Fluorination Effects on Indacenodithienothiophene Acceptor Packing and Electronic Structure, End-Group Redistribution, and Solar Cell Photovoltaic Response

Impact of Terminal Halogen and CN Substitutions on Photoelectric Properties of Asymmetric Y6-Based NFA with Terminal Groups in Different Orientations: A DFT/TDDFT Study

Nonfullerene acceptors (NFAs) with an acceptor-donor-acceptor-donor-acceptor (A-DA'D-A) molecular framework have attracted much attention due to their excellent performance. However, the modifications of terminal units of asymmetric Y6-based NFA with terminal groups of different orientations are still few, and its effects on photoelectrical properties are still not clear. In this work, based on asymmetric IPC-BEH-IC2F (showing better performance than Y6 in experiment) with terminal groups in different orientations, we systematically designed six new NFAs via halogen and CN substitutions on terminal groups. The molecular planarity, dipole moments, electrostatic potential maps and their fluctuations, frontier molecular orbitals, exciton binding energy, UV-vis spectra, and energy difference between the first singlet and triplet states of these NFAs are predicted using reliable density functional theory (DFT) and time-dependent DFT (T-DFT) calculations. The results show that with respect to prototype CN-F, Br-F, CN-Br, and CN-Cl exhibit comparable energy levels of the lowest unoccupied molecular orbital (LUMO), reduced energy gap (by at least 0.026 eV), Eb (by at least 0.002 eV), and ΔEST (by at least 0.009 eV) values, red shifts (by at least 2 nm) in the wavelengths of the main absorption peaks, and enhanced absorption (by at least 0.05 in total oscillator strength) in the visible to near-infrared regions, indicating their potential as outstanding asymmetric NFAs. This study offers valuable insights into the future design and optimization of NFAs featuring asymmetric terminal groups.

Radical-activable charge-transfer cocrystals for solar thermoelectric generator toward information conversion

Solar thermoelectric generators (STEGs) that can effectively harvest solar energy and convert it into affordable electricity, provide a promising solution for self-powered wearable electronics and the Internet of Things (IoT). However, their electricity generation is often limited by the low thermal concentration or unstable temperature gradients in practical applications. Herein, we rationally designed an organic radical-activable charge-transfer (CT) cocrystal based on the open-shell radical electron acceptor of 2,6-dibromonaphthalene-1,4,5,8-tetracarboxylic dianhydride. The open-shell radical contributes to the strong near-infrared absorption and nonradiative recombination, resulting in a high photothermal conversion efficiency of 67.2% for the prepared CT cocrystal. Furthermore, the photothermal ink containing the radical-activable CT cocrystal and the transparent resin was successfully coated onto a thermoelectric generator as a cost-effective light absorber, facilely forming a high-performance STEG. Notably, the prepared STEG output a voltage of 143 mV under 1 sun irradiation, demonstrating real-time photodetection capability. We anticipate the potential applications of these cocrystals in self-powered optoelectronics, such as a non-contact and long-distance information converters.

Exploration of selenophene analogue and different acceptor influence on photovoltaic properties of pyrrole-4,6(5-H)-dione based chromophores via quantum chemical investigations

Non-fullerene organic compounds are considered efficient photovoltaic materials in the development of solar cells. Therefore, considering the importance of non-fullerene organic compounds, a series of non-fullerene organic chromophores (SPF1-SPF6) was designed via molecular engineering at terminal acceptors of reference compound (SPFR). Further, owing to the interesting features of selenium than sulphur towards charge transfer, thiophene was replaced with selenophene in designed derivatives and analyzed using quantum chemical approach. Through benchmark study, CAM-B3LYP/6-311G(d, p) functional was selected for the current study. Several parameters, such as frontier molecular orbitals, density of states, binding energy, transition density matrix, optical properties, reorganization energies of electron and hole, open circuit voltage, and charge transfer analyses were assessed to comprehend the photovoltaic properties of designed compounds. A energy gap: 4.433-4.764 eV with absorption spectra as 465.1-512.7 nm in chloroform and 445.4-494.0 nm in the gas phase and greater charge transference rate was studied in selenophene derivatives. The lower Eb and the behavior of holes and electrons implied a higher rate of exciton separation and considerable transfer of charges towards LUMO from the HOMO. The results of DOS and TDM analysis further corroborated these findings. Furthermore, the Voc, in relation to the HOMOPTB7-LUMOAcceptor, depicted that the proposed molecules have good Voc values. Furthermore, a comparative study with spiro-OMeTAD, a standard hole transport material (HTM) demonstrated a good correlation, indicating that the proposed compounds have the potential to function as efficient HTMs. Therefore, it can be deduced that the use of molecular engineering with various acceptor molecules has the potential to enhance the effectiveness of photovoltaic materials.

Significant Efficiency Enhancements in Non-Y Series Acceptors by the Addition of Outer Side Chains

Most current highly efficient organic solar cells utilize small molecules like Y6 and its derivatives as electron acceptors in the photoactive layer. In this work, a small molecule acceptor, SC8-IT4F, is developed through outer side chain engineering on the terminal thiophene of a conjugated 6,12-dihydro-dithienoindeno[2,3-d:2',3'-d']-s-indaceno[1,2-b:5,6-b']dithiophene (IDTT) central core. Compared to the reference molecule C8-IT4F, which lacks outer side chains, SC8-IT4F displays notable differences in molecule geometry (as shown by simulations), thermal behavior, single-crystal packing, and film morphology. Blend films of SC8-IT4F and the polymer donor PM6 exhibit larger carrier mobilities, longer carrier lifetimes, and reduced recombination compared to C8-IT4F, resulting in improved device performance. Binary photovoltaic devices based on the PM6:SC8-IT4F films reveal an optimal efficiency over 15%, which is one of the best values for non-Y type small molecule acceptors (SMAs). The resultant devices also show better thermal and operational stability than the control PM6:L8-BO devices. SC8-IT4F and its blend exhibit a higher relative degree of crystallinity and π coherence length, compared to C8-IT4F samples, beneficial for charge transport and device performance. The results indicate that outer side chain engineering on existing small electron acceptors can be a promising molecular design strategy for further pursuing high-performance organic solar cells.

Diketopyrrolopyrrole-Activated Dynamic Condensation Approach to Narrow-Band Gap Vinylene-Linked Covalent Organic Frameworks

Vinyl units intrinsically featuring less steric, nonpolarity, and unsaturated character, are well-known π-bridge used in the synthesis of high-performance semiconducting materials. Two-dimensional (2D) vinylene-linked covalent organic frameworks (COFs) represent a promising class of π-conjugated structures, however, the range of available monomers for the reversible formation of carbon-carbon double bonds remains limited. In this study, a new class of 2D vinylene-linked COFs were synthesized using dimethyldiketopyrrolopyrrole (DM-DPP) as the key monomer. The strong electron deficiency of diketopyrrolopyrrole (DPP) makes its methyl substituents readily activated upon the cocatalysis of L-proline and 4-dimethylaminopyridine in aqueous solution to conduct dynamic condensation with tritopic aromatic aldehydes. The resulting COFs crystallized in an eclipsed AA stacking arrangement and featured abundant, regular nanochannels. Their robust vinyl DPP-linking mode enhanced donor-π-acceptor conjugation and promoted π-stacked alignment along the vertical direction. Consequently, the synthesized COFs exhibited band gaps as narrow as 1.02 eV and demonstrated excellent light-harvesting capability across the visible to near-infrared I (NIR-I) regions. Furthermore, the COFs could be converted into free-standing thin pellets through simple pressure casting, and show excellent photothermal response and cycling stability under different light sources.

Revealing Intrinsic Free Charge Generation: Promoting the Construction of Over 19% Efficient Planar p-n Heterojunction Organic Solar Cells

Due to high binding energy and extremely short diffusion distance of Frenkel excitons in common organic semiconductors at early stage, mechanism of interface charge transfer-mediated free carrier generation has dominated the development of bulk heterojunction (BHJ) organic solar cells (OSCs). However, considering the advancements in materials and device performance, it is necessary to reexamine the photoelectric conversion in current-stage efficient OSCs. Here, we propose that the conjugated materials with specific three-dimensional donor-acceptor conjugated packing potentially exhibit distinctive charge photogeneration mechanism, which spontaneously split Wannier-Mott excitons to free carriers in pure phases. Subsequently, the pure planar p-n heterojunction (PHJ) OSCs based on green orthogonal solvents were prepared and exhibited comparable even greater performance to that of BHJ OSCs. More interestingly, by introducing PVDF-TrFE as intrinsic region to regulate built-in electric field of the device, the planar p-i-n PHJ OSCs achieved much higher efficiency (>18%) and stability. Moreover, a prominent efficiency of over 19% has been obtained via ternary optimization, which is the new efficiency record for PHJ OSCs up to date. This study points towards the distinguishing intrinsic free charge generation mechanism, opens up a new avenue for OSCs to collectively realize high-efficiency, long-term duration, and simplified device engineering for future commercialization.

Recent Advances in Polymorphism of Organic Solar Cells

As organic solar cells (OSCs) achieve notable advancements, a significant consensus has been highlighted that the device performance is intricately linked to the active layer morphology. With conjugated molecules being widely employed, intermolecular interactions exert substantial influence over the aggregation state and morphology formation, resulting in distinct molecular packing motifs, also known as polymorphism. This phenomenon is closely associated with processing conditions and exerts a profound impact on functional properties. Consequently, understanding the mechanisms underlying polymorphism formation and establishing a definitive correlation between polymorphism and photophysical behavior is crucial for driving high-performance OSCs. In this review, a comprehensive synthesis of recent developments is provided and emphasizing its pivotal role in the field of OSC polymorphism. The thermodynamic and kinetic principles governing polymorphism formation are examined. Then, representative polymorphisms are classified in OSC materials, segmenting them into homopolymers, copolymers, and IDTT- and BTP-based small molecules. Additionally, prevalent strategies are evaluated for manipulating polymorphism. This review culminates with an analysis of the critical effects of polymorphism on OSCs, including charge carrier characteristics, photovoltaic efficiency, and long-term stability. By offering novel perspectives and practical insights, this work seeks to guide future efforts in the morphological optimization of high-efficiency OSCs.

Rebuilding Peripheral F, Cl, Br Footprints on Acceptors Enables Binary Organic Photovoltaic Efficiency Exceeding 19.7

Given homomorphic fluorine (F), chlorine (Cl) and bromine (Br) atoms are featured with gradually enlarged polarizability/atomic radius but decreased electronegativity, the rational screen of halogen species and locations on small molecular acceptors (SMAs) is quite essential for acquiring desirable molecular packing to boost efficiency of organic solar cells (OSCs). Herein, three isomeric SMAs (CH-F, CH-C and CH-B) are constructed by delicately rebuilding peripheral F, Cl, Br footprints on both central and end units. Such a re-permutation of peripheral halogens could not only maintain the structural symmetry of SMAs to the maximum, but also acquire extra asymmetric benefits of enhanced dipole moment and intramolecular charge transfer, etc. Moreover, central brominating enhances molecular crystallinity of CH-B without introducing undesirable steric hindrance on end groups, thus rendering a better balance between high crystallization and domain size control in PM6:CH-B blend. Further benefitting from the large dielectric constant, small exciton binding energy, optimized molecular packing and great electron transfer integral, CH-B affords the first class binary OSC efficiency of 19.78 %, moreover, the highest efficiency of 18.35 % thus far when increasing active layer thickness to ~300 nm. Our successful screening in rebuilding peripheral halogen footprints provides the valuable insight into further rational design of SMAs for record-breaking OSCs.

Linker Group Fluorination Boosts Photovoltaic Performance of Branch-Connected Dimerized Acceptors

Branch-connected dimerized acceptors can take full advantages of four end units in enhancing molecular packing comparing to that of terminal-connected ones, thus potentially reaching the best balance between stability and power conversion efficiency (PCE) of organic solar cells (OSCs). Herein, two branch-connected dimerized acceptors, namely D1 and D2, are developed by employing bithiophene and difluorinated bithiophene as linker groups, respectively. Induced by the fluorine atoms on linker group, D2 affords a larger molar extinction coefficient, more importantly, the optimized nanoscale film morphology and superior charge transport behavior comparing to D1. Consequently, D2-based binary OSCs render a good PCE of 16.66%, outperforming that of 15.08% for D1-based ones. This work highlights the great significance of linker group screening in designing high-performance branch-connected dimerized acceptors.

Non-Fused π-Extension of Endcaps of Small Molecular Acceptors Enabling High-Performance Organic Solar Cells

The modular structure of small molecular acceptors (SMAs) allows for versatile modifications of the materials and boosts the photovoltaic efficiencies of organic solar cells (OSCs) in recent years. As a critical component, the endcaps of SMAs have been intensively investigated and modified to control the molecular aggregation and photo-electronic conversion. However, most of the studies focus on halogenation or π-fusion extension of the endcap moieties, but overlook the non-fused π-extension approach, which could be a promising strategy to balance the self-aggregation and compatibility behaviors. Herein, we reported two new acceptors namely BTP-Th and BTP-FTh based on non-fused π-extension of the endcap by chlorinated-thiophene, of which the latter molecule has better co-planarity and crystallinity because of the intramolecular noncovalent interactions. Paired with donor PBDB-T, the optimal device of BTP-FTh reveals a greater efficiency of 14.81 % that that of BTP-Th (13.91 %). Nevertheless, the BTP-Th based device realizes a lower energy loss, enabling BTP-Th as a good candidate to serve as guest acceptor. As a result, the ternary solar cells of PM6 : BTP-eC9 : BTP-Th output a champion efficiency up to 18.71 % with enhanced open-circuit voltage. This study highlights the significance of rational decoration of endcaps for the design of high-performance SMAs and photovoltaic cells.

Delicate Regulation of Central Substituents Boosts Organic Photovoltaic Performance of Dimeric Acceptors

Dimeric acceptors are expected to satisfy both excellent power conversion efficiency (PCE) and operational stability of organic solar cells (OSCs). However, comparing to highly planar and symmetrical monomer-like acceptors, the quite different steric/spatial configurations of dimeric acceptors affect device outcomes greatly. Herein, on basis of the same dimeric molecular platform that constructed by bridging central units of two monomer-like acceptor, diverse substituents (─OCH3 for D1, ─CH3 for D2, and ─CF3 for D3) are grafted on central units to regulate the three dimensions (3D) geometries of dimeric acceptors delicately. A systematic investigation reveals the substituent-dependent variation of energy level, absorption, and molecular packing behavior. Consequently, D2 acceptor, characteristic of more favorable configuration, affords a superior film morphology and charge transfer/transport dynamics in resulting OSCs, thus yielding an excellent PCE of 17.50% along with a good long-term stability. This work manifests the crucially important role of central substituents in constructing high-performance dimeric acceptors.

Nitrogen-Bridged Fused-Ring Nonacyclic and Heptacyclic A-D-A Acceptors for Organic Photovoltaics

In this work, we designed two nitrogen-bridged fluorene-based heptacyclic FNT and nonacyclic FNTT ladder-type structures, which were constructed by one-pot palladium-catalyzed Buchwald-Hartwig amination. FNT and FNTT were further end-capped by FIC acceptors to form two FNT-FIC and FNTT-FIC non-fullerene acceptors (NFAs), respectively. The two NFAs exhibit more red-shifted absorption and higher crystallinity compared to those of the corresponding carbon-bridged FCT-FIC and FCTT-FIC counterparts. Grazing incidence wide-angle X-ray scattering (GIWAXS) measurements reveal that the 2-butyloctyl groups on the nitrogen in the convex region of FNT-FIC interdigitate with the dioctyl groups on the fluorene in the concave region of another FNT-FIC, resulting in a lamellar packing structure with a d spacing of 13.27 Å. As a consequence, the PM6:FNT-FIC (1:1 wt %) device achieved a power conversion efficiency (PCE) of only 6.60%, primarily due to the highly crystalline nature of FNT-FIC, which induced significant phase separation between PM6 and FNT-FIC in the blended film. However, FNTT-FIC, featuring 2-butyloctyl groups positioned on the nitrogen within the concave region of its curved skeleton, exhibits improved donor-acceptor miscibility, thereby promoting a more favorable morphology. As a result, the PM6:FNTT-FIC (1:1.2 wt %) device exhibited a higher PCE of 12.15% with an exceptional Voc of 0.96 V. This research demonstrates that placing alkylamino moieties within the concave region of curved A-D-A NFAs leads to a better molecular design.

Exploring the photovoltaic properties of naphthalene-1,5-diamine-based functionalized materials in aprotic polar medium: a combined experimental and DFT approach

In this study, a series of naphthalene-1,5-diamine-based donor chromophores (ND1-ND9) with A-D-A architecture was synthesized through a condensation reaction between amines and substituted aldehydes. Various spectroscopic techniques i.e., FTIR, UV-Vis, 1HNMR and 13CNMR were performed for structural elucidation of naphthalene-1,5-diamine-based chromophores. Accompanying the synthesis, quantum chemical calculations were also accomplished at MPW1PW91/6-311G (d,p) functional of DFT/TD-DFT approaches to explore the photovoltaic properties of ND1-ND9 compounds. A comparative study between experimental and DFT results of vibrational and UV-Vis analyses showed a good harmony. All compounds showed band gaps in the range of 3.804-3.900 eV with absorption spectra in the UV region (397.169-408.822 nm). Frontier molecular orbital (FMO) findings revealed an efficient intramolecular charge transfer (ICT) from the central naphthalene-1,5-diamine-based donor core towards terminal acceptors. This significant charge transfer was also supported by the density of states (DOS) and transition density matrix (TDM) maps. All synthesized chromophores showed lower exciton binding energy values (E b = 0.670-0.785 eV), illustrating higher exciton dissociation rates with greater charge transfer in the studied chromophores. A reasonable harmony was obtained by comparative investigations of a standard hole transport material (HTM), Spiro-OMe TAD, with ND1-ND9 compounds, which illustrated that these synthesized chromophores might be considered as good HTMs. Therefore, all analyses indicated that the naphthalene-1,5-diamine-based chromophores might be utilized as efficient photovoltaic materials.

The Multi-Functional Third Acceptor Realizes the Synergistic Improvement in Photovoltaic Parameters and the High-Ratio Tolerance of Ternary Organic Photovoltaics

The ternary strategy proves effective for breakthroughs in organic photovoltaics (OPVs). Elevating three photovoltaic parameters synergistically, especially the proportion-insensitive third component, is crucial for efficient ternary devices. This work introduces a molecular design strategy by comprehensively analyzing asymmetric end groups, side-chain engineering, and halogenation to explore the outstanding optoelectronic properties of the proportion-insensitive third component in efficient ternary systems. Three asymmetric non-fullerene acceptors (BTP-SA1, BTP-SA2, and BTP-SA3) are synthesized based on the Y6 framework and incorporated as the third component into the D18:Y6 binary system. BTP-SA3, featuring asymmetric terminal (difluoro-indone and dichloride-cyanoindone terminal), with branched alkyl side chains, exhibited high open-circuit voltage (VOC), balanced crystallinity and compatibility, achieving synergistic enhancements in VOC (0.862 V), short circuit-current density (JSC, 27.52 mA cm-2), fill fact (FF, 81.01%), and power convert efficiency (PCE, 19.19%). Device based on D18/Y6:BTP-SA3 (layer-by-layer processed) reached a high efficiency of 19.36%, demonstrating a high tolerance for BTP-SA3 (10-50%). This work provides novel insights into optimizing OPVs performances in multi-component systems and designing components with enhanced tolerance.

Fully Fused Indacenodithiophene-Centered Small-Molecule n-Type Semiconductors for High-Performance Organic Electronics

Developing novel n-type organic semiconductors is an on-going research endeavour, given their pivotal roles in organic electronics and their relative scarcity compared to p-type counterparts. In this study, a new strategy was employed to synthesize n-type organic semiconductors featuring a fully fused conjugated backbone. By attaching two sets of adjacent amino and formyl groups to the indacenodithiophene-based central cores and triggering a tandem reaction sequence of a Knoevenagel condensation-intramolecular cyclization, DFA1 and DFA2 were realized. The solution-processed organic field effect transistors based on DFA1 exhibited unipolar n-type transport character with a decent electron mobility of ca. 0.10 cm2 V-1 s-1 (ca. 0.038 cm2 V-1 s-1 for DFA2 based devices). When employing DFA1 as a third component in organic solar cells, a high power conversion efficiency of 19.2 % can be achieved in ternary devices fabricated with PM6 : L8-BO : DFA1. This work provides a new pathway in the molecular engineering of n-type organic semiconductors, propelling relevant research forward.

Precisely Regulating Intermolecular Interactions and Molecular Packing of Nonfused-Ring Electron Acceptors via Halogen Transposition for High-Performance Organic Solar Cells

The structure of molecular aggregates is crucial for charge transport and photovoltaic performance in organic solar cells (OSCs). Herein, the intermolecular interactions and aggregated structures of nonfused-ring electron acceptors (NFREAs) are precisely regulated through a halogen transposition strategy, resulting in a noteworthy transformation from a 2D-layered structure to a 3D-interconnected packing network. Based on the 3D electron transport pathway, the binary and ternary devices deliver outstanding power conversion efficiencies (PCEs) of 17.46 % and 18.24 %, respectively, marking the highest value for NFREA-based OSCs.

Emerging A-D-A fused-ring photosensitizers for tumor phototheranostics

As we all know, cancer is still a disease that we are struggling against. Although the traditional treatment options are still the mainstream in clinical practice, emerging phototheranostics technologies based on photoacoustic or fluorescence imaging-guided phototherapy also provide a new exploration direction for non-invasive, low-risk and highly efficient cancer treatment. Photosensitizers are the core materials to accomplish this mission. Recently, more attention has been paid to the emerging A-D-A fused-ring photosensitizers. A-D-A fused-ring photosensitizers display strong and wide absorption spectra, high photostability and easy molecular modification. Since this type of photosensitizer was first used for tumor therapy in 2019, its application boundaries are constantly expanding. Therefore, in this feature article, from the perspective of molecular design, we focused on the development of these molecules for application in phototheranostics over the past five years. The effects of tiny structural changes on their photophysical properties are discussed in detail, which provides a way for structural optimization of the subsequent A-D-A photosensitizers.

Combined Charge Extraction by Linearly Increasing Voltage and Time-Resolved Microwave Conductivity to Reveal the Dynamic Charge Carrier Mobilities in Thin-Film Organic Solar Cells

This article reports a purely experiment-based method to evaluate the time-dependent charge carrier mobilities in thin-film organic solar cells (OSCs) using simultaneous charge extraction by linearly increasing the voltage (CELIV) and time-resolved microwave conductivity (TRMC) measurements. This method enables the separate measurement of electron mobility (μe) and hole mobility (μh) in a metal-insulator-semiconductor (MIS) device. A slope-injection-restoration voltage profile for MIS-CELIV is also proposed to accurately determine the charge densities. The dynamic behavior of μe and μh is examined in five bulk heterojunction (BHJ) OSCs of polymer:fullerene (P3HT:PCBM and PffBT4T:PCBM) and polymer:nonfullerene acceptor (PM6:ITIC, PM6:IT4F, and PM6:Y6). While the former exhibits fast decays of μh and μe, the latter, in particular, PM6:IT4F and PM6:Y6, exhibits slow decays. Notably, the high-performing PM6:Y6 demonstrates both a balanced mobility (μe/μh) of 1.0-1.1 within 30 μs and relatively large CELIV-TRMC mobility values among the five BHJs. The results exhibit reasonable consistency with a high fill factor. The proposed new CELIV-TRMC technique offers a path toward a comprehensive understanding of dynamic mobility and its correlation with the OSC performance.

Optimizing Molecular Crystallinity and Suppressing Electron-Phonon Coupling in Completely Non-Fused Ring Electron Acceptors for Organic Solar Cells

High open-circuit voltage (Voc) organic solar cells (OSCs) have received increasing attention because of their promising application in tandem devices and indoor photovoltaics. However, the lack of a precise correlation between molecular structure and stacking behaviors of wide band gap electron acceptors has greatly limited its development. Here, we adopted an asymmetric halogenation strategy (AHS) and synthesized two completely non-fused ring electron acceptors (NFREAs), HF-BTA33 and HCl-BTA33. The results show that AHS significantly enhances the molecular dipoles and suppresses electron-phonon coupling, resulting in enhanced intramolecular/intermolecular interactions and decreased nonradiative decay. As a result, PTQ10 : HF-BTA33 realizes a power conversion efficiency (PCE) of 11.42 % with a Voc of 1.232 V, higher than that of symmetric analogue F-BTA33 (PCE=10.02 %, Voc=1.197 V). Notably, PTQ10 : HCl-BTA33 achieves the highest PCE of 12.54 % with a Voc of 1.201 V due to the long-range ordered π-π packing and enhanced surface electrostatic interactions thereby facilitating exciton dissociation and charge transport. This work not only proves that asymmetric halogenation of completely NFREAs is a simple and effective strategy for achieving both high PCE and Voc, but also provides deeper insights for the precise molecular design of low cost completely NFREAs.

Pyrrole-Based Fully Non-fused Acceptor for Efficient and Stable Organic Solar Cells

Organic solar cells (OSCs) are still suffering from the low light utilization and unstable under ultraviolet irradiation. To tackle these challenges, we design and synthesize a non-fused acceptor based on 1-(2-butyloctyl)-1H-pyrrole as π-bridge unit, denoted as GS70, which serves as active layer in the front-cell for constructing tandem OSCs with a parallel configuration. Benefiting from the well-complementary absorption spectra with the rear-cell, GS70-based parallel tandem OSCs exhibit an improved photoelectron response over the range between 600-700 nm, yielding a high short-circuit current density of 28.4 mA cm-2. The improvement in light utilization translates to a power conversion efficiency of 19.4 %, the highest value among all parallel tandem OSCs. Notably, owing to the intrinsic stability of GS70, the manufactured parallel tandem OSCs retain 84.9 % of their initial PCE after continuous illumination for 1000 hours. Overall, this work offers novel insight into the molecular design of low-cost and stability non-fused acceptors, emphasizing the importance of adopting a parallel tandem configuration for achieving efficient light harvesting and improved photostability in OSCs.

An Ortho-Bisalkyloxylated Benzene-Based Fully Non-fused Electron Acceptor for Efficient Organic Photovoltaic Cells

To develop the low-cost nonfullerene acceptors (NFAs), two fully non-fused NFAs (TBT-2 and TBT-6) with ortho-bis((2-ethylhexyl)oxy)benzene unit and different side chains onto thiophene-bridges are synthesized through highly efficient synthetic procedures. Both acceptors show good planarity, low optical gaps (≈1.51 eV), and deep highest occupied molecular orbital levels (≤-5.77 eV). More importantly, the single-crystal structure of TBT-2 shows compact molecular arrangement due to the existence of intramolecular interactions between adjacent aromatic units and strong π-π stacking between intermolecular terminal groups. When the two acceptors are fabricated organic photovoltaic (OPV) cells by combining with a wide optical gap polymer donor, the TBT-6 with strong crystallization forms large domain sizes in bulk heterojunction (BHJ) blend. As a result, the TBT-6-based OPV cell shows a low power conversion efficiency (PCE) of 9.53%. In contrast, the TBT-2 with proper crystallization facilitates morphological optimization in the BHJ blend. Consequently, the TBT-2-based OPV cell gives an outstanding PCE of 13.25%, which is one of the best values among OPV cells with similar optical gaps. Overall, this work provides a practical molecular design strategy for developing high-performance and low-cost electron acceptors.

Nonfullerene Acceptor Featuring Unique Self-Regulation Effect for Organic Solar Cells with 19 % Efficiency

The blend nanomorphology of electron-donor (D) and -acceptor (A) materials is of vital importance to achieving highly efficient organic solar cells. Exogenous additives especially aromatic additives are always needed to further optimize the nanomorphology of blend films, which is hardly compatible with industrial manufacture. Herein, we proposed a unique approach to meticulously modulate the aggregation behavior of NFAs in both crystal and thin film nanomorphology via self-regulation effect. Nonfullerene acceptor Z9 was designed and synthesized by tethering phenyl groups on the inner side chains of the Y6 backbone. Compared with Y6, the tethered phenyl groups participated in the molecular aggregation via the π-π stacking of phenyl-phenyl and phenyl-2-(5,6-difluoro-3-oxo-2,3-dihydro-1H-inden-1-ylidene)malononitrile (IC-2F) groups, which induced 3D charge transport with phenyl-mediated super-exchange electron coupling. Moreover, ordered molecular packing with suitable phase separation was observed in Z9-based blend films. High power conversion efficiencies (PCEs) of 19.0 % (certified PCE of 18.6 %) for Z9-based devices were achieved without additives, indicating the great potential of the self-regulation strategy in NFA design.

Design of Chlorinated Indaceno[1,2-b:5,6-b']dithiophene Acceptors toward Efficient Organic Photovoltaics

Chlorinated modifications have been extensively employed to modulate the optoelectronic properties of π-conjugated materials. Herein, the Cl substitution in designing nonfullerene acceptors (NFAs) with various bandgaps is studied. Four narrow-bandgap electron acceptors (GS-40, GS-41, GS-42, and GS-43) were synthesized by tuning the electrostatic potential distributions of the molecular conjugated backbones. The optical absorption onset of these NFAs ranges from 900 to 1030 nm. Compared to the nonchlorinated analogue, the introduction of Cl atoms on the core of indaceno[1,2-b:5,6-b'] dithiophene (IDT) and π spacer results in an upward shift of the lowest unoccupied molecular orbital levels and induces a blue shift in the absorption spectra of the NFAs. This alteration facilitates achieving appropriate energy-level alignment and favorable bulk heterojunction morphology when blended with the widely used donor PBDB-TF. The PBDB-TF:GS-43-based solar cells show an optimal power conversion efficiency of 13.3%. This work suggests the potential of employing chlorine-modified IDT and thiophene units as fundamental building blocks for developing high-performance photoactive materials.

Unraveling the Structure-Property-Performance Relationships of Fused-Ring Nonfullerene Acceptors: Toward a C-Shaped ortho-Benzodipyrrole-Based Acceptor for Highly Efficient Organic Photovoltaics

The high-performance Y6-based nonfullerene acceptors (NFAs) feature a C-shaped A-DA'D-A-type molecular architecture with a central electron-deficient thiadiazole (Tz) A' unit. In this work, we designed and synthesized a new A-D-A-type NFA, termed CB16, having a C-shaped ortho-benzodipyrrole-based skeleton of Y6 but with the Tz unit eliminated. When processed with nonhalogenated xylene without using any additives, the binary PM6:CB16 devices display a remarkable power conversion efficiency (PCE) of 18.32% with a high open-circuit voltage (Voc) of 0.92 V, surpassing the performance of the corresponding Y6-based devices. In contrast, similarly synthesized SB16, featuring an S-shaped para-benzodipyrrole-based skeleton, yields a low PCE of 0.15% due to the strong side-chain aggregation of SB16. The C-shaped A-DNBND-A skeleton in CB16 and the Y6-series NFAs constitutes the essential structural foundation for achieving exceptional device performance. The central Tz moiety or other A' units can be employed to finely adjust intermolecular interactions. The single-crystal X-ray structure reveals that ortho-benzodipyrrole-embedded A-DNBND-A plays an important role in the formation of a 3D elliptical network packing for efficient charge transport. Solution structures of the PM6:NFAs detected by small- and wide-angle X-ray scattering (SWAXS) indicate that removing the Tz unit in the C-shaped skeleton could reduce the self-packing of CB16, thereby enhancing the complexing and networking with PM6 in the spin-coating solution and the subsequent device film. Elucidating the structure-property-performance relationships of A-DA'D-A-type NFAs in this work paves the way for the future development of structurally simplified A-D-A-type NFAs.

Coplanar Conformational Structure of π-Conjugated Polymers for Optoelectronic Applications

Hierarchical structure of conjugated polymers is critical to dominating their optoelectronic properties and applications. Compared to nonplanar conformational segments, coplanar conformational segments of conjugated polymers (CPs) demonstrate favorable properties for applications as a semiconductor. Herein, recent developments in the coplanar conformational structure of CPs for optoelectronic devices are summarized. First, this review comprehensively summarizes the unique properties of planar conformational structures. Second, the characteristics of the coplanar conformation in terms of optoelectrical properties and other polymer physics characteristics are emphasized. Five primary characterization methods for investigating the complanate backbone structures are illustrated, providing a systematical toolbox for studying this specific conformation. Third, internal and external conditions for inducing the coplanar conformational structure are presented, offering guidelines for designing this conformation. Fourth, the optoelectronic applications of this segment, such as light-emitting diodes, solar cells, and field-effect transistors, are briefly summarized. Finally, a conclusion and outlook for the coplanar conformational segment regarding molecular design and applications are provided.

Macrocyclic Encapsulation in a Non-fused Tetrathiophene Acceptor for Efficient Organic Solar Cells with High Short-Circuit Current Density

Non-fullerene acceptors have shown great promise for organic solar cells (OSCs). However, challenges in achieving high efficiency molecular system with conformational unicity and effective molecular stacking remain. In this study, we present a new design of non-fused tetrathiophene acceptor R4T-1 via employing the encapsulation of tetrathiophene with macrocyclic ring. The single crystal structure analysis reveals that cyclic alkyl side chains can perfectly encapsulate the central part of molecule and generate a conformational stable and planar molecular backbone. Whereas, the control 4T-5 without the encapsulation restriction displays cis- and twisted conformation. As a result, R4T-1 based OSCs achieved an outstanding power conversion efficiency (PCE) exceeding 15.10 % with a high short-circuit current density (Jsc ) of 25.48 mA/cm2 , which is significantly improved by ≈30 % in relative to that of the control. Our findings demonstrate that the macrocyclic encapsulation strategy could assist fully non-fused electron acceptors (FNEAs) to achieve a high photovoltaic performance and pave a new way for FNEAs design.

Deciphering the Effects of Molecular Dipole Moments on the Photovoltaic Performance of Organic Solar Cells

The dielectronic constant of organic semiconductor materials is directly related to its molecule dipole moment, which can be used to guide the design of high-performance organic photovoltaic materials. Herein, two isomeric small molecule acceptors, ANDT-2F and CNDT-2F, are designed and synthesized by using the electron localization effect of alkoxy in different positions of naphthalene. It is found that the axisymmetric ANDT-2F exhibits a larger dipole moment, which can improve exciton dissociation and charge generation efficiencies due to the strong intramolecular charge transfer effect, resulting in the higher photovoltaic performance of devices. Moreover, PBDB-T:ANDT-2F blend film exhibits larger and more balanced hole and electron mobility as well as nanoscale phase separation due to the favorable miscibility. As a result, the optimized device based on axisymmetric ANDT-2F shows a JSC of 21.30 mA cm-2 , an FF of 66.21%, and a power conversion energy of 12.13%, higher than that of centrosymmetric CNDT-2F-based device. This work provides important implications for designing and synthesizing efficient organic photovoltaic materials by tuning their dipole moment.

Embedded Host/Guest Alloy Aggregations Enable High-Performance Ternary Organic Photovoltaics

The ternary strategy has been intensively studied to improve the power conversion efficiencies of organic photovoltaics. Thereinto, the location of the guest component plays a critical role, but few reports have been devoted to this concern. Hereon, the distribution of LA1 as a guest acceptor in a variety of ternary scenarios is reported and the dominating driving forces of managing the guest distribution and operating modes are outlined. Governed by the appropriate relationship of compatibility, crystallinity, and surface energies between host and guest acceptors, as well as interfacial interactions between donor and dual acceptors, most of the LA1 molecules permeate into the internal of host acceptor phases, forming embedded host/guest alloy-like aggregations. The characteristic distributions greatly optimize the morphologies, maximize energy transfer, and enhance exciton/charge behaviors. Particularly, PM6:IT-4F:LA1 ternary cells afford high efficiency of 15.27% with impressive fill factors (FF) over 81%. The popularization studies further verify the superiority of the LA1-involved alloy structures, and with the Y6-family acceptor as the host component, an outstanding efficiency of 19.17% is received. The results highlight the importance of guest distribution in ternary systems and shed light on the governing factors of distributing the guests in ternary cells.

Impact of Polythiophene ((C4H4S)n; n = 3, 5, 7, 9) Units on the Adsorption, Reactivity, and Photodegradation Mechanism of Tetracycline by Ti-Doped Graphene/Boron Nitride (Ti@GP_BN) Nanocomposite Materials: Insights from Computational Study

This study addresses the formidable persistence of tetracycline (TC) in the environment and its adverse impact on soil, water, and microbial ecosystems. To combat this issue, an innovative approach by varying polythiophene ((C4H4S)n; n = 3, 5, 7, 9) units and the subsequent interaction with Ti-doped graphene/boron nitride (Ti@GP_BN) nanocomposites was applied as catalysts for investigating the molecular structure, adsorption, excitation analysis, and photodegradation mechanism of tetracycline within the framework of density functional theory (DFT) at the B3LYP-gd3bj/def2svp method. This study reveals a compelling correlation between the adsorption potential of the nanocomposites and their corresponding excitation behaviors, particularly notable in the fifth and seventh units of the polythiophene configuration. These units exhibit distinct excitation patterns, characterized by energy levels of 1.3406 and 924.81 nm wavelengths for the fifth unit and 1.3391 and 925.88 nm wavelengths for the seventh unit. Through exploring deeper, the examination of the exciton binding energy emerges as a pivotal factor, bolstering the outcomes derived from both UV-vis transition analysis and adsorption exploration. Notably, the calculated exciton binding energies of 0.120 and 0.103 eV for polythiophene units containing 5 and 7 segments, respectively, provide compelling confirmation of our findings. This convergence of data reinforces the integrity of our earlier analyses, enhancing our understanding of the intricate electronic and energetic interplay within these intricate systems. This study sheds light on the promising potential of the polythiophene/Ti-doped graphene/boron nitride nanocomposite as an efficient candidate for TC photodegradation, contributing to the advancement of sustainable environmental remediation strategies. This study was conducted theoretically; hence, experimental studies are needed to authenticate the use of the studied nanocomposites for degrading TC.

Comparative Study of the Optical and Electronic Properties of Y6 Derivatives: A Theoretical Study

A series of Y-series nonfullerene acceptors (Y-NFAs) including symmetric acceptors (Y6 and TTY6) as well as asymmetric acceptors (KY6, TY6, and KTY6) have been constructed, and the electronic structure, electronic properties, and excited-state properties have been comparatively studied. The optoelectronic properties, interfacial charge-transfer (CT) mechanism, and interfacial CT rate for the solar cells composed of PM6 as the donor and Y6 derivatives as the acceptors are investigated further. We show that asymmetric Y6 derivatives have high molecular planarity, strong and wide absorption spectra, and large intramolecular charge transfer (ICT). For the solar cells, the complexes of Y6 derivatives show increased open-circuit voltage, larger fill factor, and smaller energy loss compared to Y6. In addition, the complexes of Y6 derivatives have more charge-transfer states than Y6 in the low-energy region, such that there are multiple ways for CT generations, such as hot excitation, intermolecular electric field (IEF), and direct excitation. The detailed CT mechanism as well as interfacial CT rate depends on the type of complexes, and all Y6 derivatives have a similar magnitude of charge-transfer rate to the one of Y6. This work not only reveals the differences in performance between symmetric and asymmetric NFA but also reveals that proper terminal tuning is an effective way to improve photovoltaic properties.

Spontaneous-Symmetry-Breaking Charge Separation Induced by Pseudo-Jahn-Teller Distortion in Organic Photovoltaic Material

The driving force of charge separation in the initial photovoltaic conversion process is theoretically investigated using ITIC, a nonfullerene acceptor material for organic photovoltaic devices. The density functional theory calculations show that the pseudo-Jahn-Teller (PJT) distortion of the S1 excimer state induces spontaneous symmetry-breaking charge separation between the identical ITIC molecules even without the asymmetry of the surrounding environment. The strong PJT effect arises from the vibronic coupling between the pseudodegenerate S1 and S2 excited states with different irreducible representations (irreps), i.e., Au for S1 and Ag for S2, via the asymmetric vibrational mode with the Au irrep. The vibrational mode responsible for the spontaneous polarization, which is opposite in one ITIC monomer and the other, is the intramolecular C-C stretching vibration between the core IT and terminal IC units. These results suggest that controlling the PJT effect can improve the charge separation efficiency of the initial photovoltaic conversion process.

Complete Peripheral Fluorination of the Small-Molecule Acceptor in Organic Solar Cells Yields Efficiency over 19

Due to the intrinsically flexible molecular skeletons and loose aggregations, organic semiconductors, like small molecular acceptors (SMAs) in organic solar cells (OSCs), greatly suffer from larger structural/packing disorders and weaker intermolecular interactions comparing to their inorganic counterparts, further leading to hindered exciton diffusion/dissociation and charge carrier migration in resulting OSCs. To overcome this challenge, complete peripheral fluorination was performed on basis of a two-dimensional (2D) conjugation extended molecular platform of CH-series SMAs, rendering an acceptor of CH8F with eight fluorine atoms surrounding the molecular backbone. Benefitting from the broad 2D backbone, more importantly, strengthened fluorine-induced secondary interactions, CH8F and its D18 blends afford much enhanced and more ordered molecular packings accompanying with enlarged dielectric constants, reduced exciton binding energies and more obvious fibrillary networks comparing to CH6F controls. Consequently, D18:CH8F-based OSCs reached an excellent efficiency of 18.80 %, much better than that of 17.91 % for CH6F-based ones. More excitingly, by employing D18-Cl that possesses a highly similar structure to D18 as a third component, the highest efficiency of 19.28 % for CH-series SMAs-based OSCs has been achieved so far. Our work demonstrates the dramatical structural multiformity of CH-series SMAs, meanwhile, their high potential for constructing record-breaking OSCs through peripheral fine-tuning.

Design of Furan-Based Acceptors for Organic Photovoltaics

We explore a series of furan-based non-fullerene acceptors and report their optoelectronic properties, solid-state packing, photodegradation mechanism and application in photovoltaic devices. Incorporating furan building blocks leads to the expected enhanced backbone planarity, reduced band gap and red-shifted absorption of these acceptors. Still, their position in the molecule is critical for stability and device performance. We found that the photodegradation of these acceptors originates from two distinct pathways: electrocyclic photoisomerization and Diels-Alder cycloaddition of singlet oxygen. These mechanisms are of general significance to most non-fullerene acceptors, and the photostability depends strongly on the molecular structure. Placement of furans next to the acceptor termini leads to better photostability, well-balanced hole/electron transport, and significantly improved device performance. Methylfuran as the linker offers the best photostability and power conversion efficiency (>14 %), outperforming all furan-based acceptors reported to date and all indacenodithiophene-based acceptors. Our findings show the possibility of photostable furan-based alternatives to the currently omnipresent thiophene-based photovoltaic materials.

Incorporating Naphthalene and Halogen into Near-Infrared Double-Cable Conjugated Polymers for Single-Component Organic Solar Cells with Low-Voltage Losses

The invention of near-infrared pedant-based double-cable conjugated polymers has demonstrated remarkable efficacy in single-component organic solar cells (SCOSCs). This work focuses on the innovative double-cable conjugated polymers aimed at attaining good absorption and suitable energy levels. Specifically, in the aromatic side units, the electron-donating (D) part is designed using a thieno[3,4-c]pyrrole-4,6-dione (TPD) as a core unit, flanked by two cyclopentadithiophene groups on either side. The electron-deficient (A) terminal groups consist of 2-(3-oxo-2,3-dihydro-1H-cyclopenta[b]naphthalen-1-ylidene) malononitrile (NC), which can be further modified through fluorination to modulate the physical properties and packing modes of the acceptor material. The resulting double-cable conjugated polymers exhibit broad absorption spectra spanning 500-850 nm and possess lowered Frontier energy levels when incorporating fluorine elements, providing decreased voltage losses in SCOSCs. Therefore, SCOSCs fabricated using these polymers have demonstrated power conversion efficiencies ranging from 7.6 to 10.2%, in which fluorine-containing double-cable conjugated polymers showed higher PCEs due to more favorable crystalline packing, enhanced exciton dissociation probability, and charge-transporting ability.

Highly-Active Chiral Organic Photovoltaic Catalysts with Suppressed Charge Recombination

Recombination of free charges in organic semiconductors reduces the available photo-induced charge-carriers and restricts photovoltaic efficiency. In this work, the chiral organic semiconductors (Y6-R and Y6-S with enantiopure R- and S- chiral alkyl sidechains) are designed and synthesized, which show effective aggregation-induced chirality through mainchain packing with chiral conformations in non-centrosymmetric space groups with tilt chirality. Based on the analysis of spin-injection, magnetic-hysteresis loop, and thermodynamics and dynamics of the excited state, we suggest that the aggregation-induced chirality can generate spin-polarization, which suppresses charge recombination and offers more available charge-carriers within Y6-R and Y6-S relative to the achiral counterpart (Y6). Then the chiral Y6-R and Y6-S show enhanced catalytic activity with optimal average hydrogen evolution rates of 205 and 217 mmol h-1  g-1 , respectively, 60-70 % higher than Y6, when they are employed as nanoparticle photocatalysts in photocatalytic hydrogen evolution under simulated solar light, AM1.5G, 100 mW cm-2 .

Interactions between nonfullerene acceptors lead to unstable ternary organic photovoltaic cells

For organic photovoltaic (OPV) devices to achieve consistent performance and long operational lifetimes, organic semiconductors must be processed with precise control over their purity, composition, and structure. This is particularly important for high volume solar cell manufacturing where control of materials quality has a direct impact on yield and cost. Ternary-blend OPVs containing two acceptor-donor-acceptor (A-D-A)-type nonfullerene acceptors (NFAs) and a donor have proven to be an effective strategy to improve solar spectral coverage and reduce energy losses beyond that of binary-blend OPVs. Here, we show that the purity of such a ternary is compromised during blending to form a homogeneously mixed bulk heterojunction thin film. We find that the impurities originate from end-capping C=C/C=C exchange reactions of A-D-A-type NFAs, and that their presence influences both device reproducibility and long-term reliability. The end-capping exchange results in generation of up to four impurity constituents with strong dipolar character that interfere with the photoinduced charge transfer process, leading to reduced charge generation efficiency, morphological instabilities, and an increased vulnerability to photodegradation. As a consequence, the OPV efficiency falls to less than 65% of its initial value within 265 h when exposed to up to 10 suns intensity illumination. We propose potential molecular design strategies critical to enhancing the reproducibility as well as reliability of ternary OPVs by avoiding end-capping reactions.

Exploring the photovoltaic properties of promising non-fullerene acceptors with different degrees of asymmetry due to halogenations of terminal groups

Over the past few years, the strategy of asymmetric modification has become popular for designing new photovoltaic materials because it can effectively improve optoelectronic performance and morphology, therefore power conversion efficiency (PCE). However, how the halogenations (to further change asymmetry) of terminal groups (TGs) of an asymmetric small-molecule non-fullerene acceptor (Asy-SM-NFA) influence optoelectronic properties is still not very clear. In this work, we have selected a promising Asy-SM-NFA IDTBF (the OSC based on it has a PCE of 10.43 %), exacerbated the asymmetry through fluorinations of TGs, and finally designed six new molecules. Based on density functional theory (DFT) and time-dependent DFT calculations, we systematically examine how the changed asymmetry impacts the optoelectronic properties. We find that the halogenations of TGs may significantly affect the molecular planarity, dipole moment, electrostatic potential, exciton binding energy, energy loss, and absorption spectrum. And the results show that newly designed BR-F1 and IM-mF (m = 1,3, and 4) are potential Asy-SM-NFAs because they all have enhanced absorption spectra in the visible region. Therefore, we provide a meaningful direction for the design of asymmetric NFA.

Non-Fullerene Acceptors with Benzodithiophene-Based Fused Planar Ring Cores for Organic Solar Cells

Fused aromatic rings are widely employed in organic solar cell (OSC) materials due to their planarity and rigidity. Here, we designed and synthesized four two-dimensional non-fullerene acceptors, D6-4F, D6-4Cl, DTT-4F, and DTT-4Cl, based on two new fused planar ring structures of f-DTBDT-C6 and f-DTTBDT. Owing to the desirable phase separation formed in the blend films and the higher energy levels induced by the extra alkyl groups, PM6:D6-4F-based devices achieved a high V_OC = 0.91 V with PCE = 11.10%, FF = 68.54%, and J_SC = 17.75 mA/cm². Because of the longer π-conjugation of the f-DTTBDT core with nine fused rings, DTT-4F and DTT-4Cl showed high molar extinction coefficients and broad absorption bands that enhanced the current density of OSCs. Finally, the PM6:DTT-4F-based devices achieved a J_SC = 19.82 mA/cm² with PCE = 9.68%, V_OC = 0.83 V, and FF = 58.85%.

tert-Butyl (E)-3-oxo-2-(3-oxoisobenzofuran-1(3H)-ylidene)butanoate

Non-fullerene acceptors have recently attracted much attention as components of organic solar cells. 1H-indene-1,3(2H)-dione is a key compound for the synthesis of the end-capping component of non-fullerene acceptors. In this communication, an intermediate for the synthesis of this compound, tert-butyl (E)-3-oxo-2-(3-oxoisobenzofuran-1(3H)-ylidene)butanoate, was prepared by the reaction between phthalic anhydride and tert-butyl acetoacetate. Further treatment with sodium methoxide in methanol led to the formation of 1H-indene-1,3(2H)-dione in a high yield. The structure of the newly synthesized compound was established by means of elemental analysis, high-resolution mass spectrometry, 1H, 13C NMR, IR spectroscopy, mass spectrometry and X-ray analysis.

Enhancing the Photovoltaic Properties via Incorporation of Selenophene Units in Organic Chromophores with A2-π2-A1-π1-A2 Configuration: A DFT-Based Exploration

Currently, polymer organic solar cells (POSCs) are widely utilized due to their significant application, such as low-cost power conversion efficiencies (PCEs). Therefore, we designed a series of photovoltaic materials (D1, D2, D3, D5 and D7) by the incorporation of selenophene units (n = 1-7) as π₁-spacers by considering the importance of POSCs. Density functional theory (DFT) calculations were accomplished at MPW1PW91/6-311G (d, p) functional to explore the impact of additional selenophene units on the photovoltaic behavior of the above-mentioned compounds. A comparative analysis was conducted for designed compounds and reference compounds (D1). Reduction in energy gaps (∆E = 2.399 - 2.064 eV) with broader absorption wavelength (λ_max = 655.480 - 728.376 nm) in chloroform along with larger charge transference rate was studied with the addition of selenophene units as compared to D1. A significantly higher exciton dissociation rate was studied as lower values of binding energy (E_b = 0.508 - 0.362 eV) were noted in derivatives than in the reference (E_b = 0.526 eV). Moreover, transition density matrix (TDM) and density of state (DOS) data also supported the efficient charge transition origination from HOMOs to LUMOs. Open circuit voltage (V_oc) was also calculated for all the aforesaid compounds to check the efficiency, and significant results were seen (1.633-1.549 V). All the analyses supported our compounds as efficient POSCs materials with significant efficacy. These compounds might encourage the experimental researchers to synthesize them due to proficient photovoltaic materials.

The Multiplicity of π-π Interactions of Fused-Ring Electron Acceptor Polymorphs on the Exciton Migration and Charge Transport

Efficient long-range exciton migration and charge transport are the key parameters for organic photovoltaic materials, which strongly depend on the molecular stacking modes. Herein, we extracted the stacked structures of the archetype fused-ring electron acceptor molecule, ITIC, based on the information on four polymorphic crystals and investigated the relationship between molecular stacking modes and exciton migration/charge transport properties through the intermolecular Coulomb coupling and charge transfer integral calculation. Experimentally, the thin film texture is crystallized through a post-annealing treatment through grazing-incidence wide-angle X-ray scattering (GIWAXS) measurements, which lead to the enhanced exciton migration through exciton-exciton annihilation in the femtosecond transient absorption (fs-TA) measurements. This work demonstrates the relationship between the molecular arrangement and the exciton migration and electron transport and highlights the significance of optimizing molecular stacking for the development of high-performance electron acceptor materials.

Recent Research Progress of Organic Small-Molecule Semiconductors with High Electron Mobilities

Organic electronics has made great progress in the past decades, which is inseparable from the innovative development of organic electronic devices and the diversity of organic semiconductor materials. It is worth mentioning that both of these great advances are inextricably linked to the development of organic high-performance semiconductor materials, especially the representative n-type organic small-molecule semiconductor materials with high electron mobilities. The n-type organic small molecules have the advantages of simple synthesis process, strong intermolecular stacking, tunable molecular structure, and easy to functionalize structures. Furthermore, the n-type semiconductor is a remarkable and important component for constructing complementary logic circuits and p-n heterojunction structures. Therefore, n-type organic semiconductors play an extremely important role in the field of organic electronic materials and are the basis for the industrialization of organic electronic functional devices. This review focuses on the modification strategies of organic small molecules with high electron mobility at molecular level, and discusses in detail the applications of n-type small-molecule semiconductor materials with high mobility in organic field-effect transistors, organic light-emitting transistors, organic photodetectors, and gas sensors.

Over 19% Efficiency Organic Solar Cells by Regulating Multidimensional Intermolecular Interactions

Research on organic solar cells (OSCs) has progressed through material innovation and device engineering. However, well-known and ubiquitous intermolecular interactions, and particularly their synergistic effects, have received little attention. Herein, the complicated relationship between photovoltaic conversion and multidimensional intermolecular interactions in the active layers is investigated. These interactions are dually regulated by side-chain isomerization and end-cap engineering of the acceptors. The phenylalkyl featured acceptors (LA-series) exhibit stronger crystallinity with preferential face-on interactions relative to the alkylphenyl attached isomers (ITIC-series). In addition, the PM6 and LA-series acceptors exhibit moderate donor/acceptor interactions compared to those of the strongly interacting PM6/ITIC-series pairs, which helps to enhance phase separation and charge transport. Consequently, the output efficiencies of all LA series acceptors are over 14%. Moreover, LA-series acceptors show appropriate compatibility, host/guest interactions, and crystallinity relationships with BTP-eC9, thereby leading to uniform and well-organized "alloy-like" mixed phases. In particular, the highly crystalline LA23 further optimizes multiple interactions and ternary microstructures, which results in a high efficiency of 19.12%. Thus, these results highlight the importance of multidimensional intermolecular interactions in the photovoltaic performance of OSCs.

Design of a Fully Non-Fused Bulk Heterojunction toward Efficient and Low-Cost Organic Photovoltaics

To modulate the miscibility between donor and acceptor materials both possessing fully non-fused ring structures, a series of electron acceptors (A4T-16, A4T-31 and A4T-32) with different polar functional substituents were synthesized and investigated. The three acceptors show good planarity, high conformational stability, complementary absorption and energy levels with the non-fused polymer donor (PTVT-BT). Among them, A4T-32 possesses the strongest polar functional group and shows the highest surface energy, which facilitates morphological modulation in the bulk heterojunction (BHJ) blend. Benefiting from the proper morphology control method, an impressive power conversion efficiency (PCE) of approaching 16.0 % and a superior fill factor over 0.795 are achieved in the PTVT-BT : A4T-32-based organic photovoltaic cells with superior photoactive materials price advantage, which represent the highest value for the cells based on the non-fused blend films. Notably, this cell maintains ≈84 % of its initial PCE after nearly 2000 h under the continuous simulated 1-sun-illumination. In addition, the flexible PTVT-BT : A4T-32-based cells were fabricated and delivered a decent PCE of 14.6 %. This work provides an effective molecular design strategy for the non-fused non-fullerene acceptors (NFAs) from the aspect of bulk morphology control in fully non-fused BHJ layers, which is crucial for their practical applications.

Incorporation of a Boron-Nitrogen Covalent Bond Improves the Charge-Transport and Charge-Transfer Characteristics of Organoboron Small-Molecule Acceptors for Organic Solar Cells

An organoboron small-molecular acceptor (OSMA) M_B←N containing a boron-nitrogen coordination bond (B←N) exhibits good light absorption in organic solar cells (OSCs). In this work, based on M_B←N, OSMA M_B-N, with the incorporation of a boron-nitrogen covalent bond (B-N), was designed. We have systematically investigated the charge-transport properties and interfacial charge-transfer characteristics of M_B-N, along with M_B←N, using the density functional theory (DFT) and the time-dependent density functional theory (TD-DFT). Theoretical calculations show that M_B-N can simultaneously boost the open-circuit voltage (from 0.78 V to 0.85 V) and the short-circuit current due to its high-lying lowest unoccupied molecular orbital and the reduced energy gap. Moreover, its large dipole shortens stacking and greatly enhances electron mobility by up to 5.91 × 10^-3 cm²·V^-1·s^-1. Notably, the excellent interfacial properties of PTB7-Th/M_B-N, owing to more charge transfer states generated through the direct excitation process and the intermolecular electric field mechanism, are expected to improve OSCs performance. Together with the excellent properties of M_B-N, we demonstrate a new OSMA and develop a new organoboron building block with B-N units. The computations also shed light on the structure-property relationships and provide in-depth theoretical guidance for the application of organoboron photovoltaic materials.

Reducing Trap Density in Organic Solar Cells via Extending the Fused Ring Donor Unit of an A-D-A-Type Nonfullerene Acceptor for Over 17% Efficiency

The high trap density (generally 10¹⁶ to 10¹⁸  cm^-3 ) in thin films of organic semiconductors is the primary reason for the inferior charge-carrier mobility and large nonradiative recombination energy loss (ΔE_nr ) in organic solar cells (OSCs), limiting improvement in power conversion efficiencies (PCEs). In this study, the trap density in OSCs is efficiently reduced via extending the donor core of nonfullerene acceptors (NFAs) from a heptacyclic unit to a nonacyclic unit. TTPIC-4F with a nonacyclic unit has stronger intramolecular and intermolecular interactions, affording higher crystallinity in thin films relative to its counterpart BTPIC-4F. Thus, the D18:TTPIC-4F-based device achieves a lower trap density of 4.02 × 10¹⁵  cm^-3 , comparable to some typical high-performance inorganic/hybrid semiconductors, with higher mobility and inhibited charge-carrier recombination in devices. Therefore, the D18:TTPIC-4F-based OSC exhibits an impressive PCE of 17.1% with a low ΔE_nr of 0.208 eV, which is the best known value for A-D-A-type NFAs. Therefore, extending the donor core of NFAs is an efficient method for suppressing trap states in OSCs for high PCEs.

Toward Quantifying the Relation between Exciton Binding Energies and Molecular Packing

Reducing the exciton binding energy E_b of organic photoactive materials is critical to minimize the energy loss and improve the photovoltaic efficiency of organic solar cells. However, the relation between the E_b and molecular packing is not well understood. Herein, the E_b in the crystals of a series of A-D-A type nonfullerene acceptors with different lengths of alkyl side chains has been examined by self-consistent quantum mechanics/embedded charge calculations. The variation of molecular packing induced by the different alkyl chains can have an important impact on the polarization effect of charge carriers and thereby the E_b. More interestingly, the E_b values are found to be linearly increased with the ratio of the void fraction vs the packing coefficient of molecular backbones in the solid crystals. Owing to the smallest ratio, a remarkable low E_b of several tens of meV is achieved for the acceptor with an optimal length of alkyl chains.