Efficiency enhancement in low-bandgap polymer solar cells by processing with alkane dithiols

The Nanoscale Structure and Stability of Organic Photovoltaic Blends Processed with Solvent Additives

Controlling the nanomorphology in bulk heterojunction photoactive blends is crucial for optimizing the performance and stability of organic photovoltaic (OPV) technologies. A promising approach is to alter the drying dynamics and consequently, the nanostructure of the blend film using solvent additives such as 1,8-diiodooctane (DIO). Although this approach is demonstrated extensively for OPV systems incorporating fullerene-based acceptors, it is unclear how solvent additive processing influences the morphology and stability of nonfullerene acceptor (NFA) systems. Here, small angle neutron scattering (SANS) is used to probe the nanomorphology of two model OPV systems processed with DIO: a fullerene-based system (PBDB-T:PC71BM) and an NFA-based system (PBDB-T:ITIC). To overcome the low intrinsic neutron scattering length density contrast in polymer:NFA blend films, the synthesis of a deuterated NFA analog (ITIC-d52) is reported. Using SANS, new insights into the nanoscale evolution of fullerene and NFA-based systems are provided by characterizing films immediately after fabrication, after thermal annealing, and after aging for 1 year. It is found that DIO processing influences fullerene and NFA-based systems differently with NFA-based systems characterized by more phase-separated domains. After long-term aging, SANS reveals both systems demonstrate some level of thermodynamic induced domain coarsening.

Role of Charge-Carrier Dynamics Toward the Fabrication of Efficient Air-Processed Organic Solar Cells

Over the past couple of decades, immense research has been carried out to understand the photo-physics of an organic solar cell (OSC) that is important to enhance its efficiency and stability. Since OSCs undergoes complex photophysical phenomenon, studying these factors has led to designing new materials and implementing new strategies to improve efficiency in OSCs. In this regard, the invention of the non-fullerene acceptorshas greatly revolutionized the understanding of the fundamental processes occurring in OSCs. However, such vital fundamental research from device physics perspectives is carried out on glovebox (GB) processed OSCs and there is a scarcity of research on air-processed (AP) OSCs. This review will focus on charge carrier dynamics such as exciton diffusion, exciton dissociation, charge-transfer states, significance of highest occupied molecular orbital-offsets, and hole-transfer efficiencies of GB-OSCs and compare them with the available data from the AP-OSCs. Finally, key requirements for the fabrication of efficient AP-OSCs will be presented from a charge-carrier dynamics perspective. The key aspects from the charge-carrier dynamics view to fabricate efficient OSCs either from GB or air are provided.

Nonfullerene Acceptor Featuring Unique Self-Regulation Effect for Organic Solar Cells with 19 % Efficiency

The blend nanomorphology of electron-donor (D) and -acceptor (A) materials is of vital importance to achieving highly efficient organic solar cells. Exogenous additives especially aromatic additives are always needed to further optimize the nanomorphology of blend films, which is hardly compatible with industrial manufacture. Herein, we proposed a unique approach to meticulously modulate the aggregation behavior of NFAs in both crystal and thin film nanomorphology via self-regulation effect. Nonfullerene acceptor Z9 was designed and synthesized by tethering phenyl groups on the inner side chains of the Y6 backbone. Compared with Y6, the tethered phenyl groups participated in the molecular aggregation via the π-π stacking of phenyl-phenyl and phenyl-2-(5,6-difluoro-3-oxo-2,3-dihydro-1H-inden-1-ylidene)malononitrile (IC-2F) groups, which induced 3D charge transport with phenyl-mediated super-exchange electron coupling. Moreover, ordered molecular packing with suitable phase separation was observed in Z9-based blend films. High power conversion efficiencies (PCEs) of 19.0 % (certified PCE of 18.6 %) for Z9-based devices were achieved without additives, indicating the great potential of the self-regulation strategy in NFA design.

Unraveling the Structure-Property-Performance Relationships of Fused-Ring Nonfullerene Acceptors: Toward a C-Shaped ortho-Benzodipyrrole-Based Acceptor for Highly Efficient Organic Photovoltaics

The high-performance Y6-based nonfullerene acceptors (NFAs) feature a C-shaped A-DA'D-A-type molecular architecture with a central electron-deficient thiadiazole (Tz) A' unit. In this work, we designed and synthesized a new A-D-A-type NFA, termed CB16, having a C-shaped ortho-benzodipyrrole-based skeleton of Y6 but with the Tz unit eliminated. When processed with nonhalogenated xylene without using any additives, the binary PM6:CB16 devices display a remarkable power conversion efficiency (PCE) of 18.32% with a high open-circuit voltage (Voc) of 0.92 V, surpassing the performance of the corresponding Y6-based devices. In contrast, similarly synthesized SB16, featuring an S-shaped para-benzodipyrrole-based skeleton, yields a low PCE of 0.15% due to the strong side-chain aggregation of SB16. The C-shaped A-DNBND-A skeleton in CB16 and the Y6-series NFAs constitutes the essential structural foundation for achieving exceptional device performance. The central Tz moiety or other A' units can be employed to finely adjust intermolecular interactions. The single-crystal X-ray structure reveals that ortho-benzodipyrrole-embedded A-DNBND-A plays an important role in the formation of a 3D elliptical network packing for efficient charge transport. Solution structures of the PM6:NFAs detected by small- and wide-angle X-ray scattering (SWAXS) indicate that removing the Tz unit in the C-shaped skeleton could reduce the self-packing of CB16, thereby enhancing the complexing and networking with PM6 in the spin-coating solution and the subsequent device film. Elucidating the structure-property-performance relationships of A-DA'D-A-type NFAs in this work paves the way for the future development of structurally simplified A-D-A-type NFAs.

Plasticizer-Induced Enhancement of Mesoscale Dissymmetry in Thin Films of Chiral Polymers with Variable Chain Length

Conjugated polymers with chiral side chains are of interest in areas including chiral photonics, optoelectronics, and chemical and biological sensing. However, the low dissymmetry factors of most neat polymer thin films have limited their practical application. Here, a robust method to increase the absorption dissymmetry factor in a poly-fluorene-thiophene (PF8TS series) system is demonstrated by varying molecular weight and introducing an achiral plasticizer, polyethylene mono alcohol (PEM-OH). Extending chain length within the optimal range and adding this long-chain alcohol significantly enhance the chiroptical properties of spin-coated and annealed thin films. Mueller matrix spectroscopic ellipsometry (MMSE) analysis shows good agreement with the steady-state transmission measurements confirming a strong chiral response (circular dichroism (CD) and circular birefringence (CB)), ruling out linear dichroism, birefringence, and specific reflection effects. Solid-state NMR studies of annealed hybrid chiral polymer systems show enhancement of signals associated with aromatic π-stacked backbone and the ordered side-chain conformations. Further studies using Raman spectroscopy, X-ray diffraction (XRD), differential scanning calorimetry (DSC), atomic force microscopy (AFM), and polarized optical microscopy (POM) indicate that PEM-OH facilitates mesoscopic crystal domain ordering upon annealing. This provides new insights into routes for tuning optical activity in conjugated polymers.

Additive-free molecular acceptor organic solar cells processed from a biorenewable solvent approaching 15% efficiency

We report on the use of molecular acceptors (MAs) and donor polymers processed with a biomass-derived solvent (2-methyltetrahydrofuran, 2-MeTHF) to facilitate bulk heterojunction (BHJ) organic photovoltaics (OPVs) with power conversion efficiency (PCE) approaching 15%. Our approach makes use of two newly designed donor polymers with an opened ring unit in their structures along with three molecular acceptors (MAs) where the backbone and sidechain were engineered to enhance the processability of BHJ OPVs using 2-MeTHF, as evaluated by an analysis of donor-acceptor (D-A) miscibility and interaction parameters. To understand the differences in the PCE values that ranged from 9-15% as a function of composition, the surface, bulk, and interfacial BHJ morphologies were characterized at different length scales using atomic force microscopy, grazing-incidence wide-angle X-ray scattering, resonant soft X-ray scattering, X-ray photoelectron spectroscopy, and 2D solid-state nuclear magnetic resonance spectroscopy. Our results indicate that the favorable D-A intermixing that occurs in the best performing BHJ film with an average domain size of ∼25 nm, high domain purity, uniform distribution and enhanced local packing interactions - facilitates charge generation and extraction while limiting the trap-assisted recombination process in the device, leading to high effective mobility and good performance.

Acceptor-Induced Fluorescence of Phenolic Polymers Based on Triphenylamine Derivatives

Conductive polymers facilitate the electrical current flow through the transfer of electrons and holes. They show promise for novel photo-functional materials in photovoltaics. However, substantial electrostatic interactions between electron donors and acceptors induce polymer aggregation, limiting moldability and conductivity. In this study, robust donor polymers with high heat resistance were synthesized by bonding triphenylamine (TPA) derivatives and formaldehyde to phenolic groups. Resulting TPA-based phenolic polymers exhibited flexible structures and fluorescence due to charge transfer with acceptor molecules. Furthermore, TPA-based phenolic polymers' capacity to distinguish acceptor molecule sizes correlated with their molecular weight, reflecting upon donor-acceptor interactions. This novel optical trait in phenolic polymers holds potential for electronic components and conductive materials.

Improving Cooperative Interactions Between Halogenated Aromatic Additives and Aromatic Side Chain Acceptors for Realizing 19.22% Efficiency Polymer Solar Cells

Processing additive plays an important role in the standard operation procedures for fabricating top performing polymer solar cells (PSCs) through efficient interactions with key photovoltaic materials. However, improving interaction study of acceptor materials to high performance halogenated aromatic additives such as diiodobenzene (DIB) is a widely neglected route for molecular engineering toward more efficient device performances. In this work, two novel Y-type acceptor molecules of BTP-TT and BTP-TTS with different aromatic side chains on the outer positions are designed and synthesized. The resulting aromatic side chains significantly enhanced the interactions between the acceptor molecules and DIB through an arene/halogenated arene interaction, which improved the crystallinity of the acceptor molecules and induced a polymorph with better photovoltaic performances. Thus, high power conversion efficiencies (PCEs) of 18.04% and 19.22% are achieved in binary and ternary blend devices using BTP-TTS as acceptor and DIB as additive. Aromatic side chain engineering for improving additive interactions is proved to be an effective strategy for achieving much higher performance photovoltaic materials and devices.

Charge Carrier Dynamics in Non-Fullerene Acceptor-Based Organic Solar Cells: Investigating the Influence of Processing Additives Using Transient Absorption Spectroscopy

In this study, we present a comprehensive investigation into the charge generation mechanism in bulk-heterojunction organic solar cells employing non-fullerene acceptors (NFAs) both with and without the presence of processing additives. While photovoltaic devices based on Y6 or BTP-eC9 have shown remarkable power conversion efficiencies, the underlying charge generation mechanism in polymer:NFA blends remains poorly understood. To shed light on this, we employ transient absorption (TA) spectroscopy to elucidate the charge transfer pathway within a blend of the donor polymer PM6 and NFAs. Interestingly, the charge carrier lifetimes of neat Y6 and BTP-eC9 are comparable, both reaching up to 20 ns. However, the PM6:BTP-eC9 blend exhibits substantially higher charge carrier generation and a longer carrier lifetime compared to PM6:Y6 blend films, leading to superior performance. By comparing TA data obtained from PM6:Y6 or PM6:BTP-eC9 blend films with and without processing additives, we observe significantly enhanced charge carrier generation and prolonged charge carrier lifetimes in the presence of these additives. These findings underscore the potential of manipulating excited species as a promising avenue for further enhancing the performance of organic solar cells. Moreover, this understanding contributes to the advancement of NFA-based systems and the optimization of charge transfer processes in polymer:NFA blends.

Intramolecular Palladium Catalyst Transfer on Benzoheterodiazoles as Acceptor Monomers and Discovery of Catalyst Transfer Inhibitors

Intramolecular catalyst transfer on benzoheterodiazoles was investigated in Suzuki-Miyaura coupling reactions and polymerization reactions with t Bu3 PPd precatalyst. In the coupling reactions of dibromobenzotriazole, dibromobenzoxazole, and dibromobenzothiadiazole with pinacol phenylboronate, the product ratios of monosubstituted product to disubstituted product were 0/100, 27/73, and 89/11, respectively, indicating that the Pd catalyst undergoes intramolecular catalyst transfer on dibromobenzotriazole, whereas intermolecular transfer occurs in part in the case of dibromobenzoxazole and is predominant for dibromobenzothiadiazole. The polycondensation of 1.3 equivalents of dibromobenzotriazole with 1.0 equivalent of para- and meta-phenylenediboronates afforded high-molecular-weight polymer and cyclic polymer, respectively. In the case of dibromobenzoxazole, however, para- and meta-phenylenediboronates afforded moderate-molecular-weight polymer with bromine at both ends and cyclic polymer, respectively. In the case of dibromobenzothiadiazole, they afforded low-molecular-weight polymers with bromine at both ends. Addition of benzothiadiazole derivatives interfered with catalyst transfer in the coupling reactions.

Phase Behavior and Role of Organic Additives for Self-Doped CsPbI3 Perovskite Semiconductor Thin Films

The phase change of all-inorganic cesium lead halide (CsPbI3) thin film from yellow δ-phase to black γ-/α-phase has been a topic of interest in the perovskite optoelectronics field. Here, the main focus is how to secure a black perovskite phase by avoiding a yellow one. In this work, we fabricated a self-doped CsPbI3 thin film by incorporating an excess cesium iodide (CsI) into the perovskite precursor solution. Then, we studied the effect of organic additive such as 1,8-diiodooctane (DIO), 1-chloronaphthalene (CN), and 1,8-octanedithiol (ODT) on the optical, structural, and morphological properties. Specifically, for elucidating the binary additive-solvent solution thermodynamics, we employed the Flory-Huggins theory based on the oligomer level of additives' molar mass. Resultantly, we found that the miscibility of additive-solvent displaying an upper critical solution temperature (UCST) behavior is in the sequence CN:DMF > ODT:DMF > DIO:DMF, the trends of which could be similarly applied to DMSO. Finally, the self-doping strategy with additive engineering should help fabricate a black γ-phase perovskite although the mixed phases of δ-CsPbI3, γ-CsPbI3, and Cs4PbI6 were observed under ambient conditions. However, the results may provide insight for the stability of metastable γ-phase CsPbI3 at room temperature.

A theoretical study of the time-resolved x-ray absorption spectrum of the photoionized BT-1T cation

The time-resolved x-ray absorption spectrum of the BT-1T cation (BT-1T+) is theoretically simulated in order to investigate the charge transfer reaction of the system. We employ both trajectory surface hopping and quantum dynamics to simulate the structural evolution over time and the changes in the state populations. To compute the static x-ray absorption spectra (XAS) of the ground and excited states, we apply both the time-dependent density functional theory and the coupled cluster singles and doubles method. The results obtained are in good agreement between the methods. It is, furthermore, found that the small structural changes that occur during the reaction have little effect on the static XAS. Hence, the tr-XAS can be computed based on the state populations determined from a nuclear dynamics simulation and one set of static XAS calculations, utilizing the ground state optimized geometry. This approach can save considerable computational resources, as the static spectra need not to be calculated for all geometries. As BT-1T is a relatively rigid molecule, the outlined approach should only be considered when investigating non-radiative decay processes in the vicinity of the Franck-Condon point.

Raman Snapshots of Side-Chain Dependent Polaron Dynamics in PolyThiophene Films

Photogenerated polarons in π-conjugated polymers are the precursors to free charges at donor-acceptor interfaces. Unraveling the relationship between film morphology and polaron formation is conjectured to enable efficient charge generation in organic photovoltaic devices. However, it has been challenging to track the ultrafast dynamics of polarons selectively and thus evaluate the molecular coordinates that drive charge generation in films. Using a combination of broadband femtosecond transient absorption and resonance-selective femtosecond stimulated Raman spectroscopy, here, we investigate the polaron generation dynamics exclusively in traditional crystalline poly(3-hexylthiophene) (P3HT) and its amorphous side-chain variant poly(3-(2-ethylhexyl)thiophene-2,5-diyl) (P3EHT) films. The transient Raman data unequivocally provides evidence for an initial delocalization of the polaronic states via thiophene backbone planarization in ∼100 fs while capturing the subsequent morphology-dependent cooling dynamics in a few picoseconds. Our work highlights the structural significance of crystalline morphology in generating hot-charges and thereby emphasizes the importance of side-chain engineering in designing highly efficient conjugated polymer films for hot-carrier photovoltaic devices.

Effective Approach toward Selective Near-Infrared Dyes: Rational Design, Synthesis, and Characterization of Thieno[3,4-b]thiophene-Based Quinoidal Oligomers

This paper describes syntheses, photophysical properties, and electrochemical characteristics of three thieno[3,4-b]thiophene (TT)-based quinoidal oligomers OnTTO. The rigid planar backbones of these oligomers give the molecules narrow absorption bands, and the main absorption bands were significantly red-shifted when the TT units were extended and demonstrated wide transparent windows. The compound O4TTO was found to possess strong absorption in the near-infrared (NIR) region approaching 1200 nm but remained transparent in the visible region. Electrochemical experiments have shown that the energy band gaps gradually narrow when the TT units are increased. Optical properties predicted by density functional theory calculations are in good agreement with the experimental optical results. These dye molecules could be promising candidates for future NIR photodetectors, filters, and bioimaging technologies.

Modification of the Surface Composition of PTB7-Th: ITIC Blend Using an Additive

We investigated the effect of adding p-anisaldehyde (AA) solvent to the ink containing poly[[2,60-4,8-di(5-ethylhexylthienyl)benzo[1,2-b:3,3-b]dithiophene][3-fluoro-2[(2-ethylhexyl)carbonyl]thieno[3,4-b]thiophenediyl]](PTB7-Th) and 3,9-bis(2-methylene-(3-(1,1-dicyanomethylene)-indanone))-5,5,11,11-tetrakis(4-hexylphenyl)-dithieno[2,3-d:20,30-d0]-s-indaceno[1,2-b:5,6-b0]-dithiophene(ITIC) on the morphology of the active layer. The present study focuses on determining the effect of the additive on the compositions at the surface of the PTB7-Th: ITIC composite and its morphology, forming one side of the interface of the blend with the MoO_X electrode, and the influence of the structural change on the performance of devices. Studies of device performance show that the addition of the additive AA leads to an improvement in device performance. Upon the addition of AA, the concentration of PTB7-Th at the surface of the bulk heterojunction (BHJ) increases, causing an increase in surface roughness of the surface of the BHJ. This finding contributes to an understanding of the interaction between the donor material and high work function electrode/interface material. The implications for the interface are discussed.

Biocompatible Ionic Liquids in High-Performing Organic Electrochemical Transistors for Ion Detection and Electrophysiological Monitoring

Organic electrochemical transistors (OECTs) have recently attracted attention due to their high transconductance and low operating voltage, which makes them ideal for a wide range of biosensing applications. Poly-3,4-ethylenedioxythiophene:poly-4-styrenesulfonate (PEDOT:PSS) is a typical material used as the active channel layer in OECTs. Pristine PEDOT:PSS has poor electrical conductivity, and additives are typically introduced to improve its conductivity and OECT performance. However, these additives are mostly either toxic or not proven to be biocompatible. Herein, a biocompatible ionic liquid [MTEOA][MeOSO₃] is demonstrated to be an effective additive to enhance the performance of PEDOT:PSS-based OECTs. The influence of [MTEOA][MeOSO₃] on the conductivity, morphology, and redox process of PEDOT:PSS is investigated. The PEDOT:PSS/[MTEOA][MeOSO₃]-based OECT exhibits high transconductance (22.3 ± 4.5 mS μm^-1), high μC* (the product of mobility μ and volumetric capacitance C*) (283.80 ± 29.66 F cm^-1 V^-1 s^-1), fast response time (∼40.57 μs), and excellent switching cyclical stability. Next, the integration of sodium (Na⁺) and potassium (K⁺) ion-selective membranes with the OECTs is demonstrated, enabling selective ion detection in the physiological range. In addition, flexible OECTs are designed for electrocardiography (ECG) signal acquisition. These OECTs have shown robust performance against physical deformation and successfully recorded high-quality ECG signals.

Achieving Record-Efficiency Organic Solar Cells upon Tuning the Conformation of Solid Additives

Volatile solid additives (SADs) are considered as a simple yet effective approach to tune the film morphology for high-performance organic solar cells (OSCs). However, the structural effects of the SADs on the photovoltaic performance are still elusive. Herein, two volatilizable SADs were designed and synthesized. One is SAD1 with twisted conformation, while the other one is planar SAD2 with the S···O noncovalent intramolecular interactions (NIIs). The theoretical and experimental results revealed that the planar SAD2 with smaller space occupation can more easily insert between the Y6 molecules, which is beneficial to form a tighter intermolecular packing mode of Y6 after thermal treatment. As a result, the SAD2-treated OSCs exhibited less recombination loss, more balanced charge mobility, higher hole transfer rate, and more favorable morphology, resulting in a record power conversion efficiency (PCE) of 18.85% (certified PCE: 18.7%) for single-junction binary OSCs. The universality of this study shed light on understanding the conformation effects of SADs on photovoltaic performances of OSCs.

Synthesis of n-Type [60]Fullerene Derivatives with Sterically Bulky tert-Butyl Groups for Vacuum Deposition Processes

[60]Fullerene derivatives with high thermal stability can be used for  vacuum deposition   under heating to fabricate thin films for organic electronic devices. Here we investigated the thermal stability of [60]fullerene derivatives   with various bulky substituents for thermal  evaporation under vacuum by means of thermogravimetric analysis under reduced and normal pressure. We found sterically bulky groups such as  tert -butyl groups of [60]fullerene derivatives lowered the vacuum deposition temperature. Also, we performed isothermal thermogravimetric analysis   to examine the long-term thermal stability of the designed compounds under heating conditions. Furthermore,  we investigated the UV-Vis absorption patterns of the deposited films. Absorption in the blue wavelength range, which was attributed to intermolecular HOMO-LUMO transitions among the molecular orbitals of adjacent [60]fullerenes, was dramatically modified. These results were associated with the prevention of aggregation among neighboring [60]fullerene by the sterically bulky groups. This concept could contribute to expanding the use of evaporable [60]fullerene derivatives in organic thin-film electronics research fields.

2D Covalent Organic Frameworks: From Synthetic Strategies to Advanced Optical-Electrical-Magnetic Functionalities

Covalent organic frameworks (COFs), an emerging class of organic crystalline polymers with highly oriented structures and permanent porosity, can adopt 2D or 3D architectures depending on the different topological diagrams of the monomers. Notably, 2D COFs have particularly gained much attention due to the extraordinary merits of their extended in-plane π-conjugation and topologically ordered columnar π-arrays. These properties together with high crystallinity, large surface area, and tunable porosity distinguish 2D COFs as an ideal candidate for the fabrication of functional materials. Herein, this review surveys the recent research advances in 2D COFs with special emphasis on the preparation of 2D COF powders, single crystals, and thin films, as well as their advanced optical, electrical, and magnetic functionalities. Some challenging issues and potential research outlook for 2D COFs are also provided for promoting their development in terms of structure, synthesis, and functionalities.

Recent Progress in Organic Solar Cells: A Review on Materials from Acceptor to Donor

In the last few decades, organic solar cells (OSCs) have drawn broad interest owing to their advantages such as being low cost, flexible, semitransparent, non-toxic, and ideal for roll-to-roll large-scale processing. Significant advances have been made in the field of OSCs containing high-performance active layer materials, electrodes, and interlayers, as well as novel device structures. Particularly, the innovation of active layer materials, including novel acceptors and donors, has contributed significantly to the power conversion efficiency (PCE) improvement in OSCs. In this review, high-performance acceptors, containing fullerene derivatives, small molecular, and polymeric non-fullerene acceptors (NFAs), are discussed in detail. Meanwhile, highly efficient donor materials designed for fullerene- and NFA-based OSCs are also presented. Additionally, motivated by the incessant developments of donor and acceptor materials, recent advances in the field of ternary and tandem OSCs are reviewed as well.

Conjugated Mesopolymer Achieving 15% Efficiency Single-Junction Organic Solar Cells

The high-performance organic solar cells (OSCs) tend to choose the polymers with high molecular weight as donors, which easily produce good crystallinity to facilitate intermolecular charge transfer. However, these polymers usually accompanied by the low solubility and synthetic difficulty, increasing batch-to-batch variations. The proposal of conjugated mesopolymers (molar mass (M_n ) in 1-10 kDa) can overcome these problems. Herein, a new mesopolymer, MePBDFCl_H as donor material is designed and synthesized, and firstly applied in OSCs. As a comparison, other lower molecular weight mesopolymer of MePBDFCl_L and higher molecular weight polymer of PBDFCl with same structure are also prepared and investigated. Because of its appropriate phase separation and miscibility in the blend film, the MePBDFCl_H exhibits the highest power conversion efficiency (PCE) of 15.06% among the three materials. Meanwhile, the champion PCE is a new record for benzo[1,2-b:4,5-b']difuran-based photovoltaic materials. Importantly, comparing to the pronounced PCE decrease of polymer PBDFCl by about 12%, a slightly PCE difference for mespolymer MePBDFCl_L is only less than 5%, reducing the batch-to-batch variation. This work not only suggests that the benzo[1,2-b:4,5-b']difuran unit is a promising electron-donating core but also shows that the mesopolymers have great potentials to produce the low-differentiated and high-performance organic photovoltaic materials.

Studies on the Structure, Optical, and Electrical Properties of Doped Manganese (III) Phthalocyanine Chloride Films for Optoelectronic Device Applications

In the last few years, significant advances have been achieved in the development of organic semiconductors for use in optoelectronic devices. This work reports the doping and deposition of semiconducting organic thin films based on manganese (III) phthalocyanine chloride (MnPcCl). In order to enhance the semiconducting properties of the MnPcCl films, different types of pyridine-based chalcones were used as dopants, and their influence on the optical and electric properties of the films was analyzed. The morphology and structure of the films were studied using IR spectroscopy and scanning electron microscopy (SEM). Optical properties of MnPcCl–chalcone films were investigated via UV–Vis spectroscopy, and the absorption spectra showed the Q band located between 630 and 800 nm, as well as a band related to charge transfer (CT) in the region between 465 and 570 nm and the B band in the region between 280 and 460 nm. Additionally, the absorption coefficient measurements indicated that the films had an indirect transition with two energy gaps: the optical bandgap of around 1.40 eV and the fundamental gap of around 2.35 eV. The electrical behavior is strongly affected by the type of chalcone employed; for this reason, electrical conductivity at room temperature may vary from 1.55 × 10−5 to 3.02 × 101 S·cm−1 at different voltages (0.1, 0.5, and 1.0 V). Additionally, the effect of temperature on conductivity was also measured; electrical conductivity increases by two orders of magnitude with increasing temperature from 25 to 100 °C. The doping effect of chalcone favors electronic transport, most likely due to its substituents and structure with delocalized π-electrons, the formation of conduction channels caused by anisotropy, and the bulk heterojunction induced by the dopant. In terms of optical and electrical properties, the results suggest that the best properties are obtained with chalcones that have the methoxy group as a substituent. However, all MnPcCl–chalcone films are candidates for use in optoelectronic devices.

Studies of New 2,7-Carbazole (CB) Based Donor-Acceptor-Donor (D-A-D) Monomers as Possible Electron Donors in Polymer Solar Cells by DFT and TD-DFT Methods

The new donor-acceptor-donor (D-A-D) monomers have been studied using density functional theory (DFT) and time-dependent density functional theory (TD-DFT) methods to evaluate the optoelectronic and electronic properties for bulk heterojunction (BHJ) organic solar cells. The TD-DFT method is combined with a hybrid exchange-correlation functional using the B3LYP method in conjunction with a polarizable continuum model (PCM) and a 6-311G basis set to predict the excitation energies and absorption spectra of all monomers. The predicted bandgap (Eg ) of the monomers decreasing in the following order D1 Collapse

Key Words

• 2,7-carbazole
• D-A-D monomers
• DFT/TD-DFT method
• Optoelectronic properties
• open-circuit voltage

Collapse

MESH Headings Collapse

Grants Collapse

Affiliation(s)

Numbury Surendra Babu Computational Quantum Chemistry LabDepartment of ChemistryCollege of Natural and Mathematical SciencesThe University of DodomaDonomaTanzania

Collapse

Strong Bathochromic Shift of Conjugated Polymer Nanowires Assembled with a Liquid Crystalline Alkyl Benzoic Acid via a Film Dispersion Process

We present aqueous dispersions of conjugated polymer nanowires (CPNWs) with improved light absorption properties aimed at aqueous-based applications. We assembled films of a donor-acceptor-type conjugated polymer and liquid crystalline 4-n-octylbenzoic acid by removing a cosolvent of their mixture solutions, followed by annealing of the films, and then formed aqueous-dispersed CPNWs with an aspect ratio >1000 by dispersing the films under ultrasonication at a basic pH. X-ray and spectroscopy studies showed that the polymer and liquid crystal molecules form independent domains in film assemblies and highly organized layer structures in CPNWs. Our ordered molecular assemblies in films and aqueous dispersions of CPNWs open up a new route to fabricate nanowires of low-band-gap linear conjugated polymers with the absorption maximum at 794 nm remarkably red-shifted from 666 nm of CPNWs prepared by an emulsion process. Our results suggest the presence of semicrystalline polymorphs β1 and β2 phases in CPNWs due to long-range π-π stacking of conjugated backbones in compactly organized lamellar structures. The resulting delocalization with a reduced energy bang gap should be beneficial for enhancing charge transfer and energy-conversion efficiencies in aqueous-based applications such as photocatalysis.

Solar Energy in the United States: Development, Challenges and Future Prospects

The ambitious target of net-zero emission by 2050 has been aggressively driving the renewable energy sector in many countries. Leading the race of renewable energy sources is solar energy, the fastest growing energy source at present. The solar industry has witnessed more growth in the last decade than it has in the past 40 years, owing to its technological advancements, plummeting costs, and lucrative incentives. The United States is one of the largest producers of solar power in the world and has been a pioneer in solar adoption, with major projects across different technologies, mainly photovoltaic, concentrated solar power, and solar heating and cooling, but is expanding towards floating PV, solar combined with storage, and hybrid power plants. Although the United States has tremendous potential for exploiting solar resources, there is a scarcity of research that details the U.S. solar energy scenario. This paper provides a comprehensive review of solar energy in the U.S., highlighting the drivers of the solar industry in terms of technology, financial incentives, and strategies to overcome challenges. It also discusses the prospects of the future solar market based on extensive background research and the latest statistics. In addition, the paper categorizes the U.S. states into five tiers based on their solar prospects calculated using analytical hierarchy process and regression analysis. The price of solar technologies in the U.S. is also predicted up to 2031 using Wright’s law, which projected a 77% reduction in the next decade.

Direct Observations of Uniform Bulk Heterojunctions and the Energy Level Alignments in Nonfullerene Organic Photovoltaic Active Layers

State-of-the-art organic photovoltaic (OPV) cells rely on the engineering of the energy levels of the organic molecules as well as the bulk-heterojunction nanomorphology to achieve high performance. However, both are difficult to measure inside the active layer where the electron donor and acceptor molecules are mingled. While the energy level alignments of the lowest unoccupied molecular orbital (LUMO) and highest occupied molecular orbital (HOMO) between the electron donors and acceptors may be altered in the mixed active layer compared to their pure forms, the nanomorphology of the donor and acceptor molecular domains is mostly studied in indirect means. Here, we present the direct observations of the nanomorphology of the molecular domains as well as the energy level alignments in the active layer of a nonfullerene-based OPV (donor: PBDB-T-2F and acceptor: IT-4Cl) using cross-sectional scanning tunneling microscopy and spectroscopy (XSTM/S). It is revealed that (1) the bulk-heterojunction (BHJ) structures are homogeneous and uniform throughout the ∼1.2 μm thick active layer; (2) the energy alignments between the donor-rich and acceptor-rich domains are directly observed; (3) there exist the intermixing domains at the boundaries of the donor-rich and acceptor-rich domains with thickness in the nm scale; (4) the exciton binding energies in PBDB-T-2F and IT-4Cl are estimated to be 0.74 and 0.32 eV, respectively; and (5) there is an ∼0.7 V loss in the open circuit voltage. The results provide a nanoscale understanding of the OPV active layers to guide further improvement of the OPV performance.

Skin-like hydrogel devices for wearable sensing, soft robotics and beyond

Skin-like electronics are developing rapidly to realize a variety of applications such as wearable sensing and soft robotics. Hydrogels, as soft biomaterials, have been studied intensively for skin-like electronic utilities due to their unique features such as softness, wetness, biocompatibility and ionic sensing capability. These features could potentially blur the gap between soft biological systems and hard artificial machines. However, the development of skin-like hydrogel devices is still in its infancy and faces challenges including limited functionality, low ambient stability, poor surface adhesion, and relatively high power consumption (as ionic sensors). This review aims to summarize current development of skin-inspired hydrogel devices to address these challenges. We first conduct an overview of hydrogels and existing strategies to increase their toughness and conductivity. Next, we describe current approaches to leverage hydrogel devices with advanced merits including anti-dehydration, anti-freezing, and adhesion. Thereafter, we highlight state-of-the-art skin-like hydrogel devices for applications including wearable electronics, soft robotics, and energy harvesting. Finally, we conclude and outline the future trends.

Rational Design and Characterization of Symmetry-Breaking Organic Semiconductors in Polymer Solar Cells: A Theory Insight of the Asymmetric Advantage

Asymmetric molecule strategy is considered an effective method to achieve high power conversion efficiency (PCE) of polymer solar cells (PSCs). In this paper, nine oligomers are designed by combining three new electron-deficient units (unitA)-n1, n2, and n3-and three electron-donating units (unitD)-D, E, and F-with their π-conjugation area extended. The relationships between symmetric/asymmetric molecule structure and the performance of the oligomers are investigated using the density functional theory (DFT) and time-dependent density functional theory (TD-DFT) calculations. The results indicate that asymmetry molecule PEn2 has the minimum dihedral angle in the angle between two planes of unitD and unitA among all the molecules, which exhibited the advantages of asymmetric structures in molecular stacking. The relationship of the values of ionization potentials (IP) and electron affinities (EA) along with the unitD/unitA π-extend are revealed. The calculated reorganization energy results also demonstrate that the asymmetric molecules PDn2 and PEn2 could better charge the extraction of the PSCs than other molecules for their lower reorganization energy of 0.180 eV and 0.181 eV, respectively.

Molecular Understanding of How the Interfacial Structure Impacts the Open-Circuit Voltage of Highly Crystalline Polymer Solar Cells

Herein, we study the origin of differences in open-circuit voltage (V_OC) for polymer:fullerene solar cells employing highly crystalline conjugated polymers (PTzBT) based on the same thiophene-thiazolothiazole backbone with different side chains. By analyzing the temperature dependence of V_OC and cyclic voltammogram, we find that the difference in V_OC originates in the different cascaded energy structures for the highest occupied molecular orbital (HOMO) levels in the interfacial mixed phase. Furthermore, we find that this is due to the stabilization of HOMO caused by the different branching of side chains on the basis of density functional theory calculation. Finally, we discuss the molecular design strategy based on side-chain engineering for ideal interfacial cascaded energy structures leading to higher V_OC and photocurrent simultaneously.

Carrier losses in non-geminate charge-transferred states of nonfullerene acceptor-based organic solar cells

To understand the current limitations of nonfullerene-based organic solar cells (OSCs), the early-time dynamics of the carrier generation in the high performance bulk heterojunction (BHJ) blend of a semiconducting polymer, PBDB-T, and the low bandgap nonfullerene acceptor, ITIC-m, are investigated. After photoexcitation, photo-induced excitons are separated through the ultrafast (~200 fs) electron transfer process from PBDB-T to ITIC-m and through the fast (3-6 ps) hole transfer process from ITIC-m to PBDB-T. However, a part of the separated charges recombines in the non-geminate (long-range) charge-transferred (CT) states. The yield of mobile carriers is correspondingly decreased by recombination in the CT states. In our measurements, the carrier recombination loss in the CT state is decreased by optimizing the BHJ morphology, especially for showing better electron mobility using a processing additive (1,8-diiodooctane) during the fabrication of the composite film, as evidenced by the decreased CT band intensity at ~30 ps and the increased polaron band intensity, which eventually improve power conversion efficiencies (PCEs).

Development of low bandgap polymers for red and near-infrared fullerene-free organic photodetectors

Two low bandgap donor polymers, PDTPTT and PCPDTTT, were synthesized and their photodetecting properties were investigated under a 680 nm red LED.