Amorphization activated ruthenium-tellurium nanorods for efficient water splitting

Abundant Amorphous/Crystalline Interfaces of C/A-NixP/NiOH Heterojunction Catalyst for Efficient Urea Oxidation Reaction

Replacing the kinetically slow oxygen evolution reaction (OER) with urea electro-oxidation significantly reduces the energy requirement for electrolysis of water. However, designing and optimizing efficient electrocatalysts for the industrial application of urea oxidation coupled to hydrogen production remains a challenge. Herein, we construct a C/A-NixP/NiOH heterojunction catalyst with actually abundant amorphous/crystalline interfaces for the urea oxidation reaction (UOR) by an interfacial-sequential treatment method of electrodeposition and low-temperature gas-phase phosphatization on carbon cloth (CC). Remarkably, in UOR, the C/A-NixP/NiOH catalyst required only 1.332 V to reach a current density of 10 mA cm-2 with negligible potential decay over 12 h. The excellent performance is attributed to the synergistic interaction between the inner amorphous NiOH layer and the outer crystalline NixP layer, as well as the abundant amorphous/crystalline interface, an interfacial structure that can expose more active sites as well as enhance the intrinsic activity, thus improving the reaction kinetics and stability of UOR. This work paves the way for the development of low-cost and high-efficiency catalysts for urea oxidation.

Electron donation from carbon support enhances the activity and stability of ultrasmall ruthenium dioxide nanoparticles in acidic oxygen evolution reaction

Developing non-iridium (Ir)-based electrocatalysts with good stability and activity for acid oxygen evolution reaction (OER) is of great importance for electrocatalytic water splitting. Ruthenium dioxide (RuO2), which has lower price and higher OER activity, has been recognized as an attractive alternative to Ir-based electrocatalyst for acidic OER. However, the stability of most Ru-based electrocatalysts faces a great challenge in acidic condition. Here, a highly stable and active RuO2-based catalyst, tiny RuO2 nanoparticles inlaid onto carbon support (RuO2/C), is successfully prepared for acidic OER. Such a structure can efficiently inhibit the over-growth of RuO2 nanoparticles and prevent the agglomeration of RuO2 nanoparticles. Moreover, it is found that carbon support donate electron to RuO2 nanoparticles, which enhances the OER activity and stability of RuO2 during acidic OER. The RuO2/C exhibits an impressive OER performance with a low overpotential (197 mV at 10 mA cm-2) and low degradation rate (0.035 mV h-1) over a 450-h stability test in 0.5 M H2SO4, which are much better than the commercial Ir/C, RuO2 and the reported Ru-based electrocatalysts. This work provides an efficient strategy to simultaneously improve both stability and activity of Ru-based catalysts for acidic water oxidation.

Atomically Dispersed High-Valent d0-Metal Breaks the Activity-Stability Trade-Off in Proton Exchange Membrane Water Electrolysis

Green hydrogen production via proton exchange membrane water electrolysis (PEMWE) faces economic feasibility challenges, primarily due to its reliance on noble metal catalysts. While cost-effective Ru-based catalysts show promise as alternatives to expensive Ir-based catalysts for an anodic oxygen evolution reaction, their long-term performance is compromised by overoxidation at high current densities. In addressing this challenge, we present a cooperative dual-site strategy for atomic-scale incorporation of high-valent d0-metal cations into RuO2. This synthesis results in uniformly distributed Ru-O-d0metal bonds, effectively reconciling the activity and stability trade-off. Leveraging these effects, our optimized Ta1/RuO2 catalyst demonstrates exceptional performance, with a low overpotential of 164 ± 2 mV and stable operation for 1000 h at 100 mA cm-2. In practical PEMWE systems, Ta1/RuO2 achieves 1.58 V at 2 A cm-2, surpassing the 2026 Department of Energy target, and maintains remarkable stability over 650 h at 500 mA cm-2. This breakthrough offers a highly active and durable PEMWE system suitable for industrial-scale applications.

CNT-Supported RuNi Composites Enable High Round-Trip Efficiency in Regenerative Fuel Cells

Regenerative fuel cells hold significant potential for efficient, large-scale energy storage by reversibly converting electrical energy into hydrogen and vice versa, making them essential for leveraging intermittent renewable energy sources. However, their practical implementation is hindered by the unsatisfactory efficiency. Addressing this challenge requires the development of cost-effective electrocatalysts. In this study, a carbon nanotube (CNT)-supported RuNi composite with low Ru loading is developed as an efficient and stable catalyst for alkaline hydrogen and oxygen electrocatalysis, including hydrogen evolution, oxygen evolution, hydrogen oxidation, and oxygen reduction reaction. Furthermore, a regenerative fuel cell using this catalyst composite is assembled and evaluated under practical relevant conditions. As anticipated, the system exhibits outstanding performance in both the electrolyzer and fuel cell modes. Specifically, it achieves a low cell voltage of 1.64 V to achieve a current density of 1 A cm- 2 for the electrolyzer mode and delivers a high output voltage of 0.52 V at the same current density in fuel cell mode, resulting in a round-trip efficiency (RTE) of 31.6% without further optimization. The multifunctionality, high activity, and impressive RTE resulted by using the RuNi catalyst composites underscore its potential as a single catalyst for regenerative fuel cells.

Unraveling Side Reactions in Paired CO2 Electrolysis at Operando Conditions: A Case Study of Ethylene Glycol Oxidation

Replacing the oxygen evolution reaction (OER) in CO2 electrolysis with an energetically and economically favorable alternative is very promising. Yet, understanding paired organic oxidation in the environment for CO2 reduction is particularly challenging, as monitoring multiple side reactions is problematic. Herein, we examined the oxidation of ethylene glycol (EG), one of the simplest polyols, as a model reaction on a series of nickel oxyhydroxide model catalysts (β-NiMxOOH, M = Ni, Co, Fe, and Cu). Using in situ techniques, including surface-enhanced infrared absorption spectroscopy (SEIRAS) and differential electrochemical mass spectrometry (DEMS), together with various ex situ approaches, we obtained the potential-resolved and quantitative information on various side reactions comprising the OER, overoxidation to CO/CO2, catalyst dissolution, and CO2 evolution from electrolyte decarbonation. Many factors including impurity cations, pH, and potential can substantially influence the product distribution and side reactions. Such influences are nearly identical for both the electrocatalytic and chemical-electrochemical oxidation pathways. The optimized system can achieve stable and high Faradaic efficiencies of formate (∼100%), glycolaldehyde (∼86%), and glycolate (∼66%), respectively. Importantly, paired electrolysis can easily suffer from higher energy consumption than the conventional counterpart, provided side reactions are unregulated. Yet the modulated one consumed 21.1% less energy even when product separation was considered. This work reveals the unique side reactions in paired CO2 electrolysis, opening up opportunities for designing efficient systems for real-life applications.

Proton Exchange Membrane Water Splitting: Advances in Electrode Structure and Mass-Charge Transport Optimization

Proton exchange membrane water electrolysis (PEMWE) represents a promising technology for renewable hydrogen production. However, the large-scale commercialization of PEMWE faces challenges due to the need for acid oxygen evolution reaction (OER) catalysts with long-term stability and corrosion-resistant membrane electrode assemblies (MEA). This review thoroughly examines the deactivation mechanisms of acidic OER and crucial factors affecting assembly instability in complex reaction environments, including catalyst degradation, dynamic behavior at the MEA triple-phase boundary, and equipment failures. Targeted solutions are proposed, including catalyst improvements, optimized MEA designs, and operational strategies. Finally, the review highlights perspectives on strict activity/stability evaluation standards, in situ/operando characteristics, and practical electrolyzer optimization. These insights emphasize the interrelationship between catalysts, MEAs, activity, and stability, offering new guidance for accelerating the commercialization of PEMWE catalysts and systems.

"Integrated Stacked" Design "Nanobullet" for High Photothermal Conversion in Dual-Mode Lateral Flow Immunoassay

Salmonella enterica serovar typhimurium (S. typhimurium), a prevalent foodborne bacterium, necessitates creating sensitive and rapid detection methods for food safety, with lateral flow immunoassays (LFIAs) using nanomaterials as signal tracers being particularly effective. Enhancements in performance and sensitivity are not restricted to the material alone, we propose an "integrated stacked" concept, which combines amorphous active sites, hollow morphology for enhanced reflection, and symmetric structure for strong absorption resonance. This approach leads to significant photothermal enhancement (η = 60.66%) and is supported by finite element analysis (|E|max2 = 3100). A hollow "nanobullet" (RuTe2) was created, featuring a vivid colorimetric signal enhancing the detection range, a large specific surface area (≈6:1) for improved antibody binding, and excellent photothermal properties facilitating dual-mode transduction. After 5 min of binding, the detection limits of RuTe2-LFIA for S. typhimurium after 12 min were 2398.83 cfu mL-1 (colorimetric) and 977.23 cfu mL-1 (photothermal), which were 36.14 and 88.72 times lower than the values of AuNPs-LFIA (86696.19 cfu mL-1). The superior performance of RuTe2-LFIA suggests potential advancements in photothermal materials for point-of-care testing.

Blocking Effect Retards Electron Release from Asymmetric Active Units for Selective Seawater Oxidation

During seawater electrolysis, chloride ion (Cl-) adsorption at the anode leads to an inevitable competitive chloride oxidation reaction (ClOR) with the oxygen evolution reaction (OER), compromising the long-term stability of the electrolysis process. Furthermore, Ni-based OER electrocatalysts are challenged by activity degradation due to the overoxidation of Ni3+. In response, we present a design of oxygen-vacancy-regulated asymmetric Nb-O-Ni bonds aimed at selective seawater oxidation. The experimental and in situ characterization results indicate that the blocking effect of oxygen vacancies effectively alleviates the electron release of Ni3+ and the electron enrichment of Nb5+ on asymmetric Nb-O-Ni bonds, achieving a stable and selective OER in alkaline seawater. Density functional theory (DFT) calculations reveal that oxygen vacancies in Nb-O-Ni bonds optimize the adsorption strength of reaction intermediates and break up the scaling relationship between *OH and *OOH intermediates. The constructed anion exchange membrane electrolysis cell achieves a cost efficiency of $1.07 per GGE (gasoline gallon equivalent) for H2 production at a current density of 1000 mA cm-2, maintaining operational stability for 100 h at 500 mA cm-2.

Amorphous and outstandingly stable Ni(OH)2·0.75H2O@Ni(OH)2/FeOOH heterojunction nanosheets for efficient oxygen evolution performance

Amorphous and multilevel two-dimensional Ni(OH)2·0.75H2O@Ni(OH)2/FeOOH heterojunction nanosheets with efficient OER catalytic activity (only 270 mV overpotential at 100 mA cm-2 and very low Tafel slope of 44 mV dec-1) and outstanding stability (more than 100 h at 100 mA cm-2) were synthesized, the electrocatalytic properties of which could be adjusted through regulating the Ni electronic structure by doping Fe element.

Modulation of Co spin state at Co3O4 crystalline-amorphous interfaces for CO oxidation and N2O decomposition

Modulation of electronic spin states in cobalt-based catalysts is an effective strategy for molecule activations. Crystalline-amorphous interfaces often exhibit unique catalytic properties due to disruptions of long-range order and alterations in electronic structure. However, the mechanisms of molecule activation and spin states at interfaces remain elusive. Herein, we present a Co3O4 spinel-based catalyst featuring crystalline-amorphous interfaces. Characterization analyses confirm that tetrahedral Co2+ is selectively etched from bulk spinel, forming amorphous CoO islands on the surface. The resultant symmetry breaking in the coordination field induces a reconstruction of the Co3+ 3 d orbitals, leading to high-spin states. In CO oxidation, the interface serves as novel active sites with a lower energy barrier, facilitated by lattice oxygen activation. In N2O decomposition, the interface promotes reassociation of dissociated oxygen through quantum spin exchange interactions. This work provides a straightforward approach to modulating the spin state of interfaces and elucidates their role in molecule activations.

Phase Control in Monometallic and Alloy Nanomaterials

Metal nanomaterials with unconventional phases have been recently developed with a variety of methods and exhibit novel and attractive properties such as high activities for various catalytic reactions and magnetic properties. In this review, we discuss the progress and the trends in strategies for synthesis, crystal structure, and properties of phase-controlled metal nanomaterials in terms of elements and the combination of alloys. We begin with a brief introduction of the anomalous phase behavior derived from the nanosize effect and general crystal structures observed in metal nanomaterials. Then, phase control in monometallic nanomaterials with respect to each element and alloy nanomaterials classified into three types based on their crystal structures is discussed. In the end, all the content introduced in this review is summarized, and challenges for advanced phase control are discussed.

Mo Migration-Induced Crystalline to Amorphous Conversion and Formation of RuMo/NiMoO4 Heterogeneous Nanoarray for Hydrazine-Assisted Water Splitting at Large Current Density

Manipulating the atomic structure of the catalyst and tailoring the dissociative water-hydrogen bonding network at the catalyst-electrolyte interface is essential for propelling alkaline hydrogen evolution reaction (HER) and hydrazine oxidation reaction (HzOR), but remains a great challenge. Herein, we constructed an advanced a-RuMo/NiMoO4/NF heterogeneous electrocatalyst with amorphous RuMo alloy nanoclusters anchored to amorphous NiMoO4 skeletons on Ni foam by a heteroatom implantation strategy. Theoretical calculations and in situ Raman tests show that the amorphous and alloying structure of a-RuMo/NiMoO4/NF not only induces the directional evolution of interfacial H2O, but also lowers the d-band center (from -0.43 to -2.22 eV) of a-RuMo/NiMoO4/NF, the Gibbs free energy of hydrogen adsorption (ΔGH*, from -1.29 to -0.06 eV), and the energy barrier of HzOR (ΔGN2(g)=1.50 eV to ΔGN2*=0.47 eV). Profiting from these favorable factors, the a-RuMo/NiMoO4/NF exhibits excellent electrocatalytic performances, especially at large current densities, with an overpotential of 13 and 129 mV to reach 10 and 1000 mA cm-2 for HER. While for HzOR, it needs only -91 and 276 mV to deliver 10 and 500 mA cm-2, respectively. Further, the constructed a-RuMo/NiMoO4/NF||a-RuMo/NiMoO4/NF electrolyzer demands only 7 and 420 mV to afford 10 and 500 mA cm-2.

Activity-Stability Relationships in Oxygen Evolution Reaction

The oxygen evolution reaction (OER) is a critical process in various sustainable energy technologies. Despite substantial progress in catalyst development, the practical application of OER catalysts remains hindered by the ongoing challenge of balancing high catalytic activity with long-term stability. We explore the inverse trends often observed between activity and stability, drawing on key insights from both experimental and theoretical studies. Special focus is placed on the performance of different electrodes and their interaction with acidic and alkaline media across a range of electrochemical conditions. This Perspective integrates recent advancements to present a thorough framework for understanding the mechanisms underlying the activity-stability relationship, offering strategies for the rational design of next-generation OER catalysts that successfully meet the dual demands of activity and durability.

Activating lattice oxygen in local amorphous S-modified NiFe-LDH ultrathin nanosheets toward superior alkaline/natural seawater oxygen evolution

The admire activity, selective and corrosion resistance electrocatalysts for oxygen evolution reaction (OER) are the bottleneck restricting seawater electrolysis owing to the side reactions of chloride ions (Cl-). Herein, we developed a local amorphous S-modified NiFe-LDH ultrathin nanosheets with large spacing on NiFe foam (la-S-NiFe-LDH/NFF) in-situ via the fast H2O2 assisted etching-anion regulation, resulting in a superior OER catalytic activity for seawater electrolysis. Benefitting from the local amorphous architecture induced by S, enhanced the metal-oxygen covalency, triggered lattice oxygen activity, and reduced the desorption energy of O2, the la-S-NiFe-LDH/NFF accelerated the OER progress via the lattice-oxygen-mediated (LOM) mechanism. Additionally, the preferential adsorbed OH- and reconstructed SO42- cooperated to prevent the proximity and erosion of Cl- and enhanced the corrosion resistance for seawater electrolysis. The assembled electrolyzer of Pt/C || la-S-NiFe-LDH/NFF possessed an industrial level of 500 mA cm-2 at 1.83 V potential for seawater electrolysis, and sustained response for 100 h.

Deep reconstruction of crystalline-amorphous heterojunction electrocatalysts for efficient and stable water and methanol electrolysis

During electrocatalytic water splitting, surface reconstruction often occurs to generate truly active species for catalytic reactions, but the stability and mass activity of the catalysts is a huge challenge. A method that combines cation doping with morphology control strategies and constructs an amorphous-crystalline heterostructure is proposed to achieve deep reconstruction of the catalyst during the electrochemical activation process, thereby significantly improving catalytic activity and stability. Amorphous iron borate (FeBO) is deposited on cobalt-doped nickel sulfide (Co-Ni3S2) crystals to form ultrathin nanosheet heterostructures (FeBO/Co-Ni3S2) as bifunctional electrocatalysts for the OER and methanol oxidation reaction (MOR). During the OER process, FeBO/Co-Ni3S2 is deeply reconstructed to form a NiFeOOH/Co-Ni3S2 composite structure with ultrathin nanosheets with abundant amorphous-crystalline interfaces to ensure structural stability. Furthermore, Co-Ni3S2 electrocatalysts were synthesized via nickel foam (NF) self-derivation, which resulted in strong adhesion between the catalyst and substrate and formed a hierarchical structure consisting of interconnected nanosheets with excellent mass transfer and abundant active sites to increase the activity and stability of the electrocatalyst. The dual-electrode electrolyzer requires cell voltages of 1.58 and 1.44 V to achieve water and methanol overall electrolysis at a current density of 10 mA cm-2 and keep working over 100 and 25 h, respectively. This strategy provides a new way to promote reconstruction to construct excellent bifunctional electrocatalysts.

In situ aniline polymerization during NH4V4O10 lattice formation achieves a high-performance hybrid cathode for aqueous zinc-ion batteries

Using NH4VO3 as both the precursor and oxidizing agent, polyaniline (PANI) is in situ synthesized within NH4V4O10 (NVO) crystal interlayers via a one-step hydrothermal method. The expanded lattice spacing, abundant oxygen vacancies and reduced electrostatic attraction endow the NVO/PANI cathode with an enhanced capacity of 350 mA h g-1 at 0.1 A g-1, as well as 87% capacity retention after 500 cycles at 1 A g-1.

Atomically Dispersed Mn-Doped Ru@RuO2 Core/Shell Nanostructure with High Acidic Water Oxidation Performance Arising from Multiple Synergies

The high overpotential and unsatisfactory stability of RuO2-based catalysts seriously hinder their application in acidic oxygen evolution reaction (OER). Herein, a Ru@RuO2 core/shell catalyst doped with atomically dispersed Mn species, denoted as Ru@Mn-RuO2, is reported, which is prepared by a facile one-pot method. Detailed structural characterizations confirm that Mn is homogeneously and atomically distributed in RuO2 shell, which causes lattice contraction of RuO2. The as-prepared Ru@Mn-RuO2 exhibits a very low overpotential of 190 mV at the current density of 10 mA cm-2 and an excellent stability of 360 h, far surpassing the control samples Ru@RuO2 without atomically dispersed Mn dopants and home-made RuO2 nanoparticles without metallic Ru core. With the further assistance of density functional theory calculations, the enhanced OER activity of Ru@Mn-RuO2 is attributed to multiple synergistic effects, including the MnOx-Ru (oxide shell) synergy, MnOx-Ru (metal core) synergy, and the Ru (core)-RuO2 (shell) synergy. Besides, the atomically dispersed Mn doping can increase the formation energy of soluble Ru cations, thus leading to the excellent stability of the Ru@Mn-RuO2 catalyst. This work shines light on the design of electrocatalysts with multiple synergistic effects towards efficient acid water splitting.

Boosted direct electrochemical reduction of As(III) from arsenic wastewater via Cu(II)-assisted codeposition on a CuIn alloy electrode

Arsenic contamination is a severe environmental problem. A promising strategy for addressing this issue is the direct conversion of highly toxic As(III) to less toxic elemental arsenic (As(0)) using electrochemical reduction technology. In this study, a novel CuIn alloy nanoparticles-modified copper foam (CuIn NPs/CF) was prepared as an efficient cathode for the electrocatalytic reduction of highly mobile As(III) to solid As(0). Density functional theory (DFT) results revealed that the Cu-In bimetallic system exhibited weaker H atom bonding, and the Cu-ln surface was more favorable for the adsorption of *AsO₃ species than the Cu surface. Compared to the pristine CF electrode, CuIn NPs/CF was demonstrated to effectively suppressed the hydrogen evolution reaction with an enlarged hydrogen evolution potential of 1.45 V, and displayed a superior As(0) recovery yield. The conversion of As(III) to As(0) was further enhanced by adding Cu²⁺ to the electrolyte, facilitating a Cu-As co-deposition process. Notably, the CuIn NPs/CF electrode achieved an As(0) recovery yield of 5.38 mg cm⁻² after eight successive recycling tests. This work not only presents a green and sustainable strategy for As(III) removal, but also provides valuable insights into the rational design of Cu-based alloy cathodes for electrocatalytic reduction.

Greenly Synthesized Conducting Polymer Nanotunnels with Metal-Hydroxide Nanobundles in Single Dais for Unmitigated Water Oxidation

Electrochemical water splitting required efficient electrocatalysts to produce clean hydrogen fuel. Here, we adopted greenway coprecipitation (GC) method to synthesize conducting polymer (CP) nanotunnel network affixed with luminal-abluminal CoNi hydroxides (GC-CoNiCP), namely, GC-Co1Ni2CP, GC-Co1.5Ni1.5CP, and GC-Co2Ni1CP. The active catalyst, GC-Co2Ni1CP/GC, has low oxygen evolution reaction (OER) overpotential (307 mV) and a smaller Tafel slope (47 mV dec-1) than IrO2 (125 mV dec-1). The electrochemical active surface area (EASA) normalized linear sweep voltammetry (LSV) curve exhibited outstanding intrinsic activity of GC-Co2Ni1CP, which required 285 mV to attain 10 mA cm-2. At 1.54 V, the estimated turnover frequency (TOF) of GC-Co2Ni1CP/GC (0.017337 s-1) was found to be 3-fold higher than that of IrO2 (0.0014 s-1). Furthermore, the GC-Co2Ni1CP/NF consumed a very low overpotential (281 mV) with a small Tafel slope of 121 mV dec-1. The ultrastability of GC-Co2Ni1CP for industrial application was confirmed by durability at 10 and 100 mA cm-2 for the OER (GC/NF-8 h, 2.0%/100 h, 2.2%) and overall water splitting (100 h, 3.8%), which implies that GC-Co2Ni1CP had adequate kinetics to address the elevated rates of water oxidation. The effect of pH and addition of tetramethylammonium cation (TMA+) reveal that GC-Co2Ni1CP follows the lattice oxygen mechanism (LOM). The solar-powered water electrolysis at 1.55 V supports the efficacy of GC-Co2Ni1CP in the solar-to-hydrogen conversion. The environmental impact studies and solar-driven water electrolysis proved that GC-CoNiCP has excellent greenness and efficiency, respectively.

Manipulating the d- and p-Band centers of amorphous alloys by variable composition for robust oxygen evolution reaction

Amorphous electrocatalysts display several unique advantages in electricity-driven water splitting compared to their crystalline analogs, but understanding their structure-activity relationships remains a major challenge. Herein, we show that the d- and p-electronic states of amorphous Ni-Fe-B can be subtly manipulated by varying the Ni and Fe contents. The optimal Ni-Fe-B alloy exhibits a high performance in the oxygen evolution reaction (OER), as supported by its impressive stability (no clear degradation after 100 h) and considerably lower overpotential compared to those of its crystalline analogs. Based on theoretical calculations, different Ni and Fe contents can cause significant shifts in the d-band levels of Ni and Fe and the p-band level of B, thus altering the OER activity. Additionally, the energy difference between the d- and p-band centers (ΔEad-p) may be an effective index for use in reflecting the structure-activity relationship of an amorphous Ni-Fe-B alloy in the OER. An amorphous Ni-Fe-B alloy with a smaller ΔEad-p displays a higher intrinsic activity. This study supplies a unique direction for use in constructing the structure-activity relationships of amorphous electrocatalysts by revealing the role of ΔEad-p, which promotes fundamental research and the practical application of amorphous electrocatalysts.

Molten Salt-Assisted Synthesis of Catalysts for Energy Conversion

A breakthrough in manufacturing procedures often enables people to obtain the desired functional materials. For the field of energy conversion, designing and constructing catalysts with high cost-effectiveness is urgently needed for commercial requirements. Herein, the molten salt-assisted synthesis (MSAS) strategy is emphasized, which combines the advantages of traditional solid and liquid phase synthesis of catalysts. It not only provides sufficient kinetic accessibility, but effectively controls the size, morphology, and crystal plane features of the product, thus possessing promising application prospects. Specifically, the selection and role of the molten salt system, as well as the mechanism of molten salt assistance are analyzed in depth. Then, the creation of the catalyst by the MSAS and the electrochemical energy conversion related application are introduced in detail. Finally, the key problems and countermeasures faced in breakthroughs are discussed and look forward to the future. Undoubtedly, this systematical review and insights here will promote the comprehensive understanding of the MSAS and further stimulate the generation of new and high efficiency catalysts.

Optimal Electrocatalyst Design Strategies for Acidic Oxygen Evolution

Hydrogen, a clean resource with high energy density, is one of the most promising alternatives to fossil. Proton exchange membrane water electrolyzers are beneficial for hydrogen production because of their high current density, facile operation, and high gas purity. However, the large-scale application of electrochemical water splitting to acidic electrolytes is severely limited by the sluggish kinetics of the anodic reaction and the inadequate development of corrosion- and highly oxidation-resistant anode catalysts. Therefore, anode catalysts with excellent performance and long-term durability must be developed for anodic oxygen evolution reactions (OER) in acidic media. This review comprehensively outlines three commonly employed strategies, namely, defect, phase, and structure engineering, to address the challenges within the acidic OER, while also identifying their existing limitations. Accordingly, the correlation between material design strategies and catalytic performance is discussed in terms of their contribution to high activity and long-term stability. In addition, various nanostructures that can effectively enhance the catalyst performance at the mesoscale are summarized from the perspective of engineering technology, thus providing suitable strategies for catalyst design that satisfy industrial requirements. Finally, the challenges and future outlook in the area of acidic OER are presented.

Structural and Compositional Optimization of Fe-Co-Ni Ternary Amorphous Electrocatalysts for Efficient Oxygen Evolution in Anion Exchange Membrane Water Electrolysis

Anion exchange membrane water electrolysis (AEMWE) offers a sustainable path for hydrogen production with advantages such as high current density, dynamic responsiveness, and low-cost electrocatalysts. However, the development of efficient and durable oxygen evolution reaction (OER) electrocatalysts under operating conditions is crucial for achieving the AEMWE. This study systematically investigated Fe-Co-Ni ternary amorphous electrocatalysts for the OER in AEMWE through a comprehensive material library system comprising 21 composition series. The study aims to explore the relationship between composition, degree of crystallinity, and electrocatalytic activity using ternary contours and binary plots to derive optimal catalysts. The findings reveal that higher Co and lower Fe contents lead to increased structural disorder within the Fe-Co-Ni system, whereas an appropriate amount of Fe addition is necessary for OER activity. It is concluded that the amorphous structure of Fe-Co3-Ni possesses an optimal ternary composition and degree of crystallinity to facilitate the OER. Post-OER analyses reveal that the optimized ternary amorphous structure induces structural reconstruction into an OER-favorable OOH-rich surface. The Fe-Co3-Ni electrocatalysts exhibit outstanding performances in both half-cells and single-cells, with an overpotential of 256 mV at 10 mA cm- 2 and a current density of 2.0 A cm- 2 at 1.89 V, respectively.

A Long-Range Disordering RuO2 Catalyst for Highly Efficient Acidic Oxygen Evolution Electrocatalysis

Non-iridium acid-stabilized electrocatalysts for oxygen evolution reaction (OER) are crucial to reducing the cost of proton exchange membrane water electrolyzers (PEMWEs). Here, we report a strategy to modulate the stability of RuO2 by doping boron (B) atoms, leading to the preparation of a RuO2 catalyst with long-range disorder (LD-B/RuO2). The structure of long-range disorder endowed LD-B/RuO2 with a low overpotential of 175 mV and an ultra-long stability, which can maintain OER for about 1.6 months at 10 mA cm-2 current density in 0.5 M H2SO4 with almost invariable performance. More importantly, a PEM electrolyzer using LD-B/RuO2 as the anode demonstrated excellent performance, reaching 1000 mA cm-2 at 1.63 V with durability exceeding 300 h at 250 mA cm-2 current density. The introduction of B atoms induced the formation of a long-range disordered structure and symmetry-breaking B-Ru-O motifs, which enabled the catalyst structure to a certain toughness while simultaneously inducing the redistribution of electrons on the active center Ru, which jointly promoted and guaranteed the activity and long-term stability of LD-B/RuO2. This study provides a strategy to prepare long-range disordered RuO2 acidic OER catalysts with high stability using B-doping to perturb crystallinity, which opens potential possibilities for non-iridium-based PEMWE applications.

Amorphous P-CoOX Promotes the Formation of Hypervalent Ni Species in NiFe LDHs by Amorphous/Crystalline Interfaces for Excellent Catalytic Performance of Oxygen Evolution Reaction

Water electrolysis has become an attractive hydrogen production method. Oxygen evolution reaction (OER) is a bottleneck of water splitting as its four-electron transfer procedure presents sluggish reaction kinetics. Designing composite catalysts with high performance for efficient OER still remains a huge challenge. Here, the P-doped cobalt oxide/NiFe layered double hydroxides (P-CoOX/NiFe LDHs) composite catalysts with amorphous/crystalline interfaces are successfully prepared for OER by hydrothermal-electrodeposition combined method. The results of electrochemical characterizations, operando Raman spectra, and DFT theoretical calculations have demonstrated the electrons in the P-CoOX/NiFe LDHs heterointerfaces are easily transferred from Ni2+ to Co3+ because that the amorphous configuration of P-CoOX can well induce Ni-O-Co orbital coupling. The electron transfer of Ni2+ to the surrounding Fe3+ and Co3+ will lead to the unoccupied eg orbitals of Ni3+ that can promote water dissociation and accelerate *OOH migration to improve OER catalytic performance. The optimized P-CoOX/NiFe LDHs exhibit superior catalytic performance for OER with a very low overpotential of 265 mV at 300 mA cm-2 and excellent long-term stability of 500 h with almost no attenuation at 100 mA cm-2. This work will provide a new method to design high-performance NiFe LDHs-based catalysts for OER.

Advancing catalytic oxidation of lean methane over cobalt-manganese oxide via a phase-engineered amorphous/crystalline interface

CoMnOx catalysts were prepared using a microwave (MW)/ultrasonic (US)-assisted method. Amorphous/crystalline regions in CoMnOx (MW = 250 W US = 300 W) increased the oxygen vacancy content and CoMnOx exhibited excellent activity for methane oxidation (T90 = 330 °C). A new approach is provided here to improve the activity of transition metal catalysts.

Amorphous MnRuOx Containing Microcrystalline for Enhanced Acidic Oxygen-Evolution Activity and Stability

Compared to Ir, Ru-based catalysts often exhibited higher activity but suffered significant and rapid activity loss during the challenging oxygen evolution reaction (OER) in a corrosive acidic environment. Herein, we developed a hybrid MnRuOx catalyst in which the RuO2 microcrystalline regions serve as a supporting framework, and the amorphous MnRuOx phase fills the microcrystalline interstices. In particular, the MnRuOx-300 catalyst from an annealing temperature of 300 °C contains an optimal amorphous/crystalline heterostructure, providing substantial defects and active sites, facilitating efficient adsorption and conversion of OH-. In addition, the heterostructure leads to a relative increase of the d-band center close to the Fermin level, thus accelerating electron transfer with reduced charge transfer resistance at the active interface between crystalline and amorphous phases during the OER. The catalyst was further thoroughly evaluated under various operating conditions and demonstrated exceptional activity and stability for the OER, representing a promising solution to replace Ir in water electrolyzers.

Amorphous/Crystalline Phases Mixed Nanosheets Array Rich in Oxygen Vacancies Boost Oxygen Evolution Reaction of Spinel Oxides in Alkaline Media

As promising oxygen evolution reaction (OER) catalysts, spinel-type oxides face the bottleneck of weak adsorption for oxygen-containing intermediates, so it is challenging to make a further breakthrough in remarkably lowering the OER overpotential. In this study, a novel strategy is proposed to substantially enhance the OER activity of spinel oxides based on amorphous/crystalline phases mixed spinel FeNi2O4 nanosheets array, enriched with oxygen vacancies, in situ grown on a nickel foam (NF). This unique architecture is achieved through a one-step millisecond laser direct writing method. The presence of amorphous phases with abundant oxygen vacancies significantly enhances the adsorption of oxygen-containing intermediates and changes the rate-determining step from OH*→O* to O*→OOH*, which greatly reduces the thermodynamic energy barrier. Moreover, the crystalline phase interweaving with amorphous domains serves as a conductive shortcut to facilitate rapid electron transfer from active sites in the amorphous domain to NF, guaranteeing fast OER kinetics. Such an anodic electrode exhibits a nearly ten fold enhancement in OER intrinsic activity compared to the pristine counterpart. Remarkably, it demonstrates record-low overpotentials of 246 and 315 mV at 50 and 500 mA cm-2 in 1 m KOH with superior long-term stability, outperforming other NiFe-based spinel oxides catalysts.

Universal Synthesis of Amorphous Metal Oxide Nanomeshes

Constructing the pore structures in amorphous metal oxide nanosheets can enhance their electrocatalytic performance by efficiently increasing specific surface areas and facilitating mass transport in electrocatalysis. However, the accurate synthesis for porous amorphous metal oxide nanosheets remains a challenge. Herein, a facile nitrate-assisted oxidation strategy is reported for synthesizing amorphous mesoporous iridium oxide nanomeshes (a-m IrOx NMs) with a pore size of ∼4 nm. X-ray absorption characterizations indicate that a-m IrOx NMs possess stretched Ir─O bonds and weaker Ir-O interaction compared with commercial IrO2. Combining thermogravimetric-fourier transform infrared spectroscopy with differential scanning calorimetry measurements, it is demonstrated that sodium nitrate, acting as an oxidizing agent, is conducive to the formation of amorphous nanosheets, while the NO2 produced by the in situ decomposition of nitrates facilitates the generation of pores within the nanomeshes. As an anode electrocatalyst in proton exchange membrane water electrolyzer, a-m IrOx NMs exhibit superior performance, maintaining a cell voltage of 1.67 V at 1 A cm-2 for 120 h without obvious decay with a low loading (0.4 mgcatalyst cm-2). Furthermore, the nitrate-assisted method is demonstrated to be a general approach to prepare various amorphous metal oxide nanomeshes, including amorphous RhOx, TiOx, ZrOx, AlOx, and HfOx nanomeshes.

Advances in Noble Metal Electrocatalysts for Acidic Oxygen Evolution Reaction: Construction of Under-Coordinated Active Sites

Renewable energy-driven proton exchange membrane water electrolyzer (PEMWE) attracts widespread attention as a zero-emission and sustainable technology. Oxygen evolution reaction (OER) catalysts with sluggish OER kinetics and rapid deactivation are major obstacles to the widespread commercialization of PEMWE. To date, although various advanced electrocatalysts have been reported to enhance acidic OER performance, Ru/Ir-based nanomaterials remain the most promising catalysts for PEMWE applications. Therefore, there is an urgent need to develop efficient, stable, and cost-effective Ru/Ir catalysts. Since the structure-performance relationship is one of the most important tools for studying the reaction mechanism and constructing the optimal catalytic system. In this review, the recent research progress from the construction of unsaturated sites to gain a deeper understanding of the reaction and deactivation mechanism of catalysts is summarized. First, a general understanding of OER reaction mechanism, catalyst dissolution mechanism, and active site structure is provided. Then, advances in the design and synthesis of advanced acidic OER catalysts are reviewed in terms of the classification of unsaturated active site design, i.e., alloy, core-shell, single-atom, and framework structures. Finally, challenges and perspectives are presented for the future development of OER catalysts and renewable energy technologies for hydrogen production.

Direct Electroplating Ruthenium Precursor on the Surface Oxidized Nickel Foam for Efficient and Stable Bifunctional Alkaline Water Electrolysis

Water electrolysis to produce hydrogen (H2) using renewable energy is one of the most promising candidates for realizing carbon neutrality, but its reaction kinetics is hindered by sluggish anodic oxygen evolution reaction (OER). Ruthenium (Ru) in its high-valence state (oxide) provides one of the most active OER sites and is less costly, but thermodynamically unstable. The strong interaction between Ru nanoparticles (NPs) and nickel hydroxide (Ni(OH)2) is leveraged to directly form Ru-Ni(OH)2 on the surface of a porous nickel foam (NF) electrode via spontaneous galvanic replacement reaction. The formation of Ru─O─Ni bonds at the interface of the Ru NPs and Ni(OH)2 (Ru-Ni(OH)2) on the surface oxidized NF significantly enhance stability of the Ru-Ni(OH)2/NF electrode. In addition to OER, the catalyst is active enough for the hydrogen evolution reaction (HER). As a result, it is able to deliver overpotentials of 228 and 15 mV to reach 10 mA cm-2 for OER and HER, respectively. An industry-scale evaluation using Ru-Ni(OH)2/NF as both OER and HER electrodes demonstrates a high current density of 1500 mA cm-2 (OER: 410 mV; HER: 240 mV), surpassing commercial RuO2 (OER: 600 mV) and Pt/C based performance (HER: 265 mV).

Site-Selective Growth of fcc-2H-fcc Copper on Unconventional Phase Metal Nanomaterials for Highly Efficient Tandem CO2 Electroreduction

Copper (Cu) nanomaterials are a unique kind of electrocatalysts for high-value multi-carbon production in carbon dioxide reduction reaction (CO2RR), which holds enormous potential in attaining carbon neutrality. However, phase engineering of Cu nanomaterials remains challenging, especially for the construction of unconventional phase Cu-based asymmetric heteronanostructures. Here the site-selective growth of Cu on unusual phase gold (Au) nanorods, obtaining three kinds of heterophase fcc-2H-fcc Au-Cu heteronanostructures is reported. Significantly, the resultant fcc-2H-fcc Au-Cu Janus nanostructures (JNSs) break the symmetric growth mode of Cu on Au. In electrocatalytic CO2RR, the fcc-2H-fcc Au-Cu JNSs exhibit excellent performance in both H-type and flow cells, with Faradaic efficiencies of 55.5% and 84.3% for ethylene and multi-carbon products, respectively. In situ characterizations and theoretical calculations reveal the co-exposure of 2H-Au and 2H-Cu domains in Au-Cu JNSs diversifies the CO* adsorption configurations and promotes the CO* spillover and subsequent C-C coupling toward ethylene generation with reduced energy barriers.

2D Ruthenium-Chromium Oxide with Rich Grain Boundaries Boosts Acidic Oxygen Evolution Reaction Kinetics

Ruthenium oxide is currently considered as the promising alternative to Ir-based catalysts employed for proton exchange membrane water electrolyzers but still faces the bottlenecks of limited durability and slow kinetics. Herein, a 2D amorphous/crystalline heterophase ac-Cr0.53Ru0.47O2-δ substitutional solid solution with pervasive grain boundaries (GBs) is developed to accelerate the kinetics of acidic oxygen evolution reaction (OER) and extend the long-term stability simultaneously. The ac-Cr0.53Ru0.47O2-δ shows a super stability with a slow degradation rate and a remarkable mass activity of 455 A gRu -1 at 1.6 V vs RHE, which is ≈3.6- and 5.9-fold higher than those of synthesized RuO2 and commercial RuO2, respectively. The strong interaction of Cr-O-Ru local units in synergy with the specific 2D structural characteristics of ac-Cr0.53Ru0.47O2-δ dominates its enhanced stability. Meanwhile, high-density GBs and the shortened Ru-O bonds tailored by amorphous/crystalline structure and Cr-O-Ru interaction regulate the adsorption and desorption rates of oxygen intermediates, thus accelerating the overall acidic OER kinetics.

Alloying Pd with Ru enables electroreduction of nitrate to ammonia with ∼100% faradaic efficiency over a wide potential window

Electrocatalytic nitrate (NO3-) reduction reaction (eNO3-RR) to ammonia under ambient conditions is deemed a sustainable route for wastewater treatment and a promising alternative to the Haber-Bosch process. However, there is still a lack of efficient electrocatalysts to achieve high NH3 production performance at wastewater-relevant low NO3- concentrations. Herein, we report a Pd74Ru26 bimetallic nanocrystal (NC) electrocatalyst capable of exhibiting an average NH3 FE of ∼100% over a wide potential window from 0.1 to -0.3 V (vs. reversible hydrogen electrode, RHE) at a low NO3- concentration of 32.3 mM. The average NH3 yield rate at -0.3 V can reach 16.20 mg h-1 cm-2. Meanwhile, Pd74Ru26 also demonstrates excellent electrocatalytic stability for over 110 h. Experimental investigations and density functional theory (DFT) calculations suggest that the electronic structure modulation between Pd and Ru favors the optimization of NO3- transport with respect to single components. Along the *NO3 reduction pathway, the synergy between Pd and Ru can also lower the energy barrier of the rate-determining steps (RDSs) on Ru and Pd, which are the protonation of *NO2 and *NO, respectively. Finally, this unique alloying design achieves a high-level dynamic equilibrium of adsorption and coupling between *H and various nitrogen intermediates during eNO3-RR.

Bifunctional Electrocatalysts for Overall and Hybrid Water Splitting

Electrocatalytic water splitting driven by renewable electricity has been recognized as a promising approach for green hydrogen production. Different from conventional strategies in developing electrocatalysts for the two half-reactions of water splitting (e.g., the hydrogen and oxygen evolution reactions, HER and OER) separately, there has been a growing interest in designing and developing bifunctional electrocatalysts, which are able to catalyze both the HER and OER. In addition, considering the high overpotentials required for OER while limited value of the produced oxygen, there is another rapidly growing interest in exploring alternative oxidation reactions to replace OER for hybrid water splitting toward energy-efficient hydrogen generation. This Review begins with an introduction on the fundamental aspects of water splitting, followed by a thorough discussion on various physicochemical characterization techniques that are frequently employed in probing the active sites, with an emphasis on the reconstruction of bifunctional electrocatalysts during redox electrolysis. The design, synthesis, and performance of diverse bifunctional electrocatalysts based on noble metals, nonprecious metals, and metal-free nanocarbons, for overall water splitting in acidic and alkaline electrolytes, are thoroughly summarized and compared. Next, their application toward hybrid water splitting is also presented, wherein the alternative anodic reactions include sacrificing agents oxidation, pollutants oxidative degradation, and organics oxidative upgrading. Finally, a concise statement on the current challenges and future opportunities of bifunctional electrocatalysts for both overall and hybrid water splitting is presented in the hope of guiding future endeavors in the quest for energy-efficient and sustainable green hydrogen production.

Surface Engineered Single-atom Systems for Energy Conversion

Single-atom catalysts (SACs) are demonstrated to show exceptional reactivity and selectivity in catalytic reactions by effectively utilizing metal species, making them a favorable choice among the different active materials for energy conversion. However, SACs are still in the early stages of energy conversion, and problems like agglomeration and low energy conversion efficiency are hampering their practical applications. Substantial research focus on support modifications, which are vital for SAC reactivity and stability due to the intimate relationship between metal atoms and support. In this review, a category of supports and a variety of surface engineering strategies employed in SA systems are summarized, including surface site engineering (heteroatom doping, vacancy introducing, surface groups grafting, and coordination tunning) and surface structure engineering (size/morphology control, cocatalyst deposition, facet engineering, and crystallinity control). Also, the merits of support surface engineering in single-atom systems are systematically introduced. Highlights are the comprehensive summary and discussions on the utilization of surface-engineered SACs in diversified energy conversion applications including photocatalysis, electrocatalysis, thermocatalysis, and energy conversion devices. At the end of this review, the potential and obstacles of using surface-engineered SACs in the field of energy conversion are discussed. This review aims to guide the rational design and manipulation of SACs for target-specific applications by capitalizing on the characteristic benefits of support surface engineering.

Engineering the Coordination Environment of Ir Single Atoms with Surface Titanium Oxide Amorphization for Superior Chlorine Evolution Reaction

The chlorine evolution reaction (CER) is essential for industrial Cl2 production but strongly relies on the use of dimensionally stable anode (DSA) with high-amount precious Ru/Ir oxide on a Ti substrate. For the purpose of sustainable development, precious metal decrement and performance improvement are highly desirable for the development of CER anodes. Herein, we demonstrate that surface titanium oxide amorphization is crucial to regulate the coordination environment of stabilized Ir single atoms for efficient and durable chlorine evolution of Ti monolithic anodes. Experimental and theoretical results revealed the formation of four-coordinated Ir1O4 and six-coordinated Ir1O6 sites on amorphous and crystalline titanium oxides, respectively. Interestingly, the Ir1O4 sites exhibited a superior CER performance, with a mass activity about 10 and 500 times those of the Ir1O6 counterpart and DSA, respectively. Moreover, the Ir1O4 anode displayed excellent durability for 200 h, far longer than that of its Ir1O6 counterpart (2 h). Mechanism studies showed that the unsaturated Ir in Ir1O4 was the active center for chlorine evolution, which was changed to the top-coordinated O in Ir1O6. This change of active sites greatly affected the adsorption energy of Cl species, thus accounting for their different CER activity. More importantly, the amorphous structure and restrained water dissociation of Ir1O4 synergistically prevent oxygen permeation across the Ti substrate, contributing to its long-term CER stability. This study sheds light on the importance of single-atom coordination structures in the reactivity of catalysts and offers a facile strategy to prepare highly active single-atom CER anodes via surface titanium oxide amorphization.

Application of Amorphous-Crystalline Coupling Materials in Electrocatalysis

Interface engineering has proven to be a highly efficient strategy for modulating the physicochemical properties of electrocatalysts and further enhancing their electrochemical performance in related energy applications. In this context, the newly proposed crystalline-amorphous (c-a) heterostructures with unusual atomic arrangements at interfaces show strong competitiveness. Nonetheless, few efforts have been made to reveal and summarize the structure-activity relationship at the two-phase interface and the corresponding electrocatalytic mechanism. This concept is devoted to comprehensively discussing the fundamental characteristics of crystalline-amorphous electrocatalysts and their application in the field of energy conversion with typical examples. In addition, the development prospects and opportunities of crystalline-amorphous heterostructure are summarized to provide potential development directions for other types of clean energy development.

Integrating hydrogen utilization in CO2 electrolysis with reduced energy loss

Electrochemical carbon dioxide reduction reaction using sustainable energy is a promising approach of synthesizing chemicals and fuels, yet is highly energy intensive. The oxygen evolution reaction is particularly problematic, which is kinetically sluggish and causes anodic carbon loss. In this context, we couple CO2 electrolysis with hydrogen oxidation reaction in a single electrochemical cell. A Ni(OH)2/NiOOH mediator is used to fully suppress the anodic carbon loss and hydrogen oxidation catalyst poisoning by migrated reaction products. This cell is highly flexible in producing either gaseous (CO) or soluble (formate) products with high selectivity (up to 95.3%) and stability (>100 h) at voltages below 0.9 V (50 mA cm-2). Importantly, thanks to the "transferred" oxygen evolution reaction to a water electrolyzer with thermodynamically and kinetically favored reaction conditions, the total polarization loss and energy consumption of our H2-integrated CO2 reduction reaction, including those for hydrogen generation, are reduced up to 22% and 42%, respectively. This work demonstrates the opportunity of combining CO2 electrolysis with the hydrogen economy, paving the way to the possible integration of various emerging energy conversion and storage approaches for improved energy/cost effectiveness.

Heterointerface manipulation in the architecture of Co-Mo2C@NC boosts water electrolysis

Heterostructures with tunable electronic properties have shown great potential in water electrolysis for the replacement of current benchmark precious metals. However, constructing heterostructures with sufficient interfaces to strengthen the synergistic effect of multiple species still remains a challenge due to phase separation. Herein, an efficient electrocatalyst composed of a nanosized cobalt/Mo2C heterostructure anchored on N-doped carbon (Co-Mo2C@NC) was achieved by in situ topotactic phase transformation. With the merits of high conductivity, hierarchical pores, and strong electronic interaction between Co and Mo2C, the Co-Mo2C@5NC-4 catalyst shows excellent activity with a low overpotential for the hydrogen evolution reaction (HER, 89 mV@10 mA cm-2 in alkaline medium; 143 mV@10 mA cm-2 in acidic medium) and oxygen evolution reaction (OER, 356 mV@10 mA cm-2 in alkaline medium), as well as high stability. Furthermore, this catalyst in an electrolyzer shows efficient activity for overall water splitting and long-term durability. Theoretical calculations reveal the optimized adsorption-desorption behaviour of hydrogen intermediates on the generated cobalt layered hydroxide (Co LDH)/Mo2C interfaces, resulting in boosting alkaline water electrolysis. This work proposes a new interface-engineering perspective for the construction of high-activity heterostructures for electrochemical conversion.

Boosting electrocatalytic performance via electronic structure regulation for acidic oxygen evolution

High-purity hydrogen produced by water electrolysis has become a sustainable energy carrier. Due to the corrosive environments and strong oxidizing working conditions, the main challenge faced by acidic water oxidation is the decrease in the activity and stability of anodic electrocatalysts. To address this issue, efficient strategies have been developed to design electrocatalysts toward acidic OER with excellent intrinsic performance. Electronic structure modification achieved through defect engineering, doping, alloying, atomic arrangement, surface reconstruction, and constructing metal-support interactions provides an effective means to boost OER. Based on introducing OER mechanism commonly present in acidic environments, this review comprehensively summarizes the effective strategies for regulating the electronic structure to boost the activity and stability of catalytic materials. Finally, several promising research directions are discussed to inspire the design and synthesis of high-performance acidic OER electrocatalysts.

Constructing Interfacial Oxygen Vacancy and Ruthenium Lewis Acid-Base Pairs to Boost the Alkaline Hydrogen Evolution Reaction Kinetics

Simultaneous optimization of the energy level of water dissociation, hydrogen and hydroxide desorption is the key to achieving fast kinetics for the alkaline hydrogen evolution reaction (HER). Herein, the well-dispersed Ru clusters on the surface of amorphous/crystalline CeO2-δ (Ru/ac-CeO2-δ ) is demonstrated to be an excellent electrocatalyst for significantly boosting the alkaline HER kinetics owing to the presence of unique oxygen vacancy (VO ) and Ru Lewis acid-base pairs (LABPs). The representative Ru/ac-CeO2-δ exhibits an outstanding mass activity of 7180 mA mgRu -1 that is approximately 9 times higher than that of commercial Pt/C at the potential of -0.1 V (V vs RHE) and an extremely low overpotential of 21.2 mV at a geometric current density of 10 mA cm-2 . Experimental and theoretical studies reveal that the VO as Lewis acid sites facilitate the adsorption of H2 O and cleavage of H-OH bonds, meanwhile, the weak Lewis basic Ru clusters favor for the hydrogen desorption. Importantly, the desorption of OH from VO sites is accelerated via a water-assisted proton exchange pathway, and thus boost the kinetics of alkaline HER. This study sheds new light on the design of high-efficiency electrocatalysts with LABPs for the enhanced alkaline HER.

Manipulation of Electron Spins with Oxygen Vacancy on Amorphous/Crystalline Composite-Type Catalyst

By substituting the oxygen evolution reaction (OER) with the anodic urea oxidation reaction (UOR), it not only reduces energy consumption for green hydrogen generation but also allows purification of urea-rich wastewater. Spin engineering of the d orbital and oxygen-containing adsorbates has been recognized as an effective pathway for enhancing the performance of electrocatalysts. In this work, we report the fabrication of a bifunctional electrocatalyst composed of amorphous RuO2-coated NiO ultrathin nanosheets (a-RuO2/NiO) with abundant amorphous/crystalline interfaces for hydrogen evolution reaction (HER) and UOR. Impressively, only 1.372 V of voltage is required to attain a current density of 10 mA cm-2 over a urea electrolyzer. The increased oxygen vacancies in a-RuO2/NiO by incorporation of amorphous RuO2 enhance the total magnetization and entail numerous spin-polarized electrons during the reaction, which speeds up the UOR reaction kinetics. The density functional theory study reveals that the amorphous/crystalline interfaces promote charge-carrier transfer, and the tailored d-band center endows the optimized adsorption of oxygen-generated intermediates. This kind of oxygen vacancy induced spin-polarized electrons toward boosting HER and UOR kinetics and provides a reliable reference for exploration of advanced electrocatalysts.

Promoting Nitrite-to-Ammonia Electroreduction over Amorphous CoS2 Nanorods

Electrocatalytic nitrite reduction to ammonia (NO2RR) emerges as a promising route to simultaneously attain harmful NO2- removal and green NH3 synthesis. In this study, amorphous CoS2 nanorods (a-CoS2) are first demonstrated as an effective NO2RR catalyst, which exhibits the maximum FENH3 of 88.7% and NH3 yield rate of 438.1 μmol h-1 cm-2 at -0.6 V vs RHE. Detailed experimental and computational investigations reveal that the high NO2RR performance of a-CoS2 originates from the amorphization-induced S vacancies to facilitate NO2- activation and hydrogenation, boost the electron transport kinetics, and inhibit the competitive hydrogen evolution.

Metal Alloys-Structured Electrocatalysts: Metal-Metal Interactions, Coordination Microenvironments, and Structural Property-Reactivity Relationships

Metal alloys-structured electrocatalysts (MAECs) have made essential contributions to accelerating the practical applications of electrocatalytic devices in renewable energy systems. However, due to the complex atomic structures, varied electronic states, and abundant supports, precisely decoding the metal-metal interactions and structure-activity relationships of MAECs still confronts great challenges, which is critical to direct the future engineering and optimization of MAECs. Here, this timely review comprehensively summarizes the latest advances in creating the MAECs, including the metal-metal interactions, coordination microenvironments, and structure-activity relationships. First, the fundamental classification, design, characterization, and structural reconstruction of MAECs are outlined. Then, the electrocatalytic merits and modulation strategies of recent breakthroughs for noble and non-noble metal-structured MAECs are thoroughly discussed, such as solid solution alloys, intermetallic alloys, and single-atom alloys. Particularly, unique insights into the bond interactions, theoretical understanding, and operando techniques for mechanism disclosure are given. Thereafter, the current states of diverse MAECs with a unique focus on structural property-reactivity relationships, reaction pathways, and performance comparisons are discussed. Finally, the future challenges and perspectives for MAECs are systematically discussed. It is believed that this comprehensive review can offer a substantial impact on stimulating the widespread utilization of metal alloys-structured materials in electrocatalysis.

Intermetallic Nanocrystals for Fuel-Cells-Based Electrocatalysis

Electrocatalysis underpins the renewable electrochemical conversions for sustainability, which further replies on metallic nanocrystals as vital electrocatalysts. Intermetallic nanocrystals have been known to show distinct properties compared to their disordered counterparts, and been long explored for functional improvements. Tremendous progresses have been made in the past few years, with notable trend of more precise engineering down to an atomic level and the investigation transferring into more practical membrane electrode assembly (MEA), which motivates this timely review. After addressing the basic thermodynamic and kinetic fundamentals, we discuss classic and latest synthetic strategies that enable not only the formation of intermetallic phase but also the rational control of other catalysis-determinant structural parameters, such as size and morphology. We also demonstrate the emerging intermetallic nanomaterials for potentially further advancement in energy electrocatalysis. Then, we discuss the state-of-the-art characterizations and representative intermetallic electrocatalysts with emphasis on oxygen reduction reaction evaluated in a MEA setup. We summarize this review by laying out existing challenges and offering perspective on future research directions toward practicing intermetallic electrocatalysts for energy conversions.

Amorphous-crystalline heterostructures enable energy-level matching of cobalt sulfide/nickel iron layered double hydroxide for efficient oxygen evolution reaction

Interface engineering of heterostructures has emerged as a promising approach to enhance the catalytic activity of nonprecious electrocatalysts. Herein, a novel amorphous cobalt sulfide-crystalline nickel iron layered double hydroxide (a-CoS@NiFe-LDH) hybrid material is presented for application as an electrocatalyst for oxygen evolution reaction (OER). Benefitting from the well-matched energy level structures, the a-CoS@NiFe-LDH catalyst delivers a low overpotential of 221 ± 14 mV at an OER current density of 20 mA cm-2 and a small Tafel slope of 83.1 mV dec-1, showing good OER properties. First-principle computations reveal that the electronic interaction between amorphous cobalt sulfide (a-CoS) and crystalline nickel iron layered double hydroxide (NiFe-LDH) components within a-CoS@NiFe-LDH promotes the adsorbate evolution mechanism and reduces the adsorption energies for oxygen intermediates, thereby enhancing the activity and stability for OER. This work opens up a new avenue to enhance the OER catalytic efficiency via the construction of amorphous-crystalline heterostructures.

Engineering of heterointerface of ultrathin carbon nanosheet-supported CoN/MnO enhances oxygen electrocatalysis for rechargeable Zn-air batteries

Designing bifunctional electrocatalysts with outstanding reactivity and durability towards the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) has remained a long-term aim for metal-air batteries. Achieving the high level of fusion between two distinct metal components to form bifunctional catalysts with optimized heterointerfaces and well-defined morphology holds noteworthy implications in the enhancement of electrocatalytic activity yet challenging. Herein, the fabrication of numerous heterointerfaces of CoN/MnO is successfully realized within ultrathin carbon nanosheets via a feasible self-templating synthesis strategy. Experimental results and theoretic calculations verify that the interfacial electron transfer from CoN to MnO at the heterointerface engenders an ameliorated charge transfer velocity, finely tuned energy barriers concerning reaction intermediates and ultimately accelerated reaction kinetics. The as-prepared CoN/MnO@NC demonstrates exceptional bifunctional catalytic performance, excelling in both OER and ORR showcasing a low reversible overpotential of 0.69 V. Furthermore, rechargeable liquid and quasi-solid-state flexible Zn-air batteries employing CoN/MnO@NC as the air-cathode deliver remarkable endurance and elevated power density, registering values of 153 and 116 mW cm-2 respectively and exceeding Pt/C + RuO2 counterparts and those reported in literature. Deeply exploring the effect of electron-accumulated heterointerfaces on catalytic activity would contribute wisdom to the development of bifunctional electrocatalysts for rechargeable metal-air batteries.

Electrocatalytic Water Oxidation Activity-Stability Maps for Perovskite Oxides Containing 3d, 4d and 5d Transition Metals

Improving catalytic activity without loss of catalytic stability is one of the core goals in search of low-iridium-content oxygen evolution electrocatalysts under acidic conditions. Here, we synthesize a family of 66 SrBO3 perovskite oxides (B=Ti, Ru, Ir) with different Ti : Ru : Ir atomic ratios and construct catalytic activity-stability maps over composition variation. The maps classify the multicomponent perovskites into chemical groups with distinct catalytic activity and stability for acidic oxygen evolution reaction, and highlights a chemical region where high catalytic activity and stability are achieved simultaneously at a relatively low iridium level. By quantifying the extent of hybridization of mixed transition metal 3d-4d-5d and oxygen 2p orbitals for multicomponent perovskites, we demonstrate this complex interplay between 3d-4d-5d metals and oxygen atoms in governing the trends in both activity and stability as well as in determining the catalytic mechanism involving lattice oxygen or not.

Metastable Hexagonal-Phase Nickel with Ultralow Pt Content for an Efficient Alkaline/Seawater Hydrogen Evolution Reaction

Hydrogen has been hailed as the core of the world's future energy architecture. It is imperative to develop catalysts with an efficient and sustained hydrogen evolution reaction (HER) to scale up alkaline/seawater electrolysis, yet significant difficulties and challenges, such as the high usage of precious metals, still remain. In this paper, a metastable-phase hexagonal close-packed (hcp) Ni-based catalyst with ultralow Pt content (3.1 at %) was designed, which has excellent catalytic performance in the alkaline/seawater HER. The optimal catalyst offers low overpotentials of 21 and 137 mV at 10 mA cm-2 and remains stable during operation for 100 and 300 h at this current density in 1.0 M KOH and real seawater, respectively. A mechanistic study shows that the metastable-phase Ni acts as an anchor site for OH-, which promotes the dissociation of water and greatly improves the formation rate of H2.