Stable Plastid Transformation in PEG-treated Protoplasts of Nicotiana tabacum

Organelle-targeted gene delivery in plants by nanomaterials

Genetic engineering of plants has revolutionized agriculture and has had a significant impact on our everyday life. It has allowed for the production of crops with longer shelf lives, enhanced yields and resistance to pests and disease. The application of nanomaterials in plant genetic engineering has further augmented these programs with higher delivery efficiencies, biocompatibility and the potential for plant regeneration. In particular, subcellular targeting using nanomaterials has recently become possible with the cutting-edge developments within nanomaterials, but remains challenging despite the promise in organellar engineering for the introduction of useful traits and the elucidation of subcellular interactions. This feature article provides an overview of nanomaterial delivery within plants and highlights the application of recent progress in nanomaterials for subcellular organelle-targeted delivery.

Functional peptide-mediated plastid transformation in tobacco, rice, and kenaf

In plant engineering, plastid transformation is more advantageous than nuclear transformation because it results in high levels of protein expression from multiple genome copies per cell and is unaffected by gene silencing. The common plastid transformation methods are biolistic bombardment that requires special instruments and PEG-mediated transformation that is only applicable to protoplast cells. Here, we aimed to establish a new plastid transformation method in tobacco, rice, and kenaf using a biocompatible fusion peptide as a carrier to deliver DNA into plastids. We used a fusion peptide, KH-AtOEP34, comprising a polycationic DNA-binding peptide (KH) and a plastid-targeting peptide (AtOEP34) to successfully deliver and integrate construct DNA into plastid DNA (ptDNA) via homologous recombination. We obtained transformants in each species using selection with spectinomycin/streptomycin and the corresponding resistance gene aadA. The constructs remained in ptDNA for several months after introduction even under non-selective condition. The transformants normally flowered and are fertile in most cases. The offspring of the transformants (the T₁ generation) retained the integrated construct DNA in their ptDNA, as indicated by PCR and DNA blotting, and expressed GFP in plastids from the integrated construct DNA. In summary, we successfully used the fusion peptide method for integration of foreign DNA in tobacco, rice, and kenaf ptDNA, and the integrated DNA was transmitted to the next generations. Whereas optimization is necessary to obtain homoplasmic plastid transformants that enable stable heterologous expression of genes, the plastid transformation method shown here is a novel nanomaterial-based approach distinct from the conventional methods, and we propose that this easy method could be used to target a wide variety of plants.

Engineering microalgae: transition from empirical design to programmable cells

Domesticated microalgae hold great promise for the sustainable provision of various bioresources for human domestic and industrial consumption. Efforts to exploit their potential are far from being fully realized due to limitations in the know-how of microalgal engineering. The associated technologies are not as well developed as those for heterotrophic microbes, cyanobacteria, and plants. However, recent studies on microalgal metabolic engineering, genome editing, and synthetic biology have immensely helped to enhance transformation efficiencies and are bringing new insights into this field. Therefore, this article, summarizes recent developments in microalgal biotechnology and examines the prospects for generating specialty and commodity products through the processes of metabolic engineering and synthetic biology. After a brief examination of empirical engineering methods and vector design, this article focuses on quantitative transformation cassette design, elaborates on target editing methods and emerging digital design of algal cellular metabolism to arrive at high yields of valuable products. These advances have enabled a transition of manners in microalgal engineering from single-gene and enzyme-based metabolic engineering to systems-level precision engineering, from cells created with genetically modified (GM) tags to that without GM tags, and ultimately from proof of concept to tangible industrial applications. Finally, future trends are proposed in microalgal engineering, aiming to establish individualized transformation systems in newly identified species for strain-specific specialty and commodity products, while developing sophisticated universal toolkits in model algal species.

Imaging of the Entry Pathway of a Cell-Penetrating Peptide-DNA Complex From the Extracellular Space to Chloroplast Nucleoids Across Multiple Membranes in Arabidopsis Leaves

Each plant cell has hundreds of copies of the chloroplast genome and chloroplast transgenes do not undergo silencing. Therefore, chloroplast transformation has many powerful potential agricultural and industrial applications. We previously succeeded in integrating exogenous genes into the chloroplast genome using peptide-DNA complexes composed of plasmid DNA and a fusion peptide consisting of a cell-penetrating peptide (CPP) and a chloroplast transit peptide (cpPD complex). However, how cpPD complexes are transported into the chloroplast from outside the cell remains unclear. Here, to characterize the route by which these cpPD complexes move into chloroplasts, we tracked their movement from the extracellular space to the chloroplast stroma using a fluorescent label and confocal laser scanning microscopy (CLSM). Upon infiltration of cpPD complexes into the extracellular space of Arabidopsis thaliana leaves, the complexes reached the chloroplast surface within 6h. The cpPD complexes reached were engulfed by the chloroplast outer envelope membrane and gradually integrated into the chloroplast. We detected several cpPD complexes localized around chloroplast nucleoids and observed the release of DNA from the cpPD. Our results thus define the route taken by the cpPD complexes for gene delivery from the extracellular space to the chloroplast stroma.

Generation, analysis, and transformation of macro-chloroplast Potato (Solanum tuberosum) lines for chloroplast biotechnology

Chloroplast biotechnology is a route for novel crop metabolic engineering. The potential bio-confinement of transgenes, the high protein expression and the possibility to organize genes into operons represent considerable advantages that make chloroplasts valuable targets in agricultural biotechnology. In the last 3 decades, chloroplast genomes from a few economically important crops have been successfully transformed. The main bottlenecks that prevent efficient transformation in a greater number of crops include the dearth of proven selectable marker gene-selection combinations and tissue culture methods for efficient regeneration of transplastomic plants. The prospects of increasing organelle size are attractive from several perspectives, including an increase in the surface area of potential targets. As a proof-of-concept, we generated Solanum tuberosum (potato) macro-chloroplast lines overexpressing the tubulin-like GTPase protein gene FtsZ1 from Arabidopsis thaliana. Macro-chloroplast lines exhibited delayed growth at anthesis; however, at the time of harvest there was no significant difference in height between macro-chloroplast and wild-type lines. Macro-chloroplasts were successfully transformed by biolistic DNA-delivery and efficiently regenerated into homoplasmic transplastomic lines. We also demonstrated that macro-chloroplasts accumulate the same amount of heterologous protein than wild-type organelles, confirming efficient usage in plastid engineering. Advantages and limitations of using enlarge compartments in chloroplast biotechnology are discussed.

Inaccessibility to double-stranded RNAs in plastids restricts RNA interference in Bemisia tabaci (whitefly)

BACKGROUND

RNA interference (RNAi) has emerged as a promising technology for insect pest control. Because of the accumulation of high levels of long double-stranded RNAs (dsRNAs) in plastids, it was previously shown that expression of dsRNAs from plastid genome led to higher mortality of some insect pests with chewing mouthparts than dsRNAs expression from nuclear genome. However, whether plastid-expressed dsRNAs have effects on phloem sap-sucking pests is unknown. In this study, we compared the RNAi effects of nuclear transgenic and transplastomic plants on the whitefly Bemisia tabaci, a serious sap-sucking pest.

RESULTS

Nuclear transgenic and transplastomic tobacco plants were developed for the expression of dsRNA against BtACTB gene of Bemisia tabaci, respectively. Feeding nuclear transgenic plants to Bemisia tabaci resulted in reduced gene expression of BtACTB and survival rate, and impaired fecundity of Bemisia tabaci. We did not observe any effects of transplastomic plants on Bemisia tabaci fitness. Furthermore, we found that the inability of B. tabaci to obtain dsRNAs from plastids might restrict its RNAi responses.

CONCLUSION

Our study indicated that the expression of dsRNAs in nuclear transgenic plants was more effective than that in transplastomic plants for the control of Bemisia tabaci. The inaccessibility of Bemisia tabaci to plastids contributes to the inefficiency of plastid-mediated RNAi. Our findings are of great significance to future optimization of transgenically delivered RNAi approaches for efficient controlling of sap-sucking pests. © 2020 Society of Chemical Industry.

Chloroplast-selective gene delivery and expression in planta using chitosan-complexed single-walled carbon nanotube carriers

Plant genetic engineering is an important tool used in current efforts in crop improvement, pharmaceutical product biosynthesis and sustainable agriculture. However, conventional genetic engineering techniques target the nuclear genome, prompting concerns about the proliferation of foreign genes to weedy relatives. Chloroplast transformation does not have this limitation, since the plastid genome is maternally inherited in most plants, motivating the need for organelle-specific and selective nanocarriers. Here, we rationally designed chitosan-complexed single-walled carbon nanotubes, utilizing the lipid exchange envelope penetration mechanism. The single-walled carbon nanotubes selectively deliver plasmid DNA to chloroplasts of different plant species without external biolistic or chemical aid. We demonstrate chloroplast-targeted transgene delivery and transient expression in mature Eruca sativa, Nasturtium officinale, Nicotiana tabacum and Spinacia oleracea plants and in isolated Arabidopsis thaliana mesophyll protoplasts. This nanoparticle-mediated chloroplast transgene delivery tool provides practical advantages over current delivery techniques as a potential transformation method for mature plants to benefit plant bioengineering and biological studies.

Engineering the Chloroplast Genome of Oleaginous Marine Microalga Nannochloropsis oceanica

Plastid engineering offers an important tool to fill the gap between the technical and the enormous potential of microalgal photosynthetic cell factory. However, to date, few reports on plastid engineering in industrial microalgae have been documented. This is largely due to the small cell sizes and complex cell-wall structures which make these species intractable to current plastid transformation methods (i.e., biolistic transformation and polyethylene glycol-mediated transformation). Here, employing the industrial oleaginous microalga Nannochloropsis oceanica as a model, an electroporation-mediated chloroplast transformation approach was established. Fluorescent microscopy and laser confocal scanning microscopy confirmed the expression of the green fluorescence protein, driven by the endogenous plastid promoter and terminator. Zeocin-resistance selection led to an acquisition of homoplasmic strains of which a stable and site-specific recombination within the chloroplast genome was revealed by sequencing and DNA gel blotting. This demonstration of electroporation-mediated chloroplast transformation opens many doors for plastid genome editing in industrial microalgae, particularly species of which the chloroplasts are recalcitrant to chemical and microparticle bombardment transformation.

Synthetic Botany

Plants are attractive platforms for synthetic biology and metabolic engineering. Plants' modular and plastic body plans, capacity for photosynthesis, extensive secondary metabolism, and agronomic systems for large-scale production make them ideal targets for genetic reprogramming. However, efforts in this area have been constrained by slow growth, long life cycles, the requirement for specialized facilities, a paucity of efficient tools for genetic manipulation, and the complexity of multicellularity. There is a need for better experimental and theoretical frameworks to understand the way genetic networks, cellular populations, and tissue-wide physical processes interact at different scales. We highlight new approaches to the DNA-based manipulation of plants and the use of advanced quantitative imaging techniques in simple plant models such as Marchantia polymorpha. These offer the prospects of improved understanding of plant dynamics and new approaches to rational engineering of plant traits.

The CRISPR-Cas9 technology: Closer to the ultimate toolkit for targeted genome editing

The first period of plant genome editing was based on Agrobacterium; chemical mutagenesis by EMS (ethyl methanesulfonate) and ionizing radiations; each of these technologies led to randomly distributed genome modifications. The second period is associated with the discoveries of homing and meganuclease enzymes during the 80s and 90s, which were then engineered to provide efficient tools for targeted editing. From 2006 to 2012, a few crop plants were successfully and precisely modified using zinc-finger nucleases. A third wave of improvement in genome editing, which led to a dramatic decrease in off-target events, was achieved in 2009-2011 with the TALEN technology. The latest revolution surfaced in 2013 with the CRISPR-Cas9 system, whose high efficiency and technical ease of use is really impressive; scientists can use in-house kits or commercially available kits; the only two requirements are to carefully choose the location of the DNA double strand breaks to be induced and then to order an oligonucleotide. While this close-to- ultimate toolkit for targeted editing of genomes represents dramatic scientific progress which allows the development of more complex useful agronomic traits through synthetic biology, the social acceptance of genome editing remains regularly questioned by anti-GMO citizens and organizations.

Establishing Chlamydomonas reinhardtii as an industrial biotechnology host

Microalgae constitute a diverse group of eukaryotic unicellular organisms that are of interest for pure and applied research. Owing to their natural synthesis of value-added natural products microalgae are emerging as a source of sustainable chemical compounds, proteins and metabolites, including but not limited to those that could replace compounds currently made from fossil fuels. For the model microalga, Chlamydomonas reinhardtii, this has prompted a period of rapid development so that this organism is poised for exploitation as an industrial biotechnology platform. The question now is how best to achieve this? Highly advanced industrial biotechnology systems using bacteria and yeasts were established in a classical metabolic engineering manner over several decades. However, the advent of advanced molecular tools and the rise of synthetic biology provide an opportunity to expedite the development of C. reinhardtii as an industrial biotechnology platform, avoiding the process of incremental improvement. In this review we describe the current status of genetic manipulation of C. reinhardtii for metabolic engineering. We then introduce several concepts that underpin synthetic biology, and show how generic parts are identified and used in a standard manner to achieve predictable outputs. Based on this we suggest that the development of C. reinhardtii as an industrial biotechnology platform can be achieved more efficiently through adoption of a synthetic biology approach.

Engineering plastid genomes: methods, tools, and applications in basic research and biotechnology

The small bacterial-type genome of the plastid (chloroplast) can be engineered by genetic transformation, generating cells and plants with transgenic plastid genomes, also referred to as transplastomic plants. The transformation process relies on homologous recombination, thereby facilitating the site-specific alteration of endogenous plastid genes as well as the precisely targeted insertion of foreign genes into the plastid DNA. The technology has been used extensively to analyze chloroplast gene functions and study plastid gene expression at all levels in vivo. Over the years, a large toolbox has been assembled that is now nearly comparable to the techniques available for plant nuclear transformation and that has enabled new applications of transplastomic technology in basic and applied research. This review describes the state of the art in engineering the plastid genomes of algae and land plants (Embryophyta). It provides an overview of the existing tools for plastid genome engineering, discusses current technological limitations, and highlights selected applications that demonstrate the immense potential of chloroplast transformation in several key areas of plant biotechnology.

Plastid transformation in lettuce (Lactuca sativa L.) by polyethylene glycol treatment of protoplasts

A detailed protocol for PEG-mediated plastid transformation of Lactuca sativa cv. Flora, using leaf protoplasts, is described. Successful plastid transformation using protoplasts requires a large number of viable cells, high plating densities, and an efficient regeneration system. Transformation was achieved using a vector that targets genes to the trnI/trnA intergenic region of the lettuce plastid genome. The aadA gene, encoding an adenylyltransferase enzyme that confers spectinomycin resistance, was used as a selectable marker. With the current method, the expected transformation frequency is 1-2 spectinomycin-resistant cell lines per 10(6) viable protoplasts. Fertile, diploid, homoplasmic, plastid-transformed lines were obtained. Transmission of the plastid-encoded transgene to the T1 generation was demonstrated.

Plastid transformation in tomato

Tomato (Solanum lycopersicum) is one of the most important vegetable crops and has long been an important model species in plant biology. Plastid biology in tomato is especially interesting due to the chloroplast-to-chromoplast conversion occurring during fruit ripening. Moreover, as tomato represents a major food crop with an edible fruit that can be eaten raw, the development of a plastid transformation protocol for tomato was of particular interest to plant biotechnology. Recent methodological improvements have made tomato plastid transformation more efficient and facilitated applications in metabolic engineering and molecular farming. This article describes the basic methods involved in the generation and analysis of tomato plants with transgenic chloroplast genomes and summarizes current applications of tomato plastid transformation.

Nicotiana tabacum: PEG-mediated plastid transformation

Stable plastid transformation in Nicotiana tabacum has been achieved by using two different methods, the biolistic method, using a particle gun, and the polyethylene glycol (PEG)-mediated transformation. PEG-mediated plastid transformation involves the treatment of isolated protoplasts (plant cells without cell wall) with PEG in the presence of DNA. We have previously shown that in Nicotiana tabacum both methods are equally efficient. The PEG-mediated transformation efficiencies range between 20 and 50 plastid transformants per experiment (10(6) viable treated protoplasts). One advantage of the PEG method is that no expensive equipment such as a particle gun is required. The only crucial points are the handling and the cultivation of protoplasts. Furthermore, markers for the selection of transformed chloroplasts are required. One of the most often used selection markers is the aadA gene which encodes for spectinomycin and streptomycin resistance. Here we describe a simplified and inexpensive protocol for the transformation of chloroplasts in Nicotiana tabacum using an optimized protoplast culture protocol.

A novel chloroplast transformation vector compatible with the Gateway(®) recombination cloning technology

To analyze the suitability of Gateway(®) vectors for transformation of chloroplasts, we converted a standard plastid transformation vector into a Gateway(®) destination vector containing the necessary recombination sites attR1 and attR2. Insertion of the green fluorescent protein (GFP) coding sequence with associated T7g10 ribosome binding site into this destination vector created the expression vector for transformation of tobacco chloroplasts with the biolistic method. Correct integration of the transgene into the plastid genome was verified by PCR and the homoplasmic nature of the transformed plants was confirmed by Southern Blot analysis. Expression of the GFP reporter protein was monitored by confocal laser scanning microscopy (CLSM) and quantification by western blot analysis showed a GFP accumulation level of 3% total soluble protein (TSP). The presented results clearly demonstrate that the Gateway(®) recombination sites are compatible with all steps of plastid transformation, from generation of transplastomic plants to expression of GFP. This is the first report of a plastid transformation vector made by the Gateway(®) recombinant cloning technology, which proves the suitability of this system for use in chloroplasts.

Improvement of vitamin E quality and quantity in tobacco and lettuce by chloroplast genetic engineering

Vitamin E (tocopherol: Toc) is an important lipid-soluble antioxidant synthesized in chloroplasts. Among the 8 isoforms of vitamin E, α-Toc has the highest activity in humans. To generate transgenic plants with enhanced vitamin E activity, we applied a chloroplast transformation technique. Three types of the transplastomic tobacco plants (pTTC, pTTMT and pTTC-TMT) carrying the Toc cyclase (TC) or γ-Toc methyltransferase (γ-TMT) gene and the TC plus γ-TMT genes as an operon in the plastid genome, respectively, were generated. There was a significant increase in total levels of Toc due to an increase in γ-Toc in the pTTC plants. Compared to the wild-type plants, Toc composition was altered in the pTTMT plants. In the pTTC-TMT plants, total Toc levels increased and α-Toc was a major Toc isoform. Furthermore, to use chloroplast transformation to produce α-Toc-rich vegetable, TC-overexpressing transplastomic lettuce plants (pLTC) were generated. Total Toc levels and vitamin E activity increased in the pLTC plants compared with the wild-type lettuce plants. These findings indicated that chloroplast genetic engineering is useful to improve vitamin E quality and quantity in plants.

Chloroplast transformation for engineering of photosynthesis

Many efforts are underway to engineer improvements in photosynthesis to meet the challenges of increasing demands for food and fuel in rapidly changing environmental conditions. Various transgenes have been introduced into either the nuclear or plastid genomes in attempts to increase photosynthetic efficiency. We examine the current knowledge of the critical features that affect levels of expression of plastid transgenes and protein accumulation in transplastomic plants, such as promoters, 5' and 3' untranslated regions, RNA-processing sites, translation signals and amino acid sequences that affect protein turnover. We review the prior attempts to manipulate the properties of ribulose-1,5-bisphosphate carboxylase oxygenase (Rubisco) through plastid transformation. We illustrate how plastid operons could be created for expression of the multiple genes needed to introduce new pathways or enzymes to enhance photosynthetic rates or reduce photorespiration. We describe here the past accomplishments and future prospects for manipulating plant enzymes and pathways to enhance carbon assimilation through plastid transformation.

Spectinomycin resistance mutations in the rrn16 gene are new plastid markers in Medicago sativa

We report here the isolation of spectinomycin-resistant mutants in cultured cells of Medicago sativa line RegenSY-T2. Spectinomycin induces bleaching of cultured alfalfa cells due to inhibition of protein synthesis on the prokaryotic type 70S plastid ribosomes. Spontaneous mutants resistant to spectinomycin bleaching were identified by their ability to form green shoots on plant regeneration medium containing selective spectinomycin concentrations in the range of 25-50 mg/l. Sequencing of the plastid rrn16 gene revealed that spectinomycin resistance is due to mutations in a conserved stem structure of the 16S rRNA. Resistant plants transferred to the greenhouse developed normally and produced spectinomycin-resistant seed progeny. In light of their absence in soybean, a related leguminous plant, the isolation of spectinomycin-resistant mutants in M. sativa was unexpected. The new mutations are useful for the study of plastid inheritance, as demonstrated by detection of predominantly paternal plastid inheritance in the RegenSY-T2 × Szapko57 cross, and can be used as selective markers in plastid transformation vectors to obtain cisgenic plants.

In vivo analysis of RNA editing in plastids

mRNA editing in plastids (chloroplasts) of higher plants proceeds by cytidine-to-uridine conversion at highly specific sites. Editing sites are recognized by the interplay of cis-acting elements at the RNA level and site-specific trans-acting protein factors that are believed to bind to the cis-elements in a sequence-specific manner. The C-to-U editing enzyme, a presumptive cytidine deaminase acting on polynucleotides, is still unknown. The development of methods for the stable genetic transformation of the plastid genome in higher plants has facilitated the analysis of RNA editing in vivo. Plastid transformation has been extensively used to define the sequence requirements for editing site selection and to address questions about editing site evolution. This chapter describes the basic methods involved in the generation and analysis of plants with transgenic chloroplast genomes and summarizes the applications of plastid transformation in editing research.

Engineering the plastid genome of Nicotiana sylvestris, a diploid model species for plastid genetics

The plastids of higher plants have their own ∼120-160-kb genome that is present in 1,000-10,000 copies per cell. Engineering of the plastid genome (ptDNA) is based on homologous recombination between the plastid genome and cloned ptDNA sequences in the vector. A uniform population of engineered ptDNA is obtained by selection for marker genes encoded in the vectors. Manipulations of ptDNA include (1) insertion of transgenes in intergenic regions; (2) posttransformation excision of marker genes to obtain marker-free plants; (3) gene knockouts and gene knockdowns, and (4) cotransformation with multiple plasmids to introduce nonselected genes without physical linkage to marker genes. Most experiments on plastome engineering have been carried out in the allotetraploid Nicotiana tabacum. We report here for the first time plastid transformation in Nicotiana sylvestris, a diploid ornamental species. We demonstrate that the protocols and vectors developed for plastid transformation in N. tabacum are directly applicable to N. sylvestris with the advantage that the N. sylvestris transplastomic lines are suitable for mutant screens.

Chloroplasts as expression platforms for plant-produced vaccines

Production of recombinant subunit vaccines from genes incorporated in the plastid genome is advantageous because of the attainable expression level due to high transgene copy number and the absence of gene silencing; biocontainment as a consequence of maternal inheritance of plastids and no transgene presence in the pollen; and expression of multiple transgenes in prokaryotic-like operons. We discuss the core technology of plastid transformation in Chlamydomonas reinhardtii, a unicellular alga, and Nicotiana tabacum (tobacco), a flowering plant species, and demonstrate the utility of the technology for the production of recombinant vaccine antigens.

Advances in chloroplast engineering

The chloroplast is a pivotal organelle in plant cells and eukaryotic algae to carry out photosynthesis, which provides the primary source of the world's food. The expression of foreign genes in chloroplasts offers several advantages over their expression in the nucleus: high-level expression, transgene stacking in operons and a lack of epigenetic interference allowing stable transgene expression. In addition, transgenic chloroplasts are generally not transmitted through pollen grains because of the cytoplasmic localization. In the past two decades, great progress in chloroplast engineering has been made. In this paper, we review and highlight recent studies of chloroplast engineering, including chloroplast transformation procedures, controlled expression of plastid transgenes in plants, the expression of foreign genes for improvement of plant traits, the production of biopharmaceuticals, metabolic pathway engineering in plants, plastid transformation to study RNA editing, and marker gene excision system.

Transient gene expression in guard cell chloroplasts of tobacco using ArF excimer laser microablation

In this paper, we report a novel method for delivering genes into chloroplasts of tobacco cells using laser microablation. The plasmid pLD200-GFP was introduced into chloroplasts of Nicotiana tabacum cv. Xanthi guard cells and transient GFP expression was detected in the chloroplasts after 2-3 d of incubation. The technique uses an argon fluoride (ArF) excimer laser to perforate the cell surface in a 4 mum(2) area in the presence of plasmid coated gold microparticles. Pretreatment of guard cells to promote stomatal closure prior to laser ablation resulted in a significant increase in the survival rate of cells and a transient expression rate of 2-3% in trial number basis was archived. Our method has unique advantages such as avoiding laborious pretreatments that adversely affect cell viability and specific delivery of transgenes into a desired cell in complex leaf tissue. This technique is a potential tool for cell specific transient gene expression studies for elucidation of gene regulation and expression.

Genetic transformation of the sugar beet plastome

It is very important for the application of chloroplast engineering to extend the range of species in which this technology can be achieved. Here, we describe the development of a chloroplast transformation system for the sugar beet (Beta vulgaris L. ssp. vulgaris, Sugar Beet Group) by biolistic bombardment of leaf petioles. Homoplasmic plastid-transformed plants of breeding line Z025 were obtained. Transformation was achieved using a vector that targets genes to the rrn16/rps12 intergenic region of the sugar beet plastome, employing the aadA gene as a selectable marker against spectinomycin and the gfp gene for visual screening of plastid transformants. gfp gene transcription and protein expression were shown in transplastomic plants. Detection of GFP in Comassie blue-stained gels suggested high GFP levels. Microscopy revealed GFP fluorescence within the chloroplasts. Our results demonstrate the feasibility of engineering the sugar beet chloroplast genome; this technology provides new opportunities for the genetic improvement of this crop and for social acceptance of genetically modified sugar beet plants.

A protocol for expression of foreign genes in chloroplasts

Several major costs associated with the production of biopharmaceuticals or vaccines in fermentation-based systems could be minimized by using plant chloroplasts as bioreactors, which facilitates rapid scale-up. Oral delivery of chloroplast-derived therapeutic proteins through plant cells eliminates expensive purification steps, low temperature storage, transportation and sterile injections for their delivery. Chloroplast transformation technology (CTT) has also been successfully used to engineer valuable agronomic traits and for the production of industrial enzymes and biomaterials. Here, we provide a detailed protocol for the construction of chloroplast expression and integration vectors, selection and regeneration of transformants, evaluation of transgene integration and inheritance, confirmation of transgene expression and extraction, and quantitation and purification of foreign proteins. Integration of appropriate transgenes into chloroplast genomes and the resulting high levels of functional protein expression can be achieved in approximately 6 months in lettuce and tobacco. CTT is eco-friendly because transgenes are maternally inherited in most crop plants.

The genetic transformation of plastids

Biolistic delivery of DNA initiated plastid transformation research and still is the most widelyused approach to generate transplastomic lines in both algae and higher plants. The principal designof transformation vectors is similar in both phylogenetic groups. Although important additions tothe list of species transformed in their plastomes have been made in algae and in higher plants, thekey organisms in the area are still the two species, in which stable plastid transformation was initiallysuccessful, i.e., Chlamydomonas reinhardtii and tobacco. Basicresearch into organelle biology has substantially benefited from the homologous recombination-basedcapability to precisely insert at predetermined loci, delete, disrupt, or exchange plastid genomesequences. Successful expression of recombinant proteins, including pharmaceutical proteins, hasbeen demonstrated in Chlamydomonas as well as in higher plants,where some interesting agronomic traits were also engineered through plastid transformation.

Simple and efficient plastid transformation system for the liverwort Marchantia polymorpha L. suspension-culture cells

We have established a simple and efficient plastid transformation system for liverwort, Marchantia polymorpha L., suspension-culture cells, which are homogenous, chloroplast-rich and rapidly growing. Plasmid pCS31 was constructed to integrate an aadA expression cassette for spectinomycin-resistance into the trnI-trnA intergenic region of the liverwort plastid DNA by homologous recombination. Liverwort suspension-culture cells were bombarded with pCS31-coated gold projectiles and selected on a medium containing spectinomycin. Plastid transformants were reproducibly isolated from the obtained spectinomycin-resistant calli. Selection on a sucrose-free medium greatly improved the efficiency of selection of plastid transformants. Homoplasmic plastid transformant lines were established by successive subculturing for 14 weeks or longer on the spectinomycin-containing medium. The plastid transformation system of liverwort suspension-culture cells should facilitate the investigation of the fundamental genetic systems of plastid DNA, such as replication.

Plant protoplasts: status and biotechnological perspectives

Plant protoplasts ("naked" cells) provide a unique single cell system to underpin several aspects of modern biotechnology. Major advances in genomics, proteomics, and metabolomics have stimulated renewed interest in these osmotically fragile wall-less cells. Reliable procedures are available to isolate and culture protoplasts from a range of plants, including both monocotyledonous and dicotyledonous crops. Several parameters, particularly the source tissue, culture medium, and environmental factors, influence the ability of protoplasts and protoplast-derived cells to express their totipotency and to develop into fertile plants. Importantly, novel approaches to maximise the efficiency of protoplast-to-plant systems include techniques already well established for animal and microbial cells, such as electrostimulation and exposure of protoplasts to surfactants and respiratory gas carriers, especially perfluorochemicals and hemoglobin. However, despite at least four decades of concerted effort and technology transfer between laboratories worldwide, many species still remain recalcitrant in culture. Nevertheless, isolated protoplasts are unique to a range of experimental procedures. In the context of plant genetic manipulation, somatic hybridisation by protoplast fusion enables nuclear and cytoplasmic genomes to be combined, fully or partially, at the interspecific and intergeneric levels to circumvent naturally occurring sexual incompatibility barriers. Uptake of isolated DNA into protoplasts provides the basis for transient and stable nuclear transformation, and also organelle transformation to generate transplastomic plants. Isolated protoplasts are also exploited in numerous miscellaneous studies involving membrane function, cell structure, synthesis of pharmaceutical products, and toxicological assessments. This review focuses upon the most recent developments in protoplast-based technologies.

Plastid transformation in higher plants

Plastids of higher plants are semi-autonomous organelles with a small, highly polyploid genome and their own transcription-translation machinery. This review provides an overview of the technology for the genetic modification of the plastid genome including: vectors, marker genes and gene design, the use of gene knockouts and over-expression to probe plastid function and the application of site-specific recombinases for excision of target DNA. Examples for applications in basic science include the study of plastid gene transcription, mRNA editing, photosynthesis and evolution. Examples for biotechnological applications are incorporation of transgenes in the plastid genome for containment and high-level expression of recombinant proteins for pharmaceutical and industrial applications. Plastid transformation is routine only in tobacco. Progress in implementing the technology in other crops is discussed.

Factors affecting the genetic engineering of plants by microprojectile bombardment

Since its development in the mid-1980s, microprojectile bombardment has been widely employed as a method for direct gene transfer into a wide range of plants, including the previously difficult-to-transform monocotyledonous species. Although the numerous instruments available for microprojectile-mediated gene delivery and their applications have been widely discussed, less attention has been paid to the critical factors which affect the efficiency of this method of gene delivery. In this review we do not wish to describe the array of devices used for microprojectile delivery or their uses which have already been definitively described, but instead wish to report on research developments investigating the factors which affect microprojectile-mediated transformation of plants.

Persistence of unselected transgenic DNA during a plastid transformation and segregation approach to herbicide resistance

The use of a nonlethal selection scheme, most often using the aadA gene that confers resistance to spectinomycin and streptomycin, has been considered critical for recovery of plastid transformation events. In this study, the plastid-lethal markers, glyphosate or phosphinothricin herbicides, were used to develop a selection scheme for plastids that circumvents the need for integration of an antibiotic resistance marker. The effect of selective agents on tobacco (Nicotiana tabacum) mesophyll chloroplasts was first examined by transmission electron microscopy. We found that at concentrations typically used for selection of nuclear transformants, herbicides caused rapid disintegration of plastid membranes, whereas antibiotics had no apparent effect. To overcome this apparent herbicide lethality to plastids, a "transformation segregation" scheme was developed that used two independent transformation vectors for a cotransformation approach and two different selective agents in a phased selection scheme. One transformation vector carried an antibiotic resistance (aadA) marker used for early nonlethal selection, and the other transformation vector carried the herbicide (CP4 or bar) resistance marker for use in a subsequent lethal selection phase. Because the two markers were carried on separate plasmids and were targeted to different locations on the plastid genome, we reasoned that segregation of the two markers in some transplastomic lines could occur. We report here a plastid cotransformation frequency of 50% to 64%, with a high frequency (20%) of these giving rise to transformation segregants containing exclusively the initially nonselected herbicide resistance marker. Our studies indicate a high degree of persistence of unselected transforming DNA, providing useful insights into plastid chromosome dynamics.

Homologous recombination and gene targeting in plant cells

Gene targeting has become an indispensable tool for functional genomics in yeast and mouse; however, this tool is still missing in plants. This review discusses the gene targeting problem in plants in the context of general knowledge on recombination and gene targeting. An overview on the history of gene targeting is followed by a general introduction to genetic recombination of bacteria, yeast, and vertebrates. This abridged discussion serves as a guide to the following sections, which cover plant-specific aspects of recombination assay systems, the mechanism of recombination, plant recombination genes, the relationship of recombination to the environment, approaches to stimulate homologous recombination and gene targeting, and a description of two plant systems, the moss Physcomitrella patens and the chloroplast, that naturally have high efficiencies of gene targeting. The review concludes with a discussion of alternatives to gene targeting.

Progress towards commercialization of plastid transformation technology

Tobacco chloroplasts are ready to be tested as a platform for the expression of recombinant proteins on a commercial scale. They hold the promise of reproducible yields of 5-25% of total soluble cellular protein in leaves and reliability has been achieved through refinement of an expression toolkit that includes vectors, recently developed expression cassettes and systems for marker gene removal. Implementation of plastid transformation technology in other crops, however, has met with difficulty and has delayed agronomic applications.

Transgenic plastids in basic research and plant biotechnology

Facile methods of genetic transformation are of outstanding importance for both basic and applied research. For many years, transgenic technologies for plants were restricted to manipulations of the nuclear genome. More recently, a second genome of the plant cell has become amenable to genetic engineering: the prokaryotically organized circular genome of the chloroplast. The possibility to directly manipulate chloroplast genome-encoded information has paved the way to detailed in vivo studies of virtually all aspects of plastid gene expression. Moreover, plastid transformation technologies have been intensely used in functional genomics by performing gene knockouts and site-directed mutageneses of plastid genes. These studies have contributed greatly to our understanding of the physiology and biochemistry of biogenergetic processes inside the plastid compartment. Plastid transformation technologies have also stirred considerable excitement among plant biotechnologists, since transgene expression from the plastid genome offers a number of most attractive advantages, including high-level foreign protein expression and transgene containment due to lack of pollen transmission. This review describes the generation of plants with transgenic plastids, summarizes our current understanding of the transformation process and highlights selected applications of transplastomic technologies in basic and applied research.

Protein expression in plastids

The genome of the plastid has generated much interest as a target for plant transformation. The characteristics of plastid transgenes both reflect the prokaryotic origin of plastid organelles and provide a unique set of features that are currently lacking in genes introduced into the plant nucleus. Recent progress has been made in understanding plastid expression of recombinant proteins.

Genetic engineering of the chloroplast

Transformation of the plastid genome has a number of inherent advantages for the engineering of gene expression in plants. These advantages include: 10-50 times higher transgene expression levels; the absence of gene silencing and position effect variation; the ability to express polycistronic messages from a single promoter; uniparental plastid gene inheritance in most crop plants that prevents pollen transmission of foreign DNA; integration via a homologous recombination process that facilitates targeted gene replacement and precise transgene control; and sequestration of foreign proteins in the organelle which prevents adverse interactions with the cytoplasmic environment. It is now 12 years since the first conclusive demonstration of stable introduction of cloned DNA into the Chlamydomonas chloroplast by the Boynton and Gillham laboratory, and 10 years since the laboratory of Pal Maliga successfully extended these approaches to tobacco. Since then, technical developments in plastid transformation and advances in our understanding of the rules of plastid gene expression have facilitated tremendous progress towards the goal of establishing the chloroplast as a feasible platform for genetic modification of plants.

Technical Advance: Stable chloroplast transformation in potato: use of green fluorescent protein as a plastid marker

We describe here the development of a reproducible plastid transformation system for potato and regeneration of plants with uniformly transformed plastids. Two distinct tobacco-specific plastid vectors, pZS197 (Prrn/aadA/TpsbA) and pMON30125 (Prrn/GFP/Trps16:PpsbA/aadA/TpsbA), designed for integration into the large single copy and inverted repeat regions of the plastid genome, respectively, were bombarded into leaf explants of potato line FL1607. A total of three transgenic lines were selected out of 46 plates bombarded with pZS197 and three transgenic lines out of 104 plates were obtained with pMON30125. Development of a high frequency leaf-based regenera- tion system, a stringent selection scheme and optimization of biolistic transformation protocol were critical for recovery of plastid transformants. Plastid-expressed green fluorescent protein was used as a visual marker for identification of plastid transformants at the early stage of selection and shoot regeneration. The establishment of a plastid transformation system in potato, which has several advantages over routinely used nuclear transformation, offers new possibilities for genetic improvement of this crop.