Microstructural origin of locally enhanced CO2 electroreduction activity on gold

Nitrogen imported in nickel clusters promotes carbon dioxide electrochemical reduction to carbon monoxide

The Ni-N coordination structure has been shown to be conducive to the electrochemical CO2 reduction reaction (CO2RR) to CO, and this process has been extensively validated. However, the impact of Ni-N coordination structures within Ni-based clusters on CO2RR has received relatively limited research attention to date. In this study, catalysts containing Ni single atoms and Nin clusters (Ni-N/Nin) were synthesised, and subsequently, Nin clusters were transformed into NinNx clusters (Ni-N/NinNx) through secondary nitridation. The experimental results, as illustrated by X-ray photoelectron spectra and X-ray absorption fine structure spectra, demonstrate that the Ni-N bond in Ni-N/NinNx increased and Ni-N-Ni bonds within atomic clusters were generated, thereby confirming the transformation from Nin clusters to NinNx clusters. Density functional theory calculations show that the NinNx clusters have a lower energy barrier for the *CO2- + H+ → *COOH step compared to Nin clusters, and promote the entire reaction. Furthermore, in-situ attenuated total reflection surface-enhanced infrared absorption spectroscopy (ATR-SEIRAS) and density functional theory (DFT) calculations collectively indicate that abundant Ni-N coordination structures in clusters effectively reduce the energy barrier of CO2 + e- → *CO2- and facilitate the activation of CO2 to *CO2- across a broader potential window. Ni-N/NinNx demonstrates high Faraday efficiency of CO (FECOmax = 98.6 % at -0.4 V vs. RHE), a wider potential window (-0.3 to -0.8 V vs. RHE, FECO > 90 %) and high CO partial current density (jCO > 100 mA cm-2). In comparison with Ni-N/Nin, the maximum CO partial current density of Ni-N/NinNx is enhanced by approximately 4.6 times. These findings offer valuable insights into the structure-activity relationship of Ni-based cluster catalysts and facilitate the development of more advanced atomically cluster catalysts.

Identical Grain Atomic Force Microscopy Elucidates Facet-Dependent Restructuring of Copper for CO2 Electroreduction

Studies on the catalyst restructuring during the electrochemical CO2 reduction reaction (eCO2RR) are limited and mostly focused on Cu (001) or (111) single crystals as model systems. A comprehensive overview of the dynamic restructuring of different Cu facets is lacking. Here, we first reveal the facet-dependent restructuring of polycrystalline Cu electrodes through electron backscatter diffraction (EBSD) and identical grain atomic force microscopy (AFM). This combined analysis provides new insights into the evolution of crystal domains (EBSD) and surface topography (AFM) at varying conditions (e.g., applied potential and oxidative-reductive pulses). The statistic slope distribution function was applied to study the restructuring asymmetry on five Cu facets (i.e., planar vs. atom stepped). We find that planar Cu (001) shows a square-shaped morphology after eCO2RR with 4-fold asymmetry restructuring behavior, while triangular features dominate on Cu (111), evidenced by surface changes with 3-fold asymmetry. 2-fold restructuring is observed for Cu (114), (212), and (124) with atom steps, resulting in forming elongated structures. Therefore, the surface restructuring is dominated by the asymmetry of its facet lattice structure (i.e., planar vs. atom-stepped). This work underscores the potential of combining techniques to elucidate the relationship between surface restructuring and crystal facets on different length scales.

MOF Derived Phosphide Nanocubes with Internal Heterojunction: A Study Powered by Single Entity Electrochemistry

Metal-organic frameworks (MOFs) and their derivatives have captivated immense interest due to their tunable chemical composition and structures. Our research introduces an elegant strategy for advancing hybrid MOF-based electrocatalysts, employing scanning electrochemical cell microscopy (SECCM) for single-entity electrochemistry probing of individual particles with precisely engineered compositions and structures. We achieved controlled phosphidation of Prussian blue analogues, forming hollow nanocubes with Fe-doped CoP/Co2P heterojunctions, which demonstrated significantly enhanced hydrogen evolution reaction (HER) activity, emphasizing the pivotal role of structural and compositional tuning in transition metal phosphide catalysts. Utilizing SECCM, we probed the intrinsic HER activity of individual nanocubes, correlating their electrochemical behavior with their size and composition. Computational insights revealed that the heterojunctions enhanced the electronic conductivity and spin density, established internal electric fields, and minimized the Gibbs free energy barrier. This study paves the way toward advanced nanostructured electrocatalysts, underscoring the crucial interplay between size, structure, composition, and catalytic efficacy.

3D Cu Microbuds for Electrocatalytic CO Reduction Reaction

Cu-based materials can electrocatalytically reduce CO2 or CO into high-value-added multi-carbon (C2+) products. The features, including morphology, crystal plane, etc., have a great influence on their electrocatalytic performance. Herein, the 3D Cu microbuds (3D Cu MBs) are finely synthesized with enriched grain boundaries by controlling the reaction temperature, time, and pH. The obtained Cu MBs can work as an efficient catalyst for electrocatalytic CO reduction reaction (eCORR) in a flow cell. As compared to the commercial micron Cu, Cu MBs exhibit a significantly higher C2+ product selectivity (≈83% at -0.58 V vs reversible hydrogen electrode-RHE), higher partial current density (410 mA cm-2), and a lower overpotential. The typical 3D hierarchical structure and polycrystalline feature endow the Cu MBs with abundant active grain boundaries for eCORR to form C2+ products. This study offers a new insight into the crystalline-controlled synthesis of 3D Cu catalyst for CO electrolysis.

Revealing the diverse electrochemistry of nanoparticles with scanning electrochemical cell microscopy

The next generation of electroactive materials will depend on advanced nanomaterials, such as nanoparticles (NPs), for improved function and reduced cost. As such, the development of structure-function relationships for these NPs has become a prime focus for researchers from many fields, including materials science, catalysis, energy storage, photovoltaics, environmental/biomedical sensing, etc. The technique of scanning electrochemical cell microscopy (SECCM) has naturally positioned itself as a premier experimental methodology for the investigation of electroactive NPs, due to its unique capability to encapsulate individual, spatially distinct entities, and to apply a potential to (and measure the resulting current of) single-NPs. Over the course of conducting these single-NP investigations, a number of unexpected (i.e. rarely-reported) results have been collected, including fluctuating current responses, and carrying of the NP by the SECCM probe, hypothesised to be due to insufficient NP-surface interaction. Additionally, locations with measurable electrochemical activity have been found to contain no associated NP, and conversely locations with no activity have been found to contain NPs. Through presenting and discussing these findings, this article seeks to highlight complications in single-NP SECCM experiments, particularly those arising from issues with sample preparation.

Delivery of carbon dioxide to an electrode surface using a nanopipette

We have developed a new scanning probe approach for the delivery of a gas-phase reactant to the surface of an electrocatalyst through a self-replenishing bubble located at the end of a scanning probe. This approach enables local electrocatalytic rates to be detected under very-high mass transport rates due to the small distance between the gas-phase reactant in the bubble and the electrocatalyst surface. Here we report experiments for the delivery of carbon dioxide to a gold ultramicroelectrode surface using a micron-scale nanopipette. The approach curve profiles that we measure suggest a complex interplay between carbon dioxide reduction and hydrogen evolution which is mediated by both the probe-electrode distance and the potential of the gold ultramicroelectrode.

Radially Distributed Electron Transfer on Single-Crystalline Surface of Gold Microplates

Electron transfer is ubiquitous in many chemical reactions and biological phenomena; however, the spatial heterogeneities of electron transfer kinetics in electrocatalysis are so far insufficiently resolved. Measuring and understanding the localized electron transfer are crucial to deciphering the intrinsic activity of electrocatalysts and to achieving further improvements in performance. By using scanning electrochemical probe microscopy to spatially resolve redox electrochemistry across the single-crystalline surface of gold microplates, we discover an intriguing radially distributed electron transfer pattern, where the kinetics around the periphery region are significantly higher than those at the central region, regardless of the redox reaction types. In combination with atomic force microscopy-based infrared spectroscopy for synergistic interrogation of local chemical heterogeneities, we deduce that such a radial pattern of electron transfer originates from the uneven distribution of passive adlayer across the microplate surface. Subsequently, we verify that the spatial heterogeneity of electron transfer can be eliminated by removing the surface adlayer by either mild room temperature aging or oxygen plasma exposure. In addition to gaining insight into the spatial heterogeneities of electron transfer at the nanoscale, our work highlights the important effect of adsorbed organic species at nanocrystal surfaces on electrocatalysis.

Electrocatalytic Mapping of Metal Fatigue with Persistent Slip Bands

Metal fatigue, characterized by the accumulation of dislocation defects, is a prevalent failure mode in structural materials. Nondestructive early-stage detection of metal fatigue is extremely important to prevent disastrous events and protect human life. However, the lack of a precise quantitative method to visualize fatigue with spatiotemporal resolution poses a significant obstacle to timely detection. Here, we demonstrate a nondestructive electrocatalytic method to visualize metal fatigue, which is promising for future fatigue early detections. The persistent slip band (PSB) is considered one of the most consequential defect structures for metal fatigue failure. The selective electrochemistry is highly dependent on the metal crystallography and the collective dislocations in the PSB structure, enabling the amplification of the electrochemical response and differentiation of the fatigue stages at a submillimeter resolution. In addition, this nondestructive electrocatalytic method is applicable to several common metals, including copper, silver, iron, and aluminum, holding great significance where metal fatigue is a critical concern.

Designable Electrochemiluminescence Patterning for Renewable and Enhanced Bioimaging

Electrochemical imaging enables an in-depth analysis of the interface heterogeneity and reaction kinetics of single entities. However, electrode passivation during electrochemical reactions decreases the active sites and harms the long-term stability. Here, we introduce a method using laser-induced photothermal effects to restore the electrochemical activity, which is particularly displayed as enhanced micrometric patterns in electrochemiluminescence (ECL) microscopy. By co-localization characterization and X-ray photoelectron spectroscopy (XPS), the mechanism of active site regeneration is validated as the removal of the oxide film for restoring the local surface ECL reactivity under laser irradiation. The surface-confined and voltage-dependent features of ECL allows for easy pattern erasure and rewriting, and it shows good reversibility and anti-counterfeiting potential. This approach overcomes the passivation processes, evidently improves the image quality of single biological entities including Shewanella bacteria and cells, and makes the subtle contour structures more distinct. The renewable electrode interface also enhances the ECL signal of model bead-based bioassays. This approach not only showcases precise control in fabricating micron patterns but also holds promise for enhancing the sensitivity in electrochemical immunoassays and bioimaging.

Harnessing the Unconventional Cubic Phase in 2D LaNiO3 Perovskite for Highly Efficient Urea Oxidation

Phase engineering is a critical strategy in electrocatalysis, as it allows for the modulation of electronic, geometric, and chemical properties to directly influence the catalytic performance. Despite its potential, phase engineering remains particularly challenging in thermodynamically stable perovskites, especially in a 2D structure constraint. Herein, we report phase engineering in 2D LaNiO3 perovskite using the strongly non-equilibrium microwave shock method. This approach enables the synthesis of conventional hexagonal and unconventional trigonal and cubic phases in LaNiO3 by inducing selective phase transitions at designed temperatures, followed by rapid quenching to allow precise phase control while preserving the 2D porous structure. These phase transitions induce structural distortions in the [LaO]+ layers and the hybridization between Ni 3d and O 2p states, modifying local charge distribution and enhancing electron transport during the six-electron urea oxidation process (UOR). The cubic LaNiO3 offers optimal electron transport and active site accessibility due to its high structural symmetry and open interlayer spacing, resulting in a low onset potential of 1.27 V and a Tafel slope of 33.1 mV dec-1 for UOR, outperforming most current catalysts. Our strategy features high designability in phase engineering, enabling various electrocatalysts to harness the power of unconventional phases.

Tailoring Interlayer Microenvironment of 2D Layered Double Hydroxides for CO2 Reduction with Enhanced C2+ Production

Both the physicochemical properties of catalytic material and the structure of loaded catalyst layer (CL) on gas diffusion electrode (GDE) are of crucial importance in determining the conversion efficiency and product selectivity of carbon dioxide reduction reaction (CO2RR). However, the highly reducing reaction condition of CO2RR will lead to the uncontrollable structural and compositional changes of catalysts, making it difficult to tailor surface properties and microstructure of the real active species for favored products. Herein, the interlayer microenvironment of copper-based layered double hydroxides (LDHs) is rationally tuned by a facile ink solvent engineering, which affects both the surface characters and microstructure of CL on GDE, leading to distinct catalytic activity and product selectivity. According to series of in situ and ex situ techniques, the appropriate surface wettability and thickness of porous CL are found to play critical roles in controlling the local CO2 concentration and water dissociation steps that are key for hydrogenation during CO2RR, leading to a high Faradaic efficiency of 75.3% for C2+ products and a partial current density of 275 mA cm-2 at -0.8 V versus RHE. This work provides insights into rational design of efficient electrocatalysts toward CO2RR for multi-carbon generation.

Correlating Thickness and Phase of Single Co(OH)2 Micro-Platelets to the Intrinsic Activity of Oxygen Evolution Electrocatalysis

Morphology, crystal phase, and its transformation are important structures that frequently determine electrocatalytic activity, but the correlations of intrinsic activity with them are not completely understood. Herein, using Co(OH)2 micro-platelets with well-defined structures (phase, thickness, area, and volume) as model electrocatalysts of oxygen evolution reaction, multiple in situ microscopy is combined to correlate the electrocatalytic activity with morphology, phase, and its transformation. Single-entity morphology and electrochemistry characterized by atomic force microscopy and scanning electrochemical cell microscopy reveal a thickness-dependent turnover frequency (TOF) of α-Co(OH)2. The TOF (≈9.5 s-1) of α-Co(OH)2 with ≈14 nm thickness is ≈95-fold higher than that (≈0.1 s-1) with ≈80 nm. Moreover, this thickness-dependent activity has a critical thickness of ≈30 nm, above which no thickness-dependence is observed. Contrarily, β-Co(OH)2 reveals a lower TOF (≈0.1 s-1) having no significant correlation with thickness. Combining single-entity electrochemistry with in situ Raman microspectroscopy, this thickness-dependent activity is explained by more reversible Co3+/Co2+ kinetics and larger ratio of active Co sites of thinner α-Co(OH)2, accompanied with faster phase transformation and more extensive surface restructuration. The findings highlight the interactions among thickness, ratio of active sites, kinetics of active sites, and phase transformation, and offer new insights into structure-activity relationships at single-entity level.

Concave Grain Boundaries Stabilized by Boron Segregation for Efficient and Durable Oxygen Reduction

The oxygen reduction reaction (ORR) is a critical process that limits the efficiency of fuel cells and metal-air batteries due to its slow kinetics, even when catalyzed by platinum (Pt). To reduce Pt usage, enhancing both the specific activity and electrochemically active surface area (ECSA) of Pt catalysts is essential. Here, ultrafine, grain boundary (GB)-rich Pt nanoparticle assemblies are proposed as efficient ORR catalysts. These nanowires offer a large ECSA and a high density of concave GB sites, which improve specific activity. Atoms at these GB sites exhibit increased coordination and lattice distortion, leading to a favorable reduction in oxygen binding energy and enhanced ORR performance. Furthermore, boron segregation stabilizes these GBs, preserving active sites during catalysis. The resulting boron-stabilized Pt nanoassemblies demonstrate ORR specific and mass activities of 9.18 mA cm-2 and 6.40 A mg-1 Pt (at 0.9 V vs. RHE), surpassing commercial Pt/C catalysts by over 35-fold, with minimal degradation after 60 000 potential cycles. This approach offers a versatile platform for optimizing the catalytic performance of a wide range of nanoparticle systems.

Prediction of perovskite oxygen vacancies for oxygen electrocatalysis at different temperatures

Efficient catalysts are imperative to accelerate the slow oxygen reaction kinetics for the development of emerging electrochemical energy systems ranging from room-temperature alkaline water electrolysis to high-temperature ceramic fuel cells. In this work, we reveal the role of cationic inductive interactions in predetermining the oxygen vacancy concentrations of 235 cobalt-based and 200 iron-based perovskite catalysts at different temperatures, and this trend can be well predicted from machine learning techniques based on the cationic lattice environment, requiring no heavy computational and experimental inputs. Our results further show that the catalytic activity of the perovskites is strongly correlated with their oxygen vacancy concentration and operating temperatures. We then provide a machine learning-guided route for developing oxygen electrocatalysts suitable for operation at different temperatures with time efficiency and good prediction accuracy.

Chiral Nanostructured Ag Films for Multicarbon Products from CO2 Electroreduction

The formation of multicarbon products from CO2 electroreduction is challenging on materials other than Cu-based catalysts. Ag has been known to be a typical metal catalyst, producing CO in CO2 electroreduction. The formation of C2+ products by Ag has never been reported because the carbon-carbon (C-C) coupling is an unfavorable process due to the high reaction barrier energy of *OCCO. Here, we propose that the chirality-induced spin polarization of chiral nanostructured Ag films (CNAFs) can promote the formation of triplet OCCO by regulating its parallel electron spin alignment, and the helical lattice distortion of nanostructures can decrease the reaction energy of *OCCO, which triggers C-C coupling and promotes subsequent *OCCO hydrogenation to facilitate the generation of C2+ products. The CNAFs with helically lattice-distorted nanoflakes were fabricated via electrodeposition using phenylalanine as the symmetry-breaking agent. C2+ products (C2H4, C2H6, C3H8, C2H5OH, and CH3COOH) with a Faradaic efficiency of ∼4.7% and a current density of ∼22 mA/cm2 were generated in KHCO3 electrolytes under 12.5 atm of CO2 (g). Our findings propose that the chiral nanostructured materials can regulate the multifunctionality of catalytic performance in the catalytic reactions with triplet intermediates and products.

Grain boundary engineering for efficient and durable electrocatalysis

Grain boundaries in noble metal catalysts have been identified as critical sites for enhancing catalytic activity in electrochemical reactions such as the oxygen reduction reaction. However, conventional methods to modify grain boundary density often alter particle size, shape, and morphology, obscuring the specific role of grain boundaries in catalytic performance. This study addresses these challenges by employing gold nanoparticle assemblies to control grain boundary density through the manipulation of nanoparticle collision frequency during synthesis. We demonstrate a direct correlation between increased grain boundary density and enhanced two-electron oxygen reduction reaction activity, achieving a significant improvement in both specific and mass activity. Additionally, the gold nanoparticle assemblies with high grain boundary density exhibit remarkable electrochemical stability, attributed to boron segregation at the grain boundaries, which prevents structural degradation. This work provides a promising strategy for optimizing the activity, selectivity, and stability of noble metal catalysts through precise grain boundary engineering.

Influence of Particle Size on Mass Transport during the Oxygen Reduction Reaction at Single Silver Particles Using Scanning Electrochemical Cell Microscopy

Single entity electrochemical measurements enable insight into the electrocatalytic activity of individual particles based on composition, shape, and crystallographic orientation. In addition to structural effects, particle size can further influence electrocatalytic activity and reaction mechanisms through mass transport effects. In this work, electrodeposition was used to grow well-separated silver particles of varying sizes from 100 to 500 nm in radius. Using a multimicroscopy approach of scanning electrochemical cell microscopy combined with scanning electron microscopy, the electrocatalytic current of individual silver particles toward the oxygen reduction reaction was evaluated as a function of their size. It was found that the current density increased with decreasing particle radius, which was correlated to the mass transport of oxygen to the silver particle, demonstrating the importance of size dependent mass transport effects that can occur at the single particle level using scanning electrochemical cell microscopy and opening new opportunities for quantitative electrocatalysis measurements.

Single Entity Electrocatalysis

Making a measurement over millions of nanoparticles or exposed crystal facets seldom reports on reactivity of a single nanoparticle or facet, which may depart drastically from ensemble measurements. Within the past 30 years, science has moved toward studying the reactivity of single atoms, molecules, and nanoparticles, one at a time. This shift has been fueled by the realization that everything changes at the nanoscale, especially important industrially relevant properties like those important to electrocatalysis. Studying single nanoscale entities, however, is not trivial and has required the development of new measurement tools. This review explores a tale of the clever use of old and new measurement tools to study electrocatalysis at the single entity level. We explore in detail the complex interrelationship between measurement method, electrocatalytic material, and reaction of interest (e.g., carbon dioxide reduction, oxygen reduction, hydrazine oxidation, etc.). We end with our perspective on the future of single entity electrocatalysis with a key focus on what types of measurements present the greatest opportunity for fundamental discovery.

High Throughput Correlative Electrochemistry-Microscopy Analysis on a Zn-Al Alloy

Conventional electrodes and electrocatalysts possess complex compositional and structural motifs that impact their overall electrochemical activity. These motifs range from defects and crystal orientation on the electrode surface to layers and composites with other electrode components, such as binders. Therefore, it is vital to identify how these individual motifs alter the electrochemical activity of the electrode. Scanning electrochemical cell microscopy (SECCM) is a powerful tool that has been developed for investigating the electrochemical properties of complex structures. An example of a complex electrode surface is Zn-Al alloys, which are utilized in various sectors ranging from cathodic protection of steel to battery electrodes. Herein, voltammetric SECCM and correlative microstructure analysis are deployed to probe the electrochemical activities of a range of microstructural features, with 651 independent voltammetric measurements made in six distinctive areas on the surface of a Zn-Al alloy. Energy-dispersive X-ray spectroscopy (EDS) mapping reveals that specific phases of the alloy structure, particularly the α-phase Zn-Al, favor the early stages of metal dissolution (i.e., oxidation) and electrochemical reduction processes such as the oxygen reduction reaction (ORR) and redeposition of dissolved metal ions. A correlative analysis performed by comparing high-resolution quantitative elemental composition (i.e., EDS) with the corresponding spatially resolved cyclic voltammograms (i.e., SECCM) shows that the nanospot α-phase of the Zn-Al alloy contains high Al content (30-50%), which may facilitate local Al dissolution as the local pH increases during the ORR in unbuffered aqueous media. Overall, SECCM-based high-throughput electrochemical screening, combined with microstructure analysis, conclusively demonstrates that structure-composition heterogeneity significantly influences the local electrochemical activity on complex electrode surfaces. These insights are invaluable for the rational design of advanced electromaterials.

Five years of scanning electrochemical cell microscopy (SECCM): new insights and innovations

Scanning electrochemical cell microscopy (SECCM) is a nanopipette-based technique which enables measurement of localised electrochemistry. SECCM has found use in a wide range of electrochemical applications, and due to the wider uptake of this technique in recent years, new applications and techniques have been developed. This minireview has collected all SECCM research articles published in the last 5 years, to demonstrate and celebrate the recent advances, and to make it easier for SECCM researchers to remain well-informed. The wide range of SECCM applications is demonstrated, which are categorised here into electrocatalysis, electroanalysis, photoelectrochemistry, biological materials, energy storage materials, corrosion, electrosynthesis, and instrumental development. In the collection of this library of SECCM studies, a few key trends emerge. (1) The range of materials and processes explored with SECCM has grown, with new applications emerging constantly. (2) The instrumental capabilities of SECCM have grown, with creative techniques being developed from research groups worldwide. (3) The SECCM research community has grown significantly, with adoption of the SECCM technique becoming more prominent.

Long-Range SECCM Enables High-Throughput Electrochemical Screening of High Entropy Alloy Electrocatalysts at Up-To-Industrial Current Densities

High-entropy alloys (HEAs), especially in the form of compositional complex solid solutions (CCSS), have gained attention in the field of electrocatalysis. However, exploring their vast composition space concerning their electrocatalytic properties imposes significant challenges. Scanning electrochemical cell microscopy (SECCM) offers high-speed electrochemical analysis on surface areas with a lateral resolution down to tens of nm. However, high-precision piezo positioners often used for the motion of the tip limit the area of SECCM scans to the motion range of the piezo positioners which is typically a few tens of microns. To bridge this experimental gap, the study proposes a long-range SECCM system with a rapid gas-exchange environmental cell for high-throughput electrochemical characterization of 100 mm diameter HEA thin-film material libraries (ML) obtained by combinatorial co-sputtering. Due to the gas-liquid interface at the positioned SECCM droplet on the sample, high-throughput evaluation under industrial current density conditions becomes feasible. This allows the direct correlation between electrocatalytic activity and material composition with high statistical reliability. The multidimensional data obtained accelerates materials discovery, development, and optimization.

Synergistic Effect of Grain Boundaries and Oxygen Vacancies on Enhanced Selectivity for Electrocatalytic CO2 Reduction

Dual-engineering involved of grain boundaries (GBs) and oxygen vacancies (VO) efficiently engineers the material's catalytic performance by simultaneously introducing favorable electronic and chemical properties. Herein, a novel SnO2 nanoplate is reported with simultaneous oxygen vacancies and abundant grain boundaries (V,G-SnOx/C) for promoting the highly selective conversion of CO2 to value-added formic acid. Attributing to the synergistic effect of employed dual-engineering, the V,G-SnOx/C displays highly catalytic selectivity with a maximum Faradaic efficiency (FE) of 87% for HCOOH production at -1.2 V versus RHE and FEs > 95% for all C1 products (CO and HCOOH) within all applied potential range, outperforming current state-of-the-art electrodes and the amorphous SnOx/C. Theoretical calculations combined with advanced characterizations revealed that GB induces the formation of electron-enriched Sn site, which strengthens the adsorption of *HCOO intermediate. While GBs and VO synergistically lower the reaction energy barrier, thus dramatically enhancing the intrinsic activity and selectivity toward HCOOH.

Enhanced CO2 Electroreduction to Multi-Carbon Products on Copper via Plasma Fluorination

The electroreduction of carbon dioxide (CO2) to multi-carbon (C2+) compounds offers a viable approach for the up-conversion of greenhouse gases into valuable fuels and feedstocks. Nevertheless, current industrial applications face limitations due to unsatisfactory conversion efficiency and high overpotential. Herein, a facile and scalable plasma fluorination method is reported. Concurrently, self-evolution during CO2 electroreduction is employed to control the active sites of Cu catalysts. The copper catalyst modified with fluorine exhibits an impressive C2+ Faradaic efficiency (FE) of 81.8% at a low potential of -0.56 V (vs a reversible hydrogen electrode) in an alkaline flow cell. The presence of modified fluorine leads to the exposure and stabilization of high-activity Cu+ species, enhancing the adsorption of *CO intermediates and the generation of *CHO, facilitating the subsequent dimerization. This results in a notably improved conversion efficiency of 13.1% and a significant reduction in the overpotential (≈100 mV) for the C2+ products. Furthermore, a superior C2+ FE of 81.6% at 250 mA cm-2, coupled with an energy efficiency of 31.0%, can be achieved in a two-electrode membrane electrode assembly electrolyzer utilizing the fluorine-modified copper catalyst. The strategy provides novel insights into the controllable electronic modification and surface reconstruction of electrocatalysts with practical potential.

Simultaneous Mapping of Electrocatalytic Activity and Selectivity via Hybrid Scanning Electrochemical Probe Microscopy

Nanoscale scanning electrochemical probe microscopy started to elucidate the heterogeneity of electrocatalytic activity at electrode surfaces. However, understanding the heterogeneity in product selectivity, another crucial aspect of interfacial reactivity, remains challenging. Herein, we introduce a method combining scanning electrochemical microscopy (SECM) and scanning electrochemical cell microscopy (SECCM) to enable the spatially resolved mapping of both activity and selectivity in electrocatalysis. A dual-channel nanopipette probe was developed: one channel for activity mapping and the other for product detection with a high collection efficiency (>95%) and sensitivity. Simultaneous mapping of activity and selectivity in the oxygen reduction reaction (ORR) is demonstrated. Combined with colocalized crystal orientation mapping, we uncover the local electrocatalytic performance of ORR at different facets on polycrystalline Pt and Au. The high-resolution selectivity mapping enabled by our method with colocalized structural characterization can provide structure-activity-selectivity relationships that are often unavailable in ensemble measurement, holding promise for understanding key structural motifs controlling interfacial reactivity.

Correlating activities and defects in (photo)electrocatalysts using in-situ multi-modal microscopic imaging

Photo(electro)catalysts use sunlight to drive chemical reactions such as water splitting. A major factor limiting photocatalyst development is physicochemical heterogeneity which leads to spatially dependent reactivity. To link structure and function in such systems, simultaneous probing of the electrochemical environment at microscopic length scales and a broad range of timescales (ns to s) is required. Here, we address this challenge by developing and applying in-situ (optical) microscopies to map and correlate local electrochemical activity, with hole lifetimes, oxygen vacancy concentrations and photoelectrode crystal structure. Using this multi-modal approach, we study prototypical hematite (α-Fe2O3) photoelectrodes. We demonstrate that regions of α-Fe2O3, adjacent to microstructural cracks have a better photoelectrochemical response and reduced back electron recombination due to an optimal oxygen vacancy concentration, with the film thickness and extended light exposure also influencing local activity. Our work highlights the importance of microscopic mapping to understand activity, in even seemingly homogeneous photoelectrodes.

Interlayer Biatomic Pair Bridging the van der Waals Gap for 100% Activation of 2D Layered Material

2D layered materials are regarded as prospective catalyst candidates due to their advantageous atomic exposure ratio. Nevertheless, the predominant population of atoms residing on the basal plane with saturated coordination, exhibit inert behavior, while a mere fraction of atoms located at the periphery display reactivity. Here, a novel approach is reported to attain complete atom activation in 2D layered materials through the construction of an interlayer biatomic pair bridge. The atoms in question have been strategically optimized to achieve a highly favorable state for the adsorption of intermediates. This optimization results from the introduction of new gap states around the Fermi level. Moreover, the presence of the interlayer bridge facilitates the electron transfer across the van der Waals gap, thereby enhancing the reaction kinetics. The hydrogen evolution reaction exhibits an impressive ultrahigh current density of 2000 mA cm-2 at 397 mV, surpassing the pristine MoS2 by approximately two orders of magnitude (26 mA cm-2 at 397 mV). This study provides new insights for enhancing the efficacy of 2D layered catalysts.

Structure-dependent CO2 reduction on molybdenite (MoS2) electrocatalysts

Scanning electrochemical cell microscopy (SECCM) is employed to directly identify the structure-dependent electrochemical CO2 reduction reaction (eCO2RR) activity of molybdenite (MoS2) electrocatalysts in an aqueous imidazolium-based aprotic ionic liquid electrolyte. Nanoscale defects, where the edge plane (EP) is exposed, are directly targeted, revealing heightened overall activity (eCO2RR + the competing hydrogen evolution reaction, HER) over the relatively inactive basal plane (BP). In addition, certain types of defects (e.g., step edges) only exhibit heightened activity under a CO2 atmosphere (i.e., compared to N2), indirectly confirming higher selectivity at these surface sites. Overall, this work will guide the bottom-up design of earth-abundant electrocatalysts for use in large-scale CO2 electrolysis.

CO2-Promoted Electrocatalytic Reduction of Chlorinated Hydrocarbons

Electrochemical reactions and their catalysis are important for energy and environmental applications, such as carbon neutralization and water purification. However, the synergy in electrocatalysis between CO2 utilization and wastewater treatment has not been explored. In this study, we find that the electrochemical reduction of chlorinated organic compounds such as 1,2-dichloroethane, trichloroethylene, and tetrachloroethylene into ethylene in aqueous media, which is a category of challenging reactions due to the competition of H2 evolution, can be substantially enhanced by simultaneously carrying out the reduction of CO2 on an easily prepared and cost-effective Cu metal catalyst. In the case of 1,2-dichloroethane dechlorination, a 6-fold improvement in Faradaic efficiency and a 19-fold increase in partial current density are demonstrated. Through electrochemical kinetic studies, in situ Raman spectroscopy, and computational simulations, we further find that CO2 reduction reduces hydrogen coverage on the Cu catalyst, which not only exposes more active sites for the dechlorination reaction but also enhances the effective reductive potential on the catalyst surface and reduces the kinetic barrier of the rate-determining step.

Concentrated Formic Acid from CO2 Electrolysis for Directly Driving Fuel Cell

The production of formic acid via electrochemical CO2 reduction may serve as a key link for the carbon cycle in the formic acid economy, yet its practical feasibility is largely limited by the quantity and concentration of the product. Here we demonstrate continuous electrochemical CO2 reduction for formic acid production at 2 M at an industrial-level current densities (i.e., 200 mA cm-2 ) for 300 h on membrane electrode assembly using scalable lattice-distorted bismuth catalysts. The optimized catalysts also enable a Faradaic efficiency for formate of 94.2 % and a highest partial formate current density of 1.16 A cm-2 , reaching a production rate of 21.7 mmol cm-2  h-1 . To assess the practicality of this system, we perform a comprehensive techno-economic analysis and life cycle assessment, showing that our approach can potentially substitute conventional methyl formate hydrolysis for industrial formic acid production. Furthermore, the resultant formic acid serves as direct fuel for air-breathing formic acid fuel cells, boasting a power density of 55 mW cm-2 and an exceptional thermal efficiency of 20.1 %.

Efficient multicarbon formation in acidic CO2 reduction via tandem electrocatalysis

The electrochemical reduction of CO2 in acidic conditions enables high single-pass carbon efficiency. However, the competing hydrogen evolution reaction reduces selectivity in the electrochemical reduction of CO2, a reaction in which the formation of CO, and its ensuing coupling, are each essential to achieving multicarbon (C2+) product formation. These two reactions rely on distinct catalyst properties that are difficult to achieve in a single catalyst. Here we report decoupling the CO2-to-C2+ reaction into two steps, CO2-to-CO and CO-to-C2+, by deploying two distinct catalyst layers operating in tandem to achieve the desired transformation. The first catalyst, atomically dispersed cobalt phthalocyanine, reduces CO2 to CO with high selectivity. This process increases local CO availability to enhance the C-C coupling step implemented on the second catalyst layer, which is a Cu nanocatalyst with a Cu-ionomer interface. The optimized tandem electrodes achieve 61% C2H4 Faradaic efficiency and 82% C2+ Faradaic efficiency at 800 mA cm-2 at 25 °C. When optimized for single-pass utilization, the system reaches a single-pass carbon efficiency of 90 ± 3%, simultaneous with 55 ± 3% C2H4 Faradaic efficiency and a total C2+ Faradaic efficiency of 76 ± 2%, at 800 mA cm-2 with a CO2 flow rate of 2 ml min-1.

Connecting Biological and Synthetic Approaches for Electrocatalytic CO2 Reduction

Electrocatalytic CO2 reduction has developed into a broad field, spanning fundamental studies of enzymatic 'model' catalysts to synthetic molecular catalysts and heterogeneous gas diffusion electrodes producing commercially relevant quantities of product. This diversification has resulted in apparent differences and a disconnect between seemingly related approaches when using different types of catalysts. Enzymes possess discrete and well understood active sites that can perform reactions with high selectivity and activities at their thermodynamic limit. Synthetic small molecule catalysts can be designed with desired active site composition but do not yet display enzyme-like performance. These properties of the biological and small molecule catalysts contrast with heterogeneous materials, which can contain multiple, often poorly understood active sites with distinct reactivity and therefore introducing significant complexity in understanding their activities. As these systems are being better understood and the continuously improving performance of their heterogeneous active sites closes the gap with enzymatic activity, this performance difference between heterogeneous and enzymatic systems begins to close. This convergence removes the barriers between using different types of catalysts and future challenges can be addressed without multiple efforts as a unified picture for the biological-synthetic catalyst spectrum emerges.

The Influence of Mesoscopic Surface Structure on the Electrocatalytic Selectivity of CO2 Reduction with UHV-Prepared Cu(111) Single Crystals

The key role of morphological defects (e.g., irregular steps and dislocations) on the selectivity of model Cu catalysts for the electrocatalytic reduction of CO2 (CO2RR) is illustrated here. Cu(111) single-crystal surfaces prepared under ultrahigh vacuum (UHV) conditions and presenting similar chemical and local microscopic surface features were found to display different product selectivity during the CO2RR. In particular, changes in selectivity from hydrogen-dominant to hydrocarbon-dominant product distributions were observed based on the number of CO2RR electrolysis pretreatment cycles performed prior to a subsequent UHV surface regeneration treatment, which lead to surfaces with seemingly identical chemical composition and local crystallographic structure. However, significant mesostructural changes were observed through a micron-scale microscopic analysis, including a higher density of irregular steps on the samples producing hydrocarbons. Thus, our findings highlight that step edges are key for C-C coupling in the CO2RR and that not only atomistic but also mesoscale characterization of electrocatalytic materials is needed in order to comprehend complex selectivity trends.

Confinement of ionomer for electrocatalytic CO2 reduction reaction via efficient mass transfer pathways

Gas diffusion electrodes (GDEs) mediate the transport of reactants, products and electrons for the electrocatalytic CO2 reduction reaction (CO2RR) in membrane electrode assemblies. The random distribution of ionomer, added by the traditional physical mixing method, in the catalyst layer of GDEs affects the transport of ions and CO2. Such a phenomenon results in elevated cell voltage and decaying selectivity at high current densities. This paper describes a pre-confinement method to construct GDEs with homogeneously distributed ionomer, which enhances mass transfer locally at the active centers. The optimized GDE exhibited comparatively low cell voltages and high CO Faradaic efficiencies (FE > 90%) at a wide range of current densities. It can also operate stably for over 220 h with the cell voltage staying almost unchanged. This good performance can be preserved even with diluted CO2 feeds, which is essential for pursuing a high single-pass conversion rate. This study provides a new approach to building efficient mass transfer pathways for ions and reactants in GDEs to promote the electrocatalytic CO2RR for practical applications.

Boosting N2O Catalytic Decomposition by the Synergistic Effect of Multiple Elements in Cobalt-Based High-Entropy Oxides

Nitrous oxide (N2O) has a detrimental impact on the greenhouse effect, and its efficient catalytic decomposition at low temperatures remains challenging. Herein, the cobalt-based high-entropy oxide with a spinel-type structure (Co-HEO) is successfully fabricated via a facile coprecipitation method for N2O catalytic decomposition. The obtained Co-HEO catalyst displays more remarkable catalytic performance and higher thermal stability compared with single and binary Co-based oxides, as the temperature of 90% N2O decomposition (T90) is 356 °C. A series of characterization results reveal that the synergistic effect of multiple elements enhances the reducibility and augments oxygen vacancy in the high-entropy system, thus boosting the activity of the Co-HEO catalyst. Moreover, density functional theory (DFT) calculations and the temperature-programmed surface reaction (TPSR) with isotope labeling demonstrate that N2O decomposition on the Co-HEO catalyst follows the Langmuir-Hinshelwood (L-H) mechanism with the promotion of abundant oxygen vacancies. This work provides a fundamental understanding of the synergistic catalytic effect in N2O decomposition and paves the way for the novel environmental catalytic applications of HEO.

Vacancy-induced catalytic mechanism for alcohol electrooxidation on nickel-based electrocatalyst

Owing to outstanding performances, nickel-based electrocatalysts are commonly used in electrochemical alcohol oxidation reactions (AORs), and the active phase is usually vacancy-rich nickel oxide/hydroxide (NiOx Hy ) species. However, researchers are not aware of the catalytic role of atom vacancy in AORs. Here, we study vacancy-induced catalytic mechanisms for AORs on NiOx Hy species. As to AORs on oxygen-vacancy-poor β-Ni(OH)2 , the only redox mediator is electrooxidation-induced electrophilic lattice oxygen species, which can only catalyze the dehydrogenation process (e.g., the electrooxidation of primary alcohol to carboxylic acid) instead of the C-C bond cleavage. Hence, vicinal diol electrooxidation reaction involving the C-C bond cleavage is not feasible with oxygen-vacancy-poor β-Ni(OH)2 . Only through oxygen vacancy-induced adsorbed oxygen-mediated mechanism, can oxygen-vacancy-rich NiOx Hy species catalyze the electrooxidation of vicinal diol to carboxylic acid and formic acid accompanied with the C-C bond cleavage. Crucially, we examine how vacancies and vacancy-induced catalytic mechanisms work during AORs on NiOx Hy species.

Hollow carbon-based materials for electrocatalytic and thermocatalytic CO2 conversion

Electrocatalytic and thermocatalytic CO2 conversions provide promising routes to realize global carbon neutrality, and the development of corresponding advanced catalysts is important but challenging. Hollow-structured carbon (HSC) materials with striking features, including unique cavity structure, good permeability, large surface area, and readily functionalizable surface, are flexible platforms for designing high-performance catalysts. In this review, the topics range from the accurate design of HSC materials to specific electrocatalytic and thermocatalytic CO2 conversion applications, aiming to address the drawbacks of conventional catalysts, such as sluggish reaction kinetics, inadequate selectivity, and poor stability. Firstly, the synthetic methods of HSC, including the hard template route, soft template approach, and self-template strategy are summarized, with an evaluation of their characteristics and applicability. Subsequently, the functionalization strategies (nonmetal doping, metal single-atom anchoring, and metal nanoparticle modification) for HSC are comprehensively discussed. Lastly, the recent achievements of intriguing HSC-based materials in electrocatalytic and thermocatalytic CO2 conversion applications are presented, with a particular focus on revealing the relationship between catalyst structure and activity. We anticipate that the review can provide some ideas for designing highly active and durable catalytic systems for CO2 valorization and beyond.

Exploring how cation entropy influences electric double layer formation and electrochemical reactivity

Electric double layers are crucial to energy storage and electrocatalytic device performance. While double layer formation originates in electrostatic interactions, electric double layer properties are governed by a balance of both electrostatic and entropic driving forces. Favorable ion-surface electrostatic interactions attract counterions to charged surfaces to compensate, or "screen," potentials, but the confinement of these same ions from a bulk reservoir to the interface incurs an entropic penalty. Here, we use a dicationic imidazolium ionic liquid and its monovalent analogue to explore how cation valence and entropy influence double layer formation and electrochemical reactivity using CO2 electroreduction as a model reaction. We find that divalent and monovalent cations display similar CO2 reduction kinetics but differ vastly in steady-state reactivity due to rapid electrochemically induced precipitation of insulating dicationic (bi)carbonate films. Using in situ surface-enhanced Raman scattering spectroscopy, we find that potential-dependent cation reorientation occurs at similar potentials between the two ionic liquids, but the introduction of a covalent link in the divalent cation imparts a more ordered double layer structure that favors (bi)carbonate precipitation. In mixed monovalent-divalent electrolytes, we find that the divalent cations dominate interfacial properties by preferentially accumulating at surfaces even at very low relative concentrations. Our findings confirm that ion entropy plays a key role in modulating local electrochemical environments. Furthermore, we highlight how double layer properties are sensitive to the properties of counterions that pay the lowest entropic penalty to accumulate at interfaces. Overall, we illustrate that ion entropy provides a new knob to tune reaction microenvironments and unveil how entropy plays a major role in modulating electrochemical reactivity in mixed ion electrolytes.

Electrocatalytic CO2 Reduction to Ethylene: From Advanced Catalyst Design to Industrial Applications

The value-added chemicals, monoxide, methane, ethylene, ethanol, ethane, and so on, can be efficiently generated through the electrochemical CO2 reduction reaction (eCO2 RR) when equipped with suitable catalysts. Among them, ethylene is particularly important as a chemical feedstock for petrochemical manufacture. However, despite its high Faradaic efficiency achievable at relatively low current densities, the substantial enhancement of ethylene selectivity and stability at industrial current densities poses a formidable challenge. To facilitate the industrial implementation of eCO2 RR for ethylene production, it is imperative to identify key strategies and potential solutions through comprehending the recent advancements, remaining challenges, and future directions. Herein, the latest and innovative catalyst design strategies of eCO2 RR to ethylene are summarized and discussed, starting with the properties of catalysts such as morphology, crystalline, oxidation state, defect, composition, and surface engineering. The review subsequently outlines the related important state-of-the-art technologies that are essential in driving forward eCO2 RR to ethylene into practical applications, such as CO2 capture, product separation, and downstream reactions. Finally, a greenhouse model that integrates CO2 capture, conversion, storage, and utilization is proposed to present an ideal perspective direction of eCO2 RR to ethylene.

Multiscale Analysis of Electrocatalytic Particle Activities: Linking Nanoscale Measurements and Ensemble Behavior

Nanostructured electrocatalysts exhibit variations in electrochemical properties across different length scales, and the intrinsic catalytic characteristics measured at the nanoscale often differ from those at the macro-level due to complexity in electrode structure and/or composition. This aspect of electrocatalysis is addressed herein, where the oxygen evolution reaction (OER) activity of β-Co(OH)2 platelet particles of well-defined structure is investigated in alkaline media using multiscale scanning electrochemical cell microscopy (SECCM). Microscale SECCM probes of ∼50 μm diameter provide voltammograms from small particle ensembles (ca. 40-250 particles) and reveal increasing dispersion in the OER rates for samples of the same size as the particle population within the sample decreases. This suggests the underlying significance of heterogeneous activity at the single-particle level that is confirmed through single-particle measurements with SECCM probes of ∼5 μm diameter. These measurements of multiple individual particles directly reveal significant variability in the OER activity at the single-particle level that do not simply correlate with the particle size, basal plane roughness, or exposed edge plane area. In combination, these measurements demarcate a transition from an "individual particle" to an "ensemble average" response at a population size of ca. 130 particles, above which the OER current density closely reflects that measured in bulk at conventional macroscopic particle-modified electrodes. Nanoscale SECCM probes (ca. 120 and 440 nm in diameter) enable measurements at the subparticle level, revealing that there is selective OER activity at the edges of particles and highlighting the importance of the three-phase boundary where the catalyst, electrolyte, and supporting carbon electrode meet, for efficient electrocatalysis. Furthermore, subparticle measurements unveil heterogeneity in the OER activity among particles that appear superficially similar, attributable to differences in defect density within the individual particles, as well as to variations in electrical and physical contact with the support material. Overall this study provides a roadmap for the multiscale analysis of nanostructured electrocatalysts, directly demonstrating the importance of multilength scale factors, including particle structure, particle-support interaction, presence of defects, etc., in governing the electrochemical activities of β-Co(OH)2 platelet particles and ultimately guiding the rational design and optimization of these materials for alkaline water electrolysis.

On-chip electrocatalytic microdevices

On-chip electrocatalytic microdevices (OCEMs) are an emerging electrochemical platform specialized for investigating nanocatalysts at the microscopic level. The OCEM platform allows high-precision electrochemical measurements at the individual nanomaterial level and, more importantly, offers unique perspectives inaccessible with conventional electrochemical methods. This protocol describes the critical concepts, experimental standardization, operational principles and data analysis of OCEMs. Specifically, standard protocols for the measurement of the electrocatalytic hydrogen evolution reaction of individual 2D nanosheets are introduced with data validation, interpretation and benchmarking. A series of factors (e.g., the exposed area of material, the choice of passivation layer and current leakage) that could have effects on the accuracy and reliability of measurement are discussed. In addition, as an example of the high adaptability of OCEMs, the protocol for in situ electrical transport measurement is detailed. We believe that this protocol will promote the general adoption of the OCEM platform and inspire further development in the near future. This protocol requires essential knowledge in chemical synthesis, device fabrication and electrochemistry.

Visualizing the role of applied voltage in non-metal electrocatalysts

Understanding how applied voltage drives the electrocatalytic reaction at the nanoscale is a fundamental scientific problem, particularly in non-metallic electrocatalysts, due to their low intrinsic carrier concentration. Herein, using monolayer molybdenum disulfide (MoS2) as a model system of non-metallic catalyst, the potential drops across the basal plane of MoS2 (ΔVsem) and the electric double layer (ΔVedl) are decoupled quantitatively as a function of applied voltage through in-situ surface potential microscopy. We visualize the evolution of the band structure under liquid conditions and clarify the process of EF keeping moving deep into Ec, revealing the formation process of the electrolyte gating effect. Additionally, electron transfer (ET) imaging reveals that the basal plane exhibits high ET activity, consistent with the results of surface potential measurements. The potential-dependent behavior of kf and ns in the ET reaction are further decoupled based on the measurements of ΔVsem and ΔVedl. Comparing the ET and hydrogen evolution reaction imaging results suggests that the low electrocatalytic activity of the basal plane is mainly due to the absence of active sites, rather than its electron transfer ability. This study fills an experimental gap in exploring driving forces for electrocatalysis at the nanoscale and addresses the long-standing issue of the inability to decouple charge transfer from catalytic processes.

Proton transport through nanoscale corrugations in two-dimensional crystals

Defect-free graphene is impermeable to all atoms1-5 and ions6,7 under ambient conditions. Experiments that can resolve gas flows of a few atoms per hour through micrometre-sized membranes found that monocrystalline graphene is completely impermeable to helium, the smallest atom2,5. Such membranes were also shown to be impermeable to all ions, including the smallest one, lithium6,7. By contrast, graphene was reported to be highly permeable to protons, nuclei of hydrogen atoms8,9. There is no consensus, however, either on the mechanism behind the unexpectedly high proton permeability10-14 or even on whether it requires defects in graphene's crystal lattice6,8,15-17. Here, using high-resolution scanning electrochemical cell microscopy, we show that, although proton permeation through mechanically exfoliated monolayers of graphene and hexagonal boron nitride cannot be attributed to any structural defects, nanoscale non-flatness of two-dimensional membranes greatly facilitates proton transport. The spatial distribution of proton currents visualized by scanning electrochemical cell microscopy reveals marked inhomogeneities that are strongly correlated with nanoscale wrinkles and other features where strain is accumulated. Our results highlight nanoscale morphology as an important parameter enabling proton transport through two-dimensional crystals, mostly considered and modelled as flat, and indicate that strain and curvature can be used as additional degrees of freedom to control the proton permeability of two-dimensional materials.

Nanoelectrochemistry in electrochemical phase transition reactions

Electrochemical phase transition is important in a range of processes, including gas generation in fuel cells and electrolyzers, as well as in electrodeposition in battery and metal production. Nucleation is the first step in these phase transition reactions. A deep understanding of the kinetics, and mechanism of the nucleation and the structure of the nuclei and nucleation sites is fundamentally important. In this perspective, theories and methods for studying electrochemical nucleation are briefly reviewed, with an emphasis on nanoelectrochemistry and single-entity electrochemistry approaches. Perspectives on open questions and potential future approaches are also discussed.

Quantifying the Two-Dimensional Driving Patterns of Chemisorbed Oxygen and Particle Size on NO Reduction Activity and Mechanism

Quantification in the driving patterns of activity descriptors on structure-activity relationships and reaction mechanisms over heterogeneous catalysts is still a great challenge and needs to be addressed urgently. Herein, with the example of typical Mn-based catalysts, based on the activity regularity and many characterizations, the chemisorbed oxygen density (ρ_Oβ) and particle size (d_TEM) have been proposed as the two-dimensional descriptors for selective catalytic reduction of NO, whose role is in quantifying the contents of vacancy defects and the amounts of active sites located on terraces or interfaces, respectively. They can be utilized to construct and quantify the driving patterns for the structure-activity relationships and reaction mechanisms of NO reduction. As a consequence, a complementary modulation for E_a by ρ_Oβ and d_TEM is described quantitatively in terms of the fitted functions. Moreover, based on the structure-activity relationships and the quantification laws of in situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS), the reaction efficiency (RE) of the specific combined NO_x-intermediate is identified as the trigger to drive the Langmuir-Hinshelwood mechanism and modulated by the descriptors complementally and collaboratively following the fitted quantification functions. Either of the two descriptors at its lower values plays a dominant role in regulating E_a and RE, and the dominant factor evolves progressively: d_TEM ↔ coupling d_TEM with ρ_Oβ ↔ ρ_Oβ, when the dependency of E_a and RE on the descriptors is adopted to identify the dominant factor and domains. Therefore, this work has quantitatively accounted for the essence of activity modulation and may provide insight into the quantitative driving patterns for reaction activity and mechanism.

Asymmetric dinitrogen-coordinated nickel single-atomic sites for efficient CO2 electroreduction

Developing highly efficient, selective and low-overpotential electrocatalysts for carbon dioxide (CO₂) reduction is crucial. This study reports an efficient Ni single-atom catalyst coordinated with pyrrolic nitrogen and pyridinic nitrogen for CO₂ reduction to carbon monoxide (CO). In flow cell experiments, the catalyst achieves a CO partial current density of 20.1 mA cm_geo^-2 at -0.15 V vs. reversible hydrogen electrode (V_RHE). It exhibits a high turnover frequency of over 274,000 site^-1 h^-1 at -1.0 V_RHE and maintains high Faradaic efficiency of CO (FE_CO) exceeding 90% within -0.15 to -0.9 V_RHE. Operando synchrotron-based infrared and X-ray absorption spectra, and theoretical calculations reveal that mono CO-adsorbed Ni single sites formed during electrochemical processes contribute to the balance between key intermediates formation and CO desorption, providing insights into the catalyst's origin of catalytic activity. Overall, this work presents a Ni single-atom catalyst with good selectivity and activity for CO₂ reduction while shedding light on its underlying mechanism.

Mechanistic Insights Gained by High Spatial Resolution Reactivity Mapping of Homogeneous and Heterogeneous (Electro)Catalysts

The recent development of high spatial resolution microscopy and spectroscopy tools enabled reactivity analysis of homogeneous and heterogeneous (electro)catalysts at previously unattainable resolution and sensitivity. These techniques revealed that catalytic entities are more heterogeneous than expected and local variations in reaction mechanism due to divergences in the nature of active sites, such as their atomic properties, distribution, and accessibility, occur both in homogeneous and heterogeneous (electro)catalysts. In this review, we highlight recent insights in catalysis research that were attained by conducting high spatial resolution studies. The discussed case studies range from reactivity detection of single particles or single molecular catalysts, inter- and intraparticle communication analysis, and probing the influence of catalysts distribution and accessibility on the resulting reactivity. It is demonstrated that multiparticle and multisite reactivity analyses provide unique knowledge about reaction mechanism that could not have been attained by conducting ensemble-based, averaging, spectroscopy measurements. It is highlighted that the integration of spectroscopy and microscopy measurements under realistic reaction conditions will be essential to bridge the gap between model-system studies and real-world high spatial resolution reactivity analysis.

High-Spatiotemporal-Resolution Electrochemical Measurements of Electrocatalytic Reactivity

The real-time measurement of the individual or local electrocatalytic reactivity of catalyst particles instead of ensemble behavior is considerably challenging but very critical to uncover fundamental insights into catalytic mechanisms. Recent remarkable efforts have been made to the development of high-spatiotemporal-resolution electrochemical techniques, which allow the imaging of the topography and reactivity of fast electron-transfer processes at the nanoscale. This Perspective summarizes emerging powerful electrochemical measurement techniques for studying various electrocatalytic reactions on different types of catalysts. Principles of scanning electrochemical microscopy, scanning electrochemical cell microscopy, single-entity measurement, and molecular probing technique have been discussed for the purpose of measuring important parameters in electrocatalysis. We further demonstrate recent advances in these techniques that reveal quantitative information about the thermodynamic and kinetic properties of catalysts for various electrocatalytic reactions associated with our perspectives. Future research on the next-generation electrochemical techniques is anticipated to be focused on the development of instrumentation, correlative multimodal techniques, and new applications, thus enabling new opportunities for elucidating structure-reactivity relationships and dynamic information at the single active-site level.

Operando Scanning Electrochemical Probe Microscopy during Electrocatalysis

Scanning electrochemical probe microscopy (SEPM) techniques can disclose the local electrochemical reactivity of interfaces in single-entity and sub-entity studies. Operando SEPM measurements consist of using a SEPM tip to investigate the performance of electrocatalysts, while the reactivity of the interface is simultaneously modulated. This powerful combination can correlate electrochemical activity with changes in surface properties, e.g., topography and structure, as well as provide insight into reaction mechanisms. The focus of this review is to reveal the recent progress in local SEPM measurements of the catalytic activity of a surface toward the reduction and evolution of O₂ and H₂ and electrochemical conversion of CO₂. The capabilities of SEPMs are showcased, and the possibility of coupling other techniques to SEPMs is presented. Emphasis is given to scanning electrochemical microscopy (SECM), scanning ion conductance microscopy (SICM), electrochemical scanning tunneling microscopy (EC-STM), and scanning electrochemical cell microscopy (SECCM).

Charge-Separated Pdδ--Cuδ+ Atom Pairs Promote CO2 Reduction to C2

Positively charged Cu sites have been confirmed to significantly promote the production of multicarbon (C₂) products from an electrochemical CO₂ reduction reaction (CO₂RR). However, the positively charged Cu has difficulty in existing under a strong negative bias. In this work, we design a Pd^δ--Cu₃N catalyst containing charge-separated Pd^δ--Cu^δ+ atom pair that can stabilize the Cu^δ+ sites. In situ characterizations and density functional theory reveal that the first reported negatively charged Pd^δ- sites exhibited a superior CO binding capacity together with the adjacent Cu^δ+ sites, synergistically promoting the CO dimerization process to produce C₂ products. As a result, we achieve a 14-fold increase in the C₂ product Faradaic efficiency (FE) on Pd^δ--Cu₃N, from 5.6% to 78.2%. This work provides a new strategy for synthesizing negative valence atom-pair catalysts and an atomic-level modulation approach of unstable Cu^δ+ sites in the CO₂RR.

Nanoscale Electron Transfer Variations at Electrocatalyst-Electrolyte Interfaces Resolved by in Situ Conductive Atomic Force Microscopy

Rational innovation of electrocatalysts requires detailed knowledge of spatial property variations across the solid-electrolyte interface. We introduce correlative atomic force microscopy (AFM) to simultaneously probe, in situ and at the nanoscale, electrical conductivity, chemical-frictional, and morphological properties of a bimetallic copper-gold system for CO2 electroreduction. In air, water, and bicarbonate electrolyte, current-voltage curves reveal resistive CuOx islands in line with local current contrasts, while frictional imaging indicates qualitative variations in the hydration layer molecular ordering upon change from water to electrolyte. Nanoscale current contrast on polycrystalline Au shows resistive grain boundaries and electrocatalytically passive adlayer regions. In situ conductive AFM imaging in water shows mesoscale regions of low current and reveals that reduced interfacial electric currents are accompanied by increased friction forces, thus indicating variations in the interfacial molecular ordering affected by the electrolyte composition and ionic species. These findings provide insights into how local electrochemical environments and adsorbed species affect interfacial charge transfer processes and support building in situ structure-property relationships in catalysis and energy conversion research.