Multifunctional Magnetic Copper Ferrite Nanoparticles as Fenton-like Reaction and Near-Infrared Photothermal Agents for Synergetic Antibacterial Therapy

NH2-MIL-88B@TP-TA@CuS for photothermal catalytic synergistic antibacterial activity

Reactive oxygen species (ROS) provide a promising way to fight bacterial infection and meet the persistent challenge of antibiotic resistance. Nanoenzyme mimics natural enzyme and becomes an effective regulator of ROS level. In this study, NH2-MIL-88B with high specific surface area was selected as the core, and the covalent organic skeleton material TP-TA COF was wrapped by "sequential growth" technology. Subsequently, through the second hydrothermal treatment, the inorganic material CuS with excellent photothermal performance was integrated into the outer layer, and the NH2-MIL-88B@TP-TA@CuSX composite nanoenzyme was synthesized. Different from the traditional nano-enzyme, NH2-MIL-88B@TP-TA@CuSX nano-enzyme still has good catalytic effect under neutral conditions (pH=7). In addition, NH2-MIL-88B@TP-TA@CuSX has good near infrared (NIR) absorption rate and high photothermal conversion efficiency (PTCE is 48.7 %), which can be used for photothermal treatment (PTT) of bacteria. Mild photothermal effect can further enhance the enzyme-like catalytic activity of NH2-MIL-88B@TP-TA@CuSX, so that H2O2 can be more efficiently catalyzed to produce a large number of ROS. The experimental results in vitro show that NH2-MIL-88B@TP-TA@CuSX can effectively kill Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) in the presence of laser irradiation and H2O2.

Stimuli-Responsive NO Delivery Platforms for Bacterial Infection Treatment

The prevalence of drug-resistant bacterial infections has emerged as a grave threat to clinical treatment and global human health, presenting one of the foremost challenges in medical care. Thus, there is an urgent imperative to develop safe and efficacious novel antimicrobial strategies. Nitric oxide (NO) is a recognized endogenous signaling molecule, which plays a pivotal role in numerous pathological processes. Currently, NO has garnered significant interest as an antibacterial agent due to its capability to eradicate bacteria, disrupt biofilms, and facilitate wound healing, all while circumventing the emergence of drug resistance. However, the inherently unstable characteristic of NO therapeutic gas renders the controlled administration of NO gases exceedingly challenging. Hence, in this review, the current challenge of bacterial infection is discussed; then it is briefly elucidated the antibacterial mechanism of NO and comprehensively delineate the recent advancements in stimulus-responsive NO delivery platforms, along with their merits, obstacles, and prospective avenues for clinical application. This review offers guidance for future advancements in NO-medicated anti-infection therapy is hoped.

A review of metallic nanoparticles: present issues and prospects focused on the preparation methods, characterization techniques, and their theranostic applications

Metallic nanoparticles (MNPs) have garnered significant attention due to their ability to improve the therapeutic index of medications by reducing multidrug resistance and effectively delivering therapeutic agents through active targeting. In addition to drug delivery, MNPs have several medical applications, including in vitro and in vivo diagnostics, and they improve the biocompatibility of materials and nutraceuticals. MNPs have several advantages in drug delivery systems and genetic manipulation, such as improved stability and half-life in circulation, passive or active targeting into the desired target selective tissue, and gene manipulation by delivering genetic materials. The main goal of this review is to provide current information on the present issues and prospects of MNPs in drug and gene delivery systems. The current study focused on MNP preparation methods and their characterization by different techniques, their applications to targeted delivery, non-viral vectors in genetic manipulation, and challenges in clinical trial translation.

Antibacterial Hydrogels for Wound Dressing Applications: Current Status, Progress, Challenges, and Trends

Bacterial infection treatment for chronic wounds has posed a major medical threat and challenge. Bacteria at the wounded sites can compete with the immune system and subsequently invade live tissues, leading to more severe tissue damage. Therefore, there is an urgent demand for wound dressings with antibacterial and anti-inflammatory properties. Considering the concept of moist healing, hydrogels with a three-dimensional (3D) network structure are widely used as wound dressings due to their excellent hydrophilicity, water retention properties, and biocompatibility. Developing antibacterial hydrogels for the treatment of infected wounds has been receiving extensive attention recently. This article categorizes antibacterial hydrogels according to their materials and antibacterial modes, and introduces the recent findings and progress regarding their status. More importantly, with the development of emerging technologies, new therapies are utilized to prepare antibacterial hydrogels such as nanoenzymes, photothermal therapy (PTT), photodynamic therapy (PDT), metal-organic frameworks (MOFs), and other external stimuli-responsive methods. Therefore, this review also examines their progress, challenges, and future trends as wound dressings. In the following studies, there will still be a focus on antibacterial hydrogels that have a high performance, multi-functions, and intelligence, especially biocompatibility, a high and long-lasting antibacterial property, responsiveness, and on-demand therapeutic ability.

Biofilm microenvironment-activated multimodal therapy nanoplatform for effective anti-bacterial treatment and wound healing

Antimicrobial drug development faces challenges from bacterial resistance, biofilms, and excessive inflammation. Here, we design an intelligent nanoplatform utilizing mesoporous silica nanoparticles doped with copper ions for loading copper sulfide (DM/Cu2+-CuS). The mesoporous silica doped with tetrasulfide bonds responds to the biofilm microenvironment (BME), releasing Cu2+ions, CuS along with hydrogen sulfide (H2S) gas. The release of hydrogen sulfide within 72 h reached 793.5 µM, significantly higher than that observed with conventional small molecule donors. H2S induces macrophages polarization towards the M2 phenotype, reducing inflammation and synergistically accelerating endothelial cell proliferation and migration with Cu2+ions. In addition, H2S disrupts extracellular DNA within biofilms, synergistically photothermal enhanced peroxidase-like activity of CuS to effectively eradicate biofilms. Remarkably, DM-mediated consumption of endogenous glutathione enhances the anti-biofilm activity of H2S and improves oxygen species (ROS) destruction efficiency. The combination of photothermal therapy (PTT), chemodynamic therapy (CDT), and gas treatment achieves sterilization rates of 99.3 % and 99.6 % against Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli), respectively, in vitro under 808 nm laser irradiation. Additionally, in vivo experiments demonstrate a significant biosafety and antibacterial potential. In summary, the H2S donor developed in this study exhibits enhanced biocompatibility and controlled release properties. By integrating BME-responsive gas therapy with antibacterial ions, PTT and CDT, a synergistic multimodal strategy is proposed to offer new therapeutic approaches for wound healing. STATEMENT OF SIGNIFICANCE: The advanced DMOS/Cu2+-CuS (DMCC) multimodal therapeutic nanoplatform has been developed for the treatment of drug-resistant bacterial wound infections and has exhibited enhanced therapeutic efficacy through the synergistic effects of photothermal therapy, chemodynamic therapy, Cu2+ions, and H2S. The DMCC exhibited exceptional biocompatibility and could release CuS, Cu2+, and H2S in response to elevated concentrations of glutathione within the biofilm microenvironment. H2S effectively disrupted the biofilm structure. Meanwhile, peroxidase activity of CuS combined with GSH-mediated reduction of Cu2+ to Cu+ generated abundant hydroxyl radicals under acidic conditions, leading to efficient eradication of pathogenic bacteria. Furthermore, both H2S and Cu2+ could modulate M2 macrophages polarization and regulate immune microenvironment dynamics. These strategies collectively provided a novel approach for developing antibacterial nanomedical platforms.

Manipulation of protein corona for nanomedicines

Nanomedicines have significantly advanced the development of diagnostic and therapeutic strategies for various diseases, while they still encounter numerous challenges. Upon entry into the human body, nanomedicines interact with biomolecules to form a layer of proteins, which is defined as the protein corona that influences the biological properties of nanomedicines. Traditional approaches have primarily focused on designing stealthy nanomedicines to evade biomolecule adsorption; however, due to the intricacies of the biological environment within body, this method cannot completely prevent biomolecule adsorption. As research on the protein corona progresses, manipulating the protein corona to modulate the in vivo behaviors of nanomedicines has become a research focus. In this review, modern strategies focused on influencing the biological efficacy of nanomedicines in vivo by manipulating protein corona, along with their wide-ranging applications across diverse diseases are critically summarized, highlighted and discussed. Finally, future directions for this important yet challenging research area are also briefly discussed. This article is categorized under: Nanotechnology Approaches to Biology > Nanoscale Systems in Biology Therapeutic Approaches and Drug Discovery > Emerging Technologies Biology-Inspired Nanomaterials > Protein and Virus-Based Structures.

Cu2-xS homojunction coatings empower titanium implants with near-infrared-triggered antibacterial and antifouling properties

For decades, implant-associated infections (IAIs) caused by pathogenic bacteria have been associated with high failure and mortality rates in implantation surgeries, posing a serious threat to global public health. Therefore, developing a functionalized biomaterial coating with anti-fouling and anti-bacterial functions is crucial for alleviating implant infections. Herein, a near-infrared-responsive anti-bacterial and anti-adhesive coating (Ti-PEG-Cu2-xS) constructed on the surface of titanium (Ti) implants is reported. This coating is composed of nano-Cu2-xS with anti-bacterial activity and super-hydrophilic polyethylene glycol (PEG). Under near-infrared irradiation, the nano-catalyst Cu2-xS on the surface of Ti-PEG-Cu2-xS induces bacterial death by catalyzing the production of singlet oxygen (1O2). The Ti-PEG-Cu2-xS coating can effectively prevent bacterial adhesion and biofilm formation. This coating combines the antibacterial mechanisms of "active attack" and "passive defense", which can kill bacteria and inhibit biofilm formation. The results of in vitro and in vivo experiments have shown that Ti-PEG-Cu2-xS exhibits excellent anti-bacterial properties under near-infrared irradiation and can effectively prevent implant-related infections caused by Escherichia coli (E. coli) ATCC 8739 and Staphylococcus aureus (S. aureus). The antibacterial efficiency of Ti-PEG-Cu2-xS coatings against E. coli was 99.96% ± 0.058% and that of S. aureus was 99.66% ± 0.26%, respectively. In addition, the Ti-PEG-Cu2-xS coating has good blood compatibility and excellent bactericidal ability. Therefore, this multifunctional coating combines a non-adhesive surface strategy and a near-infrared phototherapy sterilization method, effectively blocking the initial attachment and proliferation of bacteria on implants via photothermal/photodynamic effects and providing a promising method for preventing bacterium-induced IAIs.

Near-Infrared Light-Triggered NO Nanogenerator for Gas-Enhanced Photodynamic Therapy and Low-Temperature Photothermal Therapy to Eliminate Biofilms

Purpose

Owing to its noninvasive nature, broad-spectrum effectiveness, minimal bacterial resistance, and high efficiency, phototherapy has significant potential for antibiotic-free antibacterial interventions and combating antibacterial biofilms. However, finding effective strategies to mitigate the detrimental effects of excessive temperature and elevated concentrations of reactive oxygen species (ROS) remains a pressing issue that requires immediate attention.

Methods

In this study, we designed a pH-responsive cationic polymer sodium nitroside dihydrate/branched polyethylenimine-indocyanine green@polyethylene glycol (SNP/PEI-ICG@PEG) nanoplatform using the electrostatic adsorption method and Schiff's base reaction. Relevant testing techniques were applied to characterize and analyze SNP/PEI-ICG@PEG, proving the successful synthesis of the nanomaterials. In vivo and in vitro experiments were performed to evaluate the antimicrobial properties of SNP/PEI-ICG@PEG.

Results

The morphology and particle size of SNP/PEI-ICG@PEG were observed via TEM. The zeta potential and UV-visible (UV-vis) results indicated the synthesis of the nanomaterials. The negligible cytotoxicity of up to 1 mg/mL of SNP/PEI-ICG@PEG in the presence or absence of light demonstrated its biosafety. Systematic in vivo and in vitro antimicrobial assays confirmed that SNP/PEI-ICG@PEG had good water solubility and biosafety and could be activated by near-infrared (NIR) light and synergistically treated using four therapeutic modes, photodynamic therapy (PDT), gaseous therapy (GT), mild photothermal therapy (PTT, 46 °C), and cation. Ultimately, the development of Gram-positive (G+) Staphylococcus aureus (S. aureus) and Gram-negative (G-) Escherichia coli (E. coli) were both completely killed in the free state, and the biofilm that had formed was eliminated.

Conclusion

SNP/PEI-ICG@PEG demonstrated remarkable efficacy in achieving controlled multimodal synergistic antibacterial activity and biofilm infection treatment. The nanoplatform thus holds promise for future clinical applications.

A pH-Responsive Polycaprolactone-Copper Peroxide Composite Coating Fabricated via Suspension Flame Spraying for Antimicrobial Applications

In this study, a pH-responsive polycaprolactone (PCL)-copper peroxide (CuO2) composite antibacterial coating was developed by suspension flame spraying. The successful synthesis of CuO2 nanoparticles and fabrication of the PCL-CuO2 composite coatings were confirmed by microstructural and chemical analysis. The composite coatings were structurally homogeneous, with the chemical properties of PCL well maintained. The acidic environment was found to effectively accelerate the dissociation of CuO2, allowing the simultaneous release of Cu2+ and H2O2. Antimicrobial tests clearly revealed the enhanced antibacterial properties of the PCL-CuO2 composite coating against both Escherichia coli and Staphylococcus aureus under acidic conditions, with a bactericidal effect of over 99.99%. This study presents a promising approach for constructing pH-responsive antimicrobial coatings for biomedical applications.

Epigallocatechin-3-gallate derived polymer coated Prussian blue for synergistic ROS elimination and antibacterial therapy

Reactive oxygen species (ROS) play a vital role in wound healing process by fighting against invaded bacteria. However, excess ROS at the wound sites lead to oxidative stress that can trigger deleterious effects, causing cell death, tissue damage and chronic inflammation. Therefore, we fabricated a core-shell structured nanomedicine with antibacterial and antioxidant properties via a facile and green strategy. Specifically, Prussian blue (PB) nanozyme was fabricated and followed by coating a layer of epigallocatechin-3-gallate (EGCG)-derived polymer via polyphenolic condensation reaction and self-assembly process, resulting in PB@EGCG. The introduction of PB core endowed EGCG-based polyphenol nanoparticles with excellent NIR-triggered photothermal properties. Besides, owing to multiple enzyme-mimic activity of PB and potent antioxidant capacity of EGCG-derived polymer, PB@EGCG exhibited a remarkable ROS-scavenging ability, mitigated intracellular ROS level and protected cells from oxidative damage. Under NIR irradiation (808 nm, 1.5 W/cm2), PB@EGCG (50 µg/mL) exerted synergistic EGCG-derived polymer-photothermal antibacterial activity against Gram-negative Escherichia coli (E. coli) and Gram-positive Staphylococcus aureus (S. aureus). In vivo therapeutic effect was evaluated using a S. aureus-infected rat model indicated PB@EGCG with a prominent bactericidal ability could modulate the inflammatory microenvironment and accelerate wound healing. Overall, this dual-functional nanomedicine provides a promising strategy for efficient antibacterial therapy.

Injectable hydrogels activated with copper sulfide nanoparticles for enhancing spatiotemporal sterilization and osteogenesis in periodontal therapy

Developing biomaterials capable of promoting bone regeneration in bacteria-infected sites is of utmost urgency for periodontal disease therapies. Here we produce a hybrid hydrogel by integrating CuS nanoparticles (CuSNPs), which could kill bacteria through photothermal therapy (PTT) triggered by a near infrared (NIR) light, and a gelatin methacryloyl (GelMA) hydrogel, which is injectable and biocompatible. Specifically, CuSNPs were precipitated by chitosan (CS) firstly, then grafted with methacrylic anhydride (MA) to form CuSNP@CS-MA, which was photo-crosslinked with GelMA to synthesize hybrid hydrogels (GelMA/CuSNP). The hybrid hydrogels exhibited a broad-spectrum antibacterial property that could be spatiotemprorally manipulated through applying a NIR light. Their mechanical properties were adjustable by controlling the concentration of CuSNPs, enabling the hydrogels to become more adapted to the oral diseases. Meanwhile, the hybrid hydrogels showed good cytocompatibility in vitro and improved hemostasis in vivo. Moreover, they accelerated alveolar osteogenesis and vascular genesis, successfully treating periodontis in four weeks in a rat model. GelMA/CuSNP hydrogels showed a broad-spectrum sterilization ability via PTT in vitro and outstanding antibacterial property in vivo, suggesting that the hybrid hydrogels could function in the challenging, bacteria-rich, oral environment. Such injectable hybrid hydrogels, capable of achieving both facilitated osteogenesis and NIR-inducible sterilization, represent a new biomaterial for treating periodontitis.

Self-propelling bacteria-based magnetic nanoparticles (BacMags) for targeted magnetic hyperthermia therapy against hypoxic tumors

Magnetic hyperthermia-based cancer therapy (MHCT) holds great promise as a non-invasive approach utilizing heat generated by an alternating magnetic field for effective cancer treatment. For an efficacious therapeutic response, it is crucial to deliver therapeutic agents selectively at the depth of tumors. In this study, we present a new strategy using the naturally occurring tumor-colonizing bacteria Escherichia coli (E. coli) as a carrier to deliver magnetic nanoparticles to hypoxic tumor cores for effective MHCT. Self-propelling delivery agents, "nano-bacteriomagnets" (BacMags), were developed by incorporating anisotropic magnetic nanocubes into E. coli which demonstrated significantly improved hyperthermic performance, leading to an impressive 85% cell death in pancreatic cancer. The in vivo anti-cancer response was validated in a syngeneic xenograft model with a 50% tumor inhibition rate within 20 days and a complete tumor regression within 30 days. This proof-of-concept study demonstrates the potential of utilizing anaerobic bacteria for the delivery of magnetic nanocarriers as a smart therapeutic approach for enhanced MHCT.

A magnetic nanozyme platform for bacterial colorimetric detection and chemodynamic/photothermal synergistic antibacterial therapy

Rapid, convenient, and sensitive detection of bacteria and development of novel antibacterial materials are conducive to accurate treatment of bacterial infection and reducing the generation of drug-resistant bacteria caused by overuse of antibiotics. A dual-function magnetic nanozyme, Fc-MBL@rGO@Fe3O4, has been constructed with broad-spectrum bacterial affinity and good peroxidase-like activity. Detection signal amplification was realized in the presence of 3,3',5,5'-tetramethylbenzidine (TMB) with a detection limit of 26 CFU/mL. In addition, the excellent photothermal properties of Fc-MBL@rGO@Fe3O4 could realize synergistic chemodynamic/photothermal antibacterial therapy. Furthermore, the good bacterial affinity of Fc-MBL@rGO@Fe3O4 enhances the accurate and rapid attack of hydroxyl radical (·OH) on the bacterial membrane and achieves efficient sterilization (100%) at low concentration (40 µg/mL) and mild temperature (47℃). Notably, Fc-MBL@rGO@Fe3O4 has a broad spectrum of antibacterial activity against Gram-negative, Gram-positive, and drug-resistant bacteria. The magnetic nanoplatform integrating detection-sterilization not only meets the need for highly sensitive and accurate detection in different scenarios, but can realize low power density NIR-II light-responsive chemodynamic/photothermal antibacterial therapy, which has broad application prospects.

One-Stop Integrated Nanoagent for Bacterial Biofilm Eradication and Wound Disinfection

To meet the requirements of biomedical applications in the antibacterial realm, it is of great importance to explore nano-antibiotics for wound disinfection that can prevent the development of drug resistance and possess outstanding biocompatibility. Therefore, we attempted to synthesize an atomically dispersed ion (Fe) on phenolic carbon quantum dots (CQDs) combined with an organic photothermal agent (PTA) (Fe@SAC CQDs/PTA) via a hydrothermal/ultrasound method. Fe@SAC CQDs adequately exerted peroxidase-like activity while the PTA presented excellent photothermal conversion capability, which provided enormous potential in antibacterial applications. Based on our work, Fe@SAC CQDs/PTA exhibited excellent eradication of Escherichia coli (>99% inactivation efficiency) and Staphylococcus aureus (>99% inactivation efficiency) based on synergistic chemodynamic therapy (CDT) and photothermal therapy (PTT). Moreover, in vitro experiments demonstrated that Fe@SAC CQDs/PTA could inhibit microbial growth and promote bacterial biofilm destruction. In vivo experiments suggested that Fe@SAC CQDs/PTA-mediated synergistic CDT and PTT exhibited great promotion to wound disinfection and recovery effects. This work indicated that Fe@SAC CQDs/PTA could serve as a broad-spectrum antimicrobial nano-antibiotic, which was simultaneously beneficial for bacterial biofilm eradication, wound disinfection, and wound healing.

Heterogeneous Cu2O-SnO2 doped polydopamine fenton-like nanoenzymes for synergetic photothermal-chemodynamic antibacterial application

Wound infections caused by drug-resistant bacteria pose a great threat to human health, and the development of non-drug-resistant antibacterial approaches has become a research priority. In this study, we developed Cu2O-SnO2 doped polydopamine (CSPDA) triple cubic antibacterial nanoenzymes with high photothermal conversion efficiency and good Fenton-like catalase performance. CSPDA antibacterial nanoplatform can catalyze the generation of hydroxyl radical (·OH) from H2O2 at low concentration (50 μg∙mL-1) under 808 nm near-infrared (NIR) irradiation to achieve a combined photothermal therapy (PTT) and chemodynamic therapy (CDT). And the CSPDA antibacterial nanoplatform displays broad-spectrum and long-lasting antibacterial effects against both Gram-negative Escherichia coli (100 %) and Gram-positive Staphylococcus aureus (100 %) in vitro. Moreover, in a mouse wound model with mixed bacterial infection, the nanoplatform demonstrates a significant in vivo bactericidal effect while remaining good cytocompatible. To conclude, this study successfully develops an efficient and long-lasting bacterial infection treatment system. This system provided different options for future studies on the design of synergistic antimicrobial therapy. Hence, the as-synthesized synergetic photothermal therapy and chemodynamic therapy nanoenzymes have rapid and long-term bactericidal ability, well-conglutinant performance and effectively preventing wound infection for clinical application. STATEMENT OF SIGNIFICANCE: Wound infections caused by drug-resistant bacteria pose a great threat to human health, and the development of non-drug-resistant antibacterial approaches has become a research priority. In this study, we developed Cu2O-SnO2 doped polydopamine (CSPDA) triple cubic yolk-like antibacterial nanoenzymes with high photothermal conversion efficiency and Fenton-like catalase effect for photothermal and Chemodynamic antibacterial therapy, Meanwhile, the nanocomposites exhibit good antibioadhesion in a natural water environment for a long-time immersion. In conclusion, this study successfully develops an efficient and long-lasting bacterial infection treatment system. These findings present a pioneering strategy for future research on the design of synergistic antibacterial and antibioadhesive systems.

Synthesizing Carbon Quantum Dots via Hydrothermal Reaction to Produce Efficient Antibacterial and Antibiofilm Nanomaterials

This study aimed to synthesize antibacterial carbon quantum dots (SP-CDs) from polyethyleneimine and spermidine via hydrothermal reaction. It was revealed that SP-CDs, with small size (7.18 nm) and high positive charge (+31.15 mV), had good fluorescence properties and lots of amino groups on their surfaces. The inhibition effect of SP-CDs on Staphylococcus aureus was better than that towards Escherichia coli, and the SP-CDs also had an inhibitory effect on multi-drug-resistant E. coli. The mechanism of SP-CDs shows that the SP-CDs were adsorbed on the surface of the negatively charged cell membrane through electrostatic interaction. SP-CDs can cause changes in membrane permeability, resulting in a shift of the cell membrane from order to disorder and the decomposition of chemical components, followed by the leakage of cell contents, resulting in bacterial death. SP-CDs can also significantly inhibit biofilm formation, destroy mature biofilms and reduce the number of living cells. Moreover, SP-CDs had negligible antimicrobial resistance even after 18 generations of treatment. This study proves that SP-CDs effectively inhibit the proliferation of foodborne pathogens, providing new feasibility for the application of carbon-based nanomaterials in the food industry.

Photothermal therapy of copper incorporated nanomaterials for biomedicine

Studies have reported on the significance of copper incorporated nanomaterials (CINMs) in cancer theranostics and tissue regeneration. Given their unique physicochemical properties and tunable nanostructures, CINMs are used in photothermal therapy (PTT) and photothermal-derived combination therapies. They have the potential to overcome the challenges of unsatisfactory efficacy of conventional therapies in an efficient and non-invasive manner. This review summarizes the recent advances in CINMs-based PTT in biomedicine. First, the classification and structure of CINMs are introduced. CINMs-based PTT combination therapy in tumors and PTT guided by multiple imaging modalities are then reviewed. Various representative designs of CINMs-based PTT in bone, skin and other organs are presented. Furthermore, the biosafety of CINMs is discussed. Finally, this analysis delves into the current challenges that researchers face and offers an optimistic outlook on the prospects of clinical translational research in this field. This review aims at elucidating on the applications of CINMs-based PTT and derived combination therapies in biomedicine to encourage future design and clinical translation.

Amplification of oxidative damage using near-infrared II-mediated photothermal/thermocatalytic effects for periodontitis treatment

Periodontitis is a biofilm-related disease characterized by damage to the periodontal tissue and the development of systemic diseases. However, treatment of periodontitis remains unsatisfactory, especially with deep-tissue infections. This study describes rationally designed multifunctional photothermocatalytic agents for near-infrared-II light-mediated synergistic antibiofilm treatment, through modification of Lu-Bi2Te3 with Fe3O4 and poly(ethylene glycol)-b-poly(l-arginine) (PEG-b-PArg). Notably, 1064-nm laser irradiation led to photothermal/thermocatalytic effects, resulting in the synergistic generation of reactive oxygen species (ROS) and reactive nitrogen species (RNS) and consequent damage to the biofilm. This treatment was based on the thermoelectric and photothermal conversion properties of Lu-Bi2Te3, the peroxidase-like catalytic capacity of Fe3O4, and the guanidinium polymer, PEG-b-PArg. Oxidative damage to biofilm was further enhanced by H2O2, resulting in the effective elimination of biofilm both in vitro and in vivo. These findings suggest that this synergistic therapeutic strategy is effective for the clinical treatment of periodontitis. STATEMENT OF SIGNIFICANCE: The current treatment for periodontitis involves time-consuming and labor-intensive clinical scaling of the teeth. The present study is the first to assess the efficacy of a photothermal catalyst for periodontitis treatment. This used near-infrared-II light at 1064 nm to induce oxidative damage in the biofilm, resulting in its degradation. The synergistic photothermal/thermoelectric effect produced deep tissue penetration and was well tolerated, and can kill the biofilm formed by periodontitis pathogens up to 5 orders of magnitude, effectively treating the biofilm-induced periodontitis.

Manganese-Iron Dual Single-Atom Catalyst with Enhanced Nanozyme Activity for Wound and Pustule Disinfection

Even though great progress has been achieved in mimicking natural enzyme engineering, few artificial enzymes with efficient catalytic performance and multifunction have been reported. In this study, novel manganese-iron dual single-atom catalysts (Mn/Fe SACs) were synthesized via a hydrothermal/pyrolysis recipe. Iron atoms inside the Mn/Fe SACs adequately exerted the peroxidase (POD)-like activity, its Michaelis-Menten constant, and maximum initial velocity superior to the horseradish peroxidase. Manganese atoms sufficiently catalyzed the H2O2 to generate oxygen (O2), which alleviated the challenge of the continued lack of O2 in the infected wound. In addition, Mn/Fe SACs possess a glutathione oxidase-like activity that further enhanced POD-like activity in the therapeutic process. The antibacterial rates of Mn/Fe SACs were 95 and 94.5% for Escherichia coli and Staphylococcus aureus, respectively. In vitro anti-inflammatory experiments demonstrated that Mn/Fe SACs could regulate the polarization of macrophages into the anti-inflammatory M2 subtype. In vivo wound healing experiments suggested that the combination therapy of Mn/Fe SACs and chemodynamic therapy presented a great promotion of the recovery rate. Moreover, the O2 generated by the catalase-like process contributed to the catalysts permeating the interior of the infected wounds and achieved preferable abscess elimination ability. This work revealed the potential of Mn/Fe SACs as broad-spectrum antimicrobial materials, which provided a novel strategy for treating infected and abscess wounds.

Two-dimensional TiO nanosheets with photothermal effects for wound sterilization

To combat multidrug-resistant bacteria, researchers have poured into the development and design of antimicrobial agents. Here, low-cost two-dimensional (2D) antibacterial material titanium monoxide nanosheets (TiO NSs) were prepared by an ultrasonic-assisted liquid-phase exfoliation method. When cultured with bacteria, TiO NSs showed intrinsic antimicrobial capacity, possibly due to membrane damage caused by the sharp edges of TiO NSs. Under near-infrared (NIR) laser irradiation, TiO NSs showed high photothermal conversion efficiency (PTCE) and sterilization efficiency. By combining these two antibacterial mechanisms, TiO NSs exhibited a strong killing effect on Gram-negative Escherichia coli (E. coli) and Gram-positive methicillin-resistant Staphylococcus aureus (MRSA). Especially after treatment with TiO NSs (150 μg mL-1) +near-infrared (NIR) light irradiation, both bacteria were completely killed. In vivo experiments on wound repair of bacterial infection further confirmed its antibacterial effect. In addition, TiO NSs had no obvious toxicity or side effects, so as a kind of broad-spectrum 2D antibacterial nanoagent, TiO NSs have broad application prospects in the field of pathogen infection.

Biofilm Microenvironment-Responsive Self-Assembly Nanoreactors for All-Stage Biofilm Associated Infection through Bacterial Cuproptosis-like Death and Macrophage Re-Rousing

Bacterial biofilm-associated infections (BAIs) are the leading cause of prosthetic implant failure. The dense biofilm structure prevents antibiotic penetration, while the highly acidic and H2 O2 -rich biofilm microenvironment (BME) dampens the immunological response of antimicrobial macrophages. Conventional treatments that fail to consistently suppress escaping planktonic bacteria from biofilm result in refractory recolonization, allowing BAIs to persist. Herein, a BME-responsive copper-doped polyoxometalate clusters (Cu-POM) combination with mild photothermal therapy (PTT) and macrophage immune re-rousing for BAI eradication at all stages is proposed. The self-assembly of Cu-POM in BME converts endogenous H2 O2 to toxic ·OH through chemodynamic therapy (CDT) and generates a mild PTT effect to induce bacterial metabolic exuberance, resulting in loosening the membrane structure of the bacteria, enhancing copper transporter activity and increasing intracellular Cu-POM flux. Metabolomics reveals that intracellular Cu-POM overload restricts the TCA cycle and peroxide accumulation, promoting bacterial cuproptosis-like death. CDT re-rousing macrophages scavenge planktonic bacteria escaping biofilm disintegration through enhanced chemotaxis and phagocytosis. Overall, BME-responsive Cu-POM promotes bacterial cuproptosis-like death via metabolic interference, while also re-rousing macrophage immune response for further planktonic bacteria elimination, resulting in all-stage BAI clearance and providing a new reference for future clinical application.

Antibacterial Chemodynamic Therapy: Materials and Strategies

The wide and frequent use of antibiotics in the treatment of bacterial infection can cause the occurrence of multidrug-resistant bacteria, which becomes a serious health threat. Therefore, it is necessary to develop antibiotic-independent treatment modalities. Chemodynamic therapy (CDT) is defined as the approach employing Fenton and/or Fenton-like reactions for generating hydroxyl radical (•OH) that can kill target cells. Recently, CDT has been successfully employed for antibacterial applications. Apart from the common Fe-mediated CDT strategy, antibacterial CDT strategies mediated by other metal elements such as copper, manganese, cobalt, molybdenum, platinum, tungsten, nickel, silver, ruthenium, and zinc have also been proposed. Furthermore, different types of materials like nanomaterials and hydrogels can be adopted for constructing CDT-involved antibacterial platforms. Besides, CDT can introduce some toxic metal elements and then achieve synergistic antibacterial effects together with reactive oxygen species. Finally, CDT can be combined with other therapies such as starvation therapy, phototherapy, and sonodynamic therapy for achieving improved antibacterial performance. This review first summarizes the advancements in antibacterial CDT and then discusses the present limitations and future research directions in this field, hoping to promote the development of more effective materials and strategies for achieving potentiated CDT.

Cu-GA-coordination polymer nanozymes with triple enzymatic activity for wound disinfection and accelerated wound healing

During the past few years, bacterial infection and oxidative stress have become important issues for wound healing. However, the emergence of numerous drug-resistant superbugs has had a serious impact on the treatment of infected wounds. Presently, the development of new nanomaterials has become one of the most important approaches to the treatment of drug-resistant bacterial infections. Herein, coordination polymer copper-gallic acid (Cu-GA) nanorods with multi-enzyme activity is successfully prepared for efficient wound treatment of bacterial infection, which can effectively promote wound healing. Cu-GA can be efficiently prepared by a simple solution method and had good physiological stability. Interestingly, Cu-GA shows enhanced multienzyme activity (peroxidase, glutathione peroxidase, and superoxide dismutase), which can produce a large number of reactive oxygen species (ROS) under acidic conditions while scavenging ROS under neutral conditions. In acidic environment, Cu-GA possesses POD (peroxidase)-like and glutathione peroxidase (GSH-Px)-like catalytic activities that is capable of killing bacteria; but in neutral environment, Cu-GA exhibits superoxide dismutase (SOD)-like catalytic activity that can scavenge ROS and promote wound healing. In vivo studies show that Cu-GA can promote wound infection healing and have good biosafety. Cu-GA contributes to the healing of infected wounds by inhibiting bacterial growth, scavenging reactive oxygen species, and promoting angiogenesis. STATEMENT OF SIGNIFICANCE: Cu-GA-coordinated polymer nanozymes with multienzyme activity were successfully prepared for efficient wound treatment of bacterial infection, which could effectively promote wound healing. Interestingly, Cu-GA exhibited enhanced multienzyme activity (peroxidase, glutathione peroxidase, and superoxide dismutase), which could produce a large number of reactive oxygen species (ROS) under acidic conditions and scavenge ROS under neutral conditions. In vitro and in vivo studies demonstrated that Cu-GA was capable of killing bacteria, controlling inflammation, and promoting angiogenesis.

Biocompatible Calcium Ion-Doped Magnesium Ferrite Nanoparticles as a New Family of Photothermal Therapeutic Materials for Cancer Treatment

Novel biocompatible and efficient photothermal (PT) therapeutic materials for cancer treatment have recently garnered significant attention, owing to their effective ablation of cancer cells, minimal invasiveness, quick recovery, and minimal damage to healthy cells. In this study, we designed and developed calcium ion-doped magnesium ferrite nanoparticles (Ca²⁺-doped MgFe₂O₄ NPs) as novel and effective PT therapeutic materials for cancer treatment, owing to their good biocompatibility, biosafety, high near-infrared (NIR) absorption, easy localization, short treatment period, remote controllability, high efficiency, and high specificity. The studied Ca²⁺-doped MgFe₂O₄ NPs exhibited a uniform spherical morphology with particle sizes of 14.24 ± 1.32 nm and a strong PT conversion efficiency (30.12%), making them promising for cancer photothermal therapy (PTT). In vitro experiments showed that Ca²⁺-doped MgFe₂O₄ NPs had no significant cytotoxic effects on non-laser-irradiated MDA-MB-231 cells, confirming that Ca²⁺-doped MgFe₂O₄ NPs exhibited high biocompatibility. More interestingly, Ca²⁺-doped MgFe₂O₄ NPs exhibited superior cytotoxicity to laser-irradiated MDA-MB-231 cells, inducing significant cell death. Our study proposes novel, safe, high-efficiency, and biocompatible PT therapeutics for treating cancers, opening new vistas for the future development of cancer PTT.

Antibacterial Evaluation of Zirconia Coated with Plasma-Based Graphene Oxide with Photothermal Properties

The alternative antibacterial treatment photothermal therapy (PTT) significantly affects oral microbiota inactivation. In this work, graphene with photothermal properties was coated on a zirconia surface using atmospheric pressure plasma, and then the antibacterial properties against oral bacteria were evaluated. For the graphene oxide coating on the zirconia specimens, an atmospheric pressure plasma generator (PGS-300, Expantech, Suwon, Republic of Korea) was used, and an Ar/CH₄ gas mixture was coated on a zirconia specimen at a power of 240 W and a rate of 10 L/min. In the physiological property test, the surface properties were evaluated by measuring the surface shape of the zirconia specimen coated with graphene oxide, as well as the chemical composition and contact angle of the surface. In the biological experiment, the degree of adhesion of Streptococcus mutans (S. mutans) and Porphyromonas gingivalis (P. gingivalis) was determined by crystal violet assay and live/dead staining. All statistical analyzes were performed using SPSS 21.0 (SPSS Inc., Chicago, IL, USA). The group in which the zirconia specimen coated with graphene oxide was irradiated with near-infrared rays demonstrated a significant reduction in the adhesion of S. mutans and P. gingivalis compared with the group not irradiated. The oral microbiota inactivation was reduced by the photothermal effect on the zirconia coated with graphene oxide, exhibiting photothermal properties.

Nanomaterials for the treatment of bacterial infection by photothermal/photodynamic synergism

In the past few decades, great progress has been made in the field of nanomaterials against bacterial infection. However, with the widespread emergence of drug-resistant bacteria, people try their best to explore and develop new antibacterial strategies to fight bacteria without obtaining or increasing drug resistance. Recently, multi-mode synergistic therapy has been considered as an effective scheme for the treatment of bacterial infections, especially the combination of photothermal therapy (PTT) and photodynamic therapy (PDT) with controllable, non-invasive, small side effects and broad-spectrum antibacterial characteristics. It can not only improve the efficiency of antibiotics, but also do not promote antibiotic resistance. Therefore, multifunctional nanomaterials which combine the advantages of PTT and PDT are more and more used in the treatment of bacterial infections. However, there is still a lack of a comprehensive review of the synergistic effect of PTT and PDT in anti-infection. This review first focuses on the synthesis of synergistic photothermal/photodynamic nanomaterials and discusses the ways and challenges of photothermal/photodynamic synergism, as well as the future research direction of photothermal/photodynamic synergistic antibacterial nanomaterials.

Photothermal/lysozyme-catalyzed hydrolysis dual-modality therapy via halloysite nanotube-based platform for effective bacterial eradication

Bacterial biofilm seriously impedes the healing of infected wound, remaining a major challenge in wound repair. Antibiotic-free antibacterial strategies based on nanotechnology are emerging as promising tools to combat bacterial infections. Here, halloysite nanotube (HNT), as a natural clay mineral, was employed to fabricate a multifunctional platform (designated as HNTs@CuS@PDA-Lys) through a layer-by-layer strategy for treating bacterial infections by utilizing synergistic lysozyme (Lys)-photothermal therapy (PTT). Specifically, amino-modified HNTs were first decorated with copper sulfide (CuS), followed by coated with a polydopamine (PDA) layer, then functionalized with antimicrobial enzyme Lys onto the surface of PDA via cation-π interactions. The as-prepared HNTs@CuS@PDA-Lys at a low dose (200 μg/mL) exhibited excellent synergistic Lys-photothermal bactericidal activity against Escherichia coli (E. coli) (100.0 ± 0.2 %) and Staphyloccocus aureus (S. aureus) (99.9 ± 0.1 %), eliminated 75.9 ± 2.0 % of S. aureus biofilm under near-infrared (NIR) irradiation (808 nm, 1.5 W/cm²). In vivo experiments using a S. aureus-infected rat model showed HNTs@CuS@PDA-Lys could rapidly kill bacteria and accelerate wound healing process. Overall, this multifunctional nanoplatform combines the advantages of PTT and Lys, providing a cost-efficient, environmental friendly strategy for bacterial and biofilm eradication, demonstrating the potential applications in the field of biomedicine.

All-in-one bioactive properties of photothermal nanofibers for accelerating diabetic wound healing

Diabetic wound healing has attracted widespread attention in biomedical engineering. However, the harsh hypoxic microenvironment (HME) comprising high glucose levels, local bleeding, and bacterial infection often leads to the formation of hyperplastic scars, increasing the clinical demand for wound dressings. Here, we report a comprehensive strategy using near-infrared NIR-assisted oxygen delivery combined with the bioactive nature of biopolymers for remodeling the HME. Black phosphorus (BP) nanosheets and hemoglobin (Hb) were self-assembled layerwise onto electrospun poly-l-lactide (PLLA) nanofibers using charged quaternized chitosan (QCS) and hyaluronic acid. BP converts NIR radiation into heat and stimulates Hb to release oxygen in situ. QCS is a hemostatic and broad-spectrum antibacterial material. Moderate BP-derived photothermal therapy can increase the sensitivity of bacteria to QCS. A series of composite wound dressings (coded as PQBH-n) with different numbers of layers were fabricated, and the in vivo diabetic wound healing potentials were tested. The molecular mechanism can be partly attributed to the cytokine-cytokine receptor interaction. Notably, this comprehensive strategy based on NIR-assisted oxygen delivery combined with the bioactive properties of biopolymers is not only applicable for fabricating multifunctional wound dressings but also has a great potential in expanding biomedical engineering fields.

Organic Photothermal Cocrystals: Rational Design, Controlled Synthesis, and Advanced Application

Organic photothermal cocrystals, integrating the advantages of intrinsic organic cocrystals and the fascinating photothermal conversion ability, hold attracted considerable interest in both basic science and practical applications, involving photoacoustic imaging, seawater desalination, and photothermal therapy, and so on. However, these organic photothermal cocrystals currently suffer individual cases discovered step by step, as well as the deep and systemic investigation in the corresponding photothermal conversion mechanisms is rarely carried out, suggesting a huge challenge for their further developments. Therefore, it is urgently necessary to investigate and explore the rational design and synthesis of high-performance organic photothermal cocrystals for future applications. This review first and systematically summarizes the organic photothermal cocrystal in terms of molecular classification, the photothermal conversion mechanism, and their corresponding applications. The timely interpretation of the cocrystal photothermal effect will provide broad prospects for the purposeful fabrication of excellent organic photothermal cocrystals toward great efficiency, low cost, and multifunctionality.

Development of pH-Sensitive Magnetoliposomes Containing Shape Anisotropic Nanoparticles for Potential Application in Combined Cancer Therapy

Late diagnosis and systemic toxicity associated with conventional treatments make oncological therapy significantly difficult. In this context, nanomedicine emerges as a new approach in the prevention, diagnosis and treatment of cancer. In this work, pH-sensitive solid magnetoliposomes (SMLs) were developed for controlled release of the chemotherapeutic drug doxorubicin (DOX). Shape anisotropic magnetic nanoparticles of magnesium ferrite with partial substitution by calcium (Mg_0.75Ca_0.25Fe₂O₄) were synthesized, with and without calcination, and their structural, morphological and magnetic properties were investigated. Their superparamagnetic properties were evaluated and heating capabilities proven, either by exposure to an alternating magnetic field (AMF) (magnetic hyperthermia) or by irradiation with near-infrared (NIR) light (photothermia). The Mg_0.75Ca_0.25Fe₂O₄ calcined nanoparticles were selected to integrate the SMLs, surrounded by a lipid bilayer of DOPE:Ch:CHEMS (45:45:10). DOX was encapsulated in the nanosystems with an efficiency above 98%. DOX release assays showed a much more efficient release of the drug at pH = 5 compared to the release kinetics at physiological pH. By subjecting tumor cells to DOX-loaded SMLs, cell viability was significantly reduced, confirming that they can release the encapsulated drug. These results point to the development of efficient pH-sensitive nanocarriers, suitable for a synergistic action in cancer therapy with magnetic targeting, stimulus-controlled drug delivery and dual hyperthermia (magnetic and plasmonic) therapy.

Bioinspired MoS2 Nanosheet-Modified Carbon Fibers for Synergetic Bacterial Elimination and Wound Disinfection

Bacterial infection is one of the most frequent wound complications and has become a major public health concern. Increasing resistance to antibiotics has been noted with these agents broadly used in wound management. It is an urgent demand to develop alternative antibacterial strategies with a reduced chance of resistance. Herein, a Nepenthes-mimicking nanosheet array of MoS₂ on carbon fibers (CF-MoS₂ ) is proposed to achieve dual bactericidal activities. First, the sharp edges of synthesized surfaces are capable of inducing physical disruption of cell membranes, demonstrating mechanical antibacterial activity like their natural counterparts. Second, in the presence of near-infrared light, bioinspired CF-MoS₂ nanosheets are able to cause the death of damaged bacteria owing to their inherent photothermal properties. Such dual-functional modes endow the surfaces with nearly 100% killing efficiency for highly concentrated Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus). Furthermore, their potential to be applied as wound dressings for photothermal treatment of infectious wounds is also investigated in vivo. Bioinspired CF-MoS₂ dressings show advantages of synergistic disinfection and efficient promotion of wound regeneration. It is foreseen that this high-performance and multifunctional CF-MoS₂ could afford a feasible broad-spectrum treatment for non-antibiotic disinfection.

Bioinspired Synthesis of Magnetic Nanoparticles Based on Iron Oxides Using Orange Waste and Their Application as Photo-Activated Antibacterial Agents

Magnetic nanoparticles based on iron oxides (MNPs-Fe) have been proposed as photothermal agents (PTAs) within antibacterial photothermal therapy (PTT), aiming to counteract the vast health problem of multidrug-resistant bacterial infections. We present a quick and easy green synthesis (GS) to prepare MNPs-Fe harnessing waste. Orange peel extract (organic compounds) was used as a reducing, capping, and stabilizing agent in the GS, which employed microwave (MW) irradiation to reduce the synthesis time. The produced weight, physical-chemical features and magnetic features of the MNPs-Fe were studied. Moreover, their cytotoxicity was assessed in animal cell line ATCC RAW 264.7, as well as their antibacterial activity against Staphylococcus aureus and Escherichia coli. We found that the 50GS-MNPs-Fe sample (prepared by GS, with 50% v/v of NH₄OH and 50% v/v of orange peel extract) had an excellent mass yield. Its particle size was ~50 nm with the presence of an organic coating (terpenes or aldehydes). We believe that this coating improved the cell viability in extended periods (8 days) of cell culture with concentrations lower than 250 µg·mL^-1, with respect to the MNPs-Fe obtained by CO and single MW, but it did not influence the antibacterial effect. The bacteria inhibition was attributed to the plasmonic of 50GS-MNPs-Fe (photothermal effect) by irradiation with red light (630 nm, 65.5 mW·cm^-2, 30 min). We highlight the superparamagnetism of the 50GS-MNPs-Fe over 60 K in a broader temperature range than the MNPs-Fe obtained by CO (160.09 K) and MW (211.1 K). Therefore, 50GS-MNPs-Fe could be excellent candidates as broad-spectrum PTAs in antibacterial PTT. Furthermore, they might be employed in magnetic hyperthermia, magnetic resonance imaging, oncological treatments, and so on.

Reactive oxygen species-upregulating nanomedicines towards enhanced cancer therapy

Reactive oxygen species (ROS) play a crucial role in physiological and pathological processes, emerging as a therapeutic target in cancer. Owing to the high concentration of ROS in solid tumor tissues, ROS-based treatments, such as photodynamic therapy and chemodynamic therapy, and ROS-responsive drug delivery systems have been widely explored to powerfully and specifically suppress tumors. However, their anticancer efficacy is still hampered by the heterogeneous ROS levels, and thus comprehensively upregulating the ROS levels in tumor tissues can ensure an enhanced therapeutic effect, which can further sensitize and/or synergize with other therapies to inhibit tumor growth and metastasis. Herein, we review the recently emerging drug delivery strategies and technologies for increasing the H₂O₂, ˙OH, ¹O₂, and ˙O₂^- concentrations in cancer cells, including the efficient delivery of natural enzymes, nanozymes, small molecular biological molecules, and nanoscale Fenton-reagents and semiconductors and neutralization of intracellular antioxidant substances and localized input of mechanical and electromagnetic waves (such as ultrasound, near infrared light, microwaves, and X-rays). The applications of these ROS-upregulating nanosystems in enhancing and synergizing cancer therapies including chemotherapy, chemodynamic therapy, phototherapy, and immunotherapy are surveyed. In addition, we discuss the challenges of ROS-upregulating systems and the prospects for future studies.

NIR Responsive Doxorubicin-Loaded Hollow Copper Ferrite @ Polydopamine for Synergistic Chemodynamic/Photothermal/Chemo-Therapy

Osteosarcoma (OS) is the most serious bone malignancy, and the survival rate has not significantly improved in the past 40 years. Thus, it is urgent to develop a new strategy for OS treatment. Chemodynamic therapy (CDT) as a novel therapeutic method can destroy cancer cells by converting endogenous hydrogen peroxide (H₂ O₂ ) into highly toxic hydroxyl radicals (·OH). However, the therapeutic efficacy of CDT is severely limited by the low catalytic efficiency and overexpressed glutathione (GSH). Herein, an excellent nanocatalytic platform is constructed via a simple solvothermal method using F127 as a soft template to form the hollow copper ferrite (HCF) nanoparticle, followed by the coating of polydopamine on the surface and the loading of doxorubicin (DOX). The Fe³⁺ and Cu²⁺ released from HCF@polydopamine (HCFP) can deplete GSH through the redox reactions, and then trigger the H₂ O₂ to generate ·OH by Fenton/Fenton-like reaction, resulting in enhanced CDT efficacy. Impressively, the photothermal effect of HCFP can further enhance the efficiency of CDT and accelerate the release of DOX. Both in vitro and in vivo experiments reveal that the synergistic chemodynamic/photothermal/chemo-therapy exhibits a significantly enhanced anti-OS effect. This work provides a promising strategy for OS treatment.

ε-poly-L-lysine-modified polydopamine nanoparticles for targeted photothermal therapy of drug-resistant bacterial keratitis

Bacterial keratitis can lead to intraocular infection and even blindness without prompt and potent treatments. Currently, clinical abuse of antibiotics encouraged the evolution of resistant bacteria. Conventional antibiotic eye drops based keratitis treatment has been heavily restricted due to the lack of bactericidal efficiency and easy induction of bacterial resistance. Hence, developing an effective treatment strategy for bacterial keratitis is of great significance. In this work, we investigated ε-poly-l-lysine (EPL)-modified polydopamine (PDA) nanoparticles (EPL@PDA NPs)-mediated antibacterial photothermal therapy (aPTT), to cope with methicillin-resistant Staphylococcus aureus (MRSA)-induced keratitis. The surface modification of cationic peptide EPL enables EPL@PDA NPs to specifically target negatively charged MRSA and induces local hyperthermia to kill the bacteria under low ambient temperature. Under near-infrared (NIR) irradiation, the sterilization efficiency of EPL@PDA NPs suspension for MRSA in vitro was up to 99.96%. The EPL@PDA-mediated aPTT presented potent antibacterial efficacy in treating MRSA-induced keratitis with little corneal epithelial cytotoxicity and good biocompatibility. In conclusion, the bacterial-targeting aPTT platform in this work provides a prospective method for the management of MRSA-induced refractory bacterial keratitis.

Magnetocontrollable droplet mobility on liquid crystal-infused porous surfaces

Magnetocontrollable droplet mobility on surfaces of both solids and simple fluids have been widely used in a wide range of applications. However, little is understood about the effect of the magnetic field on the wettability and mobility of droplets on structured fluids. Here, we report the manipulation of the dynamic behaviors of water droplets on a film of thermotropic liquid crystals (LCs). We find that the static wetting behavior and static friction of water droplets on a 4'-octyl-4-biphenylcarbonitrile (8CB) film strongly depend on the LC mesophases, and that a magnetic field caused no measurable change to these properties. However, we find that the droplet dynamics can be affected by a magnetic field as it slides on a nematic 8CB film, but not on isotropic 8CB, and is dependent on both the direction and strength of the magnetic field. By measuring the dynamic friction of a droplet sliding on a nematic 8CB film, we find that a magnetic field alters the internal orientational ordering of the 8CB which in turn affects its viscosity. We support this interpretation with a scaling argument using the LC magnetic coherence length that includes (i) the elastic energy from the long-range orientational ordering of 8CB and (ii) the free energy from the interaction between 8CB and a magnetic field. Overall, these results advance our understanding of droplet mobility on LC films and enable new designs for responsive surfaces that can manipulate the mobility of water droplets.

ELECTRONIC SUPPLEMENTARY MATERIAL

Supplementary material (further details of the stability of LCIPS against water-induced dewetting, the interfacial tension and contact angle measurement using a goniometer, the estimation of the thickness of LC wrapping layer at air-water interface on droplets, SEM measurements, the average sliding velocity of a water droplet on 5CB, E7, silicone oil, and mineral oil films with and without a magnetic field, representative force diagram (F _d versus time) of a 3-µL water droplet moving at a speed of 0.1 mm/s on a nematic 8CB film, F _dynamic acting on 3 µL water droplets moving at speeds of 0.1-1 mm/s on an isotropic 8CB film, the calculated magnetic coherence length as a function of the magnitude of the magnetic field applied to the nematic LCIPS, and the apparent advancing and receding contact angles of a moving water droplet on nematic LCIPS as a function of time, and polarized light micrographs (top view) of a nematic 8CB film between two DMOAP-functionalized glass slides before and after applying a horizontal magnetic field) is available in the online version of this article at 10.1007/s12274-022-5318-y.

Advanced Multifunctional Wound Dressing Hydrogels as Drug Carriers

Skin injuries, especially chronic wounds, remain a significant healthcare system problem. The number of burns, diabetic patients, pressure ulcers, and other damages is also growing, particularly in elderly populations. Several investigations are pursued in designing more effective therapeutics for treating different wound injuries. These efforts have resulted in developing multifunctional wound dressings to improve wound repair. For this, preparing multifunctional dressings using various methods has provided a new attitude to support effective skin regeneration. This review focuses on the recent developments in designing multifunctional hydrogel dressings with hemostasis, adhesiveness, antibacterial, and antioxidant properties.

Niobium carbide–mediated photothermal therapy for infected wound treatment

Bacterial infections of the wounds on the skin surface significantly reduce the rate of wound healing, potentially leading to serious systemic infections. Antibiotics are the first-line drugs for the treatment of these infections. However, the misuse and overuse of antibiotics have led to the emergence of bacterial resistance. Therefore, a new antimicrobial strategy is urgently needed. Photothermal therapy (PTT) is a novel efficient therapeutic technique that can produce irreversible cell damage to induce death of bacteria, possessing a great potential in infected wound healing. This work describes the use of a new photothermal agent (PTA) such as niobium carbide (NbC) nanoparticles with outstanding near-infrared (NIR) absorption property. NbC nanoparticles converted NIR laser irradiation energy into localized heat for photothermal treatment. In vitro antimicrobial experiments have revealed that NbC nanoparticles exert excellent antimicrobial effects against Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli). Moreover, NbC nanoparticles accelerated E. coli–infected wound healing process, reduced inflammatory response, and showed good biosafety in vivo. Altogether, NbC nanoparticles represent an efficient PTA for antimicrobial treatment and are a bio-safe material with low toxicity in vivo.

Multifunctional phototheranostic agent ZnO@Ag for anti-infection through photothermal/photodynamic therapy

To overcome the limitations of traditional therapeutics, nanotechnology offers a synergistic therapeutic approach for the treatment of bacterial infection and biofilms that has attracted attention. Herein, we report on a ZnO@Ag nanocomposite with good biocompatibility synthesized by doping ZnO NPs with silver nanoparticles (Ag NPs). ZnO@Ag nanocomposites were synthesized with varying ratios of Ag NPs (0.5%, 2%, 8%). Under the same experimental conditions, ZnO@8%Ag exhibited outstanding properties compared to the other nanocomposites and the pristine ZnO NPs. ZnO@8%Ag demonstrated excellent photothermal and photodynamic properties. Also, ZnO@8%Ag demonstrated over 99% inhibition of Staphylococcus aureus (S. aureus) under photothermal therapy (PTT) or photodynamics therapy (PDT) as a result of the excessive generation of reactive oxygen species (ROS) by the Ag+ released, while the pristine ZnO showed an insignificant inhibition rate compared to the PBS group (control). Furthermore, ZnO@8%Ag completely disrupted S. aureus biofilm under a combined PTT/PDT treatment, a synergetic trimodal therapy, although the molecular mechanism of biofilm inhibition remains unclear. Hence, the excellent photothermal, photodynamic, biocompatibility, and bactericidal properties of ZnO@8%Ag present it as an appropriate platform for bacterial and biofilm treatment or other biomedically related applications.

An overview of nanomaterial-based novel disinfection technologies for harmful microorganisms: Mechanism, synthesis, devices and application

Harmful microorganism (e.g., new coronavirus) based infection is the most important security concern in life sciences and healthcare. This article aims to provide a state-of-the-art review on the development of advanced technology based on nanomaterial disinfection/sterilization techniques (NDST) for the first time including the nanomaterial types, disinfection techniques, bactericidal devices, sterilization products, and application scenarios (i.e., water, air, medical healthcare), with particular brief account of bactericidal behaviors referring to varied systems. In this emerging research area spanning the years from 1998 to 2021, total of ~200 publications selected for the type of review paper and research articles were reviewed. Four typical functional materials (namely type of metal/metal oxides, S-based, C-based, and N-based) with their development progresses in disinfection/sterilization are summarized with a list of synthesis and design. Among them, the widely used silver nanoparticles (AgNPs) are considered as the most effective bacterial agents in the type of nanomaterials at present and has been reported for inactivation of viruses, fungi, protozoa. Some methodologies against (1) disinfection by-products (DBPs) in traditional sterilization, (2) noble metal nanoparticles (NPs) agglomeration and release, (3) toxic metal leaching, (4) solar spectral response broadening, and (5) photogenerated e^-/h⁺ pairs recombination are reviewed and discussed in this field, namely (1) alternative techniques and nanomaterials, (2) supporter anchoring effect, (3) nonmetal functional nanomaterials, (4) element doping, and (5) heterojunction constructing. The feasible strategies in the perspective of NDST are proposed to involve (1) non-noble metal disinfectors, (2) multi-functional nanomaterials, (3) multi-component nanocomposite innovation, and (4) hybrid techniques for disinfection/sterilization system. It is promising to achieve 100% bactericidal efficiency for 10⁸ CFU/mL within a short time of less than 30 min.

Curcumin-loaded multifunctional chitosan gold nanoparticles: An enhanced PDT/PTT dual-modal phototherapeutic and pH-responsive antimicrobial agent

Overuse of antibiotics has led to the emergence of multidrug resistant (MDR) bacteria.. Photothermal (PTT) and photodynamic therapy (PDT) have may be effective alternatives for antibiotics in the treatment of bacterial infections. In this study, based on chitosan (CS)-coated gold nanoparticles, a pH stimulus-responsive drug delivery system was developed, which can anchor to the cell membrane for photodynamic therapy and photothermal therapy, and enhance the therapeutic potential of curcumin (Cur). Release experiments showed that AuNPs/CS-Cur nanocomposites released curcumin in a pH-dependent manner, which may facilitate the drug to be delivered to the acidic bacterial infection environment. CS as the outer layer covered on gold nanoparticles could improve the dispersibility of Cur in aqueous solution, gold nanoparticles prevent rapid photobleaching of curcumin, thus ensuring the yield of singlet oxygen under irradiation, and enhance the electrostatic binding with bacteria cell membrane. Under light conditions, AuNPs/CS-Cur can produce a large amount of reactive oxygen species and heat to kill S. aureus and E. coli. Compared with free Cur-mediated PDT, the complex significantly improved the synergistic PTT/PDT photoinactivation ability against S. aureus and E. coli. In addition, AuNPs/CS-Cur had good biocompatibility. Therefore, AuNPs/CS-Cur possessed the characteristics of electrostatic targeting, photodynamic and photothermal antibacterial therapy, which would become an efficient and safe antibacterial nano-platform and provide new ideas for the treatment of bacterial infection.

High-Efficiency Near-Infrared Light Responsive Antibacterial System for Synergistic Ablation of Bacteria and Biofilm

Bacterial infection is seriously threatening human health, and the design of high-efficiency and good biocompatibility antibacterial agents is an urgent problem to be solved. However, with the emergence of drug-resistant bacteria, the existing antibacterial agents have low killing efficiency, and the formation of biofilms has further weakened the therapeutic effect. Herein, we constructed an efficient antibacterial system mediated by near-infrared light for synergistic antibacterial and biofilm dissipation. Specifically, the ZnO/Ti₃C₂T_x with heterojunction was synthesized by hydrothermal growth of ZnO on the surface of lamellar Ti₃C₂T_x-MXene. The prepared ZnO/Ti₃C₂T_x had better photothermal ability than ZnO and Ti₃C₂T_x, respectively. The local thermal effect can not only destroy the integrity of the bacterial membrane but also promote the release of Zn²⁺ ions and further improve the antibacterial performance. ZnO/Ti₃C₂T_x achieved a 100% sterilization rate (better than either ZnO or Ti₃C₂T_x) at 150 μg mL^-1. The biofilm dissipation experiment further proved its excellent biofilm ablation effect. More importantly, the results of in vitro cell culture and animal experiments have demonstrated its good biological safety. In summary, this new type of nanomaterial shows strong local chemical photothermal sterilization ability and has great potential to replace traditional antibacterial agents.

Unveiling the interplay between homogeneous and heterogeneous catalytic mechanisms in copper-iron nanoparticles working under chemically relevant tumour conditions

The present work sheds light on a generally overlooked issue in the emerging field of bio-orthogonal catalysis within tumour microenvironments (TMEs): the interplay between homogeneous and heterogeneous catalytic processes. In most cases, previous works dealing with nanoparticle-based catalysis in the TME focus on the effects obtained (e.g. tumour cell death) and attribute the results to heterogeneous processes alone. The specific mechanisms are rarely substantiated and, furthermore, the possibility of a significant contribution of homogeneous processes by leached species - and the complexes that they may form with biomolecules - is neither contemplated nor pursued. Herein, we have designed a bimetallic catalyst nanoparticle containing Cu and Fe species and we have been able to describe the whole picture in a more complex scenario where both homogeneous and heterogeneous processes are coupled and fostered under TME relevant chemical conditions. We investigate the preferential leaching of Cu ions in the presence of a TME overexpressed biomolecule such as glutathione (GSH). We demonstrate that these homogeneous processes initiated by the released by Cu-GSH interactions are in fact responsible for the greater part of the cell death effects found (GSH, a scavenger of reactive oxygen species, is depleted and highly active superoxide anions are generated in the same catalytic cycle). The remaining solid CuFe nanoparticle becomes an active catalyst to supply oxygen from oxygen reduced species, such as superoxide anions (by-product from GSH oxidation) and hydrogen peroxide, another species that is enriched in the TME. This activity is essential to sustain the homogeneous catalytic cycle in the oxygen-deprived tumour microenvironment. The combined heterogeneous-homogeneous mechanisms revealed themselves as highly efficient in selectively killing cancer cells, due to their higher GSH levels compared to healthy cell lines.

Liquid exfoliation of V8C7 nanodots as peroxidase-like nanozymes for photothermal-catalytic synergistic antibacterial treatment

Nanozymes are effective antibiotics that use reactive oxygen species (ROS) produced by Fenton/Fenton-like reactions to kill bacteria. However, its activity is still not satisfactory and requires large amounts of hydrogen peroxide (H₂O₂) with side effects on normal tissues. Herein, ultrasmall V₈C₇ nanodots (NDs) are successfully constructed by the liquid-phase exfoliation method for photothermal-catalytic synergistic antibacterial treatment. The prepared V₈C₇ NDs are horseradish peroxidase (HRP)-like nanozymes that can efficiently catalyze H₂O₂ to produce a large amount of ROS. Unlike traditional HRP-like nanozymes, V₈C₇ NDs can have a good catalytic effect under slightly acidic conditions (pH=5.5). Moreover, V₈C₇ NDs have good near-infrared (NIR) absorption and high photothermal conversion efficiency (PTCE, 50.39%), which can be used for photothermal treatment (PTT) of bacteria. In addition, the mild photothermal effect can further enhance the HRP-like catalytic activity of V₈C₇ NDs, thereby further enhancing the antibacterial performance of V₈C₇ NDs. In vitro results show that V₈C₇ NDs can effectively eradicate Escherichia coli (E. coli, gram-negative) and methicillin-resistant Staphylococcus aureus (MRSA, gram-positive) under laser irradiation and the presence of H₂O₂, possessing spectral antibacterial properties. More importantly, V₈C₇ NDs display satisfactory therapeutic effects on wounds infected by MRSA in vivo, and their toxicity is negligible, suggesting that they may have great potential for application as powerful and safe antibacterial agents. This work presents a practical antibacterial strategy by combining PTT and catalytic therapy to achieve efficient treatment of bacteria-infected wounds. STATEMENT OF SIGNIFICANCE: (1) Ultrasmall V₈C₇ NDs were prepared by the liquid-phase exfoliation method. (2) V₈C₇ NDs showed good photothermal, catalytic properties. (3) V₈C₇ NDs achieved satisfactory photothermal-catalytic synergistic antibacterial treatment.

Iron oxide Nanoparticles (IONPs) with photothermal performance and enhanced nanozyme activity for bacteria-infected wound therapy

Metal-based nanomaterials usually have broad-spectrum antibacterial properties, low biological toxicity, and no drug resistance due to their intrinsic enzyme-like catalytic properties and external field (magnetic, thermal, acoustic, optical, electrical) responsiveness. Herein, Iron oxide (Fe3O4) nanoparticles (IONPs) synthesized by us have good biosafety, excellent photothermal conversion ability, and peroxidase-like catalytic activity, which can be used to construct a photothermal-enzymes combined antibacterial treatment platform. IONPs with peroxide-like catalytic activity can induce H2O2 to catalyze the production of •OH in a slightly acidic environment, thus achieving certain bactericidal effects and increasing the sensitivity of bacteria to heat. When stimulated by NIR light, the photothermal effect could destroy bacterial cell membranes, resulting in cleavage and inactivation of bacterial protein, DNA, or RNA. Meanwhile, it can also improve the catalytic activity of peroxidase-like, and promote IONPs to catalyze the production of more •OH for killing bacteria. After IONPs synergistic treatment, the antibacterial rate of Escherichia coli and Staphylococcus aureus reached nearly 100%. It also has an obvious killing effect on bacteria in infected wounds of mice, and can effectively promote the healing of S. aureus-infected wounds, which has great application potential in clinical anti-infection treatment.