Nano-optic endoscope for high-resolution optical coherence tomography in vivo

Exosome-Based Sensor: A Landmark of the Precision Cancer Diagnostic Era

Extracellular vesicles are nanoscale vesicles released by a diversity of cells that mediate intercellular communication by transporting an array of biomolecules. They are gaining increasing attention in cancer research due to their ability to carry specific biomarkers. This characteristic makes them potentially useful for highly sensitive, noninvasive diagnostic procedures and more precise prognostic assessments. Consequently, EVs are emerging as a transformative tool in cancer treatment, facilitating early detection and personalized medicine. Despite significant progress, clinical implementation is hindered by challenges in EV isolation, purification, and characterization. However, developing advanced biosensor technologies offers promising solutions to these obstacles. This review highlights recent progress in biosensors for EV detection and analysis, focusing on various sensing modalities including optical, electrochemical, microfluidic, nanomechanical, and biological sensors. We also explore techniques for EV isolation, characterization, and analysis, such as electron microscopy, atomic force microscopy, nanoparticle tracking analysis, and single-particle analysis. Furthermore, the review critically assesses the challenges associated with EV detection and put forward future directions, aiming to usher in a cutting-edge era of precision medicine through advanced, sensor-based, noninvasive early cancer diagnosis by detecting EV-carried biomarkers.

Depth-resolved imaging in turbid media via Mueller matrix polarimetry

Significance

Polarimetry offers advantages such as high information dimensionality and sensitivity to microstructures. Determining the depth of the tissue is essential for clinical diagnosis and treatment, such as lesion localization, removal, and drug delivery. However, relying solely on polarization techniques for tissue depth measurement remains a subject for further investigation.

Aim

We aim to investigate the tissue depth measurement in turbid media using Mueller matrix polarimetry, with a focus on fibrous tissues.

Approach

Tissue phantoms are constructed to quantitatively simulate fibrosis at specific depth. By analyzing Mueller matrix measurements across depth gradients, correlations between polarization basic parameters (PBPs) and tissue depth are established using supervised machine learning algorithms.

Results

We introduce an approach by combining degree of polarization (DOP)-sensitive PBPs with anisotropy-sensitive PBPs to develop depth-sensitive polarization feature parameters (DSPFPs). The DSPFPs exhibit enhanced sensitivity to depth in shallow layers while preserving accuracy in deeper layers. The effectiveness and robustness of the proposed method are validated through 2D depth-resolved imaging of tissue phantoms.

Conclusions

We preliminarily explore the feasibility of depth measurement using Mueller matrix polarimetry, establishing a method for tissue depth assessment while also expanding the applications of polarimetry.

Quantitative Phase Imaging with a Meta-Based Interferometric System

Optical phase imaging has become a pivotal tool in biomedical research, enabling label-free visualization of transparent specimens. Traditional optical phase imaging techniques, such as Zernike phase contrast and differential interference contrast microscopy, fall short of providing quantitative phase information. Digital holographic microscopy (DHM) addresses this limitation by offering precise phase measurements; however, off-axis configurations, particularly Mach-Zehnder and Michelson-based setups, are often hindered by environmental susceptibility and bulky optical components due to their separate reference and object beam paths. In this work, we have developed a meta-based interferometric quantitative phase imaging system using a common-path off-axis DHM configuration. A meta-biprism, featuring two opposite gradient phases created using GaN nanopillars selected for their low loss and durability, serves as a compact and efficient beam splitter. Our system effectively captures the complex wavefronts of samples, enabling the retrieval of quantitative phase information, which we demonstrate using standard resolution phase targets and human lung cell lines. Additionally, our system exhibits enhanced temporal phase stability compared to conventional off-axis DHM configurations, reducing phase fluctuations over extended measurement periods. These results not only underline the potential of metasurfaces in advancing the capabilities of quantitative phase imaging but also promise significant advancements in biomedical imaging and diagnostics.

Multidimensional multiplexing metalens for STED microscopy

Stimulated emission depletion (STED) microscopy is a versatile super-resolution imaging technique for life sciences and data storage. Despite continuous breakthroughs, modern STED microscopes are still relatively bulky and limited to laboratory setups. Here, we exploit the multidimensional multiplexing properties of metalenses and experimentally demonstrate the realization of a compact STED lens with a single metasurface. A 635-nm right-handed circularly polarized excitation laser is focused by the metalens into a diffraction-limited Gaussian beam, while a 780-nm depletion beam with opposite chirality is converted into a high-quality donut-shaped focus on the same plane. As a consequence, STED super-resolution imaging based on the metalens has been obtained by recording the unpolarized photoluminescence using the same metalens. The experimentally demonstrated resolution reaches 0.7× of the diffraction limit and can be further improved. This study represents a critical step toward the miniaturization and integration of STED microscope.

Inverse-designed large field-of-view polychromatic metalens for tri-color scanning fiber endoscopy

Metalenses, with their ultrathin thicknesses and their ease for achieving ultra small diameters, offer a promising alternative to refractive lenses in miniaturized imaging systems, such as endoscopes, potentially enabling applications in tightly confined spaces. However, traditional metalenses suffer from strong chromatic aberrations, limiting their utility in multi-color imaging. To address this limitation, here we present an inverse-designed polychromatic metalens with a diameter of 680 μm, focal length of 400 μm, and low dispersion across 3 distinct wavelengths at 643 nm, 532 nm, and 444 nm. The metalens collimates and steers light emitted from a scanning fiber tip, generating scanning beams across a 70° field-of-view to provide illumination for a scan-based imaging. The metalens provides a close-to-diffraction-limited 0.5° angular resolution, only restricted by the effective aperture of the system. The average relative efficiency among three design wavelengths is around 32% for on-axis angle and 13% averaged across the entire field-of-view. This work holds promise for the application of metalenses in endoscopes and other miniaturized imaging systems.

High-performance achromatic flat lens by multiplexing meta-atoms on a stepwise phase dispersion compensation layer

Flat optics have attracted interest for decades due to their flexibility in manipulating optical wave properties, which allows the miniaturization of bulky optical assemblies into integrated planar components. Recent advances in achromatic flat lenses have shown promising applications in various fields. However, it is a significant challenge for achromatic flat lenses with a high numerical aperture to simultaneously achieve broad bandwidth and expand the aperture sizes. Here, we present the zone division multiplex of the meta-atoms on a stepwise phase dispersion compensation (SPDC) layer to address the above challenge. In principle, the aperture size can be freely enlarged by increasing the optical thickness difference between the central and marginal zones of the SPDC layer, without the limit of the achromatic bandwidth. The SPDC layer also serves as the substrate, making the device thinner. Two achromatic flat lenses of 500 nm thickness with a bandwidth of 650-1000 nm are experimentally achieved: one with a numerical aperture of 0.9 and a radius of 20.1 µm, and another with a numerical aperture of 0.7 and a radius of 30.0 µm. To the best of our knowledge, they are the broadband achromatic flat lenses with highest numerical apertures, the largest aperture sizes and thinnest thickness reported so far. Microscopic imaging with a 1.10 µm resolution has also been demonstrated by white light illumination, surpassing any previously reported resolution attained by achromatic metalenses and multi-level diffractive lenses. These unprecedented performances mark a substantial step toward practical applications of flat lenses.

Optical coherence tomography needle probe for real-time visualization of temperature-induced phase changes within subcutaneous fatty tissue

Significance: Selective cryolipolysis is a widely used aesthetic procedure that cools subcutaneous adipose tissue to temperatures as low as - 11 ° C to induce fat cell destruction. However, real-time monitoring techniques are lacking, limiting the ability to optimize safety and efficacy. Traditional imaging methods either fail to provide adequate penetration depth or lack the resolution necessary for visualizing subcutaneous fatty tissue dynamics. Aim: This paper aims to demonstrate that an optical coherence tomography (OCT) needle probe can be used for real-time observation of temperature-induced changes in subcutaneous fatty tissue, potentially enhancing the assessment and optimization of cryolipolysis procedures. Approach: We developed a side-viewing OCT-based needle probe designed for subcutaneous imaging. The probe consists of a fiber-optic system encased in a transparent, biocompatible polymer catheter with an outer diameter of 900    μ m . A 49-degree angled fiber enables imaging, while a piezoelectric scanning system moves the fiber transversely within the catheter. The probe achieves a lateral resolution of < 15    μ m , a working distance of 600    μ m , and a lateral field of view dictated by the scanning system length. OCT imaging was performed on porcine skin with a subcutaneous fat layer >3 cm thick during controlled heating and cooling. Results: OCT imaging revealed increased optical scattering in subcutaneous fatty tissue during cooling, corresponding to the phase transition from liquid to solid. This effect was reversible upon warming, indicating that OCT can dynamically monitor adipocyte crystallization in real time. The observed transition temperatures varied, likely due to differences in lipid composition. Conclusions: OCT-based needle imaging enables direct, high-resolution visualization of adipocyte crystallization, offering a potential tool for optimizing selective cryolipolysis treatments. This technology could improve safety and efficacy by providing real-time feedback on tissue response, facilitating a better understanding of the cooling-induced fat reduction process.

A meta-analysis of the accuracy of different measuring techniques to evaluate the marginal and internal gap of a fixed dental prosthesis: The American Academy of Fixed Prosthodontics, Research in Fixed Prosthodontics Committee

STATEMENT OF PROBLEM

Marginal gaps and the internal adaptation of a fixed dental prosthesis are important parameters related to a successful clinical outcome. Several methods have been used to measure these 2 parameters. In addition to conventional analog methods, digital methods have recently been developed. Nevertheless, statistical comparisons of these different approaches are scarce.

PURPOSE

The purpose of this study was to evaluate the results of the various measuring methods reported in the current literature and compare their results.

MATERIAL AND METHODS

An electronic literature search comprising articles published from January 1990 to June 2023was conducted through the MEDLINE (PubMed) and Web of Science databases. After a quality assessment screening, 17 articles were identified for inclusion in the meta-analysis. Data were used for the random-effects model, forest plots were drawn, and significance tests were conducted in the meta-analysis software program of the Cochrane Collaboration (RevManv5.3.5). Additionally, heterogeneity tests and a risk of bias analysis were performed.

RESULTS

In the general comparison of conventional and digital methods, the data did not show significant differences, and the results presented low homogeneity. When the cross-sectional method (CSM) was compared under a scanning electron microscope with the silicone replica Geomagic software program (SRG) method, CSM recorded significantly smaller gap values than SRG and presented high homogeneity. Meanwhile, in the comparison of CSM with the silicone replica technique (SRT) and the triple scan method (TSM), CSM recorded larger gap values than SRT and TSM, and the data did not show a significant difference. All of these results presented low homogeneity.

CONCLUSIONS

A comparison of most techniques revealed no significant differences in the internal and marginal gaps, except for SRG, which recorded significantly smaller gaps than CSM. However, the conclusions of these findings are limited because of concerns about bias and heterogeneity and because the found marginal gap data are just one way to assess the consistency and reliability of each method.

Electrochemically mutable soft metasurfaces

Active optical metasurfaces, capable of dynamically manipulating light in ultrathin form factors, enable novel interfaces between humans and technology. In such interfaces, soft materials bring many advantages based on their flexibility, compliance and large stimulus-driven responses. Here, we create electrochemically mutable, soft metasurfaces that capitalize on the swelling of soft conducting polymers to alter the shape and associated resonant response of metasurface elements. Such geometric tuning overcomes the typical trade-off between achieving substantial tuning and low optical loss that is intrinsic to dynamic metasurfaces relying on index tuning of materials. Using the commercial polymer PEDOT:PSS, we demonstrate dynamic, high-resolution colour tuning and high-diffraction-efficiency (>19%) beam-steering devices that operate at CMOS-compatible voltages (~1.5 V). These results highlight how the deformability of soft materials can enable a class of high-performance metasurfaces that are suitable for body-worn technologies.

Optical Metasurfaces for Biomedical Imaging and Sensing

Optical metasurfaces, arrays of nanostructures engineered to manipulate light, have emerged as a transformative technology in both research and industry due to their compact design and exceptional light control capabilities. Their strong light-matter interactions enable precise wavefront modulation, polarization control, and significant near-field enhancements. These unique properties have recently driven their application in biomedical fields. In particular, metasurfaces have led to breakthroughs in biomedical imaging technologies, such as achromatic imaging, phase imaging, and extended depth-of-focus imaging. They have also advanced cutting-edge biosensing technologies, featuring high-quality factor resonators and near-field enhancements. As the demand for device miniaturization and system integration increases, metasurfaces are expected to play a pivotal role in the development of next-generation biomedical devices. In this review, we explore the latest advancements in the use of metasurfaces for biomedical applications, with a particular focus on imaging and sensing. Additionally, we discuss future directions aimed at transforming the biomedical field by leveraging the full potential of metasurfaces to provide compact, high-performance solutions for a wide range of applications.

Computer-generated holography enables high-uniformity, high-efficiency depth-of-focus extension in endoscopic OCT

Fiber-form optics extends the high-resolution tomographic imaging capabilities of optical coherence tomography (OCT) to the inside of the human body, i.e., endoscopic OCT. However, it still faces challenges due to the trade-off between probe size, resolution, and depth of focus (DOF). Here we introduce a method for extending the DOF in endoscopic OCT with high uniformity and efficiency. On the basis of multi-level diffractive optics, we leverage the multi-dimensional light-field modulation capabilities of computer-generated holography (CGH) to achieve precise control of the intensity distribution of the off-axis portion of the OCT probe light. Our method eliminates the need for an objective lens, allowing for direct fabrication at the distal facet of a single-mode fiber using femtosecond laser two-photon 3D printing. The superiority of our method has been verified through numerical simulation, beam measurement, and imaging results obtained with our home-built endoscopic OCT system.

Design and Development of Metasurface Materials for Enhancing Photodetector Properties

Recently, metasurface-based photodetectors (metaphotodetectors) have been developed and applied in various fields. Metasurfaces are artificial materials with unique properties that have emerged over the past decade, and photodetectors are powerful tools used to quantify incident electromagnetic wave information by measuring changes in the conductivity of irradiated materials. Through an efficient microstructural design, metasurfaces can effectively regulate numerous characteristics of electromagnetic waves and have demonstrated unique advantages in various fields, including holographic projection, stealth, biological image enhancement, biological sensing, and energy absorption applications. Photodetectors play a crucial role in military and civilian applications; therefore, efficient photodetectors are essential for optical communications, imaging technology, and spectral analysis. Metaphotodetectors have considerably improved sensitivity and noise-equivalent power and miniaturization over conventional photodetectors. This review summarizes the advantages of metaphotodetectors based on five aspects. Furthermore, the applications of metaphotodetectors in various fields including military and civil applications, are systematically discussed. It highlights the potential future applications and developmental trends of metasurfaces in metaphotodetectors, provides systematic guidance for their development, and establishes metasurfaces as a promising technology.

Multimodal mechano-microscopy reveals mechanical phenotypes of breast cancer spheroids in three dimensions

Cancer cell invasion relies on an equilibrium between cell deformability and the biophysical constraints imposed by the extracellular matrix (ECM). However, there is little consensus on the nature of the local biomechanical alterations in cancer cell dissemination in the context of three-dimensional (3D) tumor microenvironments (TMEs). While the shortcomings of two-dimensional (2D) models in replicating in situ cell behavior are well known, 3D TME models remain underutilized because contemporary mechanical quantification tools are limited to surface measurements. Here, we overcome this major challenge by quantifying local mechanics of cancer cell spheroids in 3D TMEs. We achieve this using multimodal mechano-microscopy, integrating optical coherence microscopy-based elasticity imaging with confocal fluorescence microscopy. We observe that non-metastatic cancer spheroids show no invasion while showing increased peripheral cell elasticity in both stiff and soft environments. Metastatic cancer spheroids, however, show ECM-mediated softening in a stiff microenvironment and, in a soft environment, initiate cell invasion with peripheral softening associated with early metastatic dissemination. This exemplar of live-cell 3D mechanotyping supports that invasion increases cell deformability in a 3D context, illustrating the power of multimodal mechano-microscopy for quantitative mechanobiology in situ.

Advances of surgical robotics: image-guided classification and application

Surgical robotics application in the field of minimally invasive surgery has developed rapidly and has been attracting increasingly more research attention in recent years. A common consensus has been reached that surgical procedures are to become less traumatic and with the implementation of more intelligence and higher autonomy, which is a serious challenge faced by the environmental sensing capabilities of robotic systems. One of the main sources of environmental information for robots are images, which are the basis of robot vision. In this review article, we divide clinical image into direct and indirect based on the object of information acquisition, and into continuous, intermittent continuous, and discontinuous according to the target-tracking frequency. The characteristics and applications of the existing surgical robots in each category are introduced based on these two dimensions. Our purpose in conducting this review was to analyze, summarize, and discuss the current evidence on the general rules on the application of image technologies for medical purposes. Our analysis gives insight and provides guidance conducive to the development of more advanced surgical robotics systems in the future.

PneumaOCT: Pneumatic optical coherence tomography endoscopy for targeted distortion-free imaging in tortuous and narrow internal lumens

The complex anatomy of internal luminal organs, like bronchioles, poses challenges for endoscopic optical coherence tomography (OCT). These challenges include limited steerability for targeted imaging and nonuniform rotation distortion (NURD) with proximal scanning. Using rotary micromotors for distal scanning could address NURD but raises concerns about electrical safety and costs. We present pneumaOCT, the first pneumatic OCT endoscope, comprising a steerable catheter with a soft pneumatic actuator and an imaging probe with a miniature pneumatic turbine. With a diameter of 2.8 mm, pneumaOCT allows for a bending angle of up to 237°, facilitating navigation through narrow turns. The pneumatic turbine enables adjustable imaging speeds from 51 to 446 revolutions per second. We demonstrate the pneumaOCT in vivo imaging of mouse esophagus and colon, as well as targeted and distortion-free imaging of peripheral bronchioles in a bronchial phantom and a porcine lung. This advancement substantially improves endoscopic OCT for navigational imaging in curved and narrow lumens.

Advances in Multifunctional Electronic Catheters for Precise and Intelligent Diagnosis and Therapy in Minimally Invasive Surgery

The advent of catheter-based minimally invasive surgical instruments has provided an effective means of diagnosing and treating human disease. However, conventional medical catheter devices are limited in functionalities, hindering their ability to gather tissue information or perform precise treatment during surgery. Recently, electronic catheters have integrated various sensing and therapeutic technologies through micro/nanoelectronics, expanding their capabilities. As micro/nanoelectronic devices become more miniaturized, flexible, and stable, electronic surgical catheters are evolving from simple tools to multiplexed sensing and theranostics for surgical applications. The review on multifunctional electronic surgical catheters is lacking and thus is not conducive to the reader's comprehensive understanding of the development trend in this field. This review covers the advances in multifunctional electronic catheters for precise and intelligent diagnosis and therapy in minimally invasive surgery. It starts with the summary of clinical minimally invasive surgical instruments, followed by the background of current clinical catheter devices for sensing and therapeutic applications. Next, intelligent electronic catheters with integrated electronic components are reviewed in terms of electronic catheters for diagnosis, therapy, and multifunctional applications. It highlights the present status and development potential of catheter-based minimally invasive surgical devices, while also illustrating several significant challenges that remain to be overcome.

Label-Free Optical Technologies to Enhance Noninvasive Endoscopic Imaging of Early-Stage Cancers

White light endoscopic imaging allows for the examination of internal human organs and is essential in the detection and treatment of early-stage cancers. To facilitate diagnosis of precancerous changes and early-stage cancers, label-free optical technologies that provide enhanced malignancy-specific contrast and depth information have been extensively researched. The rapid development of technology in the past two decades has enabled integration of these optical technologies into clinical endoscopy. In recent years, the significant advantages of using these adjunct optical devices have been shown, suggesting readiness for clinical translation. In this review, we provide an overview of the working principles and miniaturization considerations and summarize the clinical and preclinical demonstrations of several such techniques for early-stage cancer detection. We also offer an outlook for the integration of multiple technologies and the use of computer-aided diagnosis in clinical endoscopy.

Compact biologically inspired camera with computational compound eye

The growing interests have been witnessed in the evolution and improvement of artificial compound eyes (CE) inspired by arthropods. However, the existing CE cameras are suffering from a defocusing problem due to the incompatibility with commercial CMOS cameras. Inspired by the CEs of South American Shrimps, we report a compact biologically inspired camera that enables wide-field-of-view (FOV), high-resolution imaging and sensitive 3D moving trajectory reconstruction. To overcome the defocusing problem, a deep learning architecture with distance regulation is proposed to achieve wide-range-clear imaging, without any hardware or complex front-end design, which greatly reduces system complexity and size. The architecture is composed of a variant of Unet and Pyramid-multi-scale attention, with designed short, middle and long distance regulation. Compared to the current competitive well-known models, our method is at least 2 dB ahead. Here we describe the high-resolution computational-CE camera with 271 ommatidia, with a weight of 5.4 g an area of 3 × 3 cm2 and 5-mm thickness, which achieves compatibility and integration of CE with commercial CMOS. The experimental result illustrates this computational-CE camera has competitive advantages in enhanced resolution and sensitive 3D live moving trajectory reconstruction. The compact camera has promising applications in nano-optics fields such as medical endoscopy, panoramic imaging and vision robotics.

Honeycomb effect elimination in differential phase fiber-bundle-based endoscopy

Fiber-bundle-based endoscopy, with its ultrathin probe and micrometer-level resolution, has become a widely adopted imaging modality for in vivo imaging. However, the fiber bundles introduce a significant honeycomb effect, primarily due to the multi-core structure and crosstalk of adjacent fiber cores, which superposes the honeycomb pattern image on the original image. To tackle this issue, we propose an iterative-free spatial pixel shifting (SPS) algorithm, designed to suppress the honeycomb effect and enhance real-time imaging performance. The process involves the creation of three additional sub-images by shifting the original image by one pixel at 0, 45, and 90 degree angles. These four sub-images are then used to compute differential maps in the x and y directions. By performing spiral integration on these differential maps, we reconstruct a honeycomb-free image with improved details. Our simulations and experimental results, conducted on a self-built fiber bundle-based endoscopy system, demonstrate the effectiveness of the SPS algorithm. SPS significantly improves the image quality of reflective objects and unlabeled transparent scattered objects, laying a solid foundation for biomedical endoscopic applications.

Mechanical-scan-free multicolor super-resolution imaging with diffractive spot array illumination

Point-scanning microscopy approaches are transforming super-resolution imaging. Despite achieving parallel high-speed imaging using multifocal techniques, efficient multicolor imaging methods with high-quality illumination are currently lacking. In this paper, we present for the first time Mechanical-scan-free multiColor Super-resolution Microscopy (MCoSM) with spot array illumination, which enables mechanical-scan-free super-resolution imaging with adjustable resolution and a good effective field-of-view based on spatial light modulators. Through 100-2,500 s super-resolution spot illumination with different effective fields of view for imaging, we demonstrate the adjustable capacity of MCoSM. MCoSM extends existing spectral imaging capabilities through a time-sharing process involving different color illumination with phase-shift scanning while retaining the spatial flexibility of super-resolution imaging with diffractive spot array illumination. To demonstrate the prospects of MCoSM, we perform four-color imaging of fluorescent beads at high resolution. MCoSM provides a versatile platform for studying molecular interactions in complex samples at the nanoscale level.

In Vivo Intelligent Fluorescence Endo-Microscopy by Varifocal Meta-Device and Deep Learning

Endo-microscopy is crucial for real-time 3D visualization of internal tissues and subcellular structures. Conventional methods rely on axial movement of optical components for precise focus adjustment, limiting miniaturization and complicating procedures. Meta-device, composed of artificial nanostructures, is an emerging optical flat device that can freely manipulate the phase and amplitude of light. Here, an intelligent fluorescence endo-microscope is developed based on varifocal meta-lens and deep learning (DL). The breakthrough enables in vivo 3D imaging of mouse brains, where varifocal meta-lens focal length adjusts through relative rotation angle. The system offers key advantages such as invariant magnification, a large field-of-view, and optical sectioning at a maximum focal length tuning range of ≈2 mm with 3 µm lateral resolution. Using a DL network, image acquisition time and system complexity are significantly reduced, and in vivo high-resolution brain images of detailed vessels and surrounding perivascular space are clearly observed within 0.1 s (≈50 times faster). The approach will benefit various surgical procedures, such as gastrointestinal biopsies, neural imaging, brain surgery, etc.

Multiplexed manipulation of orbital angular momentum and wavelength in metasurfaces based on arbitrary complex-amplitude control

Due to its unbounded and orthogonal modes, the orbital angular momentum (OAM) is regarded as a key optical degree of freedom (DoF) for future information processing with ultra-high capacity and speed. Although the manipulation of OAM based on metasurfaces has brought about great achievements in various fields, such manipulation currently remains at single-DoF level, which means the multiplexed manipulation of OAM with other optical DoFs is still lacking, greatly hampering the application of OAM beams and advancement of metasurfaces. In order to overcome this challenge, we propose the idea of multiplexed coherent pixel (MCP) for metasurfaces. This approach enables the manipulation of arbitrary complex-amplitude under incident lights of both plane and OAM waves, on the basis of which we have realized the multiplexed DoF control of OAM and wavelength. As a result, the MCP method expands the types of incident lights which can be simultaneously responded by metasurfaces, enriches the information processing capability of metasurfaces, and creates applications of information encryption and OAM demultiplexer. Our findings not only provide means for the design of high-security and high-capacity metasurfaces, but also raise the control and application level of OAM, offering great potential for multifunctional nanophotonic devices in the future.

Metaoptics for aberration correction in microendoscopy

Compact and minimally invasive scanning fiber endoscopy probes with micron-level resolution have great potential in detailed tissue interrogation and early disease diagnosis, which are key applications of confocal reflectance imaging at visible wavelengths. State-of-the-art imaging probes commonly employ refractive lens triplets or gradient refractive index (GRIN) lenses as the micro-objective. However, off-axis aberration emerges as a critical factor affecting resolution, especially at the extremities of the imaging field. In response to this challenge, we propose what we believe to be a novel design integrating a metasurface with the GRIN micro-objective to address optical aberrations during beam scan. The metasurface acts as a corrector element for optical aberrations in a fiber-scanning endoscope using the same fiber for excitation and collection. Modeling such hybrid refractive-metasurface designs requires the coupling of simulation techniques across macroscale and nanoscale optics, for which we used an Ansys simulation workflow platform. Operating at a wavelength of 644 nm, this metaoptical element serves as a thin and compact aberration correction surface, ensuring uniform resolution across the entire imaging field. Experimental results from our scanning fiber endoscopy system demonstrate a notable enhancement in optical performance both on-axis and off-axis, achieving a resolution of 3 µm at the center of the imaging field. Impressively, the resolution experiences only a modest degradation by a factor of 0.13 at the edge of the field of view compared to the center.

Metasurface- and PCSEL-Based Structured Light for Monocular Depth Perception and Facial Recognition

The novel depth-sensing system presented here revolutionizes structured light (SL) technology by employing metasurfaces and photonic crystal surface-emitting lasers (PCSELs) for efficient facial recognition in monocular depth-sensing. Unlike conventional dot projectors relying on diffractive optical elements (DOEs) and collimators, our system projects approximately 45,700 infrared dots from a compact 297-μm-dimention metasurface, drastically more spots (1.43 times) and smaller (233 times) than the DOE-based dot projector in an iPhone. With a measured field-of-view (FOV) of 158° and a 0.611° dot sampling angle, the system is lens-free and lightweight and boasts lower power consumption than vertical-cavity surface-emitting laser (VCSEL) arrays, resulting in a 5-10 times reduction in power. Utilizing a GaAs-based metasurface and a simplified optical architecture, this innovation not only addresses the drawbacks of traditional SL depth-sensing but also opens avenues for compact integration into wearable devices, offering remarkable advantages in size, power efficiency, and potential for widespread adoption.

Flexible Metasurfaces for Multifunctional Interfaces

Optical metasurfaces, capable of manipulating the properties of light with a thickness at the subwavelength scale, have been the subject of extensive investigation in recent decades. This research has been mainly driven by their potential to overcome the limitations of traditional, bulky optical devices. However, most existing optical metasurfaces are confined to planar and rigid designs, functions, and technologies, which greatly impede their evolution toward practical applications that often involve complex surfaces. The disconnect between two-dimensional (2D) planar structures and three-dimensional (3D) curved surfaces is becoming increasingly pronounced. In the past two decades, the emergence of flexible electronics has ushered in an emerging era for metasurfaces. This review delves into this cutting-edge field, with a focus on both flexible and conformal design and fabrication techniques. Initially, we reflect on the milestones and trajectories in modern research of optical metasurfaces, complemented by a brief overview of their theoretical underpinnings and primary classifications. We then showcase four advanced applications of optical metasurfaces, emphasizing their promising prospects and relevance in areas such as imaging, biosensing, cloaking, and multifunctionality. Subsequently, we explore three key trends in optical metasurfaces, including mechanically reconfigurable metasurfaces, digitally controlled metasurfaces, and conformal metasurfaces. Finally, we summarize our insights on the ongoing challenges and opportunities in this field.

Multifocal meta-fiber based on the fractional Talbot effect

Multi-focusing of light is a crucial capability for photonic devices that can be effectively achieved by precisely modulating the phase delay on the incident wavefront. However, integrating functional structures into optical fibers for remote light focusing remains challenging due to the complex device design and limited fabrication approaches. Here, we present the design and fabrication of metalens array on the end-face of a tailored single-mode step-index fiber for focusing light field into closely packed focal spot array. The metalenses are configured based on the fractional Talbot effect and benefit a modular design capability. Light passing through the optical fiber can be focused into different focal planes. With a synergistic 3D laser nanoprinting technique based on two-photon polymerization, high-quality meta-fibers are demonstrated for focusing light parallelly with a uniform numerical aperture (NA) as high as approximately 0.77. This may facilitate various applications such as optical trapping, generation of sophisticated beam profiles, and boosting light coupling efficiencies.

Single-shot deterministic complex amplitude imaging with a single-layer metalens

Conventional imaging systems can only capture light intensity. Meanwhile, the lost phase information may be critical for a variety of applications such as label-free microscopy and optical metrology. Existing phase retrieval techniques typically require a bulky setup, multiframe measurements, or prior information of the target scene. Here, we proposed an extremely compact system for complex amplitude imaging, leveraging the extreme versatility of a single-layer metalens to generate spatially multiplexed and polarization phase-shifted point spread functions. Combining the metalens with a polarization camera, the system can simultaneously record four polarization shearing interference patterns along both in-plane directions, thus allowing the deterministic reconstruction of the complex amplitude light field in a single shot. Using an incoherent light-emitting diode as the illumination, we experimentally demonstrated speckle-noise-free complex amplitude imaging for both static and moving objects with tailored magnification ratio and field of view. The miniaturized and robust system may open the door for complex amplitude imaging in portable devices for point-of-care applications.

The LMIT: Light-mediated minimally-invasive theranostics in oncology

Minimally-invasive diagnosis and therapy have gradually become the trend and research hotspot of current medical applications. The integration of intraoperative diagnosis and treatment is a development important direction for real-time detection, minimally-invasive diagnosis and therapy to reduce mortality and improve the quality of life of patients, so called minimally-invasive theranostics (MIT). Light is an important theranostic tool for the treatment of cancerous tissues. Light-mediated minimally-invasive theranostics (LMIT) is a novel evolutionary technology that integrates diagnosis and therapeutics for the less invasive treatment of diseased tissues. Intelligent theranostics would promote precision surgery based on the optical characterization of cancerous tissues. Furthermore, MIT also requires the assistance of smart medical devices or robots. And, optical multimodality lay a solid foundation for intelligent MIT. In this review, we summarize the important state-of-the-arts of optical MIT or LMIT in oncology. Multimodal optical image-guided intelligent treatment is another focus. Intraoperative imaging and real-time analysis-guided optical treatment are also systemically discussed. Finally, the potential challenges and future perspectives of intelligent optical MIT are discussed.

Superhydrophobic Multifocal Microlens Array with Depth-of-Field Detection for a Humid Environment

Microlens array (MLA) has been widely applied in augmented reality and optical imaging. When used in a humid environment or medical endoscopy, MLA needs to be both superhydrophobic and multifocal. However, it is not easy to achieve both superhydrophobic and multifocal function by integrating superhydrophobic and multifocal structures on the same surface by means of a simple, efficient, and precise method. In this paper, the superhydrophobic multifocal MLA with superhydrophobic properties and multifocal functions is successfully designed for preparation based on a method of 3D lithography and soft lithography. The 3D lithography can further help the preparation of a multifocal MLA with varying apertures and a multistep superhydrophobic structure with a round dome. The superhydrophobic multifocal MLA with periods 50 and 120 μm has perfect superhydrophobic property. The water droplet can slide and bounce off the surface at a roll angle of less than 12.9° with both multifocal and integrated imaging function, as well as up to 397 μm depth-of-field (DOF) detection range; this greatly exceeds the conventional MLA. The perfect superhydrophobic and optical property can be achieved in an extremely humid environment. The superhydrophobic multifocal MLA proposed in this paper has a promising prospect for actual practices.

Neural network assisted high-spatial-resolution polarimetry with non-interleaved chiral metasurfaces

Polarimetry plays an indispensable role in modern optics. Nevertheless, the current strategies generally suffer from bulky system volume or spatial multiplexing scheme, resulting in limited performances when dealing with inhomogeneous polarizations. Here, we propose a non-interleaved, interferometric method to analyze the polarizations based on a tri-channel chiral metasurface. A deep convolutional neural network is also incorporated to enable fast, robust and accurate polarimetry. Spatially uniform and nonuniform polarizations are both measured through the metasurface experimentally. Distinction between two semblable glasses is also demonstrated. Our strategy features the merits of compactness and high spatial resolution, and would inspire more intriguing design for detecting and sensing.

Intravascular Optical Coherence Tomography Utilizing a Miniature Piezoelectric-Driven Probe

Intravascular optical coherence tomography (IV-OCT) is crucial for evaluating lumen dimensions and guiding interventional procedures. However, traditional catheter-based IV-OCT faces challenges in achieving precise and full-field 360° imaging in tortuous vessels. Current IV-OCT catheters that employ proximal actuators and torque coils are susceptible to non-uniform rotational distortion (NURD) in tortuous vessels, while distal micromotor-driven catheters struggle with complete 360° imaging due to wiring artifacts. In this study, we developed a miniature optical scanning probe with an integrated piezoelectric-driven fiber optic slip ring (FOSR) to facilitate smooth navigation and precise imaging within tortuous vessels. The FOSR features a coil spring-wrapped optical lens serving as a rotor, enabling efficient 360° optical scanning. The structurally-and-functionally-integrated design significantly streamlines the probe (with a diameter of 0.85 mm and a length of 7 mm) while maintaining an excellent rotational speed of 10,000 rpm. High-precision 3D printing technology ensures accurate optical alignment of the fiber and lens inside the FOSR, with a maximum insertion loss variation of 2.67 dB during probe rotation. Finally, a vascular model demonstrated smooth probe insertion into the carotid artery, and imaging of oak leaf, metal rod phantoms, and ex vivo porcine vessels verified its capabilities for precise optical scanning, comprehensive 360° imaging, and artifact elimination. The FOSR probe exhibits small size, rapid rotation, and optical precision scanning, rendering it exceptionally promising for cutting-edge intravascular optical imaging techniques.

Highly robust performance of a compact, wide-angle, nano-optic capsule endoscopy camera

The performance of capsule endoscopy, which plays an important role in noninvasive medical diagnostics, has been limited by aberrations and large optical sizes caused by several traditional lenses. We propose a capsule endoscopy camera based on a metalens that distinguishes it from existing technologies in three aspects. First, the camera achieved a high FOV of 160°, enabling a comprehensive examination of internal organs. Second, we achieved a compact design with an optical diameter of 1.6 mm and a length of 1.4 mm to enhance patient comfort. The attainment of exceptional image quality with an MTF of more than 45% at 300 lp/mm is the third advantage of this camera. The theoretical performance of this innovative approach shows great potential to improve diagnostic capabilities.

Broadband achromatic and wide field-of-view single-layer metalenses in the mid-infrared

Metalenses are considered a promising solution for miniaturizing numerous optical systems due to their light weight, ultrathin thickness and compact size. However, it remains a challenge for metalenses to achieve both wide field-of-view and broadband achromatic imaging. In this work, a single-layer achromatic metalens with a wide field-of-view of 160° in the 3800 nm-4200 nm band is designed and analyzed. The quadratic phase profile of the metalens and the propagation phase of each meta-atom are used to increase the field-of-view and compensate for chromatic aberration, respectively. In addition, the metalens is capable of transverse achromatic imaging. The design can be extended to other optical frequencies, which is promising for applications in unmanned vehicles, infrared detection, etc.

A super-high brightness and excellent colour quality laser-driven white light source enables miniaturized endoscopy

A laser-driven white light source promises intrinsic advantages for miniaturized endoscopic illumination. However, it remains a great challenge to simultaneously achieve high brightness and excellent colour rendition due to the shortage of highly efficient and thermally robust red-emitting laser phosphor converters. Here, we designed CaAlSiN3:Eu@Al (CASN@Al) converters with neglectable efficiency loss by tightly bonding all-inorganic phosphor films on an aluminium substrate. A layer-by-layer phosphor converter (LuAG/CASN@Al), i.e., stacking a green-emitting Lu3Al5O12:Ce (LuAG) layer on CASN@Al, was constructed to enhance light conversion efficiency and reduce reabsorption loss under blue laser excitation, which thus produces an excellent white light source with a luminous efficacy of 258 lm W-1 and a colour rendering index of 91. A miniaturized endoscopy with a coupling efficiency twice that of the commercial white LEDs was demonstrated by using the laser-driven white light and showed a central illuminance as high as 52 730 lx, more vivid images and long-term reliability.

Miniature Two-Photon Microscopic Imaging Using Dielectric Metalens

Miniature two-photon microscopy has emerged as a powerful technique for investigating brain activity in freely moving animals. Ongoing research objectives include reducing probe weight and minimizing animal behavior constraints caused by probe attachment. Employing dielectric metalenses, which enable the use of sizable optical components in flat device structures while maintaining imaging resolution, is a promising solution for addressing these challenges. In this study, we designed and fabricated a titanium dioxide metalens with a wavelength of 920 nm and a high aspect ratio. Furthermore, a meta-optic two-photon microscope weighing 1.36 g was developed. This meta-optic probe has a lateral resolution of 0.92 μm and an axial resolution of 18.08 μm. Experimentally, two-photon imaging of mouse brain structures in vivo was also demonstrated. The flat dielectric metalens technique holds promising opportunities for high-performance integrated miniature nonlinear microscopy and endomicroscopy platforms in the biomedical field.

Large field-of-view short-wave infrared metalens for scanning fiber endoscopy

SIGNIFICANCE

The scanning fiber endoscope (SFE), an ultrasmall optical imaging device with a large field-of-view (FOV) for having a clear forward view into the interior of blood vessels, has great potential in the cardiovascular disease diagnosis and surgery assistance, which is one of the key applications for short-wave infrared biomedical imaging. The state-of-the-art SFE system uses a miniaturized refractive spherical lens doublet for beam projection. A metalens is a promising alternative that can be made much thinner and has fewer off-axis aberrations than its refractive counterpart.

AIM

We demonstrate a transmissive metalens working at 1310 nm for a forward viewing endoscope to achieve a shorter device length and better resolution at large field angles.

APPROACH

We optimize the metalens of the SFE system using Zemax, fabricate it using e-beam lithography, characterize its optical performances, and compare them with the simulations.

RESULTS

The SFE system has a resolution of ∼ 140    μ m at the center of field (imaging distance 15 mm), an FOV of ∼ 70    deg , and a depth-of-focus of ∼ 15    mm , which are comparable with a state-of-the-art refractive lens SFE. The use of the metalens reduces the length of the optical track from 1.2 to 0.86 mm. The resolution of our metalens-based SFE drops by less than a factor of 2 at the edge of the FOV, whereas the refractive lens counterpart has a ∼ 3 times resolution degradation.

CONCLUSIONS

These results show the promise of integrating a metalens into an endoscope for device minimization and optical performance improvement.

Miniature Probe for Optomechanical Focus-Adjustable Optical-Resolution Photoacoustic Endoscopy

Photoacoustic microscopy (PAM) is a promising imaging modality because it is able to reveal optical absorption contrast in high resolution on the order of a micrometer. It can be applied in an endoscopic approach by implementing PAM into a miniature probe, termed photoacoustic endoscopy (PAE). Here we develop a miniature focus-adjustable PAE (FA-PAE) probe characterized by both high resolution (in micrometers) and large depth of focus (DOF) via a novel optomechanical design for focus adjustment. To realize high resolution and large DOF in a miniature probe, a 2-mm plano-convex lens is specially adopted, and the mechanical translation of a single-mode fiber is meticulously designed to allow the use of multi-focus image fusion (MIF) for extended DOF. Compared with existing PAE probes, our FA-PAE probe achieves high resolution of [Formula: see text] within unprecedentedly large DOF of 3.2 mm, more than 27 times the DOF of the probe without performing focus adjustment for MIF. The superior performance is first demonstrated by imaging both phantoms and animals including mice and zebrafish in vivo by linear scanning. Further, in vivo endoscopic imaging of a rat's rectum by rotary scanning of the probe is conducted to showcase the capability of adjustable focus. Our work opens new perspectives for PAE biomedical applications.

Single chip simultaneous chiral and achiral imaging based on high efficiency 3D plasmonic metalens

We propose and experimentally demonstrate a single chip metasurface for simultaneous chiral and achiral imaging and polarimetric detecting using a high efficiency three dimensional plasmonic metalens (3D-PM) with capability of designed separation of different circular polarizations. The proposed 3D-PM combines both propagating and geometric phases so that two orthogonal circular polarization components of the incidence can be precisely separated and imaged into two channels and the incident polarization state can be detected with differentiation of the two channels. One single set of an array of Au layer covered anisotropic polymethyl methacrylate elliptical nanopillars is employed, in which height of each nanopillar is added as a new design degree of freedom to realize both full phase manipulation (0-2π) and high efficiency (>0.85) with coupled equivalent Fabry-Pérot cavity and localized surface plasmons. At design wavelength of 1550 nm, experimental results show that optical resolution of both chiral and achiral images approaches the diffraction limit, extinction ratio of circular polarizations in two channels is ∼33:1, and the energy efficiency reaches ∼63 %. The proposed 3D-PM provides a new and simple way for chiral/achiral imaging and polarimetric measurement, and can be applied in integrated optics, optical communication, and biomolecule detection.

Surgical polarimetric endoscopy for the detection of laryngeal cancer

The standard-of-care for the detection of laryngeal pathologies involves distinguishing suspicious lesions from surrounding healthy tissue via contrasts in colour and texture captured by white-light endoscopy. However, the technique is insufficiently sensitive and thus leads to unsatisfactory rates of false negatives. Here we show that laryngeal lesions can be better detected in real time by taking advantage of differences in the light-polarization properties of cancer and healthy tissues. By measuring differences in polarized-light retardance and depolarization, the technique, which we named 'surgical polarimetric endoscopy' (SPE), generates about one-order-of-magnitude greater contrast than white-light endoscopy, and hence allows for the better discrimination of cancerous lesions, as we show with patients diagnosed with squamous cell carcinoma. Polarimetric imaging of excised and stained slices of laryngeal tissue indicated that changes in the retardance of polarized light can be largely attributed to architectural features of the tissue. We also assessed SPE to aid routine transoral laser surgery for the removal of a cancerous lesion, indicating that SPE can complement white-light endoscopy for the detection of laryngeal cancer.

Ultraviolet metasurface-assisted photoacoustic microscopy with great enhancement in DOF for fast histology imaging

Pathology interpretations of tissue rely on the gold standard of histology imaging, potentially hampering timely access to critical information for diagnosis and management of neoplasms because of tedious sample preparations. Slide-free capture of cell nuclei in unprocessed specimens without staining is preferable; however, inevitable irregular surfaces in fresh tissues results in limitations. An ultraviolet metasurface with the ability to generate an ultraviolet optical focus maintaining < 1.1-µm in lateral resolution and ∼290 µm in depth of field (DOF) is proposed for fast, high resolution, label-free photoacoustic histological imaging of unprocessed tissues with uneven surfaces. Microanatomical characteristics of the cell nuclei can be observed, as demonstrated by the mouse brain samples that were cut by hand and a ∼3 × 3-mm2 field of view was imaged in ∼27 min. Therefore, ultraviolet metasurface-assisted photoacoustic microscopy is anticipated to benefit intraoperative pathological assessments and basic scientific research by alleviating laborious tissue preparations.

Real-time full-color meta fiber endoscopy

The remarkable capacity of metasurfaces to exert precise control over the propagation of light has ushered in a realm of unprecedented possibilities for "Lab-on-fiber", and in this work, showcased real-time full-color imaging in a meta-optical fiber endoscope.

Dielectric metasurfaces for next-generation optical biosensing: a comparison with plasmonic sensing

In the past decades, nanophotonic biosensors have been extended from the extensively studied plasmonic platforms to dielectric metasurfaces. Instead of plasmonic resonance, dielectric metasurfaces are based on Mie resonance, and provide comparable sensitivity with superior resonance bandwidth, Q factor, and figure-of-merit. Although the plasmonic photothermal effect is beneficial in many biomedical applications, it is a fundamental limitation for biosensing. Dielectric metasurfaces solve the ohmic loss and heating problems, providing better repeatability, stability, and biocompatibility. We review the high-Q resonances based on various physical phenomena tailored by meta-atom geometric designs, and compare dielectric and plasmonic metasurfaces in refractometric, surface-enhanced, and chiral sensing for various biomedical and diagnostic applications. Departing from conventional spectral shift measurement using spectrometers, imaging-based and spectrometer-less biosensing are highlighted, including single-wavelength refractometric barcoding, surface-enhanced molecular fingerprinting, and integrated visual reporting. These unique modalities enabled by dielectric metasurfaces point to two important research directions. On the one hand, hyperspectral imaging provides massive information for smart data processing, which not only achieve better biomolecular sensing performance than conventional ensemble averaging, but also enable real-time monitoring of cellular or microbial behaviour in physiological conditions. On the other hand, a single metasurface can integrate both functions of sensing and optical output engineering, using single-wavelength or broadband light sources, which provides simple, fast, compact, and cost-effective solutions. Finally, we provide perspectives in future development on metasurface nanofabrication, functionalization, material, configuration, and integration, towards next-generation optical biosensing for ultra-sensitive, portable/wearable, lab-on-a-chip, point-of-care, multiplexed, and scalable applications.

Design of high-efficiency and large-angle homo-metagratings for light source integration

Meta-optics integrated with light sources has gained significant attention. However, most focused on the efficiency of metasurfaces themselves, rather than the efficiency of integration. To design highly efficient beam deflection, we develop a scheme of homo-metagrating, involving the same material for meta-atoms, substrate, and top layer of the laser, to achieve near-unity power from light-emitting to metasurfaces. We utilize three degrees of freedom: overall add-on phase, parameters of meta-atoms in a period, and lattice arrangement. The overall efficiency of homo-metagratings is higher than that of hetero-metagratings. We believe our approach is capable of being implemented in various ultracompact optic systems.

Integrated metasurfaces for re-envisioning a near-future disruptive optical platform

Metasurfaces have been continuously garnering attention in both scientific and industrial fields, owing to their unprecedented wavefront manipulation capabilities using arranged subwavelength artificial structures. To date, research has mainly focused on the full control of electromagnetic characteristics, including polarization, phase, amplitude, and even frequencies. Consequently, versatile possibilities of electromagnetic wave control have been achieved, yielding practical optical components such as metalenses, beam-steerers, metaholograms, and sensors. Current research is now focused on integrating the aforementioned metasurfaces with other standard optical components (e.g., light-emitting diodes, charged-coupled devices, micro-electro-mechanical systems, liquid crystals, heaters, refractive optical elements, planar waveguides, optical fibers, etc.) for commercialization with miniaturization trends of optical devices. Herein, this review describes and classifies metasurface-integrated optical components, and subsequently discusses their promising applications with metasurface-integrated optical platforms including those of augmented/virtual reality, light detection and ranging, and sensors. In conclusion, this review presents several challenges and prospects that are prevalent in the field in order to accelerate the commercialization of metasurfaces-integrated optical platforms.

Full-Stokes parameters detection enabled by a non-interleaved fiber-compatible metasurface

Polarization of the optical field determines the way of light-matter interaction, which lays the foundation for various applications such as chiral spectroscopy, biomedical imaging, and machine vision. Currently, with the rise of the metasurface, miniaturized polarization detectors have attracted extensive interest. However, due to the limitation of the working area, it is still a challenge to integrate polarization detectors on the fiber end face. Here, we propose a design of compact non-interleaved metasurface that can be integrated on the tip of a large-mode-area photonic crystal fiber (LMA-PCF) to realize full-Stokes parameters detection. Through concurrent control over the dynamic phase and Pancharatnam-Berry (PB) phase, different helical phases are assigned to the two orthogonal circular polarization bases, of which the amplitude contrast and relative phase difference can be represented by two non-overlapped foci and an interference ring pattern, respectively. Therefore, the determination of arbitrary polarization states through the proposed ultracompact fiber-compatible metasurface can be achieved. Moreover, we calculated full-Stokes parameters according to simulation results and obtained that the average detection deviation is relatively low at 2.84% for 20 elucidated samples. The novel metasurface exhibits excellent polarization detection performance and overcomes the limitation of the small integrated area, which provides insights into the further practical explorations of ultracompact polarization detection devices.

Ultra-thin light-weight laser-induced-graphene (LIG) diffractive optics

The realization of hybrid optics could be one of the best ways to fulfill the technological requirements of compact, light-weight, and multi-functional optical systems for modern industries. Planar diffractive lens (PDL) such as diffractive lenses, photonsieves, and metasurfaces can be patterned on ultra-thin flexible and stretchable substrates and be conformally attached on top of arbitrarily shaped surfaces. In this review, we introduce recent research works addressed to the design and manufacturing of ultra-thin graphene optics, which will open new markets in compact and light-weight optics for next-generation endoscopic brain imaging, space internet, real-time surface profilometry, and multi-functional mobile phones. To provide higher design flexibility, lower process complexity, and chemical-free process with reasonable investment cost, direct laser writing (DLW) of laser-induced-graphene (LIG) is actively being applied to the patterning of PDL. For realizing the best optical performances in DLW, photon-material interactions have been studied in detail with respect to different laser parameters; the resulting optical characteristics have been evaluated in terms of amplitude and phase. A series of exemplary laser-written 1D and 2D PDL structures have been actively demonstrated with different base materials, and then, the cases are being expanded to plasmonic and holographic structures. The combination of these ultra-thin and light-weight PDL with conventional bulk refractive or reflective optical elements could bring together the advantages of each optical element. By integrating these suggestions, we suggest a way to realize the hybrid PDL to be used in the future micro-electronics surface inspection, biomedical, outer space, and extended reality (XR) industries.

Multiresonant Nonlocal Metasurfaces

Optical metasurfaces supporting localized resonances have become a versatile platform for shaping the wavefront of light, but their low quality (Q-) factor modes inevitably modify the wavefront over extended momentum and frequency space, resulting in limited spectral and angular control. In contrast, periodic nonlocal metasurfaces have been providing great flexibility for both spectral and angular selectivity but with limited spatial control. Here, we introduce multiresonant nonlocal metasurfaces capable of shaping the spatial properties of light using several resonances with widely disparate Q-factors. In contrast to previous designs, the narrowband resonant transmission punctuates a broadband resonant reflection window enabled by a highly symmetric array, achieving simultaneous spectral filtering and wavefront shaping in the transmission mode. Through rationally designed perturbations, we realize nonlocal flat lenses suitable as compact band-pass imaging devices, ideally suited for microscopy. We further employ modified topology optimization to demonstrate high-quality-factor metagratings for extreme wavefront transformations with large efficiency.

Multilayer all-polymer metasurface stacked on optical fiber via sequential micro-punching process

Metasurface technology is revolutionizing the field of optics and pursuing expanded functions via technical developments, such as the integration of multiple metasurfaces with optical fibers. Despite several attempts to realize metasurface-on-fiber platforms, negligible fiber-facet areas pose a serious obstacle to efficient and precise fabrication. Herein, we demonstrate a novel sequential micro-punching process that enables rapid and precise stacking of multiple polymer metasurfaces on the end face of a single-mode optical fiber. Mesh-type nanohole metasurfaces are fabricated on a 1.8-μm-thick polymethyl methacrylate (PMMA) layer via e-beam lithography, and the PMMA layer is separated from the substrate and prepared in the form of a membrane using the external frame. Furthermore, the PMMA metasurfaces are sequentially punched through the fiber and stacked on top. Employing a micro-punching process, we demonstrate highly efficient all-polymer metalenses and orbital angular momentum (OAM) metasurfaces coupled with single-mode fibers operating in the telecommunication band. A 1550 nm laser beam passing through three metalens layers stacked on the fiber is focused at a distance of 135 μm with 83% efficiency. In addition, the 1550 nm beam passing through three OAM metasurfaces on the fiber is converted into a perfect vortex beam with a topological charge of 3. We believe that our proposed micro-punching process will cause a breakthrough in the fabrication of metasurface-integrated optical fibers that will be utilized in a wide range of applications.

A biodegradable, flexible photonic patch for in vivo phototherapy

Diagnostic and therapeutic illumination on internal organs and tissues with high controllability and adaptability in terms of spectrum, area, depth, and intensity remains a major challenge. Here, we present a flexible, biodegradable photonic device called iCarP with a micrometer scale air gap between a refractive polyester patch and the embedded removable tapered optical fiber. ICarP combines the advantages of light diffraction by the tapered optical fiber, dual refractions in the air gap, and reflection inside the patch to obtain a bulb-like illumination, guiding light towards target tissue. We show that iCarP achieves large area, high intensity, wide spectrum, continuous or pulsatile, deeply penetrating illumination without puncturing the target tissues and demonstrate that it supports phototherapies with different photosensitizers. We find that the photonic device is compatible with thoracoscopy-based minimally invasive implantation onto beating hearts. These initial results show that iCarP could be a safe, precise and widely applicable device suitable for internal organs and tissue illumination and associated diagnosis and therapy.

Scannable Dual-Focus Metalens with Hybrid Phase

Metalenses with two foci in the longitudinal or transverse direction, called bifocal or dual-focus metalenses, are promising building blocks in tomography techniques, data storage, and optical tweezers. For practical applications, relative movement between the beam and specimen is required, and beam scanning is highly desirable for high-speed operation without vibration. However, dual-focus metalenses employ a hyperbolic phase that experiences off-axis aberrations, which is not suitable for beam scanning. Here, we demonstrated a scannable dual-focus metalens by employing a new phase called "hybrid phase". The hybrid phase consists of a hyperbolic phase inside and a quadratic phase outside to reduce off-axis aberrations while maintaining a high numerical aperture. We show that the two foci of the scannable dual-focus metalens move together without severe distortion for incident angles of up to 2.5°. Our design easily extends to the case of multifocusing, which is essential for various applications ranging from imaging to manipulation.