Intrinsically Stretchable n-Type Polymer Semiconductors through Side Chain Engineering

Pechmann Dye-Containing Diketopyrrolopyrrole-Based Stretchable Polymer Semiconductors

Conjugated polymer design via random terpolymerization with irregular backbones has emerged as a strategy for stretchable organic electronics, requiring diverse molecular architectures to balance charge carrier mobility (μ) and stretchability. In this study, diketopyrrolopyrrole (DPP)-based conjugated polymers with 0%, 5%, and 10% Pechmann dye (PDy) units, denoted as DP-T0, DP-T5, and DP-T10, respectively, are introduced, and explore the impact of PDy on structural mobility and stretchability through experimental and computational analyses. Electrical measurements reveal hole mobilities ranging from 0.01 to 0.08 cm2 V⁻¹ s⁻¹, with a slight decrease as PDy content increases. Stretchability tests indicate significant improvements in DP-T5 and DP-T10 due to their loosely packed lamellar structures. Notably, DP-T5 achieves a crack onset strain (εc) of 250% and a polarization dichroic ratio (PDR) of 2.4 under 200% strain, leading to a mobility ratio (μ200/μ0) exceeding 5. These results demonstrate that PDy incorporation enhances the mechanical stretchability of DPP-based conjugated polymers while maintaining reasonable electronic performance. This work highlights the potential of PDy-based random terpolymerization for developing stretchable polymer semiconductors.

Recent developments in polymer semiconductors with excellent electron transport performances

Benefiting from molecular design and device innovation, electronic devices based on polymer semiconductors have achieved significant developments and gradual commercialization over the past few decades. Most of high-performance polymer semiconductors that have been prepared exhibit p-type performances, and records of their carrier mobilities are constantly being broken through. Although ambipolar and n-type polymers are necessary for constructing p-n heterojunctions and logic circuits, only a few materials show outstanding device performances, which leads to their developments lagging far behind that of p-type analogues. As a consequence, it is extremely significant to summarize polymer semiconductors with excellent electron transport performances. This review focuses on the design considerations and bonding modes between monomers of polymer semiconductors with high electron mobilities. To enhance electron transport performances of polymer semiconductors, the structural modification strategies are described in detail. Subsequently, the electron transport, thermoelectric, mixed ionic-electronic conduction, intrinsically stretchable, photodetection, and spin transport performances of high-electron mobility polymers are discussed from the perspective of molecular engineering. In the end, the challenges and prospects in this research field are presented, which provide valuable guidance for the design of polymer semiconductors with excellent electron transport performances and the exploration of more advanced applications in the future.

Improved Mobility-Stretchability Properties of Diketopyrrolopyrrole-Based Conjugated Polymers with Diastereomeric Conjugation Break Spacers

Stretchable conjugated polymers with conjugation break spacers (CBSs) synthesized via random terpolymerization have gained considerable attention because of their efficacy in modulating mobility and stretchability. This study incorporates a series of dianhydrohexitol diastereomers of isosorbide (ISB) and isomannide (IMN) units into the diketopyrrolopyrrole-based backbone as CBSs. It is found that the distorted CBS (IMN) improves the mobility-stretchability properties of the polymer with a highly coplanar backbone, whereas the extended CBS (ISB) enhances those of the polymer with a noncoplanar backbone. Additionally, the different configurations of ISB and IMN sufficiently affect the solid-state packing, aggregation capabilities, crystallographic parameters, and mobility-stretchability properties of the polymer. The IMN-based polymers exhibit the highest mobility of 1.69 cm2 V-1 s-1 and crystallinity retentions of (85.7, 78.6)% under 20% and 60% strains, outperforming their ISB-based or unmodified counterparts. The improvement is correlated with a robust aggregation capability. Furthermore, the CBS content affects aggregation behavior, notably affecting mobility. This result indicates that incorporating CBSs into the polymer can enhance backbone flexibility via movement and rotation of the CBS without affecting the crystalline regions.

Elastic-Plastic Fully π-Conjugated Polymer with Excellent Energy Dissipation Capacity for Ultra-Deep-Blue Flexible Polymer Light-Emitting Diodes with CIEy = 0.04

Emerging intrinsically flexible fully π-conjugated polymers (FπCPs) are a promising functional material for flexible optoelectronics, attributed to their potential interchain interpenetration and entanglement. However, the challenge remains in obtaining elastic-plastic FπCPs with intrinsic robust optoelectronic property and excellent long-term and cycling deformation stability simultaneously for applications in deep-blue flexible polymer light-emitting diodes (PLEDs). This study, demonstrates a series of elastic-plastic FπCPs (P1-P4) with an excellent energy dissipation capacity via side-chain internal plasticization for the ultra-deep-blue flexible PLEDs. First, the freestanding P1 film exhibited a maximum fracture strain of 34.6%. More interestingly, the elastic behavior is observed with a low strain (≤10%), and the stretched film with a high deformation (>10%) attributed to plastic processing revealed the robust capacity to realize energy absorption and release. The elastic-plastic P1 film exhibits outstanding ultra-deep-blue emission, with an efficiency of 56.38%. Subsequently, efficient PLEDs are fabricated with an ultra-deep-blue emission of CIE (0.16, 0.04) and a maximum external quantum efficiency of 1.73%. Finally, stable and efficient ultra-deep-blue electroluminescence are obtained from PLEDs based on stretchable films with different strains and cycling deformations, suggesting excellent elastic-plastic behavior and deformation stability for flexible electronics.

Highly Sensitive, Low-Energy-Consumption Biomimetic Olfactory Synaptic Transistors Based on the Aggregation of the Semiconductor Films

Artificial olfactory synaptic devices with low energy consumption and low detection limits are important for the further development of neuromorphic computing and intelligent robotics. In this work, an ultralow energy consumption and low detection limit imitation olfactory synaptic device based on organic field-effect transistors (OFETs) was prepared. The aggregation state of poly(diketopyrrolopyrrole-selenophene) (PTDPP) semiconductor films is modulated by adding unfavorable solvents and annealing treatments to obtain excellent charge transfer and gas synaptic properties. The regulated OFET device can execute basic biological synaptic functions, including excitatory postsynaptic currents (EPSCs), paired-pulse facilitation (PPF), and the transition from short-term to long-term plasticity, at an ultralow operating voltage of -0.0005 V. The ultralow energy consumption during the biomimetic simulation is in the range of 8.94-88 fJ per spike. Noteworthily, the gas detection limit of the device is as low as 50 ppb, well below normal human NO2 gas perception limits (100-1000 ppb). Additionally, high-pass filtering, Pavlovian conditioned reflexes, and decoding of "Morse code" were simulated. Finally, a grid-free conformal device with outstanding flexibility and stability was fabricated. In conclusion, the control of semiconductor thin-film aggregation provides effective guidance for preparing low-energy-consumption, highly sensitive olfactory nerve-mimicking devices and promoting the development of wearable electronics.

Carboxylating Elastomer via Thiol-Ene Click Reaction to Improve Miscibility with Conjugated Polymers for Mechanically Robust Organic Solar Cells with Efficiency of 19

Incorporating flexible insulating polymers is a straightforward strategy to enhance the mechanical properties of rigid conjugated polymers, enabling their use in flexible electronic devices. However, maintaining electronic characteristics simultaneously is challenging due to the poor miscibility between insulating polymers and conjugated polymers. This study introduces the carboxylation of insulating polymers as an effective strategy to enhance miscibility with conjugated polymers via surface energy modulation and hydrogen bonding. The carboxylated elastomer, synthesized via a thiol-ene click reaction, closely matches the surface energy of the conjugated polymer. This significantly improves the mechanical properties, achieving a high crack-onset strain of 21.48%, surpassing that (5.93%) of the unmodified elastomer:conjugated polymer blend. Upon incorporating the carboxylated elastomer into PM6:L8-BO-based organic solar cells, an impressive power conversion efficiency of 19.04% is attained, which top-performs among insulating polymer-incorporated devices and outperforms devices with unmodified elastomer or neat PM6:L8-BO. The superior efficiency is attributed to the optimized microstructures and enhanced crystallinity for efficient and balanced charge transport, and suppressed charge recombination. Furthermore, flexible devices with 5% carboxylated elastomer exhibit superior mechanical stability, retaining ≈88.9% of the initial efficiency after 40 000 bending cycles at a 1 mm radius, surpassing ≈83.5% for devices with 5% unmodified elastomer.

Microstructural Evolution of P(NDI2OD-T2) Films with Different Molecular Weight during Stretching Deformation

Conjugated polymers exhibit excellent electrical and mechanical properties when their molecular weight (Mw) is above the critical molecular weight (Mc). The microstructural changes of polymers under strain are crucial to establish a structure-performance relationship. Herein, the tensile deformation of P(NDI2OD-T2) is visualized, and cracks are revealed either along the (100) crystal plane of side chain packing or along the main chain direction which depends on the Mw is below or above the Mc. When Mw < Mc, the film cracks along the (100) plane under small strains. When Mw > Mc, the polymer chains first undergo stretch-induced orientation and then fracture along the main chain direction at large strains. This is attributed to the fact that the low Mw film exhibits large crystalline domains and the absence of interdomain connectivity, which are vulnerable to mechanical stress. In contrast, the high Mw film displays a nearly amorphous morphology with adequate entanglements, the molecular chains can endure stresses in the stretching direction to release substantial strain energy under greater mechanical deformation. Therefore, the film with Mw > Mc exhibits the optimal electrical and mechanical performances simultaneously, i.e., the electron mobility is retained under 100% strain and after 100 stretching-releasing cycles.

Intrinsically Stretchable and Healable Polymer Semiconductors

In recent decades, polymer semiconductors, extensively employed as charge transport layers in devices like organic field-effect transistors (OFETs), have undergone thorough investigation due to their capacity for large-area solution processing, making them promising for mass production. Research efforts have been twofold: enhancing the charge mobilities of polymer semiconductors and augmenting their mechanical properties to meet the demands of flexible devices. Significant progress has been made in both realms, propelling the practical application of polymer semiconductors in flexible electronics. However, integrating excellent semiconducting and mechanical properties into a single polymer still remains a significant challenge. This review intends to introduce the design strategies and discuss the properties of high-charge mobility stretchable conjugated polymers. In addition, another key challenge faced in this cutting-edge field is maintaining stable semiconducting performance during long-term mechanical deformations. Therefore, this review also discusses the development of healable polymer semiconductors as a promising avenue to improve the lifetime of stretchable device. In conclusion, challenges and outline future research perspectives in this interdisciplinary field are highlighted.

Investigating the Mobility-Compressibility Properties of Conjugated Polymers by the Contact Film Transfer Method with Prestrain

Up to now, researches on the mobility-stretchability of semiconducting polymers are extensively investigated, but little attention was  paid to their morphology and field-effect transistor characteristics under compressive strains, which is equally crucial in wearable electronic applications. In this work, a contact film transfer method is applied to evaluate the mobility-compressibility properties of conjugated polymers. A series of isoindigo-bithiophene conjugated polymers with symmetric carbosilane side chains (P(SiSi)), siloxane-terminated alkyl side chains (P(SiOSiO)), and combined asymmetric side chains (P(SiOSi)) are investigated. Accordingly, a compressed elastomer slab is used to transfer and compress the polymer films by releasing prestrain, and the morphology and mobility evolutions of these polymers are tracked. It is found that P(SiOSi) outperforms the other symmetric polymers including P(Si─Si) and P(SiO─SiO), having the ability to dissipate strain with its shortened lamellar spacing and orthogonal chain alignment. Notably, the mechanical durability of P(SiOSi) is also enhanced after consecutive compress-release cycles. In addition, the contact film transfer technique is demonstrated to be applicable to investigate the compressibility of different semiconducting polymers. These results demonstrate a comprehensive approach to understand the mobility-compressibility properties of semiconducting polymers under tensile and compressive strains.

Highly Strain-Stable Intrinsically Stretchable Olfactory Sensors for Imperceptible Health Monitoring

Intrinsically stretchable gas sensors possess outstanding advantages in seamless conformability and high-comfort wearability for real-time detection toward skin/respiration gases, making them promising candidates for health monitoring and non-invasive disease diagnosis and therapy. However, the strain-induced deformation of the sensitive semiconductor layers possibly causes the sensing signal drift, resulting in failure in achievement of the reliable gas detection. Herein, a surprising result that the stretchable organic polymers present a universal strain-insensitive gas sensing property is shown. All the stretchable polymers with different degrees of crystallinity, including indacenodithiophene-benzothiadiazole (PIDTBT), diketo-pyrrolo-pyrrole bithiophene thienothiophene (DPPT-TT) and poly[4-(4,4-dihexadecyl-4H-cyclopenta[1,2-b:5,4-b']dithiophen-2-yl)-alt-[1,2,5]thiad-iazolo [3,4-c] pyridine] (PCDTPT), show almost unchanged gas response signals in the different stretching states. This outstanding advantage enables the intrinsically stretchable devices to imperceptibly adhere on human skin and well conform to the versatile deformations such as bending, twisting, and stretching, with the highly strain-stable gas sensing property. The intrinsically stretchable PIDTBT sensor also demonstrates the excellent selectivity toward the skin-emitted trimethylamine (TMA) gas, with a theoretical limit of detection as low as 0.3 ppb. The work provides new insights into the preparation of the reliable skin-like gas sensors and highlights the potential applications in the real-time detection of skin gas and respiration gas for non-invasive medical treatment and disease diagnosis.

Achieving High Performance Stretchable Conjugated Polymers via Donor Structure Engineering

A backbone engineering strategy is developed to tune the mechanical and electrical properties of conjugated polymer semiconductors. Four Donor-Acceptor (D-A) polymers, named PTDPPSe, PTDPPTT, PTDPPBT, and PTDPPTVT, are synthesized using selenophene (Se), thienothiophene (TT), bithiophene (BT), and thienylenevinylenethiophene (TVT) as the donors and siloxane side chain modified diketopyrrolopyrrole (DPP) as acceptor. The influences of the donor structure on the polymer energy level, film morphology, molecular stacking, carrier transport properties, and tensile properties are all examined. The films of PTDPPSe show the best stretchability with crack-onset-strain greater than 100%, but the worst electrical properties with a mobility of only 0.54 cm2  V-1  s-1 . The replacement of the Se donor with larger conjugated donors, that is, TT, BT, and TVT, significantly improves the mobility of conjugated polymers but also leads to reduced stretchability. Remarkably, PTDPPBT exhibits moderate stretchability with crack-onset-strain ≈50% and excellent electrical properties. At 50% strain, it has a mobility of 2.37 cm2 V-1  s-1 parallel to the stretched direction, which is higher than the mobility of most stretchable conjugated polymers in this stretching state.

Material Design and Device Fabrication Strategies for Stretchable Organic Solar Cells

Recent advances in the power conversion efficiency (PCE) of organic solar cells (OSCs) have greatly enhanced their commercial viability. Considering the technical standards (e.g., mechanical robustness) required for wearable electronics, which are promising application platforms for OSCs, the development of fully stretchable OSCs (f-SOSCs) should be accelerated. Here, a comprehensive overview of f-SOSCs, which are aimed to reliably operate under various forms of mechanical stress, including bending and multidirectional stretching, is provided. First, the mechanical requirements of f-SOSCs, in terms of tensile and cohesion/adhesion properties, are summarized along with the experimental methods to evaluate those properties. Second, essential studies to make each layer of f-SOSCs stretchable and efficient are discussed, emphasizing strategies to simultaneously enhance the photovoltaic and mechanical properties of the active layer, ranging from material design to fabrication control. Key improvements to the other components/layers (i.e., substrate, electrodes, and interlayers) are also covered. Lastly, considering that f-SOSC research is in its infancy, the current challenges and future prospects are explored.

Role of Molecular Weight in the Mechanical Properties and Charge Transport of Conjugated Polymers Containing Siloxane Side Chains

The molecular weight is a key factor affecting the properties of conjugated polymers. To determine the critical molecular weights of conjugated polymers modified with siloxane side chains, poly-diketo-pyrrolopyrrole-selenophene (PTDPPSe-5Si) samples with molecular weights ranging from 20 to 350 kDa are synthesized. The critical molecular weight of the polymer is determined in the range of 60-100 kDa by testing the viscosity of the solution. When the molecular weight of the 27-60 kDa polymers is below the critical molecular weight, they exhibit a high crystallinity and low ductility. When the molecular weight of the 100 kDa polymer reaches the critical molecular weight, the crystallinity decreases, and the ductility increases. As the molecular weight increases, the polymer film also gradually changes from brittle to ductile. Furthermore, when the molecular weight of the 315 kDa polymer is much higher than the critical molecular weight, the film exhibits a significant ductility, which results in the polymer films showing no pronounced cracks after high-percentage stretching. Additionally, due to the oriented alignment of the molecular chains caused by stretching, the carrier mobility in the parallel direction becomes 2.14-fold of the initial film.

Functionalization of Biphenylcarbazole (CBP) with Siloxane-Hybrid Chains for Solvent-Free Liquid Materials

We report herein the synthesis of siloxane-functionalized CBP molecules (4,4′-bis(carbazole)-1,1′-biphenyl) for liquid optoelectronic applications. The room-temperature liquid state is obtained through a convenient functionalization of the molecules with heptamethyltrisiloxane chains via hydrosilylation of alkenyl spacers. The synthesis comprises screening of metal-catalyzed methodologies to introduce alkenyl linkers into carbazoles (Stille and Suzuki Miyaura cross-couplings), incorporate the alkenylcarbazoles to dihalobiphenyls (Ullmann coupling), and finally introduce the siloxane chains. The used conditions allowed the synthesis of the target compounds, despite the high reactivity of the alkenyl moieties bound to π-conjugated systems toward undesired side reactions such as polymerization, isomerization, and hydrogenation. The features of these solvent-free liquid CBP derivatives make them potentially interesting for fluidic optoelectronic applications.