Writing on polymer chains

Using Nitroxides To Model the Ion Mobility Behavior of Nitroxide-Ended Oligomers: A Bottom-up Approach To Predict Mobility Separation

Block-truncated poly(phosphodiester)s are digital macromolecules storing binary information that can be decoded by MS/MS sequencing of individual blocks released as primary fragments of the entire polymer. As such, they are ideal species for the serial sequencing methodology enabled by MS-(CID)-IMS-(CID)-MS coupling, where two activation stages are combined in-line with ion mobility spectrometry (IMS) separation. Yet, implementation of this coupling still requires efforts to achieve IMS resolution of inner blocks, that can be considered as small oligomers with α termination composed of one nitroxide decorated with a different tag. As shown by molecular dynamics simulation, these oligomers adopt a conformation where the tag points out of the coil formed by the chain. Accordingly, the sole nitroxide termination was investigated here as a model to reduce the cost of calculation aimed at predicting the shift of collision cross-section (CCS) induced by new tag candidates and extrapolate this effect to nitroxide-terminated oligomers. A library of 10 nitroxides and 7 oligomers was used to validate our calculation methods by comparison with experimental IMS data as well as our working assumption. Based on conformation predicted by theoretical calculation, three new tag candidates could be proposed to achieve the +40 Å2 CCS shift required to ensure IMS separation of oligomers regardless of their coded sequence.

Mapping Composition Evolution through Synthesis, Purification, and Depolymerization of Random Heteropolymers

Random heteropolymers (RHPs) consisting of three or more comonomers have been routinely used to synthesize functional materials. While increasing the monomer variety diversifies the side-chain chemistry, this substantially expands the sequence space and leads to ensemble-level sequence heterogeneity. Most studies have relied on monomer composition and simulated sequences to design RHPs, but the questions remain unanswered regarding heterogeneities within each RHP ensemble and how closely these simulated sequences reflect the experimental outcomes. Here, we quantitatively mapped out the evolution of monomer compositions in four-monomer-based RHPs throughout a design-synthesis-purification-depolymerization process. By adopting a Jaacks method, we first determined 12 reactivity ratios directly from quaternary methacrylate RAFT copolymerization experiments to account for the influences of competitive monomer addition and the reversible activation/deactivation equilibria. The reliability of in silico analysis was affirmed by a quantitative agreement (<4% difference) between the simulated RHP compositions and the experimental results. Furthermore, we mapped out the conformation distribution within each ensemble in different solvents as a function of monomer chemistry, composition, and segmental characteristics via high-throughput computation based on self-consistent field theory (SCFT). These comprehensive studies confirmed monomer composition as a viable design parameter to engineer RHP-based functional materials as long as the reactivity ratios are accurately determined and the livingness of RHP synthesis is ensured.

Effect of Film Thickness on the Self-Assembly of CBABC Symmetric Pentablock Terpolymer Melts under 1D Confinement: A Dissipative Particle Dynamic Study

The study investigates the impact of film thickness on the phase behavior of pentablock terpolymers, denoted as C3B3A6B3C3, when subjected to wall confinement by utilizing the dissipative particle dynamics method. Phase diagrams were constructed to elucidate how factors such as block-block interaction strength, film thickness, and wall properties affect the self-assembly structures. In cases where the wall exhibits no preference for any of the blocks, lamellae phases with orientations perpendicular to the wall are observed. The order-disorder transition (ODT) temperature is found to be influenced by the interaction between the polymer and the wall in thin confinement scenarios. When the wall displays a preference for specific blocks, the orientation of lamellae structures undergoes variations. Lamellae tend to align parallel to the wall when the wall favors A or C blocks, and they orient perpendicularly when B blocks are favored. Furthermore, the mechanical properties of the lamellae structures are related to the conformations of the polymer chains. Structures where chains predominantly adopt a loop conformation exhibit enhanced elastic properties. The ratio of looping to bridging conformations can be adjusted by altering the film thickness and wall selectivity.

1,3-Pentadiene-Assistant Living Anionic Terpolymerization: Composition Impact on Kinetics and Microstructure Sequence Primary Analysis

The combination of a living anionic technology and a unique alternating strategy provided an exciting opportunity to prepare novel and well-defined poly(1,3-pentadiene-co-syrene-co-1,1-diphenylethylene) resins consisting of three alternating sequences of modules (A/B/C zwitterions). "A" being Styrene (St)/1,3-pentadiene (PD), "B" being diphenylethylene (DPE)/PD, "A" being DPE/St, respectively, A wide composition range of new polyolefin resins, i.e., poly (A-co-B), poly (A-co-C), and poly (B-co-C), with controlled molecular weight and very narrow molecular weight and composition distributions have been prepared by a one-pot living characteristic method. In the section of kinetic analysis, the terpolymer yields and kinetic parameters were strongly dependent on the feed/comonomer ratio as well as the content of the alternating structure. The competition copolymerization behaviors of A/B, B/C, and A/C were studied in detail in this work. By contrast, the microstructure and the thermal property of the resulting terpolymer were investigated via Nuclear magnetic resonance (NMR) and Differential scanning calorimetry (DSC) analysis. The results of 1H NMR tracking the change of [Aromatic ring]/[C=C] value indicated the distinctive copolymer-ization behavior of the selective "alternating-modules". The glass transition temperature (T_g) was very sensitive to the terpolymer composition. By contrast to poly(A-ran-B) with only one obvious T_g, there were two T_gs in the A/C and B/C copolymerization cases. Moreover, the desirable high T_g ~ 140 °C resin was limited to the terpolymers with up to 50 mol % DPE. Finally, the "ABC-X" mechanism was proposed to interpret the unique terpolymerization behavior, which belongs to the classical "bond-forming initiation" theory.

Effect of Chain Structure on the Various Properties of the Copolymers of Fluorinated Norbornenes with Cyclooctene

Fluorinated polymers are attractive due to their special thermal, surface, gas separation, and other properties. In this study, new diblock, multiblock, and random copolymers of cyclooctene with two fluorinated norbornenes, 5-perfluorobutyl-2-norbornene and N-pentafluorophenyl-exo-endo-norbornene-5,6-dicarboximide, are synthesized by ring-opening metathesis copolymerization and macromolecular cross-metathesis in the presence of the first- to third-generation Grubbs' Ru-catalysts. Their thermal, surface, bulk, and solution characteristics are investigated and compared using differential scanning calorimetry, water contact angle measurements, gas permeation, and light scattering, respectively. It is demonstrated that they are correlated with the chain structure of the copolymers. The properties of multiblock copolymers are generally closer to those of diblock copolymers than of random ones, which can be explained by the presence of long blocks capable of self-organization. In particular, diblock and multiblock fluorine-imide-containing copolymers show a tendency to form micelles in chloroform solutions well below the overlap concentration. The results obtained may be of interest to a wide range of researchers involved in the design of functional copolymers.

Digital synthetic polymers for information storage

Digital synthetic polymers with uniform chain lengths and defined monomer sequences have recently become intriguing alternatives to traditional silicon-based information devices or natural biomacromolecules for data storage. The structural diversity of information-containing macromolecules endows the digital synthetic polymers with higher stability and storage density but less occupied space. Through subtly designing each unit of coded structure, the information can be readily encoded into digital synthetic polymers in a more economical scheme and more decodable, opening up new avenues for molecular digital data storage with high-level security. This tutorial review summarizes recent advances in salient features of digital synthetic polymers for data storage, including encoding, decoding, editing, erasing, encrypting, and repairing. The current challenges and outlook are finally discussed to offer potential solution guidance and new perspectives for the creation of next-generation digital synthetic polymers and broaden the scope of their applicability.

A helical oncolytic polypeptide with potent membranolytic activity for cancer therapy

Oncolytic peptides (OLPs) with membranolytic activity show great potential to combat multidrug-resistant cancer cells. Herein, we report a cationic helical oncolytic polypeptide (OLPP) with potent membranolytic activity for cancer therapy. The OLPP was synthesized by ring-opening polymerization of N-carboxyanhydrides (NCAs) and thiol-ene reaction. The OLPP was resistant to protease, showed high cytotoxicity to a series of cancer cells and caused cancer cell necrosis by quickly lysing cancer cell membrane independent of classic death-related intracellular pathways. Intra-tumoral injection of the OLPP effectively suppressed tumor growth in mice through the direct oncolytic effect. The OLPP represents a potential oncolytic chemotherapeutics for cancer therapy.

Lewis Acids Activated Spontaneous Alternating Copolymerization of Maleic Anhydride and Styrene Derivatives

Synthesis of maleic anhydride (MA) and styrene (St) copolymers possessing ultra-high molecular weight, strictly alternating regularity and high glass transition temperature simultaneously is still an issure with great challenge. Herein, the spontaneous alternating copolymerization of MA and St derivatives were investigated by using various Lewis acids. In the presence of alkyl aluminum or butyl magnesium, the MA-St alternating copolymers with ultra-high molecular weight (M_n ≤166.5×10⁴ ) and high glass transition temperature (211 °C≤T_g ≤216 °C) were produced and the microstructure of MA-St copolymers were analyzed by ¹ H and ¹³ C NMR spectra. The copolymerizations of MA with St derivatives, including divinylbenzene, p-butenyl styrene, p-methoxystyrene, trans-anethole, p-fluorostyrene and p-chlorostyrene, also were explored by using AlOctyl₃ as an activator in toluene at 50 °C.

Fabrication and Decryption of a Microarray of Digital Dithiosuccinimide Oligomers

Digital polymer with precisely arranged binary units provides an important option for information storage. This is especially true if the digital polymers are assembled in a device, as it would be of great benefit to data writing and reading in practice. Herein, inspired by DNA microarray technique, the programmable information storing and reading on a mass spectrometry target plate is proposed. First, an array of 4-bit sequence-coded dithiosuccinimide oligomers was efficiently built through sequential thiol-maleimide Michael couplings with good sequence readability by tandem mass spectrometry (MS/MS). Then, toward engineering microarray for information storage, a programmed robotic arm was specifically designed for precisely loading sequence-coded oligomers onto the target plate, and a decoding software was developed for efficient readout of the data from MS/MS sequencing. Notably, short sequence-coded oligomers chains can be used to write long strings of information, and extra error-correction codes are not required as usual due to the inherent concomitant fragmentation signals. Not only text but also bitimages can be automatically stored and decoded with excellent accuracy. This work provides a promising platform of digital polymers for programmable information storing and reading. This article is protected by copyright. All rights reserved.

Direct routes to functional RAFT agents from substituted N-alkyl maleimides

Three different routes are presented for the synthesis of functional RAFT agents from N-substituted maleimides, which are then used to synthesise α,β,ω-functional RAFT polymers.

Design of Abiological Digital Poly(phosphodiester)s

In biological systems, the storage and transfer of genetic information rely on sequence-controlled nucleic acids such as DNA and RNA. It has been realized for quite some time that this property is not only crucial for life but could also be very useful in human applications. For instance, DNA has been actively investigated as a digital storage medium over the past decade. Indeed, the "hard-disk of life" is an obvious choice and a highly optimized material for storing data. Through decades of nucleic acids research, technological tools for parallel synthesis and sequencing of DNA have been readily available. Consequently, it has already been demonstrated that different types of documents (e.g., texts, images, videos, and industrial data) can be stored in chemically synthesized DNA libraries. However, DNA is subject to biological constraints, and its molecular structure cannot be easily varied to match technological needs. In fact, DNA is not the only macromolecule that enables data storage. In recent years, it has been demonstrated that a wide variety of synthetic polymers can also be used for such a purpose. Indeed, modern polymer synthesis allows the preparation of synthetic macromolecules with precisely controlled monomer sequences. Altogether, about a dozens of synthetic digital polymers have already been described, and many more can be foreseen. Among them, sequence-defined poly(phosphodiester)s are one of the most promising options. These polymers are prepared by stepwise phosphoramidite chemistry like chemically synthesized oligonucleotides. However, they are constructed with non-natural building blocks and therefore share almost no structural characteristics with nucleic acids, except phosphate repeat units. Still, they contain readable digital messages that can be deciphered by nanopore sequencing or mass spectrometry sequencing. In this Account, we describe our recent research efforts in synthesizing and sequencing optimal abiological digital poly(phosphodiester)s. A major advantage of these polymers over DNA is that their molecular structure can easily be varied to tune their properties. During the last 5 years, we have engineered the molecular structure of these polymers to adjust crucial parameters such as the storage density, storage capacity, erasability, and readability. Consequently, high-capacity PPDE chains, containing hundreds of bits per chains, can now be synthesized and efficiently sequenced using a routine mass spectrometer. Furthermore, sequencing data can be automatically decrypted with the help of decoding software. This new type of coded matter can also be edited using practical physical triggers such as light and organized in space by programmed self-assembly. All of these recent improvements are summarized and discussed herein.

2,5-Dimethylfuran/Acrylonitrile as Latent Monomer for Sequence-Controlled Copolymer and Sequence-Dependent Thermo-Responsivity

Sequence control has attracted increasing attention for its ability of regulating polymer property and performance. Herein, the sequence-controlled polymer containing acrylonitrile (AN) is achieved by using 2,5-dimethylfuran/acrylonitrile adduct as a latent monomer. The temperature-dependent retro Diels-Alder reaction is engaged in controlling the release of AN during RAFT polymerization, that is, regulating the instant AN concentration via a non-invasive and in situ manner. Such control over the instant AN concentration and particularly the molar ratio of comonomer pair leads to the simultaneous change of monomer units in "living" polymeric chain, thus resulting in the sequence-controlled polymeric structures. By delicately manipulating the polymerization temperature, diverse sequence-on-demand structures of AN-containing copolymers, such as poly(AN/methyl methacrylate), poly(AN/styrene), poly(AN/butyl acrylate), poly(AN/N,N-dimethylacrylamide), and poly(AN/N-isopropylacrylamide) are created. Meanwhile, this study presents an initial attempt in tuning the thermal responsivity of poly(AN/N-isopropylacrylamide), which is closely correlated to the sequence of polymer structure. More importantly, the polymer with averagely distributed AN units results in the higher thermal sensitivity. Therefore, the synthetic strategy proposed in this work offers a promising platform for accessing the sequence-controlled copolymers containing AN structures, thus expanding the investigation on the relationship between the polymer structures and correlated properties.

IrAAC-based construction of dual sequence-defined polytriazoles

One novel dual sequence-defined polytriazole structure was facilely achieved through an IrAAC-based iterative sequential growth strategy.

Self-Assembly of Linear Amphiphilic Pentablock Terpolymer PAAx-PS48-PEO46-PS48-PAAxin Dilute Aqueous Solution

A series of linear amphiphilic pentablock terpolymer PAA_x-b-PS₄₈-b-PEO₄₆-b-PS₄₈-b-PAA_x (A_xS₄₈O₄₆S₄₈A_x) with various lengths x of the PAA block (x = 15, 40, 60, and 90) were synthesized via a two-step atom transfer radical polymerization (ATRP) using Br-poly(ethylene oxide)-Br (Br-PEO₄₆-Br) as the macroinitiator, styrene (St) as the first monomer, and tert-butyl acrylate (tBA) as the second monomer, followed with the hydrolysis of PtBA blocks. The A_xS₄₈O₄₆S₄₈A_x pentablock terpolymers formed micelles in dilute aqueous solution, of which the morphologies were dependent on the length x of the PAA block. Cryogenic transmission electron microscopy (cryo-TEM), dynamic light scattering (DLS), and zeta potential measurement were employed to investigate the morphologies, chain structures, size, and size distribution of the obtained micelles. The morphology of A_xS₄₈O₄₆S₄₈A_x micelles changed from spherical vesicles with ordered porous membranes to long double nanotubes, then to long nanotubes with inner modulated nanotubes or short nanotubes, and finally, to spherical micelles or large compound vesicles with spherical micelles inside when x increased from 15 to 90. The hydrophobic PS blocks formed the walls of vesicles and nanotubes as well as the core of spherical micelles. The hydrophilic PEO and PAA block chains were located on the surfaces of vesicle membranes, nanotubes, and spherical micelles. The PAA block chains were partially ionized, leading to the negative zeta potential of A_xS₄₈O₄₆S₄₈A_x micelles in dilute aqueous solutions.

Construction of sequence-defined polytriazoles by IrAAC and CuAAC reactions

Here we report the first synthesis of sequence-defined polytriazoles, in which different side groups are sequentially anchored to the C-5 position of 1,2,3-triazole rings. By using efficient synthetic strategies based on IrAAC and CuAAC, different monodispersed polytriazoles with up to ∼5.3 kDa and 31-mer were constructed. Structural characterization via NMR, SEC, MALDI-TOF-MS, tandem MS and FTICR-MS evidenced the formation of polytriazoles with the desired specified sequences and exact chain lengths.

Engineering digital polymer based on thiol–maleimide Michael coupling toward effective writing and reading

Based on thiol–maleimide Michael coupling, a digital polymer allowing efficient message writing and reading was rationally designed.

Stereoisomeric furan/maleimide adducts as latent monomers for one-shot sequence-controlled polymerization

Two stereoisomeric latent monomers were used for one-shot sequence-controlled polymerization to create diverse sequence structures.

Binary tree-inspired digital dendrimer

Digital polymers with precisely ordered units acting as the coded 0- or 1-bit, are introduced as a promising option for molecular data storage. However, the pursuit of better performance in terms of high storage capacity and useful functions never stops. Herein, we propose a concept of an information-coded 2D digital dendrimer. The divergent growth via thiol-maleimide Michael coupling allows precise arrangements of the 0- and 1-bits in the uniform dendrimers. A protocol for calculating the storage capacity of non-linear binary digital dendrimer is established based on data matrix barcode, generated by the tandem mass spectrometry decoding and encryption. Furthermore, the generated data matrix barcode can be read by a common hand-held device to cater the applications such as item identification, traceability and anticouterfeiting purpose. This work demonstrates the high data storage capacity of a uniform dendrimer and uncovers good opportunities for the digital polymers.

Digital polymers with precisely ordered units for next-generation data storage media are continually investigated for higher storage capacity. Here the authors show the synthesis of information-coded 2D digital dendrimers and the generated data matrix barcode can be read by a common hand-held device.

Olefin metathesis in multiblock copolymer synthesis

Multiblock copolymers constitute a basis for an emerging class of nanomaterials that combine various functional properties with durability and enhanced mechanical characteristics. Our mini-review addresses synthetic approaches to the design of multiblock copolymers from unsaturated monomers and polymers using olefin metathesis reactions and other ways of chemical modification across double C=C bonds. The main techniques, actively developed during the last decade and discussed here, are the coupling of end-functionalized blocks, sequential ring-opening metathesis polymerization, and cross metathesis between unsaturated polymers, or macromolecular cross metathesis. The last topic attracts special interest due to its relative simplicity and broad opportunities to tailor the structure and hence the properties of the copolymer products. Whenever possible, we analyze the structure-property relations for multiblock copolymers and point to their possible practical applications.

Monodisperse, sequence-defined macromolecules as a tool to evaluate the limits of ring-closing metathesis

Sequence-defined macromolecules of uniform size unlock the door to many new applications in polymer chemistry, such as structure/property or structure/activity relationship investigations, which cannot be conducted accurately, if the investigated macromolecules exhibit dispersity.

Synthesis of a well-defined alternating copolymer of 1,1-diphenylethylene and tert-butyldimethylsilyloxymethyl substituted styrene by anionic copolymerization: toward tailored graft copolymers with controlled side chain densities

Well-defined alternating copolymers comprising 1,1-diphenylethylene (DPE) and styrene derivative having sterically bulky tert-butyldimethylsilyloxymethyl group at the meta position (St-TBS) were successfully synthesized.

Light-Induced RAFT Single Unit Monomer Insertion in Aqueous Solution-Toward Sequence-Controlled Polymers

First report on the sequential, visible light-initiated, single unit monomer insertion (SUMI) of N,N-dimethylacrylamide (DMAm) into the reversible addition fragmentation chain transfer (RAFT) agent, 4-((((2-carboxyethyl)thio)carbonothioyl)thio)-4-cyanopentanoic acid (CTA₁ ), in aqueous solution is provided. The specificity for SUMI over formation of higher oligomers and/or RAFT agent-derived by-products is higher for longer irradiation wavelengths. Red light provides the cleanest product (selective SUMI), showing a linear pseudo-first order kinetic profile to high (>80%) conversion, but also the slowest reaction rate. Blue light provides a relatively rapid reaction, but also gives some by-products (<2%) and the kinetic profile displays a conversion plateau at >65% conversion. Higher specificity with red light is attributed to CTA₁ absorbing at longer wavelengths than the SUMI product, which allows selective excitation of CTA₁ . The use of a higher reaction temperature (65 °C vs ambient) results in a higher reaction rate and a reduction in oligomer formation.

Alternating Ring-Opening Metathesis Polymerization (AROMP) of Hydrophobic and Hydrophilic Monomers Provides Oligomers with Side-Chain Sequence Control

We report the formation of oligomers with side-chain sequence control using ruthenium-catalyzed alternating ring-opening metathesis polymerization (AROMP). These oligomers are prepared through sequential, stoichiometric addition of bicyclo[4.2.0]oct-1(8)-ene-8-carboxamide (monomer A) at 85 °C and cyclohexene (monomer B) at 45 °C to generate sequences up to 24 monomeric units composed of (A-alt- B) n and (A'-alt-B) n microblocks, where n ranges from 1 to 6. Herein, monomer A has an alkyl side chain, and monomer A' has a glycine methyl ester side chain. Increasing microblock size from one to six results in an increasing water contact angle on spin-coated thin films, despite the constant ratio of hydrophilic and hydrophobic moieties. However, a disproportionately high contact angle was observed when n equals 2. Thus, the unique all-carbon backbone formed in the AROMP of bicyclo[4.2.0]oct-1(8)-ene-8-carboxamides and cyclohexene provides a platform for the nontemplated preparation of materials with specific sequences of side chains.

Scalable syntheses of well-defined pentadecablock bipolymer and quintopolymer

The one-pot syntheses of two pentadeca-(15)-block methacrylate-based amphiphilic copolymers, specifically a bipolymer (AB)₇A and a quintopolymer (ABCDE)₃, are being reported using a fast and easy to scale up procedure that does not require any intermediate purification steps.

Periodic polymers based on a self-accelerating click reaction

Self-accelerating click chemistry was used to prepare sequence-controlled periodic polymers with ultrahigh molecular weights or a cyclic molecular topology.

Tuning the spin crossover behavior of the polyanion [(H2O)6Fe3(μ-L)6]6–: the case of the cesium salt

Cation exchange transforms the gradual spin transition of the trimer [(H₂O)₆Fe₃(μ-L)₆]^6– into an abrupt transition with a wide hysteresis above room temperature.

Facile synthesis of advanced gradient polymers with sequence control using furan-protected maleimide as a comonomer

Diverse advanced gradient polymers, including simultaneous, hierarchical, di-blocky, symmetrical, and tri-blocky gradient polymers, were facilely fabricated by applying furan protected maleimide as a co-monomer.

Defining the Field of Sequence-Controlled Polymers

Over the last ten years, the development of synthetic polymers containing controlled monomer sequences has become a prominent topic in fundamental and applied polymer science. This emerging area is particularly broad and combines classical polymer chemistry tools with techniques imported from other domains such as biology, biochemistry, organic synthesis, engineering, and bioanalytics. Consequently, it also generates new structures, terminologies, and applications that are not within the traditional scope of polymer science. The term "sequence-controlled polymers" (SCPs) was recently proposed as a generic name to describe all these recent trends. However, since the field of SCPs has been growing very rapidly in recent literature, it is urgent to accurately define its scientific frontiers. In this important context, this review is an attempt to define, rationalize, and classify the field of SCPs. In particular, all synthetic approaches that have been reported for the synthesis of SCPs are discussed and categorized. In addition, the characterization tools, properties, and potential applications of these new polymers are described herein. Overall, this review serves as a reference guide for understanding the burgeoning field of SCPs.

Controlling the structure of sequence-defined poly(phosphodiester)s for optimal MS/MS reading of digital information

Digital polymers are monodisperse chains with a controlled sequence of co-monomers, defined as letters of an alphabet, and are used to store information at the molecular level. Reading such messages is hence a sequencing task that can be efficiently achieved by tandem mass spectrometry. To improve their readability, structure of sequence-controlled synthetic polymers can be optimized, based on considerations regarding their fragmentation behavior. This strategy is described here for poly(phosphodiester)s, which were synthesized as monodisperse chains with more than 100 units but exhibited extremely complex dissociation spectra. In these polymers, two repeating units that differ by a simple H/CH₃ variation were defined as the 0 and 1 bit of the ASCII code and spaced by a phosphate moiety. They were readily ionized in negative ion mode electrospray but dissociated via cleavage at all phosphate bonds upon collisional activation. Although allowing a complete sequence coverage of digital poly(phosphodiester)s, this fragmentation behavior was not efficient for macromolecules with more than 50 co-monomers, and data interpretation was very tedious. The structure of these polymers was then modified by introducing alkoxyamine linkages at appropriate location throughout the chain. A first design consisted of placing these low dissociation energy bonds between each monomeric bit: while cleavage of this sole bond greatly simplified MS/MS spectra, efficient sequencing was limited to chains with up to about 50 units. In contrast, introduction of alkoxyamine bonds between each byte (i.e. a set of eight co-monomers) was a more successful strategy. Long messages (so far, up to 8 bytes) could be read in MS³ experiments, where single-byte containing fragments released during the first activation stage were further dissociated for sequencing. The whole sequence of such byte-truncated poly(phosphodiester)s could be easily re-constructed based on a mass tagging system which permits to determine the original location of each byte in the chain. Copyright © 2017 John Wiley & Sons, Ltd.

Click and Click-Inspired Chemistry for the Design of Sequence-Controlled Polymers

During the previous decade, many popular chemical reactions used in the area of "click" chemistry and similarly efficient "click-inspired" reactions have been applied for the design of sequence-defined and, more generally, sequence-controlled structures. This combination of topics has already made quite a significant impact on scientific research to date and has enabled the synthesis of highly functionalized and complex oligomeric and polymeric structures, which offer the prospect of many exciting further developments and applications in the near future. This minireview highlights the fruitful combination of these two topics for the preparation of sequence-controlled oligomeric and macromolecular structures and showcases the vast number of publications in this field within a relatively short span of time. It is divided into three sections according to the click-(inspired) reaction that has been applied: copper-catalyzed azide-alkyne cycloaddition, thiol-X, and related thiolactone-based reactions, and finally Diels-Alder-chemistry-based routes are outlined, respectively.