Pushing Adenosine and ATP SELEX for DNA Aptamers with Nanomolar Affinity

Experimentally verified flexible molecular docking and dynamic simulation of aptamer with intracellular proteins based on direct DNA 3D structure prediction

Despite the rising spotlight on biotargeting aptamers, their mechanism of regulating cellular functions remained elusive due to lack of systematic method to investigate their intracellular behavior. This study systematically established a complete workflow including DNA secondary and 3D structure prediction, flexibilization, docking, experimental validation, and molecular dynamic (MD) simulation. RNAfold was demonstrated to provide more accurate ssDNA secondary structure predictions and compatibility for flexible docking. Feasibility of a novel direct prediction tool of DNA 3D structure, 3dDNA, has first been proven with similar reliability and better data stability in flexible docking compared to indirect prediction by RNAComposer. Flexible docking by AutoDock Vina exhibited higher reliability, while rigid docking was less reliable. Docking results were influenced by secondary and 3D structures, but the proteins' inherent affinity to nucleic acids was the key determinant. Aptamer bound to proteins with non-specificity (KD > 100 nM) and affinities (Rmax) exponentially correlated to flexible docking scores, necessitating further MD validation and identification of binding sites. Via the established workflow, binding sites of stem cell-recruiting aptamer Apt-19s on its known target (ALPL) was identified, Sec24B was first screened as its potential intracellular targets, providing theoretical guidance and feasible methodology for future exploration of aptamer biotargeting mechanisms.

A Fluorescent Aptasensor for Sensitive and Selective Determination of Epigenetic Cancer Biomarker N1-Methyladenosine in Urine Samples

N1-methyladenosine (m1A) level in urine increases in the presence of cancer and is associated with the tumor size and stage. In the present study, we aimed to develop a method for rapid, sensitive and accurate determination of m1A in urine samples. The capture systematic evolution of ligands by exponential enrichment (SELEX) method was used to isolate aptamers that could selectively bind to m1A. We successfully isolated two sequences that have high selectivity toward m1A. The affinities against m1A were determined by isothermal titration calorimetry (ITC) and thioflavin T (ThT) assays. The N1MA1a aptamer has a Kd of 1.9±0.1 µm determined by the ThT assay and 0.75±0.04 µm determined by ITC. A strand-displacement biosensor was designed by labeling the aptamer with a carboxy fluorescein (FAM) and hybridizing it with a quencher-labeled complementary DNA strand. Using this biosensing system, m1A was detected with a detection limit of 1.9 µm. The system shows high selectivity to m1A and high tolerance to adenosine, cytidine, guanosine, thymidine, uridine and N6-methyladenosine (m6A) as well as urine constituents at their real levels in urine. The sensor has been applied to five different human urine samples showing quantitative recovery values, which indicates practical potential of this aptamer-based biosensor.

Highly selective DNA aptamer sensor for intracellular detection of coenzyme A

Detecting Coenzyme A (CoA) in cells is vital for understanding its role in metabolism. DNA aptamers, though widely used for monitoring many other molecules, have not been effective for CoA detection, as previous attempts at obtaining DNA aptamers for CoA using SELEX resulted in aptamers that only recognize the adenine moiety of CoA. This "tyranny" of adenine dominating in SELEX has, therefore, hampered the SELEX of aptamers specific for CoA. To meet this challenge, we employed a capture SELEX method by incorporating rigorous counter selections against adenine, adenosine, ATP, pantetheine, and pantothenic acid, resulting in a highly specific DNA aptamer for CoA over adenosine, ATP and other related metabolites such as NADH, with a dissociation constant of 48.9 μM. This aptamer was then converted to a fluorescent sensor for CoA across pH 6.4-8.0. Confocal microscopy showed its ability to visualize CoA in living cells, with fluorescence changes observed upon manipulating CoA levels. This method broadens SELEX's application and presents a promising approach for studying and understanding CoA dynamics.

Increasing Aptamer Affinity from Millimolar to Nanomolar by Forming a Covalent Adduct for Detecting Acrylamide

Being a neurotoxin and carcinogen, acrylamide has been an important target for developing biosensors. DNA aptamers are attractive for making biosensors due to their programmable structure, low cost, and ease of modification. However, DNA aptamers have poor affinities to low-binding epitope target molecules such as acrylamide. In this work, an aptamer for acrylamide was isolated with an apparent Kd of 10.5 mM using a thioflavin T fluorescence assay and 4.7 mM using the fluorescence strand-displacement assay. To improve binding affinity, acrylamide was reacted with xanthydrol to form a covalent adduct, and a new aptamer selected for this adduct achieved a Kd of 20 nM using the strand-displacement assay, representing an improvement of 235,000-fold. Using the strand-displacement biosensor, a limit of detection of 4.2 nM was achieved for the adduct. This work demonstrates a practical route to convert low epitope targets to high-affinity targets for aptamer binding and bioanalytical applications.

Bioinspired Nucleic Acid-Based Bandpass Filters and Their Concentration-Adaptive Functions

Natural signaling networks can act as bandpass filters to interpret external stimuli within defined concentration ranges for differential cellular activities. Replicating such a bandpass filtering mechanism by synthetic networks poses a significant challenge. Herein, we introduce a modular design of nucleic acid-based multilayer threshold-gated incoherent feedforward networks as multiband bandpass filters to produce mutually exclusive responses within defined input concentration ranges. In these networks, nucleic acids demonstrate triple functionality by acting as threshold-gated entities to discern input concentration levels, serving as network nodes to assemble incoherent feedforward loops for nonlinear signal processing, and functioning as signal transduction units for coupling downstream functional modules. These modular networks enable the fine-tuning of filtering performance in terms of band position, bandwidth, cascades, and responses. A mathematical simulation model allows us to predict the filtering behaviors under various conditions. Also, the networks are integrated with upstream signal conversion modules to process concentration information on molecules beyond nucleic acids, such as adenosine and its derivatives. Furthermore, connections to downstream functional modules allow the system to regulate various processes in a concentration bandpass manner, realizing concentration-adaptive DNAzyme biocatalysis, tristate logic operations, RNA transcription, and DNA condensate formation. These findings underscore the potential of enzyme-free DNA reaction networks in complex signal processing and lay a solid foundation for developing chemical and material systems with highly adaptive and autonomous behaviors.

A Generalizable Screening Platform for Developing Functional Aptasensors

Aptamers are versatile sensing elements for the construction of biosensors. A common approach for signal generation in "aptasensors" involves the displacement of short complementary "probes" resulting from conformational changes upon aptamer-target binding. However, designing strands that rapidly and completely displace when the target binds is nontrivial. Typically, probes are discovered through a lengthy process of screening several potential sequences. Here, we explored properties governing probe displacement efficiency using a well-characterized aptamer for the agricultural contaminant ochratoxin A (OTA). Surprisingly, the length, probe affinity, and melting temperature did not correlate with probe displacement efficiency. We therefore developed a novel surface plasmon resonance (SPR) assay to rapidly measure target-induced displacement of probes from aptamers. Fitted displacement results from the SPR assay were correlated with fast proportional fluorescence recovery from quencher-labeled probe displacement. This new method allows for the rapid distinction of efficient probes, resulting in sensitive biosensing of OTA. Finally, we demonstrated our new method is adaptable to diverse aptamers, offering a generally applicable method to improve probe design and accelerate aptasensor development.

Nanopore Detection of Small Molecules Based on Replacement and Complexation Chemical Interactions

Small molecules play important roles in a variety of biological processes such as metabolism, cell signaling and enzyme regulation, and can serve as valuable biomarkers for human diseases. Moreover, they are essential to drug discovery and development, and are important targets for environmental monitoring and food safety. Due to the size incompatibility, small molecule transport is difficult to be monitored with a nanopore. A popular strategy for nanopore detection of small molecules is to introduce a molecular probe as a ligand (or recognition element) and rely on their effect on the ligand transport. One limitation for this sensing strategy is that the probe molecule needs to have a slightly smaller size than the nanopore constriction or can be easily unfolded or unzipped through the pore. Herein, by taking advantage of replacement and complexation chemical interactions, a generic approach is reported for detection of small molecules by using large biomolecules with well-defined stable 3D structures such as aptamers as recognition elements. Given the versatile use of aptamers as capture agents for a wide variety of species, the developed nanopore sensing strategy should find applications in many fields.

Exploring the relationship between aptamer binding thermodynamics, affinity, and specificity

Aptamers are oligonucleotide-based bioreceptors that are selected in vitro from randomized libraries to bind specific molecules with high affinity, and are proving popular for applications in diagnostics, bioimaging, and therapeutics. A better understanding of aptamer-ligand interactions could facilitate sequence engineering efforts to improve aptamer binding properties, and perhaps eventually allow for the direct design of high-quality aptamers. To date, however, there have been very few comprehensive studies exploring the relationship between aptamer binding properties and thermodynamics. Isothermal titration calorimetry (ITC) is a gold-standard method for studying the thermodynamics of ligand-receptor interactions. In this work, we have compiled ITC-derived thermodynamic binding data from 317 small-molecule-binding DNA aptamers, along with specificity profiles for ∼6000 aptamer-ligand pairs, and performed systematic analysis of the resulting datasets. This analysis revealed a variety of interesting patterns and trends. For example, ligand binding for most aptamers is generally driven solely by enthalpy, and aptamers with the highest binding enthalpy and greatest entropic binding penalties consistently have high specificity. We envision that the expansion and further analysis of such datasets will yield a far better understanding of the complex interplay between the various non-covalent interactions underlying aptamer-ligand recognition.

Exogenously and Endogenously Sequential Regulation of DNA Nanodevices Enables Organelle-Specific Signal Amplification in Subcellular ATP Profiling

Adenosine triphosphate (ATP), the primary energy currency in cells, is dynamically regulated across different subcellular compartments. The ATP interplay between mitochondria and endoplasmic reticulum (ER) underscores their coordinated roles in various biochemical processes, highlighting the necessity for precise profiling of subcellular ATP dynamics. Here we present an exogenously and endogenously dual-regulated DNA nanodevice for spatiotemporally selective, subcellular-compartment specific signal amplification in ATP sensing. The system allows for exogenous NIR light-controlled spatiotemporal localization and activation of the aptamer sensor in mitochondria or ER, while a specific endogenous enzyme in the organelles further drives signal amplification via the consumption of molecular beacon fuels, resulting in significantly enhanced sensitivity and spatial precision for the subcellular ATP profiling in the organelle of interest. Furthermore, we demonstrate the application of this system for robust monitoring of ATP fluctuations in mitochondria and ER following drug interventions. This advancement provides a powerful tool for improving our understanding of cellular energetics at the subcellular level and holds potential for the development of targeted therapeutics.

Sequential Activation of DNA Sensor Enables Correlated Imaging of Dual-Enzyme Activities in Living Cells

The DNA repair system relies on the coordinated action of multiple enzymes to maintain genomic stability, with apurinic/apyrimidinic endonuclease 1 (APE1) and flap endonuclease 1 (FEN1) playing pivotal roles in the long-patch base excision repair (LP-BER) pathway. Elevated levels of APE1 and FEN1 have been associated with tumor progression and resistance to therapy, making them key biomarkers for cancer diagnosis and treatment monitoring. Here, we present a sequentially activated AND-logic DNA sensor (D-AF) for the correlated imaging of APE1 and FEN1 in living cells. The sensor operates through a sequential process: APE1 first recognizes and cleaves an apurinic site, initiating structural changes that enable FEN1 to cleave a 5' flap, resulting in restored fluorescence. We demonstrate the use of the D-AF-based nanosensor for in situ imaging of APE1 and FEN1 activities in cancer cells and for monitoring of enzyme dynamics during chemotherapy. This platform offers a valuable tool for investigating DNA repair mechanisms and their roles in cancer diagnosis and treatment.

A High-Affinity and Selective DNA Aptamer for the N-Linked C8-Deoxyguanosine Adduct Produced by the Arylamine Carcinogen 4-Aminobiphenyl

4-Aminobiphenyl (4-ABP) is a known human carcinogen that is implicated in the development of bladder cancers in smokers. The amine substituent undergoes bioactivation to generate nitrenium ions capable of covalently modifying DNA nucleobases. The primary adduct of 4-ABP, N-(deoxyguanosin-8-yl)-4-aminobiphenyl (dG-C8-ABP), is a bulky N-linked C8-dG adduct that serves as a biomarker for assessing the cancer risk associated with aromatic amine exposure. In this study, the capture-SELEX method was utilized to isolate DNA aptamers for dG-C8-ABP with high affinity and specificity. Using thioflavin T fluorescence spectroscopy and isothermal titration calorimetry, the parent aptamer PdG-1 has a Kd value below 100 nM and over 50-fold selectivity for dG-C8-ABP against competing analytes. A turn-on fluorescent sensor for dG-C8-ABP diagnostics, developed using a strand displacement assay, is also presented with a limit of detection of 68 nM. Our work represents the first selection of a DNA aptamer for a bulky DNA adduct produced by a known human carcinogen and sets the stage for the creation of ultrasensitive aptasensor platforms to meet the challenge of dG-C8-ABP detection in clinical settings.

A novel poly(amidoamine)-modified electrolyte-insulator-semiconductor-based biosensor for label-free detection of ATP

Adenosine triphosphate (ATP) is crucial for cellular activity. The need for ATP detection in the field of biomedicine is rapidly increasing. Several biosensor-based approaches have been developed as a result of the growing demand for ATP detection. An electrolyte-insulator-semiconductor (EIS) sensor is a type of field-effect device that has the ability to detect surface-potential changes with a specific level of sensitivity. In this study, a label-free ATP detection biosensor based on poly(amidoamine)-modified EIS sensors was developed, in which an ATP-sensitive aptamer (Apt) was utilized as the sensitive element and the EIS sensor was used as the transducer. It is possible to monitor the binding of charged molecules, such as aptamers using EIS sensors in a label-free manner with a straightforward setup. To improve the coupling efficiency of Apt with the EIS sensor, a positively charged polyelectrolyte, i.e., poly (amidoamine) (PAMAM) dendrimers, was utilized to modify the surface of the EIS sensors to attach the negatively charged Apt through electrostatic attraction. The adsorptive binding of Apt and ATP results in a change in the capacitance of the EIS sensor. During the process of surface modification, the electrochemical measurements of capacitance-voltage (C-V) curves and constant-capacitance (ConCap) characteristics were utilized as indicators for the corresponding processes of EIS sensor surface modification. The measurement results indicated that this biosensor was able to detect ATP with high sensitivity and good specificity. The detection range of ATP was from 0.1 nM to 100 nM and the detection limit was as low as 0.12 nM. This biosensor has the potential to be utilized in the detection of ATP in the surrounding microenvironment of cells and tissues, with promising prospects for application in the field of biomedicine such as energy and metabolism monitoring of cells and tissues.

Glycan-Matchmade Multivalent Decoration of Enzyme Labels for Amplified Electrochemical Detection of Glycoproteins

Glycoproteins are of significant value to liquid biopsy of human diseases. Herein, we present a universal electrochemical platform for the amplified detection of glycoproteins, taking advantage of the glycan-matchmade multivalent decoration of enzyme labels for the enzymatic signal amplification. Briefly, the glycan-matchmade multivalent decoration involves two steps, i.e., the site-directed decoration of the phenylboronic acid-coated gold nanoparticles (PBA-AuNPs) to the cis-diol-containing glycans of glycoproteins and the subsequent decoration of enzyme labels via the affinity cross-linking between the glycan moieties of enzyme labels and the remaining PBA groups on the PBA-AuNP cross-linkers. As the glycan matchmaking-based strategy enables the decoration of each glycoprotein with multiple enzyme labels, this electrochemical platform exhibits a high sensitivity toward glycoprotein detection. Using alkaline phosphatase (ALP) as the proof-of-concept enzyme label in combination with the solid-state voltammetric stripping assay of the enzymatically deposited metallic silver, the detection limits at the pg mL-1 level have been obtained for the electrochemical aptamer-based detection of thrombin and prostate-specific antigen. Overall, this work illustrates an efficient and versatile strategy for the multivalent decoration of enzyme labels for electrochemical detection of glycoproteins at ultralow concentration levels, holding the desirable advantages of simplicity and cost-effectiveness over sandwich enzyme-linked immunosorbent assays.

Synthetic transmembrane DNA receptors enable engineered sensing and actuation

In living organisms, cells synergistically couple cascade reaction pathways to achieve inter- and intracellular signal transduction by transmembrane protein receptors. The construction and assembly of synthetic receptor analogs that can mimic such biological processes is a central goal of synthetic biochemistry and bionanotechnology to endow receptors with user-defined signal transduction effects. However, designing artificial transmembrane receptors with the desired input, output, and performance parameters are challenging. Here we show that the dimerization of synthetic transmembrane DNA receptors executes a systematically engineered sensing and actuation cascade in response to external molecular signals. The synthetic DNA receptors are composed of three parts, including an extracellular signal reception part, a lipophilic transmembrane anchoring part, and an intracellular signal output part. Upon the input of external signals, the DNA receptors can form dimers on the cell surface triggered by configuration changes, leading to a series of downstream cascade events including communication between donor and recipient cells, gene transcription regulation, protein level control, and cell apoptosis. We believe this work establishes a flexible cell surface engineering strategy that is broadly applicable to implement sophisticated biological functions.

Reducing Measurement Deviation by Metastable DNA Probes for Aptamer Thermodynamic Characterization

DNA reaction equilibrium-based calculations have great potential in thermodynamic characterization, but their widespread applications are hindered by significant measurement deviation of equilibrium concentration. Here, we report the advantages of metastable DNA hybridization in reducing quantification deviation of equilibrium concentration and propose a universal and standardized strategy for measuring aptamer binding energy, termed metastable DNA reference calorimetry (MDRC). We built different MDRC-based algorithms tailored to different aptamer binding models, enabling the calculation of thermodynamic parameters for aptamers with one or more binding sites. Our correlative model, considering the cross-effects between different binding sites, showed that for ATP aptamers with two binding sites, binding of the first ATP molecule would decrease its affinity for the second at low temperatures and even completely inhibit this binding at high temperatures. Moreover, the thermodynamic parameters of protein-specific aptamers were calculated to elucidate the universality of the method. The successful analysis of cell-specific aptamers further demonstrated MDRC's applicability in complex biological systems.

Design of Label-Free DNA Light-Up Aptaswitches for Multiplexed Biosensing

We present a straightforward design approach to develop DNA-based light-up aptasensors. We performed the first systematic comparison of DNA fluorescent light-up aptamers (FLAPs), revealing key differences in affinity and specificity for their target dyes. Based on our analysis, two light-up aptamers emerged with remarkable specificity, fluorescence enhancement, and functionality in diverse environments. We then established generalizable design rules to couple the DNA FLAPs to small molecule-binding aptamers, creating 13 novel aptaswitches with reliable turn-on or turn-off aptaswitching in a dose-response manner. We developed new aptaswitches for ochratoxin A and ATP biosensing with up to a seven-fold response and low background. Finally, we demonstrated the orthogonal activity of our aptaswitch platforms. As a result, we introduce fluorescent light-up aptaswitches for one-pot detection of different targets in diverse sample matrices.

Sialic acid aptamer and RNA in situ hybridization-mediated proximity ligation assay for spatial imaging of glycoRNAs in single cells

Glycosylated RNAs (glycoRNAs) have recently emerged as a new class of molecules of substantial interest owing to their potential roles in cellular processes and diseases. However, studying glycoRNAs is challenging owing to the lack of effective research tools including, but not limited to, imaging techniques to study the spatial distribution of glycoRNAs. Recently, we reported the development of a glycoRNA imaging technique, called sialic acid aptamer and RNA in situ hybridization-mediated proximity ligation assay (ARPLA), to visualize sialic acid-containing glycoRNAs with high sensitivity and specificity. Here we describe the experimental design principles and detailed step-by-step procedures for ARPLA-assisted glycoRNA imaging across multiple cell types. The procedure includes details for target selection, oligo design and preparation, optimized steps for RNA in situ hybridization, glycan recognition, proximity ligation, rolling circle amplification and a guideline for image acquisition and analysis. With properly designed probe sets and cells prepared, ARPLA-based glycoRNA imaging can typically be completed within 1 d by users with expertise in biochemistry and fluorescence microscopy. The ARPLA approach enables researchers to explore the spatial distribution, trafficking and functional contributions of glycoRNAs in various cellular processes.

An Ultrahigh Affinity DNA Aptamer for Quinine and Its Intrinsic Fluorescence Based Label-Free Detection

Measuring quinine is critical for the detection of its overdose, understanding its pharmacological and toxicological effects, and monitoring its pollution. While a previously reported aptamer named MN4 can bind quinine, it was not selected for it, leading to compromised binding affinity and specificity. In this work, a new quinine aptamer was isolated using the library immobilization capture-SELEX technique. The Q1 aptamer has a Kd value of 10 nM determined by an isothermal titration calorimetry experiment and 45 nM in a fluorescence binding assay. A 3.5 nM quinine limit of detection was obtained based on the aptamer binding-induced quenching of the intrinsic fluorescence of quinine. A large blue shift in fluorescence was observed for quinine upon binding to Q1, whereas binding to MN4 led to a very small red shift, indicating different ways of quinine binding by these two aptamers. Q1 did not bind cocaine based on NMR spectroscopy and fluorescence assays also indicated excellent selectivity against other tested molecules. This work has supplied a high affinity aptamer for quinine that can be useful for its detection and fundamental aptamer binding studies. It also highlights the advantages of using capture-SELEX to isolate aptamers for small molecules.

Selection of aptamers targeting small molecules by capillary electrophoresis: Advances, challenges, and prospects

Aptamers, as novel recognition molecules, hold immense potential across various domains such as biosensing, nucleic acid drugs, medical diagnostics, as well as environmental and food analysis. The majority of aptamer selection processes targeting small molecules and protein commonly employ magnetic bead-based methodologies, wherein the target is initially immobilized on magnetic beads, followed by magnetic separation. The Evolutionary Systematic Evolution of Ligands by Exponential Enrichment technique based on capillary electrophoresis (CE-SELEX) is acknowledged as one of the most efficient screening methods. Our research group has achieved breakthroughs in employing CE-SELEX for the selection of aptamers targeting small molecules. This paper outlines specific methodologies utilized from 2005 to 2023 for CE-SELEX screening for small-molecule targets. It summarizes the methods for the separation of small molecules and oligonucleotide complexes, as well as the identification of candidate aptamers. Drawing upon our research group's extensive experience in CE-SELEX for selecting aptamers targeting multi-scale targets, we offer strategic guidance specifically tailored to the screening of aptamers for small-molecule targets using CE-SELEX. This includes systematic insights into each technical aspect of the screening process: analysis of the structure of small-molecule targets and characteristics of ssDNA libraries, patterns of CE separation and collection of complexes, screening strategies, and CE-based methods for the affinity and specificity characterization of aptamers. This comprehensive review aims to contribute to the widespread adoption of CE-SELEX technology, enhancing the efficiency and success rate of selecting aptamers for small-molecule targets.

Efficient Electrochemical Coupling of Aptamer to Nanoelectrode for In Situ Detection of ATP in Single Cells

Nanoelectrodes, renowned for their small size, rapid mass transport, fast response, and high spatiotemporal resolution, have been recognized as a powerful tool in biosensing, especially for single-cell analysis. However, the nanoelectrode itself has no selectivity and cannot respond to nonelectroactive substances, limiting its wide application to some extent. Herein, we propose a simple and efficient electrochemical conjugation strategy to develop an electrochemical aptamer-coupled (E-AC) sensor for detecting adenosine triphosphate (ATP) in single living cells. Through simple electrochemical conjugation, ferrocene-labeled aptamers could be stably and efficiently coupled onto the surface of carbon fiber electrodes within 5 min. The small size (ca. 400 nm) and biocompatibility of the functionalized nanoelectrodes enabled the E-AC sensors to noninvasively and continuously monitor ATP content in single HeLa cells over 20 min, as well as the cellular ATP fluctuations under glucose starvation. Furthermore, the E-AC sensors exhibit superior specificity, sensitivity, and universality in the application of analysis of ATP in single living Hela cells and MCF-7 cells. They were also versatile for sensing other nonelectroactive targets through modification of the corresponding electroactive marker-labeled aptamers, showing great potential in cell-related physiological processes and drug screening.

A DNA Aptamer for 2-Aminopurine: Binding-Induced Fluorescence Quenching

2-Aminopurine (2AP) is a fluorescent analog of adenine, and its unique properties make it valuable in various biochemical and biotechnological applications. Its fluorescence property probes local dynamics in DNA and RNA because stacking with the surrounding bases quench its fluorescence. 2AP-labeled DNA or RNA sequences have been used for the detection of genetic mutations, viral RNA, or other nucleic acid-based markers associated with diseases like cancer and infectious diseases. In this study, we isolated aptamers for 2AP using the library immobilization capture-SELEX technique. A dominating aptamer family was isolated after 15 rounds of selection. The Kd values for the most abundant 2AP1 aptamer are 209 nM in a fluorescence assay and 72 nM in an isothermal titration calorimetry test. A 32 nM 2AP limit of detection was tested based on its intrinsic fluorescence change upon aptamer binding. Additionally, we conducted some mutation analysis. Furthermore, we tested the selectivity of this aptamer and discovered that it can bind adenine and adenosine with approximately 100-fold lower affinity than 2AP.

Fluorogenic target competitors for developing label-free and sensitive folding-unswitching aptamer sensors

BACKGROUND

Aptamers have aroused tremendous applications in sensors, drug deliveries, diagnosis, and therapies. In particular, target-induced global structure switching of aptamers has been widely used to develop selective sensors. However, fluorophore and/or quencher modification, sequence elongation, and nano-interface adsorption are required to design such global structure-switching aptamer sensors (SSAS) in order to signal target binding events. Accordingly, these requirements make SSAS at a high cost and expense of sensors' sensitivity. In this aspect, efforts should be made to overcome these drawbacks of SSAS.

RESULTS

Herein, we tried to develop label-free folding-unswitching aptamer sensors (FUAS) by searching fluorogenic target competitors. Using adenine nucleoside/nucleotide as the proof-of-concept model targets, we screened out berberine (BER) from natural isoquinoline alkaloids (having rings comparable to targets) as the best fluorogenic target competitor. Binding of BER at the conserved nucleotides of intact aptamer foldings turned on this fluorogenic target competitor' fluorescence. Targets then competed with this fluorogenic target competitor over the same conserved nucleotides to cause its release in favor of a resultant fluorescence change. We found that the developed FUAS are much more sensitive than the previously reported SSAS. The FUAS were successfully applied to assays of ATP and adenosine deaminase in serums, and to screening of the adenosine deaminase's inhibitor, verifying the reliability and applicability of this FUAS platform in variant fields.

SIGNIFICANCE

We demonstrate that by designing fluorogenic target competitors, FUAS can be alternatively developed in a label-free manner and with a higher sensitivity than the previously developed SSAS. This work opens a new way to develop high-performance aptamer-based sensors. Furthermore, our developed FUAS should inspire more interest for wide applications incluidng target-triggered drug deliveries when therapeutic fluorogenic target competitors are used.

DNA Nanotechnology for Application in Targeted Protein Degradation

DNA is a kind of flexible and versatile biomaterial for constructing nanostructures and nanodevices. Due to high biocompatibility and programmability and easy modification and fabrication, DNA nanotechnology has emerged as a powerful tool for application in intracellular targeted protein degradation. In this review, we summarize the recent advances in the design and mechanism of targeted protein degradation technologies such as protein hydrolysis targeted chimeras, lysosomal targeted chimeras, and autophagy based protein degradation. Subsequently, we introduce the DNA nanotechnologies of DNA cascade circuits, DNA nanostructures, and dynamic machines. Moreover, we present the latest developments in DNA nanotechnologies in targeted protein degradation. Finally, the vision and challenges are discussed.

Dissociation Constant (Kd) Measurement for Small-Molecule Binding Aptamers: Homogeneous Assay Methods and Critical Evaluations

Since 1990, numerous aptamers have been isolated and discovered for use in various analytical, biomedical, and environmental applications. This trend continues to date. A critical step in the characterization of aptamer binding is to measure its binding affinity toward both target and non-target molecules. Dissociation constant (Kd) is the most commonly used value in characterizing aptamer binding. In this article, homogenous assays are reviewed for aptamers that can bind small-molecule targets. The reviewed methods include label-free methods, such as isothermal titration calorimetry, intrinsic fluorescence of target molecules, DNA staining dyes, and nuclease digestion assays, and labeled methods, such as the strand displacement reaction. Some methods are not recommended, such as those based on the aggregation of gold nanoparticles and the desorption of fluorophore-labeled DNA from nanomaterials. The difference between the measured apparent Kd and the true Kd of aptamer binding is stressed. In addition, avoiding the titration regime and paying attention to the time required to reach equilibrium are discussed. Finally, it is important to include mutated non-binding sequences as controls.

Selection of DNA aptamers for detecting metronidazole and ibuprofen: two common additives in soft drinks

To enhance the effects of some functional soft drinks, drugs, especially metronidazole (MNZ) and ibuprofen (IBF), are often illegally added. This poses a serious threat to the health of consumers. Therefore, developing simple and rapid detection methods for these additives is crucial. In this study, DNA aptamers of metronidazole and ibuprofen were selected using the library-immobilized method. The best aptamer for metronidazole, named MNZ-1, has a dissociation constant (Kd) value of 4.9 μM and the aptamer for ibuprofen, named IBF-1, shows a Kd of 9.3 μM, as determined by the thioflavin T (ThT) fluorescence assay. The Kd values measured using isothermal titration calorimetry (ITC) were 17.0 μM and 66.7 μM for these two aptamers, respectively. Selectivity experiments indicate that MNZ-1 demonstrates very weak binding to structurally similar drugs, whereas IBF-1 exhibits binding capability to some structurally similar compounds comparable to ibuprofen, enabling the simultaneous detection of these types of drugs. Neither MNZ-1 nor IBF-1 binds to other common drugs. Using ThT, a label-free fluorescent detection method was developed for metronidazole and ibuprofen in soft drinks, showing limits of detection (LODs) of 0.6 μM and 4.7 μM, respectively. Owing to their small size and well-defined secondary structures, these aptamers are expected to be utilized in analytical applications for food and environmental monitoring.

Light-activated oxidative capacity of isoquinoline alkaloids for universal, homogeneous, reliable, colorimetric assays with DNA aptamers

Aptamers are good affinity receptors for bio-assays, while colorimetric method is suitable for point-of-care sensing via direct visualization. But previously aptamers often need complex re-engineering for colorimetric measurement at the cost of affinity and performance. Here isoquinoline alkaloids are found to own unique light-activated oxidative capacity, which can be specifically triggered by unmodified aptamers. This feature is universal for two alkaloids to efficiently oxidize four chromogenic substrates with obvious color changes. Based on a dye-displacement process, we have developed a novel light-activated aptamer system for the colorimetric assay of estradiol. It shows a good sensitivity with a detection limit of 326 nM, and this homogeneous assay is reliable to avoid artifacts in previous heterogeneous scheme. Besides, it is proven to be a universal design to assay other two targets. Significantly, they do not employ any aptamers re-engineering but only simply use their parental aptamers. Therefore, this light-activated oxidative capacity of isoquinoline alkaloid can serve as an ideal tool for colorimetric assay of various targets based on aptamer's specific recognition.

DNA aptamers for common buffer molecules: possibility of buffer interference in SELEX

During a typical aptamer selection experiment, buffer molecules are used at the 10 to 50 mM range, whereas target molecules could be used at much lower concentrations even in low μM levels. Therefore, doubts existed regarding the potential enrichment of buffer binding aptamers, particularly for failed selections that cannot validate binding of enriched sequences. In this study, we used two common buffer molecules, Tris and HEPES, as target molecules. While we successfully isolated aptamers for Tris buffer, our attempts to generate aptamers for HEPES buffer failed. Thioflavin T (ThT) fluorescence spectroscopy showed the dissociation constant (Kd) of the Tris buffer aptamer to be 2.9 mM, while isothermal titration calorimetry showed a Kd of 43 μM. NMR spectroscopy also confirmed aptamer binding. Finally, we discussed the implications of this buffer selection work and recommended the use of certain buffers.

Dynamic Chemistry of DNA-Based Nanoassemblies in Living Cells

In recent years, the controlled assembly/disassembly of exogenous chemical components inside cells has become an emerging approach to regulating cell functions. However, the construction of dynamic material chemistry systems in living cells always remains highly challenging due to the complicated intracellular microenvironment. Nucleic acid is a category of biological components that can achieve efficient molecular assembly via specific base-pairing and perform biological functions in the intracellular microenvironment. Deoxyribonucleic acid (DNA) molecules exhibit the superior performance of intracellular assembly, including sequence programmability, molecule recognition ability, and nanostructure predictability, as well as the unique biological functions that traditional synthetic polymers do not carry, showing great superiority in the construction of dynamic material chemistry systems. Moreover, the technologies of DNA synthesis are relatively mature, and the conjugation of DNA with functional small molecules can be achieved through established chemical synthesis methods, facilitating the construction of DNA-based dynamic materials with more functions. In addition, a few specific DNA molecules have been proven to show responsiveness toward different stimuli, functioning as dynamic modules.In this Account, we summarize our recent work in dynamic chemistry of DNA-based nanoassemblies in living cells from the perspective of stimulus types including enzyme, H+, glutathione (GSH), adenosine triphosphate (ATP), and light. Upon the specific stimuli, DNA-based nanoassemblies undergo precise assembly in living cells, executing disassembly or aggregation, which consequently affects the functions and behaviors of living cells. In the first part, we describe the interactions between DNA-based nanoassemblies and intracellular enzymes, namely the enzymatic cleavage of intracellular enzymes on the DNA or RNA sequences. In the second part, we summarize the effects of H+ in lysosomes on DNA-based nanoassemblies, including the formation of a tetraplex i-motif structure and the decomposition of acid-degradable polymeric coating. In the third part, we discuss the mechanism of GSH responsiveness of DNA-based nanoassemblies, including the breaking of disulfide bonds and reduction-responsive nanoparticles. In the fourth part, we describe the ATP-mediated conformational transition for the specific release of functional RNA sequences. In the fifth part, we demonstrate the light-mediated spatiotemporally dynamic chemistry of DNA-based nanoassemblies. In summary, based on the achievements of our group in the study of dynamic chemistry of DNA-based nanoassemblies, the assembly, disassembly, and reassembly in living cells are well-controlled, the regulation of cellular functions are explored, and the new strategies for cancer therapeutics are demonstrated. We envision that our work on the dynamic chemistry of DNA-based nanoassembly is a new paradigm for constructing dynamic material chemistry systems inside living cells, and will facilitate the development of precision medicine.

Delivering DNA Aptamers Across the Blood-Brain Barrier Reveals Heterogeneous Decreased ATP in Different Brain Regions of Alzheimer's Disease Mouse Models

DNA aptamers have been developed as sensors to detect metabolites with high sensitivity, selectivity, and biocompatibility. While they are effective in sensing important targets in the brain, the lack of methods for their efficient delivery across the blood-brain barrier (BBB) has significantly hindered their applications in brain research. To address this issue, we herein report the development of brain cell-derived exosomes as endogenous BBB delivery vehicles to deliver an ATP-responsive aptamer across the BBB of live mice for noninvasive live brain imaging. We found that the system uses endosome recycling to transfer the sensors between the delivered exosomes and native recycling endosomes, resulting in high delivery efficiencies. Using this system, we observed unique signal distributions for ATP across different brain regions, with significant accumulation in the subiculum and cortex in healthy mice. In an Alzheimer's disease transgenic mouse model, ATP levels decreased in the subiculum and cortex, demonstrating this method's capability to determine metabolite location and relative abundance with high spatial resolution in vivo. Since DNA aptamers have been obtained for many other targets, the method developed in this work can be applied to deliver sensors across the BBB to image a wide range of other brain-related metabolites.

Exonuclease III/Cas12a Cascade Amplification Strategy and Smartphone-Based Portable Fluorescence Detector to Repurpose the Commercial AFP Strip for the POCT of Multiple RNAs

Point of care testing (POCT) of nucleic acid (NA) contributes to the timely disease diagnosis, like bacteria and virus screening in households or resource-constrained areas, but its development has always been stagnant. Herein, we proposed an exonuclease III cascaded with CRISPR/Cas12a (Exo-III/Cas12a) amplification strategy and constructed a smartphone-based portable fluorescence detector (SPFD) to repurpose the commercial alpha-fetoprotein (AFP) strip for the ultrasensitive and hand-held detection of NA samples. In detail, the target-initiated-Exo-III/Cas12a strategy realizes the signal amplification and liberates AFP from magnetic beads through the trans-cleavages of activated Cas12a toward the AFP aptamer. After magnetic separation and migration, the fluorescence signals of the test (FT) and control (FC) lines on the AFP strip were digitally output by the SPFD, and the FT/FC was employed for the quantitative analysis to minimize external disturbances and improve accuracy. We experimentally assessed the universe applicability of the proposed NA-POCT platform toward miRNA-155, 16S rRNA of Staphylococcus aureus, and ORF1a/b RNA of Covid-19 pseudovirus, achieving favorable detection limits of 42 aM, 18 CFU/mL, and 87 copies/μL, respectively. Moreover, its simplicity, universality, and admirable detection performance demonstrate a great potential in the aspect of rapidly transforming the existing POCT devices for multiple new applications at the time of need.

Rapid Nuclease-Assisted Selection of High-Affinity Small-Molecule Aptamers

Aptamers are nucleic acid bioreceptors that have been widely utilized for a variety of biosensing applications, including in vivo detection methods that would not be possible with antibody-based systems. However, it remains challenging to generate high-quality aptamers for small molecule targets, particularly for use under physiological conditions. We present a highly effective aptamer selection technology for small-molecule targets that utilizes the nuclease EcoRI to remove nonspecific or weakly binding sequences in solution phase, rapidly enriching high-affinity target binders within just a few rounds of selection. As proof-of-concept, we used our nuclease-assisted SELEX (NA-SELEX) method to isolate aptamers for a synthetic cannabinoid, AB-FUBINACA. Within five rounds, we identified two highly specific aptamers that exhibit nanomolar affinity at physiological temperature. We also demonstrate the robustness and reproducibility of NA-SELEX by performing the same selection experiment with fresh reagents and libraries, obtaining the same two aptamers as well as two other high-quality aptamer candidates. Finally, we compare NA-SELEX against a conventional library-immobilized SELEX screen for AB-FUBINACA using the same screening conditions, identifying aptamers with 25-100-fold weaker affinity after 11 rounds of selection. NA-SELEX therefore could be an effective selection method for the isolation of high-quality aptamers for small-molecule targets.

Kinetic ITC of DNA Aptamers Binding for Small Molecules and Implications for Binding Assays and Biosensors

The determination of kon and koff values through kinetic analysis is crucial for understanding the intricacies of aptamer-target binding interactions. By employing kinetic ITC, we systematically analyzed a range of ITC data of various aptamers. Upon plotting their kon and koff values as a function of their Kd values, a notable trend emerged. Across a range of Kd values spanning from 28 nM to 864 μM, the kon value decreased from 2×105 M-1 s-1 to 96 M-1 s-1, whereas the koff value increased from 1.03×10-3 s-1 to 0.012 s-1. Thus, both kon and koff contributed to the change of Kd in the same direction, although the range of kon change was larger. Since experiments are often run at close to the Kd value, this concentration effect also played an important role in the observed binding kinetics. The effect of these kinetic parameters on two common sensing mechanisms, including aptamer beacons and strand-displacement assays, are discussed. This work has provided the kinetic values of small molecule binding aptamers and offered insights into aptamer-based biosensors.

Integrating microneedles and sensing strategies for diagnostic and monitoring applications: The state of the art

Microneedles (MNs) offer minimally-invasive access to interstitial fluid (ISF) - a potent alternative to blood in terms of monitoring physiological analytes. This property is particularly advantageous for the painless detection and monitoring of drugs and biomolecules. However, the complexity of the skin environment, coupled with the inherent nature of the analytes being detected and the inherent physical properties of MNs, pose challenges when conducting physiological monitoring using this fluid. In this review, we discuss different sensing mechanisms and highlight advancements in monitoring different targets, with a particular focus on drug monitoring. We further list the current challenges facing the field and conclude by discussing aspects of MN design which serve to enhance their performance when monitoring different classes of analytes.

Endogenous Enzyme-Driven Amplified DNA Nanocage Probe for Selective and Sensitive Imaging of Mature MicroRNAs in Living Cancer Cells

Selective and sensitive imaging of intracellular mature microRNAs (miRNAs) is of great importance for biological process study and medical diagnostics. However, this goal remains challenging because of the interference of precursor miRNAs (pre-miRNAs) and the low abundance of mature miRNAs. Herein, we develop an endogenous enzyme-driven amplified DNA nanocage probe (Acage) for the selective and sensitive imaging of mature miRNAs in living cells. The Acage consists of a microRNA-responsive probe, an endogenous enzyme-driven fuel strand, and a DNA nanocage framework with an inner cavity. Benefiting from the size selectivity of DNA nanocage, smaller mature miRNAs rather than larger pre-miRNAs are allowed to enter the cavity of DNA nanocage for molecular recognition; thus, Acage can significantly reduce the signal interference of pre-miRNAs. Moreover, with the driving force of an endogenous enzyme apurinic/apyrimidinic endonuclease 1 (APE1) for efficient signal amplification, Acage enables sensitive intracellular miRNA imaging without an additional external intervention. With these features, Acage was successfully applied for intracellular imaging of mature miRNAs during drug treatment. We believe that this strategy provides a promising pathway for better understanding the functions of mature microRNAs in biological processes and medical diagnostics.

Label-free colorimetric detection platform based on catalytic hairpin self-assembly and G-quadruplex/hemin DNAzyme for comprehensive biomarker profiling

The expression level of human apurinic/apyrimidinic endonuclease 1 (APE1) is closely associated with the onset of various diseases, establishing it as a crucial clinical biomarker and a target in anti-cancer efforts. This study accomplished colorimetric and visual detection of APE1 by harnessing its endonuclease activity through catalytic hairpin self-assembly (CHA) and G-quadruplex/hemin DNAzyme. Optimization of the freedom degrees of the G-rich sequence significantly improved the detection performance of the strategy by influencing DNAzyme formation. Additionally, we replaced the signal reporting system with a molecular beacon to develop a fluorescence detection strategy, which served as an extension of the signal amplification system for validation and signal readout. The fluorescent probe method achieved a detection limit of 3.37 × 10-4 U/mL, while the colorimetric method yielded a detection limit of 6.5 × 10-3 U/mL, with a linear range spanning from 0.01 to 0.25 U/mL. Subsequently, the colorimetric approach effectively assessed APE1 activity in biological samples and facilitated the screening of APE1 activity inhibitors. Furthermore, this CHA/G-quadruplex/hemin DNAzyme strategy was adapted for the colorimetric detection of adenosine, showcasing its broad applicability across various biomarkers. The developed colorimetric analytical strategy represents a pivotal biosensing platform for diagnosing and treating diseases.

Modular Engineering of Aptamer-Based Nanobiotechnology for Conditional Control of ATP Sensing

Dynamic changes of intracellular, extracellular, and subcellular adenosine triphosphates (ATPs) have fundamental interdependence with the physio-pathological states of cells. Spatially selective in situ imaging of such ATP dynamics offers valuable mechanistic insights into the related biological activities. Despite significant advances in the design of aptamer sensors for ATP detection, the dearth of methods that enable precise ATP imaging in specific cellular locations remains a challenge in this field. This review focuses on the modular engineering of regulatable sensing technology via the integration of aptamer probe designs with advanced functional nanomaterials, allowing conditional control of ATP sensing and imaging with high spatial precision from subcellular organelles to living animals. Highlighting the recent advances in the design of photo-triggered nanosensors for spatiotemporally controlled ATP imaging, endogenously-triggered ATP sensing in a cell-selective manner, and spatially-controlled nanodevices for ATP imaging in specific organelles and extracellular microenvironments. Emphasis will be put on elucidating the principles of how nanotechnology can be applied to regulate the spatial precision of aptamer-based ATP sensing activities. The authors envision that this perspective provides insights into the engineering of aptamer-based nanobiotechnology for opening new frontiers in precise molecular sensing and other bio-applications.

Development of Better Aptamers: Structured Library Approaches, Selection Methods, and Chemical Modifications

Systematic evolution of ligands by exponential enrichment (SELEX) has been used to discover thousands of aptamers since its development in 1990. Aptamers are short single-stranded oligonucleotides capable of binding to targets with high specificity and selectivity through structural recognition. While aptamers offer advantages over other molecular recognition elements such as their ease of production, smaller size, extended shelf-life, and lower immunogenicity, they have yet to show significant success in real-world applications. By analyzing the importance of structured library designs, reviewing different SELEX methodologies, and the effects of chemical modifications, we provide a comprehensive overview on the production of aptamers for applications in drug delivery systems, therapeutics, diagnostics, and molecular imaging.

Non-invasive single cell aptasensing in live cells and animals

We report a genetically encoded aptamer biosensor platform for non-invasive measurement of drug distribution in cells and animals. We combined the high specificity of aptamer molecular recognition with the easy-to-detect properties of fluorescent proteins. We generated six encoded aptasensors, showcasing the platform versatility. The biosensors display high sensitivity and specificity for detecting their specific drug target over related analogs. We show dose dependent response of biosensor performance reaching saturating drug uptake levels in individual live cells. We designed our platform for integration into animal genomes; thus, we incorporated aptamer biosensors into zebrafish, an important model vertebrate. The biosensors enabled non-invasive drug biodistribution imaging in whole animals across different timepoints. To our knowledge, this is the first example of an aptamer biosensor-expressing transgenic vertebrate that is carried through generations. As such, our encoded platform addresses the need for non-invasive whole animal biosensing ideal for pharmacokinetic-pharmacodynamic analyses that can be expanded to other organisms and to detect diverse molecules of interest.

Dynamic selection of high-affinity aptamers using a magnetically activated continuous deflection microfluidic chip

To accelerate the discovery of high-affinity aptamers, a magnetically activated continuous deflection (MACD) chip was designed. The MACD chip could achieve dynamic selection in a continuous flow, which meant that the binding and separation were carried out consecutively. Dynamic selection could make selection efficient. Low-affinity sequences could be eluted in time and high-affinity sequences could be enriched via dynamic selection. The stringency of the conditions could be further increased by lowering the target concentration in the dynamic selection. Finally, a C.al3 aptamer with high-affinity and high-specificity for Candida albicans (C. albicans) was obtained through six rounds of selection. Its dissociation constant (Kd) was 7.9 nM. This demonstrated that dynamic selection using a MACD chip was an effective method for high-affinity aptamer selection.

Photocatalytic Aptamer Chemiluminescent System for a Homogeneous, Reliable, Label-Free, Generic Assay of Small Molecules

Chemiluminescence is a powerful analytical technique with many advantages, while aptamers are well-known as good molecular recognition units. However, many aptamer-based chemiluminescence assays employed interface sensing, which often needed several immobilization, separation, and washing steps. To minimize the risks of contamination and false-positive, we for the first time proposed a photocatalytic aptamer chemiluminescent system for a homogeneous, label-free, generic assay of small molecules. After binding to a DNA aptamer, thioflavin T has a unique photocatalytic oxidase activity to activate the system's luminol chemiluminescence. Then, the specific binding between the aptamer and target molecules will compete with the above process. Therefore, we can realize the efficient assay of different analytes including estradiol and adenosine. Such a homogeneous chemiluminescent system allowed a direct assay of small molecules with limits of detection in a nM level. Several control tests were carried out to avoid possible false-positive results, which were originated from the interactions between analytes and sensing interfaces previously. This homogeneous chemiluminescent system provides a useful strategy to reliably assay various analytes in the pharmacy or biology field.

Exploring the Landscape of Aptamers: From Cross-Reactive to Selective to Specific, High-Affinity Receptors for Cocaine

We reported over 20 years ago MNS-4.1, the first DNA aptamer with a micromolar affinity for cocaine. MNS-4.1 is based on a structural motif that is very common in any random pool of oligonucleotides, and it is actually a nonspecific hydrophobic receptor with wide cross-reactivity with alkaloids and steroids. Despite such weaknesses preventing broad applications, this aptamer became widely used in proof-of-concept demonstrations of new formats of biosensors. We now report a series of progressively improved DNA aptamers recognizing cocaine, with the final optimized receptors having low nanomolar affinity and over a thousand-fold selectivity over the initial cross-reactants. In the process of optimization, we tested different methods to eliminate cross-reactivities and improve affinity, eventually achieving properties that are comparable to those of the reported monoclonal antibody candidates for the therapy of overdose. Multiple aptamers that we now report share structural motifs with the previously reported receptor for serotonin. Further mutagenesis studies revealed a palindromic, highly adaptable, broadly cross-reactive hydrophobic motif that could be rebuilt through mutagenesis, expansion of linker regions, and selections into receptors with exceptional affinities and varying specificities.

Biosensor for ATP detection via aptamer-modified PDA@POSS nanoparticles synthesized in a microfluidic reactor

This study introduces aptamer-functionalized polyhedral oligomeric silsesquioxane (POSS) nanoparticles for adenosine triphosphate (ATP) detection where the POSS nanoparticles were synthesized in a one-step, continuous flow microfluidic reactor utilizing thermal polymerization. A microemulsion containing POSS monomers was generated in the microfluidic reactor which was designed to prevent clogging by using a continuous oil flow around the emulsion during thermal polymerization. Surfaces of POSS nanoparticles were biomimetically modified by polydopamine. The aptamer sequence for ATP was successfully attached to POSS nanoparticles. The aptamer-modified POSS nanoparticles were tested for affinity-based biosensor applications using ATP as a model molecule. The nanoparticles were able to capture ATP molecules successfully with an affinity constant of 46.5 [Formula: see text]M. Based on this result, it was shown, for the first time, that microfluidic synthesis of POSS nanoparticles can be utilized in designing aptamer-functionalized nanosystems for biosensor applications. The integration of POSS in biosensing technologies not only exemplifies the versatility and efficacy of these nanoparticles but also marks a significant contribution to the field of biorecognition and sample preparation.

Selection and Characterization of DNA Aptamers for Cytidine and Uridine

Cytidine and uridine are two essential pyrimidine ribonucleotides, and accurate detection of these nucleosides holds significant biological importance. While many aptamers were reported to bind purines, little success was achieved for pyrimidine binding. This study employs the library-immobilization capture-SELEX technique to isolate aptamers capable of selectively binding to cytidine and uridine. First, a selection was performed using a mixture of cytidine and uridine as the target. This selection led to the isolation of a highly selective aptamer for cytidine with a dissociation constant (Kd ) of 0.9 μM as determined by isothermal titration calorimetry (ITC). In addition, a dual-recognition aptamer was also discovered, which exhibited selective binding to both cytidine and uridine. Subsequently, a separate selection was carried out using uridine as the sole target, and the resulting uridine aptamer displayed a Kd of 4 μM based on a thioflavin T fluorescence assay and a Kd of 102 μM based on ITC. These aptamers do not have a strict requirement of metal ions for binding, and they showed excellent selectivity since no binding was observed with their nucleobases or nucleotides. This study has resulted three aptamers for pyrimidines, which can be employed in biosensors and DNA switches.

Selective Hemin Binding by a Non-G-quadruplex Aptamer with Higher Affinity and Better Peroxidase-like Activity

Previous aptamers for porphyrins and metalloporphyrins were all guanine-rich sequences that can fold in G-quadruplex structures. Due to stacking-based binding, these aptamers can hardly tell different porphyrins apart, and they can also bind other planar molecules, hindering their practical applications. In this work, we used the capture selection method to obtain aptamers for hemin and protoporphyrin IX (PPIX). The hemin aptamer (Hem1) features two highly conserved repeating binding loops, and it cannot form a G-quadruplex, which was supported by its Mg2+ -dependent but K+ -independent hemin binding and CD spectroscopy. Isothermal titration calorimetry revealed much higher enthalpy change for the new aptamer, and the best aptamer showed a Kd of 43 nM hemin. Hem1 can also enhance the peroxidase-like activity of hemin. This work demonstrates that aptamers have alternative ways to bind porphyrins allowing selective recognition of different porphyrins.

Intramolecular aptamer switches

Aptamer switches as effective biosensing tools have become a focal point of research in engineered aptasensors. Intramolecular aptamer switches are more versatile, affordable, and simpler than classical "open-close" and strand displacement-based aptamer switches. Recently, many new aptamers with an overall hairpin structure have been reported. In this study, intramolecular aptamer switches were developed by adding new base pairs to the end of aptamers. The additional nucleotides can pair with the internal domains of the aptamer, causing a change in its conformation from the original secondary structure without a target. When a target binds to an aptamer, a marked change in the structure of the aptamer is expected. As models for testing this intramolecular aptamer switch idea, aptamers of oxytetracycline (OTC), 17β-estradiol (E2), and adenosine were employed. When the additional base pairs are too long, binding the target to the aptamer becomes more challenging. This research offers valuable insights into the development of intramolecular aptamer switches and their potential applications in biosensor design.

Affinity-Guided Coevolution of Aptamers for Guanine, Xanthine, Hypoxanthine, and Adenine

The simultaneous evolution of multiple aptamers can drastically increase the speed of aptamer discovery. Most previous studies used the same concentration for different targets, leading to the dominance of the libraries by one or a few aptamers and a low success rate. To foster the best aptamers to grow independently in the sequence space, it is important to (1) use low target concentrations close to their dissociation constants and (2) stop at an early round before any sequence starts to dominate. In this study, we demonstrate this affinity-guided selection concept using the capture-SELEX method to isolate aptamers for four important purines: guanine (5 μM), xanthine (50 μM), hypoxanthine (10 μM), and adenine (10 μM). The round 9 library was split, and in round 10, the four targets were individually used to elute the binding sequences. Using thioflavin T fluorescence spectroscopy and isothermal titration calorimetry, we confirmed highly selective aptamers for xanthine, guanine, and adenine. These aptamers have Kd values below 1 μM and around 100-fold selectivity against most competing analytes, and they compare favorably with existing RNA aptamers and riboswitches. A separate selection was performed using hypoxanthine alone, and no selective aptamer was achieved, even with negative selection, explaining the lack of its aptamer in our mixed selection. This affinity-guided multiplex SELEX study offers fundamental insights into aptamer selection and provides high-quality aptamers for three important purines.

Improvement of the sensitivity of lateral flow systems for detecting mycotoxins: Up-to-date strategies and future perspectives

Mycotoxins are dangerous human and animal health-threatening secondary fungal metabolites that can be found in various food and agricultural products. Several countries have established regulations to restrict their presence in food and agricultural products destined for human and animal consumption. Consequently, the need to develop highly sensitive and smart detection systems was recognized worldwide. Lateral flow assay possesses the advantages of easy operation, rapidity, stability, accuracy, and specificity, and it plays an important role in the detection of mycotoxins. Nevertheless, strategies to comprehensively improve the sensitivity of lateral flow assay to mycotoxins in food have rarely been highlighted and discussed. In this article, a comprehensive overview was presented on the application of lateral flow assay in mycotoxin detection in food samples by highlighting the principle of lateral flow assay, presenting a detailed discussion on various analytical performance-improvement strategies, such as the development of high-affinity recognition reagents, immunogen immobilization methods, and signal amplification. Additionally, a detailed discussion on the various signal analyzers and interpretation approaches was provided. Finally, current hurdles and future perspectives on the application of lateral flow assay in the detection of mycotoxins were discussed.

Capture-SELEX of DNA Aptamers for Sulforhodamine B and Fluorescein

While many dye binding aptamers have been reported, most of them were for light-up aptamers that can significantly enhance the quantum yield of fluorophores. Sulforhodamine B (SRhB) was used as a target previously to select both DNA and RNA aptamers, and the DNA aptamer was a G-quadruplex that can bind to a number of rhodamine analogs. In addition, the previous selections were performed by immobilizing the target molecules. In this work, the library immobilization method was used to respectively select aptamers for SRhB and fluorescein. The SRhB aptamer has a non-G-quadruplex structure with a Kd of 1.0 μM measured from isothermal titration calorimetry. Upon titration of the aptamer, the fluorescence of SRhB increased 2.5-fold, and this aptamer does not require Mg2+ for binding. Rhodamine B has even tighter binding suggesting binding through the xanthene moiety of the dyes. No binding was detected for fluorescein. For the fluorescein selection, a dominant aptamer sequence with a Kd of 147 μM was obtained. This study provides two new aptamers for two important fluorophores that can be used to study aptamer-based separation, dye detection and catalysis. Comparison of these aptamers also provides insights into the effect of functional groups on aptamer binding.

Multiplexed SELEX for Sulfonamide Antibiotics Yielding a Group-Specific DNA Aptamer for Biosensors

The widespread use of sulfonamide (SA) antibiotics in animal husbandry has led to residues of SAs in the environment, causing adverse effects to the ecosystem and a risk of bacterial resistance, which is a potential threat to public health. Therefore, it is highly desirable to develop simple, high-throughput methods that can detect multiple SAs simultaneously. In this study, we isolated aptamers with different specificities based on a multi-SA systematic evolution of ligands by the exponential enrichment (SELEX) strategy using a mixture of sulfadimethoxine (SDM), sulfaquinoxaline (SQX), and sulfamethoxazole (SMZ). Three aptamers were obtained, and one of them showed a similar binding to all tested SAs, with dissociation constant (Kd) ranging from 0.22 to 0.63 μM. For the other two aptamers, one is specific for SQX, and the other is specific for SDM and sulfaclozine. A label-free detection method based on the broad-specificity aptamer was developed for the simultaneous detection of six SAs, with detection of limits ranging from 0.14 to 0.71 μM in a lake water sample. The aptasensor has no binding for other broad-spectrum antibiotics such as β-lactam antibiotics, quinolones, tetracyclines, and chloramphenicol. This work provides a promising biosensor for rapid, multiresidue, and high-throughput detection of SAs, as well as a shortcut for the preparation of different specific recognition elements required for the detection of broad-spectrum antibiotics.

Electrostatic-Mediated Binding of DNA to Lysozymes: Evaluation of Aptamer-Based Assays for Highly Positively Charged Targets

Lysozymes are a highly popular protein target for the development of aptamer-based biosensors. Because a lysozyme is a polycation and DNA is a polyanion, it is essential to separate the contribution of nonspecific electrostatic interactions from specific aptamer binding. In this study, various factors affecting the binding of DNA and lysozymes, including the DNA sequence, DNA length, pH, and salt concentration, were explored using fluorescence polarization. We concluded that direct fluorescence polarization and fluorescence intensity changes are unlikely to be directly applicable for aptamer-based biosensors to detect lysozymes because all of the tested DNA sequences showed binding. These fundamental studies confirm the dominant role of electrostatic binding. We further evaluated three other methods, including label-free fluorescent detection using a DNA staining dye, label-free colorimetric detection using gold nanoparticles, and a fluorescent sensor based on the strand displacement reaction. In each case, we focused on a random DNA sequence that is not expected to bind to the lysozyme as an aptamer. Of all the methods, only the strand displacement strategy can be potentially used to evaluate aptamer binding, as the other methods all responded to nonaptamer sequences. This study provides valuable insights for assaying aptamer binding to cationic proteins that can exhibit a nonspecific attraction to DNA.