Cu/Cu2O Nanoparticles Supported on a Phenol-Pyridyl COF as a Heterogeneous Catalyst for the Synthesis of Unsymmetrical Diynes via Glaser-Hay Coupling

A suitably fabricated ternary nanocomposite (Cu-CuO@rGO-SiO2) as a sustainable and common heterogeneous catalyst for C-S, C-O and C-N coupling reactions

A hybrid composite based on π-electron rich reduced graphene oxide (rGO) and mesoporous silica (SiO2) was prepared and decorated with copper species to afford a ternary nanocomposite material (Cu-CuO@rGO-SiO2). This copper-based nanocomposite was successfully used as a robust and multi-tasking heterogeneous catalyst for most common cross-coupling reactions (e.g. C-S, C-O and C-N coupling). A broad range of catalytic activities are believed to be originated from the synergism of different co-existing copper species (Cu(0) and CuO) and facile charge transfer from the metal ions towards rGO-SiO2 matrices, as established from XPS and other studies.

A promising and highly sensitive electrochemical platform for the detection of fentanyl and alfentanil in human serum

A novel electrochemical method has been developed, based on a covalent organic framework (COF) and reduced graphene oxide (rGO), to detect fentanyl and alfentanil. COF nanomaterials with chrysanthemum morphology obtained by solvothermal reaction contain rich active sites for electrochemical catalytic reaction, thus improving the detection performance of the designed sensor. Reduced graphene oxide improves the sensor's sensitivity due to enhanced electron transfer. Under optimized experimental conditions, the fabricated electrode presents a linear range of 0.02 to 7.26 μM for alfentanil and 0.1 to 6.54 μM for fentanyl, with detection limits of 6.7 nM and 33 nM, respectively. In addition, the sensor possesses excellent selectivity, outstanding reproducibility, and acceptable stability. The proposed sensor is feasible for the reliable monitoring of fentanyl and alfentanil in human serum samples, with acceptable reliability and high potential in real-world applications. Finally, the electrochemical characteristic fingerprint of fentanyl is investigated by studying the electrochemical behavior of alfentanil and fentanyl on the electrode surface.

An in-situ strategy to construct uracil-conjugated covalent organic frameworks with tunable fluorescence/recognition characteristics for sensitive and selective Mercury(II) detection

Previous researches of covalent organic frameworks (COFs) have shown their potential as fluorescent probes, but the regulation of their optical properties and recognition characteristics still remains a challenge, and most of reports required complicated post-decoration to improve the sensing performance. In this context, we propose a novel in-situ strategy to construct uracil-conjugated COFs and modulate their fluorescence properties for sensitive and selective mercury(II) detection. By using 1,3,6,8-tetrakis(4-formylphenyl)pyrene (TFPPy) and 1,3,6,8-tetrakis(4-aminophenyl)pyrene (TAPPy) as fundamental blocks and 5-aminouraci (5-AU) as the functional monomer, a series of COFs (Py-COFs and Py-U-COFs-1 to Py-U-COFs-5) with tunable fluorescence were solvothermally synthesized through an in-situ Schiff base reaction. The π-conjugated framework serves as a signal reporter, the evenly and densely distributed uracil acts as a mercury(II) receptor, and the regular pores (channels) make the rapid and sensitive detection of the mercury(II) possible. In this research, we manage to regulate the crystalline structure, the fluorescence properties, and the sensing performance of COFs by simply changing the molar ratio of precursors. We expect this research to open up a new strategy for effective and controllable construction of functionalized COFs for environmental analysis.

Copper laser patterning on a flexible substrate using a cost-effective 3D printer

We studied the cost effective direct laser patterning of copper (Cu) on thin polyimide substrates (PI thickness: 12.5-50 µm) using a 405 nm laser module attached to an inexpensive 3D printer. The focal length of the laser was intentionally controlled to reduce defects on patterned Cu and surface damage of PI under predetermined process conditions. The appropriate focal length was examined at various focal distances. Focal distances of - 2.4 mm and 3 mm were found for the shorter focal length (SFL) and longer focal length (LFL), respectively, compared to the actual focal length. This resulted in clean Cu line patterns without line defects. Interestingly, the SFL case had a different Cu growth pattern to that of LFL, indicating that the small difference in the laser incident angle could affect Cu precursor sintering. Cu square patterns had a lower resistivity of 70 μΩ·cm for an LFL after three or four laser scans, while the SFL showed a resistivity below 48 μΩ·cm for a one-time laser scan. The residues of the Cu precursor on PI were easily removed with flowing water and normal surfactants. However, the resistivity of the patterns decreased after cleaning. Among the scan gaps, the Cu square pattern formed at a 70 μm scan gap had the lowest sheet resistance and the least change in resistance from around 4 to 4.4 Ω/ϒ after cleaning. This result implies that the adhesion of the patterned Cu could be improved if the coated Cu precursor was well sintered under the proper process conditions. For the application of this method to bioelectronics, including biosensors, LEDs were connected to the Cu patterns on PI attached to the arm skin and worked well, even when the substrate PI was bent during power connecting.

Linker Engineering of 2D Imine Covalent Organic Frameworks for the Heterogeneous Palladium-Catalyzed Suzuki Coupling Reaction

Covalent organic frameworks (COFs) are an emerging class of porous organic polymers that have been utilized as scaffolds for anchoring metal active species to act as heterogeneous catalysts. Though several examples of such COFs exist, a thorough experimental and computational analysis on such catalysts is limited. In this work, a series of two-dimensional (2D) imine COFs (TTA-DFB COF (N), TTA-TBD COF (N∧O), and TTA-DFP COF(N∧N)) were synthesized by using suitable building units to obtain three different coordination sites (N, N∧O, and N∧N). These were post-modified with Pd(II) to catalyze the Suzuki-Miyaura coupling reaction. Pd@TTA-DFB COF, where Pd(II) was coordinated to N sites, showed the fastest reactivity and lower stability. Pd@TTA-DFP COF showed highest stability but slowest reactivity. Pd@TTA-TBD COF was the best among the three with both high stability and fast reactivity. By combining both experimental and computational results, we conclude that the Pd(II) to Pd(0) reduction is a key step in the difference between the catalytic reactivities of the three COFs. This study demonstrates the importance of the building block approach to design COFs for efficient heterogeneous catalysis and to understand the fate of the reaction profile.

Fluorescence/Colorimetry/Smartphone Triple-Mode Sensing of Dopamine by a COF-Based Peroxidase-Mimic Platform

Simple and accurate monitoring of urinary dopamine (DA) concentration is significant, which is helpful for the assessment or exclusion of catecholamine-producing tumors, such as pheochromocytoma and paraganglioma. Herein, a fluorescence/colorimetry/smartphone triple-mode sensing platform for DA determination was constructed using copper ion (Cu²⁺)-modified hydrazone-linked covalent organic frameworks (Cu-BTA-COF). Cu-BTA-COF with 21.67 wt % copper content exhibited peroxidase-mimic activity. After adding H₂O₂ and 1,3-dihydroxynaphthalene, the Cu-BTA-COF platform can sensitively and selectively detect DA in three modes with consistent results. In fluorescence/colorimetry/smartphone modes, the linear ranges of DA were 1-10, 0.2-40, and 1-10 μM, with related detection limits of 7.2, 8.6, and 23 nM, respectively. Moreover, the Cu-BTA-COF platform can be explored for DA determination in human urine samples with satisfactory recoveries (97.6-100.4%) in all the three modes, suggesting the potential practical application of the Cu-BTA-COF platform for DA detection in urine.

Surface deposition of 2D covalent organic frameworks for minimizing nanocatalyst sintering during hydrogenation

A strategy of in situ depositing 2D COFs on heterogeneous catalysts was reported for the first time to suppress the agglomeration and sintering of the supported metal nanoparticles during hydrogenation processes. The COF-decorated nanocatalysts exhibited excellent stability in various hydrogenation reactions including the reduction of dimethyl oxalate (DMO), furfural, and other chemicals.

Metalated covalent organic frameworks: from synthetic strategies to diverse applications

Covalent organic frameworks (COFs) are a class of organic crystalline porous materials discovered in the early 21st century that have become an attractive class of emerging materials due to their high crystallinity, intrinsic porosity, structural regularity, diverse functionality, design flexibility, and outstanding stability. However, many chemical and physical properties strongly depend on the presence of metal ions in materials for advanced applications, but metal-free COFs do not have these properties and are therefore excluded from such applications. Metalated COFs formed by combining COFs with metal ions, while retaining the advantages of COFs, have additional intriguing properties and applications, and have attracted considerable attention over the past decade. This review presents all aspects of metalated COFs, from synthetic strategies to various applications, in the hope of promoting the continued development of this young field.

2D Microporous Covalent Organic Frameworks as Cobalt Nanoparticle Supports for Electrocatalytic Hydrogen Evolution Reaction

Covalent organic frameworks (COFs) are a new class of porous crystalline polymers, which are considered to be excellent supports for metal nanoparticles (MNPs) due to their highly ordered structure, chemical tunability, and porosity. In this work, two novel ultra-microporous COFs, JUC−624 and JUC−625, with narrow pore size distribution have been synthesized and used for the confined growth of ultrafine Co nanoparticles (CoNPs) with high loading. In an alkaline environment, the produced materials were investigated as electrocatalysts for the hydrogen evolution reaction (HER). Electrochemical test results show that CoNPs@COFs have a Tafel slope of 84 mV·dec−1, an onset overpotential of 105 mV, and ideal stability. Remarkably, CoNPs@JUC−625 required only 146 mV of overpotential to afford a current density of 10 mA cm−2. This research will open up new avenues for making COF-supported ultrafine MNPs with good dispersity and stability for extensive applications.

Nanopores of a Covalent Organic Framework: A Customizable Vessel for Organocatalysis

Covalent organic frameworks (COFs) as crystalline polymers possess ordered nanochannels. When their channels are adorned with catalytically active functional groups, their highly insoluble and fluffy powder texture makes them apt heterogeneous catalysts that can be dispersed in a range of solvents and heated to high temperatures (80-180 °C). This would mean very high catalyst density, facile active-site access, and easy separation leading to high isolated yields. Different approaches have been devised to anchor or disperse the catalytic sites into the nanospaces offered by the COF pores. Such engineered COFs have been investigated as catalysts for many organic transformation reactions. These range from Suzuki-Miyaura coupling, Heck coupling, Knoevenagel condensation, Michael addition, alkene epoxidation, CO₂ utilization, and more complex biomimetic catalysis. Such catalysts employ COF as a "passive" support that merely docks catalytically active inorganic clusters, or in other cases, the COF itself participates as an "active" support by altering the electronics of the inorganic catalytic sites through the redox activity of its framework. Even more, catalytic organic pockets or metal complexes have been directly tethered to COF walls to make them behave like single-site organocatalysts. Here, we have listed most COF-based organic transformations by categorizing them as metal-free non-noble-metal@COF and noble-metal@COF. The initial part of this review highlights the advantages of COFs as a component of a heterogeneous catalyst, while the latter part discusses all of the current literature on this topic.

Copper Coordination and the Induced Morphological Changes in Covalent Organic Frameworks

In this work, we reveal the coordination of copper ions absorbed by a series of covalent organic frameworks. The frameworks were synthesized through the nucleophilic substitution of either cyanuric chloride or phosphonitrilic chloride trimer by 4,4'-bipyridine, and they were utilized as absorbers for the removal of copper ions from aqueous solutions. The exfoliated counterpart of the layered network was compared to the bulk materials in terms of the copper retention capacity and efficiency. The ion absorption capacity of copper ranged from 100 to 290 mg/g depending on the morphology and chemical structure of the framework. As evidenced by the SEM and XRD analysis, the copper absorption induced certain morphological changes in the networks. EPR spectroscopy revealed the key finding of this study: the trigonal bipyramidal configuration of the copper ions in their divalent state, coordinated with the nitrogen of the core units, 4,4'-bipyridine, and chlorine ions. The analysis of the thoroughgoing experiments bridges the gap between coordination molecular chemistry and the field of covalent organic frameworks. EPR explores how the unique trigonal bipyramidal coordination could be suppressed in the end by the environment and, more specifically, by the addition of glycerol to the aqueous dispersions of the covalent organic frameworks.

Porous Organic Polymers Derived from Ferrocene and Tetrahedral Silicon-Centered Monomers for Carbon Dioxide Sorption

Herein, we present two novel ferrocene-containing porous organic polymers, FPOP-1 and FPOP-2, by the Heck reactions of 1,1′-divinylferrocene with two tetrahedral silicon-centered units, i.e., tetrakis(4-bromophenyl)silane and tetrakis(4′-bromo-[1,1′-biphenyl]-4-yl)silane. The resulting materials possess high thermal stability and moderate porosity with the Brunauer–Emmer–Teller (BET) surface areas of 499 m² g⁻¹ (FPOP-1) and 354 m² g⁻¹ (FPOP-2) and total pore volumes of 0.43 cm³ g⁻¹ (FPOP-1) and 0.49 cm³ g⁻¹ (FPOP-2). The porosity is comparable to previously reported ferrocene-containing porous polymers. These materials possess comparable CO₂ capacities of 1.16 mmol g⁻¹ (5.10 wt%) at 273 K and 1.0 bar, and 0.54 mmol g⁻¹ (2.38 wt%) at 298 K and 1.0 bar (FPOP-1). The found capacities are comparable to, or higher than many porous polymers having similar or higher surface areas. They have high isosteric heats of up to 32.9 kJ mol⁻¹, proving that the affinity between the polymer network and CO₂ is high, which can be explained by the presence of ferrocene units in the porous networks. These results indicate that these materials can be promisingly utilized as candidates for the storage or capture of CO₂. More ferrocene-containing porous polymers can be designed and synthesized by combining ferrocene units with various aromatic monomers under this strategy and their applications could be explored.

Porous organic-inorganic hybrid materials for catalysis, energy and environmental applications

Introduction of organic functionalities into the porous inorganic materials make the resulting hybrid porous framework not only more flexible and hydrophobic, but also provide additional scope for further functionalization, which...

Metal–organic framework (MOF)-, covalent-organic framework (COF)-, and porous-organic polymers (POP)-catalyzed selective C–H bond activation and functionalization reactions

The review summarizes the state-of-the-art of C–H active transformations over crystalline and amorphous porous materials as new emerging heterogeneous (photo)catalysts.

Copper nanocatalysts applied in coupling reactions: a mechanistic insight

Copper-based nanocatalysts have seen great interest for use in synthetic applications since the early 20th century, as evidenced by the exponential number of contributions reported (since 2000, more than 48 000 works published out of about 81 300 since 1900; results from SciFinder using "copper nanocatalysts in organic synthesis" as keywords). These huge efforts are mainly based on two key aspects: (i) copper is an Earth-abundant metal with low toxicity, leading to inexpensive and eco-friendly catalytic materials; and (ii) copper can stabilize different oxidation states (0 to +3) for molecular and nanoparticle-based systems, which promotes different types of metal-reagent interactions. This chemical versatility allows different pathways, involving radical or ionic copper-based intermediates. Thus, copper-based nanoparticles have become convenient catalysts, in particular for couplings (both homo- and hetero-couplings), transformations that are involved in a remarkable number of processes affording organic compounds, which find interest in different fields (medicinal chemistry, natural products, drugs, materials, etc.). Clearly, this richness in reactivity makes understanding the mechanisms more complex. The present review focuses on the analysis of reported contributions using monometallic copper-based nanoparticles as catalytic precursors applied in coupling reactions, paying attention to those shedding light on the reaction mechanism.

Ultrafine platinum nanoparticles confined in a covalent organic framework for enhanced enzyme-mimetic and electrocatalytic performances

Uniformly dispersed ultrafine platinum nanoparticles confined in a covalent organic framework (Pt/COF) have been designed and synthesized, which exhibit good catalytic activities in both enzyme-like and electrocatalytic catalysis. Benefiting from the space-confinement effect of pores in the COF matrix, the size of in situ grown Pt nanoparticles is as small as 2.44 nm with a narrow size distribution. Owing to the structure superiority, the Pt/COF catalyst exhibits much better peroxidase/oxidase-like activity than unsupported Pt nanoparticles and a physical mixture of the two components. Based on the inhibition of catalytic oxidation of the peroxidase substrate by Pt/COF, a sensitive colorimetric method is established for tannic acid sensing. Furthermore, the Pt/COF catalyst also exhibits better electrocatalytic activity and stability than commercial Pt/C catalyst towards the methanol oxidation reaction (MOR). This work demonstrates the promising application potential of COF-supported materials in both enzyme-mimetic and electrocatalytic catalysis.

Controlled growth of ultrafine metal nanoparticles mediated by solid supports

As a unique class of nanomaterials with a high surface-area-to-volume ratio and narrow size distribution, ultrafine metal nanoparticles (UMNPs) have shown exciting properties in many applications, particularly in the field of catalysis. Growing UMNPs in situ on solid supports enables precise control of the UMNP size, and the supports can effectively prevent the aggregation of UMNPs and maintain their high catalytic activity. In this review, we summarize the recent research progress in controlled growth of UMNPs using various solid supports and their applications in catalysis.

Covalent Organic Frameworks: Synthesis, Properties and Applications-An Overview

Covalent Organic Frameworks (COFs) are an exciting new class of microporous polymers with unprecedented properties in organic material chemistry. They are generally built from rigid, geometrically defined organic building blocks resulting in robust, covalently bonded crystalline networks that extend in two or three dimensions. By strategically combining monomers with specific structures and properties, synthesized COF materials can be fine-tuned and controlled at the atomic level, with unparalleled precision on intrapore chemical environment; moreover, the unusually high pore accessibility allows for easy post-synthetic pore wall modification after the COF is synthesized. Overall, COFs combine high, permanent porosity and surface area with high thermal and chemical stability, crystallinity and customizability, making them ideal candidates for a myriad of promising new solutions in a vast number of scientific fields, with widely varying applications such as gas adsorption and storage, pollutant removal, degradation and separation, advanced filtration, heterogeneous catalysis, chemical sensing, biomedical applications, energy storage and production and a vast array of optoelectronic solutions. This review attempts to give a brief insight on COF history, the overall strategies and techniques for rational COF synthesis and post-synthetic functionalization, as well as a glance at the exponentially growing field of COF research, summarizing their main properties and introducing the numerous technological and industrial state of the art applications, with noteworthy examples found in the literature.

Covalent organic frameworks: an ideal platform for designing ordered materials and advanced applications

Covalent organic frameworks offer a molecular platform for integrating organic units into periodically ordered yet extended 2D and 3D polymers to create topologically well-defined polygonal lattices and built-in discrete micropores and/or mesopores.

Emerging new-generation hybrids based on covalent organic frameworks for industrial applications

This review highlights the advancement of COF hybrid-based materials for diverse industrial applications.

Highly active ultrafine Pd NPs confined in imine-linked COFs for nitrobenzene hydrogenation

Ultrafine Pd NPs with an average size of 1.8 nm were stabilized on an imine-linked COF. The Pd/COF with electron rich surface properties and a high surface area showed high catalytic activity in the hydrogenation of nitrobenzene.

Luminescent Ratiometric Thermometers Based on a 4f-3d Grafted Covalent Organic Framework to Locally Measure Temperature Gradients During Catalytic Reactions

Covalent Organic Frameworks (COFs), an emerging class of crystalline porous materials, are a new type of support for grafting lanthanide ions (Ln³⁺ ), which can be employed as ratiometric luminescent thermometers. In this work we have shown that COFs co-grafted with lanthanide ions (Eu³⁺ , Tb³⁺ ) and Cu²⁺ (or potentially other d-metals) can synchronously be employed both as a nanothermometer and catalyst during a chemical reaction. The performance of the thermometer could be tuned by changing the grafted d-metal and solvent environment. As a proof of principle, the Glaser coupling reaction was investigated. We show that temperature can be precisely measured during the course of the catalytic reaction using luminescence thermometry. This concept could be potentially easily extended to other catalytic reactions by grafting other d-metal ions on the Ln@COF platform.

The big effect of a small change: formation of CuO nanoparticles instead of covalently bound Cu(ii) over functionalized mesoporous silica and its impact on catalytic efficiency

Two different heterogeneous catalysts, one with Cu(ii) covalently bonded to functionalized mesoporous silica (FMS-Cu(II)) and another with CuO nanoparticles immobilized over the same silica (FMS-CuO-np), have been synthesized by a common route but with a minor alteration in the sequence of addition of reagents. It is interesting to find that by merely changing the order of the addition of reagents Cu(ii) can be incorporated into the framework in two different forms. In one case Cu(ii) binds to the N and O donor centers present in the functionalized material whereas in the other case CuO nanoparticles are generated in situ. The materials have been thoroughly characterized by powder X-ray diffraction, nitrogen adsorption/desorption, transmission electron microscopy, thermal analysis, FT-IR spectroscopy, solid state MAS-NMR spectroscopy and atomic absorption spectrophotometric studies. The synthesized products have been examined for their catalytic efficiencies in the oxidation of olefins, as a model case. Styrene, α-methyl styrene, cyclohexene, trans-stilbene and cyclooctene have been used as substrates in the presence of tert-butyl hydroperoxide as the oxidant in acetonitrile medium under mild conditions. The products of the catalytic reactions have been identified and estimated by gas chromatography and gas chromatography-mass spectrometry. The rate of conversion of the substrates for both the catalysts is high and the selectivity is also good. But from comparative studies, it is found that FMS-CuO-np which contains CuO nanoparticles shows better efficiency than FMS-Cu(II). The catalysts have been recycled for five catalytic cycles without showing much decrease in their catalytic activity.

Tuning the electronic energy level of covalent organic frameworks for crafting high-rate Na-ion battery anode

Crystalline Covalent Organic Frameworks (COFs) possess ordered accessible nano-channels. When these channels are decorated with redox-active functional groups, they can serve as the anode in metal ion batteries (LIB and SIB). Though sodium's superior relative abundance makes it a better choice over lithium, the energetically unfavourable intercalation of the larger sodium ion makes it incompatible with the commercial graphite anodes used in Li-ion batteries. Also, their sluggish movement inside the electrodes restricts the fast sodiation of SIB. Creating an electronic driving force at the electrodes via chemical manipulation can be a versatile approach to overcome this issue. Herein, we present anodes for SIB drawn on three isostructural COFs with nearly the same Highest Occupied Molecular Orbitals (HOMO) levels but with varying Lowest Unoccupied Molecular Orbitals (LUMO) energy levels. This variation in the LUMO levels has been deliberately obtained by the inclusion of electron-deficient centers (phenyl vs. tetrazine vs. bispyridine-tetrazine) substituents into the modules that make up the COF. With the reduction in the cell-potential, the electrons accumulate in the anti-bonding LUMO. Now, these electron-dosed LUMO levels become efficient anodes for attracting the otherwise sluggish sodium ions from the electrolyte. Also, the intrinsic porosity of the COF favors the lodging and diffusion of the Na⁺ ions. Cells made with these COFs achieve a high specific capacity (energy density) and rate performance (rapid charging-discharging), something that is not as easy for Na⁺ compared to the much smaller sized Li⁺. The bispyridine-tetrazine COF with the lowest LUMO energy shows a specific capacity of 340 mA h g^-1 at 1 A g^-1 and 128 mA h g^-1 at a high current density of 15 A g^-1. Only a 24% drop appears on increasing the current density from 0.1 to 1 A g^-1, which is the lowest among all the top-performing COF derived Na-ion battery anodes.

Ultrastable and Highly Catalytically Active N-Heterocyclic-Carbene-Stabilized Gold Nanoparticles in Confined Spaces

Controlling the size and surface functionalization of nanoparticles (NPs) can lead to improved properties and applicability. Herein, we demonstrate the efficiency of the metal-carbene template approach (MCTA) to synthesize highly robust and soluble three-dimensional polyimidazolium cages (PICs) of different sizes, each bearing numerous imidazolium groups, and use these as templates to synthesize and stabilize catalytically active, cavity-hosted, dispersed poly-N-heterocyclic carbene (NHC)-anchored gold NPs. Owing to the stabilization of the NHC ligands and the effective confinement of the cage cavities, the as-prepared poly-NHC-shell-encapsulated AuNPs displayed promising stability towards heat, pH, and chemical regents. Most notably, all the Au@PCCs (PCC=polycarbene cage) exhibited excellent catalytic activities in various chemical reactions, together with high stability and durability.

Facile Fabrication of the Cu-N-C Catalyst with Atomically Dispersed Unsaturated Cu-N2 Active Sites for Highly Efficient and Selective Glaser-Hay Coupling

M-N-C catalysts have attracted considerable attention in the fields of energy storage and conversion as well as catalysis over the past decades. However, the current synthetic strategies for fabricating M-N-C catalysts via high-temperature pyrolysis unavoidably lead to a structural heterogeneity with the presence of a mixture of species including atomically dispersed M-N_x moieties and inorganic metal-containing particles, which not only decreases the atomic utilization but also clouds the accurate understanding of the nature of the catalytically active sites. Herein, we first report a straightforward and cost-effective preparation strategy for fabricating a Cu-N-C catalyst with atomically dispersed and coordinately unsaturated Cu-N₂ moieties on hierarchically N-doped porous carbon (Cu₁/NC-800) without formation of any metal-containing phases. Cu₁/NC-800 exhibits outstanding catalytic performance for Glaser-Hay coupling of terminal alkynes under mild and sustainable conditions, which surpass those of the state-of-the-art catalysts. A broad set of (un)symmetrical aryl-aryl, aryl-alkyl, and alkyl-alkyl 1,3-diynes were selectively synthesized in high yields with good tolerance of various functional groups. More importantly, the Cu₁/NC-800 could be easily reused with good maintenance of the activity and atomic dispersion of Cu in the structure. Experimental results and theoretical calculations reveal that the low N coordination number of single-atom Cu sites in Cu-N₂ exhibit a preferential adsorption to terminal alkyne; meanwhile, the adjacent pyridinic N sites on the carbon matrix facilitate the deprotonation of the adsorbed alkyne to generate the key intermediate Cu^δ-acetylide species, thus synergistically boosting the reaction. Therefore, this work not only provides an alternative facile synthetic strategy for fabricating atomically dispersed M-N-C catalysts but also represents a significant advance for accessing (un)symmetrical 1,3-diynes from Glaser-Hay coupling.

Tuning of cross-Glaser products mediated by substrate-catalyst polymeric backbone interactions

Tuning of cross-Glaser products using different polymeric backbones supported by copper oxide nano-catalysts has been demonstrated by tweaking the substrate-catalyst interactions under greener conditions. Further, highly reactive magnetically separable and recyclable catalyst with scalability is demonstrated.

One-Pot Fabrication of Pd Nanoparticles@Covalent-Organic-Framework-Derived Hollow Polyamine Spheres as a Synergistic Catalyst for Tandem Catalysis

Facile fabrication of nanocatalysts consisting of metal nanoparticles (NPs) anchored on a functional support is highly desirable, yet remains challenging. Covalent organic frameworks (COFs) provide an emerging materials platform for structural control and functional design. Here, a facile one-pot in situ reduction approach is demonstrated for the encapsulation of small Pd NPs into the shell of COF-derived hollow polyamine spheres (Pd@H-PPA). In the one-pot synthetic process, the nucleation and growth of Pd NPs in the cavities of the porous shell take place simultaneously with the reduction of imine linkages to secondary amine groups. Pd@H-PPA shows a significantly enhanced catalytic activity and recyclability in the tandem dehydrogenation of ammonia borane and selective hydrogenation of nitroarenes through an adsorption-activation-reaction mechanism. The strong interactions of the secondary amine linkage with borane and nitroarene molecules afford a positive synergy to promote the catalytic reaction. Moreover, the hierarchical structure of Pd@H-PPA allows the accessibility of active Pd NPs to reactants.

Cu2 O Nanocrystals-Catalyzed Photoredox Sonogashira Coupling of Terminal Alkynes and Arylhalides Enhanced by CO2

Herein the first visible-light-activated Sonogashira C-C coupling reaction at room temperature catalyzed by single-metal heterogeneous Cu₂ O truncated nanocubes (Cu₂ O TNCs) was developed. A wide variety of aryl halides and terminal alkynes worked well in this recyclable heterogeneous photochemical process to form the corresponding Sonogashira C-C coupling products in good yields. Mechanistic control studies indicated that CO₂ enhances the formation of light-absorbing heterogeneous surface-bound Cu^I -phenylacetylide (λ_max =472 nm), which further undergoes single-electron transfer with aryl iodides/bromides to enable Sonogashira C sp 2 -C_sp bond formation. In contrast to literature-reported bimetallic TiO₂ -containing nanoparticles as photocatalyst, this work avoided the need of cocatalysis by TiO₂ . Single-metal Cu^I in Cu₂ O TNCs was solely responsible for the observed C sp 2 -C_sp coupling reactions under CO₂ atmosphere.

Recent Advances in the Application of Nanometal Catalysts for Glaser Coupling

:

Synthesis of symmetrical 1,3-diynes from terminal alkynes through an oxidative process is generally called Glaser coupling. The classic Glaser coupling is catalyzed by copper salts under an atmosphere of molecular oxygen as an oxidant. Over the past years, different metal catalysts and oxidants were successfully used in this atom economical C-C coupling reaction. Moreover, several procedures for the preparation of unsymmetrical 1,3-diynes by coupling two different alkyne substrates have been developed. In this review, we will highlight the usefulness of transition metal nanoparticles as efficient catalysts in homo- and hetero-coupling of alkynes by hoping that it will be beneficial to the development of novel and extremely efficient catalytic systems for this fast-growing and important reaction.

Tuning of the redox potential and catalytic activity of a new Cu(ii) complex byo-iminobenzosemiquinone as an electron-reservoir ligand

The synthesis and characterization of a new Cu(ii) complex, LNIS2Cu^II(L^NIS=o-iminobenzosemiquinone), are reported.