Silanized Luminescent Quantum Dots for the Simultaneous Multicolor Lateral Flow Immunoassay of Two Mycotoxins

Biosensors based on core-shell nanoparticles for detecting mycotoxins in food: A review

Mycotoxins are toxic metabolites produced by fungi in the process of infecting agricultural products, posing serious threat to the health of human and animals. Thus, sensitive and reliable analytical techniques for mycotoxin detection are needed. Biosensors equipped with antibodies or aptamers as recognition elements and core-shell nanoparticles (NPs) for the pre-treatment and detection of mycotoxins have been extensively studied. By comparison with monocomponent NPs, core-shell nanostructures exhibit unique optical, electric, magnetic, plasmonic, and catalytic properties due to the combination of functionalities and synergistic effects, resulting in significant improvement of sensing capacities in various platforms, such as surface-enhanced Raman spectroscopy, fluorescence, lateral flow immunoassay and electrochemical sensors. This review focused on the development of core-shell NPs based biosensors for the sensitive and accurate detection of mycotoxins in food samples. Recent developments were categorised and summarised, along with detailed discussion of advantages and shortcomings. The future potential of utilising core-shell NPs in food safety testing was also highlighted.

High Bioaffinity Controllable Assembly Nanocarrier UiO-66-NH2@Quantum Dot-Based Immunochromatographic Assay for Simultaneous Detection of Five Mycotoxins in Cereals and Feed

Herein, the UiO-66-NH2@quantum dot (NU66@QD) was synthesized with excellent fluorescence intensity and biocompatibility, which was used to develop a multiple immunochromatographic assay (ICA) for the detection of aflatoxin B1 (AFB1), fumonisin B1 (FB1), deoxynivalenol (DON), T-2 toxins (T-2), and zearalenone (ZEN) in cereals and feed. Five monoclonal antibodies and NU66@QD were efficiently labeled by a one-step mixed method to form a multiple detection probe. The limits of detection of the proposed NU66@QD-ICA for AFB1/FB1/DON/T-2/ZEN were 0.04/0.28/0.25/0.09/0.08 μg/kg. The recoveries ranged from 82.83-117.44%, with the coefficient of variation from 2.88-11.80%. A parallel analysis in 35 naturally contaminated cereal and feed samples was confirmed by LC-MS/MS, and the results showed a good correlation (R2 > 0.9), indicating the practical reliability of the multiple NU66@QD-ICA. Overall, the introduction of the novel nanomaterial NU66@QD provides a highly sensitive and efficient multiplex detection strategy for the development of ICA.

Recent advances in fluorescence-based chemosensing of organoarsenic feed additives using luminescence MOFs, COFs, HOFs, and QDs

Organoarsenics are low-toxicity compounds that are used widely as feed additives to promote livestock growth, enhance meat pigmentation, and fight against intestinal parasites. The organoarsenic compounds are commonly found in poultry waste and the degradation of organoarsenic produces the toxic carcinogen inorganic arsenic such as As(V) and As(III), which results in severe arsenic pollution of soil and groundwater. As a consequence, there exists a high necessity to develop suitable sensing methods for the trace detection and quantification of organoarsenic feed additives in wastewater. Among various detection methods, in particular, fluorescence-based sensing has become a popular and efficient method used extensively for sensing water contaminants and environmental contaminants. In the recent past, a wide variety of fluorescence chemosensors have been designed and employed for the efficient sensing and quantification of the concentration of organoarsenic feed additives in different environmental samples. This review article systematically highlights various fluorescence chemosensors reported to date for fluorescence-based sensing of organoarsenic feed additives. The fluorescence sensors discussed in this review are classified and grouped according to their structures and functions, and in each section, we provide a detailed report on the structure, photophysics, and fluorescence sensing properties of different chemosensors. Lastly, the future perspectives on the design and development of practically useful sensor systems for selective and discriminative sensing of organoarsenic compounds have been stated.

Direct Optical Patterning of Quantum Dots: One Strategy, Different Chemical Processes

Patterning, stability, and dispersion of the semiconductor quantum dots (scQDs) are three issues strictly interconnected for successful device manufacturing. Recently, several authors adopted direct optical patterning (DOP) as a step forward in photolithography to position the scQDs in a selected area. However, the chemistry behind the stability, dispersion, and patterning has to be carefully integrated to obtain a functional commercial device. This review describes different chemical strategies suitable to stabilize the scQDs both at a single level and as an ensemble. Special attention is paid to those strategies compatible with direct optical patterning (DOP). With the same purpose, the scQDs' dispersion in a matrix was described in terms of the scQD surface ligands' interactions with the matrix itself. The chemical processes behind the DOP are illustrated and discussed for five different approaches, all together considering stability, dispersion, and the patterning itself of the scQDs.

Fluorescent Alloyed CdZnSeS/ZnS Nanosensor for Doxorubicin Detection

Doxorubicin (DOX) is widely used in chemotherapy as an anti-tumor drug. However, DOX is highly cardio-, neuro- and cytotoxic. For this reason, the continuous monitoring of DOX concentrations in biofluids and tissues is important. Most methods for the determination of DOX concentrations are complex and costly, and are designed to determine pure DOX. The purpose of this work is to demonstrate the capabilities of analytical nanosensors based on the quenching of the fluorescence of alloyed CdZnSeS/ZnS quantum dots (QDs) for operative DOX detection. To maximize the nanosensor quenching efficiency, the spectral features of QDs and DOX were carefully studied, and the complex nature of QD fluorescence quenching in the presence of DOX was shown. Using optimized conditions, turn-off fluorescence nanosensors for direct DOX determination in undiluted human plasma were developed. A DOX concentration of 0.5 µM in plasma was reflected in a decrease in the fluorescence intensity of QDs, stabilized with thioglycolic and 3-mercaptopropionic acids, for 5.8 and 4.4 %, respectively. The calculated Limit of Detection values were 0.08 and 0.03 μg/mL using QDs, stabilized with thioglycolic and 3-mercaptopropionic acids, respectively.

Recent Trends in Lateral Flow Immunoassays with Optical Nanoparticles

Rapid, accurate, and convenient diagnosis is essential for effective disease management. Various detection methods, such as enzyme-linked immunosorbent assay, have been extensively used, with lateral flow immunoassay (LFIA) recently emerging as a major diagnostic tool. Nanoparticles (NPs) with characteristic optical properties are used as probes for LFIA, and researchers have presented various types of optical NPs with modified optical properties. Herein, we review the literature on LFIA with optical NPs for the detection of specific targets in the context of diagnostics.

Facile immunochromatographic assay based on metal-organic framework-decorated polydopamine for the determination of hydrochlorothiazide adulteration in functional foods

Herein, a novel immunochromatographic assay (ICA) based on metal-organic framework-decorated polydopamine (MOF@PDA) was firstly developed for the determination of hydrochlorothiazide (HCTZ) adulteration in functional foods. The coupling rate of MOF@PDA carrier to HCTZ antibody was as high as 91.7 %. The detection limits of the developed MOF@PDA-ICA in functional tablets and capsules were 5.93 and 4.72 μg/kg, the linear ranges were 11.2-91.91 μg/kg and 9.11-86.78 μg/kg, respectively. The sensitivity was 27-fold higher than that of the reported ICA. The recovery was 82.5-116.6 %, and coefficient of variation was 6.9-14.2 %. The results can be achieved and analyzed in 8 min with the smartphone-based detection device. The parallel tests of 23 commercial functional tablets and capsules showed that the results of the MOF@PDA-ICA were consistent with that of the LC-MS/MS (R² > 0.99). Therefore, our method is facile, sensitive, portable, and can provide a reliable technical mean for the detection of HCTZ adulteration in functional foods.

A fluorescent lateral flow immunoassay based on CdSe/CdS/ZnS quantum dots for sensitive detection of olaquindox in feedstuff

A portable fluorescence immunosensor based on the CdSe/CdS/ZnS quantum dots (QDs) with multiple-shell structure was fabricated for the precise quantification of olaquindox (OLA). The QDs labeled anti-OLA antibody used as bioprobe played an important role in the design and preparation of a lateral flow test strip. Due to the strong fluorescent intensity of QDs, the sensitivity is greatly improved. The quantitative results were obtained using a fluorescent strip scan reader within 8 min, and the calculated limit of detection for OLA at 0.12 µg/kg, which was 2.7 times more sensitive than that of the conventional colloidal gold-based strips method. Acceptable recovery of 85.0%-95.5% was obtained by the spiked samples. This newly established QDs-based strip immunoassay method is suitable for the on-site detection and rapid initial screening of OLA in swine feedstuff, and is potentially applied for the detection of other veterinary drugs to ensure food safety.

Red-Emitting Latex Nanoparticles by Stepwise Entrapment of β-Diketonate Europium Complexes

The core-shell structure of poly(St-co-MAA) nanoparticles containing β-diketonate Eu³⁺ complexes were synthesized by a step-wise process. The β-diketonate Eu³⁺ complexes of Eu (TFTB)₂(MAA)P(Oct)₃ [europium (III); 4,4,4-Trifluoro-1-(2-thienyl)-1,3-butanedione = TFTB; trioctylphosphine = (P(Oct)₃); methacrylic acid = MAA] were incorporated to poly(St-co-MAA). The poly(St-co-MAA) has highly monodispersed with a size of 300 nm, and surface charges of the poly(St-co-MAA) are near to neutral. The narrow particle size distribution was due to the constant ionic strength of the polymerization medium. The activated carboxylic acid of poly(St-co-MAA) further chelated with europium complex and polymerize between acrylic groups of poly(St-co-MAA) and Eu(TFTB)₂(MAA)P(Oct)₃. The E_m spectra of europium complexes consist of multiple bands of E_m at 585, 597, 612 and 650 nm, which are assigned to ⁵D₀→⁷F_{J (J = 0-3)} transitions of Eu³⁺, respectively. The maximum E_m peak is at 621 nm, which indicates a strong red E_m characteristic associated with the electric dipole ⁵D₀→⁷F₂ transition of Eu³⁺ complexes. The cell-specific fluorescence of Eu(TFTB)₂(MAA)P(Oct)₃@poly(St-co-MAA) indicated endocytosis of Eu(TFTB)₂(MAA)P(Oct)₃@poly(St-co-MAA). There are fewer early apoptotic, late apoptotic and necrotic cells in each sample compared with live cells, regardless of the culture period. Eu(TFTB)₂(MAA)P(Oct)₃@poly(St-co-MAA) synthesized in this work can be excited in the full UV range with a maximum E_m at 619 nm. Moreover, these particles can substitute red luminescent organic dyes for intracellular trafficking and cellular imaging agents.

A High-Quality CdSe/CdS/ZnS Quantum-Dot-Based FRET Aptasensor for the Simultaneous Detection of Two Different Alzheimer's Disease Core Biomarkers

The simultaneous detection of two different biomarkers for the point-of-care diagnosis of major diseases, such as Alzheimer’s disease (AD), is greatly challenging. Due to the outstanding photoluminescence (PL) properties of quantum dots (QDs), a high-quality CdSe/CdS/ZnS QD-based fluorescence resonance energy transfer (FRET) aptasensor for simultaneously monitoring the amyloid-β oligomers (AβO) and tau protein was proposed. By engineering the interior inorganic structure and inorganic−organic interface, water-soluble dual-color CdSe/CdS/ZnS QDs with a near-unity PL quantum yield (>90%) and mono-exponential PL decay dynamics were generated. The π−π stacking and hydrogen bond interaction between the aptamer-functionalized dual-color QDs and gold nanorods@polydopamine (Au NRs@PDA) nanoparticles resulted in significant fluorescence quenching of the QDs through FRET. Upon the incorporation of the AβO and tau protein, the fluorescence recovery of the QDs-DNA/Au NRs@PDA assembly was attained, providing the possibility of simultaneously assaying the two types of AD core biomarkers. The lower detection limits of 50 pM for AβO and 20 pM for the tau protein could be ascribed to the distinguishable and robust fluorescence of QDs and broad spectral absorption of Au NRs@PDA. The sensing strategy serves as a viable platform for the simultaneously monitoring of the core biomarkers for AD and other major diseases.

Golf-shaped Bi2Se3 microparticles based-immunochromatographic strip for ultrasensitive detection of Acetamiprid

Rapid and sensitive detection of pesticide is of significance to the field of food safety and human health, but it is still challenging due to interferents from complex food matrices. Herein, a superb golf-shaped Bi₂Se₃ microparticles-based immunochromatographic strip (BS MPs-ICS) was constructed for ultrasensitive detection of acetamiprid (ATM). The novel immune signal tag demonstrated outstanding luminance, excellent biocompatibility, and high affinity with ATM (affinity constant was 3.874 ×10⁷ M^-1), which not only possessed a preeminent labeling efficiency but also significantly improved detection sensitivity. After optimization, the limit of detection (LOD) of the BS MPs-ICS was 8.780 pg/mL with an excellent linear relationship at the range of 0.010-6.000 ng/mL, which was approximately 62-fold lower than that of conventional gold nanoparticles-ICS (0.545 ng/mL), The BS MPs-ICS biosensor was well applied in apple and tomato samples with satisfactory recoveries of 83.823-99.223% (relative standard deviation < 1.739%). Therefore, the BS MPs-ICS could serve as a promising candidate for ATM detection in complicated samples and develop a new method in real-time monitoring.

Recent Advances in Silica-Nanomaterial-Assisted Lateral Flow Assay

Lateral flow assays (LFAs) have attracted much attention as rapid and affordable point-of-care devices for medical diagnostics. The global SARS-CoV-2 pandemic has further highlighted the importance of LFAs. Many efforts have been made to enhance the sensitivity of LFAs. In recent years, silica nanomaterials have been used to either amplify the signal of label materials or provide stability, resulting in better detection performance. In this review, the recent progress of silica-nanomaterial-assisted LFAs is summarized. The impact of the structure of silica nanomaterials on LFA performance, the challenges and prospects in this research area are also discussed.

The evolution of multiplex detection of mycotoxins using immunoassay platform technologies

Mycotoxins present serious threats not only for public health, but also for the economy and environment. The problems become more complex and serious due to co-contamination of multiple hazardous mycotoxins in commodities and environment. To mitigate against this issue, accurate, affordable, and rapid multiplex detection methods are required. This review presents an overview of emerging rapid immuno-based multiplex methods capable of detecting mycotoxins present in agricultural products and feed ingredients published within the past five years. The scientific principles, advantages, disadvantages, and assay performance of these rapid multiplex immunoassays, including lateral flow, fluorescence polarization, chemiluminescence, surface plasmon resonance, surface enhanced Raman scattering, electrochemical sensor, and nanoarray are discussed. From the recent literature landscape, it is predicted that the future trend of the detection methods for multiple mycotoxins will rely on the advance of various sensor technologies, a variety of enhancing and reporting signals based on nanomaterials, rapid and effective sample preparation, and capacity for quantitative analysis.

Expanded detection range of lateral flow immunoassay endowed with a third-stage amplifier indirect probe

Here, a third-stage amplifier indirect probe (TsAIP) based lateral flow immunoassay (LFIA) was proposed to detect furazolidone (FZD) with Prussian blue nanoparticles (PBNPs) as carrier to label the goat anti-mouse antibody-horseradish peroxidase conjugation [GAMA(HRP)]. In this strategy, owing to the fact that one monoclonal antibody (mAb) can combine several GAMA molecules simultaneously, the indirect probe can generate primary signal amplification, then realize second-stage amplification attributing to PBNPs, and finally achieve third-stage amplification because of the conjugated HRP. The TsAIP-based LFIA shows improved performance for FZD metabolite derivative with a detection limit of 1 ng mL^-1. The detection range is expanded about 2-fold compared with the original outcome. Besides, the proposed sensor could be successfully applied in food samples. This method provides a platform for broadening the detection range and application of PBNPs based LFIAs.

Fluorescence Biosensor for One-Step Simultaneous Detection of Mycobacterium tuberculosis Multidrug-Resistant Genes Using nanoCoTPyP and Double Quantum Dots

The diagnosis of multidrug-resistant tuberculosis (MDR-TB) is crucial for the subsequent drug guidance to improve therapy and control the spread of this infectious disease. Herein, we developed a novel florescence biosensor for simultaneous detection of Mycobacterium tuberculosis (Mtb) multidrug-resistant genes (rpoB531 for rifampicin and katG315 for isoniazid) by using our synthesized nanocobalt 5,10,15,20-tetra(4-pyridyl)-21H,23H-porphine (nanoCoTPyP) and double quantum dots (QDs). Several nanoCoTPyPs with different charges and morphology were successfully prepared via the surfactant-assisted method and their quenching ability and restoring efficiency for DNA detection were systematically analyzed. It was found that spherical nanoCoTPyP with positive charge exhibited excellent quenching effect and sensing performance for the two DNAs' detection due to its affinity differences towards single-stranded DNA (ssDNA) and double-stranded DNA (dsDNA). ssDNA attached on QDs (QDs-ssDNA) was specifically hybridized with targets to form QDs-dsDNA, resulting in fluorescence recovery due to the disruption of the interactions between nanoCoTPyP and ssDNA. Two drug-resistant genes could be simultaneously quantified in a single run and relatively low limits of detection (LODs) were obtained (24 pM for T1 and 20 pM for T2). Furthermore, the accuracy and reliability of our method were verified by testing clinical samples. This simple and low-cost approach had great potential to be applied in clinical diagnosis of MDR-TB.

Application of Nanomaterials for Coping with Mycotoxin Contamination in Food Safety: From Detection to Control

Mycotoxins, which are toxic secondary metabolites produced by fungi, are harmful to humans. Mycotoxin-induced contamination has drawn attention worldwide. Consequently, the development of reliable and sensitive detection methods and high-efficiency control strategies for mycotoxins is important to safeguard food industry safety and public health. With the rapid development of nanotechnology, many novel nanomaterials that provide tremendous opportunities for greatly improving the detection and control performance of mycotoxins because of their unique properties have emerged. This review comprehensively summarizes recent trends in the application of nanomaterials for detecting mycotoxins (fluorescence, colorimetric, surface-enhanced Raman scattering, electrochemical, and point-of-care testing) and controlling mycotoxins (inhibition of fungal growth, mycotoxin absorption, and degradation). These detection methods possess the advantages of high sensitivity and selectivity, operational simplicity, and rapidity. With research attention on the control of mycotoxins and the gradual excavation of the properties of nanomaterials, nanomaterials are also employed for the inhibition of fungal growth, mycotoxin absorption, and mycotoxin degradation, and impressive controlling effects are obtained. This review is expected to provide the readers insight into this state-of-the-art area and a reference to design nanomaterials-based schemes for the detection and control of mycotoxins.

New Approach to Generate Ratiometric Signals on Immunochromatographic Strips for Small Molecules

The self-calibration capability of ratiometric signals has been widely considered to enhance the accuracy, sensitivity, and anti-interference ability of immunoassays. Exploring a new approach to generate ratiometric signals can provide more options for various requirements. Herein, we integrated the negative-readout competitive and positive-readout noncompetitive immunoassays into a single assay by employing different color tracers, labeled peptidomimetic and anti-immunocomplex peptides, to create a new unconstrained ratiometric signal approach. Using an immunochromatographic strip (ICS) and a fungicide benzothiostrobin as the analytical platform and analyte, respectively, we showed that this approach can be extensively applied to fluorescence and colorimetry readouts, which have also been proven for strong anti-interference ability to an external light environment. Moreover, the enormous intuitional color changes of ratiometric fluorescent and colorimetric ICSs (RFICS and RCICS) enabled the formation of the color reference cards (like the pH paper) for visual judgment. After adaptation with a portable smartphone, the quantitative detection limits for RFICS and RCICS were 0.17 and 0.44 ng mL^-1, respectively. In addition, the ICSs showed good accuracy for the detection of benzothiostrobin in spiked samples.

Biomolecular Surface Functionalization and Stabilization Method to Fabricate Quantum Dots Nanobeads for Accurate Biosensing Detection

The surface functionalization of quantum dots (QDs) is essential for their application as a label material in a biological field. Here, a protein surface functionalization approach was introduced to combine with silica encapsulation for the sustainable and stable synthesis of QDs nanobeads for biomarker detection. The formation of QDs nanobeads was achieved by multiple mercapto groups in bovine serum albumin (BSA) macromolecules as multidentate ligands to replace hydrophobic ligands on the surface of QDs and decompression. The resulting QDs nanobeads exhibited 20 times more photoluminescence than the corresponding hydrophobic QDs and presented excellent stability under physiological conditions due to the protection of BSA and silica. The nanobeads served as a robust signal-generating reagent to construct the lateral flow immunoassay (LFIA) biosensor for the detection of glycosylated hemoglobin (HbA1c). The concentration of HbA1c was determined within 10 min with high specificity using only 60 μL of whole blood samples collected clinically. The nanobeads-based LFIA biosensor exhibited linear detection of HbA1c from 4.2% to 13.6%. The accuracy and stability of this approach in clinical utility was demonstrated by the detection of HbA1c after a long-term storage of test strips. This protein surface modification technology provides a new way for improving the biological properties of QDs in clinical diagnosis.

Influence of particle architecture on the photoluminescence properties of silica-coated CdSe core/shell quantum dots

Light-emitting nanoparticles like semiconductor nanocrystals (termed quantum dots, QDs) are promising candidates for biosensing and bioimaging applications based on their bright and stable photoluminescent properties. As high-quality QDs are often synthesized in organic solvents, strategies needed to be developed to render them water-dispersible without affecting their optical properties and prevent changes in postmodification steps like the biofunctionalization with antibodies or DNA. Despite a large number of studies on suitable surface modification procedures, the preparation of water-soluble QDs for nanobiotechnology applications still presents a challenge. To highlight the advantages of surface silanization, we systematically explored the influence of the core/multishell architecture of CdSe/CdS/ZnS QDs and the silanization conditions on the optical properties of the resulting silanized QDs. Our results show that the optical properties of silica-coated CdSe/CdS/ZnS QDs are best preserved in the presence of a thick CdS (6 monolayers (ML)) intermediate shell, providing a high photoluminescence quantum yield (PL QY), and a relatively thick ZnS (4.5 ML) external shell, effectively shielding the QDs from the chemical changes during silica coating. In addition to the QD core/shell architecture, other critical parameters of the silica-coating process, that can have an influence on the optical properties of the QD, include the choice of the surfactant and its concentration used for silica coating. The highest PL QY of about 46% was obtained by a microemulsion silica-coating procedure with the surfactant Brij L4, making these water-dispersible QDs to well-suited optical reporters in future applications like fluorescence immunoassays, biomedicine, and bioimaging.

Developments in mycotoxin analysis: an update for 2020-2021

This review summarises developments published in the period from mid-2020 to mid-2021 on the analysis of a number of diverse matrices for mycotoxins. Notable developments in all aspects of mycotoxin analysis, from sampling and quality assurance/quality control of analytical results, to the various detection and quantitation technologies ranging from single mycotoxin biosensors to comprehensive instrumental methods are presented and discussed. The summary and discussion of this past year’s developments in detection and quantitation technology covers chromatography with targeted or non-targeted high resolution mass spectrometry, tandem mass spectrometry, detection other than mass spectrometry, biosensors, as well as assays using alternatives to antibodies. This critical review aims to briefly present the most important recent developments and trends in mycotoxin determination, as well as to address limitations of the presented methodologies.

Development of a label-free plasmonic gold nanoparticles aggregates sensor on the basis of charge neutralization for the detection of zearalenone

Mycotoxin contamination of corn has been considered a serious problem because it can accumulate in different organs or tissues via ingestion or skin contact and cause several health problems in humans. We have constructed a label-free, colorimetric, and fluorescence dual-channel sensing platform for the detection of zearalenone. Here, we demonstrate that plasmonic gold nanoparticles aggregates could be rapidly formed on the basis of charge neutralization by positively charged SYBR Green I. The sensing platform allowed quantitative detection as low as 0.89 μg kg^-1 and visual detection as low as 2.5 μg kg^-1. The charge neutralization strategy eliminates a major source of instability in conventional gold nanoparticles colorimetric measurements and paves the way for accurate, label-free bioanalysis.

Recent Progress in Rapid Determination of Mycotoxins Based on Emerging Biorecognition Molecules: A Review

Mycotoxins are secondary metabolites produced by fungal species, which pose significant risk to humans and livestock. The mycotoxins which are produced from Aspergillus, Penicillium, and Fusarium are considered most important and therefore regulated in food- and feedstuffs. Analyses are predominantly performed by official laboratory methods in centralized labs by expert technicians. There is an urgent demand for new low-cost, easy-to-use, and portable analytical devices for rapid on-site determination. Most significant advances were realized in the field bioanalytical techniques based on molecular recognition. This review aims to discuss recent progress in the generation of native biomolecules and new bioinspired materials towards mycotoxins for the development of reliable bioreceptor-based analytical methods. After brief presentation of basic knowledge regarding characteristics of most important mycotoxins, the generation, benefits, and limitations of present and emerging biorecognition molecules, such as polyclonal (pAb), monoclonal (mAb), recombinant antibodies (rAb), aptamers, short peptides, and molecularly imprinted polymers (MIPs), are discussed. Hereinafter, the use of binders in different areas of application, including sample preparation, microplate- and tube-based assays, lateral flow devices, and biosensors, is highlighted. Special focus, on a global scale, is placed on commercial availability of single receptor molecules, test-kits, and biosensor platforms using multiplexed bead-based suspension assays and planar biochip arrays. Future outlook is given with special emphasis on new challenges, such as increasing use of rAb based on synthetic and naïve antibody libraries to renounce animal immunization, multiple-analyte test-kits and high-throughput multiplexing, and determination of masked mycotoxins, including stereoisomeric degradation products.

Organic Cation Receptor for Colorimetric Lateral Flow Device: Detection of Zearalenone in Food Samples

As per the WHO reports, it has been estimated that almost 25% of food crops contain mycotoxins as the major contaminant. In this work, we developed a paper-based colorimetric lateral flow device (CLFD) impregnated with an organic cation receptor (OCR) for sensitive and selective detection of zearalenone (ZEN). Various techniques such as ultraviolet (UV)-visible absorption, cyclic voltammetry, and fluorescence spectroscopy were used for the detection of mycotoxins, and it was observed that OCR shows sensitivity and selectivity toward zearalenone (ZEN) only, irrespective of any other analytes. Furthermore, the colorimetric test revealed that the developed OCR shows a change in color with the addition of ZEN from greenish-gray to blue that is visible to the naked eye. The quantification of ZEN was also achieved using RGB analysis and compared with UV-visible spectroscopy data. Further, for the on-site detection of ZEN, a paper-based CLFD was also developed and used to evaluate the spiked corn sample containing ZEN, and it provided significant results with a limit of detection (LOD) of 0.31 nM (3σ method), good linearity (R² = 0.9702), good reproducibility (SD = ±6%, triplicate), and good recovery of ZEN of 95-102% with a variation coefficient (VC) varying from 1.56 to 4.62%. Therefore, the device has the potential to check the mycotoxin toxicity in food products and is helpful in remote and developing areas.

An Overview for the Nanoparticles-Based Quantitative Lateral Flow Assay

The development of the lateral flow assay (LFA) has received much attention in both academia and industry because of their broad applications to food safety, environmental monitoring, clinical diagnosis, and so forth. The user friendliness, low cost, and easy operation are the most attractive advantages of the LFA. In recent years, quantitative detection has become another focus of LFA development. Here, the most recent studies of quantitative LFAs are reviewed. First, the principles and corresponding formats of quantitative LFAs are introduced. In the biomaterial and nanomaterial sections, the detection, capture, and signal amplification biomolecules and the optical, fluorescent, luminescent, and magnetic labels used in LFAs are described. The invention of dedicated strip readers has drawn further interest in exploiting the better performance of LFAs. Therefore, next, the development of dedicated reader devices is described and the usefulness and specifications of these devices for LFAs are discussed. Finally, the applications of LFAs in the detection of metal ions, biotoxins, pathogenic microorganisms, veterinary drugs, and pesticides in the fields of food safety and environmental health and the detection of nucleic acids, biomarkers, and viruses in clinical analyses are summarized.

Lateral Flow Immunoassay with Quantum-Dot-Embedded Silica Nanoparticles for Prostate-Specific Antigen Detection

Prostate cancer can be detected early by testing the presence of prostate-specific antigen (PSA) in the blood. Lateral flow immunoassay (LFIA) has been used because it is cost effective and easy to use and also has a rapid sample-to-answer process. Quantum dots (QDs) with very bright fluorescence have been previously used to improve the detection sensitivity of LFIAs. In the current study, a highly sensitive LFIA kit was devised using QD-embedded silica nanoparticles. In the present study, only a smartphone and a computer software program, ImageJ, were used, because the developed system had high sensitivity by using very bright nanoprobes. The limit of PSA detection of the developed LFIA system was 0.138 ng/mL. The area under the curve of this system was calculated as 0.852. The system did not show any false-negative result when 47 human serum samples were analyzed; it only detected PSA and did not detect alpha-fetoprotein and newborn calf serum in the samples. Additionally, fluorescence was maintained on the strip for 10 d after the test. With its high sensitivity and convenience, the devised LFIA kit can be used for the diagnosis of prostate cancer.

Quantitative assessment of AD markers using naked eyes: point-of-care testing with paper-based lateral flow immunoassay

Aβ42 is one of the most extensively studied blood and Cerebrospinal fluid (CSF) biomarkers for the diagnosis of symptomatic and prodromal Alzheimer's disease (AD). Because of the heterogeneity and transient nature of Aβ42 oligomers (Aβ42Os), the development of technologies for dynamically detecting changes in the blood or CSF levels of Aβ42 monomers (Aβ42Ms) and Aβ42Os is essential for the accurate diagnosis of AD. The currently commonly used Aβ42 ELISA test kits usually mis-detected the elevated Aβ42Os, leading to incomplete analysis and underestimation of soluble Aβ42, resulting in a comprised performance in AD diagnosis. Herein, we developed a dual-target lateral flow immunoassay (dLFI) using anti-Aβ42 monoclonal antibodies 1F12 and 2C6 for the rapid and point-of-care detection of Aβ42Ms and Aβ42Os in blood samples within 30 min for AD diagnosis. By naked eye observation, the visual detection limit of Aβ42Ms or/and Aβ42Os in dLFI was 154 pg/mL. The test results for dLFI were similar to those observed in the enzyme-linked immunosorbent assay (ELISA). Therefore, this paper-based dLFI provides a practical and rapid method for the on-site detection of two biomarkers in blood or CSF samples without the need for additional expertise or equipment.

Recent advances in immunoassays and biosensors for mycotoxins detection in feedstuffs and foods

Mycotoxins are secondary metabolites produced by fungus. Many mycotoxin species are highly toxic and are frequently found in cereals and feedstuffs. So, powerful detection methods are vital and effective ways to prevent feed contamination. Traditional detection methods can no longer meet the needs of massive, real-time, simple, and fast mycotoxin monitoring. Rapid detection methods based on advanced material and sensor technology are the future trend. In this review, we highlight recent progress of mycotoxin rapid detection strategies in feedstuffs and foods, especially for simultaneous multiplex mycotoxin determination. Immunoassays, biosensors, and the prominent roles of nanomaterials are introduced. The principles of different types of recognition and signal transduction are explained, and the merits and pitfalls of these methods are compared. Furthermore, limitations and challenges of existing rapid sensing strategies and perspectives of future research are discussed.

Synthesis and Application of Silica-Coated Quantum Dots in Biomedicine

Quantum dots (QDs) are semiconductor nanoparticles with outstanding optoelectronic properties. More specifically, QDs are highly bright and exhibit wide absorption spectra, narrow light bands, and excellent photovoltaic stability, which make them useful in bioscience and medicine, particularly for sensing, optical imaging, cell separation, and diagnosis. In general, QDs are stabilized using a hydrophobic ligand during synthesis, and thus their hydrophobic surfaces must undergo hydrophilic modification if the QDs are to be used in bioapplications. Silica-coating is one of the most effective methods for overcoming the disadvantages of QDs, owing to silica's physicochemical stability, nontoxicity, and excellent bioavailability. This review highlights recent progress in the design, preparation, and application of silica-coated QDs and presents an overview of the major challenges and prospects of their application.

A quantum dot microspheres-based highly specific and sensitive three-dimensional microarray for multiplexed detection of inflammatory factors

The development trend ofin vitrodiagnostics is to obtain various biological information from a sample at extremely low concentration and volume, which has promoted its progress in accurate and sensitive multiplexed detection. Here, we developed a single color quantum dot (QD) based three-dimensional (3D) structure matrix microarray and conducted the detection of two inflammatory factors (C-reactive protein (CRP) and serum amyloid A (SAA)) by a self-built fluorescence detection system. This strategy increased detection sensitivity by immobilizing the antibody specifically on the 3D substrate because it captured more than about 7 times of 'effective' antibodies compared to the two-dimensional (2D) plane. Compared to the dual QDs-2D fluorescence-linked immunosorbent assay, the limit of detection (LOD) of 3D microarray based on QDs modified with amphiphilic polymers has been further improved to 0.11 ng ml^-1for SAA assay and to 0.16 ng ml^-1for CRP assay, respectively. By using QD microspheres (SiO₂@QDs@SiO₂-COOH, containing approximately 200-300 hydrophobic QDs on per SiO₂sphere) as fluorescent labels, the LOD for CRP and SAA of 3D microarray reached as high as 15 pg ml^-1and 86 pg ml^-1, and the sensitivity was further improved by 28-fold and 425-fold, respectively. Because of its excellent performance, this QD microspheres-based 3D microarray has great application potential for highly sensitive and multiplexed quantitative detection of other biomarkers, small molecules, and antibiotic residues in biomedicine and food safety.

One-step time-resolved fluorescence microsphere immunochromatographic test strip for quantitative and simultaneous detection of DON and ZEN

Deoxynivalenol (DON) and zearalenone (ZEN) are mycotoxins that contaminate a wide range of grains and crops. In this study, a one-step time-resolved single-channel immunochromatographic test strip based on europium ion polystyrene fluorescence microspheres was first developed for sensitive and quantitative detection of DON and ZEN. The concentration of the artificial antigen and the mass ratio of the monoclonal antibody to fluorescent microspheres for conjugation were optimized to simplify the sample addition process during immunochromatographic assay and improve the on-site detection efficiency. The limits of detection (LOD) of the single-channel immunochromatographic test strip for DON and ZEN detection were 0.17 and 0.54 μg/L, respectively. Meanwhile, the dual-channel immunochromatographic test strip was designed to simultaneously detect DON and ZEN, with LODs of 0.24 and 0.69 μg/L achieved for DON and ZEN, respectively. The developed test strips also yielded recovery results consistent with that obtained by LC-MS/MS for DON and ZEN detection in real samples of wheat and corn flour, confirming the practicability and reliability of the test strip. The developed immunochromatographic test strips realize quick and sensitive detection of DON and ZEN, exhibiting potential for broad applications in the point-of-care testing platform of multiple mycotoxins in agricultural products. Graphic abstract.

Multiple fluorescence immunoassay for the simultaneous detection of Zearalenone and Ochratoxin A

A sensitive and accurate multiple fluorescence immunoassay for the simultaneous quantitative detection of Zearalenone (ZEN) and Ochratoxin A (OTA) in single spot based on multicolor quantum dots (QDs) labeling was developed for the first time. Two kinds of ZnCdSe/ZnS (core/shell) QDs with maximum emission wavelengths at 520 nm (green) and 610 nm (orange-red) were selected as marking materials, respectively. The anti-ZEN-mAb-QDs and anti-OTA-mAb-QDs were designed as the immune fluorescent probes. Fluorescence was measured at the same excitation wavelength and two different emission wavelengths to determine each target. The procedure for QDs-based multiple fluorescence labeled immunosorbent assay (M-FLISA) was developed. The 50% inhibition concentrations (IC₅₀) of ZEN and OTA were 0.034 and 1.175 ng/mL. Moreover, the limits of detection (LOD) for the simultaneous determination were 0.0239 and 2.339 ng/g for ZEN and OTA in maize, respectively. In addition, the recoveries ranged from 93.15 to 101.90% for ZEN and from 95.29 to 102.43% for OTA, with the coefficient variation (CV) of 2.70-8.86% and 3.51-6.22% respectively. There was good consistency between the M-FLISA and high performance liquid chromatography (HPLC) results, which confirmed that the M-FLISA was suitable for the simultaneous quantitative detection of various mycotoxins.

Sensitive Immunoassay Based on Biocompatible and Robust Silica-Coated Cd-Free InP-Based Quantum Dots

Low-toxic InP quantum dots (QDs) as an ideal candidate for Cd-based QDs have tremendous potential for next-generation commercial display and biological detection applications. However, the progress in biological detection is still far behind that of the Cd-based QDs. This is mainly because the InP-based QDs are of inferior stability and photoluminescence quantum yield (PL QY) in aqueous solution. Here, PL QY of 65% and excellent stability of InP/GaP/ZnS QD@SiO₂ nanoparticles have been successfully synthesized via a silica coating method. The containing thiol-capped hydrophobic InP/GaP/ZnS QDs were pre-silanized with waterless, ammonia-free hydrolysis tetraethyl orthosilicate, and subsequently, an outer silica shell was generated in the reverse microemulsion. The corresponding QD-based fluorescence-linked immunosorbent assay exhibits a high sensitivity of 0.9 ng mL^-1 for C-reactive protein and the broad detection range of 1-1000 ng mL^-1, which was close to that of the state-of-the-art Cd-based QD@SiO₂ nanoparticles and had the highest sensitivity of Cd-free QDs so far. This work provides a very successful silica coating method for the containing thiol-capped hydrophobic QDs and the QDs highly sensitive to water and oxygen, and the obtained InP/GaP/ZnS QD@SiO₂ nanoparticles were considered as the robust, biocompatible, and promising Cd-free fluorescent labels for the further ultra-sensitive detection.

Diverse Dyes-Embedded Staphylococcus aureus as Potential Biocarriers for Enhancing Sensitivity in Biosensing

Nanomaterials-based immunochromatographic assays (ICAs) have gained great commercial success in real-life point-of-care testing (POCT). Exploring novel carriers of ICAs with improved signaling and sustained activity favors the development of sensitive POCT. Herein a potent signal biotag, colored Staphylococcus aureus (SA), was created for ICA carriers through a mild self-assembly strategy, providing high luminance and abundant specific binding sites for immobilization of monoclonal antibodies (mAbs). The biocompatible SA-dyes (SADs) retained both an intact surface structure for mAbs labeling (Fc portion) and the superior bioactivity of immobilized mAbs (affinity constant was about 10⁹ M^-1), thus waiving the intrinsic limitations of traditional nanomaterials and endowing high sensitivity. Proof-of-concept was demonstrated by employing Congo red- or/and fluorescein isothiocyanate-embedded SA (SACR, SAFITC, and SACR-SAFITC) as ICA carriers to detect zearalenone (ZEN) through colorimetric or/and fluorimetric signals. Furthermore, the ICAs satisfied the clinical requirement perfectly, including limit of detection (0.013 ng/mL, which was at least an 85-fold improvement over that of traditional gold nanoparticles-based ICA), linearity (R² > 0.98), reproducibility (RSD < 8%), selectivity, and stability. Importantly, the proposed biosensors could be well-applied in four real samples for ZEN monitoring with satisfactory recoveries, correlating well with the results from liquid chromatography-tandem mass spectrometry (LC-MS). This work also proved a universal design for tailoring coloration bands for SAD-ICA detection of multiple analytes.

Well-orientation strategy for direct binding of antibodies: Development of the immunochromatographic test using the antigen modified Fe2O3 nanoprobes for sensitive detection of aflatoxin B1

One of the major concerns in the application of nanocarriers in biosensing is the impair of the recognition molecules bioactivity loaded on their surfaces due to harsh and laborious cross-linking and random orientation, resulting in unsatisfactory sensitivity. Herein, we proposed a novel immunochromatographic test strip (FNS-ag-DICTS) by taking advantage of the antigen (ag) modified Fe₂O₃ nanostructures (FNSs) as new signal tags and goat anti-mouse IgG labeling on the detection line instead of ag, which was used for sensitive detection of aflatoxin B₁ (AFB₁). The fabricated FNS-ag can orientate the Fab region of monoclonal antibodies (mAbs), waiving the intrinsic limitations of traditional nanomaterials labeled mAbs. Under optimal conditions, FNS-ag-DICTS possessed excellent specificity and a wide detection range, with a visual limit of detection (vLOD) of 0.0125 ng mL^-1. In addition, the biosensor successfully detected AFB₁ in peanut, green bean and corn, with an average recovery rate of 82.8-124.9%.

Luminous silica colloids with carbon dot incorporation for sensitive immunochromatographic assay of Zika virus

Fluorescent SiO₂ colloids prepared from silanized CDs embedded in silica spheres were integrated with an immunochromatographic platform for Zika virus detection.

Lateral Flow Immunosensor for Ferritin Based on Dual Signal-Amplified Strategy by Rhodium Nanoparticles

Lateral flow immunoassay (LFIA) is one of the most widely used tools for analysis and field measurement and has the advantages of high efficiency, simple operation, portability, and low cost. Therefore, in this study, we designed a proof-of-concept of LFIA based on rhodium nanoparticles and investigated its improvement by further introducing the tetramethyl benzidine and H₂O₂ mixture as the substrate to trigger the color reaction. The proposed methods were qualitative research by the naked eye and quantitative measurement by a smartphone and software. Under the optimal condition, the detection of ferritin was successfully established with the limit of detection of 0.3 ng/mL. The lowest visually detectable amount was 0.05 ng/mL. To verify the performance of the RhNPs-LFIA, three spiked serum samples were tested, and the recovery rate increased from 88.9 to 129.9%, revealing that the proposed methods were applicable and practically reliable for testing serum samples. The developed RhNP-based LFIA is highly sensitive and convenient, which provides a promising technology for accurate, rapid, high sensitivity, and high screening detection of ferritin in clinical diagnosis.

Analysis of multiple mycotoxins-contaminated wheat by a smart analysis platform

This study describes a smart analysis platform capable of quantitative measurements using a multiplex lateral flow strip. Using the multi-mycotoxin strip, five fungal toxins were simultaneously and quantitatively detected in naturally contaminated wheat. First, a matrix-based standard curve was established for the detection of aflatoxin B1 (AFB1), fumonisin B1 (FB1), T-2, deoxynivalenol (DON), and zearalenone (ZEN). Established on an open android system, the platform is able to read 6 lines on the strip simultaneously. The platform is equipped with a Quick Response code scanning model, which reads the established standard curves, and then rapidly quantify mycotoxins in naturally contaminated wheat. All the data and sample information are stored on a central server through the platform which is linked to the cloud. The limits of detection (LOD) for AFB1, FB1, T-2, DON, and ZEN in wheat were 4, 20, 10, 200, and 40 μg/kg and the visual cut off values was 20, 1000, 200, 4000, and 400 μg/kg, separately. To validate the platform and the multi-mycotoxin detection method, 10 wheat samples were analyzed and the results were in a good agreement with those obtained by LC-MS/MS. The platform will be a powerful tool for crop monitoring services.