Impacts of ionic strength on three-dimensional nanoparticle aggregate structure and consequences for environmental transport and deposition

A Critical Look at Colloid Generation, Stability, and Transport in Redox-Dynamic Environments: Challenges and Perspectives

Colloid generation, stability, and transport are important processes that can significantly influence the fate and transport of nutrients and contaminants in environmental systems. Here, we critically review the existing literature on colloids in redox-dynamic environments and summarize the current state of knowledge regarding the mechanisms of colloid generation and the chemical controls over colloidal behavior in such environments. We also identify critical gaps, such as the lack of universally accepted cross-discipline definition and modeling infrastructure that hamper an in-depth understanding of colloid generation, behavior, and transport potential. We propose to go beyond a size-based operational definition of colloids and consider the functional differences between colloids and dissolved species. We argue that to predict colloidal transport in redox-dynamic environments, more empirical data are needed to parametrize and validate models. We propose that colloids are critical components of element budgets in redox-dynamic systems and must urgently be considered in field as well as lab experiments and reactive transport models. We intend to bring further clarity and openness in reporting colloidal measurements and fate to improve consistency. Additionally, we suggest a methodological toolbox for examining impacts of redox dynamics on colloids in field and lab experiments.

Nanocrystalline iron hydroxide lignocellulose filters for arsenate remediation

Harmful levels of environmental contaminants, such as arsenic (As), persist readily in the environment, threatening safe drinking water supplies in many parts of the world. In this paper, we present a straightforward and cost-effective filtration technology for the removal of arsenate from potable water. Biocomposite filters comprised of nanocrystalline iron oxides or oxyhydroxides mineralized within lignocellulose scaffolds constitute a promising low cost, low-tech avenue for the removal of these contaminants. Two types of iron oxide mineral phases, 2-line ferrihydrite (Fh) and magnetite (Mt), were synthesized within highly porous balsa wood using an environmentally benign modification process and studied in view of their effective removal of As from contaminated water. The mineral deposition pattern, minerology, as well as crystallinity, were assessed using scanning electron microscopy, transmission electron microscopy, micro-computed X-ray tomography, confocal Raman microscopy, infrared spectroscopy, and X-ray powder diffraction. Our results indicate a preferential distribution of the Fh mineral phase within the micro-porous cell wall and radial parenchyma cells of rays, while Mt is formed primarily at the cell wall/lumen interface of vessels and fibers. Water samples of known As concentrations were subjected to composite filters in batch incubation and gravity-driven flow-through adsorption tests. Eluents were analyzed using microwave plasma optical emission spectroscopy (MP-AES) and inductively coupled plasma mass spectrometry (ICP-MS). By subjecting the filters to a flow of contaminated water, the time for As uptake was reduced to minutes rather than hours, while immobilizing the same amount of As. The retention of As within the composite filter was further confirmed through energy-dispersive X-ray mappings. Apart from addressing dangerously high levels of arsenate in potable water, these versatile iron oxide lignocellulosic filters harbor tremendous potential for addressing current and emerging environmental contaminants that are known to adsorb on iron oxide mineral phases, such as phosphate, polycyclic aromatic hydrocarbons or heavy metals.

Controlling plasmonic suprastructures through self-assembly of gold nanoparticles with hybrid copolymer-lipid vesicles

Hybrid lipid membranes incorporating amphiphilic copolymers have gained significant attention due to their potential applications in various fields, including drug delivery and sensing. By combining the properties of copolymers and lipid membranes, such as enhanced chemical tunability and stability, environmental responsiveness, and multidomain nature, novel membrane architectures have been proposed. In this study, we investigated the potentialities of hybrid membranes made of two distinct components: the rigid fully saturated phospholipid 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) and the soft copolymer poly(butadiene-b-ethyleneoxide) (PBD-b-PEO). The objective was to explore the interaction of citrate-coated gold nanoparticles (AuNPs) and the hybrid membrane, aiming at constructing AuNPs-hybrid vesicles suprastructures with controlled and adjustable plasmonic properties. A series of experimental techniques were employed to investigate hybrid free-standing and supported membranes. The results revealed that the incorporation of the copolymer into the lipid membrane promotes AuNPs clustering, demonstrating a distinctive aggregative phenomenon of citrate-coated AuNPs on multidomain membranes. Importantly, we show that the size and morphology of AuNPs clusters can be precisely controlled in non-homogeneous membranes, enabling the formation of hybrid suprastructures with controlled patch properties. These results highlight the potential of lipid-copolymer hybrid membranes for designing functional materials with tailored plasmonic properties, with potential applications in nanomedicine and sensing.

Co-transport of arsenic and micro/nano-plastics in saturated soil

Contaminants can co-exist and migrate together in the environment, causing complex (and sometimes unexpected) transport dynamics which challenge the efficient remediation of individual contaminants. The co-transport dynamics, however, remained obscure for some contaminants, such as arsenic and micro/nano-plastics (MNPs). To fill this knowledge gap, this study explored the co-transport dynamics of arsenic and MNP particles in saturated soil by combining laboratory experiments and stochastic model analysis. Isothermal adsorption and sand column transport experiments showed that the adsorption of arsenic by MNP particles followed the Freundlich model, with a maximum adsorption of 2.425 mg/g for the MNP particles with a diameter of 100 nm. In the presence of MNP particles, the efflux concentration of arsenic ions declined due to adsorption, where the decline rate decreased with the increasing MNP size and increased with the increasing adsorption capacity. Experimental results also showed that the 100 nm nano-plastic particles prohibited arsenic transport in saturated sand columns, while the 5 μm microplastics enhanced arsenic transport due to electrostatic adsorption and media pore plugging. A tempered time fractional advective-dispersion equation was then proposed to quantify the observed breakthrough curves of arsenic. The results showed that this model can reliably capture the co-transport behavior of arsenic with MNPs in the saturated soil with all coefficients of determination over 0.97, and particularly, the small MNP particles facilitated anomalous transport of arsenic. This study therefore improved the understanding and quantification of the co-transport of arsenic and MNPs in soil.

Co-transport of polystyrene microplastics and kaolinite colloids in goethite-coated quartz sand: Joint effects of heteropolymerization and surface charge modification

This study investigated the transport behavior of polystyrene microplastics (MPs) in saturated quartz sand and goethite-coated sand in the presence of coexisting kaolinite colloids. Column experiments were conducted under a wide range of solution chemistry conditions, including pH levels of 6.0, 7.0, and 9.0, as well as background Na⁺ concentrations of 5 mM and 25 mM. We found that: (1) The individual transport of MPs in porous media diminished both with increasing background ion strength and decreasing pH, and its transport ability was significantly dominated by the interactions between MPs and porous media rather than the interplay between MPs, which has been further corroborated by the aggregation stability experiments of MPs particles. (2) MPs had a much lower ability to move through goethite-coated sand columns than quartz sand columns. This is because goethite coating reduces the repulsion energy barriers between porous media and MPs. The increased specific surface area and surface complexity of sand columns after goethite coating should also account for this difference. (3) MPs transport would be subjected to the differentiated impact of co-transported kaolinite colloids in the two types of porous media. The promotion effect of kaolinite colloid on MPs' transport capacity is not significantly affected by background ionic strength changes when quartz sand is served as the porous medium; however, the promotion effect is highly correlated with the background ionic strength when goethite-coated sand is served as the porous medium. In comparison with low background ionic strength conditions, kaolinite colloids under high background ionic strength conditions significantly facilitated MPs transport. This is mainly because under high background ionic conditions, kaolinite colloids are more likely to be deposited on the surface of goethite-covered sand, competing with MPs for the limited deposition sites. The extended Derjaguin-Landau-Verwey-Overbeek (XDLVO) theory is applicable to describe the transport behavior of MPs.

Lead phosphate deposition in porous media and implications for lead remediation

Phosphate addition is commonly applied as an effective method to remediate lead contaminated sites via formation of low solubility lead phosphate solids. However, subsequent transport of the lead phosphate particles may impact the effectiveness of this remediation strategy. Hence, this study investigates the mechanisms involved in the aggregation of lead phosphate particles and their deposition in sand columns as a function of typical water chemistry parameters. Clean bed filtration theory was evaluated to predict the particle deposition behavior, using Derjaguin-Landau-Verwey-Overbeek (DLVO) theory to estimate particle-substrate interactions. The observed particle deposition was not predictable from the primary energy barrier in clean bed filtration models, even in simple monovalent background electrolyte (NaNO3), because weak deposition in a secondary energy minimum prevailed even at low ionic strength, and ripening occurred at ionic strengths of 12.5 mM or higher. For aged (aggregated) suspensions, straining also occurred at 12.5 mM or higher. Aggregation and deposition were further enhanced at low total P/Pb ratios (i.e., P/Pb = 1) and in the presence of divalent cations, such as Ca2+ (≥ 0.2 mM), which resulted in less negative particle surface potentials and weaker electrostatic repulsion forces. However, the presence of 5 mg C/L of humic acid induced strong steric or electrosteric repulsion, which hindered particle aggregation and deposition even in the presence of Ca2+. This study demonstrates the importance of myriad mechanisms in lead phosphate deposition and provides useful information for controlling water chemistry in phosphate applications for lead remediation.

Transport of nanoparticulate TiO2 UV-filters through a saturated sand column at environmentally relevant concentrations

The fate of sunscreen residues released during bathing activities around recreational areas is an emerging concern regarding the potential ecotoxicity of some of their ingredients, including nanoparticulate TiO₂ UV-filters. To assess the extent of contamination in the natural medium, sand-packed column experiments were carried out with bare TiO₂ engineered nanoparticles (ENPs) and two commercial nano-TiO₂ UV-filters coated with either SiO₂ (hydrophilic) or a combination of Al₂O₃ and simethicone (amphiphilic). The high sensitivity of (single particle)ICPMS online monitoring of the breakthrough curves made it possible to inject the ENPs at trace levels (2-100 μg L^-1) in eluents composed of 10^-3 and 10^-2 M NaCl and pHs of 5.7 and 7.8. The deposition of all ENPs in the sand increased with the ionic strength and decreased with the pH of the carrier. Both bare and SiO₂-coated ENPs showed a clear control by the electrostatic interactions between the particles and the quartz grains surfaces, in partial agreement with classical DLVO theory. Unexpectedly high rates of transfer were observed with the amphiphilic UV-filter, which could be explained by the addition of a contribution to the DLVO model to account for the steric repulsion between the sand collector and the polysiloxane surface layer of this ENP. These results demonstrate the major role played by the coating of UV-filters regarding their fate in porous media like soils, sediments and aquifers.

Cotransport of thallium(I) with polystyrene plastic particles in water-saturated porous media

Exploring the transport behaviors of thallium (Tl) in porous media is crucial for predicting Tl pollution in natural soils and groundwater. In recent years, the misuse of plastics has led to plastic becoming an emerging pollutant in soil. In this work, the effects of plastic particles on Tl(I) transport in water-saturated sand columns were investigated under different ionic strengths (ISs), pH values, and plastic particle sizes. The two-site nonequilibrium model was selected to fit the breakthrough curves (BTCs) of Tl(I). The results demonstrated that nanoplastics (NPs) accelerated Tl(I) transport at pH 7, which might be attributed to the competitive adsorption of NPs and Tl(I) on sand surfaces. However, at pH 5, the deposited NPs might provide more adsorption sites for Tl(I), and thus enhance its retention in the columns. In addition, the "straining" process could intercept microplastics (MPs) with Tl(I) that was attached under unfavorable attachment conditions, which would result in the inhibited mobility of Tl(I). On the other hand, the migration of plastics was restrained to some extent when Tl(I) was present. Overall, the findings from this work provided a new perspective for understanding the transport of Tl(I) and plastics in subsurface environments.

Enthralling the impact of engineered nanoparticles on soil microbiome: A concentric approach towards environmental risks and cogitation

Nanotechnology is an avant-garde field of scientific research that revolutionizes technological advancements in the present world. It is a cutting-edge scientific approach that has undoubtedly a plethora of functions in controlling environmental pollutants for the welfare of the ecosystem. However, their unprecedented utilization and hysterical release led to a huge threat to the soil microbiome. Nanoparticles(NPs) hamper physicochemical properties of soil along with microbial metabolic activities within rhizospheric soils.Here in this review shed light on concentric aspects of NP-biosynthesis, types, toxicity mechanisms, accumulation within the ecosystem. However, the accrual of tiny NPs into the soil system has dramatically influenced rhizospheric activities in terms of soil properties and biogeochemical cycles. We have focussed on mechanistic pathways engrossed by microbes to deal with NPs.Also, we have elaborated the fate and behavior of NPs within soils. Besides, a piece of very scarce information on NPs-toxicity towards environment and rhizosphere communities is available. Therefore, the present review highlights ecological perspectives of nanotechnology and solutions to such implications. We have comprehend certain strategies such as avant-garde engineering methods, sustainable procedures for NP synthesis along with vatious regulatory actions to manage NP within environment. Moreover, we have devised risk management sustainable and novel strategies to utilize it in a rationalized and integrated manner. With this background, we can develop a comprehensive plan about NPs with novel insights to understand the resistance and toxicity mechanisms of NPs towards microbes. Henceforth, the orientation towards these issues would enhance the understanding of researchers for proper recommendation and promotion of nanotechnology in an optimized and sustainable manner.

Zinc oxide nanoparticles: potential effects on soil properties, crop production, food processing, and food quality

The use of zinc oxide nanoparticles (ZnO NPs) is expected to increase soil fertility, crop productivity, and food quality. However, the potential effects of ZnO NP utilization should be deeply understood. This review highlights the behavior of ZnO NPs in soil and their interactions with the soil components. The review discusses the potential effects of ZnO NPs on plants and their mechanisms of action on plants and how these mechanisms are related to their physicochemical properties. The impact of current applications of ZnO NPs in the food industry is also discussed. Based on the literature reviewed, soil properties play a vital role in dispersing, aggregation, stability, bioavailability, and transport of ZnO NPs and their release into the soil. The transfer of ZnO NPs into the soil can affect the soil components, and subsequently, the structure of plants. The toxic effects of ZnO NPs on plants and microbes are caused by various mechanisms, mainly through the generation of reactive oxygen species, lysosomal destabilization, DNA damage, and the reduction of oxidative stress through direct penetration/liberation of Zn2+ ions in plant/microbe cells. The integration of ZnO NPs in food processing improves the properties of the relative ZnO NP-based nano-sensing, active packing, and food/feed bioactive ingredients delivery systems, leading to better food quality and safety. The unregulated/unsafe discharge concentrations of ZnO NPs into the soil, edible plant tissues, and processed foods raise environmental/safety concerns and adverse effects. Therefore, the safety issues related to ZnO NP applications in the soil, plants, and food are also discussed.

Fe(II) Redox Chemistry in the Environment

Iron (Fe) is the fourth most abundant element in the earth's crust and plays important roles in both biological and chemical processes. The redox reactivity of various Fe(II) forms has gained increasing attention over recent decades in the areas of (bio) geochemistry, environmental chemistry and engineering, and material sciences. The goal of this paper is to review these recent advances and the current state of knowledge of Fe(II) redox chemistry in the environment. Specifically, this comprehensive review focuses on the redox reactivity of four types of Fe(II) species including aqueous Fe(II), Fe(II) complexed with ligands, minerals bearing structural Fe(II), and sorbed Fe(II) on mineral oxide surfaces. The formation pathways, factors governing the reactivity, insights into potential mechanisms, reactivity comparison, and characterization techniques are discussed with reference to the most recent breakthroughs in this field where possible. We also cover the roles of these Fe(II) species in environmental applications of zerovalent iron, microbial processes, biogeochemical cycling of carbon and nutrients, and their abiotic oxidation related processes in natural and engineered systems.

Graphene oxide nanoparticles and hematite colloids behave oppositely in their co-transport in saturated porous media

Since iron oxide minerals are ubiquitous in natural environments, the release of graphene oxide (GO) into environmental ecosystems can potentially interact with iron oxide particles and thus alter their surface properties, resulting in the change of their transport behaviors in subsurface systems. Column experiments were performed in this study to investigate the co-transport of GO nanoparticles and hematite colloids (a model representative of iron oxides) in saturated sand. The results demonstrated that the presence of hematite inhibited GO transport in quartz sand columns due to the formation of less negatively charged GO-hematite heteroaggregates and additional deposition sites provided by the adsorbed hematite on sand surfaces. Contrarily, GO co-present in suspensions significantly enhanced the transport of hematite colloids through different mechanisms such as the increase of electrostatic repulsion, decreased physical straining, GO-facilitated transport of hematite (i.e., highly mobile GO nanoparticles served as a mobile carrier for hematite). We also found that the co-transport behaviors of GO and hematite depended on solution chemistry (e.g., pH, ionic strength, and divalent cation (i.e., Ca²⁺)), which affected the electrostatic interaction as well as heteroaggregation behaviors between GO nanoparticles and hematite colloids. The findings provide an insight into the potential fate of carbon nanomaterials affected by mineral colloids existing in natural waters and soils.

Different surface charged plastic particles have different cotransport behaviors with kaolinite ☆particles in porous media

The wide utilization of plastic related products leads to the ubiquitous presence of plastic particles in natural environments. Plastic particles could interact with kaolinite (one type of typical clay particles abundant in environments) and form plastic-kaolinite heteroaggregates. The fate and transport of both plastic particles and kaolinite particles thus might be altered. The cotransport and deposition behaviors of micron-sized plastic particles (MPs) with different surface charge (both negative and positive surface charge) with kaolinite in porous media in both 5 and 25 mM NaCl solutions were investigated in present study. Both types of MPs (negatively charged carboxylate-modified MPs (CMPs) and positively charged amine-modified MPs (AMPs)) formed heteroaggregates with kaolinite particles under both solution conditions examined, however, CMPs and AMPs exhibited different cotransport behaviors with kaolinite. Specifically, the transport of both CMPs and kaolinite was increased under both ionic strength conditions when kaolinite and CMPs were copresent in suspensions. While, when kaolinite and positively charged AMPs were copresent in suspensions, negligible transport of both kaolinite and AMPs were observed under examined salt solution conditions. The competition deposition sites by kaolinite (the portion suspending in solution) with CMPs-kaolinite heteroaggregates led to the increased transport both CMPs and kaolinite when both types of colloids were copresent. In contrast, the formation of larger sized AMPs-kaolinite heteroaggregates with surface charge heterogeneity led to the negligible transport of both kaolinite and AMPs when they were copresent in suspensions. The results of this study show that when plastic particles and kaolinite particles are copresent in natural environments, their interaction with each other will affect their transport behaviors in porous media. The alteration in the transport of MPs or kaolinite (either increased or decreased transport) is highly correlated with the surface charge of MPs.

Controls on Iron Reduction and Biomineralization over Broad Environmental Conditions as Suggested by the Firmicutes Orenia metallireducens Strain Z6

Microbial iron reduction is a ubiquitous biogeochemical process driven by diverse microorganisms in a variety of environments. However, it is often difficult to separate the biological from the geochemical controls on bioreduction of Fe(III) oxides. Here, we investigated the primary driving factor(s) that mediate secondary iron mineral formation over a broad range of environmental conditions using a single dissimilatory iron reducer, Orenia metallireducens strain Z6. A total of 17 distinct geochemical conditions were tested with differing pH (6.5-8.5), temperature (22-50 °C), salinity (2-20% NaCl), anions (phosphate and sulfate), electron shuttle (anthraquinone-2,6-disulfonate), and Fe(III) oxide mineralogy (ferrihydrite, lepidocrocite, goethite, hematite, and magnetite). The observed rates and extent of iron reduction differed significantly with k_int between 0.186 and 1.702 mmol L^-1 day^-1 and Fe(II) production ranging from 6.3% to 83.7% of the initial Fe(III). Using X-ray absorption and scattering techniques (EXAFS and XRD), we identified and assessed the relationship between secondary minerals and the specific environmental conditions. It was inferred that the observed bifurcation of the mineralization pathways may be mediated by differing extents of Fe(II) sorption on the remaining Fe(III) minerals. These results expand our understanding of the controls on biomineralization during microbial iron reduction and aid the development of practical applications.

Benefits at the nanoscale: a review of nanoparticle-enabled processes favouring microbial growth and functionality

Nanoparticles are ubiquitous and co-occur with microbial life in every environment on Earth. Interactions between microbes and nanoparticles impact the biogeochemical cycles via accelerating various reaction rates and enabling biological processes at the smallest scales. Distinct from microbe-mineral interactions at large, microbe-nanoparticle interactions may involve higher levels of active recognition and utilization of the reactive, changeable, and thereby 'moldable' nano-sized inorganic phases by microbes, which has been given minimal attention in previous reviews. Here we have compiled the various cases of microbe-nanoparticle interactions with clear and potential benefits to the microbial cells and communities. Specifically, we discussed (i) the high bioavailabilities of nanoparticles due to increased specific surface areas and size-dependent solubility, with a focus on environmentally-relevant iron(III) (oxyhydr)oxides and pyrite, (ii) microbial utilization of nanoparticles as 'nano-tools' for electron transfer, chemotaxis, and storage units, and (iii) speculated benefits of precipitating 'moldable' nanoparticles in extracellular biomineralization. We further discussed emergent questions concerning cellular level responses to nanoparticle-associated cues, and the factors that affect nanoparticles' bioavailabilities beyond size-dependent effects. We end the review by proposing a framework towards more quantitative approaches and by highlighting promising techniques to guide future research in this exciting field.

Morphology of Shear-Induced Colloidal Aggregates in Porous Media: Consequences for Transport, Deposition, and Re-entrainment

Colloid deposition in granular media is relevant to numerous environmental problems. Classic filtration models assume a homogeneous pore space and largely ignore colloid aggregation. However, substantial evidence exists on the ubiquity of aggregation within porous media, suggesting that deposition is enhanced by it. This work studies the deposition process in relation to aggregate size and structure. We demonstrate that aggregation is induced at typical groundwater velocities by comparing the repulsive DLVO force between particle pairs to the hydrodynamic shear force opposing it. Column experiments imaged with high-resolution X-ray computed tomography are used to measure aggregate structure and describe their morphology probability distribution and spatial distribution. Aggregate volume and surface area are found to be power-law distributed, while Feret diameter is exponentially distributed with some flow rate dependencies caused by erosion and restructuring by the fluid shear. Furthermore, size and shape of aggregates are heterogeneous in depth, where a small number of large aggregates control the concentration versus depth profile shape. The range of aggregate fractal dimensions found (2.22-2.42) implies a high potential for restructuring or breaking during transport. Shear-induced aggregation is not currently considered in macroscopic models for particle filtration, yet is critical to consider in the processes that control deposition.

Influence of titanium dioxide nanoparticles on the transport and deposition of microplastics in quartz sand

The influence of titanium dioxide nanoparticles (nTiO₂) on the transport and deposition of polystyrene microplastics (MPs) in saturated quartz sand was investigated in NaCl solutions with ionic strengths from 0.1 to 10 mM at two pH conditions (pH 5 and 7). Three different-sized polystyrene (PS) MPs (diameter of 0.2, 1, and 2 μm) were concerned in present study. We found that for all three different-sized MPs in NaCl solutions (0.1, 1 and 10 mM) at both pH 5 and 7, lower breakthrough curves and higher retained profiles of MPs with nTiO₂ copresent in suspensions relative to those without nTiO₂ were obtained, demonstrating that the copresence of nTiO₂ in MPs suspensions decreased MPs transport and increased their deposition in quartz sand under all examined conditions. The mechanisms contributing to the increased MPs deposition with nTiO₂ in suspensions at two pH conditions were different. The formation of MPs-nTiO₂ heteroaggregates and additional deposition sites provided by previously deposited nTiO₂ were found to drive to the increased MPs deposition with nTiO₂ in suspensions at pH 5, while the formation of MPs-nTiO₂ aggregates, additional deposition sites and increased surface roughness induced by the pre-deposited nTiO₂ on quartz sand surfaces were responsible for the enhanced MPs deposition at pH 7. The results give insights to predict the fate and transport of different-sized MPs in porous media in the copresence of engineered nanoparticles.

Elucidating the Role of Sulfide on the Stability of Ferrihydrite Colloids under Anoxic Conditions

While the reaction mechanisms between ferrihydrite and sulfide are well-documented, the role of redox reactions on the particle-particle stability of ferrihydrite colloids is largely overlooked. Such reactions are critical for a number of (bio)geochemical processes governing ferrihydrite-based colloid processing and their associated role in nutrient and contaminant subsurface dynamics. Taking a fundamental colloid chemistry approach, along with a complementary suite of characterization techniques, here, we explore the stability mechanisms of ferrihydrite colloids over a wide range of environmentally relevant sulfide concentrations at pH 6.0. Results show that sulfide lowered the stability of both ferrihydrite colloids in a concentration-dependent fashion. At lower sulfide concentrations (15.6-62.5 μM), ferrihydrite colloids are apparently stable, but their critical coagulation concentration (CCC) in NaCl linearly decreases with increasing sulfide concentration. This is attributed to the formation of negatively charged elemental sulfur (S(0)) nanoparticles on the surfaces of positively charged ferrihydrite, intensifying the electrostatic attractions between oppositely charged regions on adjacent ferrihydrite surfaces. Further increasing sulfide concentration generates more S(0) attaching to the ferrihydrite surface. This results in effective surface charge neutralization and then subsequent charge reversal, leading to extensive aggregation of ferrihydrite (core) colloids. Interestingly, for the ferrihydrite colloids with higher hydrodynamic diameter, aggregation rates linearly decreases with increasing sulfide concentration from 156.3 to 312.5 μM, which is likely due to the formation of substantial amounts of negatively charged S(0) and FeS. Findings highlight the significance of sulfidation products in controlling the stability of ferrihydrite colloids in sulfidic environments.

Cotransport and Deposition of Iron Oxides with Different-Sized Plastic Particles in Saturated Quartz Sand

The present study was designed to investigate the cotransport and deposition of different-sized plastic particle from nano- (0.02 μm) to micrometer-scale (0.2 and 2 μm) with goethite and hematite (two types of representative iron oxides abundant in natural environment) in porous media at both low (5 mM) and high ionic strength (25 mM) in NaCl solutions. We found that through different mechanisms (i.e., modification of surface properties of iron oxides, steric repulsion, or alteration in deposition sites on quartz sand), different-sized plastic particles induced different effects on the transport and deposition behaviors of iron oxides in quartz sand. Likewise, via different mechanisms such as change of surface properties or alteration in deposition sites on quartz sand, different transport behaviors for different sized plastic particles induced by the copresence of iron oxides were also observed. The results of this study suggested that cotransport of iron oxides and plastic particles in porous media is far more complex than those of individual colloid transport. Since both plastic particles and iron oxides are ubiquitous presence in natural environment, it is expected that they would interact with each other and thus alter the surface properties, leading to the change of transport behaviors in porous media.

Impact of Solution Chemistry and Particle Anisotropy on the Collective Dynamics of Oriented Aggregation

Although oriented aggregation of particles is a widely recognized mechanism of crystal growth, the impact of many fundamental parameters, such as crystallographically distinct interfacial structures, solution composition, and nanoparticle morphology, on the governing mechanisms and assembly kinetics are largely unexplored. Thus, the collective dynamics of systems exhibiting OA has not been predicted. In this context, we investigated the structure and dynamics of boehmite aggregation as a function of solution pH and ionic strength. Cryogenic transmission electron microscopy shows that boehmite nanoplatelets assemble by oriented attachment on (010) planes. The coagulation rate constants obtained from dynamic light scattering during the early stages of aggregation span 7 orders of magnitude and cross both the reaction-limited and diffusion-limited regimes. Combining a simple scaling analysis with calculations for stability ratios and rotational/translational diffusivities of irregular particle shapes, the effects of orientation for irregular-shaped particles on the early stages of aggregation are understood via angular dependencies of van der Waals, electrostatic, and hydrodynamic interactions. Using Monte Carlo simulations, we found that a simple geometric parameter, namely, the contact area between two attaching nanoplatelets, presents a useful tool for correlating nanoparticle morphologies to the emerging larger-scale aggregates, hence explaining the unusually high fractal dimensions measured for boehmite aggregates. Our findings on nanocrystal transport and interactions provide insights toward the predictive understanding of nanoparticle growth, assembly, and aggregation, which will address critical challenges in developing synthesis strategies for nanostructured materials, understanding the evolution of geochemical reservoirs, and addressing many environmental problems.

Multifunctional smart hydrogels: potential in tissue engineering and cancer therapy

In recent years, clinical applications have been proposed for various hydrogel products. Hydrogels can be derived from animal tissues, plant extracts and/or adipose tissue extracellular matrices; each type of hydrogel presents significantly different functional properties and may be used for many different applications, including medical therapies, environmental pollution treatments, and industrial materials. Due to complicated preparation techniques and the complexities associated with the selection of suitable materials, the applications of many host-guest supramolecular polymeric hydrogels are limited. Thus, improvements in the design and construction of smart materials are highly desirable in order to increase the lifetimes of functional materials. Here, we summarize different functional hydrogels and their varied preparation methods and source materials. The multifunctional properties of hydrogels, particularly their unique ability to adapt to certain environmental stimuli, are chiefly based on the incorporation of smart materials. Smart materials may be temperature sensitive, pH sensitive, pH/temperature dual sensitive, photoresponsive or salt responsive and may be used for hydrogel wound repair, hydrogel bone repair, hydrogel drug delivery, cancer therapy, and so on. This review focuses on the recent development of smart hydrogels for tissue engineering applications and describes some of the latest advances in using smart materials to create hydrogels for cancer therapy.

Roles of different types of oxalate surface complexes in dissolution process of ferrihydrite aggregates

The dissolution of ferrihydrite induced by low molar mass (LMM) organics is an important process that provides bioavailable iron for organisms. Here, ATR-FTIR analysis was combined with characterization of ferrihydrite nanoparticles and kinetic modeling to investigate the roles of different oxalate surface complex species in the dissolution of ferrihydrite aggregates. ATR-FTIR results revealed that at least four different species were present at or near the ferrihydrite surface in the process of ferrihydrite aggregate dissolution. At a relatively low addition of oxalate (oxalate/Fe < 0.1), oxalate was dominantly present as binuclear bidentate surface complexes and aqueous species. The binuclear bidentate complexes mainly caused electrostatic repulsion between particles, resulting in the disaggregation of large ferrihydrite aggregates into colloidal particles with hydrodynamic diameters of 116-174 nm. Kinetic modeling showed that these colloidal particles were stable at the oxalate/Fe ratio of 0.1. With increasing addition of oxalate (oxalate/Fe ≥ 0.1), mononuclear bidentate oxalate complexes and hydrogen-bonded surface complex replaced the binuclear bidentate complexes and aqueous species. The aggregates or larger colloidal particles were further disaggregated into smaller colloidal particles with hydrodynamic diameters of 35-64 nm. Additionally, the mononuclear bidentate oxalate complexes promoted the dissolution of ferrihydrite colloids into dissolved Fe.

Liquid-Phase Transmission Electron Microscopy for Studying Colloidal Inorganic Nanoparticles

For the past few decades, nanoparticles of various sizes, shapes, and compositions have been synthesized and utilized in many different applications. However, due to a lack of analytical tools that can characterize structural changes at the nanoscale level, many of their growth and transformation processes are not yet well understood. The recently developed technique of liquid-phase transmission electron microscopy (TEM) has gained much attention as a new tool to directly observe chemical reactions that occur in solution. Due to its high spatial and temporal resolution, this technique is widely employed to reveal fundamental mechanisms of nanoparticle growth and transformation. Here, the technical developments for liquid-phase TEM together with their application to the study of solution-phase nanoparticle chemistry are summarized. Two types of liquid cells that can be used in the high-vacuum conditions required by TEM are discussed, followed by recent in situ TEM studies of chemical reactions of colloidal nanoparticles. New findings on the growth mechanism, transformation, and motion of nanoparticles are subsequently discussed in detail.

Effect of reduced humic acid on the transport of ferrihydrite nanoparticles under anoxic conditions

Humic acid (HA) occurs ubiquitously in the subsurface environments and is well-known to play a critical role in the fate and transport of ferrihydrite nanoparticles (NPs) and NPs-associated contaminants. Under anoxic conditions, HA can readily be reduced by microorganisms or geochemical reducing species, and the mechanisms and kinetics of ferrihydrite reduction by reduced HA (HA_red) are well-documented; however, the role of these redox reactions on the transport of ferrihydrite NPs is largely underestimated. This study provides new knowledge regarding the role of HA (both reduced HA (HA_red) and oxidized HA (HA_ox)) of environmentally relevant concentrations (0-50 mg C/L) on the transport of ferrihydrite NPs in anoxic sand columns. Our findings show that, regardless of the redox state, the presence of a low concentration of HA (3 mg C/L) inhibited ferrihydrite NP's transport due to enhanced aggregation (and deposition) between positively charged ferrihydrite NPs and negatively charged HA molecules. In contrast, higher HA (both HA_red and HA_ox) concentration (≥10 mg C/L) significantly enhanced the mobility of ferrihydrite NPs, primarily due to the enhanced electrostatic and steric stabilization originating from excessively adsorbed HA molecules. Interestingly, the transport of ferrihydrite NPs is substantially lower in the presence of HA_red than in the presence of HA_ox. This distinct effect (HA_red vs. HA_ox) on the particle transport is attributed to the fact that reductive dissolution of ferrihydrite NPs occurs in the presence of HA_red (ferrihydrite dissolves and thus total breakthrough decreases), but not in the presence of HA_ox. Furthermore, the abatement extent of ferrihydrite NPs transport triggered by the presence of HA_red is dependent on dissolved HA_red concentration. Taken together, our findings provide direct, and much needed insights into the distinct roles of redox state of HA on the transport of redox-sensitive metal-bearing NPs in porous media.

Environmental implications and applications of engineered nanoscale magnetite and its hybrid nanocomposites: A review of recent literature

This review focuses on environmental implications and applications of engineered magnetite (Fe3O4) nanoparticles (MNPs) as a single phase or a component of a hybrid nanocomposite that exhibits superparamagnetism and high surface area. MNPs are synthesized via co-precipitation, thermal decomposition and combustion, hydrothermal process, emulsion, microbial process, and green approaches. Aggregation/sedimentation and transport of MNPs depend on surface charge of MNPs and geochemical parameters such as pH, ionic strength, and organic matter. MNPs generally have low toxicity to humans and ecosystem. MNPs are used for constructing chemical/biosensors and for catalyzing a variety of chemical reactions. MNPs are used for air cleanup and carbon sequestration. MNP nanocomposites are designed as antimicrobial agents for water disinfection and flocculants for water treatment. Conjugated MNPs are widely used for adsorptive/separative removal of organics, dyes, oil, arsenic, phosphate, molybdate, fluoride, selenium, Cr(VI), heavy metal cations, radionuclides, and rare earth elements. MNPs can degrade organic/inorganic contaminants via chemical reduction or catalyze chemical oxidation in water, sediment, and soil. Future studies should further explore mechanisms of MNP interactions with other nanomaterials and contaminants, economic and green approaches of MNP synthesis, and field scale demonstration of MNP utilization.

Impact of Redox Reactions on Colloid Transport in Saturated Porous Media: An Example of Ferrihydrite Colloids Transport in the Presence of Sulfide

Transport of colloids in the subsurface is an important environmental process with most research interests centered on the transport in chemically stable conditions. While colloids can be formed under dynamic redox conditions, the impact of redox reactions on their transport is largely overlooked. Taking the redox reactions between ferrihydrite colloids and sulfide as an example, we investigated how and to what extent the redox reactions modulated the transport of ferrihydrite colloids in anoxic sand columns over a range of environmentally relevant conditions. Our results reveal that the presence of sulfide (7.8-46.9 μM) significantly decreased the breakthrough of ferrihydrite colloids in the sand column. The estimated travel distance of ferrihydrite colloids in the absence of sulfide was nearly 7-fold larger than that in the presence of 46.9 μM sulfide. The reduced breakthrough was primarily attributed to the reductive dissolution of ferrihydrite colloids by sulfide in parallel with formation of elemental sulfur (S(0)) particles from sulfide oxidation. Reductive dissolution decreased the total mass of ferrihydrite colloids, while the negatively charged S(0) decreased the overall zeta potential of ferrihydrite colloids by attaching onto their surfaces and thus enhanced their retention in the sand. Our findings provide novel insights into the critical role of redox reactions on the transport of redox-sensitive colloids in saturated porous media.

Ferrihydrite Formation: The Role of Fe13 Keggin Clusters

Ferrihydrite is the most common iron oxyhydroxide found in soil and is a key sequester of contaminants in the environment. Ferrihydrite formation is also a common component of many treatment processes for cleanup of industrial effluents. Here we characterize ferrihydrite formation during the titration of an acidic ferric nitrate solution with NaOH. In situ SAXS measurements supported by ex situ TEM indicate that initially Fe13 Keggin clusters (radius ∼ 0.45 nm) form in solution at pH 0.12-1.5 and are persistent for at least 18 days. The Fe13 clusters begin to aggregate above ∼ pH 1, initially forming highly linear structures. Above pH ∼ 2 densification of the aggregates occurs in conjunction with precipitation of low molecular weight Fe(III) species (e.g., monomers, dimers) to form mass fractal aggregates of ferrihydrite nanoparticles (∼3 nm) in which the Fe13 Keggin motif is preserved. SAXS analysis indicates the ferrihydrite particles have a core-shell structure consisting of a Keggin center surrounded by a Fe-depleted shell, supporting the surface depleted model of ferrihydrite. Overall, we present the first direct evidence for the role of Fe13 clusters in the pathway of ferrihydrite formation during base hydrolysis, showing clear structural continuity from isolated Fe13 Keggins to the ferrihydrite particle structure. The results have direct relevance to the fundamental understanding of ferrihydrite formation in environmental, engineered, and industrial processes.

In Situ Observation of Hematite Nanoparticle Aggregates Using Liquid Cell Transmission Electron Microscopy

Aggregation of nanoparticles impacts their reactivity, stability, transport, and fate in aqueous environments, but limited methods are available to characterize structural features and movement of aggregates in liquid. Here, liquid cell transmission electron microscopy (LCTEM) was utilized to directly observe the size, morphology, and motion of aggregates that were composed of 9 and 36 nm hematite nanoparticles, respectively, in water or NaCl solution. When mass concentrations were same, the aggregates of 9 nm nanoparticles were statistically more compact and slightly larger than those of 36 nm nanoparticles. Aggregates in both samples were typically nonspherical. Increasing ionic strength resulted in larger aggregates, and also enhanced the stability of aggregates under electron-beam irradiation. In water, small aggregates moved randomly and approached repeatedly to large aggregates before final attachment. In NaCl solution, small aggregates moved directly toward large aggregates and attached to the latter quickly. This observation provided a direct confirmation of the DLVO theory that the energy barrier to aggregation is higher in water than in salt solutions. This study not only presented the influences of particle size and ionic strength on aggregation state, but also demonstrated that LCTEM is a promising method to link aggregation state to dynamic processes of nanoparticles.

Cation-Dependent Hierarchical Assembly of U60 Nanoclusters into Macro-Ion Assemblies Imaged via Cryogenic Transmission Electron Microscopy

Self-assembly of ([UO2(O2)OH]60)(60-) (U60), an actinide polyoxometalate with fullerene topology, can be induced by the addition of mono- and divalent cations to aqueous U60 solutions. Dynamic light scattering and small-angle X-ray scattering lend important insights into assembly in this system, but direct imaging of U60 and its assemblies via transmission electron microscopy (TEM) has remained an elusive goal. In this work, we used cryogenic TEM to image U60 and secondary and tertiary assemblies of U60 to characterize the size, morphology, and rate of formation of the secondary and tertiary structures. The kinetics and final morphologies of the secondary and tertiary structures strongly depend on the cation employed, with monovalent cations (Na(+) and K(+)) leading to the highest rates and largest secondary and tertiary structures.

Colloid Deposit Morphology and Clogging in Porous Media: Fundamental Insights Through Investigation of Deposit Fractal Dimension

Experiments reveal a wide discrepancy between the permeability of porous media containing colloid deposits and the available predictive equations. Evidence suggests that this discrepancy results, in part, from the predictive equations failing to account for colloid deposit morphology. This article reports a series of experiments using static light scattering (SLS) to characterize colloid deposit morphology within refractive index matched (RIM) porous media during flow through a column. Real time measurements of permeability, specific deposit, deposit fractal dimension, and deposit radius of gyration, at different vertical positions, were conducted with initially clean porous media at various ionic strengths and fluid velocities. Decreased permeability (i.e., increased clogging) corresponded with higher specific deposit, lower fractal dimension, and smaller radius of gyration. During deposition, fractal dimension, radius of gyration, and permeability decreased with increasing specific deposit. During flushing with colloid-free fluid, these trends reversed, with increased fractal dimension, radius of gyration, and permeability. These observations suggest a deposition scenario in which large and uniform aggregates become deposits, which reduce porosity, lead to higher fluid shear forces, which then decompose the deposits, filling the pore space with small and dendritic fragments of aggregate.

Salt-Responsive Polysulfabetaines from Acrylate and Acrylamide Precursors: Robust Stabilization of Metal Nanoparticles in Hyposalinity and Hypersalinity

Metal nanoparticles (MNps) tend to be influenced by environmental factors such as pH, ionic strength, and temperature, thereby leading to aggregation. Forming stable aqueous dispersions could be one way of addressing the environmental toxicity of MNps. In contrast to the electrolyte-induced aggregation of MNps, novel zwitterionic sulfabetaine polymers reported here act as stabilizers of MNps even under high salinity. Polysulfabetaines exhibited unique solubility and swelling tendencies in brine and deionized water, respectively. The polysulfabetaines derived from methacrylate (PSBMA) and methacrylamide (PSBMAm) also showed reversible salt-responsive and thermoresponsive behaviors as confirmed by cloud-point titration, transmittance, and dynamic light scattering studies. The brine soluble nature was explored for its ability to be used as a capping agents to form metal nanoparticles using formic acid as a reducing agent. Thus, silver and noble metal (gold and palladium) nanoparticles were synthesized. The nanoparticles formed were characterized by UV-vis, XRD, TEM, EDX, and DLS studies. The size of the nanoparticles remained more or less the same even after 2 months of storage in 2 M sodium chloride solution under ambient conditions and also at elevated temperatures as confirmed by light-scattering measurements. The tunable, stimuli-responsive polysulfabetaine-capped stable MNp formed under low (hyposalinity) and hypersalinity could find potential applications in a variety of areas.