Envisioning Nano Release Dynamics in a Changing World: Using Dynamic Probabilistic Modeling to Assess Future Environmental Emissions of Engineered Nanomaterials

Probabilistic material flow analysis of released nano titanium dioxide in Mexico

Engineered Nanomaterials (ENMs) or products containing ENMs, known as nano-enabled products are commercialized globally by a large number of companies. Concern about the potential risks and negative impacts of releasing ENMs into the environment is under investigation. For this reason, methodologies to estimate the probable mass concentrations of ENMs released in different regions of the world have been developed. As a first attempt to estimate the probable mass flows of nanosized titanium dioxide (nano-TiO2) released in Mexico, we developed a Probabilistic Material Flow Analysis (PMFA) for 2015. The model describes probabilistic mass flows of released nano-TiO2 during the life cycle of sunscreens, coatings, ceramic, and other nano-enabled products, including the flows through the solid waste and wastewater management systems, as well as the transfer of nano-TiO2 to three environmental compartments (atmosphere, topsoil, and surface water). The PMFA incorporates the uncertainty related to the input data. We observed that the most significant nano-TiO2 flows occur to the surface water, landfill, and soil compartments, targeted as the main "hot-spots", where living organisms could be more exposed to this material. Further improvements in the model are needed due to some data gaps at some life cycle stages, for instance, solid waste management and reused wastewater manipulation for irrigation purposes. Finally, the model developed in this study can be adjusted to assess other ENM releases and can be beneficial for further investigation in fate modeling and environmental risk assessment.

Everything falls apart: How solids degrade and release nanomaterials, composite fragments, and microplastics

To ensure the safe use of materials, one must assess the identity and quantity of exposure. Solid materials, such as plastics, metals, coatings and cements, degrade to some extent during their life cycle, and releases can occur during manufacturing, use and end-of-life. Releases (e.g., what is released, how does release happen, and how much material is released) depend on the composition and internal (nano)structures of the material as well as the applied stresses during the lifecycle. We consider, in some depth, releases from mechanical, weathering and thermal stresses and specifically address the use cases of fused-filament 3D printing, dermal contact, food contact and textile washing. Solid materials can release embedded nanomaterials, composite fragments, or micro- and nanoplastics, as well as volatile organics, ions and dissolved organics. The identity of the release is often a heterogenous mixture and requires adapted strategies for sampling and analysis, with suitable quality control measures. Control materials enhance robustness by enabling comparative testing, but reference materials are not always available as yet. The quantity of releases is typically described by time-dependent rates that are modulated by the nature and intensity of the applied stress, the chemical identity of the polymer or other solid matrix, and the chemical identity and compatibility of embedded engineered nanomaterials (ENMs) or other additives. Standardization of methods and the documentation of metadata, including all the above descriptors of the tested material, applied stresses, sampling and analytics, are identified as important needs to advance the field and to generate robust, comparable assessments. In this regard, there are strong methodological synergies between the study of all solid materials, including the study of micro- and nanoplastics. From an outlook perspective, we review the hazard of the released entities, and show how this informs risk assessment. We also address the transfer of methods to related issues such as tyre wear, advanced materials and advanced manufacturing, biodegradable polymers, and non-solid matrices. As the consideration of released entities will become more routine in industry via lifecycle assessment in Safe-and-Sustainable-by-Design practices, release assessments will require careful design of the study with quality controls, the use of agreed-on test materials and standardized methods where these exist and the adoption of clearly defined data reporting practices that enable data reuse, meta-analyses, and comparative studies.

Carbon Nanomaterial Fluorescent Probes and Their Biological Applications

Fluorescent carbon nanomaterials have broadly useful chemical and photophysical attributes that are conducive to applications in biology. In this review, we focus on materials whose photophysics allow for the use of these materials in biomedical and environmental applications, with emphasis on imaging, biosensing, and cargo delivery. The review focuses primarily on graphitic carbon nanomaterials including graphene and its derivatives, carbon nanotubes, as well as carbon dots and carbon nanohoops. Recent advances in and future prospects of these fields are discussed at depth, and where appropriate, references to reviews pertaining to older literature are provided.

Modified toxic potential of multi-walled carbon nanotubes to zebrafish (Danio rerio) following a two-year incubation in water

Multi-walled carbon nanotubes (MWCNTs), widely used in several industrial fields, are not readily degradable thus, persist in environmental matrices, serving as a source of environmental toxicity to organisms. However, the effects of environmental weathering on nanomaterial toxicity remain unclear. Herein, we prepared aged-MWCNTs (a-CNTs) by incubating commercial pristine-MWCNTs (p-CNTs) for two years and compared their changes in physicochemical properties and toxic effects on zebrafish. The characterization of a-CNTs by transmission electron microscopy, X-ray photoelectron spectra, Raman spectroscopy, and Fourier-transform infrared spectroscopy showed an increased surface area, pore size, structural defects, and surface oxidation than those of p-CNTs. Zebrafish were exposed to 100 mg/L p-CNT and a-CNT for four days. Subsequently, the mRNA expression of antioxidant enzymes, including cat, gst, and sod, in a-CNT group increased by 1.5- to 1.7-fold, consistent with increased expression of genes associated with inflammation (interleukin-8) and apoptosis (p53) compared to control. The higher toxicity of a-CNTs to zebrafish than p-CNT might be due to the increased oxidative potential by altered physicochemical properties. These findings provide new insights into the risk assessment and environmental management of MWCNTs in the aquatic environment. However, further testing at environmentally relevant doses, different exposure durations, and diverse weathering parameters is warranted.

Environmental behavior of silver nanomaterials in aquatic environments: An updated review

The increasing applications of silver nanomaterials (nano-Ag) and their inevitable release posed great potential risks to aquatic organisms and ecosystems. Considerable attention has been attracted on their behaviors and transformations, which were critically important for their subsequent biological toxicities and ecological effects. Therefore, the summary of the recent efforts on the environmental behavior of nano-Ag would be beneficial for understanding the environmental fate and accurate risk assessment. This review summarized the studies on various physical, chemical and biological transformations of nano-Ag, meanwhile, the influencing factors (including the intrinsic properties and environmental conditions) and related mechanisms were highlighted. Surface structure and facets of nano-Ag, abiotic conditions and natural freeze-thaw cycle processes could affect the transformations of nano-Ag under different environmental scenarios (including freshwater, seawater and wastewater). The interactions with co-present components, such as chemicals and other particles, impacted the multiple processes of nano-Ag. Besides, the contradictory effects and mechanisms by several environmental factors were summarized. Lastly, the key knowledge gaps and some aspects that deserve further investigation were also addressed. Therefore, the current review aimed to provide an overall analysis of transformation processes of nano-Ag, which will provide more available information and pave the way for the future research areas.

Computational Nanotoxicology Models for Environmental Risk Assessment of Engineered Nanomaterials

Although engineered nanomaterials (ENMs) have tremendous potential to generate technological benefits in numerous sectors, uncertainty on the risks of ENMs for human health and the environment may impede the advancement of novel materials. Traditionally, the risks of ENMs can be evaluated by experimental methods such as environmental field monitoring and animal-based toxicity testing. However, it is time-consuming, expensive, and impractical to evaluate the risk of the increasingly large number of ENMs with the experimental methods. On the contrary, with the advancement of artificial intelligence and machine learning, in silico methods have recently received more attention in the risk assessment of ENMs. This review discusses the key progress of computational nanotoxicology models for assessing the risks of ENMs, including material flow analysis models, multimedia environmental models, physiologically based toxicokinetics models, quantitative nanostructure-activity relationships, and meta-analysis. Several challenges are identified and a perspective is provided regarding how the challenges can be addressed.

Predicting environmental concentrations of nanomaterials for exposure assessment - a review

There have been major advances in the science to predict the likely environmental concentrations of nanomaterials, which is a key component of exposure and subsequent risk assessment. Considerable progress has been since the first Material Flow Analyses (MFAs) in 2008, which were based on very limited information, to more refined current tools that take into account engineered nanoparticle (ENP) size distribution, form, dynamic release, and better-informed release factors. These MFAs provide input for all environmental fate models (EFMs), that generate estimates of particle flows and concentrations in various environmental compartments. While MFA models provide valuable information on the magnitude of ENP release, they do not account for fate processes, such as homo- and heteroaggregation, transformations, dissolution, or corona formation. EFMs account for these processes in differing degrees. EFMs can be divided into multimedia compartment models (e.g., atmosphere, waterbodies and their sediments, soils in various landuses), of which there are currently a handful with varying degrees of complexity and process representation, and spatially-resolved watershed models which focus on the water and sediment compartments. Multimedia models have particular applications for considering predicted environmental concentrations (PECs) in particular regions, or for developing generic "fate factors" (i.e., overall persistence in a given compartment) for life-cycle assessment. Watershed models can track transport and eventual fate of emissions into a flowing river, from multiple sources along the waterway course, providing spatially and temporally resolved PECs. Both types of EFMs can be run with either continuous sources of emissions and environmental conditions, or with dynamic emissions (e.g., temporally varying for example as a new nanomaterial is introduced to the market, or with seasonal applications), to better understand the situations that may lead to peak PECs that are more likely to result in exceedance of a toxicological threshold. In addition, bioaccumulation models have been developed to predict the internal concentrations that may accumulate in exposed organisms, based on the PECs from EFMs. The main challenge for MFA and EFMs is a full validation against observed data. To date there have been no field studies that can provide the kind of dataset(s) needed for a true validation of the PECs. While EFMs have been evaluated against a few observations in a small number of locations, with results that indicate they are in the right order of magnitude, there is a great need for field data. Another major challenge is the input data for the MFAs, which depend on market data to estimate the production of ENPs. The current information has major gaps and large uncertainties. There is also a lack of robust analytical techniques for quantifying ENP properties in complex matrices; machine learning may be able to fill this gap. Nevertheless, there has been major progress in the tools for generating PECs. With the emergence of nano- and microplastics as a leading environmental concern, some EFMs have been adapted to these materials. However, caution is needed, since most nano- and microplastics are not engineered, therefore their characteristics are difficult to generalize, and there are new fate and transport processes to consider.

Unraveling the plethora of toxicological implications of nanoparticles on living organisms and recent insights into different remediation strategies: A comprehensive review

Increased use of nanoscale particles have benefited many industries, including medicine, electronics, and environmental cleaning. These particles provide higher material performance, greater reactivity, and improved drug delivery. However, the main concern is the generation of nanowastes that can spread in different environmental matrices, posing threat to our environment and human health. Nanoparticles (NPs) have the potential to enter the food chain through a variety of pathways, including agriculture, food processing, packaging, and environmental contamination. These particles can negatively impact plant and animal physiology and growth. Due to the assessment of their environmental damage, nanoparticles are the particles of size between 1 and 100 nm that is the recent topic to be discussed. Nanoparticles' absorption, distribution, and toxicity to plants and animals can all be significantly influenced by their size, shape, and surface chemistry. Due to their absorptive capacity and potential to combine with other harmful substances, they can alter the metabolic pathways of living organisms. Nevertheless, despite the continuous research and availability of data, there are still knowledge gaps related to the ecotoxicology, prevalence and workable ways to address the impact of nanoparticles. This review focuses on the impact of nanoparticles on different organisms and the application of advanced techniques to remediate ecosystems using hyperaccumulator plant species. Future considerations are explored around nano-phytoremediation, as an eco-friendly, convenient and cost effective technology that can be applied at field scales.

Catching nano: Evaluating the fate and behaviour of nano-TiO2 in swimming pools through dynamic simulation modelling

Engineered titanium dioxide nanoparticles (nano-TiO2) in consumer products such as sunscreens widely used by swimmers in aquatic settings have raised concerns about their potential adverse impact on ecosystems and human health due to their small size and unique physicochemical properties. Therefore, this research paper aims to investigate the fate and behaviour of nano-TiO2 from sunscreens in swimming pools using System Dynamics Modelling. The study developed a dynamic simulation model that considers various factors, including weather conditions, sunscreen and pool usage behaviour, filtration efficacy, pool maintenance, water chemistry, pool chemicals, and TiO2 concentration levels, which can affect exposure levels for different scenarios. The study considered non-linear interdependent relationships, feedback structures, and temporal changes and dealt with parameter uncertainties through Monte Carlo analyses. The results reveal that the regular use of sunscreen leads to nano-TiO2 concentrations ranging from 0.001 to 0.05 mg/L within a year, reflecting seasonal and pool usage variations. The study also found that changes in the weight percentage of TiO2 in the sunscreen formulation and the filtration duration per day are the most sensitive factors affecting TiO2 concentrations. Scenario analyses exploring different nano-TiO2 removal strategies suggested that one daily turnover is necessary for sufficient removal. Regular manual pool maintenance and monthly use of a pool clarifier are recommended for enhanced and accelerated removal without substantial additional costs. The study is novel in its integrated approach, combining empirical work with dynamic simulations, resulting in a novel approach to model the environmental fate and behaviour of nano-TiO2. The study makes important methodological contributions to the field and has initiated an interdisciplinary collaboration to create more accurate models. This study is of great significance as it presents a pioneering analysis of the impact of sunscreen properties, user behaviour, and environmental stressors on the fate and behaviour of nano-TiO2 in swimming pools.

A study on the mechanism of Indium phosphide/zinc sulfide core/shell quantum dots influencing embryo incubation of rare minnow (Gobiocypris rarus)

Quantum dots (QDs) inhibit fish hatching, but the mechanism is still unclear. In this study, the effect of Indium phosphide/zinc sulfide quantum dots (InP/ZnS QDs) on the embryo incubation of rare minnow was investigated. Five experimental concentration groups were set up according to the preliminary experimental results, which were 0, 50, 100, 200 and 400 nM. A direct exposure method was adopted to expose embryos to InP/ZnS QDs solution. The results showed that InP/ZnS QDs significantly inhibited the embryo hatching rate, delayed embryo emergence, affected the expression of genes associated with hatching gland cells and hatching enzymes. InP/ZnS QDs also destroy the structure of the embryo chorion. In addition, QDs can cause oxidative stress in embryos. Transcriptional sequencing analysis showed that InP/ZnS QDs InP/ZnS QDs may have induced the production of a hypoxic environment and triggered induce abnormal cardiac muscle contraction, inflammatory response and apoptosis process in embryos. In conclusion, QDs influences embryo hatchability largely through egg chorion mediation.

Predicting accidental release of engineered nanomaterials to the environment

Challenges in distinguishing between natural and engineered nanomaterials (ENMs) and the lack of historical records on ENM accidents have hampered attempts to estimate the accidental release and associated environmental impacts of ENMs. Building on knowledge from the nuclear power industry, we provide an assessment of the likelihood of accidental release rates of ENMs within the next 10 and 30 years. We evaluate risk predictive methodology and compare the results with empirical evidence, which enables us to propose modelling approaches to estimate accidental release risk probabilities. Results from two independent modelling approaches based on either assigning 0.5% of reported accidents to ENM-releasing accidents (M1) or based on an evaluation of expert opinions (M2) correlate well and predict severe accidental release of 7% (M1) in the next 10 years and of 10% and 20% for M2 and M1, respectively, in the next 30 years. We discuss the relevance of these results in a regulatory context.

Thermodynamic investigation of nanoplastic aggregation in aquatic environments

In this study, the aggregation behavior of polystyrene nanoplastics (PS NPs) in the absence or presence of oppositely charged particulate matters is systematically investigated for a wide range of electrolyte conditions. Herein, we used isothermal titration calorimetry combined with time-resolved dynamic light scattering to provide kinetic and thermodynamic insights into the NP aggregation. The thermodynamic profiles of homoaggregation and heteroaggregation were fit using an independent site and two independent sites models, respectively, demonstrating different interaction modes of both aggregation processes. We found that the contribution of solvation entropy was significant and variable in most cases, and this thermodynamic parameter was a large determinant of the thermodynamics of NP aggregation. Furthermore, the stability of PS NPs in natural water matrices was found to be correlated with ionic strength and the content of natural colloids (e.g., metal oxides and clay particles). These results point to the importance of considering the role of thermodynamic variables when studying the fate of NPs within various environmental conditions.

Prospective Dynamic and Probabilistic Material Flow Analysis of Graphene-Based Materials in Europe from 2004 to 2030

As industrial demand for graphene-based materials (GBMs) grows, more attention falls on potential environmental risks. The present article describes a first assessment of the environmental releases of GBMs using dynamic probabilistic material flow analysis. The model considered all current or expected uses of GBMs from 2004 to 2030, during which time there have already been significant changes in how the graphene mass produced is distributed to different product categories. Although the volume of GBM production is expected to grow exponentially in the coming years, outflow from the consumption of products containing GBMs shows only a slightly positive trend due to their long lifetimes and the large in-use stock of some applications (e.g., GBM composites used in wind turbine blades). From consumption and end-of-life phase GBM mass flows in 2030, estimates suggest that more than 50% will be incinerated and oxidized in waste plants, 16% will be landfilled, 12% will be exported out of Europe, and 1.4% of the annual production will flow to the environment. Predicted release concentrations for 2030 are 1.4 ng/L in surface water and 20 μg/kg in sludge-treated soil. This study's results could be used for prospective environmental risk assessments and as input for environmental fate models.

Visible-Light Activation of a Dissolved Organic Matter-TiO2 Complex Mediated via Ligand-to-Metal Charge Transfer

Given the widespread use of TiO₂, its release into aquatic systems and complexation with dissolved organic matter (DOM) are highly possible, making it important to understand how such interactions affect photocatalytic activity under visible light. Here, we show that humic acid/TiO₂ complexes (HA/TiO₂) exhibit photoactivity (without significant electron-hole activation) under visible light through ligand-to-metal charge transfer (LMCT). The observed visible-light activities for pollutant removal and bacterial inactivation are primarily linked to the generation of H₂O₂via the conduction band. By systematically considering molecular-scale interactions between TiO₂ and organic functional groups in HA, we find a key role of phenolic groups in visible-light absorption and H₂O₂ photogeneration. The photochemical formation of H₂O₂ in river waters spiked with TiO₂ is notably elevated above naturally occurring H₂O₂ generated from background organic constituents due to LMCT contribution. Our findings suggest that H₂O₂ generation by HA/TiO₂ is related to the quantity and functional group chemistry of DOM, which provides chemical insights into photocatalytic activity and potential ecotoxicity of TiO₂ in environmental and engineered systems.

Insights on the Dynamics and Toxicity of Nanoparticles in Environmental Matrices

The manufacturing rate of nanoparticles (10–100 nm) is steadily increasing due to their extensive applications in the fabrication of nanoproducts related to pharmaceuticals, cosmetics, medical devices, paints and pigments, energy storage etc. An increase in research related to nanotechnology is also a cause for the production and disposal of nanomaterials at the lab scale. As a result, contamination of environmental matrices with nanoparticles becomes inevitable, and the understanding of the risk of nanoecotoxicology is getting larger attention. In this context, focusing on the environmental hazards is essential. Hence, this manuscript aims to review the toxic effects of nanoparticles on soil, water, aquatic, and terrestrial organisms. The effects of toxicity on vertebrates, invertebrates, and plants and the source of exposure, environmental and biological dynamics, and the adverse effects of some nanoparticles are discussed.

Impacts of Longer-Term Exposure to AuNPs on Two Soil Ecotoxicological Model Species

The production, use and disposal of nanoparticles (NPs) has been increasing continuously. Due to its unique properties, such as a high resistance to oxidation, gold NPs (AuNPs) are persistent in the environment, including the terrestrial, one of the major sinks of NPs. The present study aimed to assess the effects of AuNPs (from 10 to 1000 mg/kg) on two OECD standard ecotoxicological soil model species, Enchytraeus crypticus and Folsomia candida, based on the reproduction test (28 days) and on a longer-term exposure (56 days), and survival, reproduction, and size were assessed. AuNPs caused no significant hazard to F. candida, but for E. crypticus the lowest tested concentrations (10 and 100 mg AuNPs/kg) reduced reproduction. Further, AuNPs’ toxicity increased from the 28th to the 56th day mainly to F. candida, as observed in animals’ size reduction. Therefore, longer-term exposure tests are recommended as these often reveal increased hazards, not predicted when based on shorter exposures. Additionally, special attention should be given to the higher hazard of low concentrations of NPs, compared to higher concentrations.

Chromosomal aberrations, DNA damage and biochemical disturbances induced by silver nanoparticles in mice: Role of particle size and natural compounds treatment

CONTEXT

Nanotechnology is widely used nowadays in several fields of industry, engineering, and medicine, the biological action mechanisms of AgNPs, which mainly involve the release of silver ions (Ag⁺), generation of reactive oxygen species (ROS).

OBJECTIVE

The potential toxicity AgNPs of damages to hepatic cells, hesperidin, and naringin role for their protective effect against the increase of ROS due to AgNPs toxicity. They can be restored, most cellular biochemical parameters, genotoxicity, mutagenicity, and histopathological analysis.

MATERIALS AND METHODS

Toxicity was induced by an oral dose of Ag NPs of (20-100 nm) for one month, after that treated with hesperidin, naringin (100 mg/kg) for three weeks, malondialdehyde (MDA) levels, nitric oxide (NO), glutathione (GSH) and catalase were estimated. Also, aminotransferases (AST and ALT), alkaline phosphatase (ALP), γ-glutamyltransferase (GGT), albumin, and total bilirubin were determined, following Chromosomal aberrations, DNA breaks and histological analyses.

RESULTS

hesperidin, and naringin treatment, recorded amelioration in most biochemical, genetic and spermatogenesis disturbances Also, histological Investigations were improved.

CONCLUSION

Their biological safety problems such as potential toxicity on cells, tissue, and organs should be paid enough attention, hesperidin and naringin amelioration fundamental alterations, as hepatic architectural and DNA damage, related to its role as antioxidant and anti-inflammatory agent.

Comparative evaluation of the mechanisms of toxicity of graphene oxide and graphene oxide quantum dots to blue-green algae Microcystis aeruginosa in the aquatic environment

Due to the diverse applications, graphene-family nanomaterials (GFNs) have a high probability of release into the aquatic system, potentially posing risks to the aquatic environment. The acute effects on single-celled Microcystis aeruginosa by graphene oxide (GO) or graphene oxide quantum dots (GOQDs) were compared in the present study. GOQDs dispersed more effectively in water than GO at all pH values tested. The 96-hour median effective concentration (EC₅₀) of GO and GOQDs were determined to be 49.32 and 22.46 mg/L, respectively. Both GO and GOQDs were internalized by heteroagglomeration and envelopment processes, with GOQDs inducing stronger upregulation of cell permeability, plasmolysis and lipid bodies than GO. Cracking of thylakoid layers, disappearance of nucleoid, and disintegration of cell infrastructure were observed at higher concentrations. In comparison to GO, GOQDs induced higher reactive oxygen species (ROS) and malondialdehyde (MDA) and disrupted antioxidant enzymes, leading to the inhibition of cellular contents such as chlorophyll a and proteins. Furthermore, both GO and GOQDs adsorbed nutrients from the algal medium, resulting in nutrient depletion-induced indirect toxicity, with GOQDs depleting more nutrients than GO. The current study provides new understanding of nanotoxicity of GO and GOQD and aids in the potential risks of nanomaterials in aquatic environments.

Distinguishing Engineered TiO2 Nanomaterials from Natural Ti Nanomaterials in Soil Using spICP-TOFMS and Machine Learning

Identifying engineered nanomaterials (ENMs) made from earth-abundant elements in soils is difficult because soil also contains natural nanomaterials (NNMs) containing similar elements. Here, machine learning models using elemental fingerprints and mass distributions of three TiO₂ ENMs and Ti-based NNMs recovered from three natural soils measured by single-particle inductively coupled plasma time-of-flight mass spectrometry (spICP-TOFMS) was used to identify TiO₂ ENMs in soil. Synthesized TiO₂ ENMs were unassociated with other elements (>98%), while 40% of Ti-based ENM particles recovered from wastewater sludge had distinguishable elemental associations. All Ti-based NNMs extracted from soil had a similar chemical fingerprint despite the soils being from different regions, and >60% of Ti-containing NNMs had no measurable associated elements. A machine learning model best distinguished NNMs and ENMs when differences in Ti-mass distribution existed between them. A trained LR model could classify 100 nm TiO₂ ENMs at concentrations of 150 mg kg^-1 or greater. The presence of TiO₂ ENMs in soil could be confirmed using this approach for most ENM-soil combinations, but the absence of a unique chemical fingerprint in a large fraction of both TiO₂ ENMs and Ti-NNMs increases model uncertainty and hinders accurate quantification.

Pristine and sulfidized ZnO nanoparticles alter microbial community structure and nitrogen cycling in freshwater lakes

Zinc oxide nanoparticles (ZnO NPs) and its sulfidized form (ZnS NPs) are increasingly entering into freshwater systems through multiple pathways. However, their impacts on the composition and function of sedimentary microbial communities are still largely unknown. Here, two kinds of lake-derived microcosms were constructed and incubated with ZnO NPs, or ZnS NPs to investigate the short-term (7 days) and long-term (50 days) impacts on sedimentary microbial communities and nitrogen cycling. After 7 days, both ZnO NPs and ZnS NPs dosed microbial communities experienced distinct alterations as compared to the undosed controls. By day 50, the structural shifts of microbial communities caused by ZnO NPs were significantly enlarged, while the microbial shifts induced by ZnS NPs were largely resolved. Additionally, ZnO NPs and ZnS NPs could significantly alter nitrogen species and nitrogen cycling genes in sediments, revealing their non-negligible impacts on nitrogen cycling processes. Furthermore, our data clearly indicated that the impacts of ZnO NPs and ZnS NPs on nitrogen cycling differed distinctly in different lake-derived microcosms, and the impacts were significantly correlated with microbial community structure. Overall, this research suggests that the entrance of pristine or sulfidized ZnO NPs into freshwater systems may significantly impact the sedimentary microbial community structure and nitrogen cycling.

A critical review of the environmental impacts of manufactured nano-objects on earthworm species

The presence of manufactured nano-objects (MNOs) in various consumer or their (future large-scale) use as nanoagrochemical have increased with the rapid development of nanotechnology and therefore, concerns associated with its possible ecotoxicological effects are also arising. MNOs are releasing along the product life cycle, consequently accumulating in soils and other environmental matrices, and potentially leading to adverse effects on soil biota and their associated processes. Earthworms, of the group of Oligochaetes, are an ecologically significant group of organisms and play an important role in soil remediation, as well as acting as a potential vector for trophic transfer of MNOs through the food chain. This review presents a comprehensive and critical overview of toxic effects of MNOs on earthworms in soil system. We reviewed pathways of MNOs in agriculture soil environment with its expected production, release, and bioaccumulation. Furthermore, we thoroughly examined scientific literature from last ten years and critically evaluated the potential ecotoxicity of 16 different metal oxide or carbon-based MNO types. Various adverse effects on the different earthworm life stages have been reported, including reduction in growth rate, changes in biochemical and molecular markers, reproduction and survival rate. Importantly, this literature review reveals the scarcity of long-term toxicological data needed to actually characterize MNOs risks, as well as an understanding of mechanisms causing toxicity to earthworm species. This review sheds light on this knowledge gap as investigating bio-nano interplay in soil environment improves our major understanding for safer applications of MNOs in the agriculture environment.

Quantification and Characterization of Ti-, Ce-, and Ag-Nanoparticles in Global Surface Waters and Precipitation

Nanoparticle (NP) emissions to the environment are increasing as a result of anthropogenic activities, prompting concerns for ecosystems and human health. In order to evaluate the risk of NPs, it is necessary to know their concentrations in various environmental compartments on regional and global scales; however, these data have remained largely elusive due to the analytical difficulties of measuring NPs in complex natural matrices. Here, we measure NP concentrations and sizes for Ti-, Ce-, and Ag-containing NPs in numerous global surface waters and precipitation samples, and we provide insights into their compositions and origins (natural or anthropogenic). The results link NP occurrences and distributions to particle type, origin, and sampling location. Based on measurements from 46 sites across 13 countries, total Ti- and Ce-NP concentrations (regardless of origin) were often found to be within 10⁴ to 10⁷ NP mL^-1, whereas Ag NPs exhibited sporadic occurrences with low concentrations generally up to 10⁵ NP mL^-1. This generally corresponded to mass concentrations of <1 ng L^-1 for Ag-NPs, <100 ng L^-1 for Ce-NPs, and <10 μg L^-1 for Ti-NPs, given that measured sizes were often below 15 nm for Ce- and Ag-NPs and above 30 nm for Ti-NPs. In view of current toxicological data, the observed NP levels do not yet appear to exceed toxicity thresholds for the environment or human health; however, NPs of likely anthropogenic origins appear to be already substantial in certain areas, such as urban centers. This work lays the foundation for broader experimental NP surveys, which will be critical for reliable NP risk assessments and the regulation of nano-enabled products.

Nanoparticles: Weighing the Pros and Cons from an Eco-genotoxicological Perspective

The exponential growth of nanotechnology and the industrial production have raised concerns over its impact on human and environmental health and safety (EHS). Although there has been substantial progress in the assessment of pristine nanoparticle toxicities, their EHS impacts require greater clarification. In this review, we discuss studies that have assessed nanoparticle eco-genotoxicity in different test systems and their fate in the environment as well as the considerable confounding factors that may complicate the results. We highlight key mechanisms of nanoparticle-mediated genotoxicity. Then we discuss the reliability of endpoint assays, such as the comet assay, the most favored assessment technique because of its versatility to measure low levels of DNA strand breakage, and the micronucleus assay, which is complementary to the former because of its greater ability to detect chromosomal DNA fragmentation. We also address the current recommendations on experimental design, including environmentally relevant concentrations and suitable exposure duration to avoid false-positive or -negative results. The genotoxicity of nanoparticles depends on their physicochemical features and the presence of co-pollutants. Thus, the effect of environmental processes (e.g., aggregation and agglomeration, adsorption, and transformation of nanoparticles) would account for when determining the actual genotoxicity relevant to environmental systems, and assay procedures must be standardized. Indeed, the engineered nanoparticles offer potential applications in different fields including biomedicine, environment, agriculture, and industry. Toxicological pathways and the potential risk factors related to genotoxic responses in biological organisms and environments need to be clarified before appropriate and sustainable applications of nanoparticles can be established.

Nanoimpact in Plants: Lessons from the Transcriptome

Transcriptomics studies are available to evaluate the potential toxicity of nanomaterials in plants, and many highlight their effect on stress-responsive genes. However, a comparative analysis of overall expression changes suggests a low impact on the transcriptome. Environmental challenges like pathogens, saline, or drought stress induce stronger transcriptional responses than nanoparticles. Clearly, plants did not have the chance to evolve specific gene regulation in response to novel nanomaterials; but they use common regulatory circuits with other stress responses. A shared effect with abiotic stress is the inhibition of genes for root development and pathogen response. Other works are reviewed here, which also converge on these results.

Integrated dynamic probabilistic material flow analysis of engineered materials in all European countries

Uncertainties remain regarding the potential environmental risks of engineered nanomaterials, reflecting missing information on both the exposure and the hazard sides. Probabilistic material flow analysis (PMFA) is a useful exposure assessment tool that maps the flows of a substance through its lifecycle towards the environment, taking into account the uncertainties associated with the input data. In the last years, several refinements have been made to the original PMFA method, increasing its complexity with respect to systems dynamics, fate during recycling and reprocessing and forms of release. In this work, an integrated dynamic probabilistic material flow analysis (IDPMFA) was developed that combines all separate advancements of the method in one overarching software code. The new method was used to assess the forms in which nano-Ag, nano-TiO₂ and nano-ZnO are released into air, soils and surface water. Each European country (EU28, Norway and Switzerland) was studied from the year 2000 to the year 2020. The present model includes new assessments of the forms in which nano-ZnO is released into the environment and of the flows out of reprocessing (last step of recycling) of nano-Ag, nano-TiO₂ and nano-ZnO towards both technical and environmental compartments. The forms of ZnO released to different compartments vary greatly with different proportions between pristine, dissolved, matrix-embedded and transformed forms. The same applies for the forms of the other ENMs released after reprocessing, where different processes result in very different distributions between the various forms. The country-specific assessment showed that it is mainly the different solid waste treatment schemes that influence the distribution to final environmental sinks. Overall, the results of IDPMFA show the great importance of considering the full life cycle of nanoproducts including the different stages of recycling, the differences between countries, and the forms of the released materials. The results from the integrated model will provide useful input information for environmental fate models and for environmental risk assessments.

Manganese dioxide nanosheets induce mitochondrial toxicity in fish gill epithelial cells

The development and production of engineered 2D nanomaterials are expanding exponentially, increasing the risk of their release into the aquatic environment. A recent study showed 2D MnO2 nanosheets, under development for energy and biomedical applications, dissolve upon interaction with biological reducing agents, resulting in depletion of intracellular glutathione levels within fish gill cells. However, little is known concerning their toxicity and interactions with subcellular organelles. To address this gap, we examined cellular uptake, cytotoxicity and mitochondrial effects of 2D MnO2 nanosheets using an in vitro fish gill cell line to represent a target tissue of rainbow trout, a freshwater indicator species. The data demonstrate cellular uptake of MnO2 nanosheets into lysosomes and potential mechanisms of dissolution within the lysosomal compartment. MnO2 nanosheets induced severe mitochondrial dysfunction at sub-cytotoxic doses. Quantitative, single cell fluorescent imaging revealed mitochondrial fission and impaired mitochondrial membrane potential following MnO2 nanosheet exposure. Seahorse analyses for cellular respiration revealed that MnO2 nanosheets inhibited basal respiration, maximal respiration and the spare respiratory capacity of gill cells, indicating mitochondrial dysfunction and reduced cellular respiratory activity. MnO2 nanosheet exposure also inhibited ATP production, further supporting the suppression of mitochondrial function and cellular respiration. Together, these observations indicate that 2D MnO2 nanosheets impair the ability of gill cells to respond to energy demands or prolonged stress. Finally, our data demonstrate significant differences in the toxicity of the 2D MnO2 nanosheets and their microparticle counterparts. This exemplifies the importance of considering the unique physical characteristics of 2D nanomaterials when conducting safety assessments.

Nanomaterials in the environment, human exposure pathway, and health effects: A review

Nanomaterials (NMs), both natural and synthetic, are produced, transformed, and exported into our environment daily. Natural NMs annual flux to the environment is around 97% of the total and is significantly higher than synthetic NMs. However, synthetic NMs are considered to have a detrimental effect on the environment. The extensive usage of synthetic NMs in different fields, including chemical, engineering, electronics, and medicine, makes them susceptible to be discharged into the atmosphere, various water sources, soil, and landfill waste. As ever-larger quantities of NMs end up in our environment and start interacting with the biota, it is crucial to understand their behavior under various environmental conditions, their exposure pathway, and their health effects on human beings. This review paper comprises a large portion of the latest research on NMs and the environment. The article describes the natural and synthetic NMs, covering both incidental and engineered NMs and their behavior in the natural environment. The review includes a brief discussion on sampling strategies and various analytical tools to study NMs in complex environmental matrices. The interaction of NMs in natural environments and their pathway to human exposure has been summarized. The potential of NMs to impact human health has been elaborated. The nanotoxicological effect of NMs based on their inherent properties concerning to human health is also reviewed. The knowledge gaps and future research needs on NMs are reported. The findings in this paper will be a resource for researchers working on NMs all over the world to understand better the challenges associated with NMs in the natural environment and their human health effects.

Finding Nano: Challenges Involved in Monitoring the Presence and Fate of Engineered Titanium Dioxide Nanoparticles in Aquatic Environments

In recent years, titanium dioxide (TiO2) has increasingly been used as an inorganic ultraviolet (UV) filter for sun protection. However, nano-TiO2 may also pose risks to the health of humans and the environment. Thus, to adequately assess its potential adverse effects, a comprehensive understanding of the behaviour and fate of TiO2 in different environments is crucial. Advances in analytical and modelling methods continue to improve researchers’ ability to quantify and determine the state of nano-TiO2 in various environments. However, due to the complexity of environmental and nanoparticle factors and their interplay, this remains a challenging and poorly resolved feat. This paper aims to provide a focused summary of key particle and environmental characteristics that influence the behaviour and fate of sunscreen-derived TiO2 in swimming pool water and natural aquatic environments and to review the current state-of-the-art of single particle inductively coupled plasma mass spectrometry (SP-ICP-MS) approaches to detect and characterise TiO2 nanoparticles in aqueous media. Furthermore, it critically analyses the capability of existing fate and transport models to predict environmental TiO2 levels. Four particle and environmental key factors that govern the fate and behaviour of TiO2 in aqueous environments are identified. A comparison of SP-ICP-MS studies reveals that it remains challenging to detect and characterise engineered TiO2 nanoparticles in various matrices and highlights the need for the development of new SP-ICP-MS pre-treatment and analysis approaches. This review shows that modelling studies are an essential addition to experimental studies, but they still lack in spatial and temporal resolution and mostly exclude surface transformation processes. Finally, this study identifies the use of Bayesian Network-based models as an underexplored but promising modelling tool to overcome data uncertainties and incorporates interconnected variables.

Too small to matter? Physicochemical transformation and toxicity of engineered nTiO2, nSiO2, nZnO, carbon nanotubes, and nAg

Engineered nanomaterials (ENMs) refer to a relatively novel class of materials that are increasingly prevalent in various consumer products and industrial applications - most notably for their superlative physicochemical properties when compared with conventional materials. However, consumer products inevitably degrade over the course of their lifetime, releasing ENMs into the environment. These ENMs undergo physicochemical transformations and subsequently accumulate in the environment, possibly leading to various toxic effects. As a result, a significant number of studies have focused on identifying the possible transformations and environmental risks of ENMs, with the objective of ensuring a safe and responsible application of ENMs in consumer products. This review aims to consolidate the results from previous studies related to each stage of the pathway of ENMs from being embodied in a product to disintegration/transformation in the environment. The scope of this work was defined to include the five most prevalent ENMs based on recent projected production market data, namely: nTiO₂, nSiO₂, nZnO, carbon nanotubes, and nAg. The review focuses on: (i) models developed to estimate environmental concentrations of ENMs; (ii) the possible physicochemical transformations; (iii) cytotoxicity and genotoxicity effects specific to each ENM selected; and (iv) a discussion to identify potential gaps in the studies conducted and recommend areas where further investigation is warranted.

Concentrations and size distribution of TiO2 and Ag engineered particles in five wastewater treatment plants in the United States

The growing use of engineered particles (e.g., nanosized and pigment sized particles, 1 to 100 nm and 100 to 300 nm, respectively) in a variety of consumer products increases the likelihood of their release into the environment. Wastewater treatment plants (WWTPs) are important pathways of introduction of engineered particles to the aquatic systems. This study reports the concentrations, removal efficiencies, and particle size distributions of Ag and TiO₂ engineered particles in five WWTPs in three states in the United States. The concentration of Ag engineered particles was quantified as the total Ag concentration, whereas the concentration of TiO₂ engineered particles was quantified using mass-balance calculations and shifts in the elemental ratio of Ti/Nb above their natural background elemental ratio. Ratios of Ti/Nb in all WWTP influents, activated sludges, and effluents were 2-12 times higher (e.g., 519 to 3243) than the natural background Ti/Nb ratio (e.g., 267 ± 9), indicating that 49-92% of Ti originates from anthropogenic sources. The concentration of TiO₂ engineered particles (in μg TiO₂ L^-1) in the influent, activated sludge, and effluent varied within the ranges of 70-670, 3570-6700, and 7-30, respectively. The concentration of Ag engineered particles (in μg Ag L^-1) in the influent, activated sludge, and effluent varied within the ranges of 0.11-0.33, 1.45-1.65, and 0.01-0.04, respectively. The overall removal efficiency (e.g., effluent/influent concentrations) of TiO₂ engineered particles (e.g., 90 to 96%) was higher than that for Ag engineered particles (e.g., 82 to 95%). Particles entering WWTPs are in the nanosized range for Ag (e.g., >99%) and a mixture of nanosized (e.g., 15 to 90%) and pigment sized particles (e.g., 10 to 85%) for TiO₂. Nearly all Ag (>99%) and 55 to 100% of TiO₂ particles discharged to surface water with WWTP effluent are within the nanosize range. This study provides evidence that TiO₂ and Ag engineered nanomaterials enter aquatic systems with WWTP effluents, and that their concentrations are expected to increase with the increased applications of TiO₂ and Ag engineered nanomaterials in consumer products.

Probabilistic modelling of nanobiomaterial release from medical applications into the environment

Nanobiomaterials (NBMs) are currently being tested in numerous biomedical applications, and their use is expected to grow rapidly in the near future. Many different types of nanomaterials are employed for a wide variety of different applications. Silver nanoparticles (nano-Ag) have been investigated for their antibacterial, antifungal, and osteoinductive properties to be used in catheters, wound healing, dental applications, and bone healing. Polymeric nanoparticles such as poly(lactic-co-glycolic acid) (PLGA) are mainly studied for their ability to deliver cancer drugs as the body metabolizes them into simple compounds. However, most of these applications are still in the development stage and unavailable on the market, meaning that information on possible consumption, material flows, and concentrations in the environment is lacking. We thus modeled a realistic scenario involving several nano-Ag and PLGA applications which are already in use or likely to reach the market soon. We assumed their full market penetration in Europe in order to explore the prospective flows of NBMs and their environmental concentrations. The potential flows of three application-specific composite materials were also examined for one precise application each: Fe₃O₄PEG-PLGA used in drug delivery, MgHA-collagen used for bone tissue engineering, and PLLA-Ag applied in wound healing. Mean annual consumption in Europe, considering all realistic and probable applications of the respective NBMs, was estimated to be 5,650 kg of nano-Ag and 48,000 kg of PLGA. Mean annual consumption of the three application-specific materials under the full market penetration scenario was estimated to be 4,000 kg of Fe₃O₄PEG-PLGA, 58 kg of MgHA-collagen, and 24,300 kg of PLLA-Ag. A probabilistic material-flow model was used to quantify flows of the NBMs studied from production, through use, and on to end-of-life in the environment. The highest possible worst-case predicted environmental concentration (wc-PEC) were found to occur in sewage sludge, with 0.2 µg/kg of nano-Ag, 400 µg/kg of PLGA, 33 µg/kg of Fe₃O₄PEG-PLGA, 0.007 µg/kg of MgHA-collagen, and 2.9 µg/kg of PLLA-Ag. PLGA exhibited the highest concentration in all environmental compartments except natural and urban soil, where nano-Ag showed the highest concentration. The results showed that the distribution of NBMs into different environmental and technical compartments is strongly dependent on their type of application.

Tranilast ameliorated subchronic silver nanoparticles-induced cerebral toxicity in rats: Effect on TLR4/NLRP3 and Nrf-2

Silver nanoparticles (AgNPs) are widely applied in various aspects of life. However, recent studies reported their potential toxicity both on environment and human health. The present study aimed to unravel the underlying molecular mechanisms involved in AgNPs-induced brain toxicity. Moreover, chemopreventive effect of tranilast, an analogue of tryptophan metabolite and a mast cell membrane stabilizer was evaluated. Thirty Sprague Dawley rats were enrolled equally into Normal control group, AgNPs-intoxicated group (50 mg/kg, 3 times/week) and tranilast (300 mg/kg, 3 times/week)+AgNPs group. AgNPs administration triggered brain oxidative stress as depicted by reduced Nrf-2 expression, decreased TAC and GSH as well as upregulated brain lipid peroxidation. The apparent brain oxidative damage was accompanied by elevated levels of inflammatory cytokines (IL-1β, IL-6 and TNF-α). Moreover, brain levels of TLR4, NLRP3 and caspase-1 were up-regulated. Additionally, histological study indicated marked cellular injury in cerebrum and cerebellum specimens. This was concomitant with elevated serum CK activity and CK-BB level. On the other hand, tanilast administration remarkably alleviated AgNPs-induced brain toxicity. The present study shed the light on implication of TLR4/NLRP3 axis and NrF2 in AgNPs-induced brain toxicity. In addition, it explored the potential protective effect of tranilast on AgNPs-induced brain injury via antioxidant and anti-inflammatory efficacies.

Risk Management Framework for Nano-Biomaterials Used in Medical Devices and Advanced Therapy Medicinal Products

The convergence of nanotechnology and biotechnology has led to substantial advancements in nano-biomaterials (NBMs) used in medical devices (MD) and advanced therapy medicinal products (ATMP). However, there are concerns that applications of NBMs for medical diagnostics, therapeutics and regenerative medicine could also pose health and/or environmental risks since the current understanding of their safety is incomplete. A scientific strategy is therefore needed to assess all risks emerging along the life cycles of these products. To address this need, an overarching risk management framework (RMF) for NBMs used in MD and ATMP is presented in this paper, as a result of a collaborative effort of a team of experts within the EU Project BIORIMA and with relevant inputs from external stakeholders. The framework, in line with current regulatory requirements, is designed according to state-of-the-art approaches to risk assessment and management of both nanomaterials and biomaterials. The collection/generation of data for NBMs safety assessment is based on innovative integrated approaches to testing and assessment (IATA). The framework can support stakeholders (e.g., manufacturers, regulators, consultants) in systematically assessing not only patient safety but also occupational (including healthcare workers) and environmental risks along the life cycle of MD and ATMP. The outputs of the framework enable the user to identify suitable safe(r)-by-design alternatives and/or risk management measures and to compare the risks of NBMs to their (clinical) benefits, based on efficacy, quality and cost criteria, in order to inform robust risk management decision-making.

Fungus Aspergillus niger Processes Exogenous Zinc Nanoparticles into a Biogenic Oxalate Mineral

Zinc oxide nanoparticles (ZnO NPs) belong to the most widely used nanoparticles in both commercial products and industrial applications. Hence, they are frequently released into the environment. Soil fungi can affect the mobilization of zinc from ZnO NPs in soils, and thus they can heavily influence the mobility and bioavailability of zinc there. Therefore, ubiquitous soil fungus Aspergillus niger was selected as a test organism to evaluate the fungal interaction with ZnO NPs. As anticipated, the A. niger strain significantly affected the stability of particulate forms of ZnO due to the acidification of its environment. The influence of ZnO NPs on fungus was compared to the aqueous Zn cations and to bulk ZnO as well. Bulk ZnO had the least effect on fungal growth, while the response of A. niger to ZnO NPs was comparable with ionic zinc. Our results have shown that soil fungus can efficiently bioaccumulate Zn that was bioextracted from ZnO. Furthermore, it influences Zn bioavailability to plants by ZnO NPs transformation to stable biogenic minerals. Hence, a newly formed biogenic mineral phase of zinc oxalate was identified after the experiment with A. niger strain’s extracellular metabolites highlighting the fungal significance in zinc biogeochemistry.

Key principles and operational practices for improved nanotechnology environmental exposure assessment

Nanotechnology is identified as a key enabling technology due to its potential to contribute to economic growth and societal well-being across industrial sectors. Sustainable nanotechnology requires a scientifically based and proportionate risk governance structure to support innovation, including a robust framework for environmental risk assessment (ERA) that ideally builds on methods established for conventional chemicals to ensure alignment and avoid duplication. Exposure assessment developed as a tiered approach is equally beneficial to nano-specific ERA as for other classes of chemicals. Here we present the developing knowledge, practical considerations and key principles need to support exposure assessment for engineered nanomaterials for regulatory and research applications.

Dynamic probabilistic material flow analysis of engineered nanomaterials in European waste treatment systems

Knowledge on the material flows of engineered nanomaterials (ENMs) is crucial for assessing their environmental risks. Waste management processes constitute important parts of material flow analyses as they affect large fractions of the ENMs. Accordingly, their detailed representation could substantially improve the models. Our goal was to consider the temporal variations of wastewater and solid waste management in the dynamic probabilistic material flow analysis of carbon nanotubes (CNTs), nano-Ag, -TiO₂ and -ZnO in Europe from 2000 to 2020. New input parameters included wastewater and solid waste management rates for each year. The uncertainties associated with these data were assessed based on the type of consulted source, the geographical representativeness and temporal concordance. Results show modal values of 10-27% of ENMs going from sorting to reprocessing. Large shares of environmental releases of nano-Ag and nano-ZnO end in surface water (4.9 t and 1700 t respectively in 2020), while sludge-treated soil as environmental compartment is receiving most of nano-TiO₂ (22,000 t in 2020) and CNTs (8.8 t in 2020). Discharges from wastewater management to the subsurface soil make this compartment the largest environmental sink of nano-Ag and nano-ZnO (30 t and 3860 t accumulated in 2020, respectively). Landfills represent significant stocks of ENMs, with 105 t, 2077 t, 69,000 t and 1042 t of nano-Ag, nano-ZnO, nano-TiO₂ and CNTs. This model includes detailed descriptions of waste management and sources of ENMs released at the European scale. However, a better understanding of the behaviour, i.e. fate and potential transformations of ENMs in reprocessing systems, is needed to complete the full assessment.

Chronic effects of wastewater-borne silver and titanium dioxide nanoparticles on the rainbow trout (Oncorhynchus mykiss)

Even though nanoparticles (NPs) are mostly removed by wastewater treatment plants, wastewater-borne NPs may show an altered toxicity to aquatic organisms. The main objectives of this work were: i) to assess the chronic (28 days) effects of wastewater-borne NPs of silver (AgNPs, 1.4-36.2 μg L^-1) and titanium dioxide (TiO₂NPs, 3.1-50.2 μg L^-1) at the individual (growth) and biochemical (biomarkers of neurotoxicity, oxidative stress and energy metabolism) levels in rainbow trout Oncorhynchus mykiss; and ii) to compare them with their effluent-supplemented and water-dispersed counterparts. The total Ag and Ti levels were determined in several fish organs. The growth of O. mykiss was not affected by the NPs in any treatment, except a 29% increase at 5.5 μg L^-1 of total Ag supplemented to effluents. The Ag level in organs of O. mykiss was significantly higher after exposure to water-dispersed AgNPs than their wastewater-borne or effluent-supplemented counterparts. No significant Ti uptake could be observed. Effluent-supplemented TiO₂NPs (50.1 μg L^-1 Ti) potentially induced neurotoxic effects, indicated by a 24% increase in acetylcholinesterase activity comparatively to controls. Energy reserves were unaffected by TiO₂ treatments, while nearly all AgNP-containing treatments caused a depletion of total lipids, proteins and carbohydrates in the muscle, suggesting an increased energy demand for detoxification processes to cope with AgNPs. Besides NPs, the effluent matrix and dispersing agent (for AgNPs) induced significant effects on energetic reserves and oxidative stress, indicating background toxicity of both treatments at the biochemical level. Our study is the first to assess chronic effects of wastewater-borne NPs on rainbow trout. While no effects were found at the individual level, several biochemical markers were changed by the NPs exposure. Our results highlight the importance of using complex matrices for a reliable risk assessment of NPs in the aquatic environment.

Sex-dependent and organ-specific toxicity of silver nanoparticles in livers and intestines of adult zebrafish

Silver nanoparticles (AgNPs) have been increasingly manufactured and thus are increasingly detected in aquatic systems. However, there are still some overlooked factors (e.g., organism sex) in the field of nano-toxicological assessment. In this study, to explore the role of sex in nanotoxicity, adult male and female zebrafish were exposed to 100 μg/L of two uncoated commercial AgNPs with primary sizes 20 nm and 80 nm for 2 weeks, after which the impacts of AgNPs on intestines and livers of both male and female zebrafish were assessed using a suite of biomarkers. Results demonstrated that the intestinal Na/K-ATPase activity as well as the superoxide dismutase activity in male zebrafish differed significantly between 20-nm AgNPs and 80-nm AgNPs treatments (p < 0.05), indicating 20-nm AgNPs showing higher toxicity to zebrafish than the 80-nm AgNPs. Also, we noted that the used AgNPs induced sex-dependent effects on growth indices, oxidative/anti-oxidative status, neural signaling and hepatic lipid metabolism, with the male zebrafish being more sensitive to AgNPs than the females. Further, the tested AgNPs impaired the intestine much more seriously than the liver, as evidenced by the disruptions of Na/K-ATPase and antioxidant system in intestine but not in liver. These findings imply that prolonged exposure to AgNPs might induce size-related, sex-dependent, and organ-specific toxicity to adult zebrafish, thereby may significantly extend our understanding of the toxic effects of AgNPs in aquatic environment.

Effects of silver nanoparticles on coupled nitrification-denitrification in suspended sediments

The effects of varying concentrations of Ag NPs on coupled nitrification and denitrification (CND) in two suspended sediments (SPSs) sizes were investigated using isotopic tracer method. In general, 0.5 and 5 mg/L Ag NPs had less effect on CND, while 2 and 10 mg/L Ag NPs exhibited the improvement and inhibition effect, respectively. The CND improvement by 2 mg/L NPs was mainly due to the enhanced nitrifying and denitrifying enzyme activity. However, 10 mg/L Ag NPs inhibited NH₄⁺ oxidation by directly reducing the AMO activity and AOB abundance. The inhibition on NAR and NIR activity and their encoding narG and nirK gene abundance further inhibited NO₃^- and NO₂^- reduction, leading to a dramatic decrease in the ¹⁵N-N₂ production. The above inhibition effects were attributed to the nano-effects of Ag NPs, which led to the excessive ROS amount and the decreased T-AOC level in microbial systems. But the connection between nitrification and denitrification was not broken after Ag NPs exposure. Moreover, the results indicated that N-cycling in clay and silt-type SPS systems could be more sensitive than sand-type SPS systems to NP exposure. The findings provide a basis for evaluating the environmental risks of Ag NPs in water-sediment systems.

Bioaccumulation kinetics and tissue distribution of silver nanoparticles in zebrafish: The mechanisms and influence of natural organic matter

The wide application of silver nanoparticles (AgNPs) has inevitably led to their release into the natural aquatic environment. Natural organic matter (NOM) is ubiquitous and would influence the fate and effects of these nanoparticles in such aquatic environments. Here we demonstrate that NOM plays an important role in the bioaccumulation kinetics and tissue distribution of AgNPs in zebrafish. In the presence of humic acid and fulvic acid, the uptake rates of AgNPs decreased while the depuration rates of AgNPs increased. As a result, the bioconcentration factor (BCF) of AgNPs in the entire body of the zebrafish was reduced. AgNPs were mainly taken up by the zebrafish via oral ingestion and were greatly accumulated in the liver, intestine and gill. In the intestine, NOM effectively inhibited the AgNPs from penetrating the cell membranes into internal tissues and also suppressed the disintegration and dissolution of AgNPs in gastrointestinal fluid, thereby decreasing the absorption of Ag by zebrafish. This research underlines the significance of incorporating the effects of NOM into predictive models for accurately assessing the toxicity and ecological risks of nanoparticles in natural aquatic environments.

TiO2 nanoparticles accelerate methanogenesis in mangrove wetlands sediment

In this study, the response of methane (CH₄) production to the addition of titanium dioxide nanoparticles (TiO₂ NPs) with three types of short-chain fatty acids (sodium acetate, sodium propionate and sodium butyrate) as carbon sources in mangrove sediment was investigated. The results showed that the maximum CH₄ formation rate increased by 45.2%, 32.7% and 48.6% and the maximum cumulative CH₄ production increased by 25.2%, 7.7% and 6.3% with the addition of TiO₂ NPs in the sodium acetate, sodium propionate and sodium butyrate systems, respectively. The microbial community analysis revealed that the electrogenic bacteria Proteiniclasticum and Pseudomonas, butyrate oxidizing bacteria Syntrophomonas and methanogens Methanobacterium and Methanosarcina were significantly enriched in the presence of TiO₂ NPs, indicating that TiO₂ NPs can enhance CH₄ production by stimulating the growth of different species of methanogens and butyrate oxidizing bacteria. The enlarged distance between microbes, the enhanced conductivity of the sediment and the typical microorganisms for direct interspecies electron transfer (DIET) with the addition of TiO₂ NPs suggest that the promoted DIET between distinct microorganisms could be another possible explanation for the improvement in CH₄ production. It can be speculated that a weaker effect on methanogenesis increases under the natural concentration of TiO₂ NPs compared with the experimental conditions; however, the amounts of TiO₂ NPs are increasing enriched in wetland environments. Therefore, the findings of this study increase current knowledge about the effect of nanomaterials on global CH₄ emissions and suggest that the discharge of wastewater containing TiO₂ NPs from the synthesis and incorporation of TiO₂ NPs in customer products needs to be monitored.

Metal-based engineered nanoparticles in the drinking water treatment systems: A critical review

The emergence of nanotechnologically-enabled materials, compounds or products inevitably leads to engineered nanoparticles (ENPs) released into surface waters. ENPs have already been detected in wastewater streams, drinking water sources and even in tap water at concentrations in the ng/L and μg/L range, making the latter a potential route for humans. The presence of ENPs in raw waters raises concerns over the possibility that ENPs might pose a hazard to the quality and security of drinking water and whether drinking water treatment plants (DWTPs) are prepared to handle this problem. Therefore, it is essential to critically evaluate if ENPs can be effectively removed through water treatment processes to control environmental and human health risks associated with their release. This review includes a summary of the available information on production, presence, potential hazards to human health and environment, and release and behaviour of metal-based ENPs in surface waters and drinking water. In addition, the most extensively studied water treatment processes to remove metal-based ENPs, specifically conventional and advanced processes, are discussed and highlighted in detail. Furthermore, this work identifies the research gaps regarding ENPs removal in DWTPs and discusses future aspects of ENPs in water treatment.

Fragmentation of polymer nanocomposites: modulation by dry and wet weathering, fractionation, and nanomaterial filler

In recent years, an increasing number of polymeric composites incorporating engineered nanomaterials (ENMs) have reached the market. Such nano-enabled products (NEPs) present enhanced performance through improved mechanical, thermal, UV protection, electrical, and gas barrier properties. However, little is known about how environmental weathering impacts ENM release, especially for high-tonnage NEPs like kaolin products, which have not been extensively examined by the scientific community. Here we study the simulated environmental weathering of different polymeric nanocomposites (epoxy, polyamide, polypropylene) filled with organic (multiwalled carbon nanotube, graphene, carbon black) and inorganic (WS2, SiO2, kaolin, Fe2O3, Cu-phthalocyanines) ENMs. Multiple techniques were employed by researchers at three laboratories to extensively evaluate the effect of weathering: ultraviolet-visible spectroscopy (UV-vis), Fourier transform infrared spectroscopy (FTIR), optical microscopy, contact angle measurements, gravimetric analysis, analytical ultracentrifugation (AUC), transmission electron microscopy (TEM), scanning electron microscopy (SEM) and Raman spectroscopy. This work aimed to elucidate the extent to which weathering protocol (i.e. wet vs. dry) and diverse filler characteristics modulate fragment release and polymer matrix degradation. In doing so, it expanded the established NanoRelease protocol, previously used for analyzing fragment emission, by evaluating two significant additions: (1) simulated weathering with rain events and (2) fractionation of sample leachate prior to analysis. Comparing different composite materials and protocols demonstrated that the polymer matrix is the most significant factor in NEP aging. Wet weathering is more realistic than dry weathering, but dry weathering seems to provide a more controlled release of material over wet. Wet weathering studies could be complicated by leaching, and the addition of a fractionation step can improve the quality of UV-vis measurements.

The Toxicity of Nanoparticles to Organisms in Freshwater

Nanotechnology is a rapidly growing industry yielding many benefits to society. However, aquatic environments are at risk as increasing amounts of nanoparticles (NPs) are contaminating waterbodies causing adverse effects on aquatic organisms. In this review, the impacts of environmental exposure to NPs, the influence of the physicochemical characteristics of NPs and the surrounding environment on toxicity and mechanisms of toxicity together with NP bioaccumulation and trophic transfer are assessed with a focus on their impacts on bacteria, algae and daphnids. We identify several gaps which need urgent attention in order to make sound decisions to protect the environment. These include uncertainty in both estimated and measured environmental concentrations of NPs for reliable risk assessment and for regulating the NP industry. In addition toxicity tests and risk assessment methodologies specific to NPs are still at the research and development stage. Also conflicting and inconsistent results on physicochemical characteristics and the fate and transport of NPs in the environment suggest the need for further research. Finally, improved understanding of the mechanisms of NP toxicity is crucial in risk assessment of NPs, since conventional toxicity tests may not reflect the risks associated with NPs. Behavioural effects may be more sensitive and would be efficient in certain situations compared with conventional toxicity tests due to low NP concentrations in field conditions. However, the development of such tests is still lacking, and further research is recommended.

Meta-Analysis of Pharmacokinetic Studies of Nanobiomaterials for the Prediction of Excretion Depending on Particle Characteristics

The growth in development and use of nanobiomaterials (NBMs) has raised questions regarding their possible distribution in the environment. Because most NBMs are not yet available on the market and exposure monitoring is thus not possible, prospective exposure modeling is the method of choice to get information on their future environmental exposure. An important input for such models is the fraction of the NBM excreted after their application to humans. The aim of this study was to analyze the current literature on excretion of NBMs using a meta-analysis. Published pharmacokinetic data from in vivo animal experiments was collected and compiled in a database, including information on the material characteristics. An evaluation of the data showed that there is no correlation between the excretion (in % of injected dose, ID) and the material type, the dose, the zeta potential or the size of the particles. However, the excretion is dependent on the type of administration with orally administered NBMs being excreted to a larger extent than intravenously administered ones. A statistically significant difference was found for IV vs. oral and oral vs. inhalation. The database provided by this work can be used for future studies to parameterize the transfer of NBMs from humans to wastewater. Generic probability distributions of excretion for oral and IV-administration are provided to enable excretion modeling of NBMs without data for a specific NBM.

Transformation and release of nanoparticle additives & byproducts from commercially available surface coatings on pressure treated lumber via dermal contact

Production and marketing of "nano-enabled" products for consumer purchase has continued to expand. However, many questions remain about the potential release and transformation of these nanoparticle (NP) additives from products throughout their lifecycle. In this work, two surface coating products advertised as containing ZnO NPs as active ingredients, were applied to micronized copper azol (MCA) and aqueous copper azol (ACA) pressure treated lumber. Coated lumber was weathered outdoors for a period of six months and the surface was sampled using a method developed by the Consumer Product Safety Commission (CPSC) to track potential human exposure to ZnO NPs and byproducts through simulated dermal contact. Using this method, the total amount of zinc extracted during a single sampling event was <1 mg/m² and no evidence of free ZnO NPs was found. Approximately 0.5% of applied zinc was removed via simulated dermal contact over 6-months, with increased weathering periods resulting in increased zinc release. XAFS analysis found that only 27% of the zinc in the as received coating could be described as crystalline ZnO and highlights the transformation of these mineral phases to organically bound zinc complexes during the six-month weathering period. Additionally, SEM images collected after sampling found no evidence of free NP ZnO release during simulated dermal contact. Both simulated dermal contact experiments, and separate leaching studies demonstrate the application of surface coating solutions to either MCA and ACA lumber will reduce the release of copper from the pressure treated lumber. This work provides clear evidence of the transformation of NP additives in consumer products during their use stage.

Phytotoxicity induced by engineered nanomaterials as explored by metabolomics: Perspectives and challenges

Given the wide applications of engineered nanomaterials (ENMs) in various fields, the ecotoxicology of ENMs has attracted much attention. The traditional plant physiological activity (e.g., reactive oxygen species and antioxidant enzymes) are limited in that they probe one specific process of nanotoxicity, which may result in the loss of understanding of other important biological reactions. Metabolites, which are downstream of gene and protein expression, are directly related to biological phenomena. Metabolomics is an easily performed and efficient tool for solving the aforementioned problems because it involves the comprehensive exploration of metabolic profiles. To understand the roles of metabolomics in phytotoxicity, the analytical methods for metabolomics should be organized and discussed. Moreover, the dominant metabolites and metabolic pathways are similar in different plants, which determines the universal applicability of metabolomics analysis. The analysis of regulated metabolism will globally and scientifically help determine the ecotoxicology that is induced by ENMs. In the past several years, great developments in nanotoxicology have been achieved using metabolomics. However, many knowledge gaps remain, such as the relationships between biological responses that are induced by ENMs and the regulation of metabolism (e.g., carbohydrate, energy, amino acid, lipid and secondary metabolism). The phytotoxicity that is induced by ENMs has been explored by metabolomics, which is still in its infancy. The detrimental and defence mechanisms of plants in their response to ENMs at the level of metabolomics also deserve much attention. In addition, owing to the regulation of metabolism in plants by ENMs affected by multiple factors, it is meaningful to uniformly identify the key influencing factor.