Encapsulated cell technology

Materials approaches for next-generation encapsulated cell therapies

Transplanted cells can act as living drug factories capable of secreting therapeutic proteins in vivo, with applications in the treatment of Type 1 diabetes (T1D), blood borne disease, vision disorders, and degenerative neural disease, potentially representing functional cures for chronic conditions. However, attack from the host immune system represents a major challenge, requiring chronic immunosuppression to enable long-lived cell transplantation in vivo. Encapsulating cells in engineered biomaterials capable of excluding components of the host immune system while allowing for the transport of therapeutic proteins, oxygen, nutrients, metabolites, and waste products represents a potential solution. However, the foreign-body response can lead to isolation from native vasculature and hypoxia leading to cell death. In this prospective article, we highlight materials-based solutions to three important challenges in the field: (i) improving biocompatibility and reducing fibrosis; (ii) enhancing transport of secreted protein drugs and key nutrients and oxygen via engineered, semipermeable membranes; and (iii) improving oxygenation. These efforts draw on several disciplines in materials' research, including polymer science, surfaces, membranes, biomaterials' microfabrication, and flexible electronics. If successful, these efforts could lead to new therapies for chronic disease and are a rich space for both fundamental materials' discovery and applied translational science.

Graphical Abstract

Nanomedicine in the Treatment of Diabetes

Nanomedicine could improve the treatment of diabetes by exploiting various therapeutic mechanisms through the use of suitable nanoformulations. For example, glucose-sensitive nanoparticles can release insulin in response to high glucose levels, mimicking the physiological release of insulin. Oral nanoformulations for insulin uptake via the gut represent a long-sought alternative to subcutaneous injections, which cause pain, discomfort, and possible local infection. Nanoparticles containing oligonucleotides can be used in gene therapy and cell therapy to stimulate insulin production in β-cells or β-like cells and modulate the responses of T1DM-associated immune cells. In contrast, viral vectors do not induce immunogenicity. Finally, in diabetic wound healing, local delivery of nanoformulations containing regenerative molecules can stimulate tissue repair and thus provide a valuable tool to treat this diabetic complication. Here, we describe these different approaches to diabetes treatment with nanoformulations and their potential for clinical application.

Calcium Orthophosphate (CaPO4) Containing Composites for Biomedical Applications: Formulations, Properties, and Applications

The goal of this review is to present a wide range of hybrid formulations and composites containing calcium orthophosphates (abbreviated as CaPO4) that are suitable for use in biomedical applications and currently on the market. The bioactive, biocompatible, and osteoconductive properties of various CaPO4-based formulations make them valuable in the rapidly developing field of biomedical research, both in vitro and in vivo. Due to the brittleness of CaPO4, it is essential to combine the desired osteologic properties of ceramic CaPO4 with those of other compounds to create novel, multifunctional bone graft biomaterials. Consequently, this analysis offers a thorough overview of the hybrid formulations and CaPO4-based composites that are currently known. To do this, a comprehensive search of the literature on the subject was carried out in all significant databases to extract pertinent papers. There have been many formulations found with different material compositions, production methods, structural and bioactive features, and in vitro and in vivo properties. When these formulations contain additional biofunctional ingredients, such as drugs, proteins, enzymes, or antibacterial agents, they offer improved biomedical applications. Moreover, a lot of these formulations allow cell loading and promote the development of smart formulations based on CaPO4. This evaluation also discusses basic problems and scientific difficulties that call for more investigation and advancements. It also indicates perspectives for the future.

Theranostic Advances of Bionanomaterials against Gestational Diabetes Mellitus: A Preliminary Review

Gestational diabetes mellitus (GDM) is the most frequent complication during pregnancy. This complex disease is characterized by glucose intolerance and consequent hyperglycemia that begins or is first diagnosed in pregnancy, and affects almost 7% of pregnant women. Previous reports have shown that GDM is associated with increased pregnancy complications and might cause abnormal fetal development. At present, treatments are not suitable for the prevention and management of these patients. As an alternative therapeutic opportunity and a leading scientific technique, nanotechnology has helped enlighten the health of these affected women. Theranostic nanomaterials with unique properties and small sizes (at least <100 nm in one of their dimensions) have been recently engineered for clinics and pharmaceutics. Reducing materials to the nanoscale has successfully changed their properties and enabled them to uniquely interact with cell biomolecules. Several biosensing methods have been developed to monitor glucose levels in GDM patients. Moreover, cerium oxide nanoparticles (NPs), selenium NPs, polymeric NPs, and drug-loaded NPs loaded with therapeutic agents have been used for GDM treatment. Still, there are some challenges associated with the detection limits and toxicity of such nanomaterials. This preliminary review covers the aspects from a fast-developing field to generating nanomaterials and their applications in GDM diagnosis and treatment.

Fabrication of monodisperse alginate microgel beads by microfluidic picoinjection: a chelate free approach

Micron-sized alginate hydrogel beads are extensively employed as an encapsulation medium for biochemical and biomedical applications. Here we report on the microfluidic assisted fabrication of calcium alginate (Ca-alginate) beads by on-chip picoinjection of aqueous calcium chloride (CaCl2) in emulsified aqueous sodium alginate (Na-alginate) droplets or by picoinjection of Na-alginate solution in emulsified aqueous CaCl2 droplets. There is no added chelator to reduce the Ca activity in either of the two strategies. The two fabrication strategies are implemented using a flow-focusing and picoinjection modules in a single PDMS chip. Aqueous alginate solution was emulsified and infused with CaCl2 solution as the squeezed droplet pass the picoinjection channel; consequently, monodisperse, spherical, and structurally homogeneous Ca-alginate beads were obtained. Monodisperse alginate microgel populations with a mean diameter in the range of 8 to 28 μm and standard deviation less than 1 μm were successfully generated using microfluidic channels with various dimensions and controlling the flow parameters. Monodisperse but also non-spherical particles with diameters 6 to 15 μm were also fabricated when picoinjecting Na-alginate solution in emulsified aqueous CaCl2 droplets. The Ca-alginate microbeads fabricated with tailormade size in the range from sub-cellular and upwards were in both strategies realized without any use of chelators or change in pH conditions, which is considered a significant advantage for further exploitation as encapsulation process for improved enzymatic activity and cell viability.

The Current Status of Bioartificial Pancreas Devices

Type 1 diabetes mellitus is a common and highly morbid disease for which there is no cure. Treatment primarily involves exogenous insulin administration, and, under specific circumstances, islet or pancreas transplantation. However, insulin replacement alone fails to replicate the endocrine function of the pancreas and does not provide durable euglycemia. In addition, transplantation requires lifelong use of immunosuppressive medications, which has deleterious side effects, is expensive, and is inappropriate for use in adolescents. A bioartificial pancreas that provides total endocrine pancreatic function without immunosuppression is a potential therapy for treatment of type 1 diabetes. Numerous models are in development and take different approaches to cell source, encapsulation method, and device implantation location. We review current therapies for type 1 diabetes mellitus, the requirements for a bioartificial pancreas, and quantitatively compare device function.

Biomaterials for Personalized Cell Therapy

Cell therapy has already had an important impact on healthcare and provided new treatments for previously intractable diseases. Notable examples include mesenchymal stem cells for tissue regeneration, islet transplantation for diabetes treatment, and T cell delivery for cancer immunotherapy. Biomaterials have the potential to extend the therapeutic impact of cell therapies by serving as carriers that provide 3D organization and support cell viability and function. With the growing emphasis on personalized medicine, cell therapies hold great potential for their ability to sense and respond to the biology of an individual patient. These therapies can be further personalized through the use of patient-specific cells or with precision biomaterials to guide cellular activity in response to the needs of each patient. Here, the role of biomaterials for applications in tissue regeneration, therapeutic protein delivery, and cancer immunotherapy is reviewed, with a focus on progress in engineering material properties and functionalities for personalized cell therapies.

Hope vs hype: where are we in type 1 diabetes?

Much progress has been made in type 1 diabetes research. Biological replacement of islet function has been achieved with pancreas transplantation and with islet transplantation. In the future, human embryonic stem cells and/or induced pluripotent stem cells may offer a potentially unlimited source of cells for islet replacement. Another potential strategy is to induce robust beta cell replication so that regeneration of islets can be achieved. Immune interventions are being studied with the hope of arresting the type 1 diabetes disease process to either prevent the disease or help preserve beta cell function. Mechanical replacement of islet cell function involves the use of glucose sensor-controlled insulin infusion systems. As all of these avenues are pursued, headlines often overstate the case, thus hyping any given advance, which provides enormous hope for patients and families seeking a cure for type 1 diabetes. Often, however, it is an animal study or a pilot trial that is being described. The reality is that translation to successful trials in human beings may not be readily achievable. This article discusses both the hype and the hopes in type 1 diabetes research.

Insulin secretion of mixed insulinoma aggregates-gelatin hydrogel microspheres after subcutaneous transplantation

Introduction

The objective of this study is to evaluate the insulin secretion of mixed aggregates of insulinoma cells (INS-1) and gelatin hydrogel microspheres after their subcutaneous transplantation.

Methods

Gelatin hydrogel microspheres were prepared by the conventional w/o emulsion method. Cell aggregates mixed with or without the hydrogel microspheres were encapsulated into a pouched-device of polytetrafluoroethylene membrane. An agarose hydrogel or MedGel™ incorporating basic fibroblast growth factor (bFGF) was subcutaneously implanted to induce vascularization. After the vascularization induction, cell aggregates encapsulated in the pouched-device was transplanted.

Results

The vascularization had the potential to enable transplanted cell aggregates to enhance the level of insulin secretion compared with those of no vascularization induction. In addition, the insulin secretion of cell aggregates was significantly promoted by the mixing of gelatin hydrogel microspheres even in the pouched-device encapsulated state.

Conclusion

It is possible that the microspheres mixing gives cells in aggregates better survival condition, resulting in promoted insulin secretion.

•

INS-1 cell aggregates incorporating gelatin hydrogel microspheres are prepared.

•

The ratio and number of cells and gelatin hydrogel microspheres affected the formation of cell aggregates.

•

Gelatin hydrogel microspheres incorporation improves glucose-induced insulin secretion of cell aggregates in vitro.

•

Gelatin hydrogel microspheres incorporation has the tendency to improve glucose-induced insulin secretion of cell aggregates in vivo.

•

Vascularization has the potential to improve cell function.

Toward Customized Extracellular Niche Engineering: Progress in Cell-Entrapment Technologies

The primary aim in tissue engineering is to repair, replace, and regenerate dysfunctional tissues to restore homeostasis. Cell delivery for repair and regeneration is gaining impetus with our understanding of constructing tissue-like environments. However, the perpetual challenge is to identify innovative materials or re-engineer natural materials to model cell-specific tissue-like 3D modules, which can seamlessly integrate and restore functions of the target organ. To devise an optimal functional microenvironment, it is essential to define how simple is complex enough to trigger tissue regeneration or restore cellular function. Here, the purposeful transition of cell immobilization from a cytoprotection point of view to that of a cell-instructive approach is examined, with advances in the understanding of cell-material interactions in a 3D context, and with a view to further application of the knowledge for the development of newer and complex hierarchical tissue assemblies for better examination of cell behavior and offering customized cell-based therapies for tissue engineering.

Microencapsulation of Cells Producing Therapeutic Proteins: Optimizing Cell Growth and Secretion

Microencapsulation of genetically engineered cells may have important applications as delivery systems for therapeutic proteins. However, optimization of the microcapsules with regard to mechanical stability, cell growth, and secretion of proteins is necessary in order to evaluate the future use of this delivery technology. We have explored the growth, survival, and secretion of therapeutic proteins from 293-EBNA cells producing endostatin (293 endo cells) and JJN3 myeloma cells producing hepatocyte growth factor (HGF) that have been embedded in various types of alginate capsules. Parameters that affect capsule integrity such as homogenous and inhomogenous gel cores and addition of an outer poly-l-lysine (PLL)–alginate coating were evaluated in relation to cell functions. When cells were encapsulated, the PLL layer was found to be absolutely required for the capsule integrity. The JJN3 and 293 endo cells displayed completely different growth and distribution patterns of live and dead cells within the microcapsules, as shown by 3D pictures reconstructed from images taken with confocal laser scanning microscopy (CLSM). Encapsulated JJN3 cells showed a bell-shaped growth and HGF secretion curve over a time period of 5 months. The 293 endo cells reached a plateau phase in growth after 23 days postencapsulation; however, after around 30 days a fraction of the microcapsules started to disintegrate. Microcapsule disintegration occurred with time irrespective of capsule and cell type, showing that alginate microcapsules possessing relatively high gel strength are not strong enough to keep proliferating cells within the microcapsules for prolonged time periods. Although this study shows that the stability of an alginate-based cell factory can be increased by a PLL–alginate coating, further improvement is necessary with regard to capsule integrity as well as controlling the cell growth before this technology can be used for therapy.

Cell Viability and Noninvasive In Vivo MRI Tracking of 3D Cell Encapsulating Self-Assembled Microcontainers

Several molecular therapies require the implantation of cells that secrete biotherapeutic molecules and imaging the location and microenvironment of the cellular implant to ascertain its function. We demonstrate noninvasive in vivo magnetic resonance imaging (MRI) of self-assembled microcontainers that are capable of cell encapsulation. Negative contrast was obtained to discern the microcontainer with MRI; positive contrast was obtained in the complete absence of background signal. MRI on a clinical scanner highlights the translational nature of this research. The microcontainers were loaded with cells that were dispersed in an extracellular matrix, and implanted both subcutaneously and in human tumor xenografts in SCID mice. MRI was performed on the implants, and microcontainers retrieved postimplantation showed cell viability both within and proximal to the implant. The microcontainers are characterized by their small size, three dimensionality, controlled porosity, ease of parallel fabrication, chemical and mechanical stability, and noninvasive traceability in vivo.

Encapsulated Islet Transplantation: Where Do We Stand?

Transplantation of pancreatic islets encapsulated within immuno-protective microcapsules is a strategy that has the potential to overcome graft rejection without the need for toxic immunosuppressive medication. However, despite promising preclinical studies, clinical trials using encapsulated islets have lacked long-term efficacy, and although generally considered clinically safe, have not been encouraging overall. One of the major factors limiting the long-term function of encapsulated islets is the host's immunological reaction to the transplanted graft which is often manifested as pericapsular fibrotic overgrowth (PFO). PFO forms a barrier on the capsule surface that prevents the ingress of oxygen and nutrients leading to islet cell starvation, hypoxia and death. The mechanism of PFO formation is still not elucidated fully and studies using a pig model have tried to understand the host immune response to empty alginate microcapsules. In this review, the varied strategies to overcome or reduce PFO are discussed, including alginate purification, altering microcapsule geometry, modifying alginate chemical composition, co-encapsulation with immunomodulatory cells, administration of pharmacological agents, and alternative transplantation sites. Nanoencapsulation technologies, such as conformal and layer-by-layer coating technologies, as well as nanofiber, thin-film nanoporous devices, and silicone based NanoGland devices are also addressed. Finally, this review outlines recent progress in imaging technologies to track encapsulated cells, as well as promising perspectives concerning the production of insulin-producing cells from stem cells for encapsulation.

Pig-to-Primate Islet Xenotransplantation: Past, Present, and Future

Islet allotransplantation results in increasing success in treating type 1 diabetes, but the shortage of deceased human donor pancreata limits progress. Islet xenotransplantation, using pigs as a source of islets, is a promising approach to overcome this limitation. The greatest obstacle is the primate immune/inflammatory response to the porcine (pig) islets, which may take the form of rapid early graft rejection (the instant blood-mediated inflammatory reaction) or T-cell-mediated rejection. These problems are being resolved by the genetic engineering of the source pigs combined with improved immunosuppressive therapy. The results of pig-to-diabetic nonhuman primate islet xenotransplantation are steadily improving, with insulin independence being achieved for periods >1 year. An alternative approach is to isolate islets within a micro- or macroencapsulation device aimed at protecting them from the human recipient's immune response. Clinical trials using this approach are currently underway. This review focuses on the major aspects of pig-to-primate islet xenotransplantation and its potential for treatment of type 1 diabetes.

Future Prospects for Scaffolding Methods and Biomaterials in Skin Tissue Engineering: A Review

Over centuries, the field of regenerative skin tissue engineering has had several advancements to facilitate faster wound healing and thereby restoration of skin. Skin tissue regeneration is mainly based on the use of suitable scaffold matrices. There are several scaffold types, such as porous, fibrous, microsphere, hydrogel, composite and acellular, etc., with discrete advantages and disadvantages. These scaffolds are either made up of highly biocompatible natural biomaterials, such as collagen, chitosan, etc., or synthetic materials, such as polycaprolactone (PCL), and poly-ethylene-glycol (PEG), etc. Composite scaffolds, which are a combination of natural or synthetic biomaterials, are highly biocompatible with improved tensile strength for effective skin tissue regeneration. Appropriate knowledge of the properties, advantages and disadvantages of various biomaterials and scaffolds will accelerate the production of suitable scaffolds for skin tissue regeneration applications. At the same time, emphasis on some of the leading challenges in the field of skin tissue engineering, such as cell interaction with scaffolds, faster cellular proliferation/differentiation, and vascularization of engineered tissues, is inevitable. In this review, we discuss various types of scaffolding approaches and biomaterials used in the field of skin tissue engineering and more importantly their future prospects in skin tissue regeneration efforts.

Treatment of diabetes with encapsulated pig islets: an update on current developments

The potential use of allogeneic islet transplantation in curing type 1 diabetes mellitus has been adequately demonstrated, but its large-scale application is limited by the short supply of donor islets and the need for sustained and heavy immunosuppressive therapy. Encapsulation of pig islets was therefore suggested with a view to providing a possible alternative source of islet grafts and avoiding chronic immunosuppression and associated adverse or toxic effects. Nevertheless, several vital elements should be taken into account before this therapy becomes a clinical reality, including cell sources, encapsulation approaches, and implantation sites. This paper provides a comprehensive review of xenotransplantation of encapsulated pig islets for the treatment of type 1 diabetes mellitus, including current research findings and suggestions for future studies.

Biomedical microelectromechanical systems (BioMEMS): Revolution in drug delivery and analytical techniques

Advancement in microelectromechanical system has facilitated the microfabrication of polymeric substrates and the development of the novel class of controlled drug delivery devices. These vehicles have specifically tailored three dimensional physical and chemical features which together, provide the capacity to target cell, stimulate unidirectional controlled release of therapeutics and augment permeation across the barriers. Apart from drug delivery devices microfabrication technology’s offer exciting prospects to generate biomimetic gastrointestinal tract models. BioMEMS are capable of analysing biochemical liquid sample like solution of metabolites, macromolecules, proteins, nucleic acid, cells and viruses. This review summarized multidisciplinary application of biomedical microelectromechanical systems in drug delivery and its potential in analytical procedures.

Progress and challenges in macroencapsulation approaches for type 1 diabetes (T1D) treatment: Cells, biomaterials, and devices

Macroencapsulation technology has been an attractive topic in the field of treatment for Type 1 diabetes due to mechanical stability, versatility, and retrievability of the macro-capsule design. Macro-capsules can be categorized into extravascular and intravascular devices, in which solute transport relies either on diffusion or convection, respectively. Failure of macroencapsulation strategies can be due to limited regenerative capacity of the encased insulin-producing cells, sub-optimal performance of encapsulation biomaterials, insufficient immunoisolation, excessive blood thrombosis for vascular perfusion devices, and inadequate modes of mass transfer to support cell viability and function. However, significant technical advancements have been achieved in macroencapsulation technology, namely reducing diffusion distance for oxygen and nutrients, using pro-angiogenic factors to increase vascularization for islet engraftment, and optimizing membrane permeability and selectivity to prevent immune attacks from host's body. This review presents an overview of existing macroencapsulation devices and discusses the advances based on tissue-engineering approaches that will stimulate future research and development of macroencapsulation technology. Biotechnol. Bioeng. 2016;113: 1381-1402. © 2015 Wiley Periodicals, Inc.

New Therapeutic Approaches in Diabetic Retinopathy

Diabetic retinopathy is a common microvascular complication of diabetes mellitus. It affects a substantial proportion of US adults over age 40. The condition is a leading cause of visual loss. Much attention has been given to expanding the role of current treatments along with investigating various novel therapies and drug delivery methods. In the treatment of diabetic macular edema (DME), intravitreal pharmacotherapies, especially anti-vascular endothelial growth factor (anti-VEGF) agents, have gained popularity. Currently, anti-VEGF agents are often used as first-line agents in center-involved DME, with recent data suggesting that among these agents, aflibercept leads to better visual outcomes in patients with worse baseline visual acuities. While photocoagulation remains the standard treatment for proliferative diabetic retinopathy (PDR), recent FDA approvals of ranibizumab and aflibercept in the management of diabetic retinopathy associated with DME may suggest a potential for pharmacologic treatments of PDR as well. Novel therapies, including small interfering RNAs, chemokines, kallikrein-kinin inhibitors, and various anti-angiogenic agents, are currently being evaluated for the management of diabetic retinopathy and DME. In addition to these strategies, novel drug delivery methods such as sustained-release implants and refillable reservoir implants are either under active evaluation or have recently gained FDA approval. This review provides an update on the novel developments in the treatment of diabetic retinopathy.

Calcium Orthophosphate-Containing Biocomposites and Hybrid Biomaterials for Biomedical Applications

The state-of-the-art on calcium orthophosphate (CaPO4)-containing biocomposites and hybrid biomaterials suitable for biomedical applications is presented. Since these types of biomaterials offer many significant and exciting possibilities for hard tissue regeneration, this subject belongs to a rapidly expanding area of biomedical research. Through the successful combinations of the desired properties of matrix materials with those of fillers (in such systems, CaPO4 might play either role), innovative bone graft biomaterials can be designed. Various types of CaPO4-based biocomposites and hybrid biomaterials those are either already in use or being investigated for biomedical applications are extensively discussed. Many different formulations in terms of the material constituents, fabrication technologies, structural and bioactive properties, as well as both in vitro and in vivo characteristics have been already proposed. Among the others, the nano-structurally controlled biocomposites, those containing nanodimensional compounds, biomimetically fabricated formulations with collagen, chitin and/or gelatin, as well as various functionally graded structures seem to be the most promising candidates for clinical applications. The specific advantages of using CaPO4-based biocomposites and hybrid biomaterials in the selected applications are highlighted. As the way from a laboratory to a hospital is a long one and the prospective biomedical candidates have to meet many different necessities, the critical issues and scientific challenges that require further research and development are also examined.

Designing compartmentalized hydrogel microparticles for cell encapsulation and scalable 3D cell culture

Compartmentalized hydrogel microparticles with high production rate, uniform size and shape, and tunable ECM support were developed for various scalable 3D cell culture applications.

Managing diabetes with nanomedicine: challenges and opportunities

Nanotechnology-based approaches hold substantial potential for improving the care of patients with diabetes. Nanoparticles are being developed as imaging contrast agents to assist in the early diagnosis of type 1 diabetes. Glucose nanosensors are being incorporated in implantable devices that enable more accurate and patient-friendly real-time tracking of blood glucose levels, and are also providing the basis for glucose-responsive nanoparticles that better mimic the body's physiological needs for insulin. Finally, nanotechnology is being used in non-invasive approaches to insulin delivery and to engineer more effective vaccine, cell and gene therapies for type 1 diabetes. Here, we analyse the current state of these approaches and discuss key issues for their translation to clinical practice.

Oxygen supply to encapsulated therapeutic cells

Therapeutic cells encapsulated in immunobarrier devices have promise for treatment of a variety of human diseases without immunosuppression. The absence of sufficient oxygen supply to maintain viability and function of encapsulated tissue has been the most critical impediment to progress. Within the framework of oxygen supply limitations, we review the major issues related to development of these devices, primarily in the context of encapsulated islets of Langerhans for treating diabetes, including device designs and materials, supply of tissue, protection from immune rejection, and maintenance of cell viability and function. We describe various defensive measures investigated to enhance survival of transplanted tissue, and we review the diverse approaches to enhancement of oxygen transport to encapsulated tissue, including manipulation of diffusion distances and oxygen permeability of materials, induction of neovascularization with angiogenic factors and vascularizing membranes, and methods for increasing the oxygen concentration adjacent to encapsulated tissue so as to exceed that in the microvasculature. Recent developments, particularly in this latter area, suggest that the field is ready for clinical trials of encapsulated therapeutic cells to treat diabetes.

Applications of tissue engineering in the genitourinary tract

Congenital abnormalities and acquired disorders can lead to organ damage or loss of tissue within the genitourinary tract. For reconstructive purposes, tissue-engineering efforts are currently underway for virtually every type of tissue and organ within the urinary tract. Tissue engineering incorporates the fields of cell transplantation, materials science and engineering for the purpose of creating functional replacement tissue. This article reviews some of the principles of tissue engineering and some of the applications of these principles to the genitourinary tract.

Transplantation of Encapsulated Pancreatic Islets as a Treatment for Patients with Type 1 Diabetes Mellitus

Encapsulation of pancreatic islets has been proposed and investigated for over three decades to improve islet transplantation outcomes and to eliminate the side effects of immunosuppressive medications. Of the numerous encapsulation systems developed in the past, microencapsulation have been studied most extensively so far. A wide variety of materials has been tested for microencapsulation in various animal models (including nonhuman primates or NHPs) and some materials were shown to induce immunoprotection to islet grafts without the need for chronic immunosuppression. Despite the initial success of microcapsules in NHP models, the combined use of islet transplantation (allograft) and microencapsulation has not yet been successful in clinical trials. This review consists of three sections: introduction to islet transplantation, transplantation of encapsulated pancreatic islets as a treatment for patients with type 1 diabetes mellitus (T1DM), and present challenges and future perspectives.

Membranes to achieve immunoprotection of transplanted islets

Transplantation of islet or beta cells is seen as the cure for type 1 diabetes since it allows physiological regulation of blood glucose levels without requiring any compliance from the patients. In order to circumvent the use of immunosuppressive drugs (and their side effects), semipermeable membranes have been developed to encapsulate and immunoprotect transplanted cells. This review presents the historical developments of immunoisolation and provides an update on the current research in this field. A particular emphasis is laid on the fabrication, characterization and performance of membranes developed for immunoisolation applications.

Design, fabrication and characterization of drug delivery systems based on lab-on-a-chip technology

Lab-on-a-chip technology is an emerging field evolving from the recent advances of micro- and nanotechnologies. The technology allows the integration of various components into a single microdevice. Microfluidics, the science and engineering of fluid flow in microscale, is the enabling underlying concept for lab-on-a-chip technology. The present paper reviews the design, fabrication and characterization of drug delivery systems based on this amazing technology. The systems are categorized and discussed according to the scales at which the drug is administered. Starting with the fundamentals on scaling laws of mass transfer and basic fabrication techniques, the paper reviews and discusses drug delivery devices for cellular, tissue and organism levels. At the cellular level, a concentration gradient generator integrated with a cell culture platform is the main drug delivery scheme of interest. At the tissue level, the synthesis of smart particles as drug carriers using lab-on-a-chip technology is the main focus of recent developments. At the organism level, microneedles and implantable devices with fluid-handling components are the main drug delivery systems. For drug delivery to a small organism that can fit into a microchip, devices similar to those of cellular level can be used.

The use of stem cells for pancreatic regeneration in diabetes mellitus

The endocrine pancreas represents an interesting arena for regenerative medicine and cell therapeutics. One of the major pancreatic diseases, diabetes mellitus is a metabolic disorder caused by having an insufficient number of insulin-producing β cells. Replenishment of β cells by cell transplantation can restore normal metabolic control. The shortage in donor pancreata has meant that the demand for transplantable β cells has outstripped the supply, which could be met by using alternative sources of stem cells. This situation has opened up new areas of research, such as cellular reprogramming and in vivo β-cell regeneration. Pluripotent stem cells seem to be the best option for clinical applications of β-cell regeneration in the near future, as these cells have been demonstrated to represent an unlimited source of functional β cells. Although compelling evidence shows that the adult pancreas retains regenerative capacity, it remains unclear whether this organ contains stem cells. Alternatively, specialized cell types within or outside the pancreas retain plasticity in proliferation and differentiation. Cellular reprogramming or transdifferentiation of exocrine cells or other types of endocrine cells in the pancreas could provide a long-term solution.

Bio-Encapsulation for the Immune-Protection of Therapeutic Cells

The design of new technologies for treatment of human disorders is a complex and difficult task. The aim of this article is to explore state of art discussion of various techniques and materials involve in cell encapsulations. Encapsulation of cells within semi-permeable polymer shells or beads is a potentially powerful tool, and has long been explored as a promising approach for the treatment of several human diseases such as lysosomal storage disease (LSD), neurological disorders, Parkinsons disease, dwarfism, hemophilia, cancer and diabetes using immune-isolation gene therapy.

UHV-alginate as matrix for neurotrophic factor producing cells--a novel biomaterial for cochlear implant optimization to preserve inner ear neurons from degeneration

HYPOTHESIS

Ultra high viscous (UHV-) alginate is a suitable matrix for brain-derived neurotrophic factor (BDNF) producing cells, enabling cell survival and BDNF release out of the matrix and subsequent protection of auditory neuronal cells.

BACKGROUND

Cochlear implant (CI) target cells, spiral ganglion cells (SGC), undergo a progressive degeneration. BDNF prevents SGC from degeneration but has to be delivered locally to the inner ear for months. A permanent growth factor application may be realized via a cell-based drug delivery system. Encapsulation of this delivery system into a matrix could avoid immune response of the recipient, migration, and uncontrolled proliferation of the cells.

METHODS

NIH3T3-fibroblasts producing endogenous BDNF were incorporated in UHV-alginate. The survival of the cells in the alginate was examined by cell counts of cryogenic slices, and the BDNF production was determined by performing ELISA. The supernatant of the alginate-cell culture was added to primary SGC culture, and the neuroprotective effect of the produced BDNF was observed performing SGC counts.

RESULTS

BDNF-producing cells cultivated in UHV-alginate survived for up to 30 days, which was the latest time point observed. The BDNF concentration in cell culture medium, produced from in UHV-alginate incorporated fibroblasts and released out of the alginate matrix into the medium, was significantly increased after 30 days of cultivation. Supernatant of 7 days incubated UHV-alginate containing NIH3T3/BDNF cells significantly increased the SGC survival in vitro.

CONCLUSION

This study demonstrates UHV-alginate to be a suitable scaffold for BDNF-producing fibroblasts. UHV-alginates are a promising biomaterial for cochlear implant biofunctionalization.

MRI-detectable pH nanosensors incorporated into hydrogels for in vivo sensing of transplanted-cell viability

Biocompatible nanomaterials and hydrogels have become an important tool for improving cell-based therapies by promoting cell survival and protecting cell transplants from immune rejection. Although their potential benefit has been widely evaluated, at present it is not possible to determine, in vivo, if and how long cells remain viable following their administration without the use of a reporter gene. Here, we report a pH-nanosensor-based magnetic resonance imaging (MRI) technique that can monitor cell death in vivo non-invasively. We demonstrate that specific MRI parameters that change on cell death of microencapsulated hepatocytes are associated with the measured bioluminescence imaging radiance. Moreover, the readout from this pH-sensitive nanosensor can be directly co-registered with high-resolution anatomical images. All of the components of these nanosensors are clinical grade and hence this approach should be a translatable and universal modification of hydrogels.

Control of the timing and dosage of IGF-I delivery from encapsulated cells

We report here on the development and characterization of a cell-based system for the regulated delivery of bioactive insulin-like growth factor I (IGF-I). A stable mammalian cell line, CHO-K1 Tet-IGFI, was genetically modified to have tetracycline-induced transcription of the human IGF-I gene. Cells were activated to express IGF-I in the presence of doxycycline (DOX), a tetracycline derivative, while expression was inactivated in the absence of DOX. Temporal, or on-off, release of IGF-I from cells encapsulated within Ca²⁺-alginate hydrogels was demonstrated in a pilot study over the course of 10 days in culture. Released growth factor was bioactive, exhibiting a proliferative effect comparable to recombinant purified IGF-I protein. The dosage levels and temporal control of IGF-I release from encapsulated cells meet the requirements of orthopedic wound repair, making this approach an attractive means for the controlled synthesis and delivery of growth factors in situ for wound healing.

Rapid Heterotrophic Ossification with Cryopreserved Poly(ethylene glycol-) Microencapsulated BMP2-Expressing MSCs

Autologous bone grafting is the most effective treatment for long-bone nonunions, but it poses considerable risks to donors, necessitating the development of alternative therapeutics. Poly(ethylene glycol) (PEG) microencapsulation and BMP2 transgene delivery are being developed together to induce rapid bone formation. However, methods to make these treatments available for clinical applications are presently lacking. In this study we used mesenchymal stem cells (MSCs) due to their ease of harvest, replication potential, and immunomodulatory capabilities. MSCs were from sheep and pig due to their appeal as large animal models for bone nonunion. We demonstrated that cryopreservation of these microencapsulated MSCs did not affect their cell viability, adenoviral BMP2 production, or ability to initiate bone formation. Additionally, microspheres showed no appreciable damage from cryopreservation when examined with light and electron microscopy. These results validate the use of cryopreservation in preserving the viability and functionality of PEG-encapsulated BMP2-transduced MSCs.

Microencapsulated mammalian cells for simultaneous production of VEGF165b and IFNα

Targeted and simultaneous delivery VEGF165b and IFN alpha in anti-angiogenic and other applications could offer several advantages. For this a system was design using artificial cell alginate-poly-L-lysine- alginate (APA) microcapsules. Result confirms the ability of this system for simultaneous production of these proteins for 28-days. The IFN alpha on a 3 days period increased from 8 ± 0.36 μg/ml at day 10 to 27 ± 2.4 μg/ml at day 16 and then dropped to 6.5 ± 0.5 μg/ml. The VEGF165b on a 3 days period increased from 2.7 ± 0.7 μg/ml at day 10 to 6.9 ± 1 μg/ml at day 16.

The use of biomaterials in islet transplantation

Pancreatic islet transplantation is a therapeutic option to replace destroyed β cells in autoimmune diabetes. Islets are transplanted into the liver via the portal vein; however, inflammation, the required immunosuppression, and lack of vasculature decrease early islet viability and function. Therefore, the use of accessory therapy and biomaterials to protect islets and improve islet function has definite therapeutic potential. Here we review the application of niche accessory cells and factors, as well as the use of biomaterials as carriers or capsules, for pancreatic islet transplantation.

Biocomposites and hybrid biomaterials based on calcium orthophosphates

The state-of-the-art of biocomposites and hybrid biomaterials based on calcium orthophosphates that are suitable for biomedical applications is presented in this review. Since these types of biomaterials offer many significant and exciting possibilities for hard tissue regeneration, this subject belongs to a rapidly expanding area of biomedical research. Through successful combinations of the desired properties of matrix materials with those of fillers (in such systems, calcium orthophosphates might play either role), innovative bone graft biomaterials can be designed. Various types of biocomposites and hybrid biomaterials based on calcium orthophosphates, either those already in use or being investigated for biomedical applications, are extensively discussed. Many different formulations, in terms of the material constituents, fabrication technologies, structural and bioactive properties as well as both in vitro and in vivo characteristics, have already been proposed. Among the others, the nanostructurally controlled biocomposites, those containing nanodimensional compounds, biomimetically fabricated formulations with collagen, chitin and/or gelatin as well as various functionally graded structures seem to be the most promising candidates for clinical applications. The specific advantages of using biocomposites and hybrid biomaterials based on calcium orthophosphates in the selected applications are highlighted. As the way from the laboratory to the hospital is a long one, and the prospective biomedical candidates have to meet many different necessities, this review also examines the critical issues and scientific challenges that require further research and development.

Cell surface engineering with polyelectrolyte multilayer thin films

Layer-by-layer assembly of polyelectrolyte multilayer (PEM) films represents a bottom-up approach for re-engineering the molecular landscape of cell surfaces with spatially continuous and molecularly uniform ultrathin films. However, fabricating PEMs on viable cells has proven challenging owing to the high cytotoxicity of polycations. Here, we report the rational engineering of a new class of PEMs with modular biological functionality and tunable physicochemical properties which have been engineered to abrogate cytotoxicity. Specifically, we have discovered a subset of cationic copolymers that undergoes a conformational change, which mitigates membrane disruption and facilitates the deposition of PEMs on cell surfaces that are tailorable in composition, reactivity, thickness, and mechanical properties. Furthermore, we demonstrate the first successful in vivo application of PEM-engineered cells, which maintained viability and function upon transplantation and were used as carriers for in vivo delivery of PEMs containing biomolecular payloads. This new class of polymeric film and the design strategies developed herein establish an enabling technology for cell transplantation and other therapies based on engineered cells.

Encapsulation of pancreatic islets within nano-thin functional polyethylene glycol coatings for enhanced insulin secretion

Covalent attachment of polymers to cells and tissues could be used to solve a variety of problems associated with cellular therapies. Insulin-dependent diabetes mellitus is a disease resulting from the autoimmune destruction of the beta cells of the islets of Langerhans in the pancreas. Transplantation of islets into diabetic patients is an attractive form of treatment, provided that the islets could be protected from the host's immune system to prevent graft rejection, and smaller numbers of islets transplanted in smaller volumes could be sufficient to reverse diabetes. Therefore, a need exists to develop islet encapsulation strategies that minimize transplant volume. In this study, we demonstrate the formation of nano-thin, poly(ethylene glycol) (PEG)-rich functional conformal coatings on individual islets via layer-by-layer assembly technique. The surface of the islets is modified with biotin-PEG-N-hydroxysuccinimide (NHS), and the islets are further covered by streptavidin (SA) and biotin-PEG-peptide conjugates using the layer-by-layer method. An insulinotropic ligand, glucagon-like peptide-1 (GLP-1), is conjugated to biotin-PEG-NHS. The insulinotropic effect of GLP-1 is investigated through layer-by-layer encapsulation of islets using the biotin-PEG-GLP-1 conjugate. The effect of islet surface modification using the biotin-PEG-GLP-1 conjugate on insulin secretion in response to glucose challenge is compared via static incubation and dynamic perifusion assays. The results show that islets coated with the functional PEG conjugate are capable of secreting more insulin in response to high glucose levels compared to control islets. Finally, the presence of SA is confirmed by indirect fluorescent staining with SA-Cy3, and the presence of PEG-peptide on the surface of the islets after treatment with biotin-PEG-GLP-1 is confirmed by indirect fluorescent staining with biotin-PEG-fluorescein isothiocyanate (FITC) and separately with an anti-GLP-1 antibody. This work demonstrates the feasibility of treating pancreatic islets with reactive polymeric segments and provides the foundation for a novel means of potential immunoisolation. With this technique, it may be possible to encapsulate and/or modify islets before portal vein transplantation and reduce transplantation volume significantly, and promote islet viability and insulin secretion due to the presence of insulinotropic peptides on the islet surface. Layer-by-layer self-assembly of PEG-GLP-1 offers a unique approach to islet encapsulation to stimulate insulin secretion in response to high glucose levels.

Optimal control of blood glucose: the diabetic patient or the machine?

In this issue of Science Translational Medicine, El-Khatib et al. describe a "closed-loop" bihormonal artificial pancreas, designed to avert episodes of low blood sugar in patients with insulin-dependent diabetes. We discuss the benefits and challenges of therapy directed at tight control of blood glucose and ask whether this and similar technological breakthroughs can address as yet unanswered questions in the biology of diabetes.