Electrocatalytic Nanoparticles That Mimic the Three-Dimensional Geometric Architecture of Enzymes: Nanozymes

Nanozyme-Enabled Biomedical Diagnosis: Advances, Trends, and Challenges

As nanoscale materials with the function of catalyzing substrates through enzymatic kinetics, nanozymes are regarded as potential alternatives to natural enzymes. Compared to protein-based enzymes, nanozymes exhibit attractive characteristics of low preparation cost, robust activity, flexible performance adjustment, and versatile functionalization. These advantages endow them with wide use from biochemical sensing and environmental remediation to medical theranostics. Especially in biomedical diagnosis, the feature of catalytic signal amplification provided by nanozymes makes them function as emerging labels for the detection of biomarkers and diseases, with rapid developments observed in recent years. To provide a comprehensive overview of recent progress made in this dynamic field, here an overview of biomedical diagnosis enabled by nanozymes is provided. This review first summarizes the synthesis of nanozyme materials and then discusses the main strategies applied to enhance their catalytic activity and specificity. Subsequently, representative utilization of nanozymes combined with biological elements in disease diagnosis is reviewed, including the detection of biomarkers related to metabolic, cardiovascular, nervous, and digestive diseases as well as cancers. Finally, some development trends in nanozyme-enabled biomedical diagnosis are highlighted, and corresponding challenges are also pointed out, aiming to inspire future efforts to further advance this promising field.

An Array of Glucose Nanozymes That Can Selectively Detect Glucose in Whole Blood

Achieving sensors that can sensitively and selectively quantify levels of analytes in complex biofluids such as blood remains a significant challenge. To address this, we synthesized an array of isolated carbon nanochannels on a flat gold electrode that function as molecular sieves to prevent protein fouling and eliminate the need for antifouling layers. Utilizing a two-step pulsed technique, a reductive pulse expels negative interferences and fouling molecules followed by an oxidative pulse that oxidizes glucose at the bottom of the channel and on the gold surface. The nanoconfined environment created by the top carbon nanochannel layer (6 nm diameter, 21 nm length confirmed by TEM and SEM), with redox pulses enabled the gold catalytic center to generate hydroxide ions, fostering a higher pH environment favorable for glucose oxidation. The nonenzymatic approach to detecting glucose was shown to give equivalent data directly in whole blood to that achieved by using an enzyme blood glucose meter determined using a Clark Error Grid. This simplified sensor design, suitable for wearable systems, offers a solution for glucose monitoring in complex biofluids with a far greater stability over time.

A molecularly imprinted electrochemiluminescence sensor based on mimic enzyme ZIF-90 and MnO2/g-C3N4 magnetic particles for detection of methidathion

Methidathion (MTDT), a common organophosphorus pesticide with high insecticidal activity, is widely used for pest control. However, the misuse of MTDT leads to widespread residues and endangers human health. Therefore, it is crucial to develop a simple and highly sensitive method for the detection of MTDT residues. Herein, ZIF-90/MnO2/g-C3N4/Fe3O4 composite particles were synthesized: The  MnO2 nanosheets could absorb the energy of the excited g-C3N4 to quench the ECL of g-C3N4 while ZIF-90 acted as a mimetic enzyme to catalyze the formation of thiocholine from MTDT. The thiocholine caused the reduction of MnO2 to Mn2+, restoring the ECL signal of g-C3N4. Combined with molecular imprinting technique, an electrochemiluminescence sensor was constructed for the determination of MTDT. The determination range was 1.00 × 10-9 ~ 7.00 × 10-7 g/L, and the detection limit was 6.58 × 10-10 g/L. Structurally similar organophosphorus pesticides showed no cross-reactivity. The method has high sensitivity and specificity, and has been successfully applied to the determination of MTDT residue in fruits with recoveries in the range 93.75% ~ 102.37%.

A Smartphone-Mediated "All-In-One" Biosensing Chip for Visual and Value-Assisted Detection

A smartphone-mediated self-powered biosensor is fabricated for miRNA-141 detection based on the CRISPR/Cas12a cross-cutting technique and a highly efficient nanozyme. As a novel nanozyme and a signal-amplified coreaction accelerator, the AuPtPd@GDY nanozyme exhibits an excellent ability to catalyze cascade color reactions and high conductivity to enhance the electrochemical signal for miRNA-141 assays. After CRISPR/Cas12a cross-cutting of S2-glucose oxidase (S2-GOD), the electrochemical signal is weakened, and miRNA-141 is detected by monitoring the decrease in the signal. On the other hand, a cascade reaction among glucose, H2O2, and TMB is catalyzed by GOD and AuPtPd@GDY, respectively, resulting in a color change of the solution, which senses miRNA-141. The self-powered biosensor enables value-assisted and visual detection of miRNA-141 with limits of detection of 3.1 and 15 aM, respectively. Based on the dual-modal self-powered sensing system, a smartphone-mediated "all-in-one" biosensing chip is designed to achieve the real-time and intelligent monitoring of miRNA-141. This work provides a new approach to design multifunctional biosensors to realize the visualization and portable detection of tumor biomarkers.

Catalytic Nanoparticles in Biomedical Applications: Exploiting Advanced Nanozymes for Therapeutics and Diagnostics

Catalytic nanoparticles (CNPs) as heterogeneous catalyst reveals superior activity due to their physio-chemical features, such as high surface-to-volume ratio and unique optical, electric, and magnetic properties. The CNPs, based on their physio-chemical nature, can either increase the reactive oxygen species (ROS) level for tumor and antibacterial therapy or eliminate the ROS for cytoprotection, anti-inflammation, and anti-aging. In addition, the catalytic activity of nanozymes can specifically trigger a specific reaction accompanied by the optical feature change, presenting the feasibility of biosensor and bioimaging applications. Undoubtedly, CNPs play a pivotal role in pushing the evolution of technologies in medical and clinical fields, and advanced strategies and nanomaterials rely on the input of chemical experts to develop. Herein, a systematic and comprehensive review of the challenges and recent development of CNPs for biomedical applications is presented from the viewpoint of advanced nanomaterial with unique catalytic activity and additional functions. Furthermore, the biosafety issue of applying biodegradable and non-biodegradable nanozymes and future perspectives are critically discussed to guide a promising direction in developing span-new nanozymes and more intelligent strategies for overcoming the current clinical limitations.

Bioelectrocatalytic Activity of One-Dimensional Porous Pt Nanoribbons for Efficient Inhibition of Tumor Growth and Metastasis

Designing and synthesizing one-dimensional porous Pt nanocrystals with unique optical, electrocatalytic, and theranostic properties are gaining lots of attention, especially to overcome the challenges of tumor recurrence and resistance to platinum-based chemotherapy. Herein, we represented an interesting report of a one-step and facile strategy for synthesizing multifunctional one-dimensional (1D) porous Pt nanoribbons (PtNRBs) with highly efficient therapeutic effects on cancer cells based on inherent electrocatalytic activity. The critical point in the formation of luminescent porous PtNRBs was the use of human hemoglobin (Hb) as a shape-regulating, stabilizing, and reducing agent with facet-specific domains on which fluorescent platinum nanoclusters at first are aggregated by aggregation-induced emission phenomena (AIE) and then crystallized into contact and penetration twins, as intermediate products, followed by shaping of the final luminescent porous ribbon nanomaterials, owing to oriented attachment association via the Ostwald ripening mechanism. From a medical point of view, the key strategy for effective cancer therapy occured via using low-dosage ethanol in the presence of electroactive porous PtNRBs based on intracellular ethanol oxidation-mediated reactive oxygen species (ROS) generation. The role of heme groups of Hb, as electrocatalytically active centers, was successfully demonstrated in both kinetically controlled anisotropic growth of NRBs for slowing down the reduction of Pt(II) followed by oligomerization of Pt(II)-Hb complexes via platinophilic interactions as well as electrocatalytic ethanol oxidation for therapy. Interestingly, hyaluronic acid-targeted (HA) Hb-PtNRB in the presence of low-dose ethanol caused extraordinary arrest of tumor growth and metastasis with no recurrence even after the treatment course stopped, which caused elongation of tumor-bearing mice survival. HA/Hb-PtNRB was completely biocompatible and exhibited high tumor-targeting efficacy for fluorescent imaging of breast tumors. Therefore, the synergistic electrocatalytic activity of PtNRBs is presented as an efficient and safe cancer theranostic method for the first time.

Phenylglycine amphiphile-metal ion chiral supramolecular nanozymes for enantioselective catalysis

L/D-Phenylglycine amphiphiles and metal ions with peroxidase-like activity self-assembled into chiral nanoribbons, which act as efficient chiral supramolecular nanozymes for catalyzing the 3,4-dihydroxy-L/D-phenylalanine (L/D-DOPA) oxidation reactions. The catalytic efficiency and enantioselectivity are dominated by the chirality transfer and the synergistic effect between the metal ions and chiral nanoribbons.

Biosystem-Inspired Engineering of Nanozymes for Biomedical Applications

Nanozymes with intrinsic enzyme-mimicking activities have shown great potential to become surrogates of natural enzymes in many fields by virtue of their advantages of high catalytic stability, ease of functionalization, and low cost. However, due to the lack of predictable descriptors, most of the nanozymes reported in the past have been obtained mainly through trial-and-error strategies, and the catalytic efficacy, substrate specificity, as well as practical application effect under physiological conditions, are far inferior to that of natural enzymes. To optimize the catalytic efficacies and functions of nanozymes in biomedical settings, recent studies have introduced biosystem-inspired strategies into nanozyme design. In this review, recent advances in the engineering of biosystem-inspired nanozymes by leveraging the refined catalytic structure of natural enzymes, simulating the behavior changes of natural enzymes in the catalytic process, and mimicking the specific biological processes or living organisms, are introduced. Furthermore, the currently involved biomedical applications of biosystem-inspired nanozymes are summarized. More importantly, the current opportunities and challenges of the design and application of biosystem-inspired nanozymes are discussed. It is hoped that the studies of nanozymes based on bioinspired strategies will be beneficial for constructing the new generation of nanozymes and broadening their biomedical applications.

Approaches to Improving the Selectivity of Nanozymes

Nanozymes mimic enzymes and that includes their selectivity. To achieve selectivity, significant inspiration for nanoparticle design can come from the geometric and molecular features that make enzymes selective catalysts. The two central features enzymes use are control over the arrangement of atoms in the active site and the placing of the active site down a nanoconfined substrate channel. The implementation of enzyme-inspired features has already been shown to both improve activity and selectivity of nanoparticles for a variety of catalytic and sensing applications. The tuning and control of active sites on metal nanoparticle surfaces ranges from simply changing the composition of the surface metal to sophisticated approaches such as the immobilization of single atoms on a metal substrate. Molecular frameworks provide a powerful platform for the implementation of isolated and discrete active sites while unique diffusional environments further improve selectivity. The implementation of nanoconfined substrate channels around these highly controlled active sites offers further ability to control selectivity through altering the solution environment and transport of reactants and products. Implementing these strategies together offers a unique opportunity to improve nanozyme selectivity in both sensing and catalysis.

Exploring the Specificity of Nanozymes

Nanozymes, nanomaterials exhibiting enzyme-like activities, have emerged as a prominent interdisciplinary field over the past decade. To date, over 1200 different nanomaterials have been identified as nanozymes, covering four catalytic categories: oxidoreductases, hydrolases, isomerases, and lyases. Catalytic activity and specificity are two pivotal benchmarks for evaluating enzymatic performance. Despite substantial progress being made in quantifying and optimizing the catalytic activity of nanozymes, there is still a lack of in-depth research on the catalytic specificity of nanozymes, preventing the formation of consensual knowledge and impeding a more refined and systematic classification of nanozymes. Recently, debates have emerged regarding whether nanozymes could possess catalytic specificity similar to that of enzymes. This Perspective discusses the specificity of nanozymes by referring to the catalytic specificity of enzymes, highlights the specificity gap between nanozymes and enzymes, and concludes by offering our perspective on future research on the specificity of nanozymes.

From Biomimicking to Bioinspired Design of Electrocatalysts for CO2 Reduction to C1 Products

The electrochemical reduction of CO2 (CO2 RR) is a promising approach to maintain a carbon cycle balance and produce value-added chemicals. However, CO2 RR technology is far from mature, since the conventional CO2 RR electrocatalysts suffer from low activity (leading to currents <10 mA cm-2 in an H-cell), stability (<120 h), and selectivity. Hence, they cannot meet the requirements for commercial applications (>200 mA cm-2 , >8000 h, >90 % selectivity). Significant improvements are possible by taking inspiration from nature, considering biological organisms that efficiently catalyze the CO2 to various products. In this minireview, we present recent examples of enzyme-inspired and enzyme-mimicking CO2 RR electrocatalysts enabling the production of C1 products with high faradaic efficiency (FE). At present, these designs do not typically follow a methodical approach, but rather focus on isolated features of biological systems. To achieve disruptive change, we advocate a systematic design methodology that leverages fundamental mechanisms associated with desired properties in nature and adapts them to the context of engineering applications.

Development of nanozyme based sensors as diagnostic tools in clinic applications: a review

Since 1970, many artificial enzymes that imitate the activity and structure of natural enzymes have been discovered. Nanozymes are a group of nanomaterials with enzyme-mimetic properties capable of catalyzing natural enzyme processes. Nanozymes have attracted great interest in biomedicine due to their excellent stability, rapid reactivity, and affordable cost. The enzyme-mimetic activities of nanozymes may be modulated by numerous parameters, including the oxidative state of metal ions, pH, hydrogen peroxide (H2O2) level, and glutathione (GSH) concentration, indicating the tremendous potential for biological applications. This article delivers a comprehensive overview of the advances in the knowledge of nanozymes and the creation of unique and multifunctional nanozymes, and their biological applications. In addition, a future perspective of employing the as-designed nanozymes in biomedical and diagnostic applications is provided, and we also discuss the barriers and constraints for their further therapeutic use.

Dual Nanozyme-Driven PtSn Bimetallic Nanoclusters for Metal-Enhanced Tumor Photothermal and Catalytic Therapy

Specific generation of reactive oxygen species (ROS) within tumors in situ catalyzed by nanozymes is a promising strategy for cancer therapeutics. However, it remains a significant challenge to fabricate highly efficient nanozymes acting in the tumor microenvironment. Herein, we develop a bimetallic nanozyme (Pt₅₀Sn₅₀) with the photothermal enhancement of dual enzymatic activities for tumor catalytic therapy. The structures and activities of PtSn bimetallic nanoclusters (BNCs) with different Sn content are explored and evaluated systematically. Experimental comparisons show that the Pt₅₀Sn₅₀ BNCs exhibit the highest activities among all those investigated, including enzymatic activity and photothermal property, due to the generation of SnO_2-x with oxygen vacancy (O_vac) sites on the surface of Pt₅₀Sn₅₀ BNCs. Specifically, the Pt₅₀Sn₅₀ BNCs exhibit photothermal-enhanced peroxidase-like and catalase-like activities, as well as a significantly enhanced anticancer efficacy in both multicellular tumor spheroids and in vivo experiments. Due to the high X-ray attenuation coefficient and excellent light absorption property, the Pt₅₀Sn₅₀ BNCs also show dual-mode imaging capacity of computed tomography and photoacoustic imaging, which could achieve in vivo real-time monitoring of the therapeutic process. Therefore, this work will advance the development of noble-metal nanozymes with optimal composition for efficient tumor catalytic therapy.

Platinum-Nickel Nanoparticles with Enhanced Oxidase-like Activity for Total Antioxidant Capacity Bioassay

While great progress in nanozyme-enabled analytical chemistry has been made, most current nanozyme-based biosensing platforms are based on peroxidase-like nanozymes. However, peroxidase-like nanozymes with multienzymatic activities can influence the detection sensitivity and accuracy, while the use of unstable hydrogen peroxide (H₂O₂) in a peroxidase-like catalytic reaction may result in the reproducibility challenge of sensing signals. We envision that constructing biosensing systems by using oxidase-like nanozymes can address these limitations. Herein, we reported that platinum-nickel nanoparticles (Pt-Ni NPs) with Pt-rich shells and Ni-rich cores possessed high oxidase-like catalytic efficiency, exhibiting a 2.18-fold higher maximal reaction velocity (v_max) than initial pure Pt NPs. The oxidase-like Pt-Ni NPs were applied to develop a colorimetric assay for the determination of total antioxidant capacity (TAC). The antioxidant levels of four bioactive small molecules, two antioxidant nanomaterials, and three cells were successfully measured. Our work not only provides new insights for preparing highly active oxidase-like nanozymes but also manifests their applications for TAC analysis.

Recent Advances of Core-Shell Cu-Based Catalysts for the Reduction of CO2 to C2+ Products

Copper is a key metal for carbon dioxide (CO₂ ) reduction reaction, which can reduce CO₂ to value-added products. The core-shell structure can effectively promote the C-C coupling process due to its strong synergistic effect originated from its unique electronic structure and interface environment. Therefore, the combination of copper and core-shell structure to design an efficient Cu-based core-shell structure catalyst is of great significance for electrocatalytic CO₂ reduction (CO₂ RR). In this review, we first briefly summarize the basic principle of CO₂ RR. In addition, we outline the advantages of core-shell structure for catalysis. Then, we review the recent research progresses of Cu-based core-shell structures for the selective reduction of multi-carbon (C₂₊ ) products. In the end, the challenges of using core-shell catalyst for CO₂ RR are described, and the future development of this field is prospected.

Molecular insights of nanozymes from design to catalytic mechanism

Emerging as cost-effective potential alternatives to natural enzymes, nanozymes have attracted increasing interest in broad fields. To exploit the in-depth potential of nanozymes, rational structural engineering and explicit catalytic mechanisms at the molecular scale are required. Recently, impressive progress has been made in mimicking the characteristics of natural enzymes by constructing metal active sites, binding pockets, scaffolds, and delicate allosteric regulation. Ingenious in-depth studies have been conducted with advances in structural characterization and theoretical calculations, unveiling the "black box" of nanozyme-catalytic mechanisms. This review introduces the state-of-art synthesis strategies by learning from the natural enzyme counterparts and summarizes the general overview of the nanozyme mechanism with a particular emphasis on the adsorbed intermediates and descriptors that predict the nanozyme activity The emerging activity assessment methodology that illustrates the relationship between electrochemical oxygen reduction and enzymatic oxygen reduction is discussed with up-to-date advances Future opportunities and challenges are presented in the end to spark more profound work and attract more researchers from various backgrounds to the flourishing field of nanozymes.

Nanoconfinement Allows a Less Active Cascade Catalyst to Produce More C2+ Products in Electrochemical CO2 Reduction

Enzymes with multiple distinct active sites linked by substrate channels combined with control over the solution environment near the active sites enable the formation of complex products from simple reactants via the confinement of intermediates. We mimic this concept to facilitate the electrochemical carbon dioxide reduction reaction using nanoparticles with a core that produces intermediate CO at different rates and a porous copper shell. CO₂ reacts at the core to produce CO which then diffuses through the Cu to give higher order hydrocarbon molecules. By altering the rate of CO₂ delivery, the activity of the CO producing site, and the applied potential, we show that the nanoparticle with lower activity for CO formation produces greater amounts of hydrocarbon products. This is attributed to a combination of higher local pH and the lower amount of CO, resulting in more stable nanoparticles. However, when lower amounts of CO₂ were delivered to the core, the particles that are more active for CO formation produce more C₃ products. The importance of these results is twofold. They show that in cascade reactions, more active intermediate producing catalysts do not necessarily give greater amounts of high-value products. The effect an intermediate producing active site has on the local solution environment around the secondary active site plays an important role. As the less active catalyst for producing CO also possesses greater stability, we show that nanoconfinement can be used to get the best of both worlds with regard to having a stable catalyst with high activity.

The Influence of Nanoconfinement on Electrocatalysis

The use of nanoparticles and nanostructured electrodes are abundant in electrocatalysis. These nanometric systems contain elements of nanoconfinement in different degrees, depending on the geometry, which can have a much greater effect on the activity and selectivity than often considered. In this Review, we firstly identify the systems containing different degrees of nanoconfinement and how they can affect the activity and selectivity of electrocatalytic reactions. Then we follow with a fundamental understanding of how electrochemistry and electrocatalysis are affected by nanoconfinement, which is beginning to be uncovered, thanks to the development of new, atomically precise manufacturing and fabrication techniques as well as advances in theoretical modeling. The aim of this Review is to help us look beyond using nanostructuring as just a way to increase surface area, but also as a way to break the scaling relations imposed on electrocatalysis by thermodynamics.

Electrodes and electrocatalysts for electrochemical hydrogen peroxide sensors: a review of design strategies

H₂O₂ sensing is required in various biological and industrial applications, for which electrochemical sensing is a promising choice among various sensing technologies. Electrodes and electrocatalysts strongly influence the performance of electrochemical H₂O₂ sensors. Significant efforts have been devoted to electrode nanostructural designs and nanomaterial-based electrocatalysts. Here, we review the design strategies for electrodes and electrocatalysts used in electrochemical H₂O₂ sensors. We first summarize electrodes in different structures, including rotation disc electrodes, freestanding electrodes, all-in-one electrodes, and representative commercial H₂O₂ probes. Next, we discuss the design strategies used in recent studies to increase the number of active sites and intrinsic activities of electrocatalysts for H₂O₂ redox reactions, including nanoscale pore structuring, conductive supports, reducing the catalyst size, alloying, doping, and tuning the crystal facets. Finally, we provide our perspectives on the future research directions in creating nanoscale structures and nanomaterials to enable advanced electrochemical H₂O₂ sensors in practical applications.

Spiers Memorial Lecture. Next generation nanoelectrochemistry: the fundamental advances needed for applications

Nanoelectrochemistry, where electrochemical processes are controlled and investigated with nanoscale resolution, is gaining more and more attention because of the many potential applications in energy and sensing and the fact that there is much to learn about fundamental electrochemical processes when we explore them at the nanoscale. The development of instrumental methods that can explore the heterogeneity of electrochemistry occurring across an electrode surface, monitoring single molecules or many single nanoparticles on a surface simultaneously, have been pivotal in giving us new insights into nanoscale electrochemistry. Equally important has been the ability to synthesise or fabricate nanoscale entities with a high degree of control that allows us to develop nanoscale devices. Central to the latter has been the incredible advances in nanomaterial synthesis where electrode materials with atomic control over electrochemically active sites can be achieved. After introducing nanoelectrochemistry, this paper focuses on recent developments in two major application areas of nanoelectrochemistry; electrocatalysis and using single entities in sensing. Discussion of the developments in these two application fields highlights some of the advances in the fundamental understanding of nanoelectrochemical systems really driving these applications forward. Looking into our nanocrystal ball, this paper then highlights: the need to understand the impact of nanoconfinement on electrochemical processes, the need to measure many single entities, the need to develop more sophisticated ways of treating the potentially large data sets from measuring such many single entities, the need for more new methods for characterising nanoelectrochemical systems as they operate and the need for material synthesis to become more reproducible as well as possess more nanoscale control.

Electrochemical synthesis of core-shell nanoparticles by seed-mediated selective deposition

Conventional solvothermal synthesis of core-shell nanoparticles results in them being covered with surfactant molecules for size control and stabilization, undermining their practicality as electrocatalysts. Here, we report an electrochemical method for the synthesis of core-shell nanoparticles directly on electrodes, free of surfactants. By implementation of selective electrodeposition on gold cores, 1st-row transition metal shells were constructed with facile and precise thickness control. This type of metal-on-metal core-shell synthesis by purely electrochemical means is the first of its kind. The applicability of the nanoparticle decorated electrodes was demonstrated by alkaline oxygen evolution catalysis, during which the Au-Ni example displayed stable catalysis with low overpotential.

Single-Entity Electrocatalysis of Individual "Picked-and-Dropped" Co3 O4 Nanoparticles on the Tip of a Carbon Nanoelectrode

Nano-electrochemical tools to assess individual catalyst entities are critical to comprehend single-entity measurements. The intrinsic electrocatalytic activity of an individual well-defined Co3 O4 nanoparticle supported on a carbon-based nanoelectrode is determined by employing an efficient SEM-controlled robotic technique for picking and placing a single catalyst particle onto a modified carbon nanoelectrode surface. The stable nanoassembly is microscopically investigated and subsequently electrochemically characterized. The hexagonal-shaped Co3 O4 nanoparticles demonstrate size-dependent electrochemical activity and exhibit very high catalytic activity with a current density of up to 11.5 A cm-2 at 1.92 V (vs. RHE), and a turnover frequency of 532±100 s-1 at 1.92 V (vs. RHE) towards catalyzing the oxygen evolution reaction.

Nanozyme's catching up: activity, specificity, reaction conditions and reaction types

Nanozymes aim to mimic enzyme activities. In addition to catalytic activity, nanozymes also need to have specificity and catalyze biologically relevant reactions under physiological conditions to fit in the definition of enzyme and to set nanozymes apart from typical inorganic catalysts. Previous discussions in the nanozyme field mainly focused on the types of reactions or certain analytical, biomedical or environmental applications. In this article, we discuss efforts made to mimic enzymes. First, the catalytic cycles are compared, where a key difference is specific substrate binding by enzymes versus non-specific substrate adsorption by nanozymes. We then reviewed efforts to engineer and surface-modify nanomaterials to accelerate reaction rates, strategies to graft affinity ligands and molecularly imprinted polymers to achieve specific catalysis, and methods to bring nanozyme reactions to neutral pH and ambient temperature. Most of the current nanozyme reactions used a few model chromogenic substrates of no biological relevance. Therefore, we also reviewed efforts to catalyze the conversion of biomolecules and biopolymers using nanozymes. By the efforts to close the gaps between nanozymes and enzymes, we believe nanozymes are catching up rapidly. Still, challenges exist in materials design to further improve nanozymes as true enzyme mimics and achieve impactful applications.

Nanozymes for Environmental Pollutant Monitoring and Remediation

Nanozymes are advanced nanomaterials which mimic natural enzymes by exhibiting enzyme-like properties. As nanozymes offer better structural stability over their respective natural enzymes, they are ideal candidates for real-time and/or remote environmental pollutant monitoring and remediation. In this review, we classify nanozymes into four types depending on their enzyme-mimicking behaviour (active metal centre mimic, functional mimic, nanocomposite or 3D structural mimic) and offer mechanistic insights into the nature of their catalytic activity. Following this, we discuss the current environmental translation of nanozymes into a powerful sensing or remediation tool through inventive nano-architectural design of nanozymes and their transduction methodologies. Here, we focus on recent developments in nanozymes for the detection of heavy metal ions, pesticides and other organic pollutants, emphasising optical methods and a few electrochemical techniques. Strategies to remediate persistent organic pollutants such as pesticides, phenols, antibiotics and textile dyes are included. We conclude with a discussion on the practical deployment of these nanozymes in terms of their effectiveness, reusability, real-time in-field application, commercial production and regulatory considerations.

Engineering Fe-N Doped Graphene to Mimic Biological Functions of NADPH Oxidase in Cells

NADPH oxidase (NOX) as a transmembrane enzyme complex controls the generation of superoxide that plays important roles in immune signaling pathway. NOX inactivation may elicit immunodeficiency and cause chronic granulomatous disease (CGD). Biocompatible synthetic materials with NOX-like activities would therefore be interesting as curative and/or preventive approaches in case of NOX deficiency. Herein, we synthesized a Fe-N doped graphene (FeNGR) nanomaterial that could mimic the activity of NOX by efficiently catalyzing the conversion of NADPH into NADP+ and triggering the generation of oxygen radicals. The resulting FeNGR nanozyme had similar cellular distribution to NOX and is able to mimic the enzyme function in NOX-deficient cells by catalyzing the generation of superoxide and retrieving the immune activity, evidenced by TNF-α, IL-1β, and IL-6 production in response to Alum exposure. Overall, our study discovered a synthetic material (FeNGR) to mimic NOX and demonstrated its biological function in immune activation of NOX-deficient cells.

Electrocatalysis as the Nexus for Sustainable Renewable Energy: The Gordian Knot of Activity, Stability, and Selectivity

The use of renewable energy by means of electrochemical techniques by converting H2 O, CO2 and N2 into chemical energy sources and raw materials, is the basis for securing a future sustainable "green" energy supply. Some weaknesses and inconsistencies in the practice of determining the electrocatalytic performance, which prevents a rational bottom-up catalyst design, are discussed. Large discrepancies in material properties as well as in electrocatalytic activity and stability become obvious when materials are tested under the conditions of their intended use as opposed to the usual laboratory conditions. They advocate for uniform activity/stability correlations under application-relevant conditions, and the need for a clear representation of electrocatalytic performance by contextualization in terms of functional investigation or progress towards application is emphasized.

Mimicking Hydrazine Dehydrogenase for Efficient Electrocatalytic Oxidation of N2H4 by Fe-NC

Pursuing nonprecious doped carbon with Pt-like electrocatalytic N₂H₄ oxidation activity for hydrazine fuel cells (HzFCs) remains a challenge. Herein, we present a Fe/N-doped carbon (Fe-NC) catalyst with mesopore-rich channel and highly dispersed Fe-N sites incorporated in N-doped carbon, as an analogue of hydrazine dehydrogenase (HDH), showing the structure-dependent activity for electrocatalytic oxidation of N₂H₄. The maximal turnover frequency of the N₂H₄ oxidation reaction (HzOR) over the Fe-N sites (62870 h^-1) is 149-fold that over the pyridinic-N sites of N-doped carbon. The Fe mass activity of HzOR and maximal power density of HzFCs driven by Fe-NC approximately surpass those of Pt/C by 2.3 and 2.2 times, respectively. Theoretical calculation reveals that the Fe-N sites improve the dehydrogenation process of HzOR-related intermediates. One of the roles of the mesoporous structure in Fe-NC resembles that of a substrate channel in HDH for enhancing the transport of N₂H₄ besides exposing Fe-N sites and improving storage capacity of HzOR-related species.

Synthesis, Catalytic Properties and Application in Biosensorics of Nanozymes and Electronanocatalysts: A Review

The current review is devoted to nanozymes, i.e., nanostructured artificial enzymes which mimic the catalytic properties of natural enzymes. Use of the term "nanozyme" in the literature as indicating an enzyme is not always justified. For example, it is used inappropriately for nanomaterials bound with electrodes that possess catalytic activity only when applying an electric potential. If the enzyme-like activity of such a material is not proven in solution (without applying the potential), such a catalyst should be named an "electronanocatalyst", not a nanozyme. This paper presents a review of the classification of the nanozymes, their advantages vs. natural enzymes, and potential practical applications. Special attention is paid to nanozyme synthesis methods (hydrothermal and solvothermal, chemical reduction, sol-gel method, co-precipitation, polymerization/polycondensation, electrochemical deposition). The catalytic performance of nanozymes is characterized, a critical point of view on catalytic parameters of nanozymes described in scientific papers is presented and typical mistakes are analyzed. The central part of the review relates to characterization of nanozymes which mimic natural enzymes with analytical importance ("nanoperoxidase", "nanooxidases", "nanolaccase") and their use in the construction of electro-chemical (bio)sensors ("nanosensors").

Atomic engineering of single-atom nanozymes for enzyme-like catalysis

Enzyme mimics, especially nanozymes, play a crucial role in replacing natural enzymes for diverse applications related to bioanalysis, therapeutics and other enzyme-like catalysis. Nanozymes are catalytic nanomaterials with enzyme-like properties, which currently face formidable challenges with respect to their intricate structure, properties and mechanism in comparison with enzymes. The latest emergence of single-atom nanozymes (SAzymes) undoubtedly promoted the nanozyme technologies to the atomic level and provided new opportunities to break through their inherent limitations. In this perspective, we discuss key aspects of SAzymes, including the advantages of the single-site structure, and the derived synergetic enhancements of enzyme-like activity, catalytic selectivity and the mechanism, as well as the superiority in biological and catalytic applications, and then highlight challenges that SAzymes face and provide relevant guidelines from our point of view for the rational design and extensive applications of SAzymes, so that SAzyme may achieve its full potential as the next-generation nanozyme.

Electrochemical Sensor Based on Prussian Blue Electrochemically Deposited at ZrO2 Doped Carbon Nanotubes Glassy Carbon Modified Electrode

In this work, a new hydrogen peroxide (H₂O₂) electrochemical sensor was fabricated. Prussian blue (PB) was electrodeposited on a glassy carbon (GC) electrode modified with zirconia doped functionalized carbon nanotubes (ZrO₂-fCNTs), (PB/ZrO₂-fCNTs/GC). The morphology and structure of the nanostructured system were characterized by scanning and transmission electron microscopy (TEM), atomic force microscopy (AFM), specific surface area, X-ray diffraction (XRD), thermogravimetric analysis (TGA), Raman and Fourier transform infrared (FTIR) spectroscopy. The electrochemical properties were studied by cyclic voltammetry (CV) and chronoamperometry (CA). Zirconia nanocrystallites (6.6 ± 1.8 nm) with cubic crystal structure were directly synthesized on the fCNTs walls, obtaining a well dispersed distribution with a high surface area. The experimental results indicate that the ZrO₂-fCNTs nanostructured system exhibits good electrochemical properties and could be tunable by enhancing the modification conditions and method of synthesis. The fabricated sensor could be used to efficiently detect H₂O₂, presenting a good linear relationship between the H₂O₂ concentration and the peak current, with quantification limit (LQ) of the 10.91 μmol·L^-1 and detection limit (LD) of 3.5913 μmol·L^-1.

Iron-Based Nanozymes in Disease Diagnosis and Treatment

Iron-based nanozymes are currently one of the few clinical inorganic nanoparticles for disease diagnosis and treatment. Overcoming the shortcomings of natural enzymes, such as easy inactivation and low yield, combined with their special nanometer properties and magnetic functions, iron-based nanozymes have broad prospects in biomedicine. This minireview summarizes their preparation, biological activity, catalytic mechanism, and applications in diagnosis and treatment of diseases. Finally, challenges to their future development and the trends of iron-based nanozymes are discussed. The purpose of this minireview is to better understand and reasonably speculate on the rational design of iron-based nanozymes as an increasingly important new paradigm for diagnostics.

Antibiotic-Free Antibacterial Strategies Enabled by Nanomaterials: Progress and Perspectives

Bacterial infection is one of the top ten leading causes of death globally and the worst killer in low-income countries. The overuse of antibiotics leads to ever-increasing antibiotic resistance, posing a severe threat to human health. Recent advances in nanotechnology provide new opportunities to address the challenges in bacterial infection by killing germs without using antibiotics. Antibiotic-free antibacterial strategies enabled by advanced nanomaterials are presented. Nanomaterials are classified on the basis of their mode of action: nanomaterials with intrinsic or light-mediated bactericidal properties and others that serve as vehicles for the delivery of natural antibacterial compounds. Specific attention is given to antibacterial mechanisms and the structure-performance relationship. Practical antibacterial applications employing these antibiotic-free strategies are also introduced. Current challenges in this field and future perspectives are presented to stimulate new technologies and their translation to fight against bacterial infection.

Preserving the Exposed Facets of Pt3Sn Intermetallic Nanocubes During an Order to Disorder Transition Allows the Elucidation of the Effect of the Degree of Alloy Ordering on Electrocatalysis

Controlling which facets are exposed in nanocrystals is crucial to understanding different activity between ordered and disordered alloy electrocatalysts. We modify the degree of ordering of Pt₃Sn nanocubes, while maintaining the shape and size, to enable a direct evaluation of the effect of the order on ORR catalytic activity. We demonstrate a 2.3-fold enhancement in specific activity by 60- and 30%-ordered Pt₃Sn nanocubes compared to 95%-ordered. This was shown to be likely due to surface vacancies in the less-ordered particles. The greater order, however, results in higher stability of the electrocatalyst, with the more disordered nanoparticles showing the dissolution of tin and platinum species during electrocatalysis.

The importance of nanoscale confinement to electrocatalytic performance

Electrocatalytic nanoparticles that mimic the three-dimensional geometric architecture of enzymes where the reaction occurs down a substrate channel isolated from bulk solution, referred to herein as nanozymes, were used to explore the impact of nano-confinement on electrocatalytic reactions. Surfactant covered Pt-Ni nanozyme nanoparticles, with Ni etched from the nanoparticles, possess a nanoscale channel in which the active sites for electrocatalysis of oxygen reduction are located. Different particle compositions and etching parameters allowed synthesis of nanoparticles with different average substrate channel diameters that have varying amounts of nano-confinement. The results showed that in the kinetically limited regime at low overpotentials, the smaller the substrate channels the higher the specific activity of the electrocatalyst. This is attributed to higher concentrations of protons, relative to bulk solution, required to balance the potential inside the nano-confined channel. However, at higher overpotentials where limitation by mass transport of oxygen becomes important, the nanozymes with larger substrate channels showed higher electrocatalytic activity. A reaction-diffusion model revealed that the higher electrocatalytic activity at low overpotentials with smaller substrate channels can be explained by the higher concentration of protons. The model suggests that the dominant mode of mass transport to achieve these high concentrations is by migration, exemplifying how nano-confinement can be used to enhance reaction rates. Experimental and theoretical data show that under mass transport limiting potentials, the nano-confinement has no effect and the reaction only occurs at the entrance of the substrate channel at the nanoparticle surface.

Synthesis of low- and high-index faceted metal (Pt, Pd, Ru, Ir, Rh) nanoparticles for improved activity and stability in electrocatalysis

Driven by the quest for future energy solution, faceted metal nanoparticles are being pursued as the next generation electrocatalysts for renewable energy applications. Thanks to recent advancement in solution phase synthesis, different low- and high-index facets on metal nanocrystals become accessible and are tested for specific electrocatalytic reactions. This minireview summarises the key approaches to prepare nanocrystals containing the most catalytically active platinum group metals (Pt, Pd, Ru, Ir and Rh) exposed with low- and high-index facets using solution phase synthesis. Electrocatalytic studies related to the different facets are highlighted to emphasise the importance of exposing facets for catalysing these reactions, namely oxygen reduction reaction (ORR), hydrogen oxidation reaction (HOR), alcohol oxidation including methanol (MOR) and ethanol oxidation reactions (EOR), formic acid oxidation reaction (FAOR), oxygen evolution reaction (OER), and hydrogen evolution reaction (HER). The future outlook discusses the challenges and opportunities for making electrocatalysts that are even more active and stable.

Direct Growth of Highly Strained Pt Islands on Branched Ni Nanoparticles for Improved Hydrogen Evolution Reaction Activity

The direct growth of Pt islands on lattice mismatched Ni nanoparticles is a major synthetic challenge and a promising strategy to create highly strained Pt atoms for electrocatalysis. By using very mild reaction conditions, Pt islands with tunable strain were formed directly on Ni branched particles. The highly strained 1.9 nm Pt-island on branched Ni nanoparticles exhibited high specific activity and the highest mass activity for hydrogen evolution (HER) in a pH 13 electrolyte. These results show the ability to synthetically tune the size of the Pt islands to control the strain to give higher HER activity.

Cascade Reactions in Nanozymes: Spatially Separated Active Sites inside Ag-Core-Porous-Cu-Shell Nanoparticles for Multistep Carbon Dioxide Reduction to Higher Organic Molecules

Enzymes can perform complex multistep cascade reactions by linking multiple distinct catalytic sites via substrate channeling. We mimic this feature in a generalized approach with an electrocatalytic nanoparticle for the carbon dioxide reduction reaction comprising a Ag core surrounded by a porous Cu shell, providing different active sites in nanoconfined volumes. The architecture of the nanozyme provides the basis for a cascade reaction, which promotes C-C coupling reactions. The first step occurs on the Ag core, and the subsequent steps on the porous copper shell, where a sufficiently high CO concentration due to the nanoconfinement facilitates C-C bond formation. The architecture yields the formation of n-propanol and propionaldehyde at potentials as low as -0.6 V vs RHE.

Nanozymes: Classification, Catalytic Mechanisms, Activity Regulation, and Applications

Because of the high catalytic activities and substrate specificity, natural enzymes have been widely used in industrial, medical, and biological fields, etc. Although promising, they often suffer from intrinsic shortcomings such as high cost, low operational stability, and difficulties of recycling. To overcome these shortcomings, researchers have been devoted to the exploration of artificial enzyme mimics for a long time. Since the discovery of ferromagnetic nanoparticles with intrinsic horseradish peroxidase-like activity in 2007, a large amount of studies on nanozymes have been constantly emerging in the next decade. Nanozymes are one kind of nanomaterials with enzymatic catalytic properties. Compared with natural enzymes, nanozymes have the advantages such as low cost, high stability and durability, which have been widely used in industrial, medical, and biological fields. A thorough understanding of the possible catalytic mechanisms will contribute to the development of novel and high-efficient nanozymes, and the rational regulations of the activities of nanozymes are of great significance. In this review, we systematically introduce the classification, catalytic mechanism, activity regulation as well as recent research progress of nanozymes in the field of biosensing, environmental protection, and disease treatments, etc. in the past years. We also propose the current challenges of nanozymes as well as their future research focus. We anticipate this review may be of significance for the field to understand the properties of nanozymes and the development of novel nanomaterials with enzyme mimicking activities.

Nanoarchitectured peroxidase-mimetic nanozymes: mesoporous nanocrystalline α- or γ-iron oxide?

Next-generation nanozyme based biosensing: mesoporous nanocrystalline α- or γ-iron oxide?