Residues 293 and 294 are ligand contact points of the human angiotensin type 1 receptor

Decarboxylation of Ang-(1-7) to Ala1-Ang-(1-7) leads to significant changes in pharmacodynamics

The heptapeptide angiotensin (Ang)-(1-7) is part of the beneficial arm of the renin-angiotensin system. Ang-(1-7) has cardiovascular protective effects, stimulates regeneration, and opposes the often detrimental effects of AngII. We recently identified the G protein-coupled receptors Mas and MrgD as receptors for the heptapeptide. Ala¹-Ang-(1-7) (Alamandine), a decarboxylated form of Ang-(1-7), has similar vasorelaxant effects, but has been described as only stimulating MrgD. Therefore, this study aimed to characterise the consequences of the lack of the carboxyl group in amino acid 1 on intracellular signalling and to identify the receptor fingerprint for Ala¹-Ang-(1-7). In primary endothelial and mesangial cells, Ala¹-Ang-(1-7) elevated cAMP concentration. Dose response curves generated with Ang-(1-7) and Ala¹-Ang-(1-7) significantly differed from each other, with a much lower EC₅₀ and a bell-shape curve for Ala¹-Ang-(1-7). We provided pharmacological proof that both, Mas and MrgD, are functional receptors for Ala¹-Ang-(1-7). Consequently, in primary mesangial cells with genetic deficiency in both receptors, the heptapeptide failed to increase cAMP concentration. As we previously described for Ang-(1-7), the Ala¹-Ang-(1-7)-mediated cAMP increase in Mas/MrgD-transfected HEK293 cells and primary cells was blocked by the AT2 receptor blocker, PD123319. The very distinct dose-response curves for both heptapeptides could be explained by in silico modelling, electrostatic potential calculations, and an involvement of G_{alpha i} for higher concentrations of Ala¹-Ang-(1-7). Our results identify Ala¹-Ang-(1-7) as a peptide with specific pharmacodynamic properties and builds the basis for the design of more potent and efficient Ang-(1-7) analogues for therapeutic intervention in a rapidly growing number of diseases.

G-Protein-Coupled Receptor MrgD Is a Receptor for Angiotensin-(1-7) Involving Adenylyl Cyclase, cAMP, and Phosphokinase A

Angiotensin (Ang)-(1-7) has cardiovascular protective effects and is the opponent of the often detrimental Ang II within the renin-angiotensin system. Although it is well accepted that the G-protein-coupled receptor Mas is a receptor for the heptapeptide, the lack in knowing initial signaling molecules stimulated by Ang-(1-7) prevented definitive characterization of ligand/receptor pharmacology as well as identification of further hypothesized receptors for the heptapeptide. The study aimed to identify a second messenger stimulated by Ang-(1-7) allowing confirmation as well as discovery of the heptapeptide's receptors. Ang-(1-7) elevates cAMP concentration in primary cells, such as endothelial or mesangial cells. Using cAMP as readout in receptor-transfected human embryonic kidney (HEK293) cells, we provided pharmacological proof that Mas is a functional receptor for Ang-(1-7). Moreover, we identified the G-protein-coupled receptor MrgD as a second receptor for Ang-(1-7). Consequently, the heptapeptide failed to increase cAMP concentration in primary mesangial cells with genetic deficiency in both Mas and MrgD Mice deficient in MrgD showed an impaired hemodynamic response after Ang-(1-7) administration. Furthermore, we excluded the Ang II type 2 receptor as a receptor for the heptapeptide but discovered that the Ang II type 2 blocker PD123319 can also block Mas and MrgD receptors. Our results lead to an expansion and partial revision of the renin-angiotensin system, by identifying a second receptor for Ang-(1-7), by excluding Ang II type 2 as a receptor for the heptapeptide, and by enforcing the revisit of such publications which concluded Ang II type 2 function by only using PD123319.

International Union of Basic and Clinical Pharmacology. XCIX. Angiotensin Receptors: Interpreters of Pathophysiological Angiotensinergic Stimuli [corrected]

The renin angiotensin system (RAS) produced hormone peptides regulate many vital body functions. Dysfunctional signaling by receptors for RAS peptides leads to pathologic states. Nearly half of humanity today would likely benefit from modern drugs targeting these receptors. The receptors for RAS peptides consist of three G-protein-coupled receptors—the angiotensin II type 1 receptor (AT1 receptor), the angiotensin II type 2 receptor (AT2 receptor), the MAS receptor—and a type II trans-membrane zinc protein—the candidate angiotensin IV receptor (AngIV binding site). The prorenin receptor is a relatively new contender for consideration, but is not included here because the role of prorenin receptor as an independent endocrine mediator is presently unclear. The full spectrum of biologic characteristics of these receptors is still evolving, but there is evidence establishing unique roles of each receptor in cardiovascular, hemodynamic, neurologic, renal, and endothelial functions, as well as in cell proliferation, survival, matrix-cell interaction, and inflammation. Therapeutic agents targeted to these receptors are either in active use in clinical intervention of major common diseases or under evaluation for repurposing in many other disorders. Broad-spectrum influence these receptors produce in complex pathophysiological context in our body highlights their role as precise interpreters of distinctive angiotensinergic peptide cues. This review article summarizes findings published in the last 15 years on the structure, pharmacology, signaling, physiology, and disease states related to angiotensin receptors. We also discuss the challenges the pharmacologist presently faces in formally accepting newer members as established angiotensin receptors and emphasize necessary future developments.

Identification of Distinct Conformations of the Angiotensin-II Type 1 Receptor Associated with the Gq/11 Protein Pathway and the β-Arrestin Pathway Using Molecular Dynamics Simulations

Biased signaling represents the ability of G protein-coupled receptors to engage distinct pathways with various efficacies depending on the ligand used or on mutations in the receptor. The angiotensin-II type 1 (AT1) receptor, a prototypical class A G protein-coupled receptor, can activate various effectors upon stimulation with the endogenous ligand angiotensin-II (AngII), including the Gq/11 protein and β-arrestins. It is believed that the activation of those two pathways can be associated with distinct conformations of the AT1 receptor. To verify this hypothesis, microseconds of molecular dynamics simulations were computed to explore the conformational landscape sampled by the WT-AT1 receptor, the N111G-AT1 receptor (constitutively active and biased for the Gq/11 pathway), and the D74N-AT1 receptor (biased for the β-arrestin1 and -2 pathways) in their apo-forms and in complex with AngII. The molecular dynamics simulations of the AngII-WT-AT1, N111G-AT1, and AngII-N111G-AT1 receptors revealed specific structural rearrangements compared with the initial and ground state of the receptor. Simulations of the D74N-AT1 receptor revealed that the mutation stabilizes the receptor in the initial ground state. The presence of AngII further stabilized the ground state of the D74N-AT1 receptor. The biased agonist [Sar(1),Ile(8)]AngII also showed a preference for the ground state of the WT-AT1 receptor compared with AngII. These results suggest that activation of the Gq/11 pathway is associated with a specific conformational transition stabilized by the agonist, whereas the activation of the β-arrestin pathway is linked to the stabilization of the ground state of the receptor.

Structural determinants for binding, activation, and functional selectivity of the angiotensin AT1 receptor

The renin-angiotensin system (RAS) plays an important role in the pathophysiology of cardiovascular disorders. Pharmacologic interventions targeting the RAS cascade have led to the discovery of renin inhibitors, angiotensin-converting enzyme inhibitors, and AT(1) receptor blockers (ARBs) to treat hypertension and some cardiovascular and renal disorders. Mutagenesis and modeling studies have revealed that differential functional outcomes are the results of multiple active states conformed by the AT(1) receptor upon interaction with angiotensin II (Ang II). The binding of agonist is dependent on both extracellular and intramembrane regions of the receptor molecule, and as a consequence occupies more extensive area of the receptor than a non-peptide antagonist. Both agonist and antagonist bind to the same intramembrane regions to interfere with each other's binding to exhibit competitive, surmountable interaction. The nature of interactions with the amino acids in the receptor is different for each of the ARBs given the small differences in the molecular structure between drugs. AT(1) receptors attain different conformation states after binding various Ang II analogues, resulting in variable responses through activation of multiple signaling pathways. These include both classical and non-classical pathways mediated through growth factor receptor transactivations, and provide cross-communication between downstream signaling molecules. The structural requirements for AT(1) receptors to activate extracellular signal-regulated kinases 1 and 2 through G proteins, or G protein-independently through β-arrestin, are different. We review the structural and functional characteristics of Ang II and its analogs and antagonists, and their interaction with amino acid residues in the AT(1) receptor.

Differential mechanisms of activation of the Ang peptide receptors AT1, AT2, and MAS: using in silico techniques to differentiate the three receptors

The renin-angiotensin system is involved in multiple conditions ranging from cardiovascular disorders to cancer. Components of the pathway, including ACE, renin and angiotensin receptors are targets for disease treatment. This study addresses three receptors of the pathway: AT1, AT2, and MAS and how the receptors are similar and differ in activation by angiotensin peptides. Combining biochemical and amino acid variation data with multiple species sequence alignments, structural models, and docking site predictions allows for visualization of how angiotensin peptides may bind and activate the receptors; allowing identification of conserved and variant mechanisms in the receptors. MAS differs from AT1 favoring Ang-(1–7) and not Ang II binding, while AT2 recently has been suggested to preferentially bind Ang III. A new model of Ang peptide binding to AT1 and AT2 is proposed that correlates data from site directed mutagenesis and photolabled experiments that were previously considered conflicting. Ang II binds AT1 and AT2 through a conserved initial binding mode involving amino acids 111 (consensus 325) of AT1 (Asn) interacting with Tyr (4) of Ang II and 199 and 256 (consensus 512 and 621, a Lys and His respectively) interacting with Phe (8) of Ang II. In MAS these sites are not conserved, leading to differential binding and activation by Ang-(1–7). In both AT1 and AT2, the Ang II peptide may internalize through Phe (8) of Ang II propagating through the receptors’ conserved aromatic amino acids to the final photolabled positioning relative to either AT1 (amino acid 294, Asn, consensus 725) or AT2 (138, Leu, consensus 336). Understanding receptor activation provides valuable information for drug design and identification of other receptors that can potentially bind Ang peptides.

Structure of the human angiotensin II type 1 (AT1) receptor bound to angiotensin II from multiple chemoselective photoprobe contacts reveals a unique peptide binding mode

Breakthroughs in G protein-coupled receptor structure determination based on crystallography have been mainly obtained from receptors occupied in their transmembrane domain core by low molecular weight ligands, and we have only recently begun to elucidate how the extracellular surface of G protein-coupled receptors (GPCRs) allows for the binding of larger peptide molecules. In the present study, we used a unique chemoselective photoaffinity labeling strategy, the methionine proximity assay, to directly identify at physiological conditions a total of 38 discrete ligand/receptor contact residues that form the extracellular peptide-binding site of an activated GPCR, the angiotensin II type 1 receptor. This experimental data set was used in homology modeling to guide the positioning of the angiotensin II (AngII) peptide within several GPCR crystal structure templates. We found that the CXC chemokine receptor type 4 accommodated the results better than the other templates evaluated; ligand/receptor contact residues were spatially grouped into defined interaction clusters with AngII. In the resulting receptor structure, a β-hairpin fold in extracellular loop 2 in conjunction with two extracellular disulfide bridges appeared to open and shape the entrance of the ligand-binding site. The bound AngII adopted a somewhat vertical binding mode, allowing concomitant contacts across the extracellular surface and deep within the transmembrane domain core of the receptor. We propose that such a dualistic nature of GPCR interaction could be well suited for diffusible linear peptide ligands and a common feature of other peptidergic class A GPCRs.

Critical hydrogen bond formation for activation of the angiotensin II type 1 receptor

G protein-coupled receptors contain selectively important residues that play central roles in the conformational changes that occur during receptor activation. Asparagine 111 (N111(3.35)) is such a residue within the angiotensin II type 1 (AT(1)) receptor. Substitution of N111(3.35) for glycine leads to a constitutively active receptor, whereas substitution for tryptophan leads to an inactivable receptor. Here, we analyzed the AT(1) receptor and two mutants (N111G and N111W) by molecular dynamics simulations, which revealed a novel molecular switch involving the strictly conserved residue D74(2.50). Indeed, D74(2.50) forms a stable hydrogen bond (H-bond) with the residue in position 111(3.35) in the wild-type and the inactivable receptor. However, in the constitutively active mutant N111G-AT(1) receptor, residue D74 is reoriented to form a new H-bond with another strictly conserved residue, N46(1.50). When expressed in HEK293 cells, the mutant N46G-AT(1) receptor was poorly activable, although it retained a high binding affinity. Interestingly, the mutant N46G/N111G-AT(1) receptor was also inactivable. Molecular dynamics simulations also revealed the presence of a cluster of hydrophobic residues from transmembrane domains 2, 3, and 7 that appears to stabilize the inactive form of the receptor. Whereas this hydrophobic cluster and the H-bond between D74(2.50) and W111(3.35) are more stable in the inactivable N111W-AT(1) receptor, the mutant N111W/F77A-AT(1) receptor, designed to weaken the hydrophobic core, showed significant agonist-induced signaling. These results support the potential for the formation of an H-bond between residues D74(2.50) and N46(1.50) in the activation of the AT(1) receptor.

Photoaffinity labeling of Ras converting enzyme using peptide substrates that incorporate benzoylphenylalanine (Bpa) residues: improved labeling and structural implications

Rce1p catalyzes the proteolytic trimming of C-terminal tripeptides from isoprenylated proteins containing CAAX-box sequences. Because Rce1p processing is a necessary component in the Ras pathway of oncogenic signal transduction, Rce1p holds promise as a potential target for therapeutic intervention. However, its mechanism of proteolysis and active site have yet to be defined. Here, we describe synthetic peptide analogues that mimic the natural lipidated Rce1p substrate and incorporate photolabile groups for photoaffinity-labeling applications. These photoactive peptides are designed to crosslink to residues in or near the Rce1p active site. By incorporating the photoactive group via p-benzoyl-l-phenylalanine (Bpa) residues directly into the peptide substrate sequence, the labeling efficiency was substantially increased relative to a previously-synthesized compound. Incorporation of biotin on the N-terminus of the peptides permitted photolabeled Rce1p to be isolated via streptavidin affinity capture. Our findings further suggest that residues outside the CAAX-box sequence are in contact with Rce1p, which has implications for future inhibitor design.

Exploring interactions between the 49 kDa and ND1 subunits in mitochondrial NADH-ubiquinone oxidoreductase (complex I) by photoaffinity labeling

Quinazolines are strong inhibitors of NADH-ubiquinone oxidoreductase (complex I) from bovine heart mitochondria. Using a photoreactive quinazoline, [(125)I]AzQ, and bovine heart submitochondrial particles (SMPs), we demonstrated previously that [(125)I]AzQ binds at the interface of the 49 kDa and ND1 subunits in complex I; it labeled a site in the N-terminal (Asp41-Arg63) region of the 49 kDa subunit, suggesting that this region contacts the ND1 subunit [Murai, M., et al. (2009) Biochemistry 48, 688-698]. The labeled region of ND1 could not be identified because it is highly hydrophobic, and the SMPs did not yield sufficient amounts of labeled protein. Here, we describe how photoaffinity labeling of isolated complex I by [(125)I]AzQ yielded sufficient material for identification of the labeled region of the ND1 subunit. The inhibition of the isolated enzyme by AzQ is comparable to that of SMPs. Our results reveal that the labeled site in ND1 is between Asp199 and Lys262, mostly likely in the third matrix loop that connects the fifth and sixth transmembrane helices. Thus, our results reveal new information about the interface between the hydrophilic and hydrophobic domains of complex I, a region that is thought to be important for ubiquinone reduction and energy transduction.

The amino-terminus of angiotensin II contacts several ectodomains of the angiotensin II receptor AT1

G protein-coupled receptors (GPCRs) are the largest family of cell surface receptors and major targets for drug development. Herein, we sought to identify the regions of the human angiotensin II (AngII) type 1 (hAT(1)) receptor binding cleft that interact with all positions of the AngII using photoaffinity labeling. We conducted a complete iterative walk-through of the AngII sequence with either p-benzoyl-L-phenylalanine (Bpa) or p-[3-(trifluoromethyl)-3H-diazirin-3-yl]-L-phenylalanine (Tdf) to yield two series of eight photoreactive analogues. Pharmacological properties assessment of these sixteen analogues showed that the CAM receptor has a structure-activity relationship (SAR) more amenable to the amino acid substitutions at positions 1, 2, 3, and 5 of AngII than the WT receptor. Photoaffinity labeling of the CAM receptor with the selected analogues, which exhibit different but complementary photochemical properties, suggested that the AngII amino-terminus resides in a hydrophilic environment and interacts simultaneously with different regions of the hAT(1) receptor, including several ectodomains.

Ligand-specific conformation of extracellular loop-2 in the angiotensin II type 1 receptor

The orientation of the second extracellular loop (ECL2) is divergent in G-protein coupled receptor (GPCR) structures determined. This discovery provoked the question, is the ECL2 conformation differentially regulated in the GPCRs that respond to diffusible ligands? We have determined the conformation of the ECL2 of the angiotensin II type 1 receptor by reporter-cysteine accessibility mapping in different receptor states (i.e. empty, agonist-bound and antagonist-bound). We introduced cysteines at each position of ECL2 of an N-terminal epitope-tagged receptor surrogate lacking all non-essential cysteines and then measured reaction of these with a cysteine-reactive biotin probe. The ability of biotinylated mutant receptors to react with a steptavidin-HRP-conjugated antibody was used as the basis for examining differences in accessibility. Two segments of ECL2 were accessible in the empty receptor, indicating an open conformation of ECL2. These segments were inaccessible in the ligand-bound states of the receptor. Using the accessibility constraint, we performed molecular dynamics simulation to predict ECL2 conformation in different states of the receptor. Analysis suggested that a lid conformation similar to that of ECL2 in rhodopsin was induced upon binding both agonist and antagonist, but exposing different accessible segments delimited by the highly conserved disulfide bond. Our study reveals the ability of ECL2 to interact with diffusing ligands and to adopt a ligand-specific lid conformation, thus, slowing down dissociation of ligands when bound. Distinct conformations induced by the bound agonist and the antagonist around the conserved disulfide bond suggest an important role for this disulfide bond in producing different functional states of the receptor.

The fifth transmembrane domain of angiotensin II Type 1 receptor participates in the formation of the ligand-binding pocket and undergoes a counterclockwise rotation upon receptor activation

The octapeptide hormone angiotensin II exerts a wide variety of cardiovascular effects through the activation of the angiotensin II Type 1 (AT(1)) receptor, which belongs to the G protein-coupled receptor superfamily. Like other G protein- coupled receptors, the AT(1) receptor possesses seven transmembrane domains that provide structural support for the formation of the ligand-binding pocket. The role of the fifth transmembrane domain (TMD5) was investigated using the substituted cysteine accessibility method. All of the residues within Thr-190 to Leu-217 region were mutated one at a time to cysteine, and after expression in COS-7 cells, the mutant receptors were treated with the sulfhydryl-specific alkylating agent methanethiosulfonate-ethylammonium (MTSEA). MTSEA reacts selectively with water-accessible, free sulfhydryl groups of endogenous or introduced point mutation cysteines. If a cysteine is found in the binding pocket, the covalent modification will affect the binding kinetics of the ligand. MTSEA substantially decreased the binding affinity of L197C-AT(1), N200C-AT(1), I201C-AT(1), G203C-AT(1), and F204C-AT(1) mutant receptors, which suggests that these residues orient themselves within the water-accessible binding pocket of the AT(1) receptor. Interestingly, this pattern of acquired MTSEA sensitivity was altered for TMD5 reporter cysteines engineered in a constitutively active N111G-AT(1) receptor background. Indeed, mutant I201C-N111G-AT(1) became more sensitive to MTSEA, whereas mutant G203C-N111G-AT(1) lost some sensitivity. Our results suggest that constitutive activation of AT(1) receptor causes an apparent counterclockwise rotation of TMD5 as viewed from the extracellular side.

Activation induces structural changes in the liganded angiotensin II type 1 receptor

The octapeptide hormone angiotensin II (AngII) binds to and activates the human angiotensin II type 1 receptor (hAT(1)) of the G protein-coupled receptor class A family. Several activation mechanisms have been proposed for this family, but they have not yet been experimentally validated. We previously used the methionine proximity assay to show that 11 residues in transmembrane domain (TMD) III, VI, and VII of the hAT(1) receptor reside in close proximity to the C-terminal residue of AngII. With the exception of a single change in TMD VI, the same contacts are present on N111G-hAT(1), a constitutively active mutant; this N111G-hAT(1) is a model for the active form of the receptor. In this study, two series of 53 individual methionine mutations were constructed in TMD I, II, IV, and V on both receptor forms. The mutants were photolabeled with a neutral antagonist, (125)I-[Sar(1),p-benzoyl-L-Phe(8)]AngII, and the resulting complexes were digested with cyanogen bromide. Although no new contacts were found for the hAT(1) mutants, two were found in the constitutively active mutants, Phe-77 in TMD II and Asn-200 in TMD V. To our knowledge, this is the first time that a direct ligand contact with TMD II and TMD V has been reported. These contact point differences were used to identify the structural changes between the WT-hAT(1) and N111G-hAT(1) complexes through homology-based modeling and restrained molecular dynamics. The model generated revealed an important structural rearrangement of several TMDs from the basal to the activated form in the WT-hAT(1) receptor.

The second transmembrane domain of the human type 1 angiotensin II receptor participates in the formation of the ligand binding pocket and undergoes integral pivoting movement during the process of receptor activation

The octapeptide hormone angiotensin II (AngII) exerts a wide variety of cardiovascular effects through the activation of the angiotensin II type-1 (AT(1)) receptor, which belongs to the G protein-coupled receptor superfamily. Like other G protein-coupled receptors, the AT(1) receptor possesses seven transmembrane domains that provide structural support for the formation of the ligand-binding pocket. In order to identify those residues in the second transmembrane domain (TMD2) that contribute to the formation of the binding pocket of the AT(1) receptor, we used the substituted cysteine accessibility method. All of the residues within the Leu-70 to Trp-94 region were mutated one at a time to a cysteine, and, after expression in COS-7 cells, the mutant receptors were treated with the sulfhydryl-specific alkylating agent methanethiosulfonate-ethylammonium (MTSEA). MTSEA reacts selectively with water-accessible, free sulfhydryl groups of endogenous or introduced point mutation cysteines. If a cysteine is found in the binding pocket, the covalent modification will affect the binding kinetics of the ligand. MTSEA substantially decreased the binding affinity of D74C-AT(1), L81C-AT(1), A85C-AT(1), T88C-AT(1), and A89C-AT(1) mutant receptors, which suggests that these residues orient themselves within the water-accessible binding pocket of the AT(1) receptor. Interestingly, this pattern of acquired MTSEA sensitivity was altered for TMD2 reporter cysteines engineered in a constitutively active N111G-AT(1) receptor background. Indeed, mutant D74C-N111G-AT(1) became insensitive to MTSEA, whereas mutant L81C-N111G-AT(1) lost some sensitivity and mutant V86C-N111G-AT(1) became sensitive to MTSEA. Our results suggest that constitutive activation of the AT(1) receptor causes TMD2 to pivot, bringing the top of TMD2 closer to the binding pocket and pushing the bottom of TMD2 away from the binding pocket.

The Active and the Inactive Form of the hAT1Receptor Have an Identical Ligand-Binding Environment: An MPA Study on a Constitutively Active Angiotensin II Receptor Mutant

Several models of activation mechanisms were proposed for G protein-coupled receptors (GPCRs), yet no direct methods exist for their elucidation. The availability of constitutively active mutants has given an opportunity to study active receptor conformations within acceptable limits using models such as the angiotensin II type 1 (AT1)1 receptor mutant N111G-hAT1 which displays an important constitutive activity. Recently, by using methionine proximity assay, we showed for the hAT1 receptor that TMD III, VI, and VII form the ligand-binding pocket of the C-terminal amino acid of an antagonistic AngII analogue. In the present contribution, we investigated whether the same residues would also constitute the ligand-binding contacts in constitutively activated mutant (CAM) receptors. For this purpose, the same Met mutagenesis strategy was carried out on the N111G double mutants. Analysis of 43 receptors mutants in the N111G-hAT1 series, photolabeled and CNBr digested, showed that there were only subtle structural changes between the wt-receptor and its constitutively active form.

Synthesis of an Agonistic, Difluoro-Azido Photolabel of Angiotensin II and Labeling of the AT1Receptor: Transmembrane Domains 3, 6, and 7 Form the Ligand-Binding Pocket

p-Azido-phenylalanine has been frequently used for photoaffinity labeling of target proteins such as the angiotensin receptors. However, chemical studies showed that simple aryl nitrenes first react intramolecularly, forming a semistable cyclic keteneimine and then reacting with nucleophile residues in the target structure like those of lysine and arginine. We synthesized 3,5-difluoro-4-azidophenylalanine where the formation of the keteneimine is prevented and where photoincorporation should be due to nonselective nitrene insertion only. This new amino acid was introduced in position 8 of angiotensin II and compared with the corresponding azidophenylalanine peptide using human AT1 receptor as target. The new photolabel maintained full agonist activity and a similar yield of photolabeling but without the previously observed gradual hydrolysis. Several selective proteolyses of the labeled receptor indicate that the new photolabel forms three simultaneous contact regions on the hAT1 receptor, suggestive of a nonselective behavior of the photolabel. A major contact was established in the sixth transmembrane domain but also in the third and seventh domain. Our results are in excellent agreement with those recently obtained from methionine proximity assay studies.

Mapping ligand-receptor interfaces: approaching the resolution limit of benzophenone-based photoaffinity scanning

Photoaffinity crosslinking has yielded important insights in the study of G protein-coupled receptors and the mode of ligand binding. The most widely used photolabile moiety is p-benzoylphenylalanine largely because of its reportedly high site specificity, reduced reactivity to water and light, photokinetics, and ease of incorporation into peptide ligands during synthesis. However, in the course of our studies directed at characterizing the binding of parathyroid hormone to its cognate G protein-coupled receptor, we find that inherent properties of p-benzoylphenylalanine, such as its size and conformational flexibility, limit the resulting resolution of the ligand-receptor structure. Here, we examine and define these limits.

Photoaffinity labeling and its application in structural biology

This review contains a brief consideration of some theoretical aspects of photoaffinity (photoreactive) labeling (PAL), and the most widely used photoreactive groups, such as arylazide, benzophenone, and 3-(trifluoromethyl)-3-phenyldiazirine, are characterized in comparison. Experimental methodology is described, including modern approaches of mass spectrometry for analysis of cross-linking products between the photoreactive probes and biomolecules. Examples of PAL application in diverse fields of structural biology during the last five-ten years are presented. Potential drug targets, transport processes, stereochemistry of interaction of G-protein-coupled receptors with ligands, as well as structural changes in nicotinic acetylcholine receptor are considered. Applications of photoaffinity ganglioside and phospholipid probes for studying biological membranes and of nucleotide probes in investigations of replicative and transcriptional complexes, as well as photoaffinity glycoconjugates for detecting carbohydrate-binding proteins are covered. In combination with modern techniques of instrumental analysis and computer-aided modeling, PAL remains the most important approach in studies on the organization of biological systems.

Photolabelling the urotensin II receptor reveals distinct agonist- and partial-agonist-binding sites

The mechanism by which GPCRs (G-protein-coupled receptors) undergo activation is believed to involve conformational changes following agonist binding. We have used photoaffinity labelling to identify domains within GPCRs that make contact with various photoreactive ligands in order to better understand the activation mechanism. Here, a series of four agonist {[Bpa1]U-II (Bpa is p-benzoyl-L-phenylalanine), [Bpa2]U-II, [Bpa3]U-II and [Bpa4]U-II} and three partial agonist {[Bpa1Pen5D-Trp7Orn8]U-II (Pen is penicillamine), [Bpa2Pen5D-Trp7Orn8]U-II and [Pen5Bpa6D-Trp7Orn8]U-II} photoreactive urotensin II (U-II) analogues were used to identify ligand-binding sites on the UT receptor (U-II receptor). All peptides bound the UT receptor expressed in COS-7 cells with high affinity (Kd of 0.3-17.7 nM). Proteolytic mapping and mutational analysis led to the identification of Met288 of the third extracellular loop of the UT receptor as a binding site for all four agonist peptides. Both partial agonists containing the photoreactive group in positions 1 and 2 also cross-linked to Met288. We found that photolabelling with the partial agonist containing the photoreactive group in position 6 led to the detection of transmembrane domain 5 as a binding site for that ligand. Interestingly, this differs from Met184/Met185 of the fourth transmembrane domain that had been identified previously as a contact site for the full agonist [Bpa6]U-II. These results enable us to better map the binding pocket of the UT receptor. Moreover, the data also suggest that, although structurally related agonists or partial agonists may dock in the same general binding pocket, conformational changes induced by various states of activation may result in slight differences in spatial proximity within the cyclic portion of U-II analogues.

Participation of transmembrane proline 82 in angiotensin II AT1 receptor signal transduction

Most of the classical physiological effects of the octapeptide angiotensin II (AngII) are produced by activating the AT1 receptor which belongs to the G-protein coupled receptor family (GPCR). Peptidic GPCRs may be functionally divided in three regions: (i) extracellular domains involved in ligand binding; (ii) intracellular domains implicated in agonist-induced coupling to G protein and (iii) seven transmembrane domains (TM) involved in signal transduction. The TM regions of such receptors have peculiar characteristics such as the presence of proline residues. In this project we aimed to investigate the participation of two highly conserved proline residues (Pro82 and Pro162), located in TM II and TM IV, respectively, in AT1 receptor signal transduction. Both mutations did not cause major alterations in AngII affinity. Functional assays indicated that the P162A mutant did not influence the signal transduction. On the other hand, a potent deleterious effect of P82A mutation on signal transduction was observed. We believe that the Pro82 residue is crucial to signal transduction, although it is not possible to say yet if this is due to a direct participation or if due to a structural rearrangement of TM II. In this last hypothesis, the removal of proline residue might be correlated to a removal of a kink, which in turn can be involved in the correct positioning of residues involved in signal transduction.

Temperature-dependent variations of ligand-receptor contact points in hAT1

Photoaffinity labelling is regularly used to investigate proteins, including peptidergic G protein-coupled receptors (GPCR). To this purpose benzophenone photolabels have been widely used to identify many contact residues in ligand-binding pockets. The three-dimensional binding environment of the human angiotensin II type 1 receptor hAT(1) has been determined using an iterative methionine mutagenesis strategy based on the photochemical properties and preferential incorporation of benzophenone onto methionine. This has led to the construction of a ligand-bound receptor structure. The present study investigated the effect of temperature on the accessibility of some of these contact points. The hAT(1) receptor and two representative Met mutants (H256M-hAT(1) and F293M-hAT(1)) from the iterative mutagenesis study were photolabelled with the benzophenone-ligand (125)I-[Sar(1), Bpa(8)]AngII at temperatures ranging from - 15 degrees C to 37 degrees C. Labelled receptors were partially purified and digested with cyanogen bromide to identify the contact points or segments. There were no changes in receptor contacts or labelling in the 7th transmembrane domains (TMD) of hAT(1) and F293M-hAT(1) across the temperature range. However, a temperature-dependent change in the ligand-receptor contact of H256M-hAT(1) was observed. At - 15 degrees C, H256M labelling was identical to that of hAT(1), indicating that the interaction was specific to the 7th TMD. Significant labelling changes were observed at higher temperatures and at 37 degrees C labelling occurred almost exclusively at mutated residue H256M-hAT(1) in the 6th TMD. Simultaneous competitive labelling of different areas of this target protein indicated that the ligand-receptor structure became increasingly fluctual at physiological temperatures, while a more compact, low mobility, and low energy conformation prevailed at low temperatures.

S-nitrosylation of cysteine 289 of the AT1 receptor decreases its binding affinity for angiotensin II

1. Nitric oxide (NO) is known to affect the properties of various proteins via the S-nitrosylation of cysteine residues. This study evaluated the direct effects of the NO donor sodium nitroprusside (SNP) on the pharmacological properties of the AT1 receptor for angiotensin II expressed in HEK-293 cells. 2. SNP dose-dependently decreased the binding affinity of the AT1 receptor without affecting its total binding capacity. This modulatory effect was reversed within 5 min of removing SNP. 3. The effect of SNP was not modified in the presence of the G protein uncoupling agent GTPgammaS or the soluble guanylyl cyclase inhibitor 1H-[1,2,4]oxadiazolo[4,3-a]quinoxalin-1-one. 4. The binding properties of a mutant AT1 receptor in which all five cysteine residues within the transmembrane domains had been replaced by serine was not affected by SNP. Systematic analysis of mutant AT1 receptors revealed that cysteine 289 conferred the sensitivity to SNP. 5. These results suggest that NO decreased the binding affinity of the AT1 receptor by S-nitrosylation of cysteine 289. This modulatory mechanism may be particularly relevant in pathophysiological situations where the beneficial effects of NO oppose the deleterious effects of angiotensin II.

Interactions between Conserved Residues in Transmembrane Helices 2 and 7 during Angiotensin AT1Receptor Activation

Site-directed mutagenesis studies and independent molecular modeling studies were combined to investigate the network of inter-residue interactions within the transmembrane region of the angiotensin AT(1a) receptor. Site-directed mutagenesis was focused on residues Tyr292, Asn294, Asn295, and Asn298 in transmembrane helix 7, and the conserved Asp74 in helix 2 and other polar residues. Functional interactions between pairs of residues were evaluated by determining the effects of single and double-reciprocal mutations on agonist-induced AT(1a) receptor activation. Replacement of Tyr292 by aspartate in helix 7 abolished radioligand binding to both Y292D and D74Y/Y292D mutant receptors. Reciprocal mutations of Asp74/Asn294, Ser115/Asn294, Ser252/Asn294, and Asn298/Sen115 caused additive impairment of function, suggesting that these pairs of residues make independent contributions to AT(1a) receptor activation. In contrast, mutations of the Asp74/Tyr298 pair revealed that the D74N/N298D reciprocal mutation substantially increased the impaired inositol phosphate responses of the D74N and N298D receptors. Extensive molecular modeling yielded 3D models of the TM region of the AT(1) receptor and the mutants as well as of their complexes with angiotensin II, which were used to rationalize the possible reasons of impairing of function of some mutants. These data indicate that Asp74 and Asn298 are not optimally positioned for direct strong interaction in the resting conformation of the AT(1a) receptor. Balance of interactions between residues in helix 2 (as D74) and helix 7 (as N294, N295 and N298) in the AT(1) receptors, however, has a crucial role both in determining their functional activity and levels of their expression.

Identification of Structural Determinants for G Protein-Independent Activation of Mitogen-Activated Protein Kinases in the Seventh Transmembrane Domain of the Angiotensin II Type 1 Receptor

Although the intrareceptor mechanisms whereby the angiotensin II (AngII) type 1 receptor activates phospholipase C (PLC) have been extensively investigated, analogous studies of signaling through mitogen-activated protein kinases (MAPK) have been lacking. We investigated MAPK activation and traditional G(q)/PLC signaling in transfected cells using AngII and the signaling selective agonist [Sar(1),Ile(4),Ile(8)] AngII (SII). SII stimulated MAPK without inositol trisphosphate (IP(3)) production and thereby stabilizes an activated receptor state linked to G protein-independent MAPK signaling. Using receptor mutagenesis, we focused on the seventh transmembrane domain and identified three key residues-Tyr(292), Phe(293), and Thr(287). At least three distinct activated states were revealed: 1) an AngII-stabilized state linked to G(q)/PLC signaling, 2) an AngII-stabilized state connected to G protein-independent MAPK activation, and 3) a SII-stabilized state associated with G protein-independent MAPK signaling. The mutant Y292F failed to exhibit AngII-induced IP(3) turnover yet remained capable of AngII-induced MAPK activation. SII failed to stimulate MAPK in Y292F-transfected cells. Thus, Tyr(292) is a key epitope for activated states 1 and 3 but not required for activated state 2. Although the F293L mutant retained normal AngII responses, it also showed an IP(3) response to SII, indicating that Phe(293) may be involved in constraining the receptor to its inactive state. Mutations of Thr(287) abolished all SII-induced signaling without affecting any AngII responses. Thr(287) therefore represents a key residue for a SII-stabilized activated state. Taken together, the data identified a novel structural requirement (Thr(287)) for the SII-stabilized activated state and redefined the mechanistic roles for Tyr(292) and Phe(293).

Methionine acts as a “magnet” in photoaffinity crosslinking experiments

Photoaffinity crosslinking has been utilized to probe the nature of the ligand-receptor interface for a number of G protein-coupled receptor systems. Often the photoreactive benzophenone moiety incorporated in the ligand is found to react with a methionine in the receptor. We introduced methionines one-at-a-time into the region 163-176 of the parathyroid hormone receptor, and find that crosslinking occurs to the side-chain of methionine over a range of 11 amino acids. We call this the "Magnet Effect" of methionine. Hence, crosslinking contact points can be significantly shifted by the presence of methionine in a receptor domain.

Model of the whole rat AT1 receptor and the ligand-binding site

We present a three-dimensional model of the rat type 1 receptor (AT1) for the hormone angiotensin II (Ang II). Ang II and the AT1 receptor play a critical role in the cell-signaling process responsible for the actions of renin-angiotensin system in the regulation of blood pressure, water-electrolyte homeostasis and cell growth. Development of improved therapeutics would be significantly enhanced with the availability of a 3D-structure model for the AT1 receptor and of the binding site for agonists and antagonists. This model was constructed using a combination of computation and homology-modeling techniques starting with the experimentally determined three-dimensional structure of bovine rhodopsin (PDB#1F88) as a template. All 359 residues and two disulfide bonds in the rat AT1 receptor have been accounted for in this model. Ramachandran-map analysis and a 1 nanosecond molecular dynamics simulation of the solvated receptor with and without the bound ligand, Ang II, lend credence to the validity of the model. Docking calculations were performed with the agonist, Ang II and the antihypertensive antagonist, losartan. [Figure: see text].

Determining the Environment of the Ligand Binding Pocket of the Human Angiotensin II Type I (hAT1) Receptor Using the Methionine Proximity Assay

The peptide hormone angiotensin II (AngII) binds to the AT0 (angiotensin type 1) receptor within the transmembrane domains in an extended conformation, and its C-terminal residue interacts with transmembrane domain VII at Phe-293/Asn-294. The molecular environment of this binding pocket remains to be elucidated. The preferential binding of benzophenone photolabels to methionine residues in the target structure has enabled us to design an experimental approach called the methionine proximity assay, which is based on systematic mutagenesis and photolabeling to determine the molecular environment of this binding pocket. A series of 44 transmembrane domain III, VI, and VII X --> Met mutants photolabeled either with 125I-[Sar1,p'-benzoyl-L-Phe8]AngII or with 125I-[Sar1,p''-methoxy-p'-benzoyl-L-Phe8]AngII were purified and digested with cyanogen bromide. Several mutants produced digestion patterns different from that observed with wild type human AT1, indicating that they had a new receptor contact with position 8 of AngII. The following residues form this binding pocket: L112M and Y113M in transmembrane domain (TMD) III; F249M, W253M, H256M, and T260M in TMD VI; and F293M, N294M, N295M, C296M, and L297M in TMD VII. Homology modeling and incorporation of these contacts allowed us to develop an evidence-based molecular model of interactions with human AT1 that is very similar to the rhodopsin-retinal interaction.

Insights into interactions between the alpha-helical region of the salmon calcitonin antagonists and the human calcitonin receptor using photoaffinity labeling

Fish-like calcitonins (CTs), such as salmon CT (sCT), are widely used clinically in the treatment of bone-related disorders; however, the molecular basis for CT binding to its receptor, a class II G protein-coupled receptor, is not well defined. In this study we have used photoaffinity labeling to identify proximity sites between CT and its receptor. Two analogues of the antagonist sCT(8-32) containing a single photolabile p-benzoyl-l-phenylalanine (Bpa) residue in position 8 or 19 were used. Both analogues retained high affinity for the CT receptor and potently inhibited agonist-induced cAMP production. The [Bpa(19)]sCT(8-32) analogue cross-linked to the receptor at or near the equivalent cross-linking site of the full-length peptide, within the fragment Cys(134)-Lys(141) (within the amino terminus of the receptor, adjacent to transmembrane 1) (Pham, V., Wade, J. D., Purdue, B. W., and Sexton, P. M. (2004) J. Biol. Chem. 279, 6720-6729). In contrast, proteolytic mapping and mutational analysis identified Met(49) as the cross-linking site for [Bpa(8)]sCT(8-32). This site differed from the previously identified cross-linking site of the agonist [Bpa(8)]human CT (Dong, M., Pinon, D. I., Cox, R. F., and Miller, L. J. (2004) J. Biol. Chem. 279, 31177-31182) and may provide evidence for conformational differences between interaction with active and inactive state receptors. Molecular modeling suggests that the difference in cross-linking between the two Bpa(8) analogues can be accounted for by a relatively small change in peptide orientation. The model was also consistent with cooperative interaction between the receptor amino terminus and the receptor core.

Analysis of the third transmembrane domain of the human type 1 angiotensin II receptor by cysteine scanning mutagenesis

Activation of G protein-coupled receptors by agonists involves significant movement of transmembrane domains (TMD) following agonist binding. The underlying structural mechanism by which receptor activation takes place is largely unknown but can be inferred by detecting variability within the environment of the ligand-binding pocket, which is a water-accessible crevice surrounded by the seven TMD helices. Using the substituted-cysteine accessibility method, we identified the residues within the third TMD of the wild-type angiotensin II (AT1) receptor that contribute to the formation of the binding site pocket. Each residue within the Ile103-Tyr127 region was mutated one at a time to a cysteine. Treating the A104C, N111C, and L112C mutant receptors with the charged sulfhydryl-specific alkylating agent methanethiosulfonate-ethylammonium (MTSEA) strongly inhibited ligand binding, which suggests that these residues orient themselves within the water-accessible binding pocket of the AT1 receptor. Interestingly, this pattern of acquired MTSEA sensitivity was altered for TMD3 reporter cysteines engineered in a constitutively active AT1 receptor. Indeed, two additional mutants (S109C and V116C) were found to be sensitive to MTSEA treatment. Our results suggest that constitutive activation of the AT1 receptor causes a minor counterclockwise rotation of TMD3, thereby exposing residues, which are not present in the inactive state, to the binding pocket. This pattern of accessibility of residues in the TMD3 of the AT1 receptor parallels that of homologous residues in rhodopsin. This study identified key elements of TMD3 that contribute to the activation of class A G protein-coupled receptors through structural rearrangements.

The alpha-factor mating pheromone of Saccharomyces cerevisiae: a model for studying the interaction of peptide hormones and G protein-coupled receptors

Mating in Saccharomyces cerevisiae is initiated by the secretion of diffusible peptide pheromones that are recognized by G protein-coupled receptors (GPCR). This review summarizes the use of the alpha-factor (WHWLQLKPGQPMY)--GPCR (Ste2p) interaction as a paradigm to understand the recognition between medium-sized peptide hormones and their cognate receptors. Studies over the past 15 years have indicated that the alpha-factor is bent around the center of the pheromone and that residues near the amine terminus play a central role in triggering signal transduction. The bend in the center appears not to be rigid and this flexibility is likely necessary for conformational changes that occur as the receptor switches from the inactive to active state. The results of synthetic, biological, biochemical, molecular biological, and biophysical analyses have led to a preliminary model for the structure of the peptide bound to its receptor. Antagonists for Ste2p have changes near the N-terminus of alpha-factor, and mutated forms of Ste2p were discovered that appear to favor binding of these antagonists relative to agonists. Many features of this yeast recognition system are relevant to and have counterparts in mammalian cells.

Loss-of-function polymorphic variants of the human angiotensin II type 1 receptor

The angiotensin II type 1 (AT1) receptor is the primary effector for angiotensin II (Ang II), a key peptide regulator of blood pressure and fluid homeostasis. AT1 receptors are involved in the pathogenesis of several cardiovascular diseases, including hypertension, cardiac hypertrophy, and congestive heart failure, which are characterized by significant interindividual variation in disease risk, progression, and response to pharmacotherapy. Such variation could arise from genomic polymorphisms in the AT1 receptor. To pursue this notion, we have pharmacologically characterized seven known and putative nonsynonymous AT1 receptor variants. Functional analysis using the cell-based assay receptor selection and amplification technology (R-SAT) revealed that three variants (AT1-G45R, AT1-F204S, and AT1-C289W) displayed altered responses to Ang II and other AT1 receptor agonists and antagonists. Agonist responses to Ang II were absent for AT1-G45R and significantly reduced in potency for AT1-C289W (11-fold) and AT1-F204S (57-fold) compared with the wild-type (WT) receptor. AT1-F204S also displayed reduced relative efficacy (57%). Quantitatively similar results were obtained in two additional functional assays, phosphatidyl inositol hydrolysis and extracellular signal-regulated kinase activation. Radioligand binding studies revealed that AT1-G45R failed to bind Ang II, whereas cell surface staining clearly showed that it trafficked to the cell surface. AT1-C289W and AT1-F204S displayed reduced binding affinities of 3- and 5-fold and reduced cell surface expression of 43 and 60% of that observed for the WT receptor, respectively. These data demonstrate that polymorphic variation in the human AT1 receptor induces loss of functional phenotypes, which may constitute the molecular basis of variability of AT1 receptor-mediated physiological responses.

Angiotensin II inhibitory peptide found in the receptor sequence using peptide array

Peptide array consisting of hundreds of peptides spatially addressed and synthesized on a cellulose membrane support was used to screen ligand-inhibitory peptides. As a model, angiotensin II (Ang II), a significant peptide related to the treatment of cardiovascular diseases, was chosen as the target ligand. Peptide arrays covering the Ang II receptor type 1 sequence were prepared, and peptide domains with high affinity to the Ang II fluorescein conjugate were investigated. The peptide (VVIVIY) within the first transmembrane region exhibited the highest affinity to Ang II. The synthesized soluble VVIVIY peptide had an 84% inhibitory effect on Ang II-induced aorta contraction. These results indicate that our screening strategy utilizing peptide array is an effective approach for the peptide drug development.

The constitutively active N111G-AT1 receptor for angiotensin II maintains a high affinity conformation despite being uncoupled from its cognate G protein Gq/11alpha

Asn111, localized in the third transmembrane domain of the AT1 receptor for angiotensin II, plays a critical role in stabilizing the inactive conformation of the receptor. We evaluated the functional and G protein-coupling properties of mutant AT1 receptors in which Asn111 was substituted with smaller (Ala or Gly) or larger residues (Gln or Trp). All four mutants were expressed at high levels in COS-7 cells and, except for N111W-AT1, recognized 125I-Ang II with high affinities comparable to that of the wild-type AT1 receptor. In phospholipase C assays, the four mutants encompassed the entire spectrum of functional states, ranging from constitutive activity (without agonist) for N111A-AT1 and N111G-AT1 to a significant loss of activity (upon maximal stimulation) for N111Q-AT1 and a major loss of activity for N111W-AT1. In Ca2+ mobilization studies, N111W-AT1 produced a weak Ca2+ transient and, unexpectedly, N111G-AT1 also produced a Ca2+ transient that was much weaker than that of the wild-type AT1. The agonist binding affinity of N111W-AT1 was not modified in the presence of GTPgamma S, suggesting that this receptor is not basally coupled to a G protein. GTPgamma S did not modify the high agonist-binding affinity of N111G-AT1 but abolished the coimmunoprecipitation of Gq/11alpha with this constitutively active mutant receptor. These results are a direct demonstration that the N111G-AT1 receptor maintains a high affinity conformation despite being uncoupled from the G protein Gq/11.

Constitutive activation of the angiotensin II type 1 receptor alters the spatial proximity of transmembrane 7 to the ligand-binding pocket

Activation of G protein-coupled receptors by agonists involves significant movement of transmembrane domains (TM) following binding of agonist. The underlying structural mechanism by which receptor activation takes place is largely unknown but can be inferred by detecting variability within the environment of the ligand-binding pocket, which constitutes a water-accessible crevice surrounded by the seven TM helices. Using the substituted cysteine accessibility method, we initially identified those residues within the seventh transmembrane domain (TM7) of wild type angiotensin II type 1 (AT1) receptor that contribute to forming the binding site pocket. We have substituted successively TM7 residues ranging from Ile276 to Tyr302 to cysteine. Treatment of A277C, V280C, T282C, A283C, I286C, A291C, and F301C mutant receptors with the charged sulfhydryl-specific alkylating agent MTSEA significantly inhibited ligand binding, which suggests that these residues orient themselves within the water-accessible binding pocket of the AT1 receptor. Interestingly, this pattern of acquired MTSEA sensitivity was greatly reduced for TM7 reporter cysteines engineered in a constitutively active mutant of the AT1 receptor. Our data suggest that upon activation, TM7 of the AT1 receptor goes through a pattern of helical movements that results in its distancing from the binding pocket per se. These studies support accumulating evidence whereby elements of TM7 of class A GPCRs promote activation of the receptor through structural rearrangements.

Met174 side chain is the site of photoinsertion of a substance P competitive peptide antagonist photoreactive in position 8

Numerous photoaffinity studies of the NK-1 receptor have been carried out with peptide agonist analogues of substance P (SP). However, no information is available with regard to the domain interaction of peptide antagonists within this receptor. We describe herein the photoaffinity labelling of the SP receptor with a peptide antagonist analogue, Bapa(0)[(pBzl)Phe(8),DPro(9),MePhe(10),Trp(CHO)(11)]SP. Photolabelling, enzymatic or chemical cleavage of the covalent complex, purification via streptavidin-coated beads and matrix-assisted laser desorption/ionization time of flight mass spectrometry analysis led us to show that the methyl of Met174 side chain, within the receptor's second extracellular loop, is covalently linked to the antagonist photoreactive at position 8.

TM2-TM7 interaction in coupling movement of transmembrane helices to activation of the angiotensin II type-1 receptor

Agonist-induced rigid body motion of transmembrane (TM) helices has been established as a unifying mechanism in the activation of the G protein-coupled receptors. In attempts to measure specific conformational transitions during the activation of the type 1 receptor for angiotensin II (AT(1)), we found a decrease in accessibility of Cys(76) in the second TM helix, suggesting that the orientation of TM2 is altered (Miura, S., and Karnik, S. S. (2002) J. Biol. Chem. 277, 24299-24305). Now we provide evidence that the TM2 helical movement plays a role in regulating the activated state of the AT(1) receptor, and this role may involve an interaction between TM2 and TM7. Alanine substitution of native Cys(296) in TM7 leads to increased accessibility of Cys(289) and diminished response to bound agonist. Both effects of the C296A mutation are suppressed when combined with F77A and N111G mutants. The TM7 conformation and the sensitivity of Cys(289) altered by C296A mutation are suppressed by the F77A mutation in TM2 to salvage function. We show that the F77A mutant alters orientation of both TM2 and TM7 but does not induce constitutive activity in suppressing the C296A mutant effects. Thus, interaction of TM2 and TM7 is important for transmembrane signal transduction in the AT(1) receptor.