Benchmark performance of low-cost Sb2Se3 photocathodes for unassisted solar overall water splitting

Chemistry of Materials Underpinning Photoelectrochemical Solar Fuel Production

Since its inception, photoelectrochemistry has sought to power the generation of fuels, particularly hydrogen, using energy from sunlight. Efficient and durable photoelectrodes, however, remain elusive. Here we review the current state of the art, focusing our discussion on advances in photoelectrodes made in the past decade. We open by briefly discussing fundamental photoelectrochemical concepts and implications for photoelectrode function. We next review a broad range of semiconductor photoelectrodes broken down by material class (oxides, nitrides, chalcogenides, and mature photovoltaic semiconductors), identifying intrinsic properties and discussing their influence on performance. We then identify innovative in situ and operando techniques to directly probe the photoelectrode|electrolyte interface, enabling direct assessment of structure-property relationships for catalytic surfaces in active reaction environments. We close by considering more complex photoelectrochemical fuel-forming reactions (carbon dioxide and nitrogen reduction, as well as alternative oxidation reactions), where product selectivity imposes additional criteria on electrochemical driving force and photoelectrode architecture. By contextualizing recent literature within a fundamental framework, we seek to provide direction for continued progress toward achieving efficient and stable fuel-forming photoelectrodes.

Pt-free MoS2 co-catalyst enables record photocurrent density in Sb2Se3 photocathodes for highly efficient solar hydrogen production

Antimony selenide (Sb2Se3) emerges as a potential light-absorbing material for thin film photovoltaics and photoelectrochemical (PEC) water-splitting devices, due to its earth-abundant constituents and excellent photoelectric properties. However, losses caused by corrosion and sluggish charge transfer at the semiconductor/electrolyte interface require a co-catalyst to enhance these kinetic factors. In this study, MoS2 is employed as a cost-effective, noble-metal-free catalyst to enhance the photocurrent density (J ph), half-cell solar-to-hydrogen (HC-STH) conversion efficiency and stability of Sb2Se3-based photocathodes. Optimized thermodynamic/kinetic physical vapor deposition of MoS2 substantially improves PEC performance, resulting champion Mo/Sb2Se3/CdS/MoS2 photocathode that achieves a record J ph of 31.03 mA cm-2 at 0 V RHE and the highest HC-STH efficiency of 3.08%, along with stability for over 5 hours in an acidic (pH 1) buffer solution. It is systematically revealed that MoS2 reduces the photo-corrosion effect, decreases electron-hole recombination, and provides a significant increase in charge transfer efficiency at the semiconductor/electrolyte interface. This work highlights the potential of cost-effective, high-performance Sb2Se3-based photocathodes in advancing efficient PEC devices for solar hydrogen production.

Highest Solar-to-Hydrogen Conversion Efficiency in Cu2ZnSnS4 Photocathodes and Its Directly Unbiased Solar Seawater Splitting

Despite being an excellent candidate for a photocathode, Cu2ZnSnS4 (CZTS) performance is limited by suboptimal bulk and interfacial charge carrier dynamics. In this work, we introduce a facile and versatile CZTS precursor seed layer engineering technique, which significantly enhances crystal growth and mitigates detrimental defects in the post-sulfurized CZTS light-absorbing films. This effective optimization of defects and charge carrier dynamics results in a highly efficient CZTS/CdS/TiO2/Pt thin-film photocathode, achieving a record half-cell solar-to-hydrogen (HC-STH) conversion efficiency of 9.91%. Additionally, the photocathode exhibits a highest photocurrent density (Jph) of 29.44 mA cm-2 (at 0 VRHE) and favorable onset potential (Von) of 0.73 VRHE. Furthermore, our CTZS photocathode demonstrates a remarkable Jph of 16.54 mA cm-2 and HC-STH efficiency of 2.56% in natural seawater, followed by an impressive unbiased STH efficiency of 2.20% in a CZTS-BiVO4 tandem cell. The scalability of this approach is underscored by the successful fabrication of a 4 × 4 cm2 module, highlighting its significant potential for practical, unbiased in situ solar seawater splitting applications.

Charge Carrier Separation Enhancement Mechanism in Eco-Friendly CZTSSe/(Zn, Sn)O Thin-Film Photocathodes for Highly Efficient Solar-To-Hydrogen Evolution

Kesterite Cu2ZnSn(S,Se)4 (CZTSSe)-based photocathodes present promising solutions for solar hydrogen evolution, owing to their non-toxic, cost-effective nature and exceptional photoelectrochemical (PEC) properties. Traditionally, the development of CZTSSe-based photocathodes for PEC water splitting have utilized CdS as the electron transport layer (ETL) owing to its favorable band alignment with the CZTSSe light-absorbing thin film. However, its environmental concerns pose a significant challenge. Therefore, it is crucial to identifying an eco-friendly ETL that ensures effective band alignment with kesterite materials. In this study, the Zn/Sn ratio and the thickness of the (Zn,Sn)O buffer layer is optimized to fabricate a Cd-free CZTSSe/(Zn,Sn)O/TiO₂/Pt photocathode. This design not only promotes environmental safety but also establishes optimal spike-like band alignments with the CZTSSe thin film. The optimized photocathode demonstrates excellent charge carrier separation and transfer, resulting in a photocurrent density of 29.80 mA cm- 2 at 0 VRHE and a half-cell solar-to-hydrogen (HC-STH) conversion efficiency of 4.0% in a 0.5 M H₂SO₄ electrolyte. As research continues to optimize the alternative materials, Cd-free CZTSSe/(Zn, Sn)O-based photocathodes along with their eco-friendly nature hold great promise for achieving competitive efficiencies in sustainable solar-to-hydrogen energy applications.

Coupling furfural oxidation for bias-free hydrogen production using crystalline silicon photoelectrodes

To commercialize the technology of photoelectrochemical hydrogen production, it is essential to surpass the US. Department of Energy target of 0.36 mmol h-1 cm-2 for 1-sun hydrogen production rate. In this study, we utilize crystalline silicon, which can exhibit the highest photocurrent density (43.37 mA cm-2), as the photoelectrode material. However, achieving bias-free water splitting (>1.6 V) remains challenging due to the intrinsic low photovoltage of crystalline silicon (0.6 V). To address this limitation, we replace water oxidation with low-potential furfural oxidation, enabling not only bias-free hydrogen production but also dual hydrogen production at both the cathodic and anodic sides. This approach results in a record 1-sun hydrogen production rate of 1.40 mmol h-1 cm-2, exceeding the Department of Energy target by more than fourfold.

Enhanced solar hydrogen production via reconfigured semi-polar facet/cocatalyst heterointerfaces in GaN/Si photocathodes

The development of an efficient and durable photoelectrode is critical for achieving large-scale applications in photoelectrochemical water splitting. Here, we report a unique photoelectrode composed of reconfigured gallium nitride nanowire-on-silicon wafer loaded with Au nanoparticles as cocatalyst that achieved an impressive applied bias photon-to-current efficiency of 10.36% under AM 1.5G one sun illumination while exhibiting stable PEC hydrogen evolution over 800 h at a high current density. Specifically, by tailoring the GaN nanowires via a simple alkaline-etching step to expose the inner (101 ¯ 1 ¯ ) facets, we achieve a highly coupled semiconductor nanowire-cocatalyst heterointerface with strong electron interaction. The strongly coupled reconfigured GaN nanowire/Au heterointerface not only optimizes the electronic structure of Au nanoparticles to form abundant highly active interfacial regions, eventually realizing superior hydrogen evolution activity but also enables GaN nanowires to provide a stronger anchoring effect for Au nanoparticles, preventing the detachment of Au nanoparticles during the intense hydrogen evolution process. The proposed photoelectrode offers a feasible structure for overcoming the efficiency-reliability bottleneck of PEC devices for producing clean hydrogen fuel.

Heterogeneous Nucleation Regulation Amends Unfavorable Crystallization Orientation and Defect Features of Antimony Selenosulfide Film for High-Efficient Planar Solar Cells

Antimony selenosulfide (Sb2(S,Se)3) has obtained widespread concern for photovoltaic applications as a light absorber due to superior photoelectric features. Accordingly, various deposition technologies have been developed in recent years, especially hydrothermal deposition method, which has achieved a great success. However, device performances are limited with severe carrier recombination, relating to the quality of absorber and interfaces. Herein, bulk and interface defects are simultaneously suppressed by regulating heterogeneous nucleation kinetics with barium dibromide (BaBr2) introduction. In details, the Br adsorbs and dopes on the polar planes of cadmium sulfide (CdS) buffer layer, promoting the exposure of nonpolar planes of CdS, which facilitates the favorable growth of [hk1]-Sb2(S,Se)3 films possessing superior crystallinity and small interface defects. Additionally, the Se/S ratio is increased due to the replacement of Se by Br, causing a downshift of the Fermi levels with a benign band alignment and a shallow-level defect. Moreover, Ba2+ is located at grain boundaries by coordination with S and Se ions, passivating grain boundary defects. Consequently, the efficiency is increased from 7.70 % to 10.12 %. This work opens an avenue towards regulating the heterogeneous nucleation kinetics of Sb2(S,Se)3 film deposited via hydrothermal deposition approach to optimize its crystalline orientation and defect features.

Origin of Enhanced Photoelectrochemical Activity of the n-CdS/p-type Semiconductor Interface: Homojunction or Heterojunction?

Surface engineering of photoelectrodes is considered critical for achieving efficient photoelectrochemical (PEC) cells, and various p-type materials have been investigated for use as photoelectrodes. Among these, the p-type semiconductor/n-type CdS heterojunction is the most successful photocathode structure because of its enhanced onset potential and photocurrent. However, it is determined that the main contributor to the enhanced activity is the Cd-doped layer and not the CdS layer. In this study, a Cd-doped n+p-buried homojunction of a CuInS2 photocathode is first demonstrated without a CdS layer. The homojunction exhibited a more active and stable PEC performance than the CdS/CuInS2 heterojunction. Moreover, it is confirmed that Cd doping is effective for other p-type materials. These results strongly suggest that the effects of Cd doping on photocathodes should be carefully investigated when designing CdS/p-semiconductor heterojunction photoelectrodes. They also indicate that the Cd-doped layer has great potential to replace the CdS layer in future photoelectrode designs.

Suppressing Se Vacancies in Sb2Se3 Photocathode by In Situ Annealing with Moderate Se Vapor Pressure for Efficient Photoelectrochemical Water Splitting

Sb2Se3 emerges as a promising material for solar energy conversion devices. Unfortunately, the common deep-level defect VSe (selenium vacancy) in Sb2Se3 results in a low solar conversion efficiency. The post selenization process has been widely adopted for suppressing VSe. However, the effect of selenization on suppressing VSe is often compromised and even more VSe are induced due to defect-correlation. Herein, high-quality Sb2Se3 films are prepared using an unconventional selenization process, with precisely regulating in situ annealing Se vapor pressure. It is found that moderate Se vapor pressure annealing can efficiently suppress VSe by overcoming defect-correlation, as well as promotes grain growth and forms a better heterojunction band alignment. Consequently, the Sb2Se3 photocathode shows a high-level photocurrent of 19.5 mA cm-2 at 0 VRHE, an onset potential of 0.40 VRHE and a half-cell solar-to-hydrogen conversion efficiency of 1.9%, owing to the inhibited charge recombination, excellent charge transport and interface charge extraction. This work provides a significant insight to suppress deep-level defect VSe by adjusting Se vapor pressure for efficient Sb2Se3 photocathode.

Dual back interface engineering optimized charge carrier dynamics in Sb2(S,Se)3 photocathodes for efficient solar hydrogen production

Antimony sulfoselenide (Sb2(S,Se)3) is a promising sunlight absorber material for solar energy conversion in photovoltaic (PV) cells and photoelectrochemical (PEC) photoelectrodes due to its excellent photoelectric properties. However, the obtained thin-film and back contact properties significantly influence the PEC performance of photocathodes, causing severe bulk recombination, carrier transport loss, and deteriorating half-cell solar-to-hydrogen (HC-STH) efficiency. This study introduces an intriguing dual back interface engineering strategy for Sb2(S,Se)3 photocathodes by incorporating an intermediate MoO2 layer and a secondary carrier transport channel of Au to strengthen charge carrier dynamics. The synergistic assembly of these dual back interface layers improves the growth kinetics and achieves the optimal orientation of Sb2(S,Se)3 thin films by increasing substrate wettability. Moreover, by shortening the back contact barrier height and passivating defect-assisted recombinations, these dual back underlayers simultaneously enhance carrier transport and separation efficiencies. As a result, the photocurrent density of the champion Sb2(S,Se)3 photocathode increases from 5.89 to 32.60 mA cm-2, and the HC-STH conversion efficiency improves significantly from 0.30% to 3.58%, representing the highest value for Sb2(S,Se)3-based photocathodes. This work highlights the effectiveness of dual back interface engineering in promoting the PEC performance of chalcogenide photocathodes for solar hydrogen evolution applications.

Enhanced Charge-Carrier Dynamics and Efficient Photoelectrochemical Nitrate-to-Ammonia Conversion on Antimony Sulfide-Based Photocathodes

The photoelectrochemical reduction of nitrate to ammonia (PEC NO3RR) has emerged as a promising pathway for facilitating the natural nitrogen cycle. The PEC NO3RR can lower the reduction potential needed for ammonia synthesis through photogenerated voltage, showcasing the significant potential for merging abundant solar energy with sustainable nitrogen fixation. However, it is influenced by the selective photocathodes with poor carrier kinetics, low catalytic selectivity, and ammonia yields. There are few reports on suitable photoelectrodes owning efficient charge transport on PEC NO3RR at low overpotentials. Herein, we rationally constructed the CuSn alloy co-catalysts on the antimony sulfides with a highly selective PEC ammonia and an ultra-low onset potential (0.62 VRHE). CuSn/TiO2/Sb2S3 photoelectrodes achieved an ammonia faradic efficiency of 97.82 % at a low applied potential of 0.4 VRHE, and an ammonia yield of 16.96 μmol h-1 cm-2 at 0 VRHE under one sun illumination. Dynamics experiments and theoretical calculations have demonstrated that CuSn/TiO2/Sb2S3 has an enhanced charge separation and transfer efficiency, facilitating photogenerated electrons to participate in PEC NO3RR quickly. Meanwhile, moderate NO2* adsorption on this photocathode optimizes the catalytic activity and increases the NH4 + yield. This work opens an avenue for designing sulfide-based photocathodes for the efficient route of solar-to-ammonia conversion.

Operation of Amorphous TiO2-Protected Photocathodes Described with the Maxwell Equivalent Circuit

The use of amorphous TiO2 (a-TiO2), deposited by atomic layer deposition, is a common strategy to protect semiconductors from degradation when used in water-splitting photoelectrochemical (PEC) cells. Electrochemical impedance spectroscopy (EIS) is a suitable technique to study these PEC cells because it is capable of deconvoluting multiple processes occurring during operation, therefore providing information about mechanisms leading to the overall device performance. When biased under hydrogen evolution conditions, EIS shows that two simultaneous processes occur in a-TiO2-protected photocathodes, which introduces an ambiguity in choosing the correct equivalent circuit to describe the operating device. In this report, a model p-Si|a-TiO2|Pt photocathode system is used to show that the Maxwell circuit best describes the operating mechanism, as opposed to the more commonly used Voight and nested circuits. This indicates that, under hydrogen evolution conditions, both faradaic and nonfaradaic processes are occurring. Whereas the faradaic process corresponds to the hydrogen evolution reaction itself, the nonfaradaic process is traced to the p-Si|a-TiO2 interface.

Recent Advances in Antimony Selenide Photodetectors

Photodetectors (PDs) rapidly capture optical signals and convert them into electrical signals, making them indispensable in a variety of applications including imaging, optical communication, remote sensing, and biological detection. Recently, antimony selenide (Sb2Se3) has achieved remarkable progress due to its earth-abundant, low toxicity, low price, suitable bandgap width, high absorption coefficient, and unique structural characteristics. Sb2Se3 has been extensively studied in solar cells, but there's a lack of timely updates in the field of PDs. A literature review based on Sb2Se3 PDs is urgently warranted. This review aims to provide a concise understanding of the latest progress in Sb2Se3 PDs, with a focus on the basic characteristics and the performance optimization for Sb2Se3 photoconductive-type and photodiode-type detectors, including nanostructure regulation, process optimization, and stability improvement of flexible devices. Furthermore, the application progresses of Sb2Se3 PDs in heart rate monitoring, and monolithic-integrated matrix images are introduced. Finally, this review presents various strategies with potential and feasibility to address challenges for the rapid development and commercial application of Sb2Se3 PDs.

Substrate Morphology Directs (001) Sb2Se3 Thin Film Growth by Crystallographic Orientation Filtering

Antimony chalcogenide, Sb2X3 (X = S, Se), applications greatly benefit from efficient charge transport along covalently bonded (001) oriented (Sb4X6)n ribbons, making thin film orientation control highly desirable - although particularly hard to achieve experimentally. Here, it is shown for the first time that substrate nanostructure plays a key role in driving the growth of (001) oriented antimony chalcogenide thin films. Vapor Transport Deposition of Sb2Se3 thin films is conducted on ZnO substrates whose morphology is tuned between highly nanostructured and flat. The extent of Sb2Se3 (001) orientation is directly correlated to the degree of substrate nanostructure. These data showcase that nanostructuring a substrate is an effective tool to control the orientation and morphology of Sb2Se3 films. The optimized samples demonstrate high (001) crystallographic orientation. A growth mechanism for these films is proposed, wherein the substrate physically restricts the development of undesirable crystallographic orientations. It is shown that the surface chemistry of the nanostructured substrates can be altered and still drive the growth of (001) Sb2Se3 thin films - not limiting this phenomenon to a particular substrate type. Insights from this work are expected to guide the rational design of Sb2X3 thin film devices and other low-dimensional crystal-structured materials wherein performance is intrinsically linked to morphology and orientation.

AlGaAs as an Alternative Solar Water Splitting Material: Insights into Performance, Stability, and Future Directions

This study offers an in-depth examination of aluminum gallium arsenide (AlGaAs) as a high-performance and durable material for photoelectrochemical water splitting, a key method of cost-effective renewable hydrogen production. Purpose-designed pin-AlGaAs photocathodes are demonstrated to yield a remarkable photocurrent density of over 15 mA/cm2 and an impressive onset potential of 1.11 V vs RHE. These results significantly outperform those achieved with other materials, marking a considerable advancement in the field. Moreover, this work addresses the long-standing issue of AlGaAs corrosion in an aqueous electrolyte. An innovative approach using a 60 nm TiO2 protection layer is introduced, providing substantial corrosion resistance in acidic environments and thereby enhancing material durability. This research also provides valuable insights into the role of passivation layers on charge transfer. It was found that an n-GaAs passivation layer further enhances the onset potential, whereas an n-InGaP layer contributes to a decline in the overall performance. These findings pave the way for new applications of AlGaAs in solar water splitting technology, offering a promising pathway toward the development of efficient AlGaAs/Si tandem water splitting devices.

Direct Anchoring of Molybdenum Sulfide Molecular Catalysts on Antimony Selenide Photocathodes for Solar Hydrogen Production

Molybdenum sulfide serves as an effective nonprecious metal catalyst for hydrogen evolution, primarily active at edge sites with unsaturated molybdenum sites or terminal disulfides. To improve the activity at a low loading density, two molybdenum sulfide clusters, [Mo3S4]4+ and [Mo3S13]2-, were investigated. The Mo3S x molecular catalysts were heterogenized on Sb2Se3 with a simple soaking treatment, resulting in a thin catalyst layer of only a few nanometers that gave up to 20 mA cm-2 under one sun illumination. Both [Mo3S4]4+ and [Mo3S13]2- exhibit catalytic activities on Sb2Se3, with [Mo3S13]2- emerging as the superior catalyst, demonstrating enhanced photovoltage and an average faradaic efficiency of 100% for hydrogen evolution. This superiority is attributed to the effective loading and higher catalytic activity of [Mo3S13]2- on the Sb2Se3 surface, validated by X-ray photoelectron and Raman spectroscopy.

Designing Atomic Interface in Sb2S3/CdS Heterojunction for Efficient Solar Water Splitting

In the emerging Sb2S3-based solar energy conversion devices, a CdS buffer layer prepared by chemical bath deposition is commonly used to improve the separation of photogenerated electron-hole pairs. However, the cation diffusion at the Sb2S3/CdS interface induces detrimental defects but is often overlooked. Designing a stable interface in the Sb2S3/CdS heterojunction is essential to achieve high solar energy conversion efficiency. As a proof of concept, this study reports that the modification of the Sb2S3/CdS heterojunction with an ultrathin Al2O3 interlayer effectively suppresses the interfacial defects by preventing the diffusion of Cd2+ cations into the Sb2S3 layer. As a result, a water-splitting photocathode based on Ag:Sb2S3/Al2O3/CdS heterojunction achieves a significantly improved half-cell solar-to-hydrogen efficiency of 2.78% in a neutral electrolyte, as compared to 1.66% for the control Ag:Sb2S3/CdS device. This work demonstrates the importance of designing atomic interfaces and may provide a guideline for the fabrication of high-performance stibnite-type semiconductor-based solar energy conversion devices.

One-Step Hydrothermal Synthesis of Sn-Doped Sb2Se3 for Solar Hydrogen Production

Antimony selenide (Sb2Se3) has recently been intensively investigated and has achieved significant advancement in photoelectrochemical (PEC) water splitting. In this work, a facile one-step hydrothermal method for the preparation of Sn-doped Sb2Se3 photocathodes with improved PEC performance was investigated. We present an in-depth study of the performance enhancement in Sn-doped Sb2Se3 photocathodes using capacitance-voltage (CV), drive-level capacitance profiling (DLCP), and electrochemical impedance spectroscopy (EIS) techniques. The incorporation of Sn2+ into the Sb2Se3 results in increased carrier density, reduced surface defects, and improved charge separation, thereby leading to improved PEC performance. With a thin Sb2Se3 absorber layer (270 nm thickness), the Sn-doped Sb2Se3 photocathode exhibits an improved photocurrent density of 17.1 mA cm-2 at 0 V versus RHE (V RHE) compared to that of the undoped Sb2Se3 photocathode (14.4 mA cm-2). This work not only highlights the positive influence of Sn doping on Sb2Se3 photocathodes but also showcases a one-step method to synthesize doped Sb2Se3 with improved optoelectronic properties.

Solar-driven highly selective conversion of glycerol to dihydroxyacetone using surface atom engineered BiVO4 photoanodes

Dihydroxyacetone is the most desired product in glycerol oxidation reaction because of its highest added value and large market demand among all possible oxidation products. However, selectively oxidative secondary hydroxyl groups of glycerol for highly efficient dihydroxyacetone production still poses a challenge. In this study, we engineer the surface of BiVO4 by introducing bismuth-rich domains and oxygen vacancies (Bi-rich BiVO4-x) to systematically modulate the surface adsorption of secondary hydroxyl groups and enhance photo-induced charge separation for photoelectrochemical glycerol oxidation into dihydroxyacetone conversion. As a result, the Bi-rich BiVO4-x increases the glycerol oxidation photocurrent density of BiVO4 from 1.42 to 4.26 mA cm-2 at 1.23 V vs. reversible hydrogen electrode under AM 1.5 G illumination, as well as the dihydroxyacetone selectivity from 54.0% to 80.3%, finally achieving a dihydroxyacetone production rate of 361.9 mmol m-2 h-1 that outperforms all reported values. The surface atom customization opens a way to regulate the solar-driven organic transformation pathway toward a carbon chain-balanced product.

In-Sb Covalent Bonds over Sb2Se3/In2Se3 Heterojunction for Enhanced Photoelectrochemical Water Splitting

Antimony selenide is a promising P-type photocatalyst, but it has a large number of deep energy level defects, leading to severe carrier recombination. The construction of a heterojunction is a common way to resolve this problem. However, the conventional heterojunction system inevitably introduces interface defects. Herein, we employ in situ synthesis to epitaxially grow In2Se3 nanosheets on Sb2Se3 nanorods and form In-Sb covalent interfacial bonds. This petal-shaped heterostructure reduced interface defects and enhanced the efficiency of carrier separation and transport. In this work, the photocurrent density in the proposed Sb2Se3/In2Se3 photocathode is 0.485 mA cm-2 at 0 VRHE, which is 30 times higher than that of pristine Sb2Se3 and it has prominent long-term stability for 24 h without obvious decay. The results reveal that the synergy of the bidirectional built-in electric field constructed between In2Se3 and Sb2Se3 and the solid In-Sb interfacial bonds together build a high-efficiency transport channel for the photogenerated carriers that display enhanced photoelectrochemical (PEC) water-splitting performance. This work provides efficient guidance for reducing interface defects via the in situ synthesis and construction of interfacial bonds.

Gamma-irradiated stibnite thin films set a remarkable benchmark performance for photoelectrochemical water splitting

The study sets out to show the positive impact of sulfur vacancy engineering on the structural, morphological, optical, electrical, and photoelectrochemical (PEC) properties of Sb2S3 films synthesized using the spin coating technique. The produced films were exposed to γ-irradiation with different doses from 0 to 20 kGy. We have demonstrated the formation of sulfur vacancies and loss of oxygen content in the irradiated samples. XRD measurements revealed that all films exhibit a polycrystalline structure, and the crystallite size increases with the rising radiation dose, reaching the highest value of 87.4 nm measured for the Sb2S3 film irradiated with 15 kGy. The surface roughness of the irradiated samples increases with increasing γ-irradiation dose. The increase in surface roughness not only raises the active sites but enhances the conductivity of the Sb2S3 material as well. The wettability properties of the irradiated films were affected by γ-irradiation doses and the sample irradiated with 15 kGy exhibited the lowest hydrophobicity compared to others. The Hall measurements reveal that irradiated samples exhibit p-type semiconductor behavior. The optical band gap decreased progressively from 1.78 eV to 1.60 eV up to the irradiation dose of 15 kGy and slightly increased thereafter. The irradiated sample with 15 kGy showed a maximum photocurrent density of ca. 1.62 mA cm-2 at 0 V vs. reverse hydrogen electrode (RHE) under AM 1.5 G illumination with applied bias photon-to-current efficiency (ABPE) of 0.82% at 0.47 V vs. RHE, suggesting superior PEC water splitting performance compared to other samples. At 0 V vs. RHE and 648 nm, the incident photon current efficiency (IPCE) and absorbed photon current efficiency (APCE) of the photocathode irradiated with 15 kGy are significantly higher than those of the other photocathodes with values of 9.35% and 14.47%, respectively. Finally, Mott-Schottky measurement was also performed on all photocathodes to estimate their acceptor density and flat band potential.

Enhanced Charge Carrier Dynamics on Sb2 Se3 Photocathodes for Efficient Photoelectrochemical Nitrate Reduction to Ammonia

Ammonia (NH3 ) is recognized as a transportable carrier for renewable energy fuels. Photoelectrochemical nitrate reduction reaction (PEC NO3 RR) offers a sustainable solution for nitrate-rich wastewater treatment by directly converting solar energy to ammonia. In this study, we demonstrate the highly selective PEC ammonia production from NO3 RR by constructing a CoCu/TiO2 /Sb2 Se3 photocathode. The constructed CoCu/TiO2 /Sb2 Se3 photocathode achieves an ammonia Faraday efficiency (FE) of 88.01 % at -0.2 VRHE and an ammonia yield as high as 15.91 μmol h-1  cm-2 at -0.3 VRHE with an excellent onset potential of 0.43 VRHE . Dynamics experiments and theoretical calculations have demonstrated that the CoCu/TiO2 /Sb2 Se3 photocathode possesses high light absorption capacity, excellent carrier transfer capability, and high charge separation and transfer efficiencies. The photocathode can effectively adsorb the reactant NO3 - and intermediate, and the CoCu co-catalyst increases the maximum Gibbs free energy difference between NO3 RR and HER. Meanwhile, the Co species enhances the spin density of Cu, and increases the density of states near the Fermi level in pdos, which results in a high PEC NO3 RR activity on CoCu/TiO2 /Sb2 Se3 . This work provides a new avenue for the feasibility of efficient PEC ammonia synthesis from nitrate-rich wastewater.

Comparing the net-energy balance of standalone photovoltaic-coupled electrolysis and photoelectrochemical hydrogen production

Photovoltaic-coupled electrolysis (PV-E) and photoelectrochemical (PEC) water splitting are two options for storing solar energy as hydrogen. Understanding the requirements for achieving a positive energy balance over the lifetime of facilities using these technologies is important for ensuring sustainability. While neither technology has yet reached full commercialisation, they are also at very different technology readiness levels and scales of development. Here, we model the energy balance of standalone large-scale facilities to evaluate their energy return on energy invested (ERoEI) over time and energy payback time (EPBT). We find that for average input parameters based on present commercialised modules, a PV-E facility shows an EPBT of 6.2 years and ERoEI after 20 years of 2.1, which rises to approximately 3.7 with an EPBT of 2.7 years for favourable parameters using the best metrics amongst large-scale modules. The energy balance of PV-E facilities is influenced most strongly by the upfront embodied energy costs of the photovoltaic component. In contrast, the simulated ERoEI for a PEC facility made with earth abundant materials only peaks at 0.42 after 11 years and about 0.71 after 20 years for facilities with higher-performance active materials. Doubling the conversion efficiency to 10% and halving the degradation rate to 2% for a 10-year device lifetime can allow PEC facilities to achieve an ERoEI after 20 years of 2.1 for optimistic future parameters. We also estimate that recycling the materials used in hydrogen production technologies improves the energy balance by 28% and 14% for favourable-case PV-E and PEC water splitting facilities, respectively.

Polymeric viologen-based electron transfer mediator for improving the photoelectrochemical water splitting on Sb2Se3 photocathode

The photogenerated charge carrier separation and transportation of inside photocathodes can greatly influence the performance of photoelectrochemical (PEC) H2 production devices. Coupling TiO2 with p-type semiconductors to construct heterojunction structures is one of the most widely used strategies to facilitate charge separation and transportation. However, the band position of TiO2 could not perfectly match with all p-type semiconductors. Here, taking antimony selenide (Sb2Se3) as an example, a rational strategy was developed by introducing a viologen electron transfer mediator (ETM) containing polymeric film (poly-1,1'-dially-[4,4'-bipyridine]-1,1'-diium, denoted as PV2+) at the interface between Sb2Se3 and TiO2 to regulate the energy band alignment, which could inhibit the recombination of photogenerated charge carriers of interfaces. With Pt as a catalyst, the constructed Sb2Se3/PV2+/TiO2/Pt photocathode showed a superior PEC hydrogen generation activity with a photocurrent density of -18.6 mA cm-2 vs. a reversible hydrogen electrode (RHE) and a half-cell solar-to-hydrogen efficiency (HC-STH) of 1.54% at 0.17 V vs. RHE, which was much better than that of the related Sb2Se3/TiO2/Pt photocathode without PV2+ (-9.8 mA cm-2, 0.51% at 0.10 V vs. RHE).

Suppressing Buried Interface Nonradiative Recombination Losses Toward High-Efficiency Antimony Triselenide Solar Cells

Antimony triselenide (Sb2 Se3 ) has possessed excellent optoelectronic properties and has gained interest as a light-harvesting material for photovoltaic technology over the past several years. However, the severe interfacial and bulk recombination obviously contribute to significant carrier transport loss thus leading to the deterioration of power conversion efficiency (PCE). In this work, buried interface and heterojunction engineering are synergistically employed to regulate the film growth kinetic and optimize the band alignment. Through this approach, the orientation of the precursor films is successfully controlled, promoting the preferred orientational growth of the (hk1) of the Sb2 Se3 films. Besides, interfacial trap-assisted nonradiative recombination loss and heterojunction band alignment are successfully minimized and optimized. As a result, the champion device presents a PCE of 9.24% with short-circuit density (JSC ) and fill factor (FF) of 29.47 mA cm-2 and 63.65%, respectively, representing the highest efficiency in sputtered-derived Sb2 Se3 solar cells. This work provides an insightful prescription for fabricating high-quality Sb2 Se3 thin film and enhancing the performance of Sb2 Se3 solar cells.

Solution-processed Sb2Se3 photocathodes under Se-rich conditions and their photoelectrochemical properties

In this study, selenium (Se)-rich antimony selenide (Sb2Se3) films were fabricated by applying a solution process with the solvents ethylenediamine and 2-mercaptoethanol to optimize the photoelectrochemical (PEC) performance of the Sb2Se3 photocathode. Various antimony (Sb)-Se precursor solutions with different molar ratios of Sb and Se (Sb : Se = 1 : 1.5, 1 : 3, 1 : 4.5, 1 : 7.5, and 1 : 9) were prepared to attain Se-rich fabrication conditions. As a result, the Se-rich Sb2Se3 films fabricated using the Sb-Se precursor solution with a molar ratio of Sb : Se = 1 : 7.5 exhibited an improved PEC performance, compared to the stoichiometric Sb2Se3 film. The charge transport was improved by the abundant Se element and thin selenium oxide (Se2O3) layer in the Se-rich Sb2Se3 film, resulting in a decrease in Se vacancies and substitutional defects. Moreover, the light utilization in the long wavelength region above 800 nm was enhanced by the light-trapping effect because of the nanowire structure in the Se-rich Sb2Se3 film. Hence, the optimal Se-rich Sb2Se3 photocathodes showed an improved photocurrent density of -0.24 mA cm-2 at the hydrogen evolution reaction potential that was three times higher than that of the stoichiometric Sb2Se3 photocathodes (-0.08 mA cm-2).

Electron Transport Layer Engineering Induced Carrier Dynamics Optimization for Efficient Cd-Free Sb2 Se3 Thin-Film Solar Cells

Antimony selenide (Sb2 Se3 ) is a highly promising photovoltaic material thanks to its outstanding optoelectronic properties, as well as its cost-effective and eco-friendly merits. However, toxic CdS is widely used as an electron transport layer (ETL) in efficient Sb2 Se3 solar cells, which largely limit their development toward market commercialization. Herein, an effective green Cd-free ETL of SnOx is introduced and deposited by atomic layer deposition method. Additionally, an important post-annealing treatment is designed to further optimize the functional layers and the heterojunction interface properties. Such engineering strategy can optimize SnOx ETL with higher nano-crystallinity, higher carrier density, and less defect groups, modify Sb2 Se3 /SnOx heterojunction with better interface performance and much desirable "spike-like" band alignment, and also improve the Sb2 Se3 light absorber layer quality with passivated bulk defects and prolonged carrier lifetime, and therefore to enhance carrier separation and transport while suppressing non-radiative recombination. Finally, the as-fabricated Cd-free Mo/Sb2 Se3 /SnOx /ITO/Ag thin-film solar cell exhibits a stimulating efficiency of 7.39%, contributing a record value for Cd-free substrate structured Sb2 Se3 solar cells reported to date. This work provides a viable strategy for developing and broadening practical applications of environmental-friendly Sb2 Se3 photovoltaic devices.

Prompt Hole Extraction Suppresses V5+ Dissolution and Sustains Large-Area BiVO4 Photoanodes for Over 2100 h Water Oxidation

Nanostructured bismuth vanadate (BiVO4) is at the forefront of emerging photoanodes in photoelectrochemical tandem devices for solar water splitting owing to the suitable band edge position and efficient charge separation capability. However, the (photo)chemical corrosion involving V5+ dissolution limits the long-term stability of BiVO4. Herein, guided by DFT calculations, we introduce an ALD-derived NiOx catalyst layer on BiVO4 to stabilize the surface Bi-O bonds, facilitate hole extraction, and thus suppress the V5+ dissolution. At the same time, the ALD NiOx catalyst layer could efficiently suppress the surface recombination and accelerate the surface OER kinetics, boosting the half-cell applied bias photon-to-current efficiency of BiVO4 to 2.05%, as well as a fill factor of 47.1%. By adding trace NaVO3 to the electrolyte, the NiOx/BiVO4 photoanode with an illumination area of 10.5 cm2 shows a record operational stability of more than 2100 h.

The facile synthesis of and light-driven water splitting on a hetero-metallic bismuth oxide catalyst

The process of water photo-electrolysis possesses the capability to generate sustainable and renewable hydrogen fuels, consequently addressing the challenge of the irregularity of solar energy. Thus, developing highly-efficient and low-cost electrocatalysts for the use in contemporary renewable energy devices is critical. Herein, we report the fabrication of a novel BaCeFex-yBixO6 nanocrystalline material through a one-step solvothermal route using a post-annealing process at 500 °C. The synthesized material was investigated for its light-induced electrochemical HER and OER activities in alkaline media and the results revealed that the as-prepared BaCeFex-yBixO6-500 °C exhibited an excellent OER activity with an overpotential of 100 mV to achieve a current density of 10 mA cm-2, thus outperforming the IrO2 electrocatalyst. Besides its excellent water oxidation performance, the catalyst also demonstrated an admirable HER activity comparable to that of the Pt/C catalyst, indicating that the higher temperature treatment plays a significant role in achieving the maximum performance of the developed electrocatalyst. This work provides insights into the enhancement of light-induced OER and HER activities of bismuth oxides for a wide range of catalytic applications.

Key Strategies on Cu2O Photocathodes toward Practical Photoelectrochemical Water Splitting

Cuprous oxide (Cu2O) has been intensively in the limelight as a promising photocathode material for photoelectrochemical (PEC) water splitting. The state-of-the-art Cu2O photocathode consists of a back contact layer for transporting the holes, an overlayer for accelerating charge separation, a protection layer for prohibiting the photocorrosion, and a hydrogen evolution reaction (HER) catalyst for reducing the overpotential of HER, as well as a Cu2O layer for absorbing sunlight. In this review, the fundamentals and recent research progress on these components of efficient and durable Cu2O photocathodes are analyzed in detail. Furthermore, key strategies on the development of Cu2O photocathodes for the practical PEC water-splitting system are suggested. It provides the specific guidelines on the future research direction for the practical application of a PEC water-splitting system based on Cu2O photocathodes.

Impedance spectroscopy of Sb2Se3 photovoltaics consisting of (Sb4Se6)n nanoribbons under light illumination

Sb2Se3, consisting of one-dimensional (Sb4Se6)n nanoribbons has drawn attention as an intriguing light absorber from the photovoltaics (PVs) research community. However, further research is required on the performance-limiting factors in Sb2Se3 PVs. In this study, we investigated the charge carrier behavior in Sb2Se3 PVs by impedance spectroscopy (IS) under light illumination. (Sb4Se6)n nanoribbons with two different orientations were used to investigate the effect of crystal orientation on the device performance. Regardless of the (Sb4Se6)n orientation, negative capacitance was observed at forward bias, representing a recombination pathway at the TiO2/Sb2Se3 interface. A comparison of the recombination resistances and lifetimes of two different Sb2Se3 PVs showed that a better interface could be formed by placing the (Sb4Se6)n ribbons parallel to the TiO2 layer. Based on these observations, an ideal structure of the Sb2Se3/TiO2 interface is proposed, which will enhance the performance of Sb2Se3 PVs toward its theoretical limit.

Organometal Halide Perovskite-Based Photoelectrochemical Module Systems for Scalable Unassisted Solar Water Splitting

Despite achievements in the remarkable photoelectrochemical (PEC) performance of photoelectrodes based on organometal halide perovskites (OHPs), the scaling up of small-scale OHP-based PEC systems to large-scale systems remains a great challenge for their practical application in solar water splitting. Significant resistive losses and intrinsic defects are major obstacles to the scaling up of OHP-based PEC systems, leading to the PEC performance degradation of large-scale OHP photoelectrodes. Herein, a scalable design of the OHP-based PEC systems by modularization of the optimized OHP photoelectrodes exhibiting a high solar-to-hydrogen conversion efficiency of 10.4% is suggested. As a proof-of-concept, the OHP-based PEC module achieves an optimal PEC performance by avoiding major obstacles in the scaling up of the OHP photoelectrodes. The constructed OHP module is composed of a total of 16 OHP photoelectrodes, and a photocurrent of 11.52 mA is achieved under natural sunlight without external bias. The successful operation of unassisted solar water splitting using the OHP module without external bias can provide insights into the design of scalable OHP-based PEC systems for future practical application and commercialization.

Tandem cells for unbiased photoelectrochemical water splitting

Hydrogen is an essential energy carrier which will address the challenges posed by the energy crisis and climate change. Photoelectrochemical water splitting (PEC) is an important method for producing solar-powered hydrogen. The PEC tandem configuration harnesses sunlight as the exclusive energy source to drive both the hydrogen (HER) and oxygen evolution reactions (OER), simultaneously. Therefore, PEC tandem cells have been developed and gained tremendous interest in recent decades. This review describes the current status of the development of tandem cells for unbiased photoelectrochemical water splitting. The basic principles and prerequisites for constructing PEC tandem cells are introduced first. We then review various single photoelectrodes for use in water reduction or oxidation, and highlight the current state-of-the-art discoveries. Second, a close look into recent developments of PEC tandem cells in water splitting is provided. Finally, a perspective on the key challenges and prospects for the development of tandem cells for unbiased PEC water splitting are given.

Tex Se1-x Photodiode Shortwave Infrared Detection and Imaging

Short-wave infrared detectors are increasingly important in the fields of autonomous driving, food safety, disease diagnosis, and scientific research. However, mature short-wave infrared cameras such as InGaAs have the disadvantage of complex heterogeneous integration with complementary metal-oxide-semiconductor (CMOS) readout circuits, leading to high cost and low imaging resolution. Herein, a low-cost, high-performance, and high-stability Te_x Se_{1- x} short-wave infrared photodiode detector is reported. The Te_x Se_{1- x} thin film is fabricated through CMOS-compatible low-temperature evaporation and post-annealing process, showcasing the potential of direct integration on the readout circuit. The device demonstrates a broad-spectrum response of 300-1600 nm, a room-temperature specific detectivity of 1.0 × 10¹⁰ Jones, a -3 dB bandwidth up to 116 kHz, and a linear dynamic range of over 55 dB, achieving the fastest response among Te-based photodiode devices and a dark current density 7 orders of magnitude smaller than Te-based photoconductive and field-effect transistor devices. With a simple Si₃ N₄ packaging, the detector shows high electric stability and thermal stability, meeting the requirements for vehicular applications. Based on the optimized Te_x Se_{1- x} photodiode detector, the applications in material identification and masking imaging is demonstrated. This work paves a new way for CMOS-compatible infrared imaging chips.

Stability of Photocathodes: A Review on Principles, Design, and Strategies

Photoelectrochemical devices based on semiconductor photoelectrode can directly convert and store solar energy into chemical fuels. Although the efficient photoelectrodes with commercially valuable solar-to-fuel energy conversion efficiency have been reported over past decades, one of the most enormous challenges is the stability of the photoelectrode due to corrosion during operation. Thus, it is of paramount importance for developing a stable photoelectrode to deploy solar-fuel production. This Review commences with a fundamental understanding of thermodynamics for photoelectrochemical reactions and the fundamentals of photocathodes. Then, the commercial application of photoelectrochemical technology is prospected. We specifically focus on recent strategies for designing photocathodes with long-term stability, including energy band alignment, hole transport/storage/blocking layer, spatial decoupling, grafting molecular catalysts, protective/passivation layer, surface element reconstruction, and solvent effects. Based on the insights gained from these effective strategies, we propose an outlook of key aspects that address the challenges for development of stable photoelectrodes in future work.

Vertically Aligned One-Dimensional Crystal-Structured Sb2Se3 for High-Efficiency Flexible Solar Cells via Regulating Selenization Kinetics

Recently, antimony selenide (Sb₂Se₃) has exhibited an exciting potential for flexible photoelectric applications due to its unique one-dimensional (1D) chain-type crystal structure, low-cost constituents, and superior optoelectronic properties. The 1D structure endows Sb₂Se₃ with a strong anisotropy in carrier transport and a lasting mechanical deformation tolerance. The control of the crystalline orientation of the Sb₂Se₃ film is an essential requirement for its device performance optimization. However, the current state-of-the-art Sb₂Se₃ devices suffer from unsatisfactory orientation control, especially for the (001) orientation, in which the chains stand vertically. Herein, we achieved an unprecedented control of the (001) orientation for the growth of the Sb₂Se₃ film on a flexible Mo-coated mica substrate by balancing the collision rate and kinetic energy of Se vapor particles with the surface of Sb film by regulating the selenization kinetics. Based on this (001)-oriented Sb₂Se₃ film, a high efficiency of 8.42% with a record open-circuit voltage (V_OC) of 0.47 V is obtained for flexible Sb₂Se₃ solar cells. The vertical van der Waals gaps in the (001) orientation provide favorable diffusion paths for Se atoms, which results in a Se-rich state at the bottom of the Sb₂Se₃ film and promotes the in situ formation of the MoSe₂ interlayer between Mo and Sb₂Se₃. These phenomena contribute to a back-surface field enhanced absorber layer and a quasi-Ohmic back contact, improving the device's V_OC and the collection of carriers. This method provides an effective strategy for the orientation control of 1D materials for efficient photoelectric devices.

Rapid Synthesis of Ultrathin Ni:FeOOH with In Situ-Induced Oxygen Vacancies for Enhanced Water Oxidation Activity and Stability of BiVO4 Photoanodes

The coupling of oxygen evolution reaction (OER) catalysts with photoanodes is a promising strategy for enhancing the photoelectrochemical (PEC) performance by passivating photoanode's surface defect states and facilitating charge transfer at the photoanode/electrolyte interface. However, a serious interface recombination issue caused by poor interface and OER catalysts coating quality often limits further performance improvement of photoanodes. Herein, a rapid Fenton-like reaction method is demonstrated to produce ultrathin amorphous Ni:FeOOH catalysts with in situ-induced oxygen vacancies (Vo) to improve the water oxidation activity and stability of BiVO₄ photoanodes. The combined physical characterizations, PEC studies, and density functional theory calculations revealed that the reductive environment in a Fenton-like reaction in situ produces abundant Vo in Ni:FeOOH catalysts, which significantly improves charge separation and charge transfer efficiency of BiVO₄ while also offering abundant active sites and a reduced energy barrier for OER. As a result, Ni:FeOOH-Vo catalysts yielded a more than 2-fold increased photocurrent density in the BiVO₄ photoanode (from 1.54 to 4.15 mA cm^-2 at 1.23 V_RHE), accompanied by high stability for 5 h. This work not only highlights the significance of abundant Vo in catalysts but also provides new insights into the rational design and fabrication of efficient and stable solar water-splitting systems.

Solution phase treatments of Sb2Se3 heterojunction photocathodes for improved water splitting performance

Antimony selenide (Sb₂Se₃) is an auspicious material for solar energy conversion that has seen rapid improvement over the past ten years, but the photovoltage deficit remains a challenge. Here, simple and low-temperature treatments of the p-n heterojunction interface of Sb₂Se₃/TiO₂-based photocathodes for photoelectrochemical water splitting were explored to address this challenge. The FTO/Ti/Au/Sb₂Se₃ (substrate configuration) stack was treated with (NH₄)₂S as an etching solution, followed by CuCl₂ treatment prior to deposition of the TiO₂ by atomic layer deposition. The different treatments show different mechanisms of action compared to similar reported treatments of the back Au/Sb₂Se₃ interface in superstrate configuration solar cells. These treatments collectively increased the onset potential from 0.14 V to 0.28 V vs. reversible hydrogen electrode (RHE) and the photocurrent from 13 mA cm^-2 to 18 mA cm^-2 at 0 V vs. RHE as compared to the untreated Sb₂Se₃ films. From SEM and XPS studies, it is clear that the etching treatment induces a morphological change and removes the surface Sb₂O₃ layer, which eliminates the Fermi-level pinning that the oxide layer generates. CuCl₂ further enhances the performance due to the passivation of the surface defects, as supported by density functional theory molecular dynamics (DFT-MD) calculations, improving charge separation at the interface. The simple and low-cost semiconductor synthesis method combined with these facile, low-temperature treatments further increases the practical potential of Sb₂Se₃ for large-scale water splitting.

An integrated n-Si/BiVO4 photoelectrode with an interfacial bi-layer for unassisted solar water splitting

Integrated n-Si/BiVO4 is one of the most promising candidates for unbiased photoelectrochemical water splitting. However, a direct connection between n-Si and BiVO4 will not attain overall water splitting due to the small band offset as well as the interfacial defects at the n-Si/BiVO4 interface that severely impede carrier separation and transport, limiting the photovoltage generation. This paper describes the design and fabrication of an integrated n-Si/BiVO4 device with enhanced photovoltage extracted from the interfacial bi-layer for unassisted water splitting. An Al2O3/indium tin oxide (ITO) interfacial bi-layer was inserted at the n-Si/BiVO4 interface, which promotes the interfacial carrier transport by enlarging the band offset while healing interfacial defects. When coupled to a separate cathode for hydrogen evolution, spontaneous water splitting could be realized with this n-Si/Al2O3/ITO/BiVO4 tandem anode, with an average solar-to-hydrogen (STH) efficiency of 0.62% for over 1000 hours.

Bi2 S3 -Cu3 BiS3 Mixed Phase Interlayer for High-Performance Cu3 BiS3 -Photocathode for 2.33% Unassisted Solar Water Splitting Efficiency

To realize practical solar hydrogen production, a low-cost photocathode with high photocurrent density and onset potential should be developed. Herein, an efficient and stable overall photoelectrochemical tandem cell is developed with a Cu3 BiS3 -based photocathode. By exploiting the crystallographic similarities between Bi2 S3 and Cu3 BiS3 , a one-step solution process with two sulfur sources is used to prepare the Bi2 S3 -Cu3 BiS3 blended interlayer. The elongated Bi2 S3 -Cu3 BiS3 mixed-phase 1D nanorods atop a planar Cu3 BiS3 film enable a high photocurrent density of 7.8 mA cm-2 at 0 V versus the reversible hydrogen electrode, with an onset potential of 0.9 VRHE . The increased performance over the single-phase Cu3 BiS3 thin-film photocathode is attributed to the enhanced light scattering and charge collection through the unique 1D nanostructure, improved electrical conductivity, and better band alignment with the n-type CdS layer. A solar-to-hydrogen efficiency of 2.33% is achieved under unassisted conditions with a state-of-the-art Mo:BiVO4 photoanode, with excellent stability exceeding 21 h.

Process Accumulated 8% Efficient Cu2 ZnSnS4 -BiVO4 Tandem Cell for Solar Hydrogen Evolution with the Dynamic Balance of Solar Energy Storage and Conversion

A process accumulated record solar to hydrogen (STH) conversion efficiency of 8% is achieved on the Cu2 ZnSnS4 -BiVO4 tandem cell by the synergistic coupling effect of solar thermal and photoelectrochemical (PEC) water splitting with the dynamic balance of solar energy storage and conversion of the greenhouse system. This is the first report of a Cu2 ZnSnS4 -BiVO4 tandem cell with a high unbiased STH efficiency of over 8% for solar water splitting due to the greenhouse device system. The greenhouse acts as a solar thermal energy storage cell, which absorbs infrared solar light and storage as thermal energy with the solar light illumination time, while thermoelectric device (TD) converts thermal energy into electric power, electric power is also recycled and added onto Cu2 ZnSnS4 -BiVO4 tandem cell for enhanced overall water splitting. Finally, the solar water splitting properties of the TD-Cu2 ZnSnS4 -BiVO4 integrated tandem cell in pure natural seawater are demonstrated, and a champion STH efficiency of 2.46% is presented, while a large area (25 cm2 ) TD-Cu2 ZnSnS4 -BiVO4 integrated tandem device with superior long-term stability is investigated for 1 week, which provides new insight into photoelectrochemical solar water splitting devices.

Hole Storage Interfacial Regulation of Sb2Se3 Photocathode with Significantly Enhanced Photoelectrochemical Performance

Although interfacial engineering materials for antimony selenide (Sb₂Se₃) photocathodes have been intensively studied, most of the previous research has focused on the development of photogenerated electron transfer promoters. In this work, Sb₂Se₃ photocathodes are innovatively modified by using ferrihydrite (Fh), which has been widely used as a hole storage layer in photoanodes. After modifying Fh, the photocurrent density of the Sb₂Se₃ photocathode was increased from -0.27 to -1.6 mA cm^-2 at 0 V_RHE with the onset potential positive shift about 150 mV, and an impressive injection efficiency of 83.84% was achieved. The major contribution of Fh to the photoelectrochemical (PEC) performance enhancement was demonstrated by various characterization studies. The results show that the enhancement performance of PEC is largely attributed to the capture of back-migrating holes by Fh, the reduction of interfacial charge transfer resistance, and the significant increase in electrochemical active surface area (ECSA). This work presents new insights into the application of hole storage layers in Sb₂Se₃-based photocathodes.

Ligand-Engineered Quantum Dots Decorated Heterojunction Photoelectrodes for Self-Biased Solar Water Splitting

A cost-effective and high-efficiency photoelectrochemical (PEC) water splitting system based on colloidal quantum dots (QDs) represents a potential solar-to-hydrogen (STH) conversion technology to achieve future carbon neutrality. Herein, a self-biased PEC cell consisting of BiVO₄ photoanode and Cu₂ O photocathode both decorated with Zn-doped CuInS₂ (ZCIS) QDs is successfully fabricated. The intrinsic charge dynamics of the photoelectrodes are efficiently optimized via rational engineering of the surface ligands capped on QDs with controllable chain lengths and binding affinities to the metal oxide electrodes. It is demonstrated that the short-chain monodentate 1-dodecanethiol ligands are beneficial to ZCIS QDs for suppressing charge recombination, which enables the construction of tight heterojunction with coupled metal oxide electrodes, leading to effective photo-induced charge transfer/injection for enhanced PEC performance. The QD decorated BiVO₄ and Cu₂ O photoelectrodes in pairs demonstrate a self-biased PEC water splitting process, delivering an STH efficiency of 0.65% with excellent stability under AM 1.5 G one-sun illumination. The results highlight the significance of synergistic ligand and heterojunction engineering to build highly efficient and robust QDs-based PEC devices for self-biased solar water splitting.

Solution-Mediated Inversion of SnSe to Sb2Se3 Thin-Films

New facile and controllable approaches to fabricating metal chalcogenide thin films with adjustable properties can significantly expand the scope of these materials in numerous optoelectronic and photovoltaic devices. Most traditional and especially wet-chemical synthetic pathways suffer from a sluggish ability to regulate the composition and have difficulty achieving the high-quality structural properties of the sought-after metal chalcogenides, especially at large 2D length scales. In this effort, and for the first time, we illustrated the fast and complete inversion of continuous SnSe thin-films to Sb₂Se₃ using a scalable top-down ion-exchange approach. Processing in dense solution systems yielded the formation of Sb₂Se₃ films with favorable structural characteristics, while oxide phases, which are typically present in most Sb₂Se₃ films regardless of the synthetic protocols used, were eliminated. Density functional theory (DFT) calculations performed on intermediate phases show strong relaxations of the atomic lattice due to the presence of substitutional and vacancy defects, which likely enhances the mobility of cationic species during cation exchange. Our concept can be applied to customize the properties of other metal chalcogenides or manufacture layered structures.

Sb2S3/Sb2Se3 heterojunction for high-performance photodetection and hydrogen production

Photoelectrochemical (PEC)-type devices provide promising ways for harvesting solar energy and converting it to electric and chemical energy with a low-cost and simple manufacturing process. However, the high light absorption, fast carrier separation, and low carrier recombination are still great challenges in reaching high performance for PEC devices. As emergent two-dimensional (2D) materials, Sb₂Se₃ and Sb₂S₃ exhibit desirable photoelectric properties due to the narrow bandgap, large optical absorption, and high carrier mobility. Herein, Sb₂S₃/Sb₂Se₃ heterojunction is synthesized by a two-step physical vapor deposition method. The type-II Sb₂S₃/Sb₂Se₃ heterojunction displays excellentphotoelectric properties such as a high photocurrent density (I_ph ∼ 162 µA cm^-2), a high photoresponsivity (R_ph ∼ 3700 µA W^-1), and a fast time response speed (rising time ∼ 2 ms and falling time ∼ 4.5 ms) even in harsh environment (H₂SO₄ electrolyte). Especially, the Sb₂S₃/Sb₂Se₃ shows an excellent self-powered photoresponse (I_ph ∼ 40 µA cm^-2, R_ph ∼ 850 µA W^-1). This increment is attributed to the improvement in light absorption, charge separation, and charge transfer efficiency. Taking these advantages, the Sb₂S₃/Sb₂Se₃ heterojunction also exhibits higher PEC water splitting synergically, which is approximately 3 times larger than that of Sb₂Se₃ and Sb₂S₃. These results pave the way for high-performance PEC devices by integrating 2D narrow bandgap semiconductors.

Polymer Photoelectrodes for Solar Fuel Production: Progress and Challenges

Converting solar energy to fuels has attracted substantial interest over the past decades because it has the potential to sustainably meet the increasing global energy demand. However, achieving this potential requires significant technological advances. Polymer photoelectrodes are composed of earth-abundant elements, e.g. carbon, nitrogen, oxygen, hydrogen, which promise to be more economically sustainable than their inorganic counterparts. Furthermore, the electronic structure of polymer photoelectrodes can be more easily tuned to fit the solar spectrum than inorganic counterparts, promising a feasible practical application. As a fast-moving area, in particular, over the past ten years, we have witnessed an explosion of reports on polymer materials, including photoelectrodes, cocatalysts, device architectures, and fundamental understanding experimentally and theoretically, all of which have been detailed in this review. Furthermore, the prospects of this field are discussed to highlight the future development of polymer photoelectrodes.

Epitaxial Grown Sb2Se3@Sb2S3 Core-Shell Nanorod Radial-Axial Hierarchical Heterostructure with Enhanced Photoelectrochemical Water Splitting Performance

Antimony selenide (Sb2Se3) as a light-harvesting material has gradually attracted the attention of researchers in the field of photoelectrocatalysis. Uniquely, the crystal structure consists of one-dimensional (Sb4Se6)n ribbons, with an efficient carrier transport along the ribbon [001] direction. Herein, a novel Sb2Se3@Sb2S3 core-shell nanorod radial-axial hierarchical heterostructure was successfully fabricated by epitaxial growth strategy. Taking advantage of the isomorphous and anisotropic binding modes of (Sb4S(e)6)n ribbons for Sb2Se3 and Sb2S3, the epitaxially grown core-shell heterostructure forms a van der Waals heterojunction across the radial direction and covalently bonded heterojunction along the axial direction. A photocurrent of 1.37 mA cm-2 was achieved at 0 V vs RHE for the hierarchical Sb2Se3@Sb2S3 nanorod photoelectrode with [101] preferred orientation, up to 40 times higher than for pure Sb2Se3. Moreover, the FeOOH was introduced as a cocatalyst. The photoelectrode decorated with FeOOH shows better stability with a H2 generation rate of 18.9 μmol cm-2 h-1 under neutral conditions. This study provides a new insight into the design of antimony chalcogenide heterostructure photoelectrodes for photoelectrochemical water splitting.