Chemical synthesis of lactic acid from cellulose catalysed by lead(II) ions in water

Review on synthesis of lactic acid and lactates from biomass derived carbohydrates via chemocatalysis routes

The utilization of renewable lignocellulosic biomass resources is a promising solution to deal with the deficit of fossil resources and the associated environmental concerns. Among diverse biomass-derived products, lactic acid (LA) stands out as one of the most successful commodities and also a platform to connect raw biomass feedstocks with value-added chemicals and degradable polymers. Herein, we critically review the recent advances in the design and development of base, acid, and multifunctional catalytic systems for the conversion of different carbohydrates to LA and alkyl lactates via chemical routes. In addition to critically evaluating the advantages and disadvantages of different catalytic systems, we provide deep insights into the reaction mechanisms, including the reaction pathways of different feedstocks, the catalytic roles of different kinds of active sites, and the structure-activity relationship. We conclude with our perspective on the key challenges and future opportunities.

Accelerated Charge Transfer through Interface Chemical Bonds in MoS2/TiO2 for Photocatalytic Conversion of Lignocellulosic Biomass to H2

Solar photocatalytic H2 production from lignocellulosic biomass has attracted great interest, but it suffers from low photocatalytic efficiency owing to the absence of highly efficient photocatalysts. Herein, we designed and constructed ultrathin MoS2-modified porous TiO2 microspheres (MT) with abundant interface Ti-S bonds as photocatalysts for photocatalytic H2 generation from lignocellulosic biomass. Owing to the accelerated charge transfer related to Ti-S bonds, as well as the abundant active sites for both H2 and ●OH generation, respectively, related to the high exposed edge of MoS2 and the large specific surface area of TiO2, MT photocatalysts demonstrate good performance in the photocatalytic conversion of α-cellulose and lignocellulosic biomass to H2. The highest H2 generation rate of 849 μmol·g-1·h-1 and apparent quantum yield of 4.45% at 380 nm was achieved in α-cellulose aqueous solution for the optimized MT photocatalyst. More importantly, lignocellulosic biomass of corncob, rice hull, bamboo, polar wood chip, and wheat straw were successfully converted to H2 over MT photocatalysts with H2 generation rate of 10, 19, 36, 29, and 8 μmol·g-1·h-1, respectively. This work provides a guiding design approach to develop highly active photocatalysts via interface engineering for solar H2 production from lignocellulosic biomass.

Theoretical comparison of fructose with methylglucoside for the production of formate and levulinate catalyzed by Brønsted acids in a methanol solution

For the conversion of fructose/methylglucoside (MG) into both methyl formate (MF) and methyl levulinate (MLev), the C-source of formate [HCOO]- remains unclear at the molecular level. Herein, reaction mechanisms catalyzed by [CH3OH2]+ in a methanol solution were theoretically investigated at the PBE0/6-311++G(d,p) level. For the conversion of fructose into MF and MLev, the formate [HCOO]- comes from the C1-atom of fructose, in which the rate-determining step lies in the reaction of 5-hydroxymethylfurfural (HMF) with CH3OH to yield MF and MLev. The reaction of fructose with CH3OH kinetically tends to generate HMF intermediates rather than yield (MF + MLev). When MG is dissolved in a methanol solution, its O2, O3, and O4 atoms are closer to the first layer of the solvent than O1, O5, and O6 atoms. For the dehydration of MG with methanol into MF and MLev, the formate [HCOO]- stems from the dominant C1- and secondary C3-atoms of MG. Kinetically, MG is ready to yield (MF + MLev), whereas fructose can induce the reaction to remain at the HMF intermediate, inhibiting the further conversion of HMF with CH3OH into MF and MLev. If MG isomerizes into fructose, the reaction will be more preferable for yielding HMF rather than (MF + MLev).

Homogeneous and Heterogeneous Catalysis of Glucose to Lactic Acid and Lactates: A Review

The current societal demand to replace polymers derived from petroleum with sustainable bioplastics such as polylactic acid (PLA) has motivated industry to commercialize ever-larger facilities for biobased monomers like lactic acid. Even though most of the lactic acid is produced by fermentation, long reaction times and high capital costs compromise the economics and thus limit the appeal of biotechnological processes. Catalytic conversion of hexose from biomass is a burgeoning alternative to fermentation. Here we identify catalysts to convert glucose to lactic acid, along with their proposed mechanisms. High Lewis acidity makes erbium salts among the most active homogeneous catalysts, while solvent coordination with the metal species polarize the substrate, increasing the catalytic activity. For heterogeneous catalysts, Sn-containing bimetallic systems combine the high Lewis acidity of Sn while moderating it with another metal, thus decreasing byproducts. Hierarchical bimetallic Sn-Beta zeolites combine a high number of open sites catalyzing glucose isomerization in the mesoporous regions and the confinement effect assisting fructose retro-aldol in microporous regions, yielding up to 67% lactic acid from glucose. Loss of activity is still an issue for heterogeneous catalysts, mostly due to solvent adsorption on the active sites, coke formation, and metal leaching, which impedes its large scale adoption.

Selective Stereoretention of Carbohydrates upon C-C Cleavage Enabling D-Glyceric Acid Production with High Optical Purity over a Ag/γ-Al2O3 Catalyst

Chiral carboxylic acid production from renewable biomass by chemocatalysis is vitally important for reducing our carbon footprint, but remains underdeveloped. We herein establish a strategy that make use of a stereogenic center of biomass to achieve a rare example of D-glyceric acid production with the highest yield (86.8 %) reported to date as well as an excellent ee value (>99 %). Unlike traditional asymmetric catalysis, chiral catalysts/additives are not required. Ample experiments combined with quantum chemical calculations established the origins of the stereogenic center and catalyst performance. The chirality at C4 in D-xylose was proved to be retained and successfully delivered to C2 in D-glyceric acid during C-C cleavage. The remarkable cooperative-roles of Ag+ and Ag0 in the constructed Ag/γ-Al2O3 catalyst are disclosed as the crucial contributors. Ag+ was responsible for low-temperature activation of D-xylose, while Ag0 facilitated the generation of active O* from O2. Ag+ and active O* cooperatively promoted the precise cleavage of the C2-C3 bond, and more importantly O* allowed the immediate fast oxidization of the D-glyceraldehyde intermediate to stabilize D-glyceric acid, thereby inhibiting the side reaction that induced racemization. This strategy makes a significant breakthrough in overcoming the limitation of poor enantioselectivity in current chemocatalytic conversion of biomass.

Pyrolysis of exhausted biochar sorbent: Fates of cadmium and generation of products

Biochar is a promising sorbent for Cd removal from water, while the disposal of the exhausted Cd-enriched biochar remains a challenge. In this study, pyrolysis was employed to treat the exhausted biochar under N2 and CO2 atmospheres at 600-900 °C, and the fate of Cd during pyrolysis and characteristics of high-valued products were determined. The results indicated that higher temperature and CO2 atmosphere favored the volatilization of Cd. Based on the toxicity characteristic leaching procedure (TCLP) results, the pyrolysis treatment under both atmospheres enhanced the stability of Cd, and the leached Cd concentration of regenerated biochar obtained at high temperatures (>800 °C) was lower than 1 mg/L. Compared with the pristine biochar, the regenerated biochar demonstrated higher carbon content and pH, whereas the contents of oxygen and hydrogen declined, and exhibited promising sorption properties (35.79 mg/g). The atmosphere played an important role in modifying biochar properties and syngas composition. The N2 atmosphere facilitated CH4 production, whereas the CO2 atmosphere increased the proportion of CO. These results implied that pyrolysis can be a valuable and environmental-friendly strategy for the treatment and reuse of exhausted biochar sorbent.

Highly Efficient Ru-Based Catalysts for Lactic Acid Conversion to Alanine

The primary objective of this research was to develop efficient solid catalysts that can directly convert the lactic acid (LA) obtained from lignocellulosic biomass into alanine (AL) through a reductive amination process. To achieve this, various catalysts based on ruthenium were synthesized using different carriers such as multi-walled carbon nanotubes (MWCNTs), beta-zeolite, and magnetic nanoparticles (MNPs). Among these catalysts, Ru/MNP demonstrated a remarkable yield of 74.0% for alanine at a temperature of 200 °C. This yield was found to be superior not only to the Ru/CNT (55.7%) and Ru/BEA (6.6%) catalysts but also to most of the previously reported catalysts. The characterization of the catalysts and their catalytic results revealed that metallic ruthenium nanoparticles, which were highly dispersed on the external surface of the magnetic carrier, significantly enhanced the catalyst's ability for dehydrogenation. Additionally, the -NH2 basic sites on the catalyst further facilitated the formation of alanine by promoting the adsorption of acidic reactants. Furthermore, the catalyst could be easily separated using an external magnetic field and exhibited the potential for multiple reuses without any significant loss in its catalytic performance. These practical advantages further enhance its appeal for applications in the reductive amination of lactic acid to alanine.

Global trends and future prospects of lactic acid production from lignocellulosic biomass

Lignocellulosic biomass (LCB) stands as a substantial and sustainable resource capable of addressing energy and environmental challenges. This study employs bibliometric analysis to investigate research trends in lactic acid (LA) production from LCB spanning the years 1991 to 2022. The analysis reveals a consistent growth trajectory with minor fluctuations in LA production from LCB. Notably, there's a significant upswing in publications since 2009. Bioresource Technology and Applied Microbiology and Biotechnology emerge as the top two journals with extensive contributions in the realm of LA production from LCB. China takes a prominent position in this research domain, boasting the highest total publication count (736), betweenness centrality value (0.30), and the number of collaborating countries (42), surpassing the USA and Japan by a considerable margin. The author keywords analysis provides valuable insights into the core themes in LA production from LCB. Furthermore, co-citation reference analysis delineates four principal domains related to LA production from LCB, with three associated with microbial conversion and one focused on chemical catalytic conversion. Additionally, this study examines commonly used LCB, microbial LA producers, and compares microbial fermentation to chemical catalytic conversion for LCB-based LA production, providing comprehensive insights into the current state of this field and suggesting future research directions.

Sustainable Production of Lactic Acid from Cellulose Using Au/W-ZnO Catalysts

The catalytic conversion of cellulose to lactic acid (LA) has garnered significant attention in recent years due to the potential of cellulose as a renewable and sustainable biomass feedstock. Here, a series of Au/W-ZnO catalysts were synthesized and employed to transform cellulose into LA. Through the optimization of reaction parameters and catalyst compositions, we achieved complete cellulose conversion with a selectivity of 54.6% toward LA over Au/W-ZnO at 245 °C for 4 h. This catalyst system also proved effective at converting cotton and kenaf fibers. Structural and chemical characterizations revealed that the synergistic effect of W, ZnO, and Au facilitated mesoporous architecture generation and the establishment of an adequate acidic environment. The catalytic process proceeded through the hydrolysis of cellulose to glucose, isomerization to fructose, and its subsequent conversion to LA, with glucose isomerization identified as the rate-limiting step. These findings provide valuable insights for developing high-performance catalytic systems to convert cellulose.

Catalytic conversion of cellulosic biomass to harvest high-valued organic acids

Catalytic conversion of biomass provides an alternative way for the production of organic acids from renewable feedstocks. The emerging process contains complex reactions and strategies to cut down those complex biogenic materials into target molecules. Here, we review the catalytic conversion of cellulosic biomass toward high-valued organic acids. This work has summarized the key controlling reactions which lead toward formic acid, glycolic acid, or sugar acids in oxidative conditions and the main pathways for lactic acid or levulinic acid in the anaerobic environment from cellulosic biomass and its derivatives. We evaluate and compare different strategies and methods such as one-pot and two-step conversion. Additionally, the optimization of catalytic reactions has been discussed to realize the design of C-C coupling reactions, the development of multifunctional materials, and new efficient system. In all, this article gives an insight guide to precisely convert cellulosic biomass into target organic acids.

Catalytic Conversion of Sugars into Lactic Acid via a RuOx/MoS2 Catalyst

The catalytic transformation of sugars into lactic acid has shown great potential for the scalable utilization of renewable biomass. Herein, RuOx/MoS2 catalysts were synthesized with the assistance of CaO for the one-pot conversion of glucose to lactic acid. Under the reaction conditions of 120 °C and 1MPa O2, a 96.6% glucose conversion and a 54.3% lactic acid yield were realized in the one-pot catalytic reaction, with relatively high stability after four successive cycles. This catalytic system was also effective for the conversion of many other carbohydrate substrates, such as fructose, xylose and cellulose (selectivity 68.9%, 78.2% and 50.6%, respectively). According to catalyst characterizations and conditional experiments, the highly dispersed RuOx species on the surface of MoS2, together with OH−, promoted isomerization, retro-aldol condensation, dehydration and hydration reactions, resulting in a relatively high lactic acid yield for sugar conversions.

Polymers without Petrochemicals: Sustainable Routes to Conventional Monomers

Access to a wide range of plastic materials has been rationalized by the increased demand from growing populations and the development of high-throughput production systems. Plastic materials at low costs with reliable properties have been utilized in many everyday products. Multibillion-dollar companies are established around these plastic materials, and each polymer takes years to optimize, secure intellectual property, comply with the regulatory bodies such as the Registration, Evaluation, Authorisation and Restriction of Chemicals and the Environmental Protection Agency and develop consumer confidence. Therefore, developing a fully sustainable new plastic material with even a slightly different chemical structure is a costly and long process. Hence, the production of the common plastic materials with exactly the same chemical structures that does not require any new registration processes better reflects the reality of how to address the critical future of sustainable plastics. In this review, we have highlighted the very recent examples on the synthesis of common monomers using chemicals from sustainable feedstocks that can be used as a like-for-like substitute to prepare conventional petrochemical-free thermoplastics.

One Step Catalytic Conversion of Polysaccharides in Ulva prolifera to Lactic Acid and Value-Added Chemicals

The production of lactic acid and value-added chemicals (such as hydroxypropanone, glycolic acid, and formic acid) directly from Ulva prolifera via one-step catalytic process was studied. The effect of different amounts of YCl3-derived catalysts on the hydrothermal conversion of carbohydrates in Ulva prolifera was explored, and the reaction conditions were optimized. In this catalytic system, rhamnose could be extracted from Ulva prolifera and converted in situ into lactic acid and hydroxypropanone at 160 °C, while all the glucose, xylose, and rhamnose were fractionated and completely converted to lactic acid at 220 °C or at a higher temperature, via several consecutive and/or parallel catalytic processes. The highest yield of lactic acid obtained was 31.4 wt% under the optimized conditions. The hydrothermal conversion of Ulva prolifera occurred rapidly (within 10 min) and showed promise to valorize Ulva prolifera.

Pyrolysis of exhausted hydrochar sorbent for cadmium separation and biochar regeneration

Sorption is considered a cost-effective technique for cadmium (Cd) removal from water, while the exhausted Cd-enriched sorbent should be properly disposed of. In this study, pyrolysis of exhausted hydrochar sorbent was conducted at 300-900 °C, and the behavior of Cd and the physicochemical properties and environmental applications of the regenerated biochar were investigated. The vaporization of adsorbed Cd in hydrochar was greatly enhanced by elevating pyrolysis temperature, and almost no Cd was observed in the regenerated biochars obtained at 700-900 °C. In comparison with the raw hydrochar, the regenerated biochars showed higher pH, ash content, and carbon content, while the contents of hydrogen and oxygen decreased. According to the toxicity characteristic leaching procedure result, the toxicity and mobility of Cd in hydrochar were greatly reduced after pyrolysis. Notably, the regenerated biochar showed much higher Cd sorption capacity (26.05-30.24 mg/g) than the raw hydrochar (6.70 mg/g). Surface complexation with oxygen-containing functional groups was the dominant Cd sorption mechanism for hydrochar, and precipitation between Cd²⁺ and carbonates dominated the Cd removal by the regenerated biochars. These results illuminated that pyrolysis can be an effective technique for the harmless disposal of exhausted hydrochar sorbent and the regeneration of valuable biochar.

Efficient Catalytic Conversion of Glucose into Lactic Acid over Y-β and Yb-β Zeolites

In this work, a new type of modified β zeolites with rare earth elements (ree) was discovered for producing lactic acid from glucose and achieved a good catalytic effect. At first, the catalytic performances of ree-β zeolites, ree oxides, and single-transition-metal-β zeolites were compared, and the result showed that Y-β and Yb-β zeolites had the best catalytic activity under the same reaction conditions. Under the best reaction conditions, the maximum yields of lactic acid with Y-β and Yb-β catalysts were 45.3 and 43.6%, respectively. The acid characterization showed that Y/Yb-β zeolites had a similar number of Lewis acid sites as Sn-β zeolites, and they were also more than other transition-metal-β zeolites. Thus, Y-β and Yb-β zeolites had a higher lactic acid yield than those catalysts. It is interesting to note that Y-β and Yb-β zeolites owned more Brønsted acids but produced fewer byproducts. Combining the decomposition experiment of 5-hydroxymethyl furfural, fewer byproducts were produced with Y-β and Yb-β zeolites because the low amount of Brønsted acid contained could hinder the decomposition of 5-hydroxymethyl furfural, thereby slowing down the side reaction.

Catalytic amination of lactic acid using Ru-zeolites

In this work we investigate the synthesis of alanine from lactic acid, a biobased platform chemical, using ammonia as a nitrogen source and Ru/zeolite catalysts. We report a high alanine selectivity when using Ru/BEA of 80-93%. Reaction side products were identified as ethanol, propionic acid or propanamide and the reaction mechanism was investigated. We further optimised reaction conditions resulting in turn over numbers five times higher than previously reported and could reduce Ru leaching by 30-40%. However, leaching and catalyst stability remains a concern. Furthermore, we critically analyse the benefits of Ru/zeolites versus their stability under the basic, high temperature reaction conditions.

Green Carbon Science: Efficient Carbon Resource Processing, Utilization, and Recycling Towards Carbon Neutrality

Green carbon science is defined as "Study and optimization of the transformation of carbon containing compounds and the relevant processes involved in the entire carbon cycle from carbon resource processing, carbon energy utilization, and carbon recycling to use carbon resources efficiently and minimize the net CO2 emission." [1] Green carbon science is related closely to carbon neutrality, and the relevant fields have developed quickly in the last decade. In this Minireview, we proposed the concept of carbon energy index, and the recent progresses in petroleum refining, production of liquid fuels, chemicals, and materials using coal, methane, CO2, biomass, and waste plastics are highlighted in combination with green carbon science, and an outlook for these important fields is provided in the final section.

A review on disposal and utilization of phytoremediation plants containing heavy metals

The reasonable disposal of plant biomass containing heavy metals (HMs) is a difficult problem for the phytoremediation technology. This review summarizes current literature that introduces various disposal and utilization methods (heat treatment, extraction treatment, microbial treatment, compression landfill, and synthesis of nanomaterials) for phytoremediation plants with HMs. The operation process and technical parameters of each disposal method are different. HMs can migrate and transform in different disposal processes. Some disposal and utilization methods can get some by-products. The main purpose of this paper is to provide reference for technical parameters and characteristics of various disposal and utilization methods, so as to choose and use the appropriate method for the treatment of plant biomass containing HMs after phytoremediation.

Emerging heterogeneous catalysts for biomass conversion: studies of the reaction mechanism

The development of efficient catalysts to break down and convert woody biomass will be a paradigm shift in delivering the global target of sustainable economy and environment via the use of cheap, highly abundant, and renewable carbon resources. However, such development is extremely challenging due to the complexity of lignocellulose, and today most biomass is treated simply as waste. The solution lies in the design of multifunctional catalysts that can place effective control on substrate activation and product selectivity. This is, however, severely hindered by the lack of fundamental understanding of (i) the precise role of active sites, and (ii) the catalyst-substrate chemistry that underpins the catalytic activity. Moreover, active sites alone often cannot deliver the desired selectivity of products, and full understanding of the microenvironment of the active sites is urgently needed. Here, we review key recent advances in the study of reaction mechanisms of biomass conversion over emerging heterogeneous catalysts. These insights will inform the design of future catalytic systems showing improved activity and selectivity.

Quali-quantitative monitoring of chemocatalytic cellulose conversion into lactic acid by FT-NIR spectroscopy

Chemocatalytic conversion of cellulose into lactic acid is a valuable alternative to simple sugar fermentation. Nevertheless, the procedures still need optimization to be translated to the industrial scale. Such translation would benefit by on-line monitoring of reaction parameters by fast, inexpensive, direct spectroscopic techniques. In this work, we propose the application of FT-NIR spectroscopy as a suitable analytical tool for monitoring the chemocatalytic conversion of cellulose into lactic acid. Comparison between different FT-NIR spectra at different reaction temperatures and times was exploited to qualitatively indicate the feasibility of the reaction. Besides, an FT-NIR prediction model was proposed for rapidly estimating the molar distribution of cellulose catalytic degradation components in the reaction mixtures. The calibration model was based on reference samples analysed by HPLC. The model was validated by an external validation set. Relevant statistical values of Ratio Performance to Deviations (RPD) referred to both calibration and external validation were obtained, thus demonstrating the potential of such analytical technique in process monitoring.

Eating microRNAs: pharmacological opportunities for cross-kingdom regulation and implications in host gene and gut microbiota modulation

Cross-kingdom communication via non-coding RNAs is a recent discovery. Exogenous microRNAs (exog-miRNAs) mainly enter the host via the diet. Generally considered unstable in the gastrointestinal tract, some exogenous RNAs may resist these conditions, especially if transported in extracellular vesicles. They could then reach the intestines and more probably exert a regulatory effect. We give an overview of recent discoveries concerning dietary miRNAs, possible ways of enhancing their resistance to food processing and gut conditions, their transport in extracellular vesicles (animal- and plant-origin) and possible biological effects on recipient cells after ingestion. We critically focus on what we believe are the most relevant data for future pharmacological development of dietary miRNAs as therapeutic agents. Finally, we discuss the miRNA-mediated cross-kingdom regulation between diet, host and the gut microbiota. We conclude that, despite many obstacles and challenges, extracellular miRNAs are serious candidates to be targeted pharmacologically for development of new therapeutic agents.

A review on the thermal treatment of heavy metal hyperaccumulator: Fates of heavy metals and generation of products

Phytoremediation is perceived as a promising technique for remediation of heavy metal (HM) contaminated soils, while the harvested HM-enriched hyperaccumulator biomass should be appropriately disposed. Recently, various thermal treatments of hyperaccumulator have drawn increasing attention. After thermal treatment, the hyperaccumulator was converted to bio-oil, bio-gas, biochar, or ash in accordance with the corresponding conditions, and the HMs were separated, immobilized, or trapped. The migration and transformation of HMs during the thermochemical conversion processes are critical for the safe disposal and further utilization of HM hyperaccumulator. This paper provides a systematic review on the migration and transformation of typical HMs (Cd, Ni, Mn, As, and Zn) in hyperaccumulator during various thermochemical conversion processes, and special emphasis is given to the production and application of targeted products (e.g. biochar, hydrochar, bio-oil, and syngas). Besides, future challenges and perspectives in the thermal treatment of hyperaccumulator are presented as well. The distribution and speciation of HMs were influenced by thermal technique type and reaction conditions, thereby affecting the utilization of the derived products. This review suggests that speciation and availability of HMs in hyperaccumulator are tunable by varying treatment techniques and reaction conditions. This information should be useful for the selective conversion of hyperaccumulator into green and valuable products.

Coproduction of hydrogen and lactic acid from glucose photocatalysis on band-engineered Zn1-xCdxS homojunction

Photocatalytic transformation of biomass into value-added chemicals coupled with co-production of hydrogen provides an explicit route to trap sunlight into the chemical bonds. Here, we demonstrate a rational design of Zn_1-xCd_xS solid solution homojunction photocatalyst with a pseudo-periodic cubic zinc blende (ZB) and hexagonal wurtzite (WZ) structure for efficient glucose conversion to simultaneously produce hydrogen and lactic acid. The optimized Zn_0.6Cd_0.4S catalyst consists of a twinning superlattice, has a tuned bandgap, and displays excellent efficiency with respect to hydrogen generation (690 ± 27.6 μmol·h⁻¹·g_cat.⁻¹), glucose conversion (~90%), and lactic acid selectivity (~87%) without any co-catalyst under visible light irradiation. The periodic WZ/ZB phase in twinning superlattice facilitates better charge separation, while superoxide radical (⋅O₂^-) and photogenerated holes drive the glucose transformation and water oxidation reactions, respectively. This work demonstrates that rational photocatalyst design could realize an efficient and concomitant production of hydrogen and value-added chemicals from glucose photocatalysis.

•

Zn_1-xCd_xS ZB-WZ homojunction was designed to improve charge separation efficiency

•

Bandgap engineering improved the hydrogen production from glucose photoreforming

•

Optimized Zn_0.6Cd_0.4S ZB-WZ exhibited high lactic acid yield and selectivity

•

Rational photocatalyst design realizes biomass valorization and H₂ coproduction

Selective Conversion of Scenedesmus into Lactic Acid over Amine-Modified Sn-β

Amine-modified Sn-β was synthesized to improve the yield of lactic acid produced from Scenedesmus. After studying the growth of Scenedesmus, we selected Scenedesmus with the highest sugar content of 46.7% after 8 days of culture as the reaction substrate. The results showed that the yield of lactic acid from Scenedesmus was greatly increased after being catalyzed by 3-aminopropyltrimethoxysilane (APTMS)-modified Sn-β. After the pretreatment of Scenedesmus in an ice bath ultrasound, under the optimal reaction conditions (190 °C and 5 h), the yield of lactic acid reached the highest (37%). The acid-base characterization results of the catalyst confirmed that there are both Lewis acidic sites and medium-strength basic sites in the catalyst. Both of these sites can promote the hydrolysis of Scenedesmus, while the Lewis acidic sites can promote the production of lactic acid and the basic sites can effectively inhibit the production of the byproduct 5-hydroxymethylfurfural (HMF). This study proved that this amination catalyst is a useful strategy to increase the yield of lactic acid.

Sustainable production of propionic acid: catalytic deoxygenation of lactic acid over MoOx/Fe

The synergistic effect between MoOx and Fe markedly promoted the activity on deoxygenation of lactic acid to bio-propionic acid.

Confined alkali metal ions in two-dimensional aluminum phosphate promoted activity for the condensation of lactic acid to 2,3-pentanedione

The intercalated alkali metal ions can efficiently mediate the acidity–basicity of the catalysts, significantly promoting the activity for LA condensation to 2,3-pentanedione.

Biosourced All-Acrylic ABA Block Copolymers with Lactic Acid-Based Soft Phase

Lactic acid is one of the key biobased chemical building blocks, given its readily availability from sugars through fermentation and facile conversion into a range of important chemical intermediates and polymers. Herein, well-defined rubbery polymers derived from butyl lactate solvent were successfully prepared by reversible addition–fragmentation chain transfer (RAFT) polymerization of the corresponding monomeric acrylic derivative. Good control over molecular weight and molecular weight distribution was achieved in bulk using either monofunctional or bifunctional trithiocarbonate-type chain transfer agents. Subsequently, poly(butyl lactate acrylate), with a relative low T_g (−20 °C), good thermal stability (5% wt. loss at 340 °C) and low toxicity was evaluated as a sustainable middle block in all-acrylic ABA copolymers using isosorbide and vanillin-derived glassy polyacrylates as representative end blocks. Thermal, morphological and mechanical properties of copolymers containing hard segment contents of <20 wt% were evaluated to demonstrate the suitability of rubbery poly(alkyl lactate) building blocks for developing functional sustainable materials. Noteworthy, 180° peel adhesion measurements showed that the synthesized biosourced all-acrylic ABA copolymers possess competitive performance when compared with commercial pressure-sensitive tapes.

New (and Old) Monomers from Biorefineries to Make Polymer Chemistry More Sustainable

This opinion article describes recent approaches to use the "biorefinery" concept to lower the carbon footprint of typical mass polymers, by replacing parts of the fossil monomers with similar or even the same monomer made from regrowing dendritic biomass. Herein, the new and green catalytic synthetic routes are for lactic acid (LA), isosorbide (IS), 2,5-furandicarboxylic acid (FDCA), and p-xylene (pXL). Furthermore, the synthesis of two unconventional lignocellulosic biomass derivable monomers, i.e., α-methylene-γ-valerolactone (MeGVL) and levoglucosenol (LG), are presented. All those have the potential to enter in a cost-effective way, also the mass market and thereby recover lost areas for polymer materials. The differences of catalytic unit operations of the biorefinery are also discussed and the challenges that must be addressed along the synthesis path of each monomers.

Lactic acid production - producing microorganisms and substrates sources-state of art

Lactic acid is an organic compound produced via fermentation by different microorganisms that are able to use different carbohydrate sources. Lactic acid bacteria are the main bacteria used to produce lactic acid and among these, Lactobacillus spp. have been showing interesting fermentation capacities. The use of Bacillus spp. revealed good possibilities to reduce the fermentative costs. Interestingly, lactic acid high productivity was achieved by Corynebacterium glutamicum and E. coli, mainly after engineering genetic modification. Fungi, like Rhizopus spp. can metabolize different renewable carbon resources, with advantageously amylolytic properties to produce lactic acid. Additionally, yeasts can tolerate environmental restrictions (for example acidic conditions), being the wild-type low lactic acid producers that have been improved by genetic manipulation. Microalgae and cyanobacteria, as photosynthetic microorganisms can be an alternative lactic acid producer without carbohydrate feed costs. For lactic acid production, it is necessary to have substrates in the fermentation medium. Different carbohydrate sources can be used, from plant waste as molasses, starchy, lignocellulosic materials as agricultural and forestry residues. Dairy waste also can be used by the addition of supplementary components with a nitrogen source.

Visible-light-driven amino acids production from biomass-based feedstocks over ultrathin CdS nanosheets

Chemical synthesis of amino acids from renewable sources is an alternative route to the current processes based on fermentation. Here, we report visible-light-driven amination of biomass-derived α-hydroxyl acids and glucose into amino acids using NH₃ at 50 °C. Ultrathin CdS nanosheets are identified as an efficient and stable catalyst, exhibiting an order of magnitude higher activity towards alanine production from lactic acid compared to commercial CdS as well as CdS nanoobjects bearing other morphologies. Its unique catalytic property is attributed mainly to the preferential formation of oxygen-centered radicals to promote α-hydroxyl acids conversion to α-keto acids, and partially to the poor H₂ evolution which is an undesired side reaction. Encouragingly, a number of amino acids are prepared using the current protocol, and one-pot photocatalytic conversion of glucose to alanine is also achieved. This work offers an effective catalytic system for amino acid synthesis from biomass feedstocks under mild conditions.

Identification of the Soluble Byproducts Formed during the Hydrothermal Conversion of Cellulose Catalyzed by Solid Tungstated Alumina

The soluble byproducts formed during the hydrothermal conversion of cellulose catalyzed by solid tungstated alumina (AlW) were analyzed by LC-MS and LC-MS² to determine their formulas and possible structures. These identified soluble compounds could be roughly divided into four species of carboxylic acids, α-carbonyl aldehydes, carbocyclic compounds, and furanic compounds with molecular mass in the range of 90-220 Da. Compared with the noncatalytic condition, the addition of AlW could increase the selectivity of carboxylic acids (especially α-hydroxy acid) from cellulose and suppress the formation of furanic compounds, carbocyclic compounds, and hydrochar. Based on the product distribution, the hydrothermal conversion route of glucose was proposed by regarding the formed α-carbonyl aldehydes as the key intermediates for formation of carboxylic acids, carbocyclic compounds, and furanic compounds.