Phosphate Adsorption by Silver Nanoparticles-Loaded Activated Carbon derived from Tea Residue

Upcycling of post-consumer polyethylene terephthalate bottles into aluminum-based metal-organic framework adsorbents for efficient orthophosphate removal

2-Phosphonobutane-1,2,4,-tricarboxylic acid (PBTC) is an orthophosphate compound widely used as an antiscalant chemical and corrosion inhibitor in manufacturing. However, PBTC poses persistent environmental concerns due to its stability and resistance to conventional water treatment. In addressing the issues of PBTC in aquatic systems, Al-based metal-organic frameworks (MOFs) have been developed and applied as sustainable adsorbents. The materials are synthesized from terephthalic acid (TPA) linkers derived from upcycling products of post-consumer polyethylene terephthalate (PET) bottles. The PET-derived linker was prepared using alkaline hydrolysis followed by acidification and employed in forming MIL-53 (Al), with a comparative assessment against the corresponding MOFs made from commercial-grade TPA. The structures and properties of the materials were characterized with microscopic and spectroscopic methods. The synthesized adsorbents achieved a phosphate adsorption capacity of 826 mg/g at pH 5, with kinetics fitting a pseudo-second-order model and isotherm patterns aligning with Langmuir, Freundlich, and Sips models, indicative of diverse adsorption on heterogeneous surfaces. The results highlight the role of electrostatic interactions and hydrogen bonding mechanisms in PBTC adsorption. The eco-friendly materials with high adsorption performance offer an innovative route for sustainable waste management and water purification.

Physicochemical properties and performance of non-woody derived biochars for the sustainable removal of aquatic pollutants: A systematic review

Biochar is a carbon-rich material produced from the partial combustion of different biomass residues. It can be used as a promising material for adsorbing pollutants from soil and water and promoting environmental sustainability. Extensive research has been conducted on biochars prepared from different feedstocks used for pollutant removal. However, a comprehensive review of biochar derived from non-woody feedstocks (NWF) and its physiochemical attributes, adsorption capacities, and performance in removing heavy metals, antibiotics, and organic pollutants from water systems needs to be included. This review revealed that the biochars derived from NWF and their adsorption efficiency varied greatly according to pyrolysis temperatures. However, biochars (NWF) pyrolyzed at higher temperatures (400-800 °C) manifested excellent physiochemical and structural attributes as well as significant removal effectiveness against antibiotics, heavy metals, and organic compounds from contaminated water. This review further highlighted why biochars prepared from NWF are most valuable/beneficial for water treatment. What preparatory conditions (pyrolysis temperature, residence time, heating rate, and gas flow rate) are necessary to design a desirable biochar containing superior physiochemical and structural properties, and adsorption efficiency for aquatic pollutants? The findings of this review will provide new research directions in the field of water decontamination through the application of NWF-derived adsorbents.

A comparative study on the treatment of kitchen grey water using microalgae consortia and microalgae-synthesized silver nanoparticles

Comparative study on the potential of microalgae consortia and green-synthesized silver nanoparticles using microalgae (M-AgNP) consortia for the treatment of kitchen grey water was investigated in this study. The microalgae consortia consisting of four species, viz., Chlorella sp., Scenedesmus sp., Coelastrum sp., and Pediastrum sp. were isolated from a local fish pond and the silver nanoparticles were synthesized with the same. Thus, synthesized silver nanoparticles exhibited a distinctive yellowish-brown colour and spherical morphology. Extensive qualitative and quantitative characterization techniques were employed to determine their size and morphology. Both microalgae consortia and M-AgNP were used separately for the treatment of kitchen grey water under experimental conditions. The synthesized silver nanoparticles demonstrated promising potential for domestic wastewater treatment, leading to substantial reductions in various parameters: total dissolved solids (29.6%), conductivity (49.4%), chemical oxygen demand (64.6%), and heavy metals (arsenic-63.5%, zinc-45.6%, cadmium-88%, copper-60.52%, and lead-80.82%). Notably, microalgae exhibited superior removal efficiency for nitrate (83.1%), sulphate (70.3%), and phosphate (96.5%) compared to microalgae-synthesized silver nanoparticles. This study underscores the effective utilization of both microalgae and microalgae-synthesized silver nanoparticles for wastewater treatment applications.

Sustainable adsorbent frameworks based on bio-resourced materials and biodegradable polymers in selective phosphate removal for waste-water remediation

Phosphorus to an optimum extent is an essential nutrient for all living organisms and its scarcity may cause food security, and environmental preservation issues vis-à-vis agroeconomic hurdles. Undesirably excess phosphorus intensifies the eutrophication problem in non-marine water bodies and disrupts the natural nutrient balance of the ecosystem. To overcome such dichotomy, biodegradable polymer-based adsorbents have emerged as a cost-effective and implementable approach in striking a "desired optimum-undesired excess" balance pertaining to phosphate in a sustainable manner. So far, the reports on adopting such adsorbent-approach for wastewater remediation remained largely scattered, unstructured, and poorly correlated. In this background, the contextual review comprehensively discusses the current state-of-the-art in utilizing biodegradable polymeric frameworks as an adsorbent system for phosphate removal and its efficient recovery from the aquatic ecosystem, while highlighting their characteristics-specific functional efficiency vis-à-vis easiness of synthetic and commercial viability. The overview further delves into the sources and environmental ramifications of excessive phosphorus in water bodies and associated mechanistic pathways of phosphorus removal via adsorption, precipitation, and membrane filtration enabled by biodegradable (natural and synthetic) polymeric substrates. Finally, functionality optimization, degradability tuning, and adsorption selectivity of biodegradable polymers are highlighted, while aiming to strike a balance in "removal-recovery-reuse" dynamics of phosphate. Thus, the current review not only paves the way for future exploration of biodegradable polymers in sustainable cost-effective adsorbents for phosphorus removal but also can serve as a guide for researchers dealing with this critical issue.

Study on the adsorption of Zn(II) and Cu(II) in acid mine drainage by fly ash loaded nano-FeS

Aiming at the acid mine drainage (AMD) in zinc, copper and other heavy metals treatment difficulties, severe pollution of soil and water environment and other problems. Through the ultrasonic precipitation method, this study prepared fly ash-loaded nano-FeS composites (nFeS-F). The effects of nFeS-F dosage, pH, stirring rate, reaction time and initial concentration of the solution on the adsorption of Zn(II) and Cu(II) were investigated. The data were fitted by Lagergren first and second-order kinetic equations, Internal diffusion equation, Langmuir and Freundlich isotherm models, and combined with SEM, TEM, FTIR, TGA, and XPS assays to reveal the mechanism of nFeS-F adsorption of Zn(II) and Cu(II). The results demonstrated that: The removal of Zn(II) and Cu(II) by nFeS-F could reach 83.36% and 70.40%, respectively (The dosage was 8 g/L, pH was 4, time was 150 min, and concentration was 100 mg/L). The adsorption process, mainly chemical adsorption, conforms to the Lagergren second-order kinetic equation (R2 = 0.9952 and 0.9932). The adsorption isotherms have a higher fitting degree with the Langmuir model (R2 = 0.9964 and 0.9966), and the adsorption is a monolayer adsorption process. This study can provide a reference for treating heavy metals in acid mine drainage and resource utilization of fly ash.

Silver Nanoparticles: Multifunctional Tool in Environmental Water Remediation

Water pollution is a worldwide environmental and health problem that requires the development of sustainable, efficient, and accessible technologies. Nanotechnology is a very attractive alternative in environmental remediation processes due to the multiple properties that are conferred on a material when it is at the nanometric scale. This present review focuses on the understanding of the structure-physicochemical properties-performance relationships of silver nanoparticles, with the objective of guiding the selection of physicochemical properties that promote greater performance and are key factors in their use as antibacterial agents, surface modifiers, colorimetric sensors, signal amplifiers, and plasmonic photocatalysts. Silver nanoparticles with a size of less than 10 nm, morphology with a high percentage of reactive facets {111}, and positive surface charge improve the interaction of the nanoparticles with bacterial cells and induce a greater antibacterial effect. Adsorbent materials functionalized with an optimal concentration of silver nanoparticles increase their contact area and enhance adsorbent capacity. The use of stabilizing agents in silver nanoparticles promotes selective adsorption of contaminants by modifying the surface charge and type of active sites in an adsorbent material, in addition to inducing selective complexation and providing stability in their use as colorimetric sensors. Silver nanoparticles with complex morphologies allow the formation of hot spots or chemical or electromagnetic bonds between substrate and analyte, promoting a greater amplification factor. Controlled doping with nanoparticles in photocatalytic materials produces improvements in their electronic structural properties, promotes changes in charge transfer and bandgap, and improves and expands their photocatalytic properties. Silver nanoparticles have potential use as a tool in water remediation, where by selecting appropriate physicochemical properties for each application, their performance and efficiency are improved.

Efficient dye adsorption of mesoporous activated carbon from bamboo parenchyma cells by phosphoric acid activation

In order to solve the environmental damage caused by the discharge of dyes as industrial wastewater, the development of efficient and sustainable adsorbents is the key, while most of the previous studies on bamboo parenchyma cells have focused on their microstructural, functional and mechanical properties, and few of the properties in adsorption have been investigated. To evaluate the role of the unique microstructure of bamboo parenchyma cells on adsorption after carbonization and activation, PC-based activated carbon (PPAC) was fabricated by the phosphoric acid activation method and tested for adsorption using methylene blue (MB). The effect of mesoporous structure on MB adsorption was investigated in detail using PPAC-30C impregnated with phosphoric acid at a concentration of 30%. The results showed that the adsorption performance was influenced by single-factor experiments (e.g., pH, activated carbon dosing). The adsorption isotherms and kinetics could conform to the Langmuir model (R2 = 0.983-0.994) and pseudo-second-order kinetic model (R2 = 0.822-0.991) respectively, and the maximum MB adsorption capacity of adsorbent was 576 mg g-1. The adsorption mechanism of MB on PPAC-30C includes physical adsorption, electrostatic attraction, hydrogen bonding, and the π-π conjugation effect, which was dominated by physical adsorption. The results of this study show that PPAC has good application prospects for cationic dye removal.

Aluminium dross waste utilization for phosphate removal and recovery from aqueous environment: Operational feasibility development

The need to minimize eutrophication in water bodies and the shortage of phosphate rock reserves has stimulated the search for sequestration and recovery of phosphate from alternative sources, including wastewater. In this study, aluminium dross (AD), a smelting industry waste/by-product, was converted to high-value material by encapsulation in calcium alginate (Ca-Alg) beads, viz. Ca-Alg-AD and utilized for adsorptive/uptake removal and phosphate recovery from an aqueous environment. Encapsulation of AD in alginate beads solves serious operational difficulties of using raw AD material directly due to density difference constraining efficient contact of AD with pollutants present in water and post-treatment recovery of AD material. The phosphate removal was evaluated in both batch and continuous flow operation modes. The batch adsorption study revealed 96.86% phosphate removal from 10 mg L-1 of initial phosphate concentration in 70 min of optimal contact time. Further, the phosphate removal potential of Ca-Alg-AD beads turned out to be independent of solution pH, with an average of 95.93 ± 1.40 % phosphate removal in the 2-9 pH range. The result reflects phosphate adsorption on Ca-Alg-AD beads following a second-order pseudo-kinetic model. Ca-Alg-AD beads-based adsorption followed Freundlich and Langmuir isotherm models. Further, a continuous packed bed column study revealed a total phosphate adsorption capacity of 1.089 mg g-1. The chemical composition, physical stability, and surface properties of Ca-Alg-AD beads were analyzed by means of state-of-the-art analytical techniques, such as Scanning Electron Microscopy-Energy Dispersive X-ray spectroscopy (SEM-EDX), Fourier Transform Infrared Spectroscopy (FTIR) and thermogravimetry/Differential Thermal Analysis (TG/DTA). These characterization techniques comprehend the mechanism and influence of surface properties and morphology on the phosphate adsorption behaviour, which induce the involvement of multiple mechanisms such as ligand complexation, ion exchange, and electrostatic attraction for phosphate adsorption on Ca-Alg-AD beads.

Adsorption and photodegradation of organic contaminants by silver nanoparticles: isotherms, kinetics, and computational analysis

In view of the widespread and distribution of several classes and types of organic contaminants, increased efforts are needed to reduce their spread and subsequent environmental contamination. Although several remediation approaches are available, adsorption and photodegradation technologies are presented in this review as one of the best options because of their environmental friendliness, cost-effectiveness, accessibility, less selectivity, and wider scope of applications among others. The bandgap, particle size, surface area, electrical properties, thermal stability, reusability, chemical stability, and other properties of silver nanoparticles (AgNPS) are highlighted to account for their suitability in adsorption and photocatalytic applications, concerning organic contaminants. Literatures have been reviewed on the application of various AgNPS as adsorbent and photocatalyst in the remediation of several classes of organic contaminants. Theories of adsorption have also been outlined while photocatalysis is seen to have adsorption as the initial mechanism. Challenges facing the application of silver nanoparticles have also been highlighted and possible solutions have been presented. However, current information is dominated by applications on dyes and the view of the authors supports the need to strengthen the usefulness of AgNPS in adsorption and photodegradation of more classes of organic contaminants, especially emerging contaminants. We also encourage the simultaneous applications of adsorption and photodegradation to completely convert toxic wastes to harmless forms.

Hydrochar-nanoparticle integration for arsenic removal from wastewater: Challenges, possible solutions, and future horizon

Arsenic (As) contamination poses a significant threat to human health, ecosystems, and agriculture, with levels ranging from 12 to 75% attributed to mine waste and stream sediments. This naturally element is abundant in Earth's crust and gets released into the environment through mining and rock processing, causing ≈363 million people to depend on As-contaminated groundwater. To combat this issue, introducing a sustainable hydrochar system has achieved a remarkable removal efficiency of over 92% for arsenic through adsorption. This comprehensive review presents an overview of As contamination in the environment, with a specific focus on its impact on drinking water and wastewater. It delves into the far-reaching effects of As on human health, ecosystems, aquatic systems, and agriculture, while also exploring the effectiveness of existing As treatment systems. Additionally, the study examines the potential of hydrochar as an efficient adsorbent for As removal from water/wastewater, along with other relevant adsorbents and biomass-based preparations of hydrochar. Notably, the fusion of hydrochar with nanoparticle-centric approaches presents a highly promising and environmentally friendly solution for achieving the removal of As from wastewater, exceeding >99% efficiency. This innovative approach holds immense potential for advancing the realms of green chemistry and environmental restoration. Various challenges associated with As contamination and treatment are highlighted, and proposed solutions are discussed. The review emphasizes the urgent need to advance treatment technologies, improve monitoring methods, and enhance regulatory frameworks. Looking outlook, the article underscores the importance of fostering research efforts, raising public awareness, and fostering interdisciplinary collaboration to address this critical environmental issue. Such efforts are vital for UN Sustainable Development Goals, especially clean water and sanitation (Goal 6) and climate action (Goal 13), crucial for global sustainability.

Lanthanum nanoparticle (La2O3)-loaded adsorbents for removal of hexavalent chromium: a kinetics, isotherm, and thermodynamic study

Nanocomposite adsorbents for wastewater treatment gained popularity in recent times. In the present study, nanoparticles prepared from lanthanum have been loaded on the powdered form of aquatic plants Salvinia molesta (S. molesta) and Typha latifolia (T. latifolia). These new adsorbents were NPS (nanoparticle-loaded S. molesta) and NPT (nanoparticle-loaded T. latifolia). The batch study was carried out to assess the effect of several factors on the adsorption of Cr(VI) by novel adsorbents NPS and NPT. XRD, SEM, FTIR, EDX, and Zeta potential were used for the characterization of nanoparticles formed and novel adsorbents. The maximal adsorption was noticed by both adsorbents at pH 1, 20 ppm of initial metal concentration, and 1 h of contact period with 150 rpm at 25 ℃. The adsorbent dose of 60 mg and 80 mg was observed as the equilibrium dose for NPS and NPT, respectively. The maximum adsorption capacity observed was 27.18 mg/g for NPS and 19.85 mg/g for NPT. Freundlich isotherm was better fitted for both adsorbents. Pseudo-second-order kinetics depicts the better mechanism of adsorption with R2 = 0.9995 and 0.9982 for NPS and NPT, respectively. Thermodynamic parameters show that the adsorption process was exothermic and spontaneous.

Removal of Organic Matter from Tunisian Industrial Phosphoric Acid by Adsorption onto Purified Natural Illite/Kaolinite Clay: Kinetics, Isothermal and Thermodynamic Studies

This work aims to use a green, economical and efficient adsorbent to remove organic matter from Tunisian industrial wet phosphoric acid (WPA: 52% P2O5). For this purpose, a natural and abundant clay is extracted from the Douiret, Tataouine deposit in southern Tunisia. This clay is being tested for the first time as an adsorbent in WPA medium. The raw clay and purified clay are analysed using standard analytical techniques such as Fourier transform infrared spectroscopy, X-ray diffraction, and BET methods. The results show that the raw clay is a mixture of illite and kaolinite, with other mineral impurities, mainly quartz. Organic matter adsorption tests show that the purified clay exhibits greater effectiveness than raw clay. The parametric study with purified clay indicates that temperature, contact time, and clay dosage strongly influence organic matter adsorption. The highest adsorption occurs at 60 °C after 50 min, reaching 56% with 8 g of purified clay per kg of WPA. Among several recognised models, the pseudo-second-order kinetic model and the Sips isotherm model are the most suitable for modelling the experimental data. This study suggests that Douiret clay can be considered an effective, inexpensive and environmentally friendly adsorbent for eliminating organic matter in industrial phosphoric acid.

Biosynthesis approach of zinc oxide nanoparticles for aqueous phosphorous removal: physicochemical properties and antibacterial activities

In this study, phosphorus (PO43--P) is removed from water samples using zinc oxide nanoparticles (ZnO NPs). These nanoparticles are produced easily, quickly, and sustainably using Onion extracts (Allium cepa) at an average crystallite size of 8.13 nm using the Debye-Scherrer equation in the hexagonal wurtzite phase. The characterization and investigation of bio-synthesis ZnO NPs were carried out. With an initial concentration of 250 mg/L of P, the effects of the adsorbent dose, pH, contact time, and temperature were examined. At pH = 3 and T = 300 K, ZnO NPs achieved the optimum sorption capacity of 84 mg/g, which was superior to many other adsorbents. The isothermal study was found to fit the Langmuir model at a monolayer capacity of 89.8 mg/g, and the kinetic study was found to follow the pseudo-second-order model. The adsorption process was verified to be endothermic and spontaneous by thermodynamic characteristics. As a result of their low cost as an adsorbent and their high metal absorption, ZnO NPs were found to be the most promising sorbent in this investigation and have the potential to be used as effective sorbents for the removal of P from aqueous solutions. The antimicrobial activity results showed that ZnO NPs concentration had greater antibacterial activity than conventional Cefotaxime, which was utilized as a positive control in the inhibitory zone. However, no inhibitory zone was visible in the controlled wells that had been supplemented with onion extract and DMSO.

Developing efficient CuO nanoplate/ZnO nanoparticle hybrid photocatalysts for methylene blue degradation under visible light

CuO/ZnO nanocomposites with different components can overcome the drawbacks of previously used photocatalysts owing to their promotion in charge separation and transportation, light absorption, and the photo-oxidation of dyes. In this study, CuO nanoplates were synthesized by the hydrothermal method, while ZnO nanoparticles were fabricated by the precipitation method. A series of CuO/ZnO nanocomposites with different ZnO-to-CuO weight ratios, namely, 2 : 8, 4 : 6, 5 : 5, 6 : 4, and 8 : 2 were obtained via a mixing process. X-ray diffraction patterns confirmed the presence of hexagonal wurtzite ZnO and monoclinic CuO in the synthesized CuO/ZnO nanocomposites. Scanning electron microscopy showed the dispersion of ZnO nanoparticles on the surface of CuO nanoplates. Ultraviolet-visible absorption spectra exhibited a slight red-shift in the absorption edge of binary oxides relative to pure ZnO or CuO. All samples were employed for the photocatalytic degradation of methylene blue (MB) under visible light irradiation. The composite samples exhibited enhanced photocatalytic performance compared with pristine CuO or ZnO. This study aimed to examine the effect of the ZnO-to-CuO weight ratio on their photocatalytic performance. The results indicated that among all the synthesized nanocomposites and pristine oxides, the nanocomposite with ZnO and CuO in a proportion of 4 : 6 shows the highest photodegradation activity for the removal of MB with 93% MB photodegraded within 60 min at an initial MB concentration of 5 ppm. The photocatalytic kinetic data were described well by the pseudo-first-order model with a high correlation coefficient of 0.95. The photocatalytic mechanism of the mixed metal oxide was proposed and discussed in detail. The photodegradation characteristic of CuO/ZnO nanostructures is valuable for methylene blue degradation from aqueous solutions as well as environmental purification in various fields.

Removal of Phosphate by Adsorption with 2-Phenylimidazole-Modified Porous ZIF-8: Powder and Chitosan Spheres

Due to rapid socioeconomic development, increased phosphorus concentrations can cause eutrophication of water bodies, with devastating effects on environmental sustainability and aquatic ecosystems. In this study, ZIF-8-PhIm was prepared for phosphorus removal using 2-phenylimidazole via the solvent-assisted ligand exchange (SALE) method. The structure and composition of ZIF-8-PhIm were characterized by various methods, including X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FT-IR), 1H nuclear magnetic resonance (NMR), X-ray photoelectron spectroscopy (XPS), and Brunauer-Emmett-Teller (BET) analysis. Compared to the ZIF-8 material, it exhibited a multistage pore structure with larger pore capacity and pore size, increased hydrophilicity, exposure of more adsorption sites, and also stronger electrostatic interaction. Under optimized conditions (T = 298 K, C0 = 150 mg/L, dose = 0.2 g/L), the adsorption capacity of ZIF-8-PhIm reached 162.93 mg/g, which was greater than that of the ZIF-8 material (92.07 mg/g). The Langmuir isotherm and pseudo-second-order kinetic models were suitable for describing the phosphate adsorption of ZIF-8-PhIm. The main effects of ZIF-8-PhIm on phosphate adsorption were Zn-O-P bonding and electrostatic interactions. It also had good regeneration properties. The ZIF-8-PhIm/CS spheres were prepared using chitosan (CS) as the cross-linking agent. The results of dynamic adsorption experiments on the spheres showed a saturation capacity of 85.69 mg/g and a half-penetration time of 514.15 min at 318 K according to the fitted results.

Application of Box-Behnken Design to Optimize Phosphate Adsorption Conditions from Water onto Novel Adsorbent CS-ZL/ZrO/Fe3O4: Characterization, Equilibrium, Isotherm, Kinetic, and Desorption Studies

Phosphate (PO₄^3-) is an essential nutrient in agriculture; however, it is hazardous to the environment if discharged in excess as in wastewater discharge and runoff from agriculture. Moreover, the stability of chitosan under acidic conditions remains a concern. To address these problems, CS-ZL/ZrO/Fe₃O₄ was synthesized using a crosslinking method as a novel adsorbent for the removal of phosphate (PO₄^3-) from water and to increase the stability of chitosan. The response surface methodology (RSM) with a Box-Behnken design (BBD)-based analysis of variance (ANOVA) was implemented. The ANOVA results clearly showed that the adsorption of PO₄^3- onto CS-ZL/ZrO/Fe₃O₄ was significant (p ≤ 0.05), with good mechanical stability. pH, dosage, and time were the three most important factors for the removal of PO₄^3-. Freundlich isotherm and pseudo-second-order kinetic models generated the best equivalents for PO₄^3- adsorption. The presence of coexisting ions for PO₄^3- removal was also studied. The results indicated no significant effect on PO₄^3- removal (p ≤ 0.05). After adsorption, PO₄^3- was easily released by 1 M NaOH, reaching 95.77% and exhibiting a good capability over three cycles. Thus, this concept is effective for increasing the stability of chitosan and is an alternative adsorbent for the removal of PO₄^3- from water.

Profiling of phosphorylated metabolites from lung cancer by zeolite loaded Mg-Al-Ce ternary hydroxide (Zeolite@MAC) composite

Phosphorylated metabolites are linked to metabolism, and the dysregulation of metabolic reactions brings cancer. Dysregulated levels lead to hyperactivation of glycolytic and mitochondrial oxidative phosphorylation pathways. Abnormal concentrations are the indicators of energy-related disorders. In this work, Zeolite-loaded Mg-Al-Ce hydroxides (Zeolite@MAC) are prepared by co-precipitation and characterized through FTIR, XRD, SEM, BET, AFM, TEM, and DLS. Magnesium-Aluminum-Cerium-Zeolite particles enrich phosphate-containing small molecules. These ternary hydroxides carried out the main adsorption mechanism, which swapped the surface hydroxyl group ligands for phosphate and the inner-sphere complex of CePO₄. XH₂O. Cerium plays a significant role in the complexation of phosphate, and adding Mg and Al further helps disperse Ce and increase the surface charge on the adsorbent. ΑTP and AMP are the standard molecules for parameter optimization. Zeolite@MAC enriches phosphorylated metabolites followed by their desorption via UV-vis spectrophotometry. MS profiles for healthy and lung cancer serum samples are obtained for phosphorylated metabolites. Characteristic phosphorylated metabolites have been detected in lung cancer samples with high expression. The role of phosphorylated metabolites is explored for abnormal metabolic pathways in lung cancer. The fabricated material is sensitive, selective, and highly enriched for identifying phosphate-specific biomarkers.

Natural deep eutectic solvent (fructose-glycine) functionalized-celite/ polyethylene glycol hydrogel nanocomposite for phosphate adsorption: Statistical analysis

The increasing usage of phosphate fertilizers for agricultural purposes has led to an augmented level of phosphorus in watercourses negatively impacting the ecosystems and water quality warranting its amputation from polluted water. This article describes the preparation of a novel natural deep eutectic solvent (NADES) functionalized-celite/polyethylene glycol hydrogel nanocomposite (NADES-Cel/PEG HNC) for adsorptive phosphate removal from water. The XRD, FTIR, SEM coupled with EDX spectroscopy, TEM, BET analysis, and pH_pzc measurement were used to characterise the prepared material. Central composite design (CCD) in response surface methodology (RSM) was used for experimental design to analyse the individual and combined impact of five operational parameters on equilibrium adsorption capacity (Q_e), and evaluate the optimal operating conditions by numerical optimization, which were obtained as: contact time (60 min), adsorbent dosage (1.0 g/L), initial [PO₄^3-] (80 mg/L), initial solution pH (3.5), and temperature (304 K). The adsorption process was best explicated via Langmuir adsorption isotherm with a noteworthy saturation capacity, Q_m of 111.80 mg PO₄^3-/g at 298 K, and was favourable (S* = 0.99), feasible (ΔG° = -7.02 kJ/mol), exothermic (ΔH° = -8.39 kJ/mol) and physical in nature. The uptake mechanism largely involved H-bonding, electrostatic interaction, n-π interaction and pore-filling. Uptake kinetics of PO₄^3- was best explicated by pseudo-second order model, and the rate-determining step involved both intraparticle and liquid film diffusion mechanisms. The admirable performance of NADES-Cel/PEG HNC was signified by its competent adsorption efficacy and effectual reusability. The pertinence of the hydrogel nanocomposite for treatment of real wastewater was tested. Hence, NADES-Cel/PEG HNC might prove to be a pragmatic adsorbent for decontamination of PO₄^3- from an aqueous environment.

The effectiveness and adsorption mechanism of iron-carbon nanotube composites for removing phosphate from aqueous environments

This study successfully employed iron-carbon nanotubes (Fe-CNT) to recover phosphate (P) from water. We examined the effects of various iron concentrations denoted by Fe-CNT-1 and Fe-CNT-2 on P removal and compared them with pristine carbon nanotubes (CNTs). The adsorption capacity of Fe-CNTs was much better than pristine CNTs. According to the high adsorption capacity, Fe-CNT-2 sample was very effective for P recovery and exhibits ∼7 times higher P removal efficiency than that of pristine CNTs. The characterization of the as-obtained adsorbent (Fe-CNT-2) and pristine CNTs were performed using X-ray diffraction, Brunauer-Emmett-Teller method, Field emission scanning electron microscope coupled with energy-dispersive spectroscopy detector (FESEM-EDS), X-ray photoelectron spectroscopy and Transmission electron microscopy. Results demonstrated that iron oxide nanoparticles were successfully deposited on the surface of CNT. The adsorption kinetics and isotherm studies for P removal showed pseudo-second-order rate constants (R² > 0.99) and the Langmuir isotherm (R² > 0.99) respectively, thus revealing that the nature of adsorption was chemisorption. The estimated Langmuir adsorption capacity of Fe-CNT-2 was 36.5 mgP/g or 112 mg PO₄/g at an equilibrium time of 3 h. The ionic strength provided by SO₄^2-, NO₃^-, and Cl^- demonstrated no considerable influence on phosphate adsorption. Moreover, the P adsorbed Fe-CNT-2 was efficiently recovered with different concentrations of desorbing reagents, such as NaOH and NaCO₃^2-. Moreover, the findings of X-ray photoelectron spectroscopy (XPS) analysis demonstrated that OH group played a major role in the P removal by Fe-CNT-2. The findings of this study demonstrate that Fe-CNT-2 had a great deal of application as an effective and stable adsorbent for the P recovery from aquatic environments.

Silver nanoparticles from Tabernaemontana divaricate leaf extract: mechanism of action and bio-application for photo degradation of 4-aminopyridine

Silver nanoparticles (Ag NPs) were synthesised by the reduction of Ag⁺ to Ag⁰ in the presence of enol form of flavonoids present in plant extract of Tabernaemontana divaricate (T. divaricate). Prepared Ag NPs were characterised using UV-Vis, XRD, HR-TEM with EDX and XPS techniques. XPS spectra exhibited peaks at 366 eV and 373 eV, which specified spin orbits for Ag 3d_3/2, and Ag 3d_5/2 that confirmed the formation of Ag NPs. Ag NPs were spherical in shape with an average size of 30 nm as revealed by HR-TEM and FE-SEM techniques. EDX studies verified the high purity of Ag NPs with silver 46.96%, carbon 16.35%, oxygen 16.22%, nitrogen 20.25% and sulphur 0.21%. LC-MS analysis of plant extract confirmed the qualitative presence of alkaloids, tannins, flavonoids, phenols, and carbohydrates. Prepared Ag NPs showed good photocatalytic activity towards degradation of 4-Amniopyridine with 61% degradation efficiency at optimum conditions in 2 h of reaction time under visible light. The ten intermediates were found within the mass number of 0-450. Ag NPs synthesised using bio-extract have also shown good inactivation against Escherichia coli (E. coli) and Bacillus subtilis (B. subtilis) bacteria due to the availability of free radicals.

Efficient Removal of Phosphate from Wastewater by a Novel Phyto-Graphene Composite Derived from Palm Byproducts

The increased demand for clean water especially in overpopulated countries is of great concern; thus, the development of eco-friendly and cost-effective techniques and materials that can remediate polluted water for possible reuse in agricultural purposes can offer a life-saving solution to improve human welfare, especially in view of climate change impacts. In the current study, the agricultural byproducts of palm trees have been used for the first time as a carbon source to produce graphene functionalized with ferrocene in a composite form to enhance its water treatment potential. Scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy, X-ray diffraction (XRD), ultraviolet-visible, Fourier transform infrared spectroscopy, zeta potential, thermogravimetric analysis, and Raman techniques have been used to characterize the produced materials. SEM investigations confirmed the formation of multiple sheets of the graphene composite. Data collected from the zeta potential revealed that graphene was supported with a negative surface charge that maintains its stability while XRD elucidated that graphene characteristic peaks were evident at 2θ = 22.4 and 22.08° using palm leaves and fibers, respectively. Batch adsorption experiments were conducted to find out the most suitable conditions to remove PO₄ ^3- from wastewater by applying different parameters, including pH, adsorbent dose, initial concentration, and time. Their effect on the adsorption process was also investigated. Results demonstrated that the best adsorption capacity was 58.93 mg/g (removal percentage: 78.57%) using graphene derived from palm fibers at 15 mg L^-1 initial concentration, pH = 3, dose = 10 mg, and 60 min contact time. Both linear and non-linear forms of kinetic and isotherm models were investigated. The adsorption process obeyed the pseudo-second-order kinetic model and was well fitted to the Langmuir isotherm.

Biocomposite based on zirconium and amine-grafted walnut shell with antibacterial properties for the removal of Alizarin red in water: batch and column studies

Recent progress has been made in the application of novel zirconium-loaded amine-grafted walnut shells as multifunctional adsorbents for the remediation of Alizarin red (AR) and bacteria in aqueous solutions. The morphology and functional groups of ACWNS@Zr were studied using Brunauer-Emmett-Teller (BET) techniques, X-ray diffraction (XRD), pH point of zero charges (pHpzc), scanning electron microscopy (SEM), and Fourier transform infrared (FTIR) spectroscopy. Adsorption and regeneration tests were carried out in batch and column mode. The ACWNS@Zr had a Langmuir maximum capacity of 415.5 ± 6.1 mg g^-1 at 303 K. The spread plate technique was used to evaluate the adsorbent's antimicrobial properties against Staphylococcus aureus and Escherichia coli. ACWNS@Zr exhibited inhibitory potential towards S. aureus and E. coli in the suspensions by 53.3% and 15.0%, respectively. Electrostatic interaction and complexation interaction could be the key mechanisms governing AR dye removal. Equilibrium isotherms fit Langmuir models better for both batch and column studies, while adsorption kinetics to pseudo-second-order and Thomas models for batch and column studies, respectively. Thermodynamic studies indicated that the adsorption process was endothermic and spontaneous. Furthermore, columns' mass transfer capacity (B) increased as the concentration increased due to the enhanced driving force for AR adsorption onto ACWNS@Zr. Regeneration with NaOH solution of AR-loaded ACWNS@Zr was remarkable.

Adsorption performance and mechanism of cationic and anionic dyes by KOH activated biochar derived from medical waste pyrolysis

The massive generation of medical waste (MW) results in a series of environmental, social, and ecological problems. Pyrolysis is one such approach that has attracted more attention because of the production of value-added products with lesser environmental risk. In this study, the activated biochar (ABC600) was obtained from MW pyrolysis and activated with KOH. The adsorption mechanism of activated biochar on cationic (methylene blue) and anionic (reactive yellow) dyes were studied. The physicochemical characterization of biochar showed that increasing pyrolysis temperature and KOH activation resulted in increased surface area, a rough surface with a clear porous structure, and sufficient functional groups. MB and RYD-145 adsorption on ABC600 was more consistent with Langmuir isotherm (R² ≥ 0.996) and pseudo-second-order kinetics (R² ≥ 0.998), indicating chemisorption with monolayer characteristics. The Langmuir model fitting demonstrated that MB and RYD-145 had maximum uptake capacities of 922.2 and 343.4 mg⋅g^-1. The thermodynamics study of both dyes showed a positive change in enthalpy (ΔH°) and entropy (ΔS°), revealing the endothermic adsorption behavior and randomness in dye molecule arrangement on activated-biochar/solution surface. The activated biochar has excellent adsorption potential for cationic and anionic dyes; hence, it can be considered an economical and efficient adsorbent.

Remediation of Water Using a Nanofabricated Cellulose Membrane Embedded with Silver Nanoparticles

The removal of pesticide pollution is imperative, because of their high environmental load and persistence, and their potential for bioaccumulation in, and toxicity to the environment. Most pesticides are found to be toxic even at trace levels. AgNPs can be effectively used for the adsorption of pesticides, and the incorporation of the AgNPs onto a support polymeric membrane enhances their effectiveness and reduces the potential unwanted consequences of intentionally adding free nanoparticles to the environment. Here, silver nanoparticles (AgNPs) were synthesized using a reliable, eco-friendly, and one-step "green" method, by reacting Mentha Piperita (mint) extract with AgNO₃ aqueous solution at 60 °C in a microwave. The resulting high surface area nanoparticles are both economic and effective environmental remediation agents, playing a promising role in the elimination of aquatic pesticide pollution. Embedding the nanoparticles into a cellulose membrane at a low concentration (0.1 g) of AgNPs was shown to result in effectively adsorption of representative pesticides (Cypermethrin, Paraquat, and Cartap) within 60 min, while increasing the concentration of nanoparticles incorporated into the membrane further enhanced the removal of the exemplar pesticides from water. The high adsorption capacity makes the cellulose-AgNPs membrane an excellent substrate for the remediation of pesticide-polluted water.

Electrified nanohybrid filter for enhanced phosphorus removal from water

Phosphorus (P) has been identified as a major cause of eutrophication. One feasible way to deal with P-containing wastewater is to employ advanced adsorbents with high P affinity. Towards this end, the loading of these sorbents onto a conductive scaffold would facilitate the introduction of an electric field into the reaction system thereby permitting a continuous-flow operation and improved P sorption kinetics. Here, the preparation and evaluation of an electroactive carbon nanotube (CNT) filter functionalized with cerium-based metal organic frameworks (Ce-MOF) is reported. Various advanced characterization techniques confirmed the successful fabrication of the Ce-MOF/CNT nanohybrid filter. The results suggested that the nanohybrid filter had a maximum P adsorption capacity of 22.41 mg g^-1, which compared favorably with other state-of-the-art P sorbents. Ce-MOF loading, applied voltage and flow rate each increased the rate constants for phosphate removal by factors of 1.6, 2.1 and 5.8 times relative to the absent states. The underlying P sorption mechanisms involved outer-sphere surface complexation (electrostatic attraction), inner-sphere surface complexation (Ce-O-P) and diffusion. The performance was tolerant of a wide operational pH range and different water matrices. The Ce-MOF/CNT electrochemical filter described in this study provides a viable strategy to address the challenging issues associated with aqueous P pollution.

Novel maricultural-solid-waste derived biochar for removing eutrophic nutrients and enrofloxacin: Property, mechanism, and application assessment

Land-based seawater aquaculture accompanied by high stocking density usually involves producing excess eutrophic nutrients, residual baits, excrement, and antibiotics. Because of limited technology and salinity, proper and efficient treatment of these wastes is still an unsolved issue. In this study, the feasibility of maricultural fish residual bait and excrement-derived biochar as water pollutant remover and saline-alkaline soil amendment were firstly assessed. The biochar was pyrolyzed at 300, 500, 700, 800, 900 ℃ (marked as BC300, BC500, BC700, BC800, BC900) and modified by zirconium or iron (BC700-Zr or BC700-Fe). BC700-Zr had the highest specific surface area. BC700-Zr and BC700-Fe exhibited higher nitrogen removal efficiency. The biochars exhibited nitrogen and phosphate desorption, while we observed no obvious phosphate desorption in BC700-Zr or BC700-Fe. Adsorption kinetics analysis indicated that adsorption processes of nitrate, nitrite and enrofloxacin were consistent with pseudo-second-order model, while ammonium and phosphate adsorption processes fitted pseudo-first-order model better. The biochar showed nitrogen and phosphate nutrients release effects, indicating potential application in saline-alkaline soil improvement. Multi-linear regression analysis indicated that nitrogen release was closely related to biochar nitrogen content, pH and average pore width. Phosphate release was inversely related to pH and positively related to average pore width.

The Effect of Bio-Synthesized Silver Nanoparticles on Germination, Early Seedling Development, and Metabolome of Wheat (Triticum aestivum L.)

Changes in the metabolome of germinating seeds and seedlings caused by metal nanoparticles are poorly understood. In the present study, the effects of bio-synthesized silver nanoparticles ((Bio)Ag NPs) on grains germination, early seedlings development, and metabolic profiles of roots, coleoptile, and endosperm of wheat were analyzed. Grains germinated well in (Bio)Ag NPs suspensions at the concentration in the range 10–40 mg/L. However, the growth of coleoptile was inhibited by 25%, regardless of (Bio)Ag NPs concentration tested, whereas the growth of roots gradually slowed down along with the increasing concentration of (Bio)Ag NPs. The deleterious effect of Ag NPs on roots was manifested by their shortening, thickening, browning of roots tips, epidermal cell death, progression from apical meristem up to root hairs zone, and the inhibition of root hair development. (Bio)Ag NPs stimulated ROS production in roots and affected the metabolic profiles of all tissues. Roots accumulated sucrose, maltose, 1-kestose, phosphoric acid, and some amino acids (i.e., proline, aspartate/asparagine, hydroxyproline, and branched-chain amino acids). In coleoptile and endosperm, contrary to roots, the concentration of most metabolites decreased. Moreover, coleoptile accumulated galactose. Changes in the concentration of polar metabolites in seedlings revealed the affection of primary metabolism, disturbances in the mobilization of storage materials, and a translocation of sugars and amino acids from the endosperm to growing seedlings.

Amine-grafted walnut shell for efficient removal of phosphate and nitrate

The presence of emerging pollutants such as PO₄^3- and NO₃^- in water bodies has attracted worldwide concern about their severe effects on water bodies and the health of humankind in general. Therefore, to preserve the health of humankind and environmental safety, it is of the essence that industrial effluents are treated before they are discharged into water bodies. Amine functionalized walnut shells (ACWNS) were synthesized, characterized, and then tested as a novel adsorbent for PO₄^3- and NO₃^- removal. The effects of pH, dosage, initial phosphate concentration, interference ions, and temperature on the removal of phosphate and nitrate were investigated. Notably, the adsorption of PO₄^3- and NO₃^- was exothermic and spontaneous, with a maximum uptake capacity of phosphate and nitrate, at 293 K, 82.2 and 35.7 mg g^-1, respectively. The mechanism by which these ions were adsorbed onto ACWNS could be electrostatic interactions and hydrogen bonding. Pseudo-second-order kinetic model fitted the PO₄^3- and NO₃^- adsorption, while Freundlich and Langmuir models best fitted the PO₄^3- and NO₃^- adsorption, respectively. Furthermore, in the binary system, the uptake capacity of phosphate decreased by 14.4% while nitrate witnessed a reduction in its uptake capacity of 10.4%. ACWNS has a higher attraction towards both ions and this could be attributed to the existence of a variety of active areas on ACWNS that exhibit a degree of specificity for the individual ions. Results obtained from real water sample analysis confirmed ACWNS as highly efficient to be utilized for practical remediation processes.

Sulfate and phosphate ions removal using novel nano-adsorbents: modeling and optimization, kinetics, isotherm and thermodynamic studies

Many compounds containing sulfur and phosphorous are present in wastewater of various industries like food processing, paper making, etc. The higher level of phosphate and sulfate ions causes many problems in everyday life. Based on this, nickel monometallic and nickel-cobalt bimetallic nanoparticles were synthesized using leaves extract of Coix lacryma-jobi L. and applied for sulfate and phosphate ions removal. UV-Vis. spectroscopy, fourier transformed infrared spectroscopy; scanning electron microscopy; X-ray diffraction, and energy-dispersive X-ray spectroscopy were used as characterizing techniques for synthesized nanoparticles. UV spectra for Ni nanoparticles showed the absorption band in the 380-400 nm range, while for Ni-Co bimetallic nanoparticles was noticed at 396 nm and 513 nm. Different functional groups were observed in FTIR spectra of leaves extract which acted as reducing and capping agents to form stable NPs. Different factors like adsorbent dosage, pH, temperature, adsorbate concentration, and time were optimized for maximum removal of sulfate and phosphate anions. The antioxidant potential of prepared nanoparticles was assessed by three different methods. The kinetics, thermodynamics, and adsorption isotherms were also studied for these ions removal. In the current study, the green approach was easy, time-saving and proved to be beneficial to remove sulfate and phosphate anions from wastewater.

Insights into Sorption and Molecular Transport of Aqueous Glucose into Zeolite Nanopores

Liquid-phase heterogeneous catalysis using zeolites is important for biomass conversion to fuels and chemicals. There is a substantial body of work on gas-phase sorption in zeolites with different topologies; however, studies investigating the diffusion of complex molecules in liquid medium into zeolitic nanopores are scarce. Here, we present a molecular dynamics study to understand the sorption and diffusion of aqueous β-d-glucose into β-zeolite silicate at T = 395 K and P = 1 bar. Through 2-μs-long molecular dynamics trajectories, we reveal the role of the solvent, the kinetics of the pore filling, and the effect of the water model on these properties. We find that the glucose and water loading is a function of the initial glucose concentration. Although the glucose concentration increases monotonically with the initial glucose concentration, the water loading exhibits a nonmonotonic behavior. At the highest initial concentration (∼20 wt %), we find that the equilibrium loading of glucose is approximately five molecules per unit cell and displays a weak dependence on the water model. Glucose molecules follow a single-file diffusion in the nanopores due to confinement. The dynamics of glucose and water molecules slows significantly at the interface. The average residence time for glucose molecules is an order of magnitude larger than that in the bulk solution, while it is about twice as large for the water molecules. Our simulations reveal critical molecular details of the glucose molecule's local environment inside the zeolite pore relevant to catalytic conversion of biomass to valuable chemicals.

Impregnation of Silver Nanoparticles onto Polymers Based on Sugarcane Bagasse for the Remediation of Endocrine Disruptor–Bisphenol A from Water

This present study introduces a contemporary innovation of synthesized polymer–silver nanoparticle nanocomposite adsorbent based on sugarcane bagasse (AgNP-SB-βCD) for the sequestration of emerging micropollutant–bisphenol A from water matrix. Batch adsorption mode was carried out to assess the effectiveness of AgNP-SB-βCD nanocomposites towards eliminating bisphenol A (BPA). Characterization techniques including SEM, FTIR, and XRD have confirmed the successful incorporation of silver nanoparticles (AgNPs) onto bagasse–polymer. At 25°C, pH 7, and contact time of 120 min, the nanocomposites had a maximum uptake capacity of 158.4 mg g-1on BPA. The equilibrium isotherm of BPA on AgNPs-SB-βCD has fitted effectively with Langmuir model while the adsorption kinetics conformed to pseudo-second order. The adsorption phenomenon was controlled mainly by physisorption (via host–guest inclusion van der Waals bonding and pore filling effect). In addition, oxidative degradation of BPA by AgNPs-SB-βCD could marginally contribute the removal of BPA due to oxidative dissolution of AgNPs at pH 7. The thermodynamic results substantiate the spontaneity and exothermic behaviors of the adsorption phenomenon. The polymeric nanocomposite adsorbent was regenerated five times (using 75% ethanol) without considerable loss of its adsorption capacity. This authenticates its reusability and consistency performances; accordingly, it can be a market competitor adsorbent for the treatment of water contaminated with BPA.

Biomass as source for hydrochar and biochar production to recover phosphates from wastewater: A review on challenges, commercialization, and future perspectives

Excessive phosphate run-off with total phosphorus concentration greater than 20 μg P L^-1 triggers the growth of harmful algal species in waterbodies and potentially leads to eutrophication. This has severe negative implications on aquatic environment and impacts human health. The annual economic impact of harmful algal blooms is reported to be as high as $25 million for public health and commercial fishery sector, $29 million for recreation/tourism sector and $2 million for monitoring and management. Adsorption is widely considered as an effective and economic strategy to achieve extremely low concentration of phosphorus. The char produced by valorizing various waste biomasses have been gaining attention in phosphorus remediation owing to their availability, their ability to regenerate and reuse. This review paper exclusively focuses on utilizing hydrochar and biochar synthesized from waste biomass, respectively, through hydrothermal carbonization and slow pyrolysis to mitigate phosphorus concentration and potential strategies for handling the spent char. The key mechanisms involved in phosphate adsorption are electrostatic interaction, ion exchange and complexation. The maximum adsorption capacity of hydrochar and biochar ranges from 14-386 mg g^-1 and 3-887 mg g^-1, respectively. Hydrochar and biochar are cost-effective alternative to commercial activated carbon and spent char can be used for multiple adsorption cycles. Furthermore, extensive research studies on optimizing the feedstock, reaction and activation conditions coupled with technoeconomic analysis and life cycle assessment could pave way for commercialization of char-based adsorption technology.

Green Synthesis of Reusable Adsorbents for the Removal of Heavy Metal Ions

Industrial wastewater often contains heavy metals, like lead, copper, nickel, cadmium, zinc, mercury, arsenic, and chromium. Overdoses of heavy metals will impose a severe threat to human health. Adsorption is the most efficient way of wastewater treatment for eliminating heavy metals. A novel material-reusable hydrogel-based adsorbent was developed in overcoming the regeneration issue. The polyethylene glycol diacrylate-3-sulfopropyl methacrylate potassium salt (PEGDA-SMP) hydrogel performed an ion-exchange rate to remove heavy metals from wastewater in 30-120 min. The adsorption capacity of PEGDA-SMP increases the increasing pH of a solution, in which pH 5 reaches the maximum. Pseudo-second-order adsorption and the Langmuir adsorption model can fully describe the adsorption properties of PEGDA-SMP for heavy metals. PEGDA-SMP prefers to exchange Pb²⁺ through K⁺, and its adsorption capacity can achieve 263.158 mg/g. Ag⁺, Zn²⁺, Ni²⁺, and Cu²⁺ were 227.27, 117.647, 102.041, and 99.010 mg/g, respectively. The hydrated ionic radius of the heavy metal might play an essential role to affect the adsorption preference. The removal efficiency of heavy metals can approach over 95% for each heavy metal. PEGDA-SMP performs rapid desorption and reaches desorption equilibrium in 15 min. After 10 consecutive adsorption-desorption cycles, the adsorption capacity remained over 90%. The hydrogel developed in this study showed reversible heavy metal absorption. Therefore, excellent adsorption-desorption properties of PEGDA-SMP can be potentially extended to industrial wastewater for removing heavy metals.

Novel reusable hydrogel adsorbents for precious metal recycle

A novel polyethylene glycol diacrylate-allylthiourea (ATU-PEGDA) hydrogel was simply synthesized through photo-reaction. Modified thiourea simultaneously employed chelation and electrostatic force to selectively recycle Ag(I) and Pd(II) from electrolytic wastewater. Sorption efficiency was nearly 100% for Ag(I) and Pd(II), which occurred at initial pH of 1 within 300 min. The adsorption characteristics of ATU-PEGDA followed Langmuir isotherm model and the maximum adsorption capacity of Ag(I) and Pd(II) achieved 83.33 and 152.81 mg g-1 sorbent, respectively where Pseudo-first order model demonstrate the adsorption kinetics. In the presence of other heavy metals, ATU-PEGDA performed high selectivity, 0.89 and 1.31 towards Ag(I) and Pd(II). ATU-PEGDA can be completely regenerated within 120 min using 0.5 M thiourea-0.001 M HNO3 and 1 M thiourea-4 M HCl after the adsorption of Ag(I) and Pd(II), respectively. Thiourea-branched structure was created after regeneration, improving the adsorption capacity. Compared to initial hydrogel, the adsorption capacity of Ag(I) and Pd(II) increased 31.83 ± 3.08% and 75.12 ± 11.02%, respectively. Over 10 consecutive adsorption-desorption cycles, ATU-PEGDA performed 111.34 and 263.79 mg g-1 sorbent in adsorption capacity of Ag(I) and Pd(II). Chromism of ATU-PEGDA hydrogel was a benefit to determine adsorption saturation and completely desorption of Ag(I) and Pd(II). Potentially, ATU-PEGDA can be extended to industrial applications.

The Occurrence of Legacy P Soils and Potential Mitigation Practices Using Activated Biochar

The long-term application of manures in watersheds with dense animal production has increased soil phosphorus (P) concentration, exceeding plant and soil assimilative capacities. The P accumulated in soils that are heavily manured and contain excess extractable soil P concentrations is known as legacy P. Runoff and leaching can transport legacy P to ground water and surface water bodies, contributing to water quality impairment and environmental pollution, such as eutrophication. This review article analyzes and discusses current and innovative management practices for soil legacy P. Specifically, we address the use of biochar as an emerging novel technology that reduces P movement and bioavailability in legacy P soils. We illustrate that properties of biochar can be affected by pyrolysis temperature and by various activating chemical compounds and by-products. Our approach consists of engineering biochars, using an activation process on poultry litter feedstock before pyrolysis to enhance the binding or precipitation of legacy P. Finally, this review article describes previous examples of biochar activation and offers new approaches to the production of biochars with enhanced P sorption capabilities.

Enhanced surface properties, hydrophobicity, and sorption behavior of ZnO nanoparticle-impregnated biomass support for oil spill treatment

Metallic nanoparticles (NPs) have gained significant attention in recent years due to their efficiency in the adsorption of water pollutants. Except for magnetic NPs, metallic NPs are rarely used in oil sorption studies, due to the difficulty in recovering the NPs from the treated water. This study reports for the first time the application of ZnONPs for oil spill treatment. The ZnONPs were impregnated onto Musa acuminata peel (MP) support to form a novel material (ZnOMP), which was utilized for the sorption of oil from synthetic oil spills. The as-prepared sorbents were characterized by the SEM, EDS, BET, FTIR, FE-SEM, TGA, and XRD techniques. The presence of 31.32-nm average-sized ZnONPs enhanced the oil uptake characteristics, with clear affinity for the oil phase in comparison to the pristine MP. A maximum sorption capacity of 4.146 g/g and 5.236 g/g was obtained for biosorbents MP and ZnOMP, respectively, which was higher than most reported sorbents. The Freundlich model presented the best fit for the isotherm data, while the pseudo-second-order model was most suited for the kinetics. The presence of competing heavy metal ions in solution did not have any significant effect on the oil sorption capacity onto ZnOMP. The sorption mechanism was attributed to absorption and hydrophobic interactions. ZnONPs impregnated onto the biomass enhanced the spontaneity of oil uptake at higher temperatures. Over 82% desorption of the oil contaminant from the biosorbents was achieved during recovery, using petroleum ether and n-pentane as eluents. Concisely, ZnONPs enhanced the uptake and hydrophobic characteristic of MP biomass and showed good recovery and reusability. Thus, the application of ZnONPs impregnated onto biosorbents in oil spill treatment is highly recommended.

Investigations on characteristics of polyurethane foam impregnated with nanochitosan and nanosilver/silver oxide and its effectiveness in phosphate removal

A novel potential adsorbent, produced with chitosan nanoparticles and silver/silver oxide nanoparticles impregnated on polyurethane foam (PFCA), is developed for phosphate removal in aqueous solutions. The ultraviolet-visible (UV-Vis) spectroscopy uncovered the emergence of nanoparticles. The field emission scanning electron microscopy (FESEM) provided the mean size of chitosan nanoparticles between 56 and 112 nm and that of silver-silver oxide nanoparticles between 44 and 75 nm. Energy dispersive X-ray (EDX) spectroscopy determined the presence of specific elements (C, O, P and Ag) in the adsorbent before and after treatment. Fourier transform infrared (FTIR) spectroscopy revealed the interplay between the N-H bond of amino group in PFCA and phosphate ions during adsorption. X-ray diffraction (XRD) analysis of PFCA showed nearly the same pattern before and after treatment, indicating the stability of PFCA. The silver ion concentration in the effluent from inductively coupled plasma optical emission spectroscopy (ICP-OES) analysis was found to be very less and below the drinking water limits. The surface area estimated by Brunauer-Emmett-Teller (BET) studies was found to be 2.17 m²/g. The experimental studies showed that PFCA can remove 61.24% of phosphate from an influent phosphate phosphorus concentration of 50 mg P/L, at its propitious condition. Even after 7 cycles of reuse, PFCA proved to be effective in removing 20.58% of phosphate. Hence, PFCA can be considered to be a potential sorbent for removing phosphate from surface water. Graphical abstract.

A critical review on silver nanoparticles: From synthesis and applications to its mitigation through low-cost adsorption by biochar

Silver nanoparticles are one of the most beneficial forms of heavy metals in nanotechnology applications. Due to its exceptional antimicrobial properties, low electrical and thermal resistance, and surface plasmon resonance, silver nanoparticles are used in a wide variety of products, including consumer goods, healthcare, catalysts, electronics, and analytical equipment. As the production and applications of silver nanoparticles containing products increase daily, the environmental pollution due to silver nanoparticles release is increasing and affecting especially the aqueous ecosystem. Silver nanoparticles can kill useful bacteria in soil and water, and bioaccumulate in living organisms even at low concentrations from 10^-2 to 10 μg/mL silver can show antibacterial effect. On the other hand, the maximum silver discharge limit into freshwater is 0.1 μg/L and 3.2 μg/L for Australia and the USA, respectively. To reduce its toxic consequences and meet the regulatory guidelines, it is crucial to remove silver nanoparticles from wastewater before it is discharged into other water streams. Several technologies are available to remove silver nanoparticles, but the adsorption process using low-cost adsorbents is a promising alternative to mitigate silver nanoparticle pollution in the bulk stage. As one of the low-cost adsorbents, biochar produced from the biomass waste could be a suitable adsorbent. This review focuses on collating the latest evidence on silver nanoparticle production, applications, environmental consequences, and cost-effective technological approaches for silver removal from wastewater.

Nano-zerovalent manganese/biochar composite for the adsorptive and oxidative removal of Congo-red dye from aqueous solutions

Congo-red (CR), a precursor of textile products and a contaminant of great concern, has contaminated aquatic environments. Here, we explored the synthesis of mesoporous nano-zerovalent manganese (nZVMn) and Phoenix dactylifera leaves biochar (PBC) composite for the removal of CR from water. The nZVMn/PBC adsorbed 117.647 mg/g of CR versus 25.316 mg/g by PBC at [CR]₀ = 20 mg/L and [PBC]₀ = [nZVMn/PBC]₀ = 500 mg/L. Variation of [nZVMn/PBC]₀, [CR]₀ and pH influenced the adsorption of CR. Freundlich adsorption isotherm and pseudo-first-order kinetic models best fitted CR adsorption. The H₂O₂ coupling with nZVMn/PBC promoted removal of CR possibly due to the formation of hydroxyl radical (^●OH) and caused 95 % removal of CR versus 77 % by nZVMn/PBC alone. The ^●OH scavengers inhibited the removal of CR. The nZVMn/PBC showed a good reusability and efficient removal of CR up to the seventh cycle of treatment. Results reveal that nZVMn improved performance, thermal stability and reusability of biochar. Degradation products from ^●OH-mediated degradation of CR were studied by ultraperformance liquid chromatography with mass spectrometric detector to establish degradation pathways. The ion-chromatographic analysis showed the formation of non-toxic inorganic acetate product, which suggests high potential of the newly fabricated adsorbent in the removal of CR.

The enhancement of reactive red 24 adsorption from aqueous solution using agricultural waste-derived biochar modified with ZnO nanoparticles

In this study, two types of agricultural wastes, sugarcane bagasse (SB) and cassava root husks (CRHs), were used to fabricate biochars. The pristine biochars derived from SB and CRHs (SBB and CRHB, respectively) were modified using ZnO nanoparticles to generate modified biochars (SBB-ZnO and CRHB-ZnO, respectively) for the removal of Reactive Red 24 (RR24) from stimulated wastewater. Batch experiments were performed to evaluate the effects of ZnO nanoparticles' loading ratio, solution pH, contact time, and initial RR24 concentration on the RR24 adsorption capacity of biochars. The RR24 adsorption isotherm and kinetic data on SBB, SBB-ZnO3, CRHB, and CRHB-ZnO3 were analyzed. Results indicate that SB- and CRH-derived biochars with a ZnO nanoparticle loading ratio of 3 wt% could generate maximum adsorption capacities of RR24 thanks to the double growth on the BET surface of modified biochars. The RR24 adsorption capacities of CRHB-ZnO3 and SBB-ZnO3 reached 81.04 and 105.24 mg g-1, respectively, which were much higher than those of pristine CRHB and SBB (66.19 and 76.14, respectively) at an initial RR24 concentration of 250 mg L-1, pH 3, and contact time of 60 min. The adsorption of RR24 onto biochars agreed well with the pseudo-first-order model and the Langmuir isotherm. The RR24 adsorption capacity on modified biochars, which were reused after five adsorption-desorption cycles showed no insignificant drop. The main adsorption mechanisms of RR24 onto biochars were controlled by electrostatic interactions between biochars' surface positively charged functional groups with azo dye anions, pore filling, hydrogen bonding formation, and π-π interaction.