Point Defects and Green Emission in Zero-Dimensional Perovskites

Shape-controlled, water-assisted synthesis of 2D luminescent CsPb2Br5 perovskite microcrystals for highly responsive UV detectors

Cesium-lead-halide (Cs-Pb-Br) perovskites have been a point of interest for researchers since their discovery for their extraordinary optical and electronic properties. Unlike other members of the Cs-Pb-Br family, CsPb2Br5 is less explored. Herein, we synthesized 2D CsPb2Br5 in an aqueous medium under ambient conditions. The fabrication was confirmed via several characterization techniques. Optical characterization was performed using UV, PL, and TCSPC analysis. Morphological study was conducted using FE-SEM and TEM analysis, which revealed a new square-pyramidal-like morphology. The structural stability of the material under ambient conditions was studied for an extended period to show its reliability in a practical environment. Moreover, the synthesized microcrystals were utilized to fabricate a highly responsive UV detector with significantly low rise and fall times of 1.2 and 2.6 ms, respectively, and a detectivity of 2.36 × 108 Jones.

Strong Dependence of Point Defect Properties in Metal Halide Perovskites on Description of van der Waals Interaction

Weaker than ionic and covalent bonding, van der Waals (vdW) interactions can have a significant impact on structure and function of molecules and materials, including stabilities of conformers and phases, chemical reaction pathways, electro-optical response, electron-vibrational dynamics, etc. Metal halide perovskites (MHPs) are widely investigated for their excellent optoelectronic properties, stemming largely from high defect tolerance. Although MHPs are primarily ionic compounds, we demonstrate that vdW interactions contribute ∼5% to the total energy, and that static, dynamics, electronic and optical properties of point defects in MHPs depend significantly on the vdW interaction model used. Focusing on widely studied CsPbBr3 with the common Br vacancy and interstitial defects, we compare the PBE, PBE+D3, PBE+TS, PBE+TS/HI and PBE+MBD-NL models and show that vdW interactions strongly alter the global and local geometric structure, and change the fundamental bandgap, midgap state energies and electron-vibrational coupling. The vdW interaction sensitivity stems from involvement of heavy and highly polarizable chemical elements and the soft MHP structure.

Tunable Emissive CsPbBr3/Cs4PbBr6 Quantum Dots Engineered by Discrete Phase Transformation for Enhanced Photogating in Field-Effect Phototransistors

Precise control of quantum structures in hybrid nanocrystals requires advancements in scientific methodologies. Here, on the design of tunable CsPbBr3/Cs4PbBr6 quantum dots are reported by developing a unique discrete phase transformation approach in Cs4PbBr6 nanocrystals. Unlike conventional hybrid systems that emit solely in the green region, this current strategy produces adjustable luminescence in the blue (450 nm), cyan (480 nm), and green (510 nm) regions with high photoluminescence quantum yields up to 45%, 60%, and 85%, respectively. Concentration-dependent studies reveal that phase transformation mechanisms and the factors that drive CsBr removal occur at lower dilutions while the dissolution-recrystallization process dominates at higher dilutions. When the polymer-CsPbBr3/Cs4PbBr6 integrated into a field-effected transistor the resulting phototransistors featured enhanced photosensitivity exceeding 105, being the highest reported for an n-type phototransistor, while maintaining good transistor performances as compared to devices consisting of polymer-CsPbBr3 NCs.

Cold-Sintered All-Inorganic Perovskite Bulk Composite Scintillators for Efficient X-ray Imaging

Cost-effective bulk scintillators with high density, large-area, and long-term stability are desirable for high-energy radiation detections. Conventional bulk polycrystalline or single-crystal scintillators are generally synthesized by high-temperature approaches, and it is challenging to realize simultaneously high detectivity/responsivity, spatial resolution, and rapid time response. Here, we report the cold sintering of bulk scintillators (at 90 °C) based on an "emitter-in-matrix" principle, in which emissive CsPbBr3 nanocrystals are embedded in a durable and transparent Cs4PbBr6 matrix. These bulk scintillators exhibit high light yield (33,800 photons MeV-1), low detection limit (79 nGyair s-1), fast decay time (9.8 ns), and outstanding spatial resolution of 8.9 lp mm-1 to X-ray radiation and an energy resolution of 19.3% for γ-ray (59.6 keV) detection. The composite scintillator also shows exceptional stability against environmental degradation and cyclic X-ray radiation. Our results demonstrate a cost-effective strategy for developing perovskite-based bulk transparent scintillators with exceptional performance and high radioluminescence stability for high-energy radiation detection and imaging.

Operando spectroscopic characterization of formamidinium lead iodide perovskite quantum dots for tracking electrochemical reactions

Multidimensional ABX3 hybrid perovskites three-dimensionally confined dot-shaped structure demonstrate versatile potential to photoelectrochemical cells for water splitting, hydrogen generation, solar cells, and light-emitting diodes. To apply perovskite quantum dots (PQDs) to solar-driven chemistry and optoelectronic devices, understanding the photoinduced charge carrier dynamics of PQDs under electrochemical conditions or applied bias are important. In this study, the detailed transformation mechanism of formamidinium lead iodide perovskite quantum dots under electrochemical conditions was studied by tracking the products of the reaction through cyclic voltammetry, X-ray photoemission spectroscopy, in-situ UV-visible spectroelectrochemistry, etc. Through comprehensive characterizations, the mechanism of irreversible oxidative transformation of perovskite quantum dots was presented. This study provides deeper insight into the electrochemical behavior of PQDs for successful solar-driven chemistry and optoelectronic device applications.

Mapping emission heterogeneity in layered halide perovskites using cathodoluminescence

Recent advancements in the fabrication of layered halide perovskites and their subsequent modification for optoelectronic applications have ushered in a need for innovative characterisation techniques. In particular, heterostructures containing multiple phases and consequently featuring spatially defined optoelectronic properties are very challenging to study. Here, we adopt an approach centered on cathodoluminescence, complemented by scanning electron microscopy coupled with energy-dispersive x-ray spectroscopy analysis. Cathodoluminescence enables assessment of local emission variations by injecting charges with a nanometer-scale electron probe, which we use to investigate emission changes in three different systems: PEA2PbBr4, PEA2PbI4and lateral heterostructures of the two, fabricated via halide substitution. We identify and map different emission bands that can be correlated with local chemical composition and geometry. One emission band is characteristic of bromine-based halide perovskite, while the other originates from iodine-based perovskite. The coexistence of these emissions bands in the halide-substituted sample confirms the formation of lateral heterostructures. To improve the signal quality of the acquired data, we employed multivariate analysis, specifically the non-negative matrix factorization algorithm, on both cathodoluminescence and compositional datasets. The resulting understanding of the halide replacement process and identification of potential synergies in the optical properties will lead to optimised architectures for optoelectronic applications.

Controlled Synthesis of Lead-Free Double Perovskite Colloidal Nanocrystals for Nonvolatile Resistive Memory Devices

Although lead-free double perovskites such as Cs2AgBiBr6 have been widely explored, they still remain a daunting challenge for the controlled synthesis of lead-free double perovskite nanocrystals with highly tunable morphology and band structure. Here, we report the controlled synthesis of lead-free double perovskite colloidal nanocrystals including Cs2AgBiBr6 and Cs2AgInxBi1-xBr6 via a facile wet-chemical synthesis method for the fabrication of high-performance nonvolatile resistive memory devices. Cs2AgBiBr6 colloidal nanocrystals with well-defined cuboidal, hexagonal, and triangular morphologies are synthesized through a facile wet-chemical approach by tuning the reaction temperature from 150 to 190 °C. Further incorporating indium into Cs2AgBiBr6 to synthesize alloyed Cs2AgInxBi1-xBr6 nanocrystals not only can induce the indirect-to-direct bandgap transition with enhanced photoluminescence but also can improve its structural stability. After optimizing the active layers and device structure, the fabricated Ag/polymethylene acrylate@Cs2AgIn0.25Bi0.75Br6/ITO resistive memory device exhibits a low power consumption (the operating voltage is ∼0.17 V), excellent cycling stability (>10 000 cycles), and good synaptic property. Our study would enable the facile wet-chemical synthesis of lead-free double perovskite colloidal nanocrystals in a highly controllable manner for the development of high-performance resistive memory devices.

Case of the Bromine Vacancy in Cs4PbBr6

Typically defect tolerance is equated with a lack of deleterious defects or with abundant defects creating only shallow levels. Here, we address the idea that deep defects, when unavoidable, do not guarantee harmful consequences. Using halogen vacancy as a common defect among halides, we explore its behavior in Cs4PbBr6. It is a large gap material (band gap of ∼4 eV) known for its green emission at ∼520 nm. We show that its Br-vacancy is indeed a deep defect as obtained from hybrid density functional calculations. An analysis of the configuration coordinate diagram corresponding to the defect's charge transition levels enables us to conclude that the nonradiative recombination cycle will be hampered by an extremely slow hole capture process. Therefore, Br-vacancy will not suppress light emission in Cs4PbBr6. Although this finding does not signal that all deep defects will behave similarly, it indicates that defect tolerance may be achievable despite their occurrence.

Structural Features and Optical Properties of All-Inorganic Zero-Dimensional Halides Cs4PbBr6-xIx Obtained by Mechanochemistry

Despite the great success of hybrid CH3NH3PbI3 perovskite in photovoltaics, ascribed to its excellent optical absorption properties, its instability toward moisture is still an insurmountable drawback. All-inorganic perovskites are much less sensitive to humidity and have potential interest for solar cell applications. Alternative strategies have been developed to design novel materials with appealing properties, which include different topologies for the octahedral arrangements from three-dimensional (3D, e.g., CsPbBr3 perovskite) or two-dimensional (2D, e.g., CsPb2Br5) to zero-dimensional (0D, i.e., without connection between octahedra), as the case of Cs4PbX6 (X = Br, I) halides. The crystal structure of these materials is complex, and their thermal evolution is unexplored. In this work, we describe the synthesis of Cs4PbBr6-xIx (x = 0, 2, 4, 6) halides by mechanochemical procedures with green credentials; these specimens display excellent crystallinity enabling a detailed structural investigation from synchrotron X-ray powder diffraction (SXRD) data, essential to revisit some features in the temperature range of 90-298 K. In all this regime, the structure is defined in the trigonal R3̅c space group (#167). The presence of Cs and X vacancies suggests some ionic mobility into the crystal structure of these 0D halides. Bond valence maps (BVMs) are useful in determining isovalent surfaces for both Cs4PbBr6 and Cs4PbI6 phases, unveiling the likely ionic pathways for cesium and bromide ions and showing a full 3D connection in the bromide phase, in contrast to the iodide one. On the other hand, the evolution of the anisotropic displacement parameters is useful to evaluate the Debye temperatures, confirming that Cs atoms have more freedom to move, while Pb is more confined at its site, likely due to a higher covalency degree in Pb-X bonds than that in Cs-X bonds. Diffuse reflectance ultraviolet-visible (UV-vis) spectroscopy shows that the optical band gap can be tuned depending on iodine content (x) in the range of 3.6-3.06 eV. From density functional theory (DFT) simulations, the general trend of reducing the band gap when Br is replaced by I is well reproduced.

Highly Emissive Zero-Dimensional Cesium Lead Iodide Perovskite Nanocrystals with Thermally Activated Delayed Photoluminescence

We utilized a modified reverse-microemulsion method to develop highly emissive and photostable zero-dimensional (0D) Cs₄Pb(Br_1-xI_x)₆ perovskite nanocrystals (PNCs). We employed single-particle photoluminescence (PL) spectroscopy to explore blinking statistics and demonstrate single-photon emission from individual PNCs. Low-temperature blinking and photon correlation studies revealed a transition from single- to multiphoton emission with progressively longer "delayed" PL components, reaching ∼70 ns at room temperature and representing a distinctive behavior to previously known iodide PNCs. Such thermally activated PL emission is explained by the existence of defect-related "reservoir" states, feeding back into the PNC's emissive state and providing multiple photons within a single excitation cycle. This work establishes a new member in the 0D class of perovskite materials, studies its photophysical properties, and reveals its potential for future optoelectronic applications.

Self-assembled CsPbBr3 quantum dots with wavelength-tunable photoluminescence for efficient active jamming

CsPbBr₃ perovskite quantum dots (QDs) show great potential in various applications due to their size-dependent and excellent optoelectronic properties. However, it is still challenging to synthesize size-tunable CsPbBr₃ QDs with purple emission. Herein, CsPbBr₃ nanospheres (NS) with purple emission (432 nm) and wavelength-tunable photoluminescence were synthesized using a two-step recrystallization method for the first time. A nanocube (NC) strategy resulting from CsPbBr₃ nanosphere self-assembly via polar solvent-induced surface ligand mismatch was proposed. The self-assembly process endows the QDs with wavelength-tunable photoluminescence ranging from 432 to 518 nm. The significant reduction in defects during self-assembly was confirmed by transient optical spectroscopy measurements, photoluminescence quantum yields (PLQY), and the disappearance of tail bands in the long-wavelength region of the photoluminescence (PL) spectrum. This theory demonstrated that the decrease in high defect surfaces and increase in specific surface area were the reasons for the decline in defects. Most importantly, these QDs could be used for the active jamming of optical imaging systems based on charged-coupled devices (CCDs), including laser imaging radar and low light level (LLL) night vision systems. QDs significantly increase the mean square error (MSE) of the image, while the detection rate of the target by the artificial intelligence algorithm decreased by 95.17%. The wide wavelength tunable emission caused by structural changes makes it arduous for silicon-based detectors to avoid the interference of QDs by adding filters or by other means.

Highly luminescent dual-phase CsPbBr3/Cs4PbBr6 microcrystals for a wide color gamut for backlight displays

Cesium lead bromide perovskite nanocrystals (NCs) embedded in Cs₄PbBr₆ or CsPb₂Br₅ matrices forming core/shell structures are promising luminescent materials that exhibit remarkable photoluminescence properties meeting the need in a wide range of applications while overcoming stability challenges. Here, we report the large-scale, ligand-free synthesis of dual-phase Cs₄PbBr₆/CsPbBr₃ microcrystals (MCs) using ultrasonication at room temperature, exhibiting a high photoluminescence quantum yield (PLQY) of 82.7% and good stability. High-resolution transmission electron microscopy and X-ray photoelectron characterization confirm that CsPbBr₃ NCs are embedded in the Cs₄PbBr₆ matrix-forming CsPbBr₃/Cs₄PbBr₆ dual-phase structure. The evolution of the luminescence properties with temperature suggests that the strong green emission results from direct exciton recombination in the isolated [PbBr₆]^4- octahedra, which possess a large exciton binding energy of 283.6 meV. As revealed from their emission intensities, the dual-phase CsPbBr₃/Cs₄PbBr₆ MCs demonstrate excellent stability against ultraviolet irradiation (76%), good moisture resistance (42.7%), and good thermal tolerance (51%). It is understood that such excellent PLQY and stability are due to the surface passivation of the CsPbBr₃ NCs attributed to the large bandgap as well as the isolated [PbBr₆]^4- octahedra separated by Cs⁺ ions in the Cs₄PbBr₆ crystal lattice. Finally, the suitability of the green-emitting CsPbBr₃/Cs₄PbBr₆ material for achieving white-light emission and a wide color gamut is evaluated by constructing a prototype white light-emitting diode (w-LED) using CsPbBr₃/Cs₄PbBr₆ and red-emitting K₂SiF₆:Mn⁴⁺ materials taken in different weight ratios and combined with a blue light-emitting InGaN LED chip (λ = 455 nm). The constructed w-LED device exhibits the color coordinates (0.3315, 0.3289), an efficacy of 68 lm W^-1, a color rendering index of 87%, a color temperature of 5564 K, and a wide color gamut of ∼118.78% (NTSC) and ∼88.69% (Rec. 2020) with RGB color filters in the CIE 1931 color space. Therefore, based on our present findings, we strongly believe that the dual-phase CsPbBr₃/Cs₄PbBr₆ material is a promising green-emitting phosphor for use in w-LEDs as the backlight of display systems.

Mechanochemistry-driven engineering of 0D/3D heterostructure for designing highly luminescent Cs–Pb–Br perovskites

Embedding metal-halide perovskite particles within an insulating host matrix has proven to be an effective strategy for revealing the outstanding luminescence properties of perovskites as an emerging class of light emitters. Particularly, unexpected bright green emission observed in a nominally pure zero-dimensional cesium–lead–bromide perovskite (Cs₄PbBr₆) has triggered intensive research in better understanding the serendipitous incorporation of emissive guest species within the Cs₄PbBr₆ host. However, a limited controllability over such heterostructural configurations in conventional solution-based synthesis methods has limited the degree of freedom in designing synthesis routes for accessing different structural and compositional configurations of these host–guest species. In this study, we provide means of enhancing the luminescence properties in the nominal Cs₄PbBr₆ powder through a guided heterostructural configuration engineering enabled by solid-state mechanochemical synthesis. Realized by an in-depth study on time-dependent evaluation of optical and structural properties during the synthesis of Cs₄PbBr₆, our target-designed synthesis protocol to promote the endotaxial formation of Cs₄PbBr₆/CsPbBr₃ heterostructures provides key insights for understanding and designing kinetics-guided syntheses of highly luminescent perovskite emitters for light-emitting applications.

While emission and stability of metal–halide perovskites can be enhanced through heterostructural encapsulation, a controlled synthesis route to such structures is not trivial to realize. Here, the authors design a mechanochemistry-driven protocol for synthesizing highly luminescent CsPbBr₃/Cs₄PbBr₆ heterostructures.

Stable Core-Shell Structure Nanocrystals of Cs4PbBr6-Zn(moi)2 Achieved by an In Situ Surface Reconstruction Strategy for Optical Anticounterfeiting

Zero-dimensional Cs₄PbBr₆ nanocrystals (NCs) possess attractive photoluminescence (PL) properties and feature facile chemical synthesis, making them promising for application in luminescent materials. However, Cs₄PbBr₆ remains sensitive to polar solvents and thermal stimuli because of soft ionic nature of Cs₄PbBr₆ and dynamic behavior of surface ligands. Herein, a strategy controlled by an in situ surface coordination reaction is developed to fabricate stable NCs with a Cs₄PbBr₆-Zn(moi)₂ core-shell structure. It was found that the Cs₄PbBr₆ surface regulated by the use of 2-mercaptoimidazole (called moi) and the coordination between the -NH group of moi and Zn²⁺ is critical for the formation of Cs₄PbBr₆-Zn(moi)₂ core-shell NCs. Meanwhile, the thickness of the Zn(moi)₂ shell can be facilely controlled by the growth time because of the solubility of moi and Zn(OAc)₂·2H₂O in ethyl acetate. Compared to bare Cs₄PbBr₆, Cs₄PbBr₆-Zn(moi)₂ NCs exhibited highly improved polar solvent resistance and thermal stability. By combining the sensitivity of Cs₄PbBr₆ and the stability of Cs₄PbBr₆-Zn(moi)₂, we used two NCs as PL security inks to fabricate optical anticounterfeiting labels. Thus, the disposable or reusable optical anticounterfeiting label is achieved by changing the external dual-stimuli. This work provides a novel strategy to enhance the stability of Cs₄PbBr₆ and develop its potential interest for application in anticounterfeiting technologies.

Highly efficient green emission Cs4PbBr6 quantum dots with stable water endurance

To date, quantum dots (QDs) based on perovskite materials with high photoluminescence quantum yield (PLQY) and stability have rarely been reported. In this work, Cs₄PbBr₆ QDs glass ceramic with high PLQY and water stability is obtained, and the research results confirm that the strong green emission originates from the trapping of free excitons by internal Br vacancies. The rise of Br vacancies and the spontaneous growth of multi-morphology Cs₄PbBr₆ QDs under the influence of air humidity increase the PLQY to 89.62%. Compared with pure QDs, the Cs₄PbBr₆ QDs maintain high-intensity luminescence after being immersed in water for up to 150 days. In short, this paper puts forward a new, to the best of our knowledge, and valuable perspective for investigating the luminescence of Cs₄PbBr₆ QDs glass ceramic derived from related work.

Stable and Bright Electroluminescent Devices utilizing Emissive 0D Perovskite Nanocrystals Incorporated in a 3D CsPbBr3 Matrix

The 0D cesium lead halide perovskite Cs₄ PbBr₆ has drawn remarkable interest due to its highly efficient robust green emission compared to its 3D CsPbBr₃ counterpart. However, seizing the advantages of the superior photoluminescence properties for practical light-emitting devices remains elusive. To date, Cs₄ PbBr₆ has been employed only as a higher-bandgap nonluminescent matrix to passivate or provide quantum/dielectric confinement to CsPbBr₃ in light-emitting devices and to enhance its photo-/thermal/environmental stability. To resolve this disparity, a novel solvent engineering method to incorporate highly luminescent 0D Cs₄ PbBr₆ nanocrystals (perovskite nanocrystals (PNCs)) into a 3D CsPbBr₃ film, forming the active emissive layer in single-layer perovskite light-emitting electrochemical cells (PeLECs) is designed. A dramatic increase of the maximum external quantum efficiency and luminance from 2.7% and 6050 cd m^-2 for a 3D-only PeLEC to 8.3% and 11 200 cd m^-2 for a 3D-0D PNC device with only 7% by weight of 0D PNCs is observed. The majority of this increase is driven by the efficient inherent emission of the 0D PNCs, while the concomitant morphology improvement also contributes to reduced leakage current, reduced hysteresis, and enhanced operational lifetime (half-life of 129 h), making this one of the best-performing LECs reported to date.

Different photocurrent response of Cs4PbBr6 particles

Zero-dimensional (0D) all-inorganic cesium lead halide perovskites, particularly Cs₄PbBr₆, have been attracting wide attention due to their excellent optical properties and stability. The research also focuses on the origin of green emission from Cs₄PbBr₆, which has a bandgap located in the ultraviolet B (UVB) region. So far, both Cs₄PbBr₆ without visible emission and with green emission have been successfully prepared; however, the origin of green emission remains controversial. Photocurrent response is one of the effective approaches to explore how the photo-excited carriers influence the photo-physical properties of materials. In our study, Cs₄PbBr₆ particles without visible emission and with green emission were synthesized and their photocurrent response was investigated. The former showed a positive photocurrent response, while the latter showed a negative photocurrent response. The negative response was believed to be due to a built-in electric field constructed by the charged excitons in green-emissive Cs₄PbBr₆. From our calculations, numerous vacancies of Br are easier to appear in green-emissive Cs₄PbBr₆ lattices, which could combine the neutral excitons to form charged excitons. This work may contribute to the explanation of the origin of green emission of Cs₄PbBr₆ to some extent.

Ultrafast transient infrared spectroscopy for probing trapping states in hybrid perovskite films

Studying the charge dynamics of perovskite materials is a crucial step to understand the outstanding performance of these materials in various fields. Herein, we utilize transient absorption in the mid-infrared region, where solely electron signatures in the conduction bands are monitored without external contributions from other dynamical species. Within the measured range of 4000 nm to 6000 nm (2500-1666 cm-1), the recombination and the trapping processes of the excited carriers could be easily monitored. Moreover, we reveal that within this spectral region the trapping process could be distinguished from recombination process, in which the iodide-based films show more tendencies to trap the excited electrons in comparison to the bromide-based derivatives. The trapping process was assigned due to the emission released in the mid-infrared region, while the traditional band-gap recombination process did not show such process. Various parameters have been tested such as film composition, excitation dependence and the probing wavelength. This study opens new frontiers for the transient mid-infrared absorption to assign the trapping process in perovskite films both qualitatively and quantitatively, along with the potential applications of perovskite films in the mid-IR region.

Highly Stable and Efficient Mn2+ Doping Zero-Dimension Cs2ZnxPb1-xCl4 Alloyed Nanorods toward White Electroluminescent Light-Emitting Diodes

Zero-dimensional (0D) crystal structure perovskite NCs have reemerged as promising materials owing to their superior long-term stability; however, their poor conductivity leads to the inferior electrical performances and critically restricts the optoelectronic application of 0D perovskite materials. Herien, the alloyed 0D crystal structure Cs₂Zn_xPb_1-xCl₄ nanorods (NRs) have been synthesized by the modified hot-injection method, which emits bright blue-violet light at 408 nm, and the optimized photoluminescence quantum yield (PLQY) reaches 26%. The Cs₂Zn_0.88Pb_0.12Cl₄ NRs display more excellent air stability and an order of magnitude higher conductivity than CsPbCl₃ nanocube films. In addition, we dope Mn²⁺ ions into the Cs₂Zn_0.88Pb_0.12Cl₄ NRs, which accomplished the optimized PLQY of 40.3% and polarized emission with r = 0.19. The light-emitting diodes (LEDs) based on Mn²⁺ ion doped Cs₂Zn_0.88Pb_0.12Cl₄ NRs exhibit a chromaticity coordinate (CIE) of (0.36, 0.33), an EQE of 0.3%, and a maximum luminance of 98 cd m^-2. This work has enriched ideas for the production of white light perovskite LEDs.

Modulated luminescence of zero-dimensional bimetallic all-inorganic halide clusters

A series of new zero-dimensional bimetallic all-inorganic halide clusters were reported, and the luminescence of the clusters was regulated by both the B(i) connecting ions and B(iii) ions in the octahedral centers.

Recent Advances in All-Inorganic Zero-Dimensional Metal Halides

All-inorganic zero-dimensional (0D) metal halides are composed of isolated metal halide polyhedrons bridged by monovalent alkali metal ions. The unique structure gives rise to molecule-like electronic configuration and consequently highly attractive optical properties. In comparison with their three-dimensional (3D) counterparts, the 0D metal halides exhibit characteristic features such as broadband emission and long-term stability. In addition, 0D metal halides can be constructed from a diverse range of metal ions and permit high-level impurity doping, thereby offering great structural designability and spectral tunability. This Review surveys recent advances in 0D metal halides, including crystal preparation, luminescence modulation, and emerging applications.

Resonant Degenerate Four-Wave Mixing at the Defect Energy Levels of 2D Organic-Inorganic Hybrid Perovskite Crystals

Two-dimensional organic-inorganic lead halide perovskites are generating great interest due to their optoelectronic characteristics such as high solar energy conversion efficiency and a tunable direct band gap in the visible regime. However, the presence of defect states within the two-dimensional crystal structure can affect these properties, resulting in changes to their band gap emission as well as the emergence of nonlinear optical phenomena. Here, we have investigated the effects of the presence of defect states on the nonlinear optical phenomena of the 2D hybrid perovskite (BA)₂(MA)₂Pb₃Br₁₀. When two pulses, one narrowband pump pulse centered at 800 nm and one supercontinuum pulse with bandwidth from 800-1100 nm, are incident on a perovskite flake, degenerate four-wave mixing (FWM) occurs, with peaks corresponding to the energy levels of the defect states present within the crystal. The longer carrier lifetime of the defect state, in comparison to that of virtual transitions that take place in nonresonant FWM processes, allows for a larger population of electrons to be excited by the second pump photon, resulting in increased FWM signal at the defect energy levels. The quenching of the two-photon luminescence as flake thickness increases is also observed and attributed to the increased presence of defects within the flake at larger thicknesses. This technique shows the potential of detecting defect energy levels in crystals using FWM for a variety of optoelectronic applications.

0D Perovskites: Unique Properties, Synthesis, and Their Applications

0D perovskites have gained much attention in recent years due to their fascinating properties derived from their peculiar structure with isolated metal halide octahedra or metal halide clusters. However, the systematic discussion on the crystal and electronic structure of 0D perovskites to further understand their photophysical characteristics and the comprehensive overview of 0D perovskites for their further applications are still lacking. In this review, the unique crystal and electronic structure of 0D perovskites and their diverse properties are comprehensively analyzed, including large bandgaps, high exciton binding energy, and largely Stokes-shifted broadband emissions from self-trapped excitons. Furthermore, the photoluminescence regulation are discussed. Then, the various synthetic methods for 0D perovskite single crystals, nanocrystals, and thin films are comprehensively summarized. Finally, the emerging applications of 0D perovskites to light-emitting diodes, solar cells, detectors, and some others are illustrated, and the outlook on future research in the field is also provided.

Fast Intrinsic Emission Quenching in Cs4PbBr6 Nanocrystals

Cs4PbBr6 (0D) nanocrystals at room temperature have both been reported as nonemissive and green-emissive systems in conflicting reports, with no consensus regarding both the origin of the green emission and the emission quenching mechanism. Here, via ab initio molecular dynamics (AIMD) simulations and temperature-dependent photoluminescence (PL) spectroscopy, we show that the PL in these 0D metal halides is thermally quenched well below 300 K via strong electron-phonon coupling. To unravel the source of green emission reported for bulk 0D systems, we further study two previously suggested candidate green emitters: (i) a Br vacancy, which we demonstrate to present a strong thermal emission quenching at room temperature; (ii) an impurity, based on octahedral connectivity, that succeeds in suppressing nonradiative quenching via a reduced electron-phonon coupling in the corner-shared lead bromide octahedral network. These findings contribute to unveiling the mechanism behind the temperature-dependent PL in lead halide materials of different dimensionality.

Revealing photoluminescence mechanisms of single CsPbBr3/Cs4PbBr6 core/shell perovskite nanocrystals

CsPbBr3 nanocrystals (NCs) encapsulated by Cs4PbBr6 has attracted extensive attention due to good stability and high photoluminescence (PL) emission efficiency. However, the origin of photoluminescence (PL) emission from CsPbBr3/Cs4PbBr6 composite materials has been controversial. In this work, we prepare CsPbBr3/Cs4PbBr6 core/shell nanoparticles and firstly study the mechanism of its photoluminescence (PL) at the single-particle level. Based on photoluminescence (PL) intensity trajectories and photon antibunching measurements, we have found that photoluminescence (PL) intensity trajectories of individual CsPbBr3/Cs4PbBr6 core/shell NCs vary from the uniform longer periods to multiple-step intensity behaviors with increasing excitation level. Meanwhile, second-order photon correlation functions exhibit single photon emission behaviors especially at lower excitation levels. However, the PL intensity trajectories of individual Cs4PbBr6 NCs demonstrate apparent "burst-like" behaviors with very high values of g 2(0) at any excitation power. Therefore, the distinguishable emission statistics help us to elucidate whether the photoluminescence (PL) emission of CsPbBr3/Cs4PbBr6 core/shell NCs stems from band-edge exciton recombination of CsPbBr3 NCs or intrinsic Br vacancy states of Cs4PbBr6 NCs. These findings provide key information about the origin of emission in CsPbBr3/Cs4PbBr6 core/shell nanoparticles, which improves their utilization in the further optoelectronic applications.

Low-Dimensional Metal Halide Perovskite Crystal Materials: Structure Strategies and Luminescence Applications

Replacing methylammonium (MA+ ), formamidine (FA+ ), and/or cesium (Cs+ ) in 3D metal halide perovskites by larger organic cations have built a series of low-dimensional metal halide perovskites (LDMHPs) in which the inorganic metal halide octahedra arranging in the forms of 2D layers, 1D chains, and 0D points. These LDMHPs exhibit significantly different optoelectronic properties from 3D metal halide perovskites (MHPs) due to their unique quantum confinement effects and large exciton binding energies. In particular, LDMHPs often have excellent broadband luminescence from self-trapped excitons. Chemical composition, hydrogen bonding, and external factors (temperature and pressure etc.) determine structures and influence photoelectric properties of LDMHPs greatly, and especially it seems that there is no definite regulation to predict the structure and photoelectric properties when a random cation, metal, and halide is chosen to design a LDMHP. Therefore, this review discusses the construction strategies of the recent reported LDMHPs and their application progress in the luminescence field for a better understanding of these factors and a prospect for LDMHPs' development in the future.

State of the Art and Prospects for Halide Perovskite Nanocrystals

Metal-halide perovskites have rapidly emerged as one of the most promising materials of the 21st century, with many exciting properties and great potential for a broad range of applications, from photovoltaics to optoelectronics and photocatalysis. The ease with which metal-halide perovskites can be synthesized in the form of brightly luminescent colloidal nanocrystals, as well as their tunable and intriguing optical and electronic properties, has attracted researchers from different disciplines of science and technology. In the last few years, there has been a significant progress in the shape-controlled synthesis of perovskite nanocrystals and understanding of their properties and applications. In this comprehensive review, researchers having expertise in different fields (chemistry, physics, and device engineering) of metal-halide perovskite nanocrystals have joined together to provide a state of the art overview and future prospects of metal-halide perovskite nanocrystal research.

On the Role of Cs4PbBr6 Phase in the Luminescence Performance of Bright CsPbBr3 Nanocrystals

CsPbBr3 nanocrystals have been identified as a highly promising material for various optoelectronic applications. However, they tend to coexist with Cs4PbBr6 phase when the reaction conditions are not controlled carefully. It is therefore imperative to understand how the presence of this phase affects the luminescence performance of CsPbBr3 nanocrystals. We synthesized a mixed CsPbBr3-Cs4PbBr6 sample, and compared its photo- and radioluminescence properties, including timing characteristics, to the performance of pure CsPbBr3 nanocrystals. The possibility of energy transfer between the two phases was also explored. We demonstrated that the presence of Cs4PbBr6 causes significant drop in radioluminescence intensity of CsPbBr3 nanocrystals, which can limit possible future applications of Cs4PbBr6-CsPbBr3 mixtures or composites as scintillation detectors.

Low-Dimensional-Networked Perovskites with A-Site-Cation Engineering for Optoelectronic Devices

Low-dimensional-networked (LDN) perovskites denote materials in which the molecular structure adopts 2D, 1D, or 0D arrangement. Compared to conventional 3D structured lead halide perovskite (chemical formula: ABX₃ where A: monovalent cations, B: divalent cations, X: halides) that have been studied widely as light absorber and used in current state-or-the-art solar cells, LDN perovskite have unique properties such as more flexible crystal structure, lower ion transport mobility, robust stability against environmental stress such as moisture, thermal, etc., making them attractive for applications in optoelectronic devices. Since 2014, reports on LDN perovskite materials used in perovskite solar cells, light emitting diodes (LEDs), luminescent solar concentrators (LSC), and photodetectors have been reported, aiming to overcome the obstacles of conventional 3DN perovskite materials in these optoelectronic devices. In this review, the variable ligands used to make LDN perovskite materials are summarized, their distinct properties compared to conventional 3D perovskite materials. The research progress of optoelectronic devices including solar cells, LEDs, LSCs, and photodetectors that used different LDNs perovskite, the roles and working mechanisms of the LDN perovskites in the devices are also demonstrated. Finally, key research challenges and outlook of LDN materials for various optoelectronic applications are discussed.

Defect Origin of Emission in CsCu2I3 and Pressure-Induced Anomalous Enhancement

Lead-free metal halide perovskites CsCu₂X₃ (X = Cl, Br, I) with a high photoluminescence quantum yield are promising materials for optoelectronic devices. However, the origin of photoluminescence (PL) emission is still under debate, and the anomalous dependence of PL on pressure is unclear. Here, we systemically study the effects of high pressure on the structural, electronic, and optical properties of CsCu₂I₃ using a diamond anvil cell (DAC) and first-principles calculations. We argue that the ground state structure of CsCu₂I₃ belongs to the pnma phase rather than the cmcm phase under ambient conditions. There is a structural phase transition from the pnma to the cmcm phase for CsCu₂I₃ at ∼5 GPa. The optical band gap derivative from absorption spectra increases from 3.57 to 3.62 eV within a pressure range of 0 to 4.03 GPa, and it then decreases over 4.03 GPa. There are two major PL emissions peaks at 2.11 and 2.32 eV, which are attributed to the intrinsic defect related trap states in CsCu₂I₃. Interestingly, there is an anomalous dependence of both PL emissions on pressure, such that PL peaks show a blueshift and the PL intensity is enhanced from 0 to ∼4 GPa, with redshifting and decreasing at pressures above ∼4 GPa. The anomalous evolution of the two PL emissions also suggests a defect origin of emissions.

Recent progress of zero-dimensional luminescent metal halides

This review provides in-depth insight into the structure–luminescence–application relationship of 0D all-inorganic/organic–inorganic hybrid metal halide luminescent materials.

Highly efficient radiative recombination in intrinsically zero-dimensional perovskite micro-crystals prepared by thermally-assisted solution-phase synthesis

Zero-dimensional (0D) quantum confinement can be achieved in perovskite materials by the confinement of electron and hole states to single PbX6 4- perovskite octahedra. In this work, 0D perovskite (Cs4PbBr6) micro-crystals were prepared by a simple thermally-assisted solution method and thoroughly characterized. The micro-crystals show a high level of crystallinity and a high photoluminescence quantum yield of 45%. The radiative recombination coefficient of the 0D perovskite micro-crystals, 1.5 × 10-8 s-1 cm3, is two orders of magnitude higher than that of typical three-dimensional perovskite and is likely a strong contributing factor to the high emission efficiency of 0D perovskite materials. Temperature dependent luminescence measurements provide insight into the role of thermally-activated trap states. Spatially resolved measurements on single 0D perovskite micro-crystals reveal uniform photoluminescence intensity and emission decay behaviour suggesting the solution-based fabrication method yields a high-quality and homogenous single-crystal material. Such uniform emission reflects the intrinsic 0D nature of the material, which may be beneficial to device applications.

Unveiling the Excited-State Dynamics of Mn2+ in 0D Cs4PbCl6 Perovskite Nanocrystals

Doping is an effective strategy for tailoring the optical properties of 0D Cs4PbX6 (X = Cl, Br, and I) perovskite nanocrystals (NCs) and expanding their applications. Herein, a unique approach is reported for the controlled synthesis of pure-phase Mn2+-doped Cs4PbCl6 perovskite NCs and the excited-state dynamics of Mn2+ is unveiled through temperature-dependent steady-state and transient photoluminescence (PL) spectroscopy. Because of the spatially confined 0D structure of Cs4PbCl6 perovskite, the NCs exhibit drastically different PL properties of Mn2+ in comparison with their 3D CsPbCl3 analogues, including significantly improved PL quantum yield in solid form (25.8%), unusually long PL lifetime (26.2 ms), large exciton binding energy, strong electron-phonon coupling strength, and an anomalous temperature evolution of Mn2+-PL decay from a dominant slow decay (in tens of ms scale) at 300 K to a fast decay (in 1 ms scale) at 10 K. These findings provide fundamental insights into the excited-state dynamics of Mn2+ in 0D Cs4PbCl6 NCs, thus laying a foundation for future design of 0D perovskite NCs through metal ion doping toward versatile applications.

Defect-Related Broadband Emission in Two-Dimensional Lead Bromide Perovskite Microsheets

Low-dimensional hybrid lead halide perovskites (LHPs) with broadband emission (BE) have been developed as promising candidates for single-source white-light-emitting diodes. However, the underlying origin of such BE is poorly understood. Herein, dual-emissive [NH₃(CH₂)₈NH₃]PbBr₄ perovskite microsheets (PMSs) with good dispersibility are successfully prepared. Besides the general narrowband emission (NE) originating from free excitons, BE (∼522 nm) is generated under a Br-poor condition, which is not observed in the single-crystal sample. Unlike self-trapped exciton emission, the BE observed in PMSs is experimentally determined to be related to bromide vacancies (V_Br), thereby exhibiting quasisaturation under high excitation intensity. Femtosecond transient absorption spectroscopy first shows that the trapping time of the photogenerated electrons by acceptor-like V_Br- is ∼15 ps, slower than that by surface defects (<1 ps). This study provides new insight into the underlying mechanism of BE and an effective approach to manipulating the optical properties of 2D perovskites.

Efficient Luminescence from CsPbBr3 Nanoparticles Embedded in Cs4PbBr6

Cs₄PbBr₆ is regarded as an outstanding luminescent material with good thermal stability and optical performance. However, the mechanism of green emission from Cs₄PbBr₆ has been controversial. Here we show that isolated CsPbBr₃ nanoparticles embedded within a Cs₄PbBr₆ matrix give rise to a "normal" green luminescence while superfluorescence at longer wavelengths is suppressed. High-resolution transmission electron microscopy shows that the embedded CsPbBr₃ nanoparticles are around 3.8 nm in diameter and are well-separated from each other, perhaps by a strain-driven mechanism. This mechanism may enable other efficient luminescent composites to be developed by embedding optically active nanoparticles epitaxially within inert host lattices.

Interface Matters: Enhanced Photoluminescence and Long-Term Stability of Zero-Dimensional Cesium Lead Bromide Nanocrystals via Gas-Phase Aluminum Oxide Encapsulation

Cesium lead halide perovskite nanocrystals (PNCs), while possessing facile chemical synthesis routes and high photoluminescence (PL) properties, are still challenged by issues of instability and degradation. Although atomic layer deposition (ALD) of metal oxides has been one of the common encapsulation approaches for longer term stability, its application inevitably resulted in severe loss of emission efficiency and at times partial loss of structural integrity of perovskites, creating a bottleneck in its practical viability. We demonstrate a nondestructive modified gas-phase technique with codeposition of both precursors trimethylaluminum and water to dramatically enhance the PL emission in zero-dimensional (0D) Cs₄PbBr₆ PNCs via alumina encapsulation. X-ray photoelectron spectroscopy analysis of Cs₄PbBr₆ films reveals the alumina deposition to be accompanied by elemental composition changes, particularly by the reduction of the excessive cesium content. Ab initio density functional theory simulations further unfold that the presence of excess Cs on the surface of PNCs leads to decomposition of structural [PbBr₆]^4- octahedra in the 0D perovskite lattice, which can be prevented in the presence of added hydroxyl groups. Our study thus unveils the pivotal role of the PNC surface composition and treatment in the process of its interaction with metal oxide precursors to control the PL properties as well as the stability of PNCs, providing an unprecedented way to use the conventional ALD technique for their successful integration into optoelectronic and photonic devices with improved properties.

Correlation of Photoluminescence and Structural Morphologies at the Individual Nanoparticle Level

Single-particle spectroscopy has demonstrated great potential for analyzing the microscopic behavior of various nanoparticles (NPs). However, high-resolution optical imaging of these materials at the nanoscale is still very challenging. Here, we present an experimental setup that combines high sensitivity of time-correlated single-photon counting (TCSPC) techniques with atomic force microscopy (AFM). This system enables single-photon detection with a time resolution of 120 ps and a spatial resolution of 5 nm. We utilize the setup to investigate the photoluminescence (PL) characteristics of both zero-dimensional (0D) and three-dimensional (3D) perovskite nanocrystals and establish a correlation between the particles’ sizes, their PL blinking, and the lifetime behavior. Our system demonstrates an unprecedented level of information, opening the door to understanding the morphology–luminescence correlation of various nanosystems.

Shining Emitter in a Stable Host: Design of Halide Perovskite Scintillators for X-ray Imaging from Commercial Concept

Halide perovskite (HP) nanocrystals (NCs) have recently shown great potential for X-ray detection and imaging. However, the practical application still has a long way to go with many technical requirements waiting to be fulfilled, including structure optimization, stability enhancement, and cost reduction. A design principle in this beginning stage is urgently needed but still lacking. Herein, with an "emitter-in-matrix" principle refined from commercial scintillators, CsPbBr₃@Cs₄PbBr₆ with emissive CsPbBr₃ NCs embedded inside a solid-state Cs₄PbBr₆ host is subjected to X-ray sensing and imaging. The Cs₄PbBr₆ matrix not only enhances the attenuation of X-rays but also dramatically improves the stability of CsPbBr₃ NCs. A favorable optical design with the Cs₄PbBr₆ matrix being transparent to the emission from CsPbBr₃ NCs enables efficient light output. As a result, stable and sensitive scintillation response to X-ray signals is demonstrated with superior linearity and ultrahigh time resolution. In order to show the huge potential for practical applications, X-ray imaging using a large-area film (360 mm × 240 mm) by the blade-coating technique is carried out to obtain a high-quality image of interior structures invisible to the human eye. In addition to the above advantages in optics, CsPbBr₃@Cs₄PbBr₆ also enjoys facile solution synthesis with large scalability, excellent repeatability, and low cost.

Stable green and red dual-color emission in all-inorganic halide-mixed perovskite single microsheets

Recently, all-inorganic perovskites have attracted tremendous attention due to their excellent optoelectronic properties and extensive potential applications. However, these perovskites usually show a single emission wavelength because of the high ionic migration. Herein, we synthesized all-inorganic halide-mixed perovskite CsPbBr x I3-x microsheets with high crystal quality using the anti-solvent solution method and observed extraordinary green and red dual-color emission in single CsPbBr x I3-x microsheets. Power dependent PL spectra reveal excitonic and defect related recombination features of CsPbBr3 and CsPbI3 for the green and red emission. Temperature dependent PL spectra indicated a distinctive exciton-phonon coupling strength in CsPbBr x I3-x microsheets compared with pure CsPbBr3 and CsPbI3. The PL dynamics showing longer emission lifetime further confirmed this conclusion. Our work not only provides a novel strategy to produce stable dual-color emission integration, but also promotes the fundamental insight into the emission dynamics and exciton/free carrier related photophysics in all-inorganic halide-mixed perovskites.

Antithermal Quenching of Luminescence in Zero-Dimensional Hybrid Metal Halide Solids

Zero-dimensional (0D) hybrid metal halides have emerged as a new generation of luminescent phosphors owing to their high radiative recombination rates, which, akin to their three-dimensional cousins, commonly demonstrate thermal quenching of luminescence. Here, we report on the finding of antithermal quenching of luminescence in 0D hybrid metal halides. Using (C₉NH₂₀)₂SnBr₄ single crystals as an example system, we show that 0D metal halides can demonstrate antithermal quenching of luminescence. A combination of experimental characterizations and first-principles calculations suggests that antithermal quenching of luminescence is associated with trap states introduced by structural defects in (C₉NH₂₀)₂SnBr₄. Importantly, we find that antithermal quenching of luminescence is not only limited to (C₉NH₂₀)₂SnBr₄ but also exists in other 0D metal halides. Our work highlights the important role of defects in impacting photophysical properties of hybrid metal halides and may stimulate new efforts to explore metal halides exhibiting antithermal quenching of luminescence at higher temperatures.

Laser-Assisted Fabrication for Metal Halide Perovskite-2D Nanoconjugates: Control on the Nanocrystal Density and Morphology

We report on a facile and rapid photo-induced process to conjugate graphene-based materials with metal-halide perovskite nanocrystals. We show that a small number of laser pulses is sufficient to decorate the 2-dimensional (2D) flakes with metal-halide nanocrystals without affecting their primary morphology. At the same time, the density of anchored nanocrystals could be finely tuned by the number of irradiation pulses. This facile and rapid room temperature method provides unique opportunities for the design and development of perovskite-2D nanoconjugates, exhibiting synergetic functionality by combining nanocrystals of different morphologies and chemical phases with various 2D materials.

A CTAB-mediated antisolvent vapor route to shale-like Cs4PbBr6 microplates showing an eminent photoluminescence

Compared with nanoscale quantum dots (QDs), the large-sized perovskite crystals not only possess better stability but also are convenient for application exploration. Herein, we develop a facile and efficient antisolvent vapor-assisted recrystallization approach for the synthesis of large-sized Cs4PbBr6 perovskite crystal microplates. In this method, for the first time, the shale-like Cs4PbBr6 microplates with lateral dimensions of hundreds of microns are fabricated by employing cetyltriethylammnonium bromide (CTAB) as a morphology-directing agent. FESEM, TEM, and AFM characterizations indicate that the as-obtained shale-like Cs4PbBr6 microplates are actually formed by 6-8 nm thick Cs4PbBr6 nanosheets with orientational stacking. Importantly, such highly crystalline Cs4PbBr6 microplates with shale-like morphology exhibit a narrow and intense green PL emission with a 59% PL quantum yield. Moreover, the planar structure of shale-like Cs4PbBr6 microplates makes it easy to form a preferred orientation on a substrate, which endow them with promising potential in optoelectronic devices such as lighting and displays.

Hydraulic shear-induced rapid mass production of CsPbBr3/Cs4PbBr6 perovskite composites

Pure green CsPbBr₃/Cs₄PbBr₆ perovskite composites were synthesized by generating hydraulic shear as a rapid mass synthesis strategy.

Highly stable hetero-structured green-emitting cesium lead bromide nanocrystals via ligand-mediated phase control

Green-emissive Cs₄PbBr₆ shows promise for light-emitting diode devices superior to that of CsPbBr₃ NCs owing to their stability and high photoluminescence efficiency. Nevertheless, there is still no consensus regarding the basis of their green emission, which decelerates their advance in light-emitting applications. Herein, a systematic investigation on the concentration of capping ligands (oleylamine and oleic acid), which determines the predominant phase between CsPbBr₃ and Cs₄PbBr₆ for a given Cs to Pb feed ratio, is conducted. This study deduces that oleylamine to oleic acid ratio plays a crucial role in obtaining either green-emissive or non-emissive Cs₄PbBr₆ NCs. Scrutiny of Cs₄PbBr₆ microscopic and optical data in addition to their emission quenching study with a hole-withdrawing molecule reveals that the green emission originates from the CsPbBr₃ impurity phase. Furthermore, stable green emission is observed for CsPbBr₃/Cs₄PbBr₆ nanocrystals when CsPbBr₃ particles are well protected by the Cs₄PbBr₆ matrix. These CsPbBr₃/Cs₄PbBr₆ films remained highly luminescent even after UV exposure for hours or annealing at ∼150 °C for days in addition to their long-term stability under an ambient atmosphere, which are the desirable properties for various practical applications.

Disentangling the Luminescent Mechanism of Cs4PbBr6 Single Crystals from an Ultrafast Dynamics Perspective

New all-inorganic perovskites like Cs₄PbBr₆ provide rich luminescent tools and particularly novel physical insights, including their zero-dimensional structure and controversial emitting mechanism. The ensuing debate over the origin of the luminescence of Cs₄PbBr₆ inspired us to tackle the issue through fabricating high-quality Cs₄PbBr₆ single crystals and employing ultrafast dynamics study. Upon photoexcitation, Cs₄PbBr₆ underwent dynamics steps distinct from that of CsPbBr₃, including exciton migration to the defect level on a time scale of several hundred femtoseconds, exciton relaxation within the defect states on the picosecond time scale, and exciton recombination from the subnanosecond to nanosecond time scale. The observation disclosed that crystal defects of Cs₄PbBr₆ induced green emission while CsPbBr₃ mainly relied on quantum confinement to emit at room temperature. The study provides an in-depth understanding of the photoinduced multistep dynamics steps of Cs₄PbBr₆ associated with display and photovoltaic applications, establishing Cs₄PbBr₆ as a new candidate for uses associated with the perovskite family of materials.

Mixed-Solvent Polarity-Assisted Phase Transition of Cesium Lead Halide Perovskite Nanocrystals with Improved Stability at Room Temperature

Cesium lead halide perovskite nanocrystals (NCs) have attracted enormous interest in light-emitting diode, photodetector and low-threshold lasing application in terms of their unique optical and electrical performance. However, little attention has been paid to other structures associated with CsPbBr₃, such as CsPb₂Br₅. Herein, we realize a facile method to prepare dual-phase NCs with improved stability against polar solvents by replacing conventional oleylamine with cetyltrimethyl ammonium bromide (CTAB) in the reprecipitation process. The growth of NCs can be regulated with different ratios of toluene and ethanol depending on solvent polarity, which not only obtains NCs with different sizes and morphologies, but also controls phase transition between orthorhombic CsPbBr₃ and tetragonal CsPb₂Br₅. The photoluminescence (PL) and defect density calculated exhibit considerable solvent polarity dependence, which is ascribed to solvent polarity affecting the ability of CTAB to passivate surface defects and improve stoichiometry in the system. This new synthetic method of perovskite material will be helpful for further studies in the field of lighting and detectors.

Extrinsic photoluminescence properties of individual micro-particle of Cs4PbBr6 perovskite with "defect" structure

Optical performance of the lead halide perovskites with zero-dimension (0D) structure has been in a hot debate for optoelectronic applications. Here, Cs₄PbBr₆ hexagonal micro-particles with a remarkable green emission are first fabricated via a low-temperature solution-process employed ethanol as solvent. Our results underline that the existence of bromine vacancies and the introduction of hydroxyl induce a narrowed band gap with the formation of a defect level, which contributes to the extrinsic photoluminescence (PL) properties synergistically. Thanks to the high exciton binding energy and the unique morphology with a regular geometric structure of the as-obtained micro-particles, two-photon pumped amplified spontaneous emission (ASE) and single mode lasing from an individual Cs₄PbBr₆ particle are realized. Our results not only provide an insight into the origin of optical emission from Cs₄PbBr₆, but also demonstrate that the versatile Cs₄PbBr₆ offers a new opportunity for novel nonlinear photonics applications as an up-conversion laser.