High-density encapsulation of Fe3O4 nanoparticles in lipid vesicles

Magnetoresponsive liposomes applications in nanomedicine: A comprehensive review

Safe and effective cancer therapy requires a suitable nanocarrier that can target particular sites, such as cancer cells, in a selective manner. With the tremendous growth in nanotechnology, liposomes, among various competing nanocarriers, have shown promising advances in cancer therapy. Magnetic nanoparticles and metal ions are wide-reaching candidates for conferring magnetic properties and for incorporation into liposomes. Combining liposomes with magnetic structures enables construction of magnetoresponsive liposomes, allowing stimuli-responsiveness to an alternating magnetic field, magnetic targeting, and tracking by magnetic resonance imaging, which could all occur in parallel. This review presents a comprehensive analysis of the practical advances and novel aspects of design, synthesis and engineering magnetoresponsive liposomes, emphasizing their diverse properties for various applications. Our work explores the innovative uses of these structures, extending beyond drug delivery to include smart contrast agents, cell labeling, biosensing, separation, and filtering. By comparing new findings with earlier studies, we showcase significant improvements in efficiency and uncover new potentials, setting a new benchmark for future research in the field of magnetoresponsive liposomes.

Pressure-Controlled Encapsulation of Graphene Quantum Dots into Liposomes by the Reverse-Phase Evaporation Method

Ultrasmall nanoparticles (USNPs) with sizes below 10 nm have shown great potentials in medical applications owing to their outstanding physical, chemical, optical, and biological properties. However, they suffer from a rapid renal clearance and biodegradation rate in the biological environment due to the small size. Liposomes are one of the most promising delivery nanocarriers for loading USNPs because of their excellent biocompatibility and lipid bilayer structure. Encapsulation of USNPs into liposomes in an efficient and controllable manner remains a challenge. In this study, we achieved a high loading of graphene quantum dots (GQDs, ∼4 nm), a typical USNP, into the aqueous core of liposomes (45.68 ± 1.44%), which was controllable by the pressure. The GQDs-loaded liposomes (GQDs-LPs) exhibited a very good aqueous stability for over a month. Furthermore, indocyanine green (ICG), an efficient near-infrared (NIR) photothermal agent, was introduced in the GQDs-LP system that could convert NIR laser energy into thermal energy and break down the liposomes, causing the release of GQDs in 6 min. Moreover, this NIR light-controlled release system (GQDs-ICG-LPs) also exhibited a good photothermal therapeutic performance in vitro, and 75% of cancer cells were killed at a concentration of 200 μg/mL. Overall, the successful development of the NIR light-controlled release system has laid a solid foundation for the future biomedical application of USNPs-loaded liposomes.

Review on the advancements of magnetic gels: towards multifunctional magnetic liposome-hydrogel composites for biomedical applications

Magnetic gels have been gaining great attention in nanomedicine, as they combine features of hydrogels and magnetic nanoparticles into a single system. The incorporation of liposomes in magnetic gels further leads to a more robust multifunctional system enabling more functions and spatiotemporal control required for biomedical applications, which includes on-demand drug release. In this review, magnetic gels components are initially introduced, as well as an overview of advancements on the development, tuneability, manipulation and application of these materials. After a discussion of the advantages of combining hydrogels with liposomes, the properties, fabrication strategies and applications of magnetic liposome-hydrogel composites (magnetic lipogels or magnetolipogels) are reviewed. Overall, the progress of magnetic gels towards smart multifunctional materials are emphasized, considering the contributions for future developments.

The clearance and biodistribution of magnetic composite nanoparticles in healthy and osteoarthritic rat knees

Intra-articular injections are the most direct route for administering osteoarthritis (OA) therapies, yet how drug carriers distribute within the joint remains understudied. To this end, we developed a magnetic composite nanoparticle that can be tracked with fluorescence in vivo via an in vivo imaging system (IVIS), and quantified ex vivo via electron paramagnetic resonance (EPR) spectroscopy. Using this particle, the effects of age and OA pathogenesis on particle clearance and distribution were evaluated in the medial meniscus transection model of OA (5-, 10-, and 15-month old male Lewis rats). At 9 weeks after meniscus transection, composite nanoparticles were injected and joint clearance was assessed via IVIS. At 2 weeks after injection, animals were euthanized and particle distribution was quantified ex vivo via EPR spectroscopy. IVIS and EPR spectroscopy data indicate a predominant amount of particles remained in the joint after 14 days. EPR spectroscopy data suggests particles cleared more slowly from OA knees than from the contralateral control, with particles clearing more slowly from 15-month old rats than from 5- and 10-month old rats. This study demonstrates the importance of including both age and OA as factors when evaluating nanoparticles for intra-articular drug delivery.

DNA-directed arrangement of soft synthetic compartments and their behavior in vitro and in vivo

DNA has been widely used as a key tether to promote self-organization of super-assemblies with emergent properties. However, control of this process is still challenging for compartment assemblies and to date the resulting assemblies have unstable membranes precluding in vitro and in vivo testing. Here we present our approach to overcome these limitations, by manipulating molecular factors such as compartment membrane composition and DNA surface density, thereby controlling the size and stability of the resulting DNA-linked compartment clusters. The soft, flexible character of the polymer membrane and low number of ssDNA remaining exposed after cluster formation determine the interaction of these clusters with the cell surface. These clusters exhibit in vivo stability and lack of toxicity in a zebrafish model. To display the breadth of therapeutic applications attainable with our system, we encapsulated the medically established enzyme laccase within the inner compartment and demonstrated its activity within the clustered compartments. Most importantly, these clusters can interact selectively with different cell lines, opening a new strategy to modify and expand cellular functions by attaching such pre-organized soft DNA-mediated compartment clusters on cell surfaces for cell engineering or therapeutic applications.

Recent Advances in Magnetite Nanoparticle Functionalization for Nanomedicine

Functionalization of nanomaterials can enhance and modulate their properties and behaviour, enabling characteristics suitable for medical applications. Magnetite (Fe3O4) nanoparticles are one of the most popular types of nanomaterials used in this field, and many technologies being already translated in clinical practice. This article makes a summary of the surface modification and functionalization approaches presented lately in the scientific literature for improving or modulating magnetite nanoparticles for their applications in nanomedicine.

Liposomes for delivery of antioxidants in cosmeceuticals: Challenges and development strategies

Antioxidants (AOs) play a crucial role in the protection and maintenance of health and are also integral ingredients in beauty products. Unfortunately, most of them are sensitive due to their instability and insolubility. The use of liposomes to protect AOs and expand their applicability to cosmeceuticals, thereby, is one of the most effective solutions. Notwithstanding their offered advantages for the delivery of AOs, liposomes, in their production and application, present many challenges. Here, we provide a critical review of the major problems complicating the development of liposomes for AO delivery. Along with issues related to preparation techniques and encapsulation efficiency, the loss of protective function and inefficiency of skin permeability are the main disadvantages of liposomes. Corresponding development strategies for resolving these problems, with their respective advantages and drawbacks, are introduced, discussed in some depth, and summarized in these pages as well. Advanced liposomes have a vital role to play in the development and delivery of AOs in practical cosmeceutical product applications.

A Light-Triggered Mesenchymal Stem Cell Delivery System for Photoacoustic Imaging and Chemo-Photothermal Therapy of Triple Negative Breast Cancer

Targeted therapy is highly challenging and urgently needed for patients diagnosed with triple negative breast cancer (TNBC). Here, a synergistic treatment platform with plasmonic-magnetic hybrid nanoparticle (lipids, doxorubicin (DOX), gold nanorods, iron oxide nanocluster (LDGI))-loaded mesenchymal stem cells (MSCs) for photoacoustic imaging, targeted photothermal therapy, and chemotherapy for TNBC is developed. LDGI can be efficiently taken up into the stem cells with good biocompatibility to maintain the cellular functions. In addition, CXCR4 on the MSCs is upregulated by iron oxide nanoparticles in the LDGI. Importantly, the drug release and photothermal therapy can be simultaneously achieved upon light irradiation. The released drug can enter the cell nucleus and promote cell apoptosis. Interestingly, light irradiation can control the secretion of cellular microvehicles carrying LDGI for targeted treatment. A remarkable in vitro anticancer effect is observed in MDA-MB-231 with near-infrared laser irradiation. In vivo studies show that the MSCs-LDGI has the enhanced migration and penetration abilities in the tumor area via both intratumoral and intravenous injection approaches compared with LDGI. Subsequently, MSCs-LDGI shows the best antitumor efficacy via chemo-photothermal therapy compared to other treatment groups in the TNBC model of nude mice. Thus, MSCs-LDGI multifunctional system represents greatly synergistic potential for cancer treatment.

Water dispersible surface-functionalized platinum/carbon nanorattles for size-selective catalysis

Selective dealloying of metal nanoparticles results in rattle-type hollow carbon nanoshells enclosing platinum nanoparticles, which are able to perform size-selective catalysis. Selective functionalization of the outer graphene-like carbon surface prevents agglomeration and leads to well dispersible nanocatalysts in aqueous solutions. The synthesis starts with the production of nanoparticles with a cobalt-platinum-alloy core surrounded by graphene-like carbon via reducing flame spray synthesis. After surface functionalization, simultaneous pore formation in the shell-wall and dissolution of the cobalt results in platinum encapsulated in hollow carbon nanospheres. Catalytic oxidation of differently sized sugars (glucose and maltoheptaose) reveales size-selective catalytic properties of these platinum nanorattles.

Encapsulation of Zwitterionic Au Nanocrystals into Liposomes by Reverse Phase Evaporation Method: Influence of the Surface Charge

Since both liposomes and nanoparticles have shown great potential in application for clinical diagnostics and therapeutics, the perfect combination of the two materials is appealing for further improving the theranostic effect. Therefore, fabrication of liposomes loaded with nanoparticles in a controllable manner is desirable. Detection of various factors affecting encapsulation needs to be assigned. Here, we use zwitterionic Au nanoparticles (Au_±NPs) coated with a mixture of 11-mercaptoundecanoic acid and N,N,N-trimethyl(11-mercaptoundecyl) ammonium chloride to study their encapsulation behavior by reversed phase evaporation (REV) method. To produce a reverse emulsion, an organic solution of dipalmitoylphosphatidylcholine (DPPC) and 1,2-dioleoyl-sn-glycero-3-phosphoethanolamine-N-[methoxy(poly(ethylene glycol))-2000] (ammonium salt) (PEG2000-DOPE) is mixed with an aqueous Au_±NP colloidal solution under sonication. The pH of the colloidal solution controls the surface charge of the Au_±NPs and then tunes the interactions between Au_±NPs and phospholipids. At lower pH, the positive surface charges favor Au_±NP transfer into the organic phase and consequently prevent their encapsulation into liposomes. The efficiency in encapsulation is markedly improved by increasing the pH of the Au_±NP colloidal solution. The highest efficiency is obtained at a pH value slightly larger than the isoelectric point. Further pH increase induces a decrease in encapsulation efficiency. This is due to increase of the repulsive forces between Au_±NPs and phospholipids indicating that both the nature (positive or negative) and the amount of surface charge are key parameters in the encapsulation efficiency. We also find that the increase in Au_±NP concentration favors the encapsulation process.

In vitro stability and cytotoxicity analysis of liposomes anchored with octylamine-graft-poly (aspartic)

Due to the polymer, octylamine-graft-poly (aspartic) (PASP-g-C₈), which acted as acidic triggered molecules, liposomes anchored with PASP-g-C₈ (OPLPs) could be safe and efficient pH sensitive drug carriers and target tumor cells.

Lipid-coated gold nanocomposites for enhanced cancer therapy

The aim of the work reported here was to develop lipid-coated multifunctional nanocomposites composed of drugs and nanoparticles for use in cancer therapy. We incorporated thermosensitive phospholipids onto the surface of anisotropic gold nanoparticles (AuNPs) to further enhance drug delivery, with possible additional applications for in vivo imaging and photothermal cancer therapy. Lipid-coated nanohybrids loaded with the drug docetaxel (DTX) were prepared by a thin-film formation, hydration, and sonication method. Nanoparticles and their composites were characterized using particle-size analysis, zeta potential measurements, transmission electron microscopy, UV-visible spectroscopy, and reverse-phase high-performance liquid chromatography, demonstrating successful loading of DTX into the lipid bilayer on the surface of the gold nanoparticles. Initial in vitro studies using breast-cancer (MCF-7) and melanoma (B16F10) cell lines demonstrated that the drug-containing nanocomposites at equivalent drug concentrations caused significant cytotoxicity compared to free DTX. Differential flow cytometry analysis confirmed the improved cellular uptake of lipid-coated nanocomposites. Our preliminary results show that DTX-loaded anionic lipid-coated gold nanorod (AL_AuNR_DTX) and cationic lipid-coated gold nanoparticle (CL_AuNP_DTX) possess effective tumor cell-suppression abilities and can therefore be considered promising chemotherapeutic agents. Further evaluation of the therapeutic efficacy of these hybrid nanoparticles combined with external near-infrared photothermal treatment is warranted to assess their synergistic anticancer actions and potential bioimaging applications.

Nanodisco balls: control over surface versus core loading of diagnostically active nanocrystals into polymer nanoparticles

Nanoparticles of complex architectures can have unique properties. Self-assembly of spherical nanocrystals is a high yielding route to such systems. In this study, we report the self-assembly of a polymer and nanocrystals into aggregates, where the location of the nanocrystals can be controlled to be either at the surface or in the core. These nanospheres, when surface decorated with nanocrystals, resemble disco balls, thus the term nanodisco balls. We studied the mechanism of this surface loading phenomenon and found it to be Ca(2+) dependent. We also investigated whether excess phospholipids could prevent nanocrystal adherence. We found surface loading to occur with a variety of nanocrystal types including iron oxide nanoparticles, quantum dots, and nanophosphors, as well as sizes (10-30 nm) and shapes. Additionally, surface loading occurred over a range of polymer molecular weights (∼30-3000 kDa) and phospholipid carbon tail length. We also show that nanocrystals remain diagnostically active after loading onto the polymer nanospheres, i.e., providing contrast in the case of magnetic resonance imaging for iron oxide nanoparticles and fluorescence for quantum dots. Last, we demonstrated that a fluorescently labeled protein model drug can be delivered by surface loaded nanospheres. We present a platform for contrast media delivery, with the unusual feature that the payload can be controllably localized to the core or the surface.

Stabilized magnetic cerasomes for drug delivery

Doxorubicin hydrochloride (DOX)-loaded magnetic cerasomes (DLMCs) were successfully constructed by loading both hydrophobic Fe3O4 nanoparticles (NPs) and antitumor drug DOX into the aqueous interior of cerasomes via facile one-step construction. A possible explanation is that the hydrophobic Fe3O4 NPs can be trapped inside the aqueous core of cerasomes through the formation of an intermediate Fe3O4/micelle complex. It was found that the loading content of Fe3O4 in DLMCs could reach the maximum at a Fe3O4/lipid molar ratio of 4:1. Moreover, DLMCs demonstrated high superparamagnetism and responded strongly to magnetic fields. In addition, DLMCs had a high encapsulation efficiency of 43.4 ± 4.7% and a high drug loading content of 3.2 ± 1.3%. In comparison to drug-loaded liposomes, DLMCs exhibited higher storage stability and better sustained release behavior. A cellular uptake study showed that the use of an external magnetic field enables a rapid and efficient uptake of DLMCs by cancer cells, resulting in higher capability to kill tumor cells than non-magnetic drug-loaded cerasomes. This study suggests that magnetic cerasome offers a potential and effective drug carrier for anticancer applications.

Magnetoliposomes and their potential in the intelligent drug-delivery field

Research advancements for magnetically guided drug delivery encompass not only the improvement of the design, synthesis and evaluation of more selective nanomaterials bearing magnetic properties, but also the optimization of the transport and delivery of magnetic agents. Such versatile platforms can be utilized for simultaneously carrying therapeutics and diagnostics.

Ultra magnetic liposomes for MR imaging, targeting, and hyperthermia

Magnetic liposomes offer opportunities as theranostic systems. The prerequisite for efficient imaging, tissue targeting or hyperthermia is high magnetic load of these vesicles. Here we describe the preparation of Ultra Magnetic Liposomes (UMLs), which may encapsulate iron oxide nanoparticles in a volume fraction of up to 30%. This remarkable magnetic charge provides UMLs with high magnetic mobilities, MRI relaxivities, and heating capacities for magnetic hyperthermia. Moreover, these UMLs are rapidly and efficiently internalized by cultured tumor cells and, when they are administered to mice, they can be vectorized to tumors by an external magnet.

Structural and thermal analysis of lipid vesicles encapsulating hydrophobic gold nanoparticles

The structure and stability of hybrid lipid vesicles containing bilayer-encapsulated hydrophobic nanoparticles is dependent upon lipid phase behavior. By embedding stearylamine-stabilized gold nanoparticles in dipalmitoylphosphatidylcholine/dipalmitoylphosphatidylglycerol vesicles, we show that encapsulation at lipid to nanoparticle ratios from 10,000:1 to 5000:1 leads to bilayer thickening and hydrophobic mismatch, favoring nanoparticle inclusion in gel phase vesicles. High loadings lead to large increases in the gel to fluid melting temperature upon heating and significant hysteresis on cooling, which cannot be attributed solely to excess free ligand. This behavior is due to a cooperative effect of excess free SA ligand and nanoparticle embedment. Nanoparticle clustering was observed during lipid melting and could be reversed upon lipid freezing owing to lateral capillary forces within the bilayer. The impact of nanoparticle embedment on vesicle structure and properties at such low concentrations is reminiscent of hydrophobic proteins, suggesting that the underlying lipid biophysics between proteins and nanoparticle are similar and may provide a predictive design tool for therapeutic applications.

Nanoparticle actuated hollow drug delivery vehicles

The trend towards personalized medicine and the long-standing wish to reduce drug consumption and unwanted side effects have been the driving force behind research on drug delivery vehicles that control localization, timing and dose of released cargo. Controlling location and timing of the release allows using more potent drugs as the interaction with the right target is ensured and enables sequential drug release. A particularly desired solution allows for externally triggered release of encapsulated compounds. Externally controlled release can be accomplished if drug delivery vehicles, such as liposomes or polyelectrolyte multilayer capsules, incorporate nanoparticle (NP) actuators. However, close control over the structure of the composite material is necessary to harness this potential. This review describes the assembly and characterization of NP functionalized liposomes and polyelectrolyte multilayer capsules that allow for externally triggered cargo release. Special attention is paid to the relationship between NP stability and the assembly and performance of NP functionalized drug delivery vehicles.

Polyhedral magnetite nanocrystals with multiple facets: facile synthesis, structural modelling, magnetic properties and application for high capacity lithium storage

Polyhedral magnetite nanocrystals with multiple facets were synthesised by a low temperature hydrothermal method. Atomistic simulation and calculations on surface attachment energy successfully predicted the polyhedral structure of magnetite nanocrystals with multiple facets. X-ray diffraction, field emission scanning electron microscopy, and high resolution transmission microscopy confirmed the crystal structure of magnetite, which is consistent with the theoretical modelling. The magnetic property measurements show the superspin glass state of the polyhedral nanocrystals, which could originate from the nanometer size of individual single crystals. When applied as an anode material in lithium ion cells, magnetite nanocrystals demonstrated an outstanding electrochemical performance with a high lithium storage capacity, a satisfactory cyclability, and an excellent high rate capacity.

Magnetoliposomes with high USPIO entrapping efficiency, stability and magnetic properties

The DRV technique (followed by extrusion) was used for construction of hydrophilic-USPIO encapsulating liposomes. Magnetoliposomes (ML) were characterized for size, surface charge, entrapment, physical stability and magnetic properties (relaxivity). Results show that nanosized extruded-DRV MLs encapsulate higher amounts of USPIOs in comparison with sonicated vesicles. Fe (III) encapsulation efficiency (EE) is 12%, the highest reported to date for nanosized MLs. EE of MLs is influenced by ML membrane composition and polyethyleneglycol (PEG) coating. PEG-coating increases ML EE and stability; however, r(2)-to-r(1) ratios decrease (in comparison with non-PEGylated MLs). Most ML-types are efficient T2 contrast agents (because r(2)-to-r(1) ratios are higher than that of free USPIOs). Targeted MLs were formed by successfully immobilizing OX-26 monoclonal antibody on ML surface (biotin-streptavidin ligation), without significant loss of USPIOs. Targeted MLs retained their nanosize and integrity during storage for 1 month at 4 °C and up to 2 weeks at 37 °C.

Stimuli-responsive liposome-nanoparticle assemblies

INTRODUCTION

Nanoscale assemblies are needed that achieve multiple therapeutic objectives, including cellular targeting, imaging, diagnostics and drug delivery. These must exhibit high stability, bioavailability and biocompatibility, while maintaining or enhancing the inherent activity of the therapeutic cargo. Liposome-nanoparticle assemblies (LNAs) combine the demonstrated potential of liposome-based therapies, with functional nanoparticles. Specifically, LNAs can be used to concentrate and shield the nanoparticles and, in turn, stimuli-responsive nanoparticles that respond to external fields can be used to control liposomal release. The ability to design LNAs via nanoparticle encapsulation, decoration or bilayer-embedment offers a range of configurations with different structures and functions.

AREAS COVERED

This paper reviews the current state of research and understanding of the design, characterization and performance of LNAs. A brief overview is provided on liposomes and nanoparticles for therapeutic applications, followed by a discussion of the opportunities and challenges associated with combining the two in a single assembly to achieve controlled release via light or radiofrequency stimuli.

EXPERT OPINION

LNAs offer a unique opportunity to combine the therapeutic properties of liposomes and nanoparticles. Liposomes act to concentrate small nanoparticles and shield nanoparticles from the immune system, while the nanoparticle can be used to initiate and control drug release when exposed to external stimuli. These properties provide a platform to achieve nanoparticle-controlled liposomal release. LNA design and application are still in infancy. Research concentrating on the relationships among LNA structure, function and performance is essential for the future clinical use of LNAs.

Facile synthesis of water-stable magnetite nanoparticles for clinical MRI and magnetic hyperthermia applications

AIMS

Superparamagnetic magnetite nanoparticles have been under intensive investigation in nanomedicine. However, it is still a challenge to synthesize high-quality water-stable magnetite nanoparticles for better magnetic performance and less side effects in medical MRI and nanothermotherapy.

MATERIALS & METHODS

We successfully synthesized hydrophilic magnetite nanoparticles through thermal decomposition of Fe(acac)(3) in triethylene glycol, which were coated with a triethylene glycol layer and thus demonstrated excellent water stability.

RESULTS

The optimized deposition temperature has been found to be 250°C (IO-250 NPs). The magnetic and thermal properties as well as the cytotoxicity of IO-250 NPs were investigated. In vitro experiments have demonstrated high cellular uptake and low cytotoxicity. The hyperthermia experiments showed effectiveness in temperature rise and cancer cell death. IO-250 NPs showed promising MRI with relaxivity r(2)* as high as 617.5 s(-1) mM(-1) Fe. In vivo MRI showed excellent tumor imaging.

CONCLUSION

The IO-250 NPs have great potential to be applied for clinical MRI and magnetic thermotherapy.

Nanomaterials: applications in cancer imaging and therapy

The application of nanomaterials (NMs) in biomedicine is increasing rapidly and offers excellent prospects for the development of new non-invasive strategies for the diagnosis and treatment of cancer. In this review, we provide a brief description of cancer pathology and the characteristics that are important for tumor-targeted NM design, followed by an overview of the different types of NMs explored to date, covering synthetic aspects and approaches explored for their application in unimodal and multimodal imaging, diagnosis and therapy. Significant synthetic advances now allow for the preparation of NMs with highly controlled geometry, surface charge, physicochemical properties, and the decoration of their surfaces with polymers and bioactive molecules in order to improve biocompatibility and to achieve active targeting. This is stimulating the development of a diverse range of nanometer-sized objects that can recognize cancer tissue, enabling visualization of tumors, delivery of anti-cancer drugs and/or the destruction of tumors by different therapeutic techniques.

Doxorubicin loaded magnetic polymersomes: theranostic nanocarriers for MR imaging and magneto-chemotherapy

Hydrophobically modified maghemite (γ-Fe(2)O(3)) nanoparticles were encapsulated within the membrane of poly(trimethylene carbonate)-b-poly(l-glutamic acid) (PTMC-b-PGA) block copolymer vesicles using a nanoprecipitation process. This formation method gives simple access to highly magnetic nanoparticles (MNPs) (loaded up to 70 wt %) together with good control over the vesicles size (100-400 nm). The simultaneous loading of maghemite nanoparticles and doxorubicin was also achieved by nanoprecipitation. The deformation of the vesicle membrane under an applied magnetic field has been evidenced by small angle neutron scattering. These superparamagnetic hybrid self-assemblies display enhanced contrast properties that open potential applications for magnetic resonance imaging. They can also be guided in a magnetic field gradient. The feasibility of controlled drug release by radio frequency magnetic hyperthermia was demonstrated in the case of encapsulated doxorubicin molecules, showing the viability of the concept of magneto-chemotherapy. These magnetic polymersomes can be used as efficient multifunctional nanocarriers for combined therapy and imaging.

Bilayer heating in magnetite nanoparticle-liposome dispersions via fluorescence anisotropy

Temperature measurements have been made within magnetite (Fe(3)O(4)) nanoparticle-liposome dispersions subjected to electromagnetic field at radiofrequency (RF) heating based on the fluorescence anisotropy of diphenylhexatriene (DPH) embedded within the bilayer. Incorporating cholesterol within dipalmitoylphosphatidylcholine (DPPC) bilayers broadened the anisotropy window associated with lipid melting. Cryogenic transmission electron microscopy showed that the dispersions contained magnetoliposomes with nanoparticle aggregates at both low and high encapsulation densities. RF heating results demonstrated the ability to measure the temperature of the ML bilayer with on/off RF cycles using DPH anisotropy. These measurements reflected the temperature of the bulk aqueous phase, which is consistent with previous work showing rapid heat dissipation from a nanoparticle surface during RF heating and a negligible difference between surface and bulk temperature.

Recent trends in the tuning of polymersomes' membrane properties

"Polymersomes" are vesicular structures made from the self-assembly of block copolymers. Such structures present outstanding interest for different applications such as micro- or nano-reactor, drug release or can simply be used as tool for understanding basic biological mechanisms. The use of polymersomes in such applications is strongly related to the way their membrane properties are controlled and tuned either by a precise molecular design of the constituting block or by addition of specific components inside the membrane (formulation approaches). Typical membrane properties of polymersomes obtained from the self-assembly of "coil coil" block copolymer since the end of the nineties will be first briefly reviewed and compared to those of their lipidic analogues, named liposomes. Therefore the different approaches able to modulate their permeability, mechanical properties or ability to release loaded drugs, using macromolecular engineering or formulations, are detailed. To conclude, the most recent advances to modulate the polymersomes' properties and systems that appear very promising especially for biomedical application or for the development of complex and bio-mimetic structures are presented.

Three-dimensional tracking and temporal analysis of liposomal transport in live cells using bright-field imaging

Gold nanoparticles (AuNPs) confined in liposomes of diameters around 200 nm produce strong scattering signal owing to surface plasmon resonance, and therefore bright-field optical tracking of the AuNP-encapsulating liposomes can be conducted in living cells. Using an optical profiling technique called noninterferometric wide-field optical profilometry and a bright-field tracking algorithm, the polynomial-fit Gaussian weight method, we analyze three-dimensional (3D) motion of such liposomes in living fibroblasts. The positioning accuracy in three dimensions is nearly 20 nm. We tag the liposome membranes with fibroblast growth factor-1 and reveal the intracellular transportation processes toward or away from the nucleus. On the basis of a temporal analysis of the intracellular 3D trajectories of AuNP-encapsulating liposomes, we identify directed and diffusive motions in the transportation processes.

Controlled release from bilayer-decorated magnetoliposomes via electromagnetic heating

Nanoscale assemblies that can be activated and controlled through external stimuli represent a next stage in multifunctional therapeutics. We report the formation, characterization, and release properties of bilayer-decorated magnetoliposomes (dMLs) that were prepared by embedding small hydrophobic SPIO nanoparticles at different lipid molecule to nanoparticle ratios within dipalmitoylphosphatidylcholine (DPPC) bilayers. The dML structure was examined by cryogenic transmission electron microscopy and differential scanning calorimetry, and release was examined by carboxyfluorescein leakage. Nanoparticle heating using alternating current electromagnetic fields (EMFs) operating at radio frequencies provided selective release of the encapsulated molecule at low nanoparticle concentrations and under physiologically acceptable EMF conditions. Without radio frequency heating, spontaneous leakage from the dMLs decreased with increasing nanoparticle loading, consistent with greater bilayer stability and a decrease in the effective dML surface area due to aggregation. With radio frequency heating, the initial rate and extent of leakage increased significantly as a function of nanoparticle loading and electromagnetic field strength. The mechanism of release is attributed to a combination of bilayer permeabilization and partial dML rupture.

Fine-tuning the surface functionality of aqueous luminescent nanocrystals through surfactant bilayer modification

We report a two-step phase transfer approach to locate surfactant bilayers on water-soluble luminescent nanocrystals (NCs), through which the surface functionality of the NCs is tunable. Since the species of both inner and outer surfactants of the bilayer are alterable in wide range, the current effort provides a facile approach to anchor various functional groups on aqueous NCs. The primary results indicate that these bilayer-modified NCs are able to be incorporated with various organic and inorganic materials.

The role of interparticle and external forces in nanoparticle assembly

The past 20 years have witnessed simultaneous multidisciplinary explosions in experimental techniques for synthesizing new materials, measuring and manipulating nanoscale structures, understanding biological processes at the nanoscale, and carrying out large-scale computations of many-atom and complex macromolecular systems. These advances have led to the new disciplines of nanoscience and nanoengineering. For reasons that are discussed here, most nanoparticles do not 'self-assemble' into their thermodynamically lowest energy state, and require an input of energy or external forces to 'direct' them into particular structures or assemblies. We discuss why and how a combination of self- and directed-assembly processes, involving interparticle and externally applied forces, can be applied to produce desired nanostructured materials.