Pt Atomic Single-Layer Catalyst Embedded in Defect-Enriched Ceria for Efficient CO Oxidation

H3O+ assisted hydrogen spillover over Ru-Mo2Ti2C3 for efficient alkaline hydrogen evolution

The limited supply capacity and high transport kinetic energy barrier of H* hinder the implementation of the alkaline hydrogen evolution reaction (HER). Constructing an H3O+ environment can effectively enhance the concentration and diffusion kinetics of H*, thereby alleviating the associated limiting factors. Here we report a novel Ru nanoclusters supported by 2D Mo2Ti2C3 nanosheets (Ru-Mo2Ti2C3) as an effective HER electrocatalyst in alkaline environments. Results indicate that H* is rapidly generated at the Ru site due to the efficient water dissociation capability of Ru-Mo2Ti2C3, subsequently combining with water molecules to form H3O+. H3O+ then rapidly diffuses to the -O group on MXene, which can release H* and act as active sites for H2 evolution, facilitated by the lower migration energy barrier of H3O+. This strategy simultaneously enhances both the supply and transfer of H*, facilitating synergistic catalysis between Ru and MXene. Consequently, Ru-Mo2Ti2C3 exhibits an overpotential of 47 mV at 10 mA cm-2, lower than that observed in acidic media (108 mV). This paper introduces a new approach for the development of catalytic materials aimed at achieving efficient and pH-universal electrochemical H2 evolution.

Bionic menisci with integrated material-structure-functionality for gouty arthritis

Gouty arthritis may cause meniscal damage, necessitating surgery for meniscus replacement. However, the meniscus remains at risk of urate crystal accumulation and oxidative stress post-surgery. To tackle this challenge, we developed tri-level bionic menisci that achieve an integrated material-structure-functionality design. Its gradient network mimics natural structures, providing biomechanical adaptation and functioning as a porous catalyst carrier to load multifunctional nanozymes to eliminate excess uric acid and oxyradicals. Specifically, we utilized 3D printing to incorporate Pt-CeO2 nanozymes within the meniscus scaffold and designed a bionic structure driven by biomechanical data of the articular cavity. The Pt-CeO2 demonstrated significant catalytic efficacy in promoting the oxidation of uric acid while concurrently scavenging reactive oxygen and nitrogen species. DFT+U calculations revealed the synergistic catalytic mechanism at Pt-Ov-Ce sites. We elucidated the catalytic therapeutic mechanism of the bionic menisci. Furthermore, we developed a regulatory model capable of modulating intra-articular uric acid concentration to accommodate the varied requirements of different patients. These findings underscore the potential of the bionic menisci in personalized treatment for gouty arthritis.

Blocking the Operando Formation of Single-Atom Spectators by Interfacial Engineering

Aside from activity and selectivity, catalyst stability is a key focus in heterogeneous catalysis research. Although sintering of metal species has been considered the primary cause for deactivation of metal catalysts, our study reveals that the loss of activity at low reaction temperatures in the CeO2-supported Pt (Pt/CeO2) catalyst in complete propane oxidation is due to the dispersion of Pt ensemble sites (nanoclusters) and their subsequent operando conversion into Pt single atoms under reaction conditions. These Pt single-atom species exhibit low reactivity and act as spectators in the low-temperature reaction region. To address this issue, we engineered the surface of CeO2 by introducing NbOx, which does not directly interact with Pt. Instead, NbOx blocks the strong binding sites for Pt on CeO2, thereby preventing Pt redispersion/fragmentation and preserving reactive Pt ensembles. This strategy led to a remarkable 37-fold increase in the reaction rate compared to the Pt/CeO2 catalyst. Our findings emphasize the importance of suppressing the formation of noble metal single-atom spectators through innovative surface engineering strategy. These mechanistic insights not only advance the understanding of the materials science of Pt/CeO2 but also extend to critical technological fields such as energy conversion systems and environmental remediation technologies.

Highly Durable Rh Single Atom Catalyst Modulated by Surface Defects on Fe-Ce Oxide Solid Solution

Forming defect sites on catalyst supports and immobilizing precious metal atoms at these sites offers an efficient approach for preparing single-atom catalysts. In this study, we employed an Fe-Ce oxide solid solution (FC), which has surface oxygen that reduces more readily than that of ceria, to anchor Rh single atoms (Rh1). When utilized in the selective catalytic reduction of NO with CO (CO-SCR), Rh1/FC reduced at 500 °C-characterized by less oxidic Rh state induced by an oxygen-deficient coordination-exhibited superior activity and durability compared to Rh1/ceria and Rh1/FC reduced at 300 °C. This Rh single-atom structure was sustained after 100 hours of CO-SCR at 400 °C. Reaction intermediates formed on the catalyst surface were analyzed using in situ diffuse reflectance Fourier transform infrared spectroscopy (DRIFTS) under NO and CO flow conditions. Additionally, the catalyst structure and the CO-SCR reaction mechanism were investigated using density functional theory (DFT). While Rh atoms located near surface Fe sites were found to be thermodynamically most stable, both NO and CO preferentially adsorbed on Rh sites. Fe plays a role in stabilizing Rh sites and facilitating oxygen transfer. This work provides valuable insights into the design of highly active and durable single-atom catalysts.

Precise Size Determination of Supported Catalyst Nanoparticles via Generative AI and Scanning Transmission Electron Microscopy

Transmission electron microscopy (TEM) plays a crucial role in heterogeneous catalysis for assessing the size distribution of supported metal nanoparticles. Typically, nanoparticle size is quantified by measuring the diameter under the assumption of spherical geometry, a simplification that limits the precision needed for advancing synthesis-structure-performance relationships. Currently, there is a lack of techniques that can reliably extract more meaningful information from atomically resolved TEM images, like nuclearity or geometry. Here, cycle-consistent generative adversarial networks (CycleGANs) are explored to bridge experimental and simulated images, directly linking experimental observations with information from their underlying atomic structure. Using the versatile Pt/CeO2 (Pt particles centered ≈2 nm) catalyst synthesized by impregnation, large datasets of experimental scanning transmission electron micrographs and physical image simulations are created to train a CycleGAN. A subsequent size-estimation network is developed to determine the nuclearity of imaged nanoparticles, providing plausible estimates for ≈70% of experimentally observed particles. This automatic approach enables precise size determination of supported nanoparticle-based catalysts overcoming crystal orientation limitations of conventional techniques, promising high accuracy with sufficient training data. Tools like this are envisioned to be of great use in designing and characterizing catalytic materials with improved atomic precision.

Single-Atom Pt Loaded on MOF-Derived Porous TiO2 with Maxim-Ized Pt Atom Utilization for Selective Hydrogenation of Halonitro-benzene

The location control of single atoms relative to supports is challenging for single-atom catalysts, leading to a large proportion of inaccessible single atoms buried under supports. Herein, a "sequential thermal transition" strategy is developed to afford single-atom Pt preferentially dispersed on the outer surface of TiO2. Specifically, a Ti-MOF confining Pt nanoparticles is converted to PtNPs and TiO2 composite coated by carbon (PtNPs&TiO2@C-800) at 800 °C in N2. Subsequent thermal-driven atomization of PtNPs at 600 °C in air produce single-atom Pt decorated TiO2 (Pt1/TiO2-600). The resulting Pt1/TiO2-600 exhibits superior p-chloroaniline (p-CAN) selectivity (99 %) to PtNPs/TiO2-400 (45 %) and much better activity than Pt1@TiO2-600 with randomly dispersed Pt1 both outside and inside TiO2 in the hydrogenation of p-chloronitrobenzene (p-CNB). Mechanism investigations reveal that Pt1/TiO2-600 achieves 100 % accessibility of Pt1 and preferably adsorbs the -NO2 group of p-CNB while weakly adsorbs -Cl group of p-CNB and p-CAN, promoting catalytic activity and selectivity.

Asymmetric Pt1O4-Ov Dual Active Sites Induced by NbOx Clusters Promotes CO Synergistical Oxidation

Pt/CeO2 single-atom catalysts are attractive materials for CO oxidation but normally show poor activity below 150 °C mainly due to the unicity of the originally symmetric Pt1O4 structure. In this work, a highly active and stable Pt1/CeO2 single-site catalyst with only 0.1 wt % Pt loading, achieving a satisfied complete conversion of CO at 150 °C, can be obtained through fabricating asymmetric Pt1O4-oxygen vacancies (Ov) dual-active sites induced by well-dispersed NbOx clusters. Specifically, the formation of new Ce-O-Nb interactions weakened the strength of the original Pt-O-Ce bond, thus transferring the originally near-perfect square-planar Pt1O4 into the distorted square-planar one, along with forming abundant Ov around the Pt site. Hence, the promoted CO activation on the asymmetric Pt1O4 structure and the facilitated dissociation of the O2 on the neighboring Ov site synergistically improved the CO catalytic oxidation performance. The fabrication of such asymmetric Pt1O4-Ov double-active sites was also active for the oxidation of other typical hydrocarbons pollutants such as C7H8 and C3H6 from exhaust gases, shedding light on engineering high-efficiency Pt-based oxidation catalysts for low-temperature environmental catalysis.

Constructing SiO2-Supported Atomically Dispersed Platinum Catalysts with Single-Atom and Atomic Cluster Dual Sites to Tame Hydrogenation Performance

Construction and optimization of stable atomically dispersed metal sites on SiO2 surfaces are important yet challenging topics. In this work, we developed the amino group-assisted atomic layer deposition strategy to deposit the atomically dispersed Pt on SiO2 support for the first time, in which the particle size and ratio of Pt entities from single atom (Pt1) to atomic cluster (Pt n ) and nanoparticle (Pt p ) on the SiO2 surface were well modulated. We demonstrated the importance of dual-site synergy for optimizing the activity of single-atom catalysts. The Pt1+n /SiO2-N catalysts with the coexistence of Pt1 and Pt n showed excellent activity and optimized selectivity (99% for haloanilines) in halonitrobenzenes hydrogenation, while Pt1/SiO2-N catalysts were almost inactive in the reaction. Mechanism investigation indicates that the Pt n site is beneficial for H2 dissociation, and the Pt1 site is energetically favorable for adsorption of the nitro group to complete the selective hydrogenation, which synergistically contributes to the optimized catalytic performances. This study provides a new strategy for constructing atomically dispersed metal species over the SiO2 support and demonstrates the significance of the synergy of dual active sites for enhancing the catalytic efficiency.

Polyoxometalates-Mediated Selectivity in Pt Single-Atoms on Ceria for Environmental Catalysis

Optimizing the reactivity and selectivity of single-atom catalysts (SACs) remains a crucial yet challenging issue in heterogeneous catalysis. This study demonstrates selective catalysis facilitated by a polyoxometalates-mediated electronic interaction (PMEI) in a Pt single-atom catalyst supported on CeO2 modified with Keggin-type phosphotungstate acid (HPW), labeled as Pt1/CeO2-HPW. The PMEI effect originates from the unique arrangement of isolated Pt atoms and HPW clusters on the CeO2 support. Electrons are transferred from the ceria support to the electrophilic tungsten in HPW clusters, and subsequently, Pt atoms donate electrons to the now electron-deficient ceria. This phenomenon enhances the positive charge of Pt atoms, moderating O2 activation and limiting lattice oxygen mobility compared to the conventional Pt1/CeO2 catalyst. The resulting electronic structure of Pt combined with the strong and local acidic environment of HPW on Pt1/CeO2-HPW leads to improved efficiency and N2 selectivity in the degradation of NH3 and NO, as well as increased CO2 yield when inputting volatile organic compounds. This study sheds the light on the design of SACs with balanced reactivity and selectivity for environmental catalysis.

Designer topological-single-atom catalysts with site-specific selectivity

Designing catalysts with well-defined, identical sites that achieve site-specific selectivity, and activity remains a significant challenge. In this work, we introduce a design principle of topological-single-atom catalysts (T-SACs) guided by density functional theory (DFT) and Ab initio molecular dynamics (AIMD) calculations, where metal single atoms are arranged in asymmetric configurations that electronic shield topologically misorients d orbitals, minimizing unwanted interactions between reactants and the support surface. Mn1/CeO2 catalysts, synthesized via a charge-transfer-driven approach, demonstrate superior catalytic activity and selectivity for NOx removal. A life-cycle assessment (LCA) reveals that Mn1/CeO2 significantly reduces environmental impact compared to traditional V-W-Ti catalysts. Through in-situ spectroscopic characterizations combined with DFT calculations, we elucidate detailed reaction mechanisms. This study establishes T-SACs as a promising class of catalysts, offering a systematic framework to address catalytic challenges by defining site characteristics. The concept highlights their potential for advancing selective catalytic processes and promoting sustainable technologies.

Electric Field-Induced Synergetic Enhancement of Local Hydroxyl Concentration and Photogenerated Carrier Density for Removal of COads in Electrocatalytic Formic Acid Oxidation

Direct formic acid fuel cell (DFAFC) is an efficient power generation device, due to its high energy density, low fuel crossover and low emission. However, the anodic reaction of DFAFC, formic acid oxidation (FAOR), inevitably proceeds through an indirect pathway, adsorbing carbon monoxide intermediate (COads), resulting in a rapid decline of activity for FAOR. Therefore, effectively removing COads is the key to the development of DFAFC. In this work, Pd/CeO2 catalyst is synthesized by in situ growth of Pd nanoparticles on the hollow CeO2. Due to the difference of work function between Pd and CeO2, a built-in electric field from Pd side to CeO2 side is formed, which induces a synergistic enhancement of the photogenerated carrier density and the local high hydroxyl concentration at the Pd/CeO2 interface, thus promoting the oxidative removal of COads and significantly improving the stability of FAOR. Therefore, in photo-assisted electrocatalytic FAOR, Pd/CeO2 not only possessed high mass activity (4161.72 mA mg-1 Pd), and its mass activity decreases by only 20.1% after 40000 s chronoamperometry test, which is superior to most Pd-based catalysts. This work provides a new strategy for efficient removal of COads in FAOR through constructing built-in electric fields, which promotes the DFAFC application.

Active Interfacial Perimeter in Pt/CeO2 Catalysts with Embedding Structure for Water-Tolerant Toluene Combustion

Supported Pt catalysts are often subjected to severe deactivation under the conditions of high temperature and water vapor in catalytic oxidation; thus, the superior stability and water-resistant ability of catalysts have great significance for the effective degradation of volatile organic compounds (VOCs). Herein, we constructed a Pt/CeO2-N catalyst with an active interfacial perimeter, in which Pt species were partially embedded in the defective CeO2-N support to prevent the sintering. A significant charge transfer between Pt species and ceria in the embedding structure occurred via the Pt-CeO2 interface, which induced the formation of a Pt4+-Ov-Ce3+ interfacial structure. Experimental research and theoretical calculations demonstrated that the active Pt4+-Ov-Ce3+ interface promoted the activation and migration of lattice oxygen, thus facilitating the participation of oxygen species in toluene oxidation. Consequently, Pt/CeO2-N showed excellent catalytic performance for toluene degradation. In situ DRIFTS and DFT calculation proved that the Pt4+-Ov-Ce3+ interfacial sites served as the intrinsic active center in the dissociation of H2O to generate ·OH, which contributed to the formation of benzaldehyde, thus remarkably improving the water-resistant property. This study provided a facile strategy for fabricating the interfacial embedding structure to enhance the catalytic activity and water tolerance for eliminating VOCs in practical application.

Operando elucidation of hydrogen production mechanisms on sub-nanometric high-entropy metallenes

Precise morphological control and identification of structure-property relationships pose formidable challenges for high-entropy alloys, severely limiting their rational design and application in multistep and tandem reactions. Herein, we report the synthesis of sub-nanometric high-entropy metallenes with up to eight metallic elements via a one-pot wet-chemical approach. The PdRhMoFeMn high-entropy metallenes exhibit high electrocatalytic hydrogen evolution performances with 6, 23, and 26 mV overpotentials at -10 mA cm-2 in acidic, neutral, and alkaline media, respectively, and high stability. The electrochemical measurements, theoretical simulations, and operando X-ray absorption spectroscopy reveal the actual active sites along with their dynamics and synergistic mechanisms in various electrolytes. Specially, Mn sites have strong binding affinity to hydroxyl groups, which enhances the water dissociation process at Pd sites with low energy barrier while Rh sites with optimal hydrogen adsorption free energy accelerate hydride coupling, thereby markedly boosting its intrinsic ability for hydrogen production.

Exploring the Facet-Dependent Structural Evolution of Pt/CeO2 Catalysts Induced by Typical Pretreatments for CO Oxidation

Atomic-scale insights into the interactions between metals and supports play a crucial role in optimizing catalyst design, understanding catalytic mechanisms, and enhancing chemical conversion processes. The effects of oxide support on the dynamic behavior of supported metal species during pretreatments or reactions have been attracting a lot of attention; however, very less systematic integrations are carried out experimentally using real catalysts. In this study, we here utilized facet-controlled CeO2 as examples to explore their influence on the supported Pt species (1.0 wt %) during the reducing and oxidizing pretreatments that are typically applied in heterogeneous catalysts. By employing a combination of microscopy, spectroscopy, and first-principles calculations, it is demonstrated that the exposed crystal facets of CeO2 govern the evolution behavior of supported Pt species under different environmental conditions. This leads to distinct local coordinations and charge states of the Pt species, which directly influence the catalytic reactivity and can be leveraged to control the catalytic performance for CO oxidation reactions.

Facet-Dependent Diversity of Pt-O Coordination for Pt1/CeO2 Catalysts Achieved by Oriented Atomic Deposition

The surface chemistry of CeO2 is dictated by the well-defined facets, which exert great influence on the supported metal species and the catalytic performance. Here we report Pt1/CeO2 catalysts exhibiting specific structures of Pt-O coordination on different facets by using adequate preparation methods. The simple impregnation method results in Pt-O3 coordination on the predominantly exposed {111} facets, while the photo-deposition method achieves oriented atomic deposition for Pt-O4 coordination into the "nano-pocket" structure of {100} facets at the top. Compared to the impregnated Pt1/CeO2 catalyst showing normal redox properties and low-temperature activity for CO oxidation, the photo-deposited Pt1/CeO2 exhibits uncustomary strong metal-support interaction and extraordinary high-temperature stability. The preparation methods dictate the facet-dependent diversity of Pt-O coordination, resulting in the further activity-selectivity trade-off. By applying specific preparation routes, our work provides an example of disentangling the effects of support facets and coordination environments for nano-catalysts.

Preparation and application of single-atom nanozymes in oncology: a review

Single-atom nanozymes (SAzymes) represent a cutting-edge advancement in nanomaterials, merging the high catalytic efficiency of natural enzymes with the benefits of atomic economy. Traditionally, natural enzymes exhibit high specificity and efficiency, but their stability are limited by environmental conditions and production costs. Here we show that SAzymes, with their large specific surface area and high atomic utilization, achieve superior catalytic activity. However, their high dispersibility poses stability challenges. Our review focuses on recent structural and preparative advancements aimed at enhancing the catalytic specificity and stability of SAzymes. Compared to previous nanozymes, SAzymes demonstrate significantly improved performance in biomedical applications, particularly in tumor medicine. This progress positions SAzymes as a promising tool for future cancer treatment strategies, integrating the robustness of inorganic materials with the specificity of biological systems. The development and application of SAzymes could revolutionize the field of biocatalysis, offering a stable, cost-effective alternative to natural enzymes.

Simultaneously activating molecular oxygen and surface lattice oxygen on Pt/TiO2 for low-temperature CO oxidation

Developing high-performance Pt-based catalysts with low Pt loading is crucial but challenging for CO oxidation at temperatures below 100 °C. Herein, we report a Pt-based catalyst with only a 0.15 wt% Pt loading, which consists of Pt-Ti intermetallic single-atom alloy (ISAA) and Pt nanoparticles (NP) co-supported on a defective TiO2 support, achieving a record high turnover frequency of 11.59 s-1 at 80 °C and complete conversion of CO at 120 °C. This is because the coexistence of Pt-Ti ISAA and Pt NP significantly alleviates the competitive adsorption of CO and O2, enhancing the activation of O2. Furthermore, Pt single atom sites are stabilized by Pt-Ti ISAA, resulting in distortion of the TiO2 lattice within Pt-Ti ISAA. This distortion activates the neighboring surface lattice oxygen, allowing for the simultaneous occurrence of the Mars-van Krevelen and Langmuir-Hinshelwood reaction paths at low temperatures.

Improvement in ORR Durability of Fe Single-Atom Carbon Catalysts Hybridized with CeO2 Nanozyme

FeNC catalysts are considered one of the most promising alternatives to platinum group metals for the oxygen reduction reaction (ORR). Despite the extensive research on improving ORR activity, the undesirable durability of FeNC is still a critical issue for its practical application. Herein, inspired by the antioxidant mechanism of natural enzymes, CeO2 nanozymes featuring catalase-like and superoxide dismutase-like activities were coupled with FeNC to mitigate the attack of reactive oxygen species (ROS) for improving durability. Benefiting from the multienzyme-like activities of CeO2, ROS generated from FeNC is instantaneously eliminated to alleviate the corrosion of carbon and demetallization of metal sites. Consequently, FeNC/CeO2 exhibits better ORR durability with a decay of only 5 mV compared to FeNC (18 mV) in neutral electrolyte after 10k cycles. The FeNC/CeO2-based zinc-air battery also shows minimal voltage decay over 140 h in galvanostatic discharge-charge cycling tests, outperforming FeNC and commercial Pt/C.

Real-Space Pseudopotential Method for the Calculation of Third-Row Elements X-ray Photoelectron Spectroscopic Signatures

X-ray photoelectron spectroscopy (XPS) is a powerful characterization technique that unveils subtle chemical environment differences via core-electron binding energy (CEBE) analysis. We extend the development of real-space pseudopotential methods to calculating 1s, 2s, and 2p3/2 CEBEs of third-row elements (S, P, and Si) within the framework of Kohn-Sham density-functional theory (KS-DFT). The new approach systematically prevents variational collapse and simplifies core-excited orbital selection within dense energy level distributions. However, careful error cancellation analysis is required to achieve accuracy comparable to all-electron methods and experiments. Combined with real-space KS-DFT implementation, this development enables large-scale simulations with both Dirichlet boundary conditions and periodic boundary conditions.

Enhancing the Carbon Monoxide Oxidation Performance through Surface Defect Enrichment of Ceria-Based Supports for Platinum Catalyst

Effective synthesis and application of single-atom catalysts on supports lacking enough defects remain a significant challenge in environmental catalysis. Herein, we present a universal defect-enrichment strategy to increase the surface defects of CeO2-based supports through H2 reduction pretreatment. The Pt catalysts supported by defective CeO2-based supports, including CeO2, CeZrOx, and CeO2/Al2O3 (CA), exhibit much higher Pt dispersion and CO oxidation activity upon reduction activation compared to their counterpart catalysts without defect enrichment. Specifically, Pt is present as embedded single atoms on the CA support with enriched surface defects (CA-HD) based on which the highly active catalyst showing embedded Pt clusters (PtC) with the bottom layer of Pt atoms substituting the Ce cations in the CeO2 surface lattice can be obtained through reduction activation. Embedded PtC can better facilitate CO adsorption and promote O2 activation at PtC-CeO2 interfaces, thereby contributing to the superior low-temperature CO oxidation activity of the Pt/CA-HD catalyst after activation.

Enrooted-Type Metal-Support Interaction Boosting Oxygen Evolution Reaction in Acidic Media

Supported metal catalysts with appropriate metal-support interactions (MSIs) hold a great promise for heterogeneous catalysis. However, ensuring tight immobilization of metal clusters/nanoparticles on the support while maximizing the exposure of surface active sites remains a huge challenge. Herein, we report an Ir/WO3 catalyst with a new enrooted-type MSI in which Ir clusters are, unprecedentedly, atomically enrooted into the WO3 lattice. The enrooted Ir atoms decrease the electron density of the constructed interface compared to the adhered (root-free) type, thereby achieving appropriate adsorption toward oxygen intermediates, ultimately leading to high activity and stability for oxygen evolution in acidic media. Importantly, this work provides a new enrooted-type supported metal catalyst, which endows suitable MSI and maximizes the exposure of surface active sites in contrast to the conventional adhered, embedded, and encapsulated types.

Unraveling distinct effects between CuOx and PtCu alloy sites in Pt-Cu bimetallic catalysts for CO oxidation at different temperatures

In situ exploration of the dynamic structure evolution of catalysts plays a key role in revealing reaction mechanisms and designing efficient catalysts. In this work, PtCu/MgO catalysts, synthesized via the co-impregnation method, outperforms monometallic Pt/MgO and Cu/MgO. Utilizing quasi/in-situ characterization techniques, it is discovered that there is an obvious structural evolution over PtCu/MgO from PtxCuyOz oxide cluster to PtCu alloy with surface CuOx species under different redox and CO oxidation reaction conditions. The synergistic effect between PtCu alloy and CuOx species enables good CO oxidation activity through the regulation of CO adsorption and O2 dissociation. At low temperatures, CO oxidation is predominantly catalyzed by surface CuOx species via the Mars-van Krevelen mechanism, in which CuOx can provide abundant active oxygen species. As the reaction temperature increases, both surface CuOx species and PtCu alloy collaborate to activate gaseous oxygen, facilitating CO oxidation mainly through the Langmuir-Hinshelwood mechanism.

Catalytic CO Oxidation on the Cu+-Ov-Ce3+ Interface Constructed by an Electrospinning Method for Enhanced CO Adsorption at Low Temperature

It is crucial to eliminate CO emissions using non-noble catalysts. Cu-based catalysts have been widely applied in CO oxidation, but their activity and stability at low temperatures are still challenging. This study reports the preparation and application of an efficient copper-doped ceria electrospun fiber catalyst prepared by a facile electrospinning method. The obtained 10Cu-Ce fiber catalyst achieved complete CO oxidation at a temperature as low as 90 °C. However, a reference 10Cu/Ce catalyst prepared by the impregnation method needed 110 °C to achieve complete CO oxidation under identical reaction conditions. Asymmetric oxygen vacancies (ASOV) at the interface between copper and cerium were constructed, to effectively absorb gas molecules involved in the reaction, leading to the enhanced oxidation of CO. The exceptional ability of the 10Cu-Ce catalyst to adsorb CO is attributed to its unique structure and surface interaction phase Cu+-Ov-Ce3+, as demonstrated by a series of characterizations and DFT calculations. This novel approach of using electrospinning offers a promising technique for developing low-temperature and non-noble metal-based catalysts.

Epitaxial Ultrathin Pt Atomic Layers on CrN Nanoparticle Catalysts

The construction of platinum (Pt) atomic layers is an effective strategy to improve the utilization efficiency of Pt atoms in electrocatalysis, thus is important for reducing the capital costs of a wide range of energy storage and conversion devices. However, the substrates used to grow Pt atomic layers are largely limited to noble metals and their alloys, which is not conducive to reducing catalyst costs. Herein, low-cost chromium nitride (CrN) is utilized as a support for the loading of epitaxial ultrathin Pt atomic layers via a simple thermal ammonolysis method. Owing to the strong anchoring and electronic regulation of Pt atomic layers by CrN, the obtained Pt atomic layers catalyst (containing electron-deficient Pt sites) exhibits excellent activity and endurance for the formic acid oxidation reaction, with a mass activity of 5.17 A mgPt -1 that is 13.6 times higher than that of commercial Pt/C catalyst. This novel strategy demonstrates that CrN can replace noble metals as a low-cost substrate for constructing Pt atomic layers catalysts.

Pd-CeO2 catalyst facilely derived from one-pot generated Pd@Ce-BTC for low temperature CO oxidation

Due to the capacity to offer abundant catalytic sites within porous solids featuring high surface areas, metal-organic frameworks (MOFs) and their derivatives have garnered considerable attention as prospective catalysts in environmental catalysis. To promote the industrial application of MOFs, there is an urgent need for an effective and environmental-friendly preparation approach. Breaking through the limitation of the traditional two-step preparation method that Pd was introduced to the already prepared Ce-BTC (Pd/Ce-BTC, BTC = 1, 3, 5 benzenetricarboxylate), in this work, we present a novel one-pot solvothermal method for synthesizing the Pd material supported by Ce-BTC (Pd@Ce-BTC). After pyrolysis in N2 flow or air flow, Pd-CeO2 catalysts derived from Pd@Ce-BTC exhibited much higher CO oxidation activity than those from Pd/Ce-BTC. Moreover, Pd/Ce-BTC and Pd@Ce-BTC pyrolyzed in N2 flow (Pd/Ce-BTC-N and Pd@Ce-BTC-N) could better catalyze the oxidation of CO than Pd/Ce-BTC and Pd@Ce-BTC pyrolyzed in air flow (Pd/Ce-BTC-A and Pd@Ce-BTC-A). Further characterizations revealed that the abundant surface Ce3+ species, rich surface adsorbed oxygen species and superior redox properties were the main reasons for the superior CO oxidation activity of Pd@Ce-BTC-N.

Highly Stable Pt/CeO2 Catalyst with Embedding Structure toward Water-Gas Shift Reaction

Strong metal-support interaction (SMSI) has been extensively studied in heterogeneous catalysis because of its significance in stabilizing active metals and tuning catalytic performance, but the origin of SMSI is not fully revealed. Herein, by using Pt/CeO2 as a model catalyst, we report an embedding structure at the interface between Pt and (110) plane of CeO2, where Pt clusters (∼1.6 nm) are embedded into the lattice of ceria within 3-4 atomic layers. In contrast, this phenomenon is absent in the CeO2(100) support. This unique geometric structure, as an effective motivator, triggers more significant electron transfer from Pt clusters to CeO2(110) support accompanied by the formation of interfacial structure (Ptδ+-Ov-Ce3+), which plays a crucial role in stabilizing Pt nanoclusters. A comprehensive investigation based on experimental studies and theoretical calculations substantiates that the interfacial sites serve as the intrinsic active center toward water-gas shift reaction (WGSR), featuring a moderate strength CO activation adsorption and largely decreased energy barrier of H2O dissociation, accounting for the prominent catalytic activity of Pt/CeO2(110) (a reaction rate of 15.76 molCO gPt-1 h-1 and a turnover frequency value of 2.19 s-1 at 250 °C). In addition, the Pt/CeO2(110) catalyst shows a prominent durability within a 120 h time-on-stream test, far outperforming the Pt/CeO2(100) one, which demonstrates the advantages of this embedding structure for improving catalyst stability.

Defects Healing of the ZnO Surface by Filling with Au Atom Catalysts for Efficient Photocatalytic H2 Production

Healed defects on photocatalysts surface and their interaction with plasmonic nanoparticles (NPs) have attracted attention in H2 production process. In this study, surface oxygen vacancy (Vo ) defects are created on ZnO (Vo -ZnO) NPs by directly pyrolyzing zeolitic imidazolate framework. The surface defects on Vo -ZnO provide active sites for the diffusion of single Au atoms and as nucleation sites for the formation of Au NPs by the in situ photodeposition process. The electronically healed surface defects by single Au atoms help in the formation of a heterojunction between the ZnO and plasmonic Au NPs. The formed Au/Vo -Au:ZnO-4 heterojunction prolongs photoelectron lifetimes and increases donor charge density. Therefore, the optimized photocatalysts of Au/Vo -Au:ZnO-4 has 21.28 times higher H2 production rate than the pristine Vo -ZnO under UV-visible light in 0.35 m Na2 SO4 and 0.25 m Na2 SO3 . However in 0.35 m Na2 S and 0.25 m Na2 SO3 , the H2 production rate is 25.84 mmole h-1 g-1 . Furthermore, Au/Vo -Au:ZnO-4 shows visible light activity by generating hot carries via induced surface plasmonic effects. It has 48.58 times higher H2 production rate than pristine Vo -ZnO. Therefore, this study infers new insight for defect healing mediated preparation of Au/Vo -Au:ZnO heterojunction for efficient photocatalytic H2 production.

Support-facet-dependent morphology of small Pt particles on ceria

Direct atomic scale information on how the structure of supported nanoparticles is affected by the metal-support interaction is rare. Using scanning transmission electron microscopy, we provide direct evidence of a facet-dependent support interaction for Pt nanoparticles on CeO2, governing the dimensionality of small platinum particles. Our findings indicate that particles consisting of less than ∼130 atoms prefer a 3D shape on CeO2(111) facets, while 2D raft structures are favored on CeO2(100) facets. Measurements of stationary particles on both surface facets are supplemented by time resolved measurements following a single particle with atomic resolution as it migrates from CeO2(111) to CeO2(100), undergoing a dimensionality change from 3D to 2D. The intricate transformation mechanism reveals how the 3D particle disassembles and completely wets a neighboring CeO2(100) facet. Density functional theory calculations confirm the structure-trend and reveal the thermodynamic driving force for the migration of small particles. Knowledge of the presented metal-support interactions is crucial to establish structure-function relationships in a range of applications based on supported nanostructures.

Catalyzing Generation and Stabilization of Oxygen Vacancies on CeO2-x Nanorods by Pt Nanoclusters as Nanozymes for Catalytic Therapy

Although CeO2 nanomaterials have been widely explored as nanozymes for catalytic therapy, they still suffer from relatively low activities. Herein, the catalyzing generation and stabilization of oxygen vacancies on CeO2 nanorods by Pt nanoclusters via H2 gas reduction under mild temperature (350 °C) to obtain Pt/CeO2- x , which can serve as a highly efficient nanozyme for catalytic cancer therapy, is reported. The deposited Pt on CeO2 by the atomic layer deposition technique not only can serve as the catalyst to generate oxygen vacancies under mild temperature reduction through the hydrogen spillover effect, but also can stabilize the generated oxygen vacancies. Meanwhile, the oxygen vacancies also provide anchoring sites for Pt forming strong metal-support interactions and thus preventing their agglomerations. Importantly, the Pt/CeO2- x reduced at 350 °C (Pt/CeO2- x -350R) exhibits excellent enzyme-mimicking catalytic activity for generation of reactive oxygen species (e.g., ·OH) as compared to other control samples, including CeO2 , Pt/CeO2 , and Pt/CeO2- x reduced at other temperatures, thus achieving excellent performance for tumor-specific catalytic therapy to efficiently eliminate cancer cells in vitro and ablate tumors in vivo. The excellent enzyme-mimicking catalytic activity of Pt/CeO2- x -350R originates from the good catalytic activities of oxygen vacancy-rich CeO2- x and Pt nanoclusters.

Tuning the Interaction between Platinum Single Atoms and Ceria by Zirconia Doping for Efficient Catalytic Ammonia Oxidation

Aiming at the development of an efficient NH3 oxidation catalyst to eliminate the harmful NH3 slip from the stationary flue gas denitrification system and diesel exhaust aftertreatment system, a facile ZrO2 doping strategy was proposed to construct Pt1/CexZr1-xO2 catalysts with a tunable Pt-CeO2 interaction strength and Pt-O-Ce coordination environment. According to the results of systematic characterizations, Pt species supported on CexZr1-xO2 were mainly in the form of single atoms when x ≥ 0.7, and the strength of the Pt-CeO2 interaction and the coordination number of Pt-O-Ce bond (CNPt-O-Ce) on Pt1/CexZr1-xO2 showed a volcanic change as a function of the ZrO2 doping amount. It was proposed that the balance between the reasonable concentration of oxygen defects and limited surface Zr-Ox species well accounted for the strongest Pt-CeO2 interaction and the highest CNPt-O-Ce on Pt/Ce0.9Zr0.1O2. It was observed that the Pt/Ce0.9Zr0.1O2 catalyst exhibited much higher NH3 oxidation activity than other Pt/CexZr1-xO2 catalysts. The mechanism study revealed that the Pt1 species with the stronger Pt-CeO2 interaction and higher CNPt-O-Ce within Pt/Ce0.9Zr0.1O2 could better activate NH3 adsorbed on Lewis acid sites to react with O2 thus resulting in superior NH3 oxidation activity. This work provides a new approach for designing highly efficient Pt/CeO2 based catalysts for low-temperature NH3 oxidation.

Single-atom Zr embedded Ti4O7 anode coupling with hierarchical CuFe2O4 particle electrodes toward efficient electrooxidation of actual pharmaceutical wastewater

Electrocatalytic oxidation is commonly restricted by low degradation efficiency, slow mass transfer, and high energy consumption. Herein, a synergetic electrocatalysis system was developed for removal of various drugs, i.e., atenolol, florfenicol, and diclofenac sodium, as well as actual pharmaceutical wastewater, where the newly-designed single-atom Zr embedded Ti4O7 (Zr/Ti4O7) and hierarchical CuFe2O4 (CFO) microspheres were used as anode and microelectrodes, respectively. In the optimal reaction system, the degradation efficiencies of 40 mg L-1 atenolol, florfenicol, and diclofenac sodium could achieve up to 98.8%, 93.4%, and 85.5% in 120 min with 0.1 g L-1 CFO at current density of 25 mA cm-2. More importantly, in the flow-through reactor, the electrooxidation lasting for 150 min could reduce the COD of actual pharmaceutical wastewater from 432 to 88.6 mg L-1, with a lower energy consumption (25.67 kWh/m3). Meanwhile, the electrooxidation system maintained superior stability and environmental adaptability. DFT theory calculations revealed that the excellent performance of this electrooxidation system could be ascribed to the striking features of the reduced reaction energy barrier by single-atom Zr loading and abundant oxygen vacancies on the Zr/Ti4O7 surface. Moreover, the characterization and experimental results demonstrated that the CFO unique hierarchical structure and synergistic effect between electrodes were also the important factors that could improve the system performance. The findings shed light on the single-atom material design for boosting electrochemical oxidation performance.

Does Cluster Encapsulation Inhibit Sintering? Stabilization of Size-Selected Pt Clusters on Fe3O4(001) by SMSI

The metastability of supported metal nanoparticles limits their application in heterogeneous catalysis at elevated temperatures due to their tendency to sinter. One strategy to overcome these thermodynamic limits on reducible oxide supports is encapsulation via strong metal-support interaction (SMSI). While annealing-induced encapsulation is a well-explored phenomenon for extended nanoparticles, it is as yet unknown whether the same mechanisms hold for subnanometer clusters, where concomitant sintering and alloying might play a significant role. In this article, we explore the encapsulation and stability of size-selected Pt5, Pt10, and Pt19 clusters deposited on Fe3O4(001). In a multimodal approach using temperature-programmed desorption (TPD), X-ray photoelectron spectroscopy (XPS), and scanning tunneling microscopy (STM), we demonstrate that SMSI indeed leads to the formation of a defective, FeO-like conglomerate encapsulating the clusters. By stepwise annealing up to 1023 K, we observe the succession of encapsulation, cluster coalescence, and Ostwald ripening, resulting in square-shaped crystalline Pt particles, independent of the initial cluster size. The respective sintering onset temperatures scale with the cluster footprint and thus size. Remarkably, while small encapsulated clusters can still diffuse as a whole, atom detachment and thus Ostwald ripening are successfully suppressed up to 823 K, i.e., 200 K above the Hüttig temperature that indicates the thermodynamic stability limit.