Enforcing Extended Porphyrin J-Aggregate Stacking in Covalent Organic Frameworks

A novel framework-targeted affinity-based sandwich photoelectrochemical sensor for trace acrylamide determination

Acrylamide (AAm), a carcinogenic by-product formed during food processing, presents significant health concerns. Here, we developed an innovative photoelectrochemical (PEC) sensor for ultra-sensitive AAm detection, based on a framework-targeted affinity strategy. Utilizing a metal-coordinated porphyrin-based covalent organic framework (TT-Por(Co)-COF) as the capture layer, the sensor leverages thiophene units to enhance charge transport and selectively adsorb AAm. Independent Gradient Model (IGMH) analysis confirmed two weak interaction regions, predominantly hydrogen bonding and van der Waals forces, between AAm and the TT units. Signal amplification is achieved using CdTe quantum dots functionalized with an AAm-specific aptamer. Upon AAm binding, the aptamer facilitates QD accumulation, significantly enhancing photocurrent for precise quantification. Under optimized conditions, the sensor exhibited excellent analytical performance with a linear range from 1 pM to 1000 nM and a detection limit of 0.19 pM (3σ/S, n = 11). offering a promising solution for real-time food safety monitoring.

Chiral Cross-Linked Covalent Organic Framework Films for Highly Sensitive Circularly Polarized Luminescence Probing

The development of covalent organic framework (COF) films featuring circular polarization luminescence (CPL) probing remains a formidable challenge. Herein, we developed a chiral cross-linked COF film to obtain uniform and dense chiral COF films (chirCOFilm) possessing highly sensitive CPL probing for enantiomers. The axial chiral cross-linkers (R-/S-BBNA) are initially introduced into the channels of a COF film (COFilm/R-BBNA or COFilm/S-BBNA) by the vapor-assisted epitaxial method. Then, olefin groups in R-/S-BBNA and COF layers undergo a chiral cross-linking reaction under UV irradiation, forming a chirCOFilm. The obtained chirCOFilms have strong chirality with mirror images, fluorescence discoloration, and intense CPL properties. A multitude of rich chiral photopatterns and chirCOFilm/PDMS flexible films are prepared taking advantage of the photochromic properties of the chirCOFilms during UV illumination, showing the potential application of advanced anticounterfeiting. More importantly, the chirCOFilms realize highly sensitive CPL probing of phenethylamine enantiomers at 5% concentration, which can hardly be achieved from their corresponding fluorescence probing. This study not only provides a new strategy for preparing chiral COF films using chiral cross-linking reaction but also opens a new avenue for achieving highly sensitive probing of enantiomers though CPL.

A vinylene-linked diketopyrrolopyrrole-based covalent organic framework for photocatalytic oxidation reactions

A vinylene-linked DPP-COF with an ultra-narrow bandgap of 1.06 eV was reported. This COF demonstrates high chemical stability and significant charge transfer properties, and was applied to the photooxidation of sulfides and tetrahydroisoquinolines, exhibiting exceptional photoactivities.

The Devil Is in the Details: Pitfalls and Ambiguities in the Analysis of X-ray Powder Diffraction Data of 2D Covalent Organic Frameworks

X-ray powder diffraction (XRPD) data of covalent organic frameworks (COFs) seem to be simple and apparently do not contain a lot of structural information, as these patterns usually do not show more than 3-5 distinguishable Bragg peaks. As COFs are inherently complex materials exhibiting a variety of disorder phenomena like stacking faults, layer curving, or disordered solvent molecules populating the pores, the interpretation of XRPD patterns is far from being trivial. Here we emphasize the critical need for precision and caution in XRPD data acquisition, refinement, and interpretation to avoid common pitfalls and overinterpretations in data analysis. This perspective serves as a comprehensive guide, educating the community on the nuances of refinement processes necessary for advancing COF research with clarity and accuracy.

Porphyrin J-aggregates as a probe for chiral impurities as demonstrated by their symmetry breaking by confinement in montmorillonite clay

In this paper, we demonstrate that chiral J-aggregates of porphyrins are able to detect minute chiral impurities, in this case, the presence of right-handed quartz in acid-activated K10 montmorillonite clay. Aggregation and symmetry breaking of 5,10,15,20-(tetra-4-carboxyphenyl) porphyrin (TCPP) and 5,10,15,20-(tetra-4-sulfonatophenyl) porphyrin (TPPS) were observed upon interaction with acid-activated montmorillonite clay (MMT-K10). A panel of characterization techniques, including UV-visible, electronic circular dichroism, IR, and vibrational circular dichroism spectroscopies, as well as X-ray scattering, were employed to investigate the aggregation of the confined TPPS and TCPP. An intriguing and persistent negative exciton effect was detected in the electronic circular dichroism spectra at the early stages of J-aggregation. The enrichment of a right-handed quartz impurity in the clay detected by vibrational circular dichroism may explain the symmetry breaking in the porphyrin assemblies. As a result, we propose that chiral porphyrin aggregates could serve as innovative probes for detecting subtle chirality in inorganic nanomaterials.

Tin(IV)Porphyrin-Based Porous Coordination Polymers as Efficient Visible Light Photocatalyst for Wastewater Remediation

Two porphyrin-based polymeric frameworks, SnP-BTC and SnP-BTB, as visible light photocatalysts for wastewater remediation were prepared by the solvothermal reaction of trans-dihydroxo-[5,15,10,20-tetrakis(phenyl)porphyrinato]tin(IV) (SnP) with 1,3,5-benzenetricarboxylic acid (H3BTC) and 1,3,5-tris(4-carboxyphenyl)benzene (H3BTB), respectively. The strong bond between the carboxylic acid group of H3BTC and H3BTB with the axial hydroxyl moiety of SnP leads to the formation of highly stable polymeric architectures. Incorporating the carboxylic acid group onto the surface of SnP changes the conformational frameworks as well as produces rigid structural transformation that includes permanent porosity, good thermodynamic stability, interesting morphology, and excellent photocatalytic degradation activity against AM dye and TC antibiotic under visible light irradiation. The photocatalytic degradation activities of AM dye were found to be 95% by SnP-BTB and 87% by SnP-BTC within 80 min. Within 60 min of visible light exposure, the photocatalytic degradation activities of TC antibiotic were found to be 70% by SnP-BTB and 60% by SnP-BTC. The enhanced catalytic photodegradation performances of SnP-BTB and SnP-BTC were attributed to the synergistic effect between SnP and carboxylic acid groups. The carboxylic acid connectors strongly resist the separation of SnP from the surface of SnP-BTB and SnP-BTC during the photodegradation experiments. Therefore, the high degradation rate and low catalyst loading make SnP-BTB or SnP-BTC more efficient than other reported catalysts. Thus, the present investigations on the porphyrin-based photocatalysts hold great promise in tackling the treatment of dyeing wastewater.

Redox-Bipolar Covalent Organic Framework Cathode for Advanced Sodium-Organic Batteries

Redox-active covalent organic frameworks (COFs) are promising candidates for sodium-ion batteries (SIBs). However, the construction of redox-bipolar COFs with the anions and cations co-storage feature for SIBs is rarely reported. Herein, redox-bipolar COF constructed from aniline-fused quinonoid units (TPAD-COF) is developed as the cathode material in SIBs for the first time. The unique integration of conductive aniline skeletons and quinone redox centers endows TPAD-COF with high ionic/electrical conductivity, abundant redox-active sites, and fascinating bipolar features. Consequently, the elaborately tailored TPAD-COF cathode exhibits higher specific capacity (186.4 mAh g-1 at 0.05 A g-1) and superior cycling performance (over 2000 cycles at 1.0 A g-1 with 0.015% decay rate per cycle). Impressively, TPAD-COF also displays a high specific capacity of 101 mAh g-1 even at -20 °C. As a proof of concept, all-organic SIBs (AOSIBs) are assembled using TPAD-COF cathode and disodium terephthalate anode, which also show impressive electrochemical properties, indicating the potential application of TPAD-COF cathode in AOSIBs. The work will pave the avenue toward advanced COFs cathode for rechargeable batteries through rational molecular design.

Tuning interlayer stacking of 2D covalent organic frameworks for high-resolution separation of C8 aromatic isomers

Covalent organic frameworks (COFs) has shown great potential as stationary phase in gas chromatography separation. However, designing COF stationary phases with high separation performance remains challenging. Here, we report a novel strategy to enhance the separation ability of COF stationary phases through tuning the interlayer stacking of COF. A rare interlayer modulation of 2D COFs from eclipsed-AA to slipped-AA was achieved through a two-step synthesis method. Simply changing the solvent used in step 1 allowed an interlayer modulation from slipped-AA to eclipsed-AA. As the proof-of-concept, 5,10,15,20-tetrakis(4-aminophenyl)-21H,23H-porphyrin (Tph) and 2,5-dihydroxyterephthalaldehyde (DHTA) were condensed to prepare 2D COF Tph-DHTA. The interlayer stacking of the 2D COF Tph-DHTA was tuned from eclipsed-AA model to slipped-AA by changing the solvent from o-dichlorobenzene + n-butanol (3:1, v/v) to tetrahydrofuran + n-butanol (1:7, v/v) in step 1. The as-prepared Tph-DHTA with slipped-AA stacking (s-Tph-DHTA) showed higher resolution and faster separation of C8 aromatic isomers than that with eclipsed-AA stacking (e-Tph-DHTA). The formation of slipping stacking of s-Tph-DHTA facilitated the thermodynamics, but did not affect the mass transfer resistance for the separation of C8 aromatic isomers. This work not only provides a promising way to modulate the stacking structure of COFs, but also opens a new strategy to design COF stationary phases for the separation of intractable isomers.

Photons, Excitons, and Electrons in Covalent Organic Frameworks

Covalent organic frameworks (COFs) are created by the condensation of molecular building blocks and nodes to form two-dimensional (2D) or three-dimensional (3D) crystalline frameworks. The diversity of molecular building blocks with different properties and functionalities and the large number of possible framework topologies open a vast space of possible well-defined porous architectures. Besides more classical applications of porous materials such as molecular absorption, separation, and catalytic conversions, interest in the optoelectronic properties of COFs has recently increased considerably. The electronic properties of both the molecular building blocks and their linkage chemistry can be controlled to tune photon absorption and emission, to create excitons and charge carriers, and to use these charge carriers in different applications such as photocatalysis, luminescence, chemical sensing, and photovoltaics. In this Perspective, we will discuss the relationship between the structural features of COFs and their optoelectronic properties, starting with the building blocks and their chemical connectivity, layer stacking in 2D COFs, control over defects and morphology including thin film synthesis, exploring the theoretical modeling of structural, electronic, and dynamic features of COFs, and discussing recent intriguing applications with a focus on photocatalysis and photoelectrochemistry. We conclude with some remarks about present challenges and future prospects of this powerful architectural paradigm.

Photocatalytic CO2 Reduction to Solar Fuels by a Chemically Stable Bimetallic Porphyrin-Based Framework

Porphyrin-based photocatalysts have emerged as promising candidates for facilitating carbon dioxide (CO2) reduction due to their exceptional light-harvesting properties. However, their performance is hindered by complex synthesis procedures, limited structural stability, inadequate CO2 activation capabilities, and a lack of comprehensive structure-property relationships. This study investigates the performance of a porphyrin-based bimetallic framework, [Cu(TPP)Cu2Mo3O11] (TPP = tetrapyridylporphyrin), termed MoCu-1 for photocatalytic CO2 reduction. In addition to its straightforward one-pot synthesis method, the framework shows remarkable chemical stability, particularly notable in alkaline reaction conditions, making it a compelling option for sustainable catalytic applications. By harnessing the superior photoabsorption properties of the porphyrin linker and the abundance of catalytic sites provided by the bimetallic structure, this framework exhibits the potential for enhancing CO2 reduction efficiency. MoCu-1 demonstrates excellent activity in converting CO2 into CO, achieving a maximum yield of 3.21 mmol g-1 with a selectivity of ∼93%. We unravel the intricate interplay of structural features and catalytic activity through systematic characterization techniques and an in situ diffuse reflectance Fourier transform study, which provided insights into the mechanism governing CO2 conversion and was supported by density functional theory calculations. This work contributes to advancing our understanding of photocatalytic processes and offers guidance for designing robust materials for CO2 utilization in renewable energy applications.

Constructing 2D Phthalocyanine Covalent Organic Framework with Enhanced Stability and Conductivity via Interlayer Hydrogen Bonding as Electrocatalyst for CO2 Reduction

Fabricating COFs-based electrocatalysts with high stability and conductivity still remains a great challenge. Herein, 2D polyimide-linked phthalocyanine COF (denoted as NiPc-OH-COF) is constructed via solvothermal reaction between tetraanhydrides of 2,3,9,10,16,17,23,24-octacarboxyphthalocyaninato nickel(II) and 2,5-diamino-1,4-benzenediol (DB) with other two analogous 2D COFs (denoted as NiPc-OMe-COF and NiPc-H-COF) synthesized for reference. In comparison with NiPc-OMe-COF and NiPc-H-COF, NiPc-OH-COF exhibits enhanced stability, particularly in strong NaOH solvent and high conductivity of 1.5 × 10-3 S m-1 due to the incorporation of additional strong interlayer hydrogen bonding interaction between the O-H of DB and the hydroxy "O" atom of DB in adjacent layers. This in turn endows the NiPc-OH-COF electrode with ultrahigh CO2-to-CO faradaic efficiency (almost 100%) in a wide potential range from -0.7 to -1.1 V versus reversible hydrogen electrode (RHE), a large partial CO current density of -39.2 mA cm-2 at -1.1 V versus RHE, and high turnover number as well as turnover frequency, amounting to 45 000 and 0.76 S-1 at -0.80 V versus RHE during 12 h lasting measurement.

Covalent Organic Frameworks: Linkage Chemistry and Its Critical Role in The Evolution of π Electronic Structures and Functions

Covalent organic frameworks (COFs) provide a molecular platform for designing a novel class of functional materials with well-defined structures. A crucial structural parameter is the linkage, which dictates how knot and linker units are connected to form two-dimensional polymers and layer frameworks, shaping ordered π-array and porous architectures. However, the roles of linkage in the development of ordered π electronic structures and functions remain fundamental yet unresolved issues. Here we report the designed synthesis of COFs featuring four representative linkages: hydrazone, imine, azine, and C=C bonds, to elucidate their impacts on the evolution of π electronic structures and functions. Our observations revealed that the hydrazone linkage provides a non-conjugated connection, while imine and azine allow partial π conjugation, and the C=C bond permits full π-conjugation. Importantly, the linkage profoundly influences the control of π electronic structures and functions, unraveling its pivotal role in determining key electronic properties such as band gap, frontier energy levels, light absorption, luminescence, carrier density and mobility, and magnetic permeability. These findings highlight the significance of linkage chemistry in COFs and offer a general and transformative guidance for designing framework materials to achieve electronic functions.

Downsizing Porphyrin Covalent Organic Framework Particles Using Protected Precursors for Electrocatalytic CO2 Reduction

Covalent organic frameworks (COFs) are promising electrocatalyst platforms owing to their designability, porosity, and stability. Recently, COFs with various chemical structures are developed as efficient electrochemical CO2 reduction catalysts. However, controlling the morphology of COF catalysts remains a challenge, which can limit their electrocatalytic performance. Especially, while porphyrin COFs show promising catalytic properties, their particle size is mostly large and uncontrolled because of the severe aggregation of crystallites. In this work, a new synthetic methodology for rationally downsized COF catalyst particles is reported, where a tritylated amine is employed as a novel protected precursor for COF synthesis. Trityl protection provides high solubility to a porphyrin precursor, while its deprotection proceeds in situ under typical COF synthesis conditions. Subsequent homogeneous nucleation and colloidal growth yield smaller COF particles than a conventional synthesis, owing to suppressed crystallite aggregation. The downsized COF particles exhibit superior catalytic performance in electrochemical CO2 reduction, with higher CO production rate and faradaic efficiency compared to conventional COF particles. The improved performance is attributed to the higher contact area with a conductive agent. This study reveals particle size as an important factor for the evaluation of COF electrocatalysts and provides a strategy to control it.

Robust links in photoactive covalent organic frameworks enable effective photocatalytic reactions under harsh conditions

Developing heterogeneous photocatalysts for the applications in harsh conditions is of high importance but challenging. Herein, by converting the imine linkages into quinoline groups of triphenylamine incorporated covalent organic frameworks (COFs), two photosensitive COFs, namely TFPA-TAPT-COF-Q and TFPA-TPB-COF-Q, are successfully constructed. The obtained quinoline-linked COFs display improved stability and photocatalytic activity, making them suitable photocatalysts for photocatalytic reactions under harsh conditions, as verified by the recyclable photocatalytic reactions of organic acid involving oxidative decarboxylation and organic base involving benzylamine coupling. Under strong oxidative condition, the quinoline-linked COFs show a high efficiency up to 11831.6 μmol·g-1·h-1 and a long-term recyclable usability for photocatalytic production of H2O2, while the pristine imine-linked COFs are less catalytically active and easily decomposed in these harsh conditions. The results demonstrate that enhancing the linkage robustness of photoactive COFs is a promising strategy to construct heterogeneous catalysts for photocatalytic reactions under harsh conditions.

Bimetallic Porphyrin-Based Metal-Organic Framework as a Superior Photocatalyst for Enhanced Photocatalytic Hydrogen Production

The meaningful and rational engineering of porphyrin-based catalysts with multimetallic active sites is very attractive toward photocatalytic hydrogen generation from water decomposition. Herein, three metal organic frameworks (MOFs) based on meso-tetrakis(4-carboxylphenyl)porphyrin (TCPP) were successfully constructed under solvothermal conditions. As a novel architectured photocatalyst (triclinic, C48H29N4O10PdYb), Pd/Yb-PMOF manifested diverse metal active sites, suitable bandgap positions, prominent visible light-collecting capacity, excellent carrier transfer efficiency, and obvious synergistic effect between ytterbium and palladium ions. Consequently, such a bimetallic MOF exhibited strengthened photocatalytic hydrogen evolution performance. Concretely, its hydrogen generation efficiency was up to 3196.42 μmol g-1 h-1 with 2 wt % Pt as a cocatalyst under visible light illumination. Our work demonstrates a promising strategy for highly efficient visible-light catalysts based on bimetallic-trimmed porphyrin MOFs.

Covalent organic framework-based nanoplatforms with tunable mechanical properties for drug delivery and cancer therapy

Covalent organic frameworks (COFs) are emerging crystalline porous materials composed of covalently linked and periodically arranged organic molecules, which exhibit mechanical properties mediated by structural diversity. Meanwhile, the tunable mechanical properties of COFs have been widely applied in drug delivery and cancer therapy. Herein, we first summarize the regulation strategies of COFs with different mechanical strengths, such as structural dimensions, pore sizes, and host-guest interaction forces. Then, the remarkable achievements of COFs with different mechanical properties in drug delivery and cancer therapy in recent years are introduced. Finally, the mechanical strength regulation of COFs and the remaining challenges for biomedical applications are presented. This review provides a more comprehensive understanding of the application of COFs systems with tunable mechanical properties in the field of biomedicine, and promotes the development of interdisciplinary research between COFs materials and nanomedicine.

Design, Synthesis, and Ultrafast Carrier Dynamics of Core-Substituted Naphthalene Diimide-Based Covalent Organic Frameworks

A series of two-dimensional polyimide covalent organic frameworks (2D COF) based on core-substituted naphthalene diimides (cNDIs) were designed and synthesized with the characteristic of tunable bandgap without global structural changes. Cyclic voltammetry (CV) and DFT calculations indicated that COFcNDI-OEt and COFcNDI-SEt possess higher HOMO/LUMO levels and narrower bandgaps than COFNDI-H. Further investigation indicated that the COF bandgaps are not only related to the electron-donating substituents but also varied with respect to the interlayer distances. Moreover, the femtosecond transient absorption (TA) spectra manifested that the electron donor substituents are beneficial to the charge delocalization in the π-columnar unit, resulting in a longer lifetime of charge recombination, which is one of the pivotal prerequisites for high-performance solar cells and photocatalysis.

Nanoarchitectonics of nitric oxide releasing supramolecular structures for enhanced antibacterial efficacy under visible light irradiation

Light-controlled therapies offer a promising strategy to prevent and suppress infections caused by numerous bacterial pathogens. Excitation of exogenously supplied photosensitizers (PS) at specific wavelengths elicits levels of reactive oxygen intermediates toxic to bacteria. Porphyrin-based supramolecular nanostructure frameworks (SNF) are effective PS with unique physicochemical properties that have led to their widespread use in photomedicine. Herein, we developed a nitric oxide (NO) releasing, biocompatible, and stable porphyrin-based SNF (SNF-NO), which was achieved through a confined noncovalent self-assembly process based on π-π stacking. Characterization of the SNFs via scanning electron microscopy (SEM) and transmission electron microscopy (TEM) analysis showed the formation of three-dimensional, well-defined octahedral structures. These SNF-NO were shown to exhibit a red shift due to the noncovalent self-assembly of porphyrins, which also show extended light absorption to broadly cover the entire visible light spectrum to enhance photodynamic therapy (PDT). Under visible light irradiation (46 J cm-2), the SNF generates high yields of singlet oxygen (1O2) radicals, hydroxyl radicals (HO), superoxide radicals (O2), and peroxynitrite (ONOO-) radicals that have shown potential to enhance antimicrobial photodynamic therapy (APDT) against Gram-positive methicillin-resistant Staphylococcus aureus (MRSA) and Gram-negative Escherichia coli (E. coli). The resulting SNFs also exhibit significant biofilm dispersion and a decrease in biomass production. The combination of robust photosensitizer SNFs with nitric oxide-releasing capabilities is dynamic in its ability to target pathogenic infections while remaining nontoxic to mammalian cells. The engineered SNFs have enormous potential for treating and managing microbial infections.

Biomimetic Approach toward Visible Light-Driven Hydrogen Generation Based on a Porphyrin-Based Coordination Polymer Gel

There has been a widespread interest in developing self-assembled porphyrin nanostructures to mimic nature's light-harvesting processes. Herein, porphyrin-based coordination polymer gel (CPG) has been developed as a "soft" photocatalyst material for hydrogen (H₂) production from water under visible light. The CPG offers a hierarchical nanofibrous network structure obtained through self-assembly of a terpyridine alkyl-amide appended porphyrin (TPY-POR)-based low molecular weight gelator with ruthenium ions (Ru^II) and produces H₂ with a rate of 5.7 mmol g^-1 h^-1 in the presence of triethylamine (TEA) as a sacrificial electron donor. Further, the [Fe₂(bdt)(CO)₆] (dbt = 1,2-benzenedithiol) cocatalyst, which can mimic the activity of iron hydrogenase, is coassembled in the CPG and shows remarkable improvement in H₂ evolution (catalytic activity; rate ∼10.6 mmol g^-1 h^-1 and turnover number ∼1287). The significant enhancement in catalytic activity was supported by several controlled experiments, including femtosecond transient absorption (TA) spectroscopy and also DFT calculation. The TA study supported the cascade electron transfer process from porphyrin core to [Ru(TPY)₂]²⁺ center, and subsequently, the electron transfers to the cocatalyst [Fe₂(bdt)(CO)₆] for H₂ production.

S-Scheme Porphyrin Covalent Organic Framework Heterojunction for Boosted Photoelectrochemical Immunoassays in Myocardial Infarction Diagnosis

Cardiac troponin I (cTnI) is an extremely sensitive biomarker for early indication of acute myocardial infarction (AMI). However, it still remains a tough challenge for many newly developed cTnI biosensors to achieve superior sensing performance including high sensitivity, rapid detection, and resistance to interference in clinical serum samples. Herein, a novel photocathodic immunosensor toward cTnI sensing has been successfully developed by designing a unique S-scheme heterojunction based on the porphyrin-based covalent organic frameworks (p-COFs) and p-type silicon nanowire arrays (p-SiNWs). In the novel heterojunction, the p-SiNWs are employed as the photocathode platform to acquire a strong photocurrent response. The in situ-grown p-COFs can accelerate the spatial migration rate of charge carriers by forming proper band alignment with the p-SiNWs. The crystalline π-conjugated network of p-COFs with abundant amino groups also promotes the electron transfer and anti-cTnI immobilizing process. The developed photocathodic immunosensor demonstrates a broad detection range of 5 pg/mL-10 ng/mL and a low limit of detection (LOD) of 1.36 pg/mL in clinical serum samples. Besides, the PEC sensor owns several advantages including good stability and superior anti-interference ability. By comparing our results with that of the commercial ELISA method, the relative deviations range from 0.06 to 0.18% (n = 3), and the recovery rates range from 95.4 to 109.5%. This work displays a novel strategy to design efficient and stable PEC sensing platforms for cTnI detection in real-life serums and provides guidance in future clinical diagnosis.

Porphyrin-Based Covalent Organic Frameworks: Design, Synthesis, Photoelectric Conversion Mechanism, and Applications

Photosynthesis occurs in high plants, and certain organisms show brilliant technology in converting solar light to chemical energy and producing carbohydrates from carbon dioxide (CO₂). Mimicking the mechanism of natural photosynthesis is receiving wide-ranging attention for the development of novel materials capable of photo-to-electric, photo-to-chemical, and photocatalytic transformations. Porphyrin, possessing a similar highly conjugated core ring structure to chlorophyll and flexible physical and chemical properties, has become one of the most investigated photosensitizers. Chemical modification and self-assembly of molecules as well as constructing porphyrin-based metal (covalent) organic frameworks are often used to improve its solar light utilization and electron transfer rate. Especially porphyrin-based covalent organic frameworks (COFs) in which porphyrin molecules are connected by covalent bonds combine the structural advantages of organic frameworks with light-capturing properties of porphyrins and exhibit great potential in light-responsive materials. Porphyrin-based COFs are expected to have high solar light utilization, fast charge separation/transfer performance, excellent structural stability, and novel steric selectivity by special molecular design. In this paper, we reviewed the research progress of porphyrin-based COFs in the design, synthesis, properties, and applications. We focused on the intrinsic relationship between the structure and properties, especially the photoelectric conversion properties and charge transfer mechanism of porphyrin-based COFs, and tried to provide more valuable information for the design of advanced photosensitizers. The applications of porphyrin-based COFs in photocatalysis and phototherapy were emphasized based on their special structure design and light-to-electric (or light-to-heat) conversion control.

Reversed Regulation Effects of ssDNA on the Mimetic Oxidase and Peroxidase Activities of Covalent Organic Frameworks

Nanomaterials with enzyme mimetic activity have attracted extensive attention, especially in the regulation of their catalytic activities by biomolecules or other polymers. Here, a covalent organic framework (Tph-BT COF) with excellent photocatalytic activity is constructed by Schiff base reaction, and its mimetic oxidase activity and peroxidase activity is inversely regulated via single-stranded DNA (ssDNA). Under light-emitting diode (LED) light irradiation, Tph-BT exhibited outstanding oxidase activity, which efficiently catalyzed oxidation of 3,3',5,5'-tetramethylbenzidine (TMB) to produce blue oxTMB, and ssDNA, especially those with poly-thymidine (T) sequences, can significantly inhibit its oxidase activity. On the contrary, Tph-BT showed weak peroxidase activity, and the presence of ssDNA, particularly poly-cytosine (C) sequences, can remarkably enhance the peroxidase activity. The influence of base type, base length, and other factors on the activities of two enzymes is also studied, and the results reveal that the adsorption of ssDNA on the surface of Tph-BT prevented intersystem crossing (ISC) and energy transfer processes to reduce ¹ O₂ generation, while the electrostatic interaction between ssDNA and TMB enhanced Tph-BT's affinity for TMB to facilitate the electron transfer from TMB to ^• OH. This study investigates multitype mimetic enzyme activities of nonmetallic D-A conjugated COFs and demonstrates their feasibility of regulation by ssDNA.

Connecting the dots for fundamental understanding of structure-photophysics-property relationships of COFs, MOFs, and perovskites using a Multiparticle Holstein Formalism

Photoactive organic and hybrid organic-inorganic materials such as conjugated polymers, covalent organic frameworks (COFs), metal-organic frameworks (MOFs), and layered perovskites, display intriguing photophysical signatures upon interaction with light. Elucidating structure-photophysics-property relationships across a broad range of functional materials is nontrivial and requires our fundamental understanding of the intricate interplay among excitons (electron-hole pair), polarons (charges), bipolarons, phonons (vibrations), inter-layer stacking interactions, and different forms of structural and conformational defects. In parallel with electronic structure modeling and data-driven science that are actively pursued to successfully accelerate materials discovery, an accurate, computationally inexpensive, and physically-motivated theoretical model, which consistently makes quantitative connections with conceptually complicated experimental observations, is equally important. Within this context, the first part of this perspective highlights a unified theoretical framework in which the electronic coupling as well as the local coupling between the electronic and nuclear degrees of freedom can be efficiently described for a broad range of quasiparticles with similarly structured Holstein-style vibronic Hamiltonians. The second part of this perspective discusses excitonic and polaronic photophysical signatures in polymers, COFs, MOFs, and perovskites, and attempts to bridge the gap between different research fields using a common theoretical construct - the Multiparticle Holstein Formalism. We envision that the synergistic integration of state-of-the-art computational approaches with the Multiparticle Holstein Formalism will help identify and establish new, transformative design strategies that will guide the synthesis and characterization of next-generation energy materials optimized for a broad range of optoelectronic, spintronic, and photonic applications.

Advanced Covalent Organic Framework-Based Membranes for Recovery of Ionic Resources

Membrane technology has shown a viable potential in conversion of liquid-waste or high-salt streams to fresh waters and resources. However, the non-adjustability pore size of traditional membranes limits the application of ion capture due to their low selectivity for target ions. Recently, covalent organic frameworks (COFs) have become a promising candidate for construction of advanced ion separation membranes for ion resource recovery due to their low density, large surface area, tunable channel structure, and tailored functionality. This tutorial review aims to analyze and summarize the progress in understanding ion capture mechanisms, preparation processes, and applications of COF-based membranes. First, the design principles for target ion selectivity are illustrated in terms of theoretical simulation of ions transport in COFs, and key properties for ion selectivity of COFs and COF-based membranes. Next, the fabrication methods of diverse COF-based membranes are classified into pure COF membranes, COF continuous membranes, and COF mixed matrix membranes. Finally, current applications of COF-based membranes are highlighted: desalination, extraction, removal of toxic metal ions, radionuclides and lithium, and acid recovery. This review presents promising approaches for design, preparation, and application of COF-based membranes in ion selectivity for recovery of ionic resources.

In Situ Interweaved High Sulfur Loading Li-S Cathode by Catalytically Active Metalloporphyrin Based Organic Polymer Binders

The elaborate design of powerful Li-S binders with extended-functions like polysulfides adsorption/catalysis and Li⁺ hopping/transferring in addition to robust adhesion-property has remained a challenge. Here, an in situ cathode-interweaving strategy based on metalloporphyrin based covalent-bonding organic polymer (M-COP, M = Mn, Ni, and Zn) binders is reported for the first time. Thus-produced functional binders possess excellent mechanical-strengths, polysulfides adsorption/catalysis, and Li⁺ hopping/transferring ability. Specifically, the modulus of Mn-COP can reach up to ≈54.60 GPa (≈40 times higher than poly(vinylidene fluoride)) and the relative cell delivers a high initial-capacity (1027 mAh g^-1 , 1 C and 913 mAh g^-1 , 2 C), and excellent cycling-stability for >1000 cycles even at 4 C. The utilization-rate of sulfur can reach up to 81.8% and the electrodes based on these powerful binders can be easily scale-up fabricated (≈20 cm in a batch-experiment). Noteworthy, Mn-COP based cell delivers excellent capacities at a high sulfur-loading (8.6 mg cm^-2 ) and low E/S ratio (5.8 µL mg^-1 ). In addition, theoretical calculations reveal the vital roles of metalloporphyrin and thiourea-groups in enhancing the battery-performance.

Three-Dimensional van der Waals Heterostructure-Based Nanocages as Supersensitive 3-Hydroxy-2-butanone Gas Sensors at Room Temperature

3-Hydroxy-2-butanone is one of the biomarkers of Listeria monocytogenes, which is quite important for the intelligent detection of 3H-2B. However, it is still a challenge to fabricate sensing materials obtaining excellent sensitivity and selectivity under the ppb-level detection limit. Herein, a plasma-assisted synthetic approach was proposed for the construction of hierarchical nanostructures and the simultaneous loading of TAPP-COFs, which could reduce interlayer interaction and convert the metallized sites on the surface of predesigned porphyrin rings into quantum nanoparticles. These multichannel pathways of Co-TAPP-COFs@SnO₂@MWCNTs nanocages contributed to the gas adsorption and diffusion, thus enhancing the sensing behavior. The nanocages exhibited a highly specific sensing performance toward 3H-2B with the highest sensitivity (R_a/R_g = 100.9 to 0.5 ppm) in all reported sensing materials. The 3H-2B sensor presented outstanding long-term stability, and the detection limit was 100 ppb at room temperature. Furthermore, the synthesized materials were integrated into the sensing module connecting to an Internet of Things platform, providing rapid and real-time detection of 3H-2B. We also applied machine learning methods to analyze the nanocage-based sensors and found that the combined effects of modified sites on the heterointerfaces contributed to the improvement of the sensing performance.

Integrated interfacial design of covalent organic framework photocatalysts to promote hydrogen evolution from water

Attempts to develop photocatalysts for hydrogen production from water usually result in low efficiency. Here we report the finding of photocatalysts by integrated interfacial design of stable covalent organic frameworks. We predesigned and constructed different molecular interfaces by fabricating ordered or amorphous π skeletons, installing ligating or non-ligating walls and engineering hydrophobic or hydrophilic pores. This systematic interfacial control over electron transfer, active site immobilisation and water transport enables to identify their distinct roles in the photocatalytic process. The frameworks, combined ordered π skeletons, ligating walls and hydrophilic channels, work under 300-1000 nm with non-noble metal co-catalyst and achieve a hydrogen evolution rate over 11 mmol g^-1 h^-1, a quantum yield of 3.6% at 600 nm and a three-order-of-magnitude-increased turnover frequency of 18.8 h^-1 compared to those obtained with hydrophobic networks. This integrated interfacial design approach is a step towards designing solar-to-chemical energy conversion systems.

Structural control of self-assembled peptide nanostructures to develop peptide vesicles for photodynamic therapy of cancer

Vesicles such as liposomes, polymersomes, and exosomes have been widely used as drug delivery carriers; however, peptide vesicles (peptidesomes) despite their potential utility are far less well developed. Peptidesomes are distinctive because peptides play dual roles as a self-assembly building block and a bioactive functional unit. In order for peptidesomes to become successful nanodrugs, the issues related to differences in nanostructural properties between in vitro and in vivo conditions should be addressed. Here, we delineate a multivariate approach to feedback control the structures of peptide building blocks, nanoparticle size, drug loading process, nanoparticle aggregation, cytotoxicity, cell targeting capability, endosome disruption function, protease resistance, and in vivo performance, which eventually enabled the successful development of a highly efficacious peptidesome for in vivo cancer therapy. This study lays the groundwork for the successful in vivo translation of peptide nanodrugs.

Linker Engineering of 2D Imine Covalent Organic Frameworks for the Heterogeneous Palladium-Catalyzed Suzuki Coupling Reaction

Covalent organic frameworks (COFs) are an emerging class of porous organic polymers that have been utilized as scaffolds for anchoring metal active species to act as heterogeneous catalysts. Though several examples of such COFs exist, a thorough experimental and computational analysis on such catalysts is limited. In this work, a series of two-dimensional (2D) imine COFs (TTA-DFB COF (N), TTA-TBD COF (N∧O), and TTA-DFP COF(N∧N)) were synthesized by using suitable building units to obtain three different coordination sites (N, N∧O, and N∧N). These were post-modified with Pd(II) to catalyze the Suzuki-Miyaura coupling reaction. Pd@TTA-DFB COF, where Pd(II) was coordinated to N sites, showed the fastest reactivity and lower stability. Pd@TTA-DFP COF showed highest stability but slowest reactivity. Pd@TTA-TBD COF was the best among the three with both high stability and fast reactivity. By combining both experimental and computational results, we conclude that the Pd(II) to Pd(0) reduction is a key step in the difference between the catalytic reactivities of the three COFs. This study demonstrates the importance of the building block approach to design COFs for efficient heterogeneous catalysis and to understand the fate of the reaction profile.

Programmable Bispecific Nano-immunoengager That Captures T Cells and Reprograms Tumor Microenvironment

Immune checkpoint blockade (ICB) therapy has revolutionized clinical oncology. However, the efficacy of ICB therapy is limited by the ineffective infiltration of T effector (T_eff) cells to tumors and the immunosuppressive tumor microenvironment (TME). Here, we report a programmable tumor cells/T_eff cells bispecific nano-immunoengager (NIE) that can circumvent these limitations to improve ICB therapy. The peptidic nanoparticles (NIE-NPs) bind tumor cell surface α₃β₁ integrin and undergo in situ transformation into nanofibrillar network nanofibers (NIE-NFs). The prolonged retained nanofibrillar network at the TME captures T_eff cells via the activatable α₄β₁ integrin ligand and allows sustained release of resiquimod for immunomodulation. This bispecific NIE eliminates syngeneic 4T1 breast cancer and Lewis lung cancer models in mice, when given together with anti-PD-1 antibody. The in vivo structural transformation-based supramolecular bispecific NIE represents an innovative class of programmable receptor-mediated targeted immunotherapeutics to greatly enhance ICB therapy against cancers.

Photo- and radio-luminescence of porphyrin functionalized ZnO/SiO2 nanoparticles

The development of hybrid nanoscintillators is hunted for the implementation of modern detection technologies, like in high energy physics, homeland security, radioactive gas sensing, and medical imaging, as well as of the established therapies in radiation oncology, such as in X-ray activated photodynamic therapy. Engineering of the physico-chemical properties of nanoparticles (NPs) enables the manufacture of hybrids in which the conjugation of inorganic/organic components leads to increased multifunctionality and performance. However, the optimization of the properties of nanoparticles in combination with the use of ionizing radiation is not trivial: a complete knowledge on the structure, composition, physico-chemical features, and scintillation property relationships in hybrid nanomaterials is pivotal for any applications exploiting X-rays. In this paper, the design of hybrid nanoscintillators based on ZnO grown onto porous SiO₂ substrates (ZnO/SiO₂) has been performed in the view to create nanosystems potentially suitable in X-ray activated photodynamic therapy. Indeed, cytotoxic porphyrin dyes with increasing concentrations have been anchored on ZnO/SiO₂ nanoparticles through amino-silane moieties. Chemical and structural analyses correlated with photoluminescence reveal that radiative energy transfer between ZnO and porphyrins is the principal mechanism prompting the excitation of photosensitizers. The use of soft X-ray excitation results in a further sensitization of the porphyrin emission, due to augmented energy deposition promoted by ZnO in the surroundings of the chemically bound porphyrin. This finding unveils the cruciality of the design of hybrid nanoparticles in ruling the efficacy of the interaction between ionizing radiation and inorganic/organic moieties, and thus of the final nanomaterial performances towards the foreseen application.

Nitric-Oxide-Releasing aza-BODIPY: A New Near-Infrared J-Aggregate with Multiple Antibacterial Modalities

The development of near-infrared (NIR) J-aggregates has received increasing attention due to their broad applications. Here, we report the nitrosation of an amine-containing aza-BODIPY precursor (BDP-NH₂ ), affording the first nitric oxide (NO)-releasing NIR J-aggregate (BDP-NO). The introduction of N-nitrosamine moieties efficiently inhibits the aromatic interactions of BDP-NH₂ , which instead promotes the formation of J-aggregates within micellar nanoparticles with a remarkable bathochromic shift of ≈109 nm to the NIR window (820 nm). Interestingly, the NO release and photothermal conversion efficiency (PTCE) can be delicately tuned by the loading contents of BDP-NO within micellar nanoparticles, thereby enabling multiple antibacterial modalities by exploring either NO release, photothermal therapy (PTT), or both. We demonstrate the combination of NO and PTT can elevate antibacterial activity while attenuating PTT-associated inflammation for the in vivo treatment of MRSA infection.

Acridine-Functionalized Covalent Organic Frameworks (COFs) as Photocatalysts for Metallaphotocatalytic C-N Cross-Coupling

Covalent organic frameworks (COFs) are structurally tuneable, porous and crystalline polymers constructed through the covalent attachment of small organic building blocks as elementary units. Using the myriad of such building blocks, a broad spectrum of functionalities has been applied for COF syntheses for broad applications, including heterogeneous catalysis. Herein, we report the synthesis of a new family of porous and crystalline COFs using a novel acridine linker and benzene-1,3,5-tricarbaldehyde derivatives bearing a variable number of hydroxy groups. With the broad absorption in the visible light region, the COFs were applied as photocatalysts in metallaphotocatalytic C-N cross-coupling. The fully β-ketoenamine linked COF showed the highest activity, due to the increased charge separation upon irradiation. The COF showed good to excellent yields for several aryl bromides, good recyclability and even catalyzed the organic transformation in presence of green light as energy source.

The effect of charge on Zn tetra morpholine porphyrin conjugated to folic acid-nitrogen doped graphene quantum dots for photodynamic therapy studies

Zinc tetra morpholine porphyrin (complex 2), and its quaternized derivative (complex 3) were synthesized and conjugated to folic acid nitrogen doped graphene quantum dots (FA-NGQDs) through π-π stacking to study their photodynamic therapy (PDT) efficacy. Photophysiochemical properties of complexes 2, 3, and their conjugates (2-FA-NGQDs, 3-FA-NGQDs) were studied. It was found that complex 3 had higher ϕ_Δ of 0.56 compared to complex 2 with ϕ_Δ of 0.24, and respective composites: 3-FA-NGQDs had higher ϕ_Δ compared to 2-FA-NGQDs. The PDT studies were conducted for nanoparticles (FA-NGQDs), complexes (2, 3), and respective composites (2-FA-NGQDs, and 3-FA-NGQDs) using MCF-7 breast cancer cell. Dark toxicity of all compounds was above 90% which is negligible. At a highest concentration of 40 µg/mL, 3-FA-NGQDs gave the lowest cell viability of 28% compared to all other conjugates and porphyrins alone.

Visible-Light-Driven Photocatalytic CO2 Reduction to CO/CH4 Using a Metal-Organic "Soft" Coordination Polymer Gel

The self-assembly of a well-defined and astutely designed, low-molecular weight gelator (LMWG) based linker with a suitable metal ion is a promising method for preparing photocatalytically active coordination polymer gels. Here, we report the design, synthesis, and gelation behaviour of a tetrapodal LMWG based on a porphyrin core connected to four terpyridine units (TPY-POR) through amide linkages. The self-assembly of TPY-POR LMWG with Ru^II ions results in a Ru-TPY-POR coordination polymer gel (CPG), with a nanoscroll morphology. Ru-TPY-POR CPG exhibits efficient CO₂ photoreduction to CO (3.5 mmol g^-1  h^-1 ) with >99 % selectivity in the presence of triethylamine (TEA) as a sacrificial electron donor. Interestingly, in the presence of 1-benzyl-1,4-dihydronicotinamide (BNAH) with TEA as the sacrificial electron donor, the 8e^- /8H⁺ photoreduction of CO₂ to CH₄ is realized with >95 % selectivity (6.7 mmol g^-1  h^-1 ). In CPG, porphyrin acts as a photosensitizer and covalently attached [Ru(TPY)₂ ]²⁺ acts as a catalytic center as demonstrated by femtosecond transient absorption (TA) spectroscopy. Further, combining information from the in situ DRIFT spectroscopy and DFT calculation, a possible reaction mechanism for CO₂ reduction to CO and CH₄ was outlined.

Extremely large electrooptic effect of the TPPS J-aggregates in PVA, PVP polymer matrix and aqueous solution

The molecules of tetra-phenyl porphyrin tetra-sulfonic acid (TPPS) form a J-aggregate by self-organization in aqueous solution. The J-aggregates composed in an aqueous solution added with hydrochloric acid were dispersed in...

Thiophene-Based Covalent Organic Frameworks: Synthesis, Photophysics and Light-Driven Applications

Porous crystalline materials, such as covalent organic frameworks (COFs), have emerged as some of the most important materials over the last two decades due to their excellent physicochemical properties such as their large surface area and permanent, accessible porosity. On the other hand, thiophene derivatives are common versatile scaffolds in organic chemistry. Their outstanding electrical properties have boosted their use in different light-driven applications (photocatalysis, organic thin film transistors, photoelectrodes, organic photovoltaics, etc.), attracting much attention in the research community. Despite the great potential of both systems, porous COF materials based on thiophene monomers are scarce due to the inappropriate angle provided by the latter, which hinders its use as the building block of the former. To circumvent this drawback, researchers have engineered a number of thiophene derivatives that can form part of the COFs structure, while keeping their intrinsic properties. Hence, in the present minireview, we will disclose some of the most relevant thiophene-based COFs, highlighting their basic components (building units), spectroscopic properties and potential light-driven applications.

Controllable Synthesis and Performance Modulation of 2D Covalent-Organic Frameworks

Covalent-organic frameworks (COFs) are especially interesting and unique as their highly ordered topological structures entirely built from plentiful π-conjugated units through covalent bonds. Arranging tailorable organic building blocks into periodically reticular skeleton bestows predictable lattices and various properties upon COFs in respect of topology diagrams, pore size, properties of channel wall interfaces, etc. Indeed, these peculiar features in terms of crystallinity, conjugation degree, and topology diagrams fundamentally decide the applications of COFs including heterogeneous catalysis, energy conversion, proton conduction, light emission, and optoelectronic devices. Additionally, this research field has attracted widespread attention and is of importance with a major breakthrough in recent year. However, this research field is running with the lack of summaries about tailorable construction of 2D COFs for targeted functionalities. This review first covers some crucial polymeric strategies of preparing COFs, containing boron ester condensation, amine-aldehyde condensation, Knoevenagel condensation, trimerization reaction, Suzuki CC coupling reaction, and hybrid polycondensation. Subsequently, a summary is made of some representative building blocks, and then underlines how the electronic and molecular structures of building blocks can strongly influence the functional performance of COFs. Finally, conclusion and perspectives on 2D COFs for further study are proposed.