Bonding dissimilar polymer networks in various manufacturing processes

Flexible and low-temperature-resistant double-network hydrogel with a bionic octopus-tentacle-like structure for integrated supercapacitor and nanogenerator sensor fabrication

Flexible and stretchable hydrogels are important components of flexible electronics; however, they are typically easily detached upon repeated high-strain stretching because of their smooth surfaces and cannot be used at subfreezing temperatures because of ice formation. To address these shortcomings, we prepared a low-temperature-resistant and flexible double-network hydrogel with a bionic octopus-tentacle-like structure composed of polyvinyl alcohol and sodium alginate. We also verified its suitability for developing high-performance, flexible, stretchable, and environmentally durable supercapacitors and nanogenerator sensors. The influence of melting temperature on the hydrogel's surface morphology decreased the interfacial resistance. The fabricated supercapacitor demonstrated exceptional performance, with 1326.5 mF cm-2 (areal capacitance) at 1 mA cm-2, a maximum energy and power densities of 172.3 μWh cm-2, and 708.6 mW cm-2, respectively, outperforming most integrated supercapacitors previously reported. The corresponding nanogenerator sensor demonstrated outstanding suitability for energy harvesting and low-temperature sensing, with potential applications in underwater information transmission using international Morse code. The results of this study paves the way for the fabrication of intelligent wearable electronics and solves the problems associated with the fabrication of flexible and low-temperature-resistant hydrogels.

Innovative approaches in bioadhesive design: A comprehensive review of crosslinking methods and mechanical performance

In biomedical applications, bioadhesives have become a game-changer, offering novel approaches to tissue engineering, surgical adhesion, and wound healing. This comprehensive review paper provides a thorough analysis of bioadhesives and their categorization according to application site and crosslinking process, bonding efficacy, and mechanical characteristics. The use of bioadhesives to stop bleeding and seal leaks is also covered in the review. The article delves into the various crosslinking techniques used in bioadhesives, including chemical, physical, and hybrid approaches. It emphasizes on how these mechanisms control the adhesive's elasticity, durability, and structural integrity. In addition, the review looks at the mechanical strength of bioadhesives, taking important characteristics like shear strength, toughness, elasticity, and tensile strength into account. It is highlighted how important bioadhesives are to the life sciences because they drive innovation and interdisciplinary cooperation, address present healthcare issues, and create new avenues for therapeutic development. The paper also explores some vital characteristics of bioadhesives that, when strategically combined with one another, improve their efficacy and usefulness in a variety of surgical and medical applications. The analysis concludes by examining nature-inspired adhesives, including those based on geckos, mussels, and tannic acid, and their unique bonding mechanisms and potential for use in advanced biomedical applications.

Advanced multifunctional coatings in ureteral stents: Interfacial design, properties, and applications

Ureteral stents play an essential role in the clinical practice of managing both benign and malignant urinary tract disorders. However, their use is accompanied by various complications, including tissue damage, urinary tract infection, biofilm formation, and encrustation. Although ureteral stents demonstrate remarkable efficacy in alleviating urinary tract obstruction, the multifaceted complications stemming from the demanding physiological environment of the urinary system continue to present a formidable challenge to clinical management. Therefore, the strategies to develop multifunctional stents are critical to address the complex microenvironment of long-term indwelling urinary tract. This review initially examines the challenges associated with the urinary tract interface environment and outlines strategies to overcome them. It then highlights the state-of-the-art advances in multifunctional urinary stents and discusses customized solutions that meet clinical practice depending on the duration of stent indwelling. Finally, we discuss the potential for designing smart-responsive multifunctional coating technologies, designed for precision therapy. This review provides insight into the development of advanced ureteral stents.

A Bio-Adaptive Janus-Adhesive Dressing with Dynamic Lubrication Overlayer for Prevention of Postoperative Infection and Adhesion

Wound postoperative infection and adhesion are prevalent clinical conditions resulting from surgical trauma. However, integrating intraoperative repair and postoperative management into a dressing suitable for wounds with unpredictable surface shapes and surroundings remains a formidable challenge. Here, we attempt to introduce a dynamic antifouling surface as wound protective covering and report an in situ formation of slippery-adhesive Janus gel (SAJG) by assembling hydrogel (N-hydrosuccinimide ester-activated powders) and elastomer (Silicon oil-infused polydimethylsiloxane). First powders can rapidly absorb interfacial water to gel and bond to tissue based on network entanglement, forming a tough adhesive hydrogel. Then precured organosilicon is applied to hydrogel and bonded together, forming a slippery elastomer. Due to the molecular polarity difference between hydrogel and elastomer, SAJG exhibits anisotropic surface behavior as evidenced by liquid repellency (hydrophilic vs. hydrophobic), and adhesion performance (bioadhesion vs. antiadhesion). Further, in vivo models are constructed and results demonstrated that the SAJG can effectively prevent bacterial infection to promote wound healing and avoid postoperative adhesion. Predictably, the morphologically adaptive SAJG with slippery and adhesive properties will have tremendous potential in addressing complex wound infections and postoperative complications.

A Microphase Separation-Driven Supramolecular Tissue Adhesive with Instantaneous Dry/Wet Adhesion, Alcohol-Triggered Debonding, and Antibacterial Hemostasis

Tissue adhesives are promising materials for expeditious hemorrhage control, while it remains a grand challenge to engineer a superior formulation with instantaneous adhesion, on-demand debonding, and the integration of multiple desirable properties such as antibacterial and hemostatic capabilities. Herein, a multifunctional supramolecular tissue adhesive based on guanidinium-modified polydimethylsiloxane (PDMS) is introduced, driven by a reversible microphase separation mechanism. By optimizing the content of guanidinium ions, precise control over cohesive strength, adhesion, and wettability is achieved, resulting in strong instantaneous adhesion under both dry and wet conditions. Notably, the supramolecular nature of the adhesive allows for convenient on-demand removal using medical-grade alcohol, offering a critical advantage for easy debonding. Additionally, the adhesive exhibits remarkable antimicrobial properties while maintaining excellent biocompatibility and hemocompatibility. Its underwater injectability supports minimally invasive surgical procedures. Furthermore, the adhesive's ability to incorporate solid particles enhances its versatility, particularly for the development of drug-embedded bioadhesives. This work addresses key challenges in tissue adhesive design via a microphase separation-driven working principle, thereby opening promising new avenues for the development of advanced bioadhesives with tailored properties and enhanced surgical and wound care outcomes.

Bioelectronics hydrogels for implantable cardiac and brain disease medical treatment application

Hydrogel-based bioelectronic systems offer significant benefits for point-of-care diagnosis, treatment of cardiac and cerebral disease, surgical procedures, and other medical applications, ushering in a new era of advancements in medical technology. Progress in hydrogel-based bioelectronics has advanced from basic instrument and sensing capabilities to sophisticated multimodal perceptions and feedback systems. Addressing challenges related to immune responses and inflammation regulation after implantation, physiological dynamic mechanism, biological toxicology as well as device size, power consumption, stability, and signal conversion is crucial for the practical implementation of hydrogel-based bioelectronics in medical implants. Therefore, further exploration of hydrogel-based bioelectronics is imperative, and a comprehensive review is necessary to steer the development of these technologies for use in implantable therapies for cardiac and brain/neural conditions. In this review, a concise overview is provided on the fundamental principles underlying ionic electronic and ionic bioelectronic mechanisms. Additionally, a comprehensive examination is conducted on various bioelectronic materials integrated within hydrogels for applications in implantable medical treatments. The analysis encompasses a detailed discussion on the representative structures and physical attributes of hydrogels. This includes an exploration of their intrinsic properties such as mechanical strength, dynamic capabilities, shape-memory features, stability, stretchability, and water retention characteristics. Moreover, the discussion extends to properties related to interactions with tissues or the environment, such as adhesiveness, responsiveness, and degradability. The intricate relationships between the structure and properties of hydrogels are thoroughly examined, along with an elucidation of how these properties influence their applications in implantable medical treatments. The review also delves into the processing techniques and characterization methods employed for hydrogels. Furthermore, recent breakthroughs in the applications of hydrogels are logically explored, covering aspects such as materials, structure, properties, functions, fabrication procedures, and hybridization with other materials. Finally, the review concludes by outlining the future prospects and challenges associated with hydrogels-based bioelectronics systems.

Mechanically Compatible Sealing of Hydrogel with Coherent Interface

Long-term operation of hydrogels relies on protective coatings to avoid water swelling or evaporation, but these protections often cause substantial decreases in overall softness and stretchability. Here, a mechanically compatible seal with a coherent interfacial design is developed to encapsulate hydrogels. This seal is made from polybutylene (PIB) and polypropylene-graft-maleic anhydride (PP-g-MAH) blended poly(styrene-isobutylene-styrene) (SIBS). The PIB oligomers soften the SIBS networks, while the MAH groups facilitate covalent bonding between the SIBS and hydrogel. The sealed hydrogel exhibits an elastic modulus of 24 kPa and an elongation at a break of >1000%, both comparable to those of the pristine hydrogel. The adhesion energy between the seal and hydrogel reached >140 J m-2 and can be further increased to >400 J m-2 by a thermal treatment. This tough interface, together with the intrinsically low water vapor transmission rate of SIBS, allows the sealed hydrogel to maintain its modulus and stretchability after 10 days of drying in air. The sealed hydrogel is chemically and mechanically stable under harsh conditions, including acidic/alkaline/salty solutions, high temperatures, and cyclic mechanical deformation. This strategy applies to various hydrogels with diverse compositions and structures, leading to orders of magnitude improvements in the longevity of hydrogel-based electronic devices.

Tunable Gas Permeation Behavior through Robust, Freestanding Self-Assembled Metal Nanoparticle Membranes

Membrane-based gas separation offers a promising alternative route to energy-intensive industrial gas separation processes. Conventional microporous membranes often exhibit low gas selectivities for gases with similar kinetic diameters, primarily due to large pore sizes and reliance on Knudsen selectivity. In this study, we present self-assembled gold nanoparticle (Au NP) membranes that enable molecular gas separation within the kinetic diameter range of small gases such as H2, CO2, and O2. By grafting silane molecules of varying sizes onto NP ligands, the gas selectivity of these membranes becomes tunable. This strategy achieves remarkably high gas selectivities of 192 and 35 for H2/CO2 and CO2/O2 gas pairs. Moreover, the Au NP membrane demonstrates a mixed gas selectivity of up to 30 for H2/CO2 even at room temperature, establishing its potential as a novel class of gas separation membranes with high and tunable selectivity.

Novel high-strength, recyclable, microbial-resistant, and freeze-thaw dual topological network hydrogel cooling media

The demand for multifunctional hydrogels, offering high mechanical strength, efficient cooling, and antimicrobial properties, is growing in food preservation. Here, a dual-network (DN) hydrogel PM@Cur, which includes curcumin, is fabricated through chemical crosslinking and hydrogen bonding interactions. The resulting hydrogels can withstand more than five freeze-thaw cycles at -80 °C, and resist brittleness after liquid nitrogen treatment. PM@Cur also exhibits surface hydrophobicity (contact angle >90°) for both water and organic solvents. These properties meet the mechanical, anti-fouling, and recyclable demands for hydrogel coolants. The antimicrobial assays in vitro confirmed that the inclusion of curcumin provided the PM@Cur with photodynamic antimicrobial capacity. Finally, the prepared PM@Cur hydrogel ice cubes have been confirmed to exhibit better anti-melting properties than traditional ice cubes, thus enabling the preservation of strawberries and shrimp. This study presents an innovative solution for producing advanced functional integrated hydrogels, offering a promising and safer option for food coolants.\.

Tough and Functional Hydrogel Coating by Electrostatic Spraying

Hydrogel coatings impart superior surface properties to materials, but their application on large and complicated substrates is hindered by two challenges: limited wetting conditions and intricate curing processes. To overcome the challenges, lyophilized adhesive hydrogel powders (LAHPs) are developed, which consist of poly(acrylic acid-co-3-(trimethoxysilyl)propyl methacrylate) crosslinked with chitosan. These powders are electrostatic sprayed onto substrates to address wetting issues and rehydrated to form bulk hydrogel coatings to circumvent curing challenges. This approach enables the application of hydrogel coatings with a smooth surface and adjustable thickness on various materials, irrespective of category, geometry, or size. The coatings exhibit remarkable mechanical properties (strength of 2.62 MPa, elastic modulus of 6.84 MPa, and stretchability exceeding 3 folds) and robust adhesion (adhesion energy ≈900 J m-2) through a three-step bonding process involving electrostatic attraction, hydrogen bonding, and covalent bonding. Notably, these coatings confer multiple functional attributes to the substrate, including lubricity, hydrophilicity, nucleation inhibition, and pH-responsive actuation. Moreover, incorporating LAHPs with functional agents or rehydrating with functional solutions opens possibilities for diverse functional hydrogel coatings, such as thermal responsiveness and NH3 indication. Leveraging the virtues of simplicity, flexibility, convenience, and broad applicability, this strategy presents an enticing pathway for the widespread applications of hydrogel coatings.

Design Strategy, On-Demand Control, and Biomedical Engineering Applications of Wet Adhesion

The adhesion of tissues to external devices is fundamental to numerous critical applications in biomedical engineering, including tissue and organ repair, bioelectronic interfaces, adhesive robotics, wearable electronics, biomedical sensing and actuation, as well as medical monitoring, treatment, and healthcare. A key challenge in this context is that tissues are typically situated in aqueous and dynamic environments, which poses a bottleneck to further advancements in these fields. Wet adhesion technology (WAT) presents an effective solution to this issue. In this review, we summarize the three major design strategies and control methods of wet adhesion, comprehensively and systematically introducing the latest applications and advancements of WAT in the field of biomedical engineering. First, single adhesion mechanism under the frameworks of the three design strategies is systematically introduced. Second, control methods for adhesion are comprehensively summarized, including spatiotemporal control, detachment control, and reversible adhesion control. Third, a systematic summary and discussion of the latest applications of WAT in biomedical engineering research and education were presented, with a particular focus on innovative applications such as tissue-electronic interface devices, ingestible devices, end-effector components, in vivo medical microrobots, and medical instruments and equipment. Finally, opportunities and challenges encountered in the design and development of wet adhesives with advanced adhesive performance and application prospects are discussed.

Endocytosis-Inspired Zwitterionic Gel Tape for High-Efficient and Sustainable Underoil Adhesion

Marine oil exploration is important yet greatly increases the risk of oil leakage, which will result in severe environment pollution and economic losses. It is an urgent need to develop effective underoil adhesives. However, realizing underoil adhesion is even harder than those underwater, due to the stubborn attachment of a highly viscous oil layer on target surface. Here, inspired by endocytosis, a tough gel tape composed of zwitterionic polymer network and zwitterionic surfactants is developed. The amphiphilic surfactants can form micelle to capture the oil droplets and transport them from the interface to gel via electrostatic attraction of polymer backbone, mimicking the endocytosis and achieving robust underoil adhesion. Benefiting from the oil-resistance of polymer backbone, the gel further realizes a combination of i) long-term adhesion with high durability, ii) repeated adhesion in oil, and iii) renewable adhesion efficiency after exhausted use. The tape exhibits an ultra-high adhesive toughness of 2446.86 J m-2 to stainless steel in silicone oil after 30 days' oil-exposure; such value of adhesive toughness surpasses many of those achieved in underwater adhesion and is greater than underoil adhesion performance of commercial tape. The strategy illustrated here will motivate the design of sustainable and efficient adhesives for wet environments.

Acoustic pipette and biofunctional elastomeric microparticle system for rapid picomolar-level biomolecule detection in whole blood

Most biosensing techniques require complex processing steps that generate prolonged workflows and introduce potential points of error. Here, we report an acoustic pipette to purify and label biomarkers in 70 minutes. A key aspect of this technology is the use of functional negative acoustic contrast particles (fNACPs), which display biorecognition motifs for the specific capture of biomarkers from whole blood. Because of their large size and compressibility, the fNACPs robustly trap along the pressure antinodes of a standing wave and separate from blood components in under 60 seconds with >99% efficiency. fNACPs are subsequently fluorescently labeled in the pipette and are analyzed by both a custom, portable fluorimeter and flow cytometer. We demonstrate the detection of anti-ovalbumin antibodies from blood at picomolar levels (35 to 60 pM) with integrated controls showing minimal nonspecific adsorption. Overall, this system offers a simple and versatile approach for the rapid, sensitive, and specific capture of biomolecules.

Hydrogel Coatings of Implants for Pathological Bone Repair

Hydrogels are well-suited for biomedical applications due to their numerous advantages, such as excellent bioactivity, versatile physical and chemical properties, and effective drug delivery capabilities. Recently, hydrogel coatings have developed to functionalize bone implants which are biologically inert and cannot withstand the complex bone tissue repair microenvironment. These coatings have shown promise in addressing unique and pressing medical needs. This review begins with the major functionalized performance and interfacial bonding strategy of hydrogel coatings, with a focus on the novel external field response properties of the hydrogel. Recent advances in the fabrication strategies of hydrogel coatings and their use in the treatment of pathologic bone regeneration are highlighted. Finally, challenges and emerging trends in the evolution and application of physiological environment-responsive and external electric field-responsive hydrogel coatings for bone implants are discussed.

Mechanical Regulation of Polymer Gels

The mechanical properties of polymer gels devote to emerging devices and machines in fields such as biomedical engineering, flexible bioelectronics, biomimetic actuators, and energy harvesters. Coupling network architectures and interactions has been explored to regulate supportive mechanical characteristics of polymer gels; however, systematic reviews correlating mechanics to interaction forces at the molecular and structural levels remain absent in the field. This review highlights the molecular engineering and structural engineering of polymer gel mechanics and a comprehensive mechanistic understanding of mechanical regulation. Molecular engineering alters molecular architecture and manipulates functional groups/moieties at the molecular level, introducing various interactions and permanent or reversible dynamic bonds as the dissipative energy. Molecular engineering usually uses monomers, cross-linkers, chains, and other additives. Structural engineering utilizes casting methods, solvent phase regulation, mechanochemistry, macromolecule chemical reactions, and biomanufacturing technology to construct and tailor the topological network structures, or heterogeneous modulus compositions. We envision that the perfect combination of molecular and structural engineering may provide a fresh view to extend exciting new perspectives of this burgeoning field. This review also summarizes recent representative applications of polymer gels with excellent mechanical properties. Conclusions and perspectives are also provided from five aspects of concise summary, mechanical mechanism, biofabrication methods, upgraded applications, and synergistic methodology.

Design of a double-layered material as a long-acting moisturizing hydrogel-elastomer and its application in the field protection of elephant ivories excavated from the Sanxingdui Ruins

The sudden change in the environment from a dark, low-oxygen, low-temperature, high-humidity underground stable environment to an environment with much-improved temperature and humidity, a high oxygen content, enhanced light exposure, and increased harmful organisms has greatly affected the stability of the ivory unearthed from the Sanxingdui site. Therefore, the implementation of an effective emergency protection strategy for ivory excavated at Sanxingdui is imperative and urgently needed. However, the current gauze technique used at many archaeological sites suffers from short timescales, poor transparency of the material, and susceptibility to reverse osmosis of the ivory. Therefore, in this study, a transparent poly(acrylamide-acrylic acid) (P(AM-AA)) hydrogel-poly(dimethylsiloxane) (PDMS) elastomer bilayer was designed for the effective protection of excavated ivory. In this system, a hydrophobic PDMS elastomer was constructed on the surface of the hydrogel by the introduction of a silane coupling agent to inhibit the loss of water from the hydrogel to the external environment, thus prolonging the preservation of ivory by the protective material. The covalent interface between the hydrogel and the elastomer allowed the double-layer composite to exhibit excellent interfacial bonding. In addition, the double-layer material demonstrated a high mechanical strength of 1.2 MPa and a water binding ratio of ∼31%, which allowed it to form strong hydrogen bonds with the silanol structure. When the hydrogel was placed in an air environment (temperature: 25 °C; relative humidity: 65% RH), the water-retention rate of the double-layer material was still more than 60% after 5 days, thus the double-layer material showed excellent performance. Meanwhile, the double-layer material had a transmittance of more than 90% and exhibited a high degree of transparency, which makes it possible to promptly observe the changes occurring on the surface of the ivory. The combination of the aforementioned properties makes the bilayer a promising material for moisturizing and protecting excavated ivory in situ. Based on these properties, we used the prepared P(AM-AA)/PDMS double-layer material directly for wrapping the K8 ivory with the highest water content at Sanxingdui. The weight retention rate of the ivory was around 70% after 50 days of placement (temperature: 25 °C; relative humidity: 60% RH), the macroscopic morphology did not change significantly and the mechanical properties of the wrapped ivory were basically unchanged, which indicated that the double-layer material has an excellent on-site protection effect on the ivory excavated from Sanxingdui. This work provides new ideas and methods for the temporary conservation of wet heritage.

Tough and elastic hydrogels based on robust hydrophobicity-assisted metal ion coordination for flexible wearable devices

Flexible wearable sensors that combine excellent flexibility, high elasticity, sensing capabilities, and outstanding biocompatibility are gaining increasing attention. In this study, we successfully develop a robust and elastic hydrogel-based flexible wearable sensor by modulating molecular structures combined with metal ion coordination. We leverage three N-acryloyl amino acid monomers, including N-acryloyl glycine (AG), N-acryloyl alanine (AA), and N-acryloyl valine (AV) with different hydrophobic groups adjacent to the carboxyl group, to copolymerize with acrylamide (AM) in the presence of Zr4+ for hydrogel preparation in one step (P(AM3-AG/AA/AV0.06)-Zr0.034+ hydrogels). Our investigation reveals that the P(AM3-AV0.06)-Zr0.034+ hydrogel with the most hydrophobic side group demonstrates superior mechanical properties (1.1 MPa tensile stress, 3566 kJ m-3 toughness and 1.3 kJ m-2 fracture energy) and resilience to multiple tensile (30% strain, 500 cycles) and compression cycling (50% strain, 500 cycles). Moreover, the P(AM3-AV0.06)-Zr0.034+ hydrogel exhibits good biocompatibility and high conductivity (1.1 S m-1) and responsivity (GF = 16.21), and is proved to be suitable as a flexible wearable sensor for comprehensive human activity monitoring.

Nature-Inspired Molecular-Crowding Enabling Wide-Humidity Range Applicable, Anti-Freezing, and Robust Zwitterionic Hydrogels for On-Skin Electronics

Hydrogels are currently in the limelight for applications in soft electronics but they suffer from the tendency to lose water or freeze when exposed to dry environments or low temperatures. Molecular crowding is a prevalent occurrence in living cells, in which molecular crowding agents modify the hydrogen bonding structure, causing a significant reduction in water activity. Here, a wide-humidity range applicable, anti-freezing, and robust hydrogel is developed through the incorporation of natural amino acid proline (Pro) and conductive MXene into polyvinyl alcohol (PVA) hydrogel networks. Theoretical calculations reveal that Pro can transform "free water" into "locked water" via the molecular-crowding effect, thereby suppressing water evaporation and ice forming. Accordingly, the prepared hydrogel exhibits high water retention capability, with 77% and 55% being preserved after exposure to 20 °C, 28% relative humidity (RH) and 35 °C, 90% RH for 12 h. Meanwhile, Pro lowers the freezing temperature of the hydrogel to 34 °C and enhances its stretchability and strength. Finally, the PVA/Pro/MXene hydrogels are assembled as multifunctional on-skin strain sensors and conductive electrodes to monitor human motions and detect tiny electrophysiological signals. Collectively, this work provides a molecular crowding strategy that will motivate researchers to develop more advanced hydrogels for versatile applications.

Bioelectronic Neural Interfaces: Improving Neuromodulation Through Organic Conductive Coatings

Integration of bioelectronic devices in clinical practice is expanding rapidly, focusing on conditions ranging from sensory to neurological and mental health disorders. While platinum (Pt) electrodes in neuromodulation devices such as cochlear implants and deep brain stimulators have shown promising results, challenges still affect their long-term performance. Key among these are electrode and device longevity in vivo, and formation of encapsulating fibrous tissue. To overcome these challenges, organic conductors with unique chemical and physical properties are being explored. They hold great promise as coatings for neural interfaces, offering more rapid regulatory pathways and clinical implementation than standalone bioelectronics. This study provides a comprehensive review of the potential benefits of organic coatings in neuromodulation electrodes and the challenges that limit their effective integration into existing devices. It discusses issues related to metallic electrode use and introduces physical, electrical, and biological properties of organic coatings applied in neuromodulation. Furthermore, previously reported challenges related to organic coating stability, durability, manufacturing, and biocompatibility are thoroughly reviewed and proposed coating adhesion mechanisms are summarized. Understanding organic coating properties, modifications, and current challenges of organic coatings in clinical and industrial settings is expected to provide valuable insights for their future development and integration into organic bioelectronics.

Rapid, Tough, and Trigger-Detachable Hydrogel Adhesion Enabled by Formation of Nanoparticles In Situ

Integrating hydrogel with other materials is always challenging due to the low mass content of hydrogels and the abundance of water at the interfaces. Adhesion through nanoparticles offers characteristics such as ease of use, reversibility, and universality, but still grapples with challenges like weak bonding. Here, a simple yet powerful strategy using the formation of nanoparticles in situ is reported, establishing strong interfacial adhesion between various hydrogels and substrates including elastomers, plastics, and biological tissue, even under wet conditions. The strong interfacial bonding can be formed in a short time (60 s), and gradually strengthened to 902 J m-2 adhesion energy within an hour. The interfacial layer's construction involves chain entanglement and other non-covalent interactions like coordination and hydrogen bonding. Unlike the permanent bonding seen in most synthetic adhesives, these nanoparticle adhesives can be efficiently triggered for removal by acidic solutions. The simplicity of the precursor diffusion and precipitation process in creating the interfacial layer ensures broad applicability to different substrates and nanoparticle adhesives without compromising robustness. The tough adhesion provided by nanoparticles allows the hydrogel-elastomer hybrid to function as a triboelectric nanogenerator (TENG), facilitating reliable electrical signal generation and output performance due to the robust interface.

Structuring and Shaping of Mechanically Robust and Functional Hydrogels toward Wearable and Implantable Applications

Hydrogels possess unique features such as softness, wetness, responsiveness, and biocompatibility, making them highly suitable for biointegrated applications that have close interactions with living organisms. However, conventional man-made hydrogels are usually soft and brittle, making them inferior to the mechanically robust biological hydrogels. To ensure reliable and durable operation of biointegrated wearable and implantable devices, mechanical matching and shape adaptivity of hydrogels to tissues and organs are essential. Recent advances in polymer science and processing technologies have enabled mechanical engineering and shaping of hydrogels for various biointegrated applications. In this review, polymer network structuring strategies at micro/nanoscales for toughening hydrogels are summarized, and representative mechanical functionalities that exist in biological materials but are not easily achieved in synthetic hydrogels are further discussed. Three categories of processing technologies, namely, 3D printing, spinning, and coating for fabrication of tough hydrogel constructs with complex shapes are reviewed, and the corresponding hydrogel toughening strategies are also highlighted. These developments enable adaptive fabrication of mechanically robust and functional hydrogel devices, and promote application of hydrogels in the fields of biomedical engineering, bioelectronics, and soft robotics.

Rubber-glass nanocomposites fabricated using mixed emulsions

Many composites consist of matrices of elastomers and nanoparticles of stiff materials. Such composites often have superior properties and are widely used. Embedding elastomers with nanoparticles commonly necessitates intense shear, using machines like extruders and roll millers, which cut polymer chains and degrade properties. Here, we prepare a rubber-glass nanocomposite by using two aqueous emulsions. Each emulsion is separately prepared with a single species of polymer chains. Each polymer chain is copolymerized with a small amount of silane coupling agent. Upon mixing the two emulsions, as water evaporates, the glassy particles retain the shape, and the rubbery particles change shape to form a continuous matrix. Subsequently, the silane coupling agent condensates, which cross-links the rubbery chains and interlinks the rubbery chains to the glassy particles. The cross-links and interlinks stabilize the nanostructure and lead to superior properties. The nanocomposite simultaneously achieves high modulus (~30 MPa), high toughness (~100 kJ m-2), and high fatigue threshold (~1,000 J m-2). The method of mixed emulsion is environmentally friendly and compatible with various open-air manufacturing processes, such as coat, cast, spray, print, and brush. Additionally, the silane coupling agent can interlink the nanocomposite to other materials. The method of mixed emulsion can be used to fabricate objects of complex shapes, fine features, and prescribed spatial variations of compositions.

Density Functional Theory Approach to Interpret Elastowetting of Hydrogels

Sessile hydrogel drops on rigid surfaces exhibit a wetting/contact morphology intermediate between liquid drops and glass spheres. Using density functional theory, we reveal the contact forces acting between a hydrogel and a rigid glass surface. We show that while transitioning from liquid-like to solid-like hydrogels, there exists a critical hydrogel elasticity that enables a switch from attractive-to-repulsive interaction with the underlying rigid glass surface. Our theoretical model is validated by experimental observations of sessile polyacrylamide hydrogels of varying elasticity on glass surfaces. Further, the proposed model successfully approaches Young's law in the pure liquid limit and work of adhesion in the glassy limit. Lastly, we show a modified contact angle relation, taking into account the hydrogel elasticity to explain the features of a distinct hydrogel foot.

Robust, Sprayable, and Multifunctional Hydrogel Coating through a Polycation Reinforced (PCR) Surface Bridging Strategy

The sprayable hydrogel coatings that can establish robust adhesion onto diverse materials and devices hold enormous potential; however, a significant challenge persists due to monomer hydration, which impedes even coverage during spraying and induces inadequate adhesion post-gelation. Herein, a polycation-reinforced (PCR) surface bridging strategy is presented to achieve tough and sprayable hydrogel coatings onto diverse materials. The polycations offer superior wettability and instant electrostatic interactions with plasma-treated substrates, facilitating an effective spraying application. This PCR-based hydrogel coatings demonstrate tough adhesion performance to inert PTFE and silicone, including remarkable shear strength (161 ± 49 kPa for PTFE), interfacial toughness (198 ± 27 J m-2 for PTFE), and notable tolerance to cyclic tension (10 000 cycles, 200% strain, silicone). Meanwhile, this method can be applied to various hydrogel formulations, offering diverse functionalities, including underwater adhesion, lubrication, and drug delivery. Furthermore, the PCR concept enables the conformal construction of durable hydrogel coatings onto sophisticated medical devices like cardiovascular stents. Given its simplicity and adaptability, this approach paves an avenue for incorporating hydrogels onto solid surfaces and potentially promotes untapped applications.

Hydrogen Bonds-Pinned Entanglement Blunting the Interfacial Crack of Hydrogel-Elastomer Hybrids

Anchoring a layer of amorphous hydrogel on an antagonistic elastomer holds potential applications in surface aqueous lubrication. However, the interfacial crack propagation usually occurs under continuous loads for amorphous hydrogel, leading to the failure of hydrogel interface. This work presents a universal strategy to passivate the interfacial cracks by designing a hydrogen bonds-pinned entanglement (Hb-En) structure of amorphous hydrogel on engineering elastomers. The unique Hb-En structure is created by pinning well-tailored entanglements via covalent-like hydrogen bonds, which can amplify the delocalization of interfacial stress concentration and elevate the necessary fracture energy barrier within hydrogel interface. Therefore, the interfacial crack propagation can be suppressed under single and cyclic loads, resulting in a high interfacial toughness over 1650 J m-2 and an excellent interfacial fatigue threshold of 423 J m-2. Such a strategy universally works on blunting the interfacial crack between hydrogel coating and various elastomer materials with arbitrary shapes. The superb fatigue-crack insensitivity at the interface allows for durable aqueous lubrication of hydrogel coating with low friction.

A Hydrogel Electrolyte toward a Flexible Zinc-Ion Battery and Multifunctional Health Monitoring Electronics

The compact design of an environmentally adaptive battery and effectors forms the foundation for wearable electronics capable of time-resolved, long-term signal monitoring. Herein, we present a one-body strategy that utilizes a hydrogel as the ionic conductive medium for both flexible aqueous zinc-ion batteries and wearable strain sensors. The poly(vinyl alcohol) hydrogel network incorporates nano-SiO2 and cellulose nanofibers (referred to as PSC) in an ethylene glycol/water mixed solvent, balancing the mechanical properties (tensile strength of 6 MPa) and ionic diffusivity at -20 °C (2 orders of magnitude higher than 2 M ZnCl2 electrolyte). Meanwhile, cathode lattice breathing during the solvated Zn2+ intercalation and dendritic Zn protrusion at the anode interface are mitigated. Besides the robust cyclability of the Zn∥PSC∥V2O5 prototype within a wide temperature range (from -20 to 80 °C), this microdevice seamlessly integrates a zinc-ion battery with a strain sensor, enabling precise monitoring of the muscle response during dynamic body movement. By employing transmission-mode operando XRD, the self-powered sensor accurately documents the real-time phasic evolution of the layered cathode and synchronized strain change induced by Zn deposition, which presents a feasible solution of health monitoring by the miniaturized electronics.

Recent progress in critical electrode and electrolyte materials for flexible zinc-ion batteries

With the increasing popularity of flexible and wearable electronic devices, the demand for power supplies that can be easily bent or worn is also rapidly growing. However, traditional lithium ion batteries are difficult to adapt to complex wearable devices because of their unsatisfactory flexibility and thickness as well as safety issues. Zinc-ion batteries have several advantages, including low redox potential, high theoretical capacity, high safety, and abundant reserves. These features make flexible zinc-ion batteries (FZIBs) an ideal wearable energy storage device candidate. The electrochemical performance and mechanical deformability of FZIBs were pivotally determined based on the properties of their electrode and electrolyte. Herein, we summarize some recent advances from 2015 to 2023 in the design and preparation of various electrode and electrolyte materials for FZIBs with controllable morphology and structure, excellent mechanical property, and enhanced electrochemical performance. Moreover, efforts to explore the potential practical applications of FZIBs have also been considered. Finally, we present and discuss current challenges and opportunities for the development of high-performance FZIBs.

Biomimetic Electronic Skin through Hierarchical Polymer Structural Design

Human skin comprises multiple hierarchical layers that perform various functions such as protection, sensing, and structural support. Developing electronic skin (E-skin) with similar properties has broad implications in health monitoring, prosthetics, and soft robotics. While previous efforts have predominantly concentrated on sensory capabilities, this study introduces a hierarchical polymer system that not only structurally resembles the epidermis-dermis bilayer structure of skin but also encompasses sensing functions. The system comprises a polymeric hydrogel, representing the "dermis", and a superimposed nanoporous polymer film, forming the "epidermis". Within the film, interconnected nanoparticles mimic the arrangement of interlocked corneocytes within the epidermis. The fabrication process employs a robust in situ interfacial precipitation polymerization of specific water-soluble monomers that become insoluble during polymerization. This process yields a hybrid layer establishing a durable interface between the film and hydrogel. Beyond the structural mimicry, this hierarchical structure offers functionalities resembling human skin, which includes (1) water loss protection of hydrogel by tailoring the hydrophobicity of the upper polymer film; (2) tactile sensing capability via self-powered triboelectric nanogenerators; (3) built-in gold nanowire-based resistive sensor toward temperature and pressure sensing. This hierarchical polymeric approach represents a potent strategy to replicate both the structure and functions of human skin in synthetic designs.

Durable hydrogel-based lubricated composite coating with remarkable underwater performances

HYPOTHESIS

Hydrogel coatings have received great attention in the field of such as medical devices, water treatment membranes, flexible electronics, and marine antifouling. However, when it comes to lubrication of hydrogel materials, though it has great potential applications in the field of industrial and medical drag reduction, some restrained properties are urgently needed to overcome for releasing the practical potential.

EXPERIMENTS

Durability of high lubrication was revealed from the sliding test during the long-term storage, as well as the long-distance sliding. Some variables which possibly affect the lubrication performance were examined to demonstrate that excellent lubricity of the coating would not be easily influenced by load, frequency, friction pair and temperature. The microstructure and mechanical characterization of the lubricative coating indicate that the resistance to harsh running conditions is premised on enough hydration extent and robustness. The formulae of Possion ratio and ball-on-disk contact stress which apply to soft matter were used for calculating contact stress values in tribology tests. Anti-swelling and bio-compatibility are also verified.

FINDINGS

This work found a route of achieving superior lubrication and coexisting with stability in lubrication, which can be used for drag reduction in medical devices and shipbuilding industry.

A Generic Strategy to Create Mechanically Interlocked Nanocomposite/Hydrogel Hybrid Electrodes for Epidermal Electronics

Stretchable electronics are crucial enablers for next-generation wearables intimately integrated into the human body. As the primary compliant conductors used in these devices, metallic nanostructure/elastomer composites often struggle to form conformal contact with the textured skin. Hybrid electrodes have been consequently developed based on conductive nanocomposite and soft hydrogels to establish seamless skin-device interfaces. However, chemical modifications are typically needed for reliable bonding, which can alter their original properties. To overcome this limitation, this study presents a facile fabrication approach for mechanically interlocked nanocomposite/hydrogel hybrid electrodes. In this physical process, soft microfoams are thermally laminated on silver nanowire nanocomposites as a porous interface, which forms an interpenetrating network with the hydrogel. The microfoam-enabled bonding strategy is generally compatible with various polymers. The resulting interlocked hybrids have a 28-fold improved interfacial toughness compared to directly stacked hybrids. These electrodes achieve firm attachment to the skin and low contact impedance using tissue-adhesive hydrogels. They have been successfully integrated into an epidermal sleeve to distinguish hand gestures by sensing muscle contractions. Interlocked nanocomposite/hydrogel hybrids reported here offer a promising platform to combine the benefits of both materials for epidermal devices and systems.

Superhydrophilic and Antifriction Thin Hydrogel Formed under Mild Conditions for Medical Bare Metal Guide Wires

Medical guide wires play a crucial role in the process of intravascular interventional therapy. However, it is essential for bare metal guide wires to possess both hydrophilic lubricity and coating durability, avoiding tissue damage caused by friction inside the blood vessel during the interventional procedure. Additionally, it is still a huge challenge for diverse metal materials to bind with polymer coatings easily. Herein, we present a hydrogel coating scheme and its preparation method for various wires under mild conditions for environmental protection purposes. The preparation process involves surface pretreatment, including low-temperature heating and silanization, followed by a two-step dip coating and ultraviolet polymerization. The whole process leads to the formation of an interpenetrating cross-linked hydrogel network from the substrate to the surface section. This study confirms the superhydrophilicity and lubricity of three metal wires with the designed coating, especially reducing the friction significantly by ≥ 95%. The thin coating (average thickness <6.2 μm) demonstrates strong adhesion with various substrates and exhibits resistance to 25 or even 125 cycles of friction, indicating excellent stability and preventing easy detachment. The finally prepared composite nickel-titanium (NiTi) guide wire with stainless steel (SS) and platinum-tungsten (Pt-W) coils (overall diameter of ∼0.36 mm) shows satisfactory performance with a friction of 0.183 N for 25 cycles, meeting the clinical requirements (average friction ≤0.2 N) for interventional operation. These findings highlight the potential of this study in advancing the development of medical devices, particularly in the field of intravascular interventional therapy.

Mechanochromic and ionic conductive cholesteric liquid crystal elastomers for biomechanical monitoring and human-machine interaction

Cholesteric liquid crystal elastomers (CLCEs) that combine rubbery elasticity with structural colour from self-assembled helical nanostructures are of paramount importance for diverse applications such as biomimetic skins, adaptive optics and soft robotics. Despite great advances, it is challenging to integrate electrical sensing and colour-changing characteristics in a single CLCE system. Here, we report the design and synthesis of an ionic conductive cholesteric liquid crystal elastomer (iCLCE) through in situ Michael addition and free-radical photopolymerization of CLCE precursors on silane-functionalized polymer ionic liquid networks, in which robust covalent chemical bonding was formed at the interface. Thanks to superior mechanochromism and ionic conductivity, the resulting iCLCEs exhibit dynamic colour-changing and electrical sensing functions in a wide range upon mechanical stretching, and can be used for biomechanical monitoring during joint bending. Importantly, a capacitive elastomeric sensor can be constructed through facilely stacking iCLCEs, where the optical and electrical dual-signal reporting performance allows intuitive visual localization of pressure intensity and distribution. Moreover, proof-of-concept application of the iCLCEs has been demonstrated with human-interactive systems. The research disclosed herein can provide new insights into the development of bioinspired somatosensory materials for emerging applications in diverse fields such as human-machine interaction, prostheses and intelligent robots.

A Tunable Soft Silicone Bioadhesive for Secure Anchoring of Diverse Medical Devices to Wet Biological Tissue

Silicone is utilized widely in medical devices for its compatibility with tissues and bodily fluids, making it a versatile material for implants and wearables. To effectively bond silicone devices to biological tissues, a reliable adhesive is required to create a long-lasting interface. BioAdheSil, a silicone-based bioadhesive designed to provide robust adhesion on both sides of the interface is introduced here, facilitating bonding between dissimilar substrates, namely silicone devices and tissues. The adhesive's design focuses on two key aspects: wet tissue adhesion capability and tissue-infiltration-based long-term integration. BioAdheSil is formulated by mixing soft silicone oligomers with siloxane coupling agents and absorbents for bonding the hydrophobic silicone device to hydrophilic tissues. Incorporation of biodegradable absorbents eliminates surface water and controls porosity, while silane crosslinkers provide interfacial strength. Over time, BioAdheSil transitions from nonpermeable to permeable through enzyme degradation, creating a porous structure that facilitates cell migration and tissue integration, potentially enabling long-lasting adhesion. Experimental results demonstrate that BioAdheSil outperforms commercial adhesives and elicits no adverse response in rats. BioAdheSil offers practical utility for adhering silicone devices to wet tissues, including long-term implants and transcutaneous devices. Here, its functionality is demonstrated through applications such as tracheal stents and left ventricular assist device lines.

In the View of Electrons Transfer and Energy Conversion: The Antimicrobial Activity and Cytotoxicity of Metal-Based Nanomaterials and Their Applications

The global pandemic and excessive use of antibiotics have raised concerns about environmental health, and efforts are being made to develop alternative bactericidal agents for disinfection. Metal-based nanomaterials and their derivatives have emerged as promising candidates for antibacterial agents due to their broad-spectrum antibacterial activity, environmental friendliness, and excellent biocompatibility. However, the reported antibacterial mechanisms of these materials are complex and lack a comprehensive understanding from a coherent perspective. To address this issue, a new perspective is proposed in this review to demonstrate the toxic mechanisms and antibacterial activities of metal-based nanomaterials in terms of energy conversion and electron transfer. First, the antimicrobial mechanisms of different metal-based nanomaterials are discussed, and advanced research progresses are summarized. Then, the biological intelligence applications of these materials, such as biomedical implants, stimuli-responsive electronic devices, and biological monitoring, are concluded based on trappable electrical signals from electron transfer. Finally, current improvement strategies, future challenges, and possible resolutions are outlined to provide new insights into understanding the antimicrobial behaviors of metal-based materials and offer valuable inspiration and instructional suggestions for building future intelligent environmental health.

Universal adhesion using mussel foot protein inspired hydrogel with dynamic interpenetration for topological entanglement

Achieving adhesion of hydrogels to universal materials with desirable strength remains a challenge despite emerging application of hydrogels. Herein we present a mussel foot protein (Mfp) inspired polyelectrolyte hydrogel of poly(ethylenimine)/poly(acrylic acid)-dopamine (PEI/PAADA) developed for universal tough adhesion. The highly-concentrated electrostatic and hydrogen-bonding interactions in PEI/PAADA hydrogel resulted in a tensile strength, strain at break, and toughness of 0.297 MPa, 2784 % and 5.440 MJ m-3, respectively. Moreover, the hydrogel can heal itself from physical damages, even can be recycled after totally dried via rehydration because of the high flexibility and reversibility of its dynamic bonds. Combining the strategies of topological stitching and direct bonding, Mfp-derived catechol and PEI/PAA backbone in PEI/PAADA corporately facilitated robust adhesion of universal materials with shear strength of up to 4.4 MPa and peeling strength of 870 J m-2, which is over 10 times greater than that of commercial fibrin gel. The adhesive also exhibited self-healing capability for at least 5 cycles, good stability in 1 M NaCl solution and characteristic debonding catalyzed by calcium. Moreover, in vitro cell behavior and in vivo wound healing assays suggested the potential of PEI/PAADA as wound dressing.

Mechanically Reinforced and Injectable Universal Adhesive Based on a PEI-PAA/Alg Dual-Network Hydrogel Designed by Topological Entanglement and Catechol Chemistry

Universal adhesion of hydrogels to diverse materials is essential to their extensive applications. Unfortunately, tough adhesion of wet surfaces remains an urgent challenge so far, requiring robust cohesion strength for effective stress dissipation. In this work, a dual-network hydrogel polyethylenimine-poly(acrylic acid)/alginate (PEI-PAA/Alg) with excellent mechanical strength is realized via PEI-PAA complex and calcium alginate coordination for universal adhesion by the synergistic effort of topological entanglement and catechol chemistry. The dual networks of PEI-PAA/Alg provide mechanically reinforced cohesion strength, which is sufficient for energy dissipation during adhesion with universal materials. After the integration of mussel-inspired dopamine into PAA or Alg, the adhesive demonstrates further improved adhesion performance with a solid adherend and capability to bond cancellous bones. Notably, the dopamine-modified adhesive exhibits better instant adhesion and reversibility with wet surfaces compared with commercial fibrin. Adhesion interfaces are investigated by SEM and micro-FTIR to verify the effectiveness of strategies of topological entanglement. Furthermore, the adhesive also possesses great injectability, stability, tissue adhesion, and biocompatibility. In vivo wound healing and histological analysis indicate that the hydrogel can promote wound closure, epidermis regeneration, and tissue refunctionalization, implying its potential application for bioadhesive and wound dressing.

Dendronization of chitosan to afford unprecedent thermoresponsiveness and tunable microconfinement

Convenient chemical modification of biomacromolecules to create novel biocompatible functional materials satisfies the current requirements of sustainable chemistry. Dendronization of chitosan with dendritic oligoethylene glycols (OEGs) paves a strategy for the preparation of functional dendronized chitosans (DCSs) with unprecedent thermoresponsive behavior, which inherit biological features from polysaccharides and the topological features from dendritic OEGs. In addition, densely packed dendritic OEG chains around the backbone provide efficient cooperative interactions and form an intriguing confined microenvironment based on the degradable biopolymers. In this perspective, we describe the principle for the preparation of the thermoresponsive DCSs, and focus on the molecular envelop effect from the hydrophobic microconfinement to the encapsulated guest molecules or moieties. Particular attention is put on their capacity to regulate behavior and the functions of the encapsulated guests through thermally-mediated dehydration and collapse of the densely packed dendritic OEGs. We believe that the methodology described here may provide prospects for the fabrication of functional materials from biomacromolecules, especially when used as environmentally friendly nanomaterials or in accurate diagnosis and therapy.

Strong Thermo-tolerant Silicone-Modified Waterborne Polyurethane/Polyimide Pressure-Sensitive Adhesive

A waterborne polyurethane pressure-sensitive adhesive (WPUPSA) has the advantages of low pollution and good viscoelasticity. However, its poor thermo-tolerance limits its application in the field of high temperatures. Hence, a novel silicone-modified strong thermo-tolerant waterborne polyurethane/polyimide pressure-sensitive adhesive is developed as a way to remedy this problem. The single-chain structure of waterborne polyurethane (WPU) is transformed into a network structure by introducing the three-position network structure to increase the cohesive energy and heat resistance of the WPUPSA. Meanwhile, the primary chain of waterborne polyurethane (WPU) is modified by the reaction between pyromellitic dianhydride (PMDA) and isophorone diisocyanate (IPDI) to include an imide ring and a benzene ring with more stable structures and heat resistance. Characterization results of the prepared WPUPSA show that the thermo-tolerance index of the WPUPSA increases by 15.2% and the room temperature 180° peel strength and shear resistance of the WPUPSA increase by 80.9 and 231.8%, respectively. Meanwhile, the temperature corresponding to the maximum thermal decomposition rate of the samples is improved. More importantly, at 80 and 100 °C, the 180° peel strength and shear resistance of the modified samples are stronger than those of the unmodified samples. In addition, the energy storage modulus of WPUPSAs is also greater than the loss and increases with the increase of the frequency. Viscoelasticity dominates in the samples. This will provide new insight for the development of WPUPSAs in the field of high-temperature resistance.

An implantable ionic therapeutic platform for photodynamic therapy with wireless capacitive power transfer

In this work, we describe the development of an implantable ionic device that can deliver a spatially targeted light source to tumor tissues in a controllable manner. The motivation behind our approach is to overcome certain limitations of conventional approaches where light is delivered from the outside of the body and only achieves low penetration depths. Also, to avoid the issues that come from the periodic need to replace the device's battery, we utilize a wireless power transfer system synchronized with light operation in an implantable structure. In our testing of this implanted, soft ionic, gel-based device that receives power wirelessly, we were able to clearly observe its capability to effectively deliver light in a harmonious and stable configuration to adjacent tissues. This approach reduces the mechanical inconsistencies seen in conventional systems that are induced by mismatches between the mechanical strength of conventional metallic components and that of biological tissues. The light delivering performance of our device was studied in depth under the various conditions set by adjusting the area of the gel receivers, the ion concentration and the ion types used in the gel components. The enhanced antitumor effects of our device were observed through in vitro cell tests, in comparison with treatments using the conventional approach of using direct light from outside the body. Full encapsulation using biocompatible elastomers enables our device to provide good functional stability, while implantation for about 3 weeks in the in vivo model showed the effective targeted photodynamic treatments made possible by our approach. Our advanced approach of designing the implantable platform based on ionic gel components allows us to iteratively irradiate a target with light whenever required, making the technology particularly suited to long-term treatment of residual tumors while facilitating further practical and clinical development.

Cholesteric Liquid Crystal Polymeric Coatings for Colorful Artificial Muscles and Motile Humidity Sensor Skin Integrated with Magnetic Composites

Structural colorful cholesterics show impressive susceptibility to external stimulation, leading to applications in electro/mechano-chromic devices. However, out-of-plane actuation of structural colorful actuators based on cholesterics and the integration with other stimulation remains underdeveloped. Herein, colorful actuators and motile humidity sensors are developed using humidity-responsive cholesteric liquid crystal networks (CLCNs) and magnetic composites. The developed colorful actuator can exhibit synergistic out-of-plane shape morphing and color change in response to humidity, with CLCNs as colorful artificial muscles. Through the integration with magnetic control, the motile sensor can be navigated to open and confined spaces with the aid of friction to detect local relative humidity. The integration of multi-stimulation actuation of cholesteric magnetic actuators will expand the research frontier of structural colorful actuators and motile sensors for confined spaces.

Silane coupling agent in biomedical materials

Medical devices are becoming more and more significant in our daily life. For implantable medical devices, good biocompatibility is required for further use in vivo. Thus, surface modification of medical devices is really important, which gives a wide application scene for a silane coupling agent. The silane coupling agent is able to form a durable bond between organic and inorganic materials. The dehydration process provides linking sites to achieve condensation of two hydroxyl groups. The forming covalent bond brings excellent mechanical properties among different surfaces. Indeed, the silane coupling agent is a popular component in surface modification. Metals, proteins, and hydrogels are using silane coupling agent to link parts commonly. The mild reaction environment also brings advantages for the spread of the silane coupling agent. In this review, we summarize two main methods of using the silane coupling agent. One is acting as a crosslinker mixed in the whole system, and the other is to provide a bridge between different surfaces. Moreover, we introduce their applications in biomedical devices.

Wetting-Enabled Three-Dimensional Interfacial Polymerization (WET-DIP) for Bioinspired Anti-Dehydration Hydrogels

Anti-dehydration hydrogels have attracted considerable attention due to their promising applications in stretchable sensors, flexible electronics, and soft robots. However, anti-dehydration hydrogels prepared by conventional strategies inevitably depend on additional chemicals or suffer from cumbersome preparation processes. Here, inspired by the succulent Fenestraria aurantiaca a one-step wetting-enabled three-dimensional interfacial polymerization (WET-DIP) strategy for constructing organogel-sealed anti-dehydration hydrogels is developed. By virtue of the preferential wetting on the hydrophobic-oleophilic substrate surfaces, the organogel precursor solution can spread on the three-dimensional (3D) surface and encapsulate the hydrogel precursor solution, forming anti-dehydration hydrogel with 3D shape after in situ interfacial polymerization. The WET-DIP strategy is simple and ingenious, and accessible to discretionary 3D-shaped anti-dehydration hydrogels with a controllable thickness of the organogel outer layer. Strain sensors based on this anti-dehydration hydrogel also exhibit long-term stability in signal monitoring. This WET-DIP strategy shows great potentialities for constructing hydrogel-based devices with long-term stability.

A supramolecular gel-elastomer system for soft iontronic adhesives

Electroadhesion provides a promising route to augment robotic functionalities with continuous, astrictive, and reversible adhesion force. However, the lack of suitable conductive/dielectric materials and processing capabilities have impeded the integration of electroadhesive modules into soft robots requiring both mechanical compliance and robustness. We present herein an iontronic adhesive based on a dynamically crosslinked gel-elastomer system, including an ionic organohydrogel as adhesive electrodes and a resilient polyurethane with high electrostatic energy density as dielectric layers. Through supramolecular design and synthesis, the dual-material system exhibits cohesive heterolayer bonding and autonomous self-healing from damages. Iontronic soft grippers that seamlessly integrate actuation, adhesive prehension, and exteroceptive sensation are devised via additive manufacturing. The grippers can capture soft and deformable items, bear high payload under reduced voltage input, and rapidly release foreign objects in contrast to electroadhesives. Our materials and iontronic mechanisms pave the way for future advancement in adhesive-enhanced multifunctional soft devices.

Encapsulating eutectogels for stretchable humidity-resistant strain sensors

Eutectogels are stretchable ionic conductors extensively developed in recent years, owing to their distinct advantages of low cost, non-volatility, non-toxicity, and outstanding biocompatibility. However, the susceptibility to humidity caused by the exchange of water molecules between the interiors of eutectogels and the external environment greatly restricts their practical applications. Here, a dip-coating strategy is proposed to fabricate a P(MEA-co-IBA) elastomer-coated P(AAC-co-AAM) eutectogel to achieve satisfactory humidity-resistant capability. The hydrophobic elastomer coating significantly suppresses water exchange without harming the stretchability (>500%) and conductivity of the eutectogel. Strong adhesion forms at the eutectogel-coating interface due to the formation of an interpenetrating layer. The superior electromechanical performances of encapsulated eutectogels enable stretchable ionotronic devices with stable electrical performance (>1 h) and remarkable water-droplet/moist resistances during static/dynamic loadings. A humidity-resistant encapsulated eutectogel-based wearable strain sensor is further demonstrated. The proposed humidity-resistant eutectogels are promising candidates for soft and wearable ionotronics for practical applications.

Modular microfluidics for life sciences

The advancement of microfluidics has enabled numerous discoveries and technologies in life sciences. However, due to the lack of industry standards and configurability, the design and fabrication of microfluidic devices require highly skilled technicians. The diversity of microfluidic devices discourages biologists and chemists from applying this technique in their laboratories. Modular microfluidics, which integrates the standardized microfluidic modules into a whole, complex platform, brings the capability of configurability to conventional microfluidics. The exciting features, including portability, on-site deployability, and high customization motivate us to review the state-of-the-art modular microfluidics and discuss future perspectives. In this review, we first introduce the working mechanisms of the basic microfluidic modules and evaluate their feasibility as modular microfluidic components. Next, we explain the connection approaches among these microfluidic modules, and summarize the advantages of modular microfluidics over integrated microfluidics in biological applications. Finally, we discuss the challenge and future perspectives of modular microfluidics.

Strong, Chemically Stable, and Enzymatically On-Demand Detachable Hydrogel Adhesion Using Protein Crosslink

Achieving strong adhesion between hydrogels and diverse materials is greatly significant for emerging technologies yet remains challenging. Existing methods using non-covalent bonds have limited pH and ion stability, while those using covalent bonds typically lack on-demand detachment capability, limiting their applications. In this study, a general strategy of covalent bond-based and detachable adhesion by incorporating amine-rich proteins in various hydrogels and inducing the interfacial crosslinking of the hydrogels using a protein-crosslinking agent is demonstrated. The protein crosslink offers topological adhesion and can reach a strong adhesion energy of ≈750 J m^-2 . The chemistry of the adhesion is characterized and that the inclusion of proteins inside the hydrogels does not alter the hydrogels' properties is shown. The adhesion remains intact after treating the adhered hydrogels with various pH solutions and ions, even at an elevated temperature. The detachment is triggered by treating proteinase solution at the bonding front, causing the digestion of proteins, thus breaking up the interfacial crosslink network. In addition, that this approach can be used to adhere hydrogels to diverse dry surfaces, including glass, elastomers and plastics, is shown. The stable chemistry of protein crosslinks opens the door for various applications in a wide range of chemical environments.

Recent advances in conductive hydrogels: classifications, properties, and applications

Hydrogel-based conductive materials for smart wearable devices have attracted increasing attention due to their excellent flexibility, versatility, and outstanding biocompatibility. This review presents the recent advances in multifunctional conductive hydrogels for electronic devices. First, conductive hydrogels with different components are discussed, including pure single network hydrogels based on conductive polymers, single network hydrogels with additional conductive additives (i.e., nanoparticles, nanowires, and nanosheets), double network hydrogels based on conductive polymers, and double network hydrogels with additional conductive additives. Second, conductive hydrogels with a variety of functionalities, including self-healing, super toughness, self-growing, adhesive, anti-swelling, antibacterial, structural color, hydrophobic, anti-freezing, shape memory and external stimulus responsiveness are introduced in detail. Third, the applications of hydrogels in flexible devices are illustrated (i.e., strain sensors, supercapacitors, touch panels, triboelectric nanogenerator, bioelectronic devices, and robot). Next, the current challenges facing hydrogels are summarized. Finally, an imaginative but reasonable outlook is given, which aims to drive further development in the future.

Strong Anchoring of Hydrogels through Superwetting-Assisted High-Density Interfacial Grafting

Strong adhesion of hydrogels on solids plays an important role in stable working for various practical applications. However, current hydrogel adhesion suffers from poor interfacial bonding with solid surfaces. Here, we propose a general superwetting-assisted interfacial polymerization (SAIP) strategy to robustly anchor hydrogels onto solids by forming high-density interfacial covalent bonds. The key of our strategy is to make the initiator fully contact solid surfaces via a superwetting way for enhancing the interfacial grafting efficiency. The designed anchored hydrogels show strong bulk failure with a high breaking strength of ≈1.37 MPa, different from weak interfacial failure that occurs in traditional strategies. The strong interfacial adhesion greatly enhances the stability of hydrogels against swelling destruction. This work opens up new inspirations for designing strongly anchored hydrogels from an interfacial chemistry perspective.

Surface modification and adhesive-free adhesion of polytetrafluoroethylene (PTFE) and silicone gel containing oleophilic SiO2 powder by plasma treatment

Polytetrafluoroethylene (PTFE) has high-frequency characteristics and low transmission loss, and is expected to be used as a substrate material of printed wiring board for high-frequency applications. Meanwhile, silicone gel has superior properties such as attaching/detaching, weather resistance, and human safety. If the PTFE and silicone gel can be strongly adhered to, they can be applied to internet of things (IoT) devices that can be attached and detached freely. However, adhesion between PTFE, which has poor adhesion, and silicone gel, which has low mechanical strength, is difficult and has not been reported. In this study, PTFE was modified with heat-assisted plasma treatment, and silicone gel was treated with oleophilic SiO2 powder to improve elastic modulus and modified with plasma jet treatment, and then bonded without adhesive. The adhesion strength of PTFE/silicone gel assembly was 1.13 N mm-1 when treated moderately, but only 0.01 N mm-1 when untreated and treated excessively. To investigate the factors causing the difference in the adhesion strength, the surface of silicone gel was evaluated by water contact angle measurement, Fourier transform infrared spectroscopy, and confocal laser scanning microscopy. When treated moderately, hydrophilic functional groups and cross-linking were most frequently increased. Furthermore, when treated excessively, surface degradation was observed, which was expected to lower the adhesion strength. The adhesive-free bonding between PTFE and silicone gel can open a new path for developing IoT devices that can be freely attached and detached.