanomaterial application in extracellular electron transfer (EET). It provides a technique that combines nanomaterials and genetic tools to increase MES efficiency, because nanoparticles have a role in the production of functional genes in EET although genetic tools can subvert MES, it still has issues with difficult transformation and low expression levels. Genetic tools remain one of the most promising future strategies for advancing the MES process despite these challenges.

The promotion of the atrazine degradation mechanism by humic acid in a soil microbial electrochemical system

The enhancing effects of anodes on the degradation of the organochlorine pesticide atrazine (ATR) in soil within microbial electrochemical systems (MES) have been extensively researched. However, the impact and underlying mechanisms of soil microbial electrochemical systems (MES) on ATR degradation, particularly under conditions involving the addition of humic acids (HAs), remain elusive. In this investigation, a soil MES supplemented with humic acids (HAs) was established to assess the promotional effects and mechanisms of HAs on ATR degradation, utilizing EEM-PARAFAC and SEM analyses. Results revealed that the maximum power density of the MES in soil increased by 150%, and the degradation efficiency of ATR improved by over 50% following the addition of HAs. Furthermore, HAs were found to facilitate efficient ATR degradation in the far-anode region by mediating extracellular electron transfer. The components identified as critical in promoting ATR degradation were Like-Protein and Like-Humic acid substances. Analysis of the microbial community structure indicated that the addition of HAs favored the evolution of the soil MES microbial community and the enrichment of electroactive microorganisms. In the ATR degradation process, the swift accumulation of Hydrocarbyl ATR (HYA) was identified as the primary cause for the rapid degradation of ATR in electron-rich conditions. Essentially, HA facilitates the reduction of ATR to HYA through mediated bonded electron transfer, thereby markedly enhancing the efficiency of ATR degradation.

Engineering extracellular electron transfer pathways of electroactive microorganisms by synthetic biology for energy and chemicals production

The excessive consumption of fossil fuels causes massive emission of CO2, leading to climate deterioration and environmental pollution. The development of substitutes and sustainable energy sources to replace fossil fuels has become a worldwide priority. Bio-electrochemical systems (BESs), employing redox reactions of electroactive microorganisms (EAMs) on electrodes to achieve a meritorious combination of biocatalysis and electrocatalysis, provide a green and sustainable alternative approach for bioremediation, CO2 fixation, and energy and chemicals production. EAMs, including exoelectrogens and electrotrophs, perform extracellular electron transfer (EET) (i.e., outward and inward EET), respectively, to exchange energy with the environment, whose rate determines the efficiency and performance of BESs. Therefore, we review the synthetic biology strategies developed in the last decade for engineering EAMs to enhance the EET rate in cell-electrode interfaces for facilitating the production of electricity energy and value-added chemicals, which include (1) progress in genetic manipulation and editing tools to achieve the efficient regulation of gene expression, knockout, and knockdown of EAMs; (2) synthetic biological engineering strategies to enhance the outward EET of exoelectrogens to anodes for electricity power production and anodic electro-fermentation (AEF) for chemicals production, including (i) broadening and strengthening substrate utilization, (ii) increasing the intracellular releasable reducing equivalents, (iii) optimizing c-type cytochrome (c-Cyts) expression and maturation, (iv) enhancing conductive nanowire biosynthesis and modification, (v) promoting electron shuttle biosynthesis, secretion, and immobilization, (vi) engineering global regulators to promote EET rate, (vii) facilitating biofilm formation, and (viii) constructing cell-material hybrids; (3) the mechanisms of inward EET, CO2 fixation pathway, and engineering strategies for improving the inward EET of electrotrophic cells for CO2 reduction and chemical production, including (i) programming metabolic pathways of electrotrophs, (ii) rewiring bioelectrical circuits for enhancing inward EET, and (iii) constructing microbial (photo)electrosynthesis by cell-material hybridization; (4) perspectives on future challenges and opportunities for engineering EET to develop highly efficient BESs for sustainable energy and chemical production. We expect that this review will provide a theoretical basis for the future development of BESs in energy harvesting, CO2 fixation, and chemical synthesis.

Mechanism of Cr(VI) bioreduction by Clostridium sp. LQ25 under Fe(III) reducing conditions

The Cr(VI) bioreduction has attracted widespread attention in the field of Cr(VI) pollution remediation due to its environmental friendliness. Further in-depth research on the reduction mechanisms is necessary to enhance the efficiency of Cr(VI) bioreduction. However, the limited research on Cr(VI) bioreduction mechanisms remains a bottleneck for the practical application of Cr(VI) reduction. In this study, The Cr(VI) reduction of strain LQ25 was significantly improved when Fe(III) was used as an electron acceptor, which increased by 1.6-fold maximum within the set Cr(VI) concentration range. Based on this, the electron transfer process of Cr(VI) reduction was analyzed using strain LQ25. Based on genomic data, flavin proteins were found to interact closely with electron transfer-related proteins using protein-protein interaction (PPi) analysis. Transcriptome analysis revealed that flavin synthesis genes (ribE, ribBA, and ribH) and electron transfer flavoprotein genes (fixA, etfA, fixB, and etfB) were significantly upregulated when Fe(III) was used as the electron acceptor. These results indicate that the fermentative dissimilatory Fe(III)-reducing bacterial strain LQ25 mainly uses flavin as an electron shuttle for electron transfer, which differs from the common use of cytochrome c in respiratory bacteria. These findings on the mechanism of Cr(VI) bioreduction provide technical support for improving the efficiency of Cr(VI) reduction which promote the practical application of Cr(VI) bioreduction in the field of Cr(VI) pollution remediation.

Anaerobic ammonium oxidation coupled to iron(III) reduction catalyzed by a lithoautotrophic nitrate-reducing iron(II) oxidizing enrichment culture

The last two decades have seen nitrogen/iron-transforming bacteria at the forefront of new biogeochemical discoveries, such as anaerobic ammonium oxidation coupled to ferric iron reduction (feammox) and lithoautotrophic nitrate-reducing ferrous iron-oxidation (NRFeOx). These emerging findings continue to expand our knowledge of the nitrogen/iron cycle in nature and also highlight the need to re-understand the functional traits of the microorganisms involved. Here, as a proof-of-principle, we report compelling evidence for the capability of an NRFeOx enrichment culture to catalyze the feammox process. Our results demonstrate that the NRFeOx culture predominantly oxidizes NH4+ to nitrogen gas, by reducing both chelated nitrilotriacetic acid (NTA)-Fe(III) and poorly soluble Fe(III)-bearing minerals (γ-FeOOH) at pH 4.0 and 8.0, respectively. In the NRFeOx culture, Fe(II)-oxidizing bacteria of Rhodanobacter and Fe(III)-reducing bacteria of unclassified_Acidobacteriota coexisted. Their relative abundances were dynamically regulated by the supplemented iron sources. Metagenomic analysis revealed that the NRFeOx culture contained a complete set of denitrifying genes along with hao genes for ammonium oxidation. Additionally, numerous genes encoding extracellular electron transport-associated proteins or their homologs were identified, which facilitated the reduction of extracellular iron by this culture. More broadly, this work lightens the unexplored potential of specific microbial groups in driving nitrogen transformation through multiple pathways and highlights the essential role of microbial iron metabolism in the integral biogeochemical nitrogen cycle.

Enhanced azo dye reduction at semiconductor-microbe interface: The key role of semiconductor band structure

Low-energy environmental remediation could be achieved by biocatalysis with assistance of light-excited semiconductor, in which the energy band structure of semiconductor has a significant influence on the metabolic process and electron transfer of microbes. In this study, direct Z-scheme and type II heterojunction semiconductor with different energy band structure were successfully synthesized for constructing semiconductor-microbe interface with Shewanella oneidensis MR-1 to achieve acid orange7 (AO7) biodegradation. UV-vis diffuse reflection spectroscopy, photoluminescence spectra and photoelectrochemical analysis revealed that the direct Z-scheme heterojunction semiconductor had stronger reduction power and faster separation of photoelectron-hole, which was beneficial for the AO7 biodegradation at semiconductor-microbe interface. Riboflavin was also involved in electron transfer between the semiconductor and microbes during AO7 reduction. Transcriptome results illustrated that functional gene expression of Shewanella oneidensis MR-1 was upregulated significantly with photo-stimulation of direct Z-scheme semiconductor, and Mtr pathway and conductive pili played the important roles in the photoelectron utilization by Shewanella oneidensis MR-1. This work is expected to provide alternative ideas for designing semiconductor-microbial interface with efficient electron transfer and broadening their applications in bioremediation.

Mechanism and applications of bidirectional extracellular electron transfer of Shewanella

Electrochemically active microorganisms (EAMs) play an important role in the fields of environment and energy. Shewanella is the most common EAM. Research into Shewanella contributes to a deeper comprehension of EAMs and expands practical applications. In this review, the outward and inward extracellular electron transfer (EET) mechanisms of Shewanella are summarized and the roles of riboflavin in outward and inward EET are compared. Then, four methods for the enhancement of EET performance are discussed, focusing on riboflavin, intracellular reducing force, biofilm formation and substrate spectrum, respectively. Finally, the applications of Shewanella in the environment are classified, and the restrictions are discussed. Potential solutions and promising prospects for Shewanella are also provided.

Mechanism and application of modified bioelectrochemical system anodes made of carbon nanomaterial for the removal of heavy metals from soil

Bioelectrochemical techniques are quick, efficient, and sustainable alternatives for treating heavy metal soils. The use of carbon nanomaterials in combination with electroactive microorganisms can create a conductive network that mediates long-distance electron transfer in an electrode system, thereby resolving the issue of low electron transfer efficiency in soil remediation. As a multifunctional soil heavy metal remediation technology, its application in organic remediation has matured, and numerous studies have demonstrated its potential for soil heavy metal remediation. This is a ground-breaking method for remediating soils polluted with high concentrations of heavy metals using soil microbial electrochemistry. This review summarizes the use of bioelectrochemical systems with modified anode materials for the remediation of soils with high heavy metal concentrations by discussing the mass-transfer mechanism of electrochemically active microorganisms in bioelectrochemical systems, focusing on the suitability of carbon nanomaterials and acidophilic bacteria. Finally, we discuss the emerging limitations of bioelectrochemical systems, and future research efforts to improve their performance and facilitate practical applications. The mass-transfer mechanism of electrochemically active microorganisms in bioelectrochemical systems emphasizes the suitability of carbon nanomaterials and acidophilic bacteria for remediating soils polluted with high concentrations of heavy metals. We conclude by discussing present and future research initiatives for bioelectrochemical systems to enhance their performance and facilitate practical applications. As a result, this study can close any gaps in the development of bioelectrochemical systems and guide their practical application in remediating heavy-metal-contaminated soils.

Advancing understanding of microbial biofilms through machine learning-powered studies

Microbial biofilms are prevalent in various environments and pose significant challenges to food safety and public health. The biofilms formed by pathogens can cause food spoilage, foodborne illness, and infectious diseases, which are difficult to treat due to their enhanced antimicrobial resistance. While the composition and development of biofilms have been widely studied, their profound impact on food, the food industry, and public health has not been sufficiently recapitulated. This review aims to provide a comprehensive overview of microbial biofilms in the food industry and their implication on public health. It highlights the existence of biofilms along the food-producing chains and the underlying mechanisms of biofilm-associated diseases. Furthermore, this review thoroughly summarizes the enhanced understanding of microbial biofilms achieved through machine learning approaches in biofilm research. By consolidating existing knowledge, this review intends to facilitate developing effective strategies to combat biofilm-associated infections in both the food industry and public health.

Genome Sequence of a Heavy Metal-Detoxifying Actinomycete, Microbacterium proteolyticum ustc

A complete genome is presented for Microbacterium proteolyticum ustc, a member of the Gram-positive order Micrococcales of the phylum Actinomycetota that is resistant to high concentrations of heavy metals and participates in metal detoxification. The genome consists of one plasmid and one chromosome.

Goethite Formed in the Periplasmic Space of Pseudomonas sp. JM-7 during Fe Cycling Enhances Its Denitrification in Water

Denitrification-driven Fe(II) oxidation is an important microbial metabolism that connects iron and nitrogen cycling in the environment. The formation of Fe(III) minerals in the periplasmic space has a significant effect on microbial metabolism and electron transfer, but direct evidence of iron ions entering the periplasm and resulting in periplasmic mineral precipitation and electron conduction properties has yet to be conclusively determined. Here, we investigated the pathways and amounts of iron, with different valence states and morphologies, entering the periplasmic space of the denitrifier Pseudomonas sp. JM-7 (P. JM-7), and the possible effects on the electron transfer and the denitrifying ability. When consistently provided with Fe(II) ions (from siderite (FeCO3)), the dissolved Fe(II) ions entered the periplasmic space and were oxidized to Fe(III), leading to the formation of a 25 nm thick crystalline goethite crust, which functioned as a semiconductor, accelerating the transfer of electrons from the intracellular to the extracellular matrix. This consequently doubled the denitrification rate and increased the electron transport capacity by 4-30 times (0.015-0.04 μA). However, as the Fe(II) concentration further increased to above 4 mM, the Fe(II) ions tended to preferentially nucleate, oxidize, and crystallize on the outer surface of P. JM-7, leading to the formation of a densely crystallized goethite layer, which significantly slowed down the metabolism of P. JM-7. In contrast to the Fe(II) conditions, regardless of the initial concentration of Fe(III), it was challenging for Fe(III) ions to form goethite in the periplasmic space. This work has shed light on the likely effects of iron on environmental microorganisms, improved our understanding of globally significant iron and nitrogen geochemical cycles in water, and expanded our ability to study and control these important processes.

Self-purification of actual wastewater via microbial-synergy driving of catalyst-surface microelectronic field: A pilot-scale study

High energy consumption is impedimental for eliminating refractory organics in wastewater by current technologies. Herein, we develop an efficient self-purification process for actual non-biodegradable dyeing wastewater at pilot scale, using N-doped graphene-like (CN) complexed Cu-Al₂O₃ supported Al₂O₃ ceramics (HCLL-S8-M) fixed-bed reactor without additional input. About 36% chemical oxygen demand removal was achieved within 20 min empty bed retention time and maintained stability for almost one year. The HCLL-S8-M structure feature and its interface on microbial community structure, functions, and metabolic pathways were analyzed by density-functional theory calculation, X-ray photoelectron spectroscopy, multiomics analysis of metagenome, macrotranscriptome and macroproteome. On the surface of HCLL-S8-M, a strong microelectronic field (MEF) was formed by the electron-rich/poor area due to Cu-π interaction from the complexation between phenolic hydroxy of CN and Cu species, driving the electrons of the adsorbed dye pollutants to the microorganisms through extracellular polymeric substance and the direct transfer of extracellular electrons, causing their degradation into CO₂ and intermediates, which was degraded partly via intracellular metabolism. The lower energy feeding for the microbiome produced less adenosine triphosphate, resulting in little sludge throughout reaction. The MEF from electronic polarization is greatly potential to develop low-energy wastewater treatment technology.

Evidence for the feasibility of transmembrane proton gradient regulating oxytetracycline extracellular biodegradation mediated by biosynthesized palladium nanoparticles

Extracellular biodegradation is a promising technology for removing antibiotics and repressing the spread of resistance genes, but the strategy is limited by the low extracellular electron transfer (EET) efficiency of microorganisms. In this work, biogenic Pd⁰ nanoparticles (bio-Pd⁰) were introduced in cells in situ to enhance oxytetracycline (OTC) extracellular degradation and the effects of transmembrane proton gradient (TPG) on EET and energy metabolism mediated by bio-Pd⁰ were investigated. The results indicated that the intracellular OTC concentration gradually decreased with increase in pH due to the simultaneous decreases of OTC adsorption and TPG-dependent OTC uptake. On the contrary, the efficiency of OTC biodegradation mediated by bio-Pd⁰@B. megaterium showed a pH-dependent increase. The negligible intracellular OTC degradation, the high dependence of OTC biodegradation on respiration chain and the results on enzyme activity and respiratory chain inhibition experiments showed that NADH-dependent (rather than FADH₂-dependent) EET process mediated by substrate-level phosphorylation modulated OTC biodegradation due to high energy storage and proton translocation capacity. Moreover, the results showed that altering TPG is an efficient approach to improve EET efficiency, which can be attributed to the increased NADH generation by the TCA cycle, enhanced transmembrane electron output efficiency (as evidenced by increased intracellular electron transfer system (IETS) activity, the negative shift of onset potential, and enhanced one-electron transfer through bound flavin) and stimulation of substrate-level phosphorylation energy metabolism catalyzed by succinic thiokinase (STH) under low TPG conditions. The results of structural equation model that OTC biodegradation was directly and positively modulated by the net outward proton flux as well as STH activity, and indirectly regulated by TPG through NADH level and IETS activity confirmed the previous findings. This study provides a new perspective for engineering microbial EET and application of bioelectrochemistry processes in bioremediation.

Advances in mechanisms and engineering of electroactive biofilms

Electroactive biofilms (EABs) are electroactive microorganisms (EAMs) encased in conductive polymers that are secreted by EAMs and formed by the accumulation and cross-linking of extracellular polysaccharides, proteins, nucleic acids, lipids, and other components. EABs are present in the form of multicellular aggregates and play a crucial role in bioelectrochemical systems (BESs) for diverse applications, including biosensors, microbial fuel cells for renewable bioelectricity production and remediation of wastewaters, and microbial electrosynthesis of valuable chemicals. However, naturally occurred EABs are severely limited owing to their low electrical conductivity that seriously restrict the electron transfer efficiency and practical applications. In the recent decade, synthetic biology strategies have been adopted to elucidate the regulatory mechanisms of EABs, and to enhance the formation and electrical conductivity of EABs. Based on the formation of EABs and extracellular electron transfer (EET) mechanisms, the synthetic biology-based engineering strategies of EABs are summarized and reviewed as follows: (i) Engineering the structural components of EABs, including strengthening the synthesis and secretion of structural elements such as polysaccharides, eDNA, and structural proteins, to improve the formation of biofilms; (ii) Enhancing the electron transfer efficiency of EAMs, including optimizing the distribution of c-type cytochromes and conducting nanowire assembly to promote contact-based EET, and enhancing electron shuttles' biosynthesis and secretion to promote shuttle-mediated EET; (iii) Incorporating intracellular signaling molecules in EAMs, including quorum sensing systems, secondary messenger systems, and global regulatory systems, to increase the electron transfer flux in EABs. This review lays a foundation for the design and construction of EABs for diverse BES applications.

Mechano-control of Extracellular Electron Transport Rate via Modification of Inter-heme Coupling in Bacterial Surface Cytochrome

Bacterial outer-membrane multi-heme cytochromes (OMCs) mediate extracellular electron transport (EET). While heme alignment dictates the rate of EET, control of inter-heme coupling in a single OMC remains challenging, especially in intact cells. Given that OMCs diffuse and collide without aggregation on the cell surface, the overexpression of OMCs could increase such mechanical stress to impact the OMCs' protein structure. Here, the heme coupling is modified via mechanical interactions among OMCs by controlling their concentrations. Employment of whole-cell circular dichroism (CD) spectra of genetically engineered Escherichia coli reveals that the OMC concentration significantly impacts the molar CD and redox property of OMCs, resulting in a 4-fold change of microbial current production. The overexpression of OMCs increased the conductive current across the biofilm on an interdigitated electrode, indicating that a higher concentration of OMCs causes more lateral inter-protein electron hopping via collision on the cell surface. The present study would open a novel strategy to increase microbial current production by mechanically enhancing the inter-heme coupling.

The material-microorganism interface in microbial hybrid electrocatalysis systems

This review presents a comprehensive summary of the material-microorganism interface in microbial hybrid electrocatalysis systems. Microbial hybrid electrocatalysis has been developed to combine the advantages of inorganic electrocatalysis and microbial catalysis. However, electron transfer at the interfaces between microorganisms and materials is a very critical issue that affects the efficiency of the system. Therefore, this review focuses on the electron transfer at the material-microorganism interface and the strategies for building efficient microorganism and material interfaces. We begin with a brief introduction of the electron transfer mechanism in both the bioanode and biocathode of bioelectrochemical systems to understand the material-microorganism interface. Next, we summarise the strategies for constructing efficient material-microorganism interfaces including material design and modification and bacterial engineering. We also discuss emerging studies on the bio-inorganic hybrid electrocatalysis system. Understanding the interface between electrode/active materials and the microorganisms, especially the electron transfer processes, could help to drive the evolution of material-microorganism hybrid electrocatalysis systems towards maturity.

Moving towards the enhancement of extracellular electron transfer in electrogens

Electrogens are very common in nature and becoming a contemporary theme for research as they can be exploited for extracellular electron transfer. Extracellular electron transfer is the key mechanism behind bioelectricity generation and bioremediation of pollutants via microbes. Extracellular electron transfer mechanisms for electrogens other than Shewanella and Geobacter are less explored. An efficient extracellular electron transfer system is crucial for the sustainable future of bioelectrochemical systems. At present, the poor extracellular electron transfer efficiency remains a decisive factor in limiting the development of efficient bioelectrochemical systems. In this review article, the EET mechanisms in different electrogens (bacteria and yeast) have been focused. Apart from the well-known electron transfer mechanisms of Shewanella oneidensis and Geobacter metallireducens, a brief introduction of the EET pathway in Rhodopseudomonas palustris TIE-1, Sideroxydans lithotrophicus ES-1, Thermincola potens JR, Lysinibacillus varians GY32, Carboxydothermus ferrireducens, Enterococcus faecalis and Saccharomyces cerevisiae have been included. In addition to this, the article discusses the several approaches to anode modification and genetic engineering that may be used in order to increase the rate of extracellular electron transfer. In the side lines, this review includes the engagement of the electrogens for different applications followed by the future perspective of efficient extracellular electron transfer.

Systematic Full-Cycle Engineering Microbial Biofilms to Boost Electricity Production in Shewanella oneidensis

Electroactive biofilm plays a crucial rule in the electron transfer efficiency of microbial electrochemical systems (MES). However, the low ability to form biofilm and the low conductivity of the formed biofilm substantially limit the extracellular electron transfer rate of microbial cells to the electrode surfaces in MES. To promote biofilm formation and enhance biofilm conductivity, we develop synthetic biology approach to systematically engineer Shewanella oneidensis, a model exoelectrogen, via modular manipulation of the full-cycle different stages of biofilm formation, namely, from initial contact, cell adhesion, and biofilm growth stable maturity to cell dispersion. Consequently, the maximum output power density of the engineered biofilm reaches 3.62 ± 0.06 W m-2, 39.3-fold higher than that of the wild-type strain of S. oneidensis, which, to the best our knowledge, is the highest output power density that has ever been reported for the biofilms of the genetically engineered Shewanella strains.

Heavy-metal resistant bio-hybrid with biogenic ferrous sulfide nanoparticles: pH-regulated self-assembly and wastewater treatment application

Self-assembled bio-hybrids with biogenic ferrous sulfide nanoparticles (bio-FeS) on the cell surface are attractive for reduction of toxic heavy metals due to higher activity than bare bacteria, but they still suffer from slow synthesis and regeneration of bio-FeS and bacterial activity decay for removal of high-concentration heavy metals. A further optimization of the bio-FeS synthesis process and properties is of vital importance to address this challenge. Herein, we present a simple pH-regulation strategy to enhance bio-FeS synthesis and elucidated the underlying regulatory mechanisms. Slightly raising the pH from 7.4 to 8.3 led to 1.5-fold higher sulfide generation rate due to upregulated expression of thiosulfate reduction-related genes, and triggered the formation of fine-sized bio-FeS (29.4 ± 6.1 nm). The resulting bio-hybrid exhibited significantly improved extracellular reduction activity and was successfully used for treatment of high-concentration chromium -containing wastewater (Cr(VI), 80 mg/L) at satisfactory efficiency and stability. Its feasibility for bio-augmented treatment of real Cr(VI)-rich electroplating wastewater was also demonstrated, showing no obvious activity decline during 7-day operation. Overall, our work provides new insights into the environmental-responses of bio-hybrid self-assembly process, and may have important implications for optimized application of bio-hybrid for wastewater treatment and environmental remediation.

Elongated Riboflavin-Producing Shewanella oneidensis in a Hybrid Biofilm Boosts Extracellular Electron Transfer

Shewanella oneidensis is able to carry out extracellular electron transfer (EET), although its EET efficiency is largely limited by low flavin concentrations, poor biofilm forming-ability, and weak biofilm conductivity. After identifying an important role for riboflavin (RF) in EET via in vitro experiments, the synthesis of RF is directed to 837.74 ± 11.42 µm in S. oneidensis. Molecular dynamics simulation reveals RF as a cofactor that binds strongly to the outer membrane cytochrome MtrC, which is correspondingly further overexpressed to enhance EET. Then the cell division inhibitor sulA, which dramatically enhanced the thickness and biomass of biofilm increased by 155% and 77%, respectively, is overexpressed. To reduce reaction overpotential due to biofilm thickness, a spider-web-like hybrid biofilm comprising RF, multiwalled carbon nanotubes (MWCNTs), and graphene oxide (GO) with adsorption-optimized elongated S. oneidensis, achieve a 77.83-fold increase in power (3736 mW m^-2 ) relative to MR-1 and dramatically reduce the charge-transfer resistance and boosted biofilm electroactivity. This work provides an elegant paradigm to boost EET based on a synthetic biology strategy and materials science strategy, opens up further opportunities for other electrogenic bacteria.

Exploitation of renewable energy sources for water desalination using biological tools

The emerging impacts of climate change and the growing world population are driving the demand for more food resources and creating an urgent need for new water resources. About 93% of Earth's surface is made up of water bodies, mainly oceans. Seawater attracted a lot of attention in order to be used as a sustainable source of usable water. However, an essential step in harnessing this source of water is desalination. Utilizing renewable sources of energy, biology offers several tools for removal of salts. This article for the first time reviews all currently available biological water desalination tools and compares their efficiency with industrial systems. Bacteria are employed as electrical power generators to provide the energy needed for desalination in microbial desalination cells. Its salt removal efficiency varied from 0.8 to 30 g/L/d. Many strains of algal cells can grow in high concentrations of salts, adsorb and accumulate it inside the cell, and therefore could be used without prior treatment for seawater desalination. This biological tool can yield salt removal efficiency of 0.4-5 g/L/d. Biopolymers are also used for treatment of seawater through enhancing water evaporation as a component of solar steam generators. Despite significant advances in biological water desalination, further modifications and improvements are still needed to make its use sustainable and cost-effective.

A common inducer molecule enhances sugar utilization by Shewanella oneidensis MR-1

Shewanella oneidensis MR-1 is an electroactive bacterium that is a promising host for bioelectrochemical technologies, which makes it a common target for genetic engineering, including gene deletions and expression of heterologous pathways. Expression of heterologous genes and gene knockdown via CRISPRi in S. oneidensis are both frequently induced by β-D-1-thiogalactopyranoside (IPTG), a commonly used inducer molecule across many model organisms. Here, we report and characterize an unexpected phenotype; IPTG enhances the growth of wild-type S. oneidensis MR-1 on the sugar substrate N-acetylglucosamine (NAG). IPTG improves the carrying capacity of S. oneidensis growing on NAG while the growth rate remains similar to cultures without the inducer. Extracellular acetate accumulates faster and to a higher concentration in cultures without IPTG than those with it. IPTG appears to improve acetate metabolism, which combats the negative effect that acetate accumulation has on the growth of S. oneidensis with NAG. We recommend using extensive experimental controls and careful data interpretation when using both NAG and IPTG in S. oneidensis cultures.

Enhancing the extracellular electron transfer ability via Polydopamine@S. oneidensis MR-1 for Cr(VI) reduction

Microbial reduction of hexavalent chromium (Cr (VI)) shows better efficiency and cost-effectiveness. However, immobilization of Cr (III) remains a challenge as there is a limited supply of electron donors. A greener and cleaner option for donating external electrons was using bioelectrochemical systems to perform the microbial reduction of Cr(VI). In this system, we constructed a polydopamine (PDA) decorated Shewanella oneidensis MR-1 (S. oneidensis MR-1) bioelectrode with bidirectional electron transport, abbreviated as PDA@S. oneidensis MR-1. The conjugated PDA distributed on the intracellular and extracellular of individual S. oneidensis MR-1 has been shown to accelerate electron transfer by outer membrane C-type cytochromes and flavin-bound MtrC/OmcA pathway by various electrochemical analyses. As expected, the PDA@S. oneidensis MR-1 biofilm achieved 88.1% Cr (VI) removal efficiency (RE) and 58.1% Cr (III) immobilization efficiency (IE) within 24 h under the autotrophic conditions at the optimal voltage (-150 mV) compared with the control potential (0 mV). The PDA@S. oneidensis MR-1 biofilm showed increased RE activity was attributed to the shortening of the distance between individual bacteria by PDA. This research provides a viable strategy for in situ bioremediation of Cr(VI) polluted aquatic environment.

Accelerating denitrification and mitigating nitrite accumulation by multiple electron transfer pathways between Shewanella oneidensis MR-1 and denitrifying microbial community

The bio-denitrification was usually retarded by the unbalance of electron generation and consumption. In this study, mixing S. oneidensis MR-1 with denitrifying microbial community increased the nitrogen removal rate by 74.74 % via the interspecies electron transfer (IET), and reduced the accumulated nitrite from 9.90 ± 0.81 to 0.02 ± 0.03 mg/L. Enhanced denitrification still appeared but relatively decreased, when S. oneidensis MR-1 was separated by a dialysis bag (MW < 3000), indicating mediated interspecies electron transfer (MIET) counted in IET. The results of electron transfer activity and sludge conductivity suggested DIET and MIET jointly transfer electrons from MR-1 to electroactive denitrifying bacteria (EDB), improving denitrifying reductase activities. Electron distribution among denitrifying reductases was found to be associated with the IET rate. Microbial insights showed the total abundance of EDB was increased, and denitrifying genes were correspondingly enriched. Pseudomonas was found to cooperate with exoelectrogens in a complicated microbial community.

Living and Regenerative Material Encapsulating Self-Assembled Shewanella oneidensis-CdS Hybrids for Photocatalytic Biodegradation of Organic Dyes

Reductive biodegradation by microorganisms has been widely explored for detoxifying recalcitrant contaminants; however, the biodegradation capacity of microbes is limited by the energy level of the released electrons. Here, we developed a method to self-assemble Shewanella oneidensis-CdS nanoparticle hybrids with significantly improved reductive biodegradation capacity and constructed a living material by encapsulating the hybrids in hydrogels. The material confines the nano-bacteria hybrids and protects them from environmental stress, thus improving their recyclability and long-term stability (degradation capacity unhindered after 4 weeks). The developed living materials exhibited efficient photocatalytic biodegradation of various organic dyes including azo and nitroso dyes. This study highlights the feasibility and benefits of constructing self-assembled nano-bacteria hybrids for bioremediation and sets the stage for the development of novel living materials from nano-bacteria hybrids.

Enhancing anaerobic digestion of food waste with granular activated carbon immobilized with riboflavin

Previous studies have shown that anaerobic digestion of food waste can be enhanced by addition of conductive materials that stimulate direct interspecies electron transfer (DIET) between bacteria and methanogens. However, at extremely high organic loading rates (OLRs), volatile fatty acids (VFAs) still tend to accumulate even in the presence of conductive materials because of an imbalance between the formation of fermentation products and the rate of methanogenesis. In this study, granular activated carbon (GAC) immobilized with riboflavin (GAC-riboflavin) was added to an anaerobic digester treating food waste. The GAC-riboflavin reactor operated stably at OLRs as high as 11.5 kgCOD/ (m³·d) and kept VFA concentrations below 69.4 mM, COD removal efficiencies, methane production rates, and biogas methane concentrations were much higher in the GAC-riboflavin reactor than the GAC- and non-amended reactors. Transcripts associated with genes that code for proteins involved in DIET based metabolism were somewhat more highly expressed by Methanothrix in the GAC-riboflavin reactor. However, it is unlikely that riboflavin acted as an electron shuttle to stimulate DIET. Rather, it seemed to provide nutrients that enhanced the growth of microorganisms involved in the anaerobic digestion process, including those that are capable of DIET.

Single Strain-Triggered Biogeochemical Cycle of Arsenic

The microbial metabolism of arsenic plays a prominent role in governing the biogeochemical cycle of arsenic. Although diverse microbes are known to be involved in the redox transformation of inorganic arsenic, the underlying mechanisms about the arsenic redox cycle mediated by a single microbial strain remain unclear yet. Herein, we discover that Shewanella putrefaciens CN32, a well-known arsenate-respiring and dissimilatory metal-reducing bacterium, could mediate the reversible arsenic redox transformation under aerobic conditions. Genetic analysis shows that S. putrefaciens CN32 contains both ars and arr operon but lacks an As(III) oxidase encoding gene. Arsenic(V) reduction tests demonstrate that the ars operon is advantageous but not essential for As(V) respiration in S. putrefaciens CN32. The Arr complex encoded by the arr operon not only plays a crucial role in arsenate respiration under anaerobic conditions but also participates in the sequential process of As(V) reduction and As(III) oxidation under aerobic conditions. The Arr enzyme also contributes to the microbial As(III) resistance. The expression and catalysis directionality of Arr in S. putrefaciens CN32 are regulated by the carbon source types. Our results highlight the complexity of arsenic redox biotransformation in environments and provide new insights into the important contribution of Arr to the As biogeochemical cycle in nature.