Poly(trehalose): sugar-coated nanocomplexes promote stabilization and effective polyplex-mediated siRNA delivery

Trehalose-polyamine/DNA nanocomplexes: impact of vector architecture on cell and organ transfection selectivity

A novel family of precision-engineered gene vectors with well-defined structures built on trehalose and trehalose-based macrocycles (cyclotrehalans) comprising linear or cyclic polyamine heads have been synthesized through procedures that exploit click chemistry reactions. The strategy was conceived to enable systematic structural variations and, at the same time, ensuring that enantiomerically pure vectors are obtained. Notably, changes in the molecular architecture translated into topological differences at the nanoscale upon co-assembly with plasmid DNA, especially regarding the presence of regions with short- or long-range internal order as observed by TEM. In vitro and in vivo experiments further evidenced a significant impact on cell and organ transfection selectivity. Altogether, the results highlight the potential of trehalose-polyamine/pDNA nanocomplex monoformulations to achieve targeting transfection without the need for any additional cell- or organ-sorting component.

Collagen-Binding Nanoparticles for Paclitaxel Encapsulation and Breast Cancer Treatment

In this study, we developed a novel hybrid collagen-binding nanocarrier for potential intraductal administration and local breast cancer treatment. The particles were formed by the encapsulation of nanostructured lipid carriers (NLCs) containing the cytotoxic drug paclitaxel within a shell of poly(N-isopropylacrylamide) (pNIPAM), and were functionalized with SILY, a peptide that binds to collagen type I (which is overexpressed in the mammary tumor microenvironment) to improve local retention and selectivity. The encapsulation of the NLCs in the pNIPAM shell increased nanoparticle size by approximately 140 nm, and after purification, a homogeneous system of hybrid nanoparticles (∼96%) was obtained. The nanoparticles exhibited high loading efficiency (<76%) and were capable of prolonging paclitaxel release for up to 120 h. SILY-modified nanoparticles showed the ability to bind to collagen-coated surfaces and naturally elaborated collagen. Hybrid nanoparticles presented cytotoxicity up to 3.7-fold higher than pNIPAM-only nanoparticles on mammary tumor cells cultured in monolayers. In spheroids, the increase in cytotoxicity was up to 1.8-fold. Compared to lipid nanoparticles, the hybrid nanoparticle modified with SILY increased the viability of nontumor breast cells by up to 1.59-fold in a coculture model, suggesting the effectiveness and safety of the system.

Cationic amino-acid functionalized polymethacrylamide vectors for siRNA transfection based on modification of poly(2-isopropenyl-2-oxazoline)

Poly(2-isopropenyl-2-oxazoline) (PiPOx) is a functional polymer showing great potential for the development of smart biomaterials. The straightforward synthesis and post-polymerization functionalization of PiPOx offers many opportunities for tailoring the properties of the polymer towards biomaterials. In this study we report for the first time PiPOx-based cationic charged polymethacrylamides with amino acid side chains that can complex siRNA and promote transfection in vitro. Therefore, PiPOx was fully modified via ring opening addition reactions with the carboxylic acid groups of a series of N-Boc-L-amino acids and their reaction kinetics were investigated. Based on the determined kinetic constants, another series of PiPOx-based copolymers with balanced hydrophilic/hydrophobic content of N-Boc-L-amino acids were obtained via one-pot modification reaction with two different N-Boc-L-amino acids. The N-Boc protected homopolymers and related copolymers were deprotected to obtain (co)polymers with the targeted side chain cationic charged units. The (co)polymers' structures were fully investigated via FT-IR and 1H NMR spectroscopy, size exclusion chromatography (SEC), and TGA-DSC-MS analysis. The polarimetry measurements revealed that the homopolymers retain their chiroptical properties after post-modification, and a sign inversion is noticed from (L) N-Boc-protected analogues to (D) for the TFA cationic charged homopolymers. Generally, cationically charged homopolymers with hydrophilic amino acids on the side chain showed efficient complexation of siRNA, but poor transfection while cationic copolymers having both tryptophan and valine or proline side chains revealed moderate siRNA binding, high transfection efficiency (> 90% of the cells) and potent gene silencing with IC50 values down to 5.5 nM. Particularly, these cationic copolymers showed higher gene silencing potency as compared to the commercial JetPRIME® reference, without reducing cell viability in the concentration range used for transfection, making this a very interesting system for in vitro siRNA transfection.

Potent gene delivery from fluorinated poly(β-amino ester) in adhesive and suspension difficult-to-transfect cells for apoptosis and ferroptosis

Tremendous efforts have been made to improve polymeric property in gene delivery performances, especially when obstacle of transferring gene construct into difficult-to-transfect cells occurs. Innovations in the area of fluorination and fluorinated compounds with biomedical potential in medicinal chemistry are believed to assist in the development of new therapeutics. Fluorine modified polymers have shown to navigate the gene transfection cellular barriers and promoted the transfection outcomes. Gene transfer into some liver cancer cells and human leukemia cells has always been a challenge. Here, by facile incorporation of a fluorine containing amine monomer, 1H,1H-undecafluorohexylamine, fluorinated poly(β-amino ester) (FPAE) was synthesized to significantly improve the transfection performance, achieving high transfection efficiency of 87% and 55% in two representative difficult-to-transfect cells, HepG2 and Molt-4, which were cultured in adhesive and suspension condition, respectively. However, the potency of Lipofectamine 3000 was very limited. More importantly, functional studies revealed that FPAE can dramatically outperform Lipofectamine 3000 in delivering Bcl-xL and PKCβII to either provide the protection against apoptosis or promote the ferroptosis in HepG2 cells. This work facilitates gene therapies by overcoming biological barriers for targeting difficult-to-transfect cells and disease models when medically necessary.

Propranolol-Loaded Trehalosome as Antiproliferative Agent for Treating Skin Cancer: Optimization, Cytotoxicity, and In Silico Studies

This study aims at preparing propranolol-loaded trehalosomes (a trehalose-coated liposome) to be used as an antiproliferative agent for treating skin cancer. A factorial design was used to select the optimum formula, where trehalose, lecithin, and Tween 80 levels were studied. A total of 24 runs were prepared and characterized according to size, charge, entrapment efficiency, and release after 3 h to select the optimum formula. The optimized formula was investigated using TEM, DSC, and FTIR. Cell studies were carried out against the human melanoma cell line to measure cytotoxicity, apoptosis/necrosis, and cell cycle arrest. In silico studies were conducted to understand the interaction between propranolol and the influential receptors in melanoma. The results showed the selected formula consisted of trehalose (175 mg), lecithin (164 mg), and Tween 80 (200 mg) with a size of 245 nm, a charge of -9 mV, an EE% of 68%, and a Q3 of 62%. Moreover, the selected formula has good cytotoxicity compared to the free drug due to the synergistic effect of the drug and the designed carrier. IC50 of free propranolol and the encapsulation of propranolol were 17.48 μg/mL and 7.26 μg/mL, respectively. Also, propranolol and the encapsulation of propranolol were found to significantly increase early and late apoptosis, in addition to inducing G1 phase cell cycle arrest. An in silico virtual study demonstrated that the highest influential receptors in melanoma were the vitamin D receptor, CRH-R1, VEGFR 1, and c-Kit, which matches the results of experimental apoptotic and cell cycle analysis. In conclusion, the selected formula has good cytotoxicity compared to the free drug due to the synergistic effect of the drug and the designed carrier, which make it a good candidate as an antiproliferative agent for treating skin cancer.

Efficient transfected liposomes co-loaded with pNrf2 and pirfenidone improves safe delivery for enhanced pulmonary fibrosis reversion

Pulmonary fibrosis (PF) is an interstitial lung disease with complex pathological mechanism, and there is currently a lack of therapeutics that can heal it completely. Using gene therapy with drugs provides promising therapeutic strategies for synergistically reversing PF. However, improving the intracellular accumulation and transfection efficiency of therapeutic nucleic acids is still a critical issue that urgently needs to be addressed. Herein, we developed lipid nanoparticles (PEDPs) with high transfection efficiency coloaded with pDNA of nuclear factor erythroid 2-related factor 2 (pNrf2) and pirfenidone (PFD) for PF therapy. PEDPs can penetrate biological barriers, accumulate at the target, and exert therapeutic effects, eventually alleviating the oxidative stress imbalance in type II alveolar epithelial cells (AECs II) and inhibiting myofibroblast overactivation through the synergistic effects of Nrf2 combined with PFD, thus reversing PF. In addition, we systematically engineered various liposomes (LNPs), demonstrated that reducing the polyethylene glycol (PEG) proportion could significantly improve the uptake and transfection efficiency of the LNPs, and proposed a possible mechanism for this influence. This study clearly reveals that controlling the composition ratio of PEG in PEDPs can efficiently deliver therapeutics into AECs II, improve pNrf2 transfection, and synergize with PFD in a prospective strategy to reverse PF.

Dual-Responsive Glycopolymers for Intracellular Codelivery of Antigen and Lipophilic Adjuvants

Traditional approaches to vaccines use whole organisms to trigger an immune response, but they do not typically generate robust cellular-mediated immunity and have various safety risks. Subunit vaccines composed of proteins and/or peptides represent an attractive and safe alternative to whole organism vaccines, but they are poorly immunogenic. Though there are biological reasons for the poor immunogenicity of proteins and peptides, one other key to their relative lack of immunogenicity could be attributed to the poor pharmacokinetic properties of exogenously delivered proteins and peptides. For instance, peptides often aggregate at the site of injection and are not stable in biological fluids, proteins and peptides are rapidly cleared from circulation, and both have poor cellular internalization and endosomal escape. Herein, we developed a delivery system to address the lack of protein immunogenicity by overcoming delivery barriers as well as codelivering immune-stimulating adjuvants. The glycopolymeric nanoparticles (glycoNPs) are composed of a dual-stimuli-responsive block glycopolymer, poly[2-(diisopropylamino)ethyl methacrylate]-b-poly[(pyridyl disulfide ethyl methacrylate)-co-(methacrylamidoglucopyranose)] (p[DPA-b-(PDSMA-co-MAG)]). This polymer facilitates protein conjugation and cytosolic release, the pH-responsive release of lipophilic adjuvants, and pH-dependent membrane disruption to ensure cytosolic delivery of antigens. We synthesized p[DPA-b-(PDSMA-co-MAG)] by reversible addition-fragmentation chain transfer (RAFT) polymerization, followed by the formation and physicochemical characterization of glycoNPs using the p[DPA-b-(PDSMA-co-MAG)] building blocks. These glycoNPs conjugated the model antigen ovalbumin (OVA) and released OVA in response to elevated glutathione levels. Moreover, the glycoNPs displayed pH-dependent drug release of the model hydrophobic drug Nile Red while also exhibiting pH-responsive endosomolytic behavior as indicated by a red blood cell hemolysis assay. GlycoNPs coloaded with OVA and the toll-like receptor 7/8 (TLR-7/8) agonist Resiquimod (R848) activated DC 2.4 dendritic cells (DCs) significantly more than free OVA and R848 and led to robust antigen presentation of the OVA epitope SIINFEKL on major histocompatibility complex I (MHC-I). In sum, the dual-stimuli-responsive glycopolymer introduced here overcomes major protein and peptide delivery barriers and could vastly improve the immunogenicity of protein-based vaccines.

ROS-Responsive Glycopolymeric Nanoparticles for Enhanced Drug Delivery to Macrophages

Macrophages play a diverse, key role in many pathologies, including inflammatory diseases, cardiovascular diseases, and cancer. However, many therapeutic strategies targeting macrophages suffer from systemic off-target toxicity resulting in notoriously narrow therapeutic windows. To address this shortcoming, the development of poly(propylene sulfide)-b-poly(methacrylamidoglucopyranose) [PPS-b-PMAG] diblock copolymer-based nanoparticles (PMAG NPs) capable of targeting macrophages and releasing drug in the presence of reactive oxygen species (ROS) is reported. PMAG NPs have desirable physicochemical properties for systemic drug delivery, including slightly negative surface charge, ≈100 nm diameter, and hemo-compatibility. Additionally, due to the presence of PPS in the NP core, PMAG NPs release drug cargo preferentially in the presence of ROS. Importantly, PMAG NPs display high cytocompatibility and are taken up by macrophages in cell culture at a rate ≈18-fold higher than PEGMA NPs-NPs composed of PPS-b-poly(oligoethylene glycol methacrylate). Computational studies indicate that PMAG NPs likely bind with glucose transporters such as GLUT 1/3 on the macrophage cell surface to facilitate high levels of internalization. Collectively, this study introduces glycopolymeric NPs that are uniquely capable of both receptor-ligand targeting to macrophages and ROS-dependent drug release and that can be useful in many immunotherapeutic settings.

Cationic Micelles Outperform Linear Polymers for Delivery of Antisense Oligonucleotides in Serum: An Exploration of Polymer Architecture, Cationic Moieties, and Cell Addition Order

Antisense oligonucleotides (ASOs) are an important emerging therapeutic; however, they struggle to enter cells without a delivery vehicle, such as a cationic polymer. To understand the role of polymer architecture for ASO delivery, five linear polymers and five diblock polymers (capable of self-assembly into micelles) were synthesized with varying cationic groups. After complexation of each polymer/micelle with ASO, it was found that less bulky cationic moieties transfected the ASO more effectively. Interestingly, however the ASO internalization trend was the opposite of the transfection trend for cationic moiety, indicating internalization is not the major factor in determining transfection efficiency for this series. Micelleplexes (micelle-ASO complexes) generally enable higher transfection efficacy as compared to polyplexes (linear polymer-ASO complexes). Additionally, the order of addition of cells and complexes was explored. Linear polyplexes showed better transfection efficiency in adhered cells, whereas micelleplexes delivered the ASO more efficiently when the cells and micelleplexes were added simultaneously. This phenomenon may be due to increased cell-complex interactions as micelleplexes have increased colloidal stability compared to polyplexes. These findings emphasize the importance of polymer composition and architecture in governing the cellular interactions necessary for transfection, thus allowing advancement in the design principles for nonviral nucleic acid delivery formulations.

Synthesis and Application of Trehalose Materials

Trehalose is a naturally occurring, nonreducing disaccharide that is widely used in the biopharmaceutical, food, and cosmetic industries due to its stabilizing and cryoprotective properties. Over the years, scientists have developed methodologies to synthesize linear polymers with trehalose units either in the polymer backbone or as pendant groups. These macromolecules provide unique properties and characteristics, which often outperform trehalose itself. Additionally, numerous reports have focused on the synthesis and formulation of materials based on trehalose, such as nanoparticles, hydrogels, and thermoset networks. Among many applications, these polymers and materials have been used as protein stabilizers, as gene delivery systems, and to prevent amyloid aggregate formation. In this Perspective, recent developments in the synthesis and application of trehalose-based linear polymers, hydrogels, and nanomaterials are discussed, with a focus on utilization in the biomedical field.

Polycation Architecture Affects Complexation and Delivery of Short Antisense Oligonucleotides: Micelleplexes Outperform Polyplexes

Herein, we examine the complexation and biological delivery of a short single-stranded antisense oligonucleotide (ASO) payload with four polymer derivatives that form two architectural variants (polyplexes and micelleplexes): a homopolymer poly(2-dimethylaminoethyl methacrylate) (D), a diblock polymer poly(ethylene glycol)methylether methacrylate-block-poly(2-dimethylaminoethyl methacrylate) (O_bD), and two micelle-forming variants, poly(2-dimethylaminoethyl methacrylate)-block-poly(n-butyl methacrylate) (DB) and poly(ethylene glycol)methylether methacrylate-block-poly(2-dimethylaminoethyl methacrylate)-block-poly(n-butyl methacrylate) (O_bDB). Both polyplexes and micelleplexes complexed ASOs, and the incorporation of an O_b brush enhances colloidal stability. Micellplexes are templated by the size and shape of the unloaded micelle and that micelle-ASO complexation is not sensitive to formulation/mixing order, allowing ease, versatility, and reproducibility in packaging short oligonucleotides. The DB micelleplexes promoted the largest gene silencing, internalization, and tolerable toxicity while the O_bDB micelleplexes displayed enhanced colloidal stability and highly efficient payload trafficking despite having lower cellular uptake. Overall, this work demonstrates that cationic micelles are superior delivery vehicles for ASOs denoting the importance of vehicle architecture in biological performance.

Trehalose-releasing nanogels: A step toward a trehalose delivery vehicle for autophagy stimulation

Trehalose has been widely studied as a treatment for a variety of human disorders due to its ability to stimulate autophagy. Trehalose, however, is poorly adsorbed and is hydrolyzed in the intestinal mucosa, and oral delivery requires relatively high doses to induce autophagy. The parenteral injection of trehalose-releasing nanogels proposed in this study offers an alternative mode of delivery. This study aimed to develop stable colloidal dispersions of trehalose-rich nanogels that could sustainably release trehalose under physiologically relevant conditions. The nanogel design was based on the covalent incorporation of 6-O-acryloyl-trehalose within a polymer network. A series of nine trehalose-rich nanogels with highly conjugated trehalose (up to 59 % w/w) were synthesized and shown to sustainably release trehalose at a rate that is not dose dependent. The nanogels were optimized to keep colloidal stability in serum-enriched cell culture media. The stable nanogels were not cytotoxic to primary HUVECs. Two selected nanogels with opposite surface charges were subjected to extended in vitro characterization that included a cellular uptake study and a hemocompatibility assay. Both nanogels were efficiently taken up by HUVECs during a short incubation. They also proved not to be hemolytic to human RBCs in concentrations up to 2.0 mg/mL. Finally, an in vivo autophagy stimulation study employing transgenic zebrafish and Drosophila larvae demonstrated that prolonged exposure to a cationic trehalose-releasing nanogel can induce autophagic activity in in vivo systems without any detectable toxicity.

pH-Responsive, Two-in-One Doxorubicin and Bcl-2 siRNA-Loaded Micelleplexes for Triple-Negative Breast Cancer Therapy

The combination of chemotherapy and gene therapy is a versatile strategy for treating multi-drug-resistant cancer. Accordingly, we developed a pH-responsive triblock copolymeric carrier for delivering chemotherapeutic and genetic drugs simultaneously....

Inhibition of S. aureus-Infection of HUVECs by Trehalose and Glucose-functionalized Gold Nanoparticles

Microbial adhesion to host cells represents the initial step in the infection process. Several methods have been explored to inhibit microbial adhesion including the use of glycopolymers based on mannose, galactose, sialic acid and glucose. These sugar receptors are however abundant in the body and they are not unique to bacteria. Trehalose in contrast is a unique disaccharide that is wildly expressed by microbes. This carbohydrate has not yet been explored as an anti-adhesive. Herein, gold nanoparticles (AuNPs) coated with trehalose-based polymers were prepared and compared to glucose-functionalized AuNPs and examined for their ability to prevent binding to endothelial cells. Acting as anti-adhesive, trehalose-functionalized nanoparticles decreased the binding of S. aureus to HUVEC cells, while outperforming the control nanoparticles. Microscopy revealed that trehalose coated nanoparticle bound strongly to S. aureus compared to the controls. In conclusion, nanoparticles based on trehalose could be a non-toxic alternative to inhibit S. aureus infection.

New Perspectives of Gene Therapy on Polyglutamine Spinocerebellar Ataxias: From Molecular Targets to Novel Nanovectors

Seven of the most frequent spinocerebellar ataxias (SCAs) are caused by a pathological expansion of a cytosine, adenine and guanine (CAG) trinucleotide repeat located in exonic regions of unrelated genes, which in turn leads to the synthesis of polyglutamine (polyQ) proteins. PolyQ proteins are prone to aggregate and form intracellular inclusions, which alter diverse cellular pathways, including transcriptional regulation, protein clearance, calcium homeostasis and apoptosis, ultimately leading to neurodegeneration. At present, treatment for SCAs is limited to symptomatic intervention, and there is no therapeutic approach to prevent or reverse disease progression. This review provides a compilation of the experimental advances obtained in cell-based and animal models toward the development of gene therapy strategies against polyQ SCAs, providing a discussion of their potential application in clinical trials. In the second part, we describe the promising potential of nanotechnology developments to treat polyQ SCA diseases. We describe, in detail, how the design of nanoparticle (NP) systems with different physicochemical and functionalization characteristics has been approached, in order to determine their ability to evade the immune system response and to enhance brain delivery of molecular tools. In the final part of this review, the imminent application of NP-based strategies in clinical trials for the treatment of polyQ SCA diseases is discussed.

Charge-Conversion Strategies for Nucleic Acid Delivery

Nucleic acids are now considered as one of the most potent therapeutic modalities, as their roles go beyond storing genetic information and chemical energy or as signal transducer. Attenuation or expression of desired genes through nucleic acids have profound implications in gene therapy, gene editing and even in vaccine development for immunomodulation. Although nucleic acid therapeutics bring in overwhelming possibilities towards the development of molecular medicines, there are significant loopholes in designing and effective translation of these drugs into the clinic. One of the major pitfalls lies in the traditional design concepts for nucleic acid drug carriers, viz. cationic charge induced cytotoxicity in delivery pathway. Targeting this bottleneck, several pioneering research efforts have been devoted to design innovative carriers through charge-conversion approaches, whereby built-in functionalities convert from cationic to neutral or anionic, or even from anionic to cationic enabling the carrier to overcome several critical barriers for therapeutics delivery, such as serum deactivation, instability in circulation, low transfection and poor endosomal escape. This review will critically analyze various molecular designs of charge-converting nanocarriers in a classified approach for the successful delivery of nucleic acids. Accompanied by the narrative on recent clinical nucleic acid candidates, the review concludes with a discussion on the pitfalls and scope of these interesting approaches.

Polymeric Delivery of Therapeutic Nucleic Acids

The advent of genome editing has transformed the therapeutic landscape for several debilitating diseases, and the clinical outlook for gene therapeutics has never been more promising. The therapeutic potential of nucleic acids has been limited by a reliance on engineered viral vectors for delivery. Chemically defined polymers can remediate technological, regulatory, and clinical challenges associated with viral modes of gene delivery. Because of their scalability, versatility, and exquisite tunability, polymers are ideal biomaterial platforms for delivering nucleic acid payloads efficiently while minimizing immune response and cellular toxicity. While polymeric gene delivery has progressed significantly in the past four decades, clinical translation of polymeric vehicles faces several formidable challenges. The aim of our Account is to illustrate diverse concepts in designing polymeric vectors towards meeting therapeutic goals of in vivo and ex vivo gene therapy. Here, we highlight several classes of polymers employed in gene delivery and summarize the recent work on understanding the contributions of chemical and architectural design parameters. We touch upon characterization methods used to visualize and understand events transpiring at the interfaces between polymer, nucleic acids, and the physiological environment. We conclude that interdisciplinary approaches and methodologies motivated by fundamental questions are key to designing high-performing polymeric vehicles for gene therapy.

Photocrosslinked Bioreducible Polymeric Nanoparticles for Enhanced Systemic siRNA Delivery as Cancer Therapy

Clinical translation of polymer-based nanocarriers for systemic delivery of RNA has been limited due to poor colloidal stability in the blood stream and intracellular delivery of the RNA to the cytosol. To address these limitations, this study reports a new strategy incorporating photocrosslinking of bioreducible nanoparticles for improved stability extracellularly and rapid release of RNA intracellularly. In this design, the polymeric nanocarriers contain ester bonds for hydrolytic degradation and disulfide bonds for environmentally triggered small interfering RNA (siRNA) release in the cytosol. These photocrosslinked bioreducible nanoparticles (XbNPs) have a shielded surface charge, reduced adsorption of serum proteins, and enable superior siRNA-mediated knockdown in both glioma and melanoma cells in high-serum conditions compared to non-crosslinked formulations. Mechanistically, XbNPs promote cellular uptake and the presence of secondary and tertiary amines enables efficient endosomal escape. Following systemic administration, XbNPs facilitate targeting of cancer cells and tissue-mediated siRNA delivery beyond the liver, unlike conventional nanoparticle-based delivery. These attributes of XbNPs facilitate robust siRNA-mediated knockdown in vivo in melanoma tumors colonized in the lungs following systemic administration. Thus, biodegradable polymeric nanoparticles, via photocrosslinking, demonstrate extended colloidal stability and efficient delivery of RNA therapeutics under physiological conditions, and thereby potentially advance systemic delivery technologies for nucleic acid-based therapeutics.

Glycomacromolecules: Addressing challenges in drug delivery and therapeutic development

Carbohydrate-based materials offer exciting opportunities for drug delivery. They present readily available, biocompatible components for the construction of macromolecular systems which can be loaded with cargo, and can enable targeting of a payload to particular cell types through carbohydrate recognition events established in biological systems. These systems can additionally be engineered to respond to environmental stimuli, enabling triggered release of payload, to encompass multiple modes of therapeutic action, or to simultaneously fulfil a secondary function such as enabling imaging of target tissue. Here, we will explore the use of glycomacromolecules to deliver therapeutic benefits to address key health challenges, and suggest future directions for development of next-generation systems.

Small interfering RNA (siRNA) to target genes and molecular pathways in glioblastoma therapy: Current status with an emphasis on delivery systems

Glioblastoma multiforme (GBM) is one of the worst brain tumors arising from glial cells, causing many deaths annually. Surgery, chemotherapy, radiotherapy and immunotherapy are used for GBM treatment. However, GBM is still an incurable disease, and new approaches are required for its successful treatment. Because mutations and amplifications occurring in several genes are responsible for the progression and aggressive behavior of GBM cells, genetic approaches are of great importance in its treatment. Small interfering RNA (siRNA) is a new emerging tool to silence the genes responsible for disease progression, particularly cancer. SiRNA can be used for GBM treatment by down-regulating genes such as VEGF, STAT3, ELTD1 or EGFR. Furthermore, the use of siRNA can promote the chemosensitivity of GBM cells. However, the efficiency of siRNA in GBM is limited via its degradation by enzymes, and its off-targeting effects. SiRNA-loaded carriers, especially nanovehicles that are ligand-functionalized by CXCR4 or angiopep-2, can be used for the protection and targeted delivery of siRNA. Nanostructures can provide a platform for co-delivery of siRNA plus anti-tumor drugs as another benefit. The prepared nanovehicles should be stable and biocompatible in order to be tested in human studies.

Polymeric nanoparticles for RNA delivery

As exemplified by recent clinical approval of RNA drugs including the latest COVID-19 mRNA vaccines, RNA therapy has demonstrated great promise as an emerging medicine. Central to the success of RNA therapy is the delivery of RNA molecules into the right cells at the right location. While the clinical success of nanotechnology in RNA therapy has been limited to lipid-based nanoparticles currently, polymers, due to their tunability and robustness, have also evolved as a class of promising material for the delivery of various therapeutics including RNAs. This article overviews different types of polymers used in RNA delivery and the methods for the formulation of polymeric nanoparticles and highlights recent progress of polymeric nanoparticle-based RNA therapy.

Glyco-nanoparticles: New drug delivery systems in cancer therapy

Cancer is known as one of the most common diseases that are associated with high mobility and mortality in the world. Despite several efforts, current cancer treatment modalities often are highly toxic and lack efficacy and specificity. However, the application of nanotechnology has led to the development of effective nanosized drug delivery systems which are highly selective for tumors and allow a slow release of active anticancer agents. Different Nanoparticles (NPs) such as the silicon-based nano-materials, polymers, liposomes and metal NPs have been designed to deliver anti-cancer drugs to tumor sites. Among different drug delivery systems, carbohydrate-functionalized nanomaterials, specially based on their multi-valent binding capacities and desirable bio-compatibility, have attracted considerable attention as an excellent candidate for controlled release of therapeutic agents. In addition, these carbohydrate functionalized nano-carriers are more compatible with construction of the intracellular delivery platforms like the carbohydrate-modified metal NPs, quantum dots, and magnetic nano-materials. In this review, we discuss recent research in the field of multifunctional glycol-nanoparticles (GNPs) intended for cancer drug delivery applications.

More than a Confinement: “Soft” and “Hard” Enzyme Entrapment Modulates Biological Catalyst Function

Catalysis makes chemical and biochemical reactions kinetically accessible. From a technological point of view, organic, inorganic, and biochemical catalysis is relevant for several applications, from industrial synthesis to biomedical, material, and food sciences. A heterogeneous catalyst, i.e., a catalyst confined in a different phase with respect to the reagents’ phase, requires either its physical confinement in an immobilization matrix or its physical adsorption on a surface. In this review, we will focus on the immobilization of biological catalysts, i.e., enzymes, by comparing hard and soft immobilization matrices and their effect on the modulation of the catalysts’ function. Indeed, unlike smaller molecules, the catalytic activity of protein catalysts depends on their structure, conformation, local environment, and dynamics, properties that can be strongly affected by the immobilization matrices, which, therefore, not only provide physical confinement, but also modulate catalysis.

Symbiotic Self-Assembly Strategy toward Lipid-Encased Cross-Linked Polymer Nanoparticles for Efficient Gene Silencing

A novel "symbiotic self-assembly" strategy that integrates the advantages of biocompatible lipids with a structurally robust polymer to efficiently encapsulate and deliver siRNAs is reported. The assembly process is considered to be symbiotic because none of the assembling components are capable of self-assembly but can form well-defined nanostructures in the presence of others. The conditions of the self-assembly process are simple but have been chosen such that it offers the ability to arrive at a system that is noncationic for mitigating carrier-based cytotoxicity, efficiently encapsulate siRNA to minimize cargo loss, be effectively camouflaged to protect the siRNA from nuclease degradation, and efficiently escape the endosome to cause gene knockdown. The lipid-siRNA-polymer (L-siP) nanoassembly formation and its disassembly in the presence of an intracellular trigger have been extensively characterized experimentally and through computational modeling. The complexes have been evaluated for the delivery of four different siRNA molecules in six different cell lines, where an efficient gene knockdown is demonstrated. The reported generalized strategy has the potential to make an impact on the development of a safe and effective delivery agent for RNAi-mediated gene therapy that holds the promise of targeting several hard-to-cure diseases.

Nonviral Gene Delivery with Cationic Glycopolymers

The field of gene therapy, which aims to treat patients by modulating gene expression, has come to fruition and has landed several landmark FDA approvals. Most gene therapies currently rely on viral vectors to deliver nucleic acid cargo into cells, but there is significant interest in moving toward chemical-based methods, such as polymer-based vectors, due to their low cost, immunocompatibility, and tunability. The full potential of polymer-based delivery systems has yet to be realized, however, because most polymeric transfection reagents are either too inefficient or too toxic for use in the clinic. In this Account, we describe developments in carbohydrate-based cationic polymers, termed glycopolymers, for enhanced nonviral gene delivery. As ubiquitous components of biological systems, carbohydrates are a rich class of compounds that can be harnessed to improve the biocompatibility of non-native polymers, such as linear polyamines used for promoting transfection. Reineke et al. developed a new class of carbohydrate-based polymers called poly(glycoamidoamine)s (PGAAs) by step-growth polymerization of linear monosaccharides with linear ethyleneamines. These glycopolymers were shown to be both efficient and biocompatible transfection reagents. Systematic modifications of the structural components of the PGAA system revealed structure-activity relationships important to its function, including its ability to degrade in situ. Expanding upon the development of step-growth glycopolymers, monosaccharides, such as glucose, were functionalized as vinyl-based monomers for the formation of diblock copolymers via radical addition-fragmentation chain-transfer (RAFT) polymerization. Upon complexation with plasmid DNA, the glucose-containing block creates a hydrophilic shell that promotes colloidal stability as effectively as PEG functionalization. An N-acetyl-d-galactosamine variant of this diblock polymer yields colloidally stable particles that show increased receptor-mediated uptake by liver hepatocytes in vitro and promotes liver targeting in mice. Finally, the disaccharide trehalose was incorporated into polycationic structures using both step-growth and RAFT techniques. It was shown that these trehalose-based copolymers imparted increased colloidal stability and yielded plasmid and siRNA polyplexes that resist aggregation upon lyophilization and reconstitution in water. The aforementioned series of glycopolymers use carbohydrates to promote effective and safe delivery of nucleic acid cargo into a variety of human cells types by promoting vehicle degradation, tissue-targeting, colloidal stabilization, and stability toward lyophilization to extend shelf life. Work is currently underway to translate the use of glycopolymers for safe and efficient delivery of nucleic acid cargo for gene therapy and gene editing applications.

Hydroxyl-Rich PGMA-Based Cationic Glycopolymers for Intracellular siRNA Delivery: Biocompatibility and Effect of Sugar Decoration Degree

The ErbB family of proteins, structurally related to the epidermal growth factor receptor (EGFR), is found to be overexpressed in many cancers such as gliomas, a lung and cervical carcinomas. Gene therapy allows to modify the expression of genes like ErbB and has been a promising strategy to target oncogenes and tumor suppressor genes. In the current work, novel hydroxyl-rich poly(glycidyl methacrylate) (PGMA)-based cationic glycopolymers were designed for intracellular small interfering RNA (siRNA) delivery to silence the EGFR gene. The cationic polymers with different sugar decoration degrees (0, 9, and 33%) were synthesized by ring-opening reaction of PGMA with ethanolamine and a lactobionic acid-derived aminosaccharide (Lac-NH₂). Specific EGFR knockdown of the protein tyrosine kinase ErbB-overexpressing HeLa cells was achieved using these hydroxyl-rich polycation/siRNA complexes. Higher sugar content improved the biocompatibility of the polymers, but it also seems to decrease the EGFR knockdown capability, which should mainly be related to the surface charge of polyplexes. An optimum balance was observed with PGEL-1 (9% sugar content) formulation, achieving ∼52% knockdown efficiency as well as high cell viability. Considering the specific recognition between galactose residues and asialoglycoprotein receptor in hepatocytes, our novel PGMA-based cationic glycopolymers exhibited promising future to serve as a safe and targeting gene delivery vector to hepatoma cell line like HepG2.

Efficient synthesis of amino acid polymers for protein stabilization

Poly-l-glutamate exerts substantial protein stabilization during lyophilization by preventing protein aggregation.

Trehalose-functional glycopeptide enhances glycerol-free cryopreservation of red blood cells

Arginine- and trehalose-modified ε-polylysine (ε-PL) demonstrated a high synergistic function with trehalose for RBC cryopreservation.

Biologically Active Branched Polysaccharide Mimetics: Synthesis via Ring-Opening Polymerization of a Maltose-Based β-Lactam

Stereoregular poly-amido-saccharides bearing α-glucopyranose branches (Mal-PASs) are synthesized by anionic ring-opening polymerization of a maltose-based β-lactam monomer followed by debenzylation. The polymerization affords high molecular weight polymers (up to 31500 g/mol) with narrow dispersities (Đ < 1.1). Deprotected Mal-PASs are highly soluble in water and adopt a left-handed helical conformation in solution. Turbidimetric assay shows that Mal-PASs are multivalent ligands to lectin Concanavalin A.

Molecular engineering solutions for therapeutic peptide delivery

Proteins and their interactions in and out of cells must be well-orchestrated for the healthy functioning and regulation of the body. Even the slightest disharmony can cause diseases. Therapeutic peptides are short amino acid sequences (generally considered <50 amino acids) that can naturally mimic the binding interfaces between proteins and thus, influence protein-protein interactions. Because of their fidelity of binding, peptides are a promising next generation of personalized medicines to reinstate biological harmony. Peptides as a group are highly selective, relatively safe, and biocompatible. However, they are also vulnerable to many in vivo pharmacologic barriers limiting their clinical translation. Current advances in molecular, chemical, and nanoparticle engineering are helping to overcome these previously insurmountable obstacles and improve the future of peptides as active and highly selective therapeutics. In this review, we focus on self-assembled vehicles as nanoparticles to carry and protect therapeutic peptides through this journey, and deliver them to the desired tissue.

Trehalose-Functionalized Gold Nanoparticle for Inhibiting Intracellular Protein Aggregation

Trehalose is a well-known antiamyloidogenic molecule that inhibits protein aggregation under the intracellular/extracellular condition, and recent work shows that the nanoparticle form of trehalose can further enhance this performance. Here we have designed a trehalose-functionalized Au nanoparticle that can inhibit the aggregation of a polyglutamine-containing mutant protein inside the neuronal cell. Designed nanoparticles have a 20-30 nm Au core with about 350 ± 50 trehalose molecules per particle on the surface on average. They enter the cell, inhibit mutant protein aggregation, and enhance the cell survival against toxic protein aggregates. This work extends the application potential of trehalose for the understanding and treatment of different diseases involving protein aggregation.

Diblock Terpolymers Are Tunable and pH Responsive Vehicles To Increase Hydrophobic Drug Solubility for Oral Administration

Synthetic polymers offer tunable platforms to create new oral drug delivery vehicles (excipients) to increase solubility, supersaturation maintenance, and bioavailability of poorly aqueous soluble pharmaceutical candidates. Five well-defined diblock terpolymers were synthesized via reversible addition-fragmentation chain transfer polymerization (RAFT) and consist of a first block of either poly(ethylene-alt-propylene) (PEP), poly(N-isopropylacrylamide) (PNIPAm), or poly(N,N-diethylaminoethyl methacrylate) (PDEAEMA) and a second hydrophilic block consisting of a gradient copolymer of N,N-dimethylacrylamide (DMA) and 2-methacrylamidotrehalose (MAT). This family of diblock terpolymers offers hydrophobic, hydrophilic, or H-bonding functionalities to serve as noncovalent sites of drug binding. Drug-polymer spray dried dispersions (SDDs) were created with a model drug, probucol, and characterized by differential scanning calorimetry (DSC). These studies revealed that probucol crystallinity decreased with increasing H-bonding sites available in the polymer. The PNIPAm-b-P(DMA-grad-MAT) systems revealed the best performance at pH 6.5, where immediate probucol release and effective maintenance of 100% supersaturation was found, which is important for facilitating drug solubility in more neutral conditions (intestinal environment). However, the PDEAEMA-b-P(DMA-grad-MAT) system revealed poor probucol dissolution at pH 6.5 and 5.1. Alternatively, at an acidic pH of 3.1, a rapid and high dissolution profile and effective supersaturation maintenance of up to 90% of the drug was found, which could be useful for triggering drug release in acidic environments (stomach). The PEP-b-P(DMA-grad-MAT) system showed poor performance (only ∼20% of drug solubility at pH 6.5), which was attributed to the low solubility of the polymers in the dissolution media. This work demonstrates the utility of diblock terpolymers as a potential new excipient platform to optimize design parameters for triggered release and solubilizing hydrophobic drug candidates for oral delivery.

Development of Excipient-Free Freeze-Dryable Unimolecular Hyperstar Polymers for Efficient siRNA Silencing

We designed a unimolecular hyperstar polymer for efficient small interfering RNA (siRNA) delivery that can be processed under repeated lyophilization and reconstitution without the need of any excipient. The hyperstar polymer contains a biodegradable hyperbranched core and is bound to siRNA through its thousands of cationic arms that radiate from its core. The siRNA/hyperstar complexes showed siRNA transfection efficiency that was superior to that of Lipofectamine2000 in regard to the gene for human Cu, Zn superoxide dismutase 1 (SOD1), whose mutation causes familial amyotrophic lateral sclerosis. More importantly, hyperstar polymers as unimolecular containers minimized the multipolymer cross-interaction during lyophilization, and this maintained the uniquely high transfection efficiency of the siRNA/hyperstar complexes after repeated freeze-drying and reconstitution without the conventional need for excipient.

Anionic Polymer and Quantum Dot Excipients to Facilitate siRNA Release and Self-Reporting of Disassembly in Stimuli-Responsive Nanocarrier Formulations

The incorporation of anionic excipients into polyplexes is a promising strategy for modulating siRNA binding versus release and integrating diagnostic capabilities; however, specific design criteria and structure-function relationships are needed to facilitate the development of nanocarrier-based theranostics. Herein, we incorporated poly(acrylic acid) (PAA) and quantum dot (QD) excipients into photolabile siRNA polyplexes to increase gene silencing efficiencies by up to 100% and enable self-reporting of nanocarrier disassembly. Our systematic approach identified the functional relationships between gene silencing and key parameters such as excipient loading fractions and molecular weights that facilitated the establishment of design rules for optimization of nanocarrier efficacy. For example, we found that PAA molecular weights ∼10-20× greater than that of the coencapsulated siRNA exhibited the most efficient release and silencing. Furthermore, siRNA release assays and RNAi modeling allowed us to generate a PAA "heat map" that predicted gene silencing a priori as a function of PAA molecular weight and loading fraction. QDs further promoted selective siRNA release and provided visual as well as Förster resonance energy transfer (FRET)-based monitoring of the dynamic changes in nanostructure in situ. Moreover, even with the addition of anionic components, our formulations exhibited substantially improved stability and shelf life relative to typical formulations, with complete stability after a week of storage and full activity in the presence of serum. Taken together, this study enabled synergistic improvements in siRNA release and diagnostic capabilities, along with the development of mechanistic insights that are critical for advancing the translation of nucleic acid theranostics into the clinic.

Nanotechnology in Glycomics: Applications in Diagnostics, Therapy, Imaging, and Separation Processes

This review comprehensively covers the most recent achievements (from 2013) in the successful integration of nanomaterials in the field of glycomics. The first part of the paper addresses the beneficial properties of nanomaterials for the construction of biosensors, bioanalytical devices, and protocols for the detection of various analytes, including viruses and whole cells, together with their key characteristics. The second part of the review focuses on the application of nanomaterials integrated with glycans for various biomedical applications, that is, vaccines against viral and bacterial infections and cancer cells, as therapeutic agents, for in vivo imaging and nuclear magnetic resonance imaging, and for selective drug delivery. The final part of the review describes various ways in which glycan enrichment can be effectively done using nanomaterials, molecularly imprinted polymers with polymer thickness controlled at the nanoscale, with a subsequent analysis of glycans by mass spectrometry. A short section describing an active glycoprofiling by microengines (microrockets) is covered as well.

Substituted Polyesters by Thiol-Ene Modification: Rapid Diversification for Therapeutic Protein Stabilization

Many proteins, especially those used as therapeutics, are unstable to storage and shipping temperatures, leading to increased costs in research and industry. Therefore, the design and synthesis of novel stabilizers is an important area of investigation. Herein we report new degradable polymers that stabilize proteins to environmental stressors such as refrigeration and elevated temperature. Specifically, polycaprolactones with different pendant groups were synthesized and surveyed for their ability to stabilize an important therapeutic protein to storage and shipping conditions. Ring-opening polymerization (ROP) of an allyl-substituted caprolactone monomer was carried out using the organocatalyst 1,5,7-triazabicyclo[4.4.0]dec-5-ene (TBD) to yield a well-defined, alkene-substituted degradable polymer, which was used as a common backbone to control for the degree of polymerization. Relevant side chains such as trehalose, lactose, glucose, carboxybetaine, and oligo(ethylene glycol) were installed via postpolymerization thiol-ene reactions. These degradable polymers were then employed as excipients for the stabilization of the therapeutic protein granulocyte colony-stimulating factor (G-CSF) against storage at 4 °C and shipping temperatures of 60 °C. The best stabilization was observed using the trehalose- and zwitterion- substituted polyesters. Both the trehalose- and carboxybetaine-substituted pCL were further investigated with regard to molecular weight dependence, and it was found that the molecular weight was minimally important for stabilization to refrigeration, but critical for G-CSF stabilization at elevated temperatures. Both high performing zwitterionic and trehalose polyesters were also degraded, and the polymers and degradation products were shown to be noncytotoxic. This work provides potential biocompatible polymers for stabilization of the important therapeutic G-CSF, as well as a general platform for the future discovery of new polymeric protein stabilizers.

Trehalose Glycopolymer Enhances Both Solution Stability and Pharmacokinetics of a Therapeutic Protein

Biocompatible polymers such as poly(ethylene glycol) (PEG) have been successfully conjugated to therapeutic proteins to enhance their pharmacokinetics. However, many of these polymers, including PEG, only improve the in vivo lifetimes and do not protect proteins against inactivation during storage and transportation. Herein, we report a polymer with trehalose side chains (PolyProtek) that is capable of improving both the external stability and the in vivo plasma half-life of a therapeutic protein. Insulin was employed as a model biologic, and high performance liquid chromatography and dynamic light scattering confirmed that addition of trehalose glycopolymer as an excipient or covalent conjugation prevented thermal or agitation-induced aggregation of insulin. The insulin-trehalose glycopolymer conjugate also showed significantly prolonged plasma circulation time in mice, similar to the analogous insulin-PEG conjugate. The insulin-trehalose glycopolymer conjugate was active as tested by insulin tolerance tests in mice and retained bioactivity even after exposure to high temperatures. The trehalose glycopolymer was shown to be nontoxic to mice up to at least 1.6 mg/kg dosage. These results together suggest that the trehalose glycopolymer should be further explored as an alternative to PEG for long circulating protein therapeutics.

Effect of trehalose polymer regioisomers on protein stabilization

Polymers with different trehalose side chain regioisomers were synthesized and compared for insulin stabilization.