Self-Adapting Hydrogel to Improve the Therapeutic Effect in Wound-Healing

Polyvinyl alcohol/casein hydrogels with oxymatrine eluting ability for cancer-related wound management

Malignant fungating wounds (MFWs) are cancer-related complications that arise from metastases in advanced cancers. They appear in 5-14% of cancer patients, with higher prevalence in breast (66%) and head and neck (24%) cancers. Novel therapeutic routes for the management of MFWs rely on plant-based treatments, e.g. oxymatrine (OXM), an alkaloid derived from a Chinese plant with anticancer and anti-inflammatory properties. The objective of this work was to assess the potential of polyvinyl alcohol/casein (PVA/CAS) hydrogels to be used as dressings for OXM delivery. CAS can stimulate the immune system, while PVA is one of the most used synthetic polymers in the composition of hydrogels for medical applications. Six different hydrogel formulations were prepared following different procedures: freeze-thawing (FT) and cast drying (CD) for 24 or 48 h, with and without the addition of genipin (GE), a crosslinking agent. The hydrogels were loaded with OXM, and their release behaviour was studied. PVA/CAS-24CD + GE showed the best release profile. After being subjected to sterilisation by high hydrostatic pressure, it was further investigated in terms of physicochemical properties, mechanical characteristics and biocompatibility. Overall, this hydrogel revealed adequate characteristics to be used as a biocompatible medicated dressing for OXM release.

A battery-free nanofluidic intracellular delivery patch for internal organs

The targeted delivery of therapeutics to internal organs to, for example, promote healing or apoptosis holds promise in the treatment of numerous diseases1-4. Currently, the prevailing delivery modality relies on the circulation; however, this modality has substantial efficiency, safety and/or controllability limitations5-9. Here we report a battery-free, chipless, soft nanofluidic intracellular delivery (NanoFLUID) patch that provides enhanced and customized delivery of payloads in targeted internal organs. The chipless architecture and the flexible nature of thin functional layers facilitate integration with internal organs. The nanopore-microchannel-microelectrode structure enables safe, efficient and precise electroperforation of the cell membrane, which in turn accelerates intracellular payload transport by approximately 105 times compared with conventional diffusion methods while operating under relatively low-amplitude pulses (20 V). Through evaluations of the NanoFLUID patch in multiple in vivo scenarios, including treatment of breast tumours and acute injury in the liver and modelling tumour development, we validated its efficiency, safety and controllability for organ-targeted delivery. NanoFLUID-mediated in vivo transfection of a gene library also enabled efficient screening of essential drivers of breast cancer metastasis in the lung and liver. Through this approach, DUS2 was identified as a lung-specific metastasis driver. Thus, NanoFLUID represents an innovative bioelectronic platform for the targeted delivery of payloads to internal organs to treat various diseases and to uncover new insights in biology.

pH-responsive and self-adaptive injectable sodium alginate/carboxymethyl chitosan hydrogel accelerates infected wound healing by bacteriostasis and immunomodulation

Infected wound healing is a global medical challenge due to persistent bacterial infection and excess inflammation. Designing microenvironment-responsive and self-adaptive hydrogels with antibacterial and anti-inflammatory properties is expected to be an effective strategy to promote infected wound healing. In this study, a self-adaptive injectable sodium alginate/carboxymethyl chitosan hydrogel (SCSC) for pH-responsive release of curcumin has been prepared at room temperature by simple stirring. The incorporation of the crosslinker, Sr2+, enhances mechanical properties of SCSC hydrogel by tensing network structures, and provides synergistic biological activities. Meanwhile, SCSC hydrogel self-adapts in irregular wound shapes with outstanding ECM-like performance and releases effectively in the acidic microenvironment simulating the initial stage of infected wounds. SCSC hydrogel with good biocompatibility can promote cell migration, while relieving oxidative stress and mitochondria damage. Notably, SCSC hydrogel inhibits inflammatory factor expression and promotes M2 macrophage polarization by suppressing the NF-κB signaling pathway. Further, SCSC hydrogel significantly downregulates the over-expression of matrix metalloproteinase-9 (MMP-9), thereby helping promote ECM reconstruction. In vivo experiment results further demonstrate that SCSC hydrogel accelerates the re-epithelialization of infected wounds on the back of rats. Thus, the pH-responsive and self-adaptive SCSC hydrogel possesses great potential in the management and control of infected wounds.

Polymer Applied in Hydrogel Wound Dressing for Wound Healing: Modification/Functionalization Method and Design Strategies

Hydrogel wound dressings have emerged as a promising solution for wound healing due to their excellent mechanical and biochemical properties. Over recent years, there has been significant progress in expanding the variety of raw materials used for hydrogel formulation along with the development of advanced modification techniques and design approaches that enhance their performance. However, a comprehensive review encompassing diverse polymer modification strategies and design innovations for hydrogel dressings is still lacking in the literature. This review summarizes the use of natural polymers (e.g., chitosan, gelatin, sodium alginate, hyaluronic acid, and dextran) and synthetic polymers (e.g., poly(vinyl alcohol), polyethylene glycol, Pluronic F-127, poly(N-isopropylacrylamide), polyacrylamide, and polypeptides) in hydrogel wound dressings. We further explore the advantages and limitations of these polymers and discuss various modification strategies, including cationic modification, oxidative modification, double-bond modification, catechol modification, etc. The review also addresses design principles and synthesis methods, aligning polymer modifications with specific requirements in wound healing. Finally, we discuss future challenges and opportunities in the development of advanced hydrogel-based wound dressings.

Lemon Juice-Infused PVA Nanofibers for the Development of Sustainable Antioxidant and Antibacterial Electrospun Hydrogel Biomaterials

Cross-linking bonds adjacent polymer chains into a three-dimensional network. Cross-linked poly(vinyl alcohol) (PVA) turns into a hydrogel, insoluble structure exhibiting outstanding sorption properties. As an electrospinnable polymer, PVA enables the creation of nanofibrous hydrogels resembling biological tissues, thus ideal for nature-inspired platforms. PVA properties are easily adjustable through additives and an appropriate cross-linking method. Drawing inspiration from environmentally safe approaches, this work developed a new "green" method of low-temperature PVA cross-linking. Nanofibers were electrospun from a precursor solution of PVA dissolved in fresh lemon juice, stabilized by heating at 60 °C for 7 days, and thoroughly characterized. The obtained nanoplatform demonstrated long-term stability and enhanced mechanical properties. Its biocompatibility was confirmed, and its antibacterial and health-promoting effects were attributed to lemon juice-rich in vitamin C, a potent antioxidant with anti-inflammatory properties. The developed system has future potential for use in the biomedical engineering field as a dressing accelerating wound healing.

In Situ Formation of Hydrogels Loaded with ZnO Nanoparticles Promotes Healing of Diabetic Wounds in Rats

The challenge of healing diabetic skin wounds presents a significant hurdle in clinical practice and scientific research. In response to this pressing concern, we have developed a temperature-sensitive, in situ-forming hydrogel comprising poly(n-isopropylacrylamide166-co-n-butyl acrylate9) -poly(ethylene glycol) -poly(n-isopropylacrylamide166-co-butyl acrylate9) copolymer, denoted as PEP, in combination with zinc oxide nanoparticles, forming what we refer to as PEP-ZnO hydrogel. The antimicrobial properties of the PEP-ZnO hydrogel against methicillin-resistant Staphylococcus aureus were rigorously assessed by using the bacteriostatic banding method. In vitro evaluations encompassed examinations of hemocompatibility and biocompatibility. The study further employed a diabetic Sprague-Dawley (SD) rat whole-layer trauma model for comprehensive in vivo analyses. In vivo healing assessments revealed the potential of the PEP-ZnO hydrogel, characterized by increased collagen deposition and enhanced vascularization at the trauma site, thus significantly expediting the healing process. Collectively, these findings endorse the PEP-ZnO hydrogel as a safe and effective dressing for addressing chronic wounds in diabetic patients. This hydrogel not only holds promise for improving the quality of life for diabetic individuals grappling with chronic wounds but also represents a noteworthy advancement in wound care.

Polysaccharide-Based Hydrogels for Advanced Biomedical Engineering Applications

In recent years, numerous applications of hydrogels using polysaccharides have evolved, benefiting from their widespread availability, excellent biodegradability, biocompatibility, and nonpoisonous nature. These natural polymers are typically sourced from renewable materials or from manufacturing processes, contributing collaboratively to waste management and demonstrating the potential for enhanced and enduring sustainability. In the field of novel bioactive molecule carriers for biotherapeutics, natural polymers are attracting attention due to their inherent properties and adaptable chemical structures. These polymers offer versatile matrices with a range of architectures and mechanical properties, while retaining the bioactivity of incorporated biomolecules. However, conventional polysaccharide-based hydrogels suffer from inadequate mechanical toughness with large swelling properties, which prohibit their efficacy in real-world applications. This review offers insights into the latest advancements in the development of diverse polysaccharide-based hydrogels for biotherapeutic administrations, either standalone or in conjunction with other polymers or drug delivery systems, in the pharmaceutical and biomedical fields.

Formulation and evaluation of n-acetyl cysteine loaded bi-polymeric physically crosslinked hydrogel with antibacterial and antioxidant activity for diabetic wound dressing

Diabetic wounds have become a serious global health concern, with a growing number of patients each year. Diabetic altered wound healing physiology, as well as resulting complications, make therapy difficult. Hence, diabetic wound healing necessitates a multidisciplinary strategy. This study focused on the formulation, statistical optimization, ex vivo, and in vitro evaluation of a diabetic wound healing by n-acetyl cysteine (NAC) loaded hydrogel. The objective of the study is to formulate n-acetyl loaded hydrogel with different ratio (1:1, 1:2, 1:3, 2:1) of sodium alginate and guar gum. The antibacterial and antifungal assessment against the viability of Pseudomonas aeruginosa (P. aeruginosa), Escherichia coli (E. coli), and Staphylococcus aureus (S.aureus) and Candida albicans (C. albicans) was conducted after determining the in vitro drug release profile. The results of the experiment demonstrated that the formulation F3 was an optimal formulation on triplicate measurement with a pH of 6.2 ± 0.168, and a density of 1.026 ± 0.21. In vitro cell line study exhibited F3 has potential role in cell adhesion and proliferation might be beneficial to tissue regeneration and wound healing. The results imply that F3 may be helpful for the quick healing of diabetic wounds by promoting angiogenesis and also by scavenging free oxygen radicals.

Biomedical Application of Enzymatically Crosslinked Injectable Hydrogels

Hydrogels have garnered significant interest in the biomedical field owing to their tissue-like properties and capability to incorporate various fillers. Among these, injectable hydrogels have been highlighted for their unique advantages, especially their minimally invasive administration mode for implantable use. These injectable hydrogels can be utilized in their pristine forms or as composites by integrating them with therapeutic filler materials. Given their primary application in implantable platforms, enzymatically crosslinked injectable hydrogels have been actively explored due to their excellent biocompatibility and easily controllable mechanical properties for the desired use. This review introduces the crosslinking mechanisms of such hydrogels, focusing on those mediated by horseradish peroxidase (HRP), transglutaminase (TG), and tyrosinase. Furthermore, several parameters and their relationships with the intrinsic properties of hydrogels are investigated. Subsequently, the representative biomedical applications of enzymatically crosslinked-injectable hydrogels are presented, including those for wound healing, preventing post-operative adhesion (POA), and hemostasis. Furthermore, hydrogel composites containing filler materials, such as therapeutic cells, proteins, and drugs, are analyzed. In conclusion, we examine the scientific challenges and directions for future developments in the field of enzymatically crosslinked-injectable hydrogels, focusing on material selection, intrinsic properties, and filler integration.

Multifunctional pH-responsive hydrogel dressings based on carboxymethyl chitosan: Synthesis, characterization fostering the wound healing

Antibiotic abuse is increasing the present rate of drug-resistant bacterial wound infections, producing a significant healthcare burden globally. Herein, we prepared a pH-responsive CMCS/PVP/TA (CPT) multifunctional hydrogel dressing by embedding the natural plant extract TA as a nonantibiotic and cross-linking agent in carboxymethyl chitosan (CMCS) and polyvinylpyrrolidone (PVP) to prompt wound healing. The CPT hydrogel demonstrated excellent self-healing, self-adaptive, and adhesion properties to match different wound requirements. Importantly, this hydrogel showed pH sensitivity and exhibited good activity against resistant bacteria and antioxidant activity by releasing TA in case of bacterial infection (alkaline). Furthermore, the CPT hydrogel exhibited coagulant ability and could rapidly stop bleeding within 30 s. The biocompatible hydrogel effectively accelerated wound healing in a full-thickness skin defect model by thickening granulation tissue, increasing collagen deposition, vascular proliferation, and M2-type macrophage polarization. In conclusion, this study demonstrates that multifunctional CPT hydrogel offers a candidate material with potential applications for infected skin wound healing.

From lab to wearables: Innovations in multifunctional hydrogel chemistry for next-generation bioelectronic devices

Functional hydrogels have emerged as foundational materials in diagnostics, therapy, and wearable devices, owing to their high stretchability, flexibility, sensing, and outstanding biocompatibility. Their significance stems from their resemblance to biological tissue and their exceptional versatility in electrical, mechanical, and biofunctional engineering, positioning themselves as a bridge between living organisms and electronic systems, paving the way for the development of highly compatible, efficient, and stable interfaces. These multifaceted capability revolutionizes the essence of hydrogel-based wearable devices, distinguishing them from conventional biomedical devices in real-world practical applications. In this comprehensive review, we first discuss the fundamental chemistry of hydrogels, elucidating their distinct properties and functionalities. Subsequently, we examine the applications of these bioelectronics within the human body, unveiling their transformative potential in diagnostics, therapy, and human-machine interfaces (HMI) in real wearable bioelectronics. This exploration serves as a scientific compass for researchers navigating the interdisciplinary landscape of chemistry, materials science, and bioelectronics.

Engineering injectable hyaluronic acid-based adhesive hydrogels with anchored PRP to pattern the micro-environment to accelerate diabetic wound healing

Diabetic wounds remain a global challenge due to disordered wound healing led by inflammation, infection, oxidative stress, and delayed proliferation. Therefore, an ideal wound dressing for diabetic wounds not only needs tissue adhesiveness, injectability, and self-healing properties but also needs a full regulation of the microenvironment. In this work, adhesive wound dressings (HA-DA/PRP) with injectability were fabricated by combining platelet rich plasma (PRP) and dopamine-modified-hyaluronic acid (HA-DA). The engineered wound dressings exhibited tissue adhesiveness, rapid self-healing, and shape adaptability, thereby enhancing stability and adaptability to irregular wounds. The in vitro experiments demonstrated that HA-DA/PRP adhesives significantly promoted fibroblast proliferation and migration, attributed to the loaded PRP. The adhesives showed antibacterial properties against both gram-positive and negative bacteria. Moreover, in vitro experiments confirmed that HA-DA/PRP adhesives effectively mitigated oxidative stress and inflammation. Finally, HA-DA/PRP accelerated the healing of diabetic wounds by inhibiting bacterial growth, promoting granulation tissue regeneration, accelerating neovascularization, facilitating collagen deposition, and modulating inflammation through inducing M1 to M2 polarization, in an in vivo model of infected diabetic wounds. Overall, HA-DA/PRP adhesives with the ability to comprehensively regulate the microenvironment in diabetic wounds may provide a novel approach to expedite the diabetic wounds healing in clinic.

From electricity to vitality: the emerging use of piezoelectric materials in tissue regeneration

The unique ability of piezoelectric materials to generate electricity spontaneously has attracted widespread interest in the medical field. In addition to the ability to convert mechanical stress into electrical energy, piezoelectric materials offer the advantages of high sensitivity, stability, accuracy and low power consumption. Because of these characteristics, they are widely applied in devices such as sensors, controllers and actuators. However, piezoelectric materials also show great potential for the medical manufacturing of artificial organs and for tissue regeneration and repair applications. For example, the use of piezoelectric materials in cochlear implants, cardiac pacemakers and other equipment may help to restore body function. Moreover, recent studies have shown that electrical signals play key roles in promoting tissue regeneration. In this context, the application of electrical signals generated by piezoelectric materials in processes such as bone healing, nerve regeneration and skin repair has become a prospective strategy. By mimicking the natural bioelectrical environment, piezoelectric materials can stimulate cell proliferation, differentiation and connection, thereby accelerating the process of self-repair in the body. However, many challenges remain to be overcome before these concepts can be applied in clinical practice, including material selection, biocompatibility and equipment design. On the basis of the principle of electrical signal regulation, this article reviews the definition, mechanism of action, classification, preparation and current biomedical applications of piezoelectric materials and discusses opportunities and challenges for their future clinical translation.

Cryogel wound dressings based on natural polysaccharides perfectly adhere to irregular wounds for rapid haemostasis and easy disassembly

Skin injuries can have unexpected surfaces, leading to uneven wound surfaces and inadequate dressing contact with these irregular surfaces. This can decrease the dressing's haemostatic action and increase the healing period. This study recommends the use of sticky and flexible cryogel coverings to promote faster haemostasis and efficiently handle uneven skin wounds. Alginate cryogels have a fast haemostatic effect and shape flexibility due to their macroporous structure. The material demonstrates potent antibacterial characteristics and enhances skin adherence by adding grafted chitosan with gallic acid. In irregular defect wound models, cryogels can cling closely to uneven damage surfaces due to their amorphous nature. Furthermore, their macroporous structure allows for quick haemostasis by quickly absorbing blood and wound exudate. After giving the dressing a thorough rinse, its adhesive strength reduces and it is simple to remove without causing any damage to the wound. Cryogel demonstrated faster haemostasis than gauze in a wound model on a rat tail, indicating that it has considerable potential for use as a wound dressing in the biomedical area.

AgNPs loaded adenine-modified chitosan composite POSS-PEG hybrid hydrogel with enhanced antibacterial and cell proliferation properties for promotion of infected wound healing

Wound healing is a dynamic and complex process, it's urgent to develop new wound dressings with excellent performance to promote wound healing at the different stages. Here, a novel composite hydrogel dressing composed by silver nanoparticles (AgNPs) impregnated adenine-modified chitosan (CS-A) and octafunctionalized polyhedral oligomeric silsesquioxane (POSS) of benzaldehyde-terminated polyethylene glycol (POSS-PEG-CHO) solution was presented to solve the problem of wound infection. Modification of chitosan with adenine, not only can improve the water solubility of chitosan, but also introduce bioactive substances to promote cell proliferation. CS-A and POSS-PEG-CHO were cross-linked by Schiff-base reaction to form the injectable self-healing hydrogel. On this basis, AgNPs were added into the hydrogel, which endows the hydrogel with better antibacterial activity. Moreover, this kind of hydrogel exhibits excellent cell proliferation properties. Studies demonstrated that the hydrogel can significantly accelerate the closure of infected wounds. The histological analysis and immunofluorescence staining demonstrated that the wounds treated with the composite hydrogel exhibited fewer inflammatory cells, more collagen deposition and angiogenesis, faster regeneration of epithelial tissue. Above all, adenine-modified chitosan composite hydrogel with AgNPs loaded was considered as a dressing material with great application potential for promoting the healing of infected wounds.

Smart Hydrogels for Tissue Regeneration

The rapid growth in the portion of the aging population has led to a consequent increase in demand for biomedical hydrogels, together with an assortment of challenges that need to be overcome in this field. Smart hydrogels can autonomously sense and respond to the physiological/pathological changes of the tissue microenvironment and continuously adapt the response according to the dynamic spatiotemporal shifts in conditions. This along with other favorable properties, make smart hydrogels excellent materials for employing toward improving the precision of treatment for age-related diseases. The key factor during the smart hydrogel design is on accurately identifying the characteristics of natural tissues and faithfully replicating the composition, structure, and biological functions of these tissues at the molecular level. Such hydrogels can accurately sense distinct physiological and external factors such as temperature and biologically active molecules, so they may in turn actively and promptly adjust their response, by regulating their own biological effects, thereby promoting damaged tissue repair. This review summarizes the design strategies employed in the creation of smart hydrogels, their response mechanisms, as well as their applications in field of tissue engineering; and concludes by briefly discussing the relevant challenges and future prospects.

A Self-Adaptive and Regenerable Hydrogel Interfacial Evaporator with Adjustable Evaporation Area for Solar Water Purification

Solar-driven interfacial evaporation is a potential water purification solution. Here, a novel regenerable hydrogel interfacial evaporator is designed with tunable water production. Such an evaporator is fabricated by readily mixing hydroxypropyl chitosan (HPCS) and dibenzaldehyde-functional poly(ethylene glycol) (DF-PEG) at ambient conditions. Dynamic Schiff base bonds bestow on the HPCS/DF-PEG hydrogel (HDH) evaporator self-adaptivity and pH responsiveness. The as-prepared HDH is enabled to spontaneously change shape to adapt to different molds, endowing the evaporator with adjustable evaporation area. The water production performance of the intelligent evaporator is first evaluated using tunable evaporation index (TEI, the tunable evaporated water mass per hour), which can be altered from 0 kg h-1 to 3.21 kg h-1 under one sun. Besides, the large-scale evaporator can be expediently fabricated by virtue of the self-adaptivity. Benefiting from the pH responsiveness, the HDH evaporator is successfully regenerated with the removal of organic dye by the liquefaction-dialysis-regeneration operations. Meanwhile, the re-created evaporator maintains the self-adaptive characteristic and almost constant water evaporation rate compared to that of the initial evaporator. Therefore, this distinctive concept provides a facile strategy to develop smart and recyclable solar-driven interfacial evaporators for flexible water purification.

Supramolecular chitin-based hydrogels with self-adapting and fast-degradation properties for enhancing wound healing

Due to the features of high porosity, high water content, and tunable viscoelasticity, hydrogels have attracted numerous attentions in the promotion of wound closure. However, the lack of abilities to adapt the wounds of complex shapes and prevent postoperative adhesion limits their therapeutic outcomes in wound healing. To address the above challenges, the supramolecular chitin-based (SMCT) hydrogels are created via the host-guest pre-assembly strategy of β-cyclodextrin (βCD) and adamantane (Ad). The reversible host-guest crosslinks endow the SMCT hydrogels with highly dynamic networks, which can better accommodate irregularly shaped wounds compared with the covalent chitin-based hydrogels with similar mechanical properties. In addition, the SMCT hydrogels show rapid in vivo degradability (degradation time ≈ 2 days) due to the enzyme-triggered degradability of chitin, which do not need to be removed from the wounds after service and thus avoid the secondary damage to skin during dressing change. Owing to the hydrophobic cavity of βCD, the SMCT hydrogels can facilitate the load and release of curcumin with anti-inflammatory, antibacterial, and antioxidative activities, thereby significantly improving the wound healing efficiency. This work provides valuable guidance to the design of self-adaptive and fast-degradable hydrogels that hold great potential for enhancing the wound healing in skin and other tissues.

A sandwich-like silk fibroin/polysaccharide composite dressing with continual biofluid draining for wound exudate management

Optimal wound healing requires a wet microenvironment without over-hydration. Inspired by capillarity and transpiration, we have developed a sandwich-like fibers/sponge dressing with continuous exudate drainage to maintain appropriate wound moisture. This dressing is prepared by integrating a three-layer structure using the freeze-drying method. Layer I, as the side that contacts with the skin directly, consists of a hydrophobic silk fibroin membrane; Layer II, providing the pumping action, is made of superabsorbent chitosan-konjac glucomannan sponge; Layer III, accelerating evaporation sixfold compared to natural evaporation, is constructed with a graphene oxide soaked hydrophilic cellulose acetate membrane. Animal experiments showed that the composite dressing had superior wound-healing characteristics, with wounds decreasing to 24.8% of their original size compared to 28.5% for the commercial dressing and 43.2% for the control. The enhanced wound healing can be ascribed to the hierarchical porous structure serves as the fluid-driving factor in this effort; the hydrophilicity of a membrane composed of silk fibroin nanofibers is adjustable to regulate fluid-transporting capacity; and the photothermal effect of graphene oxide guarantees exudates that have migrated to the top layer to evaporate continuously. These findings indicate the unidirectional wicking dressing has the potential to become the next generation of clinical dressings.

Gold@mesoporous polydopamine nanoparticles modified self-healing hydrogel for sport-injuring therapy

Sports-related damage is a prevalent issue, which a combination therapy including photothermal irradiation, self-healing dressing and antibacterial treatment is an effective way to rehabilitate it. In the study, a multifunctional hydrogel was developed to meet the requirement. Firstly, mesoporous polydopamine (MPDA) was prepared, where gold nanoparticles (Au NPs) were formed in its mesoporous structure, to construct Au@MPDA NPs with nanosize about 200 nm. Synergetic and efficient photothermal effect was achieved by the combination of the two photothermal agents. The Au@MPDA NPs were then added to modify polyvinyl alcohol-carboxymethyl chitosan-borax (PCB) hydrogel. Via rheological property characterization, cell experiments and antibacterial evaluation, high photothermal efficiency and effective antibacterial activity of Au@MPDA@PCB hydrogel was obtained with the aid of Au@MPDA NPs, together with self-healing property. When treated in motion-related tissue, the modified hydrogel showed excellent adaptive property and photothermal effect in situ. This study is beneficial for developing a novel rehabilitation treatment strategy for sports-related injuries.

A Homochiral Diphenylalanine Analog Based Mechanoresponsive Hydrogel: An Insight Towards Its Wound Healing Efficacy

Deciphering the most promising strategy for the evolution of potential wound-healing therapeutics is one of the greatest challenging affairs to date. The development of peptide-based smart scaffolds with innate antimicrobial, anti-inflammatory, and antioxidant properties is an appealing way out. Aligned to the goal a set of Hydrogelators I-IV were developed utilizing the concept of chiral orchestration in diphenylalanine fragment, such that the most potent construct with all the bench marks namely mechanoresponsiveness, biocompatibility, consistent antimicrobial and antioxidant properties, could be fished out from the design. Interestingly, our in vitro Antifungal and Lipid peroxidation analysis identified the homochiral isomer Boc-δ-Ava-L-Phe-L-Phe-OH (Hydrogelator I), as an ideal candidate for the wound healing experiment, so we proceeded for the in vivo histopathological and antioxidant measurements in Wister rats. Indeed the wound images obtained from the different sets of animals on the 14th day of treatment demonstrated that with increased recovery time, hydrogelator I displayed a significant reduction in the lesion diameter compared to the marketed drug, and negative control. Even the histopathological measurements using H & E staining demonstrated diminished tissue destruction, neutrophil infiltration necrosis, and lymphatic proliferation in the hydrogelators, in comparison to others, backed by in vivo lipid peroxidation data. Overall our investigation certifies hydrogelator I as an effective therapeutic for managing the wound healing complication.

Rapidly in situ forming an injectable Chitosan/PEG hydrogel for intervertebral disc repair

Intervertebral disc (IVD) degeneration occurred with the increasing age or accidents has puzzled peoples in daily life. To seal IVD defect by injectable hydrogels is a promising method for slowing down IVD degeneration. Herein, we reported a rapidly in situ forming injectable chitosan/PEG hydrogel (CSMA-PEGDA-L) through integrating photo-crosslink of methacrylate chitosan (CSMA) with Schiff base reaction between CSMA and aldehyde polyethylene glycol (PEGDA). The CSMA-PEGDA-L possessed a stronger compressive strength than the photo-crosslinked CSMA-L hydrogel and Schiff-base-crosslinked CSMA-PEGDA hydrogel. This chitosan/PEG hydrogel showed low cytotoxicity from incubation experiments of nucleus pulpous cells. When implanted on the punctured IVD of rat's tail, the CSMA-PEGDA-L hydrogel could well retard the progression of IVD degeneration through physical plugging, powerfully proven by radiological and histological evaluations. This work demonstrated the strategy of in situ injectable glue may be a potential solution for prevention of IVD degeneration.

Smart and versatile biomaterials for cutaneous wound healing

The global increase of cutaneous wounds imposes huge health and financial burdens on patients and society. Despite improved wound healing outcomes, conventional wound dressings are far from ideal, owing to the complex healing process. Smart wound dressings, which are sensitive to or interact with changes in wound condition or environment, have been proposed as appealing therapeutic platforms to effectively facilitate wound healing. In this review, the wound healing processes and features of existing biomaterials are firstly introduced, followed by summarizing the mechanisms of smart responsive materials. Afterwards, recent advances and designs in smart and versatile materials of extensive applications for cutaneous wound healing were submarined. Finally, clinical progresses, challenges and future perspectives of the smart wound dressing are discussed. Overall, by mapping the composition and intrinsic structure of smart responsive materials to their individual needs of cutaneous wounds, with particular attention to the responsive mechanisms, this review is promising to advance further progress in designing smart responsive materials for wounds and drive clinical translation.

Hydrophilic chitosan/graphene oxide composite sponge for rapid hemostasis and non-rebleeding removal

Hydrophilic hemostatic sponge plays an important role in trauma bleeding control because of its robust coagulant functions. However, its strong tissue adhesion can easily result in wound tear and rebleeding during removing the sponge. Herein, the design of a hydrophilic anti-adhesive chitosan/graphene oxide composite sponge (CSAG) that possesses stable mechanical strength, rapid liquid absorption and strong intrinsic/extrinsic coagulation stimulations, is reported. For one thing, CSAG exhibits outstanding hemostatic performance, which significantly outperforms two commercial hemostats in two in vivo serious bleeding models. For another, CSAG shows low tissue adhesion; its peeling force is approximately 79.3 % lower than the commercial gauze. Moreover, in the peeling process, CSAG triggers partial detachment of the blood scab, because of the exist of bubbles or cavities at the interface, allowing the CSAG to be easily and safely peeled off from the wound without rebleeding. This study opens new avenues in constructing anti-adhesive trauma hemostatic materials.

Chitosan-Based Self-Healing Hydrogel: From Fabrication to Biomedical Application

Biocompatible self-healing hydrogels are new-generation smart soft materials that hold great promise in biomedical fields. Chitosan-based self-healing hydrogels, mainly prepared via dynamic imine bonds, have attracted broad attention due to their mild preparation conditions, excellent biocompatibility, and self-recovery ability under a physiological environment. In this review, we present a comprehensive overview of the design and fabrication of chitosan-based self-healing hydrogels, and summarize their biomedical applications in tissue regeneration, customized drug delivery, smart biosensors, and three/four dimensional (3D/4D) printing. Finally, we will discuss the challenges and future perspectives for the development of chitosan-based self-healing hydrogels in the biomedical field.

Modern Approaches in Wounds Management

Wound management represents a well-known continuous challenge and concern of the global healthcare systems worldwide. The challenge is on the one hand related to the accurate diagnosis, and on the other hand to establishing an effective treatment plan and choosing appropriate wound care products in order to maximize the healing outcome and minimize the financial cost. The market of wound dressings is a dynamic field which grows and evolves continuously as a result of extensive research on developing versatile formulations with innovative properties. Hydrogels are one of the most attractive wound care products which, in many aspects, are considered ideal for wound treatment and are widely exploited for extension of their advantages in healing process. Smart hydrogels (SHs) offer the opportunities of the modulation physico-chemical properties of hydrogels in response to external stimuli (light, pressure, pH variations, magnetic/electric field, etc.) in order to achieve innovative behavior of their three-dimensional matrix (gel-sol transitions, self-healing and self-adapting abilities, controlled release of drugs). The SHs response to different triggers depends on their composition, cross-linking method, and manufacturing process approach. Both native or functionalized natural and synthetic polymers may be used to develop stimuli-responsive matrices, while the mandatory characteristics of hydrogels (biocompatibility, water permeability, bioadhesion) are preserved. In this review, we briefly present the physiopathology and healing mechanisms of chronic wounds, as well as current therapeutic approaches. The rational of using traditional hydrogels and SHs in wound healing, as well as the current research directions for developing SHs with innovative features, are addressed and discussed along with their limitations and perspectives in industrial-scale manufacturing.

Instantaneous self-healing and strongly adhesive self-adaptive hyaluronic acid-based hydrogel for controlled drug release to promote tendon wound healing

The treatment of tendon injuries is an important healthcare challenge. Irregular wounds, hypocellularity, and prolonged inflammation impede the rate of healing for tendon injuries. To address these problems, a high-tenacity shape-adaptive, mussel-like hydrogel (PH/GMs@bFGF&PDA) was designed and constructed with polyvinyl alcohol (PVA) and hyaluronic acid grafted with phenylboronic acid (BA-HA) by encapsulating polydopamine and gelatin microspheres containing basic fibroblast growth factor (GMs@bFGF). The shape-adaptive PH/GMs@bFGF&PDA hydrogel can quickly adapt to irregular tendon wounds, and the strong adhesion (101.46 ± 10.88 kPa) can keep the hydrogel adhered to the wound at all times. In addition, the high tenacity and self-healing properties allow the hydrogel to move with the tendon without fracture. Additionally, even if fractured, it can quickly self-heal and continue to adhere to the tendon wound, while slowly releasing basic fibroblast growth factor during the inflammatory phase of the tendon repair process, promoting cell proliferation, migration and shortening the inflammatory phase. In acute tendon injury and chronic tendon injury models, PH/GMs@bFGF&PDA significantly alleviated inflammation and promoted collagen I secretion, enhancing wound healing through the synergistic effects of its shape-adaptive and high-adhesion properties.

Evolution of nanostructured skin patches towards multifunctional wearable platforms for biomedical applications

Recent advances in the field of skin patches have promoted the development of wearable and implantable bioelectronics for long-term, continuous healthcare management and targeted therapy. However, the design of electronic skin (e-skin) patches with stretchable components is still challenging and requires an in-depth understanding of the skin-attachable substrate layer, functional biomaterials and advanced self-powered electronics. In this comprehensive review, we present the evolution of skin patches from functional nanostructured materials to multi-functional and stimuli-responsive patches towards flexible substrates and emerging biomaterials for e-skin patches, including the material selection, structure design and promising applications. Stretchable sensors and self-powered e-skin patches are also discussed, ranging from electrical stimulation for clinical procedures to continuous health monitoring and integrated systems for comprehensive healthcare management. Moreover, an integrated energy harvester with bioelectronics enables the fabrication of self-powered electronic skin patches, which can effectively solve the energy supply and overcome the drawbacks induced by bulky battery-driven devices. However, to realize the full potential offered by these advancements, several challenges must be addressed for next-generation e-skin patches. Finally, future opportunities and positive outlooks are presented on the future directions of bioelectronics. It is believed that innovative material design, structure engineering, and in-depth study of fundamental principles can foster the rapid evolution of electronic skin patches, and eventually enable self-powered close-looped bioelectronic systems to benefit mankind.

Engineered Injectable Cell-Laden Chitin/Chitosan Hydrogel with Adhesion and Biodegradability for Calvarial Defect Regeneration

Trade-off of high-strength and dynamic crosslinking of hydrogels remains an enormous challenge. Motivated by the self-healing property of biological tissues, the strategy of combining multiple dynamic bond mechanisms and a polysaccharide network is proposed to fabricate biomimetic hydrogels with sufficient mechanical strength, injectability, biodegradability, and self-healing property for bone reconstruction engineering. Stable acylhydrazone bonds endowed hydrogels with robust mechanical strength (>10 kPa). The integration of dynamic imine bonds and acylhydrazone bonds optimized the reversible characteristic to protect the cell during the injection and mimicked ECM microenvironment for cell differentiation as well as rapid adapting bone defect area. Furthermore, due to the slow enzymatic hydrolysis kinetics of chitosan and the self-healing properties of resulting networks, hydrogels exhibited a satisfactory biodegradation period (>8 weeks) that highly matches with bone regeneration. Additionally, rBMSC-laden hydrogels exhibited splendid osteogenic induction and bone reconstruction without prefabrication scaffolds and incubation, demonstrating tremendous potential for clinical application. This work proposes an efficient strategy for the construction of a low-cost multifunctional hydrogel, making polysaccharide-based hydrogels as the optimal carrier for enabling cellular functions in bone repair.

Multifunctional chitosan/alginate hydrogel incorporated with bioactive glass nanocomposites enabling photothermal and nitric oxide release activities for bacteria-infected wound healing

It is highly desirable to develop novel multifunctional wound dressing materials capable of delivering active molecules capable of resolving bacterial infections and replenishment of appropriate growth factors for bacteria-infected wound healing. Polysaccharides have numerous biomedical benefits and have been widely used to construct biomaterial scaffolds. Herein, multifunctional chitosan/alginate hydrogel decorated with β-cyclodextrin (β-CD) modified polydopamine (PDA)-bioactive glass (BG) nanoparticles (NPs) integrating photothermal performance and nitric-oxide release activities for the treatment of bacterially infected wounds is presented. As the NO precursor N,N'-di-sec-butyl-N,N'-dinitroso-1,4-phenylenediamine (BNN6) encapsulated into the hydrophobic cavity of β-CD on the PDA-coated BG NPs, the resultant NO@CD-PDA/BG NPs, are imparted with the feature of NIR triggered NO release and desired PTT/NO synergetic antibacterial effects. Furthermore, the release of NO, Ca, and Si ions from the NO@CD-PDA/BG NPs, has the benefit of regulating inflammation, promoting fibroblast proliferation, and stimulating angiogenesis. Besides, the chitosan/alginate hydrogel scaffolds provided a suitable microenvironment to accelerate wound healing. By applying the multifunctional chitosan/alginate nanocomposite hydrogel to S. aureus-infected full-thickness skin defect mouse model, the authors demonstrated that chitosan/alginate nanocomposite hydrogel has multiple functions in preventing bacterial infections, accelerating angiogenesis and wound regeneration, indicating promising application in wound healing.

New Smart Bioactive and Biomimetic Chitosan-Based Hydrogels for Wounds Care Management

Wound management represents a continuous challenge for health systems worldwide, considering the growing incidence of wound-related comorbidities, such as diabetes, high blood pressure, obesity, and autoimmune diseases. In this context, hydrogels are considered viable options since they mimic the skin structure and promote autolysis and growth factor synthesis. Unfortunately, hydrogels are associated with several drawbacks, such as low mechanical strength and the potential toxicity of byproducts released after crosslinking reactions. To overcome these aspects, in this study new smart chitosan (CS)-based hydrogels were developed, using oxidized chitosan (oxCS) and hyaluronic acid (oxHA) as nontoxic crosslinkers. Three active product ingredients (APIs) (fusidic acid, allantoin, and coenzyme Q10), with proven biological effects, were considered for inclusion in the 3D polymer matrix. Therefore, six API-CS-oxCS/oxHA hydrogels were obtained. The presence of dynamic imino bonds in the hydrogels' structure, which supports their self-healing and self-adapting properties, was confirmed by spectral methods. The hydrogels were characterized by SEM, swelling degree, pH, and the internal organization of the 3D matrix was studied by rheological behavior. Moreover, the cytotoxicity degree and the antimicrobial effects were also investigated. In conclusion, the developed API-CS-oxCS/oxHA hydrogels have real potential as smart materials in wound management, based on their self-healing and self-adapting properties, as well as on the benefits of APIs.

Fabrication and desired properties of conductive hydrogel dressings for wound healing

Conductive hydrogels are platforms recognized as constituting promising materials for tissue engineering applications. This is because such conductive hydrogels are characterized by the inherent conductivity properties while retaining favorable biocompatibility and mechanical properties. These conductive hydrogels can be particularly useful in enhancing wound healing since their favorable conductivity can promote the transport of essential ions for wound healing via the imposition of a so-called transepithelial potential. Other valuable properties of these conductive hydrogels, such as wound monitoring, stimuli-response etc., are also discussed in this study. Crucially, the properties of conductive hydrogels, such as 3D printability and monitoring properties, suggest the possibility of its use as an alternative wound dressing to traditional dressings such as bandages. This review, therefore, seeks to comprehensively explore the functionality of conductive hydrogels in wound healing, types of conductive hydrogels and their preparation strategies and crucial properties of hydrogels. This review will also assess the limitations of conductive hydrogels and future perspectives, with an emphasis on the development trend for conductive hydrogel uses in wound dressing fabrication for subsequent clinical applications.

Effect of tocopherol conjugation on polycation-mediated siRNA delivery to orthotopic pancreatic tumors

Pancreatic ductal adenocarcinoma (PDAC) is an aggressive form of cancer with a five-year survival rate of around 10 %. CXCR4 and STAT3 display crucial effects on proliferation, metastasis, angiogenesis, and formation of immunosuppressive microenvironment in pancreatic tumors. Here, we have tested the hypothesis that conjugation of α-tocopherol (TOC) to a polycation (PAMD), synthesized from CXCR4-antagonist AMD3100, will improve delivery of therapeutic siRNA to silence STAT3 in PDAC tumors. PAMD-TOC/siSTAT3 nanoparticles showed superior anti-cancer and anti-migration performance compared to the parent PAMD/siSTAT3 nanoparticles in both murine and human PDAC cell lines. The biodistribution of the nanoparticles in orthotropic mouse KPC8060 and human PANC-1 models, indicated that tumor accumulation of PAMD-TOC/siRNA nanoparticles was improved greatly as compared to PAMD/siRNA nanoparticles. This improved cellular uptake, penetration, and tumor accumulation of PAMD-TOC/siSTAT3 nanoparticles, also contributed to the suppression of tumor growth, metastasis and improved survival. Overall, this study presents a prospective treatment strategy for PDAC.

Polysaccharide-based hydrogels: New insights and futuristic prospects in wound healing

Polysaccharides elicit enormous and promising applications due to their extensive obtainability, innocuousness, and biodegradability. Various outstanding features of polysaccharides can be employed to fabricate biomimetic and multifunctional hydrogels as efficient wound dressings. These hydrogels mimic the natural extracellular matrix and also boost the proliferation of cells. Owing to distinctive architectures and abundance of functional groups, polysaccharide-derived hydrogels have exceptional physicochemical properties and unique therapeutic interventions. Hydrogels designed using polysaccharides can effectively safeguard wounds from bacterial attack. This review includes wound physiology and emphasises on numerous polysaccharide-based hydrogels for wound repair applications. Polysaccharide hydrogels for different wound types and diverse therapeutic agents loaded in hydrogels for wound repair with recent patents are portrayed in the current manuscript, debating the potential of fascinating hydrogels for effective wound healing. More research is required to engineer multifaceted advanced polysaccharide hydrogels with tuneable and adjustable properties to attain huge potential in wound healing.

Current Progress and Outlook of Nano-Based Hydrogel Dressings for Wound Healing

Wound dressing is an important tool for wound management. Designing wound dressings by combining various novel materials and drugs to optimize the peri-wound environment and promote wound healing is a novel concept. Hydrogels feature good ductility, high water content, and favorable oxygen transport, which makes them become some of the most promising materials for wound dressings. In addition, nanomaterials exhibit superior biodegradability, biocompatibility, and colloidal stability in wound healing and can play a role in promoting healing through their nanoscale properties or as carriers of other drugs. By combining the advantages of both technologies, several outstanding and efficient wound dressings have been developed. In this paper, we classify nano-based hydrogel dressings into four categories: hydrogel dressings loaded with a nanoantibacterial drug; hydrogel dressings loaded with oxygen-delivering nanomedicines; hydrogel dressings loaded with nanonucleic acid drugs; and hydrogel dressings loaded with other nanodelivered drugs. The design ideas, advantages, and challenges of these nano-based hydrogel wound dressings are reviewed and analyzed. Finally, we envisaged possible future directions for wound dressings in the context of relevant scientific and technological advances, which we hope will inform further research in wound management.

Recent advances in responsive hydrogels for diabetic wound healing

Poor wound healing after diabetes mellitus remains a challenging problem, and its pathophysiological mechanisms have not yet been fully elucidated. Persistent bleeding, disturbed regulation of inflammation, blocked cell proliferation, susceptible infection and impaired tissue remodeling are the main features of diabetic wound healing. Conventional wound dressings, including gauze, films and bandages, have a limited function. They generally act as physical barriers and absorbers of exudates, which fail to meet the requirements of the whol diabetic wound healing process. Wounds in diabetic patients typically heal slowly and are susceptible to infection due to hyperglycemia within the wound bed. Once bacterial cells develop into biofilms, diabetic wounds will exhibit robust drug resistance. Recently, the application of stimuli-responsive hydrogels, also known as "smart hydrogels", for diabetic wound healing has attracted particular attention. The basic feature of this system is its capacities to change mechanical properties, swelling ability, hydrophilicity, permeability of biologically active molecules, etc., in response to various stimuli, including temperature, potential of hydrogen (pH), protease and other biological factors. Smart hydrogels can improve therapeutic efficacy and limit total toxicity according to the characteristics of diabetic wounds. In this review, we summarized the mechanism and application of stimuli-responsive hydrogels for diabetic wound healing. It is hoped that this work will provide some inspiration and suggestions for research in this field.

Glucose and MMP-9 dual-responsive hydrogel with temperature sensitive self-adaptive shape and controlled drug release accelerates diabetic wound healing

Chronic diabetic wounds are an important healthcare challenge. High concentration glucose, high level of matrix metalloproteinase-9 (MMP-9), and long-term inflammation constitute the special wound environment of diabetic wounds. Tissue necrosis aggravates the formation of irregular wounds. All the above factors hinder the healing of chronic diabetic wounds. To solve these issues, a glucose and MMP-9 dual-response temperature-sensitive shape self-adaptive hydrogel (CBP/GMs@Cel&INS) was designed and constructed with polyvinyl alcohol (PVA) and chitosan grafted with phenylboric acid (CS-BA) by encapsulating insulin (INS) and gelatin microspheres containing celecoxib (GMs@Cel). Temperature-sensitive self-adaptive CBP/GMs@Cel&INS provides a new way to balance the fluid-like mobility (self-adapt to deep wounds quickly, approximately 37 °C) and solid-like elasticity (protect wounds against external forces, approximately 25 °C) of self-adaptive hydrogels, while simultaneously releasing insulin and celecoxib on-demand in the environment of high-level glucose and MMP-9. Moreover, CBP/GMs@Cel&INS exhibits remodeling and self-healing properties, enhanced adhesion strength (39.65 ± 6.58 kPa), down-regulates MMP-9, and promotes cell proliferation, migration, and glucose consumption. In diabetic full-thickness skin defect models, CBP/GMs@Cel&INS significantly alleviates inflammation and regulates the local high-level glucose and MMP-9 in the wounds, and promotes wound healing effectively through the synergistic effect of temperature-sensitive shape-adaptive character and the dual-responsive system.

•

The hydrogel with temperature-sensitive adaptive shape can fill irregular wounds.

•

The hydrogel on-demand releases drugs responding to diabetic wound environment.

•

The hydrogel significantly accelerated diabetic wound healing.

Multifunctional GO Hybrid Hydrogel Scaffolds for Wound Healing

Hydrogel dressings have received extensive attention for the skin wound repair, while it is still a challenge to develop a smart hydrogel for adapting the dynamic wound healing process. Herein, we develop a novel graphene oxide (GO) hybrid hydrogel scaffold with adjustable mechanical properties, controllable drug release, and antibacterial behavior for promoting wound healing. The scaffold was prepared by injecting benzaldehyde and cyanoacetate group-functionalized dextran solution containing GO into a collection pool of histidine. As the GO possesses obvious photothermal behavior, the hybrid hydrogel scaffold exhibited an obvious stiffness decrease and effectively promoted cargo release owing to the breaking of the thermosensitive C=C double bond at a high temperature under NIR light. In addition, NIR-assisted photothermal antibacterial performance of the scaffold could be also achieved with the local temperature rising after irradiation. Therefore, it is demonstrated that the GO hybrid hydrogel scaffold with vascular endothelial growth factor (VEGF) encapsulation can achieve the adjustable mechanical properties, photothermal antibacterial, and angiogenesis during the wound healing process. These features indicated that the proposed GO hybrid hydrogel scaffold is potentially valuable for promoting wound healing and other biomedical application.

Multipronged Micelles-Hydrogel for Targeted and Prolonged Drug Delivery in Chronic Wound Infections

Chronic diabetic wounds are a growing threat globally. Many aspects contribute to its deterioration, including bacterial infection, unbalanced microenvironment, dysfunction of cell repair, etc. In this work, we designed a multipronged micelles-hydrogel platform loaded with curcumin and rifampicin (CRMs-hydrogel) for bacteria-infected chronic wound treatment. The curcumin- and rifampicin-loaded micelles (CRMs) exhibited both MMP9-responsive and epidermal growth factor receptor (EGFR)-targeting abilities. On the one hand, drugs could be released from micelles due to responsive disassembly by MMP9, a matrix metalloproteinase overexpressed in a chronic wound environment; on the other hand, CRMs showed specific targeting to EGFR on epithelial cells and fibroblasts and therefore increased intracellular drug delivery. The thermosensitive CRMs-hydrogel could form strong adhesion with the wound area and served as a suitable matrix for sustained release of CRMs directly at the wound bed, with excellent intracellular and extracellular bacterial elimination efficiency and wound healing promotion capability. We found that a single dose of CRMs-hydrogel achieved 99% antibacterial rate at the MRSA-infected diabetic wound, which effectively reduced inflammatory response and promoted the neovascularization and re-epithelialization process, with nearly half reduction of the skin barrier regeneration period. Collectively, our thermosensitive, MMP9-responsive, and targeted micelles-hydrogel nanoplatform is promising for chronic wound treatment.

Alginate hydrogel with enhanced curcumin release through HPβCD assisted host-guest interaction

The underprivileged pharmacodynamic action of curcumin, which arose from its low water solubility and rapid metabolism, restricts its therapeutic performance. In this study, (2-Hydroxy isopropyl)-β-cyclodextrin (HPβCD) as a macrocycle host molecule was employed to enhance the availability and control release of curcumin by forming a host-guest inclusion complex within an in-situ forming alginate hydrogel. The formation of the inclusion complexes of curcumin with a single host molecule was characterized by FTIR, XRD, TGA, SEM, and DLS analyses. The inclusion complex of curcumin and HPβCD (HPβCD-Cur) showed a high encapsulation efficiency of 88.2 %. According to DLS results, aqueous dispersion of HPβCD-Cur exhibited a unimodal histogram after 2 and 7 days with average particles size of 207.5 and 230.6 nm, respectively. This observation could be because of the formation of an inclusion complex that effectively distributed in solution and prevented curcumin agglomeration. The prepared alginate hydrogel containing HPβCD-Cur demonstrated >87 % reduction in colonies of methicillin-resistant Staphylococcus aureus and Pseudomonas aeruginosa, which significantly is higher than that for Alg/Cur (<69 %). The Alg/HPβCD-Cur hydrogel exhibited a high water uptake of 470 % after 2 h, and a curcumin cumulative release of 80 % over 72 h, with proper cytocompatibility. Consequently, it was shown that the HPβCD carrier could act as an apt host molecule that can properly encapsulate curcumin and enhance its release from the Alg/HPβCD-Cur hydrogel.

Hybrid-Based Wound Dressings: Combination of Synthetic and Biopolymers

Most commercialized wound dressings are polymer-based. Synthetic and natural polymers have been utilized widely for the development of wound dressings. However, the use of natural polymers is limited by their poor mechanical properties, resulting in their combination with synthetic polymers and other materials to enhance their mechanical properties. Natural polymers are mostly affordable, biocompatible, and biodegradable with promising antimicrobial activity. They have been further tailored into unique hybrid wound dressings when combined with synthetic polymers and selected biomaterials. Some important features required in an ideal wound dressing include the capability to prevent bacteria invasion, reduce odor, absorb exudates, be comfortable, facilitate easy application and removal as well as frequent changing, prevent further skin tear and irritation when applied or removed, and provide a moist environment and soothing effect, be permeable to gases, etc. The efficacy of polymers in the design of wound dressings cannot be overemphasized. This review article reports the efficacy of wound dressings prepared from a combination of synthetic and natural polymers.

Facile preparation of antibacterial hydrogel with multi-functions based on carboxymethyl chitosan and oligomeric procyanidin

Hydrogel-based antibacterial materials with multi-functions are of great significance for healthcare. Herein, a facile and one-step method was developed to fabricate an injectable hydrogel (named CMCS/OPC hydrogel) based on carboxymethyl chitosan (CMCS) and oligomeric procyanidin (OPC). In this hydrogel system, OPC serves as the dynamic crosslinker to bridge CMCS macromolecules mainly through dynamical hydrogen bonds, which endows this hydrogel with excellent injectable, self-healing, and adhesive abilities. In addition, due to the inherent antibacterial properties of CMCS and OPC, this hydrogel shows excellent antibacterial activity. Therefore, the well-designed CMCS/OPC hydrogel has great prospects as an antibacterial material in the biomedical field.

Thermal shielding performance of self-healing hydrogel in tumor thermal ablation

Thermal ablation therapy is widely used in the surgical treatment of tumors. Clinically, normal saline is generally used as an insulator to protect adjacent tissues from local high-temperature burns caused by thermal ablation. However, the flow of saline causes fluid loss, requiring frequent injections and complex operation, which is easy to lead to complications such as secondary injury and hematoma. Here, a self-healing chitosan-PEG (CP) hydrogel was proposed as a protective medium to challenge the clinical preparations. Compared with saline and non-self-healing hydrogel F127, CP hydrogel exhibited outstanding thermal shielding performance in the thermal ablation of thyroid nodule in a Beagle dog model. The transient plane source (TPS) method is used to measure thermal properties, including thermal conductivity, thermal diffusivity and specific heat capacity. The thermal shielding mechanism and clinical advantages including operability, biodegradability, and biological safety of self-healing hydrogel are then revealed in-depth. Therefore, self-healing hydrogel can achieve much better thermal management in tumor thermal ablation.

Biomimetic Strain-Stiffening in Chitosan Self-Healing Hydrogels

The strain-stiffening and self-healing capabilities of biological tissues enable them to preserve the structures and functions from deformation and damage. However, biodegradable hydrogel materials with both of these biomimetic characteristics have not been explored. Here, a series of strain-stiffened, self-healing hydrogels are developed through dynamic imine crosslinking of semiflexible O-carboxymethyl chitosan (main chain) and flexible dibenzaldehyde-terminated telechelic poly(ethylene glycol) (crosslinker). The biomimetic hydrogels can be reversibly stiffened to resist the deformation and can even recover to their original state after repeated damages. The mechanical properties and stiffening responses of the hydrogels are tailored by varying the component contents (1-3%) and the crosslinker length (4 or 8 kDa). A combinatorial system of in situ coherent small-angle X-ray scattering with rheological testing is developed to investigate the network structures (in sizes 1.5-160 nm) of hydrogels under shear strains and reveals that the strain-stiffening originates from the fibrous chitosan network with poly(ethylene glycol) crosslinking fixation. The biomimetic hydrogels with biocompatibility and biodegradability promote wound healing. The study provides an insight into the nanoscale design of biomimetic strain-stiffening self-healing hydrogels for biomedical applications.

Reversible cross-linking facilitates the formation of critical nucleus in binary polymer blends

Using self-consistent field theory, we study the effect of reversible cross-linking on the nucleation behavior of a binary polymer blend where only one of the components is able to form cross-links. To control the total number of cross-links and their distribution, we introduce a position-dependent cross-linking probability function that is characterized mainly by two parameters, the magnitude and the width. In the weakly cross-linked region, where the product of the magnitude and width, I, is small, the nucleation behavior is classical-like and the profile of the free energy excess is unimodal. In contrast, in the strongly cross-linked region, the profile of the free energy excess becomes bimodal, and the free energy minimum specifies a metastable nucleus. In a certain I, the free energy barrier for the metastable nucleus turns to be negative, which means it becomes more stable. In both cases, the free energy barrier of the critical nucleus is lower than that without cross-linking, indicating that cross-linking always facilitates nucleation although the dynamic behavior may be different when a metastable nucleus is involved during the nucleation process. The free energy analysis demonstrates that the interaction energy rather than the entropy is responsible for the properties of the critical nucleus. Our study provides an easy alternative way for the control of the nucleation behavior and may attract practical interest.