Plasmon ruler with angstrom length resolution

Kinetics and dynamics of atomic-layer dissolution on low-defect Ag

Electrochemical metal dissolution reaction is a fundamental process in various critical technologies, including metal anode batteries and nanofabrication. However, experimentally revealing the kinetics and dynamics of active sites of metal dissolution reactions is challenging. Herein, we investigate metal dissolution on near-perfect single-crystal surfaces of Ag within regions of a few hundred nanometers isolated by scanning electrochemical cell microscopy (SECCM). Potential oscillation is observed under constant current conditions for dissolution. The one-to-one correspondence between the dissolution charge and the geometry of the dissolution pit from colocalized imaging allows ambiguous correlation, which suggests that each oscillation cycle corresponds to the dissolution of one atomic layer. The oscillation behavior is further explained in a kinetic model, which reveals that the oscillation comes from the dynamic evolution of the number of different active sites as the dissolution progresses on each atomic layer. In addition to the fundamental interest, the ability to observe layer-by-layer dissolution in electrochemical measurements suggests a potential pathway for developing electrochemical atomic layer etching for fabricating structures and devices with atomic precision.

Boosting Light-Matter Interactions in Plasmonic Nanogaps

Plasmonic nanogaps in strongly coupled metal nanostructures can confine light to nanoscale regions, leading to huge electric field enhancement. This unique capability makes plasmonic nanogaps powerful platforms for boosting light-matter interactions, thereby enabling the rapid development of novel phenomena and applications. This review traces the progress of nanogap systems characterized by well-defined morphologies, controllable optical responses, and a focus on achieving extreme performance. The properties of plasmonic gap modes in far-field resonance and near-field enhancement are explored and a detailed comparative analysis of nanogap fabrication techniques down to sub-nanometer scales is provided, including bottom-up, top-down, and their combined approaches. Additionally, recent advancements and applications across various frontier research areas are highlighted, including surface-enhanced spectroscopy, plasmon-exciton strong coupling, nonlinear optics, optoelectronic devices, and other applications beyond photonics. Finally, the challenges and promising emerging directions in the field are discussed, such as light-driven atomic effects, molecular optomechanics, and alternative new materials.

Versatile effects of galectin-1 protein-containing lipid bilayer coating for cardiovascular applications

Modulating inflammatory cells in an implantation site leads to severe complications and still unsolved challenges for blood-contacting medical devices. Inspired by the role of galectin-1 (Gal-1) in selective functions on multiple cells and immunomodulatory processes, we prepared a biologically target-specific surface coated with the lipid bilayer containing Gal-1 (Gal-1-SLB) and investigate the proof of the biological effects. First, lipoamido-dPEG-acid was deposited on a gold-coated substrate to form a self-assembled monolayer and then conjugated dioleoylphosphatidylethanolamine (DOPE) onto that to produce a lower leaflet of the supported lipid bilayer (SLB) before fusing membrane-derived vesicles extracted from B16-F10 cells. The Gal-1-SLB showed the expected anti-fouling activity by revealing the resistance to protein adsorption and bacterial adhesion. In vitro studies showed that the Gal-1-SLB can promote endothelial function and inhibit smooth muscle cell proliferation. Moreover, Gal-1- SLB presents potential function for endothelial cell migration and angiogenic activities. In vitro macrophage culture studies showed that the Gal-1-SLB attenuated the LPS-induced inflammation and the production of macrophage-secreted inflammatory cytokines. Finally, the implanted Gal-1-SLB reduced the infiltration of immune cells at the tissue-implant interface and increased markers for M2 polarization and blood vessel formation in vivo. This straightforward surface coating with Gal-1 can be a useful strategy for modulating the vascular and immune cells around a blood-contacting device.

Picometer Scale Photothermal Tuning of Plasmonic Nanocavities and Interfacial Processes

The ability to precisely tune plasmon resonances is critical for advancing nanophotonic and sensing technologies. In this work, we exploit the photothermal effect to achieve picometer-level tunability of plasmon resonances in nanorod-on-mirror nanocavities, using polyelectrolyte (PE) layers as dielectric spacers. The plasmon-induced thermal response of these soft materials allows real-time adjustment of the nanocavity, unlike stable inorganic spacers like aluminum oxide. Under continuous laser illumination, the PE spacers undergo thickness reduction and phase transitions, leading to significant shifts in plasmon resonances. These shifts are influenced by laser power and initial spacer thickness, which govern near-field enhancement and photothermal effects. It is shown that this precise tuning capability enables the exploration of various photophysical processes, including the excitation of higher-order plasmon modes, optomechanical enhancement of surface-enhanced Raman scattering signals, electron tunneling, molecular diffusion from the nanocavities, and the transition to charge transfer plasmons.

Liquid-metal-based microfluidic nanoplasmonic platform for point-of-care naked-eye antibody detection

Despite high sensitivity of nanoparticle-on-mirror cavities, a crucial branch of plasmonic nanomaterials, complex preparation and readout processes limit their extensive application in biosensing. Alternatively, liquid metals (LMs) combining fluidity and excellent plasmonic characteristics have become potential candidates for constructing plasmonic nanostructures. Herein, we propose a microfluidic-integration strategy to construct LM-based immunoassay platform, enabling LM-based nanoplasmonic sensors to be used for point-of-care (POC) clinical biomarker detection. Flowable LM is introduced onto protein-coated Au nanoparticle monolayer to form a "mirror-on-nanoparticle" nanostructure, simplifying the fabrication process in the conventional nanoparticle-on-mirror cavities. When antibodies were captured by antigens coated on the Au nanoparticle monolayer, devices respond both thickness and refractive index change of biomolecular layers, outputting naked-eye readable signals with high sensitivity (limit of detection: ∼ 604 fM) and a broad dynamic range (6 orders). This new assay, which generates quantitative results in 30 min, allows for high-throughput, smartphone-based detection of SARS-CoV-2 antibodies against multiple variants in clinical serum or blood samples. These results establish an advanced avenue for POC testing with LM materials, and demonstrate its potential to facilitate diagnostics, surveillance and prevalence studies for various infectious diseases.

Agglomeration compaction promotes corrosion of gold nanoparticles

Engineered nanoparticles are increasingly being used in various areas of human activity. However, the degradation mechanism of nanobodies in harsh environments is still a puzzle for theory and experiment. We report here the results of optical spectroscopy and nanoparticle tracking analysis, quantifying agglomeration and sizing of 50 nm citrate stabilized gold nanoparticles (GNPs) in HCl solutions containing H2O2. The mechanism of a consecutive corrosion reaction of GNPs is discussed within the framework of the near-field approach. We found that the disappearance of single nanoparticles from a suspension does not occur due to their dissolution per se, but is a consequence of the formation of aggregates. The neutralization of electrostatic shielding at high ionic strength allows gold nanoparticles to approach the subnanometer distance within the region of capping defects, at which the Casimir and van der Waals attractive forces dominate. It is suggested that electric field fluctuations in the confined space between highly conductive gold nanoparticles cause complexant-stimulated loss of metal from the core in the contact area. Going beyond the charge screening limitations by constraining the reaction space and reducing the double electrical layer thickness allows for chemical processes flow along otherwise not accessible reaction pathways.

Two-color interferometric scattering (iSCAT) microscopy reveals structural dynamics in discrete plasmonic molecules

Plasmonic molecules are discrete assemblies of noble metal nanoparticles (NPs) that are of interest as transducers in optical nanosensors. So far, NPs with diameters of ∼40 nm have been the preferred building blocks for plasmonic molecules intended as optical single molecule sensors due to difficulties associated with detecting smaller NPs through elastic scattering in conventional darkfield microscopy. Here, we apply 405 nm, 445 nm two-color interferometric scattering (iSCAT) microscopy to characterize polyethylene glycol (PEG) tethered dimers of 10 nm and 20 nm Ag NPs and their monomers. Dimers of both NP sizes can be discerned from their respective monomers through changes in the average iSCAT contrast. In the case of 20 nm Ag NPs, dimer formation induces a change in the sign of the iSCAT contrast, providing a characteristic signal for detecting binding events. 20 nm Ag NP dimers with 0.4 kDa and 3.4 kDa polyethylene glycol (PEG) spacers show iSCAT contrast distributions with significantly different averages on both wavelength channels. The iSCAT contrast measured for individual PEG-tethered 10 nm or 20 nm NP dimers as a function of time shows contrast fluctuations indicative of a rich structural dynamics in the assembled plasmonic molecules, which provides an additional metric to discern dimers from monomers and paves the path to a new class of interferometric plasmon rulers.

Influence of Quadrupolar Molecular Transitions within Plasmonic Cavities

Optical nanocavities have revolutionized the manipulation of radiative properties of molecular and semiconductor emitters. Here, we investigate the amplified photoluminescence arising from exciting a dark transition of β-carotene molecules embedded within plasmonic nanocavities. Integrating a molecular monolayer into nanoparticle-on-mirror nanostructures unveils enhancements surpassing 4 orders of magnitude in the initially light-forbidden excitation. Such pronounced enhancements transcend conventional dipolar mechanisms, underscoring the presence of alternative enhancement pathways. Notably, Fourier-plane scattering spectroscopy shows that the photoluminescence excitation resonance aligns with a higher-order plasmonic cavity mode, which supports strong field gradients. Combining quantum chemistry calculations with electromagnetic simulations reveals an important interplay between the Franck-Condon quadrupole and Herzberg-Teller dipole contributions in governing the absorption characteristics of this dark transition. In contrast to free space, the quadrupole moment plays a significant role in photoluminescence enhancement within nanoparticle-on-mirror cavities. These findings provide an approach to access optically inactive transitions, promising advancements in spectroscopy and sensing applications.

Multifunctional DNA scaffold mediated gap plasmon resonance: Application to sensitive PD-L1 sensor

The introduction of noble metal nanoparticles with good LSPR characteristics can greatly improve the sensitivity of SPR through resonance coupling effect. The plasma resonance response and optical properties of film coupling nanoparticle systems largely depends on the ingenious design of gap structures. Nucleic acid nanostructures have good stability, flexibility, and high biocompatibility, making them ideal materials for gap construction. 2D MOF (Cu-Tcpp) has a large conjugated surface similar to graphene, which can provide a stable substrate for the directional fixation of nucleic acid nanostructures. However, research on gap coupling plasmon based on nucleic acid nanostructures and 2D MOF is still rarely reported. By integrating the advantages of Cu-Tcpp assembled film and DNA tetrahedron immobilization, a nano gap with porous scaffold structure between the gold film and gold nanorod was build. The rigidity of DNA tetrahedron can precisely control the gap size, and its unique programmability allows us to give the coupling structure greater flexibility through the design of nucleic acid chain. The experimental results and FDTD simulation show that the film coupling nanoparticle systems constructed with DNA tetrahedrons greatly enhance the electric field strength near the chip surface and effectively improve the sensitivity of SPR. This research shows the huge potential of nucleic acid nanomaterials in the construction of SPR chip surface microstructures.

Plasmonic and Photothermal Properties of Silica-Capped Gold Nanoparticle Aggregates

Owing to their biocompatibility, gold nanoparticles have many applications in healthcare, notably for targeted drug delivery and the photothermal therapy of tumors. The addition of a silica shell to the nanoparticles can help to minimize the aggregation of the nanoparticles upon exposure to harsh environments and protect any Raman reporters adsorbed onto the metal surface. Here, we report the effects of the addition of a silica shell on the photothermal properties of a series of gold nanostructures, including gold nanoparticle aggregates. The presence of a Raman reporter at the surface of the gold nanoparticles also allows the structures to be evaluated by surface-enhanced Raman scattering (SERS). In this work, we explore the relationship between the degree of aggregation and the position and the extinction of the near-infrared plasmon on the observed SERS intensity and in the increase in bulk temperature upon near-infrared excitation. By tailoring the concentration of the silane and the thickness of the silica shell, it is possible to improve the photothermal heating capabilities of the structures without sacrificing the SERS intensity or changing the optical properties of the gold nanoparticle aggregates.

Naked-Eye Readable Microarray for Rapid Profiling of Antibodies against Multiple SARS-CoV-2 Variants

Novel high-throughput protein detection technologies are critically needed for population-based large-scale SARS-CoV-2 antibody detection as well as for monitoring quality and duration of immunity against virus variants. Current protein microarray techniques rely heavily on labeled transduction methods that require sophisticated instruments and complex operations, limiting their clinical potential, particularly for point-of-care (POC) applications. Here, we developed a label-free and naked-eye readable microarray (NRM) based on a thickness-sensing plasmon ruler, enabling antibody profiling within 30 min. The NRM chips provide 100% accuracy for neutralizing antibody detection by efficiently screening antigen types and experimental conditions and allow for the profiling of antibodies against multiple SARS-CoV-2 variants in clinical samples. We further established a flexible "barcode" NRM assay with a simple tape-based operation, enabling an effective smartphone-based readout and analysis. These results demonstrate new strategies for high-throughput protein detection and highlight the potential of novel protein microarray techniques for realistic clinical applications.

Hyperbolic Polaritonic Rulers Based on van der Waals α-MoO3 Waveguides and Resonators

Low-dimensional, strongly anisotropic nanomaterials can support hyperbolic phonon polaritons, which feature strong light-matter interactions that can enhance their capabilities in sensing and metrology tasks. In this work, we report hyperbolic polaritonic rulers, based on microscale α-phase molybdenum trioxide (α-MoO3) waveguides and resonators suspended over an ultraflat gold substrate, which exhibit near-field polaritonic characteristics that are exceptionally sensitive to device geometry. Using scanning near-field optical microscopy, we show that these systems support strongly confined image polariton modes that exhibit ideal antisymmetric gap polariton dispersion, which is highly sensitive to air gap dimensions and can be described and predicted using a simple analytic model. Dielectric constants used for modeling are accurately extracted using near-field optical measurements of α-MoO3 waveguides in contact with the gold substrate. We also find that for nanoscale resonators supporting in-plane Fabry-Perot modes, the mode order strongly depends on the air gap dimension in a manner that enables a simple readout of the gap dimension with nanometer precision.

Fabricating defogging metasurfaces via a water-based colloidal route

Metamaterials possess exotic properties that do not occur in nature and have attracted significant attention in research and engineering. Two decades ago, the field of metamaterials emerged from linear electromagnetism, and today it encompasses a wide range of aspects related to solid matter, including electromagnetic and optical, mechanical and acoustic, as well as unusual thermal or mass transport phenomena. Combining different material properties can lead to emergent synergistic functions applicable in everyday life. Nevertheless, making such metamaterials in a robust, facile, and scalable manner is still challenging. This paper presents an effective protocol allowing for metasurfaces offering a synergy between optical and thermal properties. It utilizes liquid crystalline suspensions of nanosheets comprising two transparent silicate monolayers in a double stack, where gold nanoparticles are sandwiched between the two silicate monolayers. The colloidally stable suspension of nanosheets was applied in nanometre-thick coatings onto various substrates. The transparent coatings serve as absorbers in the infrared spectrum allowing for the efficient conversion of sunlight into heat. The peculiar metasurface couples plasmon-enhanced adsorption with anisotropic heat conduction in the plane of the coating, both at the nanoscale. Processing of the coating is based on scalable and affordable wet colloidal processing instead of having to apply physical deposition in high vacuum or lithographic techniques. Upon solar irradiation, the colloidal metasurface is quickly (60% of the time taken for the non-coated glass) heated to the level where complete defogging is assured without sacrificing transparency in the visible range. The protocol is generally applicable allowing for intercalation of any nanoparticles covering a range of physical properties that are then inherited to colloidal nanosheets. Because of their large aspect ratio, the nanosheets will inevitably orient parallel to any surface. This will allow for a toolbox capable of mimicking metamaterial properties while assuring facile processing via dip coating or spray coating.

Plasmon Hybridizations in Compound Nanorod-Nanohole Arrays

This study shows that a hybridized plasmonic mode, represented by an additional transmission peak, in a compound structure consisting of a nanorod embedded in a nanohole can be effectively described as a quasi-dipole oscillator. When two nanorods are introduced into a nanohole, these two quasi-dipoles can couple and hybridize, giving rise to two additional transmission peaks in the enhanced optical transmission spectrum. The relative intensities of these peaks can be controlled by adjusting the incident polarization, while their separations can be tuned by modifying the length of the nanorods. The concept of quasi-dipoles in compound nanohole structures can be further extended to predict the coupling behavior of even more complex compound configurations, such as multiple nanorods within nanoholes, resulting in the generation of multiple hybridization states. Consequently, the shape and response of the transmission peaks can be precisely engineered. This strategy could be used to design nanohole-based metasurfaces for applications such as ultra-thin optical filters, waveplates, polarizers, etc.

Tunable Subnanometer Gaps in Self-Assembled Monolayer Gold Nanoparticle Superlattices Enabling Strong Plasmonic Field Confinement

Nanoparticle superlattices produced with controllable interparticle gap distances down to the subnanometer range are of superior significance for applications in electronic and plasmonic devices as well as in optical metasurfaces. In this work, a method to fabricate large-area (∼1 cm²) gold nanoparticle (GNP) superlattices with a typical size of single domains at several micrometers and high-density nanogaps of tunable distances (from 2.3 to 0.1 nm) as well as variable constituents (from organothiols to inorganic S^2-) is demonstrated. Our approach is based on the combination of interfacial nanoparticle self-assembly, subphase exchange, and free-floating ligand exchange. Electrical transport measurements on our GNP superlattices reveal variations in the nanogap conductance of more than 6 orders of magnitude. Meanwhile, nanoscopic modifications in the surface potential landscape of active GNP devices have been observed following engineered nanogaps. In situ optical reflectance measurements during free-floating ligand exchange show a gradual enhancement of plasmonic capacitive coupling with a diminishing average interparticle gap distance down to 0.1 nm, as continuously red-shifted localized surface plasmon resonances with increasing intensity have been observed. Optical metasurfaces consisting of such GNP superlattices exhibit tunable effective refractive index over a broad wavelength range. Maximal real part of the effective refractive index, n_max, reaching 5.4 is obtained as a result of the extreme field confinement in the high-density subnanometer plasmonic gaps.

Nanoparticle Imprint Lithography: From Nanoscale Metrology to Printable Metallic Grids

Large scale and low-cost nanopatterning of materials is of tremendous interest for optoelectronic devices. Nanoimprint lithography has emerged in recent years as a nanofabrication strategy that is high-throughput and has a resolution comparable to that of electron-beam lithography (EBL). It is enabled by pattern replication of an EBL master into polydimethylsiloxane (PDMS), that is then used to pattern a resist for further processing, or a sol-gel that could be calcinated into a solid material. Although the sol-gel chemistry offers a wide spectrum of material compositions, metals are still difficult to achieve. This gap could be bridged by using colloidal nanoparticles as resist, but deep understanding of the key parameters is still lacking. Here, we use supported metallic nanocubes as a model resist to gain fundamental insights into nanoparticle imprinting. We uncover the major role played by the surfactant layer trapped between nanocubes and substrate, and measure its thickness with subnanometer resolution by using gap plasmon spectroscopy as a metrology platform. This enables us to quantify the van der Waals (VDW) interactions responsible for the friction opposing the nanocube motion, and we find that these are almost in quantitative agreement with the Stokes drag acting on the nanocubes during nanoimprint, that is estimated with a simplified fluid mechanics model. These results reveal that a minimum thickness of surfactant is required, acting as a spacer layer mitigating van der Waals forces between nanocubes and the substrate. In the light of these findings we propose a general method for resist preparation to achieve optimal nanoparticle mobility and show the assembly of printable Ag and Au nanocube grids, that could enable the fabrication of low-cost transparent electrodes of high material quality upon nanocube epitaxy.

Extending Plasmonic Enhancement Limit with Blocked Electron Tunneling by Monolayer Hexagonal Boron Nitride

Fabricating ultrasmall nanogaps for significant electromagnetic enhancement is a long-standing goal of surface-enhanced Raman scattering (SERS) research. However, such electromagnetic enhancement is limited by quantum plasmonics as the gap size decreases below the quantum tunneling regime. Here, hexagonal boron nitride (h-BN) is sandwiched as a gap spacer in a nanoparticle-on-mirror (NPoM) structure, effectively blocking electron tunneling. Layer-dependent scattering spectra and theoretical modeling confirm that the electron tunneling effect is screened by monolayer h-BN in a nanocavity. The layer-dependent SERS enhancement factor of h-BN in the NPoM system monotonically increases as the number of layers decreases, which agrees with the prediction by the classical electromagnetic model but not the quantum-corrected model. The ultimate plasmonic enhancement limits are extended in the classical framework in a single-atom-layer gap. These results provide deep insights into the quantum mechanical effects in plasmonic systems, enabling the potential novel applications based on quantum plasmonic.

Learning and Predicting Photonic Responses of Plasmonic Nanoparticle Assemblies via Dual Variational Autoencoders

The application of machine learning is demonstrated for rapid and accurate extraction of plasmonic particles cluster geometries from hyperspectral image data via a dual variational autoencoder (dual-VAE). In this approach, the information is shared between the latent spaces of two VAEs acting on the particle shape data and spectral data, respectively, but enforcing a common encoding on the shape-spectra pairs. It is shown that this approach can establish the relationship between the geometric characteristics of nanoparticles and their far-field photonic responses, demonstrating that hyperspectral darkfield microscopy can be used to accurately predict the geometry (number of particles, arrangement) of a multiparticle assemblies below the diffraction limit in an automated fashion with high fidelity (for monomers (0.96), dimers (0.86), and trimers (0.58). This approach of building structure-property relationships via shared encoding is universal and should have applications to a broader range of materials science and physics problems in imaging of both molecular and nanomaterial systems.

Fano asymmetry in zero-detuned exciton-plasmon systems

Plasmonic resonances in metallic nanostructures can strongly enhance the emission from quantum emitters, as commonly used in surface-enhanced spectroscopy techniques. The extinction and scattering spectrum of these quantum emitter-metallic nanoantenna hybrid systems are often characterized by a sharp Fano resonance, which is usually expected to be symmetric when a plasmonic mode is resonant with an exciton of the quantum emitter. Here, motivated by recent experimental work showing an asymmetric Fano lineshape under resonant conditions, we study the Fano resonance found in a system composed of a single quantum emitter interacting resonantly with a single spherical silver nanoantenna or with a dimer nanoantenna composed of two gold spherical nanoparticles. To analyze in detail the origin of the resulting Fano asymmetry we develop numerical simulations, an analytical expression that relates the asymmetry of the Fano lineshape to the field enhancement and to the enhanced losses of the quantum emitter (Purcell effect), and a set of simple models. In this manner we identify the contributions to the asymmetry of different physical phenomena, such as retardation and the direct excitation and emission from the quantum emitter.

DNA-Programed Plasmon Rulers Decrypt Single-Receptor Dimerization on Cell Membrane

Decrypting the dynamics of receptor dimerization on cell membranes bears great importance in identifying the mechanisms regulating diverse cellular activities. In this regard, long-term monitoring of single-molecule behavior during receptor dimerization allows deepening insight into the dimerization process and tracking of the behavior of individual receptors, yet this remains to be realized. Herein, real-time observation of the receptor tyrosine kinases family (RTKs) at single-molecule level based on plasmon rulers was achieved for the first time, which enabled precise regulation and dynamic monitoring of the dimerization process by DNA programming with excellent photostability. Additionally, those nanoprobes demonstrated substantial application in the regulation of RTKs protein dimerization/phosphorylation and activation of downstream signaling pathways. The proposed nanoprobes hold considerable potential for elucidating the molecular mechanisms of single-receptor dimerization as well as the conformational transitions upon dimerization, providing a new paradigm for the precise manipulation and monitoring of specific single-receptor crosslink events in biological systems.

Multiarray Biosensor for Diagnosing Lung Cancer Based on Gap Plasmonic Color Films

Adaptable and sensitive materials are essential for the development of advanced sensor systems such as bio and chemical sensors. Biomaterials can be used to develop multifunctional biosensor applications using genetic engineering. In particular, a plasmonic sensor system using a coupled film nanostructure with tunable gap sizes is a potential candidate in optical sensors because of its simple fabrication, stability, extensive tuning range, and sensitivity to small changes. Although this system has shown a good ability to eliminate humidity as an interferant, its performance in real-world environments is limited by low selectivity. To overcome these issues, we demonstrated the rapid response of gap plasmonic color sensors by utilizing metal nanostructures combined with genetically engineered M13 bacteriophages to detect volatile organic compounds (VOCs) and diagnose lung cancer from breath samples. The M13 bacteriophage was chosen as a recognition element because the structural protein capsid can readily be modified to target the desired analyte. Consequently, the VOCs from various functional groups were distinguished by using a multiarray biosensor based on a gap plasmonic color film observed by hierarchical cluster analysis. Furthermore, the lung cancer breath samples collected from 70 healthy participants and 50 lung cancer patients were successfully classified with a high rate of over 89% through supporting machine learning analysis.

Thickness-Sensing Sandwiched Plasmonic Biosensors Enable Label-Free Naked-Eye Antibody Quantification

Clinical serology assays for detecting the antibodies of the virus are time-consuming, are less sensitive/selective, or rely on sophisticated detection instruments. Here, we develop a sandwiched plasmonic biosensor (SPB) for supersensitive thickness-sensing via utilizing the distance-dependent electromagnetic coupling in sandwiched plasmonic nanostructures. SPBs quantitatively amplify the thickness changes on the nanoscale range (sensitivity: ∼2% nm^-1) into macroscopically visible signals, thereby enabling the rapid, label-free, and naked-eye detection of targeted biomolecular species (via the thickness change caused by immunobinding events). As a proof of concept, this assay affords a broad dynamic range (7 orders of magnitude) and a low LOD (∼0.3 pM), allowing for the extremely accurate SARS-CoV-2 antibody quantification (sensitivity/specificity: 100%/∼99%, with a portable optical fiber device). This strategy is suitable for high-throughput multiplexed detection and smartphone-based sensing at the point-of-care, which can be expanded for various sensing applications beyond the fields of viral infections and vaccination.

Multiband tunable exciton-induced transparencies: Exploiting both strong and intermediate coupling in a nanocube-hexagonal-nanoplate heterodimer J-aggregates hybrid

Understanding and mastering the light-light and light-matter interactions in coupled structures have become significant subjects, as they provide versatile tools for manipulating light in both classical and quantum regimes. Mimicking quantum interference effects in pure photonic nanostructures, from weak Fano dip to intense electromagnetically induced transparency, usually requires strong asymmetries in complex geometries and larger interactions between resonances, i.e., in the intermediate coupling regime. Here, we numerically demonstrate a simple and chemically feasible plasmonic nanocube-hexagonal-nanoplate heterodimer with a strong, tunable self-induced transparency window created by the intermediate coupling between the near-degenerate dark and bright hybridized modes. Further assisted by the strong coupling introduced by the J-aggregate excitons covering the heterodimer, three evident exciton-induced transparency windows were observed. These multiband transparencies in a single-particle-level subwavelength configuration, could on one hand enrich the toolbox of multi-frequency light filtering, slowing and switching beyond the diffraction limit, and on the other hand, work as a fundamental testbed for investigating multiscale light-matter interactions at the nanoscale.

Size characterization of plasmonic nanoparticles with dark-field single particle spectrophotometry

Plasmonic nanoparticles are widely used in multiple scientific and industrial applications. Although many synthesis methods have been reported in the literature throughout the last decade, controlling the size and shape of large populations still remains as a challenge. As size and shape variations have a strong impact in their plasmonic properties, the need to have metrological techniques to accurately characterize their morphological features is peremptory. We present a new optical method referred as Dark-Field Single Particle Spectrophotometry which is able to measure the individual sizes of thousands of particles with nanometric accuracy in just a couple of minutes. Our method also features an easy sample preparation, a straightforward experimental setup inspired on a customized optical microscope, and a measurement protocol simple enough to be carried out by untrained technicians. As a proof of concept, thousands of spherical nanoparticles of different sizes have been measured, and after a direct comparison with metrological gold standard electron microscopy, a discrepancy of 3% has been attested. Although its feasibility has been demonstrated on spherical nanoparticles, the true strengthness of the method is that it can be generalized also to nanoparticles with arbitrary shapes and geometries, thus representing an advantageous alternative to the gold-standard electron microscopy.

Menezes L, Tittl A, Ren H, Maier SA. Optical Metasurfaces for Energy Conversion

Nanostructured surfaces with designed optical functionalities, such as metasurfaces, allow efficient harvesting of light at the nanoscale, enhancing light-matter interactions for a wide variety of material combinations. Exploiting light-driven matter excitations in these artificial materials opens up a new dimension in the conversion and management of energy at the nanoscale. In this review, we outline the impact, opportunities, applications, and challenges of optical metasurfaces in converting the energy of incoming photons into frequency-shifted photons, phonons, and energetic charge carriers. A myriad of opportunities await for the utilization of the converted energy. Here we cover the most pertinent aspects from a fundamental nanoscopic viewpoint all the way to applications.

Light Extinction by Agglomerates of Gold Nanoparticles: A Plasmon Ruler for Sub-10 nm Interparticle Distances

Plasmon rulers relate the shift of resonance wavelength, λ_l, of gold agglomerates to the average distance, s, between their constituent nanoparticles. These rulers are essential for monitoring the dynamics of biomolecules (e.g., proteins and DNA) by determining their small (<10 nm) coating thickness. However, existing rulers for dimers and chains estimate coating thicknesses smaller than 10 nm with rather large errors (more than 200%). Here, the light extinction of dimers, 7- and 15-mers of gold nanoparticles with diameter d_p = 20-80 nm and s = 1-50 nm is simulated. Such agglomerates shift λ_l up to 680 nm due to plasmonic coupling, in excellent agreement with experimental data by microscopy, dynamic light scattering, analytical centrifugation, and UV-visible spectroscopy. Subsequently, a new plasmon ruler is derived for gold nanoagglomerates that enables the accurate determination of sub-10 nm coating thicknesses, in excellent agreement also with tedious microscopy measurements.

Atomically Smooth Single-Crystalline Platform for Low-Loss Plasmonic Nanocavities

Nanoparticle-on-mirror plasmonic nanocavities, capable of extreme optical confinement and enhancement, have triggered state-of-the-art progress in nanophotonics and development of applications in enhanced spectroscopies. However, the optical quality factor and thus performance of these nanoconstructs are undermined by the granular polycrystalline metal films (especially when they are optically thin) used as a mirror. Here, we report an atomically smooth single-crystalline platform for low-loss nanocavities using chemically synthesized gold microflakes as a mirror. Nanocavities constructed using gold nanorods on such microflakes exhibit a rich structure of plasmonic modes, which are highly sensitive to the thickness of optically thin (down to ∼15 nm) microflakes. The microflakes endow nanocavities with significantly improved quality factor (∼2 times) and scattering intensity (∼3 times) compared with their counterparts based on deposited films. The developed low-loss nanocavities further allow for the integration with a mature platform of fiber optics, opening opportunities for realizing nanocavity-based miniaturized photonic devices for practical applications.

Switching plasmonic nanogaps between classical and quantum regimes with supramolecular interactions

In the realm of extreme nanophotonics, nanogap plasmons support reliable field enhancements up to 1000, which provide unique opportunities to access a single molecule for strong coupling and a single atom for quantum catalysis. The quantum plasmonics are intriguing but difficult to modulate largely because of the lack of proper spacers that can reversibly actuate the sub-1-nm gaps. Here, we demonstrate that supramolecular systems made of oligoamide sequences can reversibly switch the gap plasmons of Au nanoparticles on mirror between classical and quantum tunneling regimes via supramolecular interactions. The results reveal detailed plasmon shift near the quantum tunneling limit, which fits well with both classical- and quantum-corrected models. In the quantum tunneling regime, we demonstrate that plasmonic hot electron tunneling can further blue shift the quantum plasmons because of the increased conductance in the nanogaps, making it a promising prototype of optical tunable quantum plasmonic devices.

Quantum Plasmonics: Energy Transport Through Plasmonic Gap

At the interfaces of metal and dielectric materials, strong light-matter interactions excite surface plasmons; this allows electromagnetic field confinement and enhancement on the sub-wavelength scale. Such phenomena have attracted considerable interest in the field of exotic material-based nanophotonic research, with potential applications including nonlinear spectroscopies, information processing, single-molecule sensing, organic-molecule devices, and plasmon chemistry. These innovative plasmonics-based technologies can meet the ever-increasing demands for speed and capacity in nanoscale devices, offering ultrasensitive detection capabilities and low-power operations. Size scaling from the nanometer to sub-nanometer ranges is consistently researched; as a result, the quantum behavior of localized surface plasmons, as well as those of matter, nonlocality, and quantum electron tunneling is investigated using an innovative nanofabrication and chemical functionalization approach, thereby opening a new era of quantum plasmonics. This new field enables the ultimate miniaturization of photonic components and provides extreme limits on light-matter interactions, permitting energy transport across the extremely small plasmonic gap. In this review, a comprehensive overview of the recent developments of quantum plasmonic resonators with particular focus on novel materials is presented. By exploring the novel gap materials in quantum regime, the potential quantum technology applications are also searched for and mapped out.

Synthesis, Assembly, Optical Properties, and Sensing Applications of Plasmonic Gap Nanostructures

Plasmonic gap nanostructures (PGNs) have been extensively investigated mainly because of their strongly enhanced optical responses, which stem from the high intensity of the localized field in the nanogap. The recently developed methods for the preparation of versatile nanogap structures open new avenues for the exploration of unprecedented optical properties and development of sensing applications relying on the amplification of various optical signals. However, the reproducible and controlled preparation of highly uniform plasmonic nanogaps and the prediction, understanding, and control of their optical properties, especially for nanogaps in the nanometer or sub-nanometer range, remain challenging. This is because subtle changes in the nanogap significantly affect the plasmonic response and are of paramount importance to the desired optical performance and further applications. Here, recent advances in the synthesis, assembly, and fabrication strategies, prediction and control of optical properties, and sensing applications of PGNs are discussed, and perspectives toward addressing these challenging issues and the future research directions are presented.

Gap-Dependent Surface-Enhanced Raman Scattering (SERS) Enhancement Model of SERS Substrate-Probe Combination Using a Polyelectrolyte Nanodroplet as a Distance Controller

The development of surface-enhanced Raman scattering (SERS) biosensor platforms based on the sandwich combination of an SERS substrate and Raman reporter coated gold nanoparticle (AuNP) labeled with antibody has been widely performed for highly sensitive detection of biomolecules. The size of biomolecules located between these SERS-active materials dictates the sensitivity enhancement of the sensor. However, no suitable molecular size is provided. In this study, we report the gap-dependent SERS enhancement model using the combination of two SERS-active materials of 2D arrays of gold core-silver shell nanoparticles (Au@Ag core-shell NPs) as SERS-active substrates and mercaptobenzoic acid (MBA)-labeled AuNPs as SERS probes. The distance between these two materials is finely tuned using layer-by-layer assembled polyelectrolyte multilayer films. The morphology of the polyelectrolyte spacer is controlled into a droplet nanostructure, which is assumed to have a comparable shape with globular biomolecules. The well-controlled height or thickness of polyelectrolyte nanodroplet was achieved by changing number of deposition cycles. By increasing the thickness of the polyelectrolyte nanodroplet, MBA SERS intensities gradually decreased until at 40 nm-thick nanodroplet film and maintained afterward. This spacer thickness defined the limit of plasmonic coupling effect from this SERS probe-substrate combination. The SERS enhancement capability of this model was compared to conventional SERS immunoassay using three different antigen-antibody complex sizes of prostate-specific antigen, carcinoembryonic antigen, and carbohydrate antigen 19-9. Good agreement of the limitation of plasmon coupling as a function of the distance between the SERS substrate-probe combination using this developed model and SERS immunoassay was found. The finding provides valuable guidelines for immune-system selection in SERS immunosensors based on SERS substrate-probe combination.

Fabrication of plasmonic structures with well-controlled nanometric features: a comparison between lift-off and ion beam etching

After providing a detailed overview of nanofabrication techniques for plasmonics, we discuss in detail two different approaches for the fabrication of metallic nanostructures based on e-beam lithography. The first approach relies on a negative e-beam resist, followed by ion beam milling, while the second uses a positive e-beam resist and lift-off. Overall, ion beam etching provides smaller and more regular features including tiny gaps between sub-parts, that can be controlled down to about 10 nm. In the lift-off process, the metal atoms are deposited within the resist mask and can diffuse on the substrate, giving rise to the formation of nanoclusters that render the nanostructure outline slightly fuzzy. Scattering cross sections computed for both approaches highlight some spectral differences, which are especially visible for structures that support complex resonances, such as Fano resonances. Both techniques can produce useful nanostructures and the results reported therein should guide the researcher to choose the best suited approach for a given application, depending on the available technology.

Quantum surface-response of metals revealed by acoustic graphene plasmons

A quantitative understanding of the electromagnetic response of materials is essential for the precise engineering of maximal, versatile, and controllable light-matter interactions. Material surfaces, in particular, are prominent platforms for enhancing electromagnetic interactions and for tailoring chemical processes. However, at the deep nanoscale, the electromagnetic response of electron systems is significantly impacted by quantum surface-response at material interfaces, which is challenging to probe using standard optical techniques. Here, we show how ultraconfined acoustic graphene plasmons in graphene-dielectric-metal structures can be used to probe the quantum surface-response functions of nearby metals, here encoded through the so-called Feibelman d-parameters. Based on our theoretical formalism, we introduce a concrete proposal for experimentally inferring the low-frequency quantum response of metals from quantum shifts of the acoustic graphene plasmons dispersion, and demonstrate that the high field confinement of acoustic graphene plasmons can resolve intrinsically quantum mechanical electronic length-scales with subnanometer resolution. Our findings reveal a promising scheme to probe the quantum response of metals, and further suggest the utilization of acoustic graphene plasmons as plasmon rulers with ångström-scale accuracy.

Hybrid Approach to Fabricate Uniform and Active Molecular Junctions

Molecules can serve as ultimate building blocks for extreme nanoscale devices. This requires their precise integration into functional heterojunctions, most commonly in the form of metal-molecule-metal architectures. Structural damage and nonuniformities caused by current fabrication techniques, however, limit their effective incorporation. Here, we present a hybrid fabrication approach enabling uniform and active molecular junctions. A template-stripping technique is developed to form electrodes with sub-nanometer smooth surfaces. Combined with dielectrophoretic trapping of colloidal nanorods, uniform sub-5 nm junctions are achieved. Uniquely, in our design, the top contact is mechanically free to move under an applied stimulus. Using this, we investigate the electromechanical tuning of the junction and its tunneling conduction. Here, the molecules help control sub-nanometer mechanical modulation, which is conventionally challenging due to instabilities caused by surface adhesive forces. Our versatile approach provides a platform to develop and study active molecular junctions for emerging applications in electronics, plasmonics, and electromechanical devices.

Plasmonic Assemblies for Real-Time Single-Molecule Biosensing

Their tunable optical properties and versatile surface functionalization have sparked applications of plasmonic assemblies in the fields of biosensing, nonlinear optics, and photonics. Particularly, in the field of biosensing, rapid advances have occurred in the use of plasmonic assemblies for real-time single-molecule sensing. Compared to individual particles, the use of assemblies as sensors provides stronger signals, more control over the optical properties, and access to a broader range of timescales. In the past years, they have been used to directly reveal single-molecule interactions, mechanical properties, and conformational dynamics. This review summarizes the development of real-time single-molecule sensors built around plasmonic assemblies. First, a brief overview of their optical properties is given, and then recent applications are described. The current challenges in the field and suggestions to overcome those challenges are discussed in detail. Their stability, specificity, and sensitivity as sensors provide a complementary approach to other single-molecule techniques like force spectroscopy and single-molecule fluorescence. In future applications, the impact in real-time sensing on ultralong timescales (hours) and ultrashort timescales (sub-millisecond), time windows that are difficult to access using other techniques, is particularly foreseen.

Graphene Plasmon Resonances for Electrically-Tunable Sub-Femtometer Dimensional Resolution

A coupled graphene structure (CGS) is proposed to obtain an electrically tunable sub-femtometer (sub-fm) dimensional resolution. According to analytical and numerical investigations, the CGS can support two branches of localized surface plasmon resonances (LSPRs), which park at the dielectric spacer between two pieces of graphene. The coupled efficiencies of the odd-order modes are even four orders of magnitude higher than that of the even-order modes. In particular, a sub-fm resolution for detecting the change in the spacer thickness can be reached using the lowest order LSPR mode. The LSPR wavelength and the dimensional differential resolution can be electrically-tuned from 9.5 to 33 μm and from 4.3 to 15 nm/pm, respectively, by modifying the chemical potential of the graphene via the gate voltage. Furthermore, by replacing the graphene ribbon (GR) at the top of the CGS with multiple GRs of different widths, a resonant frequency comb in the absorption spectrum with a tunable frequency interval is generated, which can be used to detect the changes in spacer thicknesses at different locations with sub-fm resolution.

Phase imaging of transition from classical to quantum plasmonic couplings between a metal nanoparticle and a metal surface

When a metal nanoparticle is brought near to a metal surface within electron tunneling distance (∼1 nm), classical electromagnetic coupling between the nanoparticle and the metal is expected to transition to quantum coupling. We show that this transition can be observed as a drastic phase change in the surface plasmon resonance (SPR) images of the gold nanoparticles. We study the transition by controlling the distance between the nanoparticles and electrode surface, modeling the impact of the transition on the SPR image in terms of a phase shift and demonstrating detection of microRNA based on the transition from classical to quantum coupling. The work shows that the quantum coupling can be directly visualized in SPR, and the extremely sensitive dependence of the transition on distance leads to a biosensing principle with SPR.

Bright upconverted emission from light-induced inelastic tunneling

Upconverted light from nanostructured metal surfaces can be produced by harmonic generation and multi-photon luminescence; however, these are very weak processes and require extremely high field intensities to produce a measurable signal. Here we report on bright emission, 5 orders of magnitude greater than harmonic generation, that can be seen from metal tunnel junctions that we believe is due to light-induced inelastic tunneling emission. Like inelastic tunneling light emission, which was recently reported to have 2% conversion efficiency per tunneling event, the emission wavelength recorded varies with the local electric field applied; however, here the field is from a 1560 nm femtosecond pulsed laser source. Finite-difference time-domain simulations of the experimental conditions show the local field is sufficient to generate tunneling-based inelastic light emission in the visible regime. This phenomenon is promising for producing ultrafast upconverted light emission with higher efficiency than conventional nonlinear processes.

Linear scattering off a dynamically controlled nanosphere-mirror plasmonic antenna on a fiber taper

A quartz-tuning-fork shear-force microscope was used to demonstrate the gap size dependency of the resonance frequency for a nanosphere-mirror plasmonic antenna. The nanosphere was mounted at the end of a fiber taper scanning probe. A semi-transparent silicon film mirror was used to couple evanescent fields from incident light with the plasmonic antenna using an inverted optical microscope. The plasmon resonance spectra were acquired with a 0.4 nm-step gap size tuning resolution, and were confirmed by finite-difference time-domain simulations. The proposed technique provides a dynamic approach to tuning and detecting distance-dependent localized surface plasmon resonance with a sub-nanometer step resolution.

In Pursuit of Zero 2.0: Recent Developments in Nonfouling Polymer Brushes for Immunoassays

"Nonfouling" polymer brush surfaces can greatly improve the performance of in vitro diagnostic (IVD) assays due to the reduction of nonspecific protein adsorption and consequent improvement of signal-to-noise ratios. The development of synthetic polymer brush architectures that suppress adventitious protein adsorption is reviewed, and their integration into surface plasmon resonance and fluorescent sandwich immunoassay formats is discussed. Also, highlighted is a novel, self-contained immunoassay platform (the D4 assay) that transforms time-consuming laboratory-based assays into a user-friendly and point-of-care format with a sensitivity and specificity comparable or better than standard enzyme-linked immunosorbent assay (ELISA) directly from unprocessed samples. These advancements clearly demonstrate the utility of nonfouling polymer brushes as a substrate for ultrasensitive and robust diagnostic assays that may be suitable for clinical testing, in field and laboratory settings.

A DNA origami plasmonic sensor with environment-independent read-out

DNA origami is a promising technology for its reproducibility, flexibility, scalability and biocompatibility. Among the several potential applications, DNA origami has been proposed as a tool for drug delivery and as a contrast agent, since a conformational change upon specific target interaction may be used to release a drug or produce a physical signal, respectively. However, its conformation should be robust with respect to the properties of the medium in which either the recognition or the read-out take place, such as pressure, viscosity and any other unspecific interaction other than the desired target recognition. Here we report on the read-out robustness of a tetragonal DNA-origami/gold-nanoparticle hybrid structure able to change its configuration, which is transduced in a change of its plasmonic properties, upon interaction with a specific DNA target. We investigated its response when analyzed in three different media: aqueous solution, solid support and viscous gel. We show that, once a conformational variation is produced, it remains unaffected by the subsequent physical interactions with the environment.

Effect of Nanogap Morphology on Plasmon Coupling

Plasmon coupling is the fundamental principle by which the optical resonances in nanoparticle assemblies are tuned. Interactions of plasmons among nanoparticles in close proximity create plasmon coupling modes whose energies are sensitive to the nanogap parameters. Whereas many studies have focused on the gap distances, we herein probe the effect of gap morphology on plasmon coupling. Dimers that are prepared by adsorbing perfectly round ultrauniform Au nanospheres (AuNSs) onto the faces, edges, and vertices of Au nanocubes (AuNCs) present distinctly different nanogap morphologies. Dark-field single-particle scattering spectroscopy reveals that the longitudinal plasmon coupling mode shifts to lower energies as the AuNS forms a nanogap with parts of the AuNC with higher curvature. Simulation spectra are also consistent with this observation. Our calculations indicate that the much larger charge density at the vertex or edge of a AuNC lowers the plasmon coupling energy through the contribution of the Coulomb interaction when the AuNC combines with the AuNS. In comparison, the plasmon energies or anisotropic polarizability along the face, edge, and vertex directions of a AuNC differ only slightly and thus do not cause a shift in the plasmon coupling mode.

Tunable gap plasmons in gold nanospheres adsorbed into a pH-responsive polymer film

HYPOTHESIS

Plasmon nanorulers are exquisitely sensitive distance sensors that are based on the electromagnetic interaction between metal nanoparticles and surfaces. We hypothesize that nanorulers can act as quantitative probes of processes such as particle aggregation and adsorption, and deploy them to investigate particle adsorption onto stimulus-responsive polymer films. While such systems have previously been qualitatively investigated with plasmon nanorulers, our quantitative analysis should provide deeper insights.

EXPERIMENT

Gold nanospheres are adsorbed from solution onto pH-responsive, amine-rich polyelectrolyte multilayer (PEM) films that are either directly deposited on a gold substrate or onto an intermediate self-assembled monolayer (SAM) of charged thiols. Fitting the optical scattering spectrum to a full-wave calculation, we quantify the sphere-substrate gap distance with good accuracy.

FINDINGS

We find that the gold spheres partially embed into the PEMs rather than ride on top of them, and that although the amount of actuation of the spheres afforded by tuning the pH is well controlled, it is significantly smaller than the corresponding thickness changes in unstrained films. Further, the presence of a SAM below the PEM increases the amount of polymer in the PEM, except for the thickest and most highly charged films, where the SAM instead appears to displace from the area below the nanospheres.

Tunable surface plasmon polaritons and ultrafast dynamics in 2D nanohole arrays

High-quality and unique surface plasmon resonance (SPR) with a narrow linewidth and controllable resonance energy plays a key role in wide applications including ultrahigh-resolution spectroscopy, on-chip sensing, optical modulation, and solar cell technology. In this work, the response of surface plasmon polariton (SPP) modes in Au nanohole arrays has been effectively tuned by properly adjusting the sample orientation without changing the geometrical parameters, and a very narrow linewidth down to 8 nm is achieved via the strong interference of two (0, -1) and (-1, 0) SPP modes in the Γ-M direction under transverse magnetic polarization. These results have been validated excellently by finite-element-method numerical simulations. More importantly, we have quantitatively investigated the contribution of conduction-band electron distribution to the SPP intensity of the array within a 20 ps timescale with ultrahigh sensitivity by utilizing home-built femtosecond transient absorption spectroscopy, and observed the minimum SPP intensity at ∼700 fs following excitation with a 0.2 μJ pulse. This study may help enhance the understanding toward the intrinsic micromechanism of SPR, thus offering opportunities for potential applications in strong coupling and new-style optical wave manipulations.

Single-Particle Dynamic Light Scattering: Shapes of Individual Nanoparticles

Metallic nanoparticles (MNPs) are prevalent in modern nanotechnologies due to their unique optical properties, chemical and photostability, and ease of manipulation. In particular, many recent advances have highlighted the importance of fundamentally understanding dynamic reconfiguration in MNP morphologies and compositions. Techniques to measure the shape of a single particle are lacking, however, often requiring immobilization, extensive numerical simulations, and irreversible alterations of the particle or its environment. In this work, we introduce "single-particle dynamic light scattering" (SP-DLS) as a far-field technique capable of analyzing the shape of individual, freely diffusing MNPs. Assuming symmetric-top rotors for MNPs and passively confining them to the focal volume of a dark-field microscope for long-term observation, we directly relate polarization dynamic fluctuations in the scattered light to the relative difference between the nondegenerate axes of individual particles. Our results show remarkable agreement with transmission electron microscopy analyses of the same population and allow for unprecedented measurements of the extent of prolate or oblate asphericity of nominally spherical MNPs in solution where the current implementation affords an asphericity detection limit of ∼2.5% assuming a 10% relative error. SP-DLS should serve as a powerful, nondestructive technique for characterizing the shapes of individual MNPs and other nanostructures.

How Does a Plasmon-Induced Hot Charge Carrier Break a C-C Bond?

Hot-electron chemistry at gold nanoparticle (AuNP) surfaces has received much attention recently because its understanding provides a basis for plasmonic photocatalysis and photovoltaics. Nonradiative decay of excited surface plasmons produces energetic hot charge carriers that transfer to adsorbate molecules and induce chemical reactions. Such plasmon-driven reactions, however, have been limited to a few systems, notably the dimerization of 4-aminobenzenethiol to 4,4'-dimercaptoazobenzene. In this work, we explore a new class of plasmon-driven reactions associated with a unimolecular bond cleavage process. We unveil the mechanism of the decarboxylation reaction of 4-mercaptobenzoic acid and extend the mechanism to account for the β-cleavage reaction of 4-mercaptobenzyl alcohol. Combining the construction of well-controlled nanogap systems and sensitive Raman spectroscopy with methodical changes of experimental conditions (laser wavelengths, interface materials, pH, ambient gases, etc.), we track the hot charge carriers from the formation to the transfer to reactants, which provides insights into how plasmon excitation eventually leads to the C-C bond cleavage of the molecules in the nanogap.

Analytical analysis of spectral sensitivity of plasmon resonances in a nanocavity

Metallic nanocavities exhibit extremely high spectral sensitivity to geometrical variations and are promising for sensing applications. Here, the sensitivity of a cubic dimer cavity, to picometer gap variation, is analysed in a model, which takes into account the phase shift of scattering at the boundaries and the quantum tunnelling effect in the small gap limit. The resonance wavelengths are expressed in terms of the plasmon frequency, the medium dielectric function, and the geometry of the gap. The sensitivity of the resonance wavelength to the gap width variation is found to be as high as 1 nm pm-1. While the resonance wavelengths depend on the materials' dielectric functions, the sensitivity is found to scale universally as a function of gap distance. In the sub-nanometer regime, electron tunnelling across the gap starts to suppress the plasmonic field, setting the limit of sensitivity of such a dimer cavity. The results given by the analytical model are complemented by numerical simulations using Comsol. Our model reveals the origin and universal behaviours of the sensitivity of the cavity plasmon and provides guidance for the design of new sensitive rulers at the picometer scale.