Local Photothermal/Photodynamic Synergistic Therapy by Disrupting Bacterial Membrane To Accelerate Reactive Oxygen Species Permeation and Protein Leakage

A multifunctional trap-capture-kill antibacterial system for enhanced wound healing via modified decellularized mushroom aerogels

Wound infections are prevalent and can result in prolonged healing times. In this study, we referred to the "trap-capture-kill" antibacterial strategy to create a wound dressing (DS/PDA@GO-L) by coupling graphene oxide (GO) with lysine and coating it onto the decellularized mushroom stem (DS) using polydopamine (PDA). The mechanism of action of the bacteria-killing process involves lysine chemotaxis and the siphoning effect of DS aerogel, with the process of killing the bacteria being initiated via near-infrared photothermal treatment. In vitro studies demonstrated that DS/PDA@GO-L exhibited excellent blood and cell compatibility, while in vivo experiments revealed its remarkable efficacy in combating bacterial infections. Specifically, the combination of DS/PDA@GO-L with photothermal therapy led to the elimination of over 95 % of S. aureus, E. coli, and Pseudomonas aeruginosa. Furthermore, the aerogel, when used in conjunction with photothermal therapy, significantly reduced bacterial infection at the wound site and accelerated wound healing. During the wound's proliferative phase, it notably enhanced vascularization and extracellular matrix deposition. Furthermore, immunohistochemical staining revealed that bacterial clearance led to a reduction in pro-inflammatory responses and a decrease in the expression of pro-inflammatory cytokines, thereby restoring the wound's inflammatory environment to a pro-regenerative state. Taken together, the developed DS/PDA@GO-L holds great potential in the field of infected skin wound healing.

Exchange-coupled bi-magnetic nanoparticles enhance magnetothermal/chemodynamic antibacterial therapy of poly-l-lactide scaffold

Bone implant-associated bacterial infection is a common cause of transplant failure. Chemodynamic therapy (CDT) has significant antibacterial efficacy by producing reactive oxygen species (ROS). However, the ROS permeability is restricted by the natural barrier of bacterial biofilms. Herein, a hard-soft magnetic biphasic nanoparticle (CF@MF) was synthesized by in-situ growth of the soft MnFe2O4 shell on the hard CoFe2O4 core. Then, the CF@MF was incorporated into poly-l-lactide powders to prepare porous scaffolds by selective laser sintering. The scaffold exhibited superior magnetothermal conversion efficiency, which was attributed to the interfacial exchange coupling of CF@MF. Importantly, the scaffold effectively dispersed biofilms by magnetothermal therapy (MTT), favoring numerous ROS pre-generated by CDT to enter the interior to kill bacteria. This study provided a synergistic MTT/CDT strategy to eradicate deep bacterial infections in biomedical application.

Silver(I) complexes containing bioactive salicylic acid derivatives: Synthesis, characterization, antibacterial activity, and their underlying mechanism

Recognizing that silver-metallodrugs are a potential source of novel anti-infective therapeutic agents, this work adopts the complexation of biologically active salicylic acid derivatives with inherently antibacterial silver(I) ions as a strategy for developing new antibacterial agents. The synthesized silver(I) complexes were characterized by elemental analysis, spectroscopy, and X-ray diffraction analysis. The crystallographic results indicate that the silver(I) ion in complexes [Ag(imH)2](SalH) (1) and [Ag(imH)2](DiSalH)·H2O (2) only coordinates with the imidazole nitrogen atom, while the 4-aminosalicylic acid in complex [Ag(imH)2(AmSalH)]·H2O (3) additionally coordinate with the silver(I) ion through the amino nitrogen atom. Salicylic acid molecules play an important role in the construction of the three-dimensional network structure through weak interactions. In addition, thermogravimetric analysis, stability, and silver(I) ion release experiments indicate that these complexes have good stability and slow ion release rates. Cell toxicity and antibacterial tests were conducted on selected cell lines and microorganisms using complexes 1-3, and compared with silver(I) salts, organic ligands, and antibiotic. All complexes exhibit better biocompatibility and certain anti-tumor selectivity than silver(I) salts. From the perspective of microbial toxicity, complexes 1-3 all have significant inhibitory effects on three bacteria strains, with complex 1 having the strongest antibacterial activity, exhibiting 4-6 times higher activity against certain strains than AgNO3 and chloramphenicol. Mechanism studies have shown that cell wall perforation and imbalance of intracellular ROS levels may be possible reasons for silver(I) complexes induced bacterial cell death. The biofilm removal experiment further proves the potential use of silver(I) complexes 1-3 in the treatment of bacterial infections.

Heterostructure Nanozyme with Hyperthermia-Amplified Enzyme-Like Activity and Controlled Silver Release for Synergistic Antibacterial Therapy

Heterostructure nanozymes as antibiotic-free antimicrobial agents exhibit great potential for multidrug-resistant (MDR) bacterial strains elimination. However, realization of heterostructure antimicrobials with enhanced interfacial interaction for synergistically amplified antibacterial therapy is still a great challenge. Herein, oxygen-vacancy-enriched glucose modified MoOx (G-MoOx) is exploited as a reducing agent to spontaneously reduce Ag (I) into Ag (0) that in situ grows onto the surface of G-MoOx. The resultant Ag doped G-MoOx (Ag/G-MoOx) heterostructure displays augmenting photothermal effect and NIR-enhanced oxidase-like activity after introducing Ag nanoparticles. What's more, NIR hyperthermia accelerate Ag+ ions release from Ag nanoparticles. Introduction of Ag greatly enhances antimicrobial activities of Ag/G-MoOx against MDR bacteria, especially the hybrid loading with 1 wt% Ag NPs exhibiting antibacterial efficacy up to 99.99% against Methicillin-resistant Staphylococcus aureus (MRSA, 1×106 CFU mL-1).

Microbial dysbiosis in periodontitis and peri-implantitis: pathogenesis, immune responses, and therapeutic

The oral microbiome comprises over 700 distinct species, forming complex biofilms essential for maintaining oral and systemic health. When the microbial homeostasis in the periodontium is disrupted, pathogens within the biofilm can cause periodontitis and peri-implantitis, inducing host immune responses. Understanding the role of microbial communities and the immune mechanisms in oral health and disease is crucial for developing improved preventive, diagnostic and therapeutic strategies. However, many questions remain about how changes in bacterial populations contribute to the development and progression of these conditions. An electronic and manual literature search was conducted using PubMed, Excerpta Medica, Frontiers Reports and the Wiley Online Library databases for relevant articles. Data from these publications were extracted and the overall findings were summarized in a narrative manner. The variations in microbial communities and immune responses of periodontitis and peri-implantitis are explored. Dysbiosis of the subgingival microbiome-characterized by an increase in pathogenic bacteria such as Porphyromonas gingivalis, Tannerella forsythia, and Aggregatibacter actinomycetemcomitans-plays a pivotal role in the initiation and progression of periodontitis. As for peri-implantitis, alterations include a higher abundance of opportunistic pathogens and reduced microbial diversity around implants. Moreover, oral dysbiosis potentially influencing systemic health through immune-mediated pathways. Regional immunity of periodontium involving neutrophils, T helper cells-17, and immune-related cytokines is crucial for maintaining periodontal homeostasis and responding to microbial imbalances. Additionally, the impact of non-mechanical treatments-such as probiotics and laser therapy-on the oral microbiome is discussed, demonstrating their potential in managing microbial dysbiosis. These findings underscore that bacterial dysbiosis is a central factor in the development of periodontitis and peri-implantitis. Maintaining microbial balance is essential for preventing these diseases, and interventions targeting the microbiome could enhance treatment outcomes. Strategies focusing on controlling pathogenic bacteria, modulating immune responses, and promoting tissue regeneration are key to restoring periodontal stability. Further research is needed to clarify the mechanisms underlying the transition from peri-implant mucositis to peri-implantitis and to optimize prevention and treatment approaches, considering the complex interactions between the microbiome and host immunity.

Cu-MoOx-based nanozyme with enhanced peroxidase like activity for quinolone antibiotics detection

The abuse of antibiotics has seriously threatened human health and living environment. Nevertheless, the detection of quinolones is currently mainly performed by high-cost and cumbersome means, such as High-Performance Liquid Chromatography (HPLC). Herein, we reported a novel method based on copper-doped MoOx nanoparticles (Cu-MoOx NPs) with peroxidase-like enhancement activity for the easy preparation, sensitive and rapid visualization of quinolone detection. Cu-MoOx NPs can make the chromogenic substrate 3,3',5,5'-Tetramethylbenzidine (TMB) change from colorless to blue. Moreover, the addition of quantitative quinolone antibiotics can significantly accelerate the TMB oxidation reaction. Based on this phenomenon, a colorimetric method for detecting quinolone antibiotics was established with a good linear relationship ranging from 1 × 10-6 M to 1.3 × 10-4 M, and the detection limit was 0.310 μM for ciprofloxacin (CIP) and 0.520 μM for levofloxacin (LVFX). Furthermore, the mechanism was also explored, and the results showed that the peroxidase-like activity of Cu-MoOx NPs was probably derived from the generated OH, 1O2, oxygen vacancies and partially reduced Cu+, and on the other hand was derived from quinolone antibiotics and nanozymes electrostatic interaction between them.

Chitosan-based hydrogel incorporated with polydopamine and protoporphyrin for photothermal-oxidation sterilization of bacteria-infected wound therapy

Phototherapy has emerged as a potential treatment strategy for bacteria-infected wounds, but the inadequate bacteria-capturing ability and excessive damage to normal tissues from single phototherapy are huge limitations. To solve the issues, herein we report the design of chitosan-based hydrogel with bacteria capturing and combined photothermal/photodynamic sterilization functions. Such hydrogel is prepared by mixing chitosan (CS) as matrix, protoporphyrin (PpIX) as photosensitizer and polydopamine (PDA) as photothermal agent and then chemically cross-linking CS with glutaraldehyde. The resulting CS-PpIX-PDA hydrogel possesses a porous architecture (average pore porosity = 60.9 %), excellent swelling capabilities (swelling ratio = 1855 %) and rheological property (G' > G″). The hydrogel can effectively produce reactive oxygen species (ROS) under 660 nm light irradiation due to the photodynamic effect of PpIX. Owing to the presence of PDA, the hydrogel displays a photoabsorption range between 600 and 1500 nm and can generate maximal temperature of 60 °C within 10 min under 808 nm laser illumination (0.6 W/cm2) through photothermal effect. Besides, under synergetic illumination of 808/660 nm laser, CS-PpIX-PDA hydrogel can induce the death of 99.9999 % of E. coli and 99.99999 % of S. aureus. Importantly, when coated on the wound site, the hydrogel exhibits a remarkable bacteria-trapping ability due to its porous structure and the presence of amino groups on chitosan. Under the excitation of 660/808 nm, the combined photothermal and photodynamic effects can effectively eradicate bacteria. Simultaneously, the hydrogel also demonstrates anti-inflammatory properties and upregulates Heat Shock Protein 90 (HSP90) expression, thereby promoting collagen deposition and facilitating wound healing. Therefore, the study may provide some new insights into the development of multifunctional hydrogel for photothermal-oxidation sterilization of bacteria-infected wound therapy.

Aminopeptidase-Responsive NIR Photosensitizer for Precision Targeting and Eradication of Pseudomonas aeruginosa Biofilms

The emergence of resistance in Pseudomonas aeruginosa represents a significant global health challenge, particularly due to the hurdle of effectively penetrating biofilms with antimicrobials. Moreover, the rise of antibiotic-resistant pathogens has driven the urgent need for developing innovative therapeutic approaches to overcome antibiotic resistance. Antibacterial phototherapy strategies have shown great potential for combating pathogens due to their broad-spectrum antimicrobial activity, spatiotemporal controllability, and relatively low rate of resistance emergence. However, due to the lack of bacterial specificity and penetration, photosensitizers cause considerable damage to mammalian cells and normal tissues and are less effective against bacterial biofilms. Herein, we developed a novel dual-targeting antibacterial strategy to construct a near-infrared photosensitizer, Cy-NEO-Leu. Cy-NEO-Leu showed great bacterial targeting affinity, penetrating and accumulating in biofilms. At the site of infection, it was specifically activated by P. aeruginosa aminopeptidase (PaAP), producing Cy-NEO-NH2, which demonstrated outstanding photothermal (PTT) and photodynamic (PDT) properties, with a photothermal conversion efficiency of up to 70.34%. Both in vitro and in vivo results demonstrated that Cy-NEO-Leu significantly reduced the biofilm biomass and bacterial viability in P. aeruginosa biofilms. Moreover, phototherapy with Cy-NEO-Leu further activated the immune system, enhancing therapeutic efficacy and promoting wound healing. RNA-seq analysis revealed that the antibacterial mechanism of Cy-NEO-Leu-mediated phototherapy involves disruption of the transcriptional and translational processes of P. aeruginosa under laser irradiation. Overall, our results present a promising therapeutic approach against P. aeruginosa biofilms and inspire the development of next-generation antimicrobials.

A Polymeric Vesicle System for Combined Lung Cancer Therapy through Chemotherapy and Vasculature Normalization

Lung cancer remains a great threat to human health despite the rapid development of various therapeutic methods. Chemotherapy continues to be the most commonly employed treatment for lung cancer; however, it often suffers from low drug delivery efficiency and severe side effects. To enhance the therapeutic efficacy of chemotherapy, we developed a novel strategy that integrates tumor vasculature normalization with the co-delivery of therapeutic agents. This strategy employs a diblock polymeric vesicle with a reduction-sensitive linkage. Paclitaxel (PTX) is encapsulated in the bilayer, while an acid-sensitive nitric oxide (NO) precursor, DETA NONOate, and zinc oxide nanoparticles (ZnO NPs) are loaded into the central cavity. The resulting nanosystem, (ZnO,NONO)@Ves-PTX, is designed to release NO under the acidic conditions typical of the tumor microenvironment (TME) and intracellular environment. The released NO in the TME inhibits angiogenesis, thereby facilitating the delivery and distribution of therapeutic agents. Upon internalization by tumor cells, (ZnO,NONO)@Ves-PTX decomposes in response to intracellular glutathione (GSH), releasing the loaded agents. DETA NONOate and ZnO NPs generate NO and Zn2+ ions, respectively, at the intracellular pH, which synergistically inhibit tumor growth alongside PTX. This combined therapeutic approach demonstrated remarkable potential in improving the chemotherapeutic efficacy for lung cancer, offering a promising direction for future cancer treatments.

Polylactic acid-based dressing with oxygen generation and enzyme-like activity for accelerating both light-driven biofilm elimination and wound healing

Background

Photodynamic therapy (PDT) is a widely used therapeutic approach for eradicating bacterial biofilms in infected wound, but its effectiveness is limited by the hypoxic environment within the biofilm. This study aimed to investigate whether the efficiency of photodynamic removing biofilm is improving by providing oxygen (O2), as well as the expression of cytokines involved in infected wound healing.

Methods

Manganese dioxide (MnO2) nanoparticles with catalase-like activity were grown in situ on graphitic phase carbon nitride (g-C3N4, CN) nanosheets to construct an all-in-one CN-MnO2 nanozyme, which was then incorporated into poly-L-lactic acid (PLLA) to prepare CN-MnO2/PLLA wound dressing by electrospinning. Subsequently, the in vitro antibacterial biofilm ratio and antibacterial ratio of CN-MnO2/PLLA wound dressing were examined by spread plate and crystal violet staining under irradiation with 808 nm near-infrared light and 660 nm visible light. Meanwhile, the rat skin injury model was established, and hematoxylin and eosin (H&E), Masson's, tumor necrosis factor-α (TNF-α), Arginase 1 (Arg-1), vascular endothelial growth factor (VEGF) and basic fibroblast growth factor (BFGF) were evaluated in vivo to assess the effect of CN-MnO2/PLLA wound dressing on wound healing.

Results

Biofilm density caused by Staphylococcus aureus and Pseudomonas aeruginosa had elimination rates of 83 and 62%, respectively, when treated with CN-MnO2/PLLA dressing. Additionally, the dressing exhibited high antibacterial efficacy against both bacteria, achieving 99 and 98.7% elimination of Staphylococcus aureus and Pseudomonas aeruginosa, respectively. Furthermore, in vivo experiments showed that the CN-MnO2/PLLA wound dressing achieved complete healing of infected wounds on Day 14, with a wound healing rate of >99% by increasing collagen deposition, expression of anti-inflammatory cytokine Arg-1, vascularization cytokine VEGF, and epithelial cell BFGF, and inhibiting the expression of inflammatory cytokine TNF-α.

Conclusions

The CN-MnO2/PLLA wound dressing exhibited excellent antibacterial properties in vitro and in vivo. In addition, CN-MnO2/PLLA wound dressing accelerated rapid wound healing through an anti-inflammatory, pro-vascular regeneration and skin tissue remodeling mechanism.

Applications of Novel Microscale and Nanoscale Materials for Theranostics: From Design to Clinical Translation

The growing global prevalence of chronic diseases has highlighted the limitations of conventional drug delivery methods, which often suffer from non-specific distribution, systemic toxicity, and poor bioavailability. Microscale and nanoscale materials have emerged as innovative solutions, offering enhanced targeting, controlled release, and the convergence of therapeutic and diagnostic functions, referred to as theranostics. This review explores the design principles, mechanisms of action, and clinical applications of various novel micro- and nanomaterials in diseases such as cancer, cardiovascular disorders, and infectious diseases. These materials enable real-time monitoring of therapeutic responses and facilitate precision medicine approaches. Additionally, this paper addresses the significant challenges hindering clinical translation, including biocompatibility, potential toxicity, and regulatory issues. Ongoing clinical trials demonstrate the potential of nanomaterials in theranostic applications, but further research is needed to overcome the barriers to widespread clinical adoption. This work aims to contribute to the acceleration of integrating nanomedicine into clinical practice, ultimately enhancing the efficacy and safety of therapeutic interventions.

Progress and challenges in bacterial infection theranostics based on functional metal nanoparticles

The rapid proliferation and infection of bacteria, especially multidrug-resistant bacteria, have become a great threat to global public health. Focusing on the emergence of "super drug-resistant bacteria" caused by the abuse of antibiotics and the insufficient and delayed early diagnosis of bacterial diseases, it is of great research significance to develop new technologies and methods for early targeted detection and treatment of bacterial infection. The exceptional effects of metal nanoparticles based on their unique physical and chemical properties make such systems ideal for the detection and treatment of bacterial infection both in vitro and in vivo. Metal nanoparticles also have admirable clinical application prospects due to their broad antibacterial spectrum, various antibacterial mechanisms and excellent biocompatibility. Herein, we summarized the research progress concerning the mechanism of metal nanoparticles in terms of antibacterial activity together with the detection of bacterial. Representative achievements are selected to illustrate the proof-of-concept in vitro and in vivo applications. Based on these observations, we also give a brief discussion on the current problems and perspective outlook of metal nanoparticles in the diagnosis and treatment of bacterial infection.

Recent progress in hydrogels combined with phototherapy for bacterial infection: A review

Phototherapy has become one of the most effective antibacterial methods due to its associated lack of drug resistance and its good antibacterial effect. For the purpose of avoiding the aggregation and premature release of photosensitive/photothermal agents during phototherapy, they can be mixed into three-dimensional hydrogels. The combination of hydrogels and phototherapy combines the merits of both hydrogels and phototherapy, overcomes the disadvantages of traditional antibacterial methodologies, and has broad application prospects. This review presents recent advancements in phototherapeutic antibacterial hydrogels including photodynamic antibacterial hydrogels, photothermal antibacterial hydrogels, photodynamic and photothermal synergistic antibacterial hydrogels, and other synergistic antibacterial hydrogels involving phototherapy.

Vanillic Acid Nanocomposite: Synthesis, Characterization Analysis, Antimicrobial, and Anticancer Potentials

Recently, nanoparticles have received considerable attention owing to their efficiency in overcoming the limitations of traditional chemotherapeutic drugs. In our study, we synthesized a vanillic acid nanocomposite using both chitosan and silver nanoparticles, tested its efficacy against lung cancer cells, and analyzed its antimicrobial effects. We used several characterization techniques such as ultraviolet-visible spectroscopy (UV-Vis), field emission scanning electron microscopy (FESEM), energy-dispersive X-ray spectroscopy (EDAX), thermogravimetric analysis (TGA), and differential scanning calorimetry (DSC) to determine the stability, morphological characteristics, and properties of the biosynthesized vanillic acid nanocomposites. Furthermore, the vanillic acid nanocomposites were tested for their antimicrobial effects against Escherichia coli and Staphylococcus aureus, and Candida albicans. The data showed that the nanocomposite effectively inhibited microbes, but its efficacy was less than that of the individual silver and chitosan nanoparticles. Moreover, the vanillic acid nanocomposite exhibited anticancer effects by increasing the expression of pro-apoptotic proteins (BAX, Casp3, Casp7, cyt C, and p53) and decreasing the gene expression of Bcl-2. Overall, vanillic acid nanocomposites possess promising potential against microbes, exhibit anticancer effects, and can be effectively used for treating diseases such as cancers and infectious diseases.

Nanomaterial-related hemoglobin-based oxygen carriers, with emphasis on liposome and nano-capsules, for biomedical applications: current status and future perspectives

Oxygen is necessary for life and plays a key pivotal in maintaining normal physiological functions and treat of diseases. Hemoglobin-based oxygen carriers (HBOCs) have been studied and developed as a replacement for red blood cells (RBCs) in oxygen transport due to their similar oxygen-carrying capacities. However, applications of HBOCs are hindered by vasoactivity, oxidative toxicity, and a relatively short circulatory half-life. With advancements in nanotechnology, Hb encapsulation, absorption, bioconjugation, entrapment, and attachment to nanomaterials have been used to prepare nanomaterial-related HBOCs to address these challenges and pend their application in several biomedical and therapeutic contexts. This review focuses on the progress of this class of nanomaterial-related HBOCs in the fields of hemorrhagic shock, ischemic stroke, cancer, and wound healing, and speculates on future research directions. The advancements in nanomaterial-related HBOCs are expected to lead significant breakthroughs in blood substitutes, enabling their widespread use in the treatment of clinical diseases.

Four-in-one multifunctional self-driven photoelectrocatalytic system for water purification: Organics degradation, U(VI) reduction, electricity generation and disinfection against bacteria

This study addresses the energy-intensive nature of conventional wastewater treatment processes and proposes a solution through the development of a green, low-energy, and multifunctional wastewater treatment technology. The research focuses on a multifunctional self-driven photoelectrocatalytic (PEC) system, exploring its four-in-one applications in eliminating organic pollutants, reducing U(VI), generating electrical energy, and disinfecting pathogenic microorganisms. A TiO2-decorated carbon felt (CF@TiO2) cathode is synthesized to enhance interfacial charge transfer, with TiO2 coating improving surface binding sites (edge TiO and adsorbed -OH) for UO22+ adsorption and reduction. The self-driven PEC system, illuminated solely with simulated sunlight, exhibits remarkable efficiency in removing nearly 100 % of uranium within 0.5 h and simultaneously degrading 99.9 % of sulfamethoxazole (SMX) within 1.5 h, all while generating a maximum power output density (Pmax) of approximately 1065 μW·cm-2. The system demonstrates significant anti-interference properties across a wide pH range and coexisting ions. Moreover, 49.4 % of the fixed uranium on the cathode is reduced into U(IV) species, limiting its migration. The self-driven PEC system also excels in detoxifying various toxic organic compounds, including tetracycline, chlortetracycline, and oxytetracycline, and exhibits exceptional sterilization ability by disinfecting nearly 100 % of Escherichia coli within 0.5 h. This work presents an energy-saving, sustainable, and easily recyclable wastewater purification system with four-in-one capabilities, relying solely on sunlight for operation.

Photosensitizer-loaded hydrogels: A new antibacterial dressing

Bacterial wound infection has emerged as a pivotal threat to human health worldwide, and the situation has worsened owing to the gradual increase in antibiotic-resistant bacteria caused by the improper use of antibiotics. To reduce the use of antibiotics and avoid the increase in antibiotic-resistant bacteria, researchers are increasingly paying attention to  photodynamic therapy, which uses light to produce reactive oxygen species to kill bacteria. Treating bacteria-infected wounds by photodynamic therapy requires fixing the photosensitizer (PS) at the wound site and maintaining a certain level of wound humidity. Hydrogels are materials with a high water content and are well suited for fixing PSs at wound sites for antibacterial photodynamic therapy. Therefore, hydrogels are often loaded with PSs for treating bacteria-infected wounds via antibacterial photodynamic therapy. In this review, we systematically summarised the antibacterial mechanisms and applications of PS-loaded hydrogels for treating bacteria-infected wounds via photodynamic therapy. In addition, the recent  studies and the research status progresses of novel antibacterial hydrogels are discussed. Finally, the challenges and future prospects of PS-loaded hydrogels are reviewed.

Study on synergistic mechanism of molybdenum disulfide/sodium carboxymethyl cellulose composite nanofiber mats for photothermal/photodynamic antibacterial treatment

Innovative antibacterial therapies using nanomaterials, such as photothermal (PTT) and photodynamic (PDT) treatments, have been developed for treating wound infections. However, creating secure wound dressings with these therapies faces challenges. The primary focus of this study is to prepare an antibacterial nanofiber dressing that effectively incorporates stable loads of functional nanoparticles and demonstrates an efficient synergistic effect between PTT and PDT. Herein, a composite nanofiber mat was fabricated, integrating spherical molybdenum disulfide (MoS2) nanoparticles. MoS2 was deposited onto polylactic acid (PLA) nanofiber mats using vacuum filtration, which was further stabilized by sodium carboxymethyl cellulose (CMC) adhesion and glutaraldehyde (GA) cross-linking. The composite nanofibers demonstrated synergistic antibacterial effects under NIR light irradiation, and the underlying mechanism was explored. They induce bacterial membrane permeability, protein leakage, and intracellular reactive oxygen species (ROS) elevation, ultimately leading to >95 % antibacterial activity against Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli), which is higher than that of single thermotherapy (almost no antibacterial activity) or ROS therapy (about 80 %). In addition, the composite nanofiber mats exhibited promotion effects on infected wound healing in vivo. This study demonstrates the great prospects of composite nanofiber dressings in clinical treatment of bacterial-infected wounds.

MoOxNWs with mechanical damage - oriented synergistic photothermal / photodynamic therapy for highly effective treating wound infections

Reactive oxygen species (ROS)-based therapy has emerged as a promising antibacterial strategy. However, it faces the limitations of uncontrollable space-time release and excessive lipid peroxidation, which may lead to a series of metabolic disorders and decreased immune function. In this study, mechanical damage by molybdenum oxide nanowires (MoOxNWs) is introduced as a synergistic factor to enhance the photothermal and photodynamic effects for controllable and efficient antibacterial therapy. Through their sharp ends, the nanowires can effectively pierce and damage the bacterial cells, thus facilitating the entry of externally generated ROS into the cells. The ROS are generated via photodynamic effect of the nanowires under a mere 5 min of near-infrared light irradiation. This approach enhances the photothermal (by 27.3 %) and photodynamic properties of ROS generation. MoOxNWs (100 μg·mL-1) achieve sterilisation rates of 97.67 % for extended-spectrum β-lactamase-producing E. coli and 96.34 % for methicillin-resistant Staphylococcus aureus, which are comparable or even exceeding the efficacy of most MoOx-based antibacterial agents. Moreover, they exhibit good biocompatibility and low in vivo toxicity.

Reusable and self-sterilization mask for real-time personal protection based on sunlight-driven photocatalytic reaction

Personal protective masks play critical role in preventing the disease epidemic and resisting pathogenic bacterial infestation. However, large quantities of masks were disposed during COVID-19 epidemic, which caused environmental problem and huge economic burden. Herein, we developed reusable masks with inherent antimicrobial and self-cleaning features under solar irradiation. With spun-bonded nonwoven fabrics (SNF) layer as substrate, copper sulfide@polydopamine nanoparticles are deposited on SNF layer (CuS@PDANPs-SNF), which presents excellent photocatalytic activity. Under solar irradiation, CuS@PDANPs produce abundant of singly linear oxygen (1O2), which inactivates pathogenic bacteria with high efficiency over 99%. Interestingly, CuS@PDANPs-SNF cannot cause high temperature to bring any uncomfortable to the person, which is suitable for human to wear in daily life. Such design effectively protect person from the transmission of viral aerosol. Meanwhile, CuS@PDANPs-SNF masks are reusable and still maintain robust bactericidal ability after washing. The sunlight-mediated self-sterilization at low temperature endows CuS@PDANPs-SNF masks as powerful personal protective equipment for daily protection, which also provides an instructive way for reducing the environmental impact.

Enhanced Antibacterial and Wound Healing Using a Metal-Organic Cluster Inspired by Artificial Photosynthesis

Bacterial infection poses a constant threat to human health. It is crucial to develop cost-effective and multifunctional solutions to combat bacteria. In this study, inspiration has been taken from artificial photosynthesis and a hydrogel containing a photocatalytic metal-organic cluster (MOC) has been creatively formulated for wound healing and antibacterial purposes. Complete photocatalytic cycles have been achieved by combining the oxidative Ti-center and the reductive Cu-center, in which reactive oxygen species (1 O2 and ·OH) have been generated. The MOC has the capability to eliminate Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli) at a concentration of 40 µg mL-1 . In addition, the hydrogel formulation (H-MOC) has been applied to wounds infected with S. aureus, resulting in improved healing efficiency. This work presents an innovative approach to utilizing photocatalytic biomaterials as non-antibiotic medications.

Ultrasonically functionalized chitosan-gallic acid films inactivate Staphylococcus aureus through envelope-disruption under UVA light exposure

The significant threat of foodborne pathogens contamination has continuously promoted the development of efficient antimicrobial food packaging materials. Here, an antimicrobial film was prepared with gallic acid-grafted-chitosan (CS/GA) that obtained by a two-step ultrasound method. The resultant films exhibited good transparency, improved UV barrier performance, and enhanced mechanical strength. Specifically, with the grafting of 1.2 % GA, the UV blocking ability of CS/GA film at 400 nm was significantly increased by 19.7 % and the tensile strength was nearly two times higher than that of CS film. Moreover, the CS/GA films exhibited an inspiring photoactivated bactericidal ability under 400 nm UVA light irradiation that eradicated almost 99.9 % of Staphylococcus aureus (S. aureus) cells within 60 min. To gain more insights into the antibacterial mechanism, the treated S. aureus cells were further investigated by visualizing bacterial ultrastructure and analyzing membrane properties. The results pointed to the peptidoglycan layer as the primary action target when bacteria come into contact with CS/GA films. Afterward, the intracellular oxidative lesions, disrupted bacterial integrity, and disordered membrane functional properties collectively resulted in eventual cell death. The findings revealed the unique peptidoglycan targeting and membrane disruptive mechanisms of CS/GA films, confirming the application values in controlling foodborne pathogens.

Heterogeneity of dispersed species in nickel-loaded carbon-based catalysts for near-infrared photoresponsive synergistic antimicrobial therapy

The development of novel efficient, safe antimicrobial strategies is an urgent need, as the misuse of antibiotics has become a significant threat to human health. Therefore, we have loaded metal Ni with environmentally friendly carbon black as a substrate, with species varying from single atoms to nanoclusters and nanoparticles. The results obtained from the antimicrobial systems and the role of different types of metal species in the photosensitized antimicrobial reactions were compared to better understand the catalytic behavior of different metal entities (single atoms, nanoclusters, and nanoparticles). Furthermore, the antimicrobial mechanisms of these materials were described by physical and chemical characterization, biological experiments, and theoretical calculations. Such systematic studies provide new ideas and prospects for developing more efficient and environmentally friendly antimicrobial materials.

Feathery Tellurium-Selenium Heterostructural Nanoadjuvant for the Synergistic Treatment of Bacterial Infections

Antibacterial nanoagents with well-controlled structures are greatly desired to address the challenges of bacterial infections. In this study, a featherlike tellurium-selenium heterostructural nanoadjuvant (TeSe HNDs) was created. TeSe HNDs produced 1O2 and had high photothermal conversion efficiency when stimulated with 808 nm near-infrared (NIR) light. To create a synergistic treatment system (TeSe-ICG) with better photothermal and photodynamic capabilities, the photosensitizer indocyanine green (ICG) was then added. With a bactericidal rate of more than 99%, the NIR-mediated TeSe-ICG demonstrated an efficient bactericidal action against both Gram-negative bacteria (Escherichia coli) and Gram-positive bacteria (Staphylococcus aureus). In addition, TeSe-ICG was also effective in treating wound infections and could effectively promote wound healing without obvious toxic side effects. In conclusion, TeSe-ICG is expected to be a good candidate for the treatment of bacterial infections.

Powering mesoporous silica nanoparticles into bioactive nanoplatforms for antibacterial therapies: strategies and challenges

Bacterial infection has been a major threat to worldwide human health, in particular with the ever-increasing level of antimicrobial resistance. Given the complex microenvironment of bacterial infections, conventional use of antibiotics typically renders a low efficacy in infection control, thus calling for novel strategies for effective antibacterial therapies. As an excellent candidate for antibiotics delivery, mesoporous silica nanoparticles (MSNs) demonstrate unique physicochemical advantages in antibacterial therapies. Beyond the delivery capability, extensive efforts have been devoted in engineering MSNs to be bioactive to further synergize the therapeutic effect in infection control. In this review, we critically reviewed the essential properties of MSNs that benefit their antibacterial application, followed by a themed summary of strategies in manipulating MSNs into bioactive nanoplatforms for enhanced antibacterial therapies. The chemically functionalized platform, photo-synergized platform, physical antibacterial platform and targeting-directed platform are introduced in details, where the clinical translation challenges of these MSNs-based antibacterial nanoplatforms are briefly discussed afterwards. This review provides critical information of the emerging trend in turning bioinert MSNs into bioactive antibacterial agents, paving the way to inspire and translate novel MSNs-based nanotherapies in combating bacterial infection diseases.

Oriented ascorbic acid onto zeolitic metal-organic framework-8 membrane via microfluidic spinning for biomedical care

Nowadays, the hydrogen dressing and electrostatic spun films widely used on wounds do not facilitate the permeability of the wound area and fail to achieve controlled drug delivery. Therefore, finding a wound dressing with both breathability and targeted drug delivery has remained an unmet challenge. Here, an oriented microstructure membrane with sustained drug release and robust antibacterial performance was constructed through the microfluidic spinning method. The multifunctional oriented membrane was prepared by loading ascorbic acid onto the zeolitic metal-organic framework-8 to develop drug delivery nanomaterial zeolitic metal-organic framework-8 @ascorbic acid (ZIF-8 @AA) and then mixing ZIF-8 @AA with polyvinyl pyrrolidone (PVP) solution via microfluidic technology, which produced an oriented microfiber member. In addition, the spinning parameters, including the fluid content, rotation speed, and flow rate, on microfiber diameter were evaluated. The constructed oriented membrane had bactericidal efficiencies of 82.94% ± 2.79% and 95.96% ± 1.54% against E. coli and S. aureus, respectively. After five days, the membrane still has a sustained release. Moreover, the fabricated membrane also has good biocompatibility and hemocompatibility in vitro. The oriented arrangement strategy provides a promising approach for wound healing materials in targeted drug delivery. Furthermore, this strategy offers a feasible idea for loading active materials into substrates for disease treatment in the biomedical field.

Double-network hydrogel enhanced by SS31-loaded mesoporous polydopamine nanoparticles: Symphonic collaboration of near-infrared photothermal antibacterial effect and mitochondrial maintenance for full-thickness wound healing in diabetes mellitus

Diabetic wound healing has become a serious healthcare challenge. The high-glucose environment leads to persistent bacterial infection and mitochondrial dysfunction, resulting in chronic inflammation, abnormal vascular function, and tissue necrosis. To solve these issues, we developed a double-network hydrogel, constructed with pluronic F127 diacrylate (F127DA) and hyaluronic acid methacrylate (HAMA), and enhanced by SS31-loaded mesoporous polydopamine nanoparticles (MPDA NPs). As components, SS31, a mitochondria-targeted peptide, maintains mitochondrial function, reduces mitochondrial reactive oxygen species (ROS) and thus regulates macrophage polarization, as well as promoting cell proliferation and migration, while MPDA NPs not only scavenge ROS and exert an anti-bacterial effect by photothermal treatment under near-infrared light irradiation, but also control release of SS31 in response to ROS. This F127DA/HAMA-MPDA@SS31 (FH-M@S) hydrogel has characteristics of adhesion, superior biocompatibility and mechanical properties which can adapt to irregular wounds at different body sites and provide sustained release of MPDA@SS31 (M@S) NPs. In addition, in a diabetic rat full thickness skin defect model, the FH-M@S hydrogel promoted macrophage M2 polarization, collagen deposition, neovascularization and wound healing. Therefore, the FH-M@S hydrogel exhibits promising therapeutic potential for skin regeneration.

Amyloid-like protein bridged nano-materials and fabrics for preparing rapid and long lasting antibacterial, UV-resistant and personal thermal management textiles

Textiles with efficient and long-lasting antibacterial properties have attracted significant attention. However, a single antibacterial model is insufficient to with variable environments and achieve higher antibacterial activity. In this study, lysozyme was used as assistant and stabilizer, and the efficient peeling and functional modification of molybdenum disulfide nanosheets were realized by ultrasonic. Additionally, lysozyme in the presence of reducing agents to form amyloid-like phase-transited lysozyme (PTL) and self-assembling on the wool fabric. Finally, the AgNPs are reduced in situ by PTL and anchored onto the fabric. It has been demonstrated that Ag-MoS2/PTL@wool generates ROS under light irradiation, rapidly converts photothermal heat into generate hyperthermia, and promotes the release of Ag+. The aforementioned "four-in-one" approach resulted in bactericidal rates of 99.996 % (4.4 log, P < 0.0005) and 99.998 % (4.7 log, P < 0.0005) for S.aureus and E.coli, respectively. Even after 50 washing cycles, the inactivation rates remained at 99.813 % and 99.792 % for E.coli and S.aureus, respectively. In the absence of sunlight, AgNPs and PTL continue to provide continuous antibacterial activity. This work emphasizes the importance of amyloid protein in the synthesis and application of high-performance nanomaterials and provides a new direction for the safe and effective application of multiple synergistic antibacterial modes for microbial inactivation.

Advances in preparation and application of antibacterial hydrogels

Bacterial infections, especially those caused by drug-resistant bacteria, have seriously threatened human life and health. There is urgent to develop new antibacterial agents to reduce the problem of antibiotics. Biomedical materials with good antimicrobial properties have been widely used in antibacterial applications. Among them, hydrogels have become the focus of research in the field of biomedical materials due to their unique three-dimensional network structure, high hydrophilicity, and good biocompatibility. In this review, the latest research progresses about hydrogels in recent years were summarized, mainly including the preparation methods of hydrogels and their antibacterial applications. According to their different antibacterial mechanisms, several representative antibacterial hydrogels were introduced, such as antibiotics loaded hydrogels, antibiotic-free hydrogels including metal-based hydrogels, antibacterial peptide and antibacterial polymers, stimuli-responsive smart hydrogels, and light-mediated hydrogels. In addition, we also discussed the applications and challenges of antibacterial hydrogels in biomedicine, which are expected to provide new directions and ideas for the application of hydrogels in clinical antibacterial therapy.

Injectable, antibacterial, and oxygen-releasing chitosan-based hydrogel for multimodal healing of bacteria-infected wounds

Bacterial infection is one of the main challenges of wound healing. It imposes financial and healthcare costs. The emergence of antibiotic-resistant bacteria has increased concerns about this challenge, and made finding alternative solutions a crucial aim. We created a new, antibacterial, multifunctional hydrogel with synergistic chemodynamic and photothermal features for wound-healing applications. We fabricated a chitosan (CT)-based hydrogel containing tannic acid (TA), Fe, and MnO2 nanosheets (CT-TA-Fe-MnO2) via a simple method and characterized it. The antibacterial features (resulting from the production of reactive oxygen species within bacterial cells) and healing ability (via anti-inflammatory and hemostatic features) of the hydrogel were confirmed in vitro. In vivo results revealed the effectiveness of the CT-TA-Fe-MnO2 hydrogel in decreasing the hemostatic time, improving anti-inflammatory effects, and promoting wound healing during 14 days by enhancing the deposition and maturation of collagen fibers without affecting the vital organs. The fabricated CT-TA-Fe-MnO2 hydrogel could be a promising candidate with antibacterial and anti-inflammatory activities suitable for wound-healing applications.

Visual Multifunctional Aggregation-Induced Emission-Based Bacterial Cellulose for Killing of Multidrug-Resistant Bacteria

Multidrug-resistant (MDR) bacteria-related wound infections are a thorny issue. It is urgent to develop new antibacterial wound dressings that can not only prevent wounds from MDR bacteria infection but also promote wound healing. Herein, an aggregation-induced emission (AIE) molecule BITT-composited bacterial cellulose (BC) is presented as wound dressings. BC-BITT composites have good transparency, making it easy to monitor the wound healing process through the composite membrane. The BC-BITT composites retain the advantages of biocompatible BC, and display photodynamic and photothermal synergistic antibacterial effects under irradiation of a 660 nm laser. Furthermore, the BC-BITT composites show excellent wound healing performance in a mouse full-thickness skin wound model infected by MDR bacteria, simultaneously with negligible toxicity. This work paves a way for treating clinically troublesome wound infections.

Biofilm Homeostasis Interference Therapy via 1 O2 -Sensitized Hyperthermia and Immune Microenvironment Re-Rousing for Biofilm-Associated Infections Elimination

The recurrence of biofilm-associated infections (BAIs) remains high after implant-associated surgery. Biofilms on the implant surface reportedly shelter bacteria from antibiotics and evade innate immune defenses. Moreover, little is currently known about eliminating residual bacteria that can induce biofilm reinfection. Herein, novel "interference-regulation strategy" based on bovine serum albumin-iridium oxide nanoparticles (BIONPs) as biofilm homeostasis interrupter and immunomodulator via singlet oxygen (¹ O₂ )-sensitized mild hyperthermia for combating BAIs is reported. The catalase-like BIONPs convert abundant H₂ O₂ inside the biofilm-microenvironment (BME) to sufficient oxygen gas (O₂ ), which can efficiently enhance the generation of ¹ O₂ under near-infrared irradiation. The ¹ O₂ -induced biofilm homeostasis disturbance (e.g., sigB, groEL, agr-A, icaD, eDNA) can disrupt the sophisticated defense system of biofilm, further enhancing the sensitivity of biofilms to mild hyperthermia. Moreover, the mild hyperthermia-induced bacterial membrane disintegration results in protein leakage and ¹ O₂ penetration to kill bacteria inside the biofilm. Subsequently, BIONPs-induced immunosuppressive microenvironment re-rousing successfully re-polarizes macrophages to pro-inflammatory M1 phenotype in vivo to devour residual biofilm and prevent biofilm reconstruction. Collectively, this ¹ O₂ -sensitized mild hyperthermia can yield great refractory BAIs treatment via biofilm homeostasis interference, mild-hyperthermia, and immunotherapy, providing a novel and effective anti-biofilm strategy.

Engineering Dynamic Defect of CeIII /CeIV -Based Metal-Organic Framework through Ultrasound-Triggered Au Electron Trapper for Sonodynamic Therapy of Osteomyelitis

Defect engineering is an important way to tune the catalytic properties of metal-organic framework (MOF), yet precise control of defects is difficult to achieve. Herein, a cerium-based MOF (CeTCPP) is decorated with Au nanoparticles. Under ultrasound irradiation, Au nanoparticles can precisely turn 1/3 of the pristine Ce³⁺ nodes into Ce⁴⁺ . With the stable existence of Ce⁴⁺ , the coordination of Ce nodes changed, causing the structural irregularity in CeTCPP-Au, so that the electron-hole recombination is obviously hindered, facilitating the generation of reactive oxygen species. Therefore, under 20 min of ultrasound irradiation, the CeTCPP-Au showed superior antibacterial efficacy of over 99% against Staphylococcus aureus and Escherichia coli with good biocompatibility, which is further used for effective therapy of osteomyelitis. Overall, this work provides a dynamic defect formation strategy of MOF through the electron trapping of Au nanoparticles, which also sheds light on sonodynamic therapy in curing deep-seated lesions.

Trends in Photothermal Nanostructures for Antimicrobial Applications

The rapid development of antimicrobial resistance due to broad antibiotic utilisation in the healthcare and food industries and the non-availability of novel antibiotics represents one of the most critical public health issues worldwide. Current advances in nanotechnology allow new materials to address drug-resistant bacterial infections in specific, focused, and biologically safe ways. The unique physicochemical properties, biocompatibility, and wide range of adaptability of nanomaterials that exhibit photothermal capability can be employed to develop the next generation of photothermally induced controllable hyperthermia as antibacterial nanoplatforms. Here, we review the current state of the art in different functional classes of photothermal antibacterial nanomaterials and strategies to optimise antimicrobial efficiency. The recent achievements and trends in developing photothermally active nanostructures, including plasmonic metals, semiconductors, and carbon-based and organic photothermal polymers, and antibacterial mechanisms of action, including anti-multidrug-resistant bacteria and biofilm removal, will be discussed. Insights into the mechanisms of the photothermal effect and various factors influencing photothermal antimicrobial performance, emphasising the structure-performance relationship, are discussed. We will examine the photothermal agents' functionalisation for specific bacteria, the effects of the near-infrared light irradiation spectrum, and active photothermal materials for multimodal synergistic-based therapies to minimise side effects and maintain low costs. The most relevant applications are presented, such as antibiofilm formation, biofilm penetration or ablation, and nanomaterial-based infected wound therapy. Practical antibacterial applications employing photothermal antimicrobial agents, alone or in synergistic combination with other nanomaterials, are considered. Existing challenges and limitations in photothermal antimicrobial therapy and future perspectives are presented from the structural, functional, safety, and clinical potential points of view.

Precisely Orientating Atomic Array in One-Dimension Tellurium Microneedles Enhances Intrinsic Piezoelectricity for an Efficient Piezo-Catalytic Sterilization

Comprehensively understanding the interdependency between the orientated atomic array and intrinsic piezoelectricity in one-dimension (1D) tellurium (Te) crystals will greatly benefit their practical piezo-catalytic applications. Herein, we successfully synthesized the various 1D Te microneedles by precisely orientating the atomic growth orientation by tuning (100)/(110) planes ratios (Te-0.6, Te-0.3, Te-0.4) to reveal the secrets of piezoelectricity. Explicitly, the theoretical simulations and experimental results have solidly validated that the Te-0.6 microneedle grown along the [110] orientation possesses a stronger asymmetric distribution of Te atoms array causing the enhanced dipole moment and in-plane polarization, which boosts a higher transfer and separation efficiency of the electron and hole pairs and a higher piezoelectric potential under the same stress. Additionally, the orientated atomic array along the [110] has p antibonding states with a higher energy level, resulting in a higher CB potential and a broadened band gap. Meanwhile, it also has a much lower barrier toward the valid adsorption of H₂O and O₂ molecules over other orientations, effectively conducive to the production of reactive oxygen species (ROS) for the efficient piezo-catalytic sterilization. Therefore, this study not only broadens the fundamental perspectives in understanding the intrinsic mechanism of piezoelectricity in 1D Te crystals but also provides a candidate 1D Te microneedle for practical piezo-catalytic applications.

Photothermal Nanomaterials: A Powerful Light-to-Heat Converter

All forms of energy follow the law of conservation of energy, by which they can be neither created nor destroyed. Light-to-heat conversion as a traditional yet constantly evolving means of converting light into thermal energy has been of enduring appeal to researchers and the public. With the continuous development of advanced nanotechnologies, a variety of photothermal nanomaterials have been endowed with excellent light harvesting and photothermal conversion capabilities for exploring fascinating and prospective applications. Herein we review the latest progresses on photothermal nanomaterials, with a focus on their underlying mechanisms as powerful light-to-heat converters. We present an extensive catalogue of nanostructured photothermal materials, including metallic/semiconductor structures, carbon materials, organic polymers, and two-dimensional materials. The proper material selection and rational structural design for improving the photothermal performance are then discussed. We also provide a representative overview of the latest techniques for probing photothermally generated heat at the nanoscale. We finally review the recent significant developments of photothermal applications and give a brief outlook on the current challenges and future directions of photothermal nanomaterials.

AIEgen-Based Nanomaterials for Bacterial Imaging and Antimicrobial Applications: Recent Advances and Perspectives

Microbial infections have always been a thorny problem. Multi-drug resistant (MDR) bacterial infections rendered the antibiotics commonly used in clinical treatment helpless. Nanomaterials based on aggregation-induced emission luminogens (AIEgens) recently made great progress in the fight against microbial infections. As a family of photosensitive antimicrobial materials, AIEgens enable the fluorescent tracing of microorganisms and the production of reactive oxygen (ROS) and/or heat upon light irradiation for photodynamic and photothermal treatments targeting microorganisms. The novel nanomaterials constructed by combining polymers, antibiotics, metal complexes, peptides, and other materials retain the excellent antimicrobial properties of AIEgens while giving other materials excellent properties, further enhancing the antimicrobial effect of the material. This paper reviews the research progress of AIEgen-based nanomaterials in the field of antimicrobial activity, focusing on the materials' preparation and their related antimicrobial strategies. Finally, it concludes with an outlook on some of the problems and challenges still facing the field.

Pyroelectric Janus nanomotors for synergistic electrodynamic-photothermal-antibiotic therapies of bacterial infections

Antibacterial electrotherapy is currently activated by external electric field or self-powered generators, but usually needs complicated power management circuits. Herein, near-infrared illumination (NIR) of pyroelectric nanoparticles (NPs) produces a built-in electric field to address the effectiveness and safety concerns in the antibacterial treatment. Janus tBT@PDA NPs were obtained by capping polydopamine (PDA) on tetragonal BaTiO₃ (tBT) NPs through defining the polymerization time, followed by ciprofloxacin (CIP) loading on the PDA caps to fabricate Janus tBT@PDA-Cip NPs. NIR illumination of PDA caps creates temperature variations on tBT NPs to generate photothermal and pyroelectric effects. Finite element simulation reveals a pyroelectric potential of over 1 V and sufficient reactive oxygen species (ROS) are produced to exhibit pyroelectric dynamic therapy (PEDT). The elevated temperature on one side of the Janus NPs produces thermophoretic force to drive NP motion, which enhances interactions with bacteria and overcomes limitations in the short action distance and lifespan of ROS. The pyroelectric field accelerates CIP release through weakening the π-π stacking and electrostatic interaction with PDA and also interrupts membrane potentials of bacteria to enhance CIP invasion into bacteria. The synergistic antibacterial effect of pyroelectric tBT@PDA-Cip NPs causes the fully recovery of S. aureus-infected skin wounds and regeneration of intact epidermis, blood vessels and hair follicles, while no obvious pathological change or inflammatory lesion is detected in the major organs. Thus, the pyroelectric Janus nanomotors demonstrate synergistic PEDT/photothermal/antibiotic effects to enhance antibacterial efficacy while avoiding the necessity of excessive heat, ROS and antibiotic doses. STATEMENT OF SIGNIFICANCE: Antibacterial treatment is challenged by antibiotics-derived side effects and the evolution of resistant strains. Phototherapy is commonly associated with excessive heat and oxidative stress, and their combinations with other agents are especially encouraged to strengthen antibacterial efficacy while alleviating the associated side effects. Electric field is another activator to generate antibacterial abilities, but usually requires complicated power management and bulk electrodes, making it inconvenient in a biological setup. To address these challenges, we propose a strategy to generate microelectric field on nanoparticles themselves and achieve synergistic electrodynamic-photothermal-antibiotic therapies. The pyroelectric effect weakens interactions between nanoparticles and antibiotics to accelerate drug release, and the built-in pyroelectric field increases membrane fluidity to enhance bacterial uptake of antibiotics.

Dual-light defined in situ oral mucosal lesion therapy through a mode switchable anti-bacterial and anti-inflammatory mucoadhesive hydrogel

Oral mucosal ulcer is the most prevalent oral mucosal lesion, affecting the quality of life. Due to the moist and highly dynamic oral lining, the existing oral mucoadhesives are unable to serially address the challenges of residency, hemorrhage, bacterial infection and inflammatory reaction. Herein, a dual-light defined oral mucoadhesive (ZPTA-G/HMA) was proposed, with a methacrylate gelatin-methacrylate hyaluronic acid (GelMA-HAMA, G/HMA) double network hydrogel as a matrix, tannic acid (TA) as a high content anchor moiety provider for the moist oral mucosa, and polydopamine modified zinc oxide (ZnO@PDA, ZP) as a photocatalytic antibacterial substance. This platform had good adhesive and hemostatic properties both in vitro and in vivo. Under 520 nm green light (GL) irradiation, ZPTA-G/HMA would anchor to the wet mucosa surface by crosslinking and exert broad-spectrum antibacterial ability (even including Candida albicans) by in situ producing reactive oxygen species (ROS). Moreover, under 808 nm near-infrared (NIR) irradiation, the increased release of TA combined with the photothermal effect of ZP endowed ZPTA-G/HMA with enhanced anti-inflammatory and pro-healing performance. Collectively, ZPTA-G/HMA could be switched by light sources to achieve the dual-mode real-time adjustment of in situ anti-bacterial function and controlled anti-inflammation, combined with ideal mucosal residence, thus promising in developing personalized sequential strategies for varied oral mucosal lesions.

Hyaluronic acid encapsulated silver metal organic framework for the construction of a slow-controlled bifunctional nanostructure: Antibacterial and anti-inflammatory in intrauterine adhesion repair

Intrauterine adhesion (IUA) is a common gynecological disease caused by endometrial injury, which might result in abnormal menstruation, miscarriage, and even fetal deaths. Nevertheless, existing treatment strategies such as intrauterine device and uterine cavity balloons only provide a physical barrier, and not circumvent inflammation of endometrial microenvironment and retrograde infection. In this study, a slow-controlled bifunctional nanostructure was developed via encapsulating hyaluronic acid (HA) on surface of silver-metal organic framework (Ag-MOF), and then loaded in poly lactic-co-glycolic acid scaffold to prevent IUA. In therapy, macro-molecule of HA provided anti-inflammatory function by the adjustment of signal transduction pathways of macrophage surface receptors, whereas Ag-MOF inactivated bacteria by destroying bacterial membrane and producing reactive oxygen. Significantly, the coated HA effectively avoided burst release of Ag⁺, thus achieving long-term antibacterial property and good biocompatibility. Antibacterial results showed antibacterial rate of the scaffold reached 87.8 % against staphylococcus aureus. Anti-inflammatory assays showed that the scaffold inhibited the release of inflammatory cytokines and promoted the release of anti-inflammatory cytokines. Moreover, in vitro cell tests revealed that the scaffold effectively inhibited fibroblast growth, indicating its good ability to prevent IUA. Taken together, the scaffold may be a promising candidate for IUA treatment.

Atomically precise Au nanocluster-embedded carrageenan for single near-infrared light-triggered photothermal and photodynamic antibacterial therapy

In this study, we report atomically precise gold nanoclusters-embedded natural polysaccharide carrageenan as a novel hydrogel platform for single near-infrared light-triggered photothermal (PTT) and photodynamic (PDT) antibacterial therapy. Briefly, atomically precise captopril-capped Au nanoclusters (Au₂₅Capt₁₈) prepared by an alkaline NaBH₄ reduction method and then embedded them into the biosafe carrageenan to achieve superior PTT and PDT dual-mode antibacterial effect. In this platform, the embedded Au₂₅Capt₁₈, as simple-component phototherapeutic agents, exhibit superior thermal effects and singlet oxygen generation under a single near-infrared (NIR, 808 nm) light irradiation, which enables rapid elimination of bacteria. Carrageenan endows the hydrogel platform with superior gelation characteristics and wound microenvironmental regulation. The Au₂₅Capt₁₈-embedded hydrogels exhibited good water retention, hemostasis, and breathability, providing a favorable niche environment for promoting wound healing. In vitro experiments confirmed the excellent antibacterial activity of the Au₂₅Capt₁₈ hydrogels against Gram-positive Staphylococcus aureus and Gram-negative Escherichia coli. The antibacterial effect and promoting wound healing function were further validated in a S. aureus-infected wound model. Biosafety evaluation showed that the Au₂₅Capt₁₈ hydrogel has excellent biocompatibility. This PTT/PDT dual-mode therapy offers an alternative strategy for battling bacterial infections without antibiotics. More importantly, this hydrogel is facile to prepare which is helpful for expanding applications.

Fabrication of an inverse opal structure of a hybrid metal-conducting polymer for plasmon-induced hyperthermia applications

This paper describes the effective fabrication of an inverse opal (IO) structure for plasmon-induced hyperthermia applications using silver nanoparticles (AgNPs) doped in a conducting polymer of poly(3,4-ethylene dioxythiophene) (PEDOT). Indium tin oxide (ITO) substrates were firstly modified electrochemically by a layer of the inverse opal structure of PEDOT (IO-PEDOT). These as-prepared electrodes were subsequently used as working electrodes for electrodepositing AgNPs. The presence of plasmonic AgNPs doped inside a polymer network caused the hybrid of IO-PEDOT and AgNPs to generate significantly more heat than thin-film PEDOT, thin-film PEDOT/AgNPs, and IO-PEDOT under 532 nm laser irradiation. This is attributed to the synergistic effect of the large active area inverse opal structure and doped AgNPs, which exhibit more thermal energy and heat faster than the individual component structures. These findings point to a wide range of potential applications for hybrid IO-PEDOT/AgNPs in hyperthermia treatment.

Nanomaterials-Based Wound Dressing for Advanced Management of Infected Wound

The effective prevention and treatment of bacterial infections is imperative to wound repair and the improvement of patient outcomes. In recent years, nanomaterials have been extensively applied in infection control and wound healing due to their special physiochemical and biological properties. Incorporating antibacterial nanomaterials into wound dressing has been associated with improved biosafety and enhanced treatment outcomes compared to naked nanomaterials. In this review, we discuss progress in the application of nanomaterial-based wound dressings for advanced management of infected wounds. Focus is given to antibacterial therapy as well as the all-in-one detection and treatment of bacterial infections. Notably, we highlight progress in the use of nanoparticles with intrinsic antibacterial performances, such as metals and metal oxide nanoparticles that are capable of killing bacteria and reducing the drug-resistance of bacteria through multiple antimicrobial mechanisms. In addition, we discuss nanomaterials that have been proven to be ideal drug carriers for the delivery and release of antimicrobials either in passive or in stimuli-responsive manners. Focus is given to nanomaterials with the ability to kill bacteria based on the photo-triggered heat (photothermal therapy) or ROS (photodynamic therapy), due to their unparalleled advantages in infection control. Moreover, we highlight examples of intelligent nanomaterial-based wound dressings that can detect bacterial infections in-situ while providing timely antibacterial therapy for enhanced management of infected wounds. Finally, we highlight challenges associated with the current nanomaterial-based wound dressings and provide further perspectives for future improvement of wound healing.

Dramatic improvement in the mechanical properties of polydopamine/polyacrylamide hydrogel mediated human amniotic membrane

Human amniotic membrane (hAM) is a promising material for tissue engineering due to several benefits, including desirable biocompatibility, stem cell source, antibacterial activity, etc. However, because of its low elasticity, the clinical application of hAM is severely restricted. To solve this issue, we employed polydopamine/polyacrylamide (PDA/PAM) hydrogels to toughen hAM. The test results indicated that the PDA/PAM hydrogel can enhance the toughness of hAM dramatically due to the formation of abundant chemical bonds and the strong mechanical properties of the hydrogel itself. Compared to pure hAM, the break elongation and tensile strength of PDA/PAM-toughened hAM rose by 154.15 and 492.31%, respectively. And most importantly, the fracture toughness was almost 15 times higher than untreated hAM. In addition, the cytotoxicity of the PDA/PAM-coated hAM was not detected due to the superior biocompatibility of the chemicals used in the study. Treating hAM with adhesive hydrogels to increase its mechanical characteristics will further promote the application of hAM as a tissue engineering material.

Oxyhemoglobin-Based Nanophotosensitizer for Specific and Synergistic Photothermal and Photodynamic Therapies against Porphyromonas gingivalis Oral Infection

Photothermal therapy (PTT) and photodynamic therapy (PDT) are emerging alternative antibacterial approaches. However, due to the lack of selectivity of photosensitizers for pathogenic bacteria, these methods often show more or less different degrees of in vivo toxicity. Moreover, it is difficult for PDT to exert effective antibacterial effects against anaerobic infections due to the oxygen deficiency. As one of the major anaerobic pathogens in oral infections, Porphyromonas gingivalis (P. gingivalis) acquires iron and porphyrin mainly from hemoglobin in the host. Hence, we developed a nanophotosensitizer named as oxyHb@IR820 through stable complexation between oxyhemoglobin and IR820, which is a photosensitizer possessing both PTT and PDT performance, for fighting P. gingivalis oral infection specifically and efficiently. Owing to hydrophobic interaction, oxyHb@IR820 had much stronger photoabsorption at 808 nm than free IR820, and thus exhibited significantly enhanced photothermal conversion efficiency. As an oxygen donor, oxyHb played an important role in enhancing the photodynamic efficiency of oxyHb@IR820. More importantly, oxyHb@IR820 showed efficient and specific uptake in P. gingivalis and exerted synergistic PTT/PDT performance against P. gingivalis and oral infection in golden hamsters. In summary, this study provides an efficient strategy for delivering photosensitizers specifically to P. gingivalis and augmenting antibacterial PDT against anaerobic infections.

Poly(aspartic acid)-based self-healing hydrogel with precise antibacterial ability for rapid infected-wound repairing

The development of wound dressings with antibacterial activities and simultaneous pro-healing functions are always urgent in treating bacterial wound infection. Herein, a novel multifunctional self-healing hydrogel was designed and prepared by crosslinking quaternary ammonium/boronic acid modified poly(aspartic acid) and poly (vinyl alcohol) polymers with targeted peptide MP196- conjugated polydopamine. The formation of this hydrogel not only improves the biocompatibility of quaternary poly(aspartic acid), but also enhances antibacterial efficacy by pH-triggering dissociation under the low pH bacterial microenvironment. Moreover, precise photothermal treatment can be achieved. In vitro study suggested high synergistic antibacterial efficiency(∼100 %) under near-infrared light, significantly higher than a single antibacterial strategy (66.0-82.6 %). In vivo study suggested infected wounds treated with the hydrogel showed an optimal healing rate(92.0 %) after 7 days. The survival rate of the bacteria in the epidermal tissues was reduced to 2.3 %. Besides, the suitable self-healing property of this hydrogel facilitated its application in the diversity of wound shapes. Thus, the novel poly(aspartic acid) hydrogel might be a promising candidate for precise therapy of bacteria-infected wounds.

Microenvironment-Adaptive Nanozyme for Accelerating Drug-Resistant Bacteria-Infected Wound Healing

Reactive oxygen species (ROS) are favorable for antibacterial infection but their overproduction results in serious inflammatory response and aggravates the hypoxic state of the wound tissue, which is detrimental to healing stages of proliferation and remodeling. Here, an atomic-dispersion Fe-doped oxygen-deficient molybdenum oxide MoO_{3- X} (ADFM) bifunctional nanozyme, featuring implanted peroxidase-like and enhanced catalase-like activity, is developed for decomposing H₂ O₂ into strongly oxidizing hydroxyl radicals (•OH) for prevention of bacterial infection and into plentiful O₂ for healing stages. Therein, the introduction of Fe into MoO_{3- X} primarily produces an asymmetric electron density difference by elongating the bond length between metal atoms, synchronously stabilizing adsorption of •OH and weakening the adsorption of O₂ . ADFM also shows unimaginably high aqueous dispersity and pH-adaptive ROS regulation in the wound microenvironment, both of which are favorable for ADFM to fully exert enzyme-like activity for timely antibacterial and efficient wound-healing action. ADFM thus achieves efficient healing of drug-resistant bacteria-infected wounds in vivo, at an ultralow dosage of 30 µg mL^-1 against 10⁶ CFU mL^-1 extended spectrum β-lactamases-producing Escherichia coli, exhibiting a wound-healing efficiency of ≈10 mm² per day, which sets a benchmark among these noble-metal-free nanozyme-based wound-healing agents.