Hemocompatibility of Hydrophilic Antimicrobial Copolymers of Alkylated 4-Vinylpyridine

Structurally Heterogeneous Amphiphilic Conetworks of Poly(vinyl imidazole) Derivatives with Potent Antimicrobial Properties and Cytocompatibility

We report the construction of amphiphilic conetwork (APCN)-based surfaces with potent antimicrobial activity and biofilm inhibition ability. The construction strategy is based on the separation of lipophilic alkyl groups (>C6) from the cationic network to obtain good antibacterial properties. The reaction of partially alkylated poly(vinyl imidazole) with the activated halide compounds followed by coating a glass or poly(dimethylsiloxane) (PDMS) sheet leads to the formation of the APCN surface. The dangling alkyl chains, crosslinking junctions, and unreacted vinyl imidazole groups are heterogeneously distributed in the APCNs. The swelling, mechanical property, and phase morphology of the APCN films have been evaluated. Bacterial cell disrupting potency of the APCN coatings increases with increasing alkyl chain length from C6 to C18 with somewhat more of an effect on Escherichia coli as compared to Bacillus subtilis bacteria. The minimum inhibitory amount of the APCNs on glass and a hydrophobic PDMS surface is in the range of 0.02-0.04 mg/cm2 depending on the chain length of the alkyl and the degree of quaternization. The effect of the type of crosslinker for the construction of the conetwork on the antimicrobial property has been evaluated to elucidate the exclusive design of the APCNs. The APCN-based coatings provide potent biocidal activity without much negatively affecting the hemocompatibility and cytocompatibility. These APCNs provide a good model system for comparative evaluation of the biocidal property and structural effect on the biocidal activity.

A DR/NIR Hybrid Polymeric Tool for Functional Bio-Coatings: Theoretical Study, Cytotoxicity, and Antimicrobial Activity

Among modern biomaterials, hybrid tools containing an organic component and a metal cation are recognized as added value, and, for many advanced biomedical applications, synthetic polymers are used as thin protective/functional coatings for medical or prosthetic devices and implants. These materials require specific non-degradability, biocompatibility, antimicrobial, and antiproliferative properties to address safety aspects concerning their use in medicine. Moreover, bioimaging monitoring of the biomedical device and/or implant through biological tissues is a desirable ability. This article reports a novel hybrid metallopolymer obtained by grafting zinc-coordinated fragments to an organic polymeric matrix. This hybrid polymer, owing to its relevant emission in the deep red to near-infrared (DR/NIR) region, is monitorable; therefore, it represents a potential material for biomedical coating. Furthermore, it shows good biocompatibility and adhesion properties and excellent stability in slightly acidic/basic water solutions. Finally, in contact with the superficial layers of human skin, it shows antimicrobial properties against Staphylococcus aureus bacterial strains.

Effect of Cationic Groups on the Selectivity of Ternary Antimicrobial Polymers

Antimicrobial polymers (AMPs) have emerged as a promising approach to combat multidrug-resistant pathogens. Developed from binary polymers, which contain cationic and hydrophobic groups, ternary polymers are enhanced by adding neutral hydrophilic monomers to improve their biocompatibility. Cationic groups have attracted significant attention owing to their pivotal role in AMPs. Although many studies have investigated the effect of cationic groups on antimicrobial activity of binary AMPs, there is a lack of comprehensive and systematic evaluation for ternary AMPs. Therefore, a library of 31 statistical amphiphilic ternary polymers containing different cationic groups, including primary amine, guanidine and sulfonium groups was prepared to investigate the impact of cationic groups on antimicrobial activity and biocompatibility. We show that the cationic balance appears to be a critical factor influencing polymers' antibacterial activity and selectivity. Our results reveal that the polymers that have the ratio of the cationic groups ranging between 50-60%, coupled with a cationic/hydrophobic ratio in the range of [1.4-2] and an appropriate neutral hydrophilic/hydrophobic balance, exhibited the highest selectivity toward mammalian cells. Furthermore, selectivity can be improved with suitable cationic moieties and good neutral hydrophilic candidates. In the present study, a lysine-mimicking monomer and PEG chain were the best choices for cationic and hydrophilic sources to develop the most selective AMPs, displaying an impressive selectivity for HC₅₀ and IC₅₀ greater than 83 and 21, respectively. This study elucidates a structure-property-performance relationship for ternary AMPs, which contributes to the development of AMPs capable of selectively targeting gram-negative pathogens. This article is protected by copyright. All rights reserved.

Virucidal N95 Respirator Face Masks via Ultrathin Surface-Grafted Quaternary Ammonium Polymer Coatings

N95 respirator face masks serve as effective physical barriers against airborne virus transmission, especially in a hospital setting. However, conventional filtration materials, such as nonwoven polypropylene fibers, have no inherent virucidal activity, and thus, the risk of surface contamination increases with wear time. The ability of face masks to protect against infection can be likely improved by incorporating components that deactivate viruses on contact. We present a facile method for covalently attaching antiviral quaternary ammonium polymers to the fiber surfaces of nonwoven polypropylene fabrics that are commonly used as filtration materials in N95 respirators via ultraviolet (UV)-initiated grafting of biocidal agents. Here, C₁₂-quaternized benzophenone is simultaneously polymerized and grafted onto melt-blown or spunbond polypropylene fabric using 254 nm UV light. This grafting method generated ultrathin polymer coatings which imparted a permanent cationic charge without grossly changing fiber morphology or air resistance across the filter. For melt-blown polypropylene, which comprises the active filtration layer of N95 respirator masks, filtration efficiency was negatively impacted from 72.5 to 51.3% for uncoated and coated single-ply samples, respectively. Similarly, directly applying the antiviral polymer to full N95 masks decreased the filtration efficiency from 90.4 to 79.8%. This effect was due to the exposure of melt-blown polypropylene to organic solvents used in the coating process. However, N95-level filtration efficiency could be achieved by wearing coated spunbond polypropylene over an N95 mask or by fabricating N95 masks with coated spunbond as the exterior layer. Coated materials demonstrated broad-spectrum antimicrobial activity against several lipid-enveloped viruses, as well as Staphylococcus aureus and Escherichia coli bacteria. For example, a 4.3-log reduction in infectious MHV-A59 virus and a 3.3-log reduction in infectious SuHV-1 virus after contact with coated filters were observed, although the level of viral deactivation varied significantly depending on the virus strain and protocol for assaying infectivity.

Host Defense Peptide-Mimicking Polymers and Polymeric-Brush-Tethered Host Defense Peptides: Recent Developments, Limitations, and Potential Success

Amphiphilic antimicrobial polymers have attracted considerable interest as structural mimics of host defense peptides (HDPs) that provide a broad spectrum of activity and do not induce bacterial-drug resistance. Likewise, surface engineered polymeric-brush-tethered HDP is considered a promising coating strategy that prevents infections and endows implantable materials and medical devices with antifouling and antibacterial properties. While each strategy takes a different approach, both aim to circumvent limitations of HDPs, enhance physicochemical properties, therapeutic performance, and enable solutions to unmet therapeutic needs. In this review, we discuss the recent advances in each approach, spotlight the fundamental principles, describe current developments with examples, discuss benefits and limitations, and highlight potential success. The review intends to summarize our knowledge in this research area and stimulate further work on antimicrobial polymers and functionalized polymeric biomaterials as strategies to fight infectious diseases.

Biomaterials for human space exploration: A review of their untapped potential

As biomaterial advances make headway into lightweight radiation protection, wound healing dressings, and microbe resistant surfaces, a relevance to human space exploration manifests itself. To address the needs of the human in space, a knowledge of the space environment becomes necessary. Both an understanding of the environment itself and an understanding of the physiological adaptations to that environment must inform design parameters. The space environment permits the fabrication of novel biomaterials that cannot be produced on Earth, but benefit Earth. Similarly, designing a biomaterial to address a space-based challenge may lead to novel biomaterials that will ultimately benefit Earth. This review describes several persistent challenges to human space exploration, a variety of biomaterials that might mitigate those challenges, and considers a special category of space biomaterial. STATEMENT OF SIGNIFICANCE: This work is a review of the major human and environmental challenges facing human spaceflight, and where biomaterials may mitigate some of those challenges. The work is significant because a broad range of biomaterials are applicable to the human space program, but the overlap is not widely known amongst biomaterials researchers who are unfamiliar with the challenges to human spaceflight. Additionaly, there are adaptations to microgravity that mimic the pathology of certain disease states ("terrestrial analogs") where treatments that help the overwhelmingly healthy astronauts can be applied to help those with the desease. Advances in space technology have furthered the technology in that field on Earth. By outlining ways that biomaterials can promote human space exploration, space-driven advances in biomaterials will further biomaterials technology.

Synergism between Rifampicin and Cationic Polyurethanes Overcomes Intrinsic Resistance of Escherichia coli

Antibiotic-resistant Gram-negative bacteria are emergent pathogens, causing millions of infections worldwide. While there are several classes of antibiotics that are effective against Gram-positive bacteria, the outer membrane (OM) of Gram-negative bacteria excludes high-molecular-weight hydrophobic antibiotics, making these species intrinsically resistant to several classes of antibiotics, including polyketides, aminocoumarins, and macrolides. The overuse of antibiotics such as β-lactams has also promoted the spread of resistance genes throughout Gram-negative bacteria, including the production of extended spectrum β-lactamases (ESBLs). The combination of innate and acquired resistance makes it extremely challenging to identify antibiotics that are effective against Gram-negative bacteria. In this study, we have demonstrated the synergistic effect of outer membrane-permeable cationic polyurethanes with rifampicin, a polyketide that would otherwise be excluded by the OM, on different strains of E. coli, including a clinically isolated uropathogenic multidrug-resistant (MDR) E. coli. Rifampicin combined with a low-dose treatment of a cationic polyurethane reduced the MIC in E. coli of rifampicin by up to 64-fold. The compositions of cationic polyurethanes were designed to have low hemolysis and low cell cytotoxicity while maintaining high antibacterial activity. Our results demonstrate the potential to rescue the large number of available OM-excluded antibiotics to target normally resistant Gram-negative bacteria via synergistic action with these cationic polyurethanes, acting as a novel antibiotic adjuvant class.

Favorable Antibacterial, Antibiofilm, Antiadhesion to Cells, and Biocompatible Polyurethane by Facile Surface Functionalization

It is of paramount importance to prohibit biofilm formation in a wide range of implant devices, such as thermoplastic polyurethane (PU)-based catheters. It is possible only by means of a multifunctional material that provides fast and effective antibacterial activity, proper biocompatibility, and low bacterial and cell adhesion. In this paper, a facile chemistry approach has been developed to modify biomedical-grade PU with PU species, containing reactive uretdione functional groups for functionalization with the contact-type polyguanidine bactericidal agent and oxidized dextran as an antifouling polymer without sacrificing the thermal and mechanical properties. The resulting PU possesses broad-spectrum contact-active antibacterial activity against Gram-negative and Gram-positive bacteria with fast kinetics. The excellent antifouling capacity was confirmed by low nonspecific protein adsorption and reduced adhesion of fibroblast cells by ≥ 90%. In addition to antiadhesive and antibiofilm properties, high cell viability (>90%) and low hemolysis rate (HR < 1%) verified favorable cytocompatibility. Hence, the strategy followed to functionalize PUs in this paper might be considered to modify PU-based biomedical devices.

Cationic Homopolymers Inhibit Spore and Vegetative Cell Growth of Clostridioides difficile

A wide range of synthetic polymers have been explored for antimicrobial activity. These materials usually contain both cationic and hydrophobic subunits because these two characteristics are prominent among host-defense peptides. Here, we describe a series of nylon-3 polymers containing only cationic subunits and their evaluation against the gastrointestinal, spore-forming pathogen Clostridioides difficile. Despite their highly hydrophilic nature, these homopolymers showed efficacy against both the vegetative and spore forms of the bacterium, including an impact on C. difficile spore germination. The polymer designated P34 demonstrated the greatest efficacy against C. difficile strains, along with low propensities to lyse human red blood cells or intestinal epithelial cells. To gain insight into the mechanism of P34 action, we evaluated several cell-surface mutant strains of C. difficile to determine the impacts on growth, viability, and cell morphology. The results suggest that P34 interacts with the cell wall, resulting in severe cell bending and death in a concentration-dependent manner. The unexpected finding that nylon-3 polymers composed entirely of cationic subunits display significant activities toward C. difficile should expand the range of other polymers considered for antibacterial applications.

Facile Synthesis of Imidazolium-Based Block Copolypeptides with Excellent Antimicrobial Activity

Antimicrobial polypeptides are promising mimics of antimicrobial peptides (AMPs) with low risks of antimicrobial resistance (AMR). Polypeptides with facile and efficient production, high antimicrobial activity, and low toxicity toward mammalian cells are highly desirable for practical applications. Herein, triblock copolypeptides with chloro groups (PPG_n-PCPBLG_m) and different main-chain lengths were synthesized via an ultrafast ring-opening polymerization (ROP) using a macroinitiator, namely poly(propylene glycol) bis(2-aminopropyl ether), and purified or nonpurified monomer (i.e., CPBLG-NCA). PPG_n-PCPBLG_m with 90 amino acid residues can be readily prepared within 300 s. Imidazolium-based block copolypeptides (PPG_n-PIL_m) were facilely prepared via nucleophilic substitution of PPG_n-PCPBLG_m with NaN₃ and subsequent "click" chemistry. α-Helical PPG_n-PIL_m can self-assemble into nanostructured and cationic micelles which displayed highly potent antimicrobial activity and low hemolysis. The top-performing material, namely PPG₃₄-PIL₇₀, showed low minimum inhibitory concentration (MIC) against both Gram-positive S. aureus and Gram-negative E. coli (25 μg mL^-1). It also displayed low toxicity against mouse embryonic fibroblast (NIH 3T3) and human embryonic kidney (293T) cells at 2× MIC.

Efficient synthesis and excellent antimicrobial activity of star-shaped cationic polypeptides with improved biocompatibility

Antimicrobial peptides (AMPs) have been considered as a promising new tool to combat the antimicrobial resistance (AMR) crisis. However, the high toxicity and high cost of AMPs hampered their further development. Herein, a series of star poly(_L-lysine) (PLL) homo- and copolymers with excellent antimicrobial activity and improved biocompatibility were prepared by the combination of ultra-fast ring opening polymerization (ROP) and side-chain modification. The amine-terminated polyamidoamine dendrimer (Gx-PAMAM) mediated ROP of Nε-tert-butyloxycarbonyl-_L-lysine N-carboxyanhydride (Boc-_L-Lys-NCA) and γ-benzyl-_L-glutamic acid-based N-carboxyanhydride (PBLG-NCA) was able to prepare star PLL homo- and copolymers with 400 residues within 50 min. While the star PLL homopolymers exhibited low minimum inhibitory concentration (MIC = 50-200 μg mL^-1) against both Gram-positive and Gram-negative bacteria (i.e., S. aureus and E. coli), they showed high toxicity against various mammalian cell lines. The star PLL copolymers with low contents of hydrophobic and hydroxyl groups showed enhanced antimicrobial activity (MIC = 25-50 μg mL^-1) and improved mammalian cell viability. Both SEM and CLSM results indicated the antimicrobial mechanism of membrane disruption.

Towards designing globular antimicrobial peptide mimics: role of polar functional groups in biomimetic ternary antimicrobial polymers

Using atomistic molecular dynamics simulations, we study the interaction of ternary methacrylate polymers, composed of charged cationic, hydrophobic and neutral polar groups, with model bacterial membrane. Our simulation data shows that the random ternary polymers can penetrate deep into the membrane interior and partitioning of even a single polymer has a pronounced effect on the membrane structure. Lipid reorganization, on polymer binding, shows a strong affinity of the ternary polymer for anionic POPG lipids and the same is compared with the control case of binary polymers (only cationic and hydrophobic groups). While binary polymers exhibit strong propensity of acquired amphiphilic conformations upon membrane insertion, our results strongly suggest that such amphiphilic conformations are absent in the case of random ternary polymers. The ternary polymers adopt a more folded conformation, staying aligned in the direction of the membrane normal and subsequently penetrating deeper into the membrane interior suggesting a novel membrane partitioning mechanism without amphiphilic conformations. Finally, we also examine the interactions of ternary polymer aggregates with model bacterial membranes, which show that replacing some of the hydrophobic groups by polar groups leads to weakly held ternary aggregates enabling them to undergo rapid partitioning and insertion into membrane interior. Our work thus underscores the role of inclusion of polar groups into the framework of traditional binary biomimetic antimicrobial polymers and suggests different mode of partitioning into bacterial membranes, mimicking antimicrobial mechanism of globular antimicrobial peptides like Defensin.

Effect of polyelectrolyte complex formation on the antibacterial activity of copolymer of alkylated 4-vinylpyridine

Polymers bearing quaternized 4-vinylpyridine (QVP) groups are known for their antibacterial activities and these polymers can form polyelectrolyte complexes (PEC) with polyanions through electrostatic interactions. PEC formation can be used to adjust the antibacterial activity of polymers of QVP, deliver active molecules, or design antibacterial supramolecular structures. However, the antibacterial activity of PECs of QVP polymers has not been investigated. In this study, a copolymer of QVP was mixed with polyacrylic acid in various molar ratios of components to form PECs. Hydrodynamic diameters and zeta potentials of formed PECs were determined by dynamic and electrophoretic light scattering spectroscopy techniques. The zeta potentials of PECs changed between –24 and +16 mV with variation in the ratio of components. Antibacterial assays against E. coli revealed a relation of PEC formation with antibacterial activity since MIC values changed between 125–1000 μg/mL according to the ratio of components.

Effect of hydrophilic groups on the bioactivity of antimicrobial polymers

Antimicrobial polymers have recently been investigated as potential treatments to combat multidrug-resistant pathogens.

The Mechanisms and the Applications of Antibacterial Polymers in Surface Modification on Medical Devices

Medical device contamination caused by microbial pathogens such as bacteria and fungi has posed a severe threat to the patients' health in hospitals. Due to the increasing resistance of pathogens to antibiotics, the efficacy of traditional antibiotics treatment is gradually decreasing for the infection treatment. Therefore, it is urgent to develop new antibacterial drugs to meet clinical or civilian needs. Antibacterial polymers have attracted the interests of researchers due to their unique bactericidal mechanism and excellent antibacterial effect. This article reviews the mechanism and advantages of antimicrobial polymers and the consideration for their translation. Their applications and advances in medical device surface coating were also reviewed. The information will provide a valuable reference to design and develop antibacterial devices that are resistant to pathogenic infections.

Positively Charged Polymers as Promising Devices against Multidrug Resistant Gram-Negative Bacteria: A Review

Antibiotic resistance has increased markedly in Gram-negative bacteria, causing severe infections intractable with traditional drugs and amplifying mortality and healthcare costs. Consequently, to find novel antimicrobial compounds, active on multidrug resistant bacteria, is mandatory. In this regard, cationic antimicrobial peptides (CAMPs)—able to kill pathogens on contact—could represent an appealing solution. However, low selectivity, hemolytic toxicity and cost of manufacturing, hamper their massive clinical application. In the recent years—starting from CAMPs as template molecules—less toxic and lower-cost synthetic mimics of CAMPs, including cationic peptides, polymers and dendrimers, have been developed. Although the pending issue of hemolytic toxicity and biodegradability is still left not completely solved, cationic antimicrobial polymers (CAPs), compared to small drug molecules, thanks to their high molecular weight, own appreciable selectivity, reduced toxicity toward eukaryotic cells, more long-term activity, stability and non-volatility. With this background, an updated overview concerning the main manufactured types of CAPs, active on Gram-negative bacteria, is herein reported, including synthetic procedure and action’s mechanism. Information about their structures, antibacterial activity, advantages and drawbacks, was reported in the form of tables, which allow faster consultation and quicker learning concerning current CAPs state of the art, in order not to retrace reviews already available.

Hemolytic and Antimicrobial Activities of a Series of Cationic Amphiphilic Copolymers Comprised of Same Centered Comonomers with Thiazole Moieties and Polyethylene Glycol Derivatives

A series of well-defined antimicrobial polymers composed of comonomers bearing thiazole ring (2-(((2-(4-methylthiazol-5-yl)ethoxy)carbonyl)oxy)ethyl methacrylate monomer (MTZ)) and non-hemotoxic poly(ethylene glycol) side chains (poly(ethylene glycol) methyl ether methacrylate (PEGMA)) were synthesized by reversible addition-fragmentation chain transfer (RAFT) polymerization. By post-polymerization functionalization strategy, polymers were quaternized with either butyl or octyl iodides to result in cationic amphiphilic copolymers incorporating thiazolium groups, thus with variable hydrophobic/hydrophilic balance associated to the length of the alkylating agent. Likewise, the molar percentage of PEGMA was modulated in the copolymers, also affecting the amphiphilicity. The antimicrobial activities of these cationic polymers were determined against Gram-positive and Gram-negative bacteria and fungi. Minimum inhibitory concentration (MIC) was found to be dependent on both length of the alkyl hydrophobic chain and the content of PEGMA in the copolymers. More hydrophobic octylated copolymers were found to be more effective against all tested microorganisms. The incorporation of non-ionic hydrophilic units, PEGMA, reduces the hydrophobicity of the system and the activity is markedly reduced. This effect is dramatic in the case of butylated copolymers, in which the hydrophobic/hydrophilic balance is highly affected. The hemolytic properties of polymers analyzed against human red blood cells were greatly affected by the hydrophobic/hydrophilic balance of the copolymers and the content of PEGMA, which drastically reduces the hemotoxicity. The copolymers containing longer hydrophobic chain, octyl, are much more hemotoxic than their corresponding butylated copolymers.

Antifogging/Antibacterial Coatings Constructed by N-Hydroxyethylacrylamide and Quaternary Ammonium-Containing Copolymers

Endoscopic surgery has gained widespread applications in various clinical departments, and endoscope surfaces with antifogging and antibacterial properties are essential for elaborate procedures. In this work, novel antifogging/antibacterial coatings were developed from a cationic copolymer and a hydrophilic copolymer, polyhedral oligomeric silsesquioxane-poly(quaternary ammonium compound-co-2-aminoethyl methacrylate hydrochloride) [POSS-P(QAC-co-AEMA)] and poly(N-hydroxyethylacrylamide-co-glycidyl methacrylate) [P(HEAA-co-GMA)] via a facile and green blending method. Such transparent coatings showed excellent antifogging performance under both in vitro and in vivo fogging conditions, mainly attributed to the high water-absorbing capability of HEAA and QAC. Antibacterial assays proved that the blending coatings had a superior antibacterial property, which could be improved with the proportion of POSS-P(QAC-co-AEMA) because of the bactericidal efficiency of cationic QAC. Meanwhile, owing to the high hydratability of HEAA, the blending coatings exhibited a bacteria-repelling property. By simply tuning the blending ratio of POSS-P(QAC-co-AEMA) and P(HEAA-co-GMA), the comprehensive bacteria-killing and bacteria-repelling properties of the coatings were achieved. Moreover, after incubating with red blood cells, the prepared blending coatings presented a lower hemolytic rate of less than 5%. The findings provided a potential means for addressing the challenge of fogging and bacterial contamination occurring in endoscopic lenses and other medical devices.

pH-Degradable imidazolium oligomers as antimicrobial materials with tuneable loss of activity

Imidazolium oligomers containing pH-sensitive linkers degrade under basic conditions to less active fragments that slow the development of bacterial resistance.

Providing Antibacterial Activity to Poly(2-Hydroxy Ethyl Methacrylate) by Copolymerization with a Methacrylic Thiazolium Derivative

Antimicrobial polymers and coatings are potent types of materials for fighting microbial infections, and as such, they have attracted increased attention in many fields. Here, a series of antimicrobial copolymers were prepared by radical copolymerization of 2-hydroxyethyl methacrylate (HEMA), which is widely employed in the manufacturing of biomedical devices, and the monomer 2-(4-methylthiazol-5-yl)ethyl methacrylate (MTA), which bears thiazole side groups susceptible to quaternization, to provide a positive charge. The copolymers were further quantitatively quaternized with either methyl or butyl iodide, as demonstrated by nuclear magnetic resonance (NMR) and attenuated total reflection Fourier-transform infrared spectroscopy (ATR-FTIR). Then, the polycations were characterized by zeta potential measurements to evaluate their effective charge and by differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) to evaluate their thermal properties. The ζ-potential study revealed that the quaternized copolymers with intermediate compositions present higher charges than the corresponding homopolymers. The cationic copolymers showed greater glass transition temperatures than poly(2-hydroxyethyl methacrylate) (PHEMA), with values higher than 100 °C, in particular those quaternized with methyl iodide. The TGA studies showed that the thermal stability of polycations varies with the composition, improving as the content of HEMA in the copolymer increases. Microbial assays targeting Gram-positive and Gram-negative bacteria confirmed that the incorporation of a low number of cationic units into PHEMA provides antimicrobial character with a minimum inhibitory concentration (MIC) of 128 µg mL-1. Remarkably, copolymers with MTA molar fractions higher than 0.50 exhibited MIC values as low as 8 µg mL-1.

Exploiting Macromolecular Design To Optimize the Antibacterial Activity of Alkylated Cationic Oligomers

There is growing interest in synthetic polymers which co-opt the structural features of naturally occurring antimicrobial peptides. However, our understanding of how macromolecular architecture affects antibacterial activity remains limited. To address this, we investigated whether varying architectures of a series of block and statistical co-oligomers influenced antibacterial and hemolytic activity. Cu(0)-mediated polymerization was used to synthesize oligomers constituting 2-(Boc-amino)ethyl acrylate units and either diethylene glycol ethyl ether acrylate (DEGEEA) or poly(ethylene glycol) methyl ether acrylate units with varying macromolecular architecture; subsequent deprotection produced primary amine functional oligomers. Further guanylation provided an additional series of antimicrobial candidates. Both chemical composition and macromolecular architecture were shown to affect antimicrobial activity. A broad spectrum antibacterial oligomer (containing guanidine moieties and DEGEEA units) was identified that possessed promising activity (MIC = 2 μg mL^-1) toward both Gram-negative and Gram-positive bacteria. Bacterial membrane permeabilization was identified as an important contributor to the mechanism of action.

Synthesis of Amphiphilic Copolymers Containing Ciprofloxacin and Amine Groups and Their Antimicrobial Performances As Revealed by Confocal Laser-Scanning Microscopy and Atomic-Force Microscopy

Two series of amphiphilic antimicrobial copolymers containing ciprofloxacin (CPF) and amine functional groups have been synthesized via free-radical copolymerization. The chemical structures of the different amine groups and the copolymer compositions have been systematically varied to study how the structure of the copolymer exerts an influence on the antibacterial activity. The viability of Escherichia coli in the presence of antimicrobial copolymers was observed by confocal laser-scanning microscopy (CLSM). CLSM as well as atomic-force microscopy (AFM) were applied to visualize changes in morphology of bacteria treated with antimicrobial copolymers and elucidate the antimicrobial mechanism of the antimicrobial copolymers. Morphological changes of bacteria observed via AFM and CLSM demonstrated that the antibacterial mechanism was due to the disruption of the bacterial membrane. The destruction of the cell membrane was also confirmed by the leakage of intracellular components, which had a strong absorbance at 260 nm. The inhibitory process was monitored by UV absorption dynamically.

Nanocomposites: suitable alternatives as antimicrobial agents

The exploration of nanocomposites has gained a strong research following over the last decade. These materials have been heavily exploited in several fields, with applications ranging from biosensors to biomedicine. Among these applications, great advances have been made in the field of microbiology, specifically as antimicrobial agents. This review aims to provide a comprehensive account of various nanocomposites that elucidate promising antimicrobial activity. The composition, physical and chemical properties, as well as the antimicrobial performance of these nanocomposites, are discussed in detail.

Designing of membrane-active nano-antimicrobials based on cationic copolymer functionalized nanodiamond: Influence of hydrophilic segment on antimicrobial activity and selectivity

Designing cationic nano-antimicrobial is a promising solution for combating drug resistant microbes. In this work, hydrophilic cationic copolymer was applied for the surface functionalization of nanodiamonds (NDs) aiming at developing a highly membrane-active nano-antibacterial agent with satisfactory selectivity. As a result, after functionalization, the increased repulsive forces within NDs and interaction with solvent molecular network made the heavily aggregated pristine NDs break down into tiny nanoparticles with particle size ranging from 10 to 100 nm. The improved hydrophilicity and enlarged surface area endowed QND-H₅ and QND-H₁₀ a powerful bactericidal capability toward both of Gram-negative Escherichia coli (E. coli) and Gram-positive Staphylococcus aureus (S. aureus). In the further bactericidal assessment, it was also demonstrated that the formation of hydrogen bonding between the 2-hydroxyethyl methacrylate (HEMA) side chains and lipid head groups of bacterial membrane also contributed to the enhanced bactericidal ability. Field emission scanning electron microscopy analysis confirmed that as-prepared nano-hybrid acted bactericidal ability via physical nature of outer membrane and cytoplasmic membrane-separating destruction mechanism toward E. coli, which may derive from the hydrogen bonding ability, making them more effective toward bacterial. More importantly, it was found that with just 10% of HEMA, QND-H₁₀ displayed good selectivity toward bacteria over mammalian cells as shown by the high HC₅₀ values with relatively low MIC values, suggesting the great potential application in medical fields. These results indicate that hydrogen bonding is an important element to achieve the desired high antibacterial activity and selectivity, particularly when cationic nano-antibacterial agents are required for medical application.

Leucine-Based Polymer Architecture-Induced Antimicrobial Properties and Bacterial Cell Morphology Switching

To evaluate the comparative antibacterial activity of leucine-based cationic polymers having linear, hyperbranched, and star architectures containing both hydrophilic and hydrophobic segments against Gram-negative bacterium, Escherichia coli (E. coli), herein we performed zone of inhibition study, minimum inhibitory concentration (MIC) calculation, and bacterial growth experiment. The highest antibacterial activity in terms of the MIC value was found in hyperbranched and star architectures because of the greater extent of cationic and hydrophobic functionality, enhancing cell wall penetration ability compared to that of the linear polymer. The absence of the bacterial regrowth stage in the growth curve exhibited the highest bactericidal capacity of star polymers, when untreated cells (control) already reached to the stationary phase, whereas the bacterial regrowth stage with a delayed lag phase was critically observed for linear and hyperbranched architectures displaying lower bactericidal efficacy. Coagulation of E. coli cells, switching of cell morphology from rod to sphere, and lengthening due to stacking in an antimicrobial polymer-treated environment at the bacterial regrowth stage in liquid media were visualized critically by field emission scanning electron microscopy and confocal fluorescence microscopy instruments in the presence of 4',6-diamidino-2-phenylindole stain.

Self-immolative polymers with potent and selective antibacterial activity by hydrophilic side chain grafting

Self-immolative polymers, which exert potent antibacterial activity with low hemolytic toxicity to red blood cells, are triggered to unzip into small molecules by a chemical stimulus.

Biomimetic antimicrobial polymers: recent advances in molecular design

The increasing prevalence of antibiotic-resistant bacterial infections, coupled with the decline in the number of new antibiotic drug approvals, has created a therapeutic gap that portends an emergent public health crisis.

Cationic Poly(benzyl ether)s as Self-Immolative Antimicrobial Polymers

Self-immolative polymers (SIMPs) are macromolecules that spontaneously undergo depolymerization into small molecules when triggered by specific external stimuli. We report here the first examples of antimicrobial SIMPs with potent, rapid, and broad-spectrum bactericidal activity. Their antibacterial and hemolytic activities were examined as a function of cationic functionality. Polymers bearing primary ammonium cationic groups showed more potent bactericidal activity against Escherichia coli, relative to tertiary and quaternary ammonium counterparts, whereas the quaternary ammonium polymers showed the lowest hemolytic toxicity. These antibacterial polycations undergo end-to-end depolymerization when triggered by an externally applied stimulus. Specifically, poly(benzyl ether)s end-capped with a silyl ether group and bearing pendant allyl side chains were converted to polycations by photoinitiated thiol-ene radical addition using cysteamine HCl. The intact polycations are stable in solution, but they spontaneously unzip into their component monomers upon exposure to fluoride ions, with excellent sensitivity and selectivity. Upon triggered depolymerization, the antibacterial potency was largely retained but the hemolytic toxicity was substantially reduced. Thus, we reveal the first example of a self-immolative antibacterial polymer platform that will enable antibacterial materials to spontaneously unzip into biologically active small molecules upon the introduction of a specifically designed stimulus.

Quaternary ammonium-based biomedical materials: State-of-the-art, toxicological aspects and antimicrobial resistance

Microbial infections affect humans worldwide. Many quaternary ammonium compounds have been synthesized that are not only antibacterial, but also possess antifungal, antiviral and anti-matrix metalloproteinase capabilities. Incorporation of quaternary ammonium moieties into polymers represents one of the most promising strategies for preparation of antimicrobial biomaterials. Various polymerization techniques have been employed to prepare antimicrobial surfaces with quaternary ammonium functionalities; in particular, syntheses involving controlled radical polymerization techniques enable precise control over macromolecular structure, order and functionality. Although recent publications report exciting advances in the biomedical field, some of these technological developments have also been accompanied by potential toxicological and antimicrobial resistance challenges. Recent evidenced-based data on the biomedical applications of antimicrobial quaternary ammonium-containing biomaterials that are based on randomized human clinical trials, the golden standard in contemporary medicinal science, are included in the present review. This should help increase visibility, stimulate debates and spur conversations within a wider scientific community on the implications and plausibility for future developments of quaternary ammonium-based antimicrobial biomaterials.

MALDI MS analysis, disk diffusion and optical density measurements for the antimicrobial effect of zinc oxide nanorods integrated in graphene oxide nanostructures

Graphene oxide-zinc oxide hybrid nanostructures were synthesized and they demonstrated significant and promising antimicrobial activity on pathogenic bacteria. The combination of graphene oxide with zinc oxide nanorods showed an impressive antibacterial effect under intense scrutiny as compared with individual graphene oxide or zinc oxide nanomaterials. The characterization and investigation of GO-ZnO nanorod hybrid nanostructures were conducted using UV, FTIR, XRD, SEM, EDX and TEM measurements. The antimicrobial activity of the above hybrid material was evaluated by various methods including MALDI-MS analysis, a disk diffusion assay and optical density measurements.