Subnanometer PtRh Nanowire with Alleviated Poisoning Effect and Enhanced C–C Bond Cleavage for Ethanol Oxidation Electrocatalysis

Research Progress on Preparation and Electrocatalytic Performance of Tin Dioxide Nanomaterials

In the contemporary era of rapid economic growth, addressing the energy issue constitutes a significant subject. In contrast to traditional fossil energy, fuel cells, through specific transformation routes, can generate more energy and reduce pollution under the same conversion relationship. Direct alcohol fuel cells, as a type of proton exchange membrane fuel cell, exhibit relatively superior performance. During the process of converting chemical energy into electrical energy, the conversion efficiency of the electrode is a crucial aspect of the fuel cell's performance, thereby giving rise to electrode electrocatalysis. Nevertheless, the noble metal catalysts employed in current direct alcohol fuel cells are confronted with issues such as high cost, susceptibility to poisoning, and poor durability. A new approach to these problems is urgently needed. Loading noble metals onto metal oxides has been verified as an effective means. Among them, tin dioxide has attracted the attention of researchers due to its outstanding stability, anti-toxicity, and its positive auxiliary role in electrocatalysis. This article will conduct a review of the research progress in loading noble metals on tin dioxide carriers for the electrocatalytic oxidation of small molecule alcohols from various microstructures and loading methods. Finally, the research on metal dioxide electrocatalysts is prospected.

Gold-catalyzed construction of atomically rough surfaces towards high-efficiency ethanol electrooxidation

Atomic surface engineering for nanostructures significantly contributes to the enhancement of electrocatalysis for a given chemical reaction. However, exploring a facile method to elaborately regulate surfaces at atomic scale remains a grand challenge. Herein, we report the construction of atomically rough surfaces (ARSs) on Au-based binary alloys through a novel and controllable gold (Au)-catalyzed strategy, which involves the first synthesis of Au-based bimetallic nanoalloys, i.e., AuPd and AuAg, and subsequent reduction of another metal ions (Pt, Pd, or Ag) initiated by Au sites on the alloy particle surfaces. By combining ARSs with low-coordinated atoms with ligand effect induced by vicinal Au atoms, the as-prepared ARSs exhibit good activity and durability toward ethanol oxidation reaction (EOR) in an alkaline medium. In particular, the Pd-Pt ARSs on the AuPd alloy particle surface (denoted as AuPd-Pt) exhibit the highest electrocatalytic EOR performance in terms of both specific activity (14.9 mA cm-2) and mass activity (28.5 A mg-1), surpassing those of their AuPd alloy counterparts, commercial Pd/C catalyst, and most Pd-based electrocatalysts reported recently. In situ Fourier transform infrared (FTIR) spectroscopy reveals that the EOR process on the Pd-Pt ARSs strongly prefers incomplete oxidation, which is further authenticated by the density functional theory (DFT) calculations.

PdLa Bimetallenes with Nonhomogeneous Crystal Structure for Flexible Isopropanol Sensors

The development of efficient electrochemical catalysts capable of highly sensitive detection of small molecules poses a significant challenge. Recent advancements in two-dimensional materials, such as palladium metallene (Pdene), have shown promising application prospects in overcoming these challenges. Nevertheless, critical issues such as optimizing their electrochemical activity and enhancing sensitivity and selectivity for molecular detection remain unresolved. In this study, we synthesized lanthanum-doped palladium bimetallenes (PdLa BMLs), which serve as high-performance catalysts for constructing flexible electrochemical sensors with highly sensitive and selective responses to isopropanol. This improvement is attributed to the nonhomogeneous crystal structure of the Pdene substrate, which, enhanced by La doping, optimizes the electronic structure and active sites, resulting in increased adsorption capacity (evidenced by a significant upward shift in the d-band center) and reduced reaction energy barriers in the isopropanol oxidation reaction (IOR). Our findings not only demonstrate that La doping enhances the activity of metallene active sites, thereby improving catalytic efficiency, but also broaden the applications of metallenes in electrocatalytic sensors for detecting small molecules relevant to health and food industries.

Multifunctional High-Entropy Alloys and Oxides for Self-Powered Electrocatalytic Nitrate Reduction to Ammonia

High-entropy alloys (HEAs) show high activities toward oxygen reduction reaction (ORR), Zn-air batteries (ZABs) and nitrate reduction reaction (NO3 -RR). In this work, FeNiCoMnRh HEA supported by N-doped carbon frameworks is prepared and showed excellent ORR performance with a half-wave potential (E1/2) of 0.89 V versus RHE, limiting diffusion current (jL) of 5.6 mA cm-2 and better current stability. The HEA-assembled ZAB exhibited a high-power density of 103.8 mW cm-2 with a specific capacity of 790 mAh gZn -1. Also, its oxides presented 77% Faraday efficiency (FE) for ammonia production at -0.3 V versus RHE. Accordingly, our designed ZAB was employed to drive NO3 -RR to construct a self-powered system, which provides an attractive route for low-energy sewage treatment and environmentally friendly preparation of ammonia.

Extraordinary Waveguide-Enhanced Optical Microfiber Sensor for Operando Electrocatalysis Studies

Optical detection and sensing have been widely applied to electrochemical systems, and their cutting-edge technology is creating current trends in operando characterization. The mass transfer at the electrode-electrolyte interface induces not only the electron exchange but also the changes in optical properties such as dielectric constants, resulting in detectable absorption or resonance signals. However, light-matter interactions are limited due to the inherently short optical path length of the interface. Here, we report the ultrasensitive detection of electrocatalytic processes enhanced by waveguide-engineered modal interference. We show that, by modulating the microfiber diameter so that the group phase velocity of beating modes approaches equalization, the substantially enhanced refractive index sensitivity enables accurate capture of chemical dynamics near the electrode surface, presenting a clear "eye diagram" related to the methanol oxidation reaction during operando studies.

Integrated Catalyst ZnNC⊂PtZn for High-Performance Ethanol Electrooxidation and DEFC

We report here an electrocatalyst that exhibits superior performance in the electrooxidation of ethanol. The reactive centers of the catalyst have a nest-type configuration with outer Zn-NxC nest covering inner PtZn intermetallic compound nanoparticles loaded on carbon support (ZnNC⊂PtZn/C). The high-energy stepped facets of the inner PtZn nanoparticles confined and shaped by the outer Zn-NxC nest is highly active for the critical C-C bond cleavage of ethanol in oxidation, confirmed by experimental characterizations and density functional theory calculations. The catalyst shows a rare high-performance and demonstrates a mass activity of 3.7 A mgPt -1 and a Faradaic efficiency of 78.2 %, following the C1 pathway of reaction and the retention of initial activity remains 97 % after 5,000 cycles. The unique configuration, also mitigating the concentration polarization, endows the catalyst with innate ethanol electrooxidation property by inner-outer synergic interactions, leading to unexpected power output of an acidic direct ethanol fuel cell.

Ligand Effect of PdRu on Pt-Enriched Surface for Glucose Complete Electro-Oxidation to Carbon Dioxide and Abiotic Direct Glucose Fuel Cells

The development of advanced electrocatalysts for the abiotic direct glucose fuel cells (ADGFCs) is critical in the implantable devices in living organisms. The ligand effect in the Pt shell-alloy core nanocatalysts is known to influence the electrocatalytic reaction in interfacial structure. Herein, we reported the synthesis of ternary Pt@PdRu nanoalloy aerogels with ligand effect of PdRu on Pt-enriched surface through electrochemical cycling. Pt@PdRu aerogels with optimized Pt surface electronic structure exhibited high mass activity and specific activity of Pt@PdRu about 450 mA mgPt -1 and 1.09 mA cm-2, which were 1.4 and 1.6 times than that of commercial Pt/C. Meanwhile, Pt@PdRu aerogels have higher electrochemical stability comparable to commercial Pt/C. In-situ FTIR spectra results proved that the glucose oxidation reaction on Pt@PdRu aerogels followed the CO-free direct pathway reaction mechanism and part of the products are CO2 by completed oxidation. Furthermore, the ADGFC with Pt@PdRu ultrathin anode catalyst layer showed a much higher power density of 6.2 mW cm-2 than commercial Pt/C (3.8 Mw cm-2). To simulate the blood fuel cell, the Pt@PdRu integrated membrane electrode assembly was exposed to glucose solution and a steady-state open circuit of approximately 0.6 V was achieved by optimizing the glucose concentration in cell system.

Strain engineering of PtMn alloy enclosed by high-indexed facets boost ethanol electrooxidation

Surface strain engineering has proven to be an efficient strategy to enhance catalytic properties of platinum (Pt)-based catalysts for electrooxidation reactions. Herein, the S-doped PtMn concave cubes (CNCs) enclosed with high index facets (HIFs) and regulatable surface strain are successfully fabricated by two steps hydrothermal method. The S element with electrophilic property can modify the near-surface of PtMn nanocrystals, altering the electronic structure of Pt to effectively regulate the adsorption/desorption of intermediates in the ethanol electrooxidation reaction (EOR). The PtMnS1.1 catalyst with optimal surface strain delivered extraordinary catalytic performance on EOR in acidic media, with a specific activity of 2.88 mA/cm2 and mass activity of 1.10 mA/μgPt, which is 4.1 and 2.2 times larger than that of state-of-the-art Pt/C catalyst, respectively. Additionally, the PtMnS1.1 catalyst also achieve excellent catalytic properties in alkaline electrolyte for EOR. The results of kinetic studies indicated that the surface strain and modified electronic structure can degrade the activation energy barrier during the process of EOR, which is beneficial for enhance the reaction rate. This work provides a promising approach to construct highly efficient electrocatalysts with tunable surface strain effects for clean energy electro-chemical reactions.

Coupling High-Entropy Core with Rh Shell for Efficient pH-Universal Hydrogen Evolution

Constructing high-entropy alloys (HEAs) with core-shell (CS) nanostructure is efficient for enhancing catalytic activity. However, it is extremely challenging to incorporate the CS structure with HEAs. Herein, PtCoNiMoRh@Rh CS nanoparticles (PtCoNiMoRh@Rh) with ∼5.7 nm for pH-universal hydrogen evolution reaction (HER) are reported for the first time. The PtCoNiMoRh@Rh just require 9.1, 24.9, and 17.1 mV to achieve -10 mA cm-2 in acid, neutral, and alkaline electrolyte, and the corresponding mass activity are 5.8, 2.79, and 91.8 times higher than that of Rh/C. Comparing to PtCoNiMoRh nanoparticles, the PtCoNiMoRh@Rh exhibit excellent HER activity attributed to the decrease of Rh 4d especially 4d5/2 unoccupied state induced by the multi-active sites in HEA, as well as the synergistic effect in Rh shell and HEA core. Theorical calculation exhibits that Rh-dyz, dx2, and dxz orbitals experience a negative shift with shell thickness increasing. The HEAs with CS structure would facilitate the rational design of high-performance HEAs catalysts.

2D PtRhPb Mesoporous Nanosheets with Surface-Clean Active Sites for Complete Ethanol Oxidation Electrocatalysis

The development of active and selective metal electrocatalysts for complete ethanol oxidation reaction (EOR) into desired C1 products is extremely promising for practical application of direct ethanol fuel cells. Despite some encouraging achievements, their activity and selectivity remain unsatisfactory. In this work, it is reported that 2D PtRhPb mesoporous nanosheets (MNSs) with anisotropic structure and surface-clean metal site perform perfectly for complete EOR electrocatalysis in both three-electrode and two-electrode systems. Different to the traditional routes, a selective etching strategy is developed to produce surface-clean mesopores while retaining parent anisotropy quasi-single-crystalline structure without the mesopore-forming surfactants. This method also allows the general synthesis of surface-clean mesoporous metals with other compositions and structures. When being performed for alkaline EOR electrocatalysis, the best PtRhPb MNSs deliver remarkably high activity (7.8 A mg-1) and superior C1 product selectivity (70% of Faradaic efficiency), both of which are much better than reported electrocatalysts. High performance is assigned to multiple structural and compositional synergies that not only stabilized key OHads intermediate by surface-clean mesopores but also separated the chemisorption of two carbons in ethanol by adjacent Pt and Rh sites, which facilitate the oxidation cleavage of stable C─C bond for complete EOR electrocatalysis.

Ultrafine IrMnOx Nanocluster Decorated Amorphous PdS Nanowires as Efficient Electrocatalysts for High C1 Selectivity in the Alkaline Ethanol Oxidation Reaction

As a novel electrochemical energy conversion device, direct ethanol fuel cells are currently encountering two significant challenges: CO poisoning and the difficulty of C-C bond cleavage in ethanol. In this work, an amorphous PdS nanowires/ultrafine IrMnOx bimetallic oxides (denoted as a-PdS/IrMnOx NWs) catalyst with abundant oxide/metal (crystalline/amorphous) inverse heterogeneous interfaces was synthesized via a hydrothermal process succeeded by a nonthermal air-plasma treatment. This unique interfacial electronic structure along with the incorporation of oxyphilic metal has resulted in a significant enhancement in the electrocatalytic performance of a-PdS/IrMnOx NWs toward the ethanol oxidation reaction, achieving current densities of 12.45 mA·cm-2 and 3.68 A·mgPd-1. Moreover, the C1 pathway selectivity for ethanol oxidation has been elevated to 47%, exceeding that of other as-prepared Pd-based counterparts and commercial Pd/C catalysts. Density functional theory calculations have validated the findings that the decoration of IrMn species onto the amorphous PdS surface has induced a charge redistribution in the interface region. The redistribution of surface charges on the a-PdS/IrMnOx NWs catalyst results in a significant decrease in the activation energy required for C-C bond cleavage and a notable weakening of the CO binding strength at the Pd active sites. Consequently, it enhanced both the EOR C1 pathway selectivity and CO poisoning resistance to the a-PdS/IrMnOx NWs catalyst.

Rhodium-Rhenium Alloy Nanozymes for Non-inflammatory Photothermal Therapy

Analogous to thermal ablation techniques in clinical settings, cell necrosis induced during tumor photothermal therapy (PTT) can provoke an inflammatory response that is detrimental to the treatment of tumors. In this study, we employed a straightforward one-step liquid-phase reduction process to synthesize uniform RhRe nanozymes with an average hydrodynamic size of 41.7 nm for non-inflammatory photothermal therapy. The obtained RhRe nanozymes showed efficient near-infrared (NIR) light absorption for effective PTT, coupled with a remarkable capability to scavenge reactive oxygen species (ROS) for anti-inflammatory treatment. After laser irradiation, the 4T1 tumors were effectively ablated without obvious tumor recurrence within 14 days, along with no obvious increase in pro-inflammatory cytokine levels. Notably, these RhRe nanozymes demonstrated high biocompatibility with normal cells and tissues, both in vitro and in vivo, as evidenced by the lack of significant toxicity in female BALB/c mice treated with 10 mg/kg of RhRe nanozymes over a 14 day period. This research highlights RhRe alloy nanoparticles as bioactive nanozymes for non-inflammatory PTT in tumor therapy.

Advancements in Noble Metal-Decorated Porous Carbon Nanoarchitectures: Key Catalysts for Direct Liquid Fuel Cells

Noble-metal nanocrystals have emerged as essential electrode materials for catalytic oxidation of organic small molecule fuels in direct liquid fuel cells (DLFCs). However, for large-scale commercialization of DLFCs, adopting cost-effective techniques and optimizing their structures using advanced matrices are crucial. Notably, noble metal-decorated porous carbon nanoarchitectures exhibit exceptional electrocatalytic performances owing to their three-dimensional cross-linked porous networks, large accessible surface areas, homogeneous dispersion (of noble metals), reliable structural stability, and outstanding electrical conductivity. Consequently, they can be utilized to develop next-generation anode catalysts for DLFCs. Considering the recent expeditious advancements in this field, this comprehensive review provides an overview of the current progress in noble metal-decorated porous carbon nanoarchitectures. This paper meticulously outlines the associated synthetic strategies, precise microstructure regulation techniques, and their application in electrooxidation of small organic molecules. Furthermore, the review highlights the research challenges and future opportunities in this prospective research field, offering valuable insights for both researchers and industry experts.

Synthesis of Solvent-Mediated Morphology-Controlled PdSn Alloy Nanocatalysts and their Application in Electrocatalysis of Ethylene Glycol and Ethanol

2D nanodendrites (NDs) and nanosheets (NSs) have been regarded as efficient nanocatalysts for enhancing the electrocatalytic performance due to their low coordinated sites and abundant electrocatalytic centers. Nevertheless, it remains challenging to construct advanced NDs and NSs in a single reaction system. Herein, by tuning the volume ratios of mixed solvents, the reduction and diffusion rate of Sn2+ on Pd NSs template was rationally controlled to prepare PdSn NDs and PdSn NSs. Ascribed to the open 2D nanostructure, high specific surface area, and robust synergistic effect, the as-prepared PdSn NDs and PdSn NSs exhibited distinguished electrocatalytic activities for ethylene glycol oxidation reaction (EGOR) and ethanol oxidation reaction (EOR), as well as commendable electrocatalytic durability, which were far superior to the Pd NSs and commercial Pd/C. In addition, the PdSn NDs exhibited enhanced reaction kinetics because the characteristic branch structure exposed a high density of active sites. This work may provide significant guidance for preparing excellent nanocatalysts with various morphological features by simply optimizing the content of the coexisting solvents.

Ir-Doped CuPd Single-Crystalline Mesoporous Nanotetrahedrons for Ethylene Glycol Oxidation Electrocatalysis: Enhanced Selective Cleavage of C-C Bond

The development of highly efficient electrocatalysts for complete oxidation of ethylene glycol (EG) in direct EG fuel cells is of decisive importance to hold higher energy efficiency. Despite some achievements, their progress, especially electrocatalytic selectivity to complete oxidated C1 products, is remarkably slower than expected. In this work, we developed a facile aqueous synthesis of Ir-doped CuPd single-crystalline mesoporous nanotetrahedrons (Ir-CuPd SMTs) as high-performance electrocatalyst for promoting oxidation cleavage of C-C bond in alkaline EG oxidation reaction (EGOR) electrocatalysis. The synthesis relied on precise reduction/co-nucleation and epitaxial growth of Ir, Cu and Pd precursors with cetyltrimethylammonium chloride as the mesopore-forming surfactant and extra Br- as the facet-selective agent under ambient conditions. The products featured concave nanotetrahedron morphology enclosed by well-defined (111) facets, single-crystalline and mesoporous structure radiated from the center, and uniform elemental composition without any phase separation. Ir-CuPd SMTs disclosed remarkably enhanced electrocatalytic activity and excellent stability as well as superior selectivity of C1 products for alkaline EGOR electrocatalysis. Detailed mechanism studies demonstrated that performance improvement came from structural and compositional synergies, which kinetically accelerated transports of electrons/reactants within active sites of penetrated mesopores and facilitated oxidation cleavage of high-energy-barrier C-C bond of EG for desired C1 products. More interestingly, Ir-CuPd SMTs performed well in coupled electrocatalysis of anode EGOR and cathode nitrate reduction, highlighting its high potential as bifunctional electrocatalyst in various applications.

A universal synthesis strategy of Pd-based trimetallic nanowires for efficient alcohol electrooxidation

Trimetallic nanowires (NWs) have drawn much attention in efficient alcohol oxidation reaction (AOR) due to their unique features, including high atomic utilization efficiency and fast electron transfer ability. However, a universal strategy to synthesize Pd-based trimetallic NWs with high catalytic performance is still lacking. Herein, we develop a universal method for facile synthesis of PdBiM (M = Pt, Ru, Ir, Co, Cu) NWs with excellent AOR activities. By taking PdBiPt NWs as an example, the formation mechanism was investigated, and it is found that introduction of bismuth (Bi) plays an important role in facilitating the formation of the NW structure. Moreover, the PdBiPt NWs deliver an outstanding performance toward both the ethanol oxidation reaction (EOR) and the methanol oxidation reaction (MOR). Density functional theory (DFT) calculations together with experimental results disclose that the moderate electronic structure of trimetallic PdBiPt NWs can optimize the adsorption of OHads and weaken the adsorption of COads, thereby leading to the substantially enhanced AOR performance. We believe that this work can inspire the design of multimetallic NWs as high-performance catalysts.

Electronic and Geometric Effects Endow PtRh Jagged Nanowires with Superior Ethanol Oxidation Catalysis

Complete ethanol oxidation reaction (EOR) in C1 pathway with 12 transferred electrons is highly desirable yet challenging in direct ethanol fuel cells. Herein, PtRh jagged nanowires synthesized via a simple wet-chemical approach exhibit exceptional EOR mass activity of 1.63 A mgPt-1 and specific activity of 4.07 mA cm-2 , 3.62-fold and 4.28-folds increments relative to Pt/C, respectively. High proportions of 69.33% and 73.42% of initial activity are also retained after chronoamperometric test (80 000 s) and 1500 consecutive potential cycles, respectively. More importantly, it is found that PtRh jagged nanowires possess superb anti-CO poisoning capability. Combining X-ray absorption spectroscopy, X-ray photoelectron spectroscopy as well as density functional theory calculations unveil that the remarkable catalytic activity and CO tolerance stem from both the Rh-induced electronic effect and geometric effect (manifested by shortened Pt─Pt bond length and shrinkage of lattice constants), which facilitates EOR catalysis in C1 pathway and improves reaction kinetics by reducing energy barriers of rate-determining steps (such as *CO → *COOH). The C1 pathway efficiency of PtRh jagged nanowires is further verified by the high intensity of CO2 relative to CH3 COOH/CH3 CHO in infrared reflection absorption spectroscopy.

Self-Interface in Rh Nanosheets-Supported Tetrahedral Rh Nanocrystals for Promoting Electrocatalytic Oxidation of Ethanol

Direct ethanol fuel cells hold great promise as a power source. However, their commercialization is limited by anode catalysts with insufficient selectivity toward a complete oxidation of ethanol for a high energy density, as well as sluggish catalytic kinetics and low stability. To optimize the catalytic performance, rationally tuning surface structure or interface structure is highly desired. Herein, a facile route is reported to the synthesis of Rh nanosheets-supported tetrahedral Rh nanocrystals (Rh THs/NSs), which possess self-supporting homogeneous interface between Rh tetrahedrons and Rh nanosheets. Due to full leverage of the structural advantages within the given structure and construction of interfaces, the Rh THs/NSs can serve as highly active electro-catalysts with excellent mass activity and selectivity toward ethanol electro-oxidation. The in situ Fourier transform infrared reflection spectroscopy showed the Rh THs/NSs exhibit the highest C1 pathway selectivity of 23.2%, far exceeding that of Rh nanotetrahedra and Rh nanosheets. Density function theory calculations further demonstrated that self-interface between Rh nanosheets and tetrahedra is beneficial for C-C bond cleavage of ethanol. Meanwhile, the self-supporting of 2D nanosheets greatly enhance the stability of tetrahedra, which improves the catalytic stability.

Ultrathin Rh Nanosheets with Rich Grain Boundaries for Efficient Hydrogen Oxidation Electrocatalysis

Two-dimensional (2D) Pt-group ultrathin nanosheets (NSs) are promising advanced electrocatalysts for energy-related catalytic reactions. However, improving the electrocatalytic activity of 2D Pt-group NSs through the addition of abundant grain boundaries (GBs) and understanding the underlying formation mechanism remain significant challenges. Herein, we report the controllable synthesis of a series of Rh-based nanocrystals (e.g., Rh nanoparticles, Rh NSs, and Rh NSs with GBs) through a CO-mediated kinetic control synthesis route. In light of the 2D NSs' structural advantages and GB modification, the Rh NSs with rich GBs exhibit an enhanced electrocatalytic activity compared to pure Rh NSs and commercial Pt/C toward the hydrogen oxidation reaction (HOR) in alkaline media. Both experimental results and theoretical computations corroborate that the GBs in the Rh NSs have the capacity to ameliorate the adsorption free energy of reaction intermediates during the HOR, thus resulting in outstanding HOR catalytic performance. Our work offers novel perspectives in the realm of developing sophisticated 2D Pt-group metal electrocatalysts with rich GBs for the energy conversion field.

Modulating the d-Band Center Enables Ultrafine Pt3 Fe Alloy Nanoparticles for pH-Universal Hydrogen Evolution Reaction

By providing dual active sites to synergistically accelerate H2 O dissociation and H+ reduction, ordered intermetallic alloys usually show extraordinary performance for pH-universal hydrogen evolution reaction (HER). Herein, activated N-doped mesoporous carbon spheres supported intermetallic Pt3 Fe alloys (Pt3 Fe/NMCS-A), as a highly-efficient electrocatalyst for pH-universal HER, are reported. The Pt3 Fe/NMCS-A exhibits low overpotentials (η10 ) of 13, 29, and 48 mV to deliver 10 mA cm-2 in 0.5 m H2 SO4 , 1.0 m KOH, and 1.0 m phosphate buffered solution (PBS), respectively, as well as robust stability to maintain the overall catalytic performances. Theoretical studies reveal that the strong Pt 5d-Fe 3d orbital electronic interactions negatively shift the d-band center (εd ) of Pt 5d orbital, resulting in reduced H* adsorption energy of Pt sites and enhanced acidic HER activity. With Pt and Fe acting as co-adsorption sites for H* and *OH intermediates, respectively, a low energy barrier is required for Pt3 Fe/NMCS-A to dissociate H2 O to afford H* intermediates, which greatly promotes the H* adsorption and H2 formation in alkaline and neutral conditions. The synthetic strategy is further extended to the synthesis of Pt3 Co and Pt3 Ni alloys with excellent HER activity in pH-universal electrolytes, demonstrating the great potential of these Pt-based alloys for practical applications.

Surface Ligand Modification on Ultrathin Ni(OH)2 Nanosheets Enabling Enhanced Alkaline Ethanol Oxidation Kinetics

The ethanol oxidation reaction (EOR) is an economical pathway in many electrochemical systems for clean energy, such as ethanol fuel cells and the anodic reaction in hydrogen generation. Noble metals, such as platinum, are benchmark catalysts for EOR owing to their superb electrochemical capability. To improve sustainability and product selectivity, nickel (Ni)-based electrocatalysts are considered promising alternatives to noble-metal EOR. Although Ni-based electrocatalysts are relieved from intermediate poisoning, their performances are largely limited by their relatively high onset potential. Therefore, the EOR usually competes with the oxygen evolution reaction (OER) at working potentials, resulting in a low EOR efficiency. Here, we demonstrate a strategy to modify the surface ligands on ultrathin Ni(OH)2 nanosheets, which substantially improved their catalytic properties for the alkaline EOR. Chemisorbed octadecylamine ligands could create an alcoholophilic layer at the nanosheet surface to promote alcohol diffusion and adsorption, resulting in outstanding EOR activity and selectivity over the OER at higher potential. These non-noble-metal-based 2D electrocatalysts and surface ligand engineering showcase a promising strategy for achieving high-efficiency electrocatalysis of EOR in many practical electrochemical processes.

Bismuth Incorporation in Palladium Hydride for the Electrocatalytic Ethanol Oxidation with Enhanced CO Tolerance

Introducing nonmetal and oxophilic metal into palladium (Pd)-based catalysts is beneficial for boosting electrocatalysis, especially regarding the improvement of mass activity (MA) and CO tolerance. Herein, the stable bismuth-doped palladium hydride (Bi/PdH) networks have been successfully fabricated through a simple one-step method. The intercalation of interstitial H atoms expands the lattice of Pd, and the doping of oxophilic metal Bi restrains the adsorption of poisonous intermediates on the surface of Pd, thereby improving the activity and durability of the as-prepared catalysts in the ethanol oxidation reaction (EOR). The obtained Bi/PdH networks manifest a remarkable MA of 8.51 A·mgPd-1, which is 11.18 times higher than that of commercial Pd/C (0.76 A·mgPd-1). The CO-stripping analysis results indicate that Bi doping can significantly prohibit CO adsorption on the surface of the Bi/PdH networks. The density functional theory (DFT) calculations also reveal that Bi doping enhances the OH* adsorption on the catalyst surface and mitigates the interaction between Pd and CO* intermediates, providing deeper insights into the origin of the enhanced EOR activity and CO tolerance. This work describes an impactful path for producing high-performance and durable PdH-based nanocatalysts.

Au/Pt Bimetallic Nanowires with Stepped Pt Sites for Enhanced C-C Cleavage in C2+ Alcohol Electro-oxidation Reactions

Efficient C-C bond cleavage and oxidation of alcohols to CO2 is the key to developing highly efficient alcohol fuel cells for renewable energy applications. In this work, we report the synthesis of core/shell Au/Pt nanowires (NWs) with stepped Pt clusters deposited along the ultrathin (2.3 nm) stepped Au NWs as an active catalyst to effectively oxidize alcohols to CO2. The catalytic oxidation reaction is dependent on the Au/Pt ratios, and the Au1.0/Pt0.2 NWs have the largest percentage (∼75%) of stepped Au/Pt sites and show the highest activity for ethanol electro-oxidation, reaching an unprecedented 196.9 A/mgPt (32.5 A/mgPt+Au). This NW catalyst is also active in catalyzing the oxidation of other primary alcohols, such as methanol, n-propanol, and ethylene glycol. In situ X-ray absorption spectroscopy and infrared spectroscopy are used to characterize the catalyst structure and to identify key reaction intermediates, providing concrete evidence that the synergy between the low-coordinated Pt sites and the stepped Au NWs is essential to catalyze the alcohol oxidation reaction, which is further supported by DFT calculations that the C-C bond cleavage is indeed enhanced on the undercoordinated Pt-Au surface. Our study provides important evidence that a core/shell structure with stepped core/shell sites is essential to enhance electrochemical oxidation of alcohols and will also be central to understanding electro-oxidation reactions and to the future development of highly efficient direct alcohol fuel cells for renewable energy applications.

Ethanol Oxidation via 12-Electron Pathway on Spiky Au@AuPd Nanoparticles Assisted by Near-Infrared Light

In this work, ethanol oxidation reaction (EOR) via 12-electron (C1-12e) pathway on spiky Au@AuPd nanoparticles (NPs) with ultrathin AuPd alloy shells is achieved in alkaline media with the assistance of the near-infrared (NIR) light. It is found that OH radicals can be produced from the OH_ads species adsorbed on the surfaces of Pd atoms led by surface plasmon resonance (SPR) effect of spiky Au@AuPd NPs under the irradiation of NIR light. Moreover, OH radicals play the key role for the achievement of EOR proceeded by the desirable C1-12e pathway because OH radicals can directly break the C-C bonds of ethanol. Accordingly, the electrocatalytic performance of spiky Au@AuPd NPs toward EOR under NIR light is greatly improved. For instance, their mass activity can be up to 33.2 A mg_pd ^-1 in the 0.5 m KOH solution containing 0.5 m ethanol, which is about 158 times higher than that of commercial Pd/C catalysts (0.21 A mg_pd ^-1 ) and is better than those of the state-of-the-art Pd-based catalysts reported in literature thus far, to the best of our knowledge. Moreover, their highest mass activity can be further improved to 118.3 A mg_pd ^-1 in the 1.5 m KOH solution containing 1.25 m ethanol.

One-pot synthesis of ultrafine trimetallic PtPdCu alloy nanoparticles decorated on carbon nanotubes for bifunctional catalysis of ethanol oxidation and oxygen reduction

Bifunctional catalysts for ethanol oxidation reaction (EOR) and oxygen reduction reaction (ORR) with high noble-metal utilization are highly beneficial to direct ethanol fuel cells (DEFCs). This study developed a ternary bifunctional catalyst composed of ultrafine PtPdCu alloy nanoparticles and carbon nanotubes (CNTs) support through a facile surfactant-free solvothermal route. The carboxyl terminal groups on CNTs ensure the confined growth of PtPdCu alloys (∼5 nm) and suppress Ostwald ripening of metallic active sites during electrochemical cycling. Consequently, PtPdCu/CNTs exhibits high mass activity (1.95 A mg^-1) and specific activity (4.08 mA cm^-2) toward EOR, which are 7.8 and 8.9 times higher, respectively, than those of commercial Pt/C. Furthermore, PtPdCu/CNTs displays superior stability toward EOR compared with its bimetallic counterparts (PtPd/CNTs and PtCu/CNTs). In addition, PtPdCu/CNTs exhibits the highest half-wave potential of 0.888 V among all electrocatalysts, indicating high ORR activity. Density functional theory calculations reveal that Pd and Cu mediate the electronic structure of Pt, leading to enhanced catalytic activity of PtPdCu/CNTs. The excellent catalytic property of PtPdCu/CNTs can also be attributed to the bifunctional effects of Pd/Cu and the interaction between metal and the carbon support. The proposed material is a contribution to the family of efficient ternary-alloy electrocatalysts for fuel cells.

A review of advanced oxidation process towards organic pollutants and its potential application in fracturing flowback fluid

Fracturing flowback fluid (FFF) including various kinds of organic pollutants that do harms to people and new treatments are urgently needed. Advanced oxidation processes (AOPs) are suitable methods in consideration with molecular weight, removal cost and efficiency. Here, we summarize the recent studies about AOP treatments towards organic pollutants and discuss the application prospects in treatment of FFF. Immobilization and loading methods of catalysts, evaluation method of degradation of FFF, and continuous treatment process flow are discussed in this review. In conclusion, further studies are urgently needed in aspects of catalyst loading methods, macromolecule organic evaluation methods, industrial process, and pathways of macromolecule organics' decomposition.

Rhodium metallene-supported platinum nanocrystals for ethylene glycol oxidation reaction

Low-temperature fuel cells have great application potential in electric vehicles and portable electronic devices, which need advanced electrocatalysts. Controlling the composition and morphology of electrocatalysts can effectively improve their catalytic performance. In this work, a Rh metallene (Rhlene)-supported Pt nanoparticle (Pt/Rhlene) electrocatalyst is successfully synthesized by a simple chemical reduction method, in which ultra-small Pt nanoparticles are uniformly attached to the Rhlene surface due to the high surface area of Rhlene. Pt/Rhlene reveals a 3.60-fold Pt-mass activity enhancement for the ethylene glycol oxidation reaction in alkaline solution compared with commercial Pt black, and maintains high stability and excellent poisoning-tolerance during electrocatalysis, owing to the specific physical/chemical properties of Rhlene. The superior electrocatalytic performance of Pt/Rhlene may open an avenue to synthesize other metallene-supported noble metal nanoparticle hybrids for various electrocatalytic applications.

Controllable Synthesis of PtIrCu Ternary Alloy Ultrathin Nanowires for Enhanced Ethanol Electrooxidation

Rational design and controllable synthesis of catalysts with unique structure and composition are effective ways to promote electrocatalytic ethanol oxidation, thus contributing the direct ethanol fuel cells to gain ground. Herein, 2.5 nm-thin PtIrCu ternary alloy ultrathin nanowires (UNWs) with high-density planar defects are synthesized via oriented attachment with the assistance of H₂. By adjusting the contents of Ir and Cu atoms, we find that the structure of the products changed from nanowires (NWs) to nanoparticles with the increase of Ir content. Density functional theory calculations show that when Cu atoms are replaced by Ir atoms, the vacancy formation energy of Pt atoms is increased, making the Pt atoms difficult to be activated by H₂, which is not conducive to the formation of a one-dimensional structure. The optimal Pt₄₃Ir₃₂Cu₂₅ UNWs achieve excellent ethanol electrooxidation reaction activity (1.05 A·mg^-1_Pt and 1.67 mA·cm^-2), for it can significantly reduce the onset potential and improve the ability of CO anti-poisoning. The significant improvement in catalytic performance is attributed to the synergistic effect of the alloy and the NW structure with high-density planar defects.

Pd Metallene Aerogels with Single-Atom W Doping for Selective Ethanol Oxidation

The development of advanced electrocatalysts with satisfactory C1 pathway selectivity for the ethanol oxidation reaction (EOR) is critical. Herein, a bubbling CO-induced gelation method is developed in acetic acid at 50 °C to construct single-atom W-doped Pd metallene aerogels (denoted as SA W-Pd MAs) within 1 h. In light of the metallene structural advantages of noble metal aerogels and single-atom W decoration, the resultant SA W-Pd MAs exhibit an outstanding EOR performance with high C1 pathway selectivity. Density functional theory calculations validate that the SA W-Pd MAs greatly improve the formation of the CH₃O intermediate and the transformation of poisonous CO species to CO₂, thus resulting in high C1 pathway selectivity. Therefore, this work not only offers an effective gelation method to fabricate noble metal aerogels with atomic-scale building blocks but also presents guidance to develop high-efficiency EOR electrocatalysts.

Soluble porous organic cages as homogenizers and electron-acceptors for homogenization of heterogeneous alloy nanoparticle catalysts with enhanced catalytic activity

The creation of ultrafine alloy nanoparticles (<5 nm) that can maintain surface activity and avoid aggregation for heterogeneous catalysis has received much attention and is extremely challenging. Here, ultrafine PtRh alloy nanoparticles imprisoned by the cavities of reduced chiral covalent imine cage (PtRh@RCC3) are prepared successfully by an organic molecular cage (OMC) confinement strategy, while the soluble RCC3 can act as a homogenizer to homogenize the heterogeneous PtRh alloy in solution. Moreover, the X-ray absorption near-edge structure (XANES) results show that the RCC3 can act as an electron-acceptor to withdraw electrons from Pt, leading to the formation of higher valence Pt atoms, which is beneficial to improving the catalytic activity for the reduction of 4-nitrophenol. Attributed to the synergistic effect of Pt/Rh atoms and the unique function of the RCC3, the reaction rate constants of Pt₁Rh₁₆@RCC3 are 49.6, 8.2, and 5.5 times than those of the Pt₁Rh₁₆ bulk, Pt@RCC3 and Rh@RCC3, respectively. This work provides a feasible strategy to homogenize heterogeneous alloy nanoparticle catalysts in solution, showing huge potential for advanced catalytic application.

Controlled Synthesis of Carbon-Supported Pt-Based Electrocatalysts for Proton Exchange Membrane Fuel Cells

Proton exchange membrane fuel cells are playing an increasing role in postpandemic economic recovery and climate action plans. However, their performance, cost, and durability are significantly related to Pt-based electrocatalysts, hampering their large-scale commercial application. Hence, considerable efforts have been devoted to improving the activity and durability of Pt-based electrocatalysts by controlled synthesis in recent years as an effective method for decreasing Pt use, and consequently, the cost. Therefore, this review article focuses on the synthesis processes of carbon-supported Pt-based electrocatalysts, which significantly affect the nanoparticle size, shape, and dispersion on supports and thus the activity and durability of the prepared electrocatalysts. The reviewed processes include (i) the functionalization of a commercial carbon support for enhanced catalyst–support interaction and additional catalytic effects, (ii) the methods for loading Pt-based electrocatalysts onto a carbon support that impact the manufacturing costs of electrocatalysts, (iii) the preparation of spherical and nonspherical Pt-based electrocatalysts (polyhedrons, nanocages, nanoframes, one- and two-dimensional nanostructures), and (iv) the postsynthesis treatments of supported electrocatalysts. The influences of the supports, key experimental parameters, and postsynthesis treatments on Pt-based electrocatalysts are scrutinized in detail. Future research directions are outlined, including (i) the full exploitation of the potential functionalization of commercial carbon supports, (ii) scaled-up one-pot synthesis of carbon-supported Pt-based electrocatalysts, and (iii) simplification of postsynthesis treatments. One-pot synthesis in aqueous instead of organic reaction systems and the minimal use of organic ligands are preferred to simplify the synthesis and postsynthesis treatment processes and to promote the mass production of commercial carbon-supported Pt-based electrocatalysts.

Graphical Abstract

This review focuses on the synthesis process of Pt-based electrocatalysts/C to develop aqueous one-pot synthesis at large-scale production for PEMFC stack application.

Ultrathin Pd3 Pt1 Rh0.1 Nanorings with Strong C-C Bond Breaking Ability for the Ethanol Oxidation Reaction

Ethanol as a fuel for direct ethanol fuel cells (DEFCs) has the advantages of being highly energetic, environmentally friendly, and low-cost, while the slow anodic ethanol oxidation reaction (EOR), intermediate poisoning effect, and incomplete oxidation of ethanol became obstacles to the development of DEFCs. Herein, a 2D ternary cyclic Pd₃ Pt₁ Rh_0.1 nanorings (NRs) catalyst with efficient EOR performance is prepared via a facile one-pot solvothermal approach, and systematic studies are carried out to reveal the mechanisms of the enhanced performance and C-C bond selectivity. In particular, the optimized catalyst exhibits impressive mass activity, stability, toxicity resistance, and C-C bond cleavage ability. It's proposed that the considerable performance is attributed to the unique hollow structure, providing abundant active sites. The high toxicity resistance is not only attributed to the electronic modulation of the catalyst material by Rh atoms, but also depends on the excellent water activation properties of Rh, which contribute to the removal of intermediates, such as CO. In addition, the density functional theory calculations showed that the introduction of Rh significantly enhances the C-C bond cleavage ability of the catalyst, further improving the EOR activity.

Pt-Sn alloy shells with tunable composition and structure on Au nanoparticles for boosting ethanol oxidation

Combining the core-shell structure with the optimization of surface composition and structure in the shell is a fantastic strategy to enhance the electrocatalytic performances. Here, we synthesized trimetallic Au@Pt_xSn_y core-shell nanoparticles (NPs) with tunable composition and structure of Pt-Sn alloyed shells. Impressively, the Au@PtSn core-shell NPs with hexagonal PtSn alloyed shells exhibited the highest mass activity and specific activity toward ethanol oxidation reaction (EOR) in alkaline electrolyte, which are 13.0 and 12.7 times higher than those of the commercial Pt/C. In addition, the Au@PtSn core-shell NPs displayed the best stability compared to commercial Pt/C, with only 44.8% loss vs. 86.8% loss in mass activity after 1,000 s due to the stronger anti-poisoning ability for reaction intermediates. The theory calculations reveal that the introduction of Au core and alloying Pt with Sn both endow Pt with an appropriate d-band center, and thus effectively boosting the EOR activity.

Tuning the Selective Ethanol Oxidation on Tensile-Trained Pt(110) Surface by Ir Single Atoms

Development of efficient and robust electrocatalysts for complete oxidation of ethanol is critical for the commercialization of direct ethanol fuel cells. However, the complete oxidation of ethanol suffers from poor efficiency due to the low C1 pathway selectivity. Herein, single-atomic Ir (Ir₁ ) on hcp-PtPb/fcc-Pt core-shell hexagonal nanoplates (PtPb@PtIr₁ HNPs) enclosed by Pt(110) surface with a 7.2% tensile strain is constructed to drive complete electro-oxidation of ethanol. Benefiting from the construction of Ir₁ sites, the PtPb@PtIr₁ HNPs exhibit a Faraday efficiency of 57.93% for the C1 pathway, which is ≈8.3 times higher than that of the commercial Pt/C-JM. Furthermore, the PtPb@PtIr₁ HNPs show a top-ranked electro-activity achieving 45.1-fold and 56.3-fold higher than the specific and mass activities of Pt/C-JM, respectively. Meanwhile, the durability can be significantly enhanced by the construction of Ir₁ sites. Density functional theory calculations indicate that the strong synergy on the PtPb@PtIr₁ HNPs surface significantly promotes the breaking of CC bond of CH₂ CO* and facilitates CO oxidation and suppresses the deactivation of the catalyst. This work offers a unique single-atom approach using low-coordination active sites on shape-controlled nanocrystals to tune the selectivity and activity toward complicated catalytic reactions.

Highly Curved, Quasi-Single-Crystalline Mesoporous Metal Nanoplates Promote CC Bond Cleavage in Ethanol Oxidation Electrocatalysis

The ability to manipulate metal nanocrystals with well-defined morphologies and structures is greatly important in material chemistry, catalysis chemistry, nanoscience, and nanotechnology. Although 2D metals serve as interesting platforms, further manipulating them in solution with highly penetrated mesopores and ideal crystallinity remains a huge challenge. Here, an easy yet powerful synthesis strategy for manipulating the mesoporous structure and crystallinity of 2D metals in a controlled manner with cetyltrimethylammonium chloride as the mesopore-forming surfactant and extra iodine-ion as the structure/facet-selective agent is reported. This strategy allows for preparing an unprecedented type of 2D quasi-single-crystalline mesoporous nanoplates (SMPs) with highly curved morphology and controlled metal composition. The products, for example, PdCu SMPs, feature abundant undercoordinated sites, optimized electronic structures, excellent electron/mass transfers, and confined mesopore environments. Curved PdCu SMPs exhibit remarkable electrocatalytic activity of 6.09 A mg_Pd ^-1 and stability for ethanol oxidation reaction (EOR) compared with its counterpart catalysts and commercial Pd/C. More importantly, PdCu SMPs are highly selective for EOR electrocatalysis that dramatically promotes C-C bond cleavage with a superior C1 pathway selectivity as high as 72.1%.

Recent advances in fuel cell reaction electrocatalysis based on porous noble metal nanocatalysts

As the center of fuel cells, electrocatalysts play a crucial role in determining the conversion efficiency from chemical energy to electrical energy. Therefore, the development of advanced electrocatalysts with both high activity and stability is significant but challenging. Active site, mass transport, and charge transfer are three central factors influencing the catalytic performance of electrocatalysts. Endowed with rich available surface active sites, facilitated electron transfer and mass diffusion channels, and highly active components, porous noble metal nanomaterials are widely considered as promising electrocatalysts toward fuel cell-related reactions. The past decade has witnessed great achievements in the design and fabrication of advanced porous noble metal nanocatalysts in the field of electrocatalytic fuel oxidation reaction (FOR) and oxygen reduction reaction (ORR). Herein, the recent research advances regarding porous noble metal nanocatalysts for fuel cell-related reactions are reviewed. In the discussions, the inherent structural features of porous noble metal nanostructures for electrocatalytic reactions, advanced synthetic strategies for the fabrication of porous noble metal nanostructures, and the structure-performance relationships are also provided.

Laser-assisted synthesis of Au aerogel with high-index facets for ethanol oxidation

Gold (Au) can be used as an ideal metal electrocatalyst for ethanol and glucose oxidation reactions due to its high performance-to-cost ratio. In this paper, the Au aerogel with high-index facets was synthesized by using the laser ablation in liquid technology, which can improve the electrocatalytic activity of Au. The as-prepared Au aerogel showed excellent mass activity and specific activity toward ethanol oxidation reaction, which are 4.6 times and 2.1 times higher than Au/C, respectively. The 3D porous nature and rich defect of the Au aerogel provide more active sites. In addition, the high-index facets with under-coordinated atoms enhance the adsorption of ethanol and glucose molecules, thus improving the intrinsic catalytic activity of Au aerogel. The effect of high-index facets has also been investigated by density functional theory calculations. Furthermore, the Au aerogels also show good electrocatalytic activity and stability toward glucose oxidation reaction. These results are conducive to promote the practical application of Au in electrocatalysis.

Liquid Metal Interfacial Growth and Exfoliation to Form Mesoporous Metallic Nanosheets for Alkaline Methanol Electroreforming

Two-dimensional (2D) materials have spurred great interest in the field of catalysis due to their fascinating electronic and thermal transport properties. However, adding uniform mesopores to 2D metallic materials has remained a great challenge owing to the inherent high surface energy. Here, we introduce a generic liquid metal interfacial growth and exfoliation strategy to synthesize a library of penetrating mesoporous metallic nanosheets. The formation of liquid-metal/water interface promotes the adsorption of metal ion-encapsulated copolymer micelles, induces the self-limiting galvanic replacement reaction, and enables the exfoliation of products under mechanical agitation. These 2D mesoporous metallic nanosheets with large lateral size, narrow thickness distribution, and uniform perforated structure provide facilitated channels and abundant active sites for catalysis. Typically, the generated mesoporous PtRh nanosheets (mPtRh NSs) exhibit superior electroactivity and durability in hydrogen evolution reaction as well as methanol electrooxidation in alkaline media. Moreover, the constructed symmetric mPtRh NSs cell requires only a relative low electrolysis voltage to achieve methanol-assisted hydrogen production compared with traditional overall water electrolysis. The work reveals a specific growth pattern of noble metals at the liquid-metal/water interface and thus introduces a versatile strategy to form 2D penetrating mesoporous metallic nanomaterials with extensive high-performance applications.

PdNi/Ni Nanotubes Assembled by Mesoporous Nanoparticles for Efficient Alkaline Ethanol Oxidation Reaction

The optimization of structure and composition is essential to improve the performance of catalysts. Herein, mesoporous nanoparticles assembled PdNi/Ni nanotubes (mPdNi/Ni NTs) are successfully fabricated using nickel nanowires as sacrificial template. The combination of nanotubular structure with mesoporous nanoparticle morphology can provide facilitated transfer channels and sufficient active sites, allowing the full contact and reaction between catalysts and reactants. Therefore, the synthesized mPdNi/Ni NTs exhibited superior ethanol oxidation performance to mesoporous Pd nanotubes and commercial Pd black. This study proposes a rational strategy for the development of nanoparticle assembled nanotubes with surface mesoporous morphology, which can greatly improve catalytic performance in various electrocatalytic fields.

Highly Porous Pt2Ir Alloy Nanocrystals as a Superior Catalyst with High-Efficiency C-C Bond Cleavage for Ethanol Electrooxidation

Achieving high catalytic performance with high CO₂ selectivity is critical for commercialization of direct ethanol fuel cells. Here, we report carbon-supported highly porous Pt₂Ir alloy nanocrystals (p-Pt₂Ir/C) for an ethanol oxidation reaction (EOR) that displays nearly 7.2-fold enhancement in mass activity and promotes antipoisoning ability and durability for the EOR as compared with the commercial Pt/C-JM. Moreover, the catalyst exhibits high CO₂ selectivity, 3.4-fold at 0.65 V (vs. SCE) and 4.1-fold at 0.75 V (vs. SCE) higher as compared with the carbon-supported porous Pt nanocrystals (p-Pt/C). The highly porous structure is composed of interconnected one-dimensional (1D) rough branches with an average diameter of only 1.9 nm, largely promoting Pt utilization efficiency and accelerating mass transfer. The 1D rough branch surface exposed many atomic steps/corners endowed with abundant high activity sites. Alloying with Ir can significantly improve the antipoisoning ability, durability, and C-C bond cleavage ability, thereby evidently enhancing its EOR performance.

Nonmetal-doping of noble metal-based catalysts for electrocatalysis

In response to the shortage of fossil fuels, efficient electrochemical energy conversion devices are attracting increasing attention, while the limited electrochemical performance and high cost of noble metal-based electrode materials remain a daunting challenge. The electrocatalytic performance of electrode materials is closely bound with their intrinsic electronic/ionic states and crystal structures. Apart from the nanoscale design and conductive composite strategies, heteroatom doping, particularly for nonmetal doping (e.g., hydrogen, boron, sulfur, selenium, phosphorus, and tellurium), is also another effective strategy to greatly promote the intrinsic activity of the electrode materials by tuning their atomic structures. From the perspective of electrocatalytic reactions, the effective atomic structure regulation could induce additional active sites, create rich defects, and optimize the adsorption capability, thereby contributing to the promotion of the electrocatalytic performance of noble metal-based electrocatalysts. Encouraged by the great progress achieved in this field, we have reviewed recent advancements in nonmetal doping for electrocatalytic energy conversion. Specifically, the doping effect on the atomic structure and intrinsic electronic/ionic state is also systematically illustrated and the relationship with the electrocatalytic performance is also investigated. It is believed that this review will provide guidance for the development of more efficient electrocatalysts.

Trimetallic synergy in dendritic intermetallic PtSnBi nanoalloys for promoting electrocatalytic alcohol oxidation

Developing effective and robust novel electrocatalysts for direct alcohol fuel cells has been gaining much attention. However, the widely used Pt catalyst suffers from limitations including the sluggish kinetics, severe CO poisoning, and catalyst lost caused by aggregation and Ostwald ripening during alcohol oxidation reaction. Herein, dendritic intermetallic PtSnBi nanoalloys were synthesized via a facile hydrothermal approach with high electrocatalytic performance and enhanced CO resistance for methanol oxidation reaction (MOR) and ethanol oxidation reaction (EOR) owing to the synergism of the chosen three elements and unique three-dimensional morphology. Specifically, the PtSnBi nanoalloys display 4.6 and 6.7 times higher of mass activity (7.02 A mg^-1_Pt) and specific activity (16.65 mA cm^-2) toward MOR than those of commercial Pt/C, respectively. The mass activity of PtSnBi nanoalloys still retains 75.7% of the initial value after 800 cycles of stability test, superior to Pt/C (38.0%). The dual-functional effect of Sn, optimized electronic structure by the ligand effect, and unique atomic arrangement are responsible for the enhanced MOR activity and stability of PtSnBi nanoalloys. Furthermore, the PtSnBi nanoalloys with highlighted anti-CO poisoning capacity also improve the electrocatalytic performance toward EOR, indicating their great promise as broad energy electrocatalysts.