Photogating WS2 Photodetectors Using Embedded WSe2 Charge Puddles

Engineering Graphene Phototransistors for High Dynamic Range Applications

Phototransistors are light-sensitive devices featuring a high dynamic range, low-light detection, and mechanisms to adapt to different ambient light conditions. These features are of interest for bioinspired applications such as artificial and restored vision. In this work, we report on a graphene-based phototransistor exploiting the photogating effect that features picowatt- to microwatt-level photodetection, a dynamic range covering six orders of magnitude from 7 to 107 lux, and a responsivity of up to 4.7 × 103 A/W. The proposed device offers the highest dynamic range and lowest optical power detected compared to the state of the art in interfacial photogating and further operates air stably. These results have been achieved by a combination of multiple developments. For example, by optimizing the geometry of our devices with respect to the graphene channel aspect ratio and by introducing a semitransparent top-gate electrode, we report a factor 20-30 improvement in responsivity over unoptimized reference devices. Furthermore, we use a built-in dynamic range compression based on a partial logarithmic optical power dependence in combination with control of responsivity. These features enable adaptation to changing lighting conditions and support high dynamic range operation, similar to what is known in human visual perception. The enhanced performance of our devices therefore holds potential for bioinspired applications, such as retinal implants.

Intrinsic Defect-Driven Synergistic Synaptic Heterostructures for Gate-Free Neuromorphic Phototransistors

The optoelectronic synaptic devices based on two-dimensional (2D) materials offer great advances for future neuromorphic visual systems with dramatically improved integration density and power efficiency. The effective charge capture and retention are considered as one vital prerequisite to realizing the synaptic memory function. However, the current 2D synaptic devices are predominantly relied on materials with artificially-engineered defects or intricate gate-controlled architectures to realize the charge trapping process. These approaches, unfortunately, suffer from the degradation of pristine materials, rapid device failure, and unnecessary complication of device structures. To address these challenges, an innovative gate-free heterostructure paradigm is introduced herein. The heterostructure presents a distinctive dome-like morphology wherein a defect-rich Fe7S8 core is enveloped snugly by a curved MoS2 dome shell (Fe7S8@MoS2), allowing the realization of effective photocarrier trapping through the intrinsic defects in the adjacent Fe7S8 core. The resultant neuromorphic devices exhibit remarkable light-tunable synaptic behaviors with memory time up to ≈800 s under single optical pulse, thus demonstrating great advances in simulating visual recognition system with significantly improved image recognition efficiency. The emergence of such heterostructures foreshadows a promising trajectory for underpinning future synaptic devices, catalyzing the realization of high-efficiency and intricate visual processing applications.

Gate Voltage- and Bias Voltage-Tunable Staggered-Gap to Broken-Gap Transition Based on WSe2/Ta2NiSe5 Heterostructure for Multimode Optoelectronic Logic Gate

Two-dimensional (2D) materials with superior properties exhibit tremendous potential in developing next-generation electronic and optoelectronic devices. Integrating various functions into one device is highly expected as that endows 2D materials great promise for more Moore and more-than-Moore device applications. Here, we construct a WSe2/Ta2NiSe5 heterostructure by stacking the p-type WSe2 and the n-type narrow gap Ta2NiSe5 with the aim to achieve a multifunction optoelectronic device. Owing to the large interface potential barrier, the heterostructure device reveals a prominent diode feature with a large rectify ratio (7.6 × 104) and a low dark current (10-12 A). Especially, gate voltage- and bias voltage-tunable staggered-gap to broken-gap transition is achieved on the heterostructure device, which enables gate voltage-tunable forward and reverse rectifying features. As results, the heterostructure device exhibits superior self-powered photodetection properties, including a high detectivity of 1.08 × 1010 Jones and a fast response time of 91 μs. Additionally, the intrinsic structural anisotropy of Ta2NiSe5 endows the heterostructure device with strong polarization-sensitive photodetection and high-resolution polarization imaging. Based on these characteristics, a multimode optoelectronic logic gate is realized on the heterostructure via synergistically modulating the light on/off, polarization angle, gate voltage, and bias voltage. This work shed light on the future development of constructing high-performance multifunctional optoelectronic devices.

Ideal Photodetector Based on WS2/CuInP2S6 Heterostructure by Combining Band Engineering and Ferroelectric Modulation

Two-dimensional van der Waals (2D vdW) heterostructure photodetectors have garnered significant attention for their potential applications in next-generation optoelectronic systems. However, current 2D vdW photodetectors inevitably encounter compromises between responsivity, detectivity, and response time due to the absence of multilevel regulation for free and photoexcited carriers, thereby restricting their widespread applications. To address this challenge, we propose an efficient 2D WS2/CuInP2S6 vdW heterostructure photodetector by combining band engineering and ferroelectric modulation. In this device, the asymmetric conduction and valence band offsets effectively block the majority carriers (free electrons), while photoexcited holes are efficiently tunneled and rapidly collected by the bottom electrode. Additionally, the ferroelectric CuInP2S6 layer generates polarization states that reconfigure the built-in electric field, reducing dark current and facilitating the separation of photocarriers. Moreover, photoelectrons are trapped during long-distance lateral transport, resulting in a high photoconductivity gain. Consequently, the device achieves an impressive responsivity of 88 A W-1, an outstanding specific detectivity of 3.4 × 1013 Jones, and a fast response time of 37.6/371.3 μs. Moreover, the capability of high-resolution imaging under various wavelengths and fast optical communication has been successfully demonstrated using this device, highlighting its promising application prospects in future optoelectronic systems.

Ultrafast and Broad-Band Graphene Heterojunction Photodetectors with High Gain

Graphene possesses an exotic band structure that spans a wide range of important technological wavelength regimes for photodetection, all within a single material. Conventional methods aimed at enhancing detection efficiency often suffer from an extended response time when the light is switched off. The task of achieving ultrafast broad-band photodetection with a high gain remains challenging. Here, we propose a devised architecture that combines graphene with a photosensitizer composed of an alternating strip superstructure of WS2-WSe2. Upon illumination, n+-WS2 and p+-WSe2 strips create alternating electron- and hole-conduction channels in graphene, effectively overcoming the tradeoff between the responsivity and switch time. This configuration allows for achieving a responsivity of 1.7 × 107 mA/W, with an extrinsic response time of 3-4 μs. The inclusion of the superstructure booster enables photodetection across a wide range from the near-ultraviolet to mid-infrared regime and offers a distinctive photogating route for high responsivity and fast temporal response in the pursuit of broad-band detection.

Negative Photoresponse Switching via Electron-Hole Recombination at The Type III Junction of MoTe2 Channel/SnS2 Top Layer

Extensive study on 2D van der Waals (vdW) heterojunctions has primarily focused on PN diodes for fast-switching photodetection, while achieving the same from 2D channel phototransistors is rare despite their other advantages. Here, a high-speed phototransistor featuring a type III junction between p-MoTe2 channel and n-SnS2 top layer is designed. The photodetecting device operates with a basis of negative photoresponse (NPR), which originates from the recombination of photoexcited electrons in n-SnS2 and accumulated holes in the p-MoTe2 channel. For the NPR to occur, high-energy photons capable of exciting SnS2 (band gap ≈2.2 eV) are found to be effective because lower-energy photons simply penetrate the SnS2 top layer only to excite MoTe2 , leading to normal positive photoresponse (PPR) which is known to be slow due to the photogating effects. The NPR transistor showcases 0.5 ms fast photoresponses and a high responsivity over 5000 A W-1 . More essentially, such carrier recombination mechanism is clarified with three experimental evidences. The phototransistor is finally modified with Au contact on n-SnS2 , to be a more practical device displaying voltage output. Three different photo-logic states under blue, near infrared (NIR), and blue-NIR mixed photons are demonstrated using the voltage signals.

High-Performance and Polarization-Sensitive Imaging Photodetector Based on WS2 /Te Tunneling Heterostructure

Next-generation imaging systems require photodetectors with high sensitivity, polarization sensitivity, miniaturization, and integration. By virtue of their intriguing attributes, emerging 2D materials offer innovative avenues to meet these requirements. However, the current performance of 2D photodetectors is still below the requirements for practical application owing to the severe interfacial recombination, the lack of photoconductive gain, and insufficient photocarrier collection. Here, a tunneling dominant imaging photodetector based on WS₂ /Te heterostructure is reported. This device demonstrates competitive performance, including a remarkable responsivity of 402 A W^-1 , an outstanding detectivity of 9.28 × 10¹³ Jones, a fast rise/decay time of 1.7/3.2 ms, and a high photocurrent anisotropic ratio of 2.5. These outstanding performances can be attributed to the type-I band alignment with carrier transmission barriers and photoinduced tunneling mechanism, allowing reduced interfacial trapping effect, effective photoconductive gains, and anisotropic collection of photocarriers. Significantly, the constructed photodetector is successfully integrated into a polarized light imaging system and an ultra-weak light imaging system to illustrate the imaging capability. These results suggest the promising application prospect of the device in future imaging systems.

Revealing the origin of PL evolution of InSe flake induced by laser irradiation

Two-dimensional InSe has been considered as a promising candidate for novel optoelectronic devices owing to large electron mobility and a near-infrared optical band gap. However, its widespread applications suffer from environmental instability. A lot of theoretical studies on the degradation mechanism of InSe have been reported whereas the experimental proofs are few. Meanwhile, the role of the extrinsic environment is still obscure during the degradation. As a common technique of studying the degradation mechanism of 2D materials, laser irradiation exhibits many unique advantages, such as being fast, convenient, and offering in situ compatibility. Here, we have developed a laser-treated method, which involves performing repeated measurements at the same point while monitoring the evolution of the resulting PL, to systematically study the photo-induced degradation process of InSe. Interestingly, we observe different evolution behavior of PL intensity under weak irradiation and strong irradiation. Our experimental results indicate the vacancy passivation and degrading effect simultaneously occurring in InSe under a weak laser irradiation, resulting in the PL increasing first and then decreasing during the measurement. Meanwhile we also notice that the passivation has a stronger effect on the PL than the degrading effect of weak oxidation. In contrast, under a strong laser irradiation, the InSe suffers serious destruction caused by excess heating and intense oxidation. This leads to a direct decrease of PL and corresponding oxidative products. Our work provides a reliable experimental supplement to the photo oxidation study of InSe and opens up a new avenue to regulate the PL of InSe.

Diverse field-effect characteristics and negative differential transconductance in a graphene/WS2/Au phototransistor with a Ge back gate

We propose an infrared-sensitive negative differential transconductance (NDT) phototransistor based on a graphene/WS₂/Au double junction with a SiO₂/Ge gate. By changing the drain bias, diverse field-effect characteristics can be achieved. Typical p-type and n-type behavior is obtained under negative and positive drain bias, respectively. And NDT behavior is observed in the transfer curves under positive drain bias. It is believed to originate from competition between the top and bottom channel currents in stepped layers of WS₂ at different gate voltages. Moreover, this phototransistor shows a gate-modulated rectification ratio of 0.03 to 88.3. In optoelectronic experiments, the phototransistor exhibits a responsivity of 2.76 A/W under visible light at 532 nm. By contrast, an interesting negative responsivity of -29.5 µA/W is obtained and the NDT vanishes under illumination by infrared light at 1550 nm. A complementary inverter based on two proposed devices of the same structure is constructed. The maximum voltage gain of the complementary inverter reaches 0.79 at a supply voltage of 1.5 V. These results demonstrate a new method of realizing next-generation two- and three-dimensional electronic and optoelectronic multifunctional devices.

Integration of photovoltaic and photogating effects in a WSe2/WS2/p-Si dual junction photodetector featuring high-sensitivity and fast-response

Two-dimensional (2D) material-based van der Waals (vdW) heterostructures with exotic semiconducting properties have shown tremendous potential in next-generation photovoltaic photodetectors. Nevertheless, these vdW heterostructure devices inevitably suffer from a compromise between high sensitivity and fast response. Herein, an ingenious photovoltaic photodetector based on a WSe₂/WS₂/p-Si dual-vdW heterojunction is demonstrated. First-principles calculations and energy band profiles consolidate that the photogating effect originating from the bottom vdW heterojunction not only strengthens the photovoltaic effect of the top vdW heterojunction, but also suppresses the recombination of photogenerated carriers. As a consequence, the separation of photogenerated carriers is facilitated and their lifetimes are extended, resulting in higher photoconductive gain. Coupled with these synergistic effects, this WSe₂/WS₂/p-Si device exhibits both high sensitivity (responsivity of 340 mA W^-1, a light on/off ratio greater than 2500, and a detectivity of 3.34 × 10¹¹ Jones) and fast response time (rise/decay time of 657/671 μs) under 405 nm light illumination in self-powered mode. Finally, high-resolution visible-light and near-infrared imaging capabilities are demonstrated by adopting this dual-heterojunction device as a single pixel, indicating its great application prospects in future optoelectronic systems.

Boosting the Sensitivity of WSe2 Phototransistor via Janus Interfaces with 2D Perovskite and Ferroelectric Layers

Hybrid systems have recently attracted increasing attention, which combine the special attributes of each constitute and create interesting functionalities through multiple heterointerface interactions. Here, we design a two-dimensional (2D) hybrid phototransistor utilizing Janus-interface engineering, in which the WSe₂ channel combines light-sensitive perovskite and spontaneously polarized ferroelectrics, achieving collective ultrasensitive detection performance. The top perovskite (BA₂(MA)₃Pb₄I₁₃) layer can absorb the light efficiently and provide generous photoexcited holes to WSe₂. WSe₂ exhibit p-type semiconducting states of different degrees due to the selective light-operated doping effect, which also enables the ultrahigh photocurrent of the device. The bottom ferroelectric (Hf_0.5Zr_0.5O₂) layer dramatically decreases the dark current, which should be attributed to the ferroelectric polarization assisted charge trapping effect and improved gate control. As a whole, our phototransistors show excellent photoelectric performances across the ultraviolet to near-infrared range (360-1050 nm), including an ultrahigh ON/OFF current ratio > 10⁹ and low noise-equivalent power of 1.3 fW/Hz^1/2, all of which are highly competitive in 2D semiconductor-based optoelectronic devices. In particular, the devices show excellent weak light detection ability, where the distinguishable photoswitching signal is obtained even under a record-low light intensity down to 1.6 nW/cm², while showing a high responsivity of 2.3 × 10⁵ A/W and a specific detectivity of 4.1 × 10¹⁴ Jones. Our work demonstrates that Janus-interface design makes the upper and lower interfaces complement each other for the joint advancement into high-performance optoelectronic applications, providing a picture to realize the integrated engineering on carrier dynamics by light irradiation, electric field, interfacial trapping, and band alignment.

Optoelectronic properties and applications of two-dimensional layered semiconductor van der Waals heterostructures: perspective from theory

Van der Waals heterostructures (vdWHs) which combine two different materials together have attracted extensive research attentions due to the promising applications in optoelectronic and electronic devices, the investigations from theoretical simulations can not only predict the novel properties and the interfacial coupling, but also provide essential guidance for experimental verification and fabrications. This review summarizes the recent theoretical studies on electronic and optical properties of two-dimensional semiconducting vdWHs. The characteristics of different band alignments are discussed, together with the optoelectronic modulations from external fields and the promising applications in solar cells, tunneling field-effect transistors and photodetectors. At the end of the review, the further perspective and possible research problems of the vdWHs are also presented.

Patterning and doping of transition metals in tungsten dichalcogenides

Substitutional transition metal doping in two-dimensional (2D) layered dichalcogenides is of fundamental importance in manipulating their electrical, excitonic, magnetic, and catalytic properties through the variation of the d-electron population. Yet, most doping strategies are spatially global, with dopants embedded concurrently during the synthesis. Here, we report an area-selective doping scheme for W-based dichalcogenide single layers, in which pre-patterned graphene is used as a reaction mask in the high-temperature substitution of the W sublattice. The chemical inertness of the thin graphene layer can effectively differentiate the spatial doping reaction, allowing for local manipulation of the host 2D materials. Using graphene as a mask is also beneficial in the sense that it also acts as an insertion layer between the contact metal and the doped channel, capable of depinning the Fermi level for low contact resistivity. Tracing doping by means of chalcogen labelling, deliberate Cr embedment is found to become energetically favorable in the presence of chalcogen deficiency, assisting the substitution of the W sublattice in the devised chemical vapor doping scheme. Atomic characterization using scanning transmission electron microscopy (STEM) shows that the dopant concentration is controllable and varies linearly with the reaction time in the current doping approach. Using the same method, other transition metal atoms such as Mo, V, and Fe can also be doped in the patterned area.

Light-Tunable Polarity and Erasable Physisorption-Induced Memory Effect in Vertically Stacked InSe/SnS2 Self-Powered Photodetector

van der Waals heterojunctions with tunable polarity are being actively explored for more Moore and more-than-Moore device applications, as they can greatly simplify circuit design. However, inadequate control over the multifunctional operational states is still a challenge in their development. Here, we show that a vertically stacked InSe/SnS₂ van der Waals heterojunction exhibits type-II band alignment, and its polarity can be tuned by an external electric field and by the wavelength and intensity of an illuminated light source. Moreover, such SnS₂/InSe diodes are self-powered broadband photodetectors with good performance. The self-powered performance can be further enhanced significantly with gas adsorption, and the device can be quickly restored to the state before gas injection using a gate voltage pulse. Our results suggest a way to achieve and design multiple functions in a single device with multifield coupling of light, electrical field, gas, or other external stimulants.

Rational Design of WSe2 /WS2 /WSe2 Dual Junction Phototransistor Incorporating High Responsivity and Detectivity

The excellent semiconducting properties and ultrathin morphological characteristics allow van der Waals (vdW) heterostructures based on 2D materials to be promising channel materials for the next-generation optoelectronic devices, especially in photodetectors. Although various 2D heterostructure-based photodetectors have been developed, the unavoidable trade-off between responsivity and detectivity remains a critical issue for these devices. Here, an ingenious phototransistor based on WSe₂ /WS₂ /WSe₂ dual-vdW heterostructures is constructed, performing both high responsivity and detectivity. In the charge neutrality point (gate voltage of -15 V and bias voltage of 1 V), this device demonstrates a pronounced photosensitivity, accompanying with high detectivity of 1.9 × 10¹⁴  Jones, high responsivity of 35.4 A W^-1 , and fast rise/fall time of 3.2/2.5 ms at 405 nm with power density of 60 µW cm^-2 . Density functional theory calculations, energy band profiles, and optoelectronic characteristics jointly verify that the high performance is ascribed to the distinctive device design, which not only facilitates the separation of photogenerated carriers but also produces a strong photogating effect. As a feasible application, an automotive radar system is demonstrated, proving that the device has considerable potential for application in vehicle intelligent assisted driving.

Wafer-Scale Synthesis of 2D Dirac Heterostructures for Self-Driven, Fast, Broadband Photodetectors

Type-II Dirac semimetal platinum ditelluride (PtTe₂) is a promising functional material for photodetectors because of its specially tilted Dirac cones, strong light absorption, and high carrier mobilities. The stack of two-dimensional (2D) Dirac heterostructures consisting of PtTe₂ and graphene could overcome the limit of detection range and response time occurring in the heterostructures of graphene and other low-mobility and large-gap transition metal dichalcogenides (TMDs). Here, we report an approach for achieving highly controllable, wafer-scale production of 2D Dirac heterostructures of PtTe₂/graphene with tunable thickness, variable size, and CMOS compatibility. More importantly, the optimized recipes achieve the exact stoichiometric ratio of 1:2 for Pt and Te elements without contaminating the underlayer graphene film. Because of the built-in electric field at the junction area, the photodetectors based on the PtTe₂/graphene heterostructure are self-driven with a broadband photodetection from 405 to 1850 nm. In particular, the photodetectors have a high responsivity of up to ∼0.52 AW^-1 (without bias) and a fast response time of ∼8.4 μs. Our work demonstrated an approach to synthesizing hybrid 2D Dirac heterostructures, which can be applied in the integration of on-chip, CMOS-compatible photodetectors with near-infrared detection, high sensitivity, and low energy consumption.

Ultrastable tip-enhanced hyperspectral optical nanoimaging for defect analysis of large-sized WS2 layers

Optical nanoimaging techniques, such as tip-enhanced Raman spectroscopy (TERS), are nowadays indispensable for chemical and optical characterization in the entire field of nanotechnology and have been extensively used for various applications, such as visualization of nanoscale defects in two-dimensional (2D) materials. However, it is still challenging to investigate micrometer-sized sample with nanoscale spatial resolution because of severe limitation of measurement time due to drift of the experimental system. Here, we achieved long-duration TERS imaging of a micrometer-sized WS₂ sample for 6 hours in a reproducible manner. Our ultrastable TERS system enabled to reveal the defect density on the surface of tungsten disulfide layers in large area equivalent to the device scale. It also helped us to detect rare defect-related optical signals from the sample. The present study paves ways to evaluate nanoscale defects of 2D materials in large area and to unveil remarkable optical and chemical properties of large-sized nanostructured materials.

Strategies for Controlled Growth of Transition Metal Dichalcogenides by Chemical Vapor Deposition for Integrated Electronics

In recent years, transition metal dichalcogenide (TMD)-based electronics have experienced a prosperous stage of development, and some considerable applications include field-effect transistors, photodetectors, and light-emitting diodes. Chemical vapor deposition (CVD), a typical bottom-up approach for preparing 2D materials, is widely used to synthesize large-area 2D TMD films and is a promising method for mass production to implement them for practical applications. In this review, we investigate recent progress in controlled CVD growth of 2D TMDs, aiming for controlled nucleation and orientation, using various CVD strategies such as choice of precursors or substrates, process optimization, and system engineering. We then survey different patterning methods, such as surface patterning, metal precursor patterning, and postgrowth sulfurization/selenization/tellurization, to mass produce heterostructures for device applications. With these strategies, various well-designed architectures, such as wafer-scale single crystals, vertical and lateral heterostructures, patterned structures, and arrays, are achieved. In addition, we further discuss various electronics made from CVD-grown TMDs to demonstrate the diverse application scenarios. Finally, perspectives regarding the current challenges of controlled CVD growth of 2D TMDs are also suggested.

Band Alignment Engineering by Twist Angle and Composition Modulation for Heterobilayer

Atomically thin monolayer semiconducting transition metal dichalcogenides (TMDs), exhibiting direct band gap and strong light-matter interaction, are promising for optoelectronic devices. However, an efficient band alignment engineering method is required to further broaden their practical applications as versatile optoelectronics. In this work, the band alignment of two vertically stacked monolayer TMDs using the chemical vapor deposition (CVD) method is effectively tuned by two strategies: 1) formulating the compositions of MoS_2(1-x) Se_2x alloys, and 2) varying the twist angles of the stacked heterobilayer structures. Photoluminescence (PL) results combined with density functional theory (DFT) calculation show that by changing the alloy composition, a continuously tunable band alignment and a transition of type II-type I-type II band alignment of TMD heterobilayer is achieved. Moreover, only at moderate (10°-50°) twist angles, a PL enhancement of 28%-110% caused by the type I alignment is observed, indicating that the twist angle is coupled with the global band structure of heterobilayer. A heterojunction device made with MoS_0.76 Se_1.24 /WS₂ of 14° displays a significantly high photoresponsivity (55.9 A W^-1 ), large detectivity (1.07 × 10¹⁰ Jones), and high external quantum efficiency (135%). These findings provide engineering tools for heterostructure design for their application in optoelectronic devices.

Enhancing and Broadening the Photoresponse of Monolayer MoS2 Based on Au Nanoslit Array

Two-dimensional molybdenum disulfide (MoS₂), featuring unique optoelectronic properties, has attracted tremendous interest in developing novel photodetection devices. However, the limited light absorption and small carrier transport rate of the monolayer MoS₂ result in low photoresponse, and the large band gap limits its detection range in the visible region. In this study, we propose a nanoslit array-MoS₂ hybrid device architecture with enhanced and broadened photoresponse. The nanoslit array can localize free-space light to achieve strong interactions with MoS₂, and acts as the channel to improve charge transport. As a result, the Au nanoslit array-MoS₂ hybrid detector exhibits a nearly 100-fold increase in photocurrent compared to the pure MoS₂ device. More importantly, the hybrid device can broaden the photoresponse to the optical communication band of 1550 nm which is lower than the band gap of MoS₂, by efficiently utilizing the hot carriers generated by the Au nanoslits. The experimental results are supported by both theoretical analysis and numerical simulation. Since our demonstration leverages the engineering of the hybrid photodetectors with metal nanostructures rather than semiconductor materials, it should be universal and applicable to other devices for broadband, high-efficiency photoelectric conversion.

Lateral layered semiconductor multijunctions for novel electronic devices

Layered semiconductors, represented by transition metal dichalcogenides, have attached extensive attention due to their unique and tunable electrical and optical properties. In particular, lateral layered semiconductor multijunctions, including homojunctions, heterojunctions, hybrid junctions and superlattices, present a totally new degree of freedom in research on electronic devices beyond traditional materials and their structures, providing unique opportunities for the development of new structures and operation principle-based high performance devices. However, the advances in this field are limited by the precise synthesis of high-quality junctions and greatly hampered by ambiguous device performance limits. Herein, we review the recent key breakthroughs in the design, synthesis, electronic structure and property modulation of lateral semiconductor multijunctions and focus on their application-specific devices. Specifically, the synthesis methods based on different principles, such as chemical and external source-induced methods, are introduced stepwise for the controllable fabrication of semiconductor multijunctions as the basics of device application. Subsequently, their structure and property modulation are discussed, including control of their electronic structure, exciton dynamics and optical properties before the fabrication of lateral layered semiconductor multijunction devices. Precise property control will potentially result in outstanding device performances, including high-quality diodes and FETs, scalable logic and analog circuits, highly efficient optoelectronic devices, and unique electrochemical devices. Lastly, we focus on several of the most essential but unresolved debates in this field, such as the true advantages of few-layer vs. monolayer multijunctions, how sharp the interface should be for specific functional devices, and the superiority of lateral multijunctions over vertical multijunctions, highlighting the next-phase strategy to enhance the performance potential of lateral multijunction devices.

Enhanced Photogating Effect in Graphene Photodetectors via Potential Fluctuation Engineering

The photogating effect in hybrid structures has manifested itself as a reliable and promising approach for photodetectors with ultrahigh responsivity. A crucial factor of the photogating effect is the built-in potential at the interface, which controls the separation and harvesting of photogenerated carriers. So far, the primary efforts of designing the built-in potential rely on discovering different materials and developing multilayer structures, which may raise problems in the compatibility with the standard semiconductor production line. Here, we report an enhanced photogating effect in a monolayer graphene photodetector based on a structured substrate, where the built-in potential is established by the mechanism of potential fluctuation engineering. We find that the enhancement factor of device responsivity is related to a newly defined parameter, namely, fluctuation period rate (P_f). Compared to the device without a nanostructured substrate, the responsivity of the device with an optimized P_f is enhanced by 100 times, reaching a responsivity of 240 A/W and a specific detectivity, D*, of 3.4 × 10¹² Jones at 1550 nm wavelength and room temperature. Our experimental results are supported by both theoretical analysis and numerical simulation. Since our demonstration of the graphene photodetectors leverages the engineering of structures with monolayer graphene rather than materials with a multilayer complex structure. it should be universal and applicable to other hybrid photodetectors.

Orbital Gating Driven by Giant Stark Effect in Tunneling Phototransistors

Conventional gating in transistors uses electric fields through external dielectrics that require complex fabrication processes. Various optoelectronic devices deploy photogating by electric fields from trapped charges in neighbor nanoparticles or dielectrics under light illumination. Orbital gating driven by giant Stark effect is demonstrated in tunneling phototransistors based on 2H-MoTe₂ without using external gating bias or slow charge trapping dynamics in photogating. The original self-gating by light illumination modulates the interlayer potential gradient by switching on and off the giant Stark effect where the d_z 2-orbitals of molybdenum atoms play the dominant role. The orbital gating shifts the electronic bands of the top atomic layer of the MoTe₂ by up to 100 meV, which is equivalent to modulation of a carrier density of 7.3 × 10¹¹ cm^-2 by electrical gating. Suppressing conventional photoconductivity, the orbital gating in tunneling phototransistors achieves low dark current, practical photoresponsivity (3357 AW^-1 ), and fast switching time (0.5 ms) simultaneously.

Monolayer WS2 Lateral Homosuperlattices with Two-dimensional Periodic Localized Photoluminescence

Homojunctions and homosuperlattices are essential structures and have been widely explored for use in advanced electronic and optoelectronic devices. However, artificially manipulating crystalline phases in two-dimensional (2D) monolayers is still challenging, especially when attempting to engineer lateral homogeneous junctions in a single monolayer of transition metal dichalcogenides (TMDs). Herein, we demonstrate a lateral homosuperlattice (MLHS) with alternating 1T and 2H domains in a 2D WS₂ monolayer plane. In MLHSs, the 2H domains, which are laterally localized and isolated by potential wells, manifest junction interfaces and irradiated photoluminescence (PL) with a lateral periodic distribution in the two-dimensional plane. The studies on MLHSs here can provide further understanding of lateral homojunctions and homosuperlattices in a monolayer plane, providing an alternative route to modulate optical and electronic behaviors in TMD monolayers.

WSe2/WS2 Heterobilayer Nonvolatile Memory Device with Boosted Charge Retention

A two-dimensional (2D) nonvolatile memory device architecture to improve the long-term charge retention with the minimum charge loss without compromising storage capacity and the extinction ratio for practical applications has been an imminent demand. To address the current issue, we adopted a novel type-II band-aligned heterobilayer channel comprising vertically stacked monolayer WSe₂ nanodots on monolayer WS₂. The band offset modulation leads to electron doping from WSe₂ nanodots into the WS₂ channel without any external driving electric field. As a result, the tested device outperformed with a memory window as high as 34 V and a negligible charge loss of 7% in a retention period of 10 years while maintaining a high extinction ratio of 10⁶. The doping technique presented in this work provides a feasible route to modulate the electrical properties of 2D channel materials without hampering charge transport, paving the way for high-performance 2D memory devices.

Ultrafast and Highly Sensitive Dual-Channel FET Photodetector Based on a Two-Dimensional MoS2 Homojunction

Two-dimensional transition metal dichalcogenide-based phototransistors have been intensively studied in recent years due to their high detection rate and flexibility. However, the photogating effect, usually appearing in the devices, leads to a poor transient photoresponse, which slows down the imaging rate of the camera based on the devices. Here, we demonstrate a dual-channel two-dimensional field-effect phototransistor composed of a vertical molybdenum disulfide (MoS₂) p-n homojunction as the sensitizing channel layer. Owing to the effective separation by the vertical built-in electric field and rapid migration of photoexcited electrons and holes in the separated channels, the fabricated dual-channel FET device simultaneously exhibits prominent responsivity and greatly improved time response in comparison to the pristine MoS₂ FET detectors. Excellent device performance has been achieved, with a responsivity of 3.4 × 10⁴ A/W at a source-drain voltage (V_DS) of 1 V, corresponding to a detectivity (D*) of 1.9 × 10¹³ Jones@532 nm and a gain of more than 10⁵ electrons per photon, an external quantum efficiency of 9.6%, and a response time of tens of milliseconds. Especially, the response time of the dual-channel FET device is 3 orders of magnitude faster than that of the pristine device. Our results provide a new way to overcome the inherent photogating drawback of two-dimensional FET optoelectronic devices and to develop a related high frame rate imaging system.

Photovoltaic Field-Effect Photodiodes Based on Double van der Waals Heterojunctions

High performance photodetectors based on van der Waals heterostructures (vdWHs) are crucial to developing micro-nano-optoelectronic devices. However, reports show that it is difficult to balance fast response and high sensitivity. In this work, we design a photovoltaic field-effect photodiode (PVFED) based on the WSe₂/MoS₂/WSe₂ double vdWHs, where the photovoltage that originated from one vdWH modulates the optoelectronic characteristics of another vdWH. The proposed photodiode exhibits an excellent self-powered ability with a high responsivity of 715 mA·W^-1 and fast response time of 45 μs. This work demonstrates an efficient method that optimizes the photoelectric performance of vdWH by introducing the photovoltaic field effect.

Charge-Transfer Effect and Enhanced Photoresponsivity of WS2- and MoSe2-Based Field Effect Transistors with π-Conjugated Polyelectrolyte

The characteristics of field effect transistors (FETs) fabricated using two-dimensional (2D) transition-metal dichalcogenides (TMDCs) can be modulated by surface treatment of the active layers. In this study, an ionic π-conjugated polyelectrolyte, poly(9,9-bis(4'-sulfonatobutyl)fluorene-alt-1,4-phenylene) potassium (FPS-K), was used for the surface treatment of MoSe₂ and WS₂ FETs. The photoluminescence (PL) intensities of monolayer (1L)-MoSe₂ and 1L-WS₂ clearly decreased, and the PL peaks were red-shifted after FPS-K treatment, suggesting a charge-transfer effect. In addition, the n-channel current of both the MoSe₂ and WS₂ FETs increased and the threshold voltage (V_th) shifted negatively after FPS-K treatment owing to the charge-transfer effect. The photoresponsivity of the MoSe₂ FET under light irradiation (λ_ex = 455 nm) increased considerably, from 5300 A W^-1 to approximately 10 000 A W^-1, after FPS-K treatment, and similar behavior was observed in the WS₂ FET. The results can be explained in terms of the increase in electron concentration due to photogating. The external quantum efficiency and photodetectivity of both FETs were also enhanced by the charge-transfer effect resulting from surface treatment with FPS-K containing mobile cations (K⁺) and fixed anions (SO₃^-), as well as by the photogating effect. The variation in charge-carrier density due to the photogating and charge-transfer effects is estimated to be approximately 2 × 10¹² cm^-2. The results suggest that π-conjugated polyelectrolytes such as FPS-K can be a promising candidate for the passivation of TMDC-based FETs and obtaining enhanced photoresponsivity.

The Photodetectors Based on Lateral Monolayer MoS2/WS2 Heterojunctions

Monolayer transition metal dichalcogenides (TMDs) show promising potential for next-generation optoelectronics due to excellent light capturing and photodetection capabilities. Photodetectors, as important components of sensing, imaging and communication systems, are able to perceive and convert optical signals to electrical signals. Herein, the large-area and high-quality lateral monolayer MoS2/WS2 heterojunctions were synthesized via the one-step liquid-phase chemical vapor deposition approach. Systematic characterization measurements have verified good uniformity and sharp interfaces of the channel materials. As a result, the photodetectors enhanced by the photogating effect can deliver competitive performance, including responsivity of ~ 567.6 A/W and detectivity of ~ 7.17 × 1011 Jones. In addition, the 1/f noise obtained from the current power spectrum is not conductive to the development of photodetectors, which is considered as originating from charge carrier trapping/detrapping. Therefore, this work may contribute to efficient optoelectronic devices based on lateral monolayer TMD heterostructures.

Preparation Engineering of Two-Dimensional Heterostructures via Bottom-Up Growth for Device Applications

Two-dimensional heterostructures with tremendous electronic and optoelectronic properties hold great promise for nanodevice integrations and applications owing to the wide tunable characteristics. Toward this end, developing construction strategies in allusion to large-scale production of high-quality heterostructures is critical. The mainstream preparation routes are representatively classified into two categories of top-down and bottom-up approaches. Nonetheless, the relatively low reproductivity and the limitation for lateral heterostructure formations of top-down methods at the present stage inherently impeded their further developments. To surmount these obstacles, assembling heterostructures via miscellaneous bottom-up preparation protocols has emerged as a potential solution, attributed to the controllability and clean interface. Three typical approaches of chemical/physical vapor deposition, solution synthesis, and growth under ultrahigh vacuum conditions have shown promise due to the possibilities for preparing heterostructures with predesigned structures, clean interfaces, and the like. Therefore, bottom-up preparation engineering of heterostructures in two dimensions for further device applications is of vital importance. Moreover, heterostructure integrations by these methods have experienced a period of flourishing development in the past few years. In this review, the classical bottom-up growth routes, characterization methods, and latest progress of diverse heterostructures and further device applications are overviewed. Finally, the challenges and opportunities are discussed.

Scalable Synthesis of Tungsten Disulfide Nanosheets for Alkali-Acid Electrocatalytic Sulfion Recycling and H2 Generation

WS₂ nanosheets hold great promise for a variety of applications yet faces a grand challenge in terms of large-scale synthesis. We report a reliable, scalable, and high-yield (>93 %) synthetic strategy to fabricate WS₂ nanosheets, which exhibit highly desirable electrocatalytic properties toward both the alkaline sulfion (S^2- ) oxidation reaction (SOR) and the acidic hydrogen evolution reaction (HER). The findings prompted us to develop a hybrid alkali-acid electrochemical cell with the WS₂ nanosheets as bifunctional electrode catalysts of alkaline anodic SOR and acidic cathodic HER. The proof-of-concept device holds promise for self-power or low-electricity electrolytic H₂ generation and environmentally friendly recycling of sulfion with enhanced electron utilization efficiency.

Embedment of Multiple Transition Metal Impurities into WS2 Monolayer for Bandstructure Modulation

Band structure by design in 2D layered semiconductors is highly desirable, with the goal to acquire the electronic properties of interest through the engineering of chemical composition, structure, defect, stacking, or doping. For atomically thin transition metal dichalcogenides, substitutional doping with more than one single type of transition metals is the task for which no feasible approach is proposed. Here, the growth of WS₂ monolayer is shown codoped with multiple kinds of transition metal impurities via chemical vapor deposition controlled in a diffusion-limited mode. Multielement embedment of Cr, Fe, Nb, and Mo into the host lattice is exemplified. Abundant impurity states thus generate in the bandgap of the resultant WS₂ and provide a robust switch of charging/discharging states upon sweep of an electric filed. A profound memory window exists in the transfer curves of doped WS₂ field-effect transistors, forming the basis of binary states for robust nonvolatile memory. The doping technique presented in this work brings one step closer to the rational design of 2D semiconductors with desired electronic properties.

Memristive Artificial Synapses for Neuromorphic Computing

Neuromorphic computing simulates the operation of biological brain function for information processing and can potentially solve the bottleneck of the von Neumann architecture. This computing is realized based on memristive hardware neural networks in which synaptic devices that mimic biological synapses of the brain are the primary units. Mimicking synaptic functions with these devices is critical in neuromorphic systems. In the last decade, electrical and optical signals have been incorporated into the synaptic devices and promoted the simulation of various synaptic functions. In this review, these devices are discussed by categorizing them into electrically stimulated, optically stimulated, and photoelectric synergetic synaptic devices based on stimulation of electrical and optical signals. The working mechanisms of the devices are analyzed in detail. This is followed by a discussion of the progress in mimicking synaptic functions. In addition, existing application scenarios of various synaptic devices are outlined. Furthermore, the performances and future development of the synaptic devices that could be significant for building efficient neuromorphic systems are prospected.

van der Waals Epitaxy of Soft Twisted Bilayers: Lattice Relaxation and Mass Density Waves

Interfaces comprising incommensurate or twisted hexagonal lattices are ubiquitous and of great interest, from adsorbed organic/inorganic interfaces in electronic devices, to superlubricants, and more recently to van der Waals bilayer heterostructures (vdWHs) of graphene and other 2D materials that demonstrate a range of properties such as superconductivity and ferromagnetism. Here we show how growth of 2D crystalline domains of soft block copolymers (BCPs) on patterned hard hexagonal lattices provide fundamental insights into van der Waals heteroepitaxy. At moderate registration forces, it is experimentally found that these BCP-hard lattice vdWHs do not adopt a simple moiré superstructure, but instead adopt local structural relaxations known as mass density waves (MDWs). Simulations reveal that MDWs are a primary mechanism of energy minimization and are the origin of the observed preferential twist angle between the lattices.

A review of molybdenum disulfide (MoS2) based photodetectors: from ultra-broadband, self-powered to flexible devices

Two-dimensional transition metal dichalcogenides (2D TMDs) have attracted much attention in the field of optoelectronics due to their tunable bandgaps, strong interaction with light and tremendous capability for developing diverse van der Waals heterostructures (vdWHs) with other materials. Molybdenum disulfide (MoS2) atomic layers which exhibit high carrier mobility and optical transparency are very suitable for developing ultra-broadband photodetectors to be used from surveillance and healthcare to optical communication. This review provides a brief introduction to TMD-based photodetectors, exclusively focused on MoS2-based photodetectors. The current research advances show that the photoresponse of atomic layered MoS2 can be significantly improved by boosting its charge carrier mobility and incident light absorption via forming MoS2 based plasmonic nanostructures, halide perovskites-MoS2 heterostructures, 2D-0D MoS2/quantum dots (QDs) and 2D-2D MoS2 hybrid vdWHs, chemical doping, and surface functionalization of MoS2 atomic layers. By utilizing these different integration strategies, MoS2 hybrid heterostructure-based photodetectors exhibited remarkably high photoresponsivity raging from mA W-1 up to 1010 A W-1, detectivity from 107 to 1015 Jones and a photoresponse time from seconds (s) to nanoseconds (10-9 s), varying by several orders of magnitude from deep-ultraviolet (DUV) to the long-wavelength infrared (LWIR) region. The flexible photodetectors developed from MoS2-based hybrid heterostructures with graphene, carbon nanotubes (CNTs), TMDs, and ZnO are also discussed. In addition, strain-induced and self-powered MoS2 based photodetectors have also been summarized. The factors affecting the figure of merit of a very wide range of MoS2-based photodetectors have been analyzed in terms of their photoresponsivity, detectivity, response speed, and quantum efficiency along with their measurement wavelengths and incident laser power densities. Conclusions and the future direction are also outlined on the development of MoS2 and other 2D TMD-based photodetectors.