Liquid-Infused Surfaces: A Review of Theory, Design, and Applications

Recent Developments in Slippery Liquid-Infused Porous Surface Coatings for Biomedical Applications

Slippery liquid-infused porous surface (SLIPS), inspired by the Nepenthes pitcher plant, exhibits excellent performances as it has a smooth surface and extremely low contact angle hysteresis. Biomimetic SLIPS attracts considerable attention from the researchers for different applications in self-cleaning, anti-icing, anticorrosion, antibacteria, antithrombotic, and other fields. Hence, SLIPS has shown promise for applications across both the biomedical and industrial fields. However, the manufacturing of SLIPS with strong bonding ability to different substrates and powerful liquid locking performance remains highly challenging. In this review, a comprehensive overview of research on SLIPS for medical applications is conducted, and the design parameters and common fabrication methods of such surfaces are summarized. The discussion extends to the mechanisms of interaction between microbes, cells, proteins, and the liquid layer, highlighting the typical antifouling applications of SLIPS. Furthermore, it identifies the potential of utilizing the controllable factors provided by SLIPS to develop innovative materials and devices aimed at enhancing human health.

Bioinspired Slippery Surfaces for Liquid Manipulation from Tiny Droplet to Bulk Fluid

Slippery surfaces, which originate in nature with special wettability, have attracted considerable attention in both fundamental research and practical applications in a variety of fields due to their unique characteristics of superlow liquid friction and adhesion. Although research on bioinspired slippery surfaces is still in its infancy, it is a rapidly growing and enormously promising field. Herein, a systematic review of recent progress in bioinspired slippery surfaces, beginning with a brief introduction of several typical creatures with slippery property in nature, is presented. Subsequently,this review gives a detailed discussion on the basic concepts of the wetting, friction, and drag from micro- and macro-aspects and focuses on the underlying slippery mechanism. Next, the state-of-the-art developments in three categories of slippery surfaces of air-trapped, liquid-infused, and liquid-like slippery surfaces, including materials, design principles, and preparation methods, are summarized and the emerging applications are highlighted. Finally, the current challenges and future prospects of various slippery surfaces are addressed.

Antifouling binary liquid-infused membranes for biological sample pretreatment

Hydrophobic membranes infused with mixed solvents including a low polar solvent and a specific solvent can efficiently separate analytes from blood upon applying a voltage. In contrast, membranes infused with a specific solvent alone show significantly reduced separation efficiencies for blood samples. Infusion of a low polar solvent is of importance for achieving antifouling ability of membranes for biological sample pretreatment.

Fundamentals and Applications of Surface Wetting

In an era defined by an insatiable thirst for sustainable energy solutions, responsible water management, and cutting-edge lab-on-a-chip diagnostics, surface wettability plays a pivotal role in these fields. The seamless integration of fundamental research and the following demonstration of applications on these groundbreaking technologies hinges on manipulating fluid through surface wettability, significantly optimizing performance, enhancing efficiency, and advancing overall sustainability. This Review explores the behavior of liquids when they engage with engineered surfaces, delving into the far-reaching implications of these interactions in various applications. Specifically, we explore surface wetting, dissecting it into three distinctive facets. First, we delve into the fundamental principles that underpin surface wetting. Next, we navigate the intricate liquid-surface interactions, unraveling the complex interplay of various fluid dynamics, as well as heat- and mass-transport mechanisms. Finally, we report on the practical realm, where we scrutinize the myriad applications of these principles in everyday processes and real-world scenarios.

Modeling of Shear Flows over Superhydrophobic Surfaces: From Newtonian to Non-Newtonian Fluids

The design and use of superhydrophobic surfaces have gained special attentions due to their superior performances and advantages in many flow systems, e.g., in achieving specific goals including drag reduction and flow/droplet handling and manipulation. In this work, we conduct a brief review of shear flows over superhydrophobic surfaces, covering the classic and recent studies/trends for both Newtonian and non-Newtonian fluids. The aim is to mainly review the relevant mathematical and numerical modeling approaches developed during the past 20 years. Considering the wide ranges of applications of superhydrophobic surfaces in Newtonian fluid flows, we attempt to show how the developed studies for the Newtonian shear flows over superhydrophobic surfaces have been evolved, through highlighting the major breakthroughs. Despite the fact that, in many practical applications, flows over superhydrophobic surfaces may show complex non-Newtonian rheology, interactions between the non-Newtonian rheology and superhydrophobicity have not yet been well understood. Therefore, in this Review, we also highlight emerging recent studies addressing the shear flows of shear-thinning and yield stress fluids in superhydrophobic channels. We focus on reviewing the models developed to handle the intricate interaction between the formed liquid/air interface on superhydrophobic surfaces and the overlying flow. Such an intricate interaction will be more complex when the overlying flow shows nonlinear non-Newtonian rheology. We conclude that, although our understanding on the Newtonian shear flows over superhydrophobic surfaces has been well expanded via analyzing various aspects of such flows, the non-Newtonian counterpart is in its early stages. This could be associated with either the early applications mainly concerning Newtonian fluids or new complexities added to an already complex problem by the nonlinear non-Newtonian rheology. Finally, we discuss the possible directions for development of models that can address complex non-Newtonian shear flows over superhydrophobic surfaces.

Study of Hydration Repulsion of Zwitterionic Polymer Brushes Resistant to Protein Adhesion through Molecular Simulations

The fabrication of antifouling zwitterionic polymer brushes represents a leading approach to mitigate nonspecific adhesion on the surfaces of medical devices. This investigation seeks to elucidate the correlation between the material composition and structural attributes of these polymer brushes in preventing protein adhesion. To achieve this goal, we modeled three different zwitterionic brushes, namely, carboxybetaine methacrylate (CBMA), sulfobetaine methacrylate (SBMA), and (2-(methacryloyloxy)ethyl)-phosphorylcholine (MPC). The simulations revealed that elevating the grafting density enhances the structural stability, hydration strength, and resistance to protein adhesion exhibited by the polymer brushes. PCBMA manifests a more robust hydration layer, while PMPC demonstrates the slightest interaction with proteins. In a comprehensive evaluation, PSBMA polymer brushes emerged as the best choice with superior stability, enhanced protein repulsion, and minimally induced protein deformation, resulting in effective resistance to nonspecific adhesion. The high-density SBMA polymer brushes significantly reduce the level of protein adhesion in AFM testing. In addition, we have pioneered the quantitative characterization of hydration repulsion in polymer brushes by analyzing the hydration repulsion characteristics at different materials and graft densities. In summary, our study provides a nuanced understanding of the material and structural determinants influencing the capacity of zwitterionic polymer brushes to thwart protein adhesion. Additionally, it presents a quantitative elucidation of hydration repulsion, contributing to the advancement and application of antifouling polymer brushes.

Engineered Sustainable Omniphobic Coatings to Control Liquid Spreading on Food-Contact Materials

The adhesion of sticky liquid foods to a contacting surface can cause many technical challenges. The food manufacturing sector is confronted with many critical issues that can be overcome with long-lasting and highly nonwettable coatings. Nanoengineered biomimetic surfaces with distinct wettability and tunable interfaces have elicited increasing interest for their potential use in addressing a broad variety of scientific and technological applications, such as antifogging, anti-icing, antifouling, antiadhesion, and anticorrosion. Although a large number of nature-inspired surfaces have emerged, food-safe nonwetted surfaces are still in their infancy, and numerous structural design aspects remain unexplored. This Review summarizes the latest scientific research regarding the key principles, fabrication methods, and applications of three important categories of nonwettable surfaces: superhydrophobic, liquid-infused slippery, and re-entrant structured surfaces. The Review is particularly focused on new insights into the antiwetting mechanisms of these nanopatterned structures and discovering efficient platform methodologies to guide their rational design when in contact with food materials. A detailed description of the current opportunities, challenges, and future scale-up possibilities of these nanoengineered surfaces in the food industry is also provided.

Achieving Extreme Pressure Resistance to Liquids on a Super-Omniphobic Surface with Armored Reentrants

Static repellency and pressure resistance to liquids are essential for high-performance super-omniphobic surfaces. However, these two merits appear mutually exclusive in conventional designs because of their conflicting structural demands: Static liquid repellency necessitates minimal solid-liquid contact, which in turn inevitably undercuts the surface's ability to resist liquid invasion exerted by the elevated pressure. Here, inspired by the Springtail, these two merits can be simultaneously realized by structuring surfaces at two size scales, with a micrometric reentrant structure providing static liquid repellency and a nanometric reentrant structure providing pressure resistance, which dexterously avoids the dilemma of their structural conflicts. The nanometric reentrants are densely packed on the micrometric ones, serving as "armor" that prevents liquids invasion by generating multilevel energy barriers, thus naming the surface as the armored reentrants (AR) surface. The AR surface could repel liquids with very low surface tensions, such as silicone oil (21 mN m-1), and simultaneously resist great pressure from the liquids, exemplified by enduring the impact of low-surface-tension liquids under a high weber number (>400), the highest-pressure resistance ever reported. With its scalable fabrication and enhanced performance, our design could extend the application scope of liquid-repellent surfaces toward ultimate industrial settings.

Droplet Manipulation on Bioinspired Slippery Surfaces: From Design Principle to Biomedical Applications

Droplet manipulation with high efficiency, high flexibility, and programmability, is essential for various applications in biomedical sciences and engineering. Bioinspired liquid-infused slippery surfaces (LIS), with exceptional interfacial properties, have led to expanding research for droplet manipulation. In this review, an overview of actuation principles is presented to illustrate how materials or systems can be designed for droplet manipulation on LIS. Recent progress on new manipulation methods on LIS is also summarized and their prospective applications in anti-biofouling and pathogen control, biosensing, and the development of digital microfluidics are presented. Finally, an outlook is made on the key challenges and opportunities for droplet manipulation on LIS.

Understanding the role of infusing lubricant composition in the interfacial interactions and properties of slippery surface

Liquid-infused surfaces (LISs) have attracted tremendous attention in recent years owing to their excellent surface properties, such as self-cleaning and anti-fouling. Understanding the effect of lubricant composition on LIS performance is of vital importance, which will help establish the criteria to choose suitable infusing lubricants for specific applications. In this work, the role of chemical composition of lubricant in the properties of LISs was investigated. The apparent water contact angle θapp was dependent on the temperature and beeswax/silicone oil ratio. Nevertheless, the trend of moving velocity of water drop on the tilted LISs did not follow that of θapp at 20 °C and 37 °C, which was attributed to the increased lubricant viscosity with beeswax/silicone oil ratio. At 60 °C, the drop velocity and θapp shared the similar variation trend with beeswax/silicone oil ratio, highlighting the significant role of chemistry of the components in beeswax. The alkanes and fatty acids promoted the drop movement, while the fatty acid esters impeded the movement. The interaction forces between water drop and lubricant surfaces were measured using atomic force microscopy. It was demonstrated that the interaction between water drop and lubricant was not the only factor to control the drop movement, while the interaction between lubricant and substrate as well as of lubricant itself also determined the movement. When the adhesions of water-lubricant and lubricant-substrate were similar for different lubricants, the influence of cohesion of lubricant became significant. This work provides useful insights into the fundamental understanding of the interfacial interactions of test drop, infusing lubricant and solid substrate of LISs, and the effect of infusing lubricant composition on the LIS performance.

Electric-Field-Induced Selective Directed Transport of Diverse Droplets

Droplet directional transport is one of the central topics in microfluidics and lab-on-a-chip applications. Selective transport of diverse droplets, particularly in another liquid phase environment with controlled directions, is still challenging. In this work, we propose an electric-field gradient-driven droplet directional transport platform facilitated by a robust lubricant surface. On the platform, we clearly demonstrated a liquid-inherent critical frequency-dominated selective transport of diverse droplets and a driving mechanism transition from electrowetting to liquid dielectrophoresis. Enlightened by the Kelvin-Helmholtz theory, we first realize the directional droplet transport in another liquid phase whenever a permittivity difference exists. Co-transport of multiple droplets and various combinations of droplet types, as well as multifunctional droplet transport modes, are realized based on the presented powerful electric-field gradient-driven platform, overcoming the limitations of the surrounding environment, liquid conductivity, and intrinsic solid-liquid wetting property existing in traditional droplet transport strategies. This work may inspire new applications in liquid separation, multiphase microfluidic manipulation, chemical reagent selection, and so on.

In vitro hemocompatibility screening of a slippery liquid impregnated surface coating for extracorporeal organ support applications

INTRODUCTION

Clot formation, infection, and biofouling are unfortunate but frequent complications associated with the use of blood-contacting medical devices. The challenge of blood-foreign surface interactions is exacerbated during medical device applications involving substantial blood contact area and extended duration of use, such as extracorporeal life support (ECLS). We investigated a novel surface modification, a liquid-impregnated surface (LIS), designed to minimize protein adsorption and thrombus development on medical plastics.

METHODS

The hemocompatibility and efficacy of LIS was investigated first in a low-shear model with LIS applied to the lumen of blood incubation vials and exposed to human whole blood. Additionally, LIS was evaluated in a 6 h ex vivo circulation model with swine blood using full-scale ECLS circuit tubing and centrifugal pumps with clinically relevant flow rate (1.5 L/min) and shear conditions for extracorporeal carbon dioxide removal.

RESULTS

Under low-shear, LIS preserved fibrinogen concentration in blood relative to control polymers (+40 ± 6 mg/dL vs polyvinyl chloride, p < .0001), suggesting protein adsorption was minimized. A fibrinogen adhesion assay demonstrated a dramatic reduction in protein adsorption under low shear (87% decrease vs polyvinyl chloride, p = .01). Thrombus deposition and platelet adhesion visualized by scanning electron microscopy were drastically reduced. During the 6 h ex vivo circulation, platelets in blood exposed to LIS tubing did not become significantly activated or procoagulant, as occurred with control tubing; and again, thrombus deposition was visually reduced.

CONCLUSIONS

A LIS coating demonstrated potential to reduce thrombus formation on medical devices. Further testing is needed specialized to clinical setting and duration of use for specific medical target applications.

Superomniphobic and Photoactive Surface Presents Antimicrobial Properties by Repelling and Killing Pathogens

Healthcare-acquired infections place a significant burden on the cost and quality of patient care in hospitals. Reducing contamination on surfaces within healthcare environments is critical for halting the spread of these infections. Herein, we report a bifunctional─repel and kill─surface developed using photoactive TiO2 nanoparticles integrated into a hierarchical scaffold (OmniKill). To quantify the repellency of OmniKill, we developed a touch-based assay, capable of simulating the transfer of individual pathogens, multiple pathogens, or pathogen-latent fecal matter from hands to surfaces. OmniKill repels bacterial pathogens by at least 2.77-log (99.8%). The photoactive material within OmniKill further reduces the viability of transferred pathogens on the surface by an additional 2.43-log (99.6%) after 1 h of light exposure. The antipathogenic effects─repel and kill─remain robust under complex biological contaminates such as feces. These findings show the potential use of OmniKill in reducing the physical transmission of bacterial pathogens in healthcare settings.

Heterogenous Slippery Surfaces: Enabling Spontaneous and Rapid Transport of Viscous Liquids with Viscosities Exceeding 10 000 mPa s

Superhydrophobic and slippery lubricant-infused surfaces have garnered significant attention for their potential to passively transport low-viscosity liquids like water (1 mPa s). Despite exciting progress, these designs have proven ineffective for transporting high-viscosity liquids such as polydimethylsiloxane (5500 mPa s) due to their inherent limitations imposed by the homogenous surface design, resulting in high viscous drags and compromised capillary forces. Here, a heterogenous water-infused divergent surface (WIDS) is proposed that achieves spontaneous, rapid, and long-distance transport of viscous liquids. WIDS reduces viscous drag by spatially isolating the viscous liquids and surface roughness through its heterogenous, slippery topological design, and generates capillary forces through its heterogenous wetting distributions. The essential role of surface heterogeneity in viscous liquid transport is theoretically and experimentally verified. Remarkably, such a heterogenous paradigm enables transporting liquids with viscosities exceeding 12 500 mPa s, which is two orders of magnitude higher than state-of-the-art techniques. Furthermore, this heterogenous design is generic for various viscous liquids and can be made flexible, making it promising for various systems that require viscous liquid management, such as micropatterning.

Designing of anisotropic gradient surfaces for directional liquid transport: Fundamentals, construction, and applications

Many biological surfaces are capable of transporting liquids in a directional manner without energy consumption. Inspired by nature, constructing asymmetric gradient surfaces to achieve desired droplet transport, such as a liquid diode, brings an incredibly valuable and promising area of research with a wide range of applications. Enabled by advances in nanotechnology and manufacturing techniques, biomimetics has emerged as a promising avenue for engineering various types of anisotropic material system. Over the past few decades, this approach has yielded significant progress in both fundamental understanding and practical applications. Theoretical studies revealed that the heterogeneous composition and topography mainly govern the wetting mechanisms and dynamics behavior of droplets, including the interdisciplinary aspects of materials, chemistry, and physics. In this review, we provide a concise overview of various biological surfaces that exhibit anisotropic droplet transport. We discussed the theoretical foundations and mechanisms of droplet motion on designed surfaces and reviewed recent research advances in droplet directional transport on designed plane surfaces and Janus membranes. Such liquid-diode materials yield diverse promising applications, involving droplet collection, liquid separation and delivery, functional textiles, and biomedical applications. We also discuss the recent challenges and ongoing approaches to enhance the functionality and application performance of anisotropic materials.

Frictionless multiphasic interface for near-ideal aero-elastic pressure sensing

Conventional pressure sensors rely on solid sensing elements. Instead, inspired by the air entrapment phenomenon on the surfaces of submerged lotus leaves, we designed a pressure sensor that uses the solid-liquid-liquid-gas multiphasic interfaces and the trapped elastic air layer to modulate capacitance changes with pressure at the interfaces. By creating an ultraslippery interface and structuring the electrodes at the nanoscale and microscale, we achieve near-friction-free contact line motion and thus near-ideal pressure-sensing performance. Using a closed-cell pillar array structure in synergy with the ultraslippery electrode surface, our sensor achieved outstanding linearity (R2 = 0.99944 ± 0.00015; nonlinearity, 1.49 ± 0.17%) while simultaneously possessing ultralow hysteresis (1.34 ± 0.20%) and very high sensitivity (79.1 ± 4.3 pF kPa-1). The sensor can operate under turbulent flow, in in vivo biological environments and during laparoscopic procedures. We anticipate that such a strategy will enable ultrasensitive and ultraprecise pressure monitoring in complex fluid environments with performance beyond the reach of the current state-of-the-art.

Removal of Free Liquid Layer from Liquid-Infused Catheters Reduces Silicone Loss into the Environment while Maintaining Adhesion Resistance

Silicone urinary catheters infused with silicone liquid offer an effective alternative to antibiotic coatings, reducing microbial adhesion while decreasing bladder colonization and systemic dissemination. However, loss of free silicone liquid from the surface into the host system is undesirable. To reduce the potential for liquid loss, free silicone liquid was removed from the surface of liquid-infused catheters by either removing excess liquid from fully infused samples or by partial infusion. The effect on bacterial and host protein adhesion was then assessed. Removing the free liquid from fully infused samples resulted in a ~64% decrease in liquid loss into the environment compared to controls, with no significant increase in deposition of the host protein fibrinogen or the adhesion of the common uropathogen Enterococcus faecalis. Partially infusing samples decreased liquid loss as total liquid content decreased, with samples infused to 70-80% of their maximum capacity showing a ~85% reduction in liquid loss compared to fully infused controls. Furthermore, samples above 70% infusion showed no significant increase in fibrinogen or E. faecalis adhesion. Together, the results suggest that eliminating free liquid layer, mechanically or through partial infusion, can reduce liquid loss from liquid-infused catheters while preserving functionality.

Healable Anti-Corrosive and Wear-Resistant Silicone-Oil-Impregnated Porous Oxide Layer of Aluminum Alloy by Plasma Electrolytic Oxidation

Lubricant (or oil)-impregnated porous surface has been considered as a promising surface treatment to realize multifunctionality. In this study, silicone oil was impregnated into a hard porous oxide layer created by the plasma electrolytic oxidation (PEO) of aluminum (Al) alloys. The monolayer of polydimethylsiloxane (PDMS) from silicone oil is formed on a porous oxide layer; thus, a water-repellent slippery oil-impregnated surface is realized on Al alloy, showing a low contact angle hysteresis of less than 5°. This water repellency significantly enhanced the corrosion resistance by more than four orders of magnitude compared to that of the PEO-treated Al alloy without silicone oil impregnation. The silicone oil within the porous oxide layer also provides a lubricating effect to improve wear resistance by reducing friction coefficients from ~0.6 to ~0.1. In addition, because the PDMS monolayer can be restored by frictional heat, the water-repellent surface is tolerant to physical damage to the oxide surface. Hence, the results of this fundamental study provide a new approach for the post-treatment of PEO for Al alloys.

Fluorinated Silane-Modified Filtroporation Devices Enable Gene Knockout in Human Hematopoietic Stem and Progenitor Cells

Intracellular delivery technologies that are cost-effective, non-cytotoxic, efficient, and cargo-agnostic are needed to enable the manufacturing of cell-based therapies as well as gene manipulation for research applications. Current technologies capable of delivering large cargoes, such as plasmids and CRISPR-Cas9 ribonucleoproteins (RNPs), are plagued with high costs and/or cytotoxicity and often require substantial specialized equipment and reagents, which may not be available in resource-limited settings. Here, we report an intracellular delivery technology that can be assembled from materials available in most research laboratories, thus democratizing access to intracellular delivery for researchers and clinicians in low-resource areas of the world. These filtroporation devices permeabilize cells by pulling them through the pores of a cell culture insert by the application of vacuum available in biosafety cabinets. In a format that costs less than $10 in materials per experiment, we demonstrate the delivery of fluorescently labeled dextran, expression plasmids, and RNPs for gene knockout to Jurkat cells and human CD34+ hematopoietic stem and progenitor cell populations with delivery efficiencies of up to 40% for RNP knockout and viabilities of >80%. We show that functionalizing the surfaces of the filters with fluorinated silane moieties further enhances the delivery efficiency. These devices are capable of processing 500,000 to 4 million cells per experiment, and when combined with a 3D-printed vacuum application chamber, this throughput can be straightforwardly increased 6-12-fold in parallel experiments.

Manipulating the Dynamic Adaptivity of a Fluid Interface to Maintain the Multipotency of Mesenchymal Stromal Cells

The native extracellular matrix is highly dynamic with continuous mutual feedback between cells being responsible for many important cell function regulators. However, establishing bidirectional interaction between complex adaptive microenvironments and cells remains elusive. Herein an adaptive biomaterial based on lysozyme monolayers self-assembled at a perfluorocarbon FC40-water interface is reported. The dynamic adaptivity of interfacially assembled protein nanosheets is modulated independently of bulk mechanical properties by covalent crosslinking. This provides a scenario to establish bidirectional interactions of cells with liquid interfaces of varying dynamic adaptivity. This is found that growth and multipotency of human mesenchymal stromal cells (hMSCs) are enhanced at the highly adaptive fluid interface. The multipotency retention of hMSCs is mediated by low cell contractility and metabolomic activity involving the continuous mutual feedback between the cells and materials. Consequently, an understanding of the cells' response to dynamic adaptivity has substantial implications for regenerative medicine and tissue engineering.

Ice-Inspired Polymeric Slippery Surface with Excellent Smoothness, Stability, and Antifouling Properties

Ice is omnipresent in our daily life and possesses intrinsic slipperiness as a result of the formation of a quasi-liquid layer. Thus, the functional surfaces inspired by ice show great prospects in widespread fields from surface lubrication to antifouling coatings. Herein, we report an ice-inspired polymeric slippery surface (II-PSS) constructed by a self-lubricating liquid layer and a densely surface-grafted polymer brush. The polymer brush layer could act as a homogeneous matrix to capture lubricant molecules via strong and dynamic dipole-dipole interactions to form a stable quasi-liquid layer that resembles the ice surface. The II-PSS can be easily fabricated on various solid substrates (e.g., silicon, glass, aluminum oxide, plastics, etc.) with excellent smoothness (roughness of ∼0.4 nm), optical transmittance (∼94.5%), as well as repellence toward diverse liquids with different surface tensions (22.3-72.8 mN m-1), pH values (1-14), salinity, and organic pollutants. Further investigation shows that the II-PSS exhibits extremely low attachment for proteins and marine organisms (e.g., algae and mussels) for over one month. These results demonstrate a robust and promising strategy for high-performance antifouling coatings.

Characterizing Surface Ice-Philicity Using Molecular Simulations and Enhanced Sampling

The formation of ice, which plays an important role in diverse contexts ranging from cryopreservation to atmospheric science, is often mediated by solid surfaces. Although surfaces that interact favorably with ice (relative to liquid water) can facilitate ice formation by lowering nucleation barriers, the molecular characteristics that confer icephilicity to a surface are complex and incompletely understood. To address this challenge, here we introduce a robust and computationally efficient method for characterizing surface ice-philicity that combines molecular simulations and enhanced sampling techniques to quantify the free energetic cost of increasing surface-ice contact at the expense of surface-water contact. Using this method to characterize the ice-philicity of a family of model surfaces that are lattice matched with ice but vary in their polarity, we find that the nonpolar surfaces are moderately ice-phobic, whereas the polar surfaces are highly ice-philic. In contrast, for surfaces that display no complementarity to the ice lattice, we find that ice-philicity is independent of surface polarity and that both nonpolar and polar surfaces are moderately ice-phobic. Our work thus provides a prescription for quantitatively characterizing surface ice-philicity and sheds light on how ice-philicity is influenced by lattice matching and polarity.

Water Drop Evaporation on Slippery Liquid-Infused Porous Surfaces (SLIPS): Effect of Lubricant Thickness, Viscosity, Ridge Height, and Pattern Geometry

Sessile drop evaporation and condensation on slippery liquid-infused porous surfaces (SLIPS) is crucial for many applications. However, its modeling is complex since the infused lubricant forms a wetting ridge around the drop close to the contact line, which partially blocks the free surface area and decreases the drop evaporation rate. Although a good model was available after 2015, the effects of initial lubricant heights (h_oil)_i above the pattern, and the corresponding initial ridge heights (h_r)_i, lubricant viscosity, and solid pattern type were not well studied. This work fills this gap where water drop evaporations from SLIPS, which are obtained by infusing silicone oils (20 and 350 cSt) onto hydrophobized Si wafer micropatterns having both cylindrical and square prism pillars, are investigated under constant relative humidity and temperature conditions. With the increase of (h_oil)_i, the corresponding (h_r)_i increased almost linearly on lower parts of the drops for all SLIPS samples, resulting in slower drop evaporation rates. A novel diffusion-limited evaporation equation from SLIPS is derived depending on the available free liquid-air interfacial area, A_LV, which represents the unblocked part of the total drop surface. The calculation of the diffusion constant, D, of water vapor in air from (dA_LV/dt) values obtained by drop evaporation was successful up to a threshold value of (h_oil)_i = 8 μm within ±7%, and large deviations (13-27%) were obtained when (h_oil)_i > 8 μm, possibly due to the formation of thin silicone oil cloaking layers on drop surfaces, which partially blocked evaporation. The increase of infused silicone oil viscosity caused only a slight increase (12-17%) in drop lifetimes. The effects of the geometry and size of the pillars on the drop evaporation rates were minimal. These findings may help optimize the lubricant oil layer thickness and viscosity used for SLIPS to achieve low operational costs in the future.

Droplet Memory on Liquid-Infused Surfaces

The knowledge of droplet friction on liquid-infused surfaces (LIS) is of paramount importance for applications involving liquid manipulation. While the possible dissipation mechanisms are well-understood, the effect of surface texture has thus far been mainly investigated on LIS with highly regular solid topographies. In this work, we aim to address this experimental gap by studying the friction experienced by water droplets on LIS based on both random and regular polysilsesquioxane nanostructures. We show that the available models apply to the tested surfaces, but we observe a previously unreported droplet memory effect: as consecutive droplets travel along the same path, their velocity increases up to a plateau value before returning to the original state after a sufficiently long time. We study the features of this phenomenon by evaluating the motion of droplets when they cross the path of a previous sequence of droplets, discovering that moving droplets create a low-friction trace in their wake, whose size matches their base diameter. Finally, we attribute this to the temporary smoothing out of an initially conformal lubricant layer by means of a Landau-Levich-Derjaguin liquid film deposition behind the moving droplet. The proposed mechanism might apply to any LIS with a conformal lubricant layer.

Liquid NanoBiosensors Enable One-Pot Electrochemical Detection of Bacteria in Complex Matrices

There is a need for point-of-care bacterial sensing and identification technologies that are rapid and simple to operate. Technologies that do not rely on growth cultures, nucleic acid amplification, step-wise reagent addition, and complex sample processing are the key for meeting this need. Herein, multiple materials technologies are integrated for overcoming the obstacles in creating rapid and one-pot bacterial sensing platforms. Liquid-infused nanoelectrodes are developed for reducing nonspecific binding on the transducer surface; bacterium-specific RNA-cleaving DNAzymes are used for bacterial identification; and redox DNA barcodes embedded into DNAzymes are used for binding-induced electrochemical signal transduction. The resultant single-step and one-pot assay demonstrates a limit-of-detection of 10² CFU mL^-1 , with high specificity in identifying Escherichia coli amongst other Gram positive and negative bacteria including Klebsiella pneumoniae, Staphylococcus aureus, and Bacillus subtilis. Additionally, this assay is evaluated for analyzing 31 clinically obtained urine samples, demonstrating a clinical sensitivity of 100% and specify of 100%. When challenging this assay with nine clinical blood cultures, E. coli-positive and E. coli-negative samples can be distinguished with a probability of p < 0.001.

Dropwise Condensation in Ambient on a Depleted Lubricant-Infused Surface

Durability of a lubricant-infused surface (LIS) is critical for heat transfer, especially in condensation-based applications. Although LIS promotes dropwise condensation, each departing droplet condensate acts as a lubricant-depleting agent due to the formation of wetting ridge and cloaking layer around the condensate, thus gradually leading to drop pinning on the underlying rough topography. Condensation heat transfer further deteriorates in the presence of non-condensable gases (NCGs) requiring special experimental arrangements to eliminate NCGs due to a decrease in the availability of nucleation sites. To address these issues while simultaneously improving heat-transfer performance of LIS in condensation-based systems, we report fabrication of both fresh LIS and a lubricant-depleted LIS using silicon porous nanochannel wicks as an underlying substrate. Strong capillarity in the nanochannels helps retain silicone oil (polydimethylsiloxane) on the surface even after it is severely depleted under tap water. The effect of oil viscosity was investigated for drop mobility and condensation heat transfer under ambient conditions, i.e., in the presence of NCGs. While fresh LIS prepared using 5 cSt silicone oil exhibited a low roll-off angle (∼1°) and excellent water drop (5 μL) sliding velocity ∼66 mm s^-1, it underwent rapid depletion as compared to higher viscosity oils. Condensation performed on depleted nanochannel LIS with higher viscosity oil (50 cSt) resulted in a heat-transfer coefficient (HTC) of ∼2.33 kW m^-2 K^-1, which is a ∼162% improvement over flat Si-LIS (50 cSt). Such LIS promote fast drop shedding as is evident from the little change in the fraction of drops with diameter <500 μm from ∼98% to only ∼93% after 4 h of condensation. Improvement in HTC was also seen in condensation experiments conducted for 3 days where a steady HTC of ∼1.46 kW m^-2 K^-1 was achieved over the last 2 days. The ability of reported LIS to maintain long-term hydrophobicity and dropwise condensation will aid in designing condensation-based systems with improved heat-transfer performance.

Design of medical tympanostomy conduits with selective fluid transport properties

Implantable tubes, shunts, and other medical conduits are crucial for treating a wide range of conditions from ears and eyes to brain and liver but often impose serious risks of device infection, obstruction, migration, unreliable function, and tissue damage. Efforts to alleviate these complications remain at an impasse because of fundamentally conflicting design requirements: Millimeter-scale size is required to minimize invasiveness but exacerbates occlusion and malfunction. Here, we present a rational design strategy that reconciles these trade-offs in an implantable tube that is even smaller than the current standard of care. Using tympanostomy tubes (ear tubes) as an exemplary case, we developed an iterative screening algorithm and show how unique curved lumen geometries of the liquid-infused conduit can be designed to co-optimize drug delivery, effusion drainage, water resistance, and biocontamination/ingrowth prevention in a single subcapillary-length-scale device. Through extensive in vitro studies, we demonstrate that the engineered tubes enabled selective uni- and bidirectional fluid transport; nearly eliminated adhesion and growth of common pathogenic bacteria, blood, and cells; and prevented tissue ingrowth. The engineered tubes also enabled complete eardrum healing and hearing preservation and exhibited more efficient and rapid antibiotic delivery to the middle ear in healthy chinchillas compared with current tympanostomy tubes, without resulting in ototoxicity at up to 24 weeks. The design principle and optimization algorithm presented here may enable tubes to be customized for a wide range of patient needs.

Slippery Alkoxysilane Coatings for Antifouling Applications

Herein, we report the wettability and antifouling behavior of a range of different siloxane coatings on plastic and glass substrates. The films investigated are prepared using trimethoxysilane precursors with different alkyl chain lengths (1-18 C atoms) in order to study how the nature of the hydrophobic group affects the different parameters used to characterize wettability (contact angles, sliding angles, and contact angle hysteresis). Atomic force microscopy analysis shows that the coatings possess low surface topography [root mean squared roughness (rms) < 50 nm] and are highly transparent as studied using UV-vis spectroscopy. The sliding properties of H₂O, CH₂I₂, methanol, and ethylene glycol were observed to be strongly influenced by the chain length of the alkoxysilane precursor used. The coatings formed from the longer chain analogues show comparable water sliding angles to superhydrophobic surfaces. These coatings show similar performance to analogous alkoxysilane coating-bearing fluorinated groups, indicating that they could act as viable environmentally friendly alternatives to some of the fluorinated films that have been widely adopted. Furthermore, these surfaces are highly durable toward common forms of abrasion and are observed to show low adhesion toward synthetic feces, indicating that their utility extends further than repelling liquids alone. Consequently, these coatings could show promise for potential use in applications in the medical sector where fouling by biological mixtures leads to an unsustainable use of materials.

Bio-Inspired Active Self-Cleaning Surfaces via Filament-Like Sweepers Array

Hydrodynamic forces from moving fluids can be utilized to remove contaminants which is an ideal fouling-release strategy for underwater surfaces. However, the hydrodynamic forces in the viscous sublayer are greatly reduced owing to the no-slip condition, which restricts their practical applications. Here, inspired by sweeper tentacles of corals, an active self-cleaning surface with flexible filament-like sweepers are reported. The sweepers can penetrate the viscous sublayer by utilizing energy from outer turbulent flows and remove contaminants with adhesion strength of >30 kPa. Under an oscillating flow, the removal rate of the single sweeper can reach up to 99.5% due to dynamic buckling movements. In addition, the sweepers array can completely clean its coverage area within 10 s through coordinated movements as symplectic waves. The active self-cleaning surface depends on the fluid-structure coupling between sweepers and flows, which breaks the concept of conventional self-cleaning.

Synthesis and Surface Properties of Piperidinium-Based Herbicidal Ionic Liquids as a Potential Tool for Weed Control

A series of piperidinium-based herbicidal ionic liquids (HILs) were synthesized and investigated. The designed HILs, obtained with high yields, consisted of cation 1-alkyl-1-methylpiperidinium with surface activity and a commercially available herbicidal anion: (3,6-dichloro-2-methoxy)benzoates (dicamba). The above-mentioned compounds were characterized in terms of surface activity and phytotoxicity. Preliminary results were obtained at higher wettability for all HILs when compared to the wettability of commercial Dicash, with HIL having 18 atoms in the carbon chain being the best effectiveness in wetting surfaces (weeds and crop leaves), whereby a drop of HILs with short alkyl chains (C₈-C₁₀) could not slide down a leaf. Our findings present that wettability or mobility of HILs drops varied depending on the plant species. Moreover, in this study, by zeta potential and atomic force microscopy measurements, we provide conclusive evidence to demonstrate that alkyl chain elongation plays a significant role in the evolution of surface properties of HILs.

Laminar drag reduction ability of liquid-infused microchannels by considering different infused lubricants

We numerically investigate the pressure drop reduction (PDR) performance of microchannels equipped with liquid-infused surfaces, along with determining the shape of the interface between the working fluid and lubricant within the microgrooves. The effects of different parameters, such as the Reynolds number of working fluid, density and viscosity ratios between the lubricant and working fluid, the ratio of the thickness of the lubricant layer over the ridges to the depth of the groove, and the Ohnesorge number as a representative of the interfacial tension, on the PDR and interfacial meniscus within the microgrooves are comprehensively studied. The results reveal that the density ratio and Ohnesorge number do not significantly affect the PDR. On the other hand, the viscosity ratio considerably affects the PDR, and a maximum PDR of 62% compared to a smooth non-lubricated microchannel is achieved for a viscosity ratio of 0.01. Interestingly, the higher the Reynolds number of the working fluid, the higher the PDR. The meniscus shape within the microgrooves is strongly affected by the Reynolds number of the working fluid. Despite the insignificant effect of interfacial tension on the PDR, the interface shape within the microgrooves is appreciably influenced by this parameter.

Cost-Effective Droplet Generator for Portable Bio-Applications

The convenient division of aqueous samples into droplets is necessary for many biochemical and medical analysis applications. In this article, we propose the design of a cost-effective droplet generator for potential bio-chemical application, featuring two symmetric tubes. The new droplet generator revisits the relationship between capillary components and liquid flow rates. The size of generated droplets by prototype depends only on generator dimensions, without precisely needing to control external flow conditions or driving pressure, even when the relative extreme difference in flow rate for generating nL level droplets is over 57.79%, and the relative standard deviation (RSD) of the volume of droplets is barely about 9.80%. A dropper working as a pressure resource is used to verify the rapidity and robustness of this principle of droplet generation, which shows great potential for a wide range of droplet-based applications.

Self-Healing, Robust, Liquid-Repellent Coatings Exploiting the Donor-Acceptor Self-Assembly

Liquid-repellent coatings with rapid self-healing and strong substrate adhesion have tremendous potential for industrial applications, but their formulation is challenging. We exploit synergistic chemistry between donor-acceptor self-assembly units of polyurethane and hydrophobic metal-organic framework (MOF) nanoparticles to overcome this challenge. The nanocomposite features a nanohierarchical morphology with excellent liquid repellence. Using polyurethane as a base polymer, the incorporated donor-acceptor self-assembly enables high strength, excellent self-healing property, and strong adhesion strength on multiple substrates. The interaction mechanism of donor-acceptor self-assembly was revealed via density functional theory and infrared spectroscopy. The superhydrophobicity of polyurethane was achieved by introducing alkyl-functionalized MOF nanoparticles and post-application silanization. The combination of the self-healing polymer and nanohierarchical MOF nanoparticles results in self-cleaning capability, resistance to tape peel and high-speed liquid jet impacts, recoverable liquid repellence over a self-healed notch, and low ice adhesion up to 50 icing/deicing cycles. By exploiting the porosity of MOF nanoparticles in our nanocomposites, fluorine-free, slippery liquid-infused porous surfaces with stable, low ice adhesion strengths were also achieved by infusing silicone oil into the coatings.

Bio-Based Waterborne Polyurethane Coatings with High Transparency, Antismudge and Anticorrosive Properties

Green and environment-friendly preparation are of the utmost relevance to the development of transparent antismudge coatings. To prepare a waterborne polyurethane (WPU) coating with antismudge property, it is challenging to balance the stability of dispersion and the antismudge property of coating. Herein, we prepare a transparent bio-based WPU coating grafted with a minor proportion of poly(dimethylsiloxane) (WPU-g-PDMS) using renewable castor oil, monocarbinol-terminated PDMS, hexamethylene diisocyanate trimer, and 2,2-bis(hydroxymethyl)propionic acid as raw materials. Effects of the dosage of monocarbinol-terminated PDMS, the curing temperature, and the curing time on the antismudge performance were studied. Results showed that rigorous stirring (3000 rpm) is necessary to obtain a stable WPU-g-PDMS dispersion with a storage time longer than 6 months. A high curing temperature (>160 °C) and a period of curing time (>1 h) are indispensable to obtain the excellent antismudge property because they would facilitate the grafted low-surface-tension PDMS chains to migrate from the interior to the coating surface. The facts that simulated contaminated liquids such as water, HCl solution, NaOH solution, artificial blood, and tissue fluid could slide off easily and cleanly, and marker ink lined on the coating surface could shrink, indicated that the WPU-g-PDMS coating has good antismudge properties, which could be self-compensated shortly after deterioration. Due to the high cross-linking degree caused by multifunctional polyol and isocyanate, the WPU-g-PDMS coating has high hardness and good anticorrosive performance. The antismudge functionalization and waterborne technology of bio-based polyurethane coatings proposed in this work could be a promising contribution to the green and sustainable development of functional coatings. This kind of WPU-g-PDMS coating is expected to protect and decorate electronic screens, vehicles, and buildings, especially endoscopes.

Photo-Thermal Superhydrophobic Sponge for Highly Efficient Anti-Icing and De-Icing

Ice accretion always brings much inconvenience in the field of production and life. How to anti-ice or de-ice easily on solid surfaces becomes research focus in the engineering material fields. In this work, a kind of photo-thermal superhydrophobic polyurethane sponge (PSP-SPONGE) was developed by depositing Fe₃O₄ nanoparticles and polydopamine and simple fluorination treatment to realize anti-icing and de-icing fast under faint sunlight irradiation. Utilizing the thermal insulation of porous PSP-SPONGE, the photo-thermal energy was located at the sunlight irradiation area, which heated PSP-SPONGE surface rapidly under sunlight irradiation in cold surroundings. Water droplets on PSP-SPONGE surface would never freeze under faint 0.3 kW/m² ("0.3 sun") sunlight illumination in -30 °C damp surroundings, and the ice melts entirely within 18 min under "1 sun" illumination. Furthermore, PSP-SPONGE has excellent self-cleaning and self-healing properties that can cope with the complex and volatile natural environment to guarantee durable anti-icing and de-icing performances. The simulated outdoor snow removal test also proved that snow on PSP-SPONGE surface could melt under "0.5 sun" sunlight illumination in -30 °C damp surroundings. The PSP-SPONGE fabricated with simple preparation and easy access has wide application prospects in anti-icing and de-icing.

In Situ Opto-Hydrodynamic Characterization of Lubricant-Infused Surface Degradation

Vapor condensation is widely used in industrial systems due to its effective heat and mass transfer when compared to single-phase thermal transport. In particular, dropwise condensation can significantly enhance heat transfer performance due to rapid droplet shedding and promotion of additional nucleation sites for vapor condensation. Recently, lubricant-infused surfaces (LISs) composed of superhydrophobic structures infused with a low surface tension lubricant have been shown to effectively promote dropwise condensation of a variety of fluids by forming chemically and topographically homogeneous low-surface-energy surfaces. However, depletion of the infused lubricant remains a critical limitation to developing durable LISs which can sustain prolonged dropwise condensation. Moreover, the observed degradation is difficult to detect especially during active condensation on the surface. Here, we introduce an optical measurement technique to quantify in situ and in operando lubricant drainage from LISs. The optical method allows for non-invasive, instantaneous, and accurate prediction of the lifespan of LISs. The method implements the analysis of sample transient transparency, with depletion leading to exposure of the structure and increased light scattering. Our work demonstrates the logarithmic relation between the amount of the lubricant remaining in the LIS and the optical transmittance of the LIS, validating our unique technique for estimating the durability of LISs.

Antibacterial features of material surface: strong enough to serve as antibiotics?

Bacteria are small but need big efforts to control. The use of antibiotics not only produces superbugs that are increasingly difficult to inactivate, but also raises environmental concerns with the growing consumption. It is now believed that the antibacterial task can count on some physiochemical features of material surfaces, which can be anti-adhesive or bactericidal without releasing toxicants. It is necessary to evaluate to what extent can we rely on the surface design since the actual application scenarios will need the antibacterial performance to be sharp, robust, environmentally friendly, and long-lasting. Herein, we review the recent laboratory advances that have been classified based on the specific surface features, including hydrophobicity, charge potential, micromorphology, stiffness and viscosity, and photoactivity, and the antibacterial mechanisms of each feature are included to provide a basic rationale for future design. The significance of anti-biofilms is also introduced, given the big role of biofilms in bacteria-caused damage. A perspective on the potential wide application of antibacterial surface features as a substitute or supplement to antibiotics is then discussed. Surface design is no doubt a solution worthy to explore, and future success will be a result of further progress in multiple directions, including mechanism study and material preparation.

Highly Stable Hierarchically Structured All-Polymeric Lubricant-Infused Films Prevent Thrombosis and Repel Multidrug-Resistant Pathogens

Thrombus formation and infections caused by bacterial adhesion are the most common causes of failure in blood-contacting medical devices. Reducing the interaction of pathogens using repellent surfaces has proven to be a successful strategy in preventing device failure. However, designing scale-up methodologies to create large-scale repellent surfaces remains challenging. To address this need, we have created an all-polymeric lubricant-infused system using an industrially viable swelling-coagulation solvent (S-C) method. This induces hierarchically structured micro/nano features onto the surface, enabling improved lubricant infusion. Poly(3,3,3-trifluoropropylmethylsiloxane) (PTFS) was used as the lubricant of choice, a previously unexplored omniphobic nonvolatile silicone oil. This resulted in all-polymeric liquid-infused surfaces that are transparent and flexible with long-term stability. Repellent properties have been demonstrated using human whole blood and methicillin-resistant Staphylococcus aureus (MRSA) bacteria matrices, with lubricated surfaces showing 93% reduction in blood stains and 96.7% reduction in bacterial adherence. The developed material has the potential to prevent blood and pathogenic contamination for a range biomedical devices within healthcare settings.

Special Superwetting Materials from Bioinspired to Intelligent Surface for On-Demand Oil/Water Separation: A Comprehensive Review

Since superwetting surfaces have emerged, on-demand oil/water separation materials serve as a new direction for meeting practical needs. This new separation mode uses a single porous material to allow oil-removing and water-removing to be achieved alternately. In this review, the fundamentals of wettability are systematically summarized in oil/water separation. Most importantly, the two states, bioinspired surface and intelligent surface, are summarized for on-demand oil/water separation. Specifically, bioinspired surfaces include micro/nanostructures, bioinspired chemistry, Janus-featured surfaces, and dual-superlyophobic surfaces that these superwetting materials can possess asymmetric wettability in one structure system or opposite underliquid wettability by prewetting. Furthermore, an intelligent surface can be adopted by various triggers such as pH, thermal and photo stimuli, etc., to control wettability for switchable oil/water separation reversibly, expressing a thought beyond nature to realize innovative oil/water separation by external stimuli. Remarkably, this review also discusses the advantages of all the materials mentioned above, expanding the separation scope from the on-demand oil/water mixtures to the multiphase immiscible liquid-liquid mixtures. Finally, the prospects of on-demand oil/water separation materials are also concluded.

Patterning Wettability for Open-Surface Fluidic Manipulation: Fundamentals and Applications

Effective manipulation of liquids on open surfaces without external energy input is indispensable for the advancement of point-of-care diagnostic devices. Open-surface microfluidics has the potential to benefit health care, especially in the developing world. This review highlights the prospects for harnessing capillary forces on surface-microfluidic platforms, chiefly by inducing smooth gradients or sharp steps of wettability on substrates, to elicit passive liquid transport and higher-order fluidic manipulations without off-the-chip energy sources. A broad spectrum of the recent progress in the emerging field of passive surface microfluidics is highlighted, and its promise for developing facile, low-cost, easy-to-operate microfluidic devices is discussed in light of recent applications, not only in the domain of biomedical microfluidics but also in the general areas of energy and water conservation.

Nature-Inspired High Temperature Scale-Resistant Slippery Lubricant-Induced Porous Surfaces (HTS-SLIPS)

Scale formation is a longstanding and unresolved problem in a number of fields, including power production, petroleum exploration, thermal desalination, and construction. Herein, a high-temperature scale-resistant slippery lubricant-induced surface (HTS-SLIPS) is developed by one-step electrodeposition and lubricant infusion. The fractal cauliflower-like morphology with lubricant oil is conducive to forming an ultralow contact angle hysteresis of ≈1°. The 10-d real-world boiling trial indicates that by replacing the uncoated surface with HTS-SLIPS, the reduction in scale mass is greater than 200% because of the low surface free energy (4.3 mJ m^-2 ) and outstanding smoothness (R_a  = 41 ± 8 nm) of HTS-SLIPS. Thanks to the scale retardation, the bubble departure frequency of HTS-SLIPS is eightfold higher than that of uncoated surfaces, signifying superior heat transfer efficiency. In these demonstrations, HTS-SLIPS coated spiral tube exhibits better flowability and lower pressure drop than the uncoated one. In addition, favorable compatibility between HTS-SLIPS and mechanical vibration is experimentally verified to strengthen the descaling of SLIPS synergistically. It is anticipated that the simple and scalable coating fabrication approach will be applicable in numerous industrial high-temperature processes where scale formation is encountered.

Bio-inspired materials to control and minimise insect attachment

More than three quarters of all animal species on Earth are insects, successfully inhabiting most ecosystems on the planet. Due to their opulence, insects provide the backbone of many biological processes, but also inflict adverse impacts on agricultural and stored products, buildings and human health. To countermeasure insect pests, the interactions of these animals with their surroundings have to be fully understood. This review focuses on the various forms of insect attachment, natural surfaces that have evolved to counter insect adhesion, and particularly features recently developed synthetic bio-inspired solutions. These bio-inspired solutions often enhance the variety of applicable mechanisms observed in nature and open paths for improved technological solutions that are needed in a changing global society.

A review on control of droplet motion based on wettability modulation: principles, design strategies, recent progress, and applications

The transport of liquid droplets plays an essential role in various applications. Modulating the wettability of the material surface is crucial in transporting droplets without external energy, adhesion loss, or intense controllability requirements. Although several studies have investigated droplet manipulation, its design principles have not been categorized considering the mechanical perspective. This review categorizes liquid droplet transport strategies based on wettability modulation into those involving (i) application of driving force to a droplet on non-sticking surfaces, (ii) formation of gradient surface chemistry/structure, and (iii) formation of anisotropic surface chemistry/structure. Accordingly, reported biological and artificial examples, cutting-edge applications, and future perspectives are summarized.

The Liquid Young's Law on SLIPS: Liquid-Liquid Interfacial Tensions and Zisman Plots

Slippery liquid-infused porous surfaces (SLIPS) are an innovation that reduces droplet-solid contact line pinning and interfacial friction. Recently, it has been shown that a liquid analogue of Young's law can be deduced for the apparent contact angle of a sessile droplet on SLIPS despite there never being contact by the droplet with the underlying solid. Since contact angles on solids are used to characterize solid-liquid interfacial interactions and the wetting of a solid by a liquid, it is our hypothesis that liquid-liquid interactions and the wetting of a liquid surface by a liquid can be characterized by apparent contact angles on SLIPS. Here, we first present a theory for deducing liquid-liquid interfacial tensions from apparent contact angles. This theory is valid irrespective of whether or not a film of the infusing liquid cloaks the droplet-vapor interface. We show experimentally that liquid-liquid interfacial tensions deduced from apparent contact angles of droplets on SLIPS are in excellent agreement with values from the traditional pendant drop technique. We then consider whether the Zisman method for characterizing the wettability of a solid surface can be applied to liquid surfaces created using SLIPS. We report apparent contact angles for a homologous series of alkanes on Krytox-infused SLIPS and for water-IPA mixtures on both the Krytox-infused SLIPS and a silicone oil-infused SLIPS. The alkanes on the Krytox-infused SLIPS follow a linear relationship in the liquid form of the Zisman plot provided that the effective droplet-vapor interfacial tension is used. All three systems follow a linear relationship on a modified Zisman plot. We interpret these results using the concept of the critical surface tension (CST) for the wettability of a solid surface introduced by Zisman. In our liquid surface case, the obtained critical surface tensions were found to be lower than the infusing liquid-vapor surface tensions.