Self-assembly of Janus Dumbbell Nanocrystals and Their Enhanced Surface Plasmon Resonance

A novel dilution strategy for tuning Janus particle morphology

Morphology plays a critical role in determining the properties of colloidal particles. To better understand the morphological evolution of Janus particles formed via seeded emulsion polymerization, we constructed a phase diagram based on the seed-to-monomer ratio and cross-linking density. We found that systematically diluting swollen seed particles before polymerization induces distinct morphological transitions. Quantitative analysis of monomer uptake in seed particles revealed that these transitions are primarily driven by monomer diffusion during dilution. Computational simulations supported our experimental findings, demonstrating a sphere-to-dumbbell transition as seed cross-linking density increased. Simulations also captured changes in the interfacial curvature between the seed and monomer lobes, which were further validated through particle etching experiments. Using this new dilution strategy, we successfully synthesized amphiphilic Janus particles with fluorinated monomers. When combined with homogeneous binder particles, these Janus particles formed stratified coatings that significantly improved water resistance. Notably, the water contact angle remained stable even after repeated solvent rinsing and mechanical abrasion. This dilution approach provides a simple yet effective method for controlling Janus particle morphology and optimizing their functional properties.

Pushing the Frontiers: Artificial Intelligence (AI)-Guided Programmable Concepts in Binary Self-Assembly of Colloidal Nanoparticles

Colloidal nanoparticle self-assembly is a key area in nanomaterials science, renowned for its ability to design metamaterials with tailored functionalities through a bottom-up approach. Over the past three decades, advancements in nanoparticle synthesis and assembly control methods have propelled the transition from single-component to binary assemblies. While binary assembly has been recognized as a significant concept in materials design, its potential for intelligent and customized assembly has often been overlooked. It is argued that the future trend in the assembly of binary nanocrystalline superlattices (BNLSs) can be analogous to the '0s' and '1s' in computer programming, and customizing their assembly through precise control of these basic units could significantly expand their application scope. This review briefly recaps the developmental trajectory of nanoparticle assembly, tracing its evolution from simple single-component assemblies to complex binary co-assemblies and the unique property changes they induce. Of particular significance, this review explores the future prospects of binary co-assembly, viewed through the lens of 'AI-guided programmable assembly'. Such an approach has the potential to shift the paradigm from passive assembly to active, intelligent design, leading to the creation of new materials with disruptive properties and functionalities and driving profound changes across multiple high-tech fields.

Beyond Surfactants: Janus Particles for Functional Interfaces and Coatings

Janus particles (JPs), initially introduced as soft matter, have evolved into a distinctive class of materials that set them apart from traditional surfactants, dispersants, and block copolymers. This mini-review examines the similarities and differences between JPs and their molecular counterparts to elucidate the unique properties of JPs. Key studies on the assembly behavior of JPs in bulk phases and at interfaces are reviewed, highlighting their unique ability to form diverse, complex structures. The superior interfacial stability and tunable amphiphilicity of JPs make them highly effective emulsifiers and dispersants, particularly in emulsion polymerization systems. Beyond these applications, JPs demonstrate immense potential as coating materials, facilitating the development of eco-friendly, anti-icing, and antifouling coatings. A comparative discussion with zwitterionic polymers also highlights the distinctive advantages of each system. This review emphasizes that while JPs mimic some of the behaviors of small molecular surfactants, they also open doors to entirely new applications, making them indispensable as next-generation functional materials.

Two sides of the coin: synthesis and applications of Janus particles

Named after the two-faced Roman god, Janus particles (JPs) are defined by their distinct dual chemical compositions on a single particle. Research on micron-sized JPs has yielded remarkable insights, showcasing their unique assembly behaviors both in bulk and at interfaces. However, significant challenges persist, particularly in the synthesis of smaller (<500 nm) JPs, which remains complex and difficult to scale up. To date, there has been no commercial success with JPs. Recently, seeded synthesis methods, such as emulsion polymerization that is already employed in industrial-scale manufacturing, have shown great promise. These methods enable the production of high-quality JPs with different sizes, morphologies, and functionalities. This advancement has inspired more efforts in exploring JP applications across various fields, including emulsion stabilization, drug delivery, electronic devices, and coatings. This review provides a comprehensive overview of the recent progress in the synthesis and application of polymeric JPs, with an emphasis on the seeded synthesis approach. It discusses the underlying reaction mechanisms and explores different strategies for controlling JP morphology. Serving as a roadmap, this review aims to guide the design of novel functional JPs and their potential future applications. The successful implementation of JPs will require careful consideration and a deep understanding of both synthesis and applications, as these are indeed two sides of the same coin.

Equilibrium and self-assembly of Janus particles at liquid-liquid interfaces for the film formation

This article investigates the equilibrium arrangement, self-assembly process, and subsequent curing of amphiphilic snowman-shaped Janus particles at the oil-water interface. The independent Janus particles are in vertical equilibrium state and the contact position of the oil-water interface is at the largest cross section of the particle's hydrophobic phase. Under the effect of the surface tension and the adsorption of materials, Janus particles may form particle combinations including the particle pairs and the particle triangle, whose inner and outer sides have the liquid surface exhibiting completely opposite contact angles. Particle combinations form stable parallel double-chain structures with diverse shapes after the self-assembly process. However, the single Janus particles attain a state of mechanical equilibrium under the influence of surrounding particles, enabling them to assemble into regular array structures. The relationship of interfacial tension coefficient between phases can be changed by adjusting the oil-water system, which leads to variations in the self-assembly speed and the final arrangement results. The thin-film with uniformly distributed vertical particles is achieved by replacing the underlying deionized water with a curing agent. Based on the understanding of the interactions between irregularly shaped Janus particles at the oil-water interface, it will be convenient to achieve the controllable self-assembly and widely applications of these particles.

Nanocrystal Assemblies: Current Advances and Open Problems

We explore the potential of nanocrystals (a term used equivalently to nanoparticles) as building blocks for nanomaterials, and the current advances and open challenges for fundamental science developments and applications. Nanocrystal assemblies are inherently multiscale, and the generation of revolutionary material properties requires a precise understanding of the relationship between structure and function, the former being determined by classical effects and the latter often by quantum effects. With an emphasis on theory and computation, we discuss challenges that hamper current assembly strategies and to what extent nanocrystal assemblies represent thermodynamic equilibrium or kinetically trapped metastable states. We also examine dynamic effects and optimization of assembly protocols. Finally, we discuss promising material functions and examples of their realization with nanocrystal assemblies.

Amphiphilic titania Janus nanoparticles containing ionic groups prepared in oil-water Pickering emulsion

Titania nanoparticles with a diameter of 8 nm underwent an anisotropic modification using apolar 6-bromohexylphosphonic acid and cationic polar N,N,N-trimethyl-6-phosphonohexan-1-aminium bromide. The Janus modification was achieved through a straightforward one-step Pickering emulsion approach using toluene-water mixtures. The resulting Janus particles were compared with isotropically and statistically modified titania particles, where either a single coupling agent is attached to the surface or both coupling agents are assembled over the surface randomly, respectively. The covalent binding of the phosphonic acids to the titania surface was confirmed by FTIR and 31P solid-state CP-MAS NMR analyses. The grafting density was assessed using TGA, elemental analysis, and ICP-MS, revealing grafting densities of 0.1 mmol g-1 to 0.5 mmol g-1 for the cationic coupling agent and 1.2 mmol g-1 to 1.5 mmol g-1 for the apolar coupling agent, respectively. ζ-Potential titration measurements of both pristine and modified particles revealed isoelectric points at pH 4.5 to 9.3, depending on the type of modification. The ability of the particles to stabilize Pickering emulsions was tested under various conditions, with statistically and Janus-modified particles demonstrating a significant increase in stabilization compared to their isotropically modified counterparts. Furthermore, Janus particles were deposited onto glass substrates by a simple layer-by-layer approach. Through the self-assembly of these Janus particles, the glass substrate's properties could be tailored from hydrophilic to hydrophobic to hydrophilic, depending on the dipping cycle.

Magnetite-based Janus nanoparticles, their synthesis and biomedical applications

The advent of Janus nanoparticles has been a great breakthrough in the emerging field of nanomaterials. Janus nanoparticles refer to a single structure with two distinct chemical functions on either side. Owing to their asymmetric structures, they can be utilized in a variety of applications where monomorphic particles are insufficient. In the last decade, a wide variety of materials have been employed to fabricate Janus nanoparticles, and due to the great advantages of magnetite (Iron-oxide) NPs, they have been considered as one of the best candidates. With the main benefit of magnetic controlling, magnetite Janus nanoparticles fulfill great promises, especially in biomedical areas such as bioimaging, cancer therapies, theranostics, and biosensing. The intrinsic characteristics of magnetite Janus nanoparticles (MJNPs) even hold great potential in magnetite Janus forms of micro-/nanomotors. Despite the great interest and potential in magnetic Janus NPs, the need for a comprehensive review on MJNPs with a concentration on magnetite NPs has been overlooked. Herein, we present recent advancements in the magnetite-based Janus nanoparticles in the flourishing field of biomedicine. First, the synthesis and fabrication methods of Janus nanoparticles are discussed. Then we will delve into their intriguing biomedical applications, with a separate section for magnetite Janus micro-/nanomotors in biomedicine. And finally, the challenges and future outlook are provided. This article is categorized under: Therapeutic Approaches and Drug Discovery > Emerging Technologies Nanotechnology Approaches to Biology > Nanoscale Systems in Biology Diagnostic Tools > Diagnostic Nanodevices Diagnostic Tools > In Vitro Nanoparticle-Based Sensing.

DNA-Condensed Plasmonic Supraballs Transparent to Molecules

DNA nanotechnology offers an unrivaled programmability of plasmonic nanoassemblies based on encodable Watson-Crick basepairing. However, it is very challenging to build rigidified three-dimensional supracolloidal assemblies with strong electromagnetic coupling and a self-confined exterior shape. We herein report an alternative strategy based on a DNA condensation reaction to make such structures. Using DNA-grafted gold nanoparticles as building blocks and metal ions with suitable phosphate affinities as abiological DNA-bonding agents, a seedless growth of spheroidal supraparticles is realized via metal-ion-induced DNA condensation. Some governing rules are disclosed in this process, including kinetic and thermodynamic effects stemming from electrostatic and coordinative forces with different interaction ranges. The supraballs are tailorable by adjusting the volumetric ratio between DNA grafts and gold cores and by overgrowing extra gold layers toward tunable plasmon coupling. Various appealing and highly desirable properties are achieved for the resulting metaballs, including (i) chemical reversibility and fixation ability, (ii) stability against denaturant, salt, and molecular adsorbates, (iii) enriched and continuously tunable plasmonic hotspots, (iv) permeability to small guest molecules and antifoulingness against protein contaminates, and (v) Raman-enhancing and photocatalytic activities. Innovative applications are thus foreseeable for this emerging class of meta-assemblies in contrast to what is achieved by DNA-basepaired ones.

Versatile synthesis of metal-compound based mesoporous Janus nanoparticles

The construction of mesoporous Janus nanoparticles (mJNPs) with controllable components is of great significance for the development of sophisticated nanomaterials with synergistically enhanced functionalities and applications. However, the compositions of reported mJNPs are mainly the functionally inert SiO₂ and polymers. The universal synthesis of metal-compound based mJNPs with abundant functionalities is urgently desired, but remains a substantial challenge. Herein, we present a hydrophilicity mediated interfacial selective assembly strategy for the versatile synthesis of metal-compound based mJNPs. Starting from the developed silica-based mJNPs with anisotropic dual-surface of hydrophilic SiO₂ and hydrophobic organosilica, metal precursor can selectively deposit onto the hydrophilic SiO₂ subunit to form the metal-compound based mJNPs. This method shows good universality and can be used for the synthesis of more than 20 kinds of metal-compound based mJNPs, including alkali-earth metal compounds, transition metal compounds, rare-earth metal compounds etc. Besides, the composition of the metal-compound subunit can be well tuned from single to multiple metal elements, even high-entropy complexes. We believe that the synthesis method and obtained new members of mJNPs provide a very broad platform for the construction and application of mJNPs with rational designed functions and structures.

Molecular Engineering of Colloidal Atoms

Creation of architectures with exquisite hierarchies actuates the germination of revolutionized functions and applications across a wide range of fields. Hierarchical self-assembly of colloidal particles holds the promise for materialized realization of structural programing and customizing. This review outlines the general approaches to organize atom-like micro- and nanoparticles into prescribed colloidal analogs of molecules by exploiting diverse interparticle driving motifs involving confining templates, interactive surface ligands, and flexible shape/surface anisotropy. Furthermore, the self-regulated/adaptive co-assembly of simple unvarnished building blocks is discussed to inspire new designs of colloidal assembly strategies.

Drug-Free Antimicrobial Nanomotor for Precise Treatment of Multidrug-Resistant Bacterial Infections

Manufacturing heteronanostructures with specific physicochemical characteristics and tightly controllable designs is very appealing. Herein, we reported NIR-II light-driven dual plasmonic (AuNR-SiO₂-Cu₇S₄) antimicrobial nanomotors with an intended Janus configuration through the overgrowth of copper-rich Cu₇S₄ nanocrystals at only one high-curvature site of Au nanorods (Au NRs). These nanomotors were applied for photoacoustic imaging (PAI)-guided synergistic photothermal and photocatalytic treatment of bacterial infections. Both the photothermal performance and photocatalytic activity of the nanomotors are dramatically improved owing to the strong plasmon coupling between Au NRs and the Cu₇S₄ component and enhanced energy transfer. The motion behavior of nanomotors promotes transdermal penetration and enhances the matter-bacteria interaction. More importantly, the directional navigation and synergistic antimicrobial activity of the nanomotors could be synchronously driven by NIR-II light. The marriage of active motion and enhanced antibacterial activity resulted in the expected good antibacterial effects in an abscess infection mouse model.

Facile Fabrication of Monodisperse Micron-Sized Dual Janus Silica Particles with Asymmetric Morphology and Chemical Environment

Janus particles are a kind of materials with asymmetric morphology or surface chemical environment. But so far, the preparation of particles with dual asymmetry is still a challenging problem. Hence the cation surfactant hexadecyl trimethyl ammonium bromide and co-surfactant octadecylamine are applied to improve the Pickering emulsion stability, and the micron-sized silica particles are arranged in a single layer at the toluene-water interface through electrostatic interaction. Furthermore, organosilane reagents are added in the preparation process, resulting in the construction of asymmetric hydrophilic or hydrophobic mesoporous precisely onto the micron-sized silica particles surface. The cation surfactant-assisted Pickering emulsion method is simple, effective, and convenience, which can be applied in the synthesis of various dual Janus silica particles for specific applications.

Gold-iron oxide (Au/Fe3O4) magnetic nanoparticles as the nanoplatform for binding of bioactive molecules through self-assembly

Nanomedicine plays a crucial role in the development of next-generation therapies. The use of nanoparticles as drug delivery platforms has become a major area of research in nanotechnology. To be effective, these nanoparticles must interact with desired drug molecules and release them at targeted sites. The design of these “nanoplatforms” typically includes a functional core, an organic coating with functional groups for drug binding, and the drugs or bioactive molecules themselves. However, by exploiting the coordination chemistry between organic molecules and transition metal centers, the self-assembly of drugs onto the nanoplatform surfaces can bypass the need for an organic coating, simplifying the materials synthesis process. In this perspective, we use gold-iron oxide nanoplatforms as examples and outline the prospects and challenges of using self-assembly to prepare drug-nanoparticle constructs. Through a case study on the binding of insulin on Au-dotted Fe3O4 nanoparticles, we demonstrate how a self-assembly system can be developed. This method can also be adapted to other combinations of transition metals, with the potential for scaling up. Furthermore, the self-assembly method can also be considered as a greener alternative to traditional methods, reducing the use of chemicals and solvents. In light of the current climate of environmental awareness, this shift towards sustainability in the pharmaceutical industry would be welcomed.

Development of Janus Particles as Potential Drug Delivery Systems for Diabetes Treatment and Antimicrobial Applications

Janus particles have emerged as a novel and smart material that could improve pharmaceutical formulation, drug delivery, and theranostics. Janus particles have two distinct compartments that differ in functionality, physicochemical properties, and morphological characteristics, among other conventional particles. Recently, Janus particles have attracted considerable attention as effective particulate drug delivery systems as they can accommodate two opposing pharmaceutical agents that can be engineered at the molecular level to achieve better target affinity, lower drug dosage to achieve a therapeutic effect, and controlled drug release with improved pharmacokinetics and pharmacodynamics. This article discusses the development of Janus particles for tailored and improved delivery of pharmaceutical agents for diabetes treatment and antimicrobial applications. It provides an account of advances in the synthesis of Janus particles from various materials using different approaches. It appraises Janus particles as a promising particulate system with the potential to improve conventional delivery systems, providing a better loading capacity and targeting specificity whilst promoting multi-drugs loading and single-dose-drug administration.

NMR Characterization of Nanoscale Surface Patterning in Mixed Ligand Nanoparticles

Spontaneous phase separation in binary mixed ligand shells is a proposed strategy to create patchy nanoparticles. The surface anisotropy, providing directionality along with interfacial properties emerging from both ligands, is highly desirable for targeted drug delivery, catalysis, and other applications. However, characterization of phase separation on the nanoscale remains quite challenging. Here we have adapted solid-state ¹H spin diffusion NMR experiments designed to detect and quantify spatial heterogeneity in polymeric materials to nanoparticles (NPs) functionalized with mixed short ligands. Janus NPs and physical mixtures of homoligand 3.5 nm diameter ZrO₂ NPs, with aromatic (phenylphosphonic acid, PPA) and aliphatic (oleic acid, OA) ligands, were used to calibrate the ¹H spin diffusion experiments. The Janus NPs, prepared by a facile wax/water Pickering emulsion method, and mixed ligand NPs, produced by ligand exchange, both with 1:1 PPA:OA ligand compositions, display strikingly different solvent and particle-particle interactions. ¹H spin diffusion NMR experiments are most consistent with a lamellar surface pattern for the mixed ligand ZrO₂ NPs. Solid-state ¹H spin diffusion NMR is shown to be a valuable additional characterization tool for mixed ligand NPs, as it not only detects the presence of nanoscale phase separation but also allows measurement of the domain sizes and geometries of the surface phase separation.

Self-Assembly of Matchstick-Shaped Inorganic Nano-Surfactants with Controlled Surface Amphiphilicity

Molecular and nanoscale amphiphiles have been extensively studied as building blocks for organizing macroscopic matter through specific and local interactions. Among various amphiphiles, inorganic Janus nanoparticles have attracted a lot of attention owing to their ability to impart multifunctionalities, although the programmability to achieve complicated self-assembly remains a challenge. Here, we synthesized matchstick-shaped Janus nano-surfactants that mimic organic surfactant molecules and studied their programmable self-assembly. High amphiphilicity was achieved through the hard-soft acid-base-based ligand-exchange reaction with strong selectivity on the surface of nano-matchsticks consisting of Ag₂S heads and CdS stems. The obtained nano-surfactants spontaneously assembled into diverse ordered structures such as lamellar, curved, wrinkled, cylindrical, and micellar structures depending on the vertical asymmetry and the interfacial tension controlled by their geometry and surface ligands. The correlation between the phase selectivity of suprastructures and the characteristics of nano-surfactants is discussed. This study realized the molecular amphiphile-like programmability of inorganic Janus nanostructures in self-assembly with the precise control on the surface chemistry.

A surfactant-free approach: Novel one-step ultrasonic nebulizer spray method to generate amphiphilic Janus particles

HYPOTHESIS

A solvent evaporation-induced phase separation method, which is based on the preferential partitioning of two or more immiscible materials after solvent evaporation on providing heat, has been one of the main strategies for synthesis of Janus particles (JPs). Considering this approach, it should be possible to synthesize surfactant free-JPs in continuous flow by the ultrasonic nebulizer spray method.

EXPERIMENTS

Two polymers, polystyrene and polymethylmethacrylate, were dissolved in dichloromethane, and droplets of a precursor solution generated by an ultrasonic nebulizer were then conveyed through a borosilicate glass cylinder with two heating zones. The solvent evaporation-induced phase separation occurred in a single flow process, which resulted in the preferential partitioning of two incompatible polymers in the droplets, leading to the formation of the spherical bicompartmental JPs.

FINDINGS

The successful fabrication of spherical JPs was observed at high polymer concentrations (1.5 and 2.0 wt%), and at elevated temperature (40-75 °C). The fluorescent compartmentalization of JPs was confirmed. Furthermore, the interfacial arrangement of JPs at oil-water interface was studied. A detailed explanation of theoretical prediction of interfacial configurations of JPs was provided. Lastly, the generated JPs were proved as Pickering stabilizers at the oil-water interface.

Patchy metal nanoparticles with polymers: controllable growth and two-way self-assembly

We report a new design of polymer-patched gold nanoparticles (AuNPs) with controllable interparticle interactions in terms of their direction and strength. Patchy AuNPs (pAuNPs) are prepared through hydrophobicity-driven surface dewetting under deficient ligand exchange conditions. Using the exposed surface on pAuNPs as seeds, a highly controllable growth of AuNPs is carried out via seed-mediated growth while retaining the size of polymer domains. As guided by ligands, these pAuNPs can self-assemble directionally in two ways along the exposed surface (head-to-head) or the polymer-patched surface of pAuNPs (tail-to-tail). Control of the surface asymmetry/coverage on pAuNPs provides an important tool in balancing interparticle interactions (attraction vs. repulsion) that further tunes assembled nanostructures as clusters and nanochains. The self-assembly pathway plays a key role in determining the interparticle distance and therefore plasmon coupling of pAuNPs. Our results demonstrate a new paradigm in the directional self-assembly of anisotropic building blocks for hierarchical nanomaterials with interesting optical properties.

Reconfigurable assembly of colloidal motors towards interactive soft materials and systems

Due to the highly flexible reconfiguration of swarms, collective behaviors have provided various natural organisms with a powerful adaptivity to the complex environment. To mimic these natural systems and construct artificial intelligent soft materials, self-propelled colloidal motors that can convert diverse forms of energy into swimming-like movement in fluids afford an ideal model system at the micro-/nanoscales. Through the coupling of local gradient fields, colloidal motors driven by chemical reactions or externally physical fields can assembly into swarms with adaptivity. Here, we summarize the progress on reconfigurable assembly of colloidal motors which is driven and modulated by chemical reactions and external fields (e.g., light, ultrasonic, electric, and magnetic fields). The adaptive reconfiguration behaviors and the corresponding mechanisms are discussed in detail. The future directions and challenges are also addressed for developing colloidal motor-based interactive soft matter materials and systems with adaptation and interactive functions comparable to that of natural systems.

Fabricating Dual-Functional Plasmonic-Magnetic Au@MgFe2O4 Nanohybrids for Photothermal Therapy and Magnetic Resonance Imaging

Bifunctional nanohybrids possessing both plasmonic and magnetic functionalities are of great interest for biomedical applications owing to their capability for simultaneous therapy and diagnostics. Herein, we fabricate a core-shell structured plasmonic-magnetic nanocomposite system that can serve as a dual-functional agent due to its combined photothermal therapeutic and magnetic resonance imaging (MRI) functions. The photothermal activity of the hybrid is attributed to its plasmonic Au core, which is capable of absorbing near-infrared (NIR) light and converting it into heat. Meanwhile, the magnetic MgFe₂O₄ shell exerts its ability to act as a MRI contrast agent. Our in vivo studies using tumor-bearing mice demonstrated the nanohybrids' excellent photothermal and MRI properties. As a photothermal therapeutic agent, the nanohybrids were able to dramatically shrink solid tumors in mice through NIR-induced hyperthermia. As T ₂-weighted MRI contrast agents, the nanohybrids were found capable of substantially reducing the MRI signal intensity of the tumor region at 10 min postinjection. With their dual plasmonic-magnetic functionality, these Au@MgFe₂O₄ nanohybrids hold great promise not only in the biomedical field but also in the areas of catalysis and optical sensing.

Synthesis, Assembly, Optical Properties, and Sensing Applications of Plasmonic Gap Nanostructures

Plasmonic gap nanostructures (PGNs) have been extensively investigated mainly because of their strongly enhanced optical responses, which stem from the high intensity of the localized field in the nanogap. The recently developed methods for the preparation of versatile nanogap structures open new avenues for the exploration of unprecedented optical properties and development of sensing applications relying on the amplification of various optical signals. However, the reproducible and controlled preparation of highly uniform plasmonic nanogaps and the prediction, understanding, and control of their optical properties, especially for nanogaps in the nanometer or sub-nanometer range, remain challenging. This is because subtle changes in the nanogap significantly affect the plasmonic response and are of paramount importance to the desired optical performance and further applications. Here, recent advances in the synthesis, assembly, and fabrication strategies, prediction and control of optical properties, and sensing applications of PGNs are discussed, and perspectives toward addressing these challenging issues and the future research directions are presented.

Controlled Assembly of Plasmonic Nanoparticles: From Static to Dynamic Nanostructures

The spatial arrangement of plasmonic nanoparticles can dramatically affect their interaction with electromagnetic waves, which offers an effective approach to systematically control their optical properties and manifest new phenomena. To this end, significant efforts were made to develop methodologies by which the assembly structure of metal nanoparticles can be controlled with high precision. Herein, recent advances in bottom-up chemical strategies toward the well-controlled assembly of plasmonic nanoparticles, including multicomponent and multifunctional systems are reviewed. Further, it is discussed how the progress in this area has paved the way toward the construction of smart dynamic nanostructures capable of on-demand, reversible structural changes that alter their properties in a predictable and reproducible manner. Finally, this review provides insight into the challenges, future directions, and perspectives in the field of controlled plasmonic assemblies.

Effective Structure Control of Colloidal Molecules and the Morphology Evolution Mechanism Investigation

Colloidal molecules (CMs), nonspherical clusters of a small number of particles, can be used as building blocks for self-assembly applications. Here, we propose a novel one pot method for CMs synthesis. First, poly(N-isopropylacrylamide-co-acrylic acid) (P(NIPAM-co-AA)) microgels were prepared by soap-free emulsion polymerization as seed particles, then monomer styrene and cross-linking agent divinylbenzene (DVB) were added, which could be polymerized by the remaining free radicals on the seed surface in situ. P(NIPAM-co-AA)-PS colloidal molecules with a series of morphologies such as popcorn-like, CO₂-like, NH₃-like, CH₄-like and so on could be obtained. The effects of satellite colloid viscosity, interfacial tension, and polymer chain mobility on the number of satellite colloid have been investigated, and the formation mechanism of CMs is proposed based on morphology evolution investigation. Compared with the existing CM synthesis techniques, our method enables fabricating CMs from vinyl monomer in a facile and efficient way, and the scientific finding regarding the CMs formation will guide the CMs fabrication toward salable and reliable direction.

Localized surface plasmon resonance induced assembly of bimetal nanochains

Bimetal nanochains (NCs) are attracting increasing attention in the fields of catalysis and electrocatalysis due to the synergistic effects in electronic and optical properties, but the fabrication of bimetal NCs remains challenging. Here, we report a general strategy named "nucleation in the irradiation then growth in the dark" for the preparation of Au/M (second metal) NCs. In the irradiation stage, the localized surface plasmon resonance (LSPR) effect of Au NPs is excited to overcome the nucleation energy barrier for the deposition of second metals (Pt, Ag and Pd). In the followed dark process, the preferential growth of second metals on the existed nucleus leads to the formation of nanochain rather than the core/shell nanostructure. In the model reaction of electrocatalytic hydrogen evolution, the optimized Au/Pt NCs showed much better performance compared with the commercial Pt/C.

Au-Fe3O4 nanoagent coated cell membrane for targeted delivery and enhanced chem/photo therapy

Here, we propose a cancer cell membrane (CM) coated Au-Fe₃O₄ complex (AFTP@CM), loaded with tannic acid and phorbol 12-myristate 13-acetate for targeted drug delivery and enhanced chem/photo therapy.

Photo-Responsive Self-Assembly of Plasmonic Magnetic Janus Nanoparticles

Stimuli-responsive self-assembly of nanoparticles is a versatile approach for the bottom-up fabrication of adaptive and functional nanomaterials. For this purpose, anisotropic building blocks are of particular importance due to the unique shapes and structures that can be obtained upon self-assembly. Here, we demonstrate the photo-responsive self-assembly of plasmonic magnetic "dumbbell" Janus nanoparticles (Au-Fe₃O₄) via the host-guest interaction of the supramolecular host cyclodextrin and the molecular photoswitch arylazopyrazole. We developed efficient ligand exchange procedures that enable the introduction of functional ligands, respectively, to the surface of the gold or magnetite core of the dumbbell. Our results indicate that distinct nanoparticle superstructures arise in aqueous solutions if nanoparticle aggregation is crosslinker-induced or self-induced and that the reversible formation and fragmentation of the superstructures can be modulated with light.

Biobased superhydrophobic coating enabled by nanoparticle assembly

Understanding biobased nanocomposites is critical in fabricating high performing sustainable materials. In this study, fundamental nanoparticle assembly structures at the nanoscale are examined and correlated with the macroscale properties of coatings formulated with these structures. Nanoparticle assembly mechanisms within biobased polymer matrices were probed using in situ liquid-phase atomic force microscopy (AFM) and computational simulation. Furthermore, coatings formulated using these nanoparticle assemblies with biobased polymers were evaluated with regard to the hydrophobicity and adhesion after water immersion. Two biobased glycopolymers, hydroxyethyl cellulose (HEC) and hydroxyethyl starch (HES), were investigated. Their repeating units share the same chemical composition and only differ in monomer conformations (α- and β-anomeric glycosides). Unique fractal structures of silica nanoparticle assemblies were observed with HEC, while compact clusters were observed with HES. Simulation and AFM measurement suggest that strong attraction between silica surfaces in the HEC matrix induces diffusion-limited-aggregation, leading to large-scale, fractal assembly structures. By contrast, weak attraction in HES only produces reaction-limited-aggregation and small compact cluster structures. With high particle loading, the fractal structures in HEC formed a network, which enabled a waterborne formulation of superhydrophobic coating after silane treatment. The silica nanoparticle assembly in HEC was demonstrated to significantly improve adhesion, which showed minimum adhesion loss even after extended water immersion. The superior performance was only observed with HEC, not HES. The results bridge the assembly structures at the nanoscale, influenced by molecular conformation of biobased polymers, to the coating performance at the macroscopic level. Through this study we unveil new opportunities in economical and sustainable development of high-performance biobased materials.

Green Synthesis of Luminescent Gold-Zinc Oxide Nanocomposites: Cell Imaging and Visible Light-Induced Dye Degradation

Green synthesis of gold-zinc oxide (Au-ZnO) nanocomposite was successfully attempted under organic solvent–free conditions at room temperature. Prolonged stirring of the reaction mixture introduced crystallinity in the ZnO phase of Au-ZnO nanocomposites. Luminescence properties were observed in these crystalline Au-ZnO nanocomposites due to in situ embedding of gold nanoparticles (AuNP) of 5–6 nm diameter on the surface. This efficient strategy involved the reduction of Au(III) by Zn(0) powder in aqueous medium, where sodium citrate (NaCt) was the stabilizing agent. Reaction time and variation of reagent concentrations were investigated to control the Au:Zn ratio within the nanocomposites. The reaction with the least amount of NaCt for a long duration resulted in Au-ZnO/Zn(OH)₂ nanocomposite. X-ray photoelectron spectroscopy (XPS) confirmed the formation of Zn(OH)₂ and ZnO in the same nanocomposite. These nanocomposites were reconnoitered as bioimaging materials in human cells and applied for visible light–induced photodegradation of rhodamine-B dye.

The fabrication of hollow ZrO2 nanoreactors encapsulating Au-Fe2O3 dumbbell nanoparticles for CO oxidation

Nanosized Au catalysts suffer from serious sintering problems during synthesis or catalytic reactions at high temperatures. In this work, we integrate dumbbell-shaped Au-Fe₃O₄ heterostructures into hollow ZrO₂ nanocages to make Au-Fe₂O₃@ZrO₂ yolk-shell nanoreactors with high activity as well as ultra-high sintering resistance for high-temperature CO oxidation. The synthesis starts with the fabrication of a (Au-Fe₃O₄)@SiO₂@ZrO₂ core-shell nanostructure with a Au-Fe₃O₄ dumbbell nanoparticle (DB) core and SiO₂/ZrO₂ double shells, followed by calcination and the selective removal of the inner SiO₂ shell with alkaline solution to obtain Au-Fe₂O₃@ZrO₂ nanoreactors. The retained ZrO₂ hollow (outer) shells protect the Au NPs from aggregation at temperatures up to 900 °C and show excellent long-term stability. Compared to Au@ZrO₂ yolk-shell nanoreactors, Au-Fe₂O₃@ZrO₂ shows improved activity in CO oxidation due to the active Au-Fe₂O₃ interface. This strategy can be extended to other yolk-shell nanoreactors with various nanocomposites and for different catalytic reactions.

Organic/inorganic nanohybrids rejuvenate photodynamic cancer therapy

The development of nanotechnology has changed the 100-year-old paradigm of photodynamic therapy (PDT), in which organic/inorganic hybrid nanomaterials have made great contributions. In this review, we first describe the mechanisms of PDT and discuss the limitations of conventional PDT. On this basis, we summarize recent progress in organic/inorganic nanohybrids-based photodynamic agents, highlighting how these nanohybrids can be programmed to overcome challenges in photodynamic cancer therapy.

Modular Construction of Prussian Blue Analog and TiO2 Dual-Compartment Janus Nanoreactor for Efficient Photocatalytic Water Splitting

Janus structures that include different functional compartments have attracted significant attention due to their specific properties in a diverse range of applications. However, it remains challenge to develop an effective strategy for achieving strong interfacial interaction. Herein, a Janus nanoreactor consisting of TiO2 2D nanocrystals integrated with Prussian blue analog (PBA) single crystals is proposed and synthesized by mimicking the planting process. In situ etching of PBA particles induces nucleation and growth of TiO2 nanoflakes onto the concave surface of PBA particles, and thus enhances the interlayer interaction. The anisotropic PBA-TiO2 Janus nanoreactor demonstrates enhanced photocatalytic activities for both water reduction and oxidation reactions compared with TiO2 and PBA alone. As far as it is known, this is the first PBA-based composite that serves as a bifunctional photocatalyst for solar water splitting. The interfacial structure between two materials is vital for charge separation and transfer based on the spectroscopic studies. These results shed light on the elaborate construction of Janus nanoreactor, highlighting the important role of interfacial design at the microscale level.

Activation and Assembly of Plasmonic-Magnetic Nanosurfactants for Encapsulation and Triggered Release

Multifunctional surfactants hold great potentials in catalysis, separation, and biomedicine. Highly active plasmonic-magnetic nanosurfactants are developed through a novel acid activation treatment of Au-Fe₃O₄ dumbbell nanocrystals. The activation step significantly boosts nanosurfactant surface energy and enables the strong adsorption at interfaces, which reduces the interfacial energy one order of magnitude. Mediated through the adsorption at the emulsion interfaces, the nanosurfactants are further constructed into free-standing hierarchical structures, including capsules, inverse capsules, and two-dimensional sheets. The nanosurfactant orientation and assembly structures follow the same packing parameter principles of surfactant molecules. Furthermore, nanosurfactants demonstrate the capability to disperse and encapsulate homogeneous nanoparticles and small molecules without adding any molecular surfactants. The assembled structures are responsive to external magnetic field, and triggered release is achieved using an infrared laser by taking advantage of the enhanced surface plasmon resonance of nanosurfactant assemblies. Solvent and pH changes are also utilized to achieve the cargo release.

Multiple-stimuli-responsiveness and conformational inversion of smart supramolecular nanoparticles assembled from spin labeled amphiphilic random copolymers

HYPOTHESIS

Organic radical polymers with tailored pendant functionalities have emerged as exciting and promising materials for their application versatility. Moreover, eco-friendly polymer-based organic nanomaterials with redox-active pendant side groups can replace the harmful heavy metal-based inorganic materials. On the other hand, self-assembled nanomaterials are of great interest and attracted more attention recently for their promising application in different advanced fields, but it is yet challenging to predict suitable hydrophilic-lipophilic balance (HLB) for stimuli-responsive random copolymers assembly due to structural irregularity. Among several experimental techniques, electron paramagnetic resonance (EPR) spectroscopy plays a unique and promising role in revealing structural and dynamic information of nanostructured radical containing materials.

EXPERIMENTS

In this study, a series of spin labeled amphiphilic random copolymers poly(methyl methacrylate-co-acrylic acid) have been synthesized and characterized by FT-IR, UV-Vis spectroscopies, TGA, DSC and water contact angle (CA) techniques. Their electrochemical properties have been determined by cyclic voltammetry (CV) in different organic solvents. EPR spectroscopy has been applied with other analytical techniques to elucidate the smart supramolecular nanoparticles (SNPs) formation, stimuli-responsiveness and structural changes through the dynamics of different molecular interactions.

FINDINGS

The structural and dynamic information of self-assembled nanoparticles have been observed to be dependent on multiple-stimuli-responsiveness in different microenvironments by applying physiological and chemical parameters such as the different concentration of radicals, pH, temperature, nature of the solvent and reducing agent. The obtained results reveal the knowledge to understand insight into the mechanism for the formation of stimuli-responsive colloidal nanoparticles assembled from amphiphilic random copolymers with apt HLB value. The CV results reveal that the charge transfer process of the nanoparticles in solution was diffusion regulated and depended on the accessibility of radicals. The radical (spin labeled) polymers offer a broad way to develop stimuli-responsive materials in various colloidal nanostructures by changing the microenvironment, appreciating their potential advanced applications in electronic devices, catalysis, stimuli-triggered drug/gene delivery and reactive oxygen species (ROS) scavenger.

Unique Orientation of the Solid-Solid Interface at the Janus Particle Boundary Induced by Ionic Liquids

This study reveals the unique role on Janus particles of the solid-solid interface at the boundary in determining particle interactions and assembly. In an aqueous ionic liquid (IL) solution, Janus spheres adopt intriguing orientations with their boundaries pinned on the glass substrate. It was further discovered that the orientation was affected by the particle amphiphilicity as well as the chemical structure and concentration of the IL. Further characterization suggests that the adsorption on the hydrophilic side is due to both an electrostatic interaction and hydrogen bonding, while adsorption on the hydrophobic side is due to hydrophobic attraction. Through the concerted interplay of all these interactions, the amphiphilic boundary may attract an excessive amount of IL cations, which guide the unique orientations of the Janus spheres. The results highlight the importance of the Janus boundary that has not been recognized previously. Adsorption at the solid-solid interfaces may inspire new applications in areas such as separation and catalysis.

Shedding Light on the Role of Misfit Strain in Controlling Core-Shell Nanocrystals

Heteroepitaxial modification of nanomaterials has become a powerful means to create novel functionalities for various applications. One of the most elementary factors in heteroepitaxial nanostructures is the misfit strain arising from mismatched lattices of the constituent parts. Misfit strain not only dictates epitaxy kinetics for diversifying nanocrystal morphologies but also provides rational control over materials properties. In recent years, advances in chemical synthesis along with the rapid development of electron microscopy and X-ray diffraction techniques have enabled a substantial understanding of strain-related processes, which offers theoretical foundation and experimental guidance for researchers to refine heteroepitaxial nanostructures and their properties. Herein, recent investigations on heterogeneous core-shell nanocrystals containing misfit strains are summarized, with a focus on the mechanistic understanding of strain and strain-induced effects such as tuning the epitaxial habit, modulating the optical emission, and enhancing the catalytic activity and magnetic coercivity.

Polymeric Ligand-Mediated Regioselective Bonding of Plasmonic Nanoplates and Nanospheres

Nanoparticle (NP) clusters are attractive for many applications, but controllable and regioselective assembly of clusters remains challenging. This communication reports a strategy to precisely assemble Ag nanoplates (NP-As) and Au nanospheres (NP-Bs) grafted with copolymer ligands into defined AB_x clusters with controlled coordination number (x) and orientation of the NPs. The directional bonding of shaped NPs relies on the stoichiometric reaction of complementary reactive groups on copolymer ligands. The x value of NP clusters can be tuned from 1 to 4 by varying the number ratio of reactive groups on single NP-Bs to NP-As. The regioselective bonding of nanospheres to the edge or face of a central nanoplate is governed by the steric hindrance of copolymeric ligands on the nanoplate. The clusters exhibit distinctive plasmonic properties that are dependent on the bonding modes of NPs. This study paves a route to fabricating nanostructures with high precision and complexity for applications in plasmonics, catalysis, and sensing.

Self-assembly behavior of experimentally realizable lobed patchy particles

We report simulation studies on the self-assembly behavior of five different types of lobed patchy particles of different shapes (snowman, dumbbell, trigonal planar, square planar, and tetrahedral). Inspired by an experimental method of synthesizing patchy particles (Wang et al., Nature, 2012, 491, 51-55), we control the lobe size indirectly by gradually varying the seed diameter and study its effect on self-assembled structures at different temperatures. Snowman shaped particles self-assemble only at a lower temperature and form two-dimensional sheets, elongated micelles, and spherical micelles, depending on the seed diameter. Each of the four other lobed particles self-assemble into four distinct morphologies (random aggregates, spherical aggregates, liquid droplets, and crystalline structures) for a given lobe size and temperature. We observed temperature-dependent transitions between two morphologies depending on the type of the lobed particle. The self-assembled structures formed by these four types of particles are porous. We show that their porosities can be tuned by controlling the lobe size and temperature.

Self-assembly of anisotropic nanoparticles into functional superstructures

Self-assembly of colloidal nanoparticles (NPs) into superstructures offers a flexible and promising pathway to manipulate the nanometer-sized particles and thus make full use of their unique properties. This bottom-up strategy builds a bridge between the NP regime and a new class of transformative materials across multiple length scales for technological applications. In this field, anisotropic NPs with size- and shape-dependent physical properties as self-assembly building blocks have long fascinated scientists. Self-assembly of anisotropic NPs not only opens up exciting opportunities to engineer a variety of intriguing and complex superlattice architectures, but also provides access to discover emergent collective properties that stem from their ordered arrangement. Thus, this has stimulated enormous research interests in both fundamental science and technological applications. This present review comprehensively summarizes the latest advances in this area, and highlights their rich packing behaviors from the viewpoint of NP shape. We provide the basics of the experimental techniques to produce NP superstructures and structural characterization tools, and detail the delicate assembled structures. Then the current understanding of the assembly dynamics is discussed with the assistance of in situ studies, followed by emergent collective properties from these NP assemblies. Finally, we end this article with the remaining challenges and outlook, hoping to encourage further research in this field.

Self-assembly of Janus Au:Fe3O4 branched nanoparticles. From organized clusters to stimuli-responsive nanogel suprastructures

Janus nanoparticles offer enormous possibilities through a binary selective functionalization and dual properties. Their self-assembly has attracted strong interest due to their potential as building blocks to obtain molecular colloids, supracrystals and well-organized nanostructures that can lead to new functionalities. However, this self-assembly has been focused on relatively simple symmetrical morphologies, while for complex nanostructures this process has been unexplored. Here, we study the assembly of plasmonic-magnetic Janus nanoparticles with a branched (nanostar) - sphere morphology. The branched morphology enhances their plasmonic properties in the near-infrared region and therefore their applicability, but at the same time constrains their self-assembly capabilities to obtain more organized or functional suprastructures. We describe the self-assembly of these nanoparticles after amphiphilic functionalization. The role of the nanoparticle branching, as well as the size of the polymer-coating, is explored. We show how the use of large molecular weight stabilizing polymers can overcome the anisotropy of the nanoparticles producing a change in the morphology from small clusters to larger quasi-cylindrical nanostructures. Finally, the Janus nanoparticles are functionalized with a thermo-responsive elastin-like recombinamer. These nanoparticles undergo reversible self-assembly in the presence of free polymer giving rise to nanoparticle-stabilized nanogel-like structures with controlled size, providing the possibility to expand their applicability to multi-stimuli controlled self-assembly.

Janus and core@shell gold nanorod@Cu2−xS supraparticles: reactive site regulation fabrication, optical/catalytic synergetic effects and enhanced photothermal efficiency/photostability

We herein present a reactive site regulation strategy for fabricating well-defined Janus and core@shell gold nanorod-Cu_2−xS dual metal–semiconductor plasmonic supraparticles.

Molecular-like selectivity emerges in nanocrystal chemistry

Applying the molecular concepts of regioselectivity and chemoselectivity to nanocrystal chemistry is giving access to complex nanostructures with spatial precision.

Alloy, Janus and core-shell nanoparticles: numerical modeling of their nucleation and growth in physical synthesis

While alloy, core-shell and Janus binary nanoclusters are found in more and more technological applications, their formation mechanisms are still poorly understood, especially during synthesis methods involving physical approaches. In this work, we employ a very simple model of such complex systems using Lennard-Jones interactions and inert gas quenching. After demonstrating the ability of the model to well reproduce the formation of alloy, core-shell or Janus nanoparticles, we studied their temporal evolution from the gas via droplets to nanocrystalline particles. In particular, we showed that the growth mechanisms exhibit qualitative differences between these three chemical orderings. Then, we determined how the quenching rate can be used to finely tune structural characteristics of the final nanoparticles, including size, shape and crystallinity.