Clean Water through Nanotechnology: Needs, Gaps, and Fulfillment

Nanoscience and nanotechnology for water remediation: an earnest hope toward sustainability

Water pollution and the global freshwater crisis are the most alarming concerns of the 21st century, as they threaten the sustainability and ecological balance of the environment. The growth of global population, climate change, and expansion of industrial processes are the main causes of these issues. Therefore, effective remediation of polluted water by means of detoxification and purification is of paramount importance. To this end, nanoscience and nanotechnology have emerged as viable options that hold tremendous potential toward the advancement of wastewater treatment methods to enhance treatment efficiency along with augmenting water supply via utilization of unconventional water sources. Materials at the nano level have shown great promise toward water treatment applications owing to their unique physicochemical properties. In this focus article, we highlight the role of new fundamental properties at the nano scale and material properties that are drastically increased due to the nano dimension (e.g. volume-surface ratio) and highlight their impact and potential toward water treatment. We identify and discuss how nano-properties could improve the three main domains of water remediation: the identification of pollutants, their adsorption and catalytic degradation. After discussing all the beneficial aspects we further discuss the key challenges associated with nanomaterials for water treatment. Looking at the current state-of-the-art, the potential as well as the challenges of nanomaterials, we believe that in the future we will see a significant impact of these materials on many water remediation strategies.

Mass Spectrometry Imaging Reveals the Morphology-Dependent Toxicological Effects of Nanosilvers on Multiple Organs of Adult Zebrafish (Danio rerio)

Nanosilvers with multifarious morphologies have been extensively used in many fields, but their morphology-dependent toxicity toward nontarget aquatic organisms remains largely unclear. Herein, we used matrix-assisted laser desorption/ionization mass spectrometry imaging (MALDI-MSI) to investigate the toxicological effects of silver nanomaterials with various morphologies on spatially resolved lipid profiles within multiple organs in adult zebrafish, especially for the gill, liver, and intestine. Integrated with histopathology, enzyme activity, accumulated Ag contents and amounts, as well as MSI results, we found that nanosilvers exhibit morphology-dependent nanotoxicity by disrupting lipid levels and producing oxidative stress. Silver nanospheres (AgNSs) had the highest toxicity toward adult zebrafish, whereas silver nanoflakes (AgNFs) exhibited greater toxicity than silver nanowires (AgNWs). Levels of differential phospholipids, such as PC, PE, PI, and PS, were associated with nanosilver morphology. Notably, we found that AgNSs induced greater toxicity in multiple organs, such as the brain, gill, and liver, while AgNWs and AgNFs caused greater toxicity in the intestine than AgNSs. Lipid functional disturbance and oxidative stress further caused inflammation and membrane damage after exposure to nanosilvers, especially with respect to sphere morphology. Taken together, these findings will contribute to clarifying the toxicological effects and mechanisms of different morphologies of nanosilvers in adult zebrafish.

A new MOF-based modified adsorbent for the efficient removal of Hg(ii) ions from aqueous media: isotherms and kinetics

Herein, a new MOF-based modified adsorbent for the efficient removal of Hg(ii) ions from water media was successfully prepared. Initially, a MOF nanocomposite was synthesized and applied as an efficient adsorbent for the removal of the target heavy metal ion. Following the synthesis, the MOF-based modified adsorbent was identified and characterized by SEM, XRD and FT-IR analytical instruments. The impact of several key variables such as pH of aqueous solution, adsorbent dosage, contact time, and initial concentration of the analyte of interest on the adsorption efficiency was also investigated in detail. Under the optimal conditions established (pH, 3; dose of adsorbent, 0.4 g L-1; contact time, 40 min and the analyte's concentration of 1 mg L-1) the removal efficiency of 96.3% for Hg(ii) was obtained. The results of the studies on the isotherm and kinetics of adsorption revealed that the adsorption process of Hg(ii) matched with the Langmuir isotherm (R2 > 0.990) and the pseudo 2nd-order kinetic models (R2 > 0.998). Additionally, reuse of the applied adsorbent for five consecutive tests exhibited a small percentage of drop (about 8%) in the removal efficiency of the target ion. Finally, the results indicated that the MOF-based modified compound could be potentially applied as a highly efficacious adsorbent for the discharge of Hg(ii) from aquatic media.

Novel fibrous Ag(NP) decorated clay-polymer composite: Implications in water purification contaminated with predominant micro-pollutants and bacteria

Due to the potential harm caused by emerging micro-pollutants to living organisms, contaminating water supplies by micro-pollutants like EDCs, pharmaceuticals, and microorganisms has become a concern in many countries. Considering both microbiological and micro-pollutant exposure risks associated with water use for agricultural/or household purposes, it is imperative to create a strategy for improving pollutant removal from treated wastewater that is both effective and affordable. Natural clay minerals efficiently remove contaminants from wastewater, though the pristine clay has less affinity to several organic pollutants. Hydrophilic polymers, viz., poly(ethylene glycol) (PEG), improve the dispersion of particles, flocculation processes, and surface properties. In this study, PEG grafted with attapulgite, thereby providing a high-specific surface-area, mesoporous materials for the adsorption of micro-pollutants like ciprofloxacin (CIP) and 17α-ethinylestradiol (EE2) at high rates. A gentle washing process regenerates the clay-polymer material several times with no performance loss, and the natural water implications show fair applicability of solid in decontaminating the CIP and EE2 in an aqueous medium. Further, greenly synthesized silver nanoparticles in situ disperse with the clay polymer efficiently remove the gram-positive and gram-negative bacterium viz., Bacillus subtilis, and Pseudomonas aeruginosa, which are commonly persistent in aquatic environments. The clay polymer outperformed a modified clay composite to eliminate microorganisms and organic micro-pollutants in significant quantities quickly. These results clearly show the importance of fibrous clay-polymer composite for water purification technologies.

Surface Bio-engineered Polymeric Nanoparticles

Surface bio-engineering of polymeric nanoparticles (PNPs) has emerged as a cornerstone in contemporary biomedical research, presenting a transformative avenue that can revolutionize diagnostics, therapies, and drug delivery systems. The approach involves integrating bioactive elements on the surfaces of PNPs, aiming to provide them with functionalities to enable precise, targeted, and favorable interactions with biological components within cellular environments. However, the full potential of surface bio-engineered PNPs in biomedicine is hampered by obstacles, including precise control over surface modifications, stability in biological environments, and lasting targeted interactions with cells or tissues. Concerns like scalability, reproducibility, and long-term safety also impede translation to clinical practice. In this review, these challenges in the context of recent breakthroughs in developing surface-biofunctionalized PNPs for various applications, from biosensing and bioimaging to targeted delivery of therapeutics are discussed. Particular attention is given to bonding mechanisms that underlie the attachment of bioactive moieties to PNP surfaces. The stability and efficacy of surface-bioengineered PNPs are critically reviewed in disease detection, diagnostics, and treatment, both in vitro and in vivo settings. Insights into existing challenges and limitations impeding progress are provided, and a forward-looking discussion on the field's future is presented. The paper concludes with recommendations to accelerate the clinical translation of surface bio-engineered PNPs.

2D/2D Heterojunction of BiOBr/BiOI Nanosheets for In Situ H2 O2 Production and Activation toward Efficient Photocatalytic Wastewater Treatment

The presence of toxic organic pollutants in aquatic environments poses significant threats to human health and global ecosystems. Photocatalysis that enables in situ production and activation of H2 O2 presents a promising approach for pollutant removal; however, the processes of H2 O2 production and activation potentially compete for active sites and charge carriers on the photocatalyst surface, leading to limited catalytic performance. Herein, a hierarchical 2D/2D heterojunction nanosphere composed of ultrathin BiOBr and BiOI nanosheets (BiOBr/BiOI) is developed by a one-pot microwave-assisted synthesis to achieve in situ H2 O2 production and activation for efficient photocatalytic wastewater treatment. Various experimental and characterization results reveal that the BiOBr/BiOI heterojunction facilitates efficient electron transfer from BiOBr to BiOI, enabling the one-step two-electron O2 reduction for H2 O2 production. Moreover, the ultrathin BiOI provides abundant active sites for H2 O2 adsorption, promoting in situ H2 O2 activation for •O2 - generation. As a result, the BiOBr/BiOI hybrid exhibits excellent activity for pollutant degradation with an apparent rate constant of 0.141 min-1 , which is 3.8 and 47.3 times that of pristine BiOBr and BiOI, respectively. This work expands the range of the materials suitable for in situ H2 O2 production and activation, paving the way toward sustainable environmental remediation using solar energy.

Unveiling nano-empowered catalytic mechanisms for PFAS sensing, removal and destruction in water

Per- and polyfluoroalkyl substances (PFAS) are organofluorine compounds used to manufacture various industrial and consumer goods. Due to their excellent physical and thermal stability ascribed to the strong CF bond, these are ubiquitously present globally and difficult to remediate. Extensive toxicological and epidemiological studies have confirmed these substances to cause adverse health effects. With the increasing literature on the environmental impact of PFAS, the regulations and research have also expanded. Researchers worldwide are working on the detection and remediation of PFAS. Many methods have been developed for their sensing, removal, and destruction. Amongst these methods, nanotechnology has emerged as a sustainable and affordable solution due to its tunable surface properties, high sorption capacities, and excellent reactivities. This review comprehensively discusses the recently developed nanoengineered materials used for detecting, sequestering, and destroying PFAS from aqueous matrices. Innovative designs of nanocomposites and their efficiency for the sensing, removal, and degradation of these persistent pollutants are reviewed, and key insights are analyzed. The mechanistic details and evidence available to support the cleavage of the CF bond during the treatment of PFAS in water are critically examined. Moreover, it highlights the challenges during PFAS quantification and analysis, including the analysis of intermediates in transitioning nanotechnologies from the laboratory to the field.

Application of Artificial Intelligence in the Management of Drinking Water: A Narrative Review

Waterborne illnesses are a significant concern worldwide. The management of water resources can be facilitated by artificial intelligence (AI) with the help of data analytics, regression models, and algorithms. Achieving the Sustainable Development Goals (SDGs) of the 2030 Agenda for Sustainable Development of the United Nations depends on understanding, communicating, and measuring the value of water and incorporating it into decision-making. Various barriers are used from the source to the consumer to prevent microbiological contamination of drinking water sources or reduce contamination to levels safe for human health. Infrastructure development and capacity-building policies should be integrated with guidelines on applying AI to problems relating to water to ensure good development outcomes. Communities can live healthily with such technology if they can provide clean, economical, and sustainable water to the ecosystem as a whole. Quick and accurate identification of waterborne pathogens in drinking and recreational water sources is essential for treating and controlling the spread of water-related diseases, especially in resource-constrained situations. To ensure successful development outcomes, policies on infrastructure development and capacity building should be combined with those on applying AI to water-related problems. The primary focus of this study is the use of AI in managing drinking water and preventing waterborne illness.

Preparation of graphene oxide-doped silica aerogel using supercritical method for efficient removal of emerging pollutants from wastewater

Emerging pollutants and a large volume of unused dyes from the textile industry have been contaminating water bodies. This work introduces a scalable approach to purifying water by the adsorption of Acid green 25 (AG), Crystal Violet (CV), and Sulfamethoxazole (SMA) from an aqueous solution by graphene oxide (GO) doped modified silica aerogel (GO-SA) with supercritical fluid deposition (SFD) method. Characterization of GO-SA using X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), high-resolution scanning electron microscopy (HR-SEM), thermogravimetric analysis (TGA), and Brunauer-Emmett-Teller (BET) adsorption isotherms revealed the improvement in the adsorbent surface area, and its textural properties. The high removal percentages observed in most of the experimental runs provide evidence of the excellent performance of the adsorbent towards the anionic and cationic dyes along with the antibiotic. The adsorption isotherm and kinetics showed that the Langmuir isotherm and pseudo-second-order kinetic models could explain adsorption. The adsorbent holds a higher adsorption capacity for SMA (67.07 mg g-1) than for CV (41.46 mg g-1) and AG (20.56 mg g-1) due to the higher hydrophobicity that interacts with the hydrophobic adsorbent. The GO-SA successfully removed AG, CV, and SMA with removal percentages of 98.23%, 98.71%, and 94.46%, respectively. The parameters were optimized using Central Composite Design (RSM-CCD). The prepared aerogel showed excellent reusability with a removal efficiency of > 85% even after 5 cycles. This study shows the potential of GO-SA adsorbent in textile and other wastewater purification.

Comparative Evaluation of Bioefficiency and Photocatalytic Activity of Green Synthesized Bismuth Oxide Nanoparticles Using Three Different Leaf Extracts

Nanotechnology has emerged as a promising method for wastewater recycling. In this line, the current study emphasizes the leaf-extract-mediated biosynthesis of bismuth oxide nanostructures (BiONPs) using three different plants, namely Coldenia procumbens Linn (Creeping Coldenia), Citrus limon (Lemon), and Murraya koenigii (Curry) through a greener approach and evaluates their biological properties as well as photocatalytic performance for the first time. As-synthesized BiONPs were physiochemically characterized using UV-visible spectroscopy, Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD), scanning electron microscopy (SEM), and high-resolution transmission electron microscopy (HRTEM) with energy dispersive X-ray analysis (EDAX). Using the well diffusion method, research on the antibacterial efficiency of BiONPs against human pathogenic Gram-positive bacteria, such as Staphylococcus aureus and Enterococcus faecalis, and Gram-negative bacteria, including Escherichia coli and Klebsiella pneumonia, revealed that Gram-negative bacteria exhibited relatively strong activity. The larvicidal activity assessed against Aedes aegypti and Aedes albopictus mosquito larvae reveals promising larvicidal activity with a minimal dosage of BiONPs with LC₅₀ values of 5.53 and 19.24 ppm, respectively, after 24 h of exposure. The excellent photocatalytic activity of as-synthesized BiONPs was demonstrated through the photodegradation of malachite green (MG) and methylene blue (MB) dyes with respective degradation performance parameters of 70 and 90%. The biogenic synthetic approach reported here enables the scalable commercial synthesis of bismuth nanostructures for their widespread use in catalysis for wastewater treatment and environmental cleanup.

Preferred Mode of Atmospheric Water Vapor Condensation on Nanoengineered Surfaces: Dropwise or Filmwise?

Condensing atmospheric water vapor on surfaces is a sustainable approach to addressing the potable water crisis. However, despite extensive research, a key question remains: what is the optimal combination of the mode and mechanism of condensation as well as the surface wettability for the best possible water harvesting efficacy? Here, we show how various modes of condensation fare differently in a humid air environment. During condensation from humid air, it is important to note that the thermal resistance across the condensate is nondominant, and the energy transfer is controlled by vapor diffusion across the boundary layer and condensate drainage from the condenser surface. This implies that, unlike condensation from pure steam, filmwise condensation from humid air would exhibit the highest water collection efficiency on superhydrophilic surfaces. To demonstrate this, we measured the condensation rates on different sets of superhydrophilic and superhydrophobic surfaces that were cooled below the dew points using a Peltier cooler. Experiments were performed over a wide range of degrees of subcooling (10-26 °C) and humidity-ratio differences (5-45 g/kg of dry air). Depending upon the thermodynamic parameters, the condensation rate is found to be 57-333% higher on the superhydrophilic surfaces compared to the superhydrophobic ones. The findings of the study dispel ambiguity about the preferred mode of vapor condensation from humid air on wettability-engineered surfaces and lead to the design of efficient atmospheric water harvesting systems.

Recent advances in Metal Organic Framework (MOF)-based hierarchical composites for water treatment by adsorptional photocatalysis: A review

Architecting a desirable and highly efficient nanocomposite for applications like adsorption, catalysis, etc. has always been a challenge. Metal Organic Framework (MOF)-based hierarchical composite has perceived popularity as an advanced adsorbent and catalyst. Hierarchically structured MOF material can be modulated to allow the surface interaction (external or internal) of MOF with the molecules of interest. They are well endowed with tunable functionality, high porosity, and increased surface area epitomizing mass transfer and mechanical stability of the fabricated nanostructure. Additionally, the anticipated optimization of nanocomposite can only be acquired by a thorough understanding of the synthesis techniques. This review starts with a brief introduction to MOF and the requirement for advanced nanocomposites after the setback faced by conventional MOF structures. Further, we discussed the background of MOF-based hierarchical composites followed by synthetic techniques including chemical and thermal treatment. It is important to rationally validate the successful nanocomposite fabrication by characterization techniques, an overview of challenges, and future perspectives associated with MOF-based hierarchically structured nanocomposite.

Degradation of methyl orange by dielectric films based on contact-electro-catalysis

Contact-electro-catalysis (CEC) has been recently proposed for the effective degradation of methyl orange, but the reactivity of catalysts in the CEC process needs further investigation. Here, we have used dielectric films, such as fluorinated ethylene propylene (FEP), modified by inductively coupled plasma (ICP) etching with argon, to replace the previously employed micro-powder due to their potential scalability, facile recycling process, and possible lower generation of secondary pollution. It has been found that ICP creates cone-like micro/nano structures on the surface, and thus changes the contact angle and specific surface area. The value of the contact angle varies non-linearly with etching time and attains a maximum after 60 seconds of etching. Concurrently, an increased electron transfer is observed, as well as an enhanced degradation efficiency, thus suggesting a special role of the surface structure. Finally, KPFM measurements show a lower electron affinity at the summit of the nanocones. This observation suggests that the structures are endowed with higher charge transfer ability. In addition, this film-based CEC has been observed in several polymer materials, such as PET, PTFE, and PVC. We view this work as a stepping stone to develop CEC into scalable applications, based on film technologies.

Biosensing Technologies: A Focus Review on Recent Advancements in Surface Plasmon Coupled Emission

In the past decade, novel nano-engineering protocols have been actively synergized with fluorescence spectroscopic techniques to yield higher intensity from radiating dipoles, through the process termed plasmon-enhanced fluorescence (PEF). Consequently, the limit of detection of analytes of interest has been dramatically improvised on account of higher sensitivity rendered by augmented fluorescence signals. Recently, metallic thin films sustaining surface plasmon polaritons (SPPs) have been creatively hybridized with such PEF platforms to realize a substantial upsurge in the global collection efficiency in a judicious technology termed surface plasmon-coupled emission (SPCE). While the process parameters and conditions to realize optimum coupling efficiency between the radiating dipoles and the plasmon polaritons in SPCE framework have been extensively discussed, the utility of disruptive nano-engineering over the SPCE platform and analogous interfaces such as 'ferroplasmon-on-mirror (FPoM)' as well as an alternative technology termed 'photonic crystal-coupled emission (PCCE)' have been seldom reviewed. In light of these observations, in this focus review, the myriad nano-engineering protocols developed over the SPCE, FPoM and PCCE platform are succinctly captured, presenting an emphasis on the recently developed cryosoret nano-assembly technology for photo-plasmonic hotspot generation (first to fourth). These technologies and associated sensing platforms are expected to ameliorate the current biosensing modalities with better understanding of the biophysicochemical processes and related outcomes at advanced micro-nano-interfaces. This review is hence envisaged to present a broad overview of the latest developments in SPCE substrate design and development for interdisciplinary applications that are of relevance in environmental as well as biological heath monitoring.

Understanding the adsorption of iron oxide nanomaterials in magnetite and bimetallic form for the removal of arsenic from water

Arsenic decontamination is a major worldwide concern as prolonged exposure to arsenic (>10 µg L-1) through drinking water causes serious health hazards in human beings. The selection of significant, cost-effective, and affordable processes for arsenic removal is the need of the hour. For the last decades, iron-oxide nanomaterials (either in the magnetite or bimetallic form) based adsorptive process gained attention owing to their high arsenic removal efficiency and high regenerative capacity as well as low yield of harmful by-products. In the current state-of-the-art, a comprehensive literature review was conducted focused on the applicability of iron-based nanomaterials for arsenic removal by considering three main factors: (a) compilation of arsenic removal efficiency, (b) identifying factors that are majorly affecting the process of arsenic adsorption and needs further investigation, and (c) regeneration capacity of adsorbents without affecting the removal process. The results revealed that magnetite and bimetallic nanomaterials are more effective for removing Arsenic (III) and Arsenic (V). Further, magnetite-based nanomaterials could be used up to five to six reuse cycles, whereas this value varied from three to six reuse cycles for bimetallic ones. However, most of the literature was based on laboratory findings using decided protocols and sophisticated instruments. It cannot be replicated under natural aquatic settings in the occurrence of organic contents, fluctuating pH and temperature, and interfering compounds. The primary rationale behind this study is to provide a comparative picture of arsenic removal through different iron-oxide nanomaterials (last twelve yearsof published literature) and insights into future research directions.

Graphene Nanocomposite Membranes: Fabrication and Water Treatment Applications

Graphene, a two-dimensional hexagonal honeycomb carbon structure, is widely used in membrane technologies thanks to its unique optical, electrical, mechanical, thermal, chemical and photoelectric properties. The light weight, mechanical strength, anti-bacterial effect, and pollution-adsorption properties of graphene membranes are valuable in water treatment studies. Incorporation of nanoparticles like carbon nanotubes (CNTs) and metal oxide into the graphene filtering nanocomposite membrane structure can provide an improved photocatalysis process in a water treatment system. With the rapid development of graphene nanocomposites and graphene nanocomposite membrane-based acoustically supported filtering systems, including CNTs and visible-light active metal oxide photocatalyst, it is necessary to develop the researches of sustainable and environmentally friendly applications that can lead to new and groundbreaking water treatment systems. In this review, characteristic properties of graphene and graphene nanocomposites are examined, various methods for the synthesis and dispersion processes of graphene, CNTs, metal oxide and polymer nanocomposites and membrane fabrication and characterization techniques are discussed in details with using literature reports and our laboratory experimental results. Recent membrane developments in water treatment applications and graphene-based membranes are reviewed, and the current challenges and future prospects of membrane technology are discussed.

Ultrasensitive Detection of C-Reactive Protein by a Novel Nanoplasmonic Immunoturbidimetry Assay

Nanotechnology has attracted much attention, and may become the key to a whole new world in the fields of food, agriculture, building materials, machinery, medicine, and electrical engineering, because of its unique physical and chemical properties, including high surface area and outstanding electrical and optical properties. The bottom-up approach in nanofabrication involves the growth of particles, and we were inspired to propose a novel nanoplasmonic method to detect the formation of nanoparticles in real time. This innovative idea may contribute to the promotion of nanotechnology development. An increase in nanometer particle size leads to optical extinction or density (OD)-value changes in our nanosensor chip at a specific wavelength measured in a generic microplate reader. Moreover, in applying this method, an ultrasensitive nanoplasmonic immunoturbidimetry assay (NanoPITA) was carried out for the high-throughput quantification of hypersensitive C-reactive protein (CRP), a well-known biomarker of cardiovascular, inflammatory, and tumor diseases. The one-step detection of the CRP concentration was completed in 10 min with high fidelity, using the endpoint analysis method. The new NanoPITA method not only produced a linear range from 1 ng/mL to 500 ng/mL CRP with the detection limit reduced to 0.54 ng/mL, which was an improvement of over 1000 times, with respect to regular immunoturbidity measurement, but was also effective in blood detection. This attractive method, combined with surface plasmon resonance and immunoturbidimetry, may become a new technology platform in the application of biological detection.

Recent advances and remaining barriers to the development of electrospun nanofiber and nanofiber composites for point-of-use and point-of-entry water treatment systems

In this review, we focus on electrospun nanofibers as a promising material alternative for the niche application of decentralized, point-of-use (POU) and point-of-entry (POE) water treatment systems. We focus our review on prior work with various formulations of electrospun materials, including nanofibers of carbon, pure metal oxides, functionalized polymers, and polymer-metal oxide composites, that exhibit analogous performance to media (e.g., activated carbon, ion exchange resins) commonly used in commercially available, certified POU/POE devices for contaminants including organic pollutants, metals (e.g., lead) and persistent oxyanions (e.g., nitrate). We then analyze the relevant strengths and remaining research and development opportunities of the relevant literature based on an evaluation framework that considers (i) performance comparison to commercial analogs; (ii) appropriate pollutant targets for POU/POE applications; (iii) testing in flow-through systems consistent with POU/POE applications; (iv) consideration of water quality effects; and (v) evaluation of material strength and longevity. We also identify several emerging issues in decentralized water treatment where nanofiber-based POU/POE devices could help meet existing needs including their use for treatment of uranium, disinfection, and in electrochemical treatment systems. To date, research has demonstrated promising material performance toward relevant targets for POU/POE applications, using appropriate aquatic matrices and considering material stability. To fully realize their promise as an emerging treatment technology, our analysis of the available literature reveals the need for more work that benchmarks nanofiber performance against established commercial analogs, as well as fabrication and performance validation at scales and under conditions simulating POU/POE water treatment.

Role of mixed surfactants system in preparation of silver nanoparticles

Different morphologies of silver nanoparticles (AgNPs) are prepared by reducing silver nitrate with hydrazine hydrate in an aqueous solution in the presence of the anionic surfactant sodium 6,6′-((oxybis(ethane-2,1-diyl))bis(oxy))bis(3-dodecanoylbenzenesulfonate) (SOBS), the cationic surfactant cetyltrimethylammonium bromide (CTAB) and mixtures of these two surfactants as template. By mixing these cationic and anionic surfactants, different aggregates (template) were formed. The properties of the nanoproducts are studied by X-ray diffraction, transmission electron microscopy, energy dispersive X-ray analysis and Fourier transform infrared spectroscopy. The results show that the morphology of the nanosilver can be controlled by changing the ratio of cationic to anionic surfactant in the mixture, resulting in silver nanoparticles with high crystallinity and low aggregation.

Recent advances on rapid detection and remediation of environmental pollutants utilizing nanomaterials-based (bio)sensors

Environmental safety has become a significant issue for the safety of living species, humans, and the ecosystem as a consequence of the harmful and detrimental consequences of various pollutants such as pesticides, heavy metals, dyes, etc., emitted into the surroundings. To resolve this issue, various efforts, legal acts, scientific and technological perspectives have been embraced, but still remain a global concern. Furthermore, due to non-portability, complex detection, and inappropriate on-site recognition of sophisticated laboratory tools, the real-time analysis of these environmental contaminants has been limited. As a result of innovative nano bioconjugation and nanofabrication techniques, nanotechnology enables enhanced nanomaterials (NMs) based (bio)sensors demonstrating ultra-sensitivity and a short detection time in real-time analysis, as well as superior sensitivity, reliability, and selectivity have been developed. Several researchers have demonstrated the potent detection of pollutants such as Hg²⁺ ion by the usage of AgNP-MD in electronic and optoelectronic methods with a detection limit of 5-45 μM which is quite significant. Taking into consideration of such tremendous research, herein, the authors have highlighted 21st-century strategies towards NMs based biosensor technology for pollutants detection, including nano biosensors, enzyme-based biosensors, electrochemical-based biosensors, carbon-based biosensors and optical biosensors for on-site identification and detection of target analytes. This article will provide a brief overview of the significance of utilizing NMs-based biosensors for the detection of a diverse array of hazardous pollutants, and a thorough understanding of the detection processes of NMs-based biosensors, as well as the limit of quantification (LOQ) and limit of detection (LOD) values, rendering researchers to focus on the world's need for a sustainable earth.

MoS2 Defect Healing for High-Performance Chemical Sensing of Polycyclic Aromatic Hydrocarbons

The increasing population and industrial development are responsible for environmental pollution. Among toxic chemicals, polycyclic aromatic hydrocarbons (PAHs) are highly carcinogenic contaminants resulting from the incomplete combustion of organic materials. Two-dimensional materials, such as transition metal dichalcogenides (TMDCs), are ideal sensory scaffolds, combining high surface-to-volume ratio with physical and chemical properties that are strongly susceptible to environmental changes. TMDCs can be integrated in field-effect transistors (FETs), which can operate as high-performance chemical detectors of (non)covalent interaction with small molecules. Here, we have developed MoS₂-based FETs as platforms for PAHs sensing, relying on the affinity of the planar polyaromatic molecules for the basal plane of MoS₂ and the structural defects in its lattice. X-ray photoelectron spectroscopy analysis, photoluminescence measurements, and transfer characteristics showed a notable reduction in the defectiveness of MoS₂ and a p-type doping upon exposure to PAHs solutions, with a magnitude determined by the correlation between the ionization energies (E_I) of the PAH and that of MoS₂. Naphthalene, endowed with the higher E_I among the studied PAHs, exhibited the highest output. We observed a log-log correlation between MoS₂ doping and naphthalene concentration in water in a wide range (10^-9-10^-6 M), as well as a reversible response to the analyte. Naphthalene concentrations as low as 0.128 ppb were detected, being below the limits imposed by health regulations for drinking water. Furthermore, our MoS₂ devices can reversibly detect vapors of naphthalene with both an electrical and optical readout, confirming that our architecture could operate as a dual sensing platform.

Recent and Emerging Trends in Remediation of Methylene Blue Dye from Wastewater by Using Zinc Oxide Nanoparticles

Due to the increased demand for clothes by the growing population, the dye-based sectors have seen fast growth in the recent decade. Among all the dyes, methylene blue dye is the most commonly used in textiles, resulting in dye effluent contamination. It is carcinogenic, which raises the stakes for the environment. The numerous sources of methylene blue dye and their effective treatment procedures are addressed in the current review. Even among nanoparticles, photocatalytic materials, such as TiO2, ZnO, and Fe3O4, have shown greater potential for photocatalytic methylene blue degradation. Such nano-sized metal oxides are the most ideal materials for the removal of water pollutants, as these materials are related to the qualities of flexibility, simplicity, efficiency, versatility, and high surface reactivity. The use of nanoparticles generated from waste materials to remediate methylene blue is highlighted in the present review.

The role of sodium dodecyl sulfate mediated hydrothermal synthesis of MoS2 nanosheets for photocatalytic dye degradation and dye-sensitized solar cell application

The novel properties and exciting behavior of two-dimensional nanosheet-based materials have piqued the interest of research all over the world. In this study, bulk molybdenum disulfide (bulk MoS₂) and sodium dodecyl sulfate-mediated molybdenum disulfide nanosheets (MoS₂-SDS NS) were synthesized via a facile sonication and hydrothermal process. The findings from the characterization revealed that the addition of sodium dodecyl sulfate (SDS) surfactant reduces the crystal phase and changes the structural morphology of bulk MoS₂. Furthermore, the photocatalytic and photovoltaic performance of bulk MoS₂ and MoS₂-SDS NS were also investigated. The results show that by using methylene blue dye, the photocatalytic efficiency increased from 56.30% to 91.84% at 150 min under UV-Visible light irradiation, and the photo-conversion efficiency (PEC (%)) of the dye-sensitized solar cell increased from 1.47% to 3.81% for bulk MoS₂ and MoS₂-SDS NS, respectively. Finally, we discussed in-depth the effect of SDS surfactants on MoS₂, which can improve their photovoltaic and photocatalytic performance.

Immobilized arginine/tryptophan-rich cyclic dodecapeptide on reduced graphene oxide anchored with manganese dioxide for microbial biofilm eradication

To avoid the accumulation of bacterial biofilms in water pipelines, it is critical to develop potent antimicrobial agents with good ability to reduce extracellular polymeric substances (EPS). In this study, cyclic dodecapeptides were synthesized, and different mutations for increasing the ratio of arginine (Arg) and tryptophan (Trp) were introduced. Separately, the synthesized dodecapeptides were immobilized on a reduced graphene oxide nanocomposite anchored with a hierarchical β-MnO₂ (RGO/β-MnO₂) hybrid. With a minimum inhibitory concentration of 0.97 g/mL, the immobilized Arg-Trp rich antimicrobial peptides (AMP) on RGO/MnO₂ nanocomposite, Cdp-4/RGO/MnO₂, showed superior efficacy against multidrug-resistant Pseudomonas aeruginosa ATCC 15692 (P. aeruginosa) planktonic cells. The immobilized Cdp-4/RGO/β-MnO₂ also eradicated the mature biofilm by 99% with a minimum inhibitory concentration value of 62.5 µg/mL with significant reduction of EPS. These characteristics allow the use of the immobilized Arg-Trp rich AMP as a promising antimicrobial agent against microbial biofilms, present in water distribution systems.

Orange peel extract influenced partial transformation of SnO2 to SnO in green 3D-ZnO/SnO2 system for chlorophenol degradation

In recent times, visible light enhancement has become much more considered due to the enlightening properties of nanocomposite systems. This has potential applications for wastewater treatment due to the blemish of toxic organic chemicals from industrial sectors. Therefore, this work is focused on novel 3D ZnO/SnO₂ nanocomposites synthesized by the green method (orange peel extracts supported combined chemical processes) utilized for the removal of chlorophenol effluent. The orange peel extract has been incorporated as one of the major components to synthesize an effective nanocomposite. Also, the pure materials were synthesized along with these nanocomposites and tested under various instrumental techniques. The characterized results showed that the composites prepared with orange peel extract exhibited hexagonal 3D ZnO nanospheres with 3D tetragonal structured SnO₂ nanocubes. Elemental analysis showed that the partial amount of SnO₂ has transformed to SnO due to the reducing ability of orange peel extract. Also, the existing different (Zn²⁺, Sn⁴⁺, and Sn²⁺) states helped in delaying the transfer of electron-hole recombination to obtain photocatalytic chlorophenol degradation. Further, the prevailing line dislocation can compromise more vacancy and interact with more electrons. The high surface area, least crystallite size, and lower bandgap inspired to enhance the visible light activity. Simultaneously, the pure form of nanomaterial has poor light absorption under visible light. This study achieves the photocatalytic degradation of 77.5% against chlorophenol using a green 3D composite system.

Nanohydrogels: Advanced Polymeric Nanomaterials in the Era of Nanotechnology for Robust Functionalization and Cumulative Applications

In the era of nanotechnology, the synthesis of nanomaterials for advanced applications has grown enormously. Effective therapeutics and functionalization of effective drugs using nano-vehicles are considered highly productive and selectively necessary. Polymeric nanomaterials have shown their impact and influential role in this process. Polymeric nanomaterials in molecular science are well facilitated due to their low cytotoxic behavior, robust functionalization, and practical approach towards in vitro and in vivo therapeutics. This review highlights a brief discussion on recent techniques used in nanohydrogel designs, biomedical applications, and the applied role of nanohydrogels in the construction of advanced therapeutics. We reviewed recent studies on nanohydrogels for their wide applications in building strategies for advantageously controlled biological applications. The classification of polymers is based on their sources of origin. Nanohydrogel studies are based on their polymeric types and their endorsed utilization for reported applications. Nanotechnology has developed significantly in the past decades. The novel and active role of nano biomaterials with amplified aspects are consistently being studied to minimize the deleterious practices and side effects. Here, we put forth challenges and discuss the outlook regarding the role of nanohydrogels, with future perspectives on delivering constructive strategies and overcoming the critical objectives in nanotherapeutic systems.

Nanotechnology for a Sustainable Future: Addressing Global Challenges with the International Network4Sustainable Nanotechnology

Nanotechnology has important roles to play in international efforts in sustainability. We discuss how current and future capabilities in nanotechnology align with and support the United Nations' Sustainable Development Goals. We argue that, as a field, we can accelerate the progress toward these goals both directly through technological solutions and through our special interdisciplinary skills in communication and tackling difficult challenges. We discuss the roles of targeting solutions, technology translation, the circular economy, and a number of examples from national efforts around the world in reaching these goals. We have formed a network of leading nanocenters to address these challenges globally and seek to recruit others to join us.

Recent Progress and Prospects in Catalytic Water Treatment

Presently, conventional technologies in water treatment are not efficient enough to completely mineralize refractory water contaminants. In this context, the implementation of catalytic processes could be an alternative. Despite the advantages provided in terms of kinetics of transformation, selectivity, and energy saving, numerous attempts have not yet led to implementation at an industrial scale. This review examines investigations at different scales for which controversies and limitations must be solved to bridge the gap between fundamentals and practical developments. Particular attention has been paid to the development of solar-driven catalytic technologies and some other emerging processes, such as microwave assisted catalysis, plasma-catalytic processes, or biocatalytic remediation, taking into account their specific advantages and the drawbacks. Challenges for which a better understanding related to the complexity of the systems and the coexistence of various solid-liquid-gas interfaces have been identified.

Nanotechnology Fundamentals Applied to Clinical Infectious Diseases and Public Health

Nanotechnology involves the discovery and fabrication of nanoscale materials possessing unique physicochemical properties that are being employed in industry and medicine. Infectious Diseases clinicians and public health scientists utilize nanotechnology applications to diagnose, treat, and prevent infectious diseases. However, fundamental principles of nanotechnology are often presented in technical formats that presuppose an advanced knowledge of chemistry, physics, and engineering, thereby limiting the clinician’s grasp of the underlying science. While nanoscience is technically complex, it need not be out of reach of the clinical practitioner. The aim of this review is to introduce fundamental principles of nanotechnology in an accessible format, describe examples of current clinical infectious diseases and public health applications, and provide a foundation that will aid understanding of and appreciation for this burgeoning and important field of science.

Solar-Powered Sustainable Water Production: State-of-the-Art Technologies for Sunlight-Energy-Water Nexus

Alternative water resources (seawater, brackish water, atmospheric water, sewage, etc.) can be converted into clean freshwater via high-efficiency, energy-saving, and cost-effective methods to cope with the global water crisis. Herein, we provide a comprehensive and systematic overview of various solar-powered technologies for alternative water utilization (i.e., "sunlight-energy-water nexus"), including solar-thermal interface desalination (STID), solar-thermal membrane desalination (STMD), solar-driven electrochemical desalination (SED), and solar-thermal atmospheric water harvesting (ST-AWH). Three strategies have been proposed for improving the evaporation rate of STID systems above the theoretical limit and designing all-weather or all-day operating STID systems by analyzing the energy transfer of the evaporation and condensation processes caused by solar-thermal conversion. This review also introduces the fundamental principles and current research hotspots of two other solar-driven seawater or brackish water desalination technologies (STMD and SED) in detail. In addition, we also cover ST-AWH and other solar-powered technologies in terms of technology design, materials evolution, device assembly, etc. Finally, we summarize the content of this comprehensive review and discuss the challenges and future outlook of different types of solar-powered alternative water utilization technologies.

Superhydrophobic Waste Cardboard Aerogels as Effective and Reusable Oil Absorbents

As the main component of the municipal waste, waste cardboard has caused a host of environmental problems. Therefore, the reasonable disposal of waste cardboard is of great significance to global sustainable development and green economics. Herein, using waste cardboard as the raw material, a superhydrophobic aerogel has been developed with a unique three-dimensional porous network structure, which exhibits excellent selective oil absorption capacities. The aerogel was made by combining Ca2+ cross-links and postmodification with stearic acid. Superhydrophobic aerogels can absorb various organic solutions and its maximum absorption capacity can reach 47 times its own weight. Meanwhile, the size of aerogels has been further expanded, with a diameter of 21.2 cm and a height of 3.2 cm, which can absorb 34 times its own weight of kerosene. More importantly, the aerogel can also absorb oil droplets in oil/water emulsions with an adsorption efficiency of over 98.5%. Moreover, the aerogel can be employed multiple times without significantly reducing the adsorption capacity via distillation or squeezing, depending upon the type of pollutions. Consequently, we believe that these facile and inexpensive superhydrophobic aerogels can effectively adsorb oily wastewater, which matches well with the requirement for environmentally friendliness from the perspective of practical application.

Fe-Mn Oxides Based Multifunctional Adsorptive/Electrosensing Nanoplatforms: Dynamic Site Rearrangement for Metal Ion Selectivity

Achieving structural requirements for the exclusive selectivity of adsorbent to a specific metal remains challenging, as certain metal ions show similar adsorptive behaviors and preference toward a given site. We reported the morphology and oxidation state-dependent selectivity manipulating of layered oxides by controlling the dynamic evolution of different adsorptive sites. The computational investigation predicted the site-specific partitioning trends of metal ions at two sites of manganese oxide (MnO₂) layers: the lateral edge sites (LESs) and octahedral vacancy sites (OVSs). In contrast to the predominant occupation of the OVSs for other metal ions, the binding of lead (Pb) ions was energetically favored at both the sites. We assembled ultrathin MnO₂ nanosheets on the magnetic iron oxides to first enhance the accessibility of the LESs. A sequential ligand-promoted partial reduction of the atomic MnO₂ layers induced the edge-to-interlayer migration of Mn atoms to block the nonspecific OVSs and activate the LESs, enabling a superior selectivity to Pb. In addition, the iron oxides helped construct a multifunctional adsorptive/electrosensing platform for Pb regarding their facile magnetic separation and electrochemical activity. Simultaneous selective adsorption and on-site monitoring of Pb(II) were achieved on this nanoplatform, owing to its satisfactory stability and sensitivity without an obvious matrix effect.

Evaluation of Polyurea-Crosslinked Alginate Aerogels for Seawater Decontamination

Polyurea-crosslinked Ca-alginate (X-Ca-alginate) aerogel beads (diameter: 3.3 mm) were evaluated as adsorbents of metal ions, organic solvents, and oils. They were prepared via reaction of an aromatic triisocyanate (Desmodur RE) with pre-formed Ca-alginate wet gels and consisted of 54% polyurea and 2% calcium. X-Ca-alginate aerogels are hydrophobic nanoporous materials (90% v/v porosity), with a high BET surface area (459 m²/g⁻¹), and adsorb Pb^II not only from ultrapure water (29 mg/g⁻¹) but also from seawater (13 mg/g⁻¹) with high selectivity. The adsorption mechanism involves replacement of Ca^II by Pb^II ions coordinated to the carboxylate groups of the alginate backbone. After treatment with a Na₂EDTA solution, the beads can be reused, without significant loss of activity for at least two times. X-Ca-alginate aerogels can also uptake organic solvents and oil from seawater; the volume of the adsorbate can be as high as the total pore volume of the aerogel (6.0 mL/g⁻¹), and the absorption is complete within seconds. X-Ca alginate aerogels are suitable for the decontamination of aquatic environments from a broader range of inorganic and organic pollutants.

Nanocellulosics: Benign, Sustainable, and Ubiquitous Biomaterials for Water Remediation

Water is critical for all lives to thrive. Access to potable and safe water has been argued to rank top among the prerequisites for defining the standard of living of a nation. However, there is a global decline in water quality due to human activities and other factors that severely impact freshwater resources such as saltwater intrusion and natural disasters. It has been pointed out that the millions of liters of industrial and domestic wastewater generated globally have the potential to help mitigate water scarcity if it is appropriately captured and remediated. Among the many initiatives to increase access to clean water, the scientific community has focused on wastewater remediation through the utilization of bioderived materials, such as nanocellulosics. Nanocellulosics, derived from cellulose, have the advantages of being ubiquitous, nontoxic, and excellent adsorbents. Furthermore, the surface properties of nanocellulosic materials can easily be modified. These advantages make them promising materials for water remediation applications. This perspective highlights the most important new developments in the application of nanocellulosics in water treatment technologies, such as membrane, adsorption, sensors, and flocculants/coagulants. We also identify where further work is urgently required for the widespread industrial application of nanocellulosics in wastewater treatment.

Kinetic Studies of Cs+ and Sr2+ Ion Exchange Using Clinoptilolite in Static Columns and an Agitated Tubular Reactor (ATR)

Natural clinoptilolite was studied to assess its performance in removing caesium and strontium ions, using both static columns and an agitated tube reactor (ATR) for process intensification. Kinetic breakthrough curves were fitted using the Thomas and Modified Dose Response (MDR) models. In the static columns, the clinoptilolite adsorption capacity (qe) for 200 ppm ion concentrations was found to be ~171 and 16 mg/g for caesium and strontium, respectively, highlighting the poor material ability to exchange strontium. Reducing the concentration of strontium to 100 ppm, however, led to a higher strontium qe of ~48 mg/g (close to the maximum adsorption capacity). Conversely, halving the column residence time to 15 min decreased the qe for 100 ppm strontium solutions to 13–14 mg/g. All the kinetic breakthrough data correlated well with the maximum adsorption capacities found in previous batch studies, where, in particular, the influence of concentration on the slow uptake kinetics of strontium was evidenced. For the ATR studies, two column lengths were investigated (of 25 and 34 cm) with the clinoptilolite embedded directly into the agitator bar. The 34 cm-length system significantly outperformed the static vertical columns, where the adsorption capacity and breakthrough time were enhanced by ~30%, which was assumed to be due to the heightened kinetics from shear mixing. Critically, the increase in performance was achieved with a relative process flow rate over twice that of the static columns.

Reuse of Predesigned Dual-Functional Metal Organic Frameworks (DF-MOFs) after Heavy Metal Removal

Designing porous and functionalized adsorbents and achieving high efficiency in heavy metals removal from wastewater is in the spotlight of environmental science. On the other hand, upon removal, adsorbents are still highly hazardous requiring that great care be taken in its packaging, transporting and storing. A fundamental route in the synthesis of functional extended structures is the ability to combine different chemical entities in a controlled way in order to achieve high performance. Herein, we report the systematic design of dual-functionalized metal organic framework (TMU-81) by incorporating sulfonyl and amide groups for the removal of Cd(II), Cu(II) and Cr(II) ions from simulated aqueous solutions. TMU-81 showed significant enhancement in heavy metals uptake suggesting that the strong host - guest interactions between cations and the donor sites play a major role in adsorption process. The maximum adsorption capacity for Cd²⁺ was 526 mg/g which is among the highest values reported for similar MOFs and other porous materials. The good performance in uptake and selectivity of TMU-81 can be attributed to the network structure that shaping the void, create mono-dimensional channels, decorated by exposed oxygen atom sites selective for Cadmium ion. Environmental "compatibility" of a treated MOFs was studied in order to evaluate its possible recycling as a new template for different applications by using pyrolysis method. Engineering of the pore surface provides a potential for MOF with a hybrid interface to act as a versatile tool for the design of multifunctional nanoparticles to meet specific application requirements.

Highly effective catalytic reduction of nitrobenzene compounds with gold nanoparticle-immobilized hydroxyapatite nanowire-sintered porous ceramic beads

A catalytic ceramic bead with micron-sized and interconnected porous channels, adjustable porosity, high catalytic activity, and long-term stability is prepared.