Magnetophoretic cell sorting is a function of antibody binding capacity

Simultaneous and Multimodal Antigen-Binding Profiling and Isolation of Rare Cells via Quantitative Ferrohydrodynamic Cell Separation

Simultaneous cell profiling and isolation based on cellular antigen-binding capacity plays an important role in understanding and treating diseases. However, fluorescence-activated cell sorting (FACS) and magnetic-activated cell sorting (MACS) are not able to meet this need, due to their requirement for a large quantity of target cells and the limitation stemming from bimodal separation. Here we report a microfluidic method, termed quantitative ferrohydrodynamic cell separation (qFCS), that achieved multimodal rare cell sorting and simultaneous antigen profiling at a ∼30,000 cell min^-1 throughput with a 96.49% recovery rate and a 98.72% purity of recovered cells. qFCS profiles and sorts cells via cellular magnetic content of the magnetically labeled cells, which correlates to cellular antigen-binding capacity. By integrating cellular magnetophoresis and diamagnetophoresis in biocompatible ferrofluids, we demonstrate that the resulting qFCS device can accurately profile and isolate rare cells even when present at ∼1:50,000 target to background cells frequency. We show that the qFCS device could accurately profile and isolate T lymphocytes based on a low-expression CD154 antigen and allow on-device analysis of cells after processing. This method could address the need for simultaneous and multimodal rare cell isolation and profiling in disease diagnostics, prognostics, and treatment.

Immunomagnetic leukocyte differential in whole blood on an electronic microdevice

Leukocytes are the frontline defense mechanism of the immune system. Their composition dynamically changes as a response to a foreign body, infection, inflammation, or other malignant behavior occurring within the body. Monitoring the composition of leukocytes, namely leukocyte differential, is a crucial assay periodically performed to diagnose an infection or to assess a person's vulnerability for a health anomaly. Currently, leukocyte differential analysis is performed using hematology analyzers or flow cytometers, both of which are bulky instruments that require trained and certified personnel for operation. In this work, we demonstrate a new technique to obtain leukocyte differentials in a highly portable and integrated microfluidic chip by magnetically analyzing the CD33 expression of leukocytes. When benchmarked against conventional laboratory instruments, our technology demonstrated <5% difference on average for all subtypes. Our results show that hematology testing could be performed beyond the centralized laboratories at a low cost and ultimately provide point-of-care and at-home testing opportunities.

Electronic measurement of cell antigen expression in whole blood

Membrane antigens are phenotypic signatures of cells used for distinguishing various subpopulations and, therefore, are of great interest for diagnosis of diseases and monitoring of patients in hematology and oncology. Existing methods to measure antigen expression of a target subpopulation in blood samples require labor-intensive lysis of contaminating cells and subsequent analysis with complex and bulky instruments in specialized laboratories. To address this long-standing limitation in clinical cytometry, we introduce a microchip-based technique that can directly measure surface expression of target cells in hematological samples. Our microchip isolates an immunomagnetically-labeled target cell population from the contaminating background in whole blood and then utilizes the differential responses of target cells to on-chip magnetic manipulation to estimate their antigen expression. Moreover, manipulating cells with chip-sized permanent magnets and performing quantitative measurements via an on-chip electrical sensor network allows the assay to be performed in a portable platform with no reliance on laboratory infrastructure. Using our technique, we could successfully measure expressions of the CD45 antigen that is commonly expressed by white blood cells, as well as CD34 that is expressed by scarce hematopoietic progenitor cells, which constitutes only ∼0.0001% of all blood cells, directly from whole blood. With our technology, flow cytometry can potentially become a rapid bedside or at-home testing method that is available around the clock in environments where this invaluable assay with proven clinical utility is currently either outsourced or not even accessible.

The Origins and the Current Applications of Microfluidics-Based Magnetic Cell Separation Technologies

The magnetic separation of cells based on certain traits has a wide range of applications in microbiology, immunology, oncology, and hematology. Compared to bulk separation, performing magnetophoresis at micro scale presents advantages such as precise control of the environment, larger magnetic gradients in miniaturized dimensions, operational simplicity, system portability, high-throughput analysis, and lower costs. Since the first integration of magnetophoresis and microfluidics, many different approaches have been proposed to magnetically separate cells from suspensions at the micro scale. This review paper aims to provide an overview of the origins of microfluidic devices for magnetic cell separation and the recent technologies and applications grouped by the targeted cell types. For each application, exemplary experimental methods and results are discussed.

Electronic profiling of membrane antigen expression via immunomagnetic cell manipulation

Membrane antigens control cell function by regulating biochemical interactions and hence are routinely used as diagnostic and prognostic targets in biomedicine. Fluorescent labeling and subsequent optical interrogation of cell membrane antigens, while highly effective, limit expression profiling to centralized facilities that can afford and operate complex instrumentation. Here, we introduce a cytometry technique that computes surface expression of immunomagnetically labeled cells by electrically tracking their trajectory under a magnetic field gradient on a microfluidic chip with a throughput of >500 cells per min. In addition to enabling the creation of a frugal cytometry platform, this immunomagnetic cell manipulation-based measurement approach allows direct expression profiling of target subpopulations from non-purified samples. We applied our technology to measure epithelial cell adhesion molecule expression on human breast cancer cells. Once calibrated, surface expression and size measurements match remarkably well with fluorescence-based measurements from a commercial flow cytometer. Quantitative measurements of biochemical and biophysical cell characteristics with a disposable cytometer have the potential to impact point of care testing of clinical samples particularly in resource limited settings.

Tessellated permanent magnet circuits for flow-through, open gradient separations of weakly magnetic materials

Emerging microfluidic-based cell assays favor label-free red blood cell (RBC) depletion. Magnetic separation of RBC is possible because of the paramagnetism of deoxygenated hemoglobin but the process is slow for open-gradient field configurations. In order to increase the throughput, periodic arrangements of the unit magnets were considered, consisting of commercially available Nd-Fe-B permanent magnets and soft steel flux return pieces. The magnet design is uniquely suitable for multiplexing by magnet tessellation, here meaning the tiling of the magnet assembly cross-sectional plane by periodic repetition of the magnet and the flow channel shapes. The periodic pattern of magnet magnetizations allows a reduction of the magnetic material per channel with minimal distortion of the field cylindrical symmetry inside the magnet apertures. A number of such magnet patterns are investigated for separator performance, size and economy with the goal of designing an open-gradient magnetic separator capable of reducing the RBC number concentration a hundred-fold in 1 mL whole blood per hour.

Deterministic sequential isolation of floating cancer cells under continuous flow

Isolation of rare cells, such as circulating tumor cells, has been challenging because of their low abundance and limited timeframes of expressions of relevant cell characteristics. In this work, we devise a novel hydrodynamic mechanism to sequentially trap and isolate floating cells in biosamples. We develop a microfluidic device for the sequential isolation of floating cancer cells through a series of microsieves to obtain up to 100% trapping yield and >95% sequential isolation efficiency. We optimize the trappers' dimensions and locations through both computational and experimental analyses using microbeads and cells. Furthermore, we investigated the functional range of flow rates for effective sequential cell isolation by taking the cell deformability into account. We verify the cell isolation ability using the human breast cancer cell line MDA-MB-231 with perfect agreement with the microbead results. The viability of the isolated cells can be maintained for direct identification of any cell characteristics within the device. We further demonstrate that this device can be applied to isolate the largest particles from a sample containing multiple sizes of particles, revealing its possible applicability in isolation of circulating tumor cells in cancer patients' blood. Our study provides a promising sequential cell isolation strategy with high potential for rapid detection and analysis of general floating cells, including circulating tumor cells and other rare cell types.

Isolation and enrichment of mouse female germ line stem cells

Objective

The existence of female germ-line stem cells (FGSCs) has been the subject of a wide range of recent studies. Successful isolation and culture of FGSCs could facilitate studies on regenerative medicine and infertility treatments in the near future. Our aim in the present study was evaluation of the most commonly used techniques in enrichment of FGSCs and in establishment of the best procedure.

Materials and Methods

In this experimental study, after digesting neonate ovary from C57Bl/6 mice, we performed 2 different isolation experiments: magnetic activated cell sorting (MACS) and pre-plating. MACS was applied using two different antibodies against mouse vasa homolog (MVH) and stage-specific embryonic antigen-1 (SSEA1) markers. After the cells were passaged and proliferated in vitro, colony-forming cells were characterized using reverse transcription-polymerase chain reaction (RT-PCR) (for analysis of expression of Oct4, Nanog, C-kit, Fragilis, Mvh, Dazl, Scp3 and Zp3), alkaline phosphatase (AP) activity test and immunocytochemistry.

Results

Data showed that colonies can be seen more frequently in pre-plating technique than that in MACS. Using the SSEA1 antibody with MACS, 1.98 ± 0.49% (Mean ± SDV) positive cells were yield as compared to the total cells sorted. The colonies formed after pre-plating expressed pluripotency and germ stem cell markers (Oct4, Nanog, C-kit, Fragilis, Mvh and Dazl) whereas did not express Zp3 and Scp3 at the mRNA level. Immunocytochemistry in these colonies further confirmed the presence of OCT4 and MVH proteins, and AP activity measured by AP-kit showed positive reaction.

Conclusion

We established a simple and an efficient pre-plating technique to culture and to enrich FGSCs from neonatal mouse ovaries.

Core-shell silver nanoparticles for optical labeling of cells

Silver nanoparticles have been modified with self-assembled monolayers of hydroxyl-terminated long chain thiols and encapsulated with a silica shell. The resulting core-shell nanoparticles were used as optical labels for cell analysis using flow cytometry and microscopy. The excitation of plasmon resonances in nanoparticles results in strong depolarized scattering of visible light, permitting detection at the single nanoparticle level. The nanoparticles were modified with neutravidin via epoxide-azide coupling chemistry, to which biotinylated antibodies targeting cell surface receptors were bound. The nanoparticle labels exhibited long-term stability in solutions with high salt concentrations without aggregation or silver etching. Labeled cells exhibited two orders of magnitude enhancement of the scattering intensity compared with unlabeled cells.

Continuous separation principles using external microaction forces

During the past decade, methods for the continuous separation of microparticles with microaction forces have rapidly advanced. Various action forces have been used in designs of both microchannel and capillary continuous separation systems, which depend on properties such as conductivity, permittivity, absorptivity, refractive index, magnetic susceptibility, and compressibility. Particle migration velocity has been used to characterize the particles. Biological cells have been the most interesting targets of these continuous separation methods.

Cell separation: Terminology and practical considerations

Cell separation is a powerful tool in biological research. Increasing usage, particularly within the tissue engineering and regenerative medicine communities, means that researchers from a diverse range of backgrounds are utilising cell separation technologies. This review aims to offer potential solutions to cell sorting problems and to clarify common ambiguities in terminology and experimental design. The frequently used cell separation terms of 'purity', 'recovery' and 'viability' are discussed, and attempts are made to reach a consensus view of their sometimes ambiguous meanings. The importance of appropriate experimental design is considered, with aspects such as marker expression, tissue isolation and original cell population analysis discussed. Finally, specific technical issues such as cell clustering, dead cell removal and non-specific antibody binding are considered and potential solutions offered. The solutions offered may provide a starting point to improve the quality of cell separations achieved by both the novice and experienced researcher alike.

Emerging technologies for CTC detection based on depletion of normal cells

Properly conducted, an enrichment step can improve selectivity, sensitivity, yield, and most importantly, significantly reduce the time needed to isolate rare circulating tumor cells (CTCs). The enrichment process can be broadly categorized as positive selection versus negative depletion, or in some cases, a combination of both. We have developed a negative depletion CTC enrichment strategy that relies on the removal of normal cells using immunomagnetic separation in the blood of cancer patients. This method is based on the combination of magnetic and fluid forces in an axial, laminar flow in long cylinders placed in quadrupole magnets. Using this technology, we have successfully isolated CTCs from patients with breast carcinoma and squamous cell carcinoma of the head and neck. In contrast to a positive selection methodology, this approach provides an unbiased characterization of these cells, including markers associated with epithelial mesenchymal transition.

Nanoparticles in molecular diagnostics

The aim of this chapter is to provide an overview of the available and emerging molecular diagnostic methods that take advantage of the unique nanoscale properties of nanoparticles (NPs) to increase the sensitivity, detection capabilities, ease of operation, and portability of the biodetection assemblies. The focus will be on noble metal NPs, especially gold NPs, fluorescent NPs, especially quantum dots, and magnetic NPs, the three main players in the development of probes for biological sensing. The chapter is divided into four sections: a first section covering the unique physicochemical properties of NPs of relevance for their utilization in molecular diagnostics; the second section dedicated to applications of NPs in molecular diagnostics by nucleic acid detection; and the third section with major applications of NPs in the area of immunoassays. Finally, a concluding section highlights the most promising advances in the area and presents future perspectives.

Perspectives on utilizing unique features of microfluidics technology for particle and cell sorting

Sample preparation is often the most tedious and demanding step in an assay, but it also plays an essential role in determining the quality of results. As biological questions and analytical methods become increasingly sophisticated, there is a rapidly growing need for systems that can reliably and reproducibly separate cells and particles with high purity, throughput and recovery. Microfluidics technology represents a compelling approach in this regard, allowing precise control of separation forces for high performance separation in inexpensive, or even disposable, devices. In addition, microfluidics technology enables the fabrication of arrayed and integrated systems that operate either in parallel or in tandem, in a capacity that would be difficult to achieve in macro-scale systems. In this report, we use recent examples from our work to illustrate the potential of microfluidic cell- and particle-sorting devices. We demonstrate the potential of chip-based high-gradient magnetophoresis that enable high-purity separation through reversible trapping of target particles paired with high-stringency washing with minimal loss. We also describe our work in the development of devices that perform simultaneous multi-target sorting, either through precise control of magnetic and fluidic forces or through the integration of multiple actuation forces into a single monolithic device. We believe that such devices may serve as a powerful "front-end" module of highly integrated analytical platforms capable of providing actionable diagnostic information directly from crude, unprocessed samples - the success of such systems may hold the key to advancing point-of-care diagnostics and personalized medicine.

Aptamer-based microfluidic device for enrichment, sorting, and detection of multiple cancer cells

The ability to diagnose cancer based on the detection of rare cancer cells in blood or other bodily fluids is a significant challenge. To address this challenge, we have developed a microfluidic device that can simultaneously sort, enrich, and then detect multiple types of cancer cells from a complex sample. The device, which is made from poly(dimethylsiloxane) (PDMS), implements cell-affinity chromatography based on the selective cell-capture of immobilized DNA-aptamers and yields a 135-fold enrichment of rare cells in a single run. This enrichment is achieved because the height of the channel is on the order of a cell diameter. The sorted cells grow at the comparable rate as cultured cells and are 96% pure based on flow cytometry determination. Thus, by using our aptamer based device, cell capture is achieved simply and inexpensively, with no sample pretreatment before cell analysis. Enrichment and detection of multiple rare cancer cells can be used to detect cancers at the early stages, diagnose metastatic relapse, stratify patients for therapeutic purposes, monitor response to drugs and therapies, track tumor progression, and gain a deeper understanding of the biology of circulating tumor cells (CTCs).

Quadrupole magnetic sorting of porcine islets of Langerhans

Islet transplantation is emerging as a treatment option for selected patients with type 1 diabetes. Inconsistent isolation, purification, and recovery of large numbers of high-quality islets remain substantial impediments to progress in the field. Removing islets as soon as they are liberated from the pancreas during digestion and circumventing the need for density gradient purification is likely to result in substantially increased viable islet yields by minimizing exposure to proteolytic enzymes, reactive oxygen intermediates, and mechanical stress associated with centrifugation. This study capitalized on the hypervascularity of islets compared with acinar tissue to explore their preferential enrichment with magnetic beads to enable immediate separation in a magnetic field utilizing a quadrupole magnetic sorting. The results demonstrate that (1) preferential enrichment of porcine islets is achievable, but homogeneous bead distribution within the pancreas is difficult to achieve with current protocols; (2) greater than 70% of islets in the dissociated pancreatic tissue were recovered by quadrupole magnetic sorting, but their purity was low; and (3) infused islets purified by density gradients and subsequently passed through quadrupole magnetic sorting had similar potency as uninfused islets. These results demonstrate proof of concept and define the steps for implementation of this technology in pig and human islet isolation.

Optimization of an enrichment process for circulating tumor cells from the blood of head and neck cancer patients through depletion of normal cells

The optimization of a purely negative depletion, enrichment process for circulating tumor cells (CTCs) in the peripheral blood of head and neck cancer patients is presented. The enrichment process uses a red cell lysis step followed by immunomagnetic labeling, and subsequent depletion, of CD45 positive cells. A number of relevant variables are quantified, or attempted to be quantified, which control the performance of the enrichment process. Six different immunomagnetic labeling combinations were evaluated as well as the significant difference in performance with respect to the blood source: buffy coats purchased from the Red Cross, fresh, peripheral blood from normal donors, and fresh peripheral blood from human cancer patients. After optimization, the process is able to reduce the number of normal blood cells in a cancer patient's blood from 4.05 x 10(9) to 8.04 x 10(3) cells/mL and still recover, on average, 2.32 CTC per mL of blood. For all of the cancer patient blood samples tested in which CTC were detected (20 out of 26 patients) the average recovery of CTCs was 21.7 per mL of blood, with a range of 282 to 0.53 CTC. Since the initial number of CTC in a patient's blood is unknown, and most probably varies from patient to patient, the recovery of the CTC is unknown. However, spiking studies of a cancer cell line into normal blood, and subsequent enrichment using the optimized protocol indicated an average recovery of approximately 83%. Unlike a majority of other published studies, this study focused on quantifying as many factors as possible to facilitate both the optimization of the process as well as provide information for current and future performance comparisons. The authors are not aware any other reported study which has achieved the performance reported here (a 5.66 log(10)) in a purely negative enrichment mode of operation. Such a mode of operation of an enrichment process provides significant flexibility in that it has no bias with respect to what attributes define a CTC; thereby allowing the researcher or clinician to use any maker they choose to define whether the final, enrich product contains CTCs or other cell type relevant to the specific question (i.e., does the CTC have predominantly epithelial or mesenchymal characteristics?).

An optimized immunomagnetic bead-based negative selection protocol for CD4 T-cell isolation from mouse lymph nodes and spleen

This study describes an immunomagnetic bead-based methodology for optimal purification of mouse CD4+ T cells. It reproducibly yields highly pure CD4+ T cells from mouse lymph nodes (95-99%) and spleen (93-96%) with no residual antigen-presenting cell (APC) function in the purified population. The recovery of the starting CD4+ T-cell population is consistently high ( > 70%) and many samples can be simultaneously processed in a short period of time. The key factors responsible for improved purity are combinations of monoclonal antibodies that were found, through trial and error, to yield T cells of maximal purity achievable by non-flow sort-based negative selection. These cocktails efficiently target unwanted cell subsets with antibodies against multiple surface markers expressed by non-CD4+ T cells. Because immunomagnetic bead-based protocols do not require the expensive and cumbersome processes required by flow sort-based purification, the methodology described here should find widespread use.

2D modeling and preliminary in vitro investigation of a prototype high gradient magnetic separator for biomedical applications

High gradient magnetic separation (HGMS) of magnetic materials from fluids or waste products has many established industrial applications. However, there is currently no technology employing HGMS for ex-vivo biomedical applications, such as for the removal of magnetic drug- or toxin-loaded spheres from the human blood stream. Importantly, human HGMS applications require special design modifications as, in contrast to conventional use where magnetic elements are permanently imbedded within the separation chambers, medical separators need to avoid direct contact between the magnetic materials and blood to reduce the risk of blood clotting and to facilitate convenient and safe treatment access for many individuals. We describe and investigate the performance of a magnetic separator prototype designed for biomedical applications. First, the capture efficiency of a prototype HGMS separator unit consisting of a short tubing segment and two opposing magnetizable fine wires along the outside of the tubing was investigated using 2D mathematical modeling. Second, the first-pass effectiveness to remove commercially available, magnetic polystyrene spheres from human blood using a single separator unit was experimentally verified. The theoretical and experimental data correlated well at low flow velocities (<5.0 cm/s) and high external magnetic fields (>0.05 T). This prototype separator unit removed >90% in a single pass of the magnetic spheres from water at mean flow velocity < or =8.0 cm/s and from blood mimic fluids (ethylene glycol-water solutions) at mean flow velocity < or =2.0 cm/s. In summary, we describe and prove the feasibility of a HGMS separator for biomedical applications.

Continuous flow separations in microfluidic devices

Biochemical sample mixtures are commonly separated in batch processes, such as filtration, centrifugation, chromatography or electrophoresis. In recent years, however, many research groups have demonstrated continuous flow separation methods in microfluidic devices. Such separation methods are characterised by continuous injection, real-time monitoring, as well as continuous collection, which makes them ideal for combination with upstream and downstream applications. Importantly, in continuous flow separation the sample components are deflected from the main direction of flow, either by means of a force field (electric, magnetic, acoustic, optical etc.), or by intelligent positioning of obstacles in combination with laminar flow profiles. Sample components susceptible to deflection can be spatially separated. A large variety of methods has been reported, some of these are miniaturised versions of larger scale methods, others are only possible in microfluidic regimes. Researchers now have a diverse toolbox to choose from and it is likely that continuous flow methods will play an important role in future point-of-care or in-the-field analysis devices.

Blood progenitor cell separation from clinical leukapheresis product by magnetic nanoparticle binding and magnetophoresis

Positive selection of CD34+ blood progenitor cells from circulation has been reported to improve patient recovery in applications of autologous transplantation. Current magnetic separation methods rely on cell capture and release on solid supports rather than sorting from flowing suspensions, which limits the range of therapeutic applications and the process scale up. We tested CD34+ cell immunomagnetic labeling and isolation from fresh leukocyte fraction of peripheral blood (leukapheresis) using the continuous quadrupole magnetic flow sorter (QMS), consisting of a flow channel (SHOT, Greenville, IN) and a quadrupole magnet with a maximum field intensity (B(o)) of 1.42 T and a mean force field strength (S(m)) of 1.45 x 10(8) TA/m(2). Both the sample magnetophoretic mobility (m) and the inlet and outlet flow patterns highly affect the QMS performance. Seven commercial progenitor cell labeling reagent combinations were quantitatively evaluated by measuring magnetophoretic mobility of a high CD34 expression cell line, KG-1a, using the cell tracking velocimeter (CTV). The CD34 Progenitor Cell Isolation Kit (Miltenyi Biotec, Bergisch Gladbach, Germany) showed the strongest labeling of KG-1a cells and was selected for progenitor cell enrichment from 11 fresh and 11 cryopreserved clinical leukapheresis samples derived from different donors. The CD34+ cells were isolated with a purity of 60-96%, a recovery of 18-60%, an enrichment rate of 12-169, and a throughput of (1.7-9.3) x 10(4) cells/s. The results also showed a highly regular dependence of the QMS performance on the flow conditions that agreed with the theoretical predictions based on the CD34+ cell magnetophoretic mobility.

Preliminary studies of application of CdTe nanocrystals and dextran–Fe3O4 magnetic nanoparticles in sandwich immunoassay

BACKGROUND

The favorable properties of water-soluble CdTe nanocrystals as novel biological luminescent label over conventional fluorescent probes have attracted considerable interest. The magnetic separation technique has widely been applied to various aspects in biotechnology in recent years. In this paper, we made use of CdTe nanocrystals and dextran-Fe3O4 magnetic nanoparticles for fluorescence immunoassay.

METHODS

The CdTe nanocrystals and dextran-Fe3O4 magnetic nanoparticles were applied to immunoassay for the determination of human immunoglobulin G (HIgG). A rabbit anti-HIgG antibody (primary antibody) was immobilized on magnetic nanoparticles, which was used as a solid support. A sheep anti-HIgG antibody (secondary antibody) was attached to the surface of the CdTe nanocrystals via electrostatic interaction. The immunoassay was based on a sandwich immunoreaction of primary antibody on the magnetic nanoparticles, HIgG (or serum sample), and the secondary antibody labeled with CdTe nanocrystals.

RESULTS

The CdTe label was compared with a fluorescein isothiocyanate (FITC) label. The CdTe is an order of magnitude more sensitive than the FITC. The immunoassay method was applied to determining the HIgG in practical samples and the results obtained are in good agreement with those obtained by nephelometry.

CONCLUSION

This technique may be applied in many types of antibody-antigen system.

Droplet-based magnetically activated cell separation

In this study, we developed a method that target cells in suspension can be separated by combining magnetic force and gravitation force. Since the newly developed method involves a separating process of a droplet containing nontarget cells in suspension by applying magnetic force to separate target cells, we called it droplet-based magnetic activated cell sorting (dMACS). To demonstrate the efficiency of the dMACS system, Ter119 (+) cells from mouse bone marrow cells were separated by both conventional MACS and our dMACS systems. Effects of three parameters on separation efficiency were examined in the dMACS system. As a result, both volume of droplet of cell suspension, and magnetic force did not affect the efficiency of cell separation markedly. However, the time for cell settlement in the droplet showed a critical role in the efficiency of cell separation according to increasing time. Therefore, we tried to verify that the saturation time affected increase of its efficiency and that flow rate injected to get rid of the negative cell resulted in the decrease of its efficiency. Using this dMACS system, we were able to pinpoint that the flow rate of cell suspension injected into a magnetic platform results in disturbance in the droplet, leading to turbulence in the cell suspension.

Magnetic separation of micro-spheres from viscous biological fluids

A magnetically based detoxification system is being developed as a therapeutic tool for selective and rapid removal of biohazards, i.e. chemicals and radioactive substances, from human blood. One of the key components of this system is a portable magnetic separator capable of separating polymer-based magnetic nano/micro-spheres from arterial blood flow in an ex vivo unit. The magnetic separator consists of an array of alternating and parallel capillary tubing and magnetizable wires, which is exposed to an applied magnetic field created by two parallel permanent magnets such that the magnetic field is perpendicular to both the wires and the fluid flow. In this paper, the performance of this separator was evaluated via preliminary in vitro flow experiments using a separator unit consisting of single capillary glass tubing and two metal wires. Pure water, ethylene glycol-water solution (v:v=39:61 and v:v=49:51) and human whole blood were used as the fluids. The results showed that when the viscosity increased from 1.0 cp to 3.0 cp, the capture efficiency (CE) decreased from 90% to 56%. However, it is still feasible to obtain >90% CE in blood flow if the separator design is optimized to create higher magnetic gradients and magnetic fields in the separation area.

Application of immunomagnetic cell enrichment in combination with RT-PCR for the detection of rare circulating head and neck tumor cells in human peripheral blood

Detection of rare, circulating tumor cells (CTC's) in human peripheral blood is a potential indicator of prognosis and diagnosis in oncology. Typical methods to detect these CTC's are either by immunocytochemistry (ICCS) or RT-PCR. However without accurate, rapid, and reproducible enrichment processes, these detection techniques are labor intensive and/or unreliable. In this article, a repeatable enrichment process that included a flow-through immunomagnetic cell separation system, the quadrupole magnetic sorter (QMS) was optimized with the aid of a statistical analysis software package. The QMS was operated in a negative mode of operation by immunomagnetically targeting normal human peripheral blood lymphocytes (PBL) through the CD45 surface marker. Three head and neck squamous carcinoma cell lines (HNSCC), Detroit-562, SCC-4, and CAL-27, were used to determine the sensitivity of RT-PCR for the epidermal growth factor receptor (EGFR) in spiked PBL. The detection purity needed for detection was found to be one cell in 10(4), one cell in 10(3), and one cell in 10(5) for the Detroit-562, SCC-4, and CAL-27, respectively. The actual number of cancer cells needed for RT-PCR detection ranged from 30 to 1 cell. To mimic the potential concentration of rare CTC present in peripheral blood of cancer patients, the spiking concentration was chosen to be one cancer cell per 10(5) total leukocytes from healthy donors. Using a single step immunomagnetic labeling, the final, optimized enrichment process produced a 57.6 +/- 30.3-fold (n = 6) enrichment of the rare cancer cells with a final cancer cell recovery of (77.8 +/- 6.6)%.

Binding affinities/avidities of antibody-antigen interactions: quantification and scale-up implications

Bioaffinity interactions have been, and continue to be, successfully adapted from nature for use in separation and detection applications. It has been previously reported that the magnetophoretic mobility of labeled cells show a saturation type phenomenon as a function of the concentration of the free antibody-magnetic nanoparticle conjugate which is consistent with other reports of antibody-fluorophore binding. Starting with the standard antibody-antigen relationship, a model was developed which takes into consideration multi-valence interactions, and various attributes of flow cytometry (FCM) and cell tracking velocimetry (CTV) measurements to determine both the apparent dissociation constant and the antibody-binding capacity (ABC) of a cell. This model was then evaluated on peripheral blood lymphocytes (PBLs) labeled with anti CD3 antibodies conjugated to FITC, PE, or DM (magnetic nanoparticles). Reasonable agreements between the model and the experiments were obtained. In addition, estimates of the limitation of the number of magnetic nanoparticles that can bind to a cell as a result of steric hinderance was consistent with measured values of magnetophoretic mobility. Finally, a scale-up model was proposed and tested which predicts the amount of antibody conjugates needed to achieve a given level of saturation as the total number of cells reaches 10(10), the number of cells needed for certain clinical applications, such as T-cell depletions for mismatched bone marrow transplants.

Continuous sorting of magnetic cells via on-chip free-flow magnetophoresis

The ability to separate living cells is an essential aspect of cell research. Magnetic cell separation methods are among some of the most efficient methods for bulk cell separation. With the development of microfluidic platforms within the biotechnology sector, the design of miniaturised magnetic cell sorters is desirable. Here, we report the continuous sorting of cells loaded with magnetic nanoparticles in a microfluidic magnetic separation device. Cells were passed through a microfluidic chamber and were deflected from the direction of flow by means of a magnetic field. Two types of cells were studied, mouse macrophages and human ovarian cancer cells (HeLa cells). The deflection was dependent on the magnetic moment and size of the cells as well as on the applied flow rate. The experimentally observed deflection matched well with calculations. Furthermore, the separation of magnetic and non-magnetic cells was demonstrated using the same microfluidic device.

Comparison of two immunomagnetic separation technologies to deplete T cells from human blood samples

The objective of this study was to compare the performance of two immunomagnetic separation technologies to deplete T cells from buffy coats of human blood. Specifically, two versions of the commercial MACS(R) Technology: MiniMACS and SuperMACS, and a prototype, flow-through system, the QMS, were evaluated. Peripheral blood mononuclear leukocytes (PBL) were isolated from buffy coats and an immunomagnetic separation of CD3(+) cells was conducted using company and optimized labeling protocols. To mimic peripheral blood containing bone marrow purged hematopoietic stem cells, HSC, CD34 expressing-cells (KG1a) were spiked into PBL prior to T-cell depletion once optimized depletion conditions were determined. Once the labeling protocol was optimized, the MiniMACS system performed well by producing a highly enriched CD3(+) fraction, and a respectable level of depletion of T cells and recovery of KG1a cells in the depleted fraction; an average log(10) depletion of T cells of 2.88 +/- 0.17 and an average recovery of the KG1a cells of 60.8 +/- 5.94% (n = 14). The performance of the SuperMACS system was very similar with an average log(10) depletion of T cells of 2.89 +/- 0.22 and an average recovery of KG1a of 63.1 +/- 8.55% (n = 10). In contrast, the QMS system produced an average log(10) depletion of T cells of 3.98 +/- 0.33 (n = 16) with a corresponding average recovery of 57.9 +/- 16.6% of the spiked CD34+ cells. The aforementioned QMS performance values were obtained using sorting speeds ranging from 2.5 x 10(4) to 1.7 x 10(5) cells per second. It is suggested that the lack of a 100% recovery of the unlabeled KG1a cells is the result of a previously reported "drafting" phenomena which pulls unlabeled cells in the direction of the magnetically labeled cells thereby resulting in loss of the unlabeled cells.

Enrichment using antibody-coated microfluidic chambers in shear flow: model mixtures of human lymphocytes

Isolation of phenotypically-pure cell subpopulations from heterogeneous cell mixtures such as blood is a difficult yet fundamentally important task. Current techniques such as fluorescent activated cell sorting (FACS) and magnetic-activated cell sorting (MACS) require pre-incubation with antibodies which lead to processing times of at least 15-60 min. In this study, we explored the use of antibody-coated microfluidic chambers to negative deplete undesired cell types, thus obtaining an enriched cell subpopulation at the outlet. We used human lymphocyte cell lines, MOLT-3 and Raji, as a model system to examine the dynamic cell binding behavior on antibody coated surfaces under shear flow. Shear stress ranging between 0.75 and 1.0 dyn/cm2 was found to provide most efficient separation. Cell adhesion was shown to follow pseudo-first order kinetics, and an anti-CD19 coated (Raji-depletion) device with approximately 2.6 min residence time was demonstrated to produce 100% pure MOLT-3 cells from 50-50 MOLT-3/Raji mixture. We have developed a mathematical model of the separation device based on the experimentally determined kinetic parameters that can be extended to design future separation modules for other cell mixtures. We conclude that we can design microfluidic devices that exploits the kinetics of dynamic cell adhesion to antibody coated surfaces to provide enriched cell subpopulations within minutes of total processing time.

Establishment and implications of a characterization method for magnetic nanoparticle using cell tracking velocimetry and magnetic susceptibility modified solutions

Magnetic micro and nanoparticles conjugated to affinity labels have become a significant, commercial reagent. It has been demonstrated that the performance of cell separation systems using magnetic labels is a function of the magnitude of the magnetic force that can be generated through labeling. This magnetic force is proportional to the number of magnetic particles bound to the cell, the magnetic energy gradient, and the particle-field interaction parameter. This particle-field interaction parameter, which is the product of the relative volumetric, magnetic susceptibility and the volume of the micro or nanoparticle, is a fundamental parameter which can be used to characterize the magnetic particles. An experimental technique is presented which measures the volumetric magnetic susceptibility of particles through the use of susceptibility modified solutions and an experimental instrument, Cell Tracking Velocimetry, CTV. Experimental studies were conducted on polystyrene microspheres alone and those bound to four different magnetic nanoparticles. The experimentally determined values of the magnetic susceptibility of the polystyrene microspheres are consistent with values found from literature. Consequently, magnetic susceptibility measurements of these polystyrene microspheres bound with the magnetic nanoparticles combined with particle size measurements using commercial dynamic light scattering instrument allowed estimates of the particle-field interaction parameter to be made for four commercial, magnetic nanoparticles. The value found for MACS beads is close to what is reported from an independent study. The values for MACS beads and Imag beads are found to agree with what is observed from experiments. Finally, an experimental demonstration of the impact that differences in this field interaction parameter has on the labeling of human lymphocytes is presented.

Enrichment of rare cancer cells through depletion of normal cells using density and flow-through, immunomagnetic cell separation

OBJECTIVE

To develop a reliable technique to enrich for rare cells in blood suspensions using only negative selection steps including a flow-through immunomagnetic cell separations system and by optimizing variables normally encountered during such enrichment processes.

METHODS

A human breast cancer cell line was cultivated and spiked at a ratio of 1 cancer cell to 10(5) total leukocytes in buffy coat or 1 cancer cell to 10(8) total cells in whole blood samples. The final, optimized process consisted of: a red cell lysis step, immunomagnetically staining leukocytes with an anti-CD45 PE, anti- MACS sandwich, immunomagnetic sorting using a flow-through system (QMS), and a final cell analysis step using either an automated cell counter, filtration, and visual counting or a cytospin analysis.

RESULTS

The final, optimized process produced a final enrichment of the rare cancer cells of 5.17 log(10) and an average, final recovery of 46%. It should be noted that a negative depletion protocol was used (i.e., no labeling of the rare cancer cells was used).

CONCLUSIONS

To the authors' knowledge, no examples in the literature exist of a 5.17 log(10) enrichment of cancer cells in human blood using a negative depletion protocol. The closest example is a 4 log(10) enrichment in which two positive magnetic cell separation steps were used (none were used in this study). Ongoing studies are investigating further modifications of the precommercial, prototype flow-through immunmagnetic separation system to increase both the enrichment and recovery rate. However, even at current performance levels, the presented process could significantly improve visual and molecular analysis of rare cells in blood.

Migration Analysis of Micro-Particles in Liquids Using Microscopically Designed External Fields

The recent development of new migration methods of micro-particles in liquids using various external fields is reviewed. The combination of a laser scattering force and a photothermal effect produced photothermal-conversion laser-photophoresis. A dielectric field generated in a planer or a capillary quadrupole electrode realized dielectrophoresis. Using a micrometer-scaled magnetic field gradient, the "Magnetophoretic velocimetry" of micro-particles was invented. Furthermore, the Lorentz force generated by combining an electric field and a magnetic field was utilized for electromagnetophoresis. These new methods were overlooked and the advantages in analytical use were discussed.