Redox activity of surface oxygen anions in oxygen-deficient perovskite oxides during electrochemical reactions

How to Correctly Analyze 2p X-ray Photoelectron Spectra of 3d Transition-Metal Oxides: Pitfalls and Principles

Nanomaterials based on transition-metal oxides (TMOs) that contain late 3d transition metals (e.g., Mn, Fe, Co, Ni) have diverse properties and functionality that are related to the oxidation state of constituent transition-metal (TM) cations. X-ray photoelectron spectroscopy (XPS) of TM 2p orbitals has been widely used to quantify the TM oxidation state of TMOs. However, 2p XPS spectra of late 3d TM cations usually have complicated shapes due to the charge transfer between the TM cation and oxygen ligands (anions), which makes the analysis highly nontrivial. In this article, we will examine the validity of commonly used analysis methods based on either peak fitting or the shift of binding energy (BE). The different origins of the BE shift in XPS spectra will be discussed. We will then introduce a model to reproduce the complex shapes of TM 2p spectra, based on fundamental parameters that describe the TMO electronic structure.

Oxygen Migration Pathways in Layered LnBaCo2O6-δ (Ln = La - Y) Perovskites

Layered LnBaCo2O6-δ perovskites are important mixed ionic-electronic conductors, exhibiting outstanding catalytic properties for the oxygen evolution/reduction reaction. These phases exhibit considerable structural complexity, in particular, near room temperature, where a number of oxygen vacancy ordered superstructures are found. This study uses bond valence site energy calculations to demonstrate the key underlying structural features that favor facile ionic migration. BVSE calculations show that the 1D vacancy ordering for Ln = Sm-Tb could be beneficial at low temperatures as new pathways with reduced barriers emerge. By contrast, the 2D vacancy ordering for Ln = Dy and Y is not beneficial for ionic transport with the basic layered parent material having lower migration barriers. Overall, the key criterion for low migration barriers is an expanded ab plane, supported by Ba, coupled to a small Ln size. Hence, Ln = Y should be the best composition, but this is stymied by the low temperature 2D vacancy ordering and moderate temperature stability. The evolution of the oxygen cycling capability of these materials is also reported.

Engineering surface dipoles on mixed conducting oxides with ultra-thin oxide decoration layers

Improving materials for energy conversion and storage devices is deeply connected with an optimization of their surfaces and surface modification is a promising strategy on the way to enhance modern energy technologies. This study shows that surface modification with ultra-thin oxide layers allows for a systematic tailoring of the surface dipole and the work function of mixed ionic and electronic conducting oxides, and it introduces the ionic potential of surface cations as a readily accessible descriptor for these effects. The combination of X-ray photoelectron spectroscopy (XPS) and density functional theory (DFT) illustrates that basic oxides with a lower ionic potential than the host material induce a positive surface charge and reduce the work function of the host material and vice versa. As a proof of concept that this strategy is widely applicable to tailor surface properties, we examined the effect of ultra-thin decoration layers on the oxygen exchange kinetics of pristine mixed conducting oxide thin films in very clean conditions by means of in-situ impedance spectroscopy during pulsed laser deposition (i-PLD). The study shows that basic decorations with a reduced surface work function lead to a substantial acceleration of the oxygen exchange on the surfaces of diverse materials.

Lattice oxygen activation and local electric field enhancement by co-doping Fe and F in CoO nanoneedle arrays for industrial electrocatalytic water oxidation

Oxygen evolution reaction (OER) is critical to renewable energy conversion technologies, but the structure-activity relationships and underlying catalytic mechanisms in catalysts are not fully understood. We herein demonstrate a strategy to promote OER with simultaneously achieved lattice oxygen activation and enhanced local electric field by dual doping of cations and anions. Rough arrays of Fe and F co-doped CoO nanoneedles are constructed, and a low overpotential of 277 mV at 500 mA cm-2 is achieved. The dually doped Fe and F could cooperatively tailor the electronic properties of CoO, leading to improved metal-oxygen covalency and stimulated lattice oxygen activation. Particularly, Fe doping induces a synergetic effect of tip enhancement and proximity effect, which effectively concentrates OH- ions, optimizes reaction energy barrier and promotes O2 desorption. This work demonstrates a conceptual strategy to couple lattice oxygen and local electric field for effective electrocatalytic water oxidation.

A Review of Transition Metal Boride, Carbide, Pnictide, and Chalcogenide Water Oxidation Electrocatalysts

Transition metal borides, carbides, pnictides, and chalcogenides (X-ides) have emerged as a class of materials for the oxygen evolution reaction (OER). Because of their high earth abundance, electrical conductivity, and OER performance, these electrocatalysts have the potential to enable the practical application of green energy conversion and storage. Under OER potentials, X-ide electrocatalysts demonstrate various degrees of oxidation resistance due to their differences in chemical composition, crystal structure, and morphology. Depending on their resistance to oxidation, these catalysts will fall into one of three post-OER electrocatalyst categories: fully oxidized oxide/(oxy)hydroxide material, partially oxidized core@shell structure, and unoxidized material. In the past ten years (from 2013 to 2022), over 890 peer-reviewed research papers have focused on X-ide OER electrocatalysts. Previous review papers have provided limited conclusions and have omitted the significance of "catalytically active sites/species/phases" in X-ide OER electrocatalysts. In this review, a comprehensive summary of (i) experimental parameters (e.g., substrates, electrocatalyst loading amounts, geometric overpotentials, Tafel slopes, etc.) and (ii) electrochemical stability tests and post-analyses in X-ide OER electrocatalyst publications from 2013 to 2022 is provided. Both mono and polyanion X-ides are discussed and classified with respect to their material transformation during the OER. Special analytical techniques employed to study X-ide reconstruction are also evaluated. Additionally, future challenges and questions yet to be answered are provided in each section. This review aims to provide researchers with a toolkit to approach X-ide OER electrocatalyst research and to showcase necessary avenues for future investigation.

Studying Surface Chemistry of Mixed Conducting Perovskite Oxide Electrodes with Synchrotron-Based Soft X-rays

A fundamental understanding of the electrochemical reactions and surface chemistry at the solid-gas interface in situ and operando is critical for electrode materials applied in electrochemical and catalytic applications. Here, the surface reactions and surface composition of a model of mixed ionic and electronic conducting (MIEC) perovskite oxide, (La0.8Sr0.2)0.95Cr0.5Fe0.5O3-δ (LSCrF8255), were investigated in situ using synchrotron-based near-ambient pressure (AP) X-ray photoelectron spectroscopy (XPS) and near-edge X-ray absorption fine-structure spectroscopy (NEXAFS). The measurements were conducted with a surface temperature of 500 °C under 1 mbar of dry oxygen and water vapor, to reflect the implementation of the materials for oxygen reduction/evolution and H2O electrolysis in the applications such as solid oxide fuel cell (SOFC) and electrolyzers. Our direct experimental results demonstrate that, rather than the transition metal (TM) cations, the surface lattice oxygen is the significant redox active species under both dry oxygen and water vapor environments. It was proven that the electron holes formed in dry oxygen have a strong oxygen character. Meanwhile, a relatively higher concentration of surface oxygen vacancies was observed on the sample measured in water vapor. We further showed that in water vapor, the adsorption and dissociation of H2O onto the perovskite surface were through forming hydroxyl groups. In addition, the concentration of Sr surface species was found to increase over time in dry oxygen due to Sr surface segregation, with the presence of oxygen holes on the surface serving as an additional driving force. Comparatively, less Sr contents were observed on the sample in water vapor, which could be due to the volatility of Sr(OH)2. A secondary phase was also observed, which exhibited an enrichment in B-site cations, particularly in Fe and relatively in Cr, and a deficiency in A-site cation, notably in La and relatively in Sr. The findings and methodology of this study allow for the quantification of surface defect chemistry and surface composition evolution, providing crucial understanding and design guidelines in the electrocatalytic activity and durability of electrodes for efficient conversions of energy and fuels.

3D-Architected Alkaline-Earth Perovskites

3D ceramic architectures are captivating geometrical features with an immense demand in optics. In this work, an additive manufacturing (AM) approach for printing alkaline-earth perovskite 3D microarchitectures is developed. The approach enables custom-made photoresists suited for two-photon lithography, permitting the production of alkaline-earth perovskite (BaZrO3 , CaZrO3 , and SrZrO3 ) 3D structures shaped in the form of octet-truss lattices, gyroids, or inspired architectures like sodalite zeolite, and C60 buckyballs with micrometric and nanometric feature sizes. Alkaline-earth perovskite morphological, structural, and chemical characteristics are studied. The optical properties of such perovskite architectures are investigated using cathodoluminescence and wide-field photoluminescence emission to estimate the lifetime rate and defects in BaZrO3 , CaZrO3 , and SrZrO3 . From a broad perspective, this AM methodology facilitates the production of 3D-structured mixed oxides. These findings are the first steps toward dimensionally refined high-refractive-index ceramics for micro-optics and other terrains like (photo/electro)catalysis.

Activating lattice oxygen in high-entropy LDH for robust and durable water oxidation

The oxygen evolution reaction is known to be a kinetic bottleneck for water splitting. Triggering the lattice oxygen oxidation mechanism (LOM) can break the theoretical limit of the conventional adsorbate evolution mechanism and enhance the oxygen evolution reaction kinetics, yet the unsatisfied stability remains a grand challenge. Here, we report a high-entropy MnFeCoNiCu layered double hydroxide decorated with Au single atoms and O vacancies (AuSA-MnFeCoNiCu LDH), which not only displays a low overpotential of 213 mV at 10 mA cm-2 and high mass activity of 732.925 A g-1 at 250 mV overpotential in 1.0 M KOH, but also delivers good stability with 700 h of continuous operation at ~100 mA cm-2. Combining the advanced spectroscopic techniques and density functional theory calculations, it is demonstrated that the synergistic interaction between the incorporated Au single atoms and O vacancies leads to an upshift in the O 2p band and weakens the metal-O bond, thus triggering the LOM, reducing the energy barrier, and boosting the intrinsic activity.

In situ electrochemical reconstruction of Sr2Fe1.45Ir0.05Mo0.5O6-δ perovskite cathode for CO2 electrolysis in solid oxide electrolysis cells

Solid oxide electrolysis cells provide a practical solution for the direct conversion of CO2 to other chemicals (i.e. CO), however, an in-depth mechanistic understanding of the dynamic reconstruction of active sites for perovskite cathodes during CO2 electrolysis remains a great challenge. Herein, we identify that iridium-doped Sr2Fe1.45Ir0.05Mo0.5O6-δ (SFIrM) perovskite displays a dynamic electrochemical reconstruction feature during CO2 electrolysis with abundant exsolution of highly dispersed IrFe alloy nanoparticles on the SFIrM surface. The in situ reconstructed IrFe@SFIrM interfaces deliver a current density of 1.46 A cm-2 while maintaining over 99% CO Faradaic efficiency, representing a 25.8% improvement compared with the Sr2Fe1.5Mo0.5O6-δ counterpart. In situ electrochemical spectroscopy measurements and density functional theory calculations suggest that the improved CO2 electrolysis activity originates from the facilitated formation of carbonate intermediates at the IrFe@SFIrM interfaces. Our work may open the possibility of using an in situ electrochemical poling method for CO2 electrolysis in practice.

Recent advances of bifunctional catalysts for zinc air batteries with stability considerations: from selecting materials to reconstruction

With the growing depletion of traditional fossil energy resources and ongoing enhanced awareness of environmental protection, research on electrochemical energy storage techniques like zinc-air batteries is receiving close attention. A significant amount of work on bifunctional catalysts is devoted to improving OER and ORR reaction performance to pave the way for the commercialization of new batteries. Although most traditional energy storage systems perform very well, their durability in practical applications is receiving less attention, with issues such as carbon corrosion, reconstruction during the OER process, and degradation, which can seriously impact long-term use. To be able to design bifunctional materials in a bottom-up approach, a summary of different kinds of carbon materials and transition metal-based materials will be of assistance in selecting a suitable and highly active catalyst from the extensive existing non-precious materials database. Also, the modulation of current carbon materials, aimed at increasing defects and vacancies in carbon and electron distribution in metal-N-C is introduced to attain improved ORR performance of porous materials with fast mass and air transfer. Finally, the reconstruction of catalysts is introduced. The review concludes with comprehensive recommendations for obtaining high-performance and highly-durable catalysts.

Improving the durability of cobaltite cathode of solid oxide fuel cells - a review

Solid oxide fuel cells (SOFCs) are highly efficient, low-emission, and fuel-flexible energy conversion devices. However, their commercialization has lagged due to the lack of long-term durability. Among several performance degradation mechanisms, cathode degradation and elemental inter-diffusion of the electrolyte and cathode has been identified as the predominant factors. In the most common SOFC systems, a cobalt-based perovskite material is used, for example LSC or LSCF. These cobalt-based materials offer mixed conductivity and higher concentration of oxygen vacancies as compared to LSM at lower operating temperature leading to favorable reduction kinetics. However, the presence of cobalt results in higher cost, higher thermal expansion co-efficient (TEC) mismatch and most importantly leads to rapid degradation. Various elements like strontium, cobalt, cerium, chromium, or zirconium accumulate or deposit at the electrode-electrolyte interface, which results in sluggish reaction kinetics of the oxygen reduction reaction (ORR). These elements react to form secondary phases that have lower ionic and electronic conductivity, cover active reaction sites, and eventually lead to cell and system deterioration. Over the past decade, several studies have focused on preventative and protective measures to prolong SOFC lifetime which includes novel fabrication techniques, introduction of new layers, addition of thin films to block the cation transport. Such efforts to prevent the formation of insulating phases and decomposition of the cathode have resulted in a remarkable improvement in long-term stability. In this review paper, current research on leading mechanisms responsible for the degradation of cobaltite cathode of solid oxide fuel cell has been summarized and durability improvement strategies of cobalt-based SOFC cathodes have been discussed.

Understanding oxygen evolution mechanisms by tracking charge flow at the atomic level

Current classifications of oxygen evolution catalysts are based on energy levels of the clean catalysts. It is generally asserted that a LOM-catalyst can only follow LOM chemistry in each electron transfer step and that there can be no mixing between AEM and LOM steps without an external trigger. We use ab initio theory to track the charge flow of the water-on-catalyst system and show that the position of water orbitals is pivotal in determining whether an electron transfer step is water dominated oxidation (WDO), lattice-oxygen dominated oxidation (LoDO), or metal dominated oxidation (MDO). Microscopic photo-catalytic pathways of TiO₂ (110), a material whose lattice oxygen bands lie above the metal bands, show that viable OER pathways follow either all AEM steps or mixed AEM-LOM steps. The results provide a correct description of redox chemistries at the atomic level and advance our understanding of how water-splitting catalysts produce desorbed oxygen.

Role of La-based perovskite catalysts in environmental pollution remediation

Since the advent of the industrial revolution, there has been a constant need of efficient catalysts for abatement of industrial toxic pollutants. This phenomenon necessitated the development of eco-friendly, stable, and economically feasible catalytic materials like lanthanum-based perovskite-type oxides (PTOs) having well-defined crystal structure, excellent thermal, and structural stability, exceptional ionic conductivity, redox behavior, and high tunability. In this review, applicability of La-based PTOs in remediation of pollutants, including CO, NO x and VOCs was addressed. A framework for rationalizing reaction mechanism, substitution effect, preparation methods, support, and catalyst shape has been discussed. Furthermore, reactant conversion efficiencies of best PTOs have been compared with noble-metal catalysts for each application. The catalytic properties of the perovskites including electronic and structural properties have been extensively presented. We highlight that a robust understanding of electronic structure of PTOs will help develop perovskite catalysts for other environmental applications involving oxidation or redox reactions.

Electronic and ionic effects of sulphur and other acidic adsorbates on the surface of an SOFC cathode material

The effects of sulphur adsorbates and other typical solid oxide fuel cell (SOFC) poisons on the electronic and ionic properties of an SrO-terminated (La,Sr)CoO₃ (LSC) surface and on its oxygen exchange kinetics have been investigated experimentally with near ambient pressure X-ray photoelectron spectroscopy (NAP-XPS), low energy ion scattering (LEIS) and impedance spectroscopy as well as computationally with density functional theory (DFT). The experiment shows that trace amounts of sulphur in measurement atmospheres form SO^2- ₄ adsorbates and strongly deactivate a pristine LSC surface. They induce a work function increase, indicating a changing surface potential and a surface dipole. DFT calculations reveal that the main participants in these charge transfer processes are not sub-surface transition metals, but surface oxygen atoms. The study further shows that sulphate adsorbates strongly affect oxygen vacancy formation energies in the LSC (sub-)surface, thus affecting defect concentrations and oxygen transport properties. To generalize these results, the investigation was extended to other acidic oxides which are technologically relevant as SOFC cathode poisons, such as CO₂ and CrO₃. The results unveil a clear correlation of work function changes and redistributed charge with the Smith acidity of the adsorbed oxide and clarify fundamental mechanistic details of atomic surface modifications. The impact of acidic adsorbates on various aspects of the oxygen exchange reaction rate is discussed in detail.

Development, dilemma and potential strategies for the application of nanocatalysts in wastewater catalytic ozonation: A review

With the continuous development of nanomaterials in recent years, the application of nanocatalysts in catalytic ozone oxidation has attracted more and more researchers' attention due to their excellent catalytic properties. In this review, we systematically summarized the current research status of nanocatalysts mainly involving material categories, mechanisms and catalytic efficiency. Based on summary and analysis, we found most of the reported nanocatalysts were in the stage of laboratory research, which was caused by the nanocatalysts defects such as easy aggregation, difficult separation, and easy leakage. These defects might result in severe resource waste, economic loss and potentially adverse effects imposed on the ecosystem and human health. Aiming at solving these defects, we further analyzed the reasons and the existing reports, and revealed that coupling nano-catalyst and membrane, supported nanocatalysts and magnetic nanocatalysts had promising potential in solving these problems and promoting the actual application of nanocatalysts in wastewater treatment. Furthermore, the advantages, shortages and our perspectives of these methods are summarized and discussed.

Understanding of Oxygen Redox in the Oxygen Evolution Reaction

The electron-transfer process during the oxygen evolution reaction (OER) often either proceeds solely via a metal redox chemistry (adsorbate evolution mechanism (AEM), with metal bands around the Fermi level) or an oxygen redox chemistry (lattice oxygen oxidation mechanism (LOM), with oxygen bands around the Fermi level). Unlike the AEM, the LOM involves oxygen redox chemistry instead of metal redox, which leads to the formation of a direct oxygen-oxygen (OO) bond. As a result, such a process is able to bypass the rate-determining step, that is, OO bonding, in AEM, which highlights the critical advantage of LOM as compared to the conventional AEM. Thus, it has been well reported that LOM-based catalysts are able to demonstrate higher OER activities as compared to AEM-based catalysts. Here, a comprehensive understanding of the oxygen redox in LOM and all documented and possible characterization techniques that can be used to identify the oxygen redox are reviewed. This review will interpret the origins of oxygen redox in the reported LOM-based electrocatalysts and the underlying science of LOM-induced surface reconstruction in transition metal oxides. Finally, perspectives on the future development of LOM electrocatalysts are also provided.

Surface Exchange Reaction of Mixed Conductive La0.65Ca0.35FeO3-δ during Oxygen Evolution and Incorporation as Traced by Operando X-ray Photoelectron Spectroscopy

High oxygen permeability of mixed conductive La_0.65Ca_0.35FeO_3-δ (LCF) is applicable to pure oxygen gas generators and cathodes for solid oxide fuel cells, etc.; however, lower surface exchange reactions at temperatures below 800 °C reduce permeability. To understand the microscopic surface reaction mechanism, operando soft X-ray photoelectron spectroscopy of an LCF film surface was conducted during the evolution and incorporation of oxygen. LCF film was prepared on yttria-stabilized zirconia and a current was applied throughout the film at ∼600 °C. From operando X-ray photoelectron spectra, surface oxide species involved in the surface exchange reaction obviously appeared on the film during the evolution of oxygen from the surface. The number of surface oxide species abruptly decreased during incorporation of oxygen. By applying the current from a negative to positive value, the numbers of surface oxide species and ligand holes near Fe³⁺ ions on the surface both significantly increased. The results infer that ligand holes in the Fe 3d-O 2p hybrid orbitals correspond to active reaction sites at which surface oxide species change to oxygen molecules. Increasing the number of active reaction sites is key to improving oxygen evolution of mixed conductive oxides.

Atomistic Insights into Activation and Degradation of La0.6Sr0.4CoO3-δ Electrocatalysts under Oxygen Evolution Conditions

The stability of perovskite oxide catalysts for the oxygen evolution reaction (OER) plays a critical role in their applicability in water splitting concepts. Decomposition of perovskite oxides under applied potential is typically linked to cation leaching and amorphization of the material. However, structural changes and phase transformations at the catalyst surface were also shown to govern the activity of several perovskite electrocatalysts under applied potential. Hence, it is crucial for the rational design of durable perovskite catalysts to understand the interplay between the formation of active surface phases and stability limitations under OER conditions. In the present study, we reveal a surface-dominated activation and deactivation mechanism of the prominent electrocatalyst La_0.6Sr_0.4CoO_3−δ under steady-state OER conditions. Using a multiscale microscopy and spectroscopy approach, we identify the evolving Co-oxyhydroxide as catalytically active surface species and La-hydroxide as inactive species involved in the transient degradation behavior of the catalyst. While the leaching of Sr results in the formation of mixed surface phases, which can be considered as a part of the active surface, the gradual depletion of Co from a self-assembled active CoO(OH) phase and the relative enrichment of passivating La(OH)₃ at the electrode surface result in the failure of the perovskite catalyst under applied potential.

Water electrolysis: from textbook knowledge to the latest scientific strategies and industrial developments

Replacing fossil fuels with energy sources and carriers that are sustainable, environmentally benign, and affordable is amongst the most pressing challenges for future socio-economic development. To that goal, hydrogen is presumed to be the most promising energy carrier. Electrocatalytic water splitting, if driven by green electricity, would provide hydrogen with minimal CO2 footprint. The viability of water electrolysis still hinges on the availability of durable earth-abundant electrocatalyst materials and the overall process efficiency. This review spans from the fundamentals of electrocatalytically initiated water splitting to the very latest scientific findings from university and institutional research, also covering specifications and special features of the current industrial processes and those processes currently being tested in large-scale applications. Recently developed strategies are described for the optimisation and discovery of active and durable materials for electrodes that ever-increasingly harness first-principles calculations and machine learning. In addition, a technoeconomic analysis of water electrolysis is included that allows an assessment of the extent to which a large-scale implementation of water splitting can help to combat climate change. This review article is intended to cross-pollinate and strengthen efforts from fundamental understanding to technical implementation and to improve the 'junctions' between the field's physical chemists, materials scientists and engineers, as well as stimulate much-needed exchange among these groups on challenges encountered in the different domains.

Ab Initio Computations of O and AO as well as ReO2, WO2 and BO2-Terminated ReO3, WO3, BaTiO3, SrTiO3 and BaZrO3 (001) Surfaces

We present and discuss the results of surface relaxation and rumpling computations for ReO3, WO3, SrTiO3, BaTiO3 and BaZrO3 (001) surfaces employing a hybrid B3LYP or B3PW description of exchange and correlation. In particular, we perform the first B3LYP computations for O-terminated ReO3 and WO3 (001) surfaces. In most cases, according to our B3LYP or B3PW computations for both surface terminations BO2- and O, AO-terminated ReO3, WO3, BaTiO3, SrTiO3 and BaZrO3 (001) surface upper layer atoms shift downwards, towards the bulk, the second layer atoms shift upwards and the third layer atoms, again, shift downwards. Our ab initio computes that ReO3, WO3, BaTiO3, SrTiO3 and BaZrO3 (001) surface Γ-Γ bandgaps are always smaller than their respective bulk Γ-Γ bandgaps. Our first principles compute that B-O atom chemical bond populations in the BaTiO3, SrTiO3 and BaZrO3 perovskite bulk are always smaller than near their BO2-terminated (001) surfaces. Just opposite, the Re-O and W-O chemical bond populations in the ReO3 (0.212e) and WO3 (0.142e) bulk are slightly larger than near the ReO2 and WO2-terminated ReO3 as well as WO3 (001) surfaces (0.170e and 0.108e, respectively).

Atomically dispersed and oxygen deficient CuO clusters as an extremely efficient heterogeneous catalyst

Preparation of high-density and atomically-dispersed clusters is of great importance yet remains a formidable challenge, which precludes rational design of high-performance, ultrasmall heterogeneous catalysts for alleviating the energy and environmental crises. In this study, we demonstrated an appealing non-equilibrium growth model to give sub-2 nm CuO clusters not from the growth of nuclei but from the top-down growth of metastable bulk crystals. These CuO clusters have high density and intriguingly uniform orientation, and are atomically scattered on an inactive ultrathin AlOOH substrate, which has been driven by the lattice matching between the CuO clusters and the utlrathin AlOOH substrate. The catalytic activity of CuO clusters, with the hydrogenation of 4-nitrophenol as a model reaction, proved to be extremely efficient and showed a rate constant of 130.0 s^-1 g^-1, outperforming the commercial Pd/C catalysts and reported state-of-the-art noble-metal catalysts (1.89-117.2 s^-1 g^-1). These clusters have abundant interfacial oxygen vacancies (OVs) whose concentration can be regulated, and the OVs are found to be essential, according to density functional theory (DFT) calculations, in reducing the energy barrier of catalytic reduction and significantly boosting the catalytic reaction. These findings could add to the library of crystals downsized to the atomic level and demonstrate how engineering point defects on the sub-nanometer materials help design high-efficient catalysts.

High energy storage capabilities of CaCu3Ti4O12 for paper-based zinc-air battery

Zinc–air batteries proffer high energy density and cyclic stability at low costs but lack disadvantages like sluggish reactions at the cathode and the formation of by-products at the cathode. To resolve these issues, a new perovskite material, CaCu₃Ti₄O₁₂ (CCTO), is proposed as an efficacious electrocatalyst for oxygen evolution/reduction reactions to develop zinc–air batteries (ZAB). Synthesis of this material adopted an effective oxalate route, which led to the purity in the electrocatalyst composition. The CCTO material is a proven potential candidate for energy applications because of its high dielectric permittivity (ε) and occupies an improved ORR-OER activity with better onset potential, current density, and stability. The Tafel value for CCTO was obtained out to be 80 mV dec⁻¹. The CCTO perovskite was also evaluated for the zinc–air battery as an air electrode, corresponding to the high specific capacitance of 801 mAh g⁻¹ with the greater cyclic efficiency and minimum variations in both charge/discharge processes. The highest power density (P_max) measured was 127 mW cm⁻². Also, the CCTO based paper battery shows an excellent performance achieving a specific capacity of 614 mAh g⁻¹. The obtained results promise CCTO as a potential and cheap electrocatalyst for energy applications.

Fungal-Mineral Interactions Modulating Intrinsic Peroxidase-like Activity of Iron Nanoparticles: Implications for the Biogeochemical Cycles of Nutrient Elements and Attenuation of Contaminants

Fungal-mediated extracellular reactive oxygen species (ROS) are essential for biogeochemical cycles of carbon, nitrogen, and contaminants in terrestrial environments. These ROS levels may be modulated by iron nanoparticles that possess intrinsic peroxidase (POD)-like activity (nanozymes). However, it remains largely undescribed how fungi modulate the POD-like activity of the iron nanoparticles with various crystallinities and crystal facets. Using well-controlled fungal-mineral cultivation experiments, here, we showed that fungi possessed a robust defect engineering strategy to modulate the POD-like activity of the attached iron minerals by decreasing the catalytic activity of poorly ordered ferrihydrite but enhancing that of well-crystallized hematite. The dynamics of POD-like activity were found to reside in molecular trade-offs between lattice oxygen and oxygen vacancies in the iron nanoparticles, which may be located in a cytoprotective fungal exoskeleton. Together, our findings unveil coupled POD-like activity and oxygen redox dynamics during fungal-mineral interactions, which increase the understanding of the catalytic mechanisms of POD-like nanozymes and microbial-mediated biogeochemical cycles of nutrient elements as well as the attenuation of contaminants in terrestrial environments.

Exsolution constructed FeNi/NiFe2O4 composite: preferentially breaking of octahedral metal-oxygen bonds in spinel oxide

Exsolution is an ingenious strategy for the in situ construction of metal- or alloy-decorated oxides and, due to its promising energy related catalysis applications, has advanced from use in perovskites to use in spinels. Despite its great importance for designing target composites, the ability to identify whether active metal ions at octahedral or tetrahedral sites will preferentially exsolve in a spinel remains unexplored. Here, an inverse spinel NiFe₂O₄ (NFO) was employed as a prototype and FeNi/NFO composites were successfully constructed via exsolution. The preferential breaking of octahedral metal–oxygen bonds in the spinel oxide was directly observed using Mössbauer and X-ray absorption spectroscopy. This was further verified from the negative segregation energies calculated based on density-functional theory. One exsolved FeNi/NFO composite exhibits enhanced electrochemical activity with an overpotential of 283 mV at 10 mA cm⁻² and a long stability time for the oxygen evolution reaction. This work offers a unique insight into spinel exsolution based on the preferential breaking of chemical bonds and may be an effective guide for the design of new composite catalysts where the desired metal ions are deliberately introduced to octahedral and/or tetrahedral sites.

The preferential breaking of octahedral metal–oxygen bonds is exploited to construct an exsolved FeNi/NFO composite for an efficient oxygen evolution reaction.

Emerging Electrocatalysts for Water Oxidation under Near-Neutral CO2 Reduction Conditions

Electrocatalytic CO₂ reduction reaction (CO₂ RR), which produces valuable fuels and chemicals under near-neutral conditions, offers a renewable approach to alleviate the global energy crisis as well as the increasing concerns on climate change. However, to implement this strategy, one of the major challenges, the sluggish kinetics of the paired oxygen evolution reaction (OER) at anode, needs to be surmounted. It is therefore highly desirable to explore high-performance and cost-effective OER electrocatalysts suitable for CO₂ RR conditions, which is very different from those widely investigated under acidic or alkaline conditions. In this review, the ongoing development of OER electrocatalysts under near pH-neutral CO₂ -saturated (bi)carbonate solutions are highlighted and the future opportunities are discussed. It is started with a brief introduction on OER paired with CO₂ RR, the relevant theoretical tools such as density functional theory (DFT) and particularly machine learning (ML), and the operando characterization techniques. Then, there are some detailed discussions of recent progress on the rational design of OER electrocatalysts under CO₂ RR conditions ranging from noble-metal oxides to nonprecious metal phosphides, carbonates, (hydro)oxides, and so on. Finally, a perspective for developing OER electrocatalysts integrated with CO₂ electroreduction is proposed.

Activation of molecular oxygen over Mn-doped La2CuO4 perovskite for direct epoxidation of propylene

The synergetic interaction between manganese and copper in LaMn0.5Cu0.5O3 significantly promoted the epoxidation of propylene at lower temperature by converting the active sites from oxygen vacancies to Cu active sites of Cu–O–Mn.

In Situ Modulation of A-Site Vacancies in LaMnO3.15 Perovskite for Surface Lattice Oxygen Activation and Boosted Redox Reactions

Modulation of A-site defects is crucial to the redox reactions on ABO₃ perovskites for both clean air application and electrochemical energy storage. Herein we report a scalable one-pot strategy for in situ regulation of La vacancies (V_La ) in LaMnO_3.15 by simply introducing urea in the traditional citrate process, and further reveal the fundamental relationship between V_La creation and surface lattice oxygen (O_latt ) activation. The underlying mechanism is shortened Mn-O bonds, decreased orbital ordering, promoted MnO₆ bending vibration and weakened Jahn-Teller distortion, ultimately realizing enhanced Mn-3d and O-2p orbital hybridization. The LaMnO_3.15 with optimized V_La exhibits order of magnitude increase in toluene oxidation and ca. 0.05 V versus RHE (reversible hydrogen electrode) increase of half-wave potential in oxygen reduction reaction (ORR). The reported strategy can benefit the development of novel defect-meditated perovskites in both heterocatalysis and electrocatalysis.

In Situ Growth of Exsolved Nanoparticles under Varying rWGS Reaction Conditions—A Catalysis and Near Ambient Pressure-XPS Study

Perovskite-type oxides are highly flexible materials that show properties that are beneficial for application in reverse water-gas shift processes (rWGS). Due to their stable nature, the ability to incorporate catalytically active dopants in their lattice structure, and the corresponding feature of nanoparticle exsolution, they are promising candidates for a materials design approach. On an industrial level, the rWGS has proven to be an excellent choice for the efficient utilisation of CO2 as an abundant and renewable carbon source, reflected by the current research on novel and improved catalyst materials. In the current study, a correlation between rWGS reaction environments (CO2 to H2 ratios and temperature), surface morphology, and catalytic activity of three perovskite catalysts (Nd0.6Ca0.4Fe0.9Co0.1O3-δ, Nd0.6Ca0.4Fe0.97Co0.03O3-δ, and Nd0.6Ca0.4Fe0.97Ni0.03O3-δ) is investigated, combining catalytic measurements with SEM and NAP-XPS. The materials were found to react dynamically to the conditions showing both activation due to in situ nanoparticle exsolution and deactivation via CaCO3 formation. This phenomenon could be influenced by choice of material and conditions: less reductive conditions (larger CO2 to H2 or lower temperature) lead to smaller exsolved particles and reduced carbonate formation. However, the B-site doping was also important; only with 10% Co-doping, a predominant activation could be achieved.

Migration Kinetics of Surface Ions in Oxygen-Deficient Perovskite During Topotactic Transitions

Oxygen diffusivity and surface exchange kinetics underpin the ionic, electronic, and catalytic functionalities of complex multivalent oxides. Towards understanding and controlling the kinetics of oxygen transport in emerging technologies, it is highly desirable to reveal the underlying lattice dynamics and ionic activities related to oxygen variation. In this study, the evolution of oxygen content is identified in real-time during the progress of a topotactic phase transition in La_0.7 Sr_0.3 MnO_3-δ epitaxial thin films, both at the surface and throughout the bulk. Using polarized neutron reflectometry, a quantitative depth profile of the oxygen content gradient is achieved, which, alongside atomic-resolution scanning transmission electron microscopy, uniquely reveals the formation of a novel structural phase near the surface. Surface-sensitive X-ray spectroscopies further confirm a significant change of the electronic structure accompanying the transition. The anisotropic features of this novel phase enable a distinct oxygen diffusion pathway in contrast to conventional observation of oxygen motion at moderate temperatures. The results provide insights furthering the design of solid oxygen ion conductors within the framework of topotactic phase transitions.

Activating Lattice Oxygen in Perovskite Oxide by B-Site Cation Doping for Modulated Stability and Activity at Elevated Temperatures

Doping perovskite oxide with different cations is used to improve its electro-catalytic performance for various energy and environment devices. In this work, an activated lattice oxygen activity in Pr0.4 Sr0.6 Cox Fe0.9- x Nb0.1 O3- δ (PSCxFN, x = 0, 0.2, 0.7) thin film model system by B-site cation doping is reported. As Co doping level increases, PSCxFN thin films exhibit higher concentration of oxygen vacancies ( V o • • ) as revealed by X-ray diffraction and synchrotron-based X-ray photoelectron spectroscopy. Density functional theory calculation results suggest that Co doping leads to more distortion in FeO octahedra and weaker metaloxygen bonds caused by the increase of antibonding state, thereby lowering V o • • formation energy. As a consequence, PSCxFN thin film with higher Co-doping level presents larger amount of exsolved particles on the surface. Both the facilitated V o • • formation and B-site cation exsolution lead to the enhanced hydrogen oxidation reaction (HOR) activity. Excessive Co doping until 70%, nevertheless, results in partial decomposition of thin film and degrades the stability. Pr0.4 Sr0.6 (Co0.2 Fe0.7 Nb0.1 )O3 with moderate Co doping level displays both good HOR activity and stability. This work clarifies the critical role of B-site cation doping in determining the V o • • formation process, the surface activity, and structure stability of perovskite oxides.

Enhancing the Intrinsic Activity and Stability of Perovskite Cobaltite at Elevated Temperature Through Surface Stress

Perovskite-based oxides attract great attention as catalysts for energy and environmental devices. Nanostructure engineering is demonstrated as an effective approach for improving the catalytic activity of the materials. The mechanism for the enhancement, nevertheless, is still not fully understood. In this study, it is demonstrated that compressive strain can be introduced into freestanding perovskite cobaltite La_0.8 Sr_0.2 CoO_{3- δ} (LSC) nanofibers with sufficient small size. Crystal structure analysis suggests that the LSC fiber is characterized by compressive strain along the ab plane and less distorted CoO₆ octahedron compared to the bulk powder sample. Accompanied by such structural changes, the nanofiber shows significantly higher oxygen reduction reaction (ORR) activity and better stability at elevated temperature, which is attributed to the higher oxygen vacancy concentration and suppressed Sr segregation in the LSC nanofibers. First-principle calculations further suggest that the compressive strain in LSC nanofibers effectively shortens the distance between the Co 3d and O 2p band center and lowers the oxygen vacancy formation energy. The results clarify the critical role of surface stress in determining the intrinsic activity of perovskite oxide nanomaterials. The results of this work can help guide the design of highly active and durable perovskite catalysts via nanostructure engineering.

Trace Key Mechanistic Features of the Arsenite Sequestration Reaction with Nanoscale Zerovalent Iron

Nanoscale zerovalent iron (nZVI) is considered as a highly efficient material for sequestrating arsenite, but the origin of its high efficacy as well as the chemical transformations of arsenite during reaction is not well understood. Here, we report an in situ X-ray absorption spectroscopy (XAS) study to investigate the complex mechanism of nZVI reaction with arsenite under anaerobic conditions at the time scale from seconds to days. The time-resolved XAS analysis revealed a gradual oxidation of As^III to As^V in the course of minutes to hours in both the solid and liquid phase for the high (above 0.5 g/L) nZVI dose system. When the reaction time increased up to 60 days, As^V became the dominant species. The quick-scanning extended X-ray absorption fine structure (QEAXFS) was introduced to discover the transient intermediate at the highly reactive stage, and a small red-shift in As K-edge absorption edge was observed. The QEAXFS combined with density functional theory (DFT) calculation suggested that the red-shift is likely due to the electron donation in a Fe-O-As complex and possible active sites of As sequestrations include Fe(OH)₄ and 4-Fe cluster. This is the first time that the transient reaction intermediate was identified in the As-nZVI sequestration system at the fast-reacting early stage. This study also demonstrated usefulness of in situ monitoring techniques in environmental water research.

Tendencies in ABO3 Perovskite and SrF2, BaF2 and CaF2 Bulk and Surface F-Center Ab Initio Computations at High Symmetry Cubic Structure

We computed the atomic shift sizes of the closest adjacent atoms adjoining the (001) surface F-center at ABO3 perovskites. They are significantly larger than the atomic shift sizes of the closest adjacent atoms adjoining the bulk F-center. In the ABO3 perovskite matrixes, the electron charge is significantly stronger confined in the interior of the bulk oxygen vacancy than in the interior of the (001) surface oxygen vacancy. The formation energy of the oxygen vacancy on the (001) surface is smaller than in the bulk. This microscopic energy distinction stimulates the oxygen vacancy segregation from the perovskite bulk to their (001) surfaces. The (001) surface F-center created defect level is nearer to the (001) surface conduction band (CB) bottom as the bulk F-center created defect level. On the contrary, the SrF2, BaF2 and CaF2 bulk and surface F-center charge is almost perfectly confined to the interior of the fluorine vacancy. The shift sizes of atoms adjoining the bulk and surface F-centers in SrF2, CaF2 and BaF2 matrixes are microscopic as compared to the case of ABO3 perovskites.

Development of Perovskite Oxide-Based Electrocatalysts for Oxygen Evolution Reaction

Perovskite oxides are studied as electrocatalysts for oxygen evolution reactions (OER) because of their low cost, tunable structure, high stability, and good catalytic activity. However, there are two main challenges for most perovskite oxides to be efficient in OER, namely less active sites and low electrical conductivity, leading to limited catalytic performance. To overcome these intrinsic obstacles, various strategies are developed to enhance their catalytic activities in OER. In this review, the recent developments of these strategies is comprehensively summarized and systematically discussed, including composition engineering, crystal facet control, morphology modulation, defect engineering, and hybridization. Finally, perspectives on the design of perovskite oxide-based electrocatalysts for practical applications in OER are given.

GaOx@GaN Nanowire Arrays on Flexible Graphite Paper with Tunable Persistent Photoconductivity

Flexible optoelectronic synaptic devices that functionally imitate the neural behavior with tunable optoelectronic characteristics are crucial to the development of advanced bioinspired neural networks. In this work, amorphous oxide-decorated GaN nanowire arrays (GaO_x@GaN NWAs) are prepared on flexible graphite paper. A GaO_x@GaN NWA-based flexible device has tunable persistent photoconductivity (PPC) and shows a conversible fast/slow decay process (SDP). Photoconductivity can be modulated by single or double light pulses with different illumination powers and biases. PPC gives rise to the high-performance SDP such as a long decay time of 2.3 × 10⁵ s. The modulation mechanism is proposed and discussed. Our results reveal an innovative and efficient strategy to produce decorated NWAs on a flexible substrate with tunable optoelectronic properties and exhibit potential for flexible neuromorphic system applications.

Activation Strategies of Perovskite-Type Structure for Applications in Oxygen-Related Electrocatalysts

The oxygen-related electrochemical process, including the oxygen evolution reaction and oxygen reduction reaction, is usually a kinetically sluggish reaction and thus dominates the whole efficiency of energy storage and conversion devices. Owing to the dominant role of the oxygen-related electrochemical process in the development of electrochemical energy, an abundance of oxygen-related electrocatalysts is discovered. Among them, perovskite-type materials with flexible crystal and electronic structures have been researched for a long time. However, most perovskite materials still show low intrinsic activity, which highlights the importance of activation strategies for perovskite-type structures to improve their intrinsic activity. In this review, the recent progress of the activation strategies for perovskite-type structures is summarized and their related applications in oxygen-related electrocatalysis reactions, including electrochemistry water splitting, metal-air batteries, and solid oxide fuel cells are discussed. Furthermore, the existing challenges and the future perspectives for the designing of ideal perovskite-type structure catalysts are proposed and discussed.

Correlating Surface Crystal Orientation and Gas Kinetics in Perovskite Oxide Electrodes

Solid-gas interactions at electrode surfaces determine the efficiency of solid-oxide fuel cells and electrolyzers. Here, the correlation between surface-gas kinetics and the crystal orientation of perovskite electrodes is studied in the model system La_0.8 Sr_0.2 Co_0.2 Fe_0.8 O₃ . The gas-exchange kinetics are characterized by synthesizing epitaxial half-cell geometries where three single-variant surfaces are produced [i.e., La_0.8 Sr_0.2 Co_0.2 Fe_0.8 O₃ /La_0.9 Sr_0.1 Ga_0.95 Mg_0.05 O_3-δ /SrRuO₃ /SrTiO₃ (001), (110), and (111)]. Electrochemical impedance spectroscopy and electrical conductivity relaxation measurements reveal a strong surface-orientation dependency of the gas-exchange kinetics, wherein (111)-oriented surfaces exhibit an activity >3-times higher as compared to (001)-oriented surfaces. Oxygen partial pressure ( p O 2 )-dependent electrochemical impedance spectroscopy studies reveal that while the three surfaces have different gas-exchange kinetics, the reaction mechanisms and rate-limiting steps are the same (i.e., charge-transfer to the diatomic oxygen species). First-principles calculations suggest that the formation energy of vacancies and adsorption at the various surfaces is different and influenced by the surface polarity. Finally, synchrotron-based, ambient-pressure X-ray spectroscopies reveal distinct electronic changes and surface chemistry among the different surface orientations. Taken together, thin-film epitaxy provides an efficient approach to control and understand the electrode reactivity ultimately demonstrating that the (111)-surface exhibits a high density of active surface sites which leads to higher activity.

Ultrafast Dynamics of Electronic Resonances in Molecules Adsorbed on Metal Surfaces: A Wave Packet Propagation Approach

We present a wave packet propagation-based method to study the electron dynamics in molecular species in the gas phase and adsorbed on metal surfaces. It is a very general method that can be employed to any system where the electron dynamics is dominated by an active electron and the coupling between the discrete and continuum electronic states is of importance. As an example, one can consider resonant molecule-surface electron transfer or molecular photoionization. Our approach is based on a computational strategy allowing incorporating ab initio inputs from quantum chemistry methods, such as density functional theory, Hartree-Fock, and coupled cluster. Thus, the electronic structure of the molecule is fully taken into account. The electron wave function is represented on a three-dimensional grid in spatial coordinates, and its temporal evolution is obtained from the solution of the time-dependent Schrödinger equation. We illustrate our method with an example of the electron dynamics of anionic states localized on organic molecules adsorbed on metal surfaces. In particular, we study resonant charge transfer from the π* orbitals of three vinyl derivatives (acrylamide, acrylonitrile, and acrolein) adsorbed on a Cu(100) surface. Electron transfer between these lowest unoccupied molecular orbitals and the metal surface is extremely fast, leading to a decay of the population of the molecular anion on the femtosecond timescale. We detail how to analyze the time-dependent electronic wave function in order to obtain the relevant information on the system: the energies and lifetimes of the molecule-localized quasistationary states, their resonant wavefunctions, and the population decay channels. In particular, we demonstrate the effect of the electronic structure of the substrate on the energy and momentum distribution of the hot electrons injected into the metal by the decaying molecular resonance.