Nanoparticle Assembly as a Materials Development Tool

Tannic acid-based bio-MOFs with antibacterial and antioxidant properties acquiring non-hemolytic and non-cytotoxic characteristics

Tannic acid (TA) based bio-metal phenolic networks (bio-MPNs) were prepared by using Cu(II), Zn(II), Bi(III), Ce(III), La(III), and Ti(IV) metal ions. TA-based bio-MPNs exhibited wedge-shaped pores between 16.4 and 25.8 nm pore size ranges. The higher gravimetric yield% was achieved for TA-Bi(III), and TA-Ti(IV) bio-MPNs with more than 90 %, and higher surface area was observed for TA-La(IIII) bio-MPNs as 56.2 m2/g with 17.3 nm average pore sizes. All TA-based MPNs are non-hemolytic with less than 5 % hemolysis ratio, whereas TA-based Bio-MPNs do not affect blood clotting with > 90 % blood clotting indexes except for TA-Cu(II) Bio-MPNs at 0.1 mg/mL concentration. Moreover, TA-Bi(III) and TA-Ce(III) Bio-MPNs were found to be safer materials showing no significant toxicity on L929 fibroblast cells at 100 μg/mL concentration, along with TA-based Bio-MPNs prepared with Cu(II), Zn(II), La(III), and Ti(IV) metal ions that could be safely used in in vivo applications at 1 μg/mL concentration. It has been proven by 2 different antioxidant tests that the prepared TA-based Bio-MPNs show antioxidant properties even if their TA-derived antioxidant properties decrease. Furthermore, all types of TA-based Bio-MPNs show great antimicrobial activity depending on the metal ion or microorganism types and the highest antibacterial/antifungal effect was determined for TA-Cu(II), and TA-Zn(II) Bio-MPNs with the lowest MBC/MFC values against Pseudomonas aeruginosa ATCC 10145, Bacillus subtilis ATCC 6633, and Candida albicans ATCC 10231.

Exploring the impact of particle stability, size, and morphology on nanofluid thermal conductivity: A comprehensive review for energy applications

Recent advancements enhance the efficiency of energy conversion processes and leverage nanofluids-novel thermal fluids with nanoparticles (under 100 nm) suspended in conventional fluids. These nanofluids significantly alter thermophysical properties, notably thermal conductivity, which is crucial for evaluating their thermal performance. Despite three decades of intensive research, disagreements persist due to a lack of comprehensive data on how particle size, shape, stability, and others influence thermal conductivity. This review tries to fill this literature gap by critically reviewing how the characteristics that distinguish nanofluids from their micrometer-sized counterparts affect the stability and convective heat transfer. The study compares experimental results in a systemic way that addresses the reported inconsistencies and provides a general summary of the thermal behavior of nanofluids in energy systems. It has also pointed out the lack of reliable hybrid models considering all parameters affecting thermal conductivity. The current study assembles data from different analyses showing that a particle size within the 10-50 nm range may enhance thermal conductivity, depending on the base-fluid used. Likewise, the morphological options available, namely, spherical, ellipsoid, platelet, and blade-like, all have given promise for enhancing thermal conductivity, hence considering morphological issues. Finally, stability, defined by the zeta potential analyses, forms a vital criterion for the long-term sustainability of these enhancements. By consolidating experimental results across different research groups, this review highlights the variability and sometimes contradictory findings in thermal conductivity enhancements, ranging from negligible increases to over 50% improvement in specific nanofluids systems. The absence of reliable hybrid models encapsulating all influencing parameters for predicting thermal conductivity is critically addressed. It is concluded by identifying the main challenges in the field and offering recommendations for standardizing measurement techniques, which include the need for a unified model capable of predicting thermal conductivity enhancements with an accuracy of ±5%.

Forging Nanoparticle Superlattices with Colloidal Metallurgy

Nanoparticle superlattices present transformative opportunities for material design by enabling precise control over both nanoscale organization and composition; however, translating these assemblies into macroscopic constructs while preserving nanoscale order remains a critical challenge due to the incompatibility of traditional processing techniques with colloidal systems. This study introduces "colloidal metallurgy," a framework for understanding and controlling defect evolution and densification in nanoparticle superlattices during colloidal sintering. We investigate the effects of pressure and temperature to elucidate mechanisms of particle transport, defect annealing, and densification as single-crystal colloidal assemblies coalesce into polycrystalline superlattices. Pressure-driven crystallite fracture is identified as the primary mode of densification, while temperature enhances particle mobility, enabling defect reduction and grain growth. A multistage sintering strategy employing high temperature annealing to grow grains and restore fracture-based capacity for densification was developed to produce dense (∼1% porosity) polycrystals with low defect counts, demonstrating a pathway for processing nanoparticle superlattices. By exploring the parallels and distinctions between atomic and colloidal sintering, this work establishes critical insights into the mechanisms governing colloidal material processing. These findings lay the groundwork for defect engineering in colloidal systems, offering a scalable approach to design macroscopic materials with tailored properties.

Mechanically Strong Nanocolloidal Supramolecular Plastics Assembled from Carbonized Polymer Dots with Photoactivated Room-Temperature Phosphorescence

The innovative development of supramolecular plastics (SPs) is recognized as one of the global efforts to address the environmental pollution caused by petroleum-based plastics. Traditional SPs usually show weak mechanical strength because of relatively weak noncovalent bonds and a lack of appropriate functions for practical applications. To overcome these limitations, we herein report nanocolloidal supramolecular plastics (NSPs) assembled from newly emerging nanoparticles, namely, carbonized polymer dots (CPDs) modified with ureido pyrimidinone groups. These NSPs display good mechanical properties, unique photoactivated room-temperature phosphorescence (RTP), and excellent solvent stability. Notably, NSPs are recyclable with maintenance of their original mechanics and photoactivated RTP after several usages. Furthermore, photoactivated RTP with multiple colors is achieved by incorporating organic molecules into NSPs. We show proof-of-concept applications of NSPs in high-level information security. The results in this work pave an avenue toward functional materials assembled from CPDs and will advance the development of innovative nanomaterials for sustainable applications.

Ligand-Solvent Library Design for Tailoring Interparticle Interactions in Colloidal Nanocrystals

This study explores the critical role of nonpolar ligand-solvent systems in modulating interparticle interactions in colloidal nanocrystals, profoundly affecting colloidal stability and enabling precision self-assembly. A library of 28 ligands with diverse molecular fragments─double bonds, branched chains, benzene rings, and naphthalene rings─and four solvents was developed to investigate how fragment types and positions affect ligand ordering and interparticle attraction. Explicit solvent simulations with enhanced sampling techniques reveal that fragments near the headgroup or midsection disrupt ligand ordering and weaken interparticle attraction, whereas terminal placement fosters ordered ligand packing and enhances attraction. Simulation predictions on the relationship between ligand structures and interparticle interactions were validated through self-assembly experiments using colloidal nanocrystals passivated by six representative ligands. Furthermore, the potential to control ligand ordering and interparticle interactions was demonstrated by tuning fragment types, positions, combinations, and solvent sizes. This work deepens the understanding of ligand-solvent dynamics and provides a theoretical framework for the molecular-level design of nanocrystal self-assembly.

Uniform Single-Domain Liquid Crystalline Hexagonal Rods by Synchronized Polymerization and Self-Assembly Using Disc-Shaped Monomers

The fabrication of nanostructures from polycyclic aromatic hydrocarbons (PAHs) is highly attractive owing to their unique optical, electrical, and magnetic properties. However, the creation of uniform and well-defined PAH nanostructures by self-assembly still remains a significant challenge. Herein, we report that highly uniform hexagonal rods can be obtained from triphenylene (TP)-derived monomers by synchronized polymerization and self-assembly (SPSA). These rods have a single-domain columnar liquid crystalline structure in which columns formed from stacked TPs are along the long axis of the rods. The length/diameter ratios of the rods can be tuned over a wide range. Key factors to achieve SPSA of PAHs were analyzed, and the formation mechanism was clarified. In particular, it is observed that successful SPSA occurs below an upper critical temperature, which could be attributed to insufficient microphase separation between the side chains and the main chains and should be a general principle for SPSA. Furthermore, we demonstrate that the columnar stacking of TP units significantly promotes the intersystem crossing of the singlet excited state to the triplet excited state, resulting in simultaneous fluorescence and phosphorescence emission at room temperature. This work may be extended to a wide range of PAHs to regulate their self-assembly and light emission properties.

DNA‑Directed Assembly of Photonic Nanomaterials for Diagnostic and Therapeutic Applications

DNA-directed assembly has emerged as a versatile and powerful approach for constructing complex structured materials. By leveraging the programmability of DNA nanotechnology, highly organized photonic systems can be developed to optimize light-matter interactions for improved diagnostics and therapeutic outcomes. These systems enable precise spatial arrangement of photonic components, minimizing material usage, and simplifying fabrication processes. DNA nanostructures, such as DNA origami, provide a robust platform for building multifunctional photonic devices with tailored optical properties. This review highlights recent progress in DNA-directed assembly of photonic nanomaterials, focusing on their applications in diagnostics and therapeutics. It provides an overview of the latest advancements in the field, discussing the principles of DNA-directed assembly, strategies for functionalizing photonic building blocks, innovations in assembly design, and the resulting optical effects that drive these developments. The review also explores how these photonic architectures contribute to diagnostic and therapeutic applications, emphasizing their potential to create efficient and effective photonic systems tailored to specific healthcare needs.

Curvature-guided depletion stabilizes Kagome superlattices of nanocrystals

Shape-anisotropic nanocrystals and patchy particles have been explored to construct complex superstructures, but most studies have focused on convex shapes. We report that nonconvex, dumbbell-shaped nanocrystals (nanodumbbells) exhibit globally interlocking self-assembly behaviors governed by curvature-guided depletion interactions. By tailoring the local curvature of nanodumbbells, we can precisely and flexibly adjust particle bonding directionality, a level of control rarely achievable with conventional convex building blocks. These nanodumbbells can undergo long-range ordered assembly into various intricate two-dimensional superlattices, including the chiral Kagome lattice. Theoretical calculations reveal that the Kagome lattice is a thermodynamically stable phase, with depletion interactions playing a crucial role in stabilizing these non-close-packed structures. The emergence of Kagome lattices and other unusual structures highlights the vast potential of nonconvex nanocrystals for creating sophisticated architectures.

Biodegradable Nanobowls with Controlled Dents

Nanobowls show promising potential in biomedical applications, such as bioimaging, cargo delivery, and disease theranostics, due to their unique concave structure and interior cavities. However, the lack of biodegradable nanobowls with manipulable size (especially the dent size) still exists as an obstacle for their in-depth exploration and application in biomedical fields. Herein, polypeptide-based nanobowls are successfully obtained by the self-assembly of a graft polypeptide [named TPE-P(GAAzo21-stat-GA29)] via a solvent-switch method. Through the synergistic effect between the hydrogen bonding and π-π stacking interactions, the size of nanobowls and the corresponding dents can be facilely controlled by altering either the initial polypeptide concentration or the cosolvents in self-assembly. Furthermore, such polypeptide-based nanobowls are demonstrated to be biocompatible and biodegradable in vitro, which may promote the development of biomedical nanobowls in the future.

Supercarbon assembly inspired two-dimensional hourglass fermion

By using a tight-binding model, first-principles calculations, and ab initio molecular dynamics simulations, we theoretically demonstrate that the C76-Td-assembled two-dimensional (2D) honeycomb lattice is stable at room temperature and is resistant to mechanical deformation. We disclose that each C76-Td mimics a single carbon atom (geometrically and electronically); hence, it plays the role of one supercarbon. This inspires that the 2D material exhibits an exotic hourglass-like fermion at the Fermi level. Furthermore, we suggest that biaxial strains could modify the hourglass shape, including the electronic Fermi velocity, and induce magnetization. Hexagonal boron nitride can be employed as a protective layer without affecting the electronic structure of this material. This hourglass fermion has the potential to serve as a promising material for high-speed electronic devices and to bridge the gap between zero-dimensional spherical carbon clusters and two-dimensional graphene.

Nanocluster reaction-driven in situ transformation of colloidal nanoparticles to mesostructures

Atomically precise noble metal nanoclusters (NCs) are molecular materials known for their precise composition, electronic structure, and unique optical properties, exhibiting chemical reactivity. Herein, we demonstrated a simple one-pot method for fabricating self-assembled Ag-Au bimetallic mesostructures using a reaction between 2-phenylethanethiol (PET)-protected atomically precise gold NCs and colloidal silver nanoparticles (Ag NPs) in a tunable reaction microenvironment. The reaction carried out in toluene at 45 °C with constant stirring at 250 revolutions per minute (RPM) yielded a thermally stable, micron-sized cuboidal mesocrystals of self-assembled AgAu@PET nanocrystals. However, the reaction in dichloromethane at room temperature with constant stirring at 250 RPM resulted in a self-assembled mesostructure of randomly close-packed AgAu@PET NPs. Using a host of experimental techniques, including optical and electron microscopy, optical absorption spectroscopy, and light scattering, we studied the nucleation and growth processes. Our findings highlight a strategy to utilize precision and plasmonic NP chemistry in tailored microenvironments, leading to customizable bimetallic hybrid three-dimensional nanomaterials with potential applications.

Terminal Tryptophan-Directed Anisotropic Self-Assembly for Precise Protein Nanostructure Regulation

A common challenge in nanotechnology is synthesizing nanomaterials with well-defined structures. In particular, it remains a major unresolved challenge to precisely regulate the structure and function of protein nanomaterials, which are structurally diverse, highly ordered, and complex and offer an innovative means that enables a high performance in various nanodevices, which is rarely achievable with other nanomaterials. Here an innovative approach is proposed to fabricating multi-dimensional (0- to 3D) protein nanostructures with functional and structural specialties via molecular-level regulation. This approach is based on a stable, consistent, anisotropic self-assembly of Tobacco mosaic virus (TMV) coat protein-derived engineered building blocks where genetically added tryptophan residues are externally tailored. The unique structural characteristics of each nanostructure above are demonstrated in detail through various analyses (electron microscopy, atomic force microscopy, dynamic light scattering, and small-angle X-ray scattering) and further investigated through molecular dynamics simulations, indicating that this control, anisotropic, and molecular assembly-based approach to regulating protein nanostructures holds great potential for customizing a variety of nanomaterials with unique functions and structures.

Precisely Constructing Superlattices of Soft Giant Molecules via Regulating Volume Asymmetry

Soft matters, particularly giant molecular self-assembly, have successfully replicated complex structures previously exclusive to metal alloys. These superlattices are constructed from mesoatoms─supramolecular spherical motifs of aggregated molecules, and the formation of superlattices critically depends on the volume distributions of these mesoatoms. Herein, we introduce two general methods to control volume asymmetry (i.e., the volumes' ratio of the largest to smallest mesoatoms, VL/VS) within giant molecular self-assembly. Leveraging the spontaneous increase in the mesoatomic volume ratio in unary systems and self-sorted binary blends, we systematically adjust the volume asymmetry from 1.0 to 9.0 across 24 unary systems and 56 binary blends of giant molecules, uncovering the formation of various superlattices, including BCC, Frank-Kasper A15, σ, Laves C14, C15, NaZn13, AlB2, and notably, the first NaCl like superlattice in homogeneous soft matter self-assembly. A geometric-based analysis, combined with experimental results, further establishes a quantitative relationship between volume asymmetry and the corresponding superlattice formations, thus laying a solid foundation for superlattice engineering within giant molecular systems to mimic and even beyond metal alloys. The lattice parameters of various unit cells range from approximately 5 to 20 nm. Our investigation in giant molecules could guide the advancement of mesoscopic, periodic soft matter materials.

Understanding the chemistry of mesostructured porous nanoreactors

Porous nanoreactors mimic the structures and functions of cells, providing an adaptable material with multiple functions and effects. These reactors can be nanoscale containers and shuttles or catalytic centres, drawing in reactants for cascading reactions with multishelled designs. The detailed construction of multi-level reactors at the nanometre scale remains a great challenge, but to regulate the reaction pathways within a reactor, designs of great intricacy are required. In this Review, we define the basic structural characteristics of porous nanoreactors, while also discussing the design principles and synthetic chemistry of these structures with respect to their emerging applications in energy storage and heterogeneous catalysis. Finally, we describe the difficulties of the structural optimization of these reactors and propose possible ways to improve porous nanoreactor design for future applications.

The Application of Nano Drug Delivery Systems in Female Upper Genital Tract Disorders

The prevalence of female reproductive system disorders is increasing, especially among women of reproductive age, significantly impacting their quality of life and overall health. Managing these diseases effectively is challenging due to the complex nature of the female reproductive system, characterized by dynamic physiological environments and intricate anatomical structures. Innovative drug delivery approaches are necessary to facilitate the precise regulation and manipulation of biological tissues. Nanotechnology is increasingly considered to manage reproductive system disorders, for example, nanomaterial imaging allows for early detection and enhances diagnostic precision to determine disease severity and progression. Additionally, nano drug delivery systems are gaining attention for their ability to target the reproductive system successfully, thereby increasing therapeutic efficacy and decreasing side effects. This comprehensive review outlines the anatomy of the female upper genital tract by highlighting the complex mucosal barriers and their impact on systemic and local drug delivery. Advances in nano drug delivery are described for their sustainable therapeutic action and increased biocompatibility to highlight the potential of nano drug delivery strategies in managing female upper genital tract disorders.

Utilizing machine learning and molecular dynamics for enhanced drug delivery in nanoparticle systems

Materials data science and machine learning (ML) are pivotal in advancing cancer treatment strategies beyond traditional methods like chemotherapy. Nanotherapeutics, which merge nanotechnology with targeted drug delivery, exemplify this advancement by offering improved precision and reduced side effects in cancer therapy. The development of these nanotherapeutic agents depends critically on understanding nanoparticle (NP) properties and their biological interactions, often analyzed through molecular dynamics (MD) simulations. This study enhances these analyses by integrating ML with MD simulations, significantly improving both prediction accuracy and computational efficiency. We introduce a comprehensive three-stage methodology for predicting the solvent-accessible surface area (SASA) of NPs, which is crucial for their therapeutic efficacy. The process involves training an ML model to forecast the many-body tensor representation (MBTR) for future time steps, applying data augmentation to increase dataset realism, and refining the SASA predictor with both augmented and original data. Results demonstrate that our methodology can predict SASA values 299 time steps ahead with a 40-fold speed improvement and a 25% accuracy increase over existing methods. Importantly, it provides a 300-fold increase in computational speed compared to traditional simulation techniques, offering substantial cost and time savings for nanotherapeutic research and development.

Supercrystal Engineering of Nanoarrows Enabled by Tailored Concavity

Self-assembly of nanoparticles into supercrystals represents a powerful approach to create unique and complex superstructures with fascinating properties and novel functions, but the complexity in spatial configuration, and the tunability in lattice structure are still quite limited compared to the crystals formed by atoms and molecules. Herein, shallowly concave gold nanoarrows with a unique concave-convex geometry are synthesized and employed as novel building blocks for shape-directed self-assembly of a wealth of complex 3D supercrystals with unprecedented configurations. The obtained diverse superstructures including six Interlocking-type supercrystals and three Packing-type supercrystals exhibit four types of Bravais lattices (i.e., tP, oI, tI, and oF) and six types of crystallographic space groups (i.e., Pmmm, I222, Pnnm, Ibam, I4/mmm, and Fmmm), which have not been documented in the mesoscale self-assembled systems. It has been revealed that the relative yield of different supercrystal structures is mainly determined by the packing density and deformability of the supercrystals, which are closely related to the tailored concavity of the nanoparticles and is affected by the particle concentration, thus allowing for programmable self-assembly into specific supercrystals through particle shape modulation. The concavity-enabled supercrystal engineering may open a new avenue toward unconventional nanoparticle superstructures with expanded complexity, tunability, and functionality.

Versatility of the Templated Surface Assembly of Nanoparticles from Water-in-Oil Microemulsions in Equivalent Hybrid Nanostructured Films

Water-in-oil microemulsions, as stable colloidal dispersions from quasi-ternary mixtures, have been used in diverse applications, including nanoreactors for confined chemical processes. Their use as soft templates not only includes nanomaterial synthesis but also the interfacial assembly of nanoparticles in hybrid nanostructures. Especially the hierarchical arrangement of different types of nanoparticles over a surface in filament networks constitutes an interesting bottom-up strategy for facile and tunable film coating. Herein, we demonstrate the versatility of this surface assembly from microemulsion dispersions. Transmission and Scanning Electron Microscopy, in addition to UV-Vis Transmittance Spectroscopy, proved the assembly tunability after solvent evaporation under different conditions: the nanostructured films can be formed over different surfaces, using different compositions of liquid phases, as well as with the incorporation of different nanoparticle materials while keeping equivalent surface functionalization. This offers the possibility of adapting different components and conditions for coating tuning on a larger scale with simple procedures.

Hierarchical assembly of Ag40 nanowheel ranging from building blocks to diverse superstructure regulation

Achieving precise and controllable hierarchical self-assembly of functional nanoclusters within crystal lattices to create distinct architectures is of immense significance, yet it creates considerable challenges. Here we successfully synthesized a silver nanowheel Ag40, along with its optically pure enantiomers S-/R-Ag40. Each species possesses an internal nanospace and exhibits host-guest interactions. These structures are constructed from primary building blocks (Ag9). By manipulating the surface anions and guest molecules, the nanowheels function as secondary building blocks, spontaneously organizing into complex double- and triple-helical crystalline superstructures or one-dimensional chains {Ag41}n through conformational matching and diverse noncovalent interactions. Moreover, we demonstrate that the water-mediated complex specifically assembled with uridine monophosphate nucleotides, resulting in chiral assemblies of Ag40 that exhibit chiroptical activity for specific recognition. Our findings provide insights into the efficient construction of assemblies with hollow frameworks and propose strategies for superstructure engineering by manipulating surface motifs.

Co-Assembly of Soft and Hard Nanoparticles into Macroscopic Colloidal Composites with Tailored Mechanical Property and Processability

Colloidal composites, translating the great potential of nanoscale building bricks into macroscopic dimensions, have emerged as an appealing candidate for new materials with applications in optics, energy storage, and biomedicines. However, it remains a key challenge to bridge the size regimes from nanoscopic colloidal particles to macroscale composites possessing mechanical robustness. Herein, a bottom-up approach is demonstrated to manufacture colloidal composites with customized macroscopic forms by virtue of the co-assembly of nanosized soft polymeric micelles and hard inorganic nanoparticles. Upon association, the hairy micellar corona can bind with the hard nanoparticles, linking individual hard constituents together in a soft-hard alternating manner to form a collective entity. This permits the integration of block copolymer micelles with controlled amounts of hard nanoparticles into macroscopic colloidal composites featuring diverse internal microstructures. The resultant composites showed tunable microscale mechanical strength in a range of 90-270 MPa and macroscale mechanical strength in a range of 7-42 MPa for compression and 2-24 MPa for bending. Notably, the incorporation of soft polymeric micelles also imparts time- and temperature-dependent dynamic deformability and versatile capacity to the resulting composites, allowing their application in the low-temperature plastic processing for functional fused silica glass.

Reversibly photoswitchable protein assemblies with collagen affinity for in vivo photoacoustic imaging of tumors

Recent advancements in photoacoustic (PA) imaging have leveraged reversibly photoswitchable chromophores, known for their dual absorbance states, to enhance imaging sensitivity through differential techniques. Yet, their deployment in tumor imaging has faced obstacles in achieving targeted delivery with high efficiency and specificity. Addressing this challenge, we introduce innovative protein assemblies, DrBphP-CBD, by genetically fusing a photosensory module from Deinococcus radiodurans bacterial phytochrome (DrBphP) with a collagen-binding domain (CBD). These protein assemblies form sub-100-nanometer structures composed of 24 DrBphP dimers and 12 CBD trimers, presenting 24 protein subunits. Their affinity for collagens, combined with impressive photoswitching contrast, markedly improves PA imaging precision. In various tumor models, intravenous administration of DrBphP-CBD has demonstrated enhanced tumor targeting and retention, augmenting contrast in PA imaging by minimizing background noise. This strategy underscores the clinical potential of DrBphP-CBD as PA contrast agents, propelling photoswitchable chromoproteins to the forefront of precise cancer diagnosis.

Supramolecular assembly of polycation/mRNA nanoparticles and in vivo monocyte programming

Size-dependent phagocytosis is a well-characterized phenomenon in monocytes and macrophages. However, this size effect for preferential gene delivery to these important cell targets has not been fully exploited because commonly adopted stabilization methods for electrostatically complexed nucleic acid nanoparticles, such as PEGylation and charge repulsion, typically arrest the vehicle size below 200 nm. Here, we bridge the technical gap in scalable synthesis of larger submicron gene delivery vehicles by electrostatic self-assembly of charged nanoparticles, facilitated by a polymer structurally designed to modulate internanoparticle Coulombic and van der Waals forces. Specifically, our strategy permits controlled assembly of small poly(β-amino ester)/messenger ribonucleic acid (mRNA) nanoparticles into particles with a size that is kinetically tunable between 200 and 1,000 nm with high colloidal stability in physiological media. We found that assembled particles with an average size of 400 nm safely and most efficiently transfect monocytes following intravenous administration and mediate their differentiation into macrophages in the periphery. When a CpG adjuvant is co-loaded into the particles with an antigen mRNA, the monocytes differentiate into inflammatory dendritic cells and prime adaptive anticancer immunity in the tumor-draining lymph node. This platform technology offers a unique ligand-independent, particle-size-mediated strategy for preferential mRNA delivery and enables therapeutic paradigms via monocyte programming.

Hierarchical self-assembly of Au-nanoparticles into filaments: evolution and break

We compare the assembly of individual Au nanoparticles in a vacuum and between two Au(111) surfaces via classical molecular dynamics on a timescale of 100 ns. In a vacuum, the assembly of three nanoparticles used as seeds, initially showing decahedral, truncated octahedral and icosahedral shapes with a diameter of 1.5-1.7 nm, evolves into a spherical object with about 10-12 layers and a gyration radius ∼2.5-2.8 nm. In a vacuum, 42% show just one 5-fold symmetry axis, 33% adopt a defected icosahedral arrangement, and 25% lose all 5-fold symmetry and display a face-centred-cubic shape with several parallel stacking faults. We model a constrained version of the same assembly that takes place between two Au(111) surfaces. During the dynamics, the two Au(111) surfaces are kept fixed at distances of 55 Å, 55.5 Å, 56 Å, and 56.5 Å. The latter distance accommodates 24 Au layers with no strain, while the others correspond to nominal strains of 1.5%, 2.4%, and 3.3%, respectively. In the constrained assembly, each individual seed tends to reorganize into a layered configuration, but the filament may break. The probability of breaking the assembled nanofilament depends on the individual morphology of the seeds. It is more likely to break at the decahedron/icosahedron interface, whilst it is more likely to layer with respect to the (111) orientation when a truncated octahedron sits between the decahedron and the icosahedron. We further observe that nanofilaments between surfaces at 56 Å have a >90% probability of breaking, which decreases to 8% when the surfaces are 55 Å apart. We attribute the dramatic change in probability of breaking to the peculiar decahedron/icosahedron interface and the higher average atomic strain in the nanofilaments. This in silico experiment can shed light on the understanding and control of the formation of metallic nanowires and nanoparticle-assembled networks, which find applications in next-generation electronic devices, such as resistive random access memories and neuromorphic devices.

Dynamic Cleavage-Remodeling of Covalent Organic Networks into Multidimensional Superstructures

Superstructures with complex hierarchical spatial configurations exhibit broader structural depth than single hierarchical structures and the associated broader application prospects. However, current preparation methods are greatly constrained by cumbersome steps and harsh conditions. Here, for the first time, a concise and efficient thermally responsive dynamic synthesis strategy for the preparation of multidimensional complex superstructures within soluble covalent organic networks (SCONs) with tunable morphology from 0D hollow supraparticles to 2D films is presented. Mechanism study reveals the thermally responsive dynamic "cleavage-remodeling" characteristics of SCONs, synthesized based on the unique bilayer structure of (2.2)paracyclophane, and the temperature control facilitates the process from reversible solubility to reorganization and construction of superstructures. Specifically, during the process, the oil-water-emulsion two-phase interface can be generated through droplet jetting, leading to the preparation of 0D hollow supraparticles and other bowl-like complex superstructures with high yield. Additionally, by modulating the volatility and solubility of exogenous solvents, defect-free 2D films are prepared relying on an air-liquid interface. Expanded experiments further confirm the generalizability and scalability of the proposed dynamic "cleavage-remodeling" strategy. Research on the enrichment mechanism of guest iodine highlights the superior kinetic mass transfer performance of superstructural products compared to single-hierarchical materials.

BODIPY directed one-dimensional self-assembly of gold nanorods

The assembly of anisotropic nanomaterials into ordered structures is challenging. Nevertheless, such self-assembled systems are known to have novel physicochemical properties and the presence of a chromophore within the nanoparticle ensemble can enhance the optical properties through plasmon-molecule electronic coupling. Here, we report the end-to-end assembly of gold nanorods into micrometer-long chains using a linear diamino BODIPY derivative. The preferential binding affinity of the amino group and the steric bulkiness of BODIPY directed the longitudinal assembly of gold nanorods. As a result of the linear assembly, the BODIPY chromophores positioned themselves in the plasmonic hotspots, which resulted in efficient plasmon-molecule coupling, thereby imparting photothermal properties to the assembled nanorods. This work thus demonstrates a new approach for the linear assembly of gold nanorods resulting in a plasmon-molecule coupled system, and the synergy between self-assembly and electronic coupling resulted in an efficient system having potential biomedical applications.

Nanoparticle Superlattices Driven by Linker-Mediated Covalent Bonding Interaction

The stability of the nanoparticle superlattice (NPSL) is essential for realizing its broad spectrum of potential applications. Here, we report a linker-mediated covalent bonding interaction method for the synthesis of highly stable NPSLs. Adipic acid is used as a linker molecule which connects two Au NPs functionalized with 6-mercaptohexanol through esterification reactions in the presence of H2SO4. As-prepared NPSLs are mostly fcc Wulff polyhedra with a fairly narrow size distribution and are highly stable in solvents of different polarities and pHs (0-14) as well as in dry conditions and at temperatures as high as 175 °C. The formation of NPSLs involves random homogeneous nucleation simultaneously accompanied by growth, a gradual change of the growth mode from reaction-controlled to diffusion-controlled with time, and the oriented attachments of small crystals. The size of the NPSL can be easily tuned by the concentration of linker molecules and the reaction temperature.

Nanoparticle Superlattices with Nonequilibrium Crystal Shapes

Nanoparticle assembly is a material synthesis strategy that enables precise control of nanoscale structural features. Concepts from traditional crystal growth research have been tremendously useful in predicting and programming the unit cell symmetries of these assemblies, as their thermodynamically favored structures are often identical to atomic crystal analogues. However, these analogies have not yielded similar levels of influence in programming crystallite shapes, which are a consequence of both the thermodynamics and kinetics of crystal growth. Here, we demonstrate kinetic control of the colloidal crystal shape using nanoparticle building blocks that rapidly assemble over a broad range of concentrations, thereby producing well-defined crystal habits with symmetrically oriented dendritic protrusions and providing insight into the crystals' morphological evolution. Counterintuitively, these nonequilibrium crystal shapes actually become more common for colloidal crystals synthesized closer to equilibrium growth conditions. This deviation from typical crystal growth processes observed in atomic or molecular crystals is shown to be a function of the drastically different time scales of atomic and colloidal mass transport. Moreover, the particles are spherical with isotropic ligand grafts, and these kinetic crystal habits are achieved without the need for specifically shaped particle building blocks or external templating or shape-directing agents. Thus, this work provides generalizable design principles to expand the morphological diversity of nanoparticle superlattice crystal habits beyond the anhedral or equilibrium polyhedral shapes synthesized to date. Finally, we use this insight to synthesize crystallite shapes that have never before been observed, demonstrating the ability to both predict and program kinetically controlled superlattice morphologies.

Catalytic Gold Nanoparticle Assembly Programmed by DNAzyme Circuits

Assembled gold nanoparticle (AuNP) superstructures can generate unique physicochemical characteristics and be used in various applications, thus becoming an attractive research field. Recently, several DNA-assisted gold nanoparticle assembly methods have been rigorously developed that typically require a non-catalytic equimolar molecular assembly to guarantee the designed assembly. Although efficient and accurate, exploring such non-catalytic nanoparticle assemblies in the complex cellular milieu under low trigger concentrations remains challenging. Therefore, developing a catalytic method that facilitates gold nanoparticle assemblies with relatively low DNA trigger concentrations is desirable. In this report, a catalytic method to program gold nanoparticle assemblies by DNAzyme circuits is presented, where only a small number of DNA triggers are able to induce the production of a large number of the desired nanoparticle assemblies. The feasibility of using logic DNAzyme circuits to control catalytic nanoparticle assemblies is experimentally verified. Additionally, catalytic AuNP assembly systems are established with cascading and feedback functions. The work provides an alternative research direction to enrich the tool library of nanoparticle assembly and their application in biosensing and nanomedicine.

Physical-Chemical Coupling Coassembly Approach to Branched Magnetic Mesoporous Nanochains with Adjustable Surface Roughness

Self-assembly processes triggered by physical or chemical driving forces have been applied to fabricate hierarchical materials with subtle nanostructures. However, various physicochemical processes often interfere with each other, and their precise control has remained a great challenge. Here, in this paper, a rational synthesis of 1D magnetite-chain and mesoporous-silica-nanorod (Fe3O4&mSiO2) branched magnetic nanochains via a physical-chemical coupling coassembly approach is reported. Magnetic-field-induced assembly of magnetite Fe3O4 nanoparticles and isotropic/anisotropic assembly of mesoporous silica are coupled to obtain the delicate 1D branched magnetic mesoporous nanochains. The nanochains with a length of 2-3 µm in length are composed of aligned Fe3O4@mSiO2 nanospheres with a diameter of 150 nm and sticked-out 300 nm long mSiO2 branches. By properly coordinating the multiple assembly processes, the density and length of mSiO2 branches can well be adjusted. Because of the unique rough surface and length in correspondence to bacteria, the designed 1D Fe3O4&mSiO2 branched magnetic nanochains show strong bacterial adhesion and pressuring ability, performing bacterial inhibition over 60% at a low concentration (15 µg mL-1). This cooperative coassembly strategy deepens the understanding of the micro-nanoscale assembly process and lays a foundation for the preparation of the assembly with adjustable surface structures and the subsequent construction of complex multilevel structures.

Exfoliation of Metal-Organic Frameworks to Give 2D MOF Nanosheets for the Electrocatalytic Oxygen Evolution Reaction

The structure and properties of materials are determined by a diverse range of chemical bond formation and breaking mechanisms, which greatly motivates the development of selectively controlling the chemical bonds in order to achieve materials with specific characteristics. Here, an orientational intervening bond-breaking strategy is demonstrated for synthesizing ultrathin metal-organic framework (MOF) nanosheets through balancing the process of thermal decomposition and liquid nitrogen exfoliation. In such approach, proper thermal treatment can weaken the interlayer bond while maintaining the stability of the intralayer bond in the layered MOFs. And the following liquid nitrogen treatment results in significant deformation and stress in the layered MOFs' structure due to the instant temperature drop and drastic expansion of liquid N2, leading to the curling, detachment, and separation of the MOF layers. The produced MOF nanosheets with five cycles of treatment are primarily composed of nanosheets that are less than 10 nm in thickness. The MOF nanosheets exhibit enhanced catalytic performance in oxygen evolution reactions owing to the ultrathin thickness without capping agents which provide improved charge transfer efficiency and dense exposed active sites. This strategy underscores the significance of orientational intervention in chemical bonds to engineer innovative materials.

Growth of Nanocrystal Superlattices from Liquid Crystals

The growth of superlattices (SLs) made from self-assembled nanocrystals (NCs) is a powerful method for creating new materials and gaining insight into fundamental molecular dynamics. Previous explorations of NCSL syntheses have mostly compared them to crystallization. However, NCSL synthesis has not broadly shown cooling crystallization from saturated solutions as a reversible crystallization-dissolution process. We demonstrate the reversible growth of NCSLs by dispersing NCs in liquid crystal (LC) "smart solvents," and harnessing the transitions between the isotropic and nematic phases of the LCs. The growth mode and morphology can be tuned. This process is a model platform for studying crystallization and demonstrates great potential in manufacturing NCSLs as colloidal crystals through liquid-phase epitaxy or colloidal synthesis.

Decoding the Pathway-Dependent Self-Assembly of Polymer-Grafted Nanoparticles by Ligand Crystallization

Functional metamaterials can be constructed by assembling nanoparticles (NPs) into well-ordered structures, which show fascinating properties at different length scales. Using polymer-grafted NPs (PGNPs) as a building block, flexible composite metamaterials can be obtained, of which the structure is significantly affected by the property of polymer ligands. Here, it is demonstrated that the crystallization of polymer ligands determines the assembly behavior of NPs and reveal a pathway-dependent self-assembly of PGNPs into different metastructures in solution. By changing the crystallization degree of polymer ligands, the arrangement structure of NPs can be tailored. When the polymer ligands highly crystallize, the PGNPs assemble into diamond-shaped platelets, in which the NPs arrange disorderedly. When the polymer ligands lowly crystallize, the PGNPs assemble into highly ordered 3D superlattices, in which the NPs pack into a body-centered-cubic structure. The structure transformation of PGNP assemblies can be achieved by thermal annealing to regulate the crystallization of polymer ligands. Interestingly, the diamond-shaped platelets remain "living" for seeded epitaxial growth of newly added crystalline species. This work demonstrates the effects of ligand crystallization on the crystallization of NP, providing new insights into the structure regulation of metamaterials.

Proton-Assisted Assembly of Colloidal Nanoparticles into Wafer-Scale Monolayers in Seconds

Underwater adhesion processes in nature promise controllable assembly of functional nanoparticles for industrial mass production; However, their artificial strategies have faced challenges to uniformly transfer nanoparticles into a monolayer, particularly those below 100 nm in size, over large areas. Here a scalable "one-shot" self-limiting nanoparticle transfer technique is presented, enabling the efficient transport of nanoparticles from water in microscopic volumes to an entire 2-inch wafer in a remarkably short time of 10 seconds to reach near-maximal surface coverage (≈40%) in a 2D mono-layered fashion. Employing proton engineering in electrostatic assembly accelerates the diffusion of nanoparticles (over 50 µm2/s), resulting in a hundredfold faster coating speed than the previously reported results in the literature. This charge-sensitive process further enables "pick-and-place" nanoparticle patterning at the wafer scale, with large flexibility in surface materials, including flexible metal oxides and 3D-printed polymers. As a result, the fabrication of wafer-scale disordered plasmonic metasurfaces in seconds is successfully demonstrated. These metasurfaces exhibit consistent resonating colors across diverse material and geometrical platforms, showcasing their potential for applications in full-color painting and optical encryption devices.

Controllable synthesis of star-shaped FeCoMnOx nanocrystals and their self-assembly into superlattices with low-packing densities

We present a novel method for synthesizing monodisperse, star-shaped FeCoMnOx nanocrystals with tunable concavity. Through liquid-air interfacial assembly, these colloidal nanostars can form two-dimensional superlattices, which are characterized by low packing densities. Notably, the ability to adjust the degree of concavity of nanostars allows for the tuning of the packing symmetry of the assembled superlattices.

Multi-Scale Engineered 2D Carbon Polyhedron Array with Enhanced Electrocatalytic Performance

Electrocatalyst engineering from the atomic to macroscopic level of electrocatalysts is one of the most powerful routes to boost the performance of electrochemical devices. However, multi-scale structure engineering mainly focuses on the range of atomic-to-particle scale such as hierarchical porosity engineering, while catalyst engineering at the macroscopic level, such as the arrangement configuration of nanoparticles, is often overlooked. Here, a 2D carbon polyhedron array with a multi-scale engineered structure via facile chemical etching, ice-templating induced self-assembly, and high-temperature pyrolysis processes is reported. Controlled phytic acid etching of the carbon precursor introduces homogeneous atomic phosphorous and nitrogen doping, as well as a well-defined mesoporous structure. Subsequent ice-templated self-assembly triggers the formation of a 2D particle array superstructure. The atomic-level doping gives rise to high intrinsic activity, while the well-engineered porous structure and particle arrangement addresses the mass transport limitations at the microscopic particle level and macroscopic electrode level. As a result, the as-prepared electrocatalyst delivers outstanding performance toward oxygen reduction reaction in both acidic and alkaline media, which is better than recently reported state-of-the-art metal-free electrocatalysts. Molecular dynamics simulation together with extensive characterizations indicate that the performance enhancement originates from multi-scale structural synergy.

Molecular Dynamics Simulation Study on Self-Assembly of Polymer-Grafted Nanocrystals: From Isotropic Cores to Anisotropic Cores

The self-assembly of polymer-grafted nanocrystals (PGNCs) is an important method to manufacture novel nanomaterials. Herein, we focus on the self-assembly of three types of PGNCs with differently shaped cores including sphere, octahedron, and cube by molecular dynamics simulation. By characterizing the positional and orientational order of the assembled superlattices, we construct the phase diagrams as a function of the grafting density and polymer chain length. For PGNCs with spherical cores, we observe the transition from the FCC phase to the BCC phase due to the packing entropy of the ligand polymer chains. For PGNCs with anisotropic cores, the close-packed FCC phase is replaced by the C-BCC phase (octahedral cores) or the C-triclinic phase (cubic cores) due to the directional entropy of core shape. We also study the assembly dynamics by tracking the time evolution of the positional and orientational order. We elucidate the relationship of grafting density and polymer chain length to the packing entropy and directional entropy and reveal their important effects on assembled structures. In general, our simulation results provide useful guidelines for the programmable assembly of PGNCs.

Dynamic Nanocrystal Superlattices with Thermally Triggerable Lubricating Ligands

The size-dependent and collective physical properties of nanocrystals (NCs) and their self-assembled superlattices (SLs) enable the study of mesoscale phenomena and the design of metamaterials for a broad range of applications. However, the limited mobility of NC building blocks in dried NCSLs often hampers the potential for employing postdeposition methods to produce high-quality NCSLs. In this study, we present tailored promesogenic ligands that exhibit a lubricating property akin to thermotropic liquid crystals. The lubricating ability of ligands is thermally triggerable, allowing the dry solid NC aggregates deposited on the substrates with poor ordering to be transformed into NCSLs with high crystallinity and preferred orientations. The interplay between the dynamic behavior of NCSLs and the molecular structure of the ligands is elucidated through a comprehensive analysis of their lubricating efficacy using both experimental and simulation approaches. Coarse-grained molecular dynamic modeling suggests that a shielding layer from mesogens prevents the interdigitation of ligand tails, facilitating the sliding between outer shells and consequently enhancing the mobility of NC building blocks. The dynamic organization of NCSLs can also be triggered with high spatial resolution by laser illumination. The principles, kinetics, and utility of lubricating ligands could be generalized to unlock stimuli-responsive metamaterials from NCSLs and contribute to the fabrication of NCSLs.

Nanoparticle Assembly: From Self-Organization to Controlled Micropatterning for Enhanced Functionalities

Nanoparticles form long-range micropatterns via self-assembly or directed self-assembly with superior mechanical, electrical, optical, magnetic, chemical, and other functional properties for broad applications, such as structural supports, thermal exchangers, optoelectronics, microelectronics, and robotics. The precisely defined particle assembly at the nanoscale with simultaneously scalable patterning at the microscale is indispensable for enabling functionality and improving the performance of devices. This article provides a comprehensive review of nanoparticle assembly formed primarily via the balance of forces at the nanoscale (e.g., van der Waals, colloidal, capillary, convection, and chemical forces) and nanoparticle-template interactions (e.g., physical confinement, chemical functionalization, additive layer-upon-layer). The review commences with a general overview of nanoparticle self-assembly, with the state-of-the-art literature review and motivation. It subsequently reviews the recent progress in nanoparticle assembly without the presence of surface templates. Manufacturing techniques for surface template fabrication and their influence on nanoparticle assembly efficiency and effectiveness are then explored. The primary focus is the spatial organization and orientational preference of nanoparticles on non-templated and pre-templated surfaces in a controlled manner. Moreover, the article discusses broad applications of micropatterned surfaces, encompassing various fields. Finally, the review concludes with a summary of manufacturing methods, their limitations, and future trends in nanoparticle assembly.

3D microprinting of inorganic porous materials by chemical linking-induced solidification of nanocrystals

Three-dimensional (3D) microprinting is considered a next-generation manufacturing process for the production of microscale components; however, the narrow range of suitable materials, which include mainly polymers, is a critical issue that limits the application of this process to functional inorganic materials. Herein, we develop a generalised microscale 3D printing method for the production of purely inorganic nanocrystal-based porous materials. Our process is designed to solidify all-inorganic nanocrystals via immediate dispersibility control and surface linking-induced interconnection in the nonsolvent linker bath and thereby creates multibranched gel networks. The process works with various inorganic materials, including metals, semiconductors, magnets, oxides, and multi-materials, not requiring organic binders or stereolithographic equipment. Filaments with a diameter of sub-10 μm are printed into designed complex 3D microarchitectures, which exhibit full nanocrystal functionality and high specific surface areas as well as hierarchical porous structures. This approach provides the platform technology for designing functional inorganics-based porous materials.

Particle Network Self-Assembly of Similar Size Sub-Micron Calcium Alginate and Polystyrene Particles Atop Glass

Particle-mediated self-assembly, such as nanocomposites, microstructure formation in materials, and core-shell coating of biological particles, offers precise control over the properties of biological materials for applications in drug delivery, tissue engineering, and biosensing. The assembly of similar-sized calcium alginate (CAG) and polystyrene sub-micron particles is studied in an aqueous sodium nitrate solution as a model for particle-mediated self-assembly of biological and synthetic mixed particle species. The objective is to reinforce biological matrices by incorporating synthetic particles to form hybrid particulate networks with tailored properties. By varying the ionic strength of the suspension, the authors alter the energy barriers for particle attachment to each other and to a glass substrate that result from colloidal surface forces. The particles do not show monotonic adsorption trend to glass with ionic strength. Hence, apart from DLVO theory-van der Waals and electrostatic interactions-the authors further consider solvation and bridging interactions in the analysis of the particulate adsorption-coagulation system. CAG particles, which support lower energy barriers to attachment relative to their counterpart polystyrene particles, accumulate as dense aggregates on the glass substrate. Polystyrene particles adsorb simultaneously as detached particles. At high electrolyte concentrations, where electrostatic repulsion is largely screened, the mixture of particles covers most of the glass substrate; the CAG particles form a continuous network throughout the glass substrate with pockets of polystyrene particles. The particulate structure is correlated with the adjustable energy barriers for particle attachment in the suspension.

Size Segregation of Gold Nanoparticles into Bilayer-like Vesicular Assembly

Size segregation of nanoparticles with different sizes into highly ordered, unique nanostructures is important for their practical applications. Herein, we demonstrate spontaneous self-assembly of the binary mixtures of small and large gold nanoparticles (GNPs; 5/15, 5/20, or 10/20 in diameter) in the presence of a tetra(ethylene glycol)-terminated octafluoro-4,4'-biphenol ligand, namely, TeOFBL, resulting in a size-segregated assembly. The outer single layer of large GNPs forming a gold nanoparticle vesicle (GNV) encapsulated the inner vesicle-like assembly composed of small GNPs, which is referred to as bilayer-like GNV and similar to the molecular bilayer structure of a liposome. The size segregation was driven by the solvophobic feature of the TeOFBLs on the surface of GNPs. A time-course study indicated that size segregation occurred instantaneously during the mixing stage of the self-organization process. The size-segregated precursors quickly fused with each other through the inner-inner and outer-outer layer fashion to form the bilayer-like GNV. This study provides a new approach to creating biomimetic bilayer capsules with different physical properties for potential applications such as surface-enhanced Raman scattering and drug delivery.

Assembly and Healing: Capacitive and Conductive Plasmonic Interfacing via a Unified and Clean Wet Chemistry Route

Solution-based nanoparticle assembly represents a highly promising way to build functional metastructures based on a wealth of synthetic nanomaterial building blocks with well-controlled morphology and crystallinity. In particular, the involvement of DNA molecular programming in these bottom-up processes gradually helps the ambitious goal of customizable chemical nanofabrication. However, a fundamental challenge is to realize strong interunit coupling in an assembly toward emerging functions and applications. Herein, we present a unified and clean strategy to address this critical issue based on a H2O2-redox-driven "assembly and healing" process. This facile solution route is able to realize both capacitively coupled and conductively bridged colloidal boundaries, simply switchable by the reaction temperature, toward bottom-up nanoplasmonic engineering. In particular, such a "green" process does not cause surface contamination of nanoparticles by exogenous active metal ions or strongly passivating ligands, which, if it occurs, could obscure the intrinsic properties of as-formed structures. Accordingly, previously raised questions regarding the activities of strongly coupled plasmonic structures are clarified. The reported process is adaptable to DNA nanotechnology, offering molecular programmability of interparticle charge conductance. This work represents a new generation of methods to make strongly coupled nanoassemblies, offering great opportunities for functional colloidal technology and even metal self-healing.

Precision nanoengineering for functional self-assemblies across length scales

As nanotechnology continues to push the boundaries across disciplines, there is an increasing need for engineering nanomaterials with atomic-level precision for self-assembly across length scales, i.e., from the nanoscale to the macroscale. Although molecular self-assembly allows atomic precision, extending it beyond certain length scales presents a challenge. Therefore, the attention has turned to size and shape-controlled metal nanoparticles as building blocks for multifunctional colloidal self-assemblies. However, traditionally, metal nanoparticles suffer from polydispersity, uncontrolled aggregation, and inhomogeneous ligand distribution, resulting in heterogeneous end products. In this feature article, I will discuss how virus capsids provide clues for designing subunit-based, precise, efficient, and error-free self-assembly of colloidal molecules. The atomically precise nanoscale proteinic subunits of capsids display rigidity (conformational and structural) and patchy distribution of interacting sites. Recent experimental evidence suggests that atomically precise noble metal nanoclusters display an anisotropic distribution of ligands and patchy ligand bundles. This enables symmetry breaking, consequently offering a facile route for two-dimensional colloidal crystals, bilayers, and elastic monolayer membranes. Furthermore, inter-nanocluster interactions mediated via the ligand functional groups are versatile, offering routes for discrete supracolloidal capsids, composite cages, toroids, and macroscopic hierarchically porous frameworks. Therefore, engineered nanoparticles with atomically precise structures have the potential to overcome the limitations of molecular self-assembly and large colloidal particles. Self-assembly allows the emergence of new optical properties, mechanical strength, photothermal stability, catalytic efficiency, quantum yield, and biological properties. The self-assembled structures allow reproducible optoelectronic properties, mechanical performance, and accurate sensing. More importantly, the intrinsic properties of individual nanoclusters are retained across length scales. The atomically precise nanoparticles offer enormous potential for next-generation functional materials, optoelectronics, precision sensors, and photonic devices.

Recastable assemblies of carbon dots into mechanically robust macroscopic materials

Assembly of nanoparticles into macroscopic materials with mechanical robustness, green processability, and recastable ability is an important and challenging task in materials science and nanotechnology. As an emerging nanoparticle with superior properties, macroscopic materials assembled from carbon dots will inherit their properties and further offer collective properties; however, macroscopic materials assembled from carbon dots solely remain unexplored. Here we report macroscopic films assembled from carbon dots modified by ureido pyrimidinone. These films show tunable fluorescence inherited from carbon dots. More importantly, these films exhibit collective properties including self-healing, re-castability, and superior mechanical properties, with Young's modulus over 490 MPa and breaking strength over 30 MPa. The macroscopic films maintain original mechanical properties after several cycles of recasting. Through scratch healing and welding experiments, these films show good self-healing properties under mild conditions. Moreover, the molecular dynamics simulation reveals that the interplay of interparticle and intraparticle hydrogen bonding controls mechanical properties of macroscopic films. Notably, these films are processed into diverse shapes by an eco-friendly hydrosetting method. The methodology and results in this work shed light on the exploration of functional macroscopic materials assembled from nanoparticles and will accelerate innovative developments of nanomaterials in practical applications.

Anisotropy in Near-Spherical Colloidal Nanoparticles

Two major aspects of functional colloidal nanoparticles are their colloidal stability (dispersion) and controlled assembly of nanoparticles into ordered structures. Simplifying colloidal nanoparticles as isotropically interacting spheres is unsuitable for small nanoparticles capped with hydrocarbon chain ligands in which the ligand-ligand interaction plays a prominent role in the assembly processes. However, experimentally characterizing the ligand shell structure in solution presents significant challenges, and computer simulations yield divergent results without effective validation. Moreover, the connection between detailed information regarding ligand shell structures and interparticle interactions, in relation to the diverse dynamical behaviors of colloidal nanoparticles, remains poorly understood. In this study, we reveal the relationship between the ligand shell structures, interparticle interactions, and dynamical behaviors of few-nm-sized near-spherical nanoparticles capped with hydrocarbon chain ligands immersed in nonpolar solvents. Our study shows a transformation of the interparticle interactions from anisotropic attractions to isotropic repulsions as a result of the change in the ligand shell structures from order to disorder caused by varying temperature and other factors. The interplay between anisotropic attractions from ligand bundles and isotropic repulsions from disordered ligands dictates the nanoparticle dynamical behaviors of dispersion, uncontrolled aggregation, and controlled assembly.

Photo-Controlled Self-Assembly of Nanoparticles: A Promising Strategy for Development of Novel Structures

Photo-controlled self-assembly of nanoparticles (NPs) is an advanced and promising approach to address a series of material issues from the molecular level to the nano/micro scale, owing to the fact that light stimulus is typically precise and rapid, and can provide contactless spatial and temporal control. The traditional photo-controlled assembly of NPs is based on photochemical processes through NPs modified by photo-responsive molecules, which are realized through the change in chemical structure under irradiation. Moreover, photoexcitation-induced assembly of NPs is another promising physical strategy, and such a strategy aims to employ molecular conformational change in the excited state (rather than the chemical structure) to drive molecular motion and assembly. The exploration and control of NP assembly through such a photo-controlled strategy can open a new paradigm for scientists to deal with "bottom-up" behaviors and develop unprecedented optoelectronic functional materials.

Controlled Self-Assembly of Gold Nanotetrahedra into Quasicrystals and Complex Periodic Supracrystals

The self-assembly of shape-anisotropic nanocrystals into large-scale structures is a versatile and scalable approach to creating multifunctional materials. The tetrahedral geometry is ubiquitous in natural and manmade materials, yet regular tetrahedra present a formidable challenge in understanding their self-assembly behavior as they do not tile space. Here, we report diverse supracrystals from gold nanotetrahedra including the quasicrystal (QC) and the dimer packing predicted more than a decade ago and hitherto unknown phases. We solve the complex three-dimensional (3D) structure of the QC by a combination of electron microscopy, tomography, and synchrotron X-ray scattering. Nanotetrahedron vertex sharpness, surface ligands, and assembly conditions work in concert to regulate supracrystal structure. We also discover that the surface curvature of supracrystals can induce structural changes of the QC tiling and eventually, for small supracrystals with high curvature, stabilize a hexagonal approximant. Our findings bridge the gap between computational design and experimental realization of soft matter assemblies and demonstrate the importance of accurate control over nanocrystal attributes and the assembly conditions to realize increasingly complex nanopolyhedron supracrystals.

Dye-Doped Polymeric Microplastics: Light Tools for Bioimaging in Test Organisms

Ecosystems around the world are experiencing a major environmental impact from microplastic particles (MPs 0.1 µm-1 mm). Water, sediments, and aquatic biota show the widespread presence of this pollutant. However, MPs are rarely used in laboratory studies as they are scarcely available for purchase or expensive, especially if one wishes to trace the particle with a dye or fluorescent. Furthermore, existing preparation techniques have limited application in biological studies. In this work, we propose a new, easy, and cheap way to prepare fluorescent MPs. The protocol is based on the osmosis method in order to obtain spherical polymeric particles of P(S-co-MMA), with 0.7-9 micron diameter, made fluorescent because dye-doped with rhodamine B isothiocyanate (RITC) or fluorescein isothiocyanate (FITC). The dye loading was studied and optimized, and the MPs-dye conjugates were characterized by UV-vis FTIR and XPS spectrometry and scanning electron microscopy (SEM). Furthermore, preliminary tests on aquatic organisms demonstrated the possible use of these fluorescent MPs in bioimaging studies, showing their absorption/adsorption by duckweeds (Lemna minuta) and insect larvae (Cataclysta lemnata).

Nanoparticle Brushes: Macromolecular Ligands for Materials Synthesis

ConspectusColloidal nanoparticles have unique attributes that can be used to synthesize materials with exotic properties, but leveraging these properties requires fine control over the particles' interactions with one another and their surrounding environment. Small molecules adsorbed on a nanoparticle's surface have traditionally served as ligands to govern these interactions, providing a means of ensuring colloidal stability and dictating the particles' assembly behavior. Alternatively, nanoscience is increasingly interested in instead using macromolecular ligands that form well-defined polymer brushes, as these brushes provide a much more tailorable surface ligand with significantly greater versatility in both composition and ligand size. While initial research in this area is promising, synthesizing macromolecules that can appropriately form brush architectures remains a barrier to their more widespread use and limits understanding of the fundamental chemical and physical principles that influence brush-grafted particles' ability to form functional materials. Therefore, enhancing the capabilities of polymer-grafted nanoparticles as tools for materials synthesis requires a multidisciplinary effort, with specific focus on both developing new synthetic routes to polymer-brush-coated nanoparticles and investigating the structure-property relationships the brush enables.In this Account, we describe our recent work in developing polymer brush coatings for nanoparticles, which we use to modulate particle behavior on demand, select specific nanoscopic architectures to form, and bolster traditional bulk polymers to form stronger materials by design. Distinguished by the polymer type and capabilities, three classes of nanoparticles are discussed here: nanocomposite tectons (NCTs), which use synthetic polymers end-functionalized with supramolecular recognition groups capable of directing their assembly; programmable atom equivalents (PAEs) containing brushes of synthetic DNA that employ Watson-Crick base pairing to encode particle binding interactions; and cross-linkable nanoparticles (XNPs) that can both stabilize nanoparticles in solution and polymer matrices and subsequently form multivalent cross-links to strengthen polymer composites. We describe the formation of these brushes through "grafting-from" and "grafting-to" strategies and illustrate aspects that are important for future advancement. We also examine the new capabilities brushes provide, looking closely at dynamic polymer processes that provide control over the assembly state of particles. Finally, we provide a brief overview of the technological applications of nanoparticles with polymer brushes, focusing on the integration of nanoparticles into traditional materials and the processing of nanoparticles into bulk solids.

Monolayer supertubes of Carbon-Armored platinum nanocrystals enabling robust oxygen reduction electrocatalysis

Self-assembled superstructures composed of nanocrystals (NCs) have shown immense potential for enhancing the performance in electrocatalytic applications. However, there has been limited research on the self-assembly of platinum (Pt) into low-dimensional superstructures as efficient electrocatalysts for oxygen reduction reaction (ORR). In this study, we designed a unique tubular superstructure composed of monolayer or sub-monolayer carbon-armored platinum nanocrystals (Pt NCs) using a template-assisted epitaxial assembly approach. The organic ligands on the surface of Pt NCs were in situ carbonized, resulting in few-layer graphitic carbon shells that encapsulate Pt NCs. Due to their monolayer assembly and tubular geometry, the Pt utilization of the supertubes was 1.5 times higher than that of conventional carbon-supported Pt NCs. As a result, such Pt supertubes exhibit remarkable electrocatalytic performance for the ORR in acidic media, with a high half-wave potential of 0.918 V and a high mass activity of 181 A g^-1_Pt at 0.9 V, which are comparable to commercial carbon-supported Pt (Pt/C) catalysts. Furthermore, the Pt supertubes demonstrate robust catalytic stability, as confirmed by long-term accelerated durability tests and identical-location transmission electron microscopy. This study presents a new approach to designing Pt superstructures for highly efficient and stable electrocatalysis.