Size vs surface: tuning the photoluminescence of freestanding silicon nanocrystals across the visible spectrum via surface groups

Why do Si quantum dots with stronger fast emission have lower external photoluminescence quantum yield?

Silicon quantum dots (QDs) are a promising non-toxic alternative to the already well-developed platform of light-emitting semiconductor QDs based on III-V and II-VI materials. Oxidized SiQDs or those surface-terminated with long alkyl chains typically feature long-lived orange-red photoluminescence originating in quantum-confined core states. However, sometimes an additional short-lived PL band, whose mechanism is still highly debated, is reported. Here, we perform a detailed study of the room-temperature PL of SiQDs using samples covering three main fabrication techniques. We find evidence for the presence of only one set of radiative processes in addition to the typical long-lived PL. Moreover, we experimentally determine the ratio between the short- and long-lived PL component, obtaining a wide range of values (0.003 - 0.1) depending on the type of sample. In accordance with an already published report, we observe a tendency of SiQDs with stronger short-lived PL to have lower external quantum yield. We explain this trend using a model of the optical performance of an ensemble of QDs with widely varying optical characteristics through a mechanism we call selective lifetime-based quenching.

Mixed-ligand-functionalized silicon-germanium alloy nanocrystals with improved carrier mobilities

Silicon-germanium (SiGe) alloy nanocrystals (NCs) are promising for advanced optoelectronic applications due to their highly tunable composition and photophysical behaviors. The homogenous dispersion of Si and Ge atoms on the surfaces of SiGe NCs adds a degree of freedom for manipulating the surface chemistry of this type of alloy material. However, the difference in the reactivity between Si and Ge atoms brings additional difficulty in selecting appropriate surface ligands to passivate SiGe NCs. Here we report a mixed-ligand functionalization approach to passivate SiGe NCs effectively. Octadecene and oleylamine molecules serve as co-ligands to cap the surface Si and Ge atoms, respectively, yielding colloidally stable SiGe NCs with high solution dispersity and stable intrinsic near-infrared emission with a microsecond-scale lifetime decay. The resulting particles also show improved hole and electron mobilities of up to 1.1 × 10-6 cm2 V-1 s-1 and 6.3 × 10-6 cm2 V-1 s-1, 2.2 and 1.2 times improvement over the particles only passivated by octadecene ligands.

Silicon-containing nanomedicine and biomaterials: materials chemistry, multi-dimensional design, and biomedical application

The invention of silica-based bioactive glass in the late 1960s has sparked significant interest in exploring a wide range of silicon-containing biomaterials from the macroscale to the nanoscale. Over the past few decades, these biomaterials have been extensively explored for their potential in diverse biomedical applications, considering their remarkable bioactivity, excellent biocompatibility, facile surface functionalization, controllable synthesis, etc. However, to expedite the clinical translation and the unexpected utilization of silicon-composed nanomedicine and biomaterials, it is highly desirable to achieve a thorough comprehension of their characteristics and biological effects from an overall perspective. In this review, we provide a comprehensive discussion on the state-of-the-art progress of silicon-composed biomaterials, including their classification, characteristics, fabrication methods, and versatile biomedical applications. Additionally, we highlight the multi-dimensional design of both pure and hybrid silicon-composed nanomedicine and biomaterials and their intrinsic biological effects and interactions with biological systems. Their extensive biomedical applications span from drug delivery and bioimaging to therapeutic interventions and regenerative medicine, showcasing the significance of their rational design and fabrication to meet specific requirements and optimize their theranostic performance. Additionally, we offer insights into the future prospects and potential challenges regarding silicon-composed nanomedicine and biomaterials. By shedding light on these exciting research advances, we aspire to foster further progress in the biomedical field and drive the development of innovative silicon-composed nanomedicine and biomaterials with transformative applications in biomedicine.

Cost-Effective Ultrabright Silicon Quantum Dots and Highly Efficient LEDs from Low-Carbon Hydrogen Silsesquioxane Polymers

Cost-effective methods of synthesizing bright colloidal silicon quantum dots (SiQDs) for use as heavy-metal-free QDs, which have applications as light sources in biomedicine and displays, are required. We report simple protocols for synthesizing ultrabright colloidal SiQDs and fabricating SiQD LEDs based on hydrogen silsesquioxane (HSQ) polymer synthesis. Red photoluminescence with a quantum yield (PLQY) of 60-80% and LEDs with an external quantum efficiency (EQE) of >10% were obtained at 1/3600th of the cost of existing methods. This was achieved by using HSiCl3 and a low-polarity solvent to prepare the HSQ polymer and by optimizing the LED hole-injection layer thickness. A stochastic analysis of 31 SiQD syntheses revealed that SiQDs with the highest PLQYs were obtained from a hard, low-carbon HSQ polymer precursor containing many Si-H groups and cage structures. Notably, simple FTIR measurements predicted whether a HSQ polymer would yield high-PLQY SiQDs and high-EQE LEDs. These straightforward, cost-effective protocols should lead to advances in SiQD synthesis and LED fabrication methods.

Not all silicon quantum dots are equal: photostability of silicon quantum dots with and without a thick amorphous shell

Luminescent colloidal silicon quantum dots (SiQDs) are sustainable alternatives to metal-based QDs for various optical applications. While the materials are reliant on their photoluminescence efficiency, the relationship between the structure and photostability of SiQDs is yet to be well studied. An amorphous silicon (a-Si) shell was recently discovered in SiQDs prepared by thermally-processed silicon oxides. As a-Si is known as a source of defects upon UV irradiation, the disordered shell could potentially have an adverse effect on the optical properties of nanoparticles. Herein, the photostability of ∼5 nm diameter SiQDs with an amorphous shell was compared with that of over-etched SiQDs of equivalent dimensions that bore an a-Si shell of negligible thickness. An UV-induced degradation study was conducted by subjecting toluene solutions of SiQDs to 365 nm light-emitting diodes (LEDs) under an inert atmosphere for predetermined times up to 72 hours. The structure, composition, and optical responses of the exposed SiQDs were evaluated.

Enhancing CO2 reduction through the catalytic effect of a novel silicon haeckelite-inspired 2D material

We propose a novel 2D material based on silicon haeckelite (Hck), whose structure contains a silicon atom arranged in a periodic pattern of pentagons and heptagons. Stacking the two layers gives rise to a planar geometry of the layers that compose it. This new structure presents a semiconductor character with a band gap of 0.17 eV. Furthermore, we studied CO2 reduction using molecular hydrogen to form formic acid, carbon monoxide, formaldehyde, methanol, and methane. All these have been studied theoretically at the Grimme D3BJ corrected TPSS/def2-SVP level. A massive biflake containing 132 Si atoms was used to model the Hck surface. According to the results, CO2 capture with Hck is a spontaneous step; in contrast, the same process for silicene mono- and bi-flakes studied previously was endergonic. After the capture of CO2, the addition of H2 to the substrate passes through an intermediate containing a Si-H bond. The formation of Si-H intermediates is the origin of the catalytic effect, facilitating H2 dissociation and acting as the hydrogen atom donor for the substrate. These intermediates are transformed by adding hydrogen atoms and losing water molecules, producing formic acid and formaldehyde as the most probable products, with rate-controlling steps of 29.2 and 27 kcal mol-1, whose values were less than those exhibited by the silicene biflake. This means that the silicon haeckelite biflake presents better catalytic activity than the silicene biflake. The results show that the novel 2D silicon hackelite material has remarkable potential for CO2 capture and reduction. The theoretical analysis of this innovative 2D structure provides valuable insights into the potential applications of silicene-based materials.

Stratum-Confined Solid-State Reaction (SC-SSR) toward Colloidal Silicon-Based Hollow Nanostructures for Bioapplications

Silicon nanostructures (SiNSs) can provide multifaceted bioapplications; but preserving their subhundred nm size during high-temperature silica-to-silicon conversion is the major bottleneck. The SC-SSR utilizes an interior metal-silicide stratum space at a predetermined radial distance inside silica nanosphere to guide the magnesiothermic reduction reaction (MTR)-mediated synthesis of hollow and porous SiNSs. In depth mechanistic study explores solid-to-hollow transformation encompassing predefined radial boundary through the participation of metal-silicide species directing the in-situ formed Si-phase accumulation within the narrow stratum. Evolving thin-porous Si-shell remains well protected by the in-situ segregated MgO emerging as a protective cast against the heat-induced deformation and interparticle sintering. Retrieved hydrophilic SiNSs (<100 nm) can be conveniently processed in different biomedia as colloidal solutions and endocytosized inside cells as photoluminescence (PL)-based bioimaging probes. Inside the cell, rattle-like SiNSs encapsulated with Pd nanocrystals can function as biorthogonal nanoreactors to catalyze intracellular synthesis of probe molecules through C-C cross coupling reaction.

The luminescence mechanism of ligand-induced interface states in silicon quantum dots

Over decades of research on photoluminescence (PL) of silicon quantum dots (Si-QDs), extensive exploratory experiments have been conducted to find ways to improve the photoluminescence quantum yield. However, the complete physical picture of Si-QD luminescence is not yet clear and needs to be studied in depth. In this work, which considers the quantum size effect and surface effect, the optical properties of Si-QDs with different sizes and surface terminated ligands were calculated based on first principles calculations. The results show that there are significant differences in the emission wavelength and emission intensity of Si-QD interface states connected by different ligands, among which the emission of silicon-oxygen double bonds is the strongest. When the size of the Si-QD increases, the influence of the surface effect weakens, and only the silicon-oxygen double bonds still localize the charge near the ligand, maintaining a high-intensity luminescence. In addition, the presence of surface dangling bonds also affects luminescence. This study deepens the understanding of the photoluminescence mechanism of Si-QDs, and provides a direction for both future improvement of the photoluminescence quantum efficiency of silicon nanocrystals and for fabricating silicon-based photonic devices.

Excitation dependent emissive multi stimuli responsive ESIPT organic luminogen for monitoring sea food freshness

Excited state intramolecular proton transfer (ESIPT) organic luminophores with excitation wavelength-dependent color tunability have drawn significant attention due to their exceptional photoluminescent properties in solution and solid state. A novel salicylaldehyde-based Schiff's base molecule, (E)-N'-(3,5-dibromo-2-hydroxybenzylidene)benzohydrazide (BHN) exhibited stimuli (excitation wavelength and pH) induced changes in fluorescence properties which was utilised for applications like trace level water sensing in organic solvents (THF, acetone and DMF), detection and quantification of biogenic amines and anticounterfeiting. In the solution state, BHN rendered a ratiometric detection and quantification of ammonia, diethylamine and trimethylamine, which is further supported by DFT studies. The photoluminescent response of BHN towards various biogenic amines was later utilised to monitor shrimp freshness. The investigation carried out highlights the potential versatility of ESIPT hydrazones, which renders multi stimuli responsive behaviour that can be utilised for water sensing, anticounterfeiting and the detection and quantification of biogenic amines.

Nanostructured silicon photocatalysts for solar-driven fuel production

Solar-driven production of fuels such as hydrogen, hydrocarbons, and ammonia using semiconducting photocatalysts has the potential to be a sustainable alternative to current chemical processes. In recent years, silicon (Si) nanostructures have been recognized as a promising photocatalyst for hydrogen generation and organic oxidation reactions owing to its abundance, biocompatibility, and cost. While bulk Si has been studied extensively, on the nanoscale, plenty of opportunities exist to understand and engineer optimally performing Si photocatalysts. This perspective will highlight key results on the use of Si nanostructures for photocatalytic H₂ production, CO₂ reduction via light and heat-driven chemical looping, and current challenges in utilizing it for fuel-forming reactions. A brief guide on how these challenges can be addressed in the future and other unexplored questions that remain in the field are also discussed.

Stable Cuprous Hydroxide Nanostructures by Organic Ligand Functionalization

Copper compounds have been extensively investigated for diverse applications. However, studies of cuprous hydroxide (CuOH) have been scarce due to structural metastability. Herein, a facile, wet-chemistry procedure is reported for the preparation of stable CuOH nanostructures via deliberate functionalization with select organic ligands, such as acetylene and mercapto derivatives. The resulting nanostructures are found to exhibit a nanoribbon morphology consisting of small nanocrystals embedded within a largely amorphous nanosheet-like scaffold. The acetylene derivatives are found to anchor onto the CuOH forming CuC linkages, whereas CuS interfacial bonds are formed with the mercapto ligands. Effective electronic coupling occurs at the ligand-core interface in the former, in contrast to mostly non-conjugated interfacial bonds in the latter, as manifested in spectroscopic measurements and confirmed in theoretical studies based on first principles calculations. Notably, the acetylene-capped CuOH nanostructures exhibit markedly enhanced photodynamic activity in the inhibition of bacteria growth, as compared to the mercapto-capped counterparts due to a reduced material bandgap and effective photocatalytic generation of reactive oxygen species. Results from this study demonstrate that deliberate structural engineering with select organic ligands is an effective strategy in the stabilization and functionalization of CuOH nanostructures, a critical first step in exploring their diverse applications.

Water-borne, durable and multicolor silicon nanoparticles/sodium alginate inks for anticounterfeiting applications

Recently, water-borne fluorescent inks have attracted extensive attention in anti-counterfeiting applications due to their convenient implementation and eco-friendliness. However, due to poor service durability, the latent authorization information from the inks is easily damaged, and even disappears when encountering water. Moreover, most of the existing fluorescent inks are monochromic, toxic, and allergic to skin, thus are unsuitable for their sustainability during real-life applications. Herein, this work presents environment-friendly, durable, and multicolor fluorescent anti-counterfeiting silicon nanoparticles (SiNPs)/sodium alginate (SA) inks. The multicolor SiNPs are synthesized by a one-pot method with defined morphologies and optical properties. Subsequently, SA is employed as the binder to prepare the fluorescent inks with optimized rheological properties. Practicability results show that the SiNPs/SA inks not only exhibit excellent printability, but also impart authentic information with superior covert performance. More notably, spraying solution of calcium dichloride can further improve fluorescent fastnesses of the SiNPs/SA inks by ionic crosslinking.

Highly Efficient Energy Transfer from Silicon to Erbium in Erbium-Hyperdoped Silicon Quantum Dots

Erbium-doped silicon (Er-doped Si) materials hold great potential for advancing Si photonic devices. For Er-doped Si, the efficiency of energy transfer (η_ET) from Si to Er³⁺ is crucial. In order to achieve high η_ET, we used nonthermal plasma to synthesize Si quantum dots (QDs) hyperdoped with Er at the concentration of ~1% (i.e., ~5 × 10²⁰ cm^-3). The QD surface was subsequently modified by hydrosilylation using 1-dodecene. The Er-hyperdoped Si QDs emitted near-infrared (NIR) light at wavelengths of ~830 and ~1540 nm. An ultrahigh η_ET (~93%) was obtained owing to the effective energy transfer from Si QDs to Er³⁺, which led to the weakening of the NIR emission at ~830 nm and the enhancement of the NIR emission at ~1540 nm. The coupling constant (γ) between Si QDs and Er³⁺ was comparable to or greater than 1.8 × 10^-12 cm³·s^-1. The temperature-dependent photoluminescence and excitation rate of Er-hyperdoped Si QDs indicate that strong coupling between Si QDs and Er³⁺ allows Er³⁺ to be efficiently excited.

Magneto-Fluorescent Mesoporous Nanocarriers for the Dual-Delivery of Ofloxacin and Doxorubicin to Tackle Opportunistic Bacterial Infections in Colorectal Cancer

Cancer-related opportunistic bacterial infections are one major barrier for successful clinical therapies, often correlated to the production of genotoxic factors and higher cancer incidence. Although dual anticancer and antimicrobial therapies are a growing therapeutic fashion, they still fall short when it comes to specific delivery and local action in in vivo systems. Nanoparticles are seen as potential therapeutic vectors, be it by means of their intrinsic antibacterial properties and effective delivery capacity, or by means of their repeatedly reported modulation and maneuverability. Herein we report on the production of a biocompatible, antimicrobial magneto-fluorescent nanosystem (NANO3) for the delivery of a dual doxorubicin-ofloxacin formulation against cancer-related bacterial infections. The drug delivery capacity, rendered by its mesoporous silica matrix, is confirmed by the high loading capacity and stimuli-driven release of both drugs, with preference for tumor-like acidic media. The pH-dependent emission of its surface fluorescent SiQDs, provides an insight into NANO3 surface behavior and pore availability, with the SiQDs working as pore gates. Hyperthermia induces heat generation to febrile temperatures, doubling drug release. NANO3-loaded systems demonstrate significant antimicrobial activity, specifically after the application of hyperthermia conditions. NANO3 structure and antimicrobial properties confirm their potential use in a future dual anticancer and antimicrobial therapeutical vector, due to their drug loading capacity and their surface availability for further modification with bioactive, targeting species.

Color-Switchable Nanosilicon Fluorescent Probes

Fluorescent probes are vital to cell imaging by allowing specific parts of cells to be visualized and quantified. Color-switchable probes (CSPs), with tunable emission wavelength upon contact with specific targets, are particularly powerful because they not only eliminate the need to wash away all unbound probe but also allow for internal controls of probe concentrations, thereby facilitating quantification. Several such CSPs exist and have proven very useful, but not for all key cellular targets. Here we report a pioneering CSP for in situ cell imaging using aldehyde-functionalized silicon nanocrystals (SiNCs) that switch their intrinsic photoluminescence from red to blue quickly when interacting with amino acids in live cells. Though conventional probes often work better in cell-free extracts than in live cells, the SiNCs display the opposite behavior and function well and fast in universal cell lines at 37 °C while requiring much higher temperature in extracts. Furthermore, the SiNCs only disperse in cytoplasm not nucleus, and their fluorescence intensity correlated linearly with the concentration of fed amino acids. We believe these nanosilicon probes will be promising tools to visualize distribution of amino acids and potentially quantify amino acid related processes in live cells.

Modular silacyclopropenes: synthesis and application for Si-H containing substrate functionalization

A method to functionalize Si-H containing substrates with vinyl substituted silacyclopropenes has been developed. This provides an efficient and versatile technique to generate multi-functional silacyclopropene derivatives, ranging from small molecules to polymeric materials like polysiloxanes. Thus, access is given to a new class of functionalized materials that exhibits potential in a variety of possible applications.

Synthesis of sulfhydryl functionalized silicon quantum dots with high quantum yield for imaging of hypochlorite in cells and zebrafish

Sulfhydryl functionalized silicon quantum dots (S-SiQDs) with a fluorescence quantum yield of 38.5% were synthesized using 3-mercaptopropyltrimethoxysilane (MPTMS) and m-phenylenediamine by a simple one-pot method. It is worth noting that by oxidizing the surface sulfhydryl groups and statically quenching, the fluorescence of S-SiQDs at 492 nm (excitation at 383 nm) can be selectively quenched by hypochlorite (ClO^-) in a linear range of 0.05 to 1.8 μM with a low detection limit of 13 nM. The reaction was completed in 10 s with no interference from other ROS, metal ions, anions and reducing species. The silicon source containing sulfhydryl groups was used to synthesize silicon quantum dots for the first time, and the surface of the S-SiQDs was provided with sulfhydryl groups and reacted rapidly and sensitively with ClO^-. The S-SiQDs have good photostability and biocompatibility, and can be further used for ClO^- imaging in MCF-7 cells and zebrafish, showing great promise in biological imaging. The proposed assay demonstrates that 3-mercaptopropyltrimethoxysilane is a good choice to obtain a functionalized fluorescent nanoprobe for redox species.

Azadirachta indica Seed Derived Carbon Nanocapsules: Cell Imaging, Depolarization of Mitochondrial Membrane Potential, and Dose-Dependent Control Death of Breast Cancer

In this work, a series of mesoporous carbon nanocapsules (mCNS) of size below 10 nm have been prepared from Azadirachta indica seeds with a very easy and cost-effective approach. These nanocapsules can emit red and green light and are effective for cell imaging. Further, these carbon nanocapsules are biocompatible toward the normal healthy cells, however, they possess modest cytotoxicity against the MCF-7 (human breast cancer) and triple-negative breast cancer (TNBC) (MDA- MB-231 breast cancer cells), and the rate of killing cancer cells strongly depends on the dose of mCNCs. Further, the mitochondrial membrane potential and apoptosis assay were performed to analyze the therapeutic significance of these nanocapsules to kill breast cancer. Results showed that these carbon nanocapsules can depolarize the mitochondrial membrane potential alone (without using conventional drugs) and can change the physiological parameters and cellular metabolic energy of the cancer cells and kill them. The apoptosis results confirmed the death of breast cancer cells in the form of apoptosis and necrosis. Moreover, the results suggested that the porous carbon nanocapsules (mCNCs) reported herein can be used as a potential candidate and useful for the theranostic applications such as for cancer cell detection and therapy without using any conventional drugs.

Si-H Surface Groups Inhibit Methacrylic Polymerization: Thermal Hydrosilylation of Allyl Methacrylate with Silicon Nanoparticles

Hydrogen-terminated silicon nanoparticles (H-SiNPs) inhibit anerobic thermal autopolymerization of methacrylates. When heated to 100 °C under an inert atmosphere, allyl methacrylate (AMA) was stable for at least 95 h in the presence of 1.2 wt % H-SiNPs, exhibiting less than 0.15% conversion, whereas the neat monomer solidified within 24 h (over 10% conversion after 34 h). A mechanism is proposed that is based on H-transfer from SiNPs to the thermally activated methacrylic dimer biradical, quenching autopolymerization. An analysis of SiNPs isolated after heating in AMA reveals the grafting of ester groups. Thermal hydrosilylation offers a facile way to attach an allyl group to the surface of SiNPs.

Study of the Effect of Nitric Acid in Electrochemically Synthesized Silicon Nanocrystals: Tunability of Bright and Uniform Photoluminescence

In this work, we show a correlation between the composition and the microstructural and optical properties of bright and uniform luminescent porous silicon (PSi) films. PSi films were synthesized by electrochemical etching using nitric acid in an electrolyte solution. PSi samples synthesized with nitric acid emit stronger (up to six-fold greater) photoluminescence (PL) as compared to those obtained without it. The PL peak is shifted from 630 to 570 nm by changing the concentration ratio of the HF:HNO₃:(EtOH-H₂O) electrolyte solution, but also shifts with the excitation energy, indicating quantum confinement effects in the silicon nanocrystals (Si-NCs). X-ray photoelectron spectroscopy analysis shows a uniform silicon content in the PSi samples that emit the strongest PL. High-resolution transmission electron microscopy reveals that the Si-NCs in these PSi samples are about ~2.9 ± 0.76 nm in size and are embedded in a dense and stoichiometric SiO₂ matrix, as indicated by the Fourier transform infrared analysis. On the other hand, the PSi films that show PL of low intensity present an abrupt change in the silicon content depth and the formation of non-bridging oxygen hole center defects.

Ligand-Induced Ground- and Excited-State Chirality in Silicon Nanoparticles: Surface Interactions Matter

Silicon-based light-emitting materials have emerged as a favorable substitute to various organic and inorganic systems due to silicon's high natural abundance, low toxicity, and excellent biocompatibility. However, efforts on the design of free-standing silicon nanoparticles with chiral non-racemic absorption and emission attributes are rather scare. Herein, we unravel the structural requirements for ligand-induced chirality in silicon-based nanomaterials by functionalizing with D- and L-isomers of a bifunctional ligand, namely, tryptophan. The structural aspects of these systems are established using high-resolution high-angle annular dark-field imaging in the scanning transmission electron microscopy mode, solid-state nuclear magnetic resonance, Fourier transform infrared, and X-ray photoelectron spectroscopy. Silicon nanoparticles capped with L- and D-isomers of tryptophan displayed positive and negative monosignated circular dichroic signals and circularly polarized luminescence indicating their ground- and excited-state chirality. Various studies supported by density functional theory calculations signify that the functionalization of indole ring nitrogen on the silicon surface plays a decisive role in modifying the chiroptical characteristics by generating emissive charge-transfer states. The chiroptical responses originate from the multipoint interactions of tryptophan with the nanoparticle surface through the indole nitrogen and -CO₂^- groups that can transmit an enantiomeric structural imprint on the silicon surface. However, chiroptical properties are not observed in phenylalanine- and alanine-capped silicon nanoparticles, which are devoid of Si-N bonds and chiral footprints. Thus, the ground- and excited-state chiroptics in tryptophan-capped silicon nanoparticles originates from the collective effect of ligand-bound emissive charge-transfer states and chiral footprints. Being the first report on the circularly polarized luminescence in silicon nanoparticles, this work will open newer possibilities in the field of chirality.

Designing Efficient Si Quantum Dots and LEDs by Quantifying Ligand Effects

The impact of colloidal silicon quantum dots (SiQDs) on next-generation light sources is promising. However, factors determining the efficiency of SiQDs, such as the photoluminescence (PL) wavelength, PL quantum yield (PLQY), and the SiQD LED performance based on the type of ligand, ligand coverage, stress, and dangling bonds, have not been quantified. Characterizing these variables would accelerate the design and implementation of SiQDs. Herein, colloidal SiQDs were synthesized by pyrolyzing hydrogen silsesquioxane and their surfaces were terminated with 1-decene by either thermal hydrosilylation (HT-SiQDs) or room-temperature hydrosilylation using PCl₅ (RT-SiQD). As a result, PL, PL-excitation, and ultraviolet-visible absorption spectra were similar, but their PLQYs were significantly different: 54% (RT-SiQDs) vs 19% (HT-SiQDs). To understand their similarities and differences, surface coverages (dangling bonds, Si-H (≡Si-H₁, ═Si-H₂, and -Si-H₃), Si-O-Si, Si-C, Si-Cl) were determined. A core stress analysis established that a single ligand terminated to a SiQD bond site stretched the Si-Si bond length by 0.3%. From the two well-defined SiQDs, the PLQY and SiQD LED efficiency were attributed to four factors: low coverage of insulator ligands, the Cl ligand effect on radiative and nonradiative rates, negligible dangling bonds, and a SiQD core with low tensile stress. The PLQY of the RT-SiQDs in toluene was 80%. In addition, the 20× electroluminescence intensity difference of the LEDs originated from a 10× difference in current density and a 2× difference in Auger recombination. The concepts demonstrated here can be applied to further improve the PLQY and LED efficiencies of SiQDs with other ligands.

Tailoring B-doped silicon nanocrystal surface chemistry via phosphorus pentachloride - mediated surface alkoxylation

Doped silicon nanocrystals (SiNCs) are promising materials that could find use in a wide variety of applications. Realizing methods to tailor the surface chemistry of these particles offers greater tunability of the material properties as well as broader solvent compatibility. Herein, we report organic-soluble B-doped SiNCs prepared via a thermal processing method followed by phosphorus pentachloride etching induced functionalization with alkoxy ligands of varied chain lengths. This approach provides a scalable route to solution processable B-doped SiNCs and establishes a potential avenue for the functionalization of other doped SiNCs.

Enhancement in external quantum efficiency of light-emitting diode based on colloidal silicon nanocrystals

Herein, we report an enhanced red emission from colloidal silicon nanocrystals (c-Si NCs) solution-processed light-emitting diode. c-Si NCs were synthesized by facile femtosecond laser ablation. Based on the structural characterization and opto-electrics properties analysis, both photoluminescence and electroluminescence arise from the radiative recombination of carriers due to quantum confined effect. The optical power density and highest external quantum efficiency have been obtained to be 0.79 mW cm^-2and ∼6.6%, respectively. These results indicate that Si NCs are very attractive as a potential optical source for future integrated chips.

"Turning the dials": controlling synthesis, structure, composition, and surface chemistry to tailor silicon nanoparticle properties

Silicon nanoparticles (SiNPs) can be challenging to prepare with defined size, crystallinity, composition, and surface chemistry. As is the case for any nanomaterial, controlling these parameters is essential if SiNPs are to realize their full potential in areas such as alternative energy generation and storage, sensors, and medical imaging. Numerous teams have explored and established innovative synthesis methods, as well as surface functionalization protocols to control these factors. Furthermore, substantial effort has been expended to understand how the abovementioned parameters influence material properties. In the present review we provide a commentary highlighting the benefits and limitations of available methods for preparing silicon nanoparticles as well as demonstrations of tailoring optical and electronic properties through definition of structure (i.e., crystalline vs. amorphous), composition and surface chemistry. Finally, we highlight potential opportunities for future SiNP studies.

Surface-Anisotropic Janus Silicon Quantum Dots via Masking on 2D Silicon Nanosheets

Surface-anisotropic nanoparticles represent a new class of materials that shows potential in a variety of applications, including self-assembly, microelectronics, and biology. Here, the first synthesis of surface-anisotropic silicon quantum dots (SiQDs), obtained through masking on 2D silicon nanosheets, is presented. SiQDs are deposited on the 2D substrate, thereby exposing only one side of the QDs, which is functionalized through well-established hydrosilylation procedures. The UV-sensitive masking substrate is removed through UV-irradiation, which simultaneously initiates the hydrosilylation of a second substrate, thereby introducing a second functional group to the other side of the now free-standing SiQDs. This renders surface-anisotropic SiQDs that have two different functional groups on either side of the particle. This method can be used to introduce a variety of functional groups including hydrophilic and hydrophobic substrates, while the unique optoelectronic properties of the SiQDs remain unaffected. The anisotropic morphology of the QDs is confirmed through the aggregation behavior of amphiphilic Janus SiQDs at the interface of water and hexane. Additionally, anisotropic SiQDs are used to produce the first controlled (sub)monolayer of SiQDs on a gold wafer.

Thermal Disproportionation for the Synthesis of Silicon Nanocrystals and Their Photoluminescent Properties

In the past decades, silicon nanocrystals have received vast attention and have been widely studied owing to not only their advantages including nontoxicity, high availability, and abundance but also their unique luminescent properties distinct from bulk silicon. Among the various synthetic methods of silicon nanocrystals, thermal disproportionation of silicon suboxides (often with H as another major composing element) bears the superiorities of unsophisticated equipment requirements, feasible processing conditions, and precise control of nanocrystals size and structure, which guarantee a bright industrial application prospect. In this paper, we summarize the recent progress of thermal disproportionation chemistry for the synthesis of silicon nanocrystals, with the focus on the effects of temperature, Si/O ratio, and the surface groups on the resulting silicon nanocrystals’ structure and their corresponding photoluminescent properties. Moreover, the paradigmatic application scenarios of the photoluminescent silicon nanocrystals synthesized via this method are showcased or envisioned.

Photoluminescent Nanoparticles for Chemical and Biological Analysis and Imaging

Research related to the development and application of luminescent nanoparticles (LNPs) for chemical and biological analysis and imaging is flourishing. Novel materials and new applications continue to be reported after two decades of research. This review provides a comprehensive and heuristic overview of this field. It is targeted to both newcomers and experts who are interested in a critical assessment of LNP materials, their properties, strengths and weaknesses, and prospective applications. Numerous LNP materials are cataloged by fundamental descriptions of their chemical identities and physical morphology, quantitative photoluminescence (PL) properties, PL mechanisms, and surface chemistry. These materials include various semiconductor quantum dots, carbon nanotubes, graphene derivatives, carbon dots, nanodiamonds, luminescent metal nanoclusters, lanthanide-doped upconversion nanoparticles and downshifting nanoparticles, triplet-triplet annihilation nanoparticles, persistent-luminescence nanoparticles, conjugated polymer nanoparticles and semiconducting polymer dots, multi-nanoparticle assemblies, and doped and labeled nanoparticles, including but not limited to those based on polymers and silica. As an exercise in the critical assessment of LNP properties, these materials are ranked by several application-related functional criteria. Additional sections highlight recent examples of advances in chemical and biological analysis, point-of-care diagnostics, and cellular, tissue, and in vivo imaging and theranostics. These examples are drawn from the recent literature and organized by both LNP material and the particular properties that are leveraged to an advantage. Finally, a perspective on what comes next for the field is offered.

Luminescent silicon nanoparticles for distinctive tracking of cellular targeting and trafficking

Developing therapeutic nanoparticles that actively target disease cells or tissues by exploiting the binding specificity of receptors presented on the cell surface has extensively opened up biomedical applications for drug delivery and imaging. An ideal nanoparticle for biomedical applications is required to report confirmation of relevant targeting and the ultimate fate in a physiological environment for further verification, e.g. to adapt dosage or predict response. Herein, we demonstrate tracking of silicon nanoparticles through intrinsic photoluminescence (PL) during the course of cellular targeting and uptake. Time-resolved analysis of PL characteristics in cellular microenvironments provides dynamic information on the physiological conditions where the silicon nanoparticles are exposed. In particular, the PL lifetime of the silicon nanoparticles is in the order of microseconds, which is significantly longer than the nanosecond lifetimes exhibited by fluorescent molecules naturally presented in cells, thus allowing discrimination of the nanoparticles from the cellular background autofluorescence in time-gated imaging. The PL lifetime is a physically intensive property that reports the inherent characteristics of the nanoparticles regardless of surrounding noise. Furthermore, we investigate a unique means to inform the lifespan of the biodegradable silicon nanoparticles responsive to local microenvironment in the course of endocytosis. A multivalent strategy of nanoparticles for enhanced cell targeting is also demonstrated with complementary analysis of time-resolved PL emission imaging and fluorescence correlation spectroscopy. The result presents the promising potential of the photoluminescent silicon nanoparticles toward advanced cell targeting systems that simultaneously enable tracking of cellular trafficking and tissue microenvironment monitoring.

Silicon Quantum Dot-Polymer Fabry-Pérot Resonators with Narrowed and Tunable Emissions

Luminescent silicon nanoparticles have been widely recognized as an alternative for metal-based quantum dots (QDs) for optoelectronics partly because of the high abundance and biocompatibility of silicon. To date, the broad photoluminescence line width (often >100 nm) of silicon QDs has been a hurdle to achieving competitive spectral purity and incorporating them into light-emitting devices. Herein we report fabrication and testing of straightforward configuration of Fabry-Pérot resonators that incorporates a thin layer of SiQD-polymer hybrid/blend between two reflective silver mirrors; remarkably these devices exhibit up-to-14-fold narrowing of SiQD emission and achieve a spectral bandwidth as narrow as ca. 9 nm. Our polymer-based, SiQD-containing Fabry-Pérot resonators also provide convenient spectral tunability, can be prepared using a variety of polymer hosts and substrates, and enable rigid as well as flexible devices.

Photoluminescent Nanomaterials for Medical Biotechnology

Creation of various photoluminescent nanomaterials has significantly expanded the arsenal of approaches used in modern biomedicine. Their unique photophysical properties can significantly improve the sensitivity and specificity of diagnostic methods, increase therapy effectiveness, and make a theranostic approach to treatment possible through the application of nanoparticle conjugates with functional macromolecules. The most widely used nanomaterials to date are semiconductor quantum dots; gold nanoclusters; carbon dots; nanodiamonds; semiconductor porous silicon; and up-conversion nanoparticles. This paper considers the promising groups of photoluminescent nanomaterials that can be used in medical biotechnology: in particular, for devising agents for optical diagnostic methods, sensorics, and various types of therapy.

Memristive Artificial Synapses for Neuromorphic Computing

Neuromorphic computing simulates the operation of biological brain function for information processing and can potentially solve the bottleneck of the von Neumann architecture. This computing is realized based on memristive hardware neural networks in which synaptic devices that mimic biological synapses of the brain are the primary units. Mimicking synaptic functions with these devices is critical in neuromorphic systems. In the last decade, electrical and optical signals have been incorporated into the synaptic devices and promoted the simulation of various synaptic functions. In this review, these devices are discussed by categorizing them into electrically stimulated, optically stimulated, and photoelectric synergetic synaptic devices based on stimulation of electrical and optical signals. The working mechanisms of the devices are analyzed in detail. This is followed by a discussion of the progress in mimicking synaptic functions. In addition, existing application scenarios of various synaptic devices are outlined. Furthermore, the performances and future development of the synaptic devices that could be significant for building efficient neuromorphic systems are prospected.

Boosting thermo-photocatalytic CO2 conversion activity by using photosynthesis-inspired electron-proton-transfer mediators

Natural photosynthesis proceeded by sequential water splitting and CO2 reduction reactions is an efficient strategy for CO2 conversion. Here, mimicking photosynthesis to boost CO2-to-CO conversion is achieved by using plasmonic Bi as an electron-proton-transfer mediator. Electroreduction of H2O with a Bi electrode simultaneously produces O2 and hydrogen-stored Bi (Bi-Hx). The obtained Bi-Hx is subsequently used to generate electron-proton pairs under light irradiation to reduce CO2 to CO; meanwhile, Bi-Hx recovers to Bi, completing the catalytic cycle. This two-step strategy avoids O2 separation and enables a CO production efficiency of 283.8 μmol g-1 h-1 without sacrificial reagents and cocatalysts, which is 9 times that on pristine Bi in H2 gas. Theoretical/experimental studies confirm that such excellent activity is attributed to the formed Bi-Hx intermediate that improves charge separation and reduces reaction barriers in CO2 reduction.

High-performance metal-semiconductor-metal ZnSnO UV photodetector via controlling the nanocluster size

Solution processing of amorphous oxide semiconductors (AOS) is used for electronic and optoelectronic applications. However, the device performance is much lower than that for a device that is fabricated using vacuum processing. This study uses acetylacetone (acac) as an additive in the precursor solution to reduce the nanocluster size in a ZnSnO (ZTO) film. A metal-semiconductor-metal (MSM)-type UV photodetector (PD) is fabricated using as-prepared ZTO film. ZTO film that features a smaller nanocluster size, so more oxygen vacancies are induced, which produces more electrons and the photocurrent is increased. The surface at the metal/semiconductor interface is smoother so there is greater contact with fewer interface states and the dark current is decreased. An extremely high photo-to-dark current ratio (PDCR) of 1314 is achieved for a solution-processed ZTO MSM-type PD.

Time-gated luminescence imaging of positively charged poly-l-lysine-coated highly microporous silicon nanoparticles in living Hydra polyp

The development of non-toxic fluorescent agents alternative to heavy metal-based semiconductor quantum dots represents a relevant topic in biomedical research and in particular in the bioimaging field. Herein, highly luminescent Si─H terminal microporous silicon nanoparticles with μs-lived photoemission are chemically modified with a two step process and successfully used as label-free probes for in vivo time-gated luminescence imaging. In this context, Hydra vulgaris is used as model organism for in vivo study and validity assessment. The application of time gating allows to pursue an effective sorting of the signals, getting rid of the most common sources of noise that are fast-decay tissue autofluorescence and excitation scattering within the tissue. Indeed, an enhancement by a factor ~ 20 in the image signal-to-noise ratio can be estimated.

Exploration of synthesizing fluorescent silicon nanoparticles and label-free detection of sulfadiazine sodium

Herein, silica nanoparticles (SiNPs) with blue-fluorescence have been originally synthesized through one facile hydrothermal way, and this kind of SiNPs were water-soluble with the relative quantum yield of around 6%. Meanwhile, N-(triethoxysilylpropyl) urea severed as the silica source, while potassium hydrogen phthalate as the doping reagent. Also, SiNPs exhibited the acceptable stability and excitation-dependent fluorescence property. Moreover, their surfaces of the obtained SiNPs were equipped with multiple functional groups including -Si-O-Si-, -Si-H, -COOH, -NH₂ and -OH. Importantly, the fluorescence of SiNPs could be specifically quenched by sulfadiazine sodium (SD-Na), thus achieving a label-free detection of SD-Na, which displayed a wide linear response in the range of 0.8 μM-800 μM with a detection limit of 1.02 μM. Additionally, we explored the mechanism of SiNPs sensing SD-Na on the basis of aggregation-induced quenching. To be specific, the particle size of SiNPs increased from 29.9 nm to 203.7 nm induced by the electrostatic interactions between SiNPs and SD-Na, which was further confirmed by high resolution transmission electron microscopy. Consequently, the proposed strategy here broadened the ways of assaying sulfadiazine sodium.

Functional Bio-inorganic Hybrids from Silicon Quantum Dots and Biological Molecules

Quantum dots (QDs) are semiconductor nanoparticles that exhibit photoluminescent properties useful for applications in the field of diagnostics and medicine. Successful implementation of these QDs for bio-imaging and bio/chemical sensing typically involves conjugation to biologically active molecules for recognition and signal generation. Unfortunately, traditional and widely studied QDs are based upon heavy metals and other toxic elements (e.g., Cd- and Pb-based QDs), which precludes their safe use in actual biological systems. Silicon quantum dots (SiQDs) offer the same advantages as these heavy-metal-based QDs with the added benefits of nontoxicity and abundance. The preparation of functional bio-inorganic hybrids from SiQDs and biomolecules has lagged significantly compared to their traditional toxic counterparts because of the challenges associated with the synthesis of water-soluble SiQDs and their relative instability in aqueous environments. Advances in SiQD synthesis and surface functionalization, however, have made possible the preparation of functional bio-inorganic hybrids from SiQDs and biological molecules through different bioconjugation reactions. In this contribution, we review the various bioconjugate reactions by which SiQDs have been linked to biomolecules and implemented as platforms for bio-imaging and bio/chemical sensing. We also highlight the challenges that need to be addressed and overcome for these materials to reach their full potential. Lastly, we give prospective applications where this unique class of nontoxic and biocompatible materials can be of great utility in the future.

Morphological and Surface-State Challenges in Ge Nanoparticle Applications

The intrinsic properties of Ge in tandem with advances in its nanostructuring have resulted in its increased attention in a variety of fields as an alternative to traditional group 12-14 and 14-16 nanoparticles (NPs). The small band gap and size-dependent development of the optical properties in tandem with their good charge transport properties make Ge NPs a suitable material for optoelectronic devices. The low toxicity of Ge, together with its IR photoluminescence (PL) that overlaps with desirable biological optical windows used for tissue imaging, allows the exploitation of these materials in the field of bioimaging and as drug carriers. In addition, the ability of germanium to both exhibit high mechanical stability in its NP form and alloy with lithium and sodium metals has led to it being a highly attractive material for next-generation lithium ion and beyond-lithium batteries. While it is attracting considerable attention in a variety of areas, research on Ge NPs is still relatively nascent. Fundamental aspects of this material, such as its Bohr radius and the origin of different observed PLs, are still under debate. Moreover, the ability to produce Ge NPs with controlled dimensions and morphology is not yet as mature as for other classes of nanomaterials. In this review, the mechanisms and origins of these properties will be introduced, which we then relate to specific applications presented in the literature.

Design guidelines for transition metals as interstitial emitters in silicon nanocrystals to tune photoluminescence properties: zinc as biocompatible example

Silicon nanocrystals (Si NCs) are attractive candidates for biomarkers in medical imaging. Building on recent work [McVey et al., J. Chem. Phys. Lett., 2015, 6/9, 1573; McVey et al., Nanoscale, 2018, 15600], we focus on interstitial (i-) doping of Si NCs by transition metals (TMs), and investigate the optoelectronic structure with Zn as example. Carrying out extensive ground and excited state calculations using density functional theory (DFT), we provide insight into the interdependencies of parameters which define photoluminescence (PL) properties as per TM element, their position, and their density within Si NCs of realistic size. For i-Zn in Si NCs, we predict a very high radiation efficiency with a wavelength located well above the range of auto-luminescence originating from human tissue and blood. We derive general guidelines for i-TM doping of Si NCs to arrive at a desired emission wavelength with maximum radiation efficiency. Moving on from this general description, we reveal the concept of using the plasmonic resonance of i-TM dopants in the microwave (μW) spectrum to trigger selective thermal apoptosis of tagged cells in vivo after cell marking, paving the way towards a theragnostics tool with minimum side effects.

The red and blue luminescence in silicon nanocrystals with an oxidized, nitrogen-containing shell

Traditionally, two classes of silicon nanocrystals (SiNCs) are recognized with respect to their light-emission properties. These are usually referred to as the "red" and the "blue" emitting SiNCs, based on the spectral region in which the larger part of their luminescence is concentrated. The origin of the "blue" luminescence is still disputed and is very probably different in different systems. One of the important contributions to the discussion about the origin of the "blue" luminescence was the finding that the exposure of SiNCs to even trace amounts of nitrogen in the presence of oxygen induces the "blue" emission, even in originally "red"-emitting SiNCs. Here, we obtained a different result. We show that the treatment of "red" emitting, already oxidized SiNCs in a water-based environment containing air-related radicals including nitrogen-containing species as well as oxygen, diminishes, rather than induces the "blue" luminescence.

Bridging energy bands to the crystalline and amorphous states of Si QDs

The relationship between the crystallization process and opto-electronic properties of silicon quantum dots (Si QDs) synthesized by atmospheric pressure plasmas (APPs) is studied in this work. The synthesis of Si QDs is carried out by flowing silane as a gas precursor in a plasma confined to a submillimeter space. Experimental conditions are adjusted to propitiate the crystallization of the Si QDs and produce QDs with both amorphous and crystalline character. In all cases, the Si QDs present a well-defined mean particle size in the range of 1.5-5.5 nm. Si QDs present optical bandgaps between 2.3 eV and 2.5 eV, which are affected by quantum confinement. Plasma parameters evaluated using optical emission spectroscopy are then used as inputs for a collisional plasma model, whose calculations yield the surface temperature of the Si QDs within the plasma, justifying the crystallization behavior under certain experimental conditions. We measure the ultraviolet-visible optical properties and electronic properties through various techniques, build an energy level diagram for the valence electrons region as a function of the crystallinity of the QDs, and finally discuss the integration of these as active layers of all-inorganic solar cells.

Controlling Microarray Feature Spreading and Response Stability on Porous Silicon Platforms by Using Alkene-Terminal Ionic Liquids and UV Hydrosilylation

In an attempt to develop reversible sensors based on ionic liquid/porous silicon (IL/pSi) platforms, we introduce an approach using task-specific, alkene-terminal ILs (AT-ILs) for direct grafting to the hydrogen-passivated as prepared-pSi (ap-pSi) surface via UV-hydrosilylation to address previous shortcomings associated with IL pattern impermanence (i.e., spread). By employing photoluminescence emission (PLE) and Fourier-transform infrared (FT-IR) imaging measurements, we demonstrate that the covalent grafting of AT-ILs onto the ap-pSi surface via photochemical hydrosilylation not only mitigates such feature spreading but also greatly improves PLE pattern stability. Significantly, we have discovered that, upon hydrosilylation, the resulting contact pin printed IL features remain stable to repeated challenges by toluene vapors, demonstrating the utility of AT-IL hydrosilylation for producing high-fidelity microarray features on pSi toward robust optical sensory microarrays.

Precise size separation of water-soluble red-to-near-infrared-luminescent silicon quantum dots by gel electrophoresis

Gel electrophoresis, which is a standard method for separation and analysis of macromolecules such as DNA, RNA and proteins, is applied for the first time to silicon (Si) quantum dots (QDs) for size separation. In the Si QDs studied, boron (B) and phosphorus (P) are simultaneously doped. Codoping induces a negative potential on the surface of a Si QD and makes it dispersible in water. Si QDs with different B and P concentrations and grown at different temperatures (950 °C-1200 °C) are studied. It is shown that native polyacrylamide gel electrophoresis can separate codoped Si QDs by size. The capability of gel electrophoresis to immobilize size-separated QDs in a solid matrix makes detailed analyses of size-purified Si QDs possible. For example, the photoluminescence (PL) studies of the dried gel of Si QDs grown at 1100 °C demonstrate that a PL spectrum of a Si QD solution with the PL maximum around 1.4 eV can be separated into more than 15 spectra with the PL maximum changing from 1.2 to 1.8 eV depending on the migration distance. It is found that the relationship between the PL peak energy and the migration distance depends on the growth temperature of Si QDs as well as the B and P concentration. For all the samples with different impurity concentrations and grown at different temperatures, a clear trend is observed in the relationship between the full width at half maximum (FWHM) and the peak energy of the PL spectra in a wide energy range. The FWHM increases with the increasing peak energy and it is nearly twice larger than those observed for undoped Si QDs. The large PL FWHM of codoped Si QDs suggests that excitons are further localized in codoped Si QDs due to the existence of charged impurities.

Bright Silicon Nanocrystals from a Liquid Precursor: Quasi-Direct Recombination with High Quantum Yield

Silicon nanocrystals (SiNCs) with bright bandgap photoluminescence (PL) are of current interest for a range of potential applications, from solar windows to biomedical contrast agents. Here, we use the liquid precursor cyclohexasilane (Si₆H₁₂) for the plasma synthesis of colloidal SiNCs with exemplary core emission. Through size separation executed in an oxygen-shielded environment, we achieve PL quantum yields (QYs) approaching 70% while exposing intrinsic constraints on efficient core emission from smaller SiNCs. Time-resolved PL spectra of these fractions in response to femtosecond pulsed excitation reveal a zero-phonon radiative channel that anticorrelates with QY, which we model using advanced computational methods applied to a 2 nm SiNC. Our results offer additional insight into the photophysical interplay of the nanocrystal surface, quasi-direct recombination, and efficient SiNC core PL.

Improved photon absorption in dye-functionalized silicon nanocrystals synthesized via microwave-assisted hydrosilylation

Herein, we report a method to produce luminescent silicon nanocrystals (SiNc) that strongly absorb ultraviolet-visible light (300-550 nm) and emit in the near-infrared range (700-1000 nm) with a high photoluminescence quantum yield (PLQY). Using microwave-assisted hydrosilylation and employing reactive chromophores - such as ethenyl perylene, ethynyl perylene and ethylene-m-phenyl BODIPY - we are able to achieve a 10- and 3-fold enhancement of the absorption in the blue and green spectral range, respectively. The investigated dyes function both as passivating agents and highly efficient antenna, which absorb visible light and transfer the energy to SiNc with an efficiency of >95%. This enhanced absorption leads to a significant photoluminescence enhancement, up to ∼270% and ∼140% under excitation with blue and green light, respectively. Despite the gain in absolute brightness of the emission, we demonstrate that back energy transfer from the SiNc to the dyes leads to a decrease in the PLQY for dye-modified SiNc, as compared to unmodified SiNc. The synthesis of the SiNc-dye conjugates opens up new possibilities for applications of this abundant and non-toxic material in the field of solar energy harvesting, optical sensing and bioimaging via achieving strong NIR PL excited with visible light.

Spectral tuning of colloidal Si nanocrystal luminescence by post-laser irradiation in liquid

We report a simple technique to tune the luminescence spectra of blue-emitting colloidal silicon nanocrystals (Si-ncs) to the ultraviolet region via post-laser irradiation.

Fast room-temperature functionalization of silicon nanoparticles using alkyl silanols

We report a fast, easy and efficient method for the functionalization of hydrogen-terminated silicon nanoparticles (H-Si NPs). Using silanol compounds, a range of functionalized Si NPs could be produced in only 1 h reaction time at room temperature.

The next big thing for silicon nanostructures – CO2 photocatalysis

Silicon nanostructures for the catalytic conversion of CO₂ to value-added products.